PORT-MIB
AI MIB Summary
The PORT-MIB module provides SNMP access to monitor port status, traffic counters, and operational states for network interface cards installed within Coriolis chassis systems. This module enables administrators to track link up/down events, error statistics, and throughput metrics specific to the hardware interfaces managed by the Coriolis box architecture.
The MIB module for cards in coriolis boxes
Main OID:
portMIB.1.3.6.1.4.1.437.1.1.3.3.1
225
Objects
Active
Status
10
Dependencies
Imported Objects
Objects
225 total| Object Name |
|---|
portMIBThe MIB module for cards in coriolis boxes MODULE-IDENTITY .1.3.6.1.4.1.437.1.1.3.3.1 |
portTableThe port table. This contains the portNo variable, which is used as
an index into specific port tables SEQUENCE OF PortEntry .1.3.6.1.4.1.437.1.1.3.3.2 |
portEntryEntry containing the portNo variable PortEntry .1.3.6.1.4.1.437.1.1.3.3.2.1 |
portNoThe purpose of this variable is to be used as index into tables INTEGER .1.3.6.1.4.1.437.1.1.3.3.2.1.1 |
mib2IfIndexThis variable serves to identify the slot and port number.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.437.1.1.3.3.2.1.2 |
etherPortTableThe ethernet port table. This table contains information about
the ethernet ports in this device. SEQUENCE OF EtherPortEntry .1.3.6.1.4.1.437.1.1.3.3.3 |
etherPortEntryEntry containing information about ethernet ports EtherPortEntry .1.3.6.1.4.1.437.1.1.3.3.3.1 |
etherPortSpeedCfgThe desired port speed if Autonegotiation is disabled. Management
control of the port speed can also be accomplished through the MAU MIB
via ifMauDefaultType. Note that this object provides redundant information
with ifMauType. Normally, redundant objects are discouraged. However, in
this instance, it allows a management application to configure the duplex
mode of an interface without having to know every possible value of ifMauType.
This was felt to be sufficiently valuable to justify the redundancy.rw Enumeration .1.3.6.1.4.1.437.1.1.3.3.3.1.1 |
etherPortSpeedStatusThe speed of the port. If autoneg is enabled, this is determined by the
results of the autoneg process. If autoneg is disabled, this is the same
as IfAdminSpeed.rw Enumeration .1.3.6.1.4.1.437.1.1.3.3.3.1.2 |
etherPortDuplexCfgThe desired duplex mode of operation of the MAC entity if Autonegotiation
is disabled. Management control of the duplex mode can also be accomplished
through the MAU MIB via ifMauDefaultType.Note that this object provides redundant
information with ifMauType. Normally, redundant objects are discouraged. However,
in this instance, it allows a management application to configure the duplex mode
of an interface without having to know every possible value of ifMauType. This was
felt to be sufficiently valuable to justify the redundancy.rw Enumeration .1.3.6.1.4.1.437.1.1.3.3.3.1.3 |
etherPortLoopbackEnables/disables loopback mode.rw Enumeration .1.3.6.1.4.1.437.1.1.3.3.3.1.4 |
etherPortPhyResetEthernet port phy resetrw Enumeration .1.3.6.1.4.1.437.1.1.3.3.3.1.5 |
etherPortStatsTxPkts64OctetsTotal 64 byte packets transmitted on ethernet port.ro Counter .1.3.6.1.4.1.437.1.1.3.3.3.1.6 |
etherPortStatsTxPkts65to127OctetsThe total number of packets (including bad packets) transmitted
that were between 65 and 127 octets in length inclusive (excluding
framing bits but including FCS octets).ro Counter .1.3.6.1.4.1.437.1.1.3.3.3.1.7 |
etherPortStatsTxPkts128to255OctetsThe total number of packets (including bad packets) transmitted that
were between 128 and 255 octets in length inclusive (excluding framing
bits but including FCS octets).ro Counter .1.3.6.1.4.1.437.1.1.3.3.3.1.8 |
etherPortStatsTxPkts256to511OctetsThe total number of packets (including bad packets) transmitted that
were between 256 and 511 octets in length inclusive (excluding framing
bits but including FCS octets).ro Counter .1.3.6.1.4.1.437.1.1.3.3.3.1.9 |
etherPortStatsTxPkts512to1023OctetsThe total number of packets (including bad packets) transmitted that
were between 512 and 1023 octets in length inclusive (excluding framing
bits but including FCS octets).ro Counter .1.3.6.1.4.1.437.1.1.3.3.3.1.10 |
etherPortStatsTxPkts1024to1518OctetsThe total number of packets (including bad packets) transmitted that
were between 1024 and 1518 octets in length inclusive (excluding
