PRVT-RAPS-MIB
AI MIB Summary
The PRVT-RAPS-MIB module provides SNMP visibility into Ring Automatic Protection Switching (G.8032) state machines, enabling monitoring of protection group status, active/standby port roles, and fault detection timers on Ethernet ring topologies.
The SNMP MIB module for Ring Automatic Protection Switching (G.8032).
Main OID:
prvtRapsMIB.1.3.6.1.4.1.738.1.7.4
104
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
104 total| Object Name |
|---|
prvtRapsMIBThe SNMP MIB module for Ring Automatic Protection Switching (G.8032). MODULE-IDENTITY .1.3.6.1.4.1.738.1.7.4 |
prvtRapsMIBNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.738.1.7.4.0 |
prvtRapsDefectAlarmThis trap will be sent by any instance when it notices a defect. So far only the situation when two or more RPL-owners are defined in the ring is identified as a defect. This scenario is noticed when the instance with the RPL-Owner role receives a RAPS packet with the RB bit set in its status field from a different NodeID than its own. The management entity receiving the notification can identify the system from the network source address of the notification. NOTIFICATION-TYPE .1.3.6.1.4.1.738.1.7.4.0.1 |
prvtRapsSwitchoverAlarmThis trap will be sent by any instance when it changes state. The management entity receiving the notification can identify the system from the network source address of the notification NOTIFICATION-TYPE .1.3.6.1.4.1.738.1.7.4.0.2 |
prvtRapsInstSubRingDefectAlarmThis trap will be sent by any subring instance when it notices a defect. So far only the situation when two or more RPL-owners are defined in the ring is identified as a defect. This scenario is noticed when the instance with the RPL-Owner role receives a RAPS packet with the RB bit set in its status field from a different NodeID than its own. The management entity receiving the notification can identify the system from the network source address of the notification, and can identify the instance reporting the change by the indices in the OID of the prvtRapsInstSubRingOperStatus variable in the notification. NOTIFICATION-TYPE .1.3.6.1.4.1.738.1.7.4.0.3 |
prvtRapsInstSubRingSwitchoverAlarmThis trap will be sent by any subring instance when it changes state. The management entity receiving the notification can identify the system from the network source address of the notification, and can identify the instance reporting the change by the indices in the OID of the prvtRapsInstSubRingRapsState variable in the notification. NOTIFICATION-TYPE .1.3.6.1.4.1.738.1.7.4.0.4 |
prvtRapsMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.738.1.7.4.1 |
prvtRapsInstTableR-APS Instance table. Each entry in this table defines an instance of a Ring APS. SEQUENCE OF PrvtRapsInstEntry .1.3.6.1.4.1.738.1.7.4.1.1 |
prvtRapsInstEntryAn entry in prvtRapsInstTable. PrvtRapsInstEntry .1.3.6.1.4.1.738.1.7.4.1.1.1 |
prvtRapsInstIndexAn arbitrary index uniquely identifying a Ring APS instance. PrvtRapsInstIndexType .1.3.6.1.4.1.738.1.7.4.1.1.1.1 |
prvtRapsInstRowStatusThe RowStatus for this R-APS instance.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.738.1.7.4.1.1.1.2 |
prvtRapsInstModeThe G.8032 mode for this R-APS instance. Only applicable when main ring's control protocol is raps (prvtRapsInstControlProtocol equals 'raps'). In version 1 mode (prvtRapsInstMode equals 'version1'), ring ID (prvtRapsInstRingId) must be 1.rw PrvtRapsModeType .1.3.6.1.4.1.738.1.7.4.1.1.1.3 |
