RAQMON-MIB
AI MIB Summary
The RAQMON-MIB facilitates the monitoring of Real-Time Application Quality of Service (QoS) parameters, specifically tracking session-level metrics such as packet loss, jitter, latency, and throughput for applications like VoIP and video conferencing. It enables network management systems to collect and analyze performance data defined in RFC 4711 to assess the delivery quality of real-time traffic flows across IP networks.
Real-Time Application QoS Monitoring MIB. Copyright (c) The Internet Society (2006). This version of this MIB module is part of RFC 4711; See the RFC itself for full legal notices.
Main OID:
raqmonMIB.1.3.6.1.2.1.16.31
91
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
91 total| Object Name |
|---|
raqmonMIBReal-Time Application QoS Monitoring MIB. Copyright (c) The Internet Society (2006). This version of this MIB module is part of RFC 4711; See the RFC itself for full legal notices. MODULE-IDENTITY .1.3.6.1.2.1.16.31 |
raqmonNotifications OBJECT IDENTIFIER .1.3.6.1.2.1.16.31.0 |
raqmonSessionAlarmA notification generated by an entry in the raqmonSessionExceptionTable. NOTIFICATION-TYPE .1.3.6.1.2.1.16.31.0.1 |
raqmonMIBObjects OBJECT IDENTIFIER .1.3.6.1.2.1.16.31.1 |
raqmonSession OBJECT IDENTIFIER .1.3.6.1.2.1.16.31.1.1 |
raqmonParticipantTableThis table contains information about participants in both active and closed (terminated) sessions. SEQUENCE OF RaqmonParticipantEntry .1.3.6.1.2.1.16.31.1.1.1 |
raqmonParticipantEntryEach row contains information for a single session (application) run by one participant. Indexation by the start time of the session aims to ease sorting by management applications. Agents MUST NOT report identical start times for any two sessions on the same host. Rows are removed for inactive sessions when implementation-specific age or space limits are reached. RaqmonParticipantEntry .1.3.6.1.2.1.16.31.1.1.1.1 |
raqmonParticipantStartDateThe date and time of this entry. It will be the date and time of the first report received. DateAndTime (SNMPv2-TC) .1.3.6.1.2.1.16.31.1.1.1.1.1 |
raqmonParticipantIndexThe index of the conceptual row, which is for SNMP purposes only and has no relation to any protocol value. There is no requirement that these rows be created or maintained sequentially. The index will be unique for a particular date and time. Unsigned32 .1.3.6.1.2.1.16.31.1.1.1.1.2 |
raqmonParticipantReportCapsThe Report capabilities of the participant, as perceived by the Collector. If the participant can report the Data Source Name as defined in [RFC4710], Section 5.3, then the raqmonPartRepDsrcName bit will be set. If the participant can report the Receiver Name as defined in [RFC4710], Section 5.4, then the raqmonPartRepRecvName bit will be set. If the participant can report the Data Source Port as defined in [RFC4710], Section 5.5, then the raqmonPartRepDsrcPort bit will be set. If the participant can report the Receiver Port as defined in [RFC4710], Section 5.6, then the raqmonPartRepRecvPort bit will be set. If the participant can report the Session Setup Time as defined in [RFC4710], Section 5.7, then the raqmonPartRepSetupTime bit will be set. If the participant can report the Session Setup Delay as defined in [RFC4710], Section 5.8, then the raqmonPartRepSetupDelay bit will be set. If the participant can report the Session Duration as defined in [RFC4710], Section 5.9, then the raqmonPartRepSessionDuration bit will be set. If the participant can report the Setup Status as defined in [RFC4710], Section 5.10, then the raqmonPartRepSetupStatus bit will be set. If the participant can report the Round-Trip