PIM-SM-MIB
The Structure of PIM SM Information for the proprietary enterprise.
Main OID:
swPimSmMIB.1.3.6.1.4.1.171.12.52
74
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
74 total| Object Name |
|---|
swPimSmMIBThe Structure of PIM SM Information for the proprietary enterprise. MODULE-IDENTITY .1.3.6.1.4.1.171.12.52 |
swPimSmCtrl OBJECT IDENTIFIER .1.3.6.1.4.1.171.12.52.1 |
swPimSmGlobalStateUsed to control PIM-SM state.rw Enumeration .1.3.6.1.4.1.171.12.52.1.1 |
swPimSmInfo OBJECT IDENTIFIER .1.3.6.1.4.1.171.12.52.2 |
swPimRegisterProbeTimeUsed to set a time to send a probe message from the Designated Router (DR) to the Rendezvous Point (RP) before the Register Suppression time expires. If a Register Stop message is received by the DR, the Register Suppression Time will be restarted. If no Register Stop message is received within the probe time, Register Packets will be resent to the RP. The default value is 5 seconds.rw Integer32 .1.3.6.1.4.1.171.12.52.2.1 |
swPimRegisterSuppressionTimeThe time interval between receiving a Register-Stop message and restarting the process of sending of register messages again. A lower value represents an increase in register messages being sent to the RP, while a higher value represents a longer latency period for new receivers wishing to join the group.rw Integer32 .1.3.6.1.4.1.171.12.52.2.2 |
swPimInfoTableThe PIM Information Table contains PIM related information, such as DR priority. SEQUENCE OF SwPimInfoEntry .1.3.6.1.4.1.171.12.52.2.3 |
swPimInfoEntryAn entry in the PIM Information Table. SwPimInfoEntry .1.3.6.1.4.1.171.12.52.2.3.1 |
swPimInfoInterfaceThe ifIndex value of this PIM interface. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.171.12.52.2.3.1.1 |
swPimInfoAddressThe IP address of the PIM interface.ro IpAddress .1.3.6.1.4.1.171.12.52.2.3.1.2 |
swPimInfoNetMaskThe network mask for the IP address of the PIM interface.ro IpAddress .1.3.6.1.4.1.171.12.52.2.3.1.3 |
swPimInfoDesignatedRouterThe Designated Router on this PIM interface. For point-to- point interfaces, this object has the value 0.0.0.0.ro IpAddress .1.3.6.1.4.1.171.12.52.2.3.1.4 |
swPimInfoHelloIntervalThe frequency at which PIM Hello messages are transmitted on this interface.rw Integer32 .1.3.6.1.4.1.171.12.52.2.3.1.5 |
swPimInfoJoinPruneIntervalThe frequency at which PIM Join/Prune messages are transmitted on this PIM interface. The default value of this object is the pimJoinPruneInterval.rw Integer32 .1.3.6.1.4.1.171.12.52.2.3.1.6 |
swPimInfoDRPriorityThe DR Priority sets the priority of an IP interface to become the Designated router for the multiple access network. A numerically larger priority is always preferred, yet a lower number represents a higher priority. A router's knowledge of the current DR on an interface can change when a PIM Hello message is received, when a neighbor timers out, or when a router's own DR priority changes.rw Unsigned32 .1.3.6.1.4.1.171.12.52.2.3.1.7 |
swPimInfoModeThe configured mode of this PIM interface. A value of sparseDense is only valid for PIMv1.rw Enumeration .1.3.6.1.4.1.171.12.52.2.3.1.8 |
swPimInfoStateThe configured state of this PIM interface.rw Enumeration .1.3.6.1.4.1.171.12.52.2.3.1.9 |
swPimSmMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.171.12.52.3 |
swPimCbsrInfoMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.171.12.52.3.1 |
swpimCbsrBootStrapPeriodThe time interval, in seconds, for Boot Strap Messages originating from the elected BSR.rw Integer32 .1.3.6.1.4.1.171.12.52.3.1.1 |
