ORiNOCO-MIB
MIB Definition used in the ORiNOCO Wireless Product Line: iso(1).org(3).dod(6).internet(1).private(4).enterprises(1). agere(11898).orinoco(2)
Main OID:
orinoco.1.3.6.1.4.1.11898.2
1031
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
1031 total| Object Name |
|---|
agere OBJECT IDENTIFIER .1.3.6.1.4.1.11898 |
orinocoMIB Definition used in the ORiNOCO Wireless Product Line:
iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).
agere(11898).orinoco(2) MODULE-IDENTITY .1.3.6.1.4.1.11898.2 |
orinocoObjects OBJECT IDENTIFIER .1.3.6.1.4.1.11898.2.1 |
orinocoSys OBJECT IDENTIFIER .1.3.6.1.4.1.11898.2.1.1 |
orinocoSysInvMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.11898.2.1.1.1 |
oriSystemInvMgmtComponentTableThis table contains the inventory management objects for the
system components. SEQUENCE OF OriSystemInvMgmtComponentTableEntry .1.3.6.1.4.1.11898.2.1.1.1.1 |
oriSystemInvMgmtComponentTableEntryThis object represents an entry in the system inventory
management component table. OriSystemInvMgmtComponentTableEntry .1.3.6.1.4.1.11898.2.1.1.1.1.1 |
oriSystemInvMgmtTableComponentIndexThis object represents the table index.ro Integer32 .1.3.6.1.4.1.11898.2.1.1.1.1.1.1 |
oriSystemInvMgmtTableComponentSerialNumberThis object identifies the system component serial number.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.1.1.1.1.2 |
oriSystemInvMgmtTableComponentNameThis object identifies the system component name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.1.1.1.1.3 |
oriSystemInvMgmtTableComponentIdThis object identifies the system component identification.ro Integer32 .1.3.6.1.4.1.11898.2.1.1.1.1.1.4 |
oriSystemInvMgmtTableComponentVariantThis object identifies the system component variant number.ro Integer32 .1.3.6.1.4.1.11898.2.1.1.1.1.1.5 |
oriSystemInvMgmtTableComponentReleaseVersionThis object identifies the system component release version
number.ro Integer32 .1.3.6.1.4.1.11898.2.1.1.1.1.1.6 |
oriSystemInvMgmtTableComponentMajorVersionThis object identifies the system component major version
number.ro Integer32 .1.3.6.1.4.1.11898.2.1.1.1.1.1.7 |
oriSystemInvMgmtTableComponentMinorVersionThis object identifies the system component minor version
number.ro Integer32 .1.3.6.1.4.1.11898.2.1.1.1.1.1.8 |
oriSystemInvMgmtTableComponentIfTableThis table contains the inventory management objects for the
system components. This table has been deprecated.deprecated SEQUENCE OF OriSystemInvMgmtTableComponentIfTableEntry .1.3.6.1.4.1.11898.2.1.1.1.2 |
oriSystemInvMgmtTableComponentIfTableEntryThis object represents an entry in the system component
interface table. This object has been deprecated.deprecated OriSystemInvMgmtTableComponentIfTableEntry .1.3.6.1.4.1.11898.2.1.1.1.2.1 |
oriSystemInvMgmtInterfaceTableIndexThis object identifies the interface table index.
This object has been deprecated.rodeprecated Integer32 .1.3.6.1.4.1.11898.2.1.1.1.2.1.1 |
oriSystemInvMgmtInterfaceIdThis object identifies the system component interface
identification. This object has been deprecated.rodeprecated Integer32 .1.3.6.1.4.1.11898.2.1.1.1.2.1.2 |
oriSystemInvMgmtInterfaceRoleThis object identifies the system component interface role.
This object has been deprecated.rodeprecated Enumeration .1.3.6.1.4.1.11898.2.1.1.1.2.1.3 |
oriSystemInvMgmtInterfaceVariantThis object identifies the system component's interface
variant number. This object has been deprecated.rodeprecated Integer32 .1.3.6.1.4.1.11898.2.1.1.1.2.1.4 |
oriSystemInvMgmtInterfaceBottomNumberThis object identifies the system component's interface
bottom number. This object has been deprecated.rodeprecated Integer32 .1.3.6.1.4.1.11898.2.1.1.1.2.1.5 |
oriSystemInvMgmtInterfaceTopNumberThis object identifies the system component's interface
top number. This object has been deprecated.rodeprecated Integer32 .1.3.6.1.4.1.11898.2.1.1.1.2.1.6 |
oriSystemRebootThis object is used to reboot the device. The value assigned
to this object is the number of seconds until the next reboot.rw Integer32 .1.3.6.1.4.1.11898.2.1.1.4 |
oriSystemContactEmailThis object is used to identify the email address of the
contact person for this managed device.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.1.5 |
oriSystemContactPhoneNumberThis object is used to identify the phone number of the
contact person for this managed device.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.1.6 |
oriSystemFlashUpdateWhen this variable is set, all the objects that are
to be comitted to flash will be written to flash. This
will be done immediately after the value is set, regardless
of the value set.rw Integer32 .1.3.6.1.4.1.11898.2.1.1.7 |
oriSystemFlashBackupIntervalThis object is used for the backup time interval for flash
memory to be udpated.rw Integer32 .1.3.6.1.4.1.11898.2.1.1.8 |
oriSystemEmergencyResetToDefaultThis object is used to reset the device to factory default
values. When this variable is set to 1, all the objects shall be
set to factory default values. The default value for this object
should be 0.rw Integer32 .1.3.6.1.4.1.11898.2.1.1.9 |
oriSystemModeThis object represents the mode the system is configured to
operate in, either bridge or gateway/router mode.rw Enumeration .1.3.6.1.4.1.11898.2.1.1.10 |
oriSystemEventLogTableThis table contains system event log information that can include
events, errors, and informational messages. This is a circular
buffer with a limit 100 entries. SEQUENCE OF OriSystemEventLogTableEntry .1.3.6.1.4.1.11898.2.1.1.11 |
oriSystemEventLogTableEntryThis object represents an entry in the system event log
table. OriSystemEventLogTableEntry .1.3.6.1.4.1.11898.2.1.1.11.1 |
oriSystemEventLogMessageThis object is used to store system event log information.
This is also used as the index to the table.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.1.11.1.1 |
oriSystemEventLogTableResetThis object is used to reset/clear the event log table. When
this object is the set all entries in the event log table are
deleted/cleared.rw Integer32 .1.3.6.1.4.1.11898.2.1.1.12 |
oriSystemEventLogMaskThis object is used to control what events will be logged by
the event log facility. It is a mask, each bit is used to
enable/disable a corresponding set of log messages.
The OR2000 uses the standard syslog priorities and facilities.
The Mask should only be set to mask specific facilities.
The facilities are:
LOG_KERN (0<<3) kernel messages
LOG_USER (1<<3) random user-level messages
LOG_MAIL (2<<3) mail system
LOG_DAEMON (3<<3) system daemons
LOG_AUTH (4<<3) authorization messages
LOG_SYSLOG (5<<3) messages generated internally by syslogd
LOG_LPR (6<<3) line printer subsystem
LOG_NEWS (7<<3) network news subsystem
LOG_UUCP (8<<3) UUCP subsystem
LOG_CRON (9<<3) clock daemon
LOG_AUTHPRIV (10<<3) authorization messages (private)
LOG_FTP (11<<3) ftp daemon
LOG_NTP (12<<3) NTP subsystem
LOG_SECURITY (13<<3) security subsystems (firewalling, etc.)
LOG_CONSOLE (14<<3) /dev/console output
- other codes through 15 reserved for system use
LOG_LOCAL0 (16<<3) reserved for local use
LOG_LOCAL1 (17<<3) reserved for local use
LOG_LOCAL2 (18<<3) reserved for local use
LOG_LOCAL3 (19<<3) reserved for local use
LOG_LOCAL4 (20<<3) reserved for local use
LOG_LOCAL5 (21<<3) reserved for local use
LOG_LOCAL6 (22<<3) reserved for local use
LOG_LOCAL7 (23<<3) reserved for local use
On the BG2000:
Each nibble (4 bits == 1 hex digit == a nibble) represents a
category of log messages. There are 4 levels of messages per
category (1 bit per level per category). The least significant
bit is a higher priority message.
As follows:
security - nibble 1, bits 1-4
errors - nibble 2, bits 5-8
system startup - nibble 3, bits 9-12
warnings - nibble 4, bits 13-16
information - nibble 5, bits 17-20
0x00000 - No events will be logged.
0x000F0 - Only errors will be logged.
0x0F0F0 - Warnings and errors will be logged.
0xFFFFF - All events will be logged.rw Integer32 .1.3.6.1.4.1.11898.2.1.1.13 |
oriSystemAccessUserNameThis object represents the system access user name for the
supported management interfaces (Telnet and HTTP).rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.1.14 |
oriSystemAccessPasswordThis object represents the system access password for the
supported management interfaces (Telnet and HTTP). This object
should be treated as write-only and returned as asterisks.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.1.15 |
oriSystemAccessLoginTimeoutThis object represents the login timeout in seconds. The
default value should be 60 seconds (1 minute).rw Integer32 .1.3.6.1.4.1.11898.2.1.1.16 |
oriSystemAccessIdleTimeoutThis object represents the inactivity or idle timeout in
seconds. The default value should be 900 seconds (15 minutes).rw Integer32 .1.3.6.1.4.1.11898.2.1.1.17 |
oriSystemEventLogNumberOfMessagesThis object represents the number of messages currently stored
in the event log table.ro Integer32 .1.3.6.1.4.1.11898.2.1.1.18 |
orinocoSysFeature OBJECT IDENTIFIER .1.3.6.1.4.1.11898.2.1.1.19 |
oriSystemFeatureTableThis table contains a list of features that the current image
supports and indicates if this features is licensed (enabled) or
not (disabled). Each row represents a supported and/or licensed
feature. Supported indicates if the current image supports the
image while Licensed indicates that a license is available to use
this feature. Based on the license information in this table,
some MIB groups/subgroups/tables will be enabled or disabled. SEQUENCE OF OriSystemFeatureTableEntry .1.3.6.1.4.1.11898.2.1.1.19.1 |
oriSystemFeatureTableEntryThis object represents an entry in the system feature license
table. OriSystemFeatureTableEntry .1.3.6.1.4.1.11898.2.1.1.19.1.1 |
oriSystemFeatureTableCodeThis object identifies the code for the licensed feature and
is used as index for this table.ro Enumeration .1.3.6.1.4.1.11898.2.1.1.19.1.1.1 |
oriSystemFeatureTableSupportedThis object represents the maximum value for the feature as
supported by the current image. For boolean features zero means
not supported, non-zero value means supported.ro Integer32 .1.3.6.1.4.1.11898.2.1.1.19.1.1.2 |
oriSystemFeatureTableLicensedThis object represents the maximum value for the feature as
enforced by the license(s). For boolean features zero means
not licensed, non-zero value means licensed.ro Integer32 .1.3.6.1.4.1.11898.2.1.1.19.1.1.3 |
oriSystemFeatureTableDescriptionThis object represents a textual description for the licensed
feature.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.1.19.1.1.4 |
oriSystemAccessMaxSessionsThis object controls the maximum number of simultaneous telnet,
http, and serial managmenent sessions.ro Integer32 .1.3.6.1.4.1.11898.2.1.1.20 |
orinocoSyslog OBJECT IDENTIFIER .1.3.6.1.4.1.11898.2.1.1.21 |
oriSyslogStatusThis object is used to enable or disable the syslog feature.rw Enumeration .1.3.6.1.4.1.11898.2.1.1.21.1 |
oriSyslogPortThis object represents the UDP destination port number for syslog
services. The standard syslog port is 514.ro Integer32 .1.3.6.1.4.1.11898.2.1.1.21.2 |
oriSyslogPriorityThis object represents the lowest message priority to be logged by
the syslog service.rw Integer32 .1.3.6.1.4.1.11898.2.1.1.21.3 |
oriSyslogHeartbeatStatusThis object is used to enable or disable logging of heartbeat messages
by the syslog service.rw Enumeration .1.3.6.1.4.1.11898.2.1.1.21.4 |
oriSyslogHeartbeatIntervalThis object is used to configure interval (in seconds) for which
heartbeat messages will be logged.rw Integer32 .1.3.6.1.4.1.11898.2.1.1.21.5 |
oriSyslogHostTableThis table is used to configure syslog hosts. SEQUENCE OF OriSyslogHostTableEntry .1.3.6.1.4.1.11898.2.1.1.21.6 |
oriSyslogHostTableEntryThis object represents an entry for the syslog host table. OriSyslogHostTableEntry .1.3.6.1.4.1.11898.2.1.1.21.6.1 |
oriSyslogHostTableIndexThis object represents an index in the syslog host table.ro Integer32 .1.3.6.1.4.1.11898.2.1.1.21.6.1.1 |
oriSyslogHostIPAddressThis object represents the IP address of the host running the
syslog daemon.rw IpAddress .1.3.6.1.4.1.11898.2.1.1.21.6.1.2 |
oriSyslogHostCommentThis object represents an optional comment for the syslog host, for
example the host name or a reference.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.1.21.6.1.3 |
oriSyslogHostTableEntryStatusThis object is used to enable, disable, delete, or create an
entry in the syslog host table.rw Enumeration .1.3.6.1.4.1.11898.2.1.1.21.6.1.4 |
oriSystemCountryCodeThis attribute identifies the country in which the station is
operating. The first two octets of this string is the two character
country code as described in document ISO/IEC 3166-1. Below is the
list of mapping of country codes to country names.
AL - ALBANIA
DZ - ALGERIA
AR - ARGENTINA
AM - ARMENIA
AU - AUSTRALIA
AT - AUSTRIA
AZ - AZERBAIJAN
BH - BAHRAIN
BY - BELARUS
BE - BELGIUM
BZ - BELIZE
BO - BOLIVIA
BR - BRAZIL
BN - BRUNEI DARUSSALAM
BG - BULGARIA
CA - CANADA
CL - CHILE
CN - CHINA
CO - COLOMBIA
CR - COSTA RICA
HR - CROATIA
CY - CYPRUS
CZ - CZECH REPUBLIC
DK - DENMARK
DO - DOMINICAN REPUBLIC
EC - ECUADOR
EG - EGYPT
EE - ESTONIA
FI - FINLAND
FR - FRANCE
GE - GEORGIA
DE - GERMANY
GR - GREECE
GT - GUATEMALA
HK - HONG KONG
HU - HUNGARY
IS - ICELAND
IN - INDIA
ID - INDONESIA
IR - IRAN
IE - IRELAND
I1 - IRELAND - 5.8GHz
IL - ISRAEL
IT - ITALY
JP - JAPAN
J2 - JAPAN2
JO - JORDAN
KZ - KAZAKHSTAN
KP - NORTH KOREA
KR - KOREA REPUBLIC
K2 - KOREA REPUBLIC2
KW - KUWAIT
LV - LATVIA
LB - LEBANON
LI - LIECHTENSTEIN
LT - LITHUANIA
LU - LUXEMBOURG
MO - MACAU
MK - MACEDONIA
MY - MALAYSIA
MX - MEXICO
MC - MONACO
MA - MOROCCO
NL - NETHERLANDS
NZ - NEW ZEALAND
NO - NORWAY
OM - OMAN
PK - PAKISTAN
PA - PANAMA
PE - PERU
PH - PHILIPPINES
PL - POLAND
PT - PORTUGAL
PR - PUERTO RICO
QA - QATAR
RO - ROMANIA
RU - RUSSIA
SA - SAUDI ARABIA
SG - SINGAPORE
SK - SLOVAK REPUBLIC
SI - SLOVENIA
ZA - SOUTH AFRICA
ES - SPAIN
SE - SWEDEN
CH - SWITZERLAND
SY - SYRIA
TW - TAIWAN
TH - THAILAND
TR - TURKEY
UA - UKRAINE
AE - UNITED ARAB EMIRATES
GB - UNITED KINGDOM
G1 - UNITED KINGDOM - 5.8GHz
US - UNITED STATES
UW - UNITED STATES - World
U1 - UNITED STATES - DFS
UY - URUGUAY
VE - VENEZUELA
VN - VIETNAMrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.1.22 |
orinocoTempLog OBJECT IDENTIFIER .1.3.6.1.4.1.11898.2.1.1.23 |
oriUnitTempThis object is used for the internal unit temperature in degrees
celsius. The range of the temperature is -30 to 60 degrees celsius.ro Integer32 (-30..60) .1.3.6.1.4.1.11898.2.1.1.23.1 |
oriTempLoggingIntervalThis object is used for logging interval. The valid values
are 1,5,10,15,20,25,30,35,40,45,50,55,and 60.rw Integer32 .1.3.6.1.4.1.11898.2.1.1.23.2 |
oriTempLogTableThis table contains temperature log information. This is a
circular buffer with a limit 576 entries. SEQUENCE OF OriTempLogTableEntry .1.3.6.1.4.1.11898.2.1.1.23.3 |
oriTempLogTableEntryThis object represents an entry in the temperature log
table. OriTempLogTableEntry .1.3.6.1.4.1.11898.2.1.1.23.3.1 |
oriTempLogMessageThis object is used to store temperature log information.
This is also used as the index to the table.ro DisplayString55 .1.3.6.1.4.1.11898.2.1.1.23.3.1.1 |
oriTempLogTableResetThis object is used for resetting the temperature log
table.rw Integer32 .1.3.6.1.4.1.11898.2.1.1.23.4 |
oriSystemHwTypeThis attribute identifies the type of TMP11 hardware i.e. Indoor
or Outdoor.ro Enumeration .1.3.6.1.4.1.11898.2.1.1.24 |
orinocoIf OBJECT IDENTIFIER .1.3.6.1.4.1.11898.2.1.2 |
orinocoWirelessIf OBJECT IDENTIFIER .1.3.6.1.4.1.11898.2.1.2.1 |
oriWirelessIfPropertiesTableThis table contains information on the properties and
capabilities of the wireless interface(s) present in the device. SEQUENCE OF OriWirelessIfPropertiesEntry .1.3.6.1.4.1.11898.2.1.2.1.1 |
oriWirelessIfPropertiesEntryThis object represents the entry in the wireless interface
properties table. OriWirelessIfPropertiesEntry .1.3.6.1.4.1.11898.2.1.2.1.1.1 |
oriWirelessIfPropertiesIndexThis object represents a unique value for each interface in the
system and is used as index to this table.ro Integer32 .1.3.6.1.4.1.11898.2.1.2.1.1.1.1 |
oriWirelessIfNetworkNameThis object represents the network name (SSID) for this wireless
interface.rw DisplayString .1.3.6.1.4.1.11898.2.1.2.1.1.1.2 |
oriWirelessIfMediumReservationThis object represents the medium reservation value. The range
for this parameter is 0 - 2347. The medium reservation specifies
the number of octects in a frame above which a RTS/CTS handshake is
performed. The default value should be 2347, which disables
RTS/CTS mode.rw Integer32 .1.3.6.1.4.1.11898.2.1.2.1.1.1.3 |
oriWirelessIfInterferenceRobustnessThis object enables or disables the interference robustness
feature. The default value for this object should be disable.rw Enumeration .1.3.6.1.4.1.11898.2.1.2.1.1.1.4 |
oriWirelessIfDTIMPeriodThis object represents the delivery traffic indication map
period. This is the interval between the transmission of multicast
frames on the wireless inteface. It is expressed in the Beacon
messages. The recommended default value for this object is 1.rw Integer32 .1.3.6.1.4.1.11898.2.1.2.1.1.1.5 |
oriWirelessIfChannelThis object represents the radio frequency channel for this
wireless interface. The default value for the channel is based on the
regulatory domain.rw Integer32 .1.3.6.1.4.1.11898.2.1.2.1.1.1.6 |
oriWirelessIfDistancebetweenAPsThis object identifies the distance between access points.
The default value for this parameter should be large.rw Enumeration .1.3.6.1.4.1.11898.2.1.2.1.1.1.7 |
oriWirelessIfMulticastRateThis object is used to configure the multicast rate, but it is
dependent on the type of wireless NIC. The value of this object is
given in 500 Kbps units. This object can be configured to one of the
values defined by the supported multicast rates objects
(oriWirelessIfSupportedMulticastRates).
For 802.11b Wireless NICs:
This object identifies multicast rate of the wireless interface.
This is dependent on the distance between APs. When the distance
between APs object is set to small, minicell, or microcell the
multicast rates can be set to 11 Mbit/s (22 in 500 Kbps units),
5.5 Mbit/s (11), 2 Mbit/s (4), and 1 Mbit/s (2). When this object
is set to medium, the allowed rates are 5.5 Mbit/s (11),
2 Mbit/s (4), 1 Mbit/s (2). When this object is set to large, then
the multicast rates can be set to 2 Mbits/s (4) or 1 Mbits/s (2).
The default value for this object should be 2 Mbits/sec (4).
For 802.11a, g, and a/g Wireless NICs:
This object is used to set the multicast rate for beacons, frames
used for protection mechanism (CTS), and other multicast and broadcast
frames.rw Integer32 .1.3.6.1.4.1.11898.2.1.2.1.1.1.8 |
oriWirelessIfClosedSystemThis object is used as a flag which identifies whether the
device will accept association requests to this interface, for
client stations configured with a network name of 'ANY'. When
this object is disabled, it will accept association requests
from client stations with a network name of 'ANY'. If this
object is set to enable then the interface will only accept
association requests that match the interface's network name
(SSID). The default value for this object should be disable.rw Enumeration .1.3.6.1.4.1.11898.2.1.2.1.1.1.9 |
oriWirelessIfAllowedSupportedDataRatesThis object reflects the transmit rates supported by the
wireless interface. The values of this object are given in
units of 500 kbps.
Examples for supported data rates:
- 802.11b PHY (DSSS - 2.4 GHz)
- 0 = Auto Fallback
- 2 = 1 Mbps
- 4 = 2 Mbps
- 11 = 5.5 Mbps
- 22 = 11 Mbps
- 802.11a PHY (OFDM - 5 GHz)
- 0 = Auto Fallback
- 12 = 6 Mbps
- 18 = 9 Mbps
- 24 = 12 Mbps
- 36 = 18 Mbps
- 48 = 24 Mbps
- 72 = 36 Mbps
- 96 = 48 Mbps
- 108 = 54 Mbps
- 802.11a PHY (OFDM - 5 GHz) with Turbo Mode Enabled
- 0 = Auto Fallback
- 24 = 12 Mbps
- 36 = 18 Mbps
- 48 = 24 Mbps
- 72 = 36 Mbps
- 96 = 48 Mbps
- 144 = 72 Mbps
- 192 = 96 Mbps
- 216 = 108 Mbps
- 802.11g PHY (ERP) in 802.11g only mode
- 0 = Auto Fallback
- 12 = 6 Mbps
- 18 = 9 Mbps
- 24 = 12 Mbps
- 36 = 18 Mbps
- 48 = 24 Mbps
- 72 = 36 Mbps
- 96 = 48 Mbps
- 108 = 54 Mbps
- 802.11g PHY (ERP) in 802.11b/g mode
- 0 = Auto Fallback
- 2 = 1 Mbps
- 4 = 2 Mbps
- 11 = 5.5 Mbps
- 12 = 6 Mbps
- 18 = 9 Mbps
- 22 = 11 Mbps
- 24 = 12 Mbps
- 36 = 18 Mbps
- 48 = 24 Mbps
- 72 = 36 Mbps
- 96 = 48 Mbps
- 108 = 54 Mbpsro OCTET STRING .1.3.6.1.4.1.11898.2.1.2.1.1.1.10 |
oriWirelessIfRegulatoryDomainListThis object specifies a single regulatory domain (not a list) which
is supported by the wireless interface.ro OCTET STRING .1.3.6.1.4.1.11898.2.1.2.1.1.1.11 |
oriWirelessIfAllowedChannelsThis object reflects the radio frequency channels that the
interface supports.ro OCTET STRING .1.3.6.1.4.1.11898.2.1.2.1.1.1.12 |
oriWirelessIfMACAddressThis object represents the MAC address of the wireless interface
present in the device. This object has been deprecated.rodeprecated PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.2.1.1.1.13 |
oriWirelessIfLoadBalancingThis object is used to configure the load balancing feature
for the wireless interface.rw Enumeration .1.3.6.1.4.1.11898.2.1.2.1.1.1.14 |
oriWirelessIfMediumDensityDistributionThis object is used to configure the medium density distribution
feature for the wireless interface.rw Enumeration .1.3.6.1.4.1.11898.2.1.2.1.1.1.15 |
oriWirelessIfTxRateThis object is used to configure the transmit rate for unicast
traffic for the wireless interface. This object is dependent on
the transmit rates supported by the wireless interface (refer
to MIB object - oriWirelessIfAllowedSupportedDataRates and
dot11PHYType). The values of this object are given in units of
500 kbps. A value of zero (0) is interpreted as auto fallback.
