OSPF-TE-DRAFT00-MIB
AI MIB Summary
The OSPF-TE-DRAFT00-MIB extends the standard OSPF MIB to enable monitoring of Traffic Engineering-specific metrics, including link attributes, bandwidth availability, and TE metric values required for constrained shortest path first (CSPF) calculations. This module facilitates the collection of data necessary for traffic engineering applications to optimize routing paths and manage network resource utilization within OSPF domains.
This MIB contains managed object definitions for extensions to the OSPF MIB in support of Traffic Engienering (TE).
Copyright (C) The Internet Society (2006). This version of this MIB module is part of RFCXXX; see the RFC itself for full legal notices.
Main OID:
ospfTeMIB.1.3.6.1.2.1.10.9988
58
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
58 total| Object Name |
|---|
ospfTeMIBThis MIB contains managed object definitions for
extensions to the OSPF MIB in support of Traffic
Engienering (TE).
Copyright (C) The Internet Society (2006). This
version of this MIB module is part of RFCXXX; see
the RFC itself for full legal notices. MODULE-IDENTITY .1.3.6.1.2.1.10.9988 |
ospfTeNotifications OBJECT IDENTIFIER .1.3.6.1.2.1.10.9988.0 |
ospfTeObjects OBJECT IDENTIFIER .1.3.6.1.2.1.10.9988.1 |
ospfTeScalars OBJECT IDENTIFIER .1.3.6.1.2.1.10.9988.1.1 |
ospfTeTables OBJECT IDENTIFIER .1.3.6.1.2.1.10.9988.1.2 |
ospfTeLsdbTableThis table indicates multiple sub-TLVs information in opaque
LSA which have been supported by [OSPF-TE]. SEQUENCE OF OspfTeLsdbEntry .1.3.6.1.2.1.10.9988.1.2.1 |
ospfTeLsdbEntryThis entry contains each sub-TLVs information commonly utilized
in both MPLS and GMPLS OspfTeLsdbEntry .1.3.6.1.2.1.10.9988.1.2.1.1 |
ospfTeLinkTypeThis indicates the type of the link such as point-to-point
or multi-accessro Enumeration .1.3.6.1.2.1.10.9988.1.2.1.1.1 |
ospfTeSrlgIndexThis index is utilized to identify multiple SRLG values on a
local or remote TE link. Unsigned32 .1.3.6.1.2.1.10.9988.1.2.1.1.1 |
ospfTeLinkIdAddrThis indicates the Router ID of the neighbor in the case
of point-to-point links. This also indicates the interface address
of the designated router in the case of multi-access links.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.2.1.10.9988.1.2.1.1.2 |
ospfTeLinkIdAddrTypeThis object indicates the type of TE link ID address.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.2.1.10.9988.1.2.1.1.3 |
ospfTeMetricThis indicates the traffic engineering metric value of the
TE link.ro Integer32 .1.3.6.1.2.1.10.9988.1.2.1.1.4 |
ospfTeMaxBandwidthThis indicates the maximum bandwidth that
can be used on this link in this directionro Unsigned32 .1.3.6.1.2.1.10.9988.1.2.1.1.5 |
ospfTeMaxReservableBandwidthThis indicates the maximum bandwidth that may be reserved on
this link in this directionro Unsigned32 .1.3.6.1.2.1.10.9988.1.2.1.1.6 |
ospfTeUnreservedBandwidthPri0This indicates the amount of bandwidth not yet reserved at
the priority 0ro Unsigned32 .1.3.6.1.2.1.10.9988.1.2.1.1.7 |
ospfTeUnreservedBandwidthPri1This indicates the amount of bandwidth not yet reserved at
the priority 1ro Unsigned32 .1.3.6.1.2.1.10.9988.1.2.1.1.8 |
