PRVT-RAPS-SVC-MIB
AI MIB Summary
The PRVT-RAPS-SVC-MIB module enables SNMP monitoring of G.8032 Ring Automatic Protection Switching states, specifically tracking service protection status, active ring topology, and switching event counters on carrier-grade Ethernet ring devices. It provides visibility into protection switch triggers, ring member roles, and service continuity metrics to ensure rapid fault detection and recovery in dual-ring Ethernet topologies.
The SNMP MIB module for Ring Automatic Protection Switching with Service Support (G.8032).
Main OID:
prvtRapsSvcMIB.1.3.6.1.4.1.738.1.7.6
54
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
54 total| Object Name |
|---|
prvtRapsSvcMIBThe SNMP MIB module for Ring Automatic Protection Switching with Service Support (G.8032). MODULE-IDENTITY .1.3.6.1.4.1.738.1.7.6 |
prvtRapsSvcMIBNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.738.1.7.6.0 |
prvtRapsSvcInstSubRingDefectAlarmThis trap will be sent by any subring instance when it notices a defect. So far only the situation when two or more RPL-owners are defined in the ring is identified as a defect. This scenario is noticed when the instance with the RPL-Owner role receives a RAPS packet with the RB bit set in its status field from a different NodeID than its own. The management entity receiving the notification can identify the system from the network source address of the notification, and can identify the instance reporting the change by the indices in the OID of the prvtRapsInstSubRingOperStatus variable in the notification. NOTIFICATION-TYPE .1.3.6.1.4.1.738.1.7.6.0.1 |
prvtRapsSvcInstSubRingSwitchoverAlarmThis trap will be sent by any subring instance when it changes state. The management entity receiving the notification can identify the system from the network source address of the notification, and can identify the instance reporting the change by the indices in the OID of the prvtRapsInstSubRingRapsState variable in the notification. NOTIFICATION-TYPE .1.3.6.1.4.1.738.1.7.6.0.2 |
prvtRapsSvcMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.738.1.7.6.1 |
prvtRapsSvcInstTableR-APS Instance table. Each entry in this table defines an instance of a Ring APS. SEQUENCE OF PrvtRapsSvcInstEntry .1.3.6.1.4.1.738.1.7.6.1.1 |
prvtRapsSvcInstEntryAn entry in prvtRapsSvcInstTable. PrvtRapsSvcInstEntry .1.3.6.1.4.1.738.1.7.6.1.1.1 |
prvtRapsSvcInstIndexAn arbitrary index uniquely identifying a Ring APS instance. PrvtRapsInstIndexType (PRVT-RAPS-MIB) .1.3.6.1.4.1.738.1.7.6.1.1.1.1 |
prvtRapsSvcInstRowStatusThe RowStatus for this R-APS instance.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.738.1.7.6.1.1.1.2 |
prvtRapsSvcInstCfmDomainLevelThe CFM domain level for this R-APS instance. Must perform shutdown to change this object.rw PrvtRapsCfmLevelType (PRVT-RAPS-MIB) .1.3.6.1.4.1.738.1.7.6.1.1.1.3 |
prvtRapsSvcInstDescriptionRAPS instance description.rw DisplayString .1.3.6.1.4.1.738.1.7.6.1.1.1.4 |
prvtRapsSvcInstSubRingTableR-APS Instance Sub-ring Table Each entry in this table defines a sub-ring belonging to a R-APS instance. Sub-rings are not available in version 1 mode. SEQUENCE OF PrvtRapsSvcInstSubRingEntry .1.3.6.1.4.1.738.1.7.6.1.2 |
prvtRapsSvcInstSubRingEntryAn entry in prvtRapsSvcInstSubRingTable. PrvtRapsSvcInstSubRingEntry .1.3.6.1.4.1.738.1.7.6.1.2.1 |
prvtRapsSvcInstSubRingIndexAn arbitrary index uniquely identifying a sub-ring for this R-APS instance. PrvtRapsInstIndexType (PRVT-RAPS-MIB) .1.3.6.1.4.1.738.1.7.6.1.2.1.1 |
prvtRapsSvcInstSubRingRowStatusThe RowStatus for this sub-ring.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.738.1.7.6.1.2.1.2 |
prvtRapsSvcInstSubRingIdThe ring ID for this sub-ring.rw PrvtRapsRingIdType (PRVT-RAPS-MIB) .1.3.6.1.4.1.738.1.7.6.1.2.1.3 |
