OpenROUTE-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for OpenROUTE-MIB.
124
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
124 total| Object Name |
|---|
proteon OBJECT IDENTIFIER .1.3.6.1.4.1.1 |
RFC1213-MIB Unknown .1.3.6.1.4.1.1 |
proElsTrapV1An ELS trap event. TRAP-TYPE .1.3.6.1.4.1.1.0.1 |
proElsTrapV2An ELS trap event. proElsSubSysEventMsg provides a
textual description of the event. TRAP-TYPE .1.3.6.1.4.1.1.0.2 |
proAdmin OBJECT IDENTIFIER .1.3.6.1.4.1.1.1 |
proSysObjId OBJECT IDENTIFIER .1.3.6.1.4.1.1.1.1 |
proElsTrapVar1 OBJECT IDENTIFIER .1.3.6.1.4.1.1.1.1.5 |
proElsTrapVar2 OBJECT IDENTIFIER .1.3.6.1.4.1.1.1.1.6 |
proElsTrapVar3 OBJECT IDENTIFIER .1.3.6.1.4.1.1.1.1.7 |
proElsTrapVar4 OBJECT IDENTIFIER .1.3.6.1.4.1.1.1.1.8 |
proElsTrapVar5 OBJECT IDENTIFIER .1.3.6.1.4.1.1.1.1.9 |
proElsTrapVar6 OBJECT IDENTIFIER .1.3.6.1.4.1.1.1.1.10 |
proElsTrapVar7 OBJECT IDENTIFIER .1.3.6.1.4.1.1.1.1.11 |
proElsTrapVar8 OBJECT IDENTIFIER .1.3.6.1.4.1.1.1.1.12 |
proElsTrapVar9 OBJECT IDENTIFIER .1.3.6.1.4.1.1.1.1.13 |
proSysObjIdP4100 OBJECT IDENTIFIER .1.3.6.1.4.1.1.1.1.41 |
proSysObjIdP4200 OBJECT IDENTIFIER .1.3.6.1.4.1.1.1.1.42 |
proSysObjIdDNX300 OBJECT IDENTIFIER .1.3.6.1.4.1.1.1.1.43 |
proSysObjIdCNX400 OBJECT IDENTIFIER .1.3.6.1.4.1.1.1.1.44 |
proSysObjIdCNX600 OBJECT IDENTIFIER .1.3.6.1.4.1.1.1.1.46 |
proSysObjIdRBX200 OBJECT IDENTIFIER .1.3.6.1.4.1.1.1.1.47 |
proSysObjIdCNX500 OBJECT IDENTIFIER .1.3.6.1.4.1.1.1.1.49 |
proSysObjIdRBX250 OBJECT IDENTIFIER .1.3.6.1.4.1.1.1.1.50 |
proSysObjIdBOSS3Slot OBJECT IDENTIFIER .1.3.6.1.4.1.1.1.1.53 |
proSysObjIdBOSSs90 OBJECT IDENTIFIER .1.3.6.1.4.1.1.1.1.54 |
proSysObjIdGT60 OBJECT IDENTIFIER .1.3.6.1.4.1.1.1.1.55 |
proSysObjIdGT62 OBJECT IDENTIFIER .1.3.6.1.4.1.1.1.1.56 |
proSysObjIdGT100 OBJECT IDENTIFIER .1.3.6.1.4.1.1.1.1.57 |
proSysObjIdGTAM OBJECT IDENTIFIER .1.3.6.1.4.1.1.1.1.58 |
proSysObjIdGT70 OBJECT IDENTIFIER .1.3.6.1.4.1.1.1.1.59 |
proSysObjIdGT72 OBJECT IDENTIFIER .1.3.6.1.4.1.1.1.1.60 |
proSysObjIdGT60-SEC OBJECT IDENTIFIER .1.3.6.1.4.1.1.1.1.61 |
proSysObjIdGT70-SEC OBJECT IDENTIFIER .1.3.6.1.4.1.1.1.1.62 |
proSysObjIdGT65 OBJECT IDENTIFIER .1.3.6.1.4.1.1.1.1.63 |
proSysObjIdGT75 OBJECT IDENTIFIER .1.3.6.1.4.1.1.1.1.64 |
proSysObjIdCSX900ER OBJECT IDENTIFIER .1.3.6.1.4.1.1.1.1.65 |
proSysObjIdGTX-1000 OBJECT IDENTIFIER .1.3.6.1.4.1.1.1.1.66 |
proSysObjIdDRAGON OBJECT IDENTIFIER .1.3.6.1.4.1.1.1.1.67 |
proSysObjIdDRAGONPRO OBJECT IDENTIFIER .1.3.6.1.4.1.1.1.1.68 |
proSysObjIdGTE2 OBJECT IDENTIFIER .1.3.6.1.4.1.1.1.1.69 |
proSysObjIdGT50 OBJECT IDENTIFIER .1.3.6.1.4.1.1.1.1.70 |
proStatus OBJECT IDENTIFIER .1.3.6.1.4.1.1.1.2 |
proStatusReloadTimeThe time (in hundredths of a second) since the last
time the router software was reloaded.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.1.1.2.1 |
proStatusStartsThe number of times the router has started since
the last reload.ro Counter .1.3.6.1.4.1.1.1.2.2 |
