PTPBASE-MIB
AI MIB Summary
The PTPBASE-MIB provides standard SNMP management objects for monitoring and configuring Precision Time Protocol version 2 (IEEE 1588-2008) instances on IP network elements, specifically tracking clock identity, port status, synchronization state, and clock quality metrics. It enables the observation of sub-microsecond time synchronization performance, including grandmaster clock selection and delay measurement data, for heterogeneous systems requiring high-precision time distribution.
The MIB module for PTP version 2 Copyright (c) 2017 IETF Trust and the persons identified as authors of the code. All rights reserved. Redistribution and use in source and binary forms, with or without modification, is permitted pursuant to, and subject to the license terms contained in, the Simplified BSD License set forth in Section 4.c of the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info). Overview of PTP version 2 (IEEE Std. 1588-2008) [IEEE-1588-2008] defines a protocol enabling precise synchronization of clocks in measurement and control systems implemented with packet-based networks, the Precision Time Protocol version 2 (PTPv2). This MIB module does not address PTPv1, the earlier version defined in IEEE Std. 1588-2002. The protocol is applicable to network elements communicating using IP. The protocol enables heterogeneous systems that include clocks of various inherent precision, resolution, and stability to synchronize to a grandmaster clock. The protocol supports system-wide synchronization accuracy in the sub-microsecond range with minimal network and local clock computing resources. [IEEE-1588-2008] uses UDP/IP or Ethernet and can be adapted to other mappings. It includes formal mechanisms for message extensions, higher sampling rates, correction for asymmetry, a clock type to reduce error accumulation in large topologies, and specifications on how to incorporate the resulting additional data into the synchronization protocol. [IEEE-1588-2008] also defines conformance and management capability. MIB description This MIB module supports the Precision Time Protocol version 2 (PTPv2, hereafter designated as PTP) features of network element system devices, when using the default PTP profile described in [IEEE-1588-2008] when running over the IP network layer. It is envisioned that this MIB module will complement other managed objects to be defined to monitor and measure the performance of the PTP devices and telecom clocks supporting specific PTP profiles. Some other PTP profiles have their own MIB modules defined as part of the profile, and this MIB module is not intended to replace those MIB modules. Technical terms used in this module are defined in [IEEE-1588-2008]. The MIB module refers to sections of [IEEE-1588-2008]. Abbreviations: E2E End-to-End EUI Extended Unique Identifier GPS Global Positioning System IANA Internet Assigned Numbers Authority IP Internet Protocol NTP Network Time Protocol (see [RFC5905]) P2P Peer-to-Peer PTP Precision Time Protocol TAI International Atomic Time UDP User Datagram Protocol UTC Coordinated Universal Time References: [IEEE-1588-2008] IEEE Standard for A Precision Clock Synchronization Protocol for Networked Measurement and Control Systems, IEEE Std. 1588-2008, July 2008. The below table specifies the object formats of the various textual conventions used. Data type mapping Textual Convention SYNTAX ------------------- --------------------- ------------------ 5.3.2 TimeInterval PtpClockTimeInterval OCTET STRING(SIZE(1..255)) 5.3.3 Timestamp PtpClockTimestamp OCTET STRING(SIZE(6)) 5.3.4 ClockIdentity PtpClockIdentity OCTET STRING(SIZE(8)) 5.3.5 PortIdentity PtpClockPortNumber INTEGER(1..65535) 5.3.7 ClockQuality PtpClockQualityClassType
Main OID:
ptpbaseMIB.1.3.6.1.2.1.241
179
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
179 total| Object Name |
|---|
ptpbaseMIBThe MIB module for PTP version 2 Copyright (c) 2017 IETF Trust and the persons identified as authors of the code. All rights reserved. Redistribution and use in source and binary forms, with or without modification, is permitted pursuant to, and subject to the license terms contained in, the Simplified BSD License set forth in Section 4.c of the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info). Overview of PTP version 2 (IEEE Std. 1588-2008) [IEEE-1588-2008] defines a protocol enabling precise synchronization of clocks in measurement and control systems implemented with packet-based networks, the Precision Time Protocol version 2 (PTPv2). This MIB module does not address PTPv1, the earlier version defined in IEEE Std. 1588-2002. The protocol is applicable to network elements communicating using IP. The protocol enables heterogeneous systems