prvtRapsInstRingIdThe Ring ID for this R-APS instance. Only applicable when main ring's control protocol is raps (prvtRapsInstControlProtocol equals 'raps'). In version 1 mode (prvtRapsInstMode equals 'version1'), ring ID (prvtRapsInstRingId) must be 1.rw PrvtRapsRingIdType .1.3.6.1.4.1.738.1.7.4.1.1.1.4 |
prvtRapsInstRoleThe role of the node for this R-APS instance. Must perform shutdown to change this object.rw PrvtRapsRoleType .1.3.6.1.4.1.738.1.7.4.1.1.1.5 |
prvtRapsInstControlVlanThe control VLAN for this R-APS instance. When main ring's control protocol is vpls (prvtRapsInstControlProtocol equals 'vpls'), this should be set equal to the ring's instance ID (prvtRapsInstIndex). This object must be set to the ID of an existing VLAN. Each R-APS instance must use a unique VLAN for the control VLAN. Must perform shutdown to change this object.rw PrvtRapsVlanIdType .1.3.6.1.4.1.738.1.7.4.1.1.1.6 |
prvtRapsInstCfmDomainLevelThe CFM domain level for this R-APS instance. Must perform shutdown to change this object.rw PrvtRapsCfmLevelType .1.3.6.1.4.1.738.1.7.4.1.1.1.7 |
prvtRapsInstRevertiveModeSet to 'true' to select revertive behavior for this R-APS instance. Only applicable when main ring's control protocol is raps (prvtRapsInstControlProtocol equals 'raps'). Non-revertive behavior is not available in version 1 mode.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.738.1.7.4.1.1.1.8 |
prvtRapsInstDisableVirtChanSet to 'true' to select that the node is part of a sub-ring without a RAPS virtual channel. Only applicable when main ring's control protocol is raps (prvtRapsInstControlProtocol equals 'raps'). Must be set 'false' when in version 1 mode.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.738.1.7.4.1.1.1.9 |
prvtRapsInstHoldOffTimerThe hold-off timer time-out value for this R-APS instance. Only applicable when main ring's control protocol is raps (prvtRapsInstControlProtocol equals 'raps').rw PrvtRapsHoldOffType .1.3.6.1.4.1.738.1.7.4.1.1.1.10 |
prvtRapsInstWaitToRestoreTimerThe wait-to-restore timer time-out value for this R-APS instance. Only applicable when main ring's control protocol is raps (prvtRapsInstControlProtocol equals 'raps').rw PrvtRapsWaitTimerType .1.3.6.1.4.1.738.1.7.4.1.1.1.11 |
prvtRapsInstGuardTimerThe guard timer time-out value for this R-APS instance. Only applicable when main ring's control protocol is raps (prvtRapsInstControlProtocol equals 'raps').rw PrvtRapsGuardTimerType .1.3.6.1.4.1.738.1.7.4.1.1.1.12 |
prvtRapsInstWaitToBlockTimerThe wait to block timer time-out value for this sub-ring.ro PrvtRapsBlockTimerType .1.3.6.1.4.1.738.1.7.4.1.1.1.13 |
prvtRapsInstShutdownSet to 'true' to de-activate this R-APS instance.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.738.1.7.4.1.1.1.14 |
prvtRapsInstClearSends the Clear command to this R-APS instance.rw PrvtRapsActionType .1.3.6.1.4.1.738.1.7.4.1.1.1.15 |
prvtRapsInstOperStatusThe operational status of this R-APS instance.ro PrvtRapsInstStatusType .1.3.6.1.4.1.738.1.7.4.1.1.1.16 |
prvtRapsInstRapsStateThe current state for this R-APS instance.ro PrvtRapsStatesType .1.3.6.1.4.1.738.1.7.4.1.1.1.17 |
prvtRapsInstTopPriCmdThe received Top Priority Request and Status value for this R-APS instance.ro PrvtRapsTopPriCmdType .1.3.6.1.4.1.738.1.7.4.1.1.1.18 |
