REDSTONE-FRACTIONAL-T1-MIB
AI MIB Summary
The REDSTONE-FRACTIONAL-T1-MIB enables monitoring and management of Redstone Communications Inc. hardware interfaces configured for Fractional T1 (FT1) circuits, specifically tracking line status, channel utilization, and error counters for individual DS0 timeslots within the T1 frame structure.
The Fractional T1 MIB for the Redstone Communications Inc. enterprise.
Main OID:
rsFt1MIB.1.3.6.1.4.1.2773.2.6
19
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
19 total| Object Name |
|---|
rsFt1MIBThe Fractional T1 MIB for the Redstone Communications Inc. enterprise. MODULE-IDENTITY .1.3.6.1.4.1.2773.2.6 |
rsFt1Objects OBJECT IDENTIFIER .1.3.6.1.4.1.2773.2.6.1 |
rsFt1NextIfIndexCoordinate ifIndex value allocation for entries in rsFt1IfTable. A GET of this object returns the next available ifIndex value to be used to create an entry in the associated interface table; or zero, if no valid ifIndex value is available. This object also returns a value of zero when it is the lexicographic successor of a varbind presented in an SNMP GETNEXT or GETBULK request, for which circumstance it is assumed that ifIndex allocation is unintended. Successive GETs will typically return different values, thus avoiding collisions among cooperating management clients seeking to create table entries simultaneously.ro RsNextIfIndex (REDSTONE-TC) .1.3.6.1.4.1.2773.2.6.1.1 |
rsFt1IfTableThis table contains entries for FT1 interfaces present in the system. SEQUENCE OF RsFt1IfEntry .1.3.6.1.4.1.2773.2.6.1.2 |
rsFt1IfEntryEach entry describes the characteristics of an FT1 interface. Creating/deleting entries in this table causes corresponding entries for be created /deleted in ifTable/ifXTable/rsIfTable. RsFt1IfEntry .1.3.6.1.4.1.2773.2.6.1.2.1 |
rsFt1IfIndexThe ifIndex of the FT1 interface. When creating entries in this table, suitable values for this object are determined by reading rsFt1NextIfIndex. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2773.2.6.1.2.1.1 |
rsFt1IfRowStatusControls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy To create an entry in this table, the following entry objects MUST be explicitly configured: rsFt1IfRowStatus rsFt1IfLowerIfIndex rsFt1IfTimeSlotMap In addition, when creating an entry the following conditions must hold: A value for rsFt1IfIndex must have been determined previously, by reading rsFt1NextIfIndex. The DS1 interface identified by rsFt1IfLowerIfIndex must exist. The DS0s specified in rsFt1IfTimeSlotMap must be available (unallocated) on the DS1 interface identified by rsFt1IfLowerIfIndex. A corresponding entry in ifTable/ifXTable/rsIfTable is created/destroyed as a result of creating/destroying an entry in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2773.2.6.1.2.1.2 |
rsFt1IfLowerIfIndexThe ifIndex of a DS1 interface over which this FT1 interface is to be layered. A value of zero indicates no layering. An implementation may choose to require that a nonzero value be configured at entry creation.rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.2773.2.6.1.2.1.3 |
rsFt1IfTimeSlotMapA bitmap representing the DS0s on the underlying DS1 interface that have been allocated to this FT1 interface.rw RsTimeSlotMap (REDSTONE-TC) .1.3.6.1.4.1.2773.2.6.1.2.1.4 |
rsFt1IfTimeSlotRateData rate per time slot allocated to this FT1 interface.rw Enumeration .1.3.6.1.4.1.2773.2.6.1.2.1.5 |
rsFt1IfDataPolarityPolarity of data transmitted on this FT1 interface. Inverted data is used for certain line coding configurations to ensure sufficient one's density for timing recovery by the remote end.rwobsolete Enumeration .1.3.6.1.4.1.2773.2.6.1.2.1.6 |
rsFt1IfLoopbackConfigSelects loopback configuration. loop(1) causes received data to be looped back out the transmitter.rw Enumeration .1.3.6.1.4.1.2773.2.6.1.2.1.7 |
rsFt1Conformance OBJECT IDENTIFIER .1.3.6.1.4.1.2773.2.6.4 |
rsFt1Compliances OBJECT IDENTIFIER .1.3.6.1.4.1.2773.2.6.4.1 |
rsFt1ComplianceThe compliance statement for entities which implement the Redstone FT1 MIB.obsolete Unknown .1.3.6.1.4.1.2773.2.6.4.1.1 |
rsFt1Compliance2The compliance statement for entities which implement the Redstone FT1 MIB. Unknown .1.3.6.1.4.1.2773.2.6.4.1.2 |
rsFt1Groups OBJECT IDENTIFIER .1.3.6.1.4.1.2773.2.6.4.2 |
rsFt1GroupA collection of objects providing management of FT1 interfaces in a Redstone product.obsolete Unknown .1.3.6.1.4.1.2773.2.6.4.2.1 |
rsFt1Group2A collection of objects providing management of FT1 interfaces in a Redstone product. Unknown .1.3.6.1.4.1.2773.2.6.4.2.2 |