that include clocks of various inherent precision, resolution, and stability to synchronize to a grandmaster clock. The protocol supports system-wide synchronization accuracy in the sub-microsecond range with minimal network and local clock computing resources. [IEEE-1588-2008] uses UDP/IP or Ethernet and can be adapted to other mappings. It includes formal mechanisms for message extensions, higher sampling rates, correction for asymmetry, a clock type to reduce error accumulation in large topologies, and specifications on how to incorporate the resulting additional data into the synchronization protocol. [IEEE-1588-2008] also defines conformance and management capability. MIB description This MIB module supports the Precision Time Protocol version 2 (PTPv2, hereafter designated as PTP) features of network element system devices, when using the default PTP profile described in [IEEE-1588-2008] when running over the IP network layer. It is envisioned that this MIB module will complement other managed objects to be defined to monitor and measure the performance of the PTP devices and telecom clocks supporting specific PTP profiles. Some other PTP profiles have their own MIB modules defined as part of the profile, and this MIB module is not intended to replace those MIB modules. Technical terms used in this module are defined in [IEEE-1588-2008]. The MIB module refers to sections of [IEEE-1588-2008]. Abbreviations: E2E End-to-End EUI Extended Unique Identifier GPS Global Positioning System IANA Internet Assigned Numbers Authority IP Internet Protocol NTP Network Time Protocol (see [RFC5905]) P2P Peer-to-Peer PTP Precision Time Protocol TAI International Atomic Time UDP User Datagram Protocol UTC Coordinated Universal Time References: [IEEE-1588-2008] IEEE Standard for A Precision Clock Synchronization Protocol for Networked Measurement and Control Systems, IEEE Std. 1588-2008, July 2008. The below table specifies the object formats of the various textual conventions used. Data type mapping Textual Convention SYNTAX ------------------- --------------------- ------------------ 5.3.2 TimeInterval PtpClockTimeInterval OCTET STRING(SIZE(1..255)) 5.3.3 Timestamp PtpClockTimestamp OCTET STRING(SIZE(6)) 5.3.4 ClockIdentity PtpClockIdentity OCTET STRING(SIZE(8)) 5.3.5 PortIdentity PtpClockPortNumber INTEGER(1..65535) 5.3.7 ClockQuality PtpClockQualityClassType MODULE-IDENTITY .1.3.6.1.2.1.241 |
ptpbaseMIBNotifs OBJECT IDENTIFIER .1.3.6.1.2.1.241.0 |
ptpbaseMIBObjects OBJECT IDENTIFIER .1.3.6.1.2.1.241.1 |
ptpbaseMIBSystemInfo OBJECT IDENTIFIER .1.3.6.1.2.1.241.1.1 |
ptpbaseSystemTableTable of count information about the PTP system for all domains. SEQUENCE OF PtpbaseSystemEntry .1.3.6.1.2.1.241.1.1.1 |
ptpbaseSystemEntryA table entry that contains count information about a single domain. New row entries are added when the PTP clock for this domain is configured, while the unconfiguration of the PTP clock removes them. PtpbaseSystemEntry .1.3.6.1.2.1.241.1.1.1.1 |
ptpDomainIndexThis object specifies the domain number used to create a logical group of PTP devices. The Clock Domain is a logical group of clocks and devices that synchronize with each other using the PTP protocol. 0 Default domain 1 Alternate domain 1 2 Alternate domain 2 3 Alternate domain 3 4 - 127 User-defined domains 128 - 255 Reserved PtpClockDomainType .1.3.6.1.2.1.241.1.1.1.1.1 |
ptpInstanceIndexThis object specifies the instance of the clock for this domain. PtpClockInstanceType .1.3.6.1.2.1.241.1.1.1.1.2 |
ptpDomainClockPortsTotalThis object specifies the total number of clock ports configured within a domain in the system.ro Gauge32 UNITS "ptp ports" .1.3.6.1.2.1.241.1.1.1.1.3 |
ptpbaseSystemDomainTableTable of information about the PTP system for all clock modes -- ordinary, boundary, or transparent. SEQUENCE OF PtpbaseSystemDomainEntry .1.3.6.1.2.1.241.1.1.2 |
ptpbaseSystemDomainEntryA table entry that contains information about a single clock mode for the PTP system. A row entry gets added when PTP clocks are configured on the node. PtpbaseSystemDomainEntry .1.3.6.1.2.1.241.1.1.2.1 |
ptpbaseSystemDomainClockTypeIndexThis object specifies the clock type as defined in the textual convention description. PtpClockType .1.3.6.1.2.1.241.1.1.2.1.1 |
ptpbaseSystemDomainTotalsThis object specifies the total number of PTP domains for this particular clock type configured in this node.ro Unsigned32 UNITS "domains" .1.3.6.1.2.1.241.1.1.2.1.2 |
ptpbaseSystemProfileThis object specifies the PTP profile implemented on the system.ro PtpClockProfileType .1.3.6.1.2.1.241.1.1.3 |
ptpbaseMIBClockInfo OBJECT IDENTIFIER .1.3.6.1.2.1.241.1.2 |
ptpbaseClockCurrentDSTableTable of information about the PTP clock currentDS for all domains. SEQUENCE OF PtpbaseClockCurrentDSEntry .1.3.6.1.2.1.241.1.2.1 |
