Home/Catalog/PCUBE-SE-MIB

PCUBE-SE-MIB

Main SNMP MIB for Cisco's SCE OS products such as SCE2000 and SE100. This MIB provides configuration and runtime status for chassis, control modules, and line modules on the SCOS systems.
Main OID:
pcubeSeMIB.1.3.6.1.4.1.5655.2.3
330
Objects
Active
Status
5
Dependencies

Imported Objects

PCUBE-SMI
SNMPv2-TC
SNMPv2-SMI
SNMPv2-CONF
SNMP-FRAMEWORK-MIB

Objects

330 total
Object Name
pcubeSeMIBMain SNMP MIB for Cisco's SCE OS products such as SCE2000 and SE100. This MIB provides configuration and runtime status for chassis, control modules, and line modules on the SCOS systems.
MODULE-IDENTITY
.1.3.6.1.4.1.5655.2.3
pcubeSeConformance
OBJECT IDENTIFIER
.1.3.6.1.4.1.5655.2.3.1
pcubeSeGroups
OBJECT IDENTIFIER
.1.3.6.1.4.1.5655.2.3.1.1
pcubeSystemGroupSystem related inforamation.
Unknown
.1.3.6.1.4.1.5655.2.3.1.1.1
pcubeChassisGroupChassis related information.
Unknown
.1.3.6.1.4.1.5655.2.3.1.1.2
pcuebModuleGroupModule related information.
Unknown
.1.3.6.1.4.1.5655.2.3.1.1.3
pcubeLinkGroupLink related information.
Unknown
.1.3.6.1.4.1.5655.2.3.1.1.4
pcubeDiskGroupDisk related information.
Unknown
.1.3.6.1.4.1.5655.2.3.1.1.5
pcubeRdrFormatterGroupRDR-Formatter related information.
Unknown
.1.3.6.1.4.1.5655.2.3.1.1.6
pcubeLoggerGroupLogger related information.
Unknown
.1.3.6.1.4.1.5655.2.3.1.1.7
pcubeSubscribersGroupSubscriber related information.
Unknown
.1.3.6.1.4.1.5655.2.3.1.1.8
pcubeTrafficProcessorGroupTraffic processors related information.
Unknown
.1.3.6.1.4.1.5655.2.3.1.1.9
pcubePortGroupPorts related information.
Unknown
.1.3.6.1.4.1.5655.2.3.1.1.10
pcubeTxQueuesGroupTx queue related information
Unknown
.1.3.6.1.4.1.5655.2.3.1.1.11
pcubeGlobalControllersGroupGlobal controllers related information.
Unknown
.1.3.6.1.4.1.5655.2.3.1.1.12
pcubeApplicationGroupApplication related information.
Unknown
.1.3.6.1.4.1.5655.2.3.1.1.13
pcubeTrafficCountersGroupTraffic counter related information.
Unknown
.1.3.6.1.4.1.5655.2.3.1.1.14
pcubeAttackGroupAttacks related information.
Unknown
.1.3.6.1.4.1.5655.2.3.1.1.15
pcubeVasTrafficForwardingGroupVAS traffic forwarding related information.
Unknown
.1.3.6.1.4.1.5655.2.3.1.1.16
pcubeMplsVpnAutoLearnGroupMPLS VPN auto learning related information.
Unknown
.1.3.6.1.4.1.5655.2.3.1.1.17
pcubeTrapObjectsGroupNotifications' objects group.
Unknown
.1.3.6.1.4.1.5655.2.3.1.1.18
pcubeSeCompliances
OBJECT IDENTIFIER
.1.3.6.1.4.1.5655.2.3.1.2
pcubeComplianceA compliance statement defined in this MIB module, for SCE SNMP agents. with old deprectated groups. This compliance includes deprecated groups.deprecated
Unknown
.1.3.6.1.4.1.5655.2.3.1.2.1
pcubeComplianceRev1A compliance statement defined in this MIB module, for SCE SNMP agents.
Unknown
.1.3.6.1.4.1.5655.2.3.1.2.2
pcubeSeEventsGroupPcube notifications. Contains deprecated objects.deprecated
Unknown
.1.3.6.1.4.1.5655.2.3.1.3
pcubeSeEventsGroupRev1Pcube notifications.
Unknown
.1.3.6.1.4.1.5655.2.3.1.4
pcubeSeEvents
OBJECT IDENTIFIER
.1.3.6.1.4.1.5655.4.0
operationalStatusOperationalTrapOperationalStatusOperational notification signifies that the agent entity has detected the sysOperationalStatus object in this MIB has changed to 'operational(3)'.
NOTIFICATION-TYPE
.1.3.6.1.4.1.5655.4.0.1
operationalStatusWarningTrapOperationalStatusWarning notification signifies that the agent entity has detected the sysOperationalStatus object in this MIB has changed to 'warning(4)'.
NOTIFICATION-TYPE
.1.3.6.1.4.1.5655.4.0.2
operationalStatusFailureTrapOperationalStatusFailure notification signifies that the agent entity has detected the sysOperationalStatus object in this MIB has changed to 'failure(5)'.
NOTIFICATION-TYPE
.1.3.6.1.4.1.5655.4.0.3
systemResetTrapA systemReset notification signifies that the agent entity is about to reset itself either per user's request or due to a fatal event.
NOTIFICATION-TYPE
.1.3.6.1.4.1.5655.4.0.4
chassisTempAlarmOnTrapA chassisTempAlarmOn notification signifies that the agent entity has detected the chassisTempAlarm object in this MIB has changed to the 'on(3)' state (temperature is too high).
NOTIFICATION-TYPE
.1.3.6.1.4.1.5655.4.0.5
chassisTempAlarmOffTrapA chassisTempAlarmOff notification signifies that the agent entity has detected the chassisTempAlarm object in this MIB has changed to the 'off(2)' state (temperature level is back to normal).
NOTIFICATION-TYPE
.1.3.6.1.4.1.5655.4.0.6
chassisVoltageAlarmOnTrapA chassisVoltageAlarmOn notification signifies that the agent entity has detected the chassisVoltageAlarm object in this MIB has changed to the 'on(3)' state (voltage level is too high).
NOTIFICATION-TYPE
.1.3.6.1.4.1.5655.4.0.7
chassisFansAlarmOnTrapA chassisFanStatusFailure notification signifies that the agent entity has detected the chassisFansAlarm object in this MIB has changed to the 'on(3)' state.
NOTIFICATION-TYPE
.1.3.6.1.4.1.5655.4.0.8
chassisPowerSupplyAlarmOnTrapA chassisPsuStatusFailure notification signifies that the agent entity has detected the chassisPowerSupplyAlarm object in this MIB has changed to the 'on(3)' state.
NOTIFICATION-TYPE
.1.3.6.1.4.1.5655.4.0.9
rdrActiveConnectionTrapRdrConnectionDestTypeActive notification signifies that the agent entity has detected the rdrFormatterDestStatus object in this MIB has changed to the 'active(2)' state.
NOTIFICATION-TYPE
.1.3.6.1.4.1.5655.4.0.10
rdrNoActiveConnectionTrapA rdrNoActiveConnection notification signifies that the agent entity has detected there is no active connection between the RDR-formatter and any Data Collector.
NOTIFICATION-TYPE
.1.3.6.1.4.1.5655.4.0.11
rdrConnectionUpTrapRdrConnectionStatusUp notification signifies that the agent entity has detected the rdrFormatterDestConnectionStatus object in this MIB has changed to 'up(2)'.
NOTIFICATION-TYPE
.1.3.6.1.4.1.5655.4.0.12
rdrConnectionDownTrapRdrConnectionStatusDown notification signifies that the agent entity has detected the rdrFormatterDestConnectionStatus object in this MIB has changed to 'down(3)'.
NOTIFICATION-TYPE
.1.3.6.1.4.1.5655.4.0.13
telnetSessionStartedTrapReplaced by the more generic sessionStartedTrap.deprecated
NOTIFICATION-TYPE
.1.3.6.1.4.1.5655.4.0.14
telnetSessionEndedTrapReplaced by the more generic sessionEndedTrap.deprecated
NOTIFICATION-TYPE
.1.3.6.1.4.1.5655.4.0.15
telnetSessionDeniedAccessTrapReplaced by the more generic sessionDeniedAccessTrap.deprecated
NOTIFICATION-TYPE
.1.3.6.1.4.1.5655.4.0.16
telnetSessionBadLoginTrapReplaced by the more generic sessionBadLoginTrap.deprecated
NOTIFICATION-TYPE
.1.3.6.1.4.1.5655.4.0.17
loggerUserLogIsFullTrapA loggerUserLogIsFull notification signifies that the agent entity has detected the User log file is full. In such case the agent entity rolls to the next file.