framing bits but including FCS octets).ro Counter .1.3.6.1.4.1.437.1.1.3.3.3.1.11 |
etherPortStatsTxPkts1519to1530OctetsThe total number of packets (including bad packets) transmitted
that were between 1519 and 1530 octets in length inclusive (excluding
framing bits but including FCS octets).ro Counter .1.3.6.1.4.1.437.1.1.3.3.3.1.12 |
etherPortStatsTxFCSErrorsTotal packets transmitted on ethernet port with FCS errors (if MAC
generates the FCS, this can never be incremented).ro Counter .1.3.6.1.4.1.437.1.1.3.3.3.1.13 |
etherPortStatsTxOversizeNumber of frames transmitted greater than 1518 bytes.ro Counter .1.3.6.1.4.1.437.1.1.3.3.3.1.14 |
etherPortStatsTxUndersizeNumber of packets less than 64 bytes transmitted.ro Counter .1.3.6.1.4.1.437.1.1.3.3.3.1.15 |
etherPortStatsTxControlFramesNumber of control frames transmitted.ro Counter .1.3.6.1.4.1.437.1.1.3.3.3.1.16 |
etherPortStatsTxBadFifoUnderrunNumber of bad frames (due to Transmit FIFO underrun) transmitted.ro Counter .1.3.6.1.4.1.437.1.1.3.3.3.1.17 |
etherPortStatsTxBadFifoOverrunNumber of bad frames (due to Transmit FIFO overrun) transmitted.ro Counter .1.3.6.1.4.1.437.1.1.3.3.3.1.18 |
etherPortStatsTxDropFifoOverrunNumber of frames dropped due to Transmit FIFO underrun.ro Counter .1.3.6.1.4.1.437.1.1.3.3.3.1.19 |
etherPortStatsTxBadParityErrorNumber of bad frames (due to parity error) transmitted.ro Counter .1.3.6.1.4.1.437.1.1.3.3.3.1.20 |
etherPortStatsTxDropParityErrorNumber of bad frames (due to parity error) dropped.ro Counter .1.3.6.1.4.1.437.1.1.3.3.3.1.21 |
etherPortStatsTxBadSequenceErrorNumber of bad frames (due to frame Sequence Error) transmitted.ro Counter .1.3.6.1.4.1.437.1.1.3.3.3.1.22 |
etherPortStatsTxDropSequenceErrorNumber of bad frames (due to frame Sequence Error) dropped.ro Counter .1.3.6.1.4.1.437.1.1.3.3.3.1.23 |
etherPortStatsTxBadJamErrorNumber of bad frames (due to Jam Bit Error) transmitted.ro Counter .1.3.6.1.4.1.437.1.1.3.3.3.1.24 |
etherPortStatsTxDropJamErrorNumber of bad frames (due to Jam Bit Error) dropped.ro Counter .1.3.6.1.4.1.437.1.1.3.3.3.1.25 |
etherPortSpeedTrapEnableIndicates whether portSpeedTrap traps should be generated for this interface.rw Enumeration .1.3.6.1.4.1.437.1.1.3.3.3.1.26 |
etherPortDuplexTrapEnableEthernet port duplex trap enablerw Enumeration .1.3.6.1.4.1.437.1.1.3.3.3.1.27 |
etherPortAutonegTrapEnableIndicates whether autoNegCompleteTrap traps should be generated
for this interface.rw Enumeration .1.3.6.1.4.1.437.1.1.3.3.3.1.28 |
etherPortRowStatusThis variable is used to create or delete instances of ethernet ports
This variable subsumes the admin state variable, and once the row is
created, its value returns the admin state of the portrw Enumeration .1.3.6.1.4.1.437.1.1.3.3.3.1.29 |
etherPortAutonegAdvSpeedThis specifies what speed capability is advertised for autonegotiation.
If 100 MBPS is set, then 10 MBPS is also advertised.This does not apply
to Gig Ethernet Phys, since they do not autonegotiate speed or duplex.rw Enumeration .1.3.6.1.4.1.437.1.1.3.3.3.1.30 |
etherPortAutonegAdvDuplexThis specifies what duplex capability is advertised for autonegotiation.
If Full Duplex is set, then Half Duplex is also adveetised.This does not
apply to Gig Ethernet Phys, since they do not autonegotiate speed or duplex.rw Enumeration .1.3.6.1.4.1.437.1.1.3.3.3.1.31 |
etherPortPauseStateReceivedThe PAUSE mode received from the remote device, as read from the Auto
Negotiation Partner Ability GMII Register of the PHY.If autoNegotiation
is not enabled and completed, then this is set to undefined. This is
used to determine the dot3PauseOperMode for the interface.ro Enumeration .1.3.6.1.4.1.437.1.1.3.3.3.1.32 |
etherPortVlanModeSpecifies the VLAN mode for the portrw Enumeration .1.3.6.1.4.1.437.1.1.3.3.3.1.33 |
etherPortDefaultVlanIdSpecifies what the default Vlan Id is for the port.
This is used on ingress only if vlanMode is Enabled and a frame is received
either untagged or tagged with a VID not known to the port.rw INTEGER .1.3.6.1.4.1.437.1.1.3.3.3.1.34 |
etherPortRxOverrunThe total number of packets dropped by the GMAC due to the occurence of a receive
overrun (gig only- supported by GMAC-D2 and later)ro Counter .1.3.6.1.4.1.437.1.1.3.3.3.1.35 |
etherPortRxSyncErrorsThe total number of packets dropped due to loss of sync during packet reception.
