OSPFV3-MIB-JUNIPER
Updated Mar 30, 2011The MIB module for OSPF version 3.
Copyright (C) The Internet Society (2006). This version of this MIB module is part of RFC XXXX; see the RFC itself for full legal notices.
Main OID:
jnxOspfv3MIB.1.3.6.1.4.1.2636.5.4.1
196
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
196 total| Object Name |
|---|
jnxOspfv3MIBThe MIB module for OSPF version 3.
Copyright (C) The Internet Society (2006).
This version of this MIB module is part of
RFC XXXX; see the RFC itself for full legal
notices. MODULE-IDENTITY .1.3.6.1.4.1.2636.5.4.1 |
jnxOspfv3Notifications OBJECT IDENTIFIER .1.3.6.1.4.1.2636.5.4.1.0 |
jnxOspfv3VirtIfStateChangeAn ospfv3VirtIfStateChange notification signifies that there
has been a change in the state of an OSPFv3 virtual
interface.
This notification should be generated when the interface
state regresses (e.g., goes from Point-to-Point to Down)
or progresses to a terminal state (i.e., Point-to-Point). NOTIFICATION-TYPE .1.3.6.1.4.1.2636.5.4.1.0.1 |
jnxOspfv3NbrStateChangeAn ospfv3NbrStateChange notification signifies that
there has been a change in the state of a
non-virtual OSPFv3 neighbor. This notification should be
generated when the neighbor state regresses
(e.g., goes from Attempt or Full to 1-Way or
Down) or progresses to a terminal state (e.g.,
2-Way or Full). When an neighbor transitions
from or to Full on non-broadcast multi-access
and broadcast networks, the notification should be
generated by the designated router. A designated
router transitioning to Down will be noted by
ospfIfStateChange. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.5.4.1.0.2 |
jnxOspfv3VirtNbrStateChangeAn ospfv3VirtNbrStateChange notification signifies
that there has been a change in the state of an OSPFv3
virtual neighbor. This notification should be generated
when the neighbor state regresses (e.g., goes
from Attempt or Full to 1-Way or Down) or
progresses to a terminal state (e.g., Full). NOTIFICATION-TYPE .1.3.6.1.4.1.2636.5.4.1.0.3 |
jnxOspfv3IfConfigErrorAn ospfv3IfConfigError notification signifies that a
packet has been received on a non-virtual
interface from a router whose configuration
parameters conflict with this router's
configuration parameters. Note that the event
optionMismatch should cause a notification only if it
prevents an adjacency from forming. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.5.4.1.0.4 |
jnxOspfv3VirtIfConfigErrorAn ospfv3VirtIfConfigError notification signifies that a
packet has been received on a virtual interface
from a router whose configuration parameters
conflict with this router's configuration
parameters. Note that the event optionMismatch
should cause a notification only if it prevents an
adjacency from forming. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.5.4.1.0.5 |
jnxOspfv3IfRxBadPacketAn ospfv3IfRxBadPacket notification signifies that an
ospfv3 packet that cannot be parsed has been received on a
non-virtual interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.5.4.1.0.6 |
jnxOspfv3VirtIfRxBadPacketAn ospfv3VirtIfRxBadPacket notification signifies
that an OSPFv3 packet that cannot be parsed has been received
on a virtual interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.5.4.1.0.7 |
jnxOspfv3LsdbOverflowAn ospfv3LsdbOverflow notification signifies that the
number of LSAs in the router's link-state
database has exceeded ospfv3ExtAreaLsdbLimit. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.5.4.1.0.8 |
jnxOspfv3LsdbApproachingOverflowAn ospfv3LsdbApproachingOverflow notification signifies
that the number of LSAs in the router's
link-state database has exceeded ninety percent of
ospfv3ExtAreaLsdbLimit. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.5.4.1.0.9 |
jnxOspfv3IfStateChangeAn ospfv3IfStateChange notification signifies that there
has been a change in the state of a non-virtual
OSPFv3 interface. This notification should be generated
when the interface state regresses (e.g., goes
from Dr to Down) or progresses to a terminal
state (i.e., Point-to-Point, DR Other, Dr, or
Backup). NOTIFICATION-TYPE .1.3.6.1.4.1.2636.5.4.1.0.10 |
jnxOspfv3NssaTranslatorStatusChangeAn ospfv3NssaTranslatorStatusChange notification
indicates that there has been a change in the router's
ability to translate OSPFv3 NSSA LSAs into OSPFv3 External
LSAs. This notification should be generated when the
Translator Status transitions from or to any defined
status on a per area basis. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.5.4.1.0.11 |
jnxOspfv3RestartStatusChangeAn ospfv3RestartStatusChange notification signifies that
there has been a change in the graceful restart
state for the router. This notification should be
generated when the router restart status
changes. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.5.4.1.0.12 |
jnxOspfv3NbrRestartHelperStatusChangeAn ospfv3NbrRestartHelperStatusChange notification
signifies that there has been a change in the
graceful restart helper state for the neighbor.
This notification should be generated when the
neighbor restart helper status transitions for a neighbor. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.5.4.1.0.13 |
jnxOspfv3VirtNbrRestartHelperStatusChangeAn ospfv3VirtNbrRestartHelperStatusChange
notification signifies that there has been a
change in the graceful restart helper state for
the virtual neighbor. This notification should be
generated when the virtual neighbor restart helper status
transitions for a virtual neighbor. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.5.4.1.0.14 |
jnxOspfv3Objects OBJECT IDENTIFIER .1.3.6.1.4.1.2636.5.4.1.1 |
jnxOspfv3GeneralGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2636.5.4.1.1.1 |
jnxOspfv3RouterIdA 32-bit integer uniquely identifying the
router in the Autonomous System. To ensure
uniqueness, this may default to the value of
one of the router's IPv4 host addresses,
represented as a 32-bit unsigned integer,
if IPv4 is configured on the router.rwdeprecated JnxOspfv3RouterIdTc .1.3.6.1.4.1.2636.5.4.1.1.1.1 |
jnxOspfv3AdminStatThe administrative status of OSPFv3 in the
router. The value 'enabled' denotes that the
OSPFv3 Process is active on at least one
interface; 'disabled' disables it on all
interfaces.rwdeprecated Status (OSPF-MIB) .1.3.6.1.4.1.2636.5.4.1.1.1.2 |
jnxOspfv3VersionNumberThe version number of OSPF for IPv6 is 3.rodeprecated Enumeration .1.3.6.1.4.1.2636.5.4.1.1.1.3 |
jnxOspfv3AreaBdrRtrStatusA flag to note whether this router is an area
border router.rodeprecated TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.5.4.1.1.1.4 |
jnxOspfv3ASBdrRtrStatusA flag to note whether this router is
configured as an Autonomous System border router.rwdeprecated TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.5.4.1.1.1.5 |
jnxOspfv3AsScopeLsaCountThe number of AS-Scope (e.g. AS-External) link state
advertisements in the link state database.rodeprecated Gauge32 .1.3.6.1.4.1.2636.5.4.1.1.1.6 |
jnxOspfv3AsScopeLsaCksumSumThe 32-bit unsigned sum of the LS checksums of
the AS-scoped link state advertisements
contained in the link state database. This sum
can be used to determine if there has been a
change in a router's link state database, and
to compare the link state database of two
routers.rodeprecated Integer32 .1.3.6.1.4.1.2636.5.4.1.1.1.7 |
jnxOspfv3OriginateNewLsasThe number of new link-state advertisements
that have been originated. This number is
incremented each time the router originates a new
LSA.rodeprecated Counter32 .1.3.6.1.4.1.2636.5.4.1.1.1.8 |
jnxOspfv3RxNewLsasThe number of link state advertisements
received determined to be new instantiations.