Examples for configuring this object:
- 802.11b PHY (DSSS - 2.4 GHz)
- 0 = Auto Fallback
- 2 = 1 Mbps
- 4 = 2 Mbps
- 11 = 5.5 Mbps
- 22 = 11 Mbps
- 802.11a PHY (OFDM - 5 GHz)
- 0 = Auto Fallback
- 12 = 6 Mbps
- 18 = 9 Mbps
- 24 = 12 Mbps
- 36 = 18 Mbps
- 48 = 24 Mbps
- 72 = 36 Mbps
- 96 = 48 Mbps
- 108 = 54 Mbps
- 802.11a PHY (OFDM - 5 GHz) with Turbo Mode Enabled
- 0 = Auto Fallback
- 24 = 12 Mbps
- 36 = 18 Mbps
- 48 = 24 Mbps
- 72 = 36 Mbps
- 96 = 48 Mbps
- 144 = 72 Mbps
- 192 = 96 Mbps
- 216 = 108 Mbps
- 802.11g PHY (ERP) in 802.11g only mode
- 0 = Auto Fallback
- 12 = 6 Mbps
- 18 = 9 Mbps
- 24 = 12 Mbps
- 36 = 18 Mbps
- 48 = 24 Mbps
- 72 = 36 Mbps
- 96 = 48 Mbps
- 108 = 54 Mbps
- 802.11g PHY (ERP) in 802.11b/g mode
- 0 = Auto Fallback
- 2 = 1 Mbps
- 4 = 2 Mbps
- 11 = 5.5 Mbps
- 12 = 6 Mbps
- 18 = 9 Mbps
- 22 = 11 Mbps
- 24 = 12 Mbps
- 36 = 18 Mbps
- 48 = 24 Mbps
- 72 = 36 Mbps
- 96 = 48 Mbps
- 108 = 54 Mbps
The default value for this object should be zero
(0) auto fallback.rw Integer32 .1.3.6.1.4.1.11898.2.1.2.1.1.1.16 |
oriWirelessIfAutoChannelSelectStatusThis object is used to configure the automatic frequency channel
feature for the wireless interface. If this object is enabled, the
frequency channel object can not be set, but the frequency channel
selected will be given in that object. The default value for
this object should be enable.rw Enumeration .1.3.6.1.4.1.11898.2.1.2.1.1.1.17 |
oriWirelessIfBandwidthLimitInThis object represents the input bandwidth limit of the interface
in increments of 64 kbps. The value can be limited by a previous
written value, the negotiation process during registration or by a
license. A written value will only take effect after reboot.rw Gauge32 .1.3.6.1.4.1.11898.2.1.2.1.1.1.18 |
oriWirelessIfBandwidthLimitOutThis object represents the output bandwidth limit of the interface
in increments of 64 kbps. The value can be limited by a previous
written value, the negotiation process during registration or by a
license. A written value will only take effect after reboot.rw Gauge32 .1.3.6.1.4.1.11898.2.1.2.1.1.1.19 |
oriWirelessIfTurboModeStatusThis object is used to enable or disable turbo mode support. Turbo
mode is only supported for 802.11a PHY (OFDM - 5 GHz) and 802.11g
(ERP - 2.4 GHz) wireless NICs and can only be enabled when super mode
is enabled. When Turbo mode is enabled the data rates will be
doubled (refer to oriWirelessIfAllowedSupportedDataRates object
description).rw ObjStatus .1.3.6.1.4.1.11898.2.1.2.1.1.1.20 |
oriWirelessIfSupportedOperationalModesThis object provides information on the wireless operational modes
supported by the NIC. Depending on the wireless NIC in the device
different wireless operational modes can be configured.
The possible supported modes can be:
- 802.11b only
- 802.11g only
- 802.11b/g
- 802.11a only
- 802.11g-wifiro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.2.1.1.1.21 |
oriWirelessIfOperationalModeThis object is used to set the wireless NIC Operational mode.
Depending on the wireless NIC in the device different wireless
operational modes can be configured. The supported modes are:
- 802.11b only
- 802.11g only
- 802.11b/g
- 802.11a only
- 802.11g-wifirw Enumeration .1.3.6.1.4.1.11898.2.1.2.1.1.1.22 |
oriWirelessIfPreambleTypeThis object identifies the wireless interface preamble type
based on the wireless operational mode configured.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.2.1.1.1.23 |
oriWirelessIfProtectionMechanismStatusThis object indicates if protection mechanism is enabled or not
based on the wireless operational mode configured.ro ObjStatus .1.3.6.1.4.1.11898.2.1.2.1.1.1.24 |
oriWirelessIfSupportedMulticastRatesThis object represents the multicast rates supported by the wireless
NIC and the operational mode configured.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.2.1.1.1.25 |
oriWirelessIfCapabilitiesThis object provides information on the wireless capabilities and
features supported by the wireless NIC. Each bit in this object
defines a capability/feature supported by the wireless NIC. If the
bit is set, the capability/feature is supported, otherwise it is not.
The following list provides a definition of the bits in this object:
b0 - Distance Between APs
b1 - Multicast Rate
b2 - Closed System
b3 - Load Balancing
b4 - Medium Density Distribution
b5 - Auto Channel Select
b6 - Turbo Mode
b7 - Interference Robustness
b8 - Wireless Distribution System (WDS)
b9 - Transmit Power Control (TPC)
b10 - Multiple SSIDs
b11 - SpectraLink VoIP
b12 - Remote Link Test
b13 to b255 - Reservedro OCTET STRING .1.3.6.1.4.1.11898.2.1.2.1.1.1.26 |
oriWirelessIfLBTxTimeThresholdMaximum allowed Tx processing time, in mS, where Tx processing time
is measured from time a packet enters AP from the DS to the time it
successfully leaves the AP's Radio.rw Integer32 .1.3.6.1.4.1.11898.2.1.2.1.1.1.27 |
oriWirelessIfLBAdjAPTimeDiffThresholdMaximum allowed difference in mS between adjacent AP's Tx processing
time.rw Integer32 .1.3.6.1.4.1.11898.2.1.2.1.1.1.28 |
oriWirelessIfACSFrequencyBandScanThis object is used to configure the frequency bands that the auto
channel select algorithm will scan through. Each bit in this object
represents a band or subset of channels in the 5 GHz or 2.4 GHz space.
The value of this object is interpreted as a bitfield, where the
value of 1 means enable ACS scan for that band.
The following list provides a definition of the bits in this object:
b0 - U-NII Lower Band = 5.15 - 5.25 GHz (36, 40, 44, 48)
b1 - U-NII Middle Band = 5.25 - 5.35 GHz (52, 56, 60, 64)
b2 - U-NII Upper Band = 5.725 - 5.825 GHz (149, 153, 157, 161)
b3 - H Band = 5.50 - 5.700 GHz (100, 104, 108, 112, 116, 120,
124, 128, 132, 136, 140)
b4 - 5 GHz ISM Band = 5.825 GHz (165)
b5 to b255 - Reservedrw Integer32 .1.3.6.1.4.1.11898.2.1.2.1.1.1.29 |
oriWirelessIfSecurityPerSSIDStatusThis object is used to enable or disable the security per SSID
feature. Once this object is enabled, the administrator should use
the Wireless Interface SSID table (oriWirelessIfSSIDTable to
configure the security related management objects.rw ObjStatus .1.3.6.1.4.1.11898.2.1.2.1.1.1.30 |
oriWirelessIfDFSStatusThis object is used to enable/disable dynamic frequency selection.
This functionality is dependent on the regulatory domain of the
wireless NIC.rw ObjStatus .1.3.6.1.4.1.11898.2.1.2.1.1.1.31 |
oriWirelessIfAntennaThis object is used to configure the antenna. The administrator can
select controllable, external, internal, or disable the antenna.rwdeprecated Enumeration .1.3.6.1.4.1.11898.2.1.2.1.1.1.32 |
oriWirelessIfTPCModeThis object is used to configure the transmit power control of
the wireless NIC. The transmit power is defined in dBm and can be
configured in increments 3 dBms.rw Integer32 (0 | 3 | 6 | 9 | 12 | 15 | 18) .1.3.6.1.4.1.11898.2.1.2.1.1.1.33 |
oriWirelessIfSuperModeStatusThis object is used to enable/disable super mode support. Super Mode
increases the overall throughput of the wireless interface by
implementing fast frame, bursting, and compression. When super mode
is enabled, the channels that can be used in the 2.4 GHz and 5.0 GHz
spectrum are limited (refer to oriWirelessIfAllowedChannels for the
allowed channels). The super mode feature is only supported for
802.11a (OFDM - 5 GHz) and 802.11g (ERP - 2.4 GHz) wireless NICs.rw ObjStatus .1.3.6.1.4.1.11898.2.1.2.1.1.1.34 |
oriWirelessIfWSSStatusThis object is used for the Wireless System Shutdown feature. This
feature allows an administrator to shut down wireless services to
clients. When this object is set to down wireless client services
will be shutdown/disabled, but WDS links will still remain up.rw Enumeration .1.3.6.1.4.1.11898.2.1.2.1.1.1.35 |
oriWirelessIfSupportedAuthenticationModesThis object is used to provide information on the authentication modes
supported by the wireless interface. The possible authentication modes
are:
- none: no authentication mode
- dot1x: 802.1x authentication mode
- psk: psk authentication modero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.2.1.1.1.36 |
oriWirelessIfSupportedCipherModesThis object is used to provide information on the cipher modes/types
supported by the wireless interface. The possible cipher modes/types
are:
- none: no cipher/encryption mode
- wep: wep encryption mode
- tkip: tkip encryption mode
- aes: aes encryption modero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.2.1.1.1.37 |
oriWirelessIfQoSStatusThis object is used to enable/disable Quality of Service (QoS) on the
wireless interface.rw ObjStatus .1.3.6.1.4.1.11898.2.1.2.1.1.1.38 |
oriWirelessIfQoSMaxMediumThresholdThis object is used to specify the QoS admission control maximum
medium threshold. The maximum medium threshold will apply to all
access categories and is given in a percentage of the medium.rw Integer32 .1.3.6.1.4.1.11898.2.1.2.1.1.1.39 |
oriWirelessIfAntennaGainThis object represents Antenna Gain value (including cable loss) that will be
added to the radar detetection parameters.rw Integer32 .1.3.6.1.4.1.11898.2.1.2.1.1.1.40 |
oriWirelessIfSecurityTableThis table contains information on the security management objects
for the wireless interface(s) present in the device. SEQUENCE OF OriWirelessIfSecurityEntry .1.3.6.1.4.1.11898.2.1.2.1.2 |
oriWirelessIfSecurityEntryThis object represents an entry in the wireless interface
security table. OriWirelessIfSecurityEntry .1.3.6.1.4.1.11898.2.1.2.1.2.1 |
oriWirelessIfSecurityIndexThis object represents a unique value for each interface in the
system and is used as index to this table.ro Integer32 .1.3.6.1.4.1.11898.2.1.2.1.2.1.1 |
oriWirelessIfEncryptionOptionsThis object sets the wireless interface's security
capabilities (such as WEP and other standard and proprietary
security features).
AES encryption is only for 802.11a and supports only OCB mode
integrity check.rw Enumeration .1.3.6.1.4.1.11898.2.1.2.1.2.1.2 |
oriWirelessIfEncryptionStatusThis object is used to enable or disable WEP encryption for the
wireless interface.rwdeprecated Enumeration .1.3.6.1.4.1.11898.2.1.2.1.2.1.3 |
oriWirelessIfEncryptionKey1This object represents Encryption Key 1. This object should be
treated as write-only and returned as asterisks.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.2.1.2.1.4 |
oriWirelessIfEncryptionKey2This object represents Encryption Key 2. This object should be
treated as write-only and returned as asterisks.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.2.1.2.1.5 |
oriWirelessIfEncryptionKey3This object represents Encryption Key 3. This object should be
treated as write-only and returned as asterisks.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.2.1.2.1.6 |
oriWirelessIfEncryptionKey4This object represents Encryption Key 4. This object should be
treated as write-only and returned as asterisks.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.2.1.2.1.7 |
oriWirelessIfEncryptionTxKeyThis object indicates which encryption key is used to encrypt
data that is sent via the wireless interfaces. When this object is
configured to 0, then Encryption Key 1 will be used. When this object
is configured to 1, then Encryption Key 2 will be used. When
this object is configured to 2, then Encryption Key 3 will be used.
When this object is configured to 3, then Encryption Key 4 will be
used. The default value for this object should be key 0.rw Integer32 .1.3.6.1.4.1.11898.2.1.2.1.2.1.8 |
oriWirelessIfDenyNonEncryptedDataThis parameter indicates if this interface will accept or deny
non-encrypted data. The default value for this parameters is
disabled.rw Enumeration .1.3.6.1.4.1.11898.2.1.2.1.2.1.9 |
oriWirelessIfProfileCodeThe object represents the profile code of the wirelesss interface.
This information is comprised of a vendor indication and a
capability indication (example: bronze or gold card).ro Integer32 .1.3.6.1.4.1.11898.2.1.2.1.2.1.10 |
oriWirelessIfSSIDTableThis table is used to configure the SSIDs for the wireless interface
in the device. SEQUENCE OF OriWirelessIfSSIDTableEntry .1.3.6.1.4.1.11898.2.1.2.1.3 |
oriWirelessIfSSIDTableEntryThis object represents an entry in the respective table.
In this case each table entry represents a VLAN ID. OriWirelessIfSSIDTableEntry .1.3.6.1.4.1.11898.2.1.2.1.3.1 |
oriWirelessIfSSIDTableIndexThis object represents the index to the SSID Table.ro Integer32 .1.3.6.1.4.1.11898.2.1.2.1.3.1.1 |
oriWirelessIfSSIDTableSSIDThis object represents the wireless card SSID string (wireless network
name).rw DisplayString .1.3.6.1.4.1.11898.2.1.2.1.3.1.2 |
oriWirelessIfSSIDTableVLANIDThis object represents the VLAN Identifier (ID).rw VlanId .1.3.6.1.4.1.11898.2.1.2.1.3.1.3 |
oriWirelessIfSSIDTableStatusThis object represents the wireless SSID table row/entry status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.2.1.3.1.4 |
oriWirelessIfSSIDTableSecurityModeThis object is used to configure the security mode for this table
entry (SSID). This object is deprecated.rwdeprecated Enumeration .1.3.6.1.4.1.11898.2.1.2.1.3.1.5 |
oriWirelessIfSSIDTableBroadcastSSIDThis object is used to enable/disable a broadcast SSID in the SSID
table. A single entry in the SSID table can be enabled to broadcast
SSID in beacon messages.rw ObjStatus .1.3.6.1.4.1.11898.2.1.2.1.3.1.6 |
oriWirelessIfSSIDTableClosedSystemThis object is used to enable/disable the closed system feature
for this table entry (SSID).rw ObjStatus .1.3.6.1.4.1.11898.2.1.2.1.3.1.7 |
oriWirelessIfSSIDTableSupportedSecurityModesThis object is used to provide information on the supported
security modes by the wireless interface(s). The possible security
modes can be:
- None: no security mode enabled.
- dot1x: 802.1x authentication enabled.
- mixed: mixed WEP and 802.1x.
- wpa: WiFi Protected Access enabled.
- wpa-psk: WiFi Protected Access with Preshared Keys enabled.
- wep: WEP Encryption enabled (no authentication)
This object is deprecated.rodeprecated DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.2.1.3.1.8 |
oriWirelessIfSSIDTableEncryptionKey0This object represents Encryption Key 0. This object should be
treated as write-only and returned as asterisks. This object is
deprecated.rwdeprecated WEPKeyType .1.3.6.1.4.1.11898.2.1.2.1.3.1.9 |
oriWirelessIfSSIDTableEncryptionKey1This object represents Encryption Key 1. This object should be
treated as write-only and returned as asterisks. This object is
deprecated.rwdeprecated WEPKeyType .1.3.6.1.4.1.11898.2.1.2.1.3.1.10 |
oriWirelessIfSSIDTableEncryptionKey2This object represents Encryption Key 2. This object should be
treated as write-only and returned as asterisks. This object is
deprecated.rwdeprecated WEPKeyType .1.3.6.1.4.1.11898.2.1.2.1.3.1.11 |
oriWirelessIfSSIDTableEncryptionKey3This object represents Encryption Key 3. This object should be
treated as write-only and returned as asterisks. This object is
deprecated.rwdeprecated WEPKeyType .1.3.6.1.4.1.11898.2.1.2.1.3.1.12 |
oriWirelessIfSSIDTableEncryptionTxKeyThis object indicates which encryption key is used to encrypt
data that is sent via the wireless interfaces. The default value
for this object should be key 0. This object is deprecated.rwdeprecated Integer32 .1.3.6.1.4.1.11898.2.1.2.1.3.1.13 |
oriWirelessIfSSIDTableEncryptionKeyLengthThis object represents the encryption key length, the supported
key lengths are 64 bits (40 + 24 for IV), 128 bits
(104 + 24 for IV), and 152 bits (128 + 24 for IV). This object is
deprecated.rwdeprecated Enumeration .1.3.6.1.4.1.11898.2.1.2.1.3.1.14 |
oriWirelessIfSSIDTableRekeyingIntervalThis object represents the encryption rekeying interval. if this
object is configured to zero (0) rekeying is disabled. The units
of this object is seconds.rw Integer32 (0 | 300..65535) .1.3.6.1.4.1.11898.2.1.2.1.3.1.15 |
oriWirelessIfSSIDTablePSKValueThe Pre-Shared Key (PSK) for when RSN in PSK mode is the selected
authentication suite. In that case, the PMK will obtain its value
from this object.
This object is logically write-only. Reading this variable shall
return unsuccessful status or null or zero. This object is deprecated.rwdeprecated OCTET STRING ( SIZE (32) ) .1.3.6.1.4.1.11898.2.1.2.1.3.1.16 |
oriWirelessIfSSIDTablePSKPassPhraseThe PSK, for when RSN in PSK mode is the selected authentication
suite, is configured by oriWirelessIfSSIDTablePSKValue. An alternative
manner of setting the PSK uses the password-to-key algorithm defined
in the standard. This variable provides a means to enter a pass phrase.
When this object is written, the RSN entity shall use the
password-to-key algorithm specified in the standard to derive a
pre-shared and populate oriWirelessIfSSIDTablePSKValue with this key.
This object is logically write-only. Reading this variable shall
return unsuccessful status or null or zero. This object is deprecated.rwdeprecated DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.2.1.3.1.17 |
oriWirelessIfSSIDTableDenyNonEncryptedDataThis object is used to enable/disable deny non encrypted data. This
function is only supported when the security mode is configured to
WEP or Mixed Mode; it is not supported for 802.1x, WPA, and WPA-PSK
security modes. This object is deprecated.rwdeprecated ObjStatus .1.3.6.1.4.1.11898.2.1.2.1.3.1.18 |
oriWirelessIfSSIDTableSSIDAuthorizationStatusThis object is used to enable or disable SSID Authorization.rw ObjStatus .1.3.6.1.4.1.11898.2.1.2.1.3.1.19 |
oriWirelessIfSSIDTableMACAccessControlThis object is used to enable or disable MAC Access Control
feature/filter for this SSID.rw ObjStatus .1.3.6.1.4.1.11898.2.1.2.1.3.1.20 |
oriWirelessIfSSIDTableRADIUSMACAccessControlThis object is used to enables RADIUS Access Control based on
wireless stations MAC Address.rw ObjStatus .1.3.6.1.4.1.11898.2.1.2.1.3.1.21 |
oriWirelessIfSSIDTableSecurityProfileThis object is used to configure the security profile that will be
used for this SSID. The security profile is defined in the Security
Profile Table in the orinocoSecurity group.rw Integer32 .1.3.6.1.4.1.11898.2.1.2.1.3.1.22 |
oriWirelessIfSSIDTableRADIUSDot1xProfileThis object is used to configure the RADIUS server profile that will be
used for 802.1x authentication for this SSID. The RADIUS profile is
defined in the RADIUS Server Table in the orinocoRADIUSSvrProfile
group.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.2.1.3.1.23 |
oriWirelessIfSSIDTableRADIUSMACAuthProfileThis object is used to configure the RADIUS server profile that will be
used for MAC based RADIUS authentication for this SSID. The RADIUS
profile is defined in the RADIUS Server Table in the
orinocoRADIUSSvrProfile group.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.2.1.3.1.24 |
oriWirelessIfSSIDTableRADIUSAccountingStatusThis object is used to enable or disable the RADIUS Accounting
service per SSID.rw ObjStatus .1.3.6.1.4.1.11898.2.1.2.1.3.1.25 |
oriWirelessIfSSIDTableRADIUSAccountingProfileThis object is used to configure the RADIUS server profile that will
be used for Accounting for this SSID. The RADIUS profile is defined
in the RADIUS Server Table in the orinocoRADIUSSvrProfile group.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.2.1.3.1.26 |
oriWirelessIfSSIDTableQoSPolicyThis object is used to configure the QoS policy that will be
used for this SSID. The QoS profile is defined in the QoS Policy
Table in the orinocoQoS group.rw Integer32 .1.3.6.1.4.1.11898.2.1.2.1.3.1.27 |
oriWirelessIfTxPowerControlThis object is used to enable or disable Transmit (Tx) Power Control
feature.rw ObjStatus .1.3.6.1.4.1.11898.2.1.2.1.4 |
orinocoEthernetIf OBJECT IDENTIFIER .1.3.6.1.4.1.11898.2.1.2.2 |
oriEthernetIfConfigTableThis table is used to configure the ethernet interface(s) for the
device. SEQUENCE OF OriEthernetIfConfigTableEntry .1.3.6.1.4.1.11898.2.1.2.2.1 |
oriEthernetIfConfigTableEntryThis object represents an entry in the ethernet interface
configuration table. OriEthernetIfConfigTableEntry .1.3.6.1.4.1.11898.2.1.2.2.1.1 |
oriEthernetIfConfigTableIndexThis object represents the index of the ethernet configuraiton
table.ro Integer32 .1.3.6.1.4.1.11898.2.1.2.2.1.1.1 |
oriEthernetIfConfigSettingsThis object is used to configure the Ethernet interface's speed.
Some devices support all the configuration options
listed above, while others support only a subset of the
configuration options.rw Enumeration .1.3.6.1.4.1.11898.2.1.2.2.1.1.2 |
oriEthernetIfConfigBandwidthLimitInThis object represents the input bandwidth limit of the interface
in increments of 64 kbps. The value can be limited by a previous
written value, the negotiation process during registration, or by
a license. A written value will only take effect after reboot.rw Gauge32 .1.3.6.1.4.1.11898.2.1.2.2.1.1.3 |
oriEthernetIfConfigBandwidthLimitOutThis object represents the output bandwidth limit of the interface
in increments of 64 kbps. The value can be limited by a previous
written value, the negotiation process during registration, or by
a license. A written value will only take effect after reboot.rw Gauge32 .1.3.6.1.4.1.11898.2.1.2.2.1.1.4 |
oriIfWANInterfaceMACAddressThis object represents the MAC address of the WAN interface.rw PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.2.4 |
orinocoWORPIf OBJECT IDENTIFIER .1.3.6.1.4.1.11898.2.1.2.5 |
oriWORPIfConfigTableThis table is used to configure the mode, time-outs, and protocol
objects for wireless interface(s) that are configured to run WORP. SEQUENCE OF OriWORPIfConfigTableEntry .1.3.6.1.4.1.11898.2.1.2.5.1 |
oriWORPIfConfigTableEntryThis object represents an entry in the WORP Interface
Configuration Table. OriWORPIfConfigTableEntry .1.3.6.1.4.1.11898.2.1.2.5.1.1 |
oriWORPIfConfigTableModeThe running mode of this interface:
- If set to disabled, the interface is disabled.
- If set to AP, the interface will run in standard IEEE802.11
mode.
- If set to Base, the interface will be a WORP master
interface and be able to connect to multiple WORP satellites.