ptpbaseClockCurrentDSEntryA table entry that contains information about a single PTP clock currentDS for a domain. PtpbaseClockCurrentDSEntry .1.3.6.1.2.1.241.1.2.1.1 |
ptpbaseClockCurrentDSDomainIndexThis object specifies the domain number used to create a logical group of PTP devices. PtpClockDomainType .1.3.6.1.2.1.241.1.2.1.1.1 |
ptpbaseClockCurrentDSClockTypeIndexThis object specifies the clock type as defined in the textual convention description. PtpClockType .1.3.6.1.2.1.241.1.2.1.1.2 |
ptpbaseClockCurrentDSInstanceIndexThis object specifies the instance of the clock for this clock type in the given domain. PtpClockInstanceType .1.3.6.1.2.1.241.1.2.1.1.3 |
ptpbaseClockCurrentDSStepsRemovedThe current clock dataset stepsRemoved value. This object specifies the distance measured by the number of boundary clocks between the local clock and the foreign master as indicated in the stepsRemoved field of Announce messages.ro Unsigned32 UNITS "Steps" .1.3.6.1.2.1.241.1.2.1.1.4 |
ptpbaseClockCurrentDSOffsetFromMasterThis object specifies the current clock dataset ClockOffset value. The value of the computation of the offset in time between a slave and a master clock.ro PtpClockTimeInterval UNITS "Time Interval" .1.3.6.1.2.1.241.1.2.1.1.5 |
ptpbaseClockCurrentDSMeanPathDelayThis object specifies the current clock dataset MeanPathDelay value. The mean path delay between a pair of ports as measured by the delay request-response mechanism.ro PtpClockTimeInterval UNITS "Time Interval" .1.3.6.1.2.1.241.1.2.1.1.6 |
ptpbaseClockParentDSTableTable of information about the PTP clock parentDS for all domains. SEQUENCE OF PtpbaseClockParentDSEntry .1.3.6.1.2.1.241.1.2.2 |
ptpbaseClockParentDSEntryA table entry that contains information about a single PTP clock parentDS for a domain. PtpbaseClockParentDSEntry .1.3.6.1.2.1.241.1.2.2.1 |
ptpbaseClockParentDSDomainIndexThis object specifies the domain number used to create a logical group of PTP devices. PtpClockDomainType .1.3.6.1.2.1.241.1.2.2.1.1 |
ptpbaseClockParentDSClockTypeIndexThis object specifies the clock type as defined in the textual convention description. PtpClockType .1.3.6.1.2.1.241.1.2.2.1.2 |
ptpbaseClockParentDSInstanceIndexThis object specifies the instance of the clock for this clock type in the given domain. PtpClockInstanceType .1.3.6.1.2.1.241.1.2.2.1.3 |
ptpbaseClockParentDSParentPortIdentityThis object specifies the value of portIdentity of the port on the master that issues the Sync messages used in synchronizing this clock.ro OCTET STRING .1.3.6.1.2.1.241.1.2.2.1.4 |
ptpbaseClockParentDSParentStatsThis object specifies the parentDS ParentStats value. This value indicates whether the values of ParentDSOffset and ParentDSClockPhChRate have been measured and are valid. A TRUE value shall indicate valid data.ro TruthValue (SNMPv2-TC) .1.3.6.1.2.1.241.1.2.2.1.5 |
ptpbaseClockParentDSOffsetThis object specifies the parentDS ParentOffsetScaledLogVariance value. This value is the variance of the parent clock's phase as measured by the local clock.ro PtpClockIntervalBase2 (-128..127) .1.3.6.1.2.1.241.1.2.2.1.6 |
ptpbaseClockParentDSClockPhChRateThis object specifies the clock's parentDS ParentClockPhaseChangeRate value. This value is an estimate of the parent clock's phase change rate as measured by the slave clock.ro Integer32 .1.3.6.1.2.1.241.1.2.2.1.7 |
ptpbaseClockParentDSGMClockIdentityThis object specifies the parentDS grandmaster clock identity.ro PtpClockIdentity .1.3.6.1.2.1.241.1.2.2.1.8 |
ptpbaseClockParentDSGMClockPriority1This object specifies the parentDS grandmaster clock priority1.ro Unsigned32 .1.3.6.1.2.1.241.1.2.2.1.9 |
ptpbaseClockParentDSGMClockPriority2This object specifies the parentDS grandmaster clock priority2.ro Unsigned32 .1.3.6.1.2.1.241.1.2.2.1.10 |
ptpbaseClockParentDSGMClockQualityClassThis object specifies the parentDS grandmaster clock quality class.ro PtpClockQualityClassType .1.3.6.1.2.1.241.1.2.2.1.11 |
ptpbaseClockParentDSGMClockQualityAccuracyThis object specifies the parentDS grandmaster clock quality accuracy.ro PtpClockQualityAccuracyType .1.3.6.1.2.1.241.1.2.2.1.12 |
ptpbaseClockParentDSGMClockQualityOffsetThis object specifies the parentDS grandmaster clock quality offset.ro Unsigned32 .1.3.6.1.2.1.241.1.2.2.1.13 |
ptpbaseClockDefaultDSTableTable of information about the PTP clock defaultDS for all domains. SEQUENCE OF PtpbaseClockDefaultDSEntry .1.3.6.1.2.1.241.1.2.3 |
ptpbaseClockDefaultDSEntryA table entry that contains information about a single PTP clock defaultDS for a domain. PtpbaseClockDefaultDSEntry .1.3.6.1.2.1.241.1.2.3.1 |
ptpbaseClockDefaultDSDomainIndexThis object specifies the domain number used to create a logical group of PTP devices. PtpClockDomainType .1.3.6.1.2.1.241.1.2.3.1.1 |