This number does not include newer
instantiations of self-originated link state
advertisements.rodeprecated Counter32 .1.3.6.1.4.1.2636.5.4.1.1.1.9 |
jnxOspfv3ExtLsaCountThe number of External(LS type 0x4005) in the
link state databaserodeprecated Gauge32 .1.3.6.1.4.1.2636.5.4.1.1.1.10 |
jnxOspfv3ExtAreaLsdbLimitThe maximum number of non-default
AS-external-LSAs entries that can be stored in the
link state database. If the value is -1, then
there is no limit.
When the number of non-default AS-external-LSAs
in a router's link-state database reaches
ospfv3ExtAreaLsdbLimit, the router enters Overflow
state. The router never holds more than
ospfv3ExtAreaLsdbLimit non-default AS-external-LSAs
in its database. Ospfv3ExtAreaLsdbLimit MUST be set
identically in all routers attached to the OSPFv3
backbone and/or any regular OSPFv3 area. (i.e.,
OSPFv3 stub areas and NSSAs are excluded).rwdeprecated Integer32 (-1..'7FFFFFFF'h) .1.3.6.1.4.1.2636.5.4.1.1.1.11 |
jnxOspfv3MulticastExtensionsA Bit Mask indicating whether the router is
forwarding IPv6 multicast datagrams based on
the algorithms defined in the Multicast
Extensions to OSPF.
If intraAreaMulticast set, indicates that the router
can forward IPv6 multicast datagrams in the router's
directly attached areas (called intra-area
multicast routing).
If interAreaMulticast set, indicates that the router
can forward IPv6 multicast datagrams between OSPFv3
areas (called inter-area multicast routing).
If interAsMulticast set, indicates that the router can
forward IPv6 multicast datagrams between
Autonomous Systems (called inter-AS multicast
routing).
Only certain combinations of bit settings are
allowed, namely:
- All bits cleared (no multicasting)
- intraAreaMulticast only,
- intraAreaMulticast and interAreaMulticast,
- intraAreaMulticast and interAsMulticast
- intraAreaMulticast, interAreaMulticast and
interAsMulticast
By default, all bits are cleared.rwdeprecated Bits .1.3.6.1.4.1.2636.5.4.1.1.1.12 |
jnxOspfv3ExitOverflowIntervalThe number of seconds that, after entering
Overflow State, a router will attempt to leave
Overflow State. This allows the router to again
originate non-default, AS-External-LSAs. When
set to 0, the router will not leave Overflow
State until restarted.rwdeprecated Unsigned32 UNITS "seconds" .1.3.6.1.4.1.2636.5.4.1.1.1.13 |
jnxOspfv3DemandExtensionsThe router's support for demand routing.rwdeprecated TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.5.4.1.1.1.14 |
jnxOspfv3ReferenceBandwidthReference bandwidth in kilobits/second for
calculating default interface metrics. The
default value is 100,000 KBPS (100 MBPS)rwdeprecated Unsigned32 .1.3.6.1.4.1.2636.5.4.1.1.1.15 |
jnxOspfv3RestartSupportThe router's support for OSPF Graceful restart.
Options include: no restart support, only planned
restarts or both planned and unplanned restarts.rwdeprecated Enumeration .1.3.6.1.4.1.2636.5.4.1.1.1.16 |
jnxOspfv3RestartIntervalConfigured OSPF Graceful restart timeout interval.rwdeprecated JnxOspfv3UpToRefreshIntervalTc UNITS "seconds" .1.3.6.1.4.1.2636.5.4.1.1.1.17 |
jnxOspfv3RestartStatusThe current status of OSPF Graceful restart capability.rodeprecated Enumeration .1.3.6.1.4.1.2636.5.4.1.1.1.18 |
jnxOspfv3RestartAgeRemaining time in current OSPF Graceful restart
interval.rodeprecated JnxOspfv3UpToRefreshIntervalTc UNITS "seconds" .1.3.6.1.4.1.2636.5.4.1.1.1.19 |
jnxOspfv3RestartExitRcDescribes the outcome of the last attempt at a
Graceful restart.
none:............no restart has yet been attempted.
inProgress:......a restart attempt is currently underway.
completed:.......the last restart completed successfully.
timedOut:........the last restart timed out.
topologyChanged:.the last restart was aborted due to
a topology change.rodeprecated Enumeration .1.3.6.1.4.1.2636.5.4.1.1.1.20 |
jnxOspfv3NotificationEnableIf this object is set to true(1), then it enables
the generation of OSPFv3 Notifications. If it is
set to false(2), these notifications are not
generated.
Configured values MUST survive an agent reboot.rwdeprecated TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.5.4.1.1.1.21 |
jnxOspfv3AreaTableInformation describing the configured
parameters and cumulative statistics of the router's
attached areas. Marking this table and its objects
deprecated as it is now implemented as a part of
RFC 5643.deprecated SEQUENCE OF JnxOspfv3AreaEntry .1.3.6.1.4.1.2636.5.4.1.1.2 |
jnxOspfv3AreaEntryInformation describing the configured
parameters and cumulative statistics of one of the
router's attached areas.deprecated JnxOspfv3AreaEntry .1.3.6.1.4.1.2636.5.4.1.1.2.1 |
jnxOspfv3AreaIdA 32-bit integer uniquely identifying an area.
