PW-SATOP-MIB
AI MIB Summary
The PW-SATOP-MIB module manages and monitors Structure-Agnostic TDM over Packet (SATOP) pseudo-wire sessions, specifically tracking the encapsulation and transport of T1, E1, T3, and E3 bit-streams across packet-switched networks. It provides configuration parameters and performance statistics for these specific TDM emulation services, including session states, packet loss counters, and latency metrics, while maintaining associations with the generic PW-STD-MIB framework.
This MIB contains managed object definitions for encapsulating TDM bit-streams (T1,E1, T3, E3) as pseudo-wires over packet-switching networks (PSN). as in: Structure- Agnostic TDM over Packet [SATOP].
This MIB reports to the PW-STD-MIB as in: Zelig, D., Nadeau, T. 'Pseudo Wire (PW) Management Information Base'. The PW-STD-MIB contains structures and MIB associations generic to Pseudo-Wire (PW) emulation. PW-specific MIBs (such as this) contain config and stats for specific PW types.
Copyright (C) The Internet Society (2004). This version of this MIB module is part of RFC yyyy; see the RFC itself for full legal notices.
Main OID:
pwVcSatopMIB.1.3.6.1.2.1.10.246.x
22
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
22 total| Object Name |
|---|
pwVcSatopMIBThis MIB contains managed object definitions for
encapsulating TDM bit-streams (T1,E1, T3, E3) as
pseudo-wires over packet-switching networks (PSN).
as in: Structure- Agnostic TDM over Packet [SATOP].
This MIB reports to the PW-STD-MIB as in: Zelig, D., Nadeau,
T. 'Pseudo Wire (PW) Management Information Base'. The
PW-STD-MIB contains structures and MIB associations generic
to Pseudo-Wire (PW) emulation. PW-specific
MIBs (such as this) contain config and stats for specific
PW types.
Copyright (C) The Internet Society (2004). This version
of this MIB module is part of RFC yyyy; see the RFC
itself for full legal notices. MODULE-IDENTITY .1.3.6.1.2.1.10.246.x |
pwVcSatopObjects OBJECT IDENTIFIER .1.3.6.1.2.1.10.246.x.1 |
pwVcSatopCfgIndexNextThis object contains the value to be used for
pwVcSatopCfgIndex when creating entries in the
pwVcSatopCfgTable. The value 0 indicates that no
unassigned entries are available. To obtain the
value of pwVcSatopCfgIndex for a new entry in the
pwVcSatopCfgTable, the manager issues a management
protocol retrieval operation to obtain the current
value of pwVcSatopCfgIndex. After each retrieval
operation, the agent should modify the value to
reflect the next unassigned index. After a manager
retrieves a value the agent will determine through
its local policy when this index value will be made
available for reuse.ro PwVcTDMCfgIndex .1.3.6.1.2.1.10.246.x.1.1 |
pwVcSatopCfgTableThis table contains a set of parameters that may be
referenced by one or more SAToP PWs in pwVcTDMTable. SEQUENCE OF PwVcSatopCfgEntry .1.3.6.1.2.1.10.246.x.1.2 |
pwVcSatopCfgEntryThese parameters define the characteristics of a
SAToP PW. They are grouped here to ease NMS burden.
Once an entry is created here it may be re-used
by many PWs. PwVcSatopCfgEntry .1.3.6.1.2.1.10.246.x.1.2.1 |
pwVcSatopCfgIndexPrimary index inthis table PwVcTDMCfgIndex .1.3.6.1.2.1.10.246.x.1.2.1.1 |
pwVcSatopCfgRowStatusObject used for creating, modifying, and deleting
a row from this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.2.1.10.246.x.1.2.1.2 |
pwVcSatopCfgConsecPktsLoss2NormalThe number of consecutive packets with sequential
sequence numbers that are required to exit the
LOPS state.rw Unsigned32 .1.3.6.1.2.1.10.246.x.1.2.1.3 |
pwVcSatopCfgConsecMissPktNorma2LossThe number of consecutive missing packets that are
required to enter the LOPS state.rw Unsigned32 .1.3.6.1.2.1.10.246.x.1.2.1.4 |
pwVcSatopCfgPktReplacePolicyThis is the value to be played when CE bound packets
have over/underflow the jitter buffer, or are missing
for any reason. This byte pattern is sent (played) on
the TDM line.rw Enumeration .1.3.6.1.2.1.10.246.x.1.2.1.5 |
pwVcSatopCfgTDMDataSetUp2SynchThe SAToP IWF is in an intermediate state until this
amount of TDM data bytes (usually half of the jitter
buffer) has been received in consecutive SAToP packets.
default value is set for E1 line.rw Unsigned32 .1.3.6.1.2.1.10.246.x.1.2.1.6 |
pwVcSatopCfgSetUp2SynchTimeOutThe intermediate state timer is set to this value. The SAToP
IWF is in an intermediate state until
pwVcSatopCfgTDMDataSetUp2Synch amount of TDM data bytes
has been received in consecutive SAToP packets or until this
timer expires. The timer units are (millisec)rw Unsigned32 .1.3.6.1.2.1.10.246.x.1.2.1.7 |
pwVcSatopCfgAlarmThresholdAlarms are only reported when the defect state persists
for the length of time specified by this object.
The object's unit is millisecrw Unsigned32 .1.3.6.1.2.1.10.246.x.1.2.1.8 |
pwVcSatopCfgClearAlarmThresholdAlarm MUST be cleared after the corresponding defect is
undetected for the amount of time specified by this object.
The object's unit is millisecrw Unsigned32 .1.3.6.1.2.1.10.246.x.1.2.1.9 |
pwVcSatopCfgExcessivePktLossThresholdExcessive packet loss rate is detected by computing the
average packetloss rate over a pwVcSatopCfgAvePktLossTimeWindow
amount of time and comparing it with this threshold value.rw Unsigned32 .1.3.6.1.2.1.10.246.x.1.2.1.10 |
pwVcSatopCfgMissingPktsToSesNumber of missing packets detected (consecutive or not)
within a 1 second window to cause a Severely Error
Second (SES) to be counted.rw Unsigned32 UNITS "seconds" .1.3.6.1.2.1.10.246.x.1.2.1.11 |
pwVcSatopCfgTimestampModeTimestamp generation MAY be used in one of the following
modes:
1. Absolute mode: the PSN-bound IWF sets timestamps
using the clock recovered from the incoming TDM attachment
circuit. As a consequence, the timestamps are closely
correlated with the sequence numbers. All SAToP implementations
that support usage of the RTP header MUST support this mode.
2. Differential mode: Both IWFs have access to a common high-
quality timing source, and this source is used for timestamp
generation. Support of this mode is OPTIONAL.rw Enumeration .1.3.6.1.2.1.10.246.x.1.2.1.12 |
pwVcSatopCfgStorageTypeThis variable indicates the storage type for this
row.rw StorageType (SNMPv2-TC) .1.3.6.1.2.1.10.246.x.1.2.1.13 |
pwVcSatopTraps OBJECT IDENTIFIER .1.3.6.1.2.1.10.246.x.2 |
pwVcSatopConformance OBJECT IDENTIFIER .1.3.6.1.2.1.10.246.x.3 |
pwVcSatopGroups OBJECT IDENTIFIER .1.3.6.1.2.1.10.246.x.3.1 |
pwVcSatopCompliances OBJECT IDENTIFIER .1.3.6.1.2.1.10.246.x.3.2 |