ptpbaseClockDefaultDSClockTypeIndexThis object specifies the clock type as defined in the textual convention description. PtpClockType .1.3.6.1.2.1.241.1.2.3.1.2 |
ptpbaseClockDefaultDSInstanceIndexThis object specifies the instance of the clock for this clock type in the given domain. PtpClockInstanceType .1.3.6.1.2.1.241.1.2.3.1.3 |
ptpbaseClockDefaultDSTwoStepFlagThis object specifies whether the two-step process is used.ro TruthValue (SNMPv2-TC) .1.3.6.1.2.1.241.1.2.3.1.4 |
ptpbaseClockDefaultDSClockIdentityThis object specifies the defaultDS clockIdentity member.ro PtpClockIdentity .1.3.6.1.2.1.241.1.2.3.1.5 |
ptpbaseClockDefaultDSPriority1This object specifies the defaultDS priority1 member.ro Unsigned32 .1.3.6.1.2.1.241.1.2.3.1.6 |
ptpbaseClockDefaultDSPriority2This object specifies the defaultDS priority2 member.ro Unsigned32 .1.3.6.1.2.1.241.1.2.3.1.7 |
ptpbaseClockDefaultDSSlaveOnlyThis object specifies whether the SlaveOnly flag is set.ro TruthValue (SNMPv2-TC) .1.3.6.1.2.1.241.1.2.3.1.8 |
ptpbaseClockDefaultDSQualityClassThis object specifies the defaultDS Quality Class.ro PtpClockQualityClassType .1.3.6.1.2.1.241.1.2.3.1.9 |
ptpbaseClockDefaultDSQualityAccuracyThis object specifies the defaultDS Quality Accuracy.ro PtpClockQualityAccuracyType .1.3.6.1.2.1.241.1.2.3.1.10 |
ptpbaseClockDefaultDSQualityOffsetThis object specifies the defaultDS Quality offset.ro Integer32 .1.3.6.1.2.1.241.1.2.3.1.11 |
ptpbaseClockRunningTableTable of information about the PTP clock running datasets for all domains. SEQUENCE OF PtpbaseClockRunningEntry .1.3.6.1.2.1.241.1.2.4 |
ptpbaseClockRunningEntryA table entry that contains information about a single PTP clock running dataset for a domain. PtpbaseClockRunningEntry .1.3.6.1.2.1.241.1.2.4.1 |
ptpbaseClockRunningDomainIndexThis object specifies the domain number used to create a logical group of PTP devices. PtpClockDomainType .1.3.6.1.2.1.241.1.2.4.1.1 |
ptpbaseClockRunningClockTypeIndexThis object specifies the clock type as defined in the textual convention description. PtpClockType .1.3.6.1.2.1.241.1.2.4.1.2 |
ptpbaseClockRunningInstanceIndexThis object specifies the instance of the clock for this clock type in the given domain. PtpClockInstanceType .1.3.6.1.2.1.241.1.2.4.1.3 |
ptpbaseClockRunningStateThis object specifies the clock state returned by a PTP engine.ro PtpClockStateType .1.3.6.1.2.1.241.1.2.4.1.4 |
ptpbaseClockRunningPacketsSentThis object specifies the total number of all unicast and multicast packets that have been sent out for this clock in this domain for this type. These counters are discontinuous.ro Counter64 .1.3.6.1.2.1.241.1.2.4.1.5 |
ptpbaseClockRunningPacketsReceivedThis object specifies the total number of all unicast and multicast packets that have been received for this clock in this domain for this type. These counters are discontinuous.ro Counter64 .1.3.6.1.2.1.241.1.2.4.1.6 |
ptpbaseClockTimePropertiesDSTableTable of information about the PTP clock timePropertiesDS for all domains. SEQUENCE OF PtpbaseClockTimePropertiesDSEntry .1.3.6.1.2.1.241.1.2.5 |
ptpbaseClockTimePropertiesDSEntryA table entry that contains information about a single PTP clock timePropertiesDS for a domain. PtpbaseClockTimePropertiesDSEntry .1.3.6.1.2.1.241.1.2.5.1 |
ptpbaseClockTimePropertiesDSDomainIndexThis object specifies the domain number used to create a logical group of PTP devices. PtpClockDomainType .1.3.6.1.2.1.241.1.2.5.1.1 |
ptpbaseClockTimePropertiesDSClockTypeIndexThis object specifies the clock type as defined in the textual convention description. PtpClockType .1.3.6.1.2.1.241.1.2.5.1.2 |
ptpbaseClockTimePropertiesDSInstanceIndexThis object specifies the instance of the clock for this clock type in the given domain. PtpClockInstanceType .1.3.6.1.2.1.241.1.2.5.1.3 |
ptpbaseClockTimePropertiesDSCurrentUTCOffsetValidThis object specifies the timePropertiesDS value of whether the current UTC offset is valid.ro TruthValue (SNMPv2-TC) .1.3.6.1.2.1.241.1.2.5.1.4 |
ptpbaseClockTimePropertiesDSCurrentUTCOffsetThis object specifies the timePropertiesDS value of the current UTC offset. In PTP systems whose epoch is the PTP epoch, the value of timePropertiesDS.currentUtcOffset is the offset between TAI and UTC; otherwise, the value has no meaning. The value shall be in units of seconds.ro Integer32 .1.3.6.1.2.1.241.1.2.5.1.5 |
ptpbaseClockTimePropertiesDSLeap59This object specifies the Leap59 value in the clock currentDS.ro TruthValue (SNMPv2-TC) .1.3.6.1.2.1.241.1.2.5.1.6 |
ptpbaseClockTimePropertiesDSLeap61This object specifies the Leap61 value in the clock currentDS.ro TruthValue (SNMPv2-TC) .1.3.6.1.2.1.241.1.2.5.1.7 |