Area ID 0 is used for the OSPFv3 backbone.deprecated JnxOspfv3AreaIdTc .1.3.6.1.4.1.2636.5.4.1.1.2.1.1 |
jnxOspfv3ImportAsExternIndicates whether an area is a Stub area, NSSA, or
standard area. AS-scope LSAs are not imported into Stub
Areas or NSSAs. NSSAs import AS-External data as NSSA
LSAs which have Area-scoperwdeprecated Enumeration .1.3.6.1.4.1.2636.5.4.1.1.2.1.2 |
jnxOspfv3AreaSpfRunsThe number of times that the intra-area route
table has been calculated using this area's
link state database. This is typically done
using Dijkstra's algorithm.rodeprecated Counter32 .1.3.6.1.4.1.2636.5.4.1.1.2.1.3 |
jnxOspfv3AreaBdrRtrCountThe total number of area border routers
reachable within this area. This is initially zero,
and is calculated in each SPF Pass.rodeprecated Gauge32 .1.3.6.1.4.1.2636.5.4.1.1.2.1.4 |
jnxOspfv3AreaAsBdrRtrCountThe total number of Autonomous System border
routers reachable within this area. This is
initially zero, and is calculated in each SPF
Pass.rodeprecated Gauge32 .1.3.6.1.4.1.2636.5.4.1.1.2.1.5 |
jnxOspfv3AreaScopeLsaCountThe total number of Area-Scope link state
advertisements in this area's link state
database.rodeprecated Gauge32 .1.3.6.1.4.1.2636.5.4.1.1.2.1.6 |
jnxOspfv3AreaScopeLsaCksumSumThe 32-bit unsigned sum of the Area-Scope link state
advertisements' LS checksums contained in this
area's link state database. The sum can be used
to determine if there has been a change in a
router's link state database, and to compare the
link-state database of two routers.rodeprecated Integer32 .1.3.6.1.4.1.2636.5.4.1.1.2.1.7 |
jnxOspfv3AreaSummaryThe variable ospfv3AreaSummary controls the
import of Inter-Area LSAs into stub and
NSSA areas. It has no effect on other areas.
If it is noAreaSummary, the router will neither
originate nor propagate Inter-Area LSAs into the
stub or NSSA area. It will rely entirely on its
default route.
If it is sendAreaSummary, the router will both
summarize and propagate Inter-Area LSAs.rwdeprecated Enumeration .1.3.6.1.4.1.2636.5.4.1.1.2.1.8 |
jnxOspfv3AreaStatusThis object permits management of the table by
facilitating actions such as row creation,
construction and destruction.
The value of this object has no effect on
whether other objects in this conceptual row can be
modified.rwdeprecated RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2636.5.4.1.1.2.1.9 |
jnxOspfv3StubMetricThe metric value advertised for the default route
into Stub and NSSA areas.rwdeprecated BigMetric (OSPF-MIB) .1.3.6.1.4.1.2636.5.4.1.1.2.1.10 |
jnxOspfv3AreaNssaTranslatorRoleIndicates an NSSA Border router's ability to
perform NSSA translation of NSSA-LSAs into
AS-External-LSAs.rwdeprecated Enumeration .1.3.6.1.4.1.2636.5.4.1.1.2.1.11 |
jnxOspfv3AreaNssaTranslatorStateIndicates if and how an NSSA Border router is
performing NSSA translation of NSSA-LSAs into
AS-External-LSA's. When this object is set to enabled,
the NSSA Border router's ospfv3AreaNssTranslatorRole
has been set to always. When this object is set to
elected, a candidate NSSA Border router is translating
NSSA-LSA's into AS-External-LSA's. When this object is
set to disabled, a candidate NSSA Border router is NOT
translating NSSA-LSA's into AS-External-LSA's.rodeprecated Enumeration .1.3.6.1.4.1.2636.5.4.1.1.2.1.12 |
jnxOspfv3AreaNssaTranslatorStabIntThe number of seconds after an elected translator
determines its services are no longer required, that
it should continue to perform its translation duties.rwdeprecated Unsigned32 UNITS "seconds" .1.3.6.1.4.1.2636.5.4.1.1.2.1.13 |
jnxOspfv3AreaNssaTranslatorEventsIndicates the number of Translator State changes
that have occurred since the last boot-up.rodeprecated Counter32 .1.3.6.1.4.1.2636.5.4.1.1.2.1.14 |
jnxOspfv3AreaStubMetricTypeThis variable displays the type of metric
advertised as a default route.rwdeprecated Enumeration .1.3.6.1.4.1.2636.5.4.1.1.2.1.15 |
jnxOspfv3AsLsdbTableThe OSPFv3 Process's AS-Scope Link State Database.
Marking this table and its objects deprecated as it is now
implemented as a part of RFC 5643.deprecated SEQUENCE OF JnxOspfv3AsLsdbEntry .1.3.6.1.4.1.2636.5.4.1.1.3 |
jnxOspfv3AsLsdbEntryA single AS-Scope Link State Advertisement.deprecated JnxOspfv3AsLsdbEntry .1.3.6.1.4.1.2636.5.4.1.1.3.1 |
jnxOspfv3AsLsdbTypeThe type of the link state advertisement.
Each link state type has a separate
advertisement format. AS-Scope LSAs not recognized
by the router may be stored in the database.deprecated Unsigned32(0..'FFFFFFFF'h) .1.3.6.1.4.1.2636.5.4.1.1.3.1.1 |
jnxOspfv3AsLsdbRouterIdThe 32 bit number that uniquely identifies the
originating router in the Autonomous System.deprecated JnxOspfv3RouterIdTc .1.3.6.1.4.1.2636.5.4.1.1.3.1.2 |
jnxOspfv3AsLsdbLsidThe Link State ID is an LS Type Specific field
containing a unique identifier;
it identifies the piece of the routing domain
that is being described by the advertisement.
In contrast to OSPFv2, the LSID has no
addressing semantics.deprecated Unsigned32 .1.3.6.1.4.1.2636.5.4.1.1.3.1.3 |
jnxOspfv3AsLsdbSequenceThe sequence number field is a signed 32-bit
integer. It is used to detect old and duplicate
link state advertisements. The space of
sequence numbers is linearly ordered. The
larger the sequence number the more recent the
advertisement.rodeprecated Integer32 .1.3.6.1.4.1.2636.5.4.1.1.3.1.4 |
jnxOspfv3AsLsdbAgeThis field is the age of the link state
advertisement in seconds.rodeprecated Integer32 -- Should be 0..MaxAge -- unless DoNotAge bit is set UNITS "seconds" .1.3.6.1.4.1.2636.5.4.1.1.3.1.5 |
jnxOspfv3AsLsdbChecksumThis field is the checksum of the complete
contents of the advertisement, excepting the
age field. The age field is excepted so that
an advertisement's age can be incremented
without updating the checksum. The checksum
used is the same that is used for ISO
connectionless datagrams; it is commonly
referred to as the Fletcher checksum.rodeprecated Integer32 .1.3.6.1.4.1.2636.5.4.1.1.3.1.6 |
jnxOspfv3AsLsdbAdvertisementThe entire Link State Advertisement, including
its header.rodeprecated OCTET STRING .1.3.6.1.4.1.2636.5.4.1.1.3.1.7 |
jnxOspfv3AsLsdbTypeKnownIndicates whether the LSA type is recognized by
this Router.rodeprecated TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.5.4.1.1.3.1.8 |
jnxOspfv3AreaLsdbTableThe OSPFv3 Process's Area-Scope Link State Database.
