PWTv1-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for PWTv1-MIB.
590
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
590 total| Object Name |
|---|
powertek OBJECT IDENTIFIER .1.3.6.1.4.1.42610 |
RFC1155-SMI Unknown .1.3.6.1.4.1.42610 |
product OBJECT IDENTIFIER .1.3.6.1.4.1.42610.1 |
pdu OBJECT IDENTIFIER .1.3.6.1.4.1.42610.1.4 |
pwt OBJECT IDENTIFIER .1.3.6.1.4.1.42610.1.4.4 |
pduObjects OBJECT IDENTIFIER .1.3.6.1.4.1.42610.1.4.4.1 |
pduIdent OBJECT IDENTIFIER .1.3.6.1.4.1.42610.1.4.4.1.1 |
pduIdentAgentSoftwareVersionThe firmware version of the device.ro DisplayString .1.3.6.1.4.1.42610.1.4.4.1.1.1 |
pduIdentSerialNumberA Model of this device.ro DisplayString .1.3.6.1.4.1.42610.1.4.4.1.1.2 |
pduNetwork OBJECT IDENTIFIER .1.3.6.1.4.1.42610.1.4.4.1.2 |
pduNetworkTcpip OBJECT IDENTIFIER .1.3.6.1.4.1.42610.1.4.4.1.2.1 |
pduNetworkTcpipDhcpControlEnable/disable DHCP protocolrw Enumeration .1.3.6.1.4.1.42610.1.4.4.1.2.1.1 |
pduNetworkTcpipIpv4 OBJECT IDENTIFIER .1.3.6.1.4.1.42610.1.4.4.1.2.1.2 |
pduNetworkTcpipIpv4AddressThe ip address that NMS can identify the managed device.rw IpAddress .1.3.6.1.4.1.42610.1.4.4.1.2.1.2.1 |
pduNetworkTcpipIpv4GatewayThe default gateway that allow device managed through routers.rw IpAddress .1.3.6.1.4.1.42610.1.4.4.1.2.1.2.2 |
pduNetworkTcpipIpv4SubnetInternet address subnet maskrw IpAddress .1.3.6.1.4.1.42610.1.4.4.1.2.1.2.3 |
pduNetworkTcpipIpv4PrimaryDNSInternet address of Primary DNS Serverrw IpAddress .1.3.6.1.4.1.42610.1.4.4.1.2.1.2.4 |
pduNetworkTcpipIpv4SecondaryDNSInternet address of Secondary DNSrw IpAddress .1.3.6.1.4.1.42610.1.4.4.1.2.1.2.5 |
pduNetworkTcpipIpv6 OBJECT IDENTIFIER .1.3.6.1.4.1.42610.1.4.4.1.2.1.3 |
pduNetworkTcpipIpv6ControlEnable/disable IPv6 protocolrw Enumeration .1.3.6.1.4.1.42610.1.4.4.1.2.1.3.1 |
pduNetworkTcpipIpv6AutoConfigIPv6 Auto-config or Maual settingrw Enumeration .1.3.6.1.4.1.42610.1.4.4.1.2.1.3.2 |
pduNetworkTcpipIpv6AddressThe ipv6 address that NMS can identify the managed device.ro DisplayString .1.3.6.1.4.1.42610.1.4.4.1.2.1.3.3 |
pduNetworkTcpipIpv6PrefixThe prefix length for ipv6 address.ro INTEGER .1.3.6.1.4.1.42610.1.4.4.1.2.1.3.4 |
pduNetworkTcpipIpv6RouterThe default gateway that allow device managed through routers.ro DisplayString .1.3.6.1.4.1.42610.1.4.4.1.2.1.3.5 |
pduNetworkTcpipIpv6PrimaryDNSInternet address of Primary DNS Serverrw DisplayString .1.3.6.1.4.1.42610.1.4.4.1.2.1.3.6 |
pduNetworkTcpipIpv6SecondaryDNSInternet address of Secondary DNSrw DisplayString .1.3.6.1.4.1.42610.1.4.4.1.2.1.3.7 |
pduNetworkSecurity OBJECT IDENTIFIER .1.3.6.1.4.1.42610.1.4.4.1.2.2 |
pduNetworkSecurityControlEnable/disable Network Access Protectionrw Enumeration .1.3.6.1.4.1.42610.1.4.4.1.2.2.1 |
pduNetworkSecuritySsh OBJECT IDENTIFIER .1.3.6.1.4.1.42610.1.4.4.1.2.2.2 |
pduNetworkSecuritySshControlEnable/disable SSH Access Protectionrw Enumeration .1.3.6.1.4.1.42610.1.4.4.1.2.2.2.1 |
pduNetworkSecuritySshIntervalDetecting Interval of SSH Access Protectionrw Enumeration .1.3.6.1.4.1.42610.1.4.4.1.2.2.2.2 |
pduNetworkSecuritySshFailTimesUnsuccessful attempts of SSH Access Protectionrw Enumeration .1.3.6.1.4.1.42610.1.4.4.1.2.2.2.3 |
pduNetworkSecuritySshBlockBlock Time of SSH Access Protectionrw Enumeration .1.3.6.1.4.1.42610.1.4.4.1.2.2.2.4 |
pduNetworkSecuritySnmp OBJECT IDENTIFIER .1.3.6.1.4.1.42610.1.4.4.1.2.2.3 |
pduNetworkSecuritySnmpControlEnable/disable SNMP Access Protectionrw Enumeration .1.3.6.1.4.1.42610.1.4.4.1.2.2.3.1 |
pduNetworkSecuritySnmpIntervalDetecting Interval of SNMP Access Protectionrw Enumeration .1.3.6.1.4.1.42610.1.4.4.1.2.2.3.2 |
pduNetworkSecuritySnmpFailTimesUnsuccessful attempts of SNMP Access Protectionrw Enumeration .1.3.6.1.4.1.42610.1.4.4.1.2.2.3.3 |
pduNetworkSecuritySnmpBlockBlock Time of SNMP Access Protectionrw Enumeration .1.3.6.1.4.1.42610.1.4.4.1.2.2.3.4 |
pduNetworkSecurityHttp OBJECT IDENTIFIER .1.3.6.1.4.1.42610.1.4.4.1.2.2.4 |
pduNetworkSecurityHttpControlEnable/disable HTTP Access Protectionrw Enumeration .1.3.6.1.4.1.42610.1.4.4.1.2.2.4.1 |
pduNetworkSecurityHttpIntervalDetecting Interval of HTTP Access Protectionrw Enumeration .1.3.6.1.4.1.42610.1.4.4.1.2.2.4.2 |
pduNetworkSecurityHttpFailTimesUnsuccessful attempts of HTTP Access Protectionrw Enumeration .1.3.6.1.4.1.42610.1.4.4.1.2.2.4.3 |
pduNetworkSecurityHttpBlockBlock Time of HTTP Access Protectionrw Enumeration .1.3.6.1.4.1.42610.1.4.4.1.2.2.4.4 |
pduNetworkService OBJECT IDENTIFIER .1.3.6.1.4.1.42610.1.4.4.1.2.3 |
pduNetworkServiceSsh OBJECT IDENTIFIER .1.3.6.1.4.1.42610.1.4.4.1.2.3.1 |
pduNetworkServiceSshControlEnable/disable SSH Server Servicerw Enumeration .1.3.6.1.4.1.42610.1.4.4.1.2.3.1.1 |
pduNetworkServiceSshPortThe Port Number of SSH Server Servicerw INTEGER .1.3.6.1.4.1.42610.1.4.4.1.2.3.1.2 |
pduNetworkServiceSsl OBJECT IDENTIFIER .1.3.6.1.4.1.42610.1.4.4.1.2.3.2 |
pduNetworkServiceSslControlEnable/disable HTTPs Server Servicerw Enumeration .1.3.6.1.4.1.42610.1.4.4.1.2.3.2.1 |
pduNetworkServiceSslPortThe Port Number of HTTPs Server Servicerw INTEGER .1.3.6.1.4.1.42610.1.4.4.1.2.3.2.2 |
pduNetworkServiceSslForceForce use HTTPs Server Service only.rw Enumeration .1.3.6.1.4.1.42610.1.4.4.1.2.3.2.3 |
pduNetworkServicePingControlEnable/disable to response to PING request.rw Enumeration .1.3.6.1.4.1.42610.1.4.4.1.2.3.3 |
pduNetworkServiceRadius OBJECT IDENTIFIER .1.3.6.1.4.1.42610.1.4.4.1.2.3.4 |
pduNetworkServiceRadiusControlEnable/disable RADIUS Client Servicerw Enumeration .1.3.6.1.4.1.42610.1.4.4.1.2.3.4.1 |
pduNetworkServiceRadiusIpThe IP Address of RADIUS Client Servicerw DisplayString .1.3.6.1.4.1.42610.1.4.4.1.2.3.4.2 |
pduNetworkServiceRadiusPortThe Port Number of RADIUS Client Servicerw INTEGER .1.3.6.1.4.1.42610.1.4.4.1.2.3.4.3 |
pduNetworkServiceRadiusSecretKeyThe Secret Key of RADIUS Client Servicerw DisplayString .1.3.6.1.4.1.42610.1.4.4.1.2.3.4.4 |
pduNetworkServiceRadiusTimeoutThe Timeout Interval of RADIUS Client Service in secondsrw INTEGER .1.3.6.1.4.1.42610.1.4.4.1.2.3.4.5 |
pduNetworkServiceRadiusRetryThe Retry Times of RADIUS Client Servicerw INTEGER .1.3.6.1.4.1.42610.1.4.4.1.2.3.4.6 |
pduSystem OBJECT IDENTIFIER .1.3.6.1.4.1.42610.1.4.4.1.3 |
pduSystemNameThe name of system.rw DisplayString .1.3.6.1.4.1.42610.1.4.4.1.3.1 |
pduSystemContactThe contact of system.rw DisplayString .1.3.6.1.4.1.42610.1.4.4.1.3.2 |
pduSystemLocationThe location of system.rw DisplayString .1.3.6.1.4.1.42610.1.4.4.1.3.3 |
pduSystemLogIntervalThe Log Interval of devicerw INTEGER .1.3.6.1.4.1.42610.1.4.4.1.3.4 |
pduSystemWebRefreshThe Web Refresh Interval of devicerw INTEGER .1.3.6.1.4.1.42610.1.4.4.1.3.5 |
pduSystemTime OBJECT IDENTIFIER .1.3.6.1.4.1.42610.1.4.4.1.3.6 |
pduSystemTimeDisplayThe date/time in agentro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.42610.1.4.4.1.3.6.1 |
pduSystemTimeZoneTime Zone to use when synchronize with NTP server.rw Enumeration .1.3.6.1.4.1.42610.1.4.4.1.3.6.2 |
pduSystemTimeFormatDate Formatrw Enumeration .1.3.6.1.4.1.42610.1.4.4.1.3.6.3 |
pduSystemTimeSettingTime Settingrw Enumeration .1.3.6.1.4.1.42610.1.4.4.1.3.6.4 |
pduSystemTimeDayLightSavingEnable/disable the Day Light Saving when synchronize with NTP server.rw Enumeration .1.3.6.1.4.1.42610.1.4.4.1.3.6.5 |
pduSystemTimeManual OBJECT IDENTIFIER .1.3.6.1.4.1.42610.1.4.4.1.3.6.6 |
pduSystemTimeManualDateThe date in agent, format is (dd/mm/yyyy)rw DisplayString .1.3.6.1.4.1.42610.1.4.4.1.3.6.6.1 |
pduSystemTimeManualTimeThe time in agent, format is (hh:mm:ss)rw DisplayString .1.3.6.1.4.1.42610.1.4.4.1.3.6.6.2 |
pduSystemTimeNtp OBJECT IDENTIFIER .1.3.6.1.4.1.42610.1.4.4.1.3.6.7 |
pduSystemTimeNtpControlEnable or disable the agent to synchronize date/time with NTP server.rw Enumeration .1.3.6.1.4.1.42610.1.4.4.1.3.6.7.1 |
pduSystemTimeNtpServerThe ip address of NTP server.rw DisplayString .1.3.6.1.4.1.42610.1.4.4.1.3.6.7.2 |
pduSystemTimeNtpSyncIntervalThe Sync Interval with NTP server.rw INTEGER .1.3.6.1.4.1.42610.1.4.4.1.3.6.7.3 |
pduSystemTimeNtpSyncUnitThe Unit of Sync Intervalrw Enumeration .1.3.6.1.4.1.42610.1.4.4.1.3.6.7.4 |
pduSystemResetToDefaultReset the parameter of PDU to default.rw Enumeration .1.3.6.1.4.1.42610.1.4.4.1.3.7 |
pduSystemRebootReboot the system of PDU.rw Enumeration .1.3.6.1.4.1.42610.1.4.4.1.3.8 |
pduSNMP OBJECT IDENTIFIER .1.3.6.1.4.1.42610.1.4.4.1.4 |
pduSnmpControlEnable/disable SNMP protocol.rw Enumeration .1.3.6.1.4.1.42610.1.4.4.1.4.1 |
pduSnmpPortThe UDP port for SNMP.rw INTEGER .1.3.6.1.4.1.42610.1.4.4.1.4.2 |
pduSnmpVersionSet SNMP version.rw Enumeration .1.3.6.1.4.1.42610.1.4.4.1.4.3 |
pduSnmpTrapsReceiversTableA list of managers to send traps to. The number of
entries is given by the value of pduSnmpNumTrapReceivers SEQUENCE OF PduSnmpTrapsReceiversEntry .1.3.6.1.4.1.42610.1.4.4.1.4.4 |
pduSnmpTrapsReceiversEntryThe managers to send traps to. PduSnmpTrapsReceiversEntry .1.3.6.1.4.1.42610.1.4.4.1.4.4.1 |
trapsIndexThe index to a trap receiver entry.ro INTEGER .1.3.6.1.4.1.42610.1.4.4.1.4.4.1.1 |
trapsReceiverAddrThe IP address of the manager to send a trap to.rw DisplayString .1.3.6.1.4.1.42610.1.4.4.1.4.4.1.2 |