prvtRapsSvcInstSubRingRoleThe role of the node inside this sub-ring. Must perform shutdown to change this object.rw PrvtRapsRoleType (PRVT-RAPS-MIB) .1.3.6.1.4.1.738.1.7.6.1.2.1.4 |
prvtRapsSvcInstSubRingVirtChanServiceConfigures the virtual channel VLAN for this sub-ring. Must be a VLAN from the prvtRapsInstMonVlanTable. No two sub-rings can use the same VLAN for the virtual channel VLAN.rw Unsigned32 .1.3.6.1.4.1.738.1.7.6.1.2.1.5 |
prvtRapsSvcInstSubRingRevertiveModeSet to 'true' to select revertive behavior for this sub-ring.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.738.1.7.6.1.2.1.6 |
prvtRapsSvcInstSubRingHoldOffTimerThe hold-off timer time-out value for this sub-ring.rw PrvtRapsHoldOffType (PRVT-RAPS-MIB) .1.3.6.1.4.1.738.1.7.6.1.2.1.7 |
prvtRapsSvcInstSubRingWaitTimerThe wait-to-restore timer time-out value for this sub-ring.rw PrvtRapsWaitTimerType (PRVT-RAPS-MIB) .1.3.6.1.4.1.738.1.7.6.1.2.1.8 |
prvtRapsSvcInstSubRingGuardTimerThe guard timer time-out value for this sub-ring.rw PrvtRapsGuardTimerType (PRVT-RAPS-MIB) .1.3.6.1.4.1.738.1.7.6.1.2.1.9 |
prvtRapsSvcInstSubRingBlockTimerThe wait to block timer time-out value for this sub-ring.ro PrvtRapsBlockTimerType (PRVT-RAPS-MIB) .1.3.6.1.4.1.738.1.7.6.1.2.1.10 |
prvtRapsSvcInstSubRingPropTopChngSet to 'true' to enable topology change propagation for this sub-ring.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.738.1.7.6.1.2.1.11 |
prvtRapsSvcInstSubRingShutdownSet to 'true' to de-activate this sub-ring.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.738.1.7.6.1.2.1.12 |
prvtRapsSvcInstSubRingClearSend the Clear command to this sub-ring.rw PrvtRapsActionType (PRVT-RAPS-MIB) .1.3.6.1.4.1.738.1.7.6.1.2.1.13 |
prvtRapsSvcInstSubRingManualSwitchSend the Manual Switch command to this sub-ring.rw PrvtRapsActionType (PRVT-RAPS-MIB) .1.3.6.1.4.1.738.1.7.6.1.2.1.14 |
prvtRapsSvcInstSubRingForcedSwitchSend the Forced Switch command to this sub-ring.rw PrvtRapsActionType (PRVT-RAPS-MIB) .1.3.6.1.4.1.738.1.7.6.1.2.1.15 |
prvtRapsSvcInstSubRingOperStatusThe operational status of this sub-ring.ro PrvtRapsInstStatusType (PRVT-RAPS-MIB) .1.3.6.1.4.1.738.1.7.6.1.2.1.16 |
prvtRapsSvcInstSubRingRapsStateThe current state of this sub-ring.ro PrvtRapsStatesType (PRVT-RAPS-MIB) .1.3.6.1.4.1.738.1.7.6.1.2.1.17 |
prvtRapsSvcInstSubRingTopPriCmdThe received Top Priority Request and Status value for this sub-ring.ro PrvtRapsTopPriCmdType (PRVT-RAPS-MIB) .1.3.6.1.4.1.738.1.7.6.1.2.1.18 |
prvtRapsSvcInstSubRingPortNameThe textual name of the port belonging to this sub-ring. For a physical port, the format is U/S/P. For a LAG interface, the format is agX.ro OCTET STRING .1.3.6.1.4.1.738.1.7.6.1.2.1.19 |
prvtRapsSvcInstSubRingLinkStatusThe operational status of the port belonging to this sub-ring.ro PrvtRapsLinkOperStatusType (PRVT-RAPS-MIB) .1.3.6.1.4.1.738.1.7.6.1.2.1.20 |
prvtRapsSvcInstSubRingRcvdNodeIdThe MAC address of the remote R-APS device connected to the port belonging to this sub-ring.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.738.1.7.6.1.2.1.21 |
prvtRapsSvcInstSubRingRcvdCmdThe command received on the port belonging to this sub-ring.ro PrvtRapsReceivedCommandType (PRVT-RAPS-MIB) .1.3.6.1.4.1.738.1.7.6.1.2.1.22 |
prvtRapsSvcInstSubRingRcvdInfoThe info received on the port belonging to this sub-ring.ro PrvtRapsReceivedInfoType (PRVT-RAPS-MIB) .1.3.6.1.4.1.738.1.7.6.1.2.1.23 |
prvtRapsSvcInstSubRingDescriptionRAPS instance sub-ring description.rw DisplayString .1.3.6.1.4.1.738.1.7.6.1.2.1.24 |
prvtRapsSvcInstSubRingVcRcvdNodeIdThe MAC address of the remote R-APS device connected through the virtual channel.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.738.1.7.6.1.2.1.25 |