Marking this table and its objects deprecated as it is
now implemented as a part of RFC 5643.deprecated SEQUENCE OF JnxOspfv3AreaLsdbEntry .1.3.6.1.4.1.2636.5.4.1.1.4 |
jnxOspfv3AreaLsdbEntryA single Area-Scope Link State Advertisement.deprecated JnxOspfv3AreaLsdbEntry .1.3.6.1.4.1.2636.5.4.1.1.4.1 |
jnxOspfv3AreaLsdbAreaIdThe 32-bit identifier of the Area from which the
LSA was received.deprecated JnxOspfv3AreaIdTc .1.3.6.1.4.1.2636.5.4.1.1.4.1.1 |
jnxOspfv3AreaLsdbTypeThe type of the link state advertisement.
Each link state type has a separate
advertisement format. Area-Scope LSAs unrecognized
by the router are also stored in this database.deprecated Unsigned32(0..'FFFFFFFF'h) .1.3.6.1.4.1.2636.5.4.1.1.4.1.2 |
jnxOspfv3AreaLsdbRouterIdThe 32-bit number that uniquely identifies the
originating router in the Autonomous System.deprecated JnxOspfv3RouterIdTc .1.3.6.1.4.1.2636.5.4.1.1.4.1.3 |
jnxOspfv3AreaLsdbLsidThe Link State ID is an LS Type Specific field
containing a unique identifier;
it identifies the piece of the routing domain
that is being described by the advertisement.
In contrast to OSPFv2, the LSID has no
addressing semantics.deprecated Unsigned32 .1.3.6.1.4.1.2636.5.4.1.1.4.1.4 |
jnxOspfv3AreaLsdbSequenceThe sequence number field is a signed 32-bit
integer. It is used to detect old and
duplicate link state advertisements. The space
of sequence numbers is linearly ordered. The
larger the sequence number the more recent the
advertisement.rodeprecated Integer32 .1.3.6.1.4.1.2636.5.4.1.1.4.1.5 |
jnxOspfv3AreaLsdbAgeThis field is the age of the link state
advertisement in seconds.rodeprecated Integer32 -- Should be 0..MaxAge -- unless DoNotAge bit is set UNITS "seconds" .1.3.6.1.4.1.2636.5.4.1.1.4.1.6 |
jnxOspfv3AreaLsdbChecksumThis field is the checksum of the complete
contents of the advertisement, excepting the
age field. The age field is excepted so that
an advertisement's age can be incremented
without updating the checksum. The checksum
used is the same that is used for ISO
connectionless datagrams; it is commonly
referred to as the Fletcher checksum.rodeprecated Integer32 .1.3.6.1.4.1.2636.5.4.1.1.4.1.7 |
jnxOspfv3AreaLsdbAdvertisementThe entire Link State Advertisement, including
its header.rodeprecated OCTET STRING .1.3.6.1.4.1.2636.5.4.1.1.4.1.8 |
jnxOspfv3AreaLsdbTypeKnownIndicates whether the LSA type is recognized
by this Router.rodeprecated TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.5.4.1.1.4.1.9 |
jnxOspfv3LinkLsdbTableThe OSPFv3 Process's Link-Scope Link State Database.
Marking this table and its objects deprecated as it is
now implemented as a part of RFC 5643.deprecated SEQUENCE OF JnxOspfv3LinkLsdbEntry .1.3.6.1.4.1.2636.5.4.1.1.5 |
jnxOspfv3LinkLsdbEntryA single Link-Scope Link State Advertisement.deprecated JnxOspfv3LinkLsdbEntry .1.3.6.1.4.1.2636.5.4.1.1.5.1 |
jnxOspfv3LinkLsdbIfIndexThe identifier of the link from which the LSA
was received.deprecated InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2636.5.4.1.1.5.1.1 |
jnxOspfv3LinkLsdbIfInstIdThe identifier of the interface instance from
which the LSA was received.deprecated JnxOspfv3IfInstIdTc .1.3.6.1.4.1.2636.5.4.1.1.5.1.2 |
jnxOspfv3LinkLsdbTypeThe type of the link state advertisement.
Each link state type has a separate
advertisement format. Link-Scope LSAs unrecognized
by the router are also stored in this database.deprecated Unsigned32(0..'FFFFFFFF'h) .1.3.6.1.4.1.2636.5.4.1.1.5.1.3 |
jnxOspfv3LinkLsdbRouterIdThe 32 bit number that uniquely identifies the
originating router in the Autonomous System.deprecated JnxOspfv3RouterIdTc .1.3.6.1.4.1.2636.5.4.1.1.5.1.4 |
jnxOspfv3LinkLsdbLsidThe Link State ID is an LS Type Specific field
containing a unique identifier;
it identifies the piece of the routing domain
that is being described by the advertisement.
In contrast to OSPFv2, the LSID has no
addressing semantics.deprecated Unsigned32 .1.3.6.1.4.1.2636.5.4.1.1.5.1.5 |
jnxOspfv3LinkLsdbSequenceThe sequence number field is a signed 32-bit
integer. It is used to detect old and duplicate
link state advertisements. The space of
sequence numbers is linearly ordered. The
larger the sequence number the more recent the
advertisement.rodeprecated Integer32 .1.3.6.1.4.1.2636.5.4.1.1.5.1.6 |
jnxOspfv3LinkLsdbAgeThis field is the age of the link state
advertisement in seconds.rodeprecated Integer32 -- Should be 0..MaxAge -- unless DoNotAge bit is set UNITS "seconds" .1.3.6.1.4.1.2636.5.4.1.1.5.1.7 |
jnxOspfv3LinkLsdbChecksumThis field is the checksum of the complete
contents of the advertisement, excepting the
age field. The age field is excepted so that
an advertisement's age can be incremented
without updating the checksum. The checksum
used is the same that is used for ISO
connectionless datagrams; it is commonly
referred to as the Fletcher checksum.rodeprecated Integer32 .1.3.6.1.4.1.2636.5.4.1.1.5.1.8 |
jnxOspfv3LinkLsdbAdvertisementThe entire Link State Advertisement, including
its header.rodeprecated OCTET STRING .1.3.6.1.4.1.2636.5.4.1.1.5.1.9 |
jnxOspfv3LinkLsdbTypeKnownIndicates whether the LSA type is recognized by this
Router.rodeprecated TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.5.4.1.1.5.1.10 |
jnxOspfv3HostTableThe list of Hosts, and their metrics, that the
router will advertise as host routes. Marking this
table and its objects deprecated as it is now implemented
as a part of RFC 5643.deprecated SEQUENCE OF JnxOspfv3HostEntry .1.3.6.1.4.1.2636.5.4.1.1.6 |
jnxOspfv3HostEntryA metric to be advertised when a given host is
reachable.deprecated JnxOspfv3HostEntry .1.3.6.1.4.1.2636.5.4.1.1.6.1 |
jnxOspfv3HostAddressTypeThe address type of ospfv3HostAddress. Only IPv6
addresses without zone index are expected.deprecated InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2636.5.4.1.1.6.1.1 |
jnxOspfv3HostAddressThe IPv6 Address of the Host. Must be a Global
address.deprecated InetAddress .1.3.6.1.4.1.2636.5.4.1.1.6.1.2 |
jnxOspfv3HostMetricThe Metric to be advertised.rwdeprecated Metric (OSPF-MIB) .1.3.6.1.4.1.2636.5.4.1.1.6.1.3 |
jnxOspfv3HostStatusThis object permits management of the table by
facilitating actions such as row creation,
construction and destruction.