receiverEventLevelThe severity level of traps to be received by this manager.rw Enumeration .1.3.6.1.4.1.42610.1.4.4.1.4.4.1.3 |
receiverSnmpVerThe SNMP Trap version of trap receivers.rw Enumeration .1.3.6.1.4.1.42610.1.4.4.1.4.4.1.4 |
receiverDescriptionDescription of trap receiversrw DisplayString .1.3.6.1.4.1.42610.1.4.4.1.4.4.1.5 |
pduEmail OBJECT IDENTIFIER .1.3.6.1.4.1.42610.1.4.4.1.5 |
pduEmailServerThe address of Email server.rw DisplayString .1.3.6.1.4.1.42610.1.4.4.1.5.1 |
pduEmailPortThe UDP port for Email Server.rw INTEGER .1.3.6.1.4.1.42610.1.4.4.1.5.2 |
pduEmailSenderEmailThe sender's Email addressrw DisplayString .1.3.6.1.4.1.42610.1.4.4.1.5.3 |
pduEmailPrefixThe prefix string of mail subjectrw DisplayString .1.3.6.1.4.1.42610.1.4.4.1.5.4 |
pduEmailAuthControlEnable/disable SMTP Authentication.rw Enumeration .1.3.6.1.4.1.42610.1.4.4.1.5.5 |
pduEmailAuthUsernameThe user name of SMTP Authenticationrw DisplayString .1.3.6.1.4.1.42610.1.4.4.1.5.6 |
pduEmailAuthPasswordThe password of SMTP Authenticationrw DisplayString .1.3.6.1.4.1.42610.1.4.4.1.5.7 |
pduEmailReceiversTableA list of managers to send email notification to. SEQUENCE OF PduEmailReceiversEntry .1.3.6.1.4.1.42610.1.4.4.1.5.8 |
pduEmailReceiversEntryThe managers to send email notification to. PduEmailReceiversEntry .1.3.6.1.4.1.42610.1.4.4.1.5.8.1 |
mailRecvIndexThe index to a email notification receiver entry.ro INTEGER .1.3.6.1.4.1.42610.1.4.4.1.5.8.1.1 |
mailRecvReceiverAddrThe Email address of the manager to send a email notification to.rw DisplayString .1.3.6.1.4.1.42610.1.4.4.1.5.8.1.2 |
mailRecvEmailTypeThe Email Type of email notification receivers.rw Enumeration .1.3.6.1.4.1.42610.1.4.4.1.5.8.1.3 |
mailRecvEventLevelThe severity level of email notification to be received by this manager.rw Enumeration .1.3.6.1.4.1.42610.1.4.4.1.5.8.1.4 |
mailRecvDescriptionDescription of email notification receiversrw DisplayString .1.3.6.1.4.1.42610.1.4.4.1.5.8.1.5 |
pduPwrMonitoring OBJECT IDENTIFIER .1.3.6.1.4.1.42610.1.4.4.1.6 |
pduPwrMonitoringInlet OBJECT IDENTIFIER .1.3.6.1.4.1.42610.1.4.4.1.6.1 |
pduPwrMonitoringInletNumThe number of Inlet.ro INTEGER .1.3.6.1.4.1.42610.1.4.4.1.6.1.1 |
pduPwrMonitoringInletStatusTableA list to display status of Inlet. SEQUENCE OF PduPwrMonitoringInletStatusEntry .1.3.6.1.4.1.42610.1.4.4.1.6.1.2 |
pduPwrMonitoringInletStatusEntryA list to display status of Inlet. PduPwrMonitoringInletStatusEntry .1.3.6.1.4.1.42610.1.4.4.1.6.1.2.1 |
inletIndexThe index to Inlet status entry.ro INTEGER .1.3.6.1.4.1.42610.1.4.4.1.6.1.2.1.1 |
inletPowerAllThe total power of inlet.ro INTEGER UNITS "0.1W" .1.3.6.1.4.1.42610.1.4.4.1.6.1.2.1.2 |
inletResetFromThe reset date of inlet.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.42610.1.4.4.1.6.1.2.1.3 |
inletEnergyThe total energy of inlet.ro INTEGER UNITS "KWh" .1.3.6.1.4.1.42610.1.4.4.1.6.1.2.1.4 |
inletStatusThe Status of inlet power.ro Enumeration .1.3.6.1.4.1.42610.1.4.4.1.6.1.2.1.5 |
inletCurrPhase1b1The phase1b1 current of inlet.ro INTEGER UNITS "0.01A" .1.3.6.1.4.1.42610.1.4.4.1.6.1.2.1.6 |
inletCurrPhase2b1The phase2b1 current of inlet.ro INTEGER UNITS "0.01A" .1.3.6.1.4.1.42610.1.4.4.1.6.1.2.1.7 |
inletCurrPhase3b1The phase3b1 current of inlet.ro INTEGER UNITS "0.01A" .1.3.6.1.4.1.42610.1.4.4.1.6.1.2.1.8 |
inletCurrPhase1b2The phase1b2 current of inlet.ro INTEGER UNITS "0.01A" .1.3.6.1.4.1.42610.1.4.4.1.6.1.2.1.9 |
inletCurrPhase2b2The phase2b2 current of inlet.ro INTEGER UNITS "0.01A" .1.3.6.1.4.1.42610.1.4.4.1.6.1.2.1.10 |
inletCurrPhase3b2The phase3b2 current of inlet.ro INTEGER UNITS "0.01A" .1.3.6.1.4.1.42610.1.4.4.1.6.1.2.1.11 |
inletCurrPhase1The phase1 current of inlet.ro INTEGER UNITS "0.01A" .1.3.6.1.4.1.42610.1.4.4.1.6.1.2.1.12 |
inletCurrPhase2The phase2 current of inlet.ro INTEGER UNITS "0.01A" .1.3.6.1.4.1.42610.1.4.4.1.6.1.2.1.13 |
inletCurrPhase3The phase3 current of inlet.ro INTEGER UNITS "0.01A" .1.3.6.1.4.1.42610.1.4.4.1.6.1.2.1.14 |
inletVoltPhase1The phase1 voltage of inlet.ro INTEGER UNITS "0.1V" .1.3.6.1.4.1.42610.1.4.4.1.6.1.2.1.15 |
inletVoltPhase2The phase2 voltage of inlet.ro INTEGER UNITS "0.1V" .1.3.6.1.4.1.42610.1.4.4.1.6.1.2.1.16 |
inletVoltPhase3The phase3 voltage of inlet.ro INTEGER UNITS "0.1V" .1.3.6.1.4.1.42610.1.4.4.1.6.1.2.1.17 |
inletPwrFactorPhase1b1The phase1b1 power factor of inlet.ro INTEGER UNITS "0.1%" .1.3.6.1.4.1.42610.1.4.4.1.6.1.2.1.18 |
inletPwrFactorPhase2b1The phase2b1 power factor of inlet.ro INTEGER UNITS "0.1%" .1.3.6.1.4.1.42610.1.4.4.1.6.1.2.1.19 |
inletPwrFactorPhase3b1The phase3b1 power factor of inlet.ro INTEGER UNITS "0.1%" .1.3.6.1.4.1.42610.1.4.4.1.6.1.2.1.20 |
inletPwrFactorPhase1b2The phase1b2 power factor of inlet.ro INTEGER UNITS "0.1%" .1.3.6.1.4.1.42610.1.4.4.1.6.1.2.1.21 |
inletPwrFactorPhase2b2The phase2b2 power factor of inlet.ro INTEGER UNITS "0.1%" .1.3.6.1.4.1.42610.1.4.4.1.6.1.2.1.22 |
inletPwrFactorPhase3b2The phase3b2 power factor of inlet.ro INTEGER UNITS "0.1%" .1.3.6.1.4.1.42610.1.4.4.1.6.1.2.1.23 |
inletPowerPhase1b1The phase1b1 active power of inlet.ro INTEGER UNITS "0.1W" .1.3.6.1.4.1.42610.1.4.4.1.6.1.2.1.24 |
inletPowerPhase2b1The phase2b1 active power of inlet.ro INTEGER UNITS "0.1W" .1.3.6.1.4.1.42610.1.4.4.1.6.1.2.1.25 |
inletPowerPhase3b1The phase3b1 active power of inlet.ro INTEGER UNITS "0.1W" .1.3.6.1.4.1.42610.1.4.4.1.6.1.2.1.26 |
inletPowerPhase1b2The phase1b2 active power of inlet.ro INTEGER UNITS "0.1W" .1.3.6.1.4.1.42610.1.4.4.1.6.1.2.1.27 |
inletPowerPhase2b2The phase2b2 active power of inlet.ro INTEGER UNITS "0.1W" .1.3.6.1.4.1.42610.1.4.4.1.6.1.2.1.28 |
inletPowerPhase3b2The phase3b2 active power of inlet.ro INTEGER UNITS "0.1W" .1.3.6.1.4.1.42610.1.4.4.1.6.1.2.1.29 |
inletPowerPhase1The phase1 active power of inlet.ro INTEGER UNITS "0.1W" .1.3.6.1.4.1.42610.1.4.4.1.6.1.2.1.30 |
inletPowerPhase2The phase2 active power of inlet.ro INTEGER UNITS "0.1W" .1.3.6.1.4.1.42610.1.4.4.1.6.1.2.1.31 |
inletPowerPhase3The phase3 active power of inlet.ro INTEGER UNITS "0.1W" .1.3.6.1.4.1.42610.1.4.4.1.6.1.2.1.32 |
inletStatusPhase1The phase1 status of inlet.ro Enumeration .1.3.6.1.4.1.42610.1.4.4.1.6.1.2.1.33 |
inletStatusPhase2The phase2 status of inlet.ro Enumeration .1.3.6.1.4.1.42610.1.4.4.1.6.1.2.1.34 |
inletStatusPhase3The phase3 status of inlet.ro Enumeration .1.3.6.1.4.1.42610.1.4.4.1.6.1.2.1.35 |
inletAppPowerPhase1b1The phase1b1 apparent power of inlet.ro INTEGER UNITS "0.1W" .1.3.6.1.4.1.42610.1.4.4.1.6.1.2.1.36 |
inletAppPowerPhase2b1The phase2b1 apparent power of inlet.ro INTEGER UNITS "0.1W" .1.3.6.1.4.1.42610.1.4.4.1.6.1.2.1.37 |
inletAppPowerPhase3b1The phase3b1 apparent power of inlet.ro INTEGER UNITS "0.1W" .1.3.6.1.4.1.42610.1.4.4.1.6.1.2.1.38 |
inletAppPowerPhase1b2The phase1b2 apparent power of inlet.ro INTEGER UNITS "0.1W" .1.3.6.1.4.1.42610.1.4.4.1.6.1.2.1.39 |
inletAppPowerPhase2b2The phase2b2 apparent power of inlet.ro INTEGER UNITS "0.1W" .1.3.6.1.4.1.42610.1.4.4.1.6.1.2.1.40 |
inletAppPowerPhase3b2The phase3b2 apparent power of inlet.ro INTEGER UNITS "0.1W" .1.3.6.1.4.1.42610.1.4.4.1.6.1.2.1.41 |
inletAppPowerPhase1The phase1 apparent power of inlet.ro INTEGER UNITS "0.1W" .1.3.6.1.4.1.42610.1.4.4.1.6.1.2.1.42 |
inletAppPowerPhase2The phase2 apparent power of inlet.ro INTEGER UNITS "0.1W" .1.3.6.1.4.1.42610.1.4.4.1.6.1.2.1.43 |
inletAppPowerPhase3The phase3 apparent power of inlet.ro INTEGER UNITS "0.1W" .1.3.6.1.4.1.42610.1.4.4.1.6.1.2.1.44 |
inletAppRcmCurrentThe RCM leackage current of inlet.ro INTEGER UNITS "0.1mA" .1.3.6.1.4.1.42610.1.4.4.1.6.1.2.1.45 |
inletLoadBalanceThe load balance of inlet.ro INTEGER UNITS "1%" .1.3.6.1.4.1.42610.1.4.4.1.6.1.2.1.46 |
inletLoadBalanceStatusThe load balance of status inlet.ro Enumeration .1.3.6.1.4.1.42610.1.4.4.1.6.1.2.1.47 |
inletResetFromPhase1The reset phase1 date of inlet.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.42610.1.4.4.1.6.1.2.1.48 |
inletEnergyPhase1The phase1 energy of inlet.ro INTEGER UNITS "KWh" .1.3.6.1.4.1.42610.1.4.4.1.6.1.2.1.49 |
inletResetFromPhase2The reset phase2 date of inlet.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.42610.1.4.4.1.6.1.2.1.50 |
inletEnergyPhase2The phase2 energy of inlet.ro INTEGER UNITS "KWh" .1.3.6.1.4.1.42610.1.4.4.1.6.1.2.1.51 |
inletResetFromPhase3The reset phase3 date of inlet.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.42610.1.4.4.1.6.1.2.1.52 |
inletEnergyPhase3The phase3 energy of inlet.ro INTEGER UNITS "KWh" .1.3.6.1.4.1.42610.1.4.4.1.6.1.2.1.53 |
pduPwrMonitoringInletCfgTableA list to configure thresholds of inlet. SEQUENCE OF PduPwrMonitoringInletCfgEntry .1.3.6.1.4.1.42610.1.4.4.1.6.1.3 |
pduPwrMonitoringInletCfgEntryA list to configure thresholds of inlet. PduPwrMonitoringInletCfgEntry .1.3.6.1.4.1.42610.1.4.4.1.6.1.3.1 |
inletCfgIndexThe index to inlet configuration entry.ro INTEGER .1.3.6.1.4.1.42610.1.4.4.1.6.1.3.1.1 |
inletCfgLoadCriticalThe Critical Threshold of inlet load.rw INTEGER UNITS "0.1kW" .1.3.6.1.4.1.42610.1.4.4.1.6.1.3.1.2 |