proStatusCrashesThe number of times the router has crashed since
the last reload. Only those crashes that caused
the router to deliberately restart due to a
software error are counted by this object.ro Counter .1.3.6.1.4.1.1.1.2.3 |
proStatusCrashMsgThe last crash message. The message will indicate
if the router has not crashed since the last reload.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.1.2.4 |
proPriv OBJECT IDENTIFIER .1.3.6.1.4.1.1.1.5 |
proActionResetThis object, when read, returns a value of zero.
A set of this object causes the router to be reset. The
value represents the delay (in seconds) before the reset
will take affect.rw INTEGER .1.3.6.1.4.1.1.1.5.2 |
proSyslogServerThe IP Address of the SYSLOG server to which all router
SYSLOG messages (to UDP port 514) are transmitted.rw IpAddress .1.3.6.1.4.1.1.1.5.5 |
proSystem OBJECT IDENTIFIER .1.3.6.1.4.1.1.6 |
proResource OBJECT IDENTIFIER .1.3.6.1.4.1.1.6.1 |
proResMemory OBJECT IDENTIFIER .1.3.6.1.4.1.1.6.1.1 |
proResMemHeap OBJECT IDENTIFIER .1.3.6.1.4.1.1.6.1.1.1 |
proResMemHeapTotalThe total number of bytes of heap memory available
for allocation.ro INTEGER .1.3.6.1.4.1.1.6.1.1.1.1 |
proResMemHeapReserveThe minimum amount of memory needed by the currently
configured protocols and features.ro INTEGER .1.3.6.1.4.1.1.6.1.1.1.2 |
proResMemHeapNeverAllocThe memory that has never been allocated.ro INTEGER .1.3.6.1.4.1.1.6.1.1.1.3 |
proResMemHeapPermAllocThe memory that is permanently allocated to router tasks.ro INTEGER .1.3.6.1.4.1.1.6.1.1.1.4 |
proResMemHeapTempAllocThe memory that is temporarily allocated to router tasks.ro INTEGER .1.3.6.1.4.1.1.6.1.1.1.5 |
proResMemHeapPrevAllocThe memory that was temporarily allocated and returned to
the free pool.ro INTEGER .1.3.6.1.4.1.1.6.1.1.1.6 |
proResMemBuf OBJECT IDENTIFIER .1.3.6.1.4.1.1.6.1.1.2 |
proResMemBufTotalThe total number of bytes of buffer memory available
for allocation.ro INTEGER .1.3.6.1.4.1.1.6.1.1.2.1 |
proResMemBufReserveThe minimum amount of memory needed by the currently
configured protocols and features.ro INTEGER .1.3.6.1.4.1.1.6.1.1.2.2 |
proResMemBufNeverAllocThe memory that has never been allocated.ro INTEGER .1.3.6.1.4.1.1.6.1.1.2.3 |
proResMemBufPermAllocThe memory that is permanently allocated to router tasks.ro INTEGER .1.3.6.1.4.1.1.6.1.1.2.4 |
proResBuffers OBJECT IDENTIFIER .1.3.6.1.4.1.1.6.1.2 |
proResBufGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.1.6.1.2.1 |
proResBufGlobalTotalThe total number of global buffers in the system.ro INTEGER .1.3.6.1.4.1.1.6.1.2.1.1 |
proResBufGlobalFreeThe total number of free buffers in the system.ro INTEGER .1.3.6.1.4.1.1.6.1.2.1.2 |
proResBufGlobalFairThe 'fair' number of buffers for each interface.ro INTEGER .1.3.6.1.4.1.1.6.1.2.1.3 |
proResBufGlobalLowThe low mark for free buffers. If the value of
proResBufGlobalFree is less than this object then freed