End-to-end Network Delay as defined in [RFC4710], Section 5.11, then the raqmonPartRepRTEnd2EndNetDelay bit will be set. If the participant can report the One-way End-to-end Network Delay as defined in [RFC4710], Section 5.12, then the raqmonPartRepOWEnd2EndNetDelay bit will be set. If the participant can report the Application Delay as defined in [RFC4710], Section 5.13, then the raqmonPartApplicationDelay bit will be set. If the participant can report the Inter-Arrival Jitter as defined in [RFC4710], Section 5.14, then the raqmonPartRepIAJitter bit will be set. If the participant can report the IP Packet Delay Variation as defined in [RFC4710], Section 5.15, then the raqmonPartRepIPDV bit will be set. If the participant can report the number of application packets received as defined in [RFC4710], Section 5.16, then the raqmonPartRepRcvdPackets bit will be set. If the participant can report the number of application octets received as defined in [RFC4710], Section 5.17, then the raqmonPartRepRcvdOctets bit will be set. If the participant can report the number of application packets sent as defined in [RFC4710], Section 5.18, then the raqmonPartRepSentPackets bit will be set. If the participant can report the number of application octets sent as defined in [RFC4710], Section 5.19, then the raqmonPartRepSentOctets bit will be set. If the participant can report the number of cumulative packets lost as defined in [RFC4710], Section 5.20, then the raqmonPartRepCumPacketsLoss bit will be set. If the participant can report the fraction of packet loss as defined in [RFC4710], Section 5.21, then the raqmonPartRepFractionPacketsLoss bit will be set. If the participant can report the number of cumulative discards as defined in [RFC4710], Section 5.22, then the raqmonPartRepCumDiscards bit will be set. If the participant can report the fraction of discards as defined in [RFC4710], Section 5.23, then the raqmonPartRepFractionDiscards bit will be set. If the participant can report the Source Payload Type as defined in [RFC4710], Section 5.24, then the raqmonPartRepSrcPayloadType bit will be set. If the participant can report the Destination Payload Type as defined in [RFC4710], Section 5.25, then the raqmonPartRepDestPayloadType bit will be set. If the participant can report the Source Layer 2 Priority as defined in [RFC4710], Section 5.26, then the raqmonPartRepSrcLayer2Priority bit will be set. If the participant can report the Source DSCP/ToS value as defined in [RFC4710], Section 5.27, then the raqmonPartRepSrcToSDscp bit will be set. If the participant can report the Destination Layer 2 Priority as defined in [RFC4710], Section 5.28, then the raqmonPartRepDestLayer2Priority bit will be set. If the participant can report the Destination DSCP/ToS Value as defined in [RFC4710], Section 5.29, then the raqmonPartRepDestToSDscp bit will be set. If the participant can report the CPU utilization as defined in [RFC4710], Section 5.30, then the raqmonPartRepCPU bit will be set. If the participant can report the memory utilization as defined in [RFC4710], Section 5.31, then the raqmonPartRepMemory bit will be set. If the participant can report the Application Name as defined in [RFC4710], Section 5.32, then the raqmonPartRepAppName bit will be set. The capability of reporting of a specific metric does not mandate that the metric must be reported permanently by the data source to the respective collector. Some data sources MAY be configured not to send a metric, or some metrics may not be relevant to the specific application.ro Bits .1.3.6.1.2.1.16.31.1.1.1.1.3 |