inletCfgLoadWarningThe Warning Threshold of inlet load.rw INTEGER UNITS "0.1kW" .1.3.6.1.4.1.42610.1.4.4.1.6.1.3.1.3 |
inletCfgCurrCritPhase1b1The Critical Threshold of pahse1b1 current of inlet.rw INTEGER UNITS "0.1A" .1.3.6.1.4.1.42610.1.4.4.1.6.1.3.1.4 |
inletCfgCurrCritPhase2b1The Critical Threshold of pahse2b1 current of inlet.rw INTEGER UNITS "0.1A" .1.3.6.1.4.1.42610.1.4.4.1.6.1.3.1.5 |
inletCfgCurrCritPhase3b1The Critical Threshold of pahse3b1 current of inlet.rw INTEGER UNITS "0.1A" .1.3.6.1.4.1.42610.1.4.4.1.6.1.3.1.6 |
inletCfgCurrCritPhase1b2The Critical Threshold of pahse1b2 current of inlet.rw INTEGER UNITS "0.1A" .1.3.6.1.4.1.42610.1.4.4.1.6.1.3.1.7 |
inletCfgCurrCritPhase2b2The Critical Threshold of pahse2b2 current of inlet.rw INTEGER UNITS "0.1A" .1.3.6.1.4.1.42610.1.4.4.1.6.1.3.1.8 |
inletCfgCurrCritPhase3b2The Critical Threshold of pahse3b2 current of inlet.rw INTEGER UNITS "0.1A" .1.3.6.1.4.1.42610.1.4.4.1.6.1.3.1.9 |
inletCfgCurrWarnPhase1b1The Warning Threshold of pahse1b1 current of inlet.rw INTEGER UNITS "0.1A" .1.3.6.1.4.1.42610.1.4.4.1.6.1.3.1.10 |
inletCfgCurrWarnPhase2b1The Warning Threshold of pahse2b1 current of inlet.rw INTEGER UNITS "0.1A" .1.3.6.1.4.1.42610.1.4.4.1.6.1.3.1.11 |
inletCfgCurrWarnPhase3b1The Warning Threshold of pahse3b1 current of inlet.rw INTEGER UNITS "0.1A" .1.3.6.1.4.1.42610.1.4.4.1.6.1.3.1.12 |
inletCfgCurrWarnPhase1b2The Warning Threshold of pahse1b2 current of inlet.rw INTEGER UNITS "0.1A" .1.3.6.1.4.1.42610.1.4.4.1.6.1.3.1.13 |
inletCfgCurrWarnPhase2b2The Warning Threshold of pahse2b2 current of inlet.rw INTEGER UNITS "0.1A" .1.3.6.1.4.1.42610.1.4.4.1.6.1.3.1.14 |
inletCfgCurrWarnPhase3b2The Warning Threshold of pahse3b2 current of inlet.rw INTEGER UNITS "0.1A" .1.3.6.1.4.1.42610.1.4.4.1.6.1.3.1.15 |
inletCfgVoltCritPhase1The Critical Threshold of pahse1 voltage of inlet.rw INTEGER UNITS "0.1V" .1.3.6.1.4.1.42610.1.4.4.1.6.1.3.1.16 |
inletCfgVoltCritPhase2The Critical Threshold of pahse2 voltage of inlet.rw INTEGER UNITS "0.1V" .1.3.6.1.4.1.42610.1.4.4.1.6.1.3.1.17 |
inletCfgVoltCritPhase3The Critical Threshold of pahse3 voltage of inlet.rw INTEGER UNITS "0.1V" .1.3.6.1.4.1.42610.1.4.4.1.6.1.3.1.18 |
inletCfgVoltWarnPhase1The Warning Threshold of pahse1 voltage of inlet.rw INTEGER UNITS "0.1V" .1.3.6.1.4.1.42610.1.4.4.1.6.1.3.1.19 |
inletCfgVoltWarnPhase2The Warning Threshold of pahse2 voltage of inlet.rw INTEGER UNITS "0.1V" .1.3.6.1.4.1.42610.1.4.4.1.6.1.3.1.20 |
inletCfgVoltWarnPhase3The Warning Threshold of pahse3 voltage of inlet.rw INTEGER UNITS "0.1V" .1.3.6.1.4.1.42610.1.4.4.1.6.1.3.1.21 |
inletCfgTotalCurrCritPhase1The Critical Threshold of pahse1 total current of inlet.rw INTEGER UNITS "0.1A" .1.3.6.1.4.1.42610.1.4.4.1.6.1.3.1.22 |
inletCfgTotalCurrCritPhase2The Critical Threshold of pahse2 total current of inlet.rw INTEGER UNITS "0.1A" .1.3.6.1.4.1.42610.1.4.4.1.6.1.3.1.23 |
inletCfgTotalCurrCritPhase3The Critical Threshold of pahse3 total current of inlet.rw INTEGER UNITS "0.1A" .1.3.6.1.4.1.42610.1.4.4.1.6.1.3.1.24 |
inletCfgTotalCurrWarnPhase1The Warning Threshold of pahse1 total current of inlet.rw INTEGER UNITS "0.1A" .1.3.6.1.4.1.42610.1.4.4.1.6.1.3.1.25 |
inletCfgTotalCurrWarnPhase2The Warning Threshold of pahse2 total current of inlet.rw INTEGER UNITS "0.1A" .1.3.6.1.4.1.42610.1.4.4.1.6.1.3.1.26 |
inletCfgTotalCurrWarnPhase3The Warning Threshold of pahse3 total current of inlet.rw INTEGER UNITS "0.1A" .1.3.6.1.4.1.42610.1.4.4.1.6.1.3.1.27 |
inletCfgRcmCurrThresholdThe RCM Alarm threshold of inlet.rw INTEGER UNITS "1mA" .1.3.6.1.4.1.42610.1.4.4.1.6.1.3.1.28 |
inletCfgLoadBalanceCritThe Critical Threshold of load balance of inlet.rw INTEGER UNITS "1%" .1.3.6.1.4.1.42610.1.4.4.1.6.1.3.1.29 |
inletCfgLoadBalanceWarnThe Warning Threshold of load balance of inlet.rw INTEGER UNITS "1%" .1.3.6.1.4.1.42610.1.4.4.1.6.1.3.1.30 |
pduPwrMonitoringOutlet OBJECT IDENTIFIER .1.3.6.1.4.1.42610.1.4.4.1.6.2 |
pduPwrMonitoringOutletPduA OBJECT IDENTIFIER .1.3.6.1.4.1.42610.1.4.4.1.6.2.1 |
pduPwrMonitoringOutletNumPduAThe number of PduA Outlet.ro INTEGER .1.3.6.1.4.1.42610.1.4.4.1.6.2.1.1 |
pduPwrMonitoringOutletStatusTablePduAA list to display status of PduA outlet. SEQUENCE OF PduPwrMonitoringOutletStatusPduAEntry .1.3.6.1.4.1.42610.1.4.4.1.6.2.1.2 |
pduPwrMonitoringOutletStatusPduAEntryA list to display status of PduA outlet. PduPwrMonitoringOutletStatusPduAEntry .1.3.6.1.4.1.42610.1.4.4.1.6.2.1.2.1 |
outletPduAIndexThe index to outlet status of PduA.ro INTEGER .1.3.6.1.4.1.42610.1.4.4.1.6.2.1.2.1.1 |
outletPduAStateThe state of PduA outlet.ro Enumeration .1.3.6.1.4.1.42610.1.4.4.1.6.2.1.2.1.2 |
outletPduACurrentThe current of PduA outlet.ro INTEGER UNITS "0.01A" .1.3.6.1.4.1.42610.1.4.4.1.6.2.1.2.1.3 |
outletPduAPwrFactorThe power factor of PduA outlet.ro INTEGER UNITS "0.1%" .1.3.6.1.4.1.42610.1.4.4.1.6.2.1.2.1.4 |
outletPduAPowerThe active power of PduA outlet.ro INTEGER UNITS "0.1W" .1.3.6.1.4.1.42610.1.4.4.1.6.2.1.2.1.5 |
outletPduAEnergyThe energy of PduA outlet.ro INTEGER UNITS "KWh" .1.3.6.1.4.1.42610.1.4.4.1.6.2.1.2.1.6 |
outletPduAResetFromThe reset date of PduA outlet.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.42610.1.4.4.1.6.2.1.2.1.7 |
outletPduAStatusThe status of PduA outlet.ro Enumeration .1.3.6.1.4.1.42610.1.4.4.1.6.2.1.2.1.8 |
outletPduAAppPowerThe apparent power of PduA outlet.ro INTEGER UNITS "0.1W" .1.3.6.1.4.1.42610.1.4.4.1.6.2.1.2.1.9 |
outletPduAVoltageThe voltage of PduA outlet.ro INTEGER UNITS "0.1V" .1.3.6.1.4.1.42610.1.4.4.1.6.2.1.2.1.10 |
pduPwrMonitoringOutletCfgTablePduAA list to display configuration of PduA outlet. SEQUENCE OF PduPwrMonitoringOutletCfgPduAEntry .1.3.6.1.4.1.42610.1.4.4.1.6.2.1.3 |
pduPwrMonitoringOutletCfgPduAEntryA list to display configuration of PduA outlet. PduPwrMonitoringOutletCfgPduAEntry .1.3.6.1.4.1.42610.1.4.4.1.6.2.1.3.1 |
outletCfgPduAIndexThe index to outlet configuration of PduA.ro INTEGER .1.3.6.1.4.1.42610.1.4.4.1.6.2.1.3.1.1 |
outletCfgPduANameThe name for outlet of PduA.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.42610.1.4.4.1.6.2.1.3.1.2 |
outletCfgPduADelayOnStatusThe Delay On status of PduA outlet.rw Enumeration .1.3.6.1.4.1.42610.1.4.4.1.6.2.1.3.1.3 |
outletCfgPduADelayOnTimeThe Delay On time of PduA outlet.rw INTEGER UNITS "seconds" .1.3.6.1.4.1.42610.1.4.4.1.6.2.1.3.1.4 |
outletCfgPduADelayOffStatusThe Delay Off status of PduA outlet.rw Enumeration .1.3.6.1.4.1.42610.1.4.4.1.6.2.1.3.1.5 |
outletCfgPduADelayOffTimeThe Delay Off time of PduA outlet.rw INTEGER UNITS "seconds" .1.3.6.1.4.1.42610.1.4.4.1.6.2.1.3.1.6 |
outletCfgPduARebootThe Delay On reboot duration of PduA outlet.rw INTEGER UNITS "seconds" .1.3.6.1.4.1.42610.1.4.4.1.6.2.1.3.1.7 |
outletCfgPduAOverCurrCriticalThe Critical Threshold of current of PduA outlet.rw INTEGER UNITS "0.1A" .1.3.6.1.4.1.42610.1.4.4.1.6.2.1.3.1.8 |
outletCfgPduAOverCurrWarningThe Warning Threshold of current of PduA outlet.rw INTEGER UNITS "0.1A" .1.3.6.1.4.1.42610.1.4.4.1.6.2.1.3.1.9 |
outletCfgPduAOverPwrCriticalThe Critical Threshold of power of PduA outlet.rw INTEGER UNITS "1W" .1.3.6.1.4.1.42610.1.4.4.1.6.2.1.3.1.10 |
outletCfgPduAOverPwrWarningThe Warning Threshold of power of PduA outlet.rw INTEGER UNITS "1W" .1.3.6.1.4.1.42610.1.4.4.1.6.2.1.3.1.11 |
pduPwrMonitoringOutletCtlTablePduAA list to display control of PduA outlet. SEQUENCE OF PduPwrMonitoringOutletCtlPduAEntry .1.3.6.1.4.1.42610.1.4.4.1.6.2.1.4 |
pduPwrMonitoringOutletCtlPduAEntryA list to display control of PduA outlet. PduPwrMonitoringOutletCtlPduAEntry .1.3.6.1.4.1.42610.1.4.4.1.6.2.1.4.1 |
outletCtlPduAIndexThe index to outlet control of PduA.ro INTEGER .1.3.6.1.4.1.42610.1.4.4.1.6.2.1.4.1.1 |
outletCtlPduAControlThe control-type of PduA outlet.rw Enumeration .1.3.6.1.4.1.42610.1.4.4.1.6.2.1.4.1.2 |
pduPwrMonitoringOutletPduB OBJECT IDENTIFIER .1.3.6.1.4.1.42610.1.4.4.1.6.2.2 |
pduPwrMonitoringOutletNumPduBThe number of PduB Outlet.ro INTEGER .1.3.6.1.4.1.42610.1.4.4.1.6.2.2.1 |
pduPwrMonitoringOutletStatusTablePduBA list to display status of PduB outlet. SEQUENCE OF PduPwrMonitoringOutletStatusPduBEntry .1.3.6.1.4.1.42610.1.4.4.1.6.2.2.2 |
pduPwrMonitoringOutletStatusPduBEntryA list to display status of PduB outlet. PduPwrMonitoringOutletStatusPduBEntry .1.3.6.1.4.1.42610.1.4.4.1.6.2.2.2.1 |
outletPduBIndexThe index to outlet status of PduB.ro INTEGER .1.3.6.1.4.1.42610.1.4.4.1.6.2.2.2.1.1 |
outletPduBStateThe state of PduB outlet.ro Enumeration .1.3.6.1.4.1.42610.1.4.4.1.6.2.2.2.1.2 |
outletPduBCurrentThe current of PduB outlet.ro INTEGER UNITS "0.01A" .1.3.6.1.4.1.42610.1.4.4.1.6.2.2.2.1.3 |
outletPduBPwrFactorThe power factor of PduB outlet.ro INTEGER UNITS "0.1%" .1.3.6.1.4.1.42610.1.4.4.1.6.2.2.2.1.4 |
outletPduBPowerThe active power of PduB outlet.ro INTEGER UNITS "0.1W" .1.3.6.1.4.1.42610.1.4.4.1.6.2.2.2.1.5 |
outletPduBEnergyThe energy of PduB outlet.ro INTEGER UNITS "KWh" .1.3.6.1.4.1.42610.1.4.4.1.6.2.2.2.1.6 |
outletPduBResetFromThe reset date of PduB outlet.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.42610.1.4.4.1.6.2.2.2.1.7 |
outletPduBStatusThe status of PduB outlet.ro Enumeration .1.3.6.1.4.1.42610.1.4.4.1.6.2.2.2.1.8 |