buffers will not be placed on any queue that has more than
the 'fair' number of buffers on it.ro INTEGER .1.3.6.1.4.1.1.6.1.2.1.4 |
proResBufTableThe per-port buffer table. SEQUENCE OF ProResBufTableEntry .1.3.6.1.4.1.1.6.1.2.2 |
proResBufTableEntryAn entry indicating the buffers allocated per interface. ProResBufTableEntry .1.3.6.1.4.1.1.6.1.2.2.1 |
proResInputBufsReqThe number of buffers requested for this interface.ro INTEGER .1.3.6.1.4.1.1.6.1.2.2.1.1 |
proResInputBufsAllocThe number of buffers allocated for this interface.ro INTEGER .1.3.6.1.4.1.1.6.1.2.2.1.2 |
proResInputBufsLowThe low water mark for number of buffers.ro INTEGER .1.3.6.1.4.1.1.6.1.2.2.1.3 |
proResInputBufsCurrentThe current number of buffers for this device.
A value of zero indicates that the device is disabled.
If, on receipt of a packet, the value of this object
is less than proResInputBufsLow than the packet is
eligible for flow control.ro INTEGER .1.3.6.1.4.1.1.6.1.2.2.1.4 |
proResInputBufsSizeThe size, in bytes, of each buffer allocated to this
interface.ro INTEGER .1.3.6.1.4.1.1.6.1.2.2.1.5 |
proResInputBufsTotalBytesThe total number of bytes allocated to this interface.
This is obtained by multiplying proResInputBufsAlloc by
proResInputBufsSize.ro INTEGER .1.3.6.1.4.1.1.6.1.2.2.1.6 |
proEls OBJECT IDENTIFIER .1.3.6.1.4.1.1.6.2 |
proElsGeneric OBJECT IDENTIFIER .1.3.6.1.4.1.1.6.2.1 |
proElsPinThe number of ELS enterprise specific traps which may be
generated per second. A value of zero indicates no limit.rw INTEGER .1.3.6.1.4.1.1.6.2.1.1 |
proElsDroppedsThe number of ELS enterprise specific traps which were
dropped because the pin had been reached.ro Counter .1.3.6.1.4.1.1.6.2.1.2 |
proElsTimestampThis object indicates whether ELS messages should be
timestamped and, if yes, the timebase to use.
Setting the object to proTSOff(1) disables timestamping.
Setting the object to proTSSysUpTime(2) uses the
sysUpTime value as the timestamp.
Setting the object to proTSTimeOfDay(3) uses the
real-time clock value as the timestamp.rw Enumeration .1.3.6.1.4.1.1.6.2.1.3 |
proElsActionA read of this object always returns the value other(1).
Setting the object to elsActionClear(2) clears all ELS
configuration. Specifically, this clear all ELS related
sram records. This action is the same as entering the
command at the ELS config menu in the gateway
console.
Setting the object to proElsActionDefault(3) turns off
logging of ELS events to both the console and SNMP traps
for all configured subsystems. This action is the same as
entering the commands:
default disp sub all
default trap sub all
at the ELS config menu in the gateway console.rw Enumeration .1.3.6.1.4.1.1.6.2.1.4 |
proElsTrapVersionThe new ELS trap format is used by default. The ability
to select the old proElsTrapVersionV1 format is only provided
for backward compatibility. It is strongly recommended that
net managers use the new and improved proElsTrapVersionV2
format.
