POLICY-DEVICE-AUX-MIB
The POLICY-DEVICE-AUX-MIB module enables the monitoring and management of policy-based provisioning parameters on network devices, specifically tracking auxiliary policy objects, rule states, and configuration attributes required for dynamic traffic steering and service enforcement.
Imported Objects
Objects
14 total| Object Name |
|---|
policyDeviceAuxMibThis module defines an infrastructure used for support of policy-based provisioning of a network device. MODULE-IDENTITY .1.3.6.1.3.999 |
policyDeviceAuxObjects OBJECT IDENTIFIER .1.3.6.1.3.999.1 |
policyDeviceConfig OBJECT IDENTIFIER .1.3.6.1.3.999.1.1 |
policyInterfaceTablePolicy information about a device's interfaces. SEQUENCE OF PolicyInterfaceEntry .1.3.6.1.3.999.1.1.1 |
policyInterfaceEntryA conceptual row in the policyInterfaceTable. Each row identifies policy infromation about a particular interface. PolicyInterfaceEntry .1.3.6.1.3.999.1.1.1.1 |
policyInterfaceIfIndexThe ifIndex value for which this conceptual row provides policy information. InterfaceIndex (IF-MIB) .1.3.6.1.3.999.1.1.1.1.1 |
policyInterfaceRoleComboThe role combination that is associated with this interface for the purpose of assigning policies to this interface.rw RoleCombination .1.3.6.1.3.999.1.1.1.1.2 |
policyInterfaceStorageThe storage type for this conceptual row. Conceptual rows having the value permanent(4) need not allow write-access to any columnar objects in the row. This object may not be modified if the associated policyInterfaceStatus object is equal to active(1).rw StorageType (SNMPv2-TC) .1.3.6.1.3.999.1.1.1.1.3 |
policyInterfaceStatusThe status of this row. An entry may not exist in the active state unless all objects in the entry have an appropriate value. Row creation using only default values is supported.rw RowStatus (SNMPv2-TC) .1.3.6.1.3.999.1.1.1.1.4 |
policyDeviceAuxConformance OBJECT IDENTIFIER .1.3.6.1.3.999.2 |
policyDeviceCompliances OBJECT IDENTIFIER .1.3.6.1.3.999.2.1 |
policyDeviceComplianceDescribes the requirements for conformance to the Policy Auxiliary MIB. Unknown .1.3.6.1.3.999.2.1.1 |
policyDeviceGroups OBJECT IDENTIFIER .1.3.6.1.3.999.2.2 |
policyInterfaceGroupObjects used to define interface to role combination mappings. Unknown .1.3.6.1.3.999.2.2.1 |
More MIBs from Default
Browse all DefaultMIBs →SNMP MIB module
The AVAYA-WLAN-MIB provides SNMP-based management and monitoring capabilities for Avaya wireless LAN infrastructure, enabling the collection of performance metrics such as access point status, client association counts, signal strength, and radio interface statistics. This module facilitates the tracking of WLAN-specific events and configuration parameters to support network availability and troubleshooting within Avaya wireless deployments.
The VMWARE-NSX-MIB enables SNMP-based monitoring and management of VMware NSX-T Data Center virtual network infrastructure, exposing metrics for logical switches, routers, distributed firewalls, and overlay tunnel states. It facilitates the tracking of Layer 2 through Layer 7 service instances, including access control lists, Quality of Service policies, and virtual network topology changes within the software-defined networking environment.
Standard SNMP MIB module defining data structures for 923switch.m.
Standard SNMP MIB module defining data structures for CTATX-MIB.
SNMP MIB module