NOTIFICATION-TYPE
.1.3.6.1.4.1.5655.4.0.18
sntpClockDriftWarnTrapAn sntpClockDriftWarn notification signifies that the entity's SNTP agent did not receive time update for a long period, this may cause a time drift.
NOTIFICATION-TYPE
.1.3.6.1.4.1.5655.4.0.19
linkModeBypassTrapA linkModeBypass notification signifies that the agent entity has detected that the linkOperMode object in this MIB has changed to 'bypass(2)'.
NOTIFICATION-TYPE
.1.3.6.1.4.1.5655.4.0.20
linkModeForwardingTrapA linkModeForwarding notification signifies that the agent entity has detected that the linkOperMode object in this MIB has changed to 'forwarding(3)'.
NOTIFICATION-TYPE
.1.3.6.1.4.1.5655.4.0.21
linkModeCutoffTrapA linkModeCutoff notification signifies that the agent entity has detected that the linkOperMode object in this MIB has changed to 'cutoff(4)'.
NOTIFICATION-TYPE
.1.3.6.1.4.1.5655.4.0.22
pcubeSeEventGenericString1Temporary string used for traps. Always returns an empty string.ro
SnmpAdminString (SNMP-FRAMEWORK-MIB)
.1.3.6.1.4.1.5655.4.0.23
pcubeSeEventGenericString2Temporary string used for traps. Always returns an empty string.ro
SnmpAdminString (SNMP-FRAMEWORK-MIB)
.1.3.6.1.4.1.5655.4.0.24
moduleAttackFilterActivatedTrapA moduleAttackFilterActivated notification signifies that the agent entity's attack filter module has activated a filter. The pcubeSeEventGenericString1 is the type of attack-filter, which was activated.
NOTIFICATION-TYPE
.1.3.6.1.4.1.5655.4.0.25
moduleAttackFilterDeactivatedTrapA portAttackFilterDeactivated notification signifies that the agent entity's attack filter module has removed a filter that was previously activated. The pcubeSeEventGenericString1 is the attack-filter type, which was sent in the corresponding moduleAttackFilterActivatedTrap. the pcubeSeEventGenericString2 is the reason for deactivating the filter.
NOTIFICATION-TYPE
.1.3.6.1.4.1.5655.4.0.26
moduleEmAgentGenericTrapA generic notification used by the P-Cube EM agent. pcubeSeEventGenericString1 specifies what notification is it, and pcubeSeEventGenericString2 is the relevant parameter.
NOTIFICATION-TYPE
.1.3.6.1.4.1.5655.4.0.27
linkModeSniffingTrapA linkModeSniffing notification signifies that the agent entity has detected that the linkOperMode object in this MIB has changed to 'sniffing(5)'.
NOTIFICATION-TYPE
.1.3.6.1.4.1.5655.4.0.28
moduleRedundancyReadyTrapA moduleRedundancyReady notification signifies that the module was able to connect and synchronize with a redundant entity, and is now ready to handle fail-over if needed.
NOTIFICATION-TYPE
.1.3.6.1.4.1.5655.4.0.29
moduleRedundantConfigurationMismatchTrapA moduleRedundantConfigurationMismatch notification signifies that the module was not able to synchronize with a redundant entity, due to a essential configuration parameters that are do not match between the module and the redundant entity.
NOTIFICATION-TYPE
.1.3.6.1.4.1.5655.4.0.30
moduleLostRedundancyTrapA moduleLostRedundancy notification signifies that the module has lost the ability to perform the fail-over procedure.
NOTIFICATION-TYPE
.1.3.6.1.4.1.5655.4.0.31
moduleSmConnectionDownTrapA moduleSmConnectionDown notification signifies that the module's virtual connection to the subscriber manager is broken.
NOTIFICATION-TYPE
.1.3.6.1.4.1.5655.4.0.32
moduleSmConnectionUpTrapA moduleSmConnectionUp notification signifies that the module's virtual connection to the subscriber manager is up and working.
NOTIFICATION-TYPE
.1.3.6.1.4.1.5655.4.0.33
moduleOperStatusChangeTrapA moduleOperStatusChangeTrap notification signifies that the moduleOperStatus has changed its value.
NOTIFICATION-TYPE
.1.3.6.1.4.1.5655.4.0.34
portOperStatusChangeTrapA portOperStatusChangeTrap notification signifies that the portOperStatus object of the portIndex has changed its value, i.e., the link was forced down or the force down was released.
NOTIFICATION-TYPE
.1.3.6.1.4.1.5655.4.0.35
chassisLineFeedAlarmOnTrapA chassisLineFeedAlarmOn notification signifies that the agent entity has detected the chassisLineFeed object in this MIB has changed to the 'on(3)' state.
NOTIFICATION-TYPE
.1.3.6.1.4.1.5655.4.0.36
rdrFormatterCategoryDiscardingReportsTraprdrCategoryDiscardingReportsTrap notification signifies that the agent entity has detected that reports send to this category are being discarded. The rdrFormatterCategoryNumReportsDiscarded object in this MIB is counting the amount of discarded reports.
NOTIFICATION-TYPE
.1.3.6.1.4.1.5655.4.0.37
rdrFormatterCategoryStoppedDiscardingReportsTraprdrCategoryStoppedDiscardingReportsTrap notification signifies that the agent entity has detected that reports send to this category are not being discarded any more. The rdrFormatterCategoryNumReportsDiscarded object in this MIB is counting the amount of discarded reports.
NOTIFICATION-TYPE
.1.3.6.1.4.1.5655.4.0.38
sessionStartedTrapA sessionStarted notification signifies that the agent entity has accepted a new session. The pcubeSeEventGenericString1 is the session type (telnet/SSH) and client IP address.
NOTIFICATION-TYPE
.1.3.6.1.4.1.5655.4.0.39
sessionEndedTrapA sessionEnded notification signifies that the agent entity has detected end of a session. The pcubeSeEventGenericString1 is the session type (telnet/SSH) and client IP address.
NOTIFICATION-TYPE
.1.3.6.1.4.1.5655.4.0.40
sessionDeniedAccessTrapA sessionDeniedAccess notification signifies that the agent entity has refused a session from unauthorized source. The pcubeSeEventGenericString1 is the session type (telnet/SSH) and client IP address.
NOTIFICATION-TYPE
.1.3.6.1.4.1.5655.4.0.41
sessionBadLoginTrapA sessionBadLogin notification signifies that the agent entity has detected attempt to login with a wrong password. The pcubeSeEventGenericString1 is the session type (telnet/SSH) and client IP address.
NOTIFICATION-TYPE
.1.3.6.1.4.1.5655.4.0.42
illegalSubscriberMappingTrapA illegalSubscriberMappingTrap notification signifies that some external entity has attempted to create illegal or inconsistent subscriber mappings. The pcubeSeEventGenericString1 contains a message describing the problem.
NOTIFICATION-TYPE
.1.3.6.1.4.1.5655.4.0.43
loggerLineAttackLogFullTrapSignifies that the agent entity has detected the line-attack log file is full. In such case the agent entity rolls to the next file.
NOTIFICATION-TYPE
.1.3.6.1.4.1.5655.4.0.44
vasServerOpertionalStatusChangeTrapSignifies that the agent entity has detected that the vas server operational status has changed.
NOTIFICATION-TYPE
.1.3.6.1.4.1.5655.4.0.45
pullRequestNumberUsed only for traps to signify the number of pull requests issued so far for the anonymous subscriber given in the pullRequestRetryFailedTrap containing notification. A direct get will always returns 0.ro
Integer32
.1.3.6.1.4.1.5655.4.0.46
pullRequestRetryFailedTrapSignifies that an unknown subscriber wasn't identified after a certain number of pull requests. The value of pcubeSeEventGenericString1 is the subscriber id and the pullRequestNumber is the number of pull requests made on this sub.
NOTIFICATION-TYPE
.1.3.6.1.4.1.5655.4.0.47
mplsVpnTotalHWMappingsThresholdExceededTrapSent when the value of mplsVpnCurrentHWMappings exceeds the allowed threshold.