prvtRapsSvcInstSubRingVcRcvdCmdThe command received through the virtual channel belonging to this sub-ring.ro PrvtRapsReceivedCommandType (PRVT-RAPS-MIB) .1.3.6.1.4.1.738.1.7.6.1.2.1.26 |
prvtRapsSvcInstSubRingVcRcvdInfoThe info received through the virtual channel belonging to this sub-ring.ro PrvtRapsReceivedInfoType (PRVT-RAPS-MIB) .1.3.6.1.4.1.738.1.7.6.1.2.1.27 |
prvtRapsSvcInstSubRingControlVlanThe control VLAN for this R-APS sub-ring instance. This object must be set to the ID of an existing VLAN. Each R-APS sub-ring instance must use a unique VLAN for the control VLAN. Must perform shutdown to change this object.rw PrvtRapsVlanIdType (PRVT-RAPS-MIB) .1.3.6.1.4.1.738.1.7.6.1.2.1.28 |
prvtRapsSvcInstSubRingPortTableR-APS Instance Sub-ring port Table An entry in this table defines a physical port belonging to a sub-ring. Exactly one interface must be defined per sub-ring. This includes physical ports (defined in prvtRapsInstSubRingPortTable) and LAG interfaces (defined in prvtRapsInstSubRingLagTable). A sub-ring port can not be part of the main ring. SEQUENCE OF PrvtRapsSvcInstSubRingPortEntry .1.3.6.1.4.1.738.1.7.6.1.3 |
prvtRapsSvcInstSubRingPortEntryAn entry in prvtRapsInstSubRingPortTable. PrvtRapsSvcInstSubRingPortEntry .1.3.6.1.4.1.738.1.7.6.1.3.1 |
prvtRapsSvcInstSubRingPortRowStatusThe RowStatus for this sub-ring port.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.738.1.7.6.1.3.1.1 |
prvtRapsSvcInstSubRingPortMepThe peer maintenance entity group end point ID that should monitor this sub-ring port. A sub-ring MEP can not be used in another ring.rw PrvtRapsMepIdType (PRVT-RAPS-MIB) .1.3.6.1.4.1.738.1.7.6.1.3.1.2 |
prvtRapsSvcInstSubRingPortRplSet to 'true' to define this sub-ring port as a Ring Protection Link port. Exactly one RPL port must be defined when sub-ring role (prvtRapsInstSubRingRole) is not 'simpleNode'. In 'simpleNode' role, no RPL ports must be defined.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.738.1.7.6.1.3.1.3 |
prvtRapsSvcInstSubRingPortMonitoringMethodEthernet ring protection monitoring methodsrw PrvtRapsMonitoringMethodType (PRVT-RAPS-MIB) .1.3.6.1.4.1.738.1.7.6.1.3.1.4 |
prvtRapsSvcInstSubRingLagTableR-APS Instance Sub-ring LAG interface Table An entry in this table defines a LAG interface belonging to a sub-ring. Exactly one interface must be defined per sub-ring. This includes physical ports (defined in prvtRapsInstSubRingPortTable) and LAG interfaces (defined in prvtRapsInstSubRingLagTable). SEQUENCE OF PrvtRapsSvcInstSubRingLagEntry .1.3.6.1.4.1.738.1.7.6.1.4 |
prvtRapsSvcInstSubRingLagEntryAn entry in prvtRapsInstSubRingLagTable. PrvtRapsSvcInstSubRingLagEntry .1.3.6.1.4.1.738.1.7.6.1.4.1 |
prvtRapsSvcInstSubRingLagIdUniquely identifies a LAG interface belonging to a sub-ring. Must be set to the LAG ID of an existing LAG interface. A sub-ring LAG port can not be part of the main ring. PrvtRapsLinkAggIdType (PRVT-RAPS-MIB) .1.3.6.1.4.1.738.1.7.6.1.4.1.1 |
prvtRapsSvcInstSubRingLagRowStatusThe RowStatus for this sub-ring LAG interface.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.738.1.7.6.1.4.1.2 |
prvtRapsSvcInstSubRingLagMepThe peer maintenance entity group end point ID that should monitor this sub-ring LAG interface. A sub-ring MEP can not be used in another ring.rw PrvtRapsMepIdType (PRVT-RAPS-MIB) .1.3.6.1.4.1.738.1.7.6.1.4.1.3 |
prvtRapsSvcInstSubRingLagRplSet to 'true' to define this sub-ring LAG port as a Ring Protection Link port. Exactly one RPL port must be defined when sub-ring role (prvtRapsInstSubRingRole) is not 'simpleNode'. In 'simpleNode' role, no RPL ports must be defined.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.738.1.7.6.1.4.1.4 |
prvtRapsSvcInstSubRingLagMonitoringMethodEthernet ring protection monitoring methodsrw PrvtRapsMonitoringMethodType (PRVT-RAPS-MIB) .1.3.6.1.4.1.738.1.7.6.1.4.1.5 |