raqmonParticipantAddrTypeThe type of the Internet address of the participant for this session.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.2.1.16.31.1.1.1.1.4 |
raqmonParticipantAddrThe Internet Address of the participant for this session. Formatting of this object is determined by the value of raqmonParticipantAddrType.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.2.1.16.31.1.1.1.1.5 |
raqmonParticipantSendPortPort from which session data is sent. If the value was not reported to the collector, this object will have the value 0.ro InetPortNumber (INET-ADDRESS-MIB) .1.3.6.1.2.1.16.31.1.1.1.1.6 |
raqmonParticipantRecvPortPort on which session data is received. If the value was not reported to the collector, this object will have the value 0.ro InetPortNumber (INET-ADDRESS-MIB) .1.3.6.1.2.1.16.31.1.1.1.1.7 |
raqmonParticipantSetupDelaySession setup time. If the value was not reported to the collector, this object will have the value -1.ro Integer32 (-1|0..2147483647) UNITS "milliseconds" .1.3.6.1.2.1.16.31.1.1.1.1.8 |
raqmonParticipantNameThe data source name for the participant.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.2.1.16.31.1.1.1.1.9 |
raqmonParticipantAppNameA string giving the name and possibly the version of the application generating the stream, e.g., 'videotool 1.2.' This information may be useful for debugging purposes and is similar to the Mailer or Mail-System-Version SMTP headers. The tool value is expected to remain constant for the duration of the session.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.2.1.16.31.1.1.1.1.10 |
raqmonParticipantQosCountThe current number of entries in the raqmonQosTable for this participant and session.ro Gauge32 UNITS "entries" .1.3.6.1.2.1.16.31.1.1.1.1.11 |
raqmonParticipantEndDateThe date and time of the most recent report received.ro DateAndTime (SNMPv2-TC) .1.3.6.1.2.1.16.31.1.1.1.1.12 |
raqmonParticipantDestPayloadTypeDestination Payload Type. If the value was not reported to the collector, this object will have the value -1.ro Integer32 (-1|0..127) .1.3.6.1.2.1.16.31.1.1.1.1.13 |
raqmonParticipantSrcPayloadTypeSource Payload Type. If the value was not reported to the collector, this object will have the value -1.ro Integer32 (-1|0..127) .1.3.6.1.2.1.16.31.1.1.1.1.14 |
raqmonParticipantActiveValue 'true' indicates that the session for this participant is active (open). Value 'false' indicates that the session is closed (terminated).ro TruthValue (SNMPv2-TC) .1.3.6.1.2.1.16.31.1.1.1.1.15 |
raqmonParticipantPeerThe pointer to the corresponding entry in this table for the other peer participant. If there is no such entry in the participant table of the collector represented by this SNMP agent, then the value will be { 0 0 }.ro RowPointer (SNMPv2-TC) .1.3.6.1.2.1.16.31.1.1.1.1.16 |
raqmonParticipantPeerAddrTypeThe type of the Internet address of the peer participant for this session.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.2.1.16.31.1.1.1.1.17 |
raqmonParticipantPeerAddrThe Internet Address of the peer participant for this session. Formatting of this object is determined by the value of raqmonParticipantPeerAddrType.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.2.1.16.31.1.1.1.1.18 |
raqmonParticipantSrcL2PrioritySource Layer 2 Priority. If the value was not reported to the collector, this object will have the value -1.ro Integer32 (-1|0..7) .1.3.6.1.2.1.16.31.1.1.1.1.19 |
raqmonParticipantDestL2PriorityDestination Layer 2 Priority. If the value was not reported to the collector, this object will have the value -1.ro Integer32 (-1|0..7) .1.3.6.1.2.1.16.31.1.1.1.1.20 |