NOTIFICATION-TYPE
.1.3.6.1.4.1.5655.4.0.48
pcubeSEObjs
OBJECT IDENTIFIER
.1.3.6.1.4.1.5655.4.1
systemGrp
OBJECT IDENTIFIER
.1.3.6.1.4.1.5655.4.1.1
sysOperationalStatusIndicates the operational status of the system.ro
Enumeration
.1.3.6.1.4.1.5655.4.1.1.1
sysFailureRecoveryIndicates if the system should enter a Failure mode after abnormal boot.ro
Enumeration
.1.3.6.1.4.1.5655.4.1.1.2
sysVersionThe system version.ro
SnmpAdminString (SNMP-FRAMEWORK-MIB)
.1.3.6.1.4.1.5655.4.1.1.3
pchassisGrp
OBJECT IDENTIFIER
.1.3.6.1.4.1.5655.4.1.2
pchassisSysTypeThe chassis system type.ro
Enumeration
.1.3.6.1.4.1.5655.4.1.2.1
pchassisPowerSupplyAlarmIndicates if the power supply to the chassis is normal. If the status is not 'ok' it means that one or more power supplies are not functional.ro
Enumeration
.1.3.6.1.4.1.5655.4.1.2.2
pchassisFansAlarmIndicates if all the fans on the chassis are functional.ro
Enumeration
.1.3.6.1.4.1.5655.4.1.2.3
pchassisTempAlarmThe chassis temperature alarm status.ro
Enumeration
.1.3.6.1.4.1.5655.4.1.2.4
pchassisVoltageAlarmThe chassis internal voltage alarm status. If the alarm is 'on' it indicates that the voltage level of one or more HW units is not in the normal range.ro
Enumeration
.1.3.6.1.4.1.5655.4.1.2.5
pchassisNumSlotsIndicates the number of slots in the chassis available for plug-in modules. This number counts slots that are already occupied as well as empty slots.ro
Integer32
.1.3.6.1.4.1.5655.4.1.2.6
pchassisSlotConfigAn indication of which slots in the chassis have modules inserted. This is an integer value with bits set to indicate configured modules. It can be interpreted as a sum of f(x) as x goes from 1 to the number of slots, where f(x) = 0 for no module inserted and f(x) = exp(2, x-1) for a module inserted.ro
Integer32
.1.3.6.1.4.1.5655.4.1.2.7
pchassisPsuTypeIndicates the type of the power supplies.ro
Enumeration
.1.3.6.1.4.1.5655.4.1.2.8
pchassisLineFeedAlarmIndicates if the line feed to the chassis is normal. If the status is not 'ok' it means that one or more line feeds are not connected or have no power.ro
Enumeration
.1.3.6.1.4.1.5655.4.1.2.10
pmoduleGrp
OBJECT IDENTIFIER
.1.3.6.1.4.1.5655.4.1.3
pmoduleTableA list of module entries. The number of entries is the number of modules in the chassis.
SEQUENCE OF PmoduleEntry
.1.3.6.1.4.1.5655.4.1.3.1
pmoduleEntryEntry containing information about one module in the chassis.
PmoduleEntry
.1.3.6.1.4.1.5655.4.1.3.1.1
pmoduleIndexA unique value for each module within the chassis.ro
Integer32
.1.3.6.1.4.1.5655.4.1.3.1.1.1
pmoduleTypeThe type of module.ro
Enumeration
.1.3.6.1.4.1.5655.4.1.3.1.1.2
pmoduleNumTrafficProcessorsThe number of traffic processors supported by this module.ro
Integer32
.1.3.6.1.4.1.5655.4.1.3.1.1.3
pmoduleSlotNumThis value is determined by the chassis slot number where this module is located. Valid entries are 1 to the value of chassisNumSlots.ro
Integer32
.1.3.6.1.4.1.5655.4.1.3.1.1.4
pmoduleHwVersionThe hardware version of the module.ro
SnmpAdminString (SNMP-FRAMEWORK-MIB)
.1.3.6.1.4.1.5655.4.1.3.1.1.5
pmoduleNumPortsThe number of ports supported by this module.ro
Integer32
.1.3.6.1.4.1.5655.4.1.3.1.1.6
pmoduleConnectionModeIndicates the connection mode of a module.ro
Enumeration
.1.3.6.1.4.1.5655.4.1.3.1.1.8
pmoduleSerialNumberIndicates the serial number of the module.ro
SnmpAdminString (SNMP-FRAMEWORK-MIB)
.1.3.6.1.4.1.5655.4.1.3.1.1.9
pmoduleUpStreamAttackFilteringTimeIndicates the accumulated time which attack up-stream traffic was filtered.ro
TimeTicks UNITS "milliseconds"
.1.3.6.1.4.1.5655.4.1.3.1.1.10
pmoduleUpStreamLastAttackFilteringTimeIndicates the time since the previous attack was filtered in the up-stream traffic.ro
TimeTicks UNITS "milliseconds"
.1.3.6.1.4.1.5655.4.1.3.1.1.11
pmoduleDownStreamAttackFilteringTimeIndicates the accumulated time which attack down-stream traffic was filtered.ro
TimeTicks UNITS "milliseconds"
.1.3.6.1.4.1.5655.4.1.3.1.1.12
pmoduleDownStreamLastAttackFilteringTimeIndicates the time since the previous attack was filtered in the down-stream traffic.ro
TimeTicks UNITS "milliseconds"
.1.3.6.1.4.1.5655.4.1.3.1.1.13
pmoduleAttackObjectsClearTimeIndicates the time since the attack objects were cleared. Writing a 0 to this object causes the counters to be cleared.rw
TimeTicks UNITS "milliseconds"
.1.3.6.1.4.1.5655.4.1.3.1.1.14
pmoduleAdminStatusIndicates configuration of a module in respect to whether the module should handle traffic.ro
Enumeration
.1.3.6.1.4.1.5655.4.1.3.1.1.15
pmoduleOperStatusIndicates current module's role in respect to whether the module handles traffic.ro
Enumeration
.1.3.6.1.4.1.5655.4.1.3.1.1.16
linkGrp
OBJECT IDENTIFIER
.1.3.6.1.4.1.5655.4.1.4
linkTableThe Link table provides information regarding the configuration and status of the links that pass through the SE and carry inband traffic. The number of entries in this table is determined by the number of modules in the chassis and the number of links on each module.
SEQUENCE OF LinkEntry
.1.3.6.1.4.1.5655.4.1.4.1
linkEntryEntry containing information about the Link.
LinkEntry
.1.3.6.1.4.1.5655.4.1.4.1.1
linkModuleIndexAn index value that uniquely identifies the module where this link is located.ro
Integer32
.1.3.6.1.4.1.5655.4.1.4.1.1.1
linkIndexAn index value that uniquely identifies this link within a module. Valid entries are 1 to the value of moduleNumLinks for this module.ro
Integer32
.1.3.6.1.4.1.5655.4.1.4.1.1.2
linkAdminModeOnActiveThe desired mode of the link when the module's operating status is Active and the module is not in boot or failure. The possible modes are bypass, forwarding and sniffing. In bypass mode the traffic is forwarded from one port to the other using an internal splitter. In forwarding mode the traffic is forwarded through the internal hardware and software modules of the SE. In sniffing mode the traffic is passed in the same manner as in bypass mode, however a copy of the traffic is made and analyzed internally in the box.ro
LinkModeType
.1.3.6.1.4.1.5655.4.1.4.1.1.3
linkAdminModeOnFailureThe desired mode of the link when the system's operational status is Failure. The possible modes are Bypass and Cutoff. In Bypass mode the traffic is forwarded from one port to the other using an internal splitter. In Cutoff mode the traffic is dropped by the SE.ro
LinkModeType
.1.3.6.1.4.1.5655.4.1.4.1.1.4
linkOperModeThe operational mode of the link. In Bypass mode the traffic is forwarded from one port to the other using an internal splitter. In Forwarding mode the traffic is forwarded through the internal software and hardware modules of the SCE. In Sniffing mode the traffic is forwarded in the same manner as in Bypass mode, however the traffic is passed through the internal software and hardware modules of the SCE for analyzing. in Cutoff mode the traffic is dropped by the SCE platform.ro
LinkModeType
.1.3.6.1.4.1.5655.4.1.4.1.1.5
linkStatusReflectionEnableIndicates if failure of the physical link on one i/f should trigger the failure of the link on the other i/f.ro
Enumeration
.1.3.6.1.4.1.5655.4.1.4.1.1.6
linkSubscriberSidePortIndexAn index value that uniquely identifies this link with its related port that is connected to the subscriber side.ro
Integer32
.1.3.6.1.4.1.5655.4.1.4.1.1.7
linkNetworkSidePortIndexAn index value that uniquely identifies this link with its related port that is connected to the network side.ro
Integer32
.1.3.6.1.4.1.5655.4.1.4.1.1.8
diskGrp
OBJECT IDENTIFIER
.1.3.6.1.4.1.5655.4.1.5
diskNumUsedBytesThe number of used bytes.ro
Unsigned32
.1.3.6.1.4.1.5655.4.1.5.1
diskNumFreeBytesThe number of free bytes.ro
Unsigned32
.1.3.6.1.4.1.5655.4.1.5.2
rdrFormatterGrp
OBJECT IDENTIFIER
.1.3.6.1.4.1.5655.4.1.6
rdrFormatterEnableIndicates whether the RDR-formatter is enabled or disabled. When the RDR-formatter is enabled, it sends the reports it gets from the traffic processors to the Data Collector as defined in the rdrFormatterDestTable.ro
Enumeration
.1.3.6.1.4.1.5655.4.1.6.1
rdrFormatterDestTableThe RDR-formatter destinations table (0 to 3 entries). This table lists the addresses of Data Collectors. If the RDR-formatter is enabled, the destination with the highest priority that a TCP connection to it can be established would receive the reports generated by the traffic processors.