This object reverts to its default value after a cold start
(reload).rw Enumeration .1.3.6.1.4.1.1.6.2.1.5 |
proElsSubSysTableThe ELS sub-system table. SEQUENCE OF ProElsSubSysTableEntry .1.3.6.1.4.1.1.6.2.2 |
proElsSubSysTableEntryAn entry corresponding to a specific subsystem. ProElsSubSysTableEntry .1.3.6.1.4.1.1.6.2.2.1 |
proElsSubSysIndexThis object is used to identify a specific subsystem.ro Enumeration .1.3.6.1.4.1.1.6.2.2.1.1 |
proElsSubSysDescrThis is a textual string indicating the name of the
subsystem.ro DisplayString .1.3.6.1.4.1.1.6.2.2.1.2 |
proElsSubSysNumEventsThe number of events defined for this subsystem.ro INTEGER .1.3.6.1.4.1.1.6.2.2.1.3 |
proElsSubSysDisplayEnableA read of this object always returns the value other(1).
Setting this object to one of the other enumerated values
has the effect of enabling ELS events of the specified
level to the console.rw ProElsMsgLogLevel .1.3.6.1.4.1.1.6.2.2.1.4 |
proElsSubSysDisplayDisableA read of this object always returns the value other(1).
Setting this object to one of the other enumerated values
has the effect of disabling ELS events of the specified
level to the console.rw ProElsMsgLogLevel .1.3.6.1.4.1.1.6.2.2.1.5 |
proElsSubSysTrapEnableA read of this object always returns the value other(1).
Setting this object to one of the other enumerated values
has the effect of enabling ELS events of the specified
level to a NMS via SNMP trap.rw ProElsMsgLogLevel .1.3.6.1.4.1.1.6.2.2.1.6 |
proElsSubSysTrapDisableA read of this object always returns the value other(1).
Setting this object to one of the other enumerated values
has the effect of disabling ELS events of the specified
level to a NMS via SNMP trap.rw ProElsMsgLogLevel .1.3.6.1.4.1.1.6.2.2.1.7 |
proElsSubSysCurrDisplayLevelThe current event log levels that are enabled for display
to console. Note that the value represents a bit string,
a bit for each value defined in ProElsMsgLogLevel (excluding
the other(1)) value. For example:
proMsgLevelUIError, bit 1
proMsgLevelCIError, bit 2
etc.
Note also that the levels:
proMsgLevelError
proMsgLevelInfo
proMsgLevelTrace
proMsgLevelStandard
proMsgLevelAll
are aggregates of other logging levels. So, for example,
turning on proMsgLogLevelError(6) will turn on (set the
bits) for all sub-levels in this category (i.e values
2,3,4 and 5).ro INTEGER .1.3.6.1.4.1.1.6.2.2.1.8 |
proElsSubSysCurrTrapLevelThe current event log levels that are enabled for logging
via SNMP trap. Note that the value represents a bit string,
a bit for each value defined in ProElsMsgLogLevel (excluding
the other(1)) value. For example:
proMsgLevelUIError, bit 1
proMsgLevelCIError, bit 2
etc.
Note also that the levels:
proMsgLevelError
proMsgLevelInfo
proMsgLevelTrace
proMsgLevelStandard
proMsgLevelAll
are aggregates of other logging levels. So, for example,
turning on proMsgLogLevelError(6) will turn on (set the
bits) for all sub-levels in this category (i.e values
2,3,4 and 5).ro INTEGER .1.3.6.1.4.1.1.6.2.2.1.9 |
proElsSubSysEventTableThe ELS Sub system event table. SEQUENCE OF ProElsSubSysEventTableEntry .1.3.6.1.4.1.1.6.2.3 |
proElsSubSysEventTableEntryAn entry corresponding to a specific event in the
particular subsystem. ProElsSubSysEventTableEntry .1.3.6.1.4.1.1.6.2.3.1 |
proElsSubSysEventIndexThe specific message to which this entry refers.ro INTEGER .1.3.6.1.4.1.1.6.2.3.1.1 |
proElsSubSysEventMsgThe textual description for the message. If timestamping
is turned on (proElsTimestamp is set to 2 or 3), the
8-byte timestamp and a blank will precede the ELS
message. In all cases proElsSubSysEventMsg provides
the same ELS data as would be displayed on the console.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1.6.2.3.1.2 |
proElsSubSysEventCountThe number of times this event has occurred.ro INTEGER .1.3.6.1.4.1.1.6.2.3.1.3 |
proElsSubSysEventLogLevelThe pre-defined setting that classifies this message.ro ProElsMsgLogLevel .1.3.6.1.4.1.1.6.2.3.1.4 |
proElsSubSysEventLogToConsoleThis object indicates whether this event should be logged
to the console.rw ProElsLogStatus .1.3.6.1.4.1.1.6.2.3.1.5 |
proElsSubSysEventLogToTrapThis object indicates whether this event should be logged
to SNMP trap.rw ProElsLogStatus .1.3.6.1.4.1.1.6.2.3.1.6 |
proTemp OBJECT IDENTIFIER .1.3.6.1.4.1.1.6.3 |
proTempScaleIndicates the scale used when reporting temperature values.