swPimCbsrHashMaskLenThe length (in bits) of the mask to use for the hash function(This hash algorithm will be used to determine which candidate RP will be the RP for the PIM-SM network.).For IPv4 we recommend a value of 30. For IPv6 we recommand a value of 126.rw Integer32 .1.3.6.1.4.1.171.12.52.3.1.2 |
swPimCbsrTableThe PIM CBSR Table contains the candidate bootstrap router related information, such as interface name, IP address and priority. SEQUENCE OF SwPimCbsrEntry .1.3.6.1.4.1.171.12.52.3.1.3 |
swPimCbsrEntryAn entry in the PIM CBSR Table. SwPimCbsrEntry .1.3.6.1.4.1.171.12.52.3.1.3.1 |
swPimCbsrInterfaceThe ifIndex value of this PIM interface. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.171.12.52.3.1.3.1.1 |
swPimCbsrIpAddressThe IP address of this PIM interface.ro IpAddress .1.3.6.1.4.1.171.12.52.3.1.3.1.2 |
swPimCbsrSubnetMaskThe IP netmask for this PIM interface.ro IpAddress .1.3.6.1.4.1.171.12.52.3.1.3.1.3 |
swPimCbsrPriorityThe preference value for the local candidate interface to become a bootstrap router. The value of -1 is used to indicate the local candidate interface cannot become the BSR.rw Integer32 (-1..255) .1.3.6.1.4.1.171.12.52.3.1.3.1.4 |
swPimCandidateRPMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.171.12.52.3.2 |
swPimCandidateRPHoldtimeUsed to set the time CRP advertisements remain valid on the PIM-SM enabled network. If these advertisements, set here, aren't received by the BSR within this time period, the CRP will be removed from the list of candidates. 0 states to the BSR that this CRP should immediately be removed. Default: 150 seconds.rw Integer32 .1.3.6.1.4.1.171.12.52.3.2.1 |
swPimCandidateRPPriorityThis value determines the priority of a CRP to become the RP for the distribution tree. A lower value denotes a higher priority. If there is a tie for priority, the device with the highest IP address will become the RP. This information is stored in the BSR, along with the RP address and corresponding encoded group address.rw Integer32 .1.3.6.1.4.1.171.12.52.3.2.2 |
swPimCandidateRPWildcardPrefixCntThe number of enocded group addresses included in the message; indicating the group prefixes for which the C-RP is advertising. A Prefix-Cnt of '0' implies a prefix of 224.0.0.0 with mask length of 4; i.e. all multicast groups. If the C-RP is not configured with Group-prefix information, the C-RP puts a default value of '0' in this field.rw Integer32 .1.3.6.1.4.1.171.12.52.3.2.3 |
swPimCandidateRPTableThe (conceptual) table listing the IP multicast groups for which the local router is to advertise itself as a Candidate-RP when the value of pimComponentCRPHoldTime is non-zero. If this table is empty, then the local router will advertise itself as a Candidate-RP for all groups (providing the value of pimComponentCRPHoldTime is non- zero). SEQUENCE OF SwPimCandidateRPEntry .1.3.6.1.4.1.171.12.52.3.2.4 |
swPimCandidateRPEntryAn entry (conceptual row) in the pimCandidateRPTable. SwPimCandidateRPEntry .1.3.6.1.4.1.171.12.52.3.2.4.1 |
swPimCandidateRPGroupAddressThe IP multicast group address which, when combined with pimCandidateRPGroupMask, identifies a group prefix for which the local router will advertise itself as a Candidate-RP. IpAddress .1.3.6.1.4.1.171.12.52.3.2.4.1.1 |
swPimCandidateRPGroupMaskThe multicast group address mask which, when combined with pimCandidateRPGroupMask, identifies a group prefix for which the local router will advertise itself as a Candidate-RP. IpAddress .1.3.6.1.4.1.171.12.52.3.2.4.1.2 |
swPimCandidateRPInterfaceThe name of the interface which will be advertised as a Candidate-RP.rw DisplayString .1.3.6.1.4.1.171.12.52.3.2.4.1.3 |
