PDN-MPE-DOMAIN-MIB
Standard SNMP MIB module defining data structures for PDN-MPE-DOMAIN-MIB.
Imported Objects
Objects
18 total| Object Name |
|---|
mpePdnDomainMIBObjects OBJECT IDENTIFIER .mpe-domain.1 |
RFC1213-MIB Unknown .mpe-domain.1 |
mpePdnCardGeneralParams OBJECT IDENTIFIER .mpe-domain.1.1 |
mpePdnCardGeneralParamsTableA table that allows configuration of a Card VNID state. SEQUENCE OF MpePdnCardGeneralParamsEntry .mpe-domain.1.1.1 |
mpePdnCardGeneralParamsEntryA list of information for Card VNID. MpePdnCardGeneralParamsEntry .mpe-domain.1.1.1.1 |
mpePdnCardGeneralParamsVNIDModeThe state of VNID tagging on the card.rw VnidTaggingState (PDN-TC) .mpe-domain.1.1.1.1.1 |
mpePdnCardGeneralParamsAdditionalClientsAvailableThis object contains the current number
of unallocated client entries in the client tablero INTEGER .mpe-domain.1.1.1.1.2 |
mpePdnCardConfig OBJECT IDENTIFIER .mpe-domain.1.2 |
mpePdnCardConfigTableA table that contains information about
Mux Forwarding, IP Filtering, IP Scoping
and domain name for each VNID. SEQUENCE OF MpePdnCardConfigEntry .mpe-domain.1.2.1 |
mpePdnCardConfigEntryA list of configuration information for each VNID. MpePdnCardConfigEntry .mpe-domain.1.2.1.1 |
mpePdnCardConfigVnidIdThe VNID Id number of the virtual network for which this entry
contains management information.ro VnidRange (PDN-TC) .mpe-domain.1.2.1.1.1 |
mpePdnCardConfigDomainNameThe Domain name of the ISP for this VNID. The default value
for this object is a blank stringrw DisplayString (SNMPv2-TC) .mpe-domain.1.2.1.1.2 |
mpePdnCardConfigMuxFwdThis object shows if Mux Forwarding has been
enabled or disabled by the user.rw SwitchState (PDN-TC) .mpe-domain.1.2.1.1.3 |
mpePdnCardConfigIPFilteringThis object shows if IP Filtering has been
enabled or disabled by the user.rw SwitchState (PDN-TC) .mpe-domain.1.2.1.1.4 |
mpePdnCardConfigIPScopingThis object shows if IP Scoping has been
enabled or disabled by the user.rw SwitchState (PDN-TC) .mpe-domain.1.2.1.1.5 |
mpePdnCardConfigVnidAuthThis object shows if VNID authorization has been
enabled or disabled by the user. When this obect is
is enable, only interfaces bound to this VNID will accept
packets with this VNID.rw SwitchState (PDN-TC) .mpe-domain.1.2.1.1.6 |
mpePdnCardConfigRowStatusThis object is used to create a new row or
or delete an existing row in this tablerw RowStatus (SNMPv2-TC) .mpe-domain.1.2.1.1.7 |
mpePdnDomainMIBTraps OBJECT IDENTIFIER .mpe-domain.2 |
More MIBs from Default
Browse all DefaultMIBs →SNMP MIB module
The AVAYA-WLAN-MIB provides SNMP-based management and monitoring capabilities for Avaya wireless LAN infrastructure, enabling the collection of performance metrics such as access point status, client association counts, signal strength, and radio interface statistics. This module facilitates the tracking of WLAN-specific events and configuration parameters to support network availability and troubleshooting within Avaya wireless deployments.
The VMWARE-NSX-MIB enables SNMP-based monitoring and management of VMware NSX-T Data Center virtual network infrastructure, exposing metrics for logical switches, routers, distributed firewalls, and overlay tunnel states. It facilitates the tracking of Layer 2 through Layer 7 service instances, including access control lists, Quality of Service policies, and virtual network topology changes within the software-defined networking environment.
Standard SNMP MIB module defining data structures for 923switch.m.
Standard SNMP MIB module defining data structures for CTATX-MIB.
SNMP MIB module