PDN-INET-MIB
Imported Objects
Objects
15 total| Object Name |
|---|
pdn-inetThis mib is used to configure ip address of some interface MODULE-IDENTITY .pdn-common.26 |
pdnInetMIBObjects OBJECT IDENTIFIER .pdn-common.26.1 |
pdnInetTelnetServerPortThis object contains the telnet server (daemon) tcp
port number.rw INTEGER .pdn-common.26.1.1 |
pdnInetFtpServerControlPortThis object contains the ftp server control (daemon) tcp
port number.rw INTEGER .pdn-common.26.1.2 |
pdnInetFtpServerDataPortThis object contains the ftp server data connection tcp
port number.rw INTEGER .pdn-common.26.1.3 |
pdnInetIpAddressTableMaxIpSubnetsThis object indicates the maximum number of entries in
the pdnInetAddressTablero Integer32 .pdn-common.26.1.4 |
pdnInetIpAddressTableCurrentIpSubnetsThis object indicates the number of entries configured in
the pdnInetAddressTablero Integer32 .pdn-common.26.1.5 |
pdnInetIpAddressTableThis table used to configure ipaddresses for an interface
which support the internet (IP) protocol SEQUENCE OF PdnInetIpAddressTableEntry .pdn-common.26.1.6 |
pdnInetIpAddressTableEntryThis object corresponds to an entry in the IP address table. PdnInetIpAddressTableEntry .pdn-common.26.1.6.1 |
pdnInetIpAddressThis object is used to configure an IP address for an interface IpAddress .pdn-common.26.1.6.1.1 |
pdnInetIpSubnetMaskThis object is used to configure an IP subnet mask for an interface.
subnet mask should result in contiguous subnetsrw IpAddress .pdn-common.26.1.6.1.2 |
pdnInetIpAddressTypeThis object is used to configure the address type for an interface
an interface can have only one primary ip address and more than one
secondary ip address. the primary ip address is essentially the
router ID. The secondary ip address would result in the interface
being multi-homed. The default value is primary type.rw Enumeration .pdn-common.26.1.6.1.3 |
pdnInetIpRowStatusThis object is used to manage rows (add/delete/modify) in this tablerw RowStatus (SNMPv2-TC) .pdn-common.26.1.6.1.4 |
pdnInetIpGatewayThis object is used to configure an gateway for an interface.rw IpAddress .pdn-common.26.1.6.1.5 |
pdnInetMIBTraps OBJECT IDENTIFIER .pdn-common.26.2 |
More MIBs from Default
Browse all DefaultMIBs →SNMP MIB module
The AVAYA-WLAN-MIB provides SNMP-based management and monitoring capabilities for Avaya wireless LAN infrastructure, enabling the collection of performance metrics such as access point status, client association counts, signal strength, and radio interface statistics. This module facilitates the tracking of WLAN-specific events and configuration parameters to support network availability and troubleshooting within Avaya wireless deployments.
The VMWARE-NSX-MIB enables SNMP-based monitoring and management of VMware NSX-T Data Center virtual network infrastructure, exposing metrics for logical switches, routers, distributed firewalls, and overlay tunnel states. It facilitates the tracking of Layer 2 through Layer 7 service instances, including access control lists, Quality of Service policies, and virtual network topology changes within the software-defined networking environment.
Standard SNMP MIB module defining data structures for 923switch.m.
Standard SNMP MIB module defining data structures for CTATX-MIB.
SNMP MIB module