(GIG only- supported by GMAC-D2 and later)ro Counter .1.3.6.1.4.1.437.1.1.3.3.3.1.36 |
etherPortRxDelSeqErrorsThe total number of packets dropped due to delimiter sequence errors as detected
by the GMAC during packet reception. (GIG only- supported by GMAC-D2 and later)ro Counter .1.3.6.1.4.1.437.1.1.3.3.3.1.37 |
etherPortRxFifoOverrunErrorsThe total number of packets dropped by the GMAC due to the occurence of a receive
FIFO overrun (gig only- supported by GMAC-D2 and later)ro Counter .1.3.6.1.4.1.437.1.1.3.3.3.1.38 |
etherPortRxControlFramesNumber of control frames received by this portro Counter .1.3.6.1.4.1.437.1.1.3.3.3.1.39 |
etherPortRxThreshOvrszFramesThe total number of threshold oversized frames received by the GMAC (gig only -
supported by GMAC-D2 and later)ro Counter .1.3.6.1.4.1.437.1.1.3.3.3.1.40 |
etherPortStatsRxPkts1519to1530OctetsThe total number of packets (including bad packets) received
that were between 1519 and 1530 octets in length inclusive (excluding
framing bits but including FCS octets).ro Counter .1.3.6.1.4.1.437.1.1.3.3.3.1.41 |
tdmIoDS1PortTableThe DS1 TDM IO Port Table SEQUENCE OF TdmIoDS1PortEntry .1.3.6.1.4.1.437.1.1.3.3.4 |
tdmIoDS1PortEntryEntry containing information about TDM IO DS1 ports TdmIoDS1PortEntry .1.3.6.1.4.1.437.1.1.3.3.4.1 |
tdmIoDS1PortTypeThe type of TDM IO DS1 portrw Enumeration .1.3.6.1.4.1.437.1.1.3.3.4.1.1 |
tdmIoDS1PortTimingClock source for the DS1 port
'loopTiming' indicates that the recovered re-
ceive clock is used as the transmit clock.
'localTiming' indicates that a local clock
source is used or when an external clock is
attached to the box containing the interface.
'throughTiming' indicates that recovered re-
ceive clock from another interface is used as
the transmit clock.rw Enumeration .1.3.6.1.4.1.437.1.1.3.3.4.1.2 |
tdmIoDS1PortBuildOutLine Build Out for Signal Strength. For short haul, a distance (in feet)
is chosen. For long haul, an attenuation strength is chosen in Decibels.rw Enumeration .1.3.6.1.4.1.437.1.1.3.3.4.1.5 |
tdmIoDS1PortFramingFraming type implemented for this interface.ro Enumeration .1.3.6.1.4.1.437.1.1.3.3.4.1.6 |
tdmIoDS1PortCodingThe type of Zero Code Suppression used on this interface.
B8ZS refers to the use of a specified pattern
of normal bits and bipolar violations which are
used to replace a sequence of eight zero bits.
AMI refers to a mode wherein no zero code
suppression is present and the line encoding does
not solve the problem directly. In this
application, the higher layer must provide data
which meets or exceeds the pulse density
requirements, such as inverting HDLC data.rw Enumeration .1.3.6.1.4.1.437.1.1.3.3.4.1.7 |
tdmIoDS1PortLoopbackStateThis object indicates the state of loopback on this
interface. 'Idle' indicates that there is no loopback
running and 'running' indicates that this interface is
in loopback mode.ro Enumeration .1.3.6.1.4.1.437.1.1.3.3.4.1.8 |
tdmIoDS1PortLoopbackTypeThis object indicates the type of loopback on this
interface.
noLoop - the interface is not in loopBack mode.
localOn - the interface is running in internal loop.
digitalOn - the interface is running in internal loop.
remoteOn - the interface is looping away external data.rw Enumeration .1.3.6.1.4.1.437.1.1.3.3.4.1.9 |
tdmIoDS1PortLoopbackResultsResults from previous loopback on this portro Enumeration .1.3.6.1.4.1.437.1.1.3.3.4.1.10 |
tdmIoDS1PortLoopbackLLbActCodeUser code to enable Automatic Remote Loopback(ARL)rw INTEGER .1.3.6.1.4.1.437.1.1.3.3.4.1.11 |
tdmIoDS1PortLoopbackLLbDeactCodeUser code to disable Automatic Remote Loopback(ARL)rw INTEGER .1.3.6.1.4.1.437.1.1.3.3.4.1.12 |
tdmIoDS1PortLoopbackLlbActCodeLenLength of user code to enable Automatic Remote Loopback(ARL)rw Enumeration .1.3.6.1.4.1.437.1.1.3.3.4.1.13 |
tdmIoDS1PortLoopbackLlbDeactCodeLenLength of user code to disable Automatic Remote Loopback(ARL)rw Enumeration .1.3.6.1.4.1.437.1.1.3.3.4.1.14 |