If Celsius(1), all temperature values are in degrees Celsius.
If Fahrenheit(2), all temperature values are in degrees
Fahrenheit.ro Enumeration .1.3.6.1.4.1.1.6.3.1 |
proMaxHwTempThis attribute indicates the maximum temperature that the
thermometer system can record. This attribute is used as
an upper bound for all temperature ranges.ro INTEGER .1.3.6.1.4.1.1.6.3.2 |
proMinHwTempThis attribute indicates the minimum temperature that the
thermometer system can record. This attribute is used as
a lower bound for all temperature ranges.ro INTEGER .1.3.6.1.4.1.1.6.3.3 |
proTempPollPeriodThis attribute determines how often the thermometer
system will recalculate the current temperature and
any temperature range checks. This value represents
time in seconds between temperature recalculations.ro INTEGER( 10..600 ) .1.3.6.1.4.1.1.6.3.4 |
proCurrentTempThe current ambient temperature of the system. This value
is recalculated by the system once per proTempPollPeriod.ro INTEGER .1.3.6.1.4.1.1.6.3.5 |
proLowTempThresholdThe temperature that will cause a Low Temperature
Condition to become true. The Low Temperature Condition will
become true when:
proCurrentTemp <= proLowTempThreshold.
The low temperature condition will reset when:
proCurrentTemp > (proLowTempThreshold + proTempHysteresis).
This range is checked one per proTempPollPeriod.ro INTEGER .1.3.6.1.4.1.1.6.3.6 |
proHighTempThresholdThe temperature that will cause a High Temperature
Condition to become true. The High Temperature Condition will
become true when:
proCurrentTemp >= proHighTempThreshold.
The high temperature condition will reset when:
proCurrentTemp < (proHighTempThreshold - proTempHysteresis).
This range is checked one per proTempPollPeriod.ro INTEGER .1.3.6.1.4.1.1.6.3.7 |
proTempHysteresisThe number of degrees that the current ambient temperature
must drop below proHighTempThreshold or above proLowTempTheshold
before the threshold's condition is deactivated.ro INTEGER .1.3.6.1.4.1.1.6.3.8 |
proHighTempConditionIndicates whether a High Temperature Condition is active.
This attribute will be set ON(2) if a High Temperature Condition
is active.ro Enumeration .1.3.6.1.4.1.1.6.3.9 |
proLowTempConditionIndicates whether a Low Temperature Condition is active.
This attribute will be set ON(2) if a Low Temperature Condition
is active.ro Enumeration .1.3.6.1.4.1.1.6.3.10 |
proHighestTempThis is the highest temperature recorded by the router since
last reset.ro INTEGER .1.3.6.1.4.1.1.6.3.11 |
proHighTempTimeThis is the time (in hundreds of seconds) that has elapsed
since proHighestTemp was last recorded.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.1.6.3.12 |
proLowestTempThis is the lowest temperature recorded by the router since
last reset.ro INTEGER .1.3.6.1.4.1.1.6.3.13 |
proLowTempTimeThis is the time (in hundreds of seconds) that has elapsed
since proLowestTemp was last recorded.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.1.6.3.14 |
proConfig OBJECT IDENTIFIER .1.3.6.1.4.1.1.6.4 |
proCfgLoad OBJECT IDENTIFIER .1.3.6.1.4.1.1.6.4.1 |
proCfgProtocolsThis object returns an ASCII string containing the short
names of all protocol types supported in the current load.ro DisplayString .1.3.6.1.4.1.1.6.4.1.1 |
proCfgDatalinksThis object returns an ASCII string containing the short
names of all datalink/MAC types supported in the current load.ro DisplayString .1.3.6.1.4.1.1.6.4.1.2 |
proCfgFeaturesThis object returns an ASCII string containing the short
names of all router features supported in the current load.ro DisplayString .1.3.6.1.4.1.1.6.4.1.3 |