raqmonParticipantSrcDSCPSource Layer 3 DSCP value. If the value was not reported to the collector, this object will have the value -1.ro Integer32 (-1|0..63) .1.3.6.1.2.1.16.31.1.1.1.1.21 |
raqmonParticipantDestDSCPDestination Layer 3 DSCP value.ro Integer32 (-1|0..63) .1.3.6.1.2.1.16.31.1.1.1.1.22 |
raqmonParticipantCpuMeanMean CPU utilization. If the value was not reported to the collector, this object will have the value -1.ro Integer32 (-1|0..100) UNITS "percents" .1.3.6.1.2.1.16.31.1.1.1.1.23 |
raqmonParticipantCpuMinMinimum CPU utilization. If the value was not reported to the collector, this object will have the value -1.ro Integer32 (-1|0..100) UNITS "percents" .1.3.6.1.2.1.16.31.1.1.1.1.24 |
raqmonParticipantCpuMaxMaximum CPU utilization. If the value was not reported to the collector, this object will have the value -1.ro Integer32 (-1|0..100) UNITS "percents" .1.3.6.1.2.1.16.31.1.1.1.1.25 |
raqmonParticipantMemoryMeanMean memory utilization. If the value was not reported to the collector, this object will have the value -1.ro Integer32 (-1|0..100) UNITS "percents" .1.3.6.1.2.1.16.31.1.1.1.1.26 |
raqmonParticipantMemoryMinMinimum memory utilization. If the value was not reported to the collector, this object will have the value -1.ro Integer32 (-1|0..100) UNITS "percents" .1.3.6.1.2.1.16.31.1.1.1.1.27 |
raqmonParticipantMemoryMaxMaximum memory utilization. If the value was not reported to the collector, this object will have the value -1.ro Integer32 (-1|0..100) UNITS "percents" .1.3.6.1.2.1.16.31.1.1.1.1.28 |
raqmonParticipantNetRTTMeanMean round-trip end-to-end network delay over the entire session. If the value was not reported to the collector, this object will have the value -1.ro Integer32 (-1|0..2147483647) UNITS "milliseconds" .1.3.6.1.2.1.16.31.1.1.1.1.29 |
raqmonParticipantNetRTTMinMinimum round-trip end-to-end network delay over the entire session. If the value was not reported to the collector, this object will have the value -1.ro Integer32 (-1|0..2147483647) UNITS "milliseconds" .1.3.6.1.2.1.16.31.1.1.1.1.30 |
raqmonParticipantNetRTTMaxMaximum round-trip end-to-end network delay over the entire session. If the value was not reported to the collector, this object will have the value -1.ro Integer32 (-1|0..2147483647) UNITS "milliseconds" .1.3.6.1.2.1.16.31.1.1.1.1.31 |
raqmonParticipantIAJitterMeanMean inter-arrival jitter over the entire session. If the value was not reported to the collector, this object will have the value -1.ro Integer32 (-1|0..2147483647) UNITS "milliseconds" .1.3.6.1.2.1.16.31.1.1.1.1.32 |
raqmonParticipantIAJitterMinMinimum inter-arrival jitter over the entire session. If the value was not reported to the collector, this object will have the value -1.ro Integer32 (-1|0..2147483647) UNITS "milliseconds" .1.3.6.1.2.1.16.31.1.1.1.1.33 |
raqmonParticipantIAJitterMaxMaximum inter-arrival jitter over the entire session. If the value was not reported to the collector, this object will have the value -1.ro Integer32 (-1|0..2147483647) UNITS "milliseconds" .1.3.6.1.2.1.16.31.1.1.1.1.34 |
raqmonParticipantIPDVMeanMean IP packet delay variation over the entire session. If the value was not reported to the collector, this object will have the value -1.ro Integer32 (-1|0..2147483647) UNITS "milliseconds" .1.3.6.1.2.1.16.31.1.1.1.1.35 |
raqmonParticipantIPDVMinMinimum IP packet delay variation over the entire session. If the value was not reported to the collector, this object will have the value -1.ro Integer32 (-1|0..2147483647) UNITS "milliseconds" .1.3.6.1.2.1.16.31.1.1.1.1.36 |
raqmonParticipantIPDVMaxMaximum IP packet delay variation over the entire session. If the value was not reported to the collector, this object will have the value -1.ro Integer32 (-1|0..2147483647) UNITS "milliseconds" .1.3.6.1.2.1.16.31.1.1.1.1.37 |