tdmIoDS1PortLoopbackLlbControlLLBCODE(activate/deactivate) generation/monitoring controlrw Enumeration .1.3.6.1.4.1.437.1.1.3.3.4.1.15 |
tdmIoDS1PortLoopbackLlbGenPathThe path (xmit/rcv) for LLBCODE generationrw Enumeration .1.3.6.1.4.1.437.1.1.3.3.4.1.16 |
tdmIoDS1PortLoopbackLlbMonPathThe path (xmit/rcv) for LLBCODE monitoringrw Enumeration .1.3.6.1.4.1.437.1.1.3.3.4.1.17 |
tdmIoDS1PortPrbsAlgorithmThe PRBS Algorithmrw Enumeration .1.3.6.1.4.1.437.1.1.3.3.4.1.18 |
tdmIoDS1PortPrbsInversionWhether the PRBS stream will be invertedro Enumeration .1.3.6.1.4.1.437.1.1.3.3.4.1.19 |
tdmIoDS1PortPrbsGenPathThe PRBS generator pathrw Enumeration .1.3.6.1.4.1.437.1.1.3.3.4.1.20 |
tdmIoDS1PortPrbsMonPathThe PRBS monitor pathrw Enumeration .1.3.6.1.4.1.437.1.1.3.3.4.1.21 |
tdmIoDS1PortPrbsMonitorPRBS monitor - is it off or on?rw Enumeration .1.3.6.1.4.1.437.1.1.3.3.4.1.22 |
tdmIoDS1PortPrbsTransmitPRBS or normal transmission on transmission linerw Enumeration .1.3.6.1.4.1.437.1.1.3.3.4.1.23 |
tdmIoDS1PortPrbsBecThe PRBS bit error counterro Counter .1.3.6.1.4.1.437.1.1.3.3.4.1.24 |
tdmIoDS1PortBertStateUser specified BERT statusro Enumeration .1.3.6.1.4.1.437.1.1.3.3.4.1.25 |
tdmIoDS1PortBertPatternUser specified BERT typerw Enumeration .1.3.6.1.4.1.437.1.1.3.3.4.1.26 |
tdmIoDS1PortBertDurationUser specified BERT durationrw Enumeration .1.3.6.1.4.1.437.1.1.3.3.4.1.27 |
tdmIoDS1PortBertResultsResults from previous BERT test on this portro Enumeration .1.3.6.1.4.1.437.1.1.3.3.4.1.28 |
tdmIoDS1PortLineESS15MinThe 15 minute Line Errored Seconds Thresholdrw INTEGER .1.3.6.1.4.1.437.1.1.3.3.4.1.29 |
tdmIoDS1PortPathESS15MinThe 15 minute Path Errored Seconds Thresholdrw INTEGER .1.3.6.1.4.1.437.1.1.3.3.4.1.30 |
tdmIoDS1PortLineESS1DayThe 1 Day Line Errored Seconds Thresholdrw INTEGER .1.3.6.1.4.1.437.1.1.3.3.4.1.31 |
tdmIoDS1PortPathESS1DayThe 1 Day Path Errored Seconds Thresholdrw INTEGER .1.3.6.1.4.1.437.1.1.3.3.4.1.32 |
tdmIoDS1PortPathCVS15MinThe 15 minute Path Coding Violations Thresholdrw INTEGER .1.3.6.1.4.1.437.1.1.3.3.4.1.33 |
tdmIoDS1PortPathCVS1DayThe 1 day Path Coding Violations Thresholdrw INTEGER .1.3.6.1.4.1.437.1.1.3.3.4.1.34 |
tdmIoDS1PortPathSESS15MinThe 15 minute Path Severely Errored Seconds Thresholdrw INTEGER .1.3.6.1.4.1.437.1.1.3.3.4.1.35 |
tdmIoDS1PortPathSESS1DayThe 1 day Path Severely Errored Seconds Thresholdrw INTEGER .1.3.6.1.4.1.437.1.1.3.3.4.1.36 |
tdmIoDS1PortPathSASS15MinThe 15 minute Path AIS seconds Thresholdrw INTEGER .1.3.6.1.4.1.437.1.1.3.3.4.1.37 |
tdmIoDS1PortPathSASS1DayThe 1 day Path AIS seconds Thresholdrw INTEGER .1.3.6.1.4.1.437.1.1.3.3.4.1.38 |
tdmIoDS1PortPathCSS15MinThe 15 minute path controlled slip seconds thresholdrw INTEGER .1.3.6.1.4.1.437.1.1.3.3.4.1.39 |
tdmIoDS1PortPathCSS1DayThe 1 day path controlled slip seconds thresholdrw INTEGER .1.3.6.1.4.1.437.1.1.3.3.4.1.40 |
tdmIoDS1PortPathUASS15MinThe 15 minute path unavailable seconds thresholdrw INTEGER .1.3.6.1.4.1.437.1.1.3.3.4.1.41 |
tdmIoDS1PortRowStatusThis variable is used to create or delete instances of TDM IO DS1 ports.
This variable subsumes the admin state variable, and once the row is
created, its value returns the admin state of the portrw Enumeration .1.3.6.1.4.1.437.1.1.3.3.4.1.42 |
dsxStatusDSx line status.ro Enumeration .1.3.6.1.4.1.437.1.1.3.3.4.1.43 |
tdmIoDS1PortLCVCountCount of Line Code Violations.ro INTEGER .1.3.6.1.4.1.437.1.1.3.3.4.1.44 |
sonetPortTableThe proprietary SONET Port Table SEQUENCE OF SonetPortEntry .1.3.6.1.4.1.437.1.1.3.3.5 |
sonetPortEntryEntry containing information about SONET ports SonetPortEntry .1.3.6.1.4.1.437.1.1.3.3.5.1 |
sonetPortTypeThe type of SONET portrw Enumeration .1.3.6.1.4.1.437.1.1.3.3.5.1.1 |
sonetPortIdStringThe identifier string for the SONET portrw OCTET STRING .1.3.6.1.4.1.437.1.1.3.3.5.1.2 |
sonetPortTimingClock source for the portrw Enumeration .1.3.6.1.4.1.437.1.1.3.3.5.1.3 |
sonetPortLoopbackThe types of loopback available on the SONET interface.rw Enumeration .1.3.6.1.4.1.437.1.1.3.3.5.1.4 |