- If set to Satellite, the interface will be a WORP slave
interface.rw Enumeration .1.3.6.1.4.1.11898.2.1.2.5.1.1.1 |
oriWORPIfConfigTableBaseStationNameThe name of the base station. For a base this name will default
to the MIB-II sysName; for a satellite to empty (if not registered
to any base) or the name it is registered to. When a name is set
for a satellite, the satellite will only register on a base
with this name.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.2.5.1.1.2 |
oriWORPIfConfigTableMaxSatellitesThe maximum of remotes allowed on this interface. Please note
that this value will also be limited by the image and the
license.rw Integer32 .1.3.6.1.4.1.11898.2.1.2.5.1.1.3 |
oriWORPIfConfigTableRegistrationTimeoutThis object represents the Timeout of regristration and
authentication, configurable between 1sec and 10sec.rw Integer32 .1.3.6.1.4.1.11898.2.1.2.5.1.1.4 |
oriWORPIfConfigTableRetriesThe number of times a data message will be retransmitted,
configurable between 0 and 10. The value 0 allows unreliable
operation for streaming applications.rw Integer32 .1.3.6.1.4.1.11898.2.1.2.5.1.1.5 |
oriWORPIfConfigTableNetworkSecretThe NetworkSecret is a string that must be the same for all
stations in a certain network. If a station has another secret
configured as the base, the base will not allow the station to
register. This object should be treated as write-only and
returned as asterisks.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.2.5.1.1.6 |
oriWORPIfConfigTableNoSleepModeThis object is used to enable or disable sleep mode. If this object
is enabled, a subscriber unit will not go into sleep mode when
they have no data to send.rw ObjStatus .1.3.6.1.4.1.11898.2.1.2.5.1.1.7 |
oriWORPIfStatTableThis table is used to monitor the statistics of interfaces that
run WORP. SEQUENCE OF OriWORPIfStatTableEntry .1.3.6.1.4.1.11898.2.1.2.5.2 |
oriWORPIfStatTableEntryThis object represents an entry in the WORP Interface
Statistics Table. OriWORPIfStatTableEntry .1.3.6.1.4.1.11898.2.1.2.5.2.1 |
oriWORPIfStatTableRemotePartnersThe number of remote partners. For a satellite, this parameter
will always be zero or one.ro Counter32 .1.3.6.1.4.1.11898.2.1.2.5.2.1.1 |
oriWORPIfStatTableAverageLocalSignalThe current signal level calculated over all inbound packets.
This variable indicates the running average of the local signal
level using the algorithm (3/4*oldvalue + 1/4*newvalue).ro Integer32 (-102..-10) .1.3.6.1.4.1.11898.2.1.2.5.2.1.2 |
oriWORPIfStatTableAverageLocalNoiseThe current noise level calculated over all inbound packets.
This variable indicates the running average of the local noise
level using the algorithm (3/4*oldvalue + 1/4*newvalue).ro Integer32 (-102..-10) .1.3.6.1.4.1.11898.2.1.2.5.2.1.3 |
oriWORPIfStatTableAverageRemoteSignalThe current remote signal level calculated over the inbound
packets send by this station. This variable indicates the
running average over all registered stations of the remote
signal level using the algorithm (3/4*oldvalue + 1/4*newvalue).ro Integer32 (-102..-10) .1.3.6.1.4.1.11898.2.1.2.5.2.1.4 |
oriWORPIfStatTableAverageRemoteNoiseThe current average remote noise level calculated over the
inbound packets send by this station. This variable indicates
the running average over all registered stations of the remote
noise level using the algorithm (3/4*oldvalue + 1/4*newvalue).ro Integer32 (-102..-10) .1.3.6.1.4.1.11898.2.1.2.5.2.1.5 |
oriWORPIfStatTableBaseStationAnnouncesThe number of Base Station Announces Broadcasts (BSAB) sent
(base) or received (satellite) on this interface.ro Counter32 .1.3.6.1.4.1.11898.2.1.2.5.2.1.6 |
oriWORPIfStatTableRegistrationRequestsThe number of Registration Requests (RREQ) sent (satellite) or
received (base) on this interface.ro Counter32 .1.3.6.1.4.1.11898.2.1.2.5.2.1.7 |
oriWORPIfStatTableRegistrationRejectsThe number of Registration Rejects (RREJ) sent (base) or
received (satellite) on this interface.ro Counter32 .1.3.6.1.4.1.11898.2.1.2.5.2.1.8 |
oriWORPIfStatTableAuthenticationRequestsThe number of Authentication Requests (AREQ) sent (satellite) or
received (base) on this interface.ro Counter32 .1.3.6.1.4.1.11898.2.1.2.5.2.1.9 |
oriWORPIfStatTableAuthenticationConfirmsThe number of Authentication Confirms (ACFM) sent (base) or
received (satellite) on this interface.ro Counter32 .1.3.6.1.4.1.11898.2.1.2.5.2.1.10 |
oriWORPIfStatTableRegistrationAttemptsThe number of times a Registration Attempt has been initiated.ro Counter32 .1.3.6.1.4.1.11898.2.1.2.5.2.1.11 |
oriWORPIfStatTableRegistrationIncompletesThe number of registration attempts that is not completed yet.
For a satellite this parameters will always be zero or one.ro Counter32 .1.3.6.1.4.1.11898.2.1.2.5.2.1.12 |
oriWORPIfStatTableRegistrationTimeoutsThe number of times the registration procedure timed out.ro Counter32 .1.3.6.1.4.1.11898.2.1.2.5.2.1.13 |
oriWORPIfStatTableRegistrationLastReasonThe reason for why the last registration was aborted or failed.ro Enumeration .1.3.6.1.4.1.11898.2.1.2.5.2.1.14 |
oriWORPIfStatTablePollDataThe number of polls with data sent (base) or received
(satellite).ro Counter32 .1.3.6.1.4.1.11898.2.1.2.5.2.1.15 |
oriWORPIfStatTablePollNoDataThe number of polls with no data sent (base) or received
(satellite).ro Counter32 .1.3.6.1.4.1.11898.2.1.2.5.2.1.16 |
oriWORPIfStatTableReplyDataThe number of poll replies with data sent (satellite) or
received (base). This counter does not include replies with the
MoreData flag set (see ReplyMoreData).ro Counter32 .1.3.6.1.4.1.11898.2.1.2.5.2.1.17 |
oriWORPIfStatTableReplyMoreDataThe number of poll replies with data sent (satellite) or
received (base) with the MoreData flag set (see also ReplyData).ro Counter32 .1.3.6.1.4.1.11898.2.1.2.5.2.1.18 |
oriWORPIfStatTableReplyNoDataThe number of poll replies with no data sent (satellite) or
received (base).ro Counter32 .1.3.6.1.4.1.11898.2.1.2.5.2.1.19 |
oriWORPIfStatTableRequestForServiceThe number of requests for service sent (satellite) or
received (base).ro Counter32 .1.3.6.1.4.1.11898.2.1.2.5.2.1.20 |
oriWORPIfStatTableSendSuccessThe number of data packets sent that were acknowledged and did
not need a retransmit.ro Counter32 .1.3.6.1.4.1.11898.2.1.2.5.2.1.21 |
oriWORPIfStatTableSendRetriesThe number of data packets sent that needed retransmition but
were finally received succesfully by the remote partner.ro Counter32 .1.3.6.1.4.1.11898.2.1.2.5.2.1.22 |
oriWORPIfStatTableSendFailuresThe number of data packets sent that were (finally) not received
succesfully by the remote partner.ro Counter32 .1.3.6.1.4.1.11898.2.1.2.5.2.1.23 |
oriWORPIfStatTableReceiveSuccessThe number of data packets received that were acknowledged and
did not need a retransmit of the remote partner.ro Counter32 .1.3.6.1.4.1.11898.2.1.2.5.2.1.24 |
oriWORPIfStatTableReceiveRetriesThe number of data packets received that needed retransmition by
the remote partner but were finally received succesfully.ro Counter32 .1.3.6.1.4.1.11898.2.1.2.5.2.1.25 |
oriWORPIfStatTableReceiveFailuresThe number of data packets that were (finally) not received
succesfully.ro Counter32 .1.3.6.1.4.1.11898.2.1.2.5.2.1.26 |
oriWORPIfStatTablePollNoRepliesThe number of times a poll was sent but no reply was received.
This object only applies to the base.ro Counter32 .1.3.6.1.4.1.11898.2.1.2.5.2.1.27 |
orinocoWORPIfSat OBJECT IDENTIFIER .1.3.6.1.4.1.11898.2.1.2.5.3 |
orinocoWORPIfSatConfig OBJECT IDENTIFIER .1.3.6.1.4.1.11898.2.1.2.5.3.1 |
oriWORPIfSatConfigStatusThis object is used to enable or disable the per-satellite config
from the base device.rw Enumeration .1.3.6.1.4.1.11898.2.1.2.5.3.1.1 |
oriWORPIfSatConfigTableThis table contains wireless stations statistics. SEQUENCE OF OriWORPIfSatConfigTableEntry .1.3.6.1.4.1.11898.2.1.2.5.3.1.2 |
oriWORPIfSatConfigTableEntryThis object represents an entry in the WORP Interface
Satellite Statistics Table. OriWORPIfSatConfigTableEntry .1.3.6.1.4.1.11898.2.1.2.5.3.1.2.1 |
oriWORPIfSatConfigTableIndexThis object is used to index the protocol filter table.ro Integer32 .1.3.6.1.4.1.11898.2.1.2.5.3.1.2.1.1 |
oriWORPIfSatConfigTableEntryStatusThis object is used to enable, disable, delete, create the
Ethernet protocols in this table.rw Enumeration .1.3.6.1.4.1.11898.2.1.2.5.3.1.2.1.2 |
oriWORPIfSatConfigTableMacAddressThis object represents the MAC address of the satellite
for which the statistics are gathered.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.2.5.3.1.2.1.3 |
oriWORPIfSatConfigTableMinimumBandwidthLimitDownlinkThis object represents the minimum input bandwidth limit of the
interface in increments of 64 kbps. The value can be limited by a
previous written value, the negotiation process during registration or
by a license. A written value will only take effect after reboot.rw Gauge32 .1.3.6.1.4.1.11898.2.1.2.5.3.1.2.1.4 |
oriWORPIfSatConfigTableMaximumBandwidthLimitDownlinkThis object represents the maximum input bandwidth limit of the
interface in increments of 64 kbps. The value can be limited by a
previous written value, the negotiation process during registration
or by a license. A written value will only take effect after reboot.rw Gauge32 .1.3.6.1.4.1.11898.2.1.2.5.3.1.2.1.5 |
oriWORPIfSatConfigTableMinimumBandwidthLimitUplinkThis object represents the minimum output bandwidth limit of the
interface in increments of 64 kbps. The value can be limited by a
previous written value, the negotiation process during registration or
by a license. A written value will only take effect after reboot.rw Gauge32 .1.3.6.1.4.1.11898.2.1.2.5.3.1.2.1.6 |
oriWORPIfSatConfigTableMaximumBandwidthLimitUplinkThis object represents the maximum output bandwidth limit of the
interface in increments of 64 kbps. The value can be limited by a
previous written value, the negotiation process during registration or
by a license. A written value will only take effect after reboot.rw Gauge32 .1.3.6.1.4.1.11898.2.1.2.5.3.1.2.1.7 |
oriWORPIfSatConfigTableCommentThis object is used for an optional comment associated to the
per Satellite config Table entry.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.2.5.3.1.2.1.8 |
orinocoWORPIfSatStat OBJECT IDENTIFIER .1.3.6.1.4.1.11898.2.1.2.5.3.2 |
oriWORPIfSatStatTableThis table contains wireless stations statistics. SEQUENCE OF OriWORPIfSatStatTableEntry .1.3.6.1.4.1.11898.2.1.2.5.3.2.1 |
oriWORPIfSatStatTableEntryThis object represents an entry in the WORP Interface
Satellite Statistics Table. OriWORPIfSatStatTableEntry .1.3.6.1.4.1.11898.2.1.2.5.3.2.1.1 |
oriWORPIfSatStatTableIndexThis object represents the table index for SatStat Table.ro Integer32 .1.3.6.1.4.1.11898.2.1.2.5.3.2.1.1.1 |
oriWORPIfSatStatTableMacAddressThis object represents the MAC address of the satellite
for which the statistics are gathered.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.2.5.3.2.1.1.2 |
oriWORPIfSatStatTableAverageLocalSignalThe current signal level calculated over all inbound packets.
This variable indicates the running average of the local signal
level using the algorithm (3/4*oldvalue + 1/4*newvalue).ro Integer32 (-102..-10) .1.3.6.1.4.1.11898.2.1.2.5.3.2.1.1.3 |
oriWORPIfSatStatTableAverageLocalNoiseThe current noise level calculated over all inbound packets.
This variable indicates the running average of the local noise
level using the algorithm (3/4*oldvalue + 1/4*newvalue).ro Integer32 (-102..-10) .1.3.6.1.4.1.11898.2.1.2.5.3.2.1.1.4 |
oriWORPIfSatStatTableAverageRemoteSignalThe current remote signal level calculated over the inbound
packets send by this station. This variable indicates the
running average over all registered stations of the remote
signal level using the algorithm (3/4*oldvalue + 1/4*newvalue).ro Integer32 (-102..-10) .1.3.6.1.4.1.11898.2.1.2.5.3.2.1.1.5 |
oriWORPIfSatStatTableAverageRemoteNoiseThe current average remote noise level calculated over the
inbound packets send by this station. This variable indicates
the running average over all registered stations of the remote
noise level using the algorithm (3/4*oldvalue + 1/4*newvalue).ro Integer32 (-102..-10) .1.3.6.1.4.1.11898.2.1.2.5.3.2.1.1.6 |
oriWORPIfSatStatTablePollDataThe number of polls with data sent (base) or received
(satellite).ro Counter32 .1.3.6.1.4.1.11898.2.1.2.5.3.2.1.1.7 |
oriWORPIfSatStatTablePollNoDataThe number of polls with no data sent (base) or received
(satellite).ro Counter32 .1.3.6.1.4.1.11898.2.1.2.5.3.2.1.1.8 |
oriWORPIfSatStatTableReplyDataThe number of poll replies with data sent (satellite) or
received (base). This counter does not include replies with the
MoreData flag set (see ReplyMoreData).ro Counter32 .1.3.6.1.4.1.11898.2.1.2.5.3.2.1.1.9 |
oriWORPIfSatStatTableReplyNoDataThe number of poll replies with no data sent (satellite) or
received (base).ro Counter32 .1.3.6.1.4.1.11898.2.1.2.5.3.2.1.1.10 |
oriWORPIfSatStatTableRequestForServiceThe number of requests for service sent (satellite) or
received (base).ro Counter32 .1.3.6.1.4.1.11898.2.1.2.5.3.2.1.1.11 |
oriWORPIfSatStatTableSendSuccessThe number of data packets sent that were acknowledged and did
not need a retransmit.ro Counter32 .1.3.6.1.4.1.11898.2.1.2.5.3.2.1.1.12 |
oriWORPIfSatStatTableSendRetriesThe number of data packets sent that needed retransmition but
were finally received succesfully by the remote partner.ro Counter32 .1.3.6.1.4.1.11898.2.1.2.5.3.2.1.1.13 |
oriWORPIfSatStatTableSendFailuresThe number of data packets sent that were (finally) not received
succesfully by the remote partner.ro Counter32 .1.3.6.1.4.1.11898.2.1.2.5.3.2.1.1.14 |
oriWORPIfSatStatTableReceiveSuccessThe number of data packets received that were acknowledged and
did not need a retransmit of the remote partner.ro Counter32 .1.3.6.1.4.1.11898.2.1.2.5.3.2.1.1.15 |
oriWORPIfSatStatTableReceiveRetriesThe number of data packets received that needed retransmition by
the remote partner but were finally received succesfully.ro Counter32 .1.3.6.1.4.1.11898.2.1.2.5.3.2.1.1.16 |
oriWORPIfSatStatTableReceiveFailuresThe number of data packets that were (finally) not received
succesfully.ro Counter32 .1.3.6.1.4.1.11898.2.1.2.5.3.2.1.1.17 |
oriWORPIfSatStatTablePollNoRepliesThe number of times a poll was sent but no reply was received.
This object only applies to the base.ro Counter32 .1.3.6.1.4.1.11898.2.1.2.5.3.2.1.1.18 |
oriWORPIfSatStatTableLocalTxRateThis object represents the Transmit Data Rate of the BSU.ro Integer32 .1.3.6.1.4.1.11898.2.1.2.5.3.2.1.1.19 |
oriWORPIfSatStatTableRemoteTxRateThis object represents the Transmit Data Rate of the SU
which is registered to this SU.ro Integer32 .1.3.6.1.4.1.11898.2.1.2.5.3.2.1.1.20 |
orinocoWORPIfSiteSurvey OBJECT IDENTIFIER .1.3.6.1.4.1.11898.2.1.2.5.4 |
oriWORPIfSiteSurveyOperationThis object is used to enable or disable the site survey mode. The site
survey is going to show user the wireless signal level, noise level and
SNR value.rw Enumeration .1.3.6.1.4.1.11898.2.1.2.5.4.1 |
oriWORPIfSiteSurveyTableThis table contains the information for the stations currently
associated with the access point. SEQUENCE OF OriWORPIfSiteSurveySignalQualityTableEntry .1.3.6.1.4.1.11898.2.1.2.5.4.2 |
oriWORPIfSiteSurveySignalQualityTableEntryThis object represents the entry in the Remote Link Test table. OriWORPIfSiteSurveySignalQualityTableEntry .1.3.6.1.4.1.11898.2.1.2.5.4.2.1 |
oriWORPIfSiteSurveyTableIndexThis object represents a unique entry in the table.ro Integer32 .1.3.6.1.4.1.11898.2.1.2.5.4.2.1.1 |
oriWORPIfSiteSurveyBaseMACAddressThis object represents the MAC address of the base unit being tested
with.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.2.5.4.2.1.2 |
oriWORPIfSiteSurveyBaseNameThis object identifies the name of the base unit being tested with..ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.2.5.4.2.1.3 |
oriWORPIfSiteSurveyMaxSatAllowedThis object identifies the maximum number of satellites is allowed to
be registered with the base unit being tested with.ro Integer32 .1.3.6.1.4.1.11898.2.1.2.5.4.2.1.4 |
oriWORPIfSiteSurveyNumSatRegisteredThis object identifies the maximum number of satellites is allowed to
be registered with the base unit being tested with.ro Integer32 .1.3.6.1.4.1.11898.2.1.2.5.4.2.1.5 |
oriWORPIfSiteSurveyCurrentSatRegisteredThis object identifies the maximum number of satellites is allowed to
be registered with the base unit being tested with.ro Integer32 .1.3.6.1.4.1.11898.2.1.2.5.4.2.1.6 |
oriWORPIfSiteSurveyLocalSignalLevelThe current signal level (in dB) for the Site Survey from this
station. This object indicates the running average of the local
signal level using the algorithm (3/4*oldvalue + 1/4*newvalue).ro Integer32 .1.3.6.1.4.1.11898.2.1.2.5.4.2.1.7 |
oriWORPIfSiteSurveyLocalNoiseLevelThe current noise level (in dB) for the Site Survey to this station.
This object indicates the running average of the local noise
level.ro Integer32 .1.3.6.1.4.1.11898.2.1.2.5.4.2.1.8 |
oriWORPIfSiteSurveyLocalSNRThe current signal to noise ratio for the Site Survey to this
station.ro Integer32 .1.3.6.1.4.1.11898.2.1.2.5.4.2.1.9 |
oriWORPIfSiteSurveyRemoteSignalLevelThe current signal level (in dB) for the Site Survey from the base
with which the current satellite is registered. This object indicates
the running average of the local signal level using the
algorithm (3/4*oldvalue + 1/4*newvalue).ro Integer32 .1.3.6.1.4.1.11898.2.1.2.5.4.2.1.10 |
oriWORPIfSiteSurveyRemoteNoiseLevelThe current noise level (in dB) for the Site Survey from the base
with which the current satellite is registered.ro Integer32 .1.3.6.1.4.1.11898.2.1.2.5.4.2.1.11 |
oriWORPIfSiteSurveyRemoteSNRThe current SNR (in dB) for the Site Survey from the base
with which the current satellite is registered.ro Integer32 .1.3.6.1.4.1.11898.2.1.2.5.4.2.1.12 |
orinocoWORPIfRoaming OBJECT IDENTIFIER .1.3.6.1.4.1.11898.2.1.2.5.5 |
oriWORPIfRoamingStatusThis object is used to enable/disable Roaming between BSUs.rw ObjStatus .1.3.6.1.4.1.11898.2.1.2.5.5.1 |
oriWORPIfRoamingSlowScanThresholdThis object specifies the threshold for initiating slow scanning
procedure. The units of this object is dBs.rw Integer32 .1.3.6.1.4.1.11898.2.1.2.5.5.2 |
oriWORPIfRoamingFastScanThresholdThis object specifies the threshold for initiating fast scanning
procedure. The units of this object is dBs.rw Integer32 .1.3.6.1.4.1.11898.2.1.2.5.5.3 |
oriWORPIfRoamingThresholdThis object specifies the threshold for roaming threshold.
The units of this object is dBs.rw Integer32 .1.3.6.1.4.1.11898.2.1.2.5.5.4 |
oriWORPIfRoamingSlowScanPercentThresholdThis object specifies the threshold percentage of retransmissions for initiating slow scanning
procedure.rw INTEGER .1.3.6.1.4.1.11898.2.1.2.5.5.5 |
oriWORPIfRoamingFastScanPercentThresholdThis object specifies the threshold percentage of retransmissions for initiating fast scanning
procedure.rw INTEGER .1.3.6.1.4.1.11898.2.1.2.5.5.6 |
orinocoWORPIfDDRS OBJECT IDENTIFIER .1.3.6.1.4.1.11898.2.1.2.5.6 |
oriWORPIfDDRSStatusThis is object is used to enable/disable the WORP DDRS feature on
the BSU.rw ObjStatus .1.3.6.1.4.1.11898.2.1.2.5.6.1 |
oriWORPIfDDRSDefDataRateThis is the data rate that shall be used only when DDRS
is enabled. This is to specify default data rate on BSU.
The possible values of the variable shall be:
1. 802.11a normal mode 6Mbps
2. 802.11a normal mode 9Mbps
3. 802.11a normal mode 12Mbps
4. 802.11a normal mode 18Mbps
5. 802.11a normal mode 24Mbps
6. 802.11a normal mode 36Mbps
7. 802.11a normal mode 48Mbps
8. 802.11a normal mode 54Mbps
9. 802.11a turbo mode 12Mbps
10. 802.11a turbo mode 18Mbps
11. 802.11a turbo mode 24Mbps
12. 802.11a turbo mode 36Mbps
13. 802.11a turbo mode 48Mbps
14. 802.11a turbo mode 72Mbps
15. 802.11a turbo mode 96Mbps
16. 802.11a turbo mode 108Mbpsrw Integer32 .1.3.6.1.4.1.11898.2.1.2.5.6.2 |
oriWORPIfDDRSMaxDataRateThis is the data rate that shall be used only when DDRS
is enabled. This is to limit maximum possible data rate
that is set by DDRS on BSU.