prvtRapsInstDescriptionRAPS instance description.rw DisplayString .1.3.6.1.4.1.738.1.7.4.1.1.1.19 |
prvtRapsInstControlProtocolThe protocol that controls the main ring.rw Enumeration .1.3.6.1.4.1.738.1.7.4.1.1.1.20 |
prvtRapsInstMonVlanTableMonitor VLAN Table Each entry in this table defines a VLAN that will be monitored. Only applicable when main ring's control protocol is raps (prvtRapsInstControlProtocol equals 'raps'). SEQUENCE OF PrvtRapsInstMonVlanEntry .1.3.6.1.4.1.738.1.7.4.1.2 |
prvtRapsInstMonVlanEntryAn entry in prvtRapsInstMonVlanTable. PrvtRapsInstMonVlanEntry .1.3.6.1.4.1.738.1.7.4.1.2.1 |
prvtRapsInstMonVlanIdUniquely identifies a VLAN to be monitored. This object must be the ID of an existing VLAN. Must not be the same VLAN as the control VLAN (prvtRapsInstControlVlan). PrvtRapsVlanIdType .1.3.6.1.4.1.738.1.7.4.1.2.1.1 |
prvtRapsInstMonVlanRowStatusThe RowStatus for this monitored VLAN.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.738.1.7.4.1.2.1.2 |
prvtRapsInstRingPortTableR-APS Instance Ring Port Table. Each entry in this table defines a port belonging to a R-APS instance. Only applicable when main ring's control protocol is raps (prvtRapsInstControlProtocol equals 'raps'). Exactly two interfaces must be defined per instance. This includes physical ports (defined in prvtRapsInstRingPortTable) and LAG interfaces (defined in prvtRapsInstRingLagTable). In the case when one physical port and one LAG interface is used, the two port index values must be unique (i.e. prvtRapsInstRingPortIndex must not equal prvtRapsInstRingLagIndex) SEQUENCE OF PrvtRapsInstRingPortEntry .1.3.6.1.4.1.738.1.7.4.1.3 |
prvtRapsInstRingPortEntryAn entry in prvtRapsInstRingPortTable. PrvtRapsInstRingPortEntry .1.3.6.1.4.1.738.1.7.4.1.3.1 |
prvtRapsInstRingPortIndexAn arbitrary index uniquely identifying a physical port belonging to a R-APS instance. When a physical port and a LAG port are used in the same R-APS instance, the two ports must use unique index values (i.e. prvtRapsInstRingPortIndex must not equal prvtRapsInstRingLagIndex). Unsigned32 .1.3.6.1.4.1.738.1.7.4.1.3.1.1 |
prvtRapsInstRingPortRowStatusThe RowStatus for this ring port.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.738.1.7.4.1.3.1.2 |
prvtRapsInstRingPortIfIndexThe ifIndex of the physical port assigned to this ring port. No two ports within the same ring instance can use the same physical port.rw InterfaceIndex (IF-MIB) .1.3.6.1.4.1.738.1.7.4.1.3.1.3 |
prvtRapsInstRingPortMepThe peer maintenance entity group end point ID that should monitor this ring port. No two ports within the same ring instance can use the same MEP ID.rw PrvtRapsMepIdType .1.3.6.1.4.1.738.1.7.4.1.3.1.4 |
prvtRapsInstRingPortRplSet to 'true' to define this ring port as a Ring Protection Link port. Exactly one RPL port must be defined when ring role (prvtRapsInstRole) is not 'simpleNode'. In 'simpleNode' role, no RPL ports must be defined.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.738.1.7.4.1.3.1.5 |
prvtRapsInstRingPortManSwitchSend the Manual Switch command to this ring port.rw PrvtRapsActionType .1.3.6.1.4.1.738.1.7.4.1.3.1.6 |
prvtRapsInstRingPortForcedSwitchSend the Forced Switch command to this ring port.rw PrvtRapsActionType .1.3.6.1.4.1.738.1.7.4.1.3.1.7 |
prvtRapsInstRingPortMonitoringMethodEthernet ring protection monitoring methodsrw PrvtRapsMonitoringMethodType .1.3.6.1.4.1.738.1.7.4.1.3.1.8 |