sonetPortScramblingWhether port scrambling is enabled or disabledrw Enumeration .1.3.6.1.4.1.437.1.1.3.3.5.1.5 |
sonetPortChannelizationWhether the physical port is concatenated or notrw Enumeration .1.3.6.1.4.1.437.1.1.3.3.5.1.6 |
sonetPortConfigedChansThe channels configured on the portro Unsigned32 .1.3.6.1.4.1.437.1.1.3.3.5.1.7 |
sonetPortSectESS15Min15 minute section errored seconds thresholdrw INTEGER .1.3.6.1.4.1.437.1.1.3.3.5.1.8 |
sonetPortLineESS15Min15 minute line errored seconds thresholdrw INTEGER .1.3.6.1.4.1.437.1.1.3.3.5.1.9 |
sonetPortPathESS15Min15 minute path errored seconds thresholdrw INTEGER .1.3.6.1.4.1.437.1.1.3.3.5.1.10 |
sonetPortSectESS1Day1 day section errored seconds thresholdrw INTEGER .1.3.6.1.4.1.437.1.1.3.3.5.1.11 |
sonetPortLineESS1Day1 day line errored seconds thresholdrw INTEGER .1.3.6.1.4.1.437.1.1.3.3.5.1.12 |
sonetPortPathESS1Day1 day path errored seconds thresholdrw INTEGER .1.3.6.1.4.1.437.1.1.3.3.5.1.13 |
sonetPortSectCVS15Min15 minute section coding violations thresholdrw INTEGER .1.3.6.1.4.1.437.1.1.3.3.5.1.14 |
sonetPortLineCVS15Min15 minute line coding violations thresholdrw INTEGER .1.3.6.1.4.1.437.1.1.3.3.5.1.15 |
sonetPortPathCVS15Min15 minutes path coding violations thresholdrw INTEGER .1.3.6.1.4.1.437.1.1.3.3.5.1.16 |
sonetPortSectCVS1Day1 day section coding violations thresholdrw INTEGER .1.3.6.1.4.1.437.1.1.3.3.5.1.17 |
sonetPortLineCVS1Day1 day line coding violations thresholdrw INTEGER .1.3.6.1.4.1.437.1.1.3.3.5.1.18 |
sonetPortPathCVS1Day1 day path coding violations thresholdrw INTEGER .1.3.6.1.4.1.437.1.1.3.3.5.1.19 |
sonetPortSectSESS15Min15 minutes section severely errored seconds thresholdrw INTEGER .1.3.6.1.4.1.437.1.1.3.3.5.1.20 |
sonetPortLineSESS15Min15 minutes line severely errored seconds thresholdrw INTEGER .1.3.6.1.4.1.437.1.1.3.3.5.1.21 |
sonetPortPathSESS15Min15 minutes path severely errored seconds thresholdrw INTEGER .1.3.6.1.4.1.437.1.1.3.3.5.1.22 |
sonetPortSectSESS1Day1 day section severely errored seconds thresholdrw INTEGER .1.3.6.1.4.1.437.1.1.3.3.5.1.23 |
sonetPortLineSESS1Day1 day line severely errored seconds thresholdrw INTEGER .1.3.6.1.4.1.437.1.1.3.3.5.1.24 |
sonetPortPathSESS1Day1 day path severely errored seconds thresholdrw INTEGER .1.3.6.1.4.1.437.1.1.3.3.5.1.25 |
sonetPortLineUASS15Min15 minutes line unavailable seconds thresholdrw INTEGER .1.3.6.1.4.1.437.1.1.3.3.5.1.26 |
sonetPortPathUASS15Min15 minutes path unavailable seconds thresholdrw INTEGER .1.3.6.1.4.1.437.1.1.3.3.5.1.27 |
sonetPortLineUASS1Day1 day line unavailable seconds thresholdrw INTEGER .1.3.6.1.4.1.437.1.1.3.3.5.1.28 |
sonetPortPathUASS1Day1 day path unavailable seconds thresholdrw INTEGER .1.3.6.1.4.1.437.1.1.3.3.5.1.29 |
sonetPortRowStatusThis variable is used to create or delete instances of SONET ports
This variable subsumes the admin state variable, and once the row is
created, its value returns the admin state of the portrw Enumeration .1.3.6.1.4.1.437.1.1.3.3.5.1.30 |
sonetTCAStatusRepresents the Threshold Crossing Alarm.ro Enumeration .1.3.6.1.4.1.437.1.1.3.3.5.1.31 |
atmPortTableThe ATM Port Table SEQUENCE OF AtmPortEntry .1.3.6.1.4.1.437.1.1.3.3.6 |
atmPortEntryEntry containing information about atm ports AtmPortEntry .1.3.6.1.4.1.437.1.1.3.3.6.1 |
atmPortVPTunnelWhether this port is a VP Tunnelrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.437.1.1.3.3.6.1.1 |
atmPortMaxTotalBitsMax Total Bits of VPI & VCIro INTEGER .1.3.6.1.4.1.437.1.1.3.3.6.1.2 |
atmPortTimingTiming Moderw Enumeration .1.3.6.1.4.1.437.1.1.3.3.6.1.3 |
atmPortInCellsInput Cell Countro Counter32 .1.3.6.1.4.1.437.1.1.3.3.6.1.4 |
atmPortOutCellsOutput Cell Countro Counter32 .1.3.6.1.4.1.437.1.1.3.3.6.1.5 |
atmPortCDVTCell Delay Variation Tolerance (CDVT) is measured
in units of seconds per cell. For OC12c ATM the
link rate is approximately 1.4 million cells per
second, each cell time being approximately 700
nanoseconds. Its value is initialized to 50,000
which is approximately 0.7% of the OC12c line rate.