SEQUENCE OF RdrFormatterDestEntry
.1.3.6.1.4.1.5655.4.1.6.2
rdrFormatterDestEntryA destination table entry.
RdrFormatterDestEntry
.1.3.6.1.4.1.5655.4.1.6.2.1
rdrFormatterDestIPAddrThe IP address of a Data Collector.ro
IpAddress
.1.3.6.1.4.1.5655.4.1.6.2.1.1
rdrFormatterDestPortThe TCP port on which the Data Collector listens.ro
Integer32
.1.3.6.1.4.1.5655.4.1.6.2.1.2
rdrFormatterDestPriorityThe priority given to the Data Collector. The active Data Collector is the Data Collector with the highest priority and a TCP connection that is up.ro
Integer32
.1.3.6.1.4.1.5655.4.1.6.2.1.3
rdrFormatterDestStatusIn 'redundancy(2)' and in 'simpleLoadBalancing(3)' rdrFormatterForwardingMode there can be only one 'active' destination, which is where the reports are currently being sent to. In 'multicast(4)' modes all destinations will receive the active(2) status.ro
Enumeration
.1.3.6.1.4.1.5655.4.1.6.2.1.4
rdrFormatterDestConnectionStatusIndicates the status of TCP connection to this destination.ro
Enumeration
.1.3.6.1.4.1.5655.4.1.6.2.1.5
rdrFormatterDestNumReportsSentIndicates the number of reports sent by the RDR-formatter to this destination.ro
Unsigned32
.1.3.6.1.4.1.5655.4.1.6.2.1.6
rdrFormatterDestNumReportsDiscardedIndicates the number of reports dropped by the RDR-formatter on this destination.ro
Unsigned32
.1.3.6.1.4.1.5655.4.1.6.2.1.7
rdrFormatterDestReportRateIndicates the rate of the reports (in reports per second) currently sent to this destination.ro
Unsigned32
.1.3.6.1.4.1.5655.4.1.6.2.1.8
rdrFormatterDestReportRatePeakIndicates the maximum report rate sent to this destination.ro
Unsigned32
.1.3.6.1.4.1.5655.4.1.6.2.1.9
rdrFormatterDestReportRatePeakTimeIndicates the time since the rdrFormatterDestReportRatePeak value occurred.ro
TimeTicks UNITS "milliseconds"
.1.3.6.1.4.1.5655.4.1.6.2.1.10
rdrFormatterNumReportsSentIndicates the number of reports sent by the RDR-formatter.ro
Unsigned32
.1.3.6.1.4.1.5655.4.1.6.3
rdrFormatterNumReportsDiscardedIndicates the number of reports dropped by the RDR-formatter.ro
Unsigned32
.1.3.6.1.4.1.5655.4.1.6.4
rdrFormatterClearCountersTimeThe time since RDR-formatter counters were last cleared. Writing a 0 to this object causes the RDR-formatter counters to be cleared.rw
TimeTicks UNITS "milliseconds"
.1.3.6.1.4.1.5655.4.1.6.5
rdrFormatterReportRateIndicates the rate of the reports (in reports per second) currently sent to all of the destinations.ro
Unsigned32
.1.3.6.1.4.1.5655.4.1.6.6
rdrFormatterReportRatePeakIndicates the maximum report rate sent to all of the destinations.ro
Unsigned32
.1.3.6.1.4.1.5655.4.1.6.7
rdrFormatterReportRatePeakTimeIndicates the time since the rdrFormatterReportRatePeak value occurred.ro
TimeTicks UNITS "milliseconds"
.1.3.6.1.4.1.5655.4.1.6.8
rdrFormatterProtocolIndicates the RDR protocol currently in use.ro
Enumeration
.1.3.6.1.4.1.5655.4.1.6.9
rdrFormatterForwardingModeIndicates the mode of how the RDR formatter sends the reports to its destinations.ro
Enumeration
.1.3.6.1.4.1.5655.4.1.6.10
rdrFormatterCategoryTableThe RDR-formatter Category table. Describes the different categories of RDRs and RDR destination groups.
SEQUENCE OF RdrFormatterCategoryEntry
.1.3.6.1.4.1.5655.4.1.6.11
rdrFormatterCategoryEntryA category table entry.
RdrFormatterCategoryEntry
.1.3.6.1.4.1.5655.4.1.6.11.1
rdrFormatterCategoryIndexThe category number.ro
Integer32
.1.3.6.1.4.1.5655.4.1.6.11.1.1
rdrFormatterCategoryNameThe name given to this category.ro
SnmpAdminString (SNMP-FRAMEWORK-MIB)
.1.3.6.1.4.1.5655.4.1.6.11.1.2
rdrFormatterCategoryNumReportsSentIndicates the number of reports sent by the RDR-formatter to this category.ro
Unsigned32
.1.3.6.1.4.1.5655.4.1.6.11.1.3
rdrFormatterCategoryNumReportsDiscardedIndicates the number of reports dropped by the RDR-formatter on this category.ro
Unsigned32
.1.3.6.1.4.1.5655.4.1.6.11.1.4
rdrFormatterCategoryReportRateIndicates the rate of the reports (in reports per second) currently sent to this category.ro
Unsigned32
.1.3.6.1.4.1.5655.4.1.6.11.1.5
rdrFormatterCategoryReportRatePeakIndicates the maximum report rate sent to this category.ro
Unsigned32
.1.3.6.1.4.1.5655.4.1.6.11.1.6
rdrFormatterCategoryReportRatePeakTimeIndicates the time since the rdrFormatterCategoryReportRatePeak value occurred.ro
TimeTicks UNITS "milliseconds"
.1.3.6.1.4.1.5655.4.1.6.11.1.7
rdrFormatterCategoryNumReportsQueuedIndicates the amount of pending reports in this category.ro
Unsigned32
.1.3.6.1.4.1.5655.4.1.6.11.1.8
rdrFormatterCategoryDestTableThe RDR-formatter Category destinations table. This table lists the addresses of Data Collectors. If the RDR-formatter is enabled, the destination with the highest priority that a TCP connection to it can be established would receive the reports generated by the traffic processors.
SEQUENCE OF RdrFormatterCategoryDestEntry
.1.3.6.1.4.1.5655.4.1.6.12
rdrFormatterCategoryDestEntryA destination table entry.
