PDN-MPE-ARP-MIB
Standard SNMP MIB module defining data structures for PDN-MPE-ARP-MIB.
Imported Objects
Objects
10 total| Object Name |
|---|
mpePdnNetToMediaGenericMIBObjects OBJECT IDENTIFIER .mpe-arp.1 |
SNMPv2-TC Unknown .mpe-arp.1 |
mpePdnNetTo8023MediaParams OBJECT IDENTIFIER .mpe-arp.1.1 |
mpePdnNetTo8023MediaParamsTableA table that contains ARP Parameters configuration information . SEQUENCE OF MpePdnNetTo8023MediaParamsEntry .mpe-arp.1.1.1 |
mpePdnNetTo8023MediaParamsEntryA list of information about ARP Parameters. MpePdnNetTo8023MediaParamsEntry .mpe-arp.1.1.1.1 |
mpePdnNetTo8023MediaParamsCompEntryTimeoutComplete Entry Timeout is the length of time that
a complete entry remains in the ARP table before
removal. A complete entry is one for which there is
a MAC address
ARP request. If an entry gets this old without being
referenced, it will be removed from the table. The
range for this parameter is 1 to 200000 minutes.rw INTEGER .mpe-arp.1.1.1.1.1 |
mpePdnNetTo8023MediaParamsIncompEntryTimeoutIncomplete Entry Timeout is the length of time that
an incomplete entry remains in the ARP table before
removal. An incomplete entry is one for which there
is no MAC address
but no response has been received. This is also the
amount of time that a packet will remain in the system
while waiting for address resolution. The range
for this parameter is 1 to 255 minutes.rw INTEGER .mpe-arp.1.1.1.1.2 |
mpePdnNetTo8023MediaParamsDefRouteEntryTimeoutDefault Route Entry Timeout is the length of time
a default route entry will remain in the ARP table.
If default route gets this old without being referenced,
an ARP request will be sent to the next hop router.
If no response is received, it will be removed from
the ARP table and the card will switch to the next
reachable default route with the highest preference.
The range for this parameter is 1 to 20 minutes.rw INTEGER .mpe-arp.1.1.1.1.3 |
mpePdnNetTo8023MediaConfig OBJECT IDENTIFIER .mpe-arp.1.2 |
mpePdnNetToMediaMIBTraps OBJECT IDENTIFIER .mpe-arp.2 |
More MIBs from Default
Browse all DefaultMIBs →SNMP MIB module
The AVAYA-WLAN-MIB provides SNMP-based management and monitoring capabilities for Avaya wireless LAN infrastructure, enabling the collection of performance metrics such as access point status, client association counts, signal strength, and radio interface statistics. This module facilitates the tracking of WLAN-specific events and configuration parameters to support network availability and troubleshooting within Avaya wireless deployments.
The VMWARE-NSX-MIB enables SNMP-based monitoring and management of VMware NSX-T Data Center virtual network infrastructure, exposing metrics for logical switches, routers, distributed firewalls, and overlay tunnel states. It facilitates the tracking of Layer 2 through Layer 7 service instances, including access control lists, Quality of Service policies, and virtual network topology changes within the software-defined networking environment.
Standard SNMP MIB module defining data structures for 923switch.m.
Standard SNMP MIB module defining data structures for CTATX-MIB.
SNMP MIB module