swPimCandidateRPRowStatusThe status of this row, by which new entries may be created, or old entries deleted from this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.12.52.3.2.4.1.4 |
swPimNeighborTableThe (conceptual) table listing the router's PIM neighbors. SEQUENCE OF SwPimNeighborEntry .1.3.6.1.4.1.171.12.52.3.3 |
swPimNeighborEntryAn entry (conceptual row) in the swPimNeighborTable. SwPimNeighborEntry .1.3.6.1.4.1.171.12.52.3.3.1 |
swPimNeighborAddressThe IP address of the PIM neighbor for which to find PIM neighbor information. IpAddress .1.3.6.1.4.1.171.12.52.3.3.1.1 |
swPimNeighborIfIndexThe value of ifIndex for the interface used for which to find PIM neighbor information.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.171.12.52.3.3.1.2 |
swPimNeighborExpiryTimeThe minimum time remaining before this PIM neighbor ages out.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.171.12.52.3.3.1.3 |
swPimSptMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.171.12.52.3.4 |
swPimLastHopSptSwitchoverUsed by the last hop router to decide whether to receive the multicast data from the shared tree or switch over to the shortest path tree. When the switchover mode is set to be never, the last hop router will always receive the multicast data from the shared tree. When the mode is set to immediately, the last hop router will always receive the multicast data from the shortest path tree.rw Enumeration .1.3.6.1.4.1.171.12.52.3.4.3 |
swPimRegChksumIncDataTableThe PIM Register Checksum Including Data Table contains the PIM register checksum including data information, such as RP address and state. SEQUENCE OF SwPimRegChksumIncDataEntry .1.3.6.1.4.1.171.12.52.3.5 |
swPimRegChksumIncDataEntryAn entry in the PIM Register Checksum Including Data Table. SwPimRegChksumIncDataEntry .1.3.6.1.4.1.171.12.52.3.5.1 |
swL3SwPimRegChksumIncDataRpAddrSpecifies the RP address. IpAddress .1.3.6.1.4.1.171.12.52.3.5.1.1 |
swL3SwPimRegChksumIncDataStateThe state of register checksum including data for RPs.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.12.52.3.5.1.2 |
swPimStaticRPTableThe PIM Static RP Table contains the PIM static RP related information, such as group address, group mask, RP address and RP row status. SEQUENCE OF SwPimStaticRPEntry .1.3.6.1.4.1.171.12.52.3.6 |
swPimStaticRPEntryAn entry in the PIM Static RP Table. SwPimStaticRPEntry .1.3.6.1.4.1.171.12.52.3.6.1 |
swPimStaticRPGroupAddressThe IP multicast group address which, when combined with swPimStaticRPGroupMask, identifies a group prefix for which the local router will advertise itself as a static RP. IpAddress .1.3.6.1.4.1.171.12.52.3.6.1.1 |
swPimStaticRPGroupMaskThe multicast group address mask which, when combined with swPimStaticRPGroupAddress, identifies a group prefix for which the local router will advertise itself as a static RP. IpAddress .1.3.6.1.4.1.171.12.52.3.6.1.2 |
swPimStaticRPAddressThe (unicast) address of the interface which will be advertised as a static RP. IpAddress .1.3.6.1.4.1.171.12.52.3.6.1.3 |
swPimStaticRPRowStatusThe status of this row, by which new entries may be created, or old entries deleted from this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.171.12.52.3.6.1.4 |
swPimIpMRouteTableThe (conceptual) table listing PIM-specific information on a subset of the rows of the ipMRouteTable defined in the IP Multicast MIB. SEQUENCE OF SwPimIpMRouteEntry .1.3.6.1.4.1.171.12.52.3.7 |
swPimIpMRouteEntryAn entry (conceptual row) in the pimIpMRouteTable. There is one entry, per entry in the ipMRouteTable, whose incoming interface is running PIM. SwPimIpMRouteEntry .1.3.6.1.4.1.171.12.52.3.7.1 |