RdrFormatterCategoryDestEntry
.1.3.6.1.4.1.5655.4.1.6.12.1
rdrFormatterCategoryDestPriorityThe priority given to the Data Collector for this category. The active Data Collector is the Data Collector with the highest priority and a TCP connection that is up.ro
Integer32
.1.3.6.1.4.1.5655.4.1.6.12.1.1
rdrFormatterCategoryDestStatusIn modes 'redundancy(2)' and in 'simpleLoadBalancing(3)' there can be only one 'active' destination, which is the destination to which reports are being sent. In 'multicast(4)' modes all destination will receive the 'active(2)' status.ro
Enumeration
.1.3.6.1.4.1.5655.4.1.6.12.1.2
loggerGrp
OBJECT IDENTIFIER
.1.3.6.1.4.1.5655.4.1.7
loggerUserLogEnableIndicates whether the logging of user information is enabled or disabled.ro
Enumeration
.1.3.6.1.4.1.5655.4.1.7.1
loggerUserLogNumInfoIndicates the number of Info messages logged into the user log file since last reboot or last time the counter was cleared.ro
Unsigned32
.1.3.6.1.4.1.5655.4.1.7.2
loggerUserLogNumWarningIndicates the number of Warning messages logged into the user log file since last reboot or last time the counter was cleared.ro
Unsigned32
.1.3.6.1.4.1.5655.4.1.7.3
loggerUserLogNumErrorIndicates the number of Error messages logged into the user log file since last reboot or last time the counter was cleared.ro
Unsigned32
.1.3.6.1.4.1.5655.4.1.7.4
loggerUserLogNumFatalIndicates the number of Fatal messages logged into the User-Log since last reboot or last time the counter was cleared.ro
Unsigned32
.1.3.6.1.4.1.5655.4.1.7.5
loggerUserLogClearCountersTimeThe time since user log counters were last cleared. Writing a 0 to this object causes the user log counters to be cleared.rw
TimeTicks UNITS "milliseconds"
.1.3.6.1.4.1.5655.4.1.7.6
subscribersGrp
OBJECT IDENTIFIER
.1.3.6.1.4.1.5655.4.1.8
subscribersInfoTableThe subscribers information table consists of data regarding subscribers management operations performed.
SEQUENCE OF SubscribersInfoEntry
.1.3.6.1.4.1.5655.4.1.8.1
subscribersInfoEntryA SubscribersInfoEntry entry.
SubscribersInfoEntry
.1.3.6.1.4.1.5655.4.1.8.1.1
subscribersNumIntroducedIndicates the current number of subscribers introduced to the SCE. These subscribers may or may not have IP address or VLAN mappings. Subscribers who do not have mappings of any kind cannot be associated with traffic, thus will be served by the SCE according to the default settings.ro
Unsigned32
.1.3.6.1.4.1.5655.4.1.8.1.1.1
subscribersNumFreeIndicates the number of subscribers that may be introduced in addition to the subscribers that are already introduced to the SCE (subscribersNumIntroduced).ro
Unsigned32
.1.3.6.1.4.1.5655.4.1.8.1.1.2
subscribersNumIpAddrMappingsIndicates the current number of 'IP address to subscriber' mappings.ro
Unsigned32
.1.3.6.1.4.1.5655.4.1.8.1.1.3
subscribersNumIpAddrMappingsFreeIndicates the number of free 'IP address to subscriber' mappings that may be used for defining new mappings.ro
Unsigned32
.1.3.6.1.4.1.5655.4.1.8.1.1.4
subscribersNumIpRangeMappingsIndicates the current number of 'IP-range to subscriber' mappings.ro
Unsigned32
.1.3.6.1.4.1.5655.4.1.8.1.1.5
subscribersNumIpRangeMappingsFreeIndicates the number of free 'IP-range to subscriber' mappings that may be used for defining new mappings.ro
Unsigned32
.1.3.6.1.4.1.5655.4.1.8.1.1.6
subscribersNumVlanMappingsIndicates the current number of VLAN to subscribers mappings.ro
Unsigned32
.1.3.6.1.4.1.5655.4.1.8.1.1.7
subscribersNumVlanMappingsFreeIndicates the number of free 'VLAN to subscriber' mappings that may be used for defining new mappings.ro
Unsigned32
.1.3.6.1.4.1.5655.4.1.8.1.1.8
subscribersNumActiveIndicates the current number of active subscribers, these subscribers necessarily have an IP address or VLAN mappings that define the traffic that should be associated and served according to the subscriber service agreement.ro
Unsigned32
.1.3.6.1.4.1.5655.4.1.8.1.1.9
subscribersNumActivePeakIndicates the peak value of subscribersNumActive since the last time it was cleared or the system started.ro
Unsigned32
.1.3.6.1.4.1.5655.4.1.8.1.1.10
subscribersNumActivePeakTimeIndicates the time since the subscribersNumActivePeak value occurred.ro
TimeTicks UNITS "milliseconds"
.1.3.6.1.4.1.5655.4.1.8.1.1.11
subscribersNumUpdatesIndicates the accumulated number of subscribers database updates received by the SCE.ro
Unsigned32
.1.3.6.1.4.1.5655.4.1.8.1.1.12
subscribersCountersClearTimeIndicates the time since the subscribers counters were cleared. Writing a 0 to this object causes the counters to be cleared.rw
TimeTicks UNITS "milliseconds"
.1.3.6.1.4.1.5655.4.1.8.1.1.13
subscribersNumTpIpRangesIndicates the current number of 'Traffic Processor IP ranges' used.ro
Unsigned32
.1.3.6.1.4.1.5655.4.1.8.1.1.14
subscribersNumTpIpRangesFreeIndicates the number of free 'Traffic Processor IP ranges'.ro
Unsigned32
.1.3.6.1.4.1.5655.4.1.8.1.1.15
subscribersNumAnonymousIndicates the current number of anonymous subscribers.ro
Unsigned32
.1.3.6.1.4.1.5655.4.1.8.1.1.16
subscribersNumWithSessionsIndicates the current number of subscribers with open sessions.ro
Unsigned32
.1.3.6.1.4.1.5655.4.1.8.1.1.17
subscribersPropertiesTableThe subscribers properties table provides the list of properties available for each subscriber.
SEQUENCE OF SubscribersPropertiesEntry
.1.3.6.1.4.1.5655.4.1.8.2
subscribersPropertiesEntryA subscribersPropertiesTable entry.
SubscribersPropertiesEntry
.1.3.6.1.4.1.5655.4.1.8.2.1
spIndexAn index value that uniquely identify the property.ro
Integer32
.1.3.6.1.4.1.5655.4.1.8.2.1.1
spNameSubscriber property name.ro
SnmpAdminString
.1.3.6.1.4.1.5655.4.1.8.2.1.2
spTypeSubscriber application property type in respect to: variable type (integer, boolean, string etc), number of elements (scalar or array) and restrictions if any exist.ro
SnmpAdminString (SNMP-FRAMEWORK-MIB)
.1.3.6.1.4.1.5655.4.1.8.2.1.3
subscribersPropertiesValueTableThe subscribers properties value table is used to provide subscriber properties values for subscribers introduced into the SCE. An entry must be created by setting the entry's spvRowStatus object with createAndGo (4) before setting any other of the entry's objects. To specify the subscriber's property set the spvSubName and spvPropertyName objects. The spvPropertyName must be one of the properties from the subscribersPropertiesTable. To remove an entry set the spvRowStatus object with destroy (6). To poll the subscriber property the manager need to poll the spvPropertyStringValue, the spvPropertyUintValue or the spvPropertyCounter64Value objects. The table is cleared when the application is unloaded.
SEQUENCE OF SubscribersPropertiesValueEntry
.1.3.6.1.4.1.5655.4.1.8.3
subscribersPropertiesValueEntryA subscribersPropertiesValueTable entry.
SubscribersPropertiesValueEntry
.1.3.6.1.4.1.5655.4.1.8.3.1
spvIndexA index to the table.
Integer32
.1.3.6.1.4.1.5655.4.1.8.3.1.1
spvSubNameA name that uniquely identifies the subscriber.rw
SnmpAdminString
.1.3.6.1.4.1.5655.4.1.8.3.1.2
spvPropertyNameA name that uniquely identifies the subscriber property. Array type properties may be accessed each element at a time in C like format, e.g. x[1], or y[1][2].rw
SnmpAdminString
.1.3.6.1.4.1.5655.4.1.8.3.1.3
spvRowStatusThis object controls creation of a table entry. Only setting the createAndGo (4) and destroy (6) will change the status of the entry.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.5655.4.1.8.3.1.4
spvPropertyStringValueThe value of the subscriber property in string format.ro
SnmpAdminString
.1.3.6.1.4.1.5655.4.1.8.3.1.5
spvPropertyUintValueThe value of the subscriber property in unsigned integer. If the property can't be casted to unsigned integer this object returns zero.ro
Unsigned32
.1.3.6.1.4.1.5655.4.1.8.3.1.6
spvPropertyCounter64ValueThe value of the subscriber property in Counter64. If the property can't be casted to Counter64 this object returns zero.ro
Counter64
.1.3.6.1.4.1.5655.4.1.8.3.1.7
trafficProcessorGrp
OBJECT IDENTIFIER
.1.3.6.1.4.1.5655.4.1.9
tpInfoTableThe Traffic Processor Info table consists of data regarding traffic handled by the traffic processors by classification of packets and flows.