ptpbaseClockTimePropertiesDSTimeTraceableThis object specifies the Time Traceable value in the clock currentDS.ro TruthValue (SNMPv2-TC) .1.3.6.1.2.1.241.1.2.5.1.8 |
ptpbaseClockTimePropertiesDSFreqTraceableThis object specifies the Frequency Traceable value in the clock currentDS.ro TruthValue (SNMPv2-TC) .1.3.6.1.2.1.241.1.2.5.1.9 |
ptpbaseClockTimePropertiesDSPTPTimescaleThis object specifies the PTP Timescale value in the clock currentDS.ro TruthValue (SNMPv2-TC) .1.3.6.1.2.1.241.1.2.5.1.10 |
ptpbaseClockTimePropertiesDSSourceThis object specifies the Timesource value in the clock currentDS.ro PtpClockTimeSourceType .1.3.6.1.2.1.241.1.2.5.1.11 |
ptpbaseClockTransDefaultDSTableTable of information about the PTP transparentClockDefaultDS for all domains. SEQUENCE OF PtpbaseClockTransDefaultDSEntry .1.3.6.1.2.1.241.1.2.6 |
ptpbaseClockTransDefaultDSEntryA table entry that contains information about a single PTP transparent clock defaultDS for a domain. PtpbaseClockTransDefaultDSEntry .1.3.6.1.2.1.241.1.2.6.1 |
ptpbaseClockTransDefaultDSDomainIndexThis object specifies the domain number used to create a logical group of PTP devices. PtpClockDomainType .1.3.6.1.2.1.241.1.2.6.1.1 |
ptpbaseClockTransDefaultDSInstanceIndexThis object specifies the instance of the clock for this clock type in the given domain. PtpClockInstanceType .1.3.6.1.2.1.241.1.2.6.1.2 |
ptpbaseClockTransDefaultDSClockIdentityThis object specifies the value of the clockIdentity attribute of the local clock.ro PtpClockIdentity .1.3.6.1.2.1.241.1.2.6.1.3 |
ptpbaseClockTransDefaultDSNumOfPortsThis object specifies the number of PTP ports of the device. These counters are discontinuous.ro Counter32 .1.3.6.1.2.1.241.1.2.6.1.4 |
ptpbaseClockTransDefaultDSDelayThis object, if the transparent clock is an end-to-end transparent clock, has the value of e2e; if the transparent clock is a peer-to-peer transparent clock, the value is p2p.ro PtpClockMechanismType .1.3.6.1.2.1.241.1.2.6.1.5 |
ptpbaseClockTransDefaultDSPrimaryDomainThis object specifies the value of the primary syntonization domain. The initialization value is 0.ro PtpClockDomainType .1.3.6.1.2.1.241.1.2.6.1.6 |
ptpbaseClockPortTableTable of information about the clock ports for a particular domain. SEQUENCE OF PtpbaseClockPortEntry .1.3.6.1.2.1.241.1.2.7 |
ptpbaseClockPortEntryA table entry that contains information about a single clock port. PtpbaseClockPortEntry .1.3.6.1.2.1.241.1.2.7.1 |
ptpbaseClockPortDomainIndexThis object specifies the domain number used to create a logical group of PTP devices. PtpClockDomainType .1.3.6.1.2.1.241.1.2.7.1.1 |
ptpbaseClockPortClockTypeIndexThis object specifies the clock type as defined in the textual convention description. PtpClockType .1.3.6.1.2.1.241.1.2.7.1.2 |
ptpbaseClockPortClockInstanceIndexThis object specifies the instance of the clock for this clock type in the given domain. PtpClockInstanceType .1.3.6.1.2.1.241.1.2.7.1.3 |
ptpbaseClockPortTablePortNumberIndexThis object specifies the PTP portNumber for this port. PtpClockPortNumber .1.3.6.1.2.1.241.1.2.7.1.4 |
ptpbaseClockPortNameThis object specifies the PTP clock port name configured on the node.ro DisplayString .1.3.6.1.2.1.241.1.2.7.1.5 |
ptpbaseClockPortRoleThis object describes the current role (slave/master) of the port.ro PtpClockRoleType .1.3.6.1.2.1.241.1.2.7.1.6 |
ptpbaseClockPortSyncTwoStepThis object specifies that two-step clock operation between the PTP master and slave device is enabled.ro TruthValue (SNMPv2-TC) .1.3.6.1.2.1.241.1.2.7.1.7 |
ptpbaseClockPortCurrentPeerAddressTypeThis object specifies the current peer's network address type used for PTP communication.ro AutonomousType (SNMPv2-TC) .1.3.6.1.2.1.241.1.2.7.1.8 |
ptpbaseClockPortCurrentPeerAddressThis object specifies the current peer's network address used for PTP communication.ro PtpClockPortTransportTypeAddress .1.3.6.1.2.1.241.1.2.7.1.9 |
ptpbaseClockPortNumOfAssociatedPortsThis object specifies the following: For a master port - the number of PTP slave sessions (peers) associated with this PTP port. For a slave port - the number of masters available to this slave port (might or might not be peered).ro Gauge32 .1.3.6.1.2.1.241.1.2.7.1.10 |
ptpbaseClockPortDSTableTable of information about the clock's portDS for a particular domain. SEQUENCE OF PtpbaseClockPortDSEntry .1.3.6.1.2.1.241.1.2.8 |
ptpbaseClockPortDSEntryA table entry that contains portDS information for a single clock port. PtpbaseClockPortDSEntry .1.3.6.1.2.1.241.1.2.8.1 |
ptpbaseClockPortDSDomainIndexThis object specifies the domain number used to create a logical group of PTP devices. PtpClockDomainType .1.3.6.1.2.1.241.1.2.8.1.1 |
ptpbaseClockPortDSClockTypeIndexThis object specifies the clock type as defined in the textual convention description. PtpClockType .1.3.6.1.2.1.241.1.2.8.1.2 |