prvtRapsInstRingLagTableR-APS Instance Ring LAG Table Each entry in this table defines a Link Aggregation Group interface belonging to a R-APS instance. Only applicable when main ring's control protocol is raps (prvtRapsInstControlProtocol equals 'raps'). Exactly two interfaces must be defined per instance. This includes physical ports (defined in prvtRapsInstRingPortTable) and LAG interfaces (defined in prvtRapsInstRingLagTable). SEQUENCE OF PrvtRapsInstRingLagEntry .1.3.6.1.4.1.738.1.7.4.1.4 |
prvtRapsInstRingLagEntryAn entry in prvtRapsInstRingLagTable. PrvtRapsInstRingLagEntry .1.3.6.1.4.1.738.1.7.4.1.4.1 |
prvtRapsInstRingLagIndexAn arbitrary index uniquely identifying a LAG interface belonging to a R-APS instance. When a physical port and a LAG port are used in the same R-APS instance, the two ports must use unique index values (i.e. prvtRapsInstRingPortIndex must not equal prvtRapsInstRingLagIndex). Unsigned32 .1.3.6.1.4.1.738.1.7.4.1.4.1.1 |
prvtRapsInstRingLagRowStatusThe RowStatus for this LAG interface.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.738.1.7.4.1.4.1.2 |
prvtRapsInstRingLagIdThe ID of a LAG interface belonging to a R-APS instance. This object must be set to the ID of an existing LAG interface. No two LAG ports within the same ring instance can use the same LAG port.rw PrvtRapsLinkAggIdType .1.3.6.1.4.1.738.1.7.4.1.4.1.3 |
prvtRapsInstRingLagMepThe peer maintenance entity group end point ID that should monitor this LAG interface. No two LAG ports within the same ring instance can use the same MEP ID.rw PrvtRapsMepIdType .1.3.6.1.4.1.738.1.7.4.1.4.1.4 |
prvtRapsInstRingLagRplSet to 'true' to define this ring LAG port as a Ring Protection Link port. Exactly one RPL port must be defined when ring role (prvtRapsInstRole) is not 'simpleNode'. In 'simpleNode' role, no RPL ports must be defined.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.738.1.7.4.1.4.1.5 |
prvtRapsInstRingLagManSwitchSend the Manual Switch command to this LAG interface.rw PrvtRapsActionType .1.3.6.1.4.1.738.1.7.4.1.4.1.6 |
prvtRapsInstRingLagForcedSwitchSend the Forced Switch command to this LAG interface.rw PrvtRapsActionType .1.3.6.1.4.1.738.1.7.4.1.4.1.7 |
prvtRapsInstPortStatusTableR-APS Instance Port Status Table Each entry in this table gives status information concerning a particular port (physical port or LAG interface port) belonging to a R-APS instance. SEQUENCE OF PrvtRapsInstPortStatusEntry .1.3.6.1.4.1.738.1.7.4.1.5 |
prvtRapsInstPortStatusEntryAn entry in prvtRapsInstPortStatusTable. PrvtRapsInstPortStatusEntry .1.3.6.1.4.1.738.1.7.4.1.5.1 |
prvtRapsInstPortStatusIfIndexUniquely identifies a physical port (ifIndex) or a LAG port (LAG ID) belonging to a R-APS instance. PrvtRapsIfIndexOrAgIdType .1.3.6.1.4.1.738.1.7.4.1.5.1.1 |
prvtRapsInstPortStatusLinkThe operational status of this port.ro PrvtRapsLinkOperStatusType .1.3.6.1.4.1.738.1.7.4.1.5.1.2 |
prvtRapsInstPortStatusRemoteMepThe maintenance entity group end point ID for the remote port connected to this port.ro PrvtRapsMepIdType .1.3.6.1.4.1.738.1.7.4.1.5.1.3 |
prvtRapsInstPortStatusRcvdNodeIdThe MAC address of the remote R-APS device connected to this port.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.738.1.7.4.1.5.1.4 |
prvtRapsInstPortStatusRcvdCmdThe command received on this port.ro PrvtRapsReceivedCommandType .1.3.6.1.4.1.738.1.7.4.1.5.1.5 |