The value ranges from 5,000 to 100,000 which gives
us a CDVT range of 7 to 141 cell times.rw INTEGER .1.3.6.1.4.1.437.1.1.3.3.6.1.6 |
atmPortMaxActvBitsMaximum active VPI/VCI bitsrw OCTET STRING .1.3.6.1.4.1.437.1.1.3.3.6.1.7 |
atmPortHCInCells64 bit input cell countro Counter64 .1.3.6.1.4.1.437.1.1.3.3.6.1.8 |
atmPortHCOutCells64 bit output cell countro Counter64 .1.3.6.1.4.1.437.1.1.3.3.6.1.9 |
atmPortRowStatusThis variable is used to create or delete instances of atm ports
This variable subsumes the admin state variable, and once the row is
created, its value returns the admin state of the portrw Enumeration .1.3.6.1.4.1.437.1.1.3.3.6.1.10 |
opticalPortTableThe Optical Port Table SEQUENCE OF OpticalPortEntry .1.3.6.1.4.1.437.1.1.3.3.7 |
opticalPortEntryThis describes the attributes of optical ports in the system OpticalPortEntry .1.3.6.1.4.1.437.1.1.3.3.7.1 |
lambdaThe purpose of this variable is to be used as the third component of the
index into the optical port table INTEGER .1.3.6.1.4.1.437.1.1.3.3.7.1.1 |
opticalPortModeThe mode of operation of the port. This is set initially by the user
and can only be changed by the user. It is not a status. By default,
all optical ports in the system come up as working. They have to be explicitly
configured to work in a protected mode or to be turned off.rw Enumeration .1.3.6.1.4.1.437.1.1.3.3.7.1.2 |
opticalPortRxSMselectThis object selects which lambda to send over the back-plane to
the different switch module. Enumeration .1.3.6.1.4.1.437.1.1.3.3.7.1.3 |
opticalPortTxSMselectSelects between lambda feeds on the back plane wich originate
in different switch module.rw Enumeration .1.3.6.1.4.1.437.1.1.3.3.7.1.4 |
opticalPortRxSignalStateProvides the status of the received optical signal - whether
it is detected or not.ro Enumeration .1.3.6.1.4.1.437.1.1.3.3.7.1.5 |
opticalPortRxFrameStateFrame state of signal as detected by SW at SONET framer. This
state is auto set by software.ro Enumeration .1.3.6.1.4.1.437.1.1.3.3.7.1.6 |
opticalPortTxStatusProvides the status of the transmitter for the optical port. This
provides the operational condition of the transmitter. The value
of it could be 'Good' even though it is not transmitting any
signal due to some reason.ro Enumeration .1.3.6.1.4.1.437.1.1.3.3.7.1.7 |
opticalPortTxEnableWhether the transmission of data and interrupts on the optical port
is enabled or disabledrw Enumeration .1.3.6.1.4.1.437.1.1.3.3.7.1.8 |
opticalPortLaserPowerLevelThe laser power level on the port - this variable is useful for
tunable lasers. Currently will return a value of high(1) Enumeration .1.3.6.1.4.1.437.1.1.3.3.7.1.9 |
opticalPortLaserWavelengthLaser wavelength on the optical port. Currently will return
1 for DWDM ports, 2 for 1310 ports, 3 for 1550 ports and 4
for ports that support both 1310 and 1550 nm wavelengths. This value
however will be overshadowed by a 1310 or 1550 wavelength card present in
that system. The list will be expanded later to give the exact 15xx
wavelength. Useful for tunable lasers to control the 15xx wavelengthrw Enumeration .1.3.6.1.4.1.437.1.1.3.3.7.1.10 |
opticalPortRowStatusThis variable is used to create or delete instances of optical portrw Enumeration .1.3.6.1.4.1.437.1.1.3.3.7.1.11 |
ringPortTableA table containing ring port variables. SEQUENCE OF RingPortEntry .1.3.6.1.4.1.437.1.1.3.3.8 |
ringPortEntryEntry in the table for a single ring port. RingPortEntry .1.3.6.1.4.1.437.1.1.3.3.8.1 |
ringPortArbiterEnabledThe arbiter enabled Boolean defines whether the ring port Arbitration
Logic is enabled or not. The Arbitration Logic services requests for
extra data columns from an elastic bandwidth pool.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.437.1.1.3.3.8.1.1 |
ringPortFrameModeThe frame mode defines the data path mode of the ring port. The
choices include AXSON and POS. AXSON frame mode means the ring
encapsulates data inside AXSON frames, and POS means data is
encapsulated using the Packet over SONET standard HDLC mechanism.rw Enumeration .1.3.6.1.4.1.437.1.1.3.3.8.1.2 |
ringPortMaxChannelsThe max channels parameter sizes the number of AxSON channels
supported on the ring port. This determines number of ingress and
egress queues and the amount of queue memory available.rw INTEGER .1.3.6.1.4.1.437.1.1.3.3.8.1.3 |
ringPortMaxSubChannelsThe max sub-channels parameter sizes the number of AxSON sub-channels