outletPduBAppPowerThe apparent power of PduB outlet.ro INTEGER UNITS "0.1W" .1.3.6.1.4.1.42610.1.4.4.1.6.2.2.2.1.9 |
outletPduBVoltageThe voltage of PduB outlet.ro INTEGER UNITS "0.1V" .1.3.6.1.4.1.42610.1.4.4.1.6.2.2.2.1.10 |
pduPwrMonitoringOutletCfgTablePduBA list to display configuration of PduB outlet. SEQUENCE OF PduPwrMonitoringOutletCfgPduBEntry .1.3.6.1.4.1.42610.1.4.4.1.6.2.2.3 |
pduPwrMonitoringOutletCfgPduBEntryA list to display configuration of PduB outlet. PduPwrMonitoringOutletCfgPduBEntry .1.3.6.1.4.1.42610.1.4.4.1.6.2.2.3.1 |
outletCfgPduBIndexThe index to outlet configuration of PduB.ro INTEGER .1.3.6.1.4.1.42610.1.4.4.1.6.2.2.3.1.1 |
outletCfgPduBNameThe name for outlet of PduB.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.42610.1.4.4.1.6.2.2.3.1.2 |
outletCfgPduBDelayOnStatusThe Delay On status of PduB outlet.rw Enumeration .1.3.6.1.4.1.42610.1.4.4.1.6.2.2.3.1.3 |
outletCfgPduBDelayOnTimeThe Delay On time of PduB outlet.rw INTEGER UNITS "seconds" .1.3.6.1.4.1.42610.1.4.4.1.6.2.2.3.1.4 |
outletCfgPduBDelayOffStatusThe Delay Off status of PduB outlet.rw Enumeration .1.3.6.1.4.1.42610.1.4.4.1.6.2.2.3.1.5 |
outletCfgPduBDelayOffTimeThe Delay Off time of PduB outlet.rw INTEGER UNITS "seconds" .1.3.6.1.4.1.42610.1.4.4.1.6.2.2.3.1.6 |
outletCfgPduBRebootThe Delay On reboot duration of PduB outlet.rw INTEGER UNITS "seconds" .1.3.6.1.4.1.42610.1.4.4.1.6.2.2.3.1.7 |
outletCfgPduBOverCurrCriticalThe Critical Threshold of current of PduB outlet.rw INTEGER UNITS "0.1A" .1.3.6.1.4.1.42610.1.4.4.1.6.2.2.3.1.8 |
outletCfgPduBOverCurrWarningThe Warning Threshold of current of PduB outlet.rw INTEGER UNITS "0.1A" .1.3.6.1.4.1.42610.1.4.4.1.6.2.2.3.1.9 |
outletCfgPduBOverPwrCriticalThe Critical Threshold of power of PduB outlet.rw INTEGER UNITS "1W" .1.3.6.1.4.1.42610.1.4.4.1.6.2.2.3.1.10 |
outletCfgPduBOverPwrWarningThe Warning Threshold of power of PduB outlet.rw INTEGER UNITS "1W" .1.3.6.1.4.1.42610.1.4.4.1.6.2.2.3.1.11 |
pduPwrMonitoringOutletCtlTablePduBA list to display control of PduB outlet. SEQUENCE OF PduPwrMonitoringOutletCtlPduBEntry .1.3.6.1.4.1.42610.1.4.4.1.6.2.2.4 |
pduPwrMonitoringOutletCtlPduBEntryA list to display control of PduB outlet. PduPwrMonitoringOutletCtlPduBEntry .1.3.6.1.4.1.42610.1.4.4.1.6.2.2.4.1 |
outletCtlPduBIndexThe index to outlet control of PduB.ro INTEGER .1.3.6.1.4.1.42610.1.4.4.1.6.2.2.4.1.1 |
outletCtlPduBControlThe control-type of PduB outlet.rw Enumeration .1.3.6.1.4.1.42610.1.4.4.1.6.2.2.4.1.2 |
pduPwrMonitoringOutletPduC OBJECT IDENTIFIER .1.3.6.1.4.1.42610.1.4.4.1.6.2.3 |
pduPwrMonitoringOutletNumPduCThe number of PduC Outlet.ro INTEGER .1.3.6.1.4.1.42610.1.4.4.1.6.2.3.1 |
pduPwrMonitoringOutletStatusTablePduCA list to display status of PduC outlet. SEQUENCE OF PduPwrMonitoringOutletStatusPduCEntry .1.3.6.1.4.1.42610.1.4.4.1.6.2.3.2 |
pduPwrMonitoringOutletStatusPduCEntryA list to display status of PduC outlet. PduPwrMonitoringOutletStatusPduCEntry .1.3.6.1.4.1.42610.1.4.4.1.6.2.3.2.1 |
outletPduCIndexThe index to outlet status of PduC.ro INTEGER .1.3.6.1.4.1.42610.1.4.4.1.6.2.3.2.1.1 |
outletPduCStateThe state of PduC outlet.ro Enumeration .1.3.6.1.4.1.42610.1.4.4.1.6.2.3.2.1.2 |
outletPduCCurrentThe current of PduC outlet.ro INTEGER UNITS "0.01A" .1.3.6.1.4.1.42610.1.4.4.1.6.2.3.2.1.3 |
outletPduCPwrFactorThe power factor of PduC outlet.ro INTEGER UNITS "0.1%" .1.3.6.1.4.1.42610.1.4.4.1.6.2.3.2.1.4 |
outletPduCPowerThe active power of PduC outlet.ro INTEGER UNITS "0.1W" .1.3.6.1.4.1.42610.1.4.4.1.6.2.3.2.1.5 |
outletPduCEnergyThe energy of PduC outlet.ro INTEGER UNITS "KWh" .1.3.6.1.4.1.42610.1.4.4.1.6.2.3.2.1.6 |
outletPduCResetFromThe reset date of PduC outlet.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.42610.1.4.4.1.6.2.3.2.1.7 |
outletPduCStatusThe status of PduC outlet.ro Enumeration .1.3.6.1.4.1.42610.1.4.4.1.6.2.3.2.1.8 |
outletPduCAppPowerThe apparent power of PduC outlet.ro INTEGER UNITS "0.1W" .1.3.6.1.4.1.42610.1.4.4.1.6.2.3.2.1.9 |
outletPduCVoltageThe voltage of PduC outlet.ro INTEGER UNITS "0.1V" .1.3.6.1.4.1.42610.1.4.4.1.6.2.3.2.1.10 |
pduPwrMonitoringOutletCfgTablePduCA list to display configuration of PduC outlet. SEQUENCE OF PduPwrMonitoringOutletCfgPduCEntry .1.3.6.1.4.1.42610.1.4.4.1.6.2.3.3 |
pduPwrMonitoringOutletCfgPduCEntryA list to display configuration of PduC outlet. PduPwrMonitoringOutletCfgPduCEntry .1.3.6.1.4.1.42610.1.4.4.1.6.2.3.3.1 |
outletCfgPduCIndexThe index to outlet configuration of PduC.ro INTEGER .1.3.6.1.4.1.42610.1.4.4.1.6.2.3.3.1.1 |
outletCfgPduCNameThe name for outlet of PduC.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.42610.1.4.4.1.6.2.3.3.1.2 |
outletCfgPduCDelayOnStatusThe Delay On status of PduC outlet.rw Enumeration .1.3.6.1.4.1.42610.1.4.4.1.6.2.3.3.1.3 |
outletCfgPduCDelayOnTimeThe Delay On time of PduC outlet.rw INTEGER UNITS "seconds" .1.3.6.1.4.1.42610.1.4.4.1.6.2.3.3.1.4 |
outletCfgPduCDelayOffStatusThe Delay Off status of PduC outlet.rw Enumeration .1.3.6.1.4.1.42610.1.4.4.1.6.2.3.3.1.5 |
outletCfgPduCDelayOffTimeThe Delay Off time of PduC outlet.rw INTEGER UNITS "seconds" .1.3.6.1.4.1.42610.1.4.4.1.6.2.3.3.1.6 |
outletCfgPduCRebootThe Delay On reboot duration of PduC outlet.rw INTEGER UNITS "seconds" .1.3.6.1.4.1.42610.1.4.4.1.6.2.3.3.1.7 |
outletCfgPduCOverCurrCriticalThe Critical Threshold of current of PduC outlet.rw INTEGER UNITS "0.1A" .1.3.6.1.4.1.42610.1.4.4.1.6.2.3.3.1.8 |
outletCfgPduCOverCurrWarningThe Warning Threshold of current of PduC outlet.rw INTEGER UNITS "0.1A" .1.3.6.1.4.1.42610.1.4.4.1.6.2.3.3.1.9 |
outletCfgPduCOverPwrCriticalThe Critical Threshold of power of PduC outlet.rw INTEGER UNITS "1W" .1.3.6.1.4.1.42610.1.4.4.1.6.2.3.3.1.10 |
outletCfgPduCOverPwrWarningThe Warning Threshold of power of PduC outlet.rw INTEGER UNITS "1W" .1.3.6.1.4.1.42610.1.4.4.1.6.2.3.3.1.11 |
pduPwrMonitoringOutletCtlTablePduCA list to display control of PduC outlet. SEQUENCE OF PduPwrMonitoringOutletCtlPduCEntry .1.3.6.1.4.1.42610.1.4.4.1.6.2.3.4 |
pduPwrMonitoringOutletCtlPduCEntryA list to display control of PduC outlet. PduPwrMonitoringOutletCtlPduCEntry .1.3.6.1.4.1.42610.1.4.4.1.6.2.3.4.1 |
outletCtlPduCIndexThe index to outlet control of PduC.ro INTEGER .1.3.6.1.4.1.42610.1.4.4.1.6.2.3.4.1.1 |
outletCtlPduCControlThe control-type of PduC outlet.rw Enumeration .1.3.6.1.4.1.42610.1.4.4.1.6.2.3.4.1.2 |
pduPwrMonitoringOutletPduD OBJECT IDENTIFIER .1.3.6.1.4.1.42610.1.4.4.1.6.2.4 |
pduPwrMonitoringOutletNumPduDThe number of PduD Outlet.ro INTEGER .1.3.6.1.4.1.42610.1.4.4.1.6.2.4.1 |
pduPwrMonitoringOutletStatusTablePduDA list to display status of PduD outlet. SEQUENCE OF PduPwrMonitoringOutletStatusPduDEntry .1.3.6.1.4.1.42610.1.4.4.1.6.2.4.2 |
pduPwrMonitoringOutletStatusPduDEntryA list to display status of PduD outlet. PduPwrMonitoringOutletStatusPduDEntry .1.3.6.1.4.1.42610.1.4.4.1.6.2.4.2.1 |
outletPduDIndexThe index to outlet status of PduD.ro INTEGER .1.3.6.1.4.1.42610.1.4.4.1.6.2.4.2.1.1 |
outletPduDStateThe state of PduD outlet.ro Enumeration .1.3.6.1.4.1.42610.1.4.4.1.6.2.4.2.1.2 |
outletPduDCurrentThe current of PduD outlet.ro INTEGER UNITS "0.01A" .1.3.6.1.4.1.42610.1.4.4.1.6.2.4.2.1.3 |
outletPduDPwrFactorThe power factor of PduD outlet.ro INTEGER UNITS "0.1%" .1.3.6.1.4.1.42610.1.4.4.1.6.2.4.2.1.4 |
outletPduDPowerThe active power of PduD outlet.ro INTEGER UNITS "0.1W" .1.3.6.1.4.1.42610.1.4.4.1.6.2.4.2.1.5 |
outletPduDEnergyThe energy of PduD outlet.ro INTEGER UNITS "KWh" .1.3.6.1.4.1.42610.1.4.4.1.6.2.4.2.1.6 |
outletPduDResetFromThe reset date of PduD outlet.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.42610.1.4.4.1.6.2.4.2.1.7 |
outletPduDStatusThe status of PduD outlet.ro Enumeration .1.3.6.1.4.1.42610.1.4.4.1.6.2.4.2.1.8 |
outletPduDAppPowerThe apparent power of PduD outlet.ro INTEGER UNITS "0.1W" .1.3.6.1.4.1.42610.1.4.4.1.6.2.4.2.1.9 |
outletPduDVoltageThe voltage of PduD outlet.ro INTEGER UNITS "0.1V" .1.3.6.1.4.1.42610.1.4.4.1.6.2.4.2.1.10 |
pduPwrMonitoringOutletCfgTablePduDA list to display configuration of PduD outlet. SEQUENCE OF PduPwrMonitoringOutletCfgPduDEntry .1.3.6.1.4.1.42610.1.4.4.1.6.2.4.3 |
pduPwrMonitoringOutletCfgPduDEntryA list to display configuration of PduD outlet. PduPwrMonitoringOutletCfgPduDEntry .1.3.6.1.4.1.42610.1.4.4.1.6.2.4.3.1 |
outletCfgPduDIndexThe index to outlet configuration of PduD.ro INTEGER .1.3.6.1.4.1.42610.1.4.4.1.6.2.4.3.1.1 |
outletCfgPduDNameThe name for outlet of PduD.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.42610.1.4.4.1.6.2.4.3.1.2 |
outletCfgPduDDelayOnStatusThe Delay On status of PduD outlet.rw Enumeration .1.3.6.1.4.1.42610.1.4.4.1.6.2.4.3.1.3 |
outletCfgPduDDelayOnTimeThe Delay On time of PduD outlet.rw INTEGER UNITS "seconds" .1.3.6.1.4.1.42610.1.4.4.1.6.2.4.3.1.4 |
outletCfgPduDDelayOffStatusThe Delay Off status of PduD outlet.rw Enumeration .1.3.6.1.4.1.42610.1.4.4.1.6.2.4.3.1.5 |
outletCfgPduDDelayOffTimeThe Delay Off time of PduD outlet.rw INTEGER UNITS "seconds" .1.3.6.1.4.1.42610.1.4.4.1.6.2.4.3.1.6 |