The possible values of the variable shall be:
1. 802.11a normal mode 6Mbps
2. 802.11a normal mode 9Mbps
3. 802.11a normal mode 12Mbps
4. 802.11a normal mode 18Mbps
5. 802.11a normal mode 24Mbps
6. 802.11a normal mode 36Mbps
7. 802.11a normal mode 48Mbps
8. 802.11a normal mode 54Mbps
9. 802.11a turbo mode 12Mbps
10. 802.11a turbo mode 18Mbps
11. 802.11a turbo mode 24Mbps
12. 802.11a turbo mode 36Mbps
13. 802.11a turbo mode 48Mbps
14. 802.11a turbo mode 72Mbps
15. 802.11a turbo mode 96Mbps
16. 802.11a turbo mode 108Mbpsrw Integer32 .1.3.6.1.4.1.11898.2.1.2.5.6.3 |
oriWORPIfDDRSMinReqSNRdot11an6MbpsThis is to specify the minimum required SNR for data rate
of 6Mbps on 802.11a radio, normal mode. The value should be
in dB and in the range 0..50 dB. The default value should be 6dB.rw Integer32 .1.3.6.1.4.1.11898.2.1.2.5.6.4 |
oriWORPIfDDRSMinReqSNRdot11an9MbpsThis is to specify the minimum required SNR for data rate
of 9Mbps on 802.11a radio, normal mode. The value should be
in dB and in the range 0..50 dB. The default value should be 7dB.rw Integer32 .1.3.6.1.4.1.11898.2.1.2.5.6.5 |
oriWORPIfDDRSMinReqSNRdot11an12MbpsThis is to specify the minimum required SNR for data rate
of 12Mbps on 802.11a radio, normal mode. The value should be
in dB and in the range 0..50 dB. The default value should be 9dB.rw Integer32 .1.3.6.1.4.1.11898.2.1.2.5.6.6 |
oriWORPIfDDRSMinReqSNRdot11an18MbpsThis is to specify the minimum required SNR for data rate
of 18Mbps on 802.11a radio, normal mode. The value should be
in dB and in the range 0..50 dB. The default value should be 11dB.rw Integer32 .1.3.6.1.4.1.11898.2.1.2.5.6.7 |
oriWORPIfDDRSMinReqSNRdot11an24MbpsThis is to specify the minimum required SNR for data rate
of 24Mbps on 802.11a radio, normal mode. The value should be
in dB and in the range 0..50 dB. The default value should be 14dB.rw Integer32 .1.3.6.1.4.1.11898.2.1.2.5.6.8 |
oriWORPIfDDRSMinReqSNRdot11an36MbpsThis is to specify the minimum required SNR for data rate
of 36Mbps on 802.11a radio, normal mode. The value should be
in dB and in the range 0..50 dB. The default value should be 18dB.rw Integer32 .1.3.6.1.4.1.11898.2.1.2.5.6.9 |
oriWORPIfDDRSMinReqSNRdot11an48MbpsThis is to specify the minimum required SNR for data rate
of 48Mbps on 802.11a radio, normal mode. The value should be
in dB and in the range 0..50 dB. The default value should be 22dB.rw Integer32 .1.3.6.1.4.1.11898.2.1.2.5.6.10 |
oriWORPIfDDRSMinReqSNRdot11an54MbpsThis is to specify the minimum required SNR for data rate
of 54Mbps on 802.11a radio, normal mode. The value should be
in dB and in the range 0..50 dB. The default value should be 25dB.rw Integer32 .1.3.6.1.4.1.11898.2.1.2.5.6.11 |
oriWORPIfDDRSMinReqSNRdot11at12MbpsThis is to specify the minimum required SNR for data rate
of 12Mbps on 802.11a radio, turbo mode. The value should be
in dB and in the range 0..50 dB. The default value should be 6dB.rw Integer32 .1.3.6.1.4.1.11898.2.1.2.5.6.12 |
oriWORPIfDDRSMinReqSNRdot11at18MbpsThis is to specify the minimum required SNR for data rate
of 18Mbps on 802.11a radio, turbo mode. The value should be
in dB and in the range 0..50 dB. The default value should be 7dB.rw Integer32 .1.3.6.1.4.1.11898.2.1.2.5.6.13 |
oriWORPIfDDRSMinReqSNRdot11at24MbpsThis is to specify the minimum required SNR for data rate
of 24Mbps on 802.11a radio, turbo mode. The value should be
in dB and in the range 0..50 dB. The default value should be 9dB.rw Integer32 .1.3.6.1.4.1.11898.2.1.2.5.6.14 |
oriWORPIfDDRSMinReqSNRdot11at36MbpsThis is to specify the minimum required SNR for data rate
of 36Mbps on 802.11a radio, turbo mode. The value should be
in dB and in the range 0..50 dB. The default value should be 11dB.rw Integer32 .1.3.6.1.4.1.11898.2.1.2.5.6.15 |
oriWORPIfDDRSMinReqSNRdot11at48MbpsThis is to specify the minimum required SNR for data rate
of 48Mbps on 802.11a radio, turbo mode. The value should be
in dB and in the range 0..50 dB. The default value should be 14dB.rw Integer32 .1.3.6.1.4.1.11898.2.1.2.5.6.16 |
oriWORPIfDDRSMinReqSNRdot11at72MbpsThis is to specify the minimum required SNR for data rate
of 72Mbps on 802.11a radio, turbo mode. The value should be
in dB and in the range 0..50 dB. The default value should be 18dB.rw Integer32 .1.3.6.1.4.1.11898.2.1.2.5.6.17 |
oriWORPIfDDRSMinReqSNRdot11at96MbpsThis is to specify the minimum required SNR for data rate
of 96Mbps on 802.11a radio, turbo mode. The value should be
in dB and in the range 0..50 dB. The default value should be 22dB.rw Integer32 .1.3.6.1.4.1.11898.2.1.2.5.6.18 |
oriWORPIfDDRSMinReqSNRdot11at108MbpsThis is to specify the minimum required SNR for data rate
of 108Mbps on 802.11a radio, turbo mode. The value should be
in dB and in the range 0..50 dB. The default value should be 25dB.rw Integer32 .1.3.6.1.4.1.11898.2.1.2.5.6.19 |
oriWORPIfDDRSDataRateIncAvgSNRThresholdThis is to specify average SNR threshold for data rate increase.
The value should be in dB and in the range 0..50 dB.
The default value should be 4 dB.rw Integer32 .1.3.6.1.4.1.11898.2.1.2.5.6.20 |
oriWORPIfDDRSDataRateIncReqSNRThresholdThis is to specify average SNR threshold for data rate decrease.
The value should be in dB and in the range 0..50 dB.
The default value should be 6 dB.rw Integer32 .1.3.6.1.4.1.11898.2.1.2.5.6.21 |
oriWORPIfDDRSDataRateDecReqSNRThresholdThis is to specify SNRreq threshold for data rate reduction.
The value should be in dB and in the range 0..50 dB.
The default value should be 3 dB.rw Integer32 .1.3.6.1.4.1.11898.2.1.2.5.6.22 |
oriWORPIfDDRSDataRateIncPercentThresholdThis object specifies the threshold percentage of retransmissions for
DDRS data rate increase.rw INTEGER .1.3.6.1.4.1.11898.2.1.2.5.6.23 |
oriWORPIfDDRSDataRateDecPercentThresholdThis object specifies the threshold percentage of retransmissions for
DDRS data rate decrease.rw INTEGER .1.3.6.1.4.1.11898.2.1.2.5.6.24 |
orinocoWORPIfBSU OBJECT IDENTIFIER .1.3.6.1.4.1.11898.2.1.2.5.7 |
orinocoWORPIfBSUStat OBJECT IDENTIFIER .1.3.6.1.4.1.11898.2.1.2.5.7.1 |
orinocoWORPIfBSUStatMACAddressThis object represents the MAC address of BSU to which the SU
is registered.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.2.5.7.1.1 |
orinocoWORPIfBSUStatLocalTxRateThis object represents the Transmit Data Rate of the SU.ro INTEGER .1.3.6.1.4.1.11898.2.1.2.5.7.1.2 |
orinocoWORPIfBSUStatRemoteTxRateThis object represents the Transmit Data Rate of the BSU
to which the SU is registered.ro INTEGER .1.3.6.1.4.1.11898.2.1.2.5.7.1.3 |
orinocoWORPIfBSUStatAverageLocalSignalThe current signal level calculated over all inbound packets.
This variable indicates the running average of the SU's local
signal level using the algorithm (3/4*oldvalue + 1/4*newvalue).ro Integer32 (-102..-10) .1.3.6.1.4.1.11898.2.1.2.5.7.1.4 |
orinocoWORPIfBSUStatAverageLocalNoiseThe current noise level calculated over all inbound packets.
This variable indicates the running average of the SU's
local noise level using the algorithm (3/4*oldvalue + 1/4*newvalue).ro Integer32 (-102..-10) .1.3.6.1.4.1.11898.2.1.2.5.7.1.5 |
orinocoWORPIfBSUStatAverageRemoteSignalThe current remote signal level calculated over the inbound
packets received at SU, sent by the BSU. This variable indicates the
running average of the SU's Rx Signal level(i.e. BSU's Tx Signal level)
all registered stations of the remote signal level using the
algorithm (3/4*oldvalue + 1/4*newvalue).ro Integer32 (-102..-10) .1.3.6.1.4.1.11898.2.1.2.5.7.1.6 |
orinocoWORPIfBSUStatAverageRemoteNoiseThe current remote noise level calculated over the inbound
packets received at SU, sent by the BSU. This variable indicates the
running average of the SU's Rx Noise level(i.e. BSU's Tx Noise level)
all registered stations of the remote noise level using the
algorithm (3/4*oldvalue + 1/4*newvalue).ro Integer32 (-102..-10) .1.3.6.1.4.1.11898.2.1.2.5.7.1.7 |
orinocoNet OBJECT IDENTIFIER .1.3.6.1.4.1.11898.2.1.3 |
orinocoNetIP OBJECT IDENTIFIER .1.3.6.1.4.1.11898.2.1.3.1 |
oriNetworkIPConfigTableThis table contains the Network IP configuration for the network
interface(s) of the device. For bridge mode, only the address
assigned to the Ethernet interface (index 1) will be used. SEQUENCE OF OriNetworkIPConfigTableEntry .1.3.6.1.4.1.11898.2.1.3.1.1 |
oriNetworkIPConfigTableEntryThis object represents an entry for the network IP configuration
for each interface in the system. OriNetworkIPConfigTableEntry .1.3.6.1.4.1.11898.2.1.3.1.1.1 |
oriNetworkIPConfigTableIndexThis object represents an index or interface number in the
network IP configuration table.ro Integer32 .1.3.6.1.4.1.11898.2.1.3.1.1.1.1 |
oriNetworkIPConfigIPAddressThis object represents the IP Address of the network interface.rw IpAddress .1.3.6.1.4.1.11898.2.1.3.1.1.1.2 |
oriNetworkIPConfigSubnetMaskThis object represents the subnet mask of the network interface.rw IpAddress .1.3.6.1.4.1.11898.2.1.3.1.1.1.3 |
oriNetworkIPDefaultRouterIPAddressThis object represents the IP address of the gateway or router
of the device.rw IpAddress .1.3.6.1.4.1.11898.2.1.3.1.3 |
oriNetworkIPDefaultTTLThe default value inserted into the Time-To-Live (TTL) field of
the IP header of datagrams originated at this entity, whenever a
TTL value is not supplied by the transport layer protocol.rw Integer32 .1.3.6.1.4.1.11898.2.1.3.1.4 |
oriNetworkIPAddressTypeThis object identifies if the device is configured to be
assigned a static or dynamic IP address using a DHCP client.rw Enumeration .1.3.6.1.4.1.11898.2.1.3.1.5 |
orinocoSNMP OBJECT IDENTIFIER .1.3.6.1.4.1.11898.2.1.4 |
oriSNMPReadPasswordThis object represents the read-only community name used in the
SNMP protocol. This object is used for reading objects from the
SNMP agent. This object should be treated as write-only and
returned as asterisks.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.4.1 |
oriSNMPReadWritePasswordThis objecgt represents the read-write community name used in
the SNMP protocol. This object is used for reading and writing
objects to and from the SNMP Agent. This object should be treated
as write-only and returned as asterisks.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.4.2 |
oriSNMPAuthorizedManagerCountThis object reflects the number of entries in the Management IP
Access Table.ro Counter32 .1.3.6.1.4.1.11898.2.1.4.3 |
oriSNMPAccessTableThis table is used configure management stations that are
authorized to manage the device. This table applies to the
supported management services/interfaces (SNMP, HTTP, and Telnet).
This table is limited to 20 entries. SEQUENCE OF OriSNMPAccessTableEntry .1.3.6.1.4.1.11898.2.1.4.4 |
oriSNMPAccessTableEntryThis object identifies an entry in the Management IP Access
Table. OriSNMPAccessTableEntry .1.3.6.1.4.1.11898.2.1.4.4.1 |
oriSNMPAccessTableIndexThis object represents the index for the Management IP Access
Table.ro Integer32 .1.3.6.1.4.1.11898.2.1.4.4.1.1 |
oriSNMPAccessTableIPAddressThis object represents the IP address of the management station
authorized to manage the device.rw IpAddress .1.3.6.1.4.1.11898.2.1.4.4.1.2 |
oriSNMPAccessTableIPMaskThis object represents the IP subnet mask. This object can
be used to grant access to a complete subnet.rw IpAddress .1.3.6.1.4.1.11898.2.1.4.4.1.3 |
oriSNMPAccessTableInterfaceBitmaskThis object is used to control the interface access for each
table entry in the Management IP Access Table.rw InterfaceBitmask .1.3.6.1.4.1.11898.2.1.4.4.1.4 |
oriSNMPAccessTableCommentThis object is used for an optional comment associated to the
Management IP Access Table entry.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.4.4.1.5 |
oriSNMPAccessTableEntryStatusThis object is used to enable, disable, delete, or create an
entry in the Management IP Access Table.rw Enumeration .1.3.6.1.4.1.11898.2.1.4.4.1.6 |
oriSNMPTrapHostTableThis table contains the information regarding the trap host that
will receive SNMP traps sent by the device. This table is limited
10 entries. SEQUENCE OF OriSNMPTrapHostTableEntry .1.3.6.1.4.1.11898.2.1.4.5 |
oriSNMPTrapHostTableEntryThis object identifies an entry in the SNMP Trap Host Table. OriSNMPTrapHostTableEntry .1.3.6.1.4.1.11898.2.1.4.5.1 |
oriSNMPTrapHostTableIndexThis object is used as an index for the SNMP Trap Host Table.ro Integer32 .1.3.6.1.4.1.11898.2.1.4.5.1.1 |
oriSNMPTrapHostTableIPAddressThis object represents the IP address of the management station
that will receive SNMP Traps from the device.rw IpAddress .1.3.6.1.4.1.11898.2.1.4.5.1.2 |
oriSNMPTrapHostTablePasswordThis object represents the password that is sent with the SNMP
trap messages to allow the host to accept or reject the traps.
The trap host will only accept SNMP traps if this password matches
the host's password. This object should be treated as write-only
and returned as asterisks.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.4.5.1.3 |
oriSNMPTrapHostTableCommentThis object is used for an optional comment associated to the
SNMP Trap Host Table entry.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.4.5.1.4 |
oriSNMPTrapHostTableEntryStatusThis object is used to enable, disable, delete, create an
entry in the SNMP Trap Host Table.rw Enumeration .1.3.6.1.4.1.11898.2.1.4.5.1.5 |
oriSNMPInterfaceBitmaskThis object is used to control the interface access for SNMP
based management (not HTTP and Telnet).rw InterfaceBitmask .1.3.6.1.4.1.11898.2.1.4.7 |
oriSNMPErrorMessageThis object is used to provide additional information in case of
an SNMP error.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.4.8 |
oriSNMPAccessTableStatusThis object is used to enable or disable the Management IP Access
Table. If this object is disabled, the check based on source IP
address for the enteries in the Management IP Access Table will not
be performed.rw Enumeration .1.3.6.1.4.1.11898.2.1.4.9 |
oriSNMPTrapTypeThis object is used to configure the SNMP trap/notification type
that will be generated.rw Enumeration .1.3.6.1.4.1.11898.2.1.4.10 |
oriSNMPSecureManagementStatusThis object is used to enable or disable the secure Management
feature for the Access Point. With this object enabled, view
based access control will be enforced on all forms of management
including SNMPv1/v2c, HTTP, WEB, HTTPS, SSH, serial, and Telnet.
Also SNMPv3 user security model will be enabled. The default SNMPv3
user is defined as userName 'administrator', with SHA authentication
and DES privacy protocols.rw Enumeration .1.3.6.1.4.1.11898.2.1.4.11 |
oriSNMPV3AuthPasswordThis object represents the SNMPv3 administrator authentication
password. This object should be treated as write-only and returned
as asterisks.rw DisplayString .1.3.6.1.4.1.11898.2.1.4.12 |
oriSNMPV3PrivPasswordThis object represents the SNMPv3 administrator privacy password.
This object should be treated as write-only and returned as asterisks.rw DisplayString .1.3.6.1.4.1.11898.2.1.4.13 |
orinocoFiltering OBJECT IDENTIFIER .1.3.6.1.4.1.11898.2.1.5 |
orinocoProtocolFilter OBJECT IDENTIFIER .1.3.6.1.4.1.11898.2.1.5.1 |
oriProtocolFilterOperationTypeThis object is used to passthru (allow) or block (deny) packets
with protocols in the protocol filter table.rw Enumeration .1.3.6.1.4.1.11898.2.1.5.1.1 |
oriProtocolFilterTableThis table contains the two byte hexadecimal values of the
protocols. The packets whose protocol field matches with any of
the entries in this table will be forwarded or dropped based on
value of oriProtocolFilterFlag. This table is limited to 256
ethernet protocols (enteries). SEQUENCE OF OriProtocolFilterTableEntry .1.3.6.1.4.1.11898.2.1.5.1.2 |
oriProtocolFilterTableEntryThis object represents an entry in the protocol filter table. OriProtocolFilterTableEntry .1.3.6.1.4.1.11898.2.1.5.1.2.1 |
oriProtocolFilterTableIndexThis object is used to index the protocol filter table.ro Integer32 .1.3.6.1.4.1.11898.2.1.5.1.2.1.1 |
oriProtocolFilterProtocolThis object represents a two byte hexadecimal value for the
Ethernet protocol to be filtered (the protocol field of the
Ethernet packet).rw OCTET STRING .1.3.6.1.4.1.11898.2.1.5.1.2.1.2 |
oriProtocolFilterProtocolCommentThis object is used as an optional comment for the ethernet
protocol to be filtered.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.5.1.2.1.3 |
oriProtocolFilterTableEntryStatusThis object is used to enable, disable, delete, create the
Ethernet protocols in this table.rw Enumeration .1.3.6.1.4.1.11898.2.1.5.1.2.1.4 |
oriProtocolFilterTableInterfaceBitmaskThis object is isued to control protocol filtering per interface
for each entry in this table.rw InterfaceBitmask .1.3.6.1.4.1.11898.2.1.5.1.2.1.5 |
oriProtocolFilterProtocolStringThis object represents the value in the protocol field of the
Ethernet packet. The value is of 4-digit Hex format.
Example: The value of IP protocol is 0800.
The value of ARP protocol is 0806.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.5.1.2.1.6 |
oriProtocolFilterInterfaceBitmaskThis object is isued to control protocol filtering per interface
for the table.rw InterfaceBitmask .1.3.6.1.4.1.11898.2.1.5.1.3 |
orinocoAccessControl OBJECT IDENTIFIER .1.3.6.1.4.1.11898.2.1.5.2 |
oriAccessControlStatusThis object is used to enable or disable MAC Access Control
feature/filter in the device.rw Enumeration .1.3.6.1.4.1.11898.2.1.5.2.1 |
oriAccessControlOperationTypeThis flag determines whether the stations with MAC addresses
listed in the access control table will be allowed or denied
access. This flag is used only if oriAccessControlStatus is
enabled. This table is limited to 1000 MAC Address entries.rw Enumeration .1.3.6.1.4.1.11898.2.1.5.2.2 |
oriAccessControlTableThis table contains the information about MAC addresses of the
wireless stations that are either allowed or disallowed access
(based on oriAccessControlOperation) through this device.
This table is used only if oriAccessControlStatus is enabled. SEQUENCE OF OriAccessControlEntry .1.3.6.1.4.1.11898.2.1.5.2.3 |
oriAccessControlEntryThis object represents the entry in the access control table. OriAccessControlEntry .1.3.6.1.4.1.11898.2.1.5.2.3.1 |
oriAccessControlTableIndexThis object is used as an index for the access control table.ro Integer32 .1.3.6.1.4.1.11898.2.1.5.2.3.1.1 |
oriAccessControlTableMACAddressThis object represents the MAC address of the wireless station
that can access the device.rw PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.5.2.3.1.2 |
oriAccessControlTableCommentThis object is used as an optional comment associated to the
access control table entry.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.5.2.3.1.3 |
oriAccessControlTableEntryStatusThis object is used to enable, disable, delete, create the entries
in the Access Control Table.rw Enumeration .1.3.6.1.4.1.11898.2.1.5.2.3.1.4 |
orinocoStaticMACAddressFilter OBJECT IDENTIFIER .1.3.6.1.4.1.11898.2.1.5.3 |
oriStaticMACAddressFilterTableThis table provides the MAC address of the stations on the wired
and the wireless interface; the MAC addresses will be given in
pairs. Stations listed in the Static MAC Address filter will
have no traffic forwarded by the device. This way Multicast
traffic exchanged between stations or servers can be prevented,
from being transmitted over the wireless medium when both stations
are actually located on the wired backbone. This table is limited
to 200 entries. SEQUENCE OF OriStaticMACAddressFilterEntry .1.3.6.1.4.1.11898.2.1.5.3.1 |
oriStaticMACAddressFilterEntryThis object identifies the entry in the Static MAC address
filter table. OriStaticMACAddressFilterEntry .1.3.6.1.4.1.11898.2.1.5.3.1.1 |
oriStaticMACAddressFilterTableIndexThis object is used as an index for the Static MAC address
filter table.ro Integer32 .1.3.6.1.4.1.11898.2.1.5.3.1.1.1 |
oriStaticMACAddressFilterWiredAddressThis object represents the MAC address of the station on the
wired interface of the device.rw PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.5.3.1.1.2 |
oriStaticMACAddressFilterWiredMaskThis mask determines the presence of wildcard characters in the
MAC address of the station on the wired interface. The value F
(hex digit) in the mask indicates the presence of a wildcard
character and the value 0 indicates its absence.rw PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.5.3.1.1.3 |
oriStaticMACAddressFilterWirelessAddressThis object represents the MAC address of the station on the
wireless interface.rw PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.5.3.1.1.4 |
oriStaticMACAddressFilterWirelessMaskThe mask that determines the presence of wildcard characters in
the MAC address of the station on the wireless side. The value F
(hex digit) indicates the presence of a wildcard character and the
hex digit 0 indicates its absense.rw PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.5.3.1.1.5 |
oriStaticMACAddressFilterTableEntryStatusThis object is used to enable, disable, delete, create an entry
in the Static MAC Address Table.rw Enumeration .1.3.6.1.4.1.11898.2.1.5.3.1.1.6 |
oriStaticMACAddressFilterCommentThis object is used for an optional comment associated to the
access control table entry.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.5.3.1.1.7 |
orinocoStormThreshold OBJECT IDENTIFIER .1.3.6.1.4.1.11898.2.1.5.4 |
oriBroadcastAddressThresholdIf broadcast rate from any device (identified by its MAC address)
exceeds the limit specified by this value, the device will
ignore all subsequent messages issued by the particular network
device, or ignore all messages of that type. Valid values for
address threshold is between 0 - 255 frames per second. Initial
Value is 0 (Disable Storm Threshold Protection).rw Integer32 .1.3.6.1.4.1.11898.2.1.5.4.1 |
oriMulticastAddressThresholdIf multicast rate from any device (identified by its MAC address)
exceeds the limit specified by this value, the device will
ignore all subsequent messages issued by the particular network
device, or ignore all messages of that type. Valid values for
address threshold is between 0 - 255 frames per second. Initial
Value is 0 (Disable Storm Threshold Protection).rw Integer32 .1.3.6.1.4.1.11898.2.1.5.4.2 |
oriStormThresholdTableThe table containing broadcast and multicast threshold values for
each interface. SEQUENCE OF OriStormThresholdTableEntry .1.3.6.1.4.1.11898.2.1.5.4.3 |
oriStormThresholdTableEntryThis object represents an entry in the storm threshold filter
table. OriStormThresholdTableEntry .1.3.6.1.4.1.11898.2.1.5.4.3.1 |
oriStormThresholdIfBroadcastThis parameter specifies a set of Broadcast Storm thresholds for
each interface/port of the device, identifying separate
values for the number of Broadcast messages/second. Default value
is zero, which means disabled.rw Integer32 .1.3.6.1.4.1.11898.2.1.5.4.3.1.1 |
oriStormThresholdIfMulticastThis parameter specifies a set of Multicast Storm thresholds for
each interface/port of the device, identifying separate
values for the number of Multicast messages/second. Default value
is zero, which means disabled.rw Integer32 .1.3.6.1.4.1.11898.2.1.5.4.3.1.2 |
orinocoPortFilter OBJECT IDENTIFIER .1.3.6.1.4.1.11898.2.1.5.5 |
oriPortFilterStatusThis object is used to enable or disable port filtering.rw Enumeration .1.3.6.1.4.1.11898.2.1.5.5.1 |
oriPortFilterOperationTypeThis object determines whether the stations with ports
listed in the port filter table must be allowed (passthru) or
denied (block) to access the device. This object is used only if
oriPacketFilterStatus is enabled.rw Enumeration .1.3.6.1.4.1.11898.2.1.5.5.2 |
oriPortFilterTableThis table contains the Port number of packets to be filtered.
The packets whose port field matches with any of the enabled entries in
this table will be blocked (dropped). This table is limited to
256 entries. SEQUENCE OF OriPortFilterTableEntry .1.3.6.1.4.1.11898.2.1.5.5.3 |
oriPortFilterTableEntryThis parameter represents the entry in the port filter table. OriPortFilterTableEntry .1.3.6.1.4.1.11898.2.1.5.5.3.1 |
oriPortFilterTableEntryIndexThis object is used as the index for the port filter table. This
table supports up to 256 entries.ro Integer32 .1.3.6.1.4.1.11898.2.1.5.5.3.1.1 |
oriPortFilterTableEntryPortThis object represents the port number of the packets to be
filtered.rw Integer32 .1.3.6.1.4.1.11898.2.1.5.5.3.1.2 |
oriPortFilterTableEntryPortTypeThis object specifies the port type.rw Enumeration .1.3.6.1.4.1.11898.2.1.5.5.3.1.3 |
oriPortFilterTableEntryInterfaceBitmaskThis object is used to control port filtering per interface for
each entry in the table.rw InterfaceBitmask .1.3.6.1.4.1.11898.2.1.5.5.3.1.4 |
oriPortFilterTableEntryCommentThis object is used for an optional comment associated to the
port filter table entry.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.5.5.3.1.5 |
oriPortFilterTableEntryStatusThis object is used to enable, disable, delete, create an entry
in the Port Filter Table.rw Enumeration .1.3.6.1.4.1.11898.2.1.5.5.3.1.6 |
orinocoAdvancedFiltering OBJECT IDENTIFIER .1.3.6.1.4.1.11898.2.1.5.6 |
oriBroadcastFilteringTableThe table entries for broadcast filters. This table shall contain
5 entries. SEQUENCE OF OriBroadcastFilteringTableEntry .1.3.6.1.4.1.11898.2.1.5.6.1 |
oriBroadcastFilteringTableEntryThis object represents an entry in the broadcast filtering
table. OriBroadcastFilteringTableEntry .1.3.6.1.4.1.11898.2.1.5.6.1.1 |
oriBroadcastFilteringTableIndexThis object represents the index of the Broadcast Filtering
table.ro Integer32 .1.3.6.1.4.1.11898.2.1.5.6.1.1.1 |
oriBroadcastFilteringProtocolNameThis object represents the broadcast protocol name to
be filtered.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.5.6.1.1.2 |
oriBroadcastFilteringDirectionThis object represents the direction of the broadcast filter.