supported in a particular AxSON channel. This determines the amount of
queue memory required.rw INTEGER .1.3.6.1.4.1.437.1.1.3.3.8.1.4 |
ringPortAutoQueueSizingDefines whether Axson channel queues may be automatically resized
during provisioning.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.437.1.1.3.3.8.1.5 |
ringPortRingModeWhether the ring port is connected to the working ring or the protected ringrw Enumeration .1.3.6.1.4.1.437.1.1.3.3.8.1.6 |
ringPortNodeIdThis defines the temporal discovery of the node in the logical ringrw INTEGER .1.3.6.1.4.1.437.1.1.3.3.8.1.7 |
ringPortAdminStatusGives the possible ringPort Administration Status .rw Enumeration .1.3.6.1.4.1.437.1.1.3.3.8.1.8 |
ringPortOperStatusGives the ringPortNodeId operational status of the AXSON interface .ro Enumeration .1.3.6.1.4.1.437.1.1.3.3.8.1.9 |
ringPortRxFramesThis object sepcifies the number of frames received at this interface.ro Counter .1.3.6.1.4.1.437.1.1.3.3.8.1.10 |
ringPortRxFrameErrorsNumber of errored frames received at this interface.ro Counter .1.3.6.1.4.1.437.1.1.3.3.8.1.11 |
ringPortTxFramesThis object sepcifies the number of frames transmitted from this interface.ro Counter .1.3.6.1.4.1.437.1.1.3.3.8.1.12 |
ringPortMaxTDMChannelsThe maximum number of TDM channels supported on the ringrw INTEGER .1.3.6.1.4.1.437.1.1.3.3.8.1.13 |
ringPortK1K2StatusThe status indicated by the K1,K2 bytes in the SONET
frame overheadro Enumeration .1.3.6.1.4.1.437.1.1.3.3.8.1.14 |
ringPortAISStatusThe status indicated by the AIS bytes in the SONET
frame overheadro Enumeration .1.3.6.1.4.1.437.1.1.3.3.8.1.15 |
ringPortPHYStatusThe physical status of the ring port.ro Enumeration .1.3.6.1.4.1.437.1.1.3.3.8.1.16 |
tdmIoDS3PortTableThe DS3 TDM IO Port Table SEQUENCE OF TdmIoDS3PortEntry .1.3.6.1.4.1.437.1.1.3.3.9 |
tdmIoDS3PortEntryEntry containing information about TDM IO DS3 ports TdmIoDS3PortEntry .1.3.6.1.4.1.437.1.1.3.3.9.1 |
tdmIoDS3PortPBitESS15Min15 minute threshold for P-Bit Errored Secondsrw INTEGER .1.3.6.1.4.1.437.1.1.3.3.9.1.1 |
tdmIoDS3PortPBitESS1Day1 day threshold for P-Bit Errored Secondsrw INTEGER .1.3.6.1.4.1.437.1.1.3.3.9.1.2 |
tdmIoDS3PortPBitSESS15Min15 minute threshold for P-Bit Severely Errored Secondsrw INTEGER .1.3.6.1.4.1.437.1.1.3.3.9.1.3 |
tdmIoDS3PortPBitSESS1Day1 day threshold for P-Bit Severely Errored Secondsrw INTEGER .1.3.6.1.4.1.437.1.1.3.3.9.1.4 |
tdmIoDS3PortSEFSS15Min15 minute threshold for Severely Errored Framing Secondsrw INTEGER .1.3.6.1.4.1.437.1.1.3.3.9.1.5 |
tdmIoDS3PortSEFSS1Day1 day threshold for Severely Errored Framing Secondsrw INTEGER .1.3.6.1.4.1.437.1.1.3.3.9.1.6 |
tdmIoDS3PortUASS15Min15 minute threshold for Severely Errored Framing Secondsrw INTEGER .1.3.6.1.4.1.437.1.1.3.3.9.1.7 |
tdmIoDS3PortUASS1Day1 day threshold for Unavailable Secondsrw INTEGER .1.3.6.1.4.1.437.1.1.3.3.9.1.8 |
tdmIoDS3PortLineCVS15Min15 minute threshold for Line-Coding Violationsrw INTEGER .1.3.6.1.4.1.437.1.1.3.3.9.1.9 |
tdmIoDS3PortLineCVS1Day1 day threshold for Line-Coding Violationsrw INTEGER .1.3.6.1.4.1.437.1.1.3.3.9.1.10 |
tdmIoDS3PortPBitCVS15Min15 minute threshold for P-Bit Coding Violationsrw INTEGER .1.3.6.1.4.1.437.1.1.3.3.9.1.11 |
tdmIoDS3PortPBitCVS1Day1 day threshold for P-Bit Coding Violationsrw INTEGER .1.3.6.1.4.1.437.1.1.3.3.9.1.12 |
tdmIoDS3PortLineESS15Min15 minute threshold for Line Errored Secondsrw INTEGER .1.3.6.1.4.1.437.1.1.3.3.9.1.13 |
tdmIoDS3PortLineESS1Day1 day threshold for Line Errored Secondsrw INTEGER .1.3.6.1.4.1.437.1.1.3.3.9.1.14 |
tdmIoDS3PortCBitCVS15Min15 minute threshold for C-Bit Coding Violationsrw INTEGER .1.3.6.1.4.1.437.1.1.3.3.9.1.15 |
tdmIoDS3PortCBitCVS1Day1 day threshold for C-Bit Coding Violationsrw INTEGER .1.3.6.1.4.1.437.1.1.3.3.9.1.16 |
tdmIoDS3PortCBitESS15Min15 minute threshold for C-Bit Errored Secondsrw INTEGER .1.3.6.1.4.1.437.1.1.3.3.9.1.17 |
tdmIoDS3PortCBitESS1Day1 day threshold for C-Bit Errored Secondsrw INTEGER .1.3.6.1.4.1.437.1.1.3.3.9.1.18 |
tdmIoDS3PortCBitSESS15Min15 minute threshold for C-Bit Severely Errored Secondsrw INTEGER .1.3.6.1.4.1.437.1.1.3.3.9.1.19 |
tdmIoDS3PortCBitSESS1Day1 day threshold for C-Bit Severely Errored Secondsrw INTEGER .1.3.6.1.4.1.437.1.1.3.3.9.1.20 |
tdmIoDS3PortRowStatusThis variable is used to create or delete instances of TDM IO DS3 ports.