prvtRapsInstPortStatusRcvdInfoThe info received on this port.ro PrvtRapsReceivedInfoType .1.3.6.1.4.1.738.1.7.4.1.5.1.6 |
prvtRapsInstSubRingTableR-APS Instance Sub-ring Table Each entry in this table defines a sub-ring belonging to a R-APS instance. Sub-rings are not available in version 1 mode. SEQUENCE OF PrvtRapsInstSubRingEntry .1.3.6.1.4.1.738.1.7.4.1.6 |
prvtRapsInstSubRingEntryAn entry in prvtRapsInstSubRingTable. PrvtRapsInstSubRingEntry .1.3.6.1.4.1.738.1.7.4.1.6.1 |
prvtRapsInstSubRingIndexAn arbitrary index uniquely identifying a sub-ring for this R-APS instance. PrvtRapsInstIndexType .1.3.6.1.4.1.738.1.7.4.1.6.1.1 |
prvtRapsInstSubRingRowStatusThe RowStatus for this sub-ring.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.738.1.7.4.1.6.1.2 |
prvtRapsInstSubRingIdThe ring ID for this sub-ring.rw PrvtRapsRingIdType .1.3.6.1.4.1.738.1.7.4.1.6.1.3 |
prvtRapsInstSubRingRoleThe role of the node inside this sub-ring. Must perform shutdown to change this object.rw PrvtRapsRoleType .1.3.6.1.4.1.738.1.7.4.1.6.1.4 |
prvtRapsInstSubRingVirtChanVlanConfigures the virtual channel VLAN for this sub-ring. Only applicable when main ring's control protocol is raps (prvtRapsInstControlProtocol equals 'raps'). Must be a VLAN from the prvtRapsInstMonVlanTable. No two sub-rings can use the same VLAN for the virtual channel VLAN.rw PrvtRapsVlanIdType .1.3.6.1.4.1.738.1.7.4.1.6.1.5 |
prvtRapsInstSubRingRevertiveModeSet to 'true' to select revertive behavior for this sub-ring.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.738.1.7.4.1.6.1.6 |
prvtRapsInstSubRingHoldOffTimerThe hold-off timer time-out value for this sub-ring.rw PrvtRapsHoldOffType .1.3.6.1.4.1.738.1.7.4.1.6.1.7 |
prvtRapsInstSubRingWaitTimerThe wait-to-restore timer time-out value for this sub-ring.rw PrvtRapsWaitTimerType .1.3.6.1.4.1.738.1.7.4.1.6.1.8 |
prvtRapsInstSubRingGuardTimerThe guard timer time-out value for this sub-ring.rw PrvtRapsGuardTimerType .1.3.6.1.4.1.738.1.7.4.1.6.1.9 |
prvtRapsInstSubRingBlockTimerThe wait to block timer time-out value for this sub-ring.ro PrvtRapsBlockTimerType .1.3.6.1.4.1.738.1.7.4.1.6.1.10 |
prvtRapsInstSubRingPropTopChngSet to 'true' to enable topology change propagation for this sub-ring.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.738.1.7.4.1.6.1.11 |
prvtRapsInstSubRingShutdownSet to 'true' to de-activate this sub-ring.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.738.1.7.4.1.6.1.12 |
prvtRapsInstSubRingClearSend the Clear command to this sub-ring.rw PrvtRapsActionType .1.3.6.1.4.1.738.1.7.4.1.6.1.13 |
prvtRapsInstSubRingManualSwitchSend the Manual Switch command to this sub-ring.rw PrvtRapsActionType .1.3.6.1.4.1.738.1.7.4.1.6.1.14 |
prvtRapsInstSubRingForcedSwitchSend the Forced Switch command to this sub-ring.rw PrvtRapsActionType .1.3.6.1.4.1.738.1.7.4.1.6.1.15 |
prvtRapsInstSubRingOperStatusThe operational status of this sub-ring.ro PrvtRapsInstStatusType .1.3.6.1.4.1.738.1.7.4.1.6.1.16 |
prvtRapsInstSubRingRapsStateThe current state of this sub-ring.ro PrvtRapsStatesType .1.3.6.1.4.1.738.1.7.4.1.6.1.17 |
prvtRapsInstSubRingTopPriCmdThe received Top Priority Request and Status value for this sub-ring.ro PrvtRapsTopPriCmdType .1.3.6.1.4.1.738.1.7.4.1.6.1.18 |
prvtRapsInstSubRingPortNameThe textual name of the port belonging to this sub-ring. For a physical port, the format is U/S/P. For a LAG interface, the format is agX.ro OCTET STRING .1.3.6.1.4.1.738.1.7.4.1.6.1.19 |