The filter can be enabled for Ethernet to Wireless, Wireless
to Ethernet, or both directions.rw Enumeration .1.3.6.1.4.1.11898.2.1.5.6.1.1.3 |
oriBroadcastFilteringTableEntryStatusThis object is used to enable or disable the broadcast filter
table enteries.rw Enumeration .1.3.6.1.4.1.11898.2.1.5.6.1.1.4 |
orinocoPacketForwarding OBJECT IDENTIFIER .1.3.6.1.4.1.11898.2.1.5.7 |
oriPacketForwardingStatusThis object is used to enable or disable the Packet Forwarding
feature.rw Enumeration .1.3.6.1.4.1.11898.2.1.5.7.1 |
oriPacketForwardingMACAddressThis object represents the MAC Address to which all frames will be
forwarded by the device.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.5.7.2 |
oriPacketForwardingInterfaceThis object is used to configure the interface or port that frames
will be forwarded to. If this object is not configured, value set
to zero, then the bridge will forward the packets on the interface
or port the MAC address was learned on. If this object is not
configured, value set to zero, and the bridge has not yet learned the
MAC address then the frames will be forwarded on all interfaces and
ports.rw Integer32 .1.3.6.1.4.1.11898.2.1.5.7.3 |
orinocoIBSSTraffic OBJECT IDENTIFIER .1.3.6.1.4.1.11898.2.1.5.8 |
oriIBSSTrafficOperationThis object is used to control IntraBSS Traffic. If this object
is set to the passthru, then IBSS traffic will be allowed; if this
object is set to block, then IBSS traffic will be denied.rw Enumeration .1.3.6.1.4.1.11898.2.1.5.8.1 |
orinocoIntraCellBlocking OBJECT IDENTIFIER .1.3.6.1.4.1.11898.2.1.5.9 |
oriIntraCellBlockingStatusThis object is used to enable/disable IntraCell Blocking/Filtering.rw ObjStatus .1.3.6.1.4.1.11898.2.1.5.9.1 |
oriIntraCellBlockingMACTableThe MAC table entries for IntraCell Blocking filters. This table
can contain up to a maximum of 250 entries. SEQUENCE OF OriIntraCellBlockingMACTableEntry .1.3.6.1.4.1.11898.2.1.5.9.2 |
oriIntraCellBlockingMACTableEntryThis object represents the entry in the IntraCell Blocking MAC Table. OriIntraCellBlockingMACTableEntry .1.3.6.1.4.1.11898.2.1.5.9.2.1 |
oriIntraCellBlockingMACTableIndexThis object is used as the index to the IntraCell Blocking MAC Table.ro Integer32 .1.3.6.1.4.1.11898.2.1.5.9.2.1.1 |
oriIntraCellBlockingMACTableMACAddressThis object represents the MAC address of the SU which is allowed to
communicate with other SUs with the same group ID.rw PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.5.9.2.1.2 |
oriIntraCellBlockingMACTableGroupID1This object is used to activate/deactivate Group ID 1.rw ObjStatusActive .1.3.6.1.4.1.11898.2.1.5.9.2.1.3 |
oriIntraCellBlockingMACTableGroupID2This object is used to activate/deactivate Group ID 2.rw ObjStatusActive .1.3.6.1.4.1.11898.2.1.5.9.2.1.4 |
oriIntraCellBlockingMACTableGroupID3This object is used to activate/deactivate Group ID 3.rw ObjStatusActive .1.3.6.1.4.1.11898.2.1.5.9.2.1.5 |
oriIntraCellBlockingMACTableGroupID4This object is used to activate/deactivate Group ID 4.rw ObjStatusActive .1.3.6.1.4.1.11898.2.1.5.9.2.1.6 |
oriIntraCellBlockingMACTableGroupID5This object is used to activate/deactivate Group ID 5.rw ObjStatusActive .1.3.6.1.4.1.11898.2.1.5.9.2.1.7 |
oriIntraCellBlockingMACTableGroupID6This object is used to activate/deactivate Group ID 6.rw ObjStatusActive .1.3.6.1.4.1.11898.2.1.5.9.2.1.8 |
oriIntraCellBlockingMACTableGroupID7This object is used to activate/deactivate Group ID 7.rw ObjStatusActive .1.3.6.1.4.1.11898.2.1.5.9.2.1.9 |
oriIntraCellBlockingMACTableGroupID8This object is used to activate/deactivate Group ID 8.rw ObjStatusActive .1.3.6.1.4.1.11898.2.1.5.9.2.1.10 |
oriIntraCellBlockingMACTableGroupID9This object is used to activate/deactivate Group ID 9.rw ObjStatusActive .1.3.6.1.4.1.11898.2.1.5.9.2.1.11 |
oriIntraCellBlockingMACTableGroupID10This object is used to activate/deactivate Group ID 10.rw ObjStatusActive .1.3.6.1.4.1.11898.2.1.5.9.2.1.12 |
oriIntraCellBlockingMACTableGroupID11This object is used to activate/deactivate Group ID 11.rw ObjStatusActive .1.3.6.1.4.1.11898.2.1.5.9.2.1.13 |
oriIntraCellBlockingMACTableGroupID12This object is used to activate/deactivate Group ID 12.rw ObjStatusActive .1.3.6.1.4.1.11898.2.1.5.9.2.1.14 |
oriIntraCellBlockingMACTableGroupID13This object is used to activate/deactivate Group ID 13.rw ObjStatusActive .1.3.6.1.4.1.11898.2.1.5.9.2.1.15 |
oriIntraCellBlockingMACTableGroupID14This object is used to activate/deactivate Group ID 14.rw ObjStatusActive .1.3.6.1.4.1.11898.2.1.5.9.2.1.16 |
oriIntraCellBlockingMACTableGroupID15This object is used to activate/deactivate Group ID 15.rw ObjStatusActive .1.3.6.1.4.1.11898.2.1.5.9.2.1.17 |
oriIntraCellBlockingMACTableGroupID16This object is used to activate/deactivate Group ID 16.rw ObjStatusActive .1.3.6.1.4.1.11898.2.1.5.9.2.1.18 |
oriIntraCellBlockingMACTableEntryStatusThis object is used to enable, disable, delete, create the entries
in the IntraCell Blocking MAC Table.rw Enumeration .1.3.6.1.4.1.11898.2.1.5.9.2.1.19 |
oriIntraCellBlockingGroupTableThe Group table entries for IntraCell Blocking Group IDs.
This table can contain a maximum of 16 entries. SEQUENCE OF OriIntraCellBlockingGroupTableEntry .1.3.6.1.4.1.11898.2.1.5.9.3 |
oriIntraCellBlockingGroupTableEntryThis object represents the entry in the IntraCell Blocking
Group Table. OriIntraCellBlockingGroupTableEntry .1.3.6.1.4.1.11898.2.1.5.9.3.1 |
oriIntraCellBlockingGroupTableIndexThis object is used as the index to the IntraCell Blocking
Group Table.ro Integer32 .1.3.6.1.4.1.11898.2.1.5.9.3.1.1 |
oriIntraCellBlockingGroupTableNameThis object represents the group name.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.5.9.3.1.2 |
oriIntraCellBlockingGroupTableEntryStatusThis object is used to enable, disable, delete, create the entries
in the IntraCell Blocking Group Table.rw Enumeration .1.3.6.1.4.1.11898.2.1.5.9.3.1.3 |
orinocoSecurityGw OBJECT IDENTIFIER .1.3.6.1.4.1.11898.2.1.5.10 |
oriSecurityGwStatusThis object is used to enable/disable the Security Gateway feature.rw ObjStatus .1.3.6.1.4.1.11898.2.1.5.10.1 |
oriSecurityGwMacThis object represents the Security Gateway MAC Address to which
all frames will be forwarded by the device.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.5.10.2 |
orinocoRADIUS OBJECT IDENTIFIER .1.3.6.1.4.1.11898.2.1.6 |
orinocoRADIUSAuth OBJECT IDENTIFIER .1.3.6.1.4.1.11898.2.1.6.1 |
oriRADIUSAuthServerTableThis table represents the RADIUS servers that the device will
communicated with for client authentication. Usually this table
should have two members representing the primary and secondary
(backup) RADIUS Authentication Servers. SEQUENCE OF OriRADIUSAuthServerTableEntry .1.3.6.1.4.1.11898.2.1.6.1.1 |
oriRADIUSAuthServerTableEntryThis object represents an entry in the RADIUS Authentication
Server Table. OriRADIUSAuthServerTableEntry .1.3.6.1.4.1.11898.2.1.6.1.1.1 |
oriRADIUSAuthServerTableIndexThis object is used as an index to the RADIUS Authentication
Server Table.ro Integer32 .1.3.6.1.4.1.11898.2.1.6.1.1.1.1 |
oriRADIUSAuthServerTypeThis object indicates if the RADIUS server will provide
Authentication service, Accounting service, or both.ro Enumeration .1.3.6.1.4.1.11898.2.1.6.1.1.1.2 |
oriRADIUSAuthServerTableEntryStatusThis object identifies if the RADIUS server entry is enabled or
disabled.rw Enumeration .1.3.6.1.4.1.11898.2.1.6.1.1.1.3 |
oriRADIUSAuthServerIPAddressThis object represents the IP address of the RADIUS server.rwdeprecated IpAddress .1.3.6.1.4.1.11898.2.1.6.1.1.1.4 |
oriRADIUSAuthServerDestPortThis object represents the RADIUS server authentication port -
the default value is 1812.rw Integer32 .1.3.6.1.4.1.11898.2.1.6.1.1.1.5 |
oriRADIUSAuthServerSharedSecretThis object represents the shared secret between the RADIUS
server and client. This object should be treated as write-only
and returned as asterisks.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.6.1.1.1.6 |
oriRADIUSAuthServerResponseTimeThis object represents the time (in seconds) for which the
RADIUS client will wait, until another authentication request is
sent to the server.rw Integer32 .1.3.6.1.4.1.11898.2.1.6.1.1.1.7 |
oriRADIUSAuthServerMaximumRetransmissionThis object represents the number of retransmissions of
authentication requests by the RADIUS Client to the Server.rw Integer32 .1.3.6.1.4.1.11898.2.1.6.1.1.1.8 |
oriRADIUSAuthClientAccessRequestsThis object represents the number of RADIUS Access Requests
messages transmitted from the client to the server since client
startup.ro Counter32 .1.3.6.1.4.1.11898.2.1.6.1.1.1.9 |
oriRADIUSAuthClientAccessRetransmissionsThis object represents the number of RADIUS Access Requests
retransmitted by the client to the server since system startup.ro Counter32 .1.3.6.1.4.1.11898.2.1.6.1.1.1.10 |
oriRADIUSAuthClientAccessAcceptsThis object indicates the number of RADIUS Access Accept messages
received since system startup.ro Counter32 .1.3.6.1.4.1.11898.2.1.6.1.1.1.11 |
oriRADIUSAuthClientAccessChallengesThis object represents the number of RADIUS Access Challenges
messages received since system startup.ro Counter32 .1.3.6.1.4.1.11898.2.1.6.1.1.1.12 |
oriRADIUSAuthClientAccessRejectsThis object represents the number of RADIUS Access Rejects
messages received since system startup.ro Counter32 .1.3.6.1.4.1.11898.2.1.6.1.1.1.13 |
oriRADIUSAuthClientMalformedAccessResponsesThis object represents the number of malformed RADIUS Access
Response messages received since system startup.ro Counter32 .1.3.6.1.4.1.11898.2.1.6.1.1.1.14 |
oriRADIUSAuthClientAuthInvalidAuthenticatorsThis object represents the number of malformed RADIUS Access
Response messages containing invalid authenticators received since
system startup.ro Counter32 .1.3.6.1.4.1.11898.2.1.6.1.1.1.15 |
oriRADIUSAuthClientTimeoutsThis object represents the total number of timeouts for RADIUS
Access Request messages since system startup.ro Counter32 .1.3.6.1.4.1.11898.2.1.6.1.1.1.16 |
oriRADIUSAuthServerNameOrIPAddressThis object is used to specify the RADIUS Server host name or
IP Address.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.6.1.1.1.17 |
oriRADIUSAuthServerAddressingFormatThis object is used to specify the addressing format for configuring
the RADIUS Server. If this object is configured to IP Address, then
IP address should be used to specify the server. If this object is
configured to name, then the host name should be specified.rw Enumeration .1.3.6.1.4.1.11898.2.1.6.1.1.1.18 |
orinocoRADIUSAcct OBJECT IDENTIFIER .1.3.6.1.4.1.11898.2.1.6.2 |
oriRADIUSAcctStatusThis object is used to enable or disable the RADIUS Accounting
service. This object has been deprecated.rwdeprecated Enumeration .1.3.6.1.4.1.11898.2.1.6.2.1 |
oriRADIUSAcctInactivityTimerThis parameter represents the inactivity or idle timeout in
minutes after which an Accounting Stop request is sent to the
RADIUS Accounting server - the default value is 5 minutes.
This object has been deprecated.rwdeprecated Integer32 .1.3.6.1.4.1.11898.2.1.6.2.2 |
oriRADIUSAcctServerTableThis table represents the RADIUS servers that the device will
communicated with for accounting. Usually this table should
have two members representing the primary and secondary (backup)
RADIUS Accounting Servers. This object has been deprecated.deprecated SEQUENCE OF OriRADIUSAcctServerTableEntry .1.3.6.1.4.1.11898.2.1.6.2.3 |
oriRADIUSAcctServerTableEntryThis object represents an entry into the RADIUS Accouting
Server Table. This object has been deprecated.deprecated OriRADIUSAcctServerTableEntry .1.3.6.1.4.1.11898.2.1.6.2.3.1 |
oriRADIUSAcctServerTableIndexThis object is used as the index to the RADIUS Server Accounting
table. This object has been deprecated.rodeprecated Integer32 .1.3.6.1.4.1.11898.2.1.6.2.3.1.1 |
oriRADIUSAcctServerTypeThis object indicates if the RADIUS server will provide
Authentication service, Accounting service, or both.
This object has been deprecated.rodeprecated Enumeration .1.3.6.1.4.1.11898.2.1.6.2.3.1.2 |
oriRADIUSAcctServerTableEntryStatusThis object identifies if the RADIUS server entry is enabled or
disabled. This object has been deprecated.rwdeprecated Enumeration .1.3.6.1.4.1.11898.2.1.6.2.3.1.3 |
oriRADIUSAcctServerIPAddressThis object represents the IP address of the RADIUS server.
This object has been deprecated.rwdeprecated IpAddress .1.3.6.1.4.1.11898.2.1.6.2.3.1.4 |
oriRADIUSAcctServerDestPortThis object represents the RADIUS server accounting port -
the default value is 1813. This object has been deprecated.rwdeprecated Integer32 .1.3.6.1.4.1.11898.2.1.6.2.3.1.5 |
oriRADIUSAcctServerSharedSecretThis object represents the shared secret between the RADIUS
server and client. This object should be treated as write-only
and returned as asterisks. This object has been deprecated.rwdeprecated DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.6.2.3.1.6 |
oriRADIUSAcctServerResponseTimeThis object represents the time (in seconds) for which the
RADIUS client will wait, until another accounting request is
sent to the server. This object has been deprecated.rwdeprecated Integer32 .1.3.6.1.4.1.11898.2.1.6.2.3.1.7 |
oriRADIUSAcctServerMaximumRetransmissionThis object represents the number of retransmissions of
accounting requests by the RADIUS Client to the Server.
This object has been deprecated.rwdeprecated Integer32 .1.3.6.1.4.1.11898.2.1.6.2.3.1.8 |
oriRADIUSAcctClientAccountingRequestsThis object represents the number of Accounting Requests messages
sent since system startup. This object has been deprecated.rodeprecated Counter32 .1.3.6.1.4.1.11898.2.1.6.2.3.1.9 |
oriRADIUSAcctClientAccountingRetransmissionsThis object represents the number of Accounting Requests
messages retransmitted sent since system startup.
This object has been deprecated.rodeprecated Counter32 .1.3.6.1.4.1.11898.2.1.6.2.3.1.10 |
oriRADIUSAcctClientAccountingResponsesThis object represents the number of Accounting Response messages
received since system startup. This object has been deprecated.rodeprecated Counter32 .1.3.6.1.4.1.11898.2.1.6.2.3.1.11 |
oriRADIUSAcctClientAcctInvalidAuthenticatorsThis object represents the number of Accounting Response
messages which contain invalid authenticators received since system
startup. This object has been deprecated.rodeprecated Counter32 .1.3.6.1.4.1.11898.2.1.6.2.3.1.12 |
oriRADIUSAcctServerNameOrIPAddressThis object is used to specify the RADIUS Server host name or the
IP Address. This object has been deprecated.rwdeprecated DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.6.2.3.1.13 |
oriRADIUSAcctServerAddressingFormatThis object is used to specify the addressing format for configuring
the RADIUS Server. If this object is configured to IP Address, then
IP address should be used to specify the server. If this object is
configured to name, then the host name should be specified.
This object has been deprecated.rwdeprecated Enumeration .1.3.6.1.4.1.11898.2.1.6.2.3.1.14 |
oriRADIUSAcctUpdateIntervalThis object is used to specify the interval in seconds at which
RADIUS accounting update messages will be sent.
This object has been deprecated.rwdeprecated Integer32 .1.3.6.1.4.1.11898.2.1.6.2.4 |
oriRADIUSClientInvalidServerAddressThis counter represents the total number of RADIUS access-response
messages received from an unknown address since system startup.ro Counter32 .1.3.6.1.4.1.11898.2.1.6.3 |
oriRADIUSMACAccessControlThis object is used to enables RADIUS Access Control based on
wireless stations MAC Address.rw Enumeration .1.3.6.1.4.1.11898.2.1.6.4 |
oriRADIUSAuthorizationLifeTimeThis object represents the authorization lifetime for a certain
MAC based RADIUS authenticated client. A value of zero (0) means that
re-authorization is disabled. The units for this object is seconds.rw Integer32 (0|7200..43200) .1.3.6.1.4.1.11898.2.1.6.5 |
oriRADIUSMACAddressFormatThis object is used to configure the MAC Address format that is to be
used for communication with the RADIUS Server.
Examples of MAC Address Format are:
- Dash Delimited: 00-11-22-AA-BB-CC
- Colon Delimited: 00:11:22:AA:BB:CC
- Single Dash Delimited: 001122-AABBCC
- No Delimiter: 001122AABBCCrw Enumeration .1.3.6.1.4.1.11898.2.1.6.6 |
oriRADIUSLocalUserStatusThis object is used to enable/disable local user support when RADIUS
based management is enabled.rw ObjStatus .1.3.6.1.4.1.11898.2.1.6.7 |
oriRADIUSLocalUserPasswordThis object is the password to access the device when using the
local username - root. This object should be treated as write-only and
returned as asterisks.rw DisplayString .1.3.6.1.4.1.11898.2.1.6.8 |
oriRADIUSbasedManagementAccessProfileThis object is used to configure the RADIUS Server profile that will
be used for RADIUS based management access. The RADIUS profile is
defined in the RADIUS Server Table in the orinocoRADIUSSvrProfile
group.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.6.9 |
orinocoRADIUSSvrProfiles OBJECT IDENTIFIER .1.3.6.1.4.1.11898.2.1.6.10 |
oriRADIUSSvrTableThis table represents the RADIUS server profile that the device will
communicated with for client authentication and/or accounting. This
table has two indices - the first index indicates the profile number
and the second index indicates primary and secondary/backup servers. SEQUENCE OF OriRADIUSSvrTableEntry .1.3.6.1.4.1.11898.2.1.6.10.1 |
oriRADIUSSvrTableEntryThis object represents an entry in the RADIUS Server Table. OriRADIUSSvrTableEntry .1.3.6.1.4.1.11898.2.1.6.10.1.1 |
oriRADIUSSvrTableProfileIndexThis object represents the RADIUS Server profile index.ro Integer32 .1.3.6.1.4.1.11898.2.1.6.10.1.1.1 |
oriRADIUSSvrTablePrimaryOrSecondaryIndexThis object is a second index to the RADIUS Server table, which
identifies a server bein primary or secondary/backup.ro Integer32 .1.3.6.1.4.1.11898.2.1.6.10.1.1.2 |
oriRADIUSSvrTableProfileNameThis object is used to specify a unique name for the RADIUS server
profile.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.6.10.1.1.3 |
oriRADIUSSvrTableAddressingFormatThis object is used to specify the addressing format for configuring
the RADIUS Server. If this object is configured to IP Address, then
IP address should be used to specify the server. If this object is
configured to name, then the host name should be specified.rw Enumeration .1.3.6.1.4.1.11898.2.1.6.10.1.1.4 |
oriRADIUSSvrTableNameOrIPAddressThis object is used to specify the RADIUS Server host name or
IP Address.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.6.10.1.1.5 |
oriRADIUSSvrTableDestPortThis object represents the RADIUS server authentication port -
the default value is 1812.rw Integer32 .1.3.6.1.4.1.11898.2.1.6.10.1.1.6 |
oriRADIUSSvrTableSharedSecretThis object represents the shared secret between the RADIUS
server and client. This object should be treated as write-only
and returned as asterisks.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.6.10.1.1.7 |
oriRADIUSSvrTableResponseTimeThis object represents the time (in seconds) for which the
RADIUS client will wait, until another authentication request is
sent to the server.rw Integer32 .1.3.6.1.4.1.11898.2.1.6.10.1.1.8 |
oriRADIUSSvrTableMaximumRetransmissionThis object represents the number of retransmissions of
authentication requests by the RADIUS Client to the Server.rw Integer32 .1.3.6.1.4.1.11898.2.1.6.10.1.1.9 |
oriRADIUSSvrTableVLANIDThis object represents the VLAND ID that will be used to tag
RADIUS messages from the client to the server.rw VlanId .1.3.6.1.4.1.11898.2.1.6.10.1.1.10 |
oriRADIUSSvrTableMACAddressFormatThis object is used to configure the MAC Address format that is to be
used for communication with the RADIUS Server.