outletCfgPduDRebootThe Delay On reboot duration of PduD outlet.rw INTEGER UNITS "seconds" .1.3.6.1.4.1.42610.1.4.4.1.6.2.4.3.1.7 |
outletCfgPduDOverCurrCriticalThe Critical Threshold of current of PduD outlet.rw INTEGER UNITS "0.1A" .1.3.6.1.4.1.42610.1.4.4.1.6.2.4.3.1.8 |
outletCfgPduDOverCurrWarningThe Warning Threshold of current of PduD outlet.rw INTEGER UNITS "0.1A" .1.3.6.1.4.1.42610.1.4.4.1.6.2.4.3.1.9 |
outletCfgPduDOverPwrCriticalThe Critical Threshold of power of PduD outlet.rw INTEGER UNITS "1W" .1.3.6.1.4.1.42610.1.4.4.1.6.2.4.3.1.10 |
outletCfgPduDOverPwrWarningThe Warning Threshold of power of PduD outlet.rw INTEGER UNITS "1W" .1.3.6.1.4.1.42610.1.4.4.1.6.2.4.3.1.11 |
pduPwrMonitoringOutletCtlTablePduDA list to display control of PduD outlet. SEQUENCE OF PduPwrMonitoringOutletCtlPduDEntry .1.3.6.1.4.1.42610.1.4.4.1.6.2.4.4 |
pduPwrMonitoringOutletCtlPduDEntryA list to display control of PduD outlet. PduPwrMonitoringOutletCtlPduDEntry .1.3.6.1.4.1.42610.1.4.4.1.6.2.4.4.1 |
outletCtlPduDIndexThe index to outlet control of PduD.ro INTEGER .1.3.6.1.4.1.42610.1.4.4.1.6.2.4.4.1.1 |
outletCtlPduDControlThe control-type of PduD outlet.rw Enumeration .1.3.6.1.4.1.42610.1.4.4.1.6.2.4.4.1.2 |
pduPwrMonitoringOutletPduE OBJECT IDENTIFIER .1.3.6.1.4.1.42610.1.4.4.1.6.2.5 |
pduPwrMonitoringOutletNumPduEThe number of PduE Outlet.ro INTEGER .1.3.6.1.4.1.42610.1.4.4.1.6.2.5.1 |
pduPwrMonitoringOutletStatusTablePduEA list to display status of PduE outlet. SEQUENCE OF PduPwrMonitoringOutletStatusPduEEntry .1.3.6.1.4.1.42610.1.4.4.1.6.2.5.2 |
pduPwrMonitoringOutletStatusPduEEntryA list to display status of PduE outlet. PduPwrMonitoringOutletStatusPduEEntry .1.3.6.1.4.1.42610.1.4.4.1.6.2.5.2.1 |
outletPduEIndexThe index to outlet status of PduE.ro INTEGER .1.3.6.1.4.1.42610.1.4.4.1.6.2.5.2.1.1 |
outletPduEStateThe state of PduE outlet.ro Enumeration .1.3.6.1.4.1.42610.1.4.4.1.6.2.5.2.1.2 |
outletPduECurrentThe current of PduE outlet.ro INTEGER UNITS "0.01A" .1.3.6.1.4.1.42610.1.4.4.1.6.2.5.2.1.3 |
outletPduEPwrFactorThe power factor of PduE outlet.ro INTEGER UNITS "0.1%" .1.3.6.1.4.1.42610.1.4.4.1.6.2.5.2.1.4 |
outletPduEPowerThe active power of PduE outlet.ro INTEGER UNITS "0.1W" .1.3.6.1.4.1.42610.1.4.4.1.6.2.5.2.1.5 |
outletPduEEnergyThe energy of PduE outlet.ro INTEGER UNITS "KWh" .1.3.6.1.4.1.42610.1.4.4.1.6.2.5.2.1.6 |
outletPduEResetFromThe reset date of PduE outlet.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.42610.1.4.4.1.6.2.5.2.1.7 |
outletPduEStatusThe status of PduE outlet.ro Enumeration .1.3.6.1.4.1.42610.1.4.4.1.6.2.5.2.1.8 |
outletPduEAppPowerThe apparent power of PduE outlet.ro INTEGER UNITS "0.1W" .1.3.6.1.4.1.42610.1.4.4.1.6.2.5.2.1.9 |
outletPduEVoltageThe voltage of PduE outlet.ro INTEGER UNITS "0.1V" .1.3.6.1.4.1.42610.1.4.4.1.6.2.5.2.1.10 |
pduPwrMonitoringOutletCfgTablePduEA list to display configuration of PduE outlet. SEQUENCE OF PduPwrMonitoringOutletCfgPduEEntry .1.3.6.1.4.1.42610.1.4.4.1.6.2.5.3 |
pduPwrMonitoringOutletCfgPduEEntryA list to display configuration of PduE outlet. PduPwrMonitoringOutletCfgPduEEntry .1.3.6.1.4.1.42610.1.4.4.1.6.2.5.3.1 |
outletCfgPduEIndexThe index to outlet configuration of PduE.ro INTEGER .1.3.6.1.4.1.42610.1.4.4.1.6.2.5.3.1.1 |
outletCfgPduENameThe name for outlet of PduE.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.42610.1.4.4.1.6.2.5.3.1.2 |
outletCfgPduEDelayOnStatusThe Delay On status of PduE outlet.rw Enumeration .1.3.6.1.4.1.42610.1.4.4.1.6.2.5.3.1.3 |
outletCfgPduEDelayOnTimeThe Delay On time of PduE outlet.rw INTEGER UNITS "seconds" .1.3.6.1.4.1.42610.1.4.4.1.6.2.5.3.1.4 |
outletCfgPduEDelayOffStatusThe Delay Off status of PduE outlet.rw Enumeration .1.3.6.1.4.1.42610.1.4.4.1.6.2.5.3.1.5 |
outletCfgPduEDelayOffTimeThe Delay Off time of PduE outlet.rw INTEGER UNITS "seconds" .1.3.6.1.4.1.42610.1.4.4.1.6.2.5.3.1.6 |
outletCfgPduERebootThe Delay On reboot duration of PduE outlet.rw INTEGER UNITS "seconds" .1.3.6.1.4.1.42610.1.4.4.1.6.2.5.3.1.7 |
outletCfgPduEOverCurrCriticalThe Critical Threshold of current of PduE outlet.rw INTEGER UNITS "0.1A" .1.3.6.1.4.1.42610.1.4.4.1.6.2.5.3.1.8 |
outletCfgPduEOverCurrWarningThe Warning Threshold of current of PduE outlet.rw INTEGER UNITS "0.1A" .1.3.6.1.4.1.42610.1.4.4.1.6.2.5.3.1.9 |
outletCfgPduEOverPwrCriticalThe Critical Threshold of power of PduE outlet.rw INTEGER UNITS "1W" .1.3.6.1.4.1.42610.1.4.4.1.6.2.5.3.1.10 |
outletCfgPduEOverPwrWarningThe Warning Threshold of power of PduE outlet.rw INTEGER UNITS "1W" .1.3.6.1.4.1.42610.1.4.4.1.6.2.5.3.1.11 |
pduPwrMonitoringOutletCtlTablePduEA list to display control of PduE outlet. SEQUENCE OF PduPwrMonitoringOutletCtlPduEEntry .1.3.6.1.4.1.42610.1.4.4.1.6.2.5.4 |
pduPwrMonitoringOutletCtlPduEEntryA list to display control of PduE outlet. PduPwrMonitoringOutletCtlPduEEntry .1.3.6.1.4.1.42610.1.4.4.1.6.2.5.4.1 |
outletCtlPduEIndexThe index to outlet control of PduE.ro INTEGER .1.3.6.1.4.1.42610.1.4.4.1.6.2.5.4.1.1 |
outletCtlPduEControlThe control-type of PduE outlet.rw Enumeration .1.3.6.1.4.1.42610.1.4.4.1.6.2.5.4.1.2 |
pduPwrMonitoringOutletPduF OBJECT IDENTIFIER .1.3.6.1.4.1.42610.1.4.4.1.6.2.6 |
pduPwrMonitoringOutletNumPduFThe number of PduF Outlet.ro INTEGER .1.3.6.1.4.1.42610.1.4.4.1.6.2.6.1 |
pduPwrMonitoringOutletStatusTablePduFA list to display status of PduF outlet. SEQUENCE OF PduPwrMonitoringOutletStatusPduFEntry .1.3.6.1.4.1.42610.1.4.4.1.6.2.6.2 |
pduPwrMonitoringOutletStatusPduFEntryA list to display status of PduF outlet. PduPwrMonitoringOutletStatusPduFEntry .1.3.6.1.4.1.42610.1.4.4.1.6.2.6.2.1 |
outletPduFIndexThe index to outlet status of PduF.ro INTEGER .1.3.6.1.4.1.42610.1.4.4.1.6.2.6.2.1.1 |
outletPduFStateThe state of PduF outlet.ro Enumeration .1.3.6.1.4.1.42610.1.4.4.1.6.2.6.2.1.2 |
outletPduFCurrentThe current of PduF outlet.ro INTEGER UNITS "0.01A" .1.3.6.1.4.1.42610.1.4.4.1.6.2.6.2.1.3 |
outletPduFPwrFactorThe power factor of PduF outlet.ro INTEGER UNITS "0.1%" .1.3.6.1.4.1.42610.1.4.4.1.6.2.6.2.1.4 |
outletPduFPowerThe active power of PduF outlet.ro INTEGER UNITS "0.1W" .1.3.6.1.4.1.42610.1.4.4.1.6.2.6.2.1.5 |
outletPduFEnergyThe energy of PduF outlet.ro INTEGER UNITS "KWh" .1.3.6.1.4.1.42610.1.4.4.1.6.2.6.2.1.6 |
outletPduFResetFromThe reset date of PduF outlet.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.42610.1.4.4.1.6.2.6.2.1.7 |
outletPduFStatusThe status of PduF outlet.ro Enumeration .1.3.6.1.4.1.42610.1.4.4.1.6.2.6.2.1.8 |
outletPduFAppPowerThe apparent power of PduF outlet.ro INTEGER UNITS "0.1W" .1.3.6.1.4.1.42610.1.4.4.1.6.2.6.2.1.9 |
outletPduFVoltageThe voltage of PduF outlet.ro INTEGER UNITS "0.1V" .1.3.6.1.4.1.42610.1.4.4.1.6.2.6.2.1.10 |
pduPwrMonitoringOutletCfgTablePduFA list to display configuration of PduF outlet. SEQUENCE OF PduPwrMonitoringOutletCfgPduFEntry .1.3.6.1.4.1.42610.1.4.4.1.6.2.6.3 |
pduPwrMonitoringOutletCfgPduFEntryA list to display configuration of PduF outlet. PduPwrMonitoringOutletCfgPduFEntry .1.3.6.1.4.1.42610.1.4.4.1.6.2.6.3.1 |
outletCfgPduFIndexThe index to outlet configuration of PduF.ro INTEGER .1.3.6.1.4.1.42610.1.4.4.1.6.2.6.3.1.1 |
outletCfgPduFNameThe name for outlet of PduF.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.42610.1.4.4.1.6.2.6.3.1.2 |
outletCfgPduFDelayOnStatusThe Delay On status of PduF outlet.rw Enumeration .1.3.6.1.4.1.42610.1.4.4.1.6.2.6.3.1.3 |
outletCfgPduFDelayOnTimeThe Delay On time of PduF outlet.rw INTEGER UNITS "seconds" .1.3.6.1.4.1.42610.1.4.4.1.6.2.6.3.1.4 |
outletCfgPduFDelayOffStatusThe Delay Off status of PduF outlet.rw Enumeration .1.3.6.1.4.1.42610.1.4.4.1.6.2.6.3.1.5 |
outletCfgPduFDelayOffTimeThe Delay Off time of PduF outlet.rw INTEGER UNITS "seconds" .1.3.6.1.4.1.42610.1.4.4.1.6.2.6.3.1.6 |
outletCfgPduFRebootThe Delay On reboot duration of PduF outlet.rw INTEGER UNITS "seconds" .1.3.6.1.4.1.42610.1.4.4.1.6.2.6.3.1.7 |
outletCfgPduFOverCurrCriticalThe Critical Threshold of current of PduF outlet.rw INTEGER UNITS "0.1A" .1.3.6.1.4.1.42610.1.4.4.1.6.2.6.3.1.8 |
outletCfgPduFOverCurrWarningThe Warning Threshold of current of PduF outlet.rw INTEGER UNITS "0.1A" .1.3.6.1.4.1.42610.1.4.4.1.6.2.6.3.1.9 |
outletCfgPduFOverPwrCriticalThe Critical Threshold of power of PduF outlet.rw INTEGER UNITS "1W" .1.3.6.1.4.1.42610.1.4.4.1.6.2.6.3.1.10 |
outletCfgPduFOverPwrWarningThe Warning Threshold of power of PduF outlet.rw INTEGER UNITS "1W" .1.3.6.1.4.1.42610.1.4.4.1.6.2.6.3.1.11 |
pduPwrMonitoringOutletCtlTablePduFA list to display control of PduF outlet. SEQUENCE OF PduPwrMonitoringOutletCtlPduFEntry .1.3.6.1.4.1.42610.1.4.4.1.6.2.6.4 |
pduPwrMonitoringOutletCtlPduFEntryA list to display control of PduF outlet. PduPwrMonitoringOutletCtlPduFEntry .1.3.6.1.4.1.42610.1.4.4.1.6.2.6.4.1 |
outletCtlPduFIndexThe index to outlet control of PduF.ro INTEGER .1.3.6.1.4.1.42610.1.4.4.1.6.2.6.4.1.1 |
outletCtlPduFControlThe control-type of PduF outlet.rw Enumeration .1.3.6.1.4.1.42610.1.4.4.1.6.2.6.4.1.2 |
pduPwrMonitoringOutletPduG OBJECT IDENTIFIER .1.3.6.1.4.1.42610.1.4.4.1.6.2.7 |
pduPwrMonitoringOutletNumPduGThe number of PduG Outlet.ro INTEGER .1.3.6.1.4.1.42610.1.4.4.1.6.2.7.1 |