raqmonParticipantNetOwdMeanMean Network one-way delay over the entire session. If the value was not reported to the collector, this object will have the value -1.ro Integer32 (-1|0..2147483647) UNITS "milliseconds" .1.3.6.1.2.1.16.31.1.1.1.1.38 |
raqmonParticipantNetOwdMinMinimum Network one-way delay over the entire session. If the value was not reported to the collector, this object will have the value -1.ro Integer32 (-1|0..2147483647) UNITS "milliseconds" .1.3.6.1.2.1.16.31.1.1.1.1.39 |
raqmonParticipantNetOwdMaxMaximum Network one-way delay over the entire session. If the value was not reported to the collector, this object will have the value -1.ro Integer32 (-1|0..2147483647) UNITS "milliseconds" .1.3.6.1.2.1.16.31.1.1.1.1.40 |
raqmonParticipantAppDelayMeanMean application delay over the entire session. If the value was not reported to the collector, this object will have the value -1.ro Integer32 (-1|0..2147483647) UNITS "milliseconds" .1.3.6.1.2.1.16.31.1.1.1.1.41 |
raqmonParticipantAppDelayMinMinimum application delay over the entire session. If the value was not reported to the collector, this object will have the value -1.ro Integer32 (-1|0..2147483647) UNITS "milliseconds" .1.3.6.1.2.1.16.31.1.1.1.1.42 |
raqmonParticipantAppDelayMaxMaximum application delay over the entire session. If the value was not reported to the collector, this object will have the value -1.ro Integer32 (-1|0..2147483647) UNITS "milliseconds" .1.3.6.1.2.1.16.31.1.1.1.1.43 |
raqmonParticipantPacketsRcvdCount of packets received for the entire session. If the value was not reported to the collector, this object will have the value -1.ro Integer32 (-1|0..2147483647) UNITS "packets" .1.3.6.1.2.1.16.31.1.1.1.1.44 |
raqmonParticipantPacketsSentCount of packets sent for the entire session. If the value was not reported to the collector, this object will have the value -1.ro Integer32 (-1|0..2147483647) UNITS "packets" .1.3.6.1.2.1.16.31.1.1.1.1.45 |
raqmonParticipantOctetsRcvdCount of octets received for the entire session. If the value was not reported to the collector, this object will have the value -1.ro Integer32 (-1|0..2147483647) UNITS "Octets" .1.3.6.1.2.1.16.31.1.1.1.1.46 |
raqmonParticipantOctetsSentCount of octets sent for the entire session. If the value was not reported to the collector, this object will have the value -1.ro Integer32 (-1|0..2147483647) UNITS "Octets" .1.3.6.1.2.1.16.31.1.1.1.1.47 |
raqmonParticipantLostPacketsCount of packets lost by this receiver for the entire session. If the value was not reported to the collector, this object will have the value -1.ro Integer32 (-1|0..2147483647) UNITS "packets" .1.3.6.1.2.1.16.31.1.1.1.1.48 |
raqmonParticipantLostPacketsFrctFraction of lost packets out of total packets received. If the value was not reported to the collector, this object will have the value -1.ro Integer32 (-1|0..100) UNITS "percents" .1.3.6.1.2.1.16.31.1.1.1.1.49 |
raqmonParticipantDiscardsCount of packets discarded by this receiver for the entire session. If the value was not reported to the collector, this object will have the value -1.ro Integer32 (-1|0..2147483647) UNITS "packets" .1.3.6.1.2.1.16.31.1.1.1.1.50 |
raqmonParticipantDiscardsFrctFraction of discarded packets out of total packets received. If the value was not reported to the collector, this object will have the value -1.ro Integer32 (-1|0..100) UNITS "percents" .1.3.6.1.2.1.16.31.1.1.1.1.51 |
raqmonQosTableTable of historical information about quality-of-service data during sessions. SEQUENCE OF RaqmonQosEntry .1.3.6.1.2.1.16.31.1.1.2 |