Examples of MAC Address Format are:
- Dash Delimited: 00-11-22-AA-BB-CC
- Colon Delimited: 00:11:22:AA:BB:CC
- Single Dash Delimited: 001122-AABBCC
- No Delimiter: 001122AABBCCrw Enumeration .1.3.6.1.4.1.11898.2.1.6.10.1.1.11 |
oriRADIUSSvrTableAuthorizationLifeTimeThis object represents the authorization lifetime for a certain
MAC based RADIUS authenticated client. A value of zero (0) means that
re-authorization is disabled. The units for this object is seconds.rw Integer32 (0|900..43200) .1.3.6.1.4.1.11898.2.1.6.10.1.1.12 |
oriRADIUSSvrTableAccountingInactivityTimerThis parameter represents the client idle timeout in
minutes. Once this timer has expired an Accounting Stop request
is sent to the RADIUS Accounting Server.rw Integer32 .1.3.6.1.4.1.11898.2.1.6.10.1.1.13 |
oriRADIUSSvrTableAccountingUpdateIntervalThis object is used to specify the interval in seconds at which
RADIUS accounting update messages will be sent. This object is defined
in minutes; a value of zero (0) disables the accouting updates.rw Integer32 (0|10..10080) UNITS "minutes" .1.3.6.1.4.1.11898.2.1.6.10.1.1.14 |
oriRADIUSSvrTableRowStatusThis object represents the status of the RADIUS Server profile.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.6.10.1.1.15 |
oriRADIUSClientInvalidSvrAddressThis counter represents the total number of RADIUS access-response
messages received from an unknown address since system startup.ro Counter32 .1.3.6.1.4.1.11898.2.1.6.10.2 |
oriRADIUSAuthClientStatTableThis table is used to store RADIUS Authentication Client Statistics
for the configured profiles. SEQUENCE OF OriRADIUSAuthClientStatTableEntry .1.3.6.1.4.1.11898.2.1.6.10.3 |
oriRADIUSAuthClientStatTableEntryThis object represents an entry, primary and secondary/backup,
in the RADIUS Authentication Client Statistics table. OriRADIUSAuthClientStatTableEntry .1.3.6.1.4.1.11898.2.1.6.10.3.1 |
oriRADIUSAuthClientStatTableIndexThis object is used as an index to the RADIUS Authentication Client
Statistics Table.ro Integer32 .1.3.6.1.4.1.11898.2.1.6.10.3.1.1 |
oriRADIUSAuthClientStatTablePrimaryOrSecondaryIndexThis object is used as an secondary index to the RADIUS
Authentication Client Statistics Table, which is used to indicate
primary and secondary/backup server statistics.ro Integer32 .1.3.6.1.4.1.11898.2.1.6.10.3.1.2 |
oriRADIUSAuthClientStatTableAccessRequestsThis object represents the number of RADIUS Access Requests
messages transmitted from the client to the server since client
startup.ro Counter32 .1.3.6.1.4.1.11898.2.1.6.10.3.1.3 |
oriRADIUSAuthClientStatTableAccessRetransmissionsThis object represents the number of RADIUS Access Requests
retransmitted by the client to the server since system startup.ro Counter32 .1.3.6.1.4.1.11898.2.1.6.10.3.1.4 |
oriRADIUSAuthClientStatTableAccessAcceptsThis object indicates the number of RADIUS Access Accept messages
received since system startup.ro Counter32 .1.3.6.1.4.1.11898.2.1.6.10.3.1.5 |
oriRADIUSAuthClientStatTableAccessChallengesThis object represents the number of RADIUS Access Challenges
messages received since system startup.ro Counter32 .1.3.6.1.4.1.11898.2.1.6.10.3.1.6 |
oriRADIUSAuthClientStatTableAccessRejectsThis object represents the number of RADIUS Access Rejects
messages received since system startup.ro Counter32 .1.3.6.1.4.1.11898.2.1.6.10.3.1.7 |
oriRADIUSAuthClientStatTableMalformedAccessResponsesThis object represents the number of malformed RADIUS Access
Response messages received since system startup.ro Counter32 .1.3.6.1.4.1.11898.2.1.6.10.3.1.8 |
oriRADIUSAuthClientStatTableBadAuthenticatorsThis object represents the number of malformed RADIUS Access
Response messages containing invalid authenticators received since
system startup.ro Counter32 .1.3.6.1.4.1.11898.2.1.6.10.3.1.9 |
oriRADIUSAuthClientStatTableTimeoutsThis object represents the total number of timeouts for RADIUS
Access Request messages since system startup.ro Counter32 .1.3.6.1.4.1.11898.2.1.6.10.3.1.10 |
oriRADIUSAcctClientStatTableThis table is used to store RADIUS Accounting Client Statistics
for the configured profiles. SEQUENCE OF OriRADIUSAcctClientStatTableEntry .1.3.6.1.4.1.11898.2.1.6.10.4 |
oriRADIUSAcctClientStatTableEntryThis object represents an entry, primary and secondary/backup,
in the RADIUS Accounting Client Statistics table. OriRADIUSAcctClientStatTableEntry .1.3.6.1.4.1.11898.2.1.6.10.4.1 |
oriRADIUSAcctClientStatTableIndexThis object is used as an index to the RADIUS Accounting Client
Statistics Table.ro Integer32 .1.3.6.1.4.1.11898.2.1.6.10.4.1.1 |
oriRADIUSAcctClientStatTablePrimaryOrSecondaryIndexThis object is used as an secondary index to the RADIUS
Accounting Client Statistics Table, which is used to indicate
primary and secondary/backup server statistics.ro Integer32 .1.3.6.1.4.1.11898.2.1.6.10.4.1.2 |
oriRADIUSAcctClientStatTableAccountingRequestsThis object represents the number of RADIUS Accounting Requests
messages transmitted from the client to the server since client
startup.ro Counter32 .1.3.6.1.4.1.11898.2.1.6.10.4.1.3 |
oriRADIUSAcctClientStatTableAccountingRetransmissionsThis object represents the number of RADIUS Accounting Requests
retransmitted by the client to the server since system startup.ro Counter32 .1.3.6.1.4.1.11898.2.1.6.10.4.1.4 |
oriRADIUSAcctClientStatTableAccountingResponsesThis object indicates the number of RADIUS Accounting Response
messages received since system startup.ro Counter32 .1.3.6.1.4.1.11898.2.1.6.10.4.1.5 |
oriRADIUSAcctClientStatTableBadAuthenticatorsThis object represents the number of malformed RADIUS Access
Response messages containing invalid authenticators received since
system startup.ro Counter32 .1.3.6.1.4.1.11898.2.1.6.10.4.1.6 |
orinocoTelnet OBJECT IDENTIFIER .1.3.6.1.4.1.11898.2.1.7 |
oriTelnetSessionsThis object is used to enable or disable telnet access and
to specify the maximum number of active telnet sessions. When this
object is set to 0, telnet access is disabled. When this object
is set to something greater than 0, then it specifies the maximum
number of active telnet sessions. This object has been deprecated.rwdeprecated Integer32 .1.3.6.1.4.1.11898.2.1.7.1 |
oriTelnetPasswordThis object is the password to access the device via the telnet
interface. This object should be treated as write-only and
returned as asterisks.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.7.2 |
oriTelnetPortThis object represents the TCP/IP port for which the telnet
daemon/server will be accessible.rw Integer32 .1.3.6.1.4.1.11898.2.1.7.3 |
oriTelnetLoginTimeoutThis object represents the telnet login timeout in seconds.rw Integer32 .1.3.6.1.4.1.11898.2.1.7.4 |
oriTelnetIdleTimeoutThis object represents the telnet inactivity/idle timeout in
seconds.rw Integer32 .1.3.6.1.4.1.11898.2.1.7.5 |
oriTelnetInterfaceBitmaskThis object is used to control interface access for telnet based
management.rw InterfaceBitmask .1.3.6.1.4.1.11898.2.1.7.6 |
oriTelnetSSHStatusThis object is used to enable or disable CLI access configuration
using secure shell.rw ObjStatus .1.3.6.1.4.1.11898.2.1.7.7 |
oriTelnetSSHHostKeyStatusThis object is used create or delete the SSH Public Host key of the
device.rw Enumeration .1.3.6.1.4.1.11898.2.1.7.8 |
oriTelnetSSHFingerPrintThis object gives the fingerprint of the SSH Public Host key stored
on the device.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.7.9 |
oriTelnetRADIUSAccessControlThis object is used to enable/disable RADIUS Based Authentication for
telnet based management.rw ObjStatus .1.3.6.1.4.1.11898.2.1.7.10 |
orinocoTFTP OBJECT IDENTIFIER .1.3.6.1.4.1.11898.2.1.8 |
oriTFTPServerIPAddressThis object represents the IP address of the TFTP server.rw IpAddress .1.3.6.1.4.1.11898.2.1.8.1 |
oriTFTPFileNameThis object represents the filename to upload or download to the
TFTP server.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.8.2 |
oriTFTPFileTypeThis object is used for the device to know what type of file is
being uploaded or downloaded.rw Enumeration .1.3.6.1.4.1.11898.2.1.8.3 |
oriTFTPOperationThis object represents the TFTP operation to be executed. The
upload function shall transfer the specified file from the
device to the TFTP server. The download function shall transfer
the specified file from the TFTP server to the device. The
download and reboot option, will perform the download and then
reboot the device.rw Enumeration .1.3.6.1.4.1.11898.2.1.8.4 |
oriTFTPFileModeThis objects represents the file transfer mode for the TFTP
protocol.rw Enumeration .1.3.6.1.4.1.11898.2.1.8.5 |
oriTFTPOperationStatusThis object represents the TFTP operation status. When a TFTP
operation is idle (not in progress) this object will be set to 1.
When a TFTP operation is in progress this object will be set to 2.
When a TFTP operation has been successful this object will be set
to 3. When a TFTP operation has failed this object will be set
to 4.ro Enumeration .1.3.6.1.4.1.11898.2.1.8.6 |
oriTFTPAutoConfigStatusThis objects is used to enable/disable the Auto Configuration feature.
This feature allows for a configuration file to be downloaded from
a TFTP server so the AP can be configured via a config file.rw ObjStatus .1.3.6.1.4.1.11898.2.1.8.7 |
oriTFTPAutoConfigFilenameThis object is used to configure the name of the configuration file
to be downloaded using the Auto Configuration feature. This filename
can be configured directly via the end user or can be retrieved in the
DHCP response message when the AP is configured for dynamic IP address
assignment type.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.8.8 |
oriTFTPAutoConfigServerIPAddressThis object is used to configure the TFTP server IP Address. This
object can be configured directly via the end user or can be retrieved
in the DHCP response message when the AP is configured for dynamic IP
address assignment type.rw IpAddress .1.3.6.1.4.1.11898.2.1.8.9 |
oriTFTPDowngradeOn selection of this option, the software will downgrade the
configuration file to the specified release from the current
releaserw Enumeration .1.3.6.1.4.1.11898.2.1.8.10 |
orinocoSerial OBJECT IDENTIFIER .1.3.6.1.4.1.11898.2.1.9 |
oriSerialBaudRateThis object represents the baud rate for the serial interface -
the default value is 9600.rw Enumeration .1.3.6.1.4.1.11898.2.1.9.1 |
oriSerialDataBitsThis object represents the serial interface data bits - the
default value is 8.ro Integer32 .1.3.6.1.4.1.11898.2.1.9.2 |
oriSerialParityThis object is used for the serial interface parity check - the
default value is none.ro Enumeration .1.3.6.1.4.1.11898.2.1.9.3 |
oriSerialStopBitsThis object indicates the serial interface stop bits - the
default value is 1.ro Enumeration .1.3.6.1.4.1.11898.2.1.9.4 |
oriSerialFlowControlThis object is used for the serial interface flow control - the
default value is none.rw Enumeration .1.3.6.1.4.1.11898.2.1.9.5 |
orinocoIAPP OBJECT IDENTIFIER .1.3.6.1.4.1.11898.2.1.10 |
oriIAPPStatusThis object is used to enable or disable the IAPP feature.rw Enumeration .1.3.6.1.4.1.11898.2.1.10.1 |
oriIAPPPeriodicAnnounceIntervalThis object represents interval in seconds for performing an
IAPP announce operation by the device.rw Enumeration .1.3.6.1.4.1.11898.2.1.10.2 |
oriIAPPAnnounceResponseTimeThis object indicates the amount of time in seconds the
device waits to send an IAPP announce response after an announce
request message is sent.ro Integer32 .1.3.6.1.4.1.11898.2.1.10.3 |
oriIAPPHandoverTimeoutThis object represents the time in milliseconds the device
waits before it resends a handover response message. This
object is originally given in kuseconds, but has been converted
to milliseconds.rw Enumeration .1.3.6.1.4.1.11898.2.1.10.4 |
oriIAPPMaximumHandoverRetransmissionsThis object indicates the maximum amount of retransmission sent
by the device for a handover request message.rw Integer32 .1.3.6.1.4.1.11898.2.1.10.5 |
oriIAPPAnnounceRequestSentThis object represents the total number of IAPP Announce
Request Messages sent since system startup.ro Counter32 .1.3.6.1.4.1.11898.2.1.10.6 |
oriIAPPAnnounceRequestReceivedThis object represents the total number of IAPP Announce
Request Messages received since system startup.ro Counter32 .1.3.6.1.4.1.11898.2.1.10.7 |
oriIAPPAnnounceResponseSentThis object represents the total number of IAPP Announce
Response Messages sent since system startup.ro Counter32 .1.3.6.1.4.1.11898.2.1.10.8 |
oriIAPPAnnounceResponseReceivedThis object represents the total number of IAPP Announce
Response Messages received since system startup.ro Counter32 .1.3.6.1.4.1.11898.2.1.10.9 |
oriIAPPHandoverRequestSentThis object represents the total number of IAPP Handover
Request messages sent since system startup.ro Counter32 .1.3.6.1.4.1.11898.2.1.10.10 |
oriIAPPHandoverRequestReceivedThis object represents the total number of IAPP Handover
Request messages received since system startup.ro Counter32 .1.3.6.1.4.1.11898.2.1.10.11 |
oriIAPPHandoverRequestRetransmissionsThis object represents the total number of IAPP Handover
Request retransmissions since system startup.ro Counter32 .1.3.6.1.4.1.11898.2.1.10.12 |
oriIAPPHandoverResponseSentThis object represents the total number of IAPP Handover
Response messages sent since system startup.ro Counter32 .1.3.6.1.4.1.11898.2.1.10.13 |
oriIAPPHandoverResponseReceivedThis object represents the total number of IAPP Handover
Response messages received since system startup.ro Counter32 .1.3.6.1.4.1.11898.2.1.10.14 |
oriIAPPPDUsDroppedThis object represents the total number of IAPP packets dropped
due to erroneous information within the packet since system
startup.ro Counter32 .1.3.6.1.4.1.11898.2.1.10.15 |
oriIAPPRoamingClientsThis object represents the total number of client that have
roamed from one device to another. This parameter is per device
and not a total counter of all the roaming clients for all devices
on the network.ro Counter32 .1.3.6.1.4.1.11898.2.1.10.16 |
oriIAPPMACIPTableThis table contains a list of devices on the network that support
IAPP and have the feature enabled. SEQUENCE OF OriIAPPMACIPTableEntry .1.3.6.1.4.1.11898.2.1.10.21 |
oriIAPPMACIPTableEntryThis object represents an entry in the IAPP table, which
essentially is a device that supports IAPP and has the feature
enabled. OriIAPPMACIPTableEntry .1.3.6.1.4.1.11898.2.1.10.21.1 |
oriIAPPMACIPTableIndexThis object is used as the index for the IAPP MAC-IP table.ro Integer32 .1.3.6.1.4.1.11898.2.1.10.21.1.1 |
oriIAPPMACIPTableSystemNameThis object represents the System Name of the IAPP enabled
device.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.10.21.1.2 |
oriIAPPMACIPTableIPAddressThis object represents the IP Address of the IAPP enabled device.ro IpAddress .1.3.6.1.4.1.11898.2.1.10.21.1.3 |
oriIAPPMACIPTableBSSIDThis object represents the BSSID (MAC address of wireless
interface) of the IAPP enabled device.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.10.21.1.4 |
oriIAPPMACIPTableESSIDThis object represents the ESSID (network name) of the IAPP
enabled device.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.10.21.1.5 |
oriIAPPSendAnnounceRequestOnStartThis object is used to determine whether to send announce request
on start.rw Enumeration .1.3.6.1.4.1.11898.2.1.10.22 |
orinocoLinkTest OBJECT IDENTIFIER .1.3.6.1.4.1.11898.2.1.11 |
oriLinkTestTimeOutThe value of this object determines the time (in seconds) that a
link test will continue without any SNMP requests for a Link Test
Table entry. When the time expires the Link Test Table is
cleared.rw Integer32 .1.3.6.1.4.1.11898.2.1.11.1 |
oriLinkTestIntervalThis object indicates the interval (in milliseconds) between
sending link test frames to a station.rw Integer32 .1.3.6.1.4.1.11898.2.1.11.3 |
oriLinkTestExploreWhen this object is set to 2, the device will send out an explore
request on all 802.11 interfaces and from the results build the
Link Test table. This table is valid only while this object is
set to 3.rw Enumeration .1.3.6.1.4.1.11898.2.1.11.4 |
oriLinkTestTableThis table contains the information for the stations currently
associated with the access point. SEQUENCE OF OriLinkTestTableEntry .1.3.6.1.4.1.11898.2.1.11.5 |
oriLinkTestTableEntryThis object represents the entry in the Remote Link Test table. OriLinkTestTableEntry .1.3.6.1.4.1.11898.2.1.11.5.1 |
oriLinkTestTableIndexThis object represents a unique value for each station. The
value for each station must remain constant at least from one
explore to the next.ro Integer32 .1.3.6.1.4.1.11898.2.1.11.5.1.1 |
oriLinkTestInProgressWhen this object is set to 2 the device will initiate a link test
sequence with this station.rw Enumeration .1.3.6.1.4.1.11898.2.1.11.5.1.2 |
oriLinkTestStationNameThis object identifies the name of the station whom which the
link test is being performed.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.11.5.1.3 |
oriLinkTestMACAddressThis object represents the MAC address that will be mapped to
the IP Address of the station.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.11.5.1.4 |
oriLinkTestStationProfileThis object represents the profile/capabilities for this station.ro Integer32 .1.3.6.1.4.1.11898.2.1.11.5.1.5 |
oriLinkTestOurCurSignalLevelThe current signal level (in dB) for the link test from this
station. This object indicates the running average of the local
signal level using the algorithm (3/4*oldvalue + 1/4*newvalue).ro Integer32 .1.3.6.1.4.1.11898.2.1.11.5.1.6 |
oriLinkTestOurCurNoiseLevelThe current noise level (in dB) for the link test to this station.
This object indicates the running average of the local noise
level.ro Integer32 .1.3.6.1.4.1.11898.2.1.11.5.1.7 |
oriLinkTestOurCurSNRThe current signal to noise ratio for the link test to this
station.ro Integer32 .1.3.6.1.4.1.11898.2.1.11.5.1.8 |
oriLinkTestOurMinSignalLevelThe minimum signal level during the link test to this station.ro Integer32 .1.3.6.1.4.1.11898.2.1.11.5.1.9 |
oriLinkTestOurMinNoiseLevelThe minimum noise level during the link test to this station.ro Integer32 .1.3.6.1.4.1.11898.2.1.11.5.1.10 |
oriLinkTestOurMinSNRThe minimum signal to noise ratio during the link test to this
station.ro Integer32 .1.3.6.1.4.1.11898.2.1.11.5.1.11 |
oriLinkTestOurMaxSignalLevelThe maximum signal level during the link test to this station.ro Integer32 .1.3.6.1.4.1.11898.2.1.11.5.1.12 |
oriLinkTestOurMaxNoiseLevelThe maximum noise level during the link test to this station.ro Integer32 .1.3.6.1.4.1.11898.2.1.11.5.1.13 |
oriLinkTestOurMaxSNRThe maximum signal to noise ratio during the link test to this
station.ro Integer32 .1.3.6.1.4.1.11898.2.1.11.5.1.14 |
oriLinkTestOurLowFrameCountThe total number of frames sent at 1 Mbit/s speed during the link
test to this station.ro Integer32 .1.3.6.1.4.1.11898.2.1.11.5.1.15 |
oriLinkTestOurStandardFrameCountThe total number of frames sent at 2 Mbit/s speed during the link
test to this station.ro Integer32 .1.3.6.1.4.1.11898.2.1.11.5.1.16 |
oriLinkTestOurMediumFrameCountThe total number of frames sent at 5.5 Mbit/s (for Turbo-8, it is
5 Mbit/s) speed during the link test to this station.ro Integer32 .1.3.6.1.4.1.11898.2.1.11.5.1.17 |
oriLinkTestOurHighFrameCountThe total number of frames sent at 11 Mbit/s (for Turbo-8, it is
8 Mbit/s) speed during the link test to this station.ro Integer32 .1.3.6.1.4.1.11898.2.1.11.5.1.18 |
oriLinkTestHisCurSignalLevelThe current signal level for the link test to the remote station
or access point.ro Integer32 .1.3.6.1.4.1.11898.2.1.11.5.1.19 |
oriLinkTestHisCurNoiseLevelThe current noise level for the link test to the remote station
or access point device.ro Integer32 .1.3.6.1.4.1.11898.2.1.11.5.1.20 |
oriLinkTestHisCurSNRThe current signal to noise ratio for the link test to the remote
station or access point device.ro Integer32 .1.3.6.1.4.1.11898.2.1.11.5.1.21 |
oriLinkTestHisMinSignalLevelThe minimum signal level during the link test to the remote station
or access point device.ro Integer32 .1.3.6.1.4.1.11898.2.1.11.5.1.22 |
oriLinkTestHisMinNoiseLevelThe minimum noise level during the link test to the remote station
or access point device.ro Integer32 .1.3.6.1.4.1.11898.2.1.11.5.1.23 |
oriLinkTestHisMinSNRThe minimum signal to noise ratio during the link test to the
remote station or access point device.ro Integer32 .1.3.6.1.4.1.11898.2.1.11.5.1.24 |
oriLinkTestHisMaxSignalLevelThe maximum signal level during the link test to the remote
station or access point device.ro Integer32 .1.3.6.1.4.1.11898.2.1.11.5.1.25 |
oriLinkTestHisMaxNoiseLevelThe maximum noise level during the link test to the remote station
or access point device.ro Integer32 .1.3.6.1.4.1.11898.2.1.11.5.1.26 |
oriLinkTestHisMaxSNRThe maximum signal to noise ratio during the link test to the
remote station or access point device.ro Integer32 .1.3.6.1.4.1.11898.2.1.11.5.1.27 |
oriLinkTestHisLowFrameCountThe total number of frames sent at 1 Mbit/s speed during the link
test to the remote station or access point device.ro Integer32 .1.3.6.1.4.1.11898.2.1.11.5.1.28 |
oriLinkTestHisStandardFrameCountThe total number of frames sent at 2 Mbit/s speed during the link
test to the remote station or access point device.ro Integer32 .1.3.6.1.4.1.11898.2.1.11.5.1.29 |
oriLinkTestHisMediumFrameCountThe total number of frames sent at 5.5 Mbit/s (for Turbo-8, it is
5 Mbit/s) speed during the link test to the remote station or
access point device.ro Integer32 .1.3.6.1.4.1.11898.2.1.11.5.1.30 |
oriLinkTestHisHighFrameCountThe total number of frames sent at 11 Mbit/s (for Turbo-8, it is
5 Mbit/s) speed during the link test to the remote station or
access point device.ro Integer32 .1.3.6.1.4.1.11898.2.1.11.5.1.31 |
oriLinkTestInterfaceThis object represents the wireless interface number to which the
Client has sent the Explore Response Message.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.11.5.1.32 |
oriLinkTestRadioTypeThe Wireless Standard for example IEEE 802.11, 802.11b, 802.11a, or
802.11g being used by the remote station.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.11.5.1.33 |
oriLinkTestDataRateTableThis table contains counters for the data rates for the stations
currently associated to the access point. SEQUENCE OF OriLinkTestDataRateTableEntry .1.3.6.1.4.1.11898.2.1.11.6 |
oriLinkTestDataRateTableEntryThis object represents the entry in the Remote Link Test data
rate counter table. OriLinkTestDataRateTableEntry .1.3.6.1.4.1.11898.2.1.11.6.1 |
oriLinkTestDataRateTableIndexThis object is the second index to the Link Test Data Rate Counter
Table. The data rates negotiated by the access point and client
station will represent an index into this table. The data rates are
defined in units of 500 Kbps.ro Integer32 .1.3.6.1.4.1.11898.2.1.11.6.1.1 |
oriLinkTestDataRateTableRemoteCountThe total number of frames sent at the data rate value of the index
during the link test to the remote station or access point device.ro Counter32 .1.3.6.1.4.1.11898.2.1.11.6.1.2 |
oriLinkTestDataRateTableLocalCountThe total number of frames sent at the data rate value of the index
(oriLinkTestDataRateTableindex) during the link test to the client
station indenfied by the index (oriLinkTestTableIndex).ro Counter32 .1.3.6.1.4.1.11898.2.1.11.6.1.3 |
orinocoLinkInt OBJECT IDENTIFIER .1.3.6.1.4.1.11898.2.1.12 |
oriLinkIntStatusThis object is used to enable or disable the link integrity
functionality.rw Enumeration .1.3.6.1.4.1.11898.2.1.12.1 |
oriLinkIntPollIntervalThis object is used to set the poll interval (in milliseconds)
for the link integrity check. The valid values for this objects
are multiples of 500 milliseconds, a value of zero is not
supported.rw Integer32 .1.3.6.1.4.1.11898.2.1.12.2 |
oriLinkIntPollRetransmissionsThis object is used to set the number of retransmissions for
the link integrity check.rw Integer32 .1.3.6.1.4.1.11898.2.1.12.3 |
oriLinkIntTableThis table contains the target IP addresses in order to perform
the link integrity check. This table is limited to 5 entries. SEQUENCE OF OriLinkIntTableEntry .1.3.6.1.4.1.11898.2.1.12.4 |
oriLinkIntTableEntryThis object identifies the entry in the link integrity target
table. OriLinkIntTableEntry .1.3.6.1.4.1.11898.2.1.12.4.1 |
oriLinkIntTableIndexThis object is used as an index for the link integrity target
table.ro Integer32 .1.3.6.1.4.1.11898.2.1.12.4.1.1 |
oriLinkIntTableTargetIPAddressThis object represents the IP address of the target machine for
the link integrity check.rw IpAddress .1.3.6.1.4.1.11898.2.1.12.4.1.2 |
oriLinkIntTableCommentThis object is used as an optional comment associated to the
link integrity table entry.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.12.4.1.3 |
oriLinkIntTableEntryStatusThis object is used to enable, disable, or delete an
entry in the link integrity table.rw Enumeration .1.3.6.1.4.1.11898.2.1.12.4.1.4 |
orinocoUPSD OBJECT IDENTIFIER .1.3.6.1.4.1.11898.2.1.13 |
oriUPSDGPRIntervalThis object is used to set the interval of GPR message (in 5ms step),
0 = disable GPR.rw Integer32 .1.3.6.1.4.1.11898.2.1.13.1 |
oriUPSDMaxActiveSUThis object is used to set the maximum actived SU per AP.rw Integer32 .1.3.6.1.4.1.11898.2.1.13.2 |
oriUPSDE911ReservedThis object is used to set the bandwidth allocated for E911calls.rw Integer32 .1.3.6.1.4.1.11898.2.1.13.3 |
oriUPSDRoamingReservedThis object is used to set the bandwidth allocated for roaming SU.rw Integer32 .1.3.6.1.4.1.11898.2.1.13.4 |
orinocoQoS OBJECT IDENTIFIER .1.3.6.1.4.1.11898.2.1.14 |
oriQoSPolicyTableThis table is used to configure Quality of Service policies to be used
in the Access Point. SEQUENCE OF OriQoSPolicyTableEntry .1.3.6.1.4.1.11898.2.1.14.1 |
oriQoSPolicyTableEntryThis object represents entries in the QoS Policy Table. OriQoSPolicyTableEntry .1.3.6.1.4.1.11898.2.1.14.1.1 |
oriQoSPolicyTableIndexThis object is used as the primary index to the QoS Policy Table.ro Integer32 .1.3.6.1.4.1.11898.2.1.14.1.1.1 |
oriQoSPolicyTableSecIndexThis object is used as the secondary index to the QoS Policy Table.ro Integer32 .1.3.6.1.4.1.11898.2.1.14.1.1.2 |
oriQoSPolicyNameThis object is used to specify a name for the QoS Policy.rw DisplayString32 .1.3.6.1.4.1.11898.2.1.14.1.1.3 |
oriQoSPolicyTypeThis object is used to specify the QoS policy type.ro Enumeration .1.3.6.1.4.1.11898.2.1.14.1.1.4 |
oriQoSPolicyPriorityMappingThis object is used to configure the QoS priority mapping. The index
from either the QoS 802.1D to 802.1p mapping table or the index from
the 802.1D to IP DSCP mapping table should be specified depending on the
policy type. For Layer 2 polices, an index from the QoS 802.1D to
802.1p mapping table should be specified. For Layer 3 policies, an
index from the QoS 802.1D to IP DSCP mapping table should be specified.