ptpbaseClockPortDSClockInstanceIndexThis object specifies the instance of the clock for this clock type in the given domain. PtpClockInstanceType .1.3.6.1.2.1.241.1.2.8.1.3 |
ptpbaseClockPortDSPortNumberIndexThis object specifies the PTP portNumber associated with this PTP port. PtpClockPortNumber .1.3.6.1.2.1.241.1.2.8.1.4 |
ptpbaseClockPortDSNameThis object specifies the PTP clock portDS name.ro DisplayString .1.3.6.1.2.1.241.1.2.8.1.5 |
ptpbaseClockPortDSPortIdentityThis object specifies the PTP clock port Identity.ro OCTET STRING .1.3.6.1.2.1.241.1.2.8.1.6 |
ptpbaseClockPortDSlogAnnouncementIntervalThis object specifies the Announce message transmission interval associated with this clock port.ro PtpClockIntervalBase2 UNITS "Time Interval" .1.3.6.1.2.1.241.1.2.8.1.7 |
ptpbaseClockPortDSAnnounceRctTimeoutThis object specifies the Announce receipt timeout associated with this clock port.ro Integer32 .1.3.6.1.2.1.241.1.2.8.1.8 |
ptpbaseClockPortDSlogSyncIntervalThis object specifies the Sync message transmission interval.ro PtpClockIntervalBase2 UNITS "Time Interval" .1.3.6.1.2.1.241.1.2.8.1.9 |
ptpbaseClockPortDSMinDelayReqIntervalThis object specifies the Delay_Req message transmission interval.ro Integer32 .1.3.6.1.2.1.241.1.2.8.1.10 |
ptpbaseClockPortDSPeerDelayReqIntervalThis object specifies the Pdelay_Req message transmission interval.ro Integer32 .1.3.6.1.2.1.241.1.2.8.1.11 |
ptpbaseClockPortDSDelayMechThis object specifies the delay mechanism used. If the clock is an end-to-end clock, the value is e2e; if the clock is a peer to-peer clock, the value is p2p.ro PtpClockMechanismType .1.3.6.1.2.1.241.1.2.8.1.12 |
ptpbaseClockPortDSPeerMeanPathDelayThis object specifies the peer meanPathDelay.ro PtpClockTimeInterval UNITS "Time Interval" .1.3.6.1.2.1.241.1.2.8.1.13 |
ptpbaseClockPortDSGrantDurationThis object specifies the grant duration allocated by the master.ro Unsigned32 UNITS "seconds" .1.3.6.1.2.1.241.1.2.8.1.14 |
ptpbaseClockPortDSPTPVersionThis object specifies the PTP version being used.ro Unsigned32 .1.3.6.1.2.1.241.1.2.8.1.15 |
ptpbaseClockPortRunningTableTable of information about the clock ports running datasets for a particular domain. SEQUENCE OF PtpbaseClockPortRunningEntry .1.3.6.1.2.1.241.1.2.9 |
ptpbaseClockPortRunningEntryA table entry that contains running dataset information about a single clock port. PtpbaseClockPortRunningEntry .1.3.6.1.2.1.241.1.2.9.1 |
ptpbaseClockPortRunningDomainIndexThis object specifies the domain number used to create a logical group of PTP devices. PtpClockDomainType .1.3.6.1.2.1.241.1.2.9.1.1 |
ptpbaseClockPortRunningClockTypeIndexThis object specifies the clock type as defined in the textual convention description. PtpClockType .1.3.6.1.2.1.241.1.2.9.1.2 |
ptpbaseClockPortRunningClockInstanceIndexThis object specifies the instance of the clock for this clock type in the given domain. PtpClockInstanceType .1.3.6.1.2.1.241.1.2.9.1.3 |
ptpbaseClockPortRunningPortNumberIndexThis object specifies the PTP portNumber associated with this clock port. PtpClockPortNumber .1.3.6.1.2.1.241.1.2.9.1.4 |
ptpbaseClockPortRunningNameThis object specifies the PTP clock port name.ro DisplayString .1.3.6.1.2.1.241.1.2.9.1.5 |
ptpbaseClockPortRunningStateThis object specifies the port state returned by PTP engine: initializing faulty disabled listening preMaster master passive uncalibrated slavero PtpClockPortState .1.3.6.1.2.1.241.1.2.9.1.6 |
ptpbaseClockPortRunningRoleThis object specifies the Clock Role.ro PtpClockRoleType .1.3.6.1.2.1.241.1.2.9.1.7 |
ptpbaseClockPortRunningInterfaceIndexThis object specifies the interface on the node being used by the PTP clock for PTP communication.ro InterfaceIndexOrZero (IF-MIB) .1.3.6.1.2.1.241.1.2.9.1.8 |
ptpbaseClockPortRunningTransportThis object specifies the transport protocol being used for PTP communication (the mapping used).ro AutonomousType (SNMPv2-TC) .1.3.6.1.2.1.241.1.2.9.1.9 |
ptpbaseClockPortRunningEncapsulationTypeThis object specifies the type of encapsulation if the interface is adding extra layers (e.g., VLAN or Pseudowire encapsulation) for the PTP messages.ro AutonomousType (SNMPv2-TC) .1.3.6.1.2.1.241.1.2.9.1.10 |
ptpbaseClockPortRunningTxModeThis object specifies the clock transmission mode as: unicast: Using unicast communication channel multicast: Using multicast communication channel multicast-mix: Using multicast-unicast communication channelro PtpClockTxModeType .1.3.6.1.2.1.241.1.2.9.1.11 |
ptpbaseClockPortRunningRxModeThis object specifies the clock receive mode as: unicast: Using unicast communication channel multicast: Using multicast communication channel multicast-mix: Using multicast-unicast communication channelro PtpClockTxModeType .1.3.6.1.2.1.241.1.2.9.1.12 |