raqmonQosEntryEach entry contains information from a single RAQMON packet, related to a single session (application) run by one participant. Indexation by the start time of the session aims to ease sorting by management applications. Agents MUST NOT report identical start times for any two sessions on the same host. Rows are removed for inactive sessions when implementation-specific time or space limits are reached. RaqmonQosEntry .1.3.6.1.2.1.16.31.1.1.2.1 |
raqmonQosTimeTime of this entry measured from the start of the corresponding participant session. Unsigned32 .1.3.6.1.2.1.16.31.1.1.2.1.1 |
raqmonQoSEnd2EndNetDelayThe round-trip time. Will contain the previous value if there was no report for this time, or -1 if the value has never been reported.ro Integer32 (-1 | 0..2147483647) UNITS "milliseconds" .1.3.6.1.2.1.16.31.1.1.2.1.2 |
raqmonQoSInterArrivalJitterAn estimate of delay variation as observed by this receiver. Will contain the previous value if there was no report for this time, or -1 if the value has never been reported.ro Integer32 (-1 | 0..2147483647) UNITS "milliseconds" .1.3.6.1.2.1.16.31.1.1.2.1.3 |
raqmonQosRcvdPacketsCount of packets received by this receiver since the previous entry. Will contain the previous value if there was no report for this time, or -1 if the value has never been reported.ro Integer32 (-1 | 0..2147483647) UNITS "packets" .1.3.6.1.2.1.16.31.1.1.2.1.4 |
raqmonQosRcvdOctetsCount of octets received by this receiver since the previous report. Will contain the previous value if there was no report for this time, or -1 if the value has never been reported.ro Integer32 (-1 | 0..2147483647) UNITS "octets" .1.3.6.1.2.1.16.31.1.1.2.1.5 |
raqmonQosSentPacketsCount of packets sent since the previous report. Will contain the previous value if there was no report for this time, or -1 if the value has never been reported.ro Integer32 (-1 | 0..2147483647) UNITS "packets" .1.3.6.1.2.1.16.31.1.1.2.1.6 |
raqmonQosSentOctetsCount of octets sent since the previous report. Will contain the previous value if there was no report for this time, or -1 if the value has never been reported.ro Integer32 (-1 | 0..2147483647) UNITS "octets" .1.3.6.1.2.1.16.31.1.1.2.1.7 |
raqmonQosLostPacketsA count of packets lost as observed by this receiver since the previous report. Will contain the previous value if there was no report for this time, or -1 if the value has never been reported.ro Integer32 (-1 | 0..2147483647) UNITS "packets" .1.3.6.1.2.1.16.31.1.1.2.1.8 |
raqmonQosSessionStatusThe session status. Will contain the previous value if there was no report for this time or the zero-length string if no value was ever reported.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.2.1.16.31.1.1.2.1.9 |
raqmonParticipantAddrTableMaps raqmonParticipantAddr to the index of the raqmonParticipantTable. This table allows management applications to find entries sorted by raqmonParticipantAddr rather than raqmonParticipantStartDate. SEQUENCE OF RaqmonParticipantAddrEntry .1.3.6.1.2.1.16.31.1.1.3 |
raqmonParticipantAddrEntryEach entry corresponds to exactly one entry in the raqmonParticipantEntry: the entry containing the index pair raqmonParticipantStartDate, raqmonParticipantIndex. Note that there is no concern about the indexation of this table exceeding the limits defined by RFC 2578, Section 3.5. According to [RFC4710], Section 5.1, only IPv4 and IPv6 addresses can be reported as participant addresses. RaqmonParticipantAddrEntry .1.3.6.1.2.1.16.31.1.1.3.1 |
raqmonParticipantAddrEndDateThe value of raqmonParticipantEndDate for the corresponding raqmonParticipantEntry.ro DateAndTime (SNMPv2-TC) .1.3.6.1.2.1.16.31.1.1.3.1.1 |