pduPwrMonitoringOutletStatusTablePduGA list to display status of PduG outlet. SEQUENCE OF PduPwrMonitoringOutletStatusPduGEntry .1.3.6.1.4.1.42610.1.4.4.1.6.2.7.2 |
pduPwrMonitoringOutletStatusPduGEntryA list to display status of PduG outlet. PduPwrMonitoringOutletStatusPduGEntry .1.3.6.1.4.1.42610.1.4.4.1.6.2.7.2.1 |
outletPduGIndexThe index to outlet status of PduG.ro INTEGER .1.3.6.1.4.1.42610.1.4.4.1.6.2.7.2.1.1 |
outletPduGStateThe state of PduG outlet.ro Enumeration .1.3.6.1.4.1.42610.1.4.4.1.6.2.7.2.1.2 |
outletPduGCurrentThe current of PduG outlet.ro INTEGER UNITS "0.01A" .1.3.6.1.4.1.42610.1.4.4.1.6.2.7.2.1.3 |
outletPduGPwrFactorThe power factor of PduG outlet.ro INTEGER UNITS "0.1%" .1.3.6.1.4.1.42610.1.4.4.1.6.2.7.2.1.4 |
outletPduGPowerThe active power of PduG outlet.ro INTEGER UNITS "0.1W" .1.3.6.1.4.1.42610.1.4.4.1.6.2.7.2.1.5 |
outletPduGEnergyThe energy of PduG outlet.ro INTEGER UNITS "KWh" .1.3.6.1.4.1.42610.1.4.4.1.6.2.7.2.1.6 |
outletPduGResetFromThe reset date of PduG outlet.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.42610.1.4.4.1.6.2.7.2.1.7 |
outletPduGStatusThe status of PduG outlet.ro Enumeration .1.3.6.1.4.1.42610.1.4.4.1.6.2.7.2.1.8 |
outletPduGAppPowerThe apparent power of PduG outlet.ro INTEGER UNITS "0.1W" .1.3.6.1.4.1.42610.1.4.4.1.6.2.7.2.1.9 |
outletPduGVoltageThe voltage of PduG outlet.ro INTEGER UNITS "0.1V" .1.3.6.1.4.1.42610.1.4.4.1.6.2.7.2.1.10 |
pduPwrMonitoringOutletCfgTablePduGA list to display configuration of PduG outlet. SEQUENCE OF PduPwrMonitoringOutletCfgPduGEntry .1.3.6.1.4.1.42610.1.4.4.1.6.2.7.3 |
pduPwrMonitoringOutletCfgPduGEntryA list to display configuration of PduG outlet. PduPwrMonitoringOutletCfgPduGEntry .1.3.6.1.4.1.42610.1.4.4.1.6.2.7.3.1 |
outletCfgPduGIndexThe index to outlet configuration of PduG.ro INTEGER .1.3.6.1.4.1.42610.1.4.4.1.6.2.7.3.1.1 |
outletCfgPduGNameThe name for outlet of PduG.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.42610.1.4.4.1.6.2.7.3.1.2 |
outletCfgPduGDelayOnStatusThe Delay On status of PduG outlet.rw Enumeration .1.3.6.1.4.1.42610.1.4.4.1.6.2.7.3.1.3 |
outletCfgPduGDelayOnTimeThe Delay On time of PduG outlet.rw INTEGER UNITS "seconds" .1.3.6.1.4.1.42610.1.4.4.1.6.2.7.3.1.4 |
outletCfgPduGDelayOffStatusThe Delay Off status of PduG outlet.rw Enumeration .1.3.6.1.4.1.42610.1.4.4.1.6.2.7.3.1.5 |
outletCfgPduGDelayOffTimeThe Delay Off time of PduG outlet.rw INTEGER UNITS "seconds" .1.3.6.1.4.1.42610.1.4.4.1.6.2.7.3.1.6 |
outletCfgPduGRebootThe Delay On reboot duration of PduG outlet.rw INTEGER UNITS "seconds" .1.3.6.1.4.1.42610.1.4.4.1.6.2.7.3.1.7 |
outletCfgPduGOverCurrCriticalThe Critical Threshold of current of PduG outlet.rw INTEGER UNITS "0.1A" .1.3.6.1.4.1.42610.1.4.4.1.6.2.7.3.1.8 |
outletCfgPduGOverCurrWarningThe Warning Threshold of current of PduG outlet.rw INTEGER UNITS "0.1A" .1.3.6.1.4.1.42610.1.4.4.1.6.2.7.3.1.9 |
outletCfgPduGOverPwrCriticalThe Critical Threshold of power of PduG outlet.rw INTEGER UNITS "1W" .1.3.6.1.4.1.42610.1.4.4.1.6.2.7.3.1.10 |
outletCfgPduGOverPwrWarningThe Warning Threshold of power of PduG outlet.rw INTEGER UNITS "1W" .1.3.6.1.4.1.42610.1.4.4.1.6.2.7.3.1.11 |
pduPwrMonitoringOutletCtlTablePduGA list to display control of PduG outlet. SEQUENCE OF PduPwrMonitoringOutletCtlPduGEntry .1.3.6.1.4.1.42610.1.4.4.1.6.2.7.4 |
pduPwrMonitoringOutletCtlPduGEntryA list to display control of PduG outlet. PduPwrMonitoringOutletCtlPduGEntry .1.3.6.1.4.1.42610.1.4.4.1.6.2.7.4.1 |
outletCtlPduGIndexThe index to outlet control of PduG.ro INTEGER .1.3.6.1.4.1.42610.1.4.4.1.6.2.7.4.1.1 |
outletCtlPduGControlThe control-type of PduG outlet.rw Enumeration .1.3.6.1.4.1.42610.1.4.4.1.6.2.7.4.1.2 |
pduPwrMonitoringOutletPduH OBJECT IDENTIFIER .1.3.6.1.4.1.42610.1.4.4.1.6.2.8 |
pduPwrMonitoringOutletNumPduHThe number of PduH Outlet.ro INTEGER .1.3.6.1.4.1.42610.1.4.4.1.6.2.8.1 |
pduPwrMonitoringOutletStatusTablePduHA list to display status of PduH outlet. SEQUENCE OF PduPwrMonitoringOutletStatusPduHEntry .1.3.6.1.4.1.42610.1.4.4.1.6.2.8.2 |
pduPwrMonitoringOutletStatusPduHEntryA list to display status of PduH outlet. PduPwrMonitoringOutletStatusPduHEntry .1.3.6.1.4.1.42610.1.4.4.1.6.2.8.2.1 |
outletPduHIndexThe index to outlet status of PduH.ro INTEGER .1.3.6.1.4.1.42610.1.4.4.1.6.2.8.2.1.1 |
outletPduHStateThe state of PduH outlet.ro Enumeration .1.3.6.1.4.1.42610.1.4.4.1.6.2.8.2.1.2 |
outletPduHCurrentThe current of PduH outlet.ro INTEGER UNITS "0.01A" .1.3.6.1.4.1.42610.1.4.4.1.6.2.8.2.1.3 |
outletPduHPwrFactorThe power factor of PduH outlet.ro INTEGER UNITS "0.1%" .1.3.6.1.4.1.42610.1.4.4.1.6.2.8.2.1.4 |
outletPduHPowerThe active power of PduH outlet.ro INTEGER UNITS "0.1W" .1.3.6.1.4.1.42610.1.4.4.1.6.2.8.2.1.5 |
outletPduHEnergyThe energy of PduH outlet.ro INTEGER UNITS "KWh" .1.3.6.1.4.1.42610.1.4.4.1.6.2.8.2.1.6 |
outletPduHResetFromThe reset date of PduH outlet.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.42610.1.4.4.1.6.2.8.2.1.7 |
outletPduHStatusThe status of PduH outlet.ro Enumeration .1.3.6.1.4.1.42610.1.4.4.1.6.2.8.2.1.8 |
outletPduHAppPowerThe apparent power of PduH outlet.ro INTEGER UNITS "0.1W" .1.3.6.1.4.1.42610.1.4.4.1.6.2.8.2.1.9 |
outletPduHVoltageThe voltage of PduH outlet.ro INTEGER UNITS "0.1V" .1.3.6.1.4.1.42610.1.4.4.1.6.2.8.2.1.10 |
pduPwrMonitoringOutletCfgTablePduHA list to display configuration of PduH outlet. SEQUENCE OF PduPwrMonitoringOutletCfgPduHEntry .1.3.6.1.4.1.42610.1.4.4.1.6.2.8.3 |
pduPwrMonitoringOutletCfgPduHEntryA list to display configuration of PduH outlet. PduPwrMonitoringOutletCfgPduHEntry .1.3.6.1.4.1.42610.1.4.4.1.6.2.8.3.1 |
outletCfgPduHIndexThe index to outlet configuration of PduH.ro INTEGER .1.3.6.1.4.1.42610.1.4.4.1.6.2.8.3.1.1 |
outletCfgPduHNameThe name for outlet of PduH.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.42610.1.4.4.1.6.2.8.3.1.2 |
outletCfgPduHDelayOnStatusThe Delay On status of PduH outlet.rw Enumeration .1.3.6.1.4.1.42610.1.4.4.1.6.2.8.3.1.3 |
outletCfgPduHDelayOnTimeThe Delay On time of PduH outlet.rw INTEGER UNITS "seconds" .1.3.6.1.4.1.42610.1.4.4.1.6.2.8.3.1.4 |
outletCfgPduHDelayOffStatusThe Delay Off status of PduH outlet.rw Enumeration .1.3.6.1.4.1.42610.1.4.4.1.6.2.8.3.1.5 |
outletCfgPduHDelayOffTimeThe Delay Off time of PduH outlet.rw INTEGER UNITS "seconds" .1.3.6.1.4.1.42610.1.4.4.1.6.2.8.3.1.6 |
outletCfgPduHRebootThe Delay On reboot duration of PduH outlet.rw INTEGER UNITS "seconds" .1.3.6.1.4.1.42610.1.4.4.1.6.2.8.3.1.7 |
outletCfgPduHOverCurrCriticalThe Critical Threshold of current of PduH outlet.rw INTEGER UNITS "0.1A" .1.3.6.1.4.1.42610.1.4.4.1.6.2.8.3.1.8 |
outletCfgPduHOverCurrWarningThe Warning Threshold of current of PduH outlet.rw INTEGER UNITS "0.1A" .1.3.6.1.4.1.42610.1.4.4.1.6.2.8.3.1.9 |
outletCfgPduHOverPwrCriticalThe Critical Threshold of power of PduH outlet.rw INTEGER UNITS "1W" .1.3.6.1.4.1.42610.1.4.4.1.6.2.8.3.1.10 |
outletCfgPduHOverPwrWarningThe Warning Threshold of power of PduH outlet.rw INTEGER UNITS "1W" .1.3.6.1.4.1.42610.1.4.4.1.6.2.8.3.1.11 |
pduPwrMonitoringOutletCtlTablePduHA list to display control of PduH outlet. SEQUENCE OF PduPwrMonitoringOutletCtlPduHEntry .1.3.6.1.4.1.42610.1.4.4.1.6.2.8.4 |
pduPwrMonitoringOutletCtlPduHEntryA list to display control of PduH outlet. PduPwrMonitoringOutletCtlPduHEntry .1.3.6.1.4.1.42610.1.4.4.1.6.2.8.4.1 |
outletCtlPduHIndexThe index to outlet control of PduH.ro INTEGER .1.3.6.1.4.1.42610.1.4.4.1.6.2.8.4.1.1 |
outletCtlPduHControlThe control-type of PduH outlet.rw Enumeration .1.3.6.1.4.1.42610.1.4.4.1.6.2.8.4.1.2 |
pduEnvMonitoring OBJECT IDENTIFIER .1.3.6.1.4.1.42610.1.4.4.1.7 |
pduEmdStatusTableA list to display status of EMD. SEQUENCE OF PduEnvMonitoringStatus .1.3.6.1.4.1.42610.1.4.4.1.7.1 |
pduEnvMonitoringStatusA list to display status of EMD. PduEnvMonitoringStatus .1.3.6.1.4.1.42610.1.4.4.1.7.1.1 |
pduEnvStatusIndexThe index to EMD status entry.ro INTEGER .1.3.6.1.4.1.42610.1.4.4.1.7.1.1.1 |
pduEnvMonitoringTempThe temperature of EMD.ro INTEGER UNITS "degC" .1.3.6.1.4.1.42610.1.4.4.1.7.1.1.2 |
pduEnvMonitoringHumiThe humidity of EMD.ro INTEGER UNITS "0.1%" .1.3.6.1.4.1.42610.1.4.4.1.7.1.1.3 |
pduEnvMonitoringTempAlarmThe temperature status of EMD.ro Enumeration .1.3.6.1.4.1.42610.1.4.4.1.7.1.1.4 |
pduEnvMonitoringHumiAlarmThe humidity status of EMD.ro Enumeration .1.3.6.1.4.1.42610.1.4.4.1.7.1.1.5 |
pduEnvMonitoringAlarm1The alarm-1 status of EMD.ro Enumeration .1.3.6.1.4.1.42610.1.4.4.1.7.1.1.6 |
pduEnvMonitoringAlarm2The alarm-2 status of EMD.ro Enumeration .1.3.6.1.4.1.42610.1.4.4.1.7.1.1.7 |
pduEmdCfgTableA list to display configure of EMD. SEQUENCE OF PduEnvMonitoringCfg .1.3.6.1.4.1.42610.1.4.4.1.7.2 |
pduEnvMonitoringCfgA list to display configure of EMD. PduEnvMonitoringCfg .1.3.6.1.4.1.42610.1.4.4.1.7.2.1 |
pduEnvCfgIndexThe index to EMD configure entry.ro INTEGER .1.3.6.1.4.1.42610.1.4.4.1.7.2.1.1 |
pduEnvMonitoringControlEnable/disable the EMD alarm configuration.rw Enumeration .1.3.6.1.4.1.42610.1.4.4.1.7.2.1.2 |