The value of this object has no effect on
whether other objects in this conceptual row can be
modified.rwdeprecated RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2636.5.4.1.1.6.1.4 |
jnxOspfv3HostAreaIDThe Area the Host Entry is to be found within.
By default, the area that a subsuming OSPFv3
interface is in, or Area 0rwdeprecated JnxOspfv3AreaIdTc .1.3.6.1.4.1.2636.5.4.1.1.6.1.5 |
jnxOspfv3IfTableThe OSPFv3 Interface Table describes the
interfaces from the viewpoint of OSPFv3. Marking this table
and its objects deprecated as it is now implemented as
a part of RFC 5643.deprecated SEQUENCE OF JnxOspfv3IfEntry .1.3.6.1.4.1.2636.5.4.1.1.7 |
jnxOspfv3IfEntryThe OSPFv3 Interface Entry describes one
interface from the viewpoint of OSPFv3.deprecated JnxOspfv3IfEntry .1.3.6.1.4.1.2636.5.4.1.1.7.1 |
jnxOspfv3IfIndexThe interface index of this OSPFv3 interface.
It corresponds to the interface index of the
IPv6 interface on which OSPFv3 is configured.deprecated InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2636.5.4.1.1.7.1.1 |
jnxOspfv3IfInstIdEnables multiple interface instances of OSPFv3
to be run over a single link. Each protocol
instance would be assigned a separate ID. This ID
has local link significance only.deprecated JnxOspfv3IfInstIdTc .1.3.6.1.4.1.2636.5.4.1.1.7.1.2 |
jnxOspfv3IfAreaIdA 32-bit integer uniquely identifying the area
to which the interface connects. Area ID
0 is used for the OSPFv3 backbone.rwdeprecated JnxOspfv3AreaIdTc .1.3.6.1.4.1.2636.5.4.1.1.7.1.3 |
jnxOspfv3IfTypeThe OSPFv3 interface type.rwdeprecated Enumeration .1.3.6.1.4.1.2636.5.4.1.1.7.1.4 |
jnxOspfv3IfAdminStatThe OSPFv3 interface's administrative status.
The value formed on the interface, and the
interface will be advertised as an internal route
to some area. The value 'disabled' denotes
that the interface is external to OSPFv3.rwdeprecated Status (OSPF-MIB) .1.3.6.1.4.1.2636.5.4.1.1.7.1.5 |
jnxOspfv3IfRtrPriorityThe priority of this interface. Used in
multi-access networks, this field is used in
the designated router election algorithm. The
value 0 signifies that the router is not
eligible to become the designated router on this
particular network. In the event of a tie in
this value, routers will use their Router ID as
a tie breaker.rwdeprecated DesignatedRouterPriority (OSPF-MIB) .1.3.6.1.4.1.2636.5.4.1.1.7.1.6 |
jnxOspfv3IfTransitDelayThe estimated number of seconds it takes to
transmit a link state update packet over this
interface.rwdeprecated JnxOspfv3UpToRefreshIntervalTc UNITS "seconds" .1.3.6.1.4.1.2636.5.4.1.1.7.1.7 |
jnxOspfv3IfRetransIntervalThe number of seconds between link state
advertisement retransmissions, for adjacencies
belonging to this interface. This value is
also used when retransmitting database
description and link state request packets.rwdeprecated JnxOspfv3UpToRefreshIntervalTc UNITS "seconds" .1.3.6.1.4.1.2636.5.4.1.1.7.1.8 |
jnxOspfv3IfHelloIntervalThe length of time, in seconds, between the
Hello packets that the router sends on the
interface. This value must be the same for all
routers attached to a common network.rwdeprecated HelloRange UNITS "seconds" .1.3.6.1.4.1.2636.5.4.1.1.7.1.9 |
jnxOspfv3IfRtrDeadIntervalThe number of seconds that a router's Hello
packets have not been seen before its
neighbors declare the router down on the interface.
This should be some multiple of the Hello interval.
This value must be the same for all routers attached
to a common network.rwdeprecated JnxOspfv3DeadIntRangeTc UNITS "seconds" .1.3.6.1.4.1.2636.5.4.1.1.7.1.10 |
jnxOspfv3IfPollIntervalThe larger time interval, in seconds, between
the Hello packets sent to an inactive
non-broadcast multi-access neighbor.rwdeprecated Unsigned32 UNITS "seconds" .1.3.6.1.4.1.2636.5.4.1.1.7.1.11 |
jnxOspfv3IfStateThe OSPFv3 Interface State.rodeprecated Enumeration .1.3.6.1.4.1.2636.5.4.1.1.7.1.12 |
jnxOspfv3IfDesignatedRouterThe Router ID of the Designated Router.rodeprecated JnxOspfv3RouterIdTc .1.3.6.1.4.1.2636.5.4.1.1.7.1.13 |
jnxOspfv3IfBackupDesignatedRouterThe Router ID of the Backup Designated
Router.rodeprecated JnxOspfv3RouterIdTc .1.3.6.1.4.1.2636.5.4.1.1.7.1.14 |
jnxOspfv3IfEventsThe number of times this OSPF interface has
changed its state, or an error has occurred.rodeprecated Counter32 .1.3.6.1.4.1.2636.5.4.1.1.7.1.15 |
jnxOspfv3IfStatusThis object permits management of the table by
facilitating actions such as row creation,
construction and destruction.
The value of this object has no effect on
whether other objects in this conceptual row can be
modified.rwdeprecated RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2636.5.4.1.1.7.1.16 |
jnxOspfv3IfMulticastForwardingThe way multicasts should forwarded on this
interface; not forwarded, forwarded as data
link multicasts, or forwarded as data link
unicasts. Data link multicasting is not
meaningful on point to point and NBMA interfaces,
and setting ospfv3MulticastForwarding to 0
effectively disables all multicast forwarding.rwdeprecated Enumeration .1.3.6.1.4.1.2636.5.4.1.1.7.1.17 |
jnxOspfv3IfDemandIndicates whether Demand OSPFv3 procedures
(hello suppression to FULL neighbors and
setting the DoNotAge flag on propagated LSAs)
should be performed on this interface.rwdeprecated TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.5.4.1.1.7.1.18 |
jnxOspfv3IfMetricValueThe metric assigned to this interface.
