PW-L2TPv3-DRAFT-00-MIB
AI MIB Summary
The PW-L2TPv3-DRAFT-00-MIB module enables the monitoring and management of Layer 2 pseudowire sessions encapsulated within L2TPv3 tunnels, specifically tracking session states, control channel parameters, and associated counter metrics for PW-STD-MIB compliance. This module facilitates the operational visibility of L2TPv3-based transport mechanisms in MPLS and Ethernet service provider networks by exposing granular status and performance data for pseudowire endpoints.
This MIB module complements the PW-STD-MIB module for PW operation over L2TPv3. Copyright (C) The Internet Society (2006). This version of this MIB module is part of RFC yyyy; see the RFC itself for full legal notices. -- RFC Ed.: replace yyyy with actual RFC number & remove -- this note
Main OID:
pwL2tpv3Draft00MIB.1.3.6.1.2.1.10.1
21
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
21 total| Object Name |
|---|
pwL2tpv3Draft00MIBThis MIB module complements the PW-STD-MIB module for PW operation over L2TPv3. Copyright (C) The Internet Society (2006). This version of this MIB module is part of RFC yyyy; see the RFC itself for full legal notices. -- RFC Ed.: replace yyyy with actual RFC number & remove -- this note MODULE-IDENTITY .1.3.6.1.2.1.10.1 |
pwL2tpv3Notifications OBJECT IDENTIFIER .1.3.6.1.2.1.10.1.0 |
pwL2tpv3Objects OBJECT IDENTIFIER .1.3.6.1.2.1.10.1.1 |
pwL2tpv3TableThis table controls L2TPv3 specific parameters when the PW is going to be carried over L2TPv3. SEQUENCE OF PwL2tpv3Entry .1.3.6.1.2.1.10.1.1.1 |
pwL2tpv3EntryA row in this table represents parameters specific to L2TPv3 for a pseudo wire (PW). A row MUST be created automatically by the local agent for every entry in the pwTable if the pwPsnType is l2tp. Each entry is indexed by pwIndex, which uniquely identifies a singular PW. A row can also be created manually in this table. PwL2tpv3Entry .1.3.6.1.2.1.10.1.1.1.1 |
pwL2tpv3SessionCfgIfIndexThe interface index for the corresponding L2TP interface to which this PW session is associated. The value of this object must correspond to the value of l2tpv3SessionCfgIfIndex in the l2tpv3SessionCfgTable.rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.2.1.10.1.1.1.1.1 |
pwL2tpv3CtrlCfgRouterIDThe local router ID of this peer, as communicated via the Router ID AVP for this control connection. The value of this object corresponds to the value of l2tpv3CtrlCfgRouterID in l2tpv3CtrlCfgTable.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.2.1.10.1.1.1.1.2 |
pwL2tpv3LocalSessionIDThe local L2TPv3 session id for this PW. The value of this object corresponds to the l2tpv3SessionCfgLocalID in l2tpv3SessionCfgTable.rw Unsigned32 .1.3.6.1.2.1.10.1.1.1.1.3 |
pwL2tpv3RemoteSessionIDThe remote L2TPv3 session id for this PW. The value of this object corresponds to the l2tpv3SessionCfgRemoteID in l2tpv3SessionCfgTable.rw Unsigned32 .1.3.6.1.2.1.10.1.1.1.1.4 |
pwL2tpv3OperTypeSet by the operator to indicate the operation type of this PW.rw Bits .1.3.6.1.2.1.10.1.1.1.1.5 |
pwL2tpv3DataSequencingSet by the operator to indicate data sequencing. noSeq(0) - No incoming data packets require sequencing. nonIpSeq(0)- Only non-IP data packets require sequencing. allSeq(2) - All incoming data packets require sequencing.rw Enumeration .1.3.6.1.2.1.10.1.1.1.1.6 |
pwL2tpv3AddrResolThe value of this object indicates the point-to-point address resolution mechanism for this PW.rw Enumeration .1.3.6.1.2.1.10.1.1.1.1.7 |
pwL2tpv3MtuSet by the operator to indicate the PW MTU value to be used on the PW.rw Unsigned32 .1.3.6.1.2.1.10.1.1.1.1.8 |
pwL2tpv3StorageTypeThis variable indicates the storage type for this row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.rw StorageType (SNMPv2-TC) .1.3.6.1.2.1.10.1.1.1.1.9 |
pwL2tpv3RowStatusThis variable is used to create, modify, and/or delete a row in this table. When a row in this table is in active(1) state, no objects in that row can be modified by the agent except pwL2tpv3RowStatus and pwL2tpv3StorageType.rw RowStatus (SNMPv2-TC) .1.3.6.1.2.1.10.1.1.1.1.10 |
pwL2tpv3Conformance OBJECT IDENTIFIER .1.3.6.1.2.1.10.1.2 |
pwL2tpv3Groups OBJECT IDENTIFIER .1.3.6.1.2.1.10.1.2.1 |
pwL2tpv3GroupCollection of objects needed for PW over L2TPv3 PSN configuration. Unknown .1.3.6.1.2.1.10.1.2.1.1 |
pwL2tpv3Compliances OBJECT IDENTIFIER .1.3.6.1.2.1.10.1.2.2 |
pwL2tpv3ModuleFullComplianceThe compliance statement for agents that provide full support for PW-L2TP MIB Module. Such devices can then be monitored and also be configured using this MIB module. Unknown .1.3.6.1.2.1.10.1.2.2.1 |
pwL2tpv3ModuleReadOnlyComplianceThe compliance statement for agents that provide read only support for PW-L2TP MIB Module. Such devices can then be monitored but cannot be configured using this MIB module. Unknown .1.3.6.1.2.1.10.1.2.2.2 |