ospfTeUnreservedBandwidthPri2This indicates the amount of bandwidth not yet reserved at
the priority 2ro Unsigned32 .1.3.6.1.2.1.10.9988.1.2.1.1.9 |
ospfTeUnreservedBandwidthPri3This indicates the amount of bandwidth not yet reserved at
the priority 3ro Unsigned32 .1.3.6.1.2.1.10.9988.1.2.1.1.10 |
ospfTeUnreservedBandwidthPri4This indicates the amount of bandwidth not yet reserved at
the priority 4ro Unsigned32 .1.3.6.1.2.1.10.9988.1.2.1.1.11 |
ospfTeUnreservedBandwidthPri5This indicates the amount of bandwidth not yet reserved at
the priority 5ro Unsigned32 .1.3.6.1.2.1.10.9988.1.2.1.1.12 |
ospfTeUnreservedBandwidthPri6This indicates the amount of bandwidth not yet reserved at
the priority 6ro Unsigned32 .1.3.6.1.2.1.10.9988.1.2.1.1.13 |
ospfTeUnreservedBandwidthPri7This indicates the amount of bandwidth not yet reserved at
the priority 7ro Unsigned32 .1.3.6.1.2.1.10.9988.1.2.1.1.14 |
ospfTeAdministrativeGroupThis indicates the Administrative Group which the link
belong to. Since the value is a bit mask, the link can belong to
multiple groups. This is also called Resource Class/Color.ro Integer32 .1.3.6.1.2.1.10.9988.1.2.1.1.15 |
ospfTeLocalIdThis indicates the Link local identifier of an unnumbered
link.ro Unsigned32 .1.3.6.1.2.1.10.9988.1.2.1.1.16 |
ospfTeRemoteIdThis indicates the Link remote identifier of an unnumbered
link.ro Unsigned32 .1.3.6.1.2.1.10.9988.1.2.1.1.17 |
ospfTeLinkProtectionTypeThis object indicates the protection type of the TE linkro Enumeration .1.3.6.1.2.1.10.9988.1.2.1.1.18 |
ospfTeLocalIntAddrTableThis table contains the IP address information of a local TE
link. SEQUENCE OF OspfTeLocalIntAddrEntry .1.3.6.1.2.1.10.9988.1.2.2 |
ospfTeLocalIntAddrEntryThis entry contains the IP address information of the local
TE link. OspfTeLocalIntAddrEntry .1.3.6.1.2.1.10.9988.1.2.2.1 |
ospfTeLocalIntAddrIndexThis indicates the index to identify multiple local TE links Unsigned32 .1.3.6.1.2.1.10.9988.1.2.2.1.1 |
ospfTeLocalIntAddrThis object indicates the address of the local TE link.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.2.1.10.9988.1.2.2.1.2 |
ospfTeLocalIntAddrTypeThis object indicates the type of local TE link address.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.2.1.10.9988.1.2.2.1.3 |
ospfTeRemoteIntAddrTableThis table contains the IP address information of a remote
TE link. SEQUENCE OF OspfTeRemoteIntAddrEntry .1.3.6.1.2.1.10.9988.1.2.3 |
ospfTeRemoteIntAddrEntryThis entry contains the IP address information of the remote
TE link. OspfTeRemoteIntAddrEntry .1.3.6.1.2.1.10.9988.1.2.3.1 |
ospfTeRemoteIntAddrIndexThis indicates the index to identify multiple remote TE
links. Unsigned32 .1.3.6.1.2.1.10.9988.1.2.3.1.1 |
ospfTeRemoteIntAddrThis object indicates the address of the remote TE link.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.2.1.10.9988.1.2.3.1.2 |
ospfTeRemoteIntAddrTypeThis object indicates the type of the remote TE link
address.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.2.1.10.9988.1.2.3.1.3 |
ospfTeSwCapTableThis table contains the GMPLS OSPF TE switching capability
information. SEQUENCE OF OspfTeSwCapEntry .1.3.6.1.2.1.10.9988.1.2.4 |