The default value of the Metric is
Reference Bandwidth / ifSpeed. The value
of the reference bandwidth is configured
by the ospfv3ReferenceBandwidth object.rwdeprecated Metric (OSPF-MIB) .1.3.6.1.4.1.2636.5.4.1.1.7.1.19 |
jnxOspfv3IfLinkScopeLsaCountThe total number of Link-Scope link state
advertisements in this link's link state
database.rodeprecated Gauge32 .1.3.6.1.4.1.2636.5.4.1.1.7.1.20 |
jnxOspfv3IfLinkLsaCksumSumThe 32-bit unsigned sum of the Link-Scope link state
advertisements' LS checksums contained in this
link's link state database. The sum can be used
to determine if there has been a change in a
router's link state database, and to compare the
link state database of two routers.rodeprecated Integer32 .1.3.6.1.4.1.2636.5.4.1.1.7.1.21 |
jnxOspfv3IfDemandNbrProbeIndicates whether or not neighbor probing is
enabled to determine whether or not the neighbor
is inactive. Neighbor probing is disabled by
default.rwdeprecated TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.5.4.1.1.7.1.22 |
jnxOspfv3IfDemandNbrProbeRetxLimitThe number of consecutive LSA retransmissions before
the neighbor is deemed inactive and the neighbor
adjacency is brought down.rwdeprecated Unsigned32 UNITS "seconds" .1.3.6.1.4.1.2636.5.4.1.1.7.1.23 |
jnxOspfv3IfDemandNbrProbeIntervalDefines how often the neighbor will be probed.rwdeprecated Unsigned32 UNITS "seconds" .1.3.6.1.4.1.2636.5.4.1.1.7.1.24 |
jnxOspfv3VirtIfTableInformation about this router's virtual
interfaces. Marking this table and its objects
deprecated as it is now implemented as a part of RFC 5643.deprecated SEQUENCE OF JnxOspfv3VirtIfEntry .1.3.6.1.4.1.2636.5.4.1.1.8 |
jnxOspfv3VirtIfEntryInformation about a single Virtual Interface.deprecated JnxOspfv3VirtIfEntry .1.3.6.1.4.1.2636.5.4.1.1.8.1 |
jnxOspfv3VirtIfAreaIdThe Transit Area that the Virtual Link
traverses. By definition, this is not
Area 0deprecated JnxOspfv3AreaIdTc .1.3.6.1.4.1.2636.5.4.1.1.8.1.1 |
jnxOspfv3VirtIfNeighborThe Router ID of the Virtual Neighbor.deprecated JnxOspfv3RouterIdTc .1.3.6.1.4.1.2636.5.4.1.1.8.1.2 |
jnxOspfv3VirtIfIndexThe local interface index assigned to this
OSPFv3 virtual interface. It is advertised in
Hello's sent over the virtal link and in the
router's router-LSAs.rodeprecated InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2636.5.4.1.1.8.1.3 |
jnxOspfv3VirtIfInstIdSpecifies the interface instance ID to be used
for the virtual interface. This ID has local link
significance only.rwdeprecated JnxOspfv3IfInstIdTc .1.3.6.1.4.1.2636.5.4.1.1.8.1.4 |
jnxOspfv3VirtIfTransitDelayThe estimated number of seconds it takes to
transmit a link state update packet over this
interface.rwdeprecated JnxOspfv3UpToRefreshIntervalTc UNITS "seconds" .1.3.6.1.4.1.2636.5.4.1.1.8.1.5 |
jnxOspfv3VirtIfRetransIntervalThe number of seconds between link state
advertisement retransmissions, for adjacencies
belonging to this interface. This value is
also used when retransmitting database
description and link state request packets. This
value should be well over the expected
round-trip time.rwdeprecated JnxOspfv3UpToRefreshIntervalTc UNITS "seconds" .1.3.6.1.4.1.2636.5.4.1.1.8.1.6 |
jnxOspfv3VirtIfHelloIntervalThe length of time, in seconds, between the
Hello packets that the router sends on the
interface. This value must be the same for the
virtual neighbor.rwdeprecated HelloRange UNITS "seconds" .1.3.6.1.4.1.2636.5.4.1.1.8.1.7 |
jnxOspfv3VirtIfRtrDeadIntervalThe number of seconds that a router's Hello
packets have not been seen before its
neighbors declare the router down. This should
be some multiple of the Hello interval. This
value must be the same for the virtual
neighbor.rwdeprecated JnxOspfv3DeadIntRangeTc UNITS "seconds" .1.3.6.1.4.1.2636.5.4.1.1.8.1.8 |
jnxOspfv3VirtIfStateospf virtual interface states. The same encoding
as the ospfV3IfTable is used.rodeprecated Enumeration .1.3.6.1.4.1.2636.5.4.1.1.8.1.9 |
jnxOspfv3VirtIfEventsThe number of state changes or error events on
this Virtual Linkrodeprecated Counter32 .1.3.6.1.4.1.2636.5.4.1.1.8.1.10 |
jnxOspfv3VirtIfStatusThis object permits management of the table by
facilitating actions such as row creation,
construction and destruction.