prvtRapsInstSubRingLinkStatusThe operational status of the port belonging to this sub-ring.ro PrvtRapsLinkOperStatusType .1.3.6.1.4.1.738.1.7.4.1.6.1.20 |
prvtRapsInstSubRingRcvdNodeIdThe MAC address of the remote R-APS device connected to the port belonging to this sub-ring.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.738.1.7.4.1.6.1.21 |
prvtRapsInstSubRingRcvdCmdThe command received on the port belonging to this sub-ring.ro PrvtRapsReceivedCommandType .1.3.6.1.4.1.738.1.7.4.1.6.1.22 |
prvtRapsInstSubRingRcvdInfoThe info received on the port belonging to this sub-ring.ro PrvtRapsReceivedInfoType .1.3.6.1.4.1.738.1.7.4.1.6.1.23 |
prvtRapsInstSubRingDescriptionRAPS instance sub-ring description.rw DisplayString .1.3.6.1.4.1.738.1.7.4.1.6.1.24 |
prvtRapsInstSubRingVcRcvdNodeIdThe MAC address of the remote R-APS device connected through the virtual channel.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.738.1.7.4.1.6.1.25 |
prvtRapsInstSubRingVcRcvdCmdThe command received through the virtual channel belonging to this sub-ring.ro PrvtRapsReceivedCommandType .1.3.6.1.4.1.738.1.7.4.1.6.1.26 |
prvtRapsInstSubRingVcRcvdInfoThe info received through the virtual channel belonging to this sub-ring.ro PrvtRapsReceivedInfoType .1.3.6.1.4.1.738.1.7.4.1.6.1.27 |
prvtRapsInstSubRingVirtChanSvcConfigure the virtual channel service for this sub-ring. Only applicable when main ring's control protocol is vpls (prvtRapsInstControlProtocol equals 'vpls'). Must be a service ID from PRVT-SERV-MIB::serviceId. No two sub-rings can use the same service ID for the virtual channel service.rw Unsigned32 .1.3.6.1.4.1.738.1.7.4.1.6.1.28 |
prvtRapsInstSubRingControlVlanThe control VLAN for this sub-ring. This object must be set to the ID of an existing VLAN. Must not be the same VLAN as a monitored VLAN in any instance. Must perform shutdown to change this object.rw PrvtRapsVlanIdType .1.3.6.1.4.1.738.1.7.4.1.6.1.29 |
prvtRapsInstSubRingPortTableR-APS Instance Sub-ring port Table An entry in this table defines a physical port belonging to a sub-ring. Exactly one interface must be defined per sub-ring. This includes physical ports (defined in prvtRapsInstSubRingPortTable) and LAG interfaces (defined in prvtRapsInstSubRingLagTable). A sub-ring port can not be part of the main ring. SEQUENCE OF PrvtRapsInstSubRingPortEntry .1.3.6.1.4.1.738.1.7.4.1.7 |
prvtRapsInstSubRingPortEntryAn entry in prvtRapsInstSubRingPortTable. PrvtRapsInstSubRingPortEntry .1.3.6.1.4.1.738.1.7.4.1.7.1 |
prvtRapsInstSubRingPortRowStatusThe RowStatus for this sub-ring port.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.738.1.7.4.1.7.1.1 |
prvtRapsInstSubRingPortMepThe peer maintenance entity group end point ID that should monitor this sub-ring port. A sub-ring MEP can not be used in another ring.rw PrvtRapsMepIdType .1.3.6.1.4.1.738.1.7.4.1.7.1.2 |
prvtRapsInstSubRingPortRplSet to 'true' to define this sub-ring port as a Ring Protection Link port. Exactly one RPL port must be defined when sub-ring role (prvtRapsInstSubRingRole) is not 'simpleNode'. In 'simpleNode' role, no RPL ports must be defined.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.738.1.7.4.1.7.1.3 |
prvtRapsInstSubRingPortMonitoringMethodEthernet ring protection monitoring methodsrw PrvtRapsMonitoringMethodType .1.3.6.1.4.1.738.1.7.4.1.7.1.4 |