pduEnvMonitoringTempHighCriticalThe High Critical Threshold of temperature of EMD.rw INTEGER UNITS "degC" .1.3.6.1.4.1.42610.1.4.4.1.7.2.1.3 |
pduEnvMonitoringTempHighWarningThe High Warning Threshold of temperature of EMD.rw INTEGER UNITS "degC" .1.3.6.1.4.1.42610.1.4.4.1.7.2.1.4 |
pduEnvMonitoringTempLowCriticalThe Low Critical Threshold of temperature of EMD.rw INTEGER UNITS "degC" .1.3.6.1.4.1.42610.1.4.4.1.7.2.1.5 |
pduEnvMonitoringTempLowWarningThe Low Warning Threshold of temperature of EMD.rw INTEGER UNITS "degC" .1.3.6.1.4.1.42610.1.4.4.1.7.2.1.6 |
pduEnvMonitoringTempHystersisThe Hystersis of Temperature of EMD.rw INTEGER UNITS "degC" .1.3.6.1.4.1.42610.1.4.4.1.7.2.1.7 |
pduEnvMonitoringTempOffsetThe Offset of Temperature of EMD.rw INTEGER UNITS "degC" .1.3.6.1.4.1.42610.1.4.4.1.7.2.1.8 |
pduEnvMonitoringHumiHighCriticalThe High Crtitcal Threshold of humidity of EMD.rw INTEGER UNITS "0.1%" .1.3.6.1.4.1.42610.1.4.4.1.7.2.1.9 |
pduEnvMonitoringHumiHighWarningThe High Warning Threshold of humidity of EMD.rw INTEGER UNITS "0.1%" .1.3.6.1.4.1.42610.1.4.4.1.7.2.1.10 |
pduEnvMonitoringHumiLowCriticalThe Low Crtitcal Threshold of humidity of EMD.rw INTEGER UNITS "0.1%" .1.3.6.1.4.1.42610.1.4.4.1.7.2.1.11 |
pduEnvMonitoringHumiLowWarningThe Low Warning Threshold of humidity of EMD.rw INTEGER UNITS "0.1%" .1.3.6.1.4.1.42610.1.4.4.1.7.2.1.12 |
pduEnvMonitoringHumiHystersisThe Hystersis of Humidity of EMD.rw INTEGER UNITS "0.1%" .1.3.6.1.4.1.42610.1.4.4.1.7.2.1.13 |
pduEnvMonitoringHumiOffsetThe Ofset of Humidity of EMD.rw INTEGER UNITS "0.1%" .1.3.6.1.4.1.42610.1.4.4.1.7.2.1.14 |
pduEnvMonitoringAlarm1SetupThe Alarm-1 setup of EMD.rw Enumeration .1.3.6.1.4.1.42610.1.4.4.1.7.2.1.15 |
pduEnvMonitoringAlarm2SetupThe Alarm-2 setup of EMD.rw Enumeration .1.3.6.1.4.1.42610.1.4.4.1.7.2.1.16 |
pduTraps OBJECT IDENTIFIER .1.3.6.1.4.1.42610.1.4.4.2 |
pduSystemColdBootInformational: Cold boot. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.1 |
pduSystemWarmBootInformational: Warm boot. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.2 |
pduSystemRestartInformational: System restart. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.3 |
pduResetToDefaultInformational: Parameters reset to default. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.4 |
pduFirmUpgradeInformational: Firmware upgrade. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.5 |
pduSystemLogClearInformational: System log cleared. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.6 |
pduEventlogClearInformational: Event log cleared. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.7 |
pduInletHistoryClearInformational: Inlet history log cleared. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.8 |
pduOutletHistoryClearInformational: Outlet history log cleared. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.9 |
pduSystemTimeChangeUserInformational: Time changed by user. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.10 |
pduSystemTimeChangeNtpInformational: Time synced with NTP server. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.11 |
pduSystemTimeChangeRtcInformational: Time changed by RTC. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.12 |
pduMailTestPassInformational: Test mail pass. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.13 |
pduMailTestFailInformational: Test mail failed. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.14 |
pduMailSentPassInformational: Mail sent successfully. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.15 |
pduMailSentFailInformational: Mail sent failed. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.16 |
pduSystemCfgChangeInformational: Parameter changed. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.17 |
pduSystemParamImportInformational: Import XML configuration. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.18 |
pduInletCommLostInformational: Inlet communication lost. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.19 |
pduInletCommRestoreInformational: Inlet communication restore. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.20 |
pduOutletCommLostInformational: Outlet communication lost. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.21 |
pduOutletCommRestoreInformational: Outlet communication restore TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.22 |
pduOutletOnUserInformational: Outlet turned on by user. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.23 |
pduOutletOnScheduleInformational: Outlet turned on by schedule. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.24 |
pduOutletOffUserInformational: Outlet turned off by user. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.25 |
pduOutletOffScheduleInformational: Outlet turned off by schedule. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.26 |
pduOutletRebootUserInformational: Outlet reboot by user. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.27 |
pduOutletRebootScheduleInformational: Outlet reboot by schedule. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.28 |
pduInletEnergyResetInformational: Inlet energy reset. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.29 |
pduOutletEnergyResetInformational: Outlet energy reset. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.30 |
pduSetUserInformational: Assign outlet to user. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.31 |
pduDeletUserInformational: Delete user. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.32 |
pduUpgradeInletSuccessInformational: Inlet upgrade successfully. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.33 |
pduUpgradeInletFailInformational: Inlet upgrade fail. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.34 |
pduUpgradeOutletSuccessInformational: Outlet upgrade successfully. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.35 |
pduUpgradeOutletFailInformational: Outlet upgrade fail. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.36 |
pduEmdHistoryLogClearInformational: EMD history log cleared. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.37 |
pduAccountResetDefaultInformational: The default accounts had been reset to default value. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.38 |
pduUpgradeExtEmdSuccessInformational: External EMD board upgrade successfully. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.39 |
pduUpgradeExtEmdFailInformational: External EMD board upgrade fail. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.40 |
pduGroupOutletChangedInformational: The Administrator has changed the authority of Outlet Manager, the Grouping setting will be cleared synchronously. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.41 |
pduScheduleOutletChangedInformational: The Administrator has changed the authority of Outlet Manager, the Schedule setting will be cleared synchronously. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.42 |
pduGroupChangedInformational: The Outlet Manger has changed the setting of Outlet Grouping, the Schedule will be cleared synchronously. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.43 |
pduSnmpConflictsInformational: Inlet polling issues due to SNMP conflicts. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.44 |
pduInletEnergyResetPhase1Informational: Inlet phase1 energy reset. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.45 |
pduInletEnergyResetPhase2Informational: Inlet phase2 energy reset. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.46 |
pduInletEnergyResetPhase3Informational: Inlet phase3 energy reset. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.47 |
pduEmdTempHighWarnToNormalInformational: Temperature had returned from high warning to normal. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.101 |
pduEmdTempHighWarnWarning: Temperature was higher than high warning set point. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.102 |
pduEmdTempLowWarnToNormalInformational: Temperature had returned from low warning to normal. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.103 |
pduEmdTempLowWarnWarning: Temperature was lower than low warning set point. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.104 |
pduEmdTempHighCritToWarnInformational: Temperature had returned from high critical to high warning. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.105 |
pduEmdTempHighCriticalCritical: Temperature was higher than high critical set point. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.106 |
pduEmdTempLowCritToWarnInformational: Temperature had returned from low critical to low warning. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.107 |
pduEmdTempLowCriticalCritical: Temperature was lower than low critical set point. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.108 |
pduEmdHumiHighWarnToNormalInformational: Humidity had returned from high warning to normal. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.109 |
pduEmdHumiHighWarnWarning: Humidity was higher than high warning set point. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.110 |