The value of this object has no effect on
whether other objects in this conceptual row can be
modified.rwdeprecated RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2636.5.4.1.1.8.1.11 |
jnxOspfv3VirtIfLinkScopeLsaCountThe total number of Link-Scope link state
advertisements in this virtual link's link state
database.rodeprecated Gauge32 .1.3.6.1.4.1.2636.5.4.1.1.8.1.12 |
jnxOspfv3VirtIfLinkLsaCksumSumThe 32-bit unsigned sum of the Link-Scope link-state
advertisements' LS checksums contained in this
virtual link's link-state database. The sum can be used
to determine if there has been a change in a
router's link state database, and to compare the
link state database of two routers.rodeprecated Integer32 .1.3.6.1.4.1.2636.5.4.1.1.8.1.13 |
jnxOspfv3NbrTableA table of non-virtual neighbor information.deprecated SEQUENCE OF JnxOspfv3NbrEntry .1.3.6.1.4.1.2636.5.4.1.1.9 |
jnxOspfv3NbrEntryThe information regarding a single neighbor.deprecated JnxOspfv3NbrEntry .1.3.6.1.4.1.2636.5.4.1.1.9.1 |
jnxOspfv3NbrIfIndexThe local link ID of the link over which the
neighbor can be reached.deprecated InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2636.5.4.1.1.9.1.1 |
jnxOspfv3NbrIfInstIdInterface instance over which the neighbor
can be reached. This ID has local link
significance only.deprecated JnxOspfv3IfInstIdTc .1.3.6.1.4.1.2636.5.4.1.1.9.1.2 |
jnxOspfv3NbrRtrIdA 32-bit integer uniquely identifying the neighboring
router in the Autonomous System.deprecated JnxOspfv3RouterIdTc .1.3.6.1.4.1.2636.5.4.1.1.9.1.3 |
jnxOspfv3NbrAddressTypeThe address type of ospfv3NbrAddress. Only IPv6
addresses without zone index are expected.rodeprecated InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2636.5.4.1.1.9.1.4 |
jnxOspfv3NbrAddressThe IPv6 address of the neighbor associated with
the local link.rodeprecated InetAddress .1.3.6.1.4.1.2636.5.4.1.1.9.1.5 |
jnxOspfv3NbrOptionsA Bit Mask corresponding to the neighbor's
options field.rodeprecated Integer32 .1.3.6.1.4.1.2636.5.4.1.1.9.1.6 |
jnxOspfv3NbrPriorityThe priority of this neighbor in the designated
router election algorithm. The value 0 signifies
that the neighbor is not eligible to become the
designated router on this particular network.rodeprecated DesignatedRouterPriority (OSPF-MIB) .1.3.6.1.4.1.2636.5.4.1.1.9.1.7 |
jnxOspfv3NbrStateThe State of the relationship with this
Neighbor.rodeprecated Enumeration .1.3.6.1.4.1.2636.5.4.1.1.9.1.8 |
jnxOspfv3NbrEventsThe number of times this neighbor relationship
has changed state, or an error has occurred.rodeprecated Counter32 .1.3.6.1.4.1.2636.5.4.1.1.9.1.9 |
jnxOspfv3NbrLsRetransQLenThe current length of the retransmission
queue.rodeprecated Gauge32 .1.3.6.1.4.1.2636.5.4.1.1.9.1.10 |
jnxOspfv3NbrHelloSuppressedIndicates whether Hellos are being suppressed
to the neighborrodeprecated TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.5.4.1.1.9.1.11 |
jnxOspfv3NbrIfIdThe interface ID that the neighbor advertises
in its Hello Packets on this link, that is, the
neighbor's local interface index.rodeprecated InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2636.5.4.1.1.9.1.12 |
jnxOspfv3NbrRestartHelperStatusIndicates whether the router is acting
as a Graceful restart helper for the neighbor.rodeprecated Enumeration .1.3.6.1.4.1.2636.5.4.1.1.9.1.13 |
jnxOspfv3NbrRestartHelperAgeRemaining time in current OSPF Graceful restart
interval, if the router is acting as a restart
helper for the neighbor.rodeprecated JnxOspfv3UpToRefreshIntervalTc UNITS "seconds" .1.3.6.1.4.1.2636.5.4.1.1.9.1.14 |
jnxOspfv3NbrRestartHelperExitRcDescribes the outcome of the last attempt at acting
as a Graceful restart helper for the neighbor.
none:............no restart has yet been attempted.
inProgress:......a restart attempt is currentlyly underway.
completed:.......the last restart completed successfully.
timedOut:........the last restart timed out.
topologyChanged:.the last restart was aborted due to
a topology change.rodeprecated Enumeration .1.3.6.1.4.1.2636.5.4.1.1.9.1.15 |
jnxOspfv3CfgNbrTableA table of configured, non-virtual neighbor
information. Marking this table and its objects
deprecated as it is now implemented as a part of RFC 5643.deprecated SEQUENCE OF JnxOspfv3CfgNbrEntry .1.3.6.1.4.1.2636.5.4.1.1.10 |
jnxOspfv3CfgNbrEntryThe information regarding a single configured
neighbor or neighbor discovered by lower-level
protocols such as Inverse Neighbor Discovery.deprecated JnxOspfv3CfgNbrEntry .1.3.6.1.4.1.2636.5.4.1.1.10.1 |
jnxOspfv3CfgNbrIfIndexThe local link ID of the link over which the
neighbor can be reached.deprecated InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2636.5.4.1.1.10.1.1 |
jnxOspfv3CfgNbrIfInstIdInterface instance over which the neighbor
can be reached. This ID has local link
significance only.deprecated JnxOspfv3IfInstIdTc .1.3.6.1.4.1.2636.5.4.1.1.10.1.2 |
jnxOspfv3CfgNbrAddressTypeThe address type of ospfv3NbrAddress. Only IPv6
addresses without zone index are expected.deprecated InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2636.5.4.1.1.10.1.3 |
jnxOspfv3CfgNbrAddressThe IPv6 address of the neighbor associated with
the local link.deprecated InetAddress .1.3.6.1.4.1.2636.5.4.1.1.10.1.4 |
jnxOspfv3CfgNbrPriorityThe priority of this neighbor in the designated
router election algorithm. The value 0 signifies
that the neighbor is not eligible to become the
designated router on this particular network.rwdeprecated DesignatedRouterPriority (OSPF-MIB) .1.3.6.1.4.1.2636.5.4.1.1.10.1.5 |
jnxOspfv3CfgNbrStatusThis object permits management of the table by
facilitating actions such as row creation,
construction and destruction.
The value of this object has no effect on
whether other objects in this conceptual row can be
modified.rwdeprecated RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2636.5.4.1.1.10.1.6 |
jnxOspfv3VirtNbrTableA table of virtual neighbor information. Marking this
table and its objects deprecated as it is now
implemented as a part of RFC 5643.deprecated SEQUENCE OF JnxOspfv3VirtNbrEntry .1.3.6.1.4.1.2636.5.4.1.1.11 |
jnxOspfv3VirtNbrEntryVirtual neighbor information.deprecated JnxOspfv3VirtNbrEntry .1.3.6.1.4.1.2636.5.4.1.1.11.1 |
jnxOspfv3VirtNbrAreaThe Transit Area Identifier.deprecated JnxOspfv3AreaIdTc .1.3.6.1.4.1.2636.5.4.1.1.11.1.1 |
jnxOspfv3VirtNbrRtrIdA 32-bit integer uniquely identifying the
neighboring router in the Autonomous System.deprecated JnxOspfv3RouterIdTc .1.3.6.1.4.1.2636.5.4.1.1.11.1.2 |
jnxOspfv3VirtNbrIfIndexThe local interface ID for the virtual link over
which the neighbor can be reached.rodeprecated InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2636.5.4.1.1.11.1.3 |
jnxOspfv3VirtNbrIfInstIdThe interface instance for the virtual link over
which the neighbor can be reached.rodeprecated JnxOspfv3IfInstIdTc .1.3.6.1.4.1.2636.5.4.1.1.11.1.4 |
jnxOspfv3VirtNbrAddressTypeThe address type of ospfv3VirtNbrAddress. Only IPv6
addresses without zone index are expected.rodeprecated InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2636.5.4.1.1.11.1.5 |
jnxOspfv3VirtNbrAddressThe IPv6 address advertised by this Virtual Neighbor.