SEQUENCE OF TpInfoEntry
.1.3.6.1.4.1.5655.4.1.9.1
tpInfoEntryA tpInfoTable entry.
TpInfoEntry
.1.3.6.1.4.1.5655.4.1.9.1.1
tpModuleIndexAn index value that uniquely identifies the module where this traffic processor is located.ro
Integer32
.1.3.6.1.4.1.5655.4.1.9.1.1.1
tpIndexAn index value that uniquely identifies this traffic processor within a module. The value is determined by the location of the traffic processor on the module. Valid entries are 1 to the value of moduleNumTrafficProcessors for this module.ro
Integer32
.1.3.6.1.4.1.5655.4.1.9.1.1.2
tpTotalNumHandledPacketsIndicates the accumulated number of packets handled by this traffic processor since last reboot or last time this counter was cleared.ro
Unsigned32
.1.3.6.1.4.1.5655.4.1.9.1.1.3
tpTotalNumHandledFlowsIndicates the accumulated number of flows handled by this traffic Processor since last reboot or last time this counter was cleared.ro
Unsigned32
.1.3.6.1.4.1.5655.4.1.9.1.1.4
tpNumActiveFlowsIndicates the number of flows currently being handled by this traffic processor.ro
Unsigned32
.1.3.6.1.4.1.5655.4.1.9.1.1.5
tpNumActiveFlowsPeakIndicates the peak value of tpNumActiveFlows since the last time it was cleared or the system started.ro
Unsigned32
.1.3.6.1.4.1.5655.4.1.9.1.1.6
tpNumActiveFlowsPeakTimeIndicates the time since the tpNumActiveFlowsPeak value occurred.ro
TimeTicks UNITS "milliseconds"
.1.3.6.1.4.1.5655.4.1.9.1.1.7
tpNumTcpActiveFlowsIndicates the number of TCP flows currently being handled by this traffic processor.ro
Unsigned32
.1.3.6.1.4.1.5655.4.1.9.1.1.8
tpNumTcpActiveFlowsPeakIndicates the peak value of tpNumTcpActiveFlows since the last time it was cleared or the system started.ro
Unsigned32
.1.3.6.1.4.1.5655.4.1.9.1.1.9
tpNumTcpActiveFlowsPeakTimeIndicates the time since the tpNumTcpActiveFlowsPeak value occurred.ro
TimeTicks UNITS "milliseconds"
.1.3.6.1.4.1.5655.4.1.9.1.1.10
tpNumUdpActiveFlowsIndicates the number of UDP flows currently being handled by this traffic processor.ro
Unsigned32
.1.3.6.1.4.1.5655.4.1.9.1.1.11
tpNumUdpActiveFlowsPeakIndicates the peak value of tpNumUdpActiveFlows since the last time it was cleared or the system started.ro
Unsigned32
.1.3.6.1.4.1.5655.4.1.9.1.1.12
tpNumUdpActiveFlowsPeakTimeIndicates the time since the tpNumUdpActiveFlowsPeak value occurred.ro
TimeTicks UNITS "milliseconds"
.1.3.6.1.4.1.5655.4.1.9.1.1.13
tpNumNonTcpUdpActiveFlowsIndicates the number of non TCP/UDP flows currently being handled by this traffic processor.ro
Unsigned32
.1.3.6.1.4.1.5655.4.1.9.1.1.14
tpNumNonTcpUdpActiveFlowsPeakIndicates the peak value of tpNumNonTcpUdpActiveFlows since the last time it was cleared or the system started.ro
Unsigned32
.1.3.6.1.4.1.5655.4.1.9.1.1.15
tpNumNonTcpUdpActiveFlowsPeakTimeIndicates the time since the tpNumNonTcpUdpActiveFlowsPeak value occurred.ro
TimeTicks UNITS "milliseconds"
.1.3.6.1.4.1.5655.4.1.9.1.1.16
tpTotalNumBlockedPacketsIndicates the accumulated number of packets discarded by this traffic processor according to application blocking rules.ro
Unsigned32
.1.3.6.1.4.1.5655.4.1.9.1.1.17
tpTotalNumBlockedFlowsIndicates the accumulated number of flows discarded by this traffic processor according to application blocking rules.ro
Unsigned32
.1.3.6.1.4.1.5655.4.1.9.1.1.18
tpTotalNumDiscardedPacketsDueToBwLimitIndicates the accumulated number of packets discarded by this traffic processor due to subscriber bandwidth limitations.ro
Unsigned32
.1.3.6.1.4.1.5655.4.1.9.1.1.19
tpTotalNumWredDiscardedPacketsIndicates the accumulated number of packets discarded by this traffic processor due to congestion in the queues.ro
Unsigned32
.1.3.6.1.4.1.5655.4.1.9.1.1.20
tpTotalNumFragmentsIndicates the accumulated number of fragmented packets handled by this traffic processor.ro
Unsigned32
.1.3.6.1.4.1.5655.4.1.9.1.1.21
tpTotalNumNonIpPacketsIndicates the accumulated number of non IP packets handled by this traffic processor.ro
Unsigned32
.1.3.6.1.4.1.5655.4.1.9.1.1.22
tpTotalNumIpCrcErrPacketsIndicates the accumulated number of packets with IP CRC error handled by this traffic processor.ro
Unsigned32
.1.3.6.1.4.1.5655.4.1.9.1.1.23
tpTotalNumIpLengthErrPacketsIndicates the accumulated number of packets with IP length error handled by this traffic processor.ro
Unsigned32
.1.3.6.1.4.1.5655.4.1.9.1.1.24
tpTotalNumIpBroadcastPacketsIndicates the accumulated number of IP broadcast packets handled by this traffic processor.ro
Unsigned32
.1.3.6.1.4.1.5655.4.1.9.1.1.25
tpTotalNumTtlErrPacketsIndicates the accumulated number of packets with TTL error handled by this traffic processor.ro
Unsigned32
.1.3.6.1.4.1.5655.4.1.9.1.1.26
tpTotalNumTcpUdpCrcErrPacketsIndicates the accumulated number of TCP/UDP packets with CRC error handled by this traffic processor.ro
Unsigned32
.1.3.6.1.4.1.5655.4.1.9.1.1.27
tpClearCountersTimeIndicates the time since the traffic processor statistics counters were last cleared. Writing a 0 to this object causes the traffic processor counters to be cleared.rw
TimeTicks UNITS "milliseconds"
.1.3.6.1.4.1.5655.4.1.9.1.1.28
tpHandledPacketsRateIndicates the rate in packets per second of the packets handled by this traffic processor.ro
Unsigned32
.1.3.6.1.4.1.5655.4.1.9.1.1.29
tpHandledPacketsRatePeakIndicates the peak value of tpHandledPacketsRate since the last time it was cleared or the system started.ro
Unsigned32
.1.3.6.1.4.1.5655.4.1.9.1.1.30
tpHandledPacketsRatePeakTimeIndicates the time since the tpHandledPacketsRatePeak value occurred.ro
TimeTicks UNITS "milliseconds"
.1.3.6.1.4.1.5655.4.1.9.1.1.31
tpHandledFlowsRateIndicates the rate in flows opening per second of the flows handled by this traffic processor.ro
Unsigned32
.1.3.6.1.4.1.5655.4.1.9.1.1.32
tpHandledFlowsRatePeakIndicates the peak value of tpHandledFlowsRate since the last time it was cleared or the system started.ro
Unsigned32
.1.3.6.1.4.1.5655.4.1.9.1.1.33
tpHandledFlowsRatePeakTimeIndicates the time since the tpHandledFlowsRatePeakTime value occurred.ro
TimeTicks UNITS "milliseconds"
.1.3.6.1.4.1.5655.4.1.9.1.1.34
tpCpuUtilizationIndicates the percentage of CPU utilization, updated once every 2 minutes.ro
Integer32
.1.3.6.1.4.1.5655.4.1.9.1.1.35
tpCpuUtilizationPeakIndicates the peak value of tpCpuUtilization since the last time it was cleared or the system started.ro
Integer32
.1.3.6.1.4.1.5655.4.1.9.1.1.36
tpCpuUtilizationPeakTimeIndicates the time since the tpCpuUtilizationPeak value occurred.ro
TimeTicks UNITS "milliseconds"
.1.3.6.1.4.1.5655.4.1.9.1.1.37
tpFlowsCapacityUtilizationIndicates the percentage of flows capacity utilization.ro
Integer32
.1.3.6.1.4.1.5655.4.1.9.1.1.38
tpFlowsCapacityUtilizationPeakIndicates the peak value of tpFlowsCapacityUtilization since the last time it was cleared or the system started.ro
Integer32
.1.3.6.1.4.1.5655.4.1.9.1.1.39
tpFlowsCapacityUtilizationPeakTimeIndicates the time since the tpFlowsCapacityUtilizationPeak value occurred.ro
TimeTicks UNITS "milliseconds"
.1.3.6.1.4.1.5655.4.1.9.1.1.40
tpServiceLossIndicates the relative amount of service loss in this traffic Processor, in units of 0.001%, since last reboot or last time this counter was cleared.ro
Integer32
.1.3.6.1.4.1.5655.4.1.9.1.1.41
pportGrp
OBJECT IDENTIFIER
.1.3.6.1.4.1.5655.4.1.10
pportTableA list of port entries. The number of entries is determined by the number of modules in the chassis and the number of ports on each module.