swPimIpMRouteGroupThe IP multicast group address for which this entry contains multicast routing information. IpAddress .1.3.6.1.4.1.171.12.52.3.7.1.1 |
swPimIpMRouteSourceThe network address which, when combined with the corresponding value of ipMRouteSourceMask, identifies the sources for which this entry contains multicast routing information. IpAddress .1.3.6.1.4.1.171.12.52.3.7.1.2 |
swPimIpMRouteSourceMaskThe network mask which, when combined with the corresponding value of ipMRouteSource, identifies the sources for which this entry contains multicast routing information. IpAddress .1.3.6.1.4.1.171.12.52.3.7.1.3 |
swPimIpMRouteUpstreamAssertTimerThe time remaining before the router changes its upstream neighbor back to its RPF neighbor. This timer is called the Assert timer in the PIM Sparse and Dense mode specification. A value of 0 indicates that no Assert timer has changed the upstream neighbor away from the RPF neighbor.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.171.12.52.3.7.1.4 |
swPimIpMRouteAssertMetricThe metric advertised by the assert winner on the upstream interface, or 0 if no such assert is received.ro Integer32 .1.3.6.1.4.1.171.12.52.3.7.1.5 |
swPimIpMRouteAssertMetricPrefThe preference advertised by the assert winner on the upstream interface, or 0 if no such assert is in effect.ro Integer32 .1.3.6.1.4.1.171.12.52.3.7.1.6 |
swPimIpMRouteAssertRPTBitThe value of the RPT-bit advertised by the assert winner on the upstream interface, or false if no such assert is in effect.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.171.12.52.3.7.1.7 |
swPimIpMRouteFlagsThis object describes PIM-specific flags related to a multicast state entry. See the PIM Sparse Mode specification for the meaning of the RPT and SPT bits.ro Bits .1.3.6.1.4.1.171.12.52.3.7.1.8 |
swPimIpMRouteTypeThis object describes the PIM-specific type as related to a multicast state entry.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.171.12.52.3.7.1.9 |
swPimRPSetMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.171.12.52.3.8 |
swPimRPSetBootstrapRouterSpecifies a Bootstrap Router.ro IpAddress .1.3.6.1.4.1.171.12.52.3.8.1 |
swPimRPSetTableThe (conceptual) table listing PIM information for candidate Rendezvous Points (CRPs) for IP multicast groups. When the local router is the BSR, this information is obtained from received Candidate-RP-Advertisements. When the local router is not the BSR, this information is obtained from received RP-Set messages. SEQUENCE OF SwPimRPSetEntry .1.3.6.1.4.1.171.12.52.3.8.2 |
swPimRPSetEntryAn entry (conceptual row) in the pimRPSetTable. SwPimRPSetEntry .1.3.6.1.4.1.171.12.52.3.8.2.1 |
swPimRPSetComponentA number uniquely identifying the component. Each protocol instance connected to a separate domain should have a different index value. Integer32 .1.3.6.1.4.1.171.12.52.3.8.2.1.1 |
swPimRPSetGroupAddressThe IP multicast group address which, when combined with pimRPSetGroupMask, gives the group a prefix. This prefix will determine for which entry CRP information is to be displayed, and which entry contains information about the Candidate-RP. IpAddress .1.3.6.1.4.1.171.12.52.3.8.2.1.2 |
swPimRPSetGroupMaskThe multicast group address mask which, when combined with pimRPSetGroupAddress, gives the group a prefix to determine and which entry contains which entry CRP information is to be displayed for which this entry contains information about the Candidate-RP. IpAddress .1.3.6.1.4.1.171.12.52.3.8.2.1.3 |
swPimRPSetAddressThe IP address of the Candidate-RP. IpAddress .1.3.6.1.4.1.171.12.52.3.8.2.1.4 |
swPimRPSetTypeThe type of a Candidate-RP.ro Enumeration .1.3.6.1.4.1.171.12.52.3.8.2.1.5 |