ospfTeSwCapEntryThis entry relates each TE link with its GMPLS TE switching
capability information. IF the MIB deals with only OSPF-TE
information, the value of each object related with GMPLS TE
extensions should be null. OspfTeSwCapEntry .1.3.6.1.2.1.10.9988.1.2.4.1 |
ospfTeSwCapIndexThis index is utilized to identify multiple switching
functions on a local or remote TE link. Unsigned32 .1.3.6.1.2.1.10.9988.1.2.4.1.1 |
ospfTeSwitchingTypeThis object indicates the GMPLS switching capability
assigned to the TE link.ro Enumeration .1.3.6.1.2.1.10.9988.1.2.4.1.2 |
ospfTeEncodingThis object indicates the GMPLS encoding type assigned to
the TE link.ro Enumeration .1.3.6.1.2.1.10.9988.1.2.4.1.3 |
ospfTeMaxLspBandwidthPri0This object indicates the maximum bandwidth of the TE link
at the priority 0 for GMPLS LSP creation.ro Unsigned32 .1.3.6.1.2.1.10.9988.1.2.4.1.4 |
ospfTeMaxLspBandwidthPri1This object indicates the maximum bandwidth of the TE link
at the priority 1 for GMPLS LSP creation.ro Unsigned32 .1.3.6.1.2.1.10.9988.1.2.4.1.5 |
ospfTeMaxLspBandwidthPri2This object indicates the maximum bandwidth of the TE link
at the priority 2 for GMPLS LSP creation.ro Unsigned32 .1.3.6.1.2.1.10.9988.1.2.4.1.6 |
ospfTeMaxLspBandwidthPri3This object indicates the maximum bandwidth of the TE link
at the priority 3 for GMPLS LSP creation.ro Unsigned32 .1.3.6.1.2.1.10.9988.1.2.4.1.7 |
ospfTeMaxLspBandwidthPri4This object indicates the maximum bandwidth of the TE link
at the priority 4 for GMPLS LSP creation.ro Unsigned32 .1.3.6.1.2.1.10.9988.1.2.4.1.8 |
ospfTeMaxLspBandwidthPri5This object indicates the maximum bandwidth of the TE link
at the priority 5 for GMPLS LSP creation.ro Unsigned32 .1.3.6.1.2.1.10.9988.1.2.4.1.9 |
ospfTeMaxLspBandwidthPri6This object indicates the maximum bandwidth of the TE link
at the priority 6 for GMPLS LSP creation.ro Unsigned32 .1.3.6.1.2.1.10.9988.1.2.4.1.10 |
ospfTeMaxLspBandwidthPri7This object indicates the maximum bandwidth of the TE link
at the priority 7 for GMPLS LSP creation.ro Unsigned32 .1.3.6.1.2.1.10.9988.1.2.4.1.11 |
ospfTeLspMinBandwidthThis object indicates the minimum bandwidth of the TE link
for GMPLS LSP creation if the switching capability field is TDM, PSC-
1, PSC-2, PSC-3, or PSC-4.ro Unsigned32 .1.3.6.1.2.1.10.9988.1.2.4.1.12 |
ospfTeIntMtuThis object indicates the MTU of the local or remote TE
linkrw Integer32 .1.3.6.1.2.1.10.9988.1.2.4.1.13 |
ospfTeIndicationThis object indicates whether the interface supports
Standard or Arbitrary SONET/SDH.ro Enumeration .1.3.6.1.2.1.10.9988.1.2.4.1.14 |
ospfTeSrlgTableThis table contains the SRLG information of the TE link. SEQUENCE OF OspfTeSrlgEntry .1.3.6.1.2.1.10.9988.1.2.5 |
ospfTeSrlgEntryThis entry relates each TE link with its SRLG information. OspfTeSrlgEntry .1.3.6.1.2.1.10.9988.1.2.5.1 |
ospfTeSrlgThis object indicate the SRLG value assigned to a local or
remote TE linkro Integer32 .1.3.6.1.2.1.10.9988.1.2.5.1.2 |
ospfTeConformance OBJECT IDENTIFIER .1.3.6.1.2.1.10.9988.2 |
ospfTeGroups OBJECT IDENTIFIER .1.3.6.1.2.1.10.9988.2.1 |
ospfTeCompliances OBJECT IDENTIFIER .1.3.6.1.2.1.10.9988.2.2 |