SEQUENCE OF PportEntry
.1.3.6.1.4.1.5655.4.1.10.1
pportEntryEntry containing information for a particular port on a module.
PportEntry
.1.3.6.1.4.1.5655.4.1.10.1.1
pportModuleIndexAn index value that uniquely identifies the module where this port is located.ro
Integer32
.1.3.6.1.4.1.5655.4.1.10.1.1.1
pportIndexAn index value that uniquely identifies this port within a module. The value is determined by the location of the port on the module. Valid entries are 1 to the value of moduleNumPorts for this module.ro
Integer32
.1.3.6.1.4.1.5655.4.1.10.1.1.2
pportTypeThe type of physical layer medium dependent interface on the port.ro
Enumeration
.1.3.6.1.4.1.5655.4.1.10.1.1.3
pportNumTxQueuesThe number of transmit queues supported by this port.ro
Integer32
.1.3.6.1.4.1.5655.4.1.10.1.1.4
pportIfIndexThe value of the instance of the ifIndex object, defined in MIB-II, for this port.ro
Integer32
.1.3.6.1.4.1.5655.4.1.10.1.1.5
pportAdminSpeedThe desired speed of the port. The current operational speed of the port can be determined from ifSpeed.ro
Enumeration
.1.3.6.1.4.1.5655.4.1.10.1.1.6
pportAdminDuplexThe desired duplex of the port.ro
Enumeration
.1.3.6.1.4.1.5655.4.1.10.1.1.7
pportOperDuplexIndicates whether the port is operating in half-duplex or full-duplex.ro
Enumeration
.1.3.6.1.4.1.5655.4.1.10.1.1.8
pportLinkIndexIndicates the linkIndex of the link that this port belongs to. Value of 0 indicates that this port is not associated with any link. Value of -1 indicates that this port is associated to multiple links.ro
Integer32 (-1..255)
.1.3.6.1.4.1.5655.4.1.10.1.1.9
pportOperStatusIndicates the status of the port and if the port is down indicates the reason.ro
Enumeration
.1.3.6.1.4.1.5655.4.1.10.1.1.10
txQueuesGrp
OBJECT IDENTIFIER
.1.3.6.1.4.1.5655.4.1.11
txQueuesTableThis table consists of information on the SCE's transmit queues.
SEQUENCE OF TxQueuesEntry
.1.3.6.1.4.1.5655.4.1.11.1
txQueuesEntryA txQueuesTable entry.
TxQueuesEntry
.1.3.6.1.4.1.5655.4.1.11.1.1
txQueuesModuleIndexAn index value that uniquely identifies the module where this queue is located.ro
Integer32
.1.3.6.1.4.1.5655.4.1.11.1.1.1
txQueuesPortIndexAn index value that uniquely identifies the port where this queue is located.ro
Integer32
.1.3.6.1.4.1.5655.4.1.11.1.1.2
txQueuesQueueIndexAn index value that uniquely identifies this queue within a port. The value is determined by the location of the queue on the port. Valid entries are 1 to the value of portNumTxQueues for this module.ro
Integer32
.1.3.6.1.4.1.5655.4.1.11.1.1.3
txQueuesDescriptionDescription of the transmit queue.ro
SnmpAdminString (SNMP-FRAMEWORK-MIB)
.1.3.6.1.4.1.5655.4.1.11.1.1.4
txQueuesBandwidthThe bandwidth in L1 kbps configured for this queue.ro
Integer32
.1.3.6.1.4.1.5655.4.1.11.1.1.5
txQueuesUtilizationThe percentage of bandwidth utilization relative to the configured rate.ro
Integer32
.1.3.6.1.4.1.5655.4.1.11.1.1.6
txQueuesUtilizationPeakIndicates the peak value of txQueuesUtilization since the last time it was cleared or the system started.ro
Integer32
.1.3.6.1.4.1.5655.4.1.11.1.1.7
txQueuesUtilizationPeakTimeIndicates the time since the txQueuesUtilizationPeak value occurred.ro
TimeTicks UNITS "milliseconds"
.1.3.6.1.4.1.5655.4.1.11.1.1.8
txQueuesClearCountersTimeIndicates the time since the TX queues statistics counters were last cleared. Writing a 0 to this object causes the TX queues counters to be cleared.rw
TimeTicks UNITS "milliseconds"
.1.3.6.1.4.1.5655.4.1.11.1.1.9
txQueuesDroppedBytesAmount of dropped L3 bytes. This is valid only if the system is configured to count dropped bytes per TX queue.ro
Counter64 UNITS "bytes"
.1.3.6.1.4.1.5655.4.1.11.1.1.10
globalControllersGrp
OBJECT IDENTIFIER
.1.3.6.1.4.1.5655.4.1.12
globalControllersTableThis table consists of information on the SCE's Global Controllers. note: the globalControllersIndex and the SCE CLI configuration index have a offset of one i.e. 1 in the MIB refers to 0 in the CLI.
SEQUENCE OF GlobalControllersEntry
.1.3.6.1.4.1.5655.4.1.12.1
globalControllersEntryA globalControllersTable entry.
GlobalControllersEntry
.1.3.6.1.4.1.5655.4.1.12.1.1
globalControllersModuleIndexAn index value that uniquely identifies the module where this controller is located.ro
Integer32
.1.3.6.1.4.1.5655.4.1.12.1.1.1
globalControllersPortIndexAn index value that uniquely identifies the port where this controller is located.ro
Integer32
.1.3.6.1.4.1.5655.4.1.12.1.1.2
globalControllersIndexAn index value that uniquely identifies this controller within a port.ro
Integer32
.1.3.6.1.4.1.5655.4.1.12.1.1.3
globalControllersDescriptionDescription of the controller.ro
SnmpAdminString (SNMP-FRAMEWORK-MIB)
.1.3.6.1.4.1.5655.4.1.12.1.1.4
globalControllersBandwidthThe L1 bandwidth configured for this controller.ro
Integer32
.1.3.6.1.4.1.5655.4.1.12.1.1.5
globalControllersUtilizationThe percentage of bandwidth utilization relative to the configured rate.ro
Integer32
.1.3.6.1.4.1.5655.4.1.12.1.1.6
globalControllersUtilizationPeakIndicates the peak value of globalControllersUtilization since the last time it was cleared or the system started.ro
Integer32
.1.3.6.1.4.1.5655.4.1.12.1.1.7
globalControllersUtilizationPeakTimeIndicates the time since the globalControllersUtilizationPeak value occurred.ro
TimeTicks UNITS "milliseconds"
.1.3.6.1.4.1.5655.4.1.12.1.1.8
globalControllersClearCountersTimeIndicates the time since the controllers statistics counters were last cleared. Writing a 0 to this object causes the controllers counters to be cleared.rw
TimeTicks UNITS "milliseconds"
.1.3.6.1.4.1.5655.4.1.12.1.1.9
globalControllersDroppedBytesAmount of L3 dropped bytes. This is valid only if the system is configured to count dropped bytes per global controller.ro
Counter64 UNITS "bytes"
.1.3.6.1.4.1.5655.4.1.12.1.1.10
applicationGrp
OBJECT IDENTIFIER
.1.3.6.1.4.1.5655.4.1.13
appInfoTableThis table consists of information on the SCE's application.