raqmonException OBJECT IDENTIFIER .1.3.6.1.2.1.16.31.1.2 |
raqmonSessionExceptionTableThis table defines thresholds for the management station to get notifications about sessions that encountered poor quality of service. The information in this table MUST be persistent across agent reboots. SEQUENCE OF RaqmonSessionExceptionEntry .1.3.6.1.2.1.16.31.1.2.2 |
raqmonSessionExceptionEntryA conceptual row in the raqmonSessionExceptionTable. RaqmonSessionExceptionEntry .1.3.6.1.2.1.16.31.1.2.2.1 |
raqmonSessionExceptionIndexAn index that uniquely identifies an entry in the raqmonSessionExceptionTable. Management applications can determine unused indices by performing GetNext or GetBulk operations on the Table. Unsigned32 .1.3.6.1.2.1.16.31.1.2.2.1.2 |
raqmonSessionExceptionIAJitterThresholdThreshold for jitter. The value during a session must be greater than or equal to this value for an exception to be created.rw Unsigned32 UNITS "milliseconds" .1.3.6.1.2.1.16.31.1.2.2.1.3 |
raqmonSessionExceptionNetRTTThresholdThreshold for round-trip time. The value during a session must be greater than or equal to this value for an exception to be created.rw Unsigned32 UNITS "milliseconds" .1.3.6.1.2.1.16.31.1.2.2.1.4 |
raqmonSessionExceptionLostPacketsThresholdThreshold for lost packets in units of tenths of a percent. The value during a session must be greater than or equal to this value for an exception to be created.rw Unsigned32 .1.3.6.1.2.1.16.31.1.2.2.1.5 |
raqmonSessionExceptionRowStatusThis object has a value of 'active' when exceptions are being monitored by the system. A newly-created conceptual row must have all the read-create objects initialized before becoming 'active'. A conceptual row that is in the 'notReady' or 'notInService' state MAY be removed after 5 minutes. No writeable objects can be changed while the row is active.rw RowStatus (SNMPv2-TC) .1.3.6.1.2.1.16.31.1.2.2.1.7 |
raqmonConfig OBJECT IDENTIFIER .1.3.6.1.2.1.16.31.1.3 |
raqmonConfigPortThe UDP port to listen on for RAQMON reports, running on transport protocols other than SNMP. If the RAQMON PDU transport protocol is SNMP, a write operation on this object has no effect, as the standard port 162 is always used. The value of this object MUST be persistent across agent reboots.rw InetPortNumber (INET-ADDRESS-MIB) .1.3.6.1.2.1.16.31.1.3.1 |
raqmonConfigPduTransportThe PDU transport(s) used by this collector. If other(0) is set, the collector supports a transport other than SNMP or TCP. If tcp(1) is set, the collector supports TCP as a transport protocol. If snmp(2) is set, the collector supports SNMP as a transport protocol.ro Bits .1.3.6.1.2.1.16.31.1.3.2 |
raqmonConfigRaqmonPdusCount of RAQMON PDUs received by the Collector.ro Counter32 UNITS "PDUs" .1.3.6.1.2.1.16.31.1.3.3 |
raqmonConfigRDSTimeoutThe number of seconds since the reception of the last RAQMON PDU from a RDS after which a session between the respective RDS and the collector will be considered terminated. The value of this object MUST be persistent across agent reboots.rw Unsigned32 .1.3.6.1.2.1.16.31.1.3.4 |
raqmonConformance OBJECT IDENTIFIER .1.3.6.1.2.1.16.31.2 |
raqmonCompliances OBJECT IDENTIFIER .1.3.6.1.2.1.16.31.2.1 |
raqmonComplianceDescribes the requirements for conformance to the RAQMON MIB. Unknown .1.3.6.1.2.1.16.31.2.1.1 |
raqmonGroups OBJECT IDENTIFIER .1.3.6.1.2.1.16.31.2.2 |
raqmonCollectorGroupObjects used in RAQMON by a collector. Unknown .1.3.6.1.2.1.16.31.2.2.1 |
raqmonCollectorNotificationsGroupNotifications emitted by a RAQMON collector. Unknown .1.3.6.1.2.1.16.31.2.2.2 |