prvtRapsInstSubRingLagTableR-APS Instance Sub-ring LAG interface Table An entry in this table defines a LAG interface belonging to a sub-ring. Exactly one interface must be defined per sub-ring. This includes physical ports (defined in prvtRapsInstSubRingPortTable) and LAG interfaces (defined in prvtRapsInstSubRingLagTable). SEQUENCE OF PrvtRapsInstSubRingLagEntry .1.3.6.1.4.1.738.1.7.4.1.8 |
prvtRapsInstSubRingLagEntryAn entry in prvtRapsInstSubRingLagTable. PrvtRapsInstSubRingLagEntry .1.3.6.1.4.1.738.1.7.4.1.8.1 |
prvtRapsInstSubRingLagIdUniquely identifies a LAG interface belonging to a sub-ring. Must be set to the LAG ID of an existing LAG interface. A sub-ring LAG port can not be part of the main ring. PrvtRapsLinkAggIdType .1.3.6.1.4.1.738.1.7.4.1.8.1.1 |
prvtRapsInstSubRingLagRowStatusThe RowStatus for this sub-ring LAG interface.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.738.1.7.4.1.8.1.2 |
prvtRapsInstSubRingLagMepThe peer maintenance entity group end point ID that should monitor this sub-ring LAG interface. A sub-ring MEP can not be used in another ring.rw PrvtRapsMepIdType .1.3.6.1.4.1.738.1.7.4.1.8.1.3 |
prvtRapsInstSubRingLagRplSet to 'true' to define this sub-ring LAG port as a Ring Protection Link port. Exactly one RPL port must be defined when sub-ring role (prvtRapsInstSubRingRole) is not 'simpleNode'. In 'simpleNode' role, no RPL ports must be defined.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.738.1.7.4.1.8.1.4 |
prvtRapsInstSubRingLagMonitoringMethodEthernet ring protection monitoring methodsrw PrvtRapsMonitoringMethodType .1.3.6.1.4.1.738.1.7.4.1.8.1.5 |
More MIBs from BATM Advanced Communication
Browse all BATM Advanced CommunicationMIBs →PRVT-QOS-MIB
SNMP MIB module
376 objects→
PRVT-HQOS-MIB
The PRVT-HQOS-MIB provides vendor-specific SNMP access to configure and monitor hierarchical Quality of Service (HQoS) parameters, including traffic class definitions, queue scheduling policies, and bandwidth allocation limits on network devices. This module enables granular control over packet prioritization, shaping, and policing mechanisms across multiple traffic levels to enforce service level agreements.
344 objects→
PRVT-MPLS-TE-MIB
The PRVT-MPLS-TE-MIB module enables the monitoring and management of MPLS Traffic Engineering Label Switched Paths (LSPs) by exposing RSVP-TE and Constraint-Based LDP tunnel attributes, including bandwidth reservations, explicit route objects, and LSP state transitions. It facilitates the collection of operational metrics such as tunnel setup status, resource utilization, and constraint violations to support network capacity planning and fault isolation within MPLS core infrastructures.
287 objects→
PRVT-ISIS-MIB
SNMP MIB module
251 objects→
PRVT-SWITCH-ACCESS-LIST-MIB
The PRVT-SWITCH-ACCESS-LIST-MIB module provides programmatic management of Layer 3 switch access control list (ACL) parameters, enabling the configuration and monitoring of packet filtering rules, rule ordering, and hit counters on private network switches.
230 objects→
PRVT-SWITCH-MIB
PRVT-SWITCH-MIB provides the management interface for private switch hardware parameters, enabling the monitoring of port states, traffic counters, and configuration attributes via SNMP. This module facilitates the collection of operational metrics required for switch performance analysis and fault isolation in private network environments.
216 objects→