If a spectralink policy is configured, then this object is not used.rw Integer32 .1.3.6.1.4.1.11898.2.1.14.1.1.5 |
oriQoSPolicyMarkingStatusThis object is used to enable or disable QoS markings.rw ObjStatus .1.3.6.1.4.1.11898.2.1.14.1.1.6 |
oriQoSPolicyTableRowStatusThe object is used to configure the QoS Policy Table row status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.14.1.1.7 |
oriQoSDot1DToDot1pMappingTableThis table is used to configure Quality of Service mappings between
802.1D and 802.1p priorities. SEQUENCE OF OriQoSDot1DToDot1pMappingTableEntry .1.3.6.1.4.1.11898.2.1.14.2 |
oriQoSDot1DToDot1pMappingTableEntryThis object represents entries in the QoS 802.1D to 802.1p Mapping
Table. OriQoSDot1DToDot1pMappingTableEntry .1.3.6.1.4.1.11898.2.1.14.2.1 |
oriQoSDot1DToDot1pMappingTableIndexThis object is used as the primary index to the QoS 802.1D to 802.1p
mapping table.ro Integer32 .1.3.6.1.4.1.11898.2.1.14.2.1.1 |
oriQoSDot1dPriorityThis object is used to specify the 802.1d priority and is used as
the secondary index to the 802.1D to 802.1p mapping table.ro Integer32 .1.3.6.1.4.1.11898.2.1.14.2.1.2 |
oriQoSDot1pPriorityThis object is used to specify the 802.1D priority to be mapped to a
802.1p priority.rw Integer32 .1.3.6.1.4.1.11898.2.1.14.2.1.3 |
oriQoSDot1DToDot1pMappingTableRowStatusThe object is used to configure the QoS 802.1D to 802.1p mapping table
row status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.14.2.1.4 |
oriQoSDot1DToIPDSCPMappingTableThis table is used to configure Quality of Service mappings between
802.1D to IP DSCP priorities. SEQUENCE OF OriQoSDot1DToIPDSCPMappingTableEntry .1.3.6.1.4.1.11898.2.1.14.3 |
oriQoSDot1DToIPDSCPMappingTableEntryThis object represents entries in the 802.1D to IP DSCP Mapping
Table. OriQoSDot1DToIPDSCPMappingTableEntry .1.3.6.1.4.1.11898.2.1.14.3.1 |
oriQoSDot1DToIPDSCPMappingTableIndexThis object is used as the primary index to the 802.1D to IP DSCP
mapping table.ro Integer32 .1.3.6.1.4.1.11898.2.1.14.3.1.1 |
oriQoSDot1DToIPDSCPPriorityThis object is used to specify the 802.1D priority and is used as
the secondary index to the 802.1D to IP DSCP mapping table.ro Integer32 .1.3.6.1.4.1.11898.2.1.14.3.1.2 |
oriQoSIPDSCPLowerLimitThis object is used to specify IP DSCP lower limit.rw Integer32 .1.3.6.1.4.1.11898.2.1.14.3.1.3 |
oriQoSIPDSCPUpperLimitThis object is used to specify IP DSCP upper limit.rw Integer32 .1.3.6.1.4.1.11898.2.1.14.3.1.4 |
oriQoSDot1DToIPDSCPMappingTableRowStatusThe object is used to configure the 802.1D to IP DSCP mapping
table row status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.14.3.1.5 |
orinocoDHCP OBJECT IDENTIFIER .1.3.6.1.4.1.11898.2.1.15 |
orinocoDHCPServer OBJECT IDENTIFIER .1.3.6.1.4.1.11898.2.1.15.1 |
oriDHCPServerStatusThis object indicates if the DHCP server is enabled or disabled
in the device.rw Enumeration .1.3.6.1.4.1.11898.2.1.15.1.1 |
oriDHCPServerIPPoolTableThis table contains the pools of IP Addresses that the DHCP server
will assign to the DHCP clients. This table is limited to
20. SEQUENCE OF OriDHCPServerIPPoolTableEntry .1.3.6.1.4.1.11898.2.1.15.1.2 |
oriDHCPServerIPPoolTableEntryThis object represents entries in the DHCP IP Address Pool Table. OriDHCPServerIPPoolTableEntry .1.3.6.1.4.1.11898.2.1.15.1.2.1 |
oriDHCPServerIPPoolTableIndexThis object is used as the index for the IP Address Pool table.ro Integer32 .1.3.6.1.4.1.11898.2.1.15.1.2.1.1 |
oriDHCPServerIPPoolTableStartIPAddressThis object represents the start IP address for this DHCP IP
Address IP Pool Table entry.rw IpAddress .1.3.6.1.4.1.11898.2.1.15.1.2.1.2 |
oriDHCPServerIPPoolTableEndIPAddressThis object represents the end IP address for this DHCP IP
Address IP Pool Table entry.rw IpAddress .1.3.6.1.4.1.11898.2.1.15.1.2.1.3 |
oriDHCPServerIPPoolTableWidthThis object represents the width or number of IP Address in the
DHCP IP Address Pool table entry.rw Integer32 .1.3.6.1.4.1.11898.2.1.15.1.2.1.4 |
oriDHCPServerIPPoolTableDefaultLeaseTimeThis object represents the default lease time, in seconds, for
the IP address assigned by the DHCP server to the DHCP client.rw Integer32 .1.3.6.1.4.1.11898.2.1.15.1.2.1.5 |
oriDHCPServerIPPoolTableMaximumLeaseTimeThis object represents the maximum lease time in seconds for
the IP address assigned by the DHCP server to the DHCP client.rw Integer32 .1.3.6.1.4.1.11898.2.1.15.1.2.1.6 |
oriDHCPServerIPPoolTableCommentThis object represents an optional comment for this table entry.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.15.1.2.1.7 |
oriDHCPServerIPPoolTableEntryStatusThe object indicates the status of the DHCP IP Address Pool
Table entry.rw Enumeration .1.3.6.1.4.1.11898.2.1.15.1.2.1.8 |
oriDHCPServerDefaultGatewayIPAddressThis object represents the IP Address of the gateway or router
that the DHCP Server will assign to the DHCP client.rw IpAddress .1.3.6.1.4.1.11898.2.1.15.1.3 |
oriDHCPServerSubnetMaskThis object represents the subnet mask to be provided to
DHCP clients. This object is the same as the subnet mask for
the device.ro IpAddress .1.3.6.1.4.1.11898.2.1.15.1.4 |
oriDHCPServerNumIPPoolTableEntriesThis object represents the number of entries in the DHCP IP
Address Pool Table.ro Integer32 .1.3.6.1.4.1.11898.2.1.15.1.5 |
oriDHCPServerPrimaryDNSIPAddressThis object represents the primary DNS Server IP Address to be
assinged to a DHCP Client.rw IpAddress .1.3.6.1.4.1.11898.2.1.15.1.6 |
oriDHCPServerSecondaryDNSIPAddressThis object represents the secondary DNS Server IP Address to be
assinged to a DHCP Client.rw IpAddress .1.3.6.1.4.1.11898.2.1.15.1.7 |
orinocoDHCPClient OBJECT IDENTIFIER .1.3.6.1.4.1.11898.2.1.15.2 |
oriDHCPClientIDThis object represents the DHCP client ID.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.15.2.1 |
oriDHCPClientInterfaceBitmaskThis object indicates to which interface a DHCP Request
in sent when the unit is in routing moderw InterfaceBitmask .1.3.6.1.4.1.11898.2.1.15.2.2 |
orinocoDHCPRelay OBJECT IDENTIFIER .1.3.6.1.4.1.11898.2.1.15.3 |
oriDHCPRelayStatusThis object is used to enable and disable the DHCP Relay
functionality.rw Enumeration .1.3.6.1.4.1.11898.2.1.15.3.1 |
oriDHCPRelayDHCPServerTableThis table contains a list of DHCP servers to which the
DHCP Agent will communicate with. SEQUENCE OF OriDHCPRelayDHCPServerTableEntry .1.3.6.1.4.1.11898.2.1.15.3.2 |
oriDHCPRelayDHCPServerTableEntryThis object represents and entry in the DHCP Server table. OriDHCPRelayDHCPServerTableEntry .1.3.6.1.4.1.11898.2.1.15.3.2.1 |
oriDHCPRelayDHCPServerTableIndexThis object is used as the index to this table. This table is
limited to 10 entries.ro Integer32 .1.3.6.1.4.1.11898.2.1.15.3.2.1.1 |
oriDHCPRelayDHCPServerTableIpAddressThis object represents the IP address of the DHCP server
that shall receive DHCP requests from the device.rw IpAddress .1.3.6.1.4.1.11898.2.1.15.3.2.1.2 |
oriDHCPRelayDHCPServerTableCommentThis object represents an optional comment in order to provide
additional information or a unique identifier for the DHCP server
(for example the server system name).rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.15.3.2.1.3 |
oriDHCPRelayDHCPServerTableEntryStatusThis object is used to enable, disable, delete or create an
entry in the DHCP Server Table.rw Enumeration .1.3.6.1.4.1.11898.2.1.15.3.2.1.4 |
orinocoHTTP OBJECT IDENTIFIER .1.3.6.1.4.1.11898.2.1.16 |
oriHTTPInterfaceBitmaskThis object is used to control interface access for HTTP based
management.rw InterfaceBitmask .1.3.6.1.4.1.11898.2.1.16.1 |
oriHTTPPasswordThis object represents the login password in order to manage
the device via a standard web browser. This object should be
treated as write-only and returned as asterisks.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.16.2 |
oriHTTPPortThis object represents the TCP/IP port by which the HTTP server
will be accessible.rw Integer32 .1.3.6.1.4.1.11898.2.1.16.3 |
oriHTTPWebSitenameTableThis table is used to store the different website interfaces
stored in the device. Different interfaces can be used to
support multiple languages, user levels (novice, expert), etc. SEQUENCE OF OriHTTPWebSitenameTableEntry .1.3.6.1.4.1.11898.2.1.16.4 |
oriHTTPWebSitenameTableEntryThis object represents an entry is the HTTP website name table. OriHTTPWebSitenameTableEntry .1.3.6.1.4.1.11898.2.1.16.4.1 |
oriHTTPWebSitenameTableIndexThis objects represents the index to the website interface
table.ro Integer32 .1.3.6.1.4.1.11898.2.1.16.4.1.1 |
oriHTTPWebSiteFilenameThis object represents the filename under which the website
interface is stored in the device.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.16.4.1.2 |
oriHTTPWebSiteLanguageThis object represents the language of the website interface.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.16.4.1.3 |
oriHTTPWebSiteDescriptionThis object provides a description for the website interface.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.16.4.1.4 |
oriHTTPWebSitenameTableStatusThis object is used to enable, disable, or delete a website
interface file.rw Enumeration .1.3.6.1.4.1.11898.2.1.16.4.1.5 |
oriHTTPRefreshDelayThis object is used for the automatic refresh delay for the
website pages.rw Integer32 .1.3.6.1.4.1.11898.2.1.16.5 |
oriHTTPHelpInformationLinkThis object is used to configure the link in the web
interface for where help information can be retrieved.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.16.6 |
oriHTTPSSLStatusThis object is used to enable or disable SSL on HTTP based
management.rw ObjStatus .1.3.6.1.4.1.11898.2.1.16.7 |
oriHTTPSSLPassphraseThis object is used to specify the SSL certificate
passphrase on HTTP based management. This object should
be treated as write-only and returned as asterisks.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.16.8 |
oriHTTPSetupWizardStatusThis object is used to enable or disable the HTT setup wizard. The
user can manually disable this functionality or when the setup wizard
completes it process successfully it sets this object to disable.rw Enumeration .1.3.6.1.4.1.11898.2.1.16.9 |
oriHTTPRADIUSAccessControlThis object is used to enable/disable RADIUS Based Authentication
for HTTP based management.rw ObjStatus .1.3.6.1.4.1.11898.2.1.16.10 |
orinocoWDS OBJECT IDENTIFIER .1.3.6.1.4.1.11898.2.1.17 |
oriWDSSetupTableThis table is used in to configure the WDS feature in the device. SEQUENCE OF OriWDSSetupTableEntry .1.3.6.1.4.1.11898.2.1.17.1 |
oriWDSSetupTableEntryThis object represents an entry in the WDS table. Note this
table is index by ifIndex and WDS table index. OriWDSSetupTableEntry .1.3.6.1.4.1.11898.2.1.17.1.1 |
oriWDSSetupTablePortIndexThis object represents the WDS port number.ro Integer32 .1.3.6.1.4.1.11898.2.1.17.1.1.1 |
oriWDSSetupTableEntryStatusThis object is used to enable or disable a WDS table entry (link).rw Enumeration .1.3.6.1.4.1.11898.2.1.17.1.1.2 |
oriWDSSetupTablePartnerMACAddressThis object represents the partner MAC address for a WDS table
entry (link).rw PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.17.1.1.3 |
oriWDSSecurityTableThis table is used in to configure the WDS security modes for all
entries in the WDS table. SEQUENCE OF OriWDSSecurityTableEntry .1.3.6.1.4.1.11898.2.1.17.2 |
oriWDSSecurityTableEntryThis object represents an entry in the WDS security table. Note this
table is index by ifIndex since the security configuration will apply
for all the WDS links per interface. OriWDSSecurityTableEntry .1.3.6.1.4.1.11898.2.1.17.2.1 |
oriWDSSecurityTableSecurityModeThis object is used to configure the WDS security mode. Currently
the supported WDS security modes are none and wep.rw Enumeration .1.3.6.1.4.1.11898.2.1.17.2.1.1 |
oriWDSSecurityTableEncryptionKey0This object represents the WDS Encryption Key 0. When the WDS
security mode is configured to wep, this object must be configured to
a valid value. This object should be treated as write-only and
returned as asterisks.rw WEPKeyType .1.3.6.1.4.1.11898.2.1.17.2.1.2 |
orinocoTrap OBJECT IDENTIFIER .1.3.6.1.4.1.11898.2.1.18 |
oriTrapVariable OBJECT IDENTIFIER .1.3.6.1.4.1.11898.2.1.18.1 |
oriGenericTrapVariableThis object is used to provide additional information on traps.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.18.1.1 |
oriTrapVarMACAddressThis object is used to store the MAC address of the device
that has sent a trap.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.18.1.2 |
oriTrapVarTFTPIPAddressThis object is used to store the IP Address of the TFTP server.ro IpAddress .1.3.6.1.4.1.11898.2.1.18.1.3 |
oriTrapVarTFTPFilenameThis object is used to store the name of the file on which the
TFTP operation has occurred.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.18.1.4 |
oriTrapVarTFTPOperationThis object is used to store the TFTP operation that failed,
either download or upload.ro Enumeration .1.3.6.1.4.1.11898.2.1.18.1.5 |
oriTrapVarUnauthorizedManagerIPaddressThis object is used to store the IP address of the unauthorized
manager that has attempted to manage the device.ro IpAddress .1.3.6.1.4.1.11898.2.1.18.1.6 |
oriTrapVarFailedAuthenticationTypeThis trap variable is used to specify the client authentication
method/type that failed. The authentication methods/types are
dependant on the device and can range from the following:
- MAC Access Control Table
- RADIUS MAC Authentication
- 802.1x Authentication specifying the EAP-Type
- WORP Mutual Authentication
- SSID Authorization Failure specifying the SSID
- VLAN ID Authorization Failure specifying the VLAN IDro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.18.1.7 |
oriTrapVarUnAuthorizedManagerCountThis object represents a counter for the number of unauthorized
SNMP managers that have attempted to modify and/or view the devices
setup. When this number is incremented a trap should be sent out
notifying the trap host(s) that an unauthorized station has
attempted to configure or monitor the device the count should also
be sent out in the trap message.ro Counter32 .1.3.6.1.4.1.11898.2.1.18.1.8 |
oriTrapVarTaskSuspendedThis object is used to inform what task has been suspended
on the device.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.18.1.9 |
oriConfigurationTrapsStatusThis object is used to enable or disable the configuration
related traps.rw Enumeration .1.3.6.1.4.1.11898.2.1.18.1.10 |
oriSecurityTrapsStatusThis object is used to enable or disable the security
related traps.rw Enumeration .1.3.6.1.4.1.11898.2.1.18.1.11 |
oriWirelessIfTrapsStatusThis object is used to enable or disable the wireless
interface/card related traps.rw Enumeration .1.3.6.1.4.1.11898.2.1.18.1.12 |
oriOperationalTrapsStatusThis object is used to enable or disable the operational
related traps.rw Enumeration .1.3.6.1.4.1.11898.2.1.18.1.13 |
oriFlashMemoryTrapsStatusThis object is used to enable or disable the flash memory
related traps.rw Enumeration .1.3.6.1.4.1.11898.2.1.18.1.14 |
oriTFTPTrapsStatusThis object is used to enable or disable the TFTP
related traps.rw Enumeration .1.3.6.1.4.1.11898.2.1.18.1.15 |
oriTrapsImageStatusThis object is used to enable or disable the Image
related traps.rw Enumeration .1.3.6.1.4.1.11898.2.1.18.1.16 |
oriTrapVarUnauthorizedClientMACAddressThis object is used to store the MAC Address of an
unauthorized client station.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.18.1.17 |
oriTrapVarWirelessCardThis object is used to determine on which Wireless Card,
PC Card A or PC Card B, a wireless TRAP has occured on.ro Enumeration .1.3.6.1.4.1.11898.2.1.18.1.18 |
oriADSLIfTrapsStatusThis object is used to enable or disable the ADSL
interface related traps.rw Enumeration .1.3.6.1.4.1.11898.2.1.18.1.19 |
oriWORPTrapsStatusThis object is used to enable or disable the WORP related traps.rw Enumeration .1.3.6.1.4.1.11898.2.1.18.1.20 |
oriTrapVarInterfaceThis object is used to store the interface number.ro Integer32 .1.3.6.1.4.1.11898.2.1.18.1.21 |
oriTrapVarBatchCLIFilenameThis object is used to store filename used for Batch CLI execution.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.18.1.22 |
oriTrapVarBatchCLIMessageThis object is used to store message from Batch CLI execution.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.18.1.23 |
oriTrapVarBatchCLILineNumberThis object is used to store line number of command executed in Batch
CLI.ro Integer32 .1.3.6.1.4.1.11898.2.1.18.1.24 |
oriTrapVarDHCPServerIPAddressThis object is used to store the DHCP Server IP Address from which
the access point has received an IP address as a result of the a DHCP
client request.ro IpAddress .1.3.6.1.4.1.11898.2.1.18.1.25 |
oriTrapVarIPAddressThis object is a trap variable/object to store an IP address.ro IpAddress .1.3.6.1.4.1.11898.2.1.18.1.26 |
oriTrapVarSubnetMaskThis object is a trap variable/object to store a subnet mask.ro IpAddress .1.3.6.1.4.1.11898.2.1.18.1.27 |
oriTrapVarDefaultRouterIPAddressThis object is a trap variable/object to store a default router
or gateway IP address.ro IpAddress .1.3.6.1.4.1.11898.2.1.18.1.28 |
oriConfigurationTrapsThis is the configuration related trap/notification group. OBJECT IDENTIFIER .1.3.6.1.4.1.11898.2.1.18.2 |
oriTrapDNSIPNotConfiguredThis traps is generated when the DNS IP Address has not been
configured.
Trap Severity Level: Major. NOTIFICATION-TYPE .1.3.6.1.4.1.11898.2.1.18.2.0.3 |
oriTrapRADIUSAuthenticationNotConfiguredThis trap is generated when the RADIUS authentication information
has not been configured.
Trap Severity Level: Major. NOTIFICATION-TYPE .1.3.6.1.4.1.11898.2.1.18.2.0.5 |
oriTrapRADIUSAccountingNotConfiguredThis trap is generated when the RADIUS accounting information
has not been configured.
Trap Severity Level: Major. NOTIFICATION-TYPE .1.3.6.1.4.1.11898.2.1.18.2.0.6 |
oriTrapDuplicateIPAddressEncounteredThis trap is generated when the device has encountered another
network device with he same IP Address.
Trap Severity Level: Major. NOTIFICATION-TYPE .1.3.6.1.4.1.11898.2.1.18.2.0.7 |
oriTrapDHCPRelayServerTableNotConfiguredThis trap is generated when the DHCP relay agent server table is
empty or not configured.
Trap Severity Level: Major. NOTIFICATION-TYPE .1.3.6.1.4.1.11898.2.1.18.2.0.8 |
oriTrapWORPIfNetworkSecretNotConfiguredThis trap is generated when the system network authentication
shared secret is not configured.
Trap Severity Level: Major. NOTIFICATION-TYPE .1.3.6.1.4.1.11898.2.1.18.2.0.9 |
oriTrapVLANIDInvalidConfigurationThis trap is generated when a VLAN ID configuration is invalid.
Trap Severity Level: Major. NOTIFICATION-TYPE .1.3.6.1.4.1.11898.2.1.18.2.0.10 |
oriTrapAutoConfigFailureThis trap is generated when the auto configuration failed.
Trap Severity Level: Minor. NOTIFICATION-TYPE .1.3.6.1.4.1.11898.2.1.18.2.0.11 |
oriTrapBatchExecFailureThis trap is generated when the CLI Batch execution fails for the
following reasons.
- Illegal Command is parsed in the CLI Batch File.
- Execution error is encountered while executing CLI Batch file.
- Bigger File Size than 100 Kbytes
Trap Severity Level: Minor. NOTIFICATION-TYPE .1.3.6.1.4.1.11898.2.1.18.2.0.12 |
oriTrapBatchFileExecStartThis trap is generated when the CLI Batch execution begins after
file is uploaded.
Trap Severity Level: Minor. NOTIFICATION-TYPE .1.3.6.1.4.1.11898.2.1.18.2.0.13 |
oriTrapBatchFileExecEndThis trap is generated when the execution of CLI Batch File Ends.
Trap Severity Level: Minor. NOTIFICATION-TYPE .1.3.6.1.4.1.11898.2.1.18.2.0.14 |
oriSecurityTrapsThis is the security related trap/notification group. OBJECT IDENTIFIER .1.3.6.1.4.1.11898.2.1.18.3 |
oriTrapInvalidEncryptionKeyThis trap is generated when an invalid encryption key has been
detected.