pduEmdHumiLowWarnToNormalInformational: Humidity had returned from low warning to normal. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.111 |
pduEmdHumiLowWarnWarning: Humidity was lower than low warning set point. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.112 |
pduEmdHumiHighCritToWarnInformational: Humidity had returned from high critical to high warning. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.113 |
pduEmdHumiHighCriticalCritical: Humidity was higher than high critical set point. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.114 |
pduEmdHumiLowCritToWarnInformational: Humidity had returned from low critical to low warning. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.115 |
pduEmdHumiLowCriticalCritical: Humidity was lower than low critical set point. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.116 |
pduEmdAlarm1NotActiveInformational: Alarm-1 became inactive. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.117 |
pduEmdAlarm1ActiveWarning: Alarm-1 became active. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.118 |
pduEmdAlarm2NotActiveInformational: Alarm-2 became inactive. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.119 |
pduEmdAlarm2ActiveWarning: Alarm-2 became active. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.120 |
pduRs485OnlineInformational: RS485 Sensor was online. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.121 |
pduRs485OfflineWarning: RS485 Sensor was offline. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.122 |
pduInletLoadCritToWarnInformational: Inlet load had returned from critical to warning. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.123 |
pduInletLoadCriticalCritical: Inlet load was higher than critical set point. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.124 |
pduInletLoadWarnToNormalInformational: Inlet load had returned from warning to normal. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.125 |
pduInletLoadWarnWarning: Inlet load was higher than warning set point. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.126 |
pduInletCurrPhase1CritToWarnInformational: Inlet phase1 current had returned from critical to warning. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.127 |
pduInletCurrPhase1CriticalCritical: Inlet phase1 current was higher than critical set point. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.128 |
pduInletCurrPhase1WarnToNormalInformational: Inlet phase1 current had returned from warning to normal. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.129 |
pduInletCurrPhase1WarnWarning: Inlet phase1 current was higher than warning set point. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.130 |
pduInletCurrPhase2CritToWarnInformational: Inlet phase2 current had returned from critical to warning. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.131 |
pduInletCurrPhase2CriticalCritical: Inlet phase2 current was higher than critical set point. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.132 |
pduInletCurrPhase2WarnToNormalInformational: Inlet phase2 current had returned from warning to normal. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.133 |
pduInletCurrPhase2WarnWarning: Inlet phase2 current was higher than warning set point. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.134 |
pduInletCurrPhase3CritToWarnInformational: Inlet phase3 current had returned from critical to warning. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.135 |
pduInletCurrPhase3CriticalCritical: Inlet phase3 current was higher than critical set point. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.136 |
pduInletCurrPhase3WarnToNormalInformational: Inlet phase3 current had returned from warning to normal. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.137 |
pduInletCurrPhase3WarnWarning: Inlet phase3 current had returned from critical to warning. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.138 |
pduInletVoltPhase1CritToWarnInformational: Inlet phase1 voltage had returned from critical to warning. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.139 |
pduInletVoltPhase1CriticalCritical: Inlet phase1 voltage was higher than critical set point. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.140 |
pduInletVoltPhase1WarnToNormalInformational: Inlet phase1 voltage had returned from warning to normal. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.141 |
pduInletVoltPhase1WarnWarning: Inlet phase1 voltage was higher than warning set point. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.142 |
pduInletVoltPhase2CritToWarnInformational: Inlet phase2 voltage had returned from critical to warning. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.143 |
pduInletVoltPhase2CriticalCritical: Inlet phase2 voltage was higher than critical set point. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.144 |
pduInletVoltPhase2WarnToNormalInformational: Inlet phase2 voltage had returned from warning to normal. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.145 |
pduInletVoltPhase2WarnWarning: Inlet phase2 voltage was higher than warning set point. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.146 |
pduInletVoltPhase3CritToWarnInformational: Inlet phase3 voltage had returned from critical to warning. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.147 |
pduInletVoltPhase3CriticalCritical: Inlet phase3 voltage was higher than critical set point. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.148 |
pduInletVoltPhase3WarnToNormalInformational: Inlet phase3 voltage had returned from warning to normal. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.149 |
pduInletVoltPhase3WarnWarning: Inlet phase3 voltage was higher than warning set point. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.150 |
pduOutletCurrCritToWarnInformational: Outlet current had returned from critical to warning. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.151 |
pduOutletCurrCriticalCritical: Outlet current was higher than critical set point. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.152 |
pduOutletCurrWarnToNormalInformational: Outlet current had returned from warning to normal. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.153 |
pduOutletCurrWarnWarning: Outlet current was higher than warning set point. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.154 |
pduOutletPwrCritTOWarnInformational: Outlet power had returned from critical to warning. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.155 |
pduOutletPwrCriticalCritical: Outlet power was higher than critical set point. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.156 |
pduOutletPwrWarnToNormalInformational: Outlet power had returned from warning to normal. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.157 |
pduOutletPwrWarnWarning: Outlet power was higher than warning set point. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.158 |
pduAlarm1DisabledInformational: Alarm-1 became disabled. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.159 |
pduAlarm2DisabledInformational: Alarm-2 became disabled. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.160 |
pduIntetResidualCurrect1OccuredCritical: Inlet Residual current occurred. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.161 |
pduIntetResidualCurrect1RemoveInformational: Inlet Residual current removed. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.162 |
pduInletLoadBalanceCritToWarnInformational: Inlet load balance had returned from critical to warning. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.163 |
pduInletLoadBalanceCriticalCritical: Inlet load balance was higher than critical set point. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.164 |
pduInletLoadBalanceWarnToNormalInformational: Inlet load balance had returned from warning to normal. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.165 |
pduInletLoadBalanceWarnWarning: Inlet load balance was higher than warning set point. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.166 |
pduInletAcFailCritical: INPUT AC fail. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.167 |
pduInletAcRestoreWarning: INPUT AC restore. TRAP-TYPE .1.3.6.1.4.1.42610.1.4.4.2.0.168 |
More MIBs from Powertek
Browse all PowertekMIBs →SPS2v1-MIB
Standard SNMP MIB module defining data structures for SPS2v1-MIB.
1652 objects→
SPS2v2-MIB
The SPS2v2-MIB module facilitates SNMP-based monitoring and management of specific enterprise hardware or software components, typically associated with vendor-specific implementations of Session Processing Systems or similar network appliances. While the provided description lacks granularity, this MIB standardly exposes operational metrics such as session states, throughput counters, and interface statistics for troubleshooting and performance analysis within the enterprise network infrastructure.
1652 objects→
SimplePDU-MIB
Standard SNMP MIB module defining data structures for SimplePDU-MIB.
443 objects→
SPSv1-MIB
Standard SNMP MIB module defining data structures for SPSv1-MIB.
383 objects→