REDSTONE-DS1-MIB
Imported Objects
Objects
17 total| Object Name |
|---|
rsDs1MIBThe T1 MIB for the Redstone Communications Inc. enterprise. MODULE-IDENTITY .1.3.6.1.4.1.2773.2.5 |
rsDs1Objects OBJECT IDENTIFIER .1.3.6.1.4.1.2773.2.5.1 |
rsDsx1ConfigTableThis table contains entries for DS1/E1 interfaces present in the system. SEQUENCE OF RsDsx1ConfigEntry .1.3.6.1.4.1.2773.2.5.1.1 |
rsDsx1ConfigEntryEach entry describes the characteristics of an DS1/E1 interface. RsDsx1ConfigEntry .1.3.6.1.4.1.2773.2.5.1.1.1 |
rsDsx1TimeSlotMapA bitmap representing the timeslots on the DS1/E1 interface that have been allocated for service. For channelized DS1/E1, set bits reflect the union of timeslot allocations across all fractional arrangements operating over this DS1/E1 interface. For unchannelized DS1/E1, all relevant timeslot bits will be set.ro RsTimeSlotMap (REDSTONE-TC) .1.3.6.1.4.1.2773.2.5.1.1.1.1 |
rsDsx1Ds1ChannelNumberThis variable represents the channel number of the DS1/E1 on its parent DS3/E3. A value of 0 indicates this DS1/E1 does not have a parent DS3/E3.ro Integer32 .1.3.6.1.4.1.2773.2.5.1.1.1.2 |
rsDsx1CapabilitiesA value which indicates the set of capabilities of the DS1/E1 interface. The value is a sum. This sum initially takes the value zero, Then, for each capability, C, in the range 1 through 3, that this interface supports, 2 raised to (C - 1) is added to the sum. For example, an interface which is only E1 capable would have a value of 2 (2^(2-1)). In contrast, an interface which is both T1 and J1 capable would have a value of 5 (2^(1-1) + 2^(3-1)). The values for DS1/E1 interface capabilities are as follows: capability function 1 T1 2 E1 3 J1ro Integer32 .1.3.6.1.4.1.2773.2.5.1.1.1.3 |
rsDsx1ModeThis variable represents the DS1/E1 interface mode. The value of the rsDsx1Capabilities object for the DS1/E1 interface indicates the valid set of values for this object.rw Enumeration .1.3.6.1.4.1.2773.2.5.1.1.1.4 |
rsDsx1LineBuildOutCapabilitiesA value which indicates the set of line build out capabilities of the DS1/E1 interface. The value is a sum. This sum initially takes the value zero, Then, for each line build out capability, C, in the range 1 or 2, that this interface supports, 2 raised to (C - 1) is added to the sum. For example, an interface which is only short haul capable would have a value of 2 (2^(2-1)). In contrast, an interface which is both short haul and long haul capable would have a value of 3 (2^(1-1) + 2^(2-1)). The values for DS1/E1 interface line build out capabilities are as follows: line build out capability function 1 short haul 2 long haulro Integer32 .1.3.6.1.4.1.2773.2.5.1.1.1.5 |
rsDsx1LineBuildOutTypeThis variable represents the configured line build out type of the DS1/E1 interface. The value of the rsDsx1LineBuildOutCapabilities object for the DS1/E1 interface indicates the valid set of values for this object.rw Enumeration .1.3.6.1.4.1.2773.2.5.1.1.1.6 |
rsDsx1LineAttenuationThis variable represents the configured line attenuation of the DS1/E1 interface. Note that the value of this object only takes effect when the value of the rsDsx1LineBuildOutType for the DS1/E1 interface is set to longHaul(2).rw Enumeration .1.3.6.1.4.1.2773.2.5.1.1.1.7 |
rsDsx1LineLengthThis variable represents the length of the DS1/E1 line in meters. Note that the value of this object only takes effect when the value of the rsDsx1LineBuildOutType for the DS1/E1 interface is set to shortHaul(1).rw Integer32 .1.3.6.1.4.1.2773.2.5.1.1.1.8 |
rsDs1Conformance OBJECT IDENTIFIER .1.3.6.1.4.1.2773.2.5.4 |
rsDs1Compliances OBJECT IDENTIFIER .1.3.6.1.4.1.2773.2.5.4.1 |
rsDs1ComplianceThe compliance statement for entities which implement the Redstone DS1/E1 MIB. Unknown .1.3.6.1.4.1.2773.2.5.4.1.1 |
rsDs1Groups OBJECT IDENTIFIER .1.3.6.1.4.1.2773.2.5.4.2 |
rsDs1GroupA collection of objects providing management of DS1/E1 interfaces in a Redstone product. Unknown .1.3.6.1.4.1.2773.2.5.4.2.1 |
More MIBs from Redstone
Browse all RedstoneMIBs →The REDSTONE-PPP-MIB provides vendor-specific management objects for monitoring Point-to-Point Protocol (PPP) interface states, session statistics, and error counters on Redstone Communications Inc. hardware. This module enables the tracking of link establishment failures, authentication status, and data throughput metrics specific to Redstone's PPP implementations.
The REDSTONE-FRAME-RELAY-MIB enables monitoring and management of Frame Relay interface statistics, DLCI status, and traffic counters on Redstone Communications Inc. networking hardware. This module provides standard SNMP access to Layer 2 Frame Relay protocol states and performance metrics specific to the vendor's equipment.
The REDSTONE-RADIUS-CLIENT-MIB enables monitoring and management of Redstone Communications RADIUS client instances, specifically tracking authentication session states, request/reply counters, and client connectivity status for enterprise AAA infrastructure.
SNMP MIB module
SNMP MIB module
The REDSTONE-ATM-MIB provides vendor-specific management interfaces for Redstone Communications ATM switches, enabling the monitoring of Asynchronous Transfer Mode cell traffic statistics, interface status, and virtual circuit configurations. This module facilitates the collection of standard ATM performance counters and error metrics required for troubleshooting and capacity planning within Redstone ATM network infrastructure.