Trap Severity Level: Critical. NOTIFICATION-TYPE .1.3.6.1.4.1.11898.2.1.18.3.0.1 |
oriTrapAuthenticationFailureThis trap is generated when a client authentication failure
has occurred. The authentication failures can range from:
- MAC Access Control Table
- RADIUS MAC Authentication
- 802.1x Authentication specifying the EAP-Type
- WORP Mutual Authentication
- SSID Authorization Failure specifying the SSID
- VLAN ID Authorization Failure specifying the VLAN ID
Trap Severity Level: Major. NOTIFICATION-TYPE .1.3.6.1.4.1.11898.2.1.18.3.0.2 |
oriTrapUnauthorizedManagerDetectedThis trap is generated when an unauthorized manager has
attempted to view and/or modify parameters.
Trap Severity Level: Major. NOTIFICATION-TYPE .1.3.6.1.4.1.11898.2.1.18.3.0.3 |
oriTrapRADScanCompleteThis trap is generated when an a RAD scan is successfully completed.
Trap Severity Level: Informational. NOTIFICATION-TYPE .1.3.6.1.4.1.11898.2.1.18.3.0.4 |
oriTrapRADScanResultsThis trap is generated in order to provide information on the RAD
Scan results.
Trap Severity Level: Informational. NOTIFICATION-TYPE .1.3.6.1.4.1.11898.2.1.18.3.0.5 |
oriTrapRogueScanStationDetectedThis trap is generated when a rogue station is detected.
Trap Severity Level: Informational. NOTIFICATION-TYPE .1.3.6.1.4.1.11898.2.1.18.3.0.6 |
oriTrapRogueScanCycleCompleteThis trap is generated when an a rogue scan is successfully completed.
Trap Severity Level: Informational. NOTIFICATION-TYPE .1.3.6.1.4.1.11898.2.1.18.3.0.7 |
oriWirelessIfTrapsThis is the wireless interface or wireless card related
trap/notification group. OBJECT IDENTIFIER .1.3.6.1.4.1.11898.2.1.18.4 |
oriTrapWLCNotPresentThis trap is generated when a wireless interface/card is not
present in the device.
Trap Severity Level: Informational. NOTIFICATION-TYPE .1.3.6.1.4.1.11898.2.1.18.4.0.1 |
oriTrapWLCFailureThis trap is generated when a general failure has occured with
the wireless interface/card.
Trap Severity Level: Critical. NOTIFICATION-TYPE .1.3.6.1.4.1.11898.2.1.18.4.0.2 |
oriTrapWLCRemovalThis trap is generated when the wireless interface/card has been
removed from the device.
Trap Severity Level: Critical. NOTIFICATION-TYPE .1.3.6.1.4.1.11898.2.1.18.4.0.3 |
oriTrapWLCIncompatibleFirmwareThis trap is generated when the firmware of the wireless
interface/card is incompatible.
Trap Severity Level: Critical. NOTIFICATION-TYPE .1.3.6.1.4.1.11898.2.1.18.4.0.4 |
oriTrapWLCVoltageDiscrepancyThis trap is generated when a non 5 volt card or 3.3 volt
wireless interface/card is inserted in the device.
Trap Severity Level: Critical. NOTIFICATION-TYPE .1.3.6.1.4.1.11898.2.1.18.4.0.5 |
oriTrapWLCIncompatibleVendorThis trap is generated when an incompatible wireless vendor card
is inserted or present in the device.
Trap Severity Level: Critical. NOTIFICATION-TYPE .1.3.6.1.4.1.11898.2.1.18.4.0.6 |
oriTrapWLCFirmwareDownloadFailureThis trap is generated when a failure occurs during the firmware
download process of the wireless interface/card.
Trap Severity Level: Critical. NOTIFICATION-TYPE .1.3.6.1.4.1.11898.2.1.18.4.0.7 |
oriTrapWLCFirmwareFailureThis trap is generated when a failure occurs in the wireless
interface/card firmware.
Trap Severity Level: Critical. NOTIFICATION-TYPE .1.3.6.1.4.1.11898.2.1.18.4.0.8 |
oriTrapWLCRadarInterferenceDetectedThis trap is generated when radar interference is detected on the
channel being used by the wireless interface. The generic trap
varible provides information on the channel where interference
was detected.
Trap Severity Level: Major. NOTIFICATION-TYPE .1.3.6.1.4.1.11898.2.1.18.4.0.9 |
oriOperationalTrapsThis is the operational related trap group group. OBJECT IDENTIFIER .1.3.6.1.4.1.11898.2.1.18.5 |
oriTrapUnrecoverableSoftwareErrorDetectedThis trap is generated when an unrecoverable software error has
been detected. This trap can signify that a problem/error has occurred
with one or more software modules. This error would cause the software
watch dog timer to expire which would then cause the device to reboot.
Trap Severity Level: Critical. NOTIFICATION-TYPE .1.3.6.1.4.1.11898.2.1.18.5.0.1 |
oriTrapRADIUSServerNotRespondingThis trap is generated when no response is received from the
RADIUS server(s) for authentication requests sent from the RADIUS
client in the device.
Trap Severity Level: Major. NOTIFICATION-TYPE .1.3.6.1.4.1.11898.2.1.18.5.0.2 |
oriTrapModuleNotInitializedThis trap is generated when a certain software or hardware module
has not been initialized or failed to be initialized.
Trap Severity Level: Major. NOTIFICATION-TYPE .1.3.6.1.4.1.11898.2.1.18.5.0.3 |
oriTrapDeviceRebootingThis trap is generated when the device has received a request
to be rebooted.
Trap Severity Level: Informational. NOTIFICATION-TYPE .1.3.6.1.4.1.11898.2.1.18.5.0.5 |
oriTrapTaskSuspendedThis trap is generated when a task in the device has suspended.
Trap Severity Level: Critical. NOTIFICATION-TYPE .1.3.6.1.4.1.11898.2.1.18.5.0.6 |
oriTrapBootPFailedThis trap is generated when a response to the BootP request is
not received, hence the access point device is not dynamically
assigned an IP Address.
Trap Severity Level: Major. NOTIFICATION-TYPE .1.3.6.1.4.1.11898.2.1.18.5.0.7 |
oriTrapDHCPFailedThis trap is generated when a response to the DHCP client request
is not received, hence the access point device is not dynamically
assigned an IP Address.
Trap Severity Level: Major. NOTIFICATION-TYPE .1.3.6.1.4.1.11898.2.1.18.5.0.8 |
oriTrapDNSClientLookupFailureThis trap is generated when the DNS client attempts to resolve a
specified hostname (DNS lookup) and a failure occurs. This could be
the result of the DNS server being unreachable or returning an error
for the hostname lookup. This trap specified the hostname that was
being resolved.
Trap Severity Level: Major. NOTIFICATION-TYPE .1.3.6.1.4.1.11898.2.1.18.5.0.9 |
oriTrapSNTPFailureThis trap is generated when SNTP service is enabled and no response
is received from the configured SNTP servers.
Trap Severity Level: Major. NOTIFICATION-TYPE .1.3.6.1.4.1.11898.2.1.18.5.0.10 |
oriTrapMaximumNumberOfSubscribersReachedThis trap is generated when maximum number of suscribers has been
reached.
Trap Severity Level: Major. NOTIFICATION-TYPE .1.3.6.1.4.1.11898.2.1.18.5.0.11 |
oriTrapSSLInitializationFailureThis trap is generated when the SSL initialization fails.
Trap Severity Level: Major. NOTIFICATION-TYPE .1.3.6.1.4.1.11898.2.1.18.5.0.12 |
oriTrapWirelessServiceShutdownThis trap is generated when the Wireless Service Shutdown object is
configured to down; in other words the wireless interface has shutdown
services for wireless clients.
Trap Severity Level: Informational. NOTIFICATION-TYPE .1.3.6.1.4.1.11898.2.1.18.5.0.13 |
oriTrapWirelessServiceResumedThis trap is generated when the Wireless Service Shutdown object is
configured to up; in other words the wireless interface has resumed
service and is ready for wireless client connections.
Trap Severity Level: Informational. NOTIFICATION-TYPE .1.3.6.1.4.1.11898.2.1.18.5.0.14 |
oriTrapSSHInitializationStatusThis trap is generated to provide information on SSH initialization.
Trap Severity Level: Major. NOTIFICATION-TYPE .1.3.6.1.4.1.11898.2.1.18.5.0.15 |
oriTrapVLANIDUserAssignmentThis trap is generated when a user gets assigned a VLAN ID from the
RADIUS server.
Trap Severity Level: Informational. NOTIFICATION-TYPE .1.3.6.1.4.1.11898.2.1.18.5.0.16 |
oriTrapDHCPLeaseRenewalThis trap is generated when the access point does a DHCP renewal
request and receives new information from the DHCP server.
The variables/objects bound to this trap will provide information on
the DHCP server IP address that replied to the DHCP client request, and
the IP address, subnet mask, and gateway IP address returned from the
DHCP server.
Trap Severity Level: Informational. NOTIFICATION-TYPE .1.3.6.1.4.1.11898.2.1.18.5.0.17 |
oriTrapTemperatureAlertThis trap is generated when the temperature crosses the limit of -30
to 60 degrees celsius.
Trap Severity Level: Major. NOTIFICATION-TYPE .1.3.6.1.4.1.11898.2.1.18.5.0.18 |
oriFlashTrapsThis is the flash memory related trap group. OBJECT IDENTIFIER .1.3.6.1.4.1.11898.2.1.18.6 |
oriTrapFlashMemoryEmptyThis trap is generated when there is no data present in flash
memory - either on the flash card or the onboard flash memory.
Trap Severity Level: Informational. NOTIFICATION-TYPE .1.3.6.1.4.1.11898.2.1.18.6.0.1 |
oriTrapFlashMemoryCorruptedThis trap is generated when the data content of flash memory is
corrupted.
Trap Severity Level: Critical. NOTIFICATION-TYPE .1.3.6.1.4.1.11898.2.1.18.6.0.2 |
oriTrapFlashMemoryRestoringLastKnownGoodConfigurationThis trap is generated when the current/original configuration data
file is found to be corrupted, therefore the device will load the last
known good configuration file.
Trap Severity Level: Informational. NOTIFICATION-TYPE .1.3.6.1.4.1.11898.2.1.18.6.0.3 |
oriTFTPTrapsThis is the TFTP related trap group. OBJECT IDENTIFIER .1.3.6.1.4.1.11898.2.1.18.7 |
oriTrapTFTPFailedOperationThis trap is generated when a failure has occurred with the TFTP
operation.
Trap Severity Level: Major. NOTIFICATION-TYPE .1.3.6.1.4.1.11898.2.1.18.7.0.1 |
oriTrapTFTPOperationInitiatedThis trap is generated when a TFTP operation has been initiated.
Trap Severity Level: Informational. NOTIFICATION-TYPE .1.3.6.1.4.1.11898.2.1.18.7.0.2 |
oriTrapTFTPOperationCompletedThis trap is generated when a TFTP operation has been completed.
Trap Severity Level: Informational. NOTIFICATION-TYPE .1.3.6.1.4.1.11898.2.1.18.7.0.3 |
oriMiscTrapsThis is the miscellaneous trap group. OBJECT IDENTIFIER .1.3.6.1.4.1.11898.2.1.18.8 |
oriImageTrapsThis is the image related trap group. OBJECT IDENTIFIER .1.3.6.1.4.1.11898.2.1.18.9 |
oriTrapZeroSizeImageThis trap is generated when a zero size image is loaded on the
device.
Trap Severity Level: Major. NOTIFICATION-TYPE .1.3.6.1.4.1.11898.2.1.18.9.0.1 |
oriTrapInvalidImageThis trap is generated when an invalid image is loaded on the
device.
Trap Severity Level: Major. NOTIFICATION-TYPE .1.3.6.1.4.1.11898.2.1.18.9.0.2 |
oriTrapImageTooLargeThis trap is generated when the image loaded on the device
exceeds the size limitation of flash.
Trap Severity Level: Major. NOTIFICATION-TYPE .1.3.6.1.4.1.11898.2.1.18.9.0.3 |
oriTrapIncompatibleImageThis trap is generated when an incompatible image is loaded on
the device.
Trap Severity Level: Major. NOTIFICATION-TYPE .1.3.6.1.4.1.11898.2.1.18.9.0.4 |
oriTrapInvalidImageDigitalSignatureThis trap is generated when an image with an invalid Digital
Signature is loaded in the device.
Trap Severity Level: Major. NOTIFICATION-TYPE .1.3.6.1.4.1.11898.2.1.18.9.0.5 |
oriWORPTrapsThis is the WORP related trap group. OBJECT IDENTIFIER .1.3.6.1.4.1.11898.2.1.18.11 |
oriWORPStationRegisterThis trap is generated when a WORP satellite has registered on
and interface of a base; a satellite will not generate this trap,
but use oriWORPLinkUp instead. For the station indicated, the
oriStationStatTableOperStatus will be up.
Trap Severity Level: Informational. NOTIFICATION-TYPE .1.3.6.1.4.1.11898.2.1.18.11.0.1 |
oriWORPStationDeRegisterThis trap is generated when a WORP satellite has been deleted
from an interface of a base; a satellite will not generate this
trap, but use oriWORPLinkDown instead. For the station indicated,
the oriStationStatTableOperStatus will be down.
Trap Severity Level: Informational. NOTIFICATION-TYPE .1.3.6.1.4.1.11898.2.1.18.11.0.2 |
oriSysFeatureTrapsThis is the System Feature based License related trap group. OBJECT IDENTIFIER .1.3.6.1.4.1.11898.2.1.18.12 |
oriTrapIncompatibleLicenseFileThis trap is generated when a license file in the device's flash
memory is not compatible with the current bootloader.
Trap Severity Level: Major. NOTIFICATION-TYPE .1.3.6.1.4.1.11898.2.1.18.12.0.1 |
oriTrapFeatureNotSupportedThis trap is generated when a feature present in the license
codes is not supported by the current embedded software image.
A newer embedded software image could support the feature or
there are more license that needed.
Trap Severity Level: Informational. NOTIFICATION-TYPE .1.3.6.1.4.1.11898.2.1.18.12.0.2 |
oriTrapZeroLicenseFilesThis trap is generated when a single license file is not present
in flash. This causes the device to operate in default mode
with very limited features enabled.
Trap Severity Level: Critical. NOTIFICATION-TYPE .1.3.6.1.4.1.11898.2.1.18.12.0.3 |
oriTrapInvalidLicenseFileThis trap is generated when a license file in the device's flash
memory has an invalid signature and will be ignored.
Trap Severity Level: Minor. NOTIFICATION-TYPE .1.3.6.1.4.1.11898.2.1.18.12.0.4 |
oriTrapUselessLicenseThis trap is generated when a license code file does not contain
any valid feature code. The probably reason for this is that
after verification, not any of the features was meant for this
units MAC address.
Trap Severity Level: Informational. NOTIFICATION-TYPE .1.3.6.1.4.1.11898.2.1.18.12.0.5 |
orinocoIPARP OBJECT IDENTIFIER .1.3.6.1.4.1.11898.2.1.19 |
oriProxyARPStatusThis object is used to enable/disable the Proxy ARP functionality
in the device.rw Enumeration .1.3.6.1.4.1.11898.2.1.19.1 |
oriIPARPFilteringStatusThis object is used to enable/disable the IP/ARP functionality
in the device.rw Enumeration .1.3.6.1.4.1.11898.2.1.19.2 |
oriIPARPFilteringIPAddressThis object is used to specify the IP/ARP Filtering address
in the device.rw IpAddress .1.3.6.1.4.1.11898.2.1.19.3 |
oriIPARPFilteringSubnetMaskThis object is used to specify the IP/ARP Subnet Mask
in the device.rw IpAddress .1.3.6.1.4.1.11898.2.1.19.4 |
orinocoSpanningTree OBJECT IDENTIFIER .1.3.6.1.4.1.11898.2.1.20 |
oriSpanningTreeStatusThis object is used to enable/disable the spanning tree protocol
in the device.rw Enumeration .1.3.6.1.4.1.11898.2.1.20.1 |
orinocoSecurity OBJECT IDENTIFIER .1.3.6.1.4.1.11898.2.1.21 |
oriSecurityConfigurationThis object represents the supported security configuration options.
This object has been deprecated.rwdeprecated Enumeration .1.3.6.1.4.1.11898.2.1.21.1 |
oriSecurityEncryptionKeyLengthTableThis table is used to specify the encryption key length for
the wireless interface(s). This table has been deprecated.deprecated SEQUENCE OF OriSecurityEncryptionKeyLengthTableEntry .1.3.6.1.4.1.11898.2.1.21.2 |
oriSecurityEncryptionKeyLengthTableEntryThis object represents an entry in the encryption key
length table. This object has been deprecated.deprecated OriSecurityEncryptionKeyLengthTableEntry .1.3.6.1.4.1.11898.2.1.21.2.1 |
oriSecurityEncryptionKeyLengthThis object represents the encryption key length, the supported
key lengths are 64 bits (40 + 24 for IV), and 128 bits
(104 + 24 for IV). This object has been deprecated.rwdeprecated Enumeration .1.3.6.1.4.1.11898.2.1.21.2.1.1 |
oriSecurityRekeyingIntervalThis object represents the encryption rekeying interval in seconds.
This object has been deprecated.rwdeprecated Integer32 .1.3.6.1.4.1.11898.2.1.21.3 |
orinocoRAD OBJECT IDENTIFIER .1.3.6.1.4.1.11898.2.1.21.4 |
oriRADStatusThis object allows to enable or disable the RAD service in the
device.rw ObjStatus .1.3.6.1.4.1.11898.2.1.21.4.1 |
oriRADIntervalThis object is used to identify the interval at which the RAD feature
will initialize. The units of this object is minutes.rw Integer32 .1.3.6.1.4.1.11898.2.1.21.4.2 |
oriRADInterfaceBitmaskThis object is used to configure the interface(s) on which the RAD
feature will operate on.rw InterfaceBitmask .1.3.6.1.4.1.11898.2.1.21.4.3 |
oriRADLastSuccessfulScanTimeThis object is the number of seconds that have elapsed since the
last successful RAD scan since the AP has started up.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.11898.2.1.21.4.4 |
oriRADAccessPointCountThis object represents the number of access points that were
discovered since the last RAD scan.ro Counter32 .1.3.6.1.4.1.11898.2.1.21.4.5 |
oriRADScanResultsTableThis table is used to store the RAD scan results. Each entry
represents an access point scanned in the network. SEQUENCE OF OriRADScanResultsTableEntry .1.3.6.1.4.1.11898.2.1.21.4.6 |
oriRADScanResultsTableEntryThis object represents an entry in the RAD scan results table. OriRADScanResultsTableEntry .1.3.6.1.4.1.11898.2.1.21.4.6.1 |
oriRADScanResultsTableIndexThis object is used as the index to the scan results table.ro Integer32 .1.3.6.1.4.1.11898.2.1.21.4.6.1.1 |
oriRADScanResultsMACAddressThis object represents the MAC address of the access point detected during
a RAD scan.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.21.4.6.1.2 |
oriRADScanResultsFrequencyChannelThis object represents the frequency channel of the access point.ro Integer32 .1.3.6.1.4.1.11898.2.1.21.4.6.1.3 |
oriSecurityConfigTableThis table is used to specify the security configuration for
the wireless interface(s) in the access point.deprecated SEQUENCE OF OriSecurityConfigTableEntry .1.3.6.1.4.1.11898.2.1.21.5 |
oriSecurityConfigTableEntryThis object represents an entry in the security configuration table.deprecated OriSecurityConfigTableEntry .1.3.6.1.4.1.11898.2.1.21.5.1 |
oriSecurityConfigTableSupportedSecurityModesThis object is used to provide information on the supported
security modes by the wireless interface(s). The possible security
modes can be:
- None: no security mode enabled.
- dot1x: 802.1x authentication enabled.
- mixed: mixed WEP and 802.1x.
- wpa: WiFi Protected Access enabled.
- wpa-psk: WiFi Protected Access with Preshared Keys enabled.rodeprecated DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.21.5.1.1 |
oriSecurityConfigTableSecurityModeThis object is used to configure the security mode. The supported
security modes are:
- None: no security mode enabled.
- dot1x: 802.1x authentication enabled.
- mixed: mixed WEP and 802.1x.
- wpa: WiFi Protected Access enabled.
- wpa-psk: WiFi Protected Access with Preshared Keys enabled.rwdeprecated Enumeration .1.3.6.1.4.1.11898.2.1.21.5.1.2 |
oriSecurityConfigTableRekeyingIntervalThis object represents the encryption rekeying interval in seconds.rwdeprecated Integer32 .1.3.6.1.4.1.11898.2.1.21.5.1.3 |
oriSecurityConfigTableEncryptionKeyLengthThis object represents the encryption key length, the supported
key lengths are 64 bits (40 + 24 for IV), 128 bits
(104 + 24 for IV), and 152 bits (128 + 24 for IV).rwdeprecated Enumeration .1.3.6.1.4.1.11898.2.1.21.5.1.4 |
oriSecurityHwConfigResetStatusThis object is used to enable/disable the status of configuration
reset using the hardware reset button.rw ObjStatus .1.3.6.1.4.1.11898.2.1.21.6 |
oriSecurityHwConfigResetPasswordThis object represents the configuration reset password. This object
should be treated as write-only and returned as asterisks.rw DisplayString .1.3.6.1.4.1.11898.2.1.21.7 |
orinocoRogueScan OBJECT IDENTIFIER .1.3.6.1.4.1.11898.2.1.21.8 |
oriRogueScanConfigTableThis table is used to configure the Rogue Scan feature per wireless
network interface card. SEQUENCE OF OriRogueScanConfigTableEntry .1.3.6.1.4.1.11898.2.1.21.8.1 |
oriRogueScanConfigTableEntryThis object represents an entry in the Rogue Scan Config Table. OriRogueScanConfigTableEntry .1.3.6.1.4.1.11898.2.1.21.8.1.1 |
oriRogueScanConfigTableScanModeThis object is used to configure the scan mode for the wireless NIC.rw Enumeration .1.3.6.1.4.1.11898.2.1.21.8.1.1.1 |
oriRogueScanConfigTableScanCycleTimeThis object is used to configure the rogue scan cycle time for the
wireless NIC.rw Integer32 .1.3.6.1.4.1.11898.2.1.21.8.1.1.2 |
oriRogueScanConfigTableScanStatusThis object is used to enable/disable rogue scan on the wireless
NIC.rw ObjStatus .1.3.6.1.4.1.11898.2.1.21.8.1.1.3 |
oriRogueScanStationCountWirelessCardAThis object represents the number of stations that were
discovered/detected on the device's wireless NIC A.ro Counter32 .1.3.6.1.4.1.11898.2.1.21.8.2 |
oriRogueScanStationCountWirelessCardBThis object represents the number of stations that were
discovered/detected on the device's wireless NIC B.ro Counter32 .1.3.6.1.4.1.11898.2.1.21.8.3 |
oriRogueScanResultsTableAgingTimeThis object represents the aging time for the entries in
RogueScanResultsTable, after which the entries are removed from
RogueScanResultsTable.rw Integer32 .1.3.6.1.4.1.11898.2.1.21.8.4 |
oriRogueScanResultsTableClearEntriesThis object is used to remove the content/entries of
RogueScanResultsTable. When this object is set, the content of the
table shall be cleared.rw Integer32 .1.3.6.1.4.1.11898.2.1.21.8.5 |
oriRogueScanResultsNotificationModeThis object is used to configure the trap/notification mode for
detected stations during Rogue Scan.rw Enumeration .1.3.6.1.4.1.11898.2.1.21.8.6 |
oriRogueScanResultsTrapReportTypeThis object is used to configure the trap/notification report type
for detected stations during Rogue Scan.rw Enumeration .1.3.6.1.4.1.11898.2.1.21.8.7 |
oriRogueScanResultsTableThis table is used to store the rogue scan results. Each entry
represents a rogue wireless station detected in the network. SEQUENCE OF OriRogueScanResultsTableEntry .1.3.6.1.4.1.11898.2.1.21.8.8 |
oriRogueScanResultsTableEntryThis object represents an entry in the rogue scan results table. OriRogueScanResultsTableEntry .1.3.6.1.4.1.11898.2.1.21.8.8.1 |
oriRogueScanResultsTableIndexThis object is used as the index to the rogue scan results table.ro Integer32 .1.3.6.1.4.1.11898.2.1.21.8.8.1.1 |
oriRogueScanResultsStationTypeThis object represents the type of station detected during a
rogue scan.ro Enumeration .1.3.6.1.4.1.11898.2.1.21.8.8.1.2 |
oriRogueScanResultsMACAddressThis object represents the MAC address of the station detected during
a rogue scan.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.21.8.8.1.3 |
oriRogueScanResultsFrequencyChannelThis object represents the frequency channel on which the rogue
wireless stations was detected.ro DisplayString .1.3.6.1.4.1.11898.2.1.21.8.8.1.5 |
oriRogueScanResultsSNRThis object represents the