It must be a Global scope address.rodeprecated InetAddress .1.3.6.1.4.1.2636.5.4.1.1.11.1.6 |
jnxOspfv3VirtNbrOptionsA Bit Mask corresponding to the neighbor's options
field.rodeprecated Integer32 .1.3.6.1.4.1.2636.5.4.1.1.11.1.7 |
jnxOspfv3VirtNbrStateThe state of the Virtual Neighbor Relationship.rodeprecated Enumeration .1.3.6.1.4.1.2636.5.4.1.1.11.1.8 |
jnxOspfv3VirtNbrEventsThe number of times this virtual link has
changed its state, or an error has occurred.rodeprecated Counter32 .1.3.6.1.4.1.2636.5.4.1.1.11.1.9 |
jnxOspfv3VirtNbrLsRetransQLenThe current length of the retransmission
queue.rodeprecated Gauge32 .1.3.6.1.4.1.2636.5.4.1.1.11.1.10 |
jnxOspfv3VirtNbrHelloSuppressedIndicates whether Hellos are being suppressed
to the neighborrodeprecated TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.5.4.1.1.11.1.11 |
jnxOspfv3VirtNbrIfIdThe interface ID that the neighbor advertises
in its Hello Packets on this virtual link, that is,
the neighbor's local interface ID.rodeprecated InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2636.5.4.1.1.11.1.12 |
jnxOspfv3VirtNbrRestartHelperStatusIndicates whether the router is acting
as a Graceful restart helper for the neighbor.rodeprecated Enumeration .1.3.6.1.4.1.2636.5.4.1.1.11.1.13 |
jnxOspfv3VirtNbrRestartHelperAgeRemaining time in current OSPF Graceful restart
interval, if the router is acting as a restart
helper for the neighbor.rodeprecated JnxOspfv3UpToRefreshIntervalTc UNITS "seconds" .1.3.6.1.4.1.2636.5.4.1.1.11.1.14 |
jnxOspfv3VirtNbrRestartHelperExitRcDescribes the outcome of the last attempt at acting
as a Graceful restart helper for the neighbor.
none:............no restart has yet been attempted.
inProgress:......a restart attempt is currently underway.
completed:.......the last restart completed successfully.
timedOut:........the last restart timed out.
topologyChanged:.the last restart was aborted due to
a topology change.rodeprecated Enumeration .1.3.6.1.4.1.2636.5.4.1.1.11.1.15 |
jnxOspfv3AreaAggregateTableA range of IPv6 prefixes specified by a
prefix/prefix length pair. Note that if
ranges are configured such that one range
subsumes another range the most specific
match is the preferred one. Marking this table
and its objects deprecated as it is now implemented
as part of RFC 5643.deprecated SEQUENCE OF JnxOspfv3AreaAggregateEntry .1.3.6.1.4.1.2636.5.4.1.1.12 |
jnxOspfv3AreaAggregateEntryA range of IPv6 prefixes specified by a
prefix/prefix length pair. Note that if
ranges are configured such that one range
subsumes another range the most specific match is
the preferred one.deprecated JnxOspfv3AreaAggregateEntry .1.3.6.1.4.1.2636.5.4.1.1.12.1 |
jnxOspfv3AreaAggregateAreaIDThe Area the Address Aggregate is to be found
within.deprecated JnxOspfv3AreaIdTc .1.3.6.1.4.1.2636.5.4.1.1.12.1.1 |
jnxOspfv3AreaAggregateAreaLsdbTypeThe type of the Address Aggregate. This field
specifies the Area Lsdb type that this Address
Aggregate applies to.deprecated Enumeration .1.3.6.1.4.1.2636.5.4.1.1.12.1.2 |
jnxOspfv3AreaAggregatePrefixTypeThe prefix type of ospfv3AreaAggregatePrefix. Only
IPv6 addresses are expected.deprecated InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2636.5.4.1.1.12.1.4 |
jnxOspfv3AreaAggregatePrefixThe IPv6 Prefix.deprecated InetAddress .1.3.6.1.4.1.2636.5.4.1.1.12.1.5 |
jnxOspfv3AreaAggregatePrefixLengthThe length of the prefix (in bits). A prefix can
not be shorter than 3 bits.deprecated InetAddressPrefixLength .1.3.6.1.4.1.2636.5.4.1.1.12.1.6 |
jnxOspfv3AreaAggregateStatusThis object permits management of the table by
facilitating actions such as row creation,
construction and destruction.
The value of this object has no effect on
whether other objects in this conceptual row can be
modified.rwdeprecated RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2636.5.4.1.1.12.1.7 |
jnxOspfv3AreaAggregateEffectPrefixes subsumed by ranges either trigger the
advertisement of the indicated aggregate
(advertiseMatching), or result in the prefix not
being advertised at all outside the area.rwdeprecated Enumeration .1.3.6.1.4.1.2636.5.4.1.1.12.1.8 |
jnxOspfv3AreaAggregateRouteTagThis tag is advertised only in the summarized
As-External LSA when summarizing from NSSA-LSA's to
AS-External-LSA's.rwdeprecated INTEGER .1.3.6.1.4.1.2636.5.4.1.1.12.1.9 |
jnxOspfv3NotificationEntry OBJECT IDENTIFIER .1.3.6.1.4.1.2636.5.4.1.1.13 |
jnxOspfv3ConfigErrorTypePotential types of configuration conflicts.
Used by the ospfv3ConfigError and
ospfv3ConfigVirtError notifications. When the last value
of a notification using this object is needed, but no
notifications of that type have been sent, this value
pertaining to this object should be returned as
noErrorrodeprecated Enumeration .1.3.6.1.4.1.2636.5.4.1.1.13.1 |
jnxOspfv3PacketTypeOSPFv3 packet types. When the last value of a notification
using this object is needed, but no notifications of
that type have been sent, the value pertaining
to this object should be returned as nullPacketrodeprecated Enumeration .1.3.6.1.4.1.2636.5.4.1.1.13.2 |
jnxOspfv3PacketSrcThe IPv6 address of an inbound packet that cannot
be identified by a neighbor instance. When
the last value of a notification using this object is
needed, but no notifications of that type have been sent,
the value pertaining to this object should
be returned as 0
Only IPv6 addresses without zone index are expected.rodeprecated InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2636.5.4.1.1.13.3 |
jnxOspfv3Conformance OBJECT IDENTIFIER .1.3.6.1.4.1.2636.5.4.1.2 |
jnxOspfv3Groups OBJECT IDENTIFIER .1.3.6.1.4.1.2636.5.4.1.2.1 |
jnxOspfv3Compliances OBJECT IDENTIFIER .1.3.6.1.4.1.2636.5.4.1.2.2 |