This variable subsumes the admin state variable, and once the row is
created, its value returns the admin state of the portrw Enumeration .1.3.6.1.4.1.437.1.1.3.3.9.1.21 |
posPortTableThe POS Port Table SEQUENCE OF PosPortEntry .1.3.6.1.4.1.437.1.1.3.3.10 |
posPortEntryEntry containing information about POS ports PosPortEntry .1.3.6.1.4.1.437.1.1.3.3.10.1 |
posPortTransportSegmentCountNumber of provisioned connections on port.ro Counter32 .1.3.6.1.4.1.437.1.1.3.3.10.1.1 |
posPortModemode of operation.rw Enumeration .1.3.6.1.4.1.437.1.1.3.3.10.1.2 |
posPortDefaultVIDPort's default VLAN ID.rw Unsigned32 .1.3.6.1.4.1.437.1.1.3.3.10.1.3 |
posPortMinPktSizeIt is defined as the minimum number of bytes encapsulated in
the POS frame including the FCS, but excluding byte stuffing.rw INTEGER .1.3.6.1.4.1.437.1.1.3.3.10.1.4 |
posPortMaxPktSizeIt is defined as the maximum number of bytes encapsulated in
the POS frame including the FCS, but excluding byte stuffing.rw INTEGER .1.3.6.1.4.1.437.1.1.3.3.10.1.5 |
posPortMinPktViolationsThis object gives the number of times the system had detected
a packet of size less than the acceptable minimum.ro Counter32 .1.3.6.1.4.1.437.1.1.3.3.10.1.6 |
posPortMaxPktViolationsThis object gives the number of times the system had detected
a packet of size greater than the acceptable minimum.ro Counter32 .1.3.6.1.4.1.437.1.1.3.3.10.1.7 |
portPhyStatusChangeChange in the operational status of a port, 1 means the port came up,
2 means it went down TRAP-TYPE .1.3.6.1.4.1.5812.0.0 |
portAdminStatusChangeChange in the admin status of a port, 1 means the port came up,
2 means it went down TRAP-TYPE .1.3.6.1.4.1.5812.0.1 |
portSpeedStatusTrapChange in speed of an interface e.g. 10 or 100 for a Fast Ethernet port TRAP-TYPE .1.3.6.1.4.1.5812.0.20 |
etherPortDuplexStatusTrapChange in the duplex status of an ethernet port , 2 means half-duplex,
3 means full duplex TRAP-TYPE .1.3.6.1.4.1.5812.0.21 |
etherPortAutonegStatusTrapChange in status of the autoneg process, 3 means it has completed TRAP-TYPE .1.3.6.1.4.1.5812.0.22 |
sonetSectionLOSChangeChange in the SONET LOS status. TRAP-TYPE .1.3.6.1.4.1.5812.0.27 |
sonetSectionLOFChangeChange in the SONET LOF status. TRAP-TYPE .1.3.6.1.4.1.5812.0.28 |
sonetLineAISChangeChange in the SONET Line AIS status. TRAP-TYPE .1.3.6.1.4.1.5812.0.29 |
sonetLineRDIChangeChange in the SONET Line RDI status. TRAP-TYPE .1.3.6.1.4.1.5812.0.30 |
sonetPathLOPChangeChange in the SONET Path LOP status. TRAP-TYPE .1.3.6.1.4.1.5812.0.31 |
sonetPathAISChangeChange in the SONET Path AIS status. TRAP-TYPE .1.3.6.1.4.1.5812.0.32 |
sonetPathRDIChangeChange in the SONET Path RDI status. TRAP-TYPE .1.3.6.1.4.1.5812.0.33 |
sonetPathUNEQPChangeIndicates whether the SONET path is equipped or not. TRAP-TYPE .1.3.6.1.4.1.5812.0.34 |
sonetPathPSLMChangeIndicates if there is any mismatch in the SONET signal label. TRAP-TYPE .1.3.6.1.4.1.5812.0.35 |
sonetVTLOPChangeChange in the SONET VT LOP status. TRAP-TYPE .1.3.6.1.4.1.5812.0.36 |
sonetVTAISChangeChange in the SONET VT AIS status. TRAP-TYPE .1.3.6.1.4.1.5812.0.37 |
sonetVTRDIChangeChange in the SONET VT RDI status. TRAP-TYPE .1.3.6.1.4.1.5812.0.38 |
sonetVTRFIChangeChange in the SONET VT RFI status. TRAP-TYPE .1.3.6.1.4.1.5812.0.39 |
sonetVTUNEQPChangeIndicates whether the SONET VT is equipped or not. TRAP-TYPE .1.3.6.1.4.1.5812.0.40 |
sonetVTPSLMChangeIndicates if there is any mismatch in the SONET signal label. TRAP-TYPE .1.3.6.1.4.1.5812.0.41 |
ringPortK1K2ChangeIndicates the change in status indicated by K1,K2 bytes TRAP-TYPE .1.3.6.1.4.1.5812.0.47 |
ringPortAISChangeA signal indicating a change of status indicated by the AIS bytes TRAP-TYPE .1.3.6.1.4.1.5812.0.48 |
ringPortPHYChangeA trap indicating the change in phy status of ring port TRAP-TYPE .1.3.6.1.4.1.5812.0.49 |
sonetPortTCAlarmA SONET alarm threshold has been crossed. TRAP-TYPE .1.3.6.1.4.1.5812.0.50 |
dsxAlarmThe status of a DSx line has changed. TRAP-TYPE .1.3.6.1.4.1.5812.0.55 |