ptpbaseClockPortRunningPacketsReceivedThis object specifies the packets received on the clock port (cumulative). These counters are discontinuous.ro Counter64 UNITS "packets" .1.3.6.1.2.1.241.1.2.9.1.13 |
ptpbaseClockPortRunningPacketsSentThis object specifies the packets sent on the clock port (cumulative). These counters are discontinuous.ro Counter64 UNITS "packets" .1.3.6.1.2.1.241.1.2.9.1.14 |
ptpbaseClockPortTransDSTableTable of information about the transparentClockPortDS for a particular domain. SEQUENCE OF PtpbaseClockPortTransDSEntry .1.3.6.1.2.1.241.1.2.10 |
ptpbaseClockPortTransDSEntryA table entry that contains clock port transparent dataset information about a single clock port. PtpbaseClockPortTransDSEntry .1.3.6.1.2.1.241.1.2.10.1 |
ptpbaseClockPortTransDSDomainIndexThis object specifies the domain number used to create a logical group of PTP devices. PtpClockDomainType .1.3.6.1.2.1.241.1.2.10.1.1 |
ptpbaseClockPortTransDSInstanceIndexThis object specifies the instance of the clock for this clock type in the given domain. PtpClockInstanceType .1.3.6.1.2.1.241.1.2.10.1.2 |
ptpbaseClockPortTransDSPortNumberIndexThis object specifies the PTP portNumber associated with this port. PtpClockPortNumber .1.3.6.1.2.1.241.1.2.10.1.3 |
ptpbaseClockPortTransDSPortIdentityThis object specifies the value of the PortIdentity attribute of the local port.ro PtpClockIdentity .1.3.6.1.2.1.241.1.2.10.1.4 |
ptpbaseClockPortTransDSlogMinPdelayReqIntThis object specifies the value of the logarithm to the base 2 of the minPdelayReqInterval.ro PtpClockIntervalBase2 .1.3.6.1.2.1.241.1.2.10.1.5 |
ptpbaseClockPortTransDSFaultyFlagThis object specifies the value TRUE if the port is faulty and FALSE if the port is operating normally.ro TruthValue (SNMPv2-TC) .1.3.6.1.2.1.241.1.2.10.1.6 |
ptpbaseClockPortTransDSPeerMeanPathDelayThis object specifies, if the delayMechanism used is p2p, the value of the estimate of the current one-way propagation delay, i.e., <meanPathDelay> on the link attached to this port, computed using the peer delay mechanism. If the value of the delayMechanism used is e2e, then the value will be zero.ro PtpClockTimeInterval UNITS "Time Interval" .1.3.6.1.2.1.241.1.2.10.1.7 |
ptpbaseClockPortAssociateTableTable of information about a given port's associated ports. For a master port: multiple slave ports that have established sessions with the current master port. For a slave port: the list of masters available for a given slave port. Session information (packets, errors) to be displayed based on availability and scenario. SEQUENCE OF PtpbaseClockPortAssociateEntry .1.3.6.1.2.1.241.1.2.11 |
ptpbaseClockPortAssociateEntryA table entry that contains information about a single associated port for the given clock port. PtpbaseClockPortAssociateEntry .1.3.6.1.2.1.241.1.2.11.1 |
ptpClockPortCurrentDomainIndexThis object specifies the given port's domain number. PtpClockDomainType .1.3.6.1.2.1.241.1.2.11.1.1 |
ptpClockPortCurrentClockTypeIndexThis object specifies the given port's clock type. PtpClockType .1.3.6.1.2.1.241.1.2.11.1.2 |
ptpClockPortCurrentClockInstanceIndexThis object specifies the instance of the clock for this clock type in the given domain. PtpClockInstanceType .1.3.6.1.2.1.241.1.2.11.1.3 |
ptpClockPortCurrentPortNumberIndexThis object specifies the PTP portNumber for the given port. PtpClockPortNumber .1.3.6.1.2.1.241.1.2.11.1.4 |
ptpbaseClockPortAssociatePortIndexThis object specifies the associated port's serial number in the current port's context. Unsigned32 .1.3.6.1.2.1.241.1.2.11.1.5 |
ptpbaseClockPortAssociateAddressTypeThis object specifies the peer port's network address type used for PTP communication. The OCTET STRING representation of the OID of ptpbaseWellKnownTransportTypes will be used in the values contained in the OCTET STRING.ro AutonomousType (SNMPv2-TC) .1.3.6.1.2.1.241.1.2.11.1.6 |
ptpbaseClockPortAssociateAddressThis object specifies the peer port's network address used for PTP communication.ro PtpClockPortTransportTypeAddress .1.3.6.1.2.1.241.1.2.11.1.7 |
ptpbaseClockPortAssociatePacketsSentThe number of packets sent to this peer port from the current port. These counters are discontinuous.ro Counter64 UNITS "packets" .1.3.6.1.2.1.241.1.2.11.1.8 |
ptpbaseClockPortAssociatePacketsReceivedThe number of packets received from this peer port by the current port. These counters are discontinuous.ro Counter64 UNITS "packets" .1.3.6.1.2.1.241.1.2.11.1.9 |
ptpbaseClockPortAssociateInErrorsThis object specifies the input errors associated with the peer port. These counters are discontinuous.ro Counter64 UNITS "packets" .1.3.6.1.2.1.241.1.2.11.1.10 |