SEQUENCE OF AppInfoEntry
.1.3.6.1.4.1.5655.4.1.13.1
appInfoEntryA appInfoTable entry.
AppInfoEntry
.1.3.6.1.4.1.5655.4.1.13.1.1
appNameThe application name.ro
SnmpAdminString (SNMP-FRAMEWORK-MIB)
.1.3.6.1.4.1.5655.4.1.13.1.1.1
appDescriptionThe application description.ro
SnmpAdminString (SNMP-FRAMEWORK-MIB)
.1.3.6.1.4.1.5655.4.1.13.1.1.2
appVersionThe application version.ro
SnmpAdminString (SNMP-FRAMEWORK-MIB)
.1.3.6.1.4.1.5655.4.1.13.1.1.3
appPropertiesTableThe application properties table provides the list of properties available for the application. The table is cleared when the application is unloaded.
SEQUENCE OF AppPropertiesEntry
.1.3.6.1.4.1.5655.4.1.13.2
appPropertiesEntryA appPropertiesTable entry.
AppPropertiesEntry
.1.3.6.1.4.1.5655.4.1.13.2.1
apIndexAn index value that uniquely identify the property.ro
Integer32
.1.3.6.1.4.1.5655.4.1.13.2.1.1
apNameApplication property name. Property can be either scalar or array type.ro
SnmpAdminString
.1.3.6.1.4.1.5655.4.1.13.2.1.2
apTypeApplication property type.ro
SnmpAdminString (SNMP-FRAMEWORK-MIB)
.1.3.6.1.4.1.5655.4.1.13.2.1.3
appPropertiesValueTableThe applications properties value table is used to provide specific values for the applications properties. An entry must be created by setting the entry's apvRowStatus object with createAndGo (4) before setting the name of the property requested. To specify the property set the apvPropertyName objects. The apvPropertyName must be one of the properties from the appPropertiesTable. To remove an entry set the apvRowStatus object with destroy (6). To poll the application property, poll the apvPropertyStringValue, apvPropertyUintValue, or apvPropertyCounter64Value object. The table is cleared when the application is unloaded.
SEQUENCE OF AppPropertiesValueEntry
.1.3.6.1.4.1.5655.4.1.13.3
appPropertiesValueEntryA appPropertiesValueTable entry.
AppPropertiesValueEntry
.1.3.6.1.4.1.5655.4.1.13.3.1
apvIndexIndex to the table.
Integer32
.1.3.6.1.4.1.5655.4.1.13.3.1.1
apvPropertyNameA name that uniquely identifies the application property. Array type properties may be accessed each element at a time in C like format, e.g. x[1], or y[1][2].rw
SnmpAdminString
.1.3.6.1.4.1.5655.4.1.13.3.1.2
apvRowStatusThis object controls creation of a table entry.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.5655.4.1.13.3.1.3
apvPropertyStringValueThe value of the application property in display string format.ro
SnmpAdminString
.1.3.6.1.4.1.5655.4.1.13.3.1.4
apvPropertyUintValueThe value of the application property in unsigned integer. If the property can't be casted to unsigned integer this object returns zero.ro
Unsigned32
.1.3.6.1.4.1.5655.4.1.13.3.1.5
apvPropertyCounter64ValueThe value of the application property in Counter64 format. If the property can't be casted to Counter64, getting this object returns zero.ro
Counter64
.1.3.6.1.4.1.5655.4.1.13.3.1.6
trafficCountersGrp
OBJECT IDENTIFIER
.1.3.6.1.4.1.5655.4.1.14
trafficCountersTableThe Traffic counters table provides information regarding the value of different the traffic counters.
SEQUENCE OF TrafficCountersEntry
.1.3.6.1.4.1.5655.4.1.14.1
trafficCountersEntryEntry containing information about a traffic counter.
TrafficCountersEntry
.1.3.6.1.4.1.5655.4.1.14.1.1
trafficCounterIndexAn index value that uniquely identifies the counter.ro
Integer32
.1.3.6.1.4.1.5655.4.1.14.1.1.1
trafficCounterValueA 64 bit counter value.ro
Counter64
.1.3.6.1.4.1.5655.4.1.14.1.1.2
trafficCounterNameThe name given to this counter.ro
SnmpAdminString (SNMP-FRAMEWORK-MIB)
.1.3.6.1.4.1.5655.4.1.14.1.1.3
trafficCounterTypeDefines whether there the traffic counters counts by 'packets(3)' or by 'bytes(2)'.ro
Enumeration
.1.3.6.1.4.1.5655.4.1.14.1.1.4
attackGrp
OBJECT IDENTIFIER
.1.3.6.1.4.1.5655.4.1.15
attackTypeTableThe Attack type table provides information regarding detected attacks, aggregated by attack type.
SEQUENCE OF AttackTypeEntry
.1.3.6.1.4.1.5655.4.1.15.1
attackTypeEntryEntry containing aggregated information about attacks of a given type.
AttackTypeEntry
.1.3.6.1.4.1.5655.4.1.15.1.1
attackTypeIndexAn index value that uniquely identifies the attack type.ro
Integer32
.1.3.6.1.4.1.5655.4.1.15.1.1.1
attackTypeNameThe name of this attack type.ro
SnmpAdminString (SNMP-FRAMEWORK-MIB)
.1.3.6.1.4.1.5655.4.1.15.1.1.2
attackTypeCurrentNumAttacksThe current amount of attacks detected of this type.ro
Unsigned32
.1.3.6.1.4.1.5655.4.1.15.1.1.3
attackTypeTotalNumAttacksThe total amount of attacks detected of this type since last clear.ro
Unsigned32
.1.3.6.1.4.1.5655.4.1.15.1.1.4
attackTypeTotalNumFlowsThe total amount of flows in attacks detected of this type since last clear.ro
Counter64
.1.3.6.1.4.1.5655.4.1.15.1.1.5
attackTypeTotalNumSecondsThe total duration of attacks detected of this type since last clear.ro
Unsigned32
.1.3.6.1.4.1.5655.4.1.15.1.1.6
vasTrafficForwardingGrp
OBJECT IDENTIFIER
.1.3.6.1.4.1.5655.4.1.16
vasServerTableThe VAS server Table provides information on each VAS server operational status.
SEQUENCE OF VasServerEntry
.1.3.6.1.4.1.5655.4.1.16.1
vasServerEntryEntry containing information about VAS server status.
VasServerEntry
.1.3.6.1.4.1.5655.4.1.16.1.1
vasServerIndexAn index value that uniquely identifies a VAS server.ro
Integer32
.1.3.6.1.4.1.5655.4.1.16.1.1.1
vasServerIdThe ID of the VAS server.ro
Integer32
.1.3.6.1.4.1.5655.4.1.16.1.1.2
vasServerAdminStatusIndicates only the administrative status of the VAS sever, in order to activate a server it should be also configured with a VLAN and a group.ro
Enumeration
.1.3.6.1.4.1.5655.4.1.16.1.1.3
vasServerOperStatusIndicates the operational status of the VAS sever.ro
Enumeration
.1.3.6.1.4.1.5655.4.1.16.1.1.4
mplsVpnAutoLearnGrp
OBJECT IDENTIFIER
.1.3.6.1.4.1.5655.4.1.17
mplsVpnSoftwareCountersTableThe MPLS VPN software counters table provides information on various system software counters related to MPLS VPN auto learn.
SEQUENCE OF MplsVpnSoftwareCountersEntry
.1.3.6.1.4.1.5655.4.1.17.1
mplsVpnSoftwareCountersEntryEntry containing information about MPLS VPN auto learn SW counters.
MplsVpnSoftwareCountersEntry
.1.3.6.1.4.1.5655.4.1.17.1.1
mplsVpnMaxHWMappingsThe maximum number of MPLS VPN mappings supported by HW (including all kinds of mappings).ro
Integer32
.1.3.6.1.4.1.5655.4.1.17.1.1.1
mplsVpnCurrentHWMappingsThe current number of HW MPLS VPN mappings in use.ro
Integer32
.1.3.6.1.4.1.5655.4.1.17.1.1.2
PCUBE-SE-MIB - SNMP MIB Reference | MIBs Explorer