REDSTONE-DS3-MIB
The REDSTONE-DS3-MIB enables monitoring and management of Redstone Communications DS3 (Digital Signal Level 3) interface statistics, including line status, error counts, and signal quality metrics. This module provides vendor-specific extensions for tracking DS3 physical layer performance and fault conditions on Redstone hardware.
Imported Objects
Objects
12 total| Object Name |
|---|
rsDs3MIBThe DS3 MIB for the Redstone Communications Inc. enterprise. MODULE-IDENTITY .1.3.6.1.4.1.2773.2.4 |
rsDs3Objects OBJECT IDENTIFIER .1.3.6.1.4.1.2773.2.4.1 |
rsDsx3ConfigTableThis table contains entries for DS3/E3 interfaces present in the system. SEQUENCE OF RsDsx3ConfigEntry .1.3.6.1.4.1.2773.2.4.1.1 |
rsDsx3ConfigEntryEach entry describes the characteristics of an DS3/E3 interface. RsDsx3ConfigEntry .1.3.6.1.4.1.2773.2.4.1.1.1 |
rsDsx3LineLengthThe length of the DS3/E3 line in meters. This objects provides information for line build out circuitry. This object is only useful if the interface has configurable line build out circuitry.rw Integer32 .1.3.6.1.4.1.2773.2.4.1.1.1.1 |
rsDsx3LineTypeThis variable indicates the variety of DS3 C-bit or E3 application implementing this interface. The type of interface affects the interpretation of the usage and error statistics. The rate of DS3 is 44.736 Mbps and E3 is 34.368 Mbps. The dsx3ClearChannel value means that the C-bits are not used except for sending/receiving AIS. Note that this object represents the actual line type when the corresponding value of dsx3LineType is dsx3other(1). The values, in sequence, describe: TITLE: SPECIFICATION: dsx3M23 ANSI T1.107-1988 dsx3SYNTRAN ANSI T1.107-1988 dsx3CbitParity ANSI T1.107a-1989 dsx3ClearChannel ANSI T1.102-1987 e3G832 ITU-T G.832 e3Framed ITU-T G.751 e3Plcp ETSI T/NA(91)18. dsx3M23Plcp ATM Forum af-phy-0054.000 dsx3CbitParityPlcp ATM Forum af-phy-0054.000rw Enumeration .1.3.6.1.4.1.2773.2.4.1.1.1.2 |
rsDsx3CellScramblerConfigThis variable indicates the state of the ATM cell scrambler for interfaces which support ATM over DS3 or E3. For interfaces which do not support ATM, this object returns the value notSupported(3).rw Enumeration .1.3.6.1.4.1.2773.2.4.1.1.1.3 |
rsDs3Conformance OBJECT IDENTIFIER .1.3.6.1.4.1.2773.2.4.4 |
rsDs3Compliances OBJECT IDENTIFIER .1.3.6.1.4.1.2773.2.4.4.1 |
rsDs3ComplianceThe compliance statement for entities which implement the Redstone DS3/E3 MIB. Unknown .1.3.6.1.4.1.2773.2.4.4.1.1 |
rsDs3Groups OBJECT IDENTIFIER .1.3.6.1.4.1.2773.2.4.4.2 |
rsDs3GroupA collection of objects providing management of DS3/E3 interfaces in a Redstone product. Unknown .1.3.6.1.4.1.2773.2.4.4.2.1 |
More MIBs from Redstone
Browse all RedstoneMIBs →The REDSTONE-PPP-MIB provides vendor-specific management objects for monitoring Point-to-Point Protocol (PPP) interface states, session statistics, and error counters on Redstone Communications Inc. hardware. This module enables the tracking of link establishment failures, authentication status, and data throughput metrics specific to Redstone's PPP implementations.
The REDSTONE-FRAME-RELAY-MIB enables monitoring and management of Frame Relay interface statistics, DLCI status, and traffic counters on Redstone Communications Inc. networking hardware. This module provides standard SNMP access to Layer 2 Frame Relay protocol states and performance metrics specific to the vendor's equipment.
The REDSTONE-RADIUS-CLIENT-MIB enables monitoring and management of Redstone Communications RADIUS client instances, specifically tracking authentication session states, request/reply counters, and client connectivity status for enterprise AAA infrastructure.
SNMP MIB module
SNMP MIB module
The REDSTONE-ATM-MIB provides vendor-specific management interfaces for Redstone Communications ATM switches, enabling the monitoring of Asynchronous Transfer Mode cell traffic statistics, interface status, and virtual circuit configurations. This module facilitates the collection of standard ATM performance counters and error metrics required for troubleshooting and capacity planning within Redstone ATM network infrastructure.