ptpbaseClockPortAssociateOutErrorsThis object specifies the output errors associated with the peer port. These counters are discontinuous.ro Counter64 UNITS "packets" .1.3.6.1.2.1.241.1.2.11.1.11 |
ptpbaseWellKnownTransportTypes OBJECT IDENTIFIER .1.3.6.1.2.1.241.1.2.12 |
ptpbaseTransportTypeIPversion4IP version 4 OBJECT IDENTIFIER .1.3.6.1.2.1.241.1.2.12.1 |
ptpbaseTransportTypeIPversion6IP version 6 OBJECT IDENTIFIER .1.3.6.1.2.1.241.1.2.12.2 |
ptpbaseTransportTypeEthernetEthernet OBJECT IDENTIFIER .1.3.6.1.2.1.241.1.2.12.3 |
ptpbaseTransportTypeDeviceNETDevice NET OBJECT IDENTIFIER .1.3.6.1.2.1.241.1.2.12.4 |
ptpbaseTransportTypeControlNETControl NET OBJECT IDENTIFIER .1.3.6.1.2.1.241.1.2.12.5 |
ptpbaseTransportTypeIEC61158IEC61158 OBJECT IDENTIFIER .1.3.6.1.2.1.241.1.2.12.6 |
ptpbaseWellKnownEncapsulationTypes OBJECT IDENTIFIER .1.3.6.1.2.1.241.1.2.13 |
ptpbaseEncapsulationTypeEthernetEthernet Encapsulation type. OBJECT IDENTIFIER .1.3.6.1.2.1.241.1.2.13.1 |
ptpbaseEncapsulationTypeVLANVLAN Encapsulation type. OBJECT IDENTIFIER .1.3.6.1.2.1.241.1.2.13.2 |
ptpbaseEncapsulationTypeUDPIPLSPUDP/IP over MPLS Encapsulation type. OBJECT IDENTIFIER .1.3.6.1.2.1.241.1.2.13.3 |
ptpbaseEncapsulationTypePWUDPIPLSPUDP/IP Pseudowire over MPLS Encapsulation type. OBJECT IDENTIFIER .1.3.6.1.2.1.241.1.2.13.4 |
ptpbaseEncapsulationTypePWEthernetLSPEthernet Pseudowire over MPLS Encapsulation type. OBJECT IDENTIFIER .1.3.6.1.2.1.241.1.2.13.5 |
ptpbaseMIBConformance OBJECT IDENTIFIER .1.3.6.1.2.1.241.2 |
ptpbaseMIBCompliances OBJECT IDENTIFIER .1.3.6.1.2.1.241.2.1 |
ptpbaseMIBCompliancesSystemInfoCompliance statement for agents that provide read-only support for PTPBASE-MIB to provide system-level information of clock devices. Such devices can only be monitored using this MIB module. The module is implemented with support for read-only. In other words, only monitoring is available by implementing this MODULE-COMPLIANCE. Unknown .1.3.6.1.2.1.241.2.1.1 |
ptpbaseMIBCompliancesClockInfoCompliance statement for agents that provide read-only support for PTPBASE-MIB to provide clock-related information. Such devices can only be monitored using this MIB module. The module is implemented with support for read-only. In other words, only monitoring is available by implementing this MODULE-COMPLIANCE. Unknown .1.3.6.1.2.1.241.2.1.2 |
ptpbaseMIBCompliancesClockPortInfoCompliance statement for agents that provide read-only support for PTPBASE-MIB to provide clock-port-related information. Such devices can only be monitored using this MIB module. The module is implemented with support for read-only. In other words, only monitoring is available by implementing this MODULE-COMPLIANCE. Unknown .1.3.6.1.2.1.241.2.1.3 |
ptpbaseMIBCompliancesTransparentClockInfoCompliance statement for agents that provide read-only support for PTPBASE-MIB to provide transparent-clock-related information. Such devices can only be monitored using this MIB module. The module is implemented with support for read-only. In other words, only monitoring is available by implementing this MODULE-COMPLIANCE. Unknown .1.3.6.1.2.1.241.2.1.4 |
ptpbaseMIBGroups OBJECT IDENTIFIER .1.3.6.1.2.1.241.2.2 |
ptpbaseMIBSystemInfoGroupGroup that aggregates objects describing system-wide information Unknown .1.3.6.1.2.1.241.2.2.1 |
ptpbaseMIBClockCurrentDSGroupGroup that aggregates objects describing PTP currentDS information Unknown .1.3.6.1.2.1.241.2.2.2 |
ptpbaseMIBClockParentDSGroupGroup that aggregates objects describing PTP parentDS information Unknown .1.3.6.1.2.1.241.2.2.3 |
ptpbaseMIBClockDefaultDSGroupGroup that aggregates objects describing PTP defaultDS information Unknown .1.3.6.1.2.1.241.2.2.4 |
ptpbaseMIBClockRunningGroupGroup that aggregates objects describing PTP running state information Unknown .1.3.6.1.2.1.241.2.2.5 |
ptpbaseMIBClockTimepropertiesGroupGroup that aggregates objects describing PTP Time Properties information Unknown .1.3.6.1.2.1.241.2.2.6 |
ptpbaseMIBClockTranparentDSGroupGroup that aggregates objects describing PTP transparentClockDefaultDS information Unknown .1.3.6.1.2.1.241.2.2.7 |
ptpbaseMIBClockPortGroupGroup that aggregates objects describing information for a given PTP Port Unknown .1.3.6.1.2.1.241.2.2.8 |
ptpbaseMIBClockPortDSGroupGroup that aggregates objects describing PTP portDS information Unknown .1.3.6.1.2.1.241.2.2.9 |
ptpbaseMIBClockPortRunningGroupGroup that aggregates objects describing PTP running interface information Unknown .1.3.6.1.2.1.241.2.2.10 |
ptpbaseMIBClockPortTransDSGroupGroup that aggregates objects describing PTP transparentClockPortDS information Unknown .1.3.6.1.2.1.241.2.2.11 |
ptpbaseMIBClockPortAssociateGroupGroup that aggregates objects describing information on peer PTP ports for a given PTP clock port Unknown .1.3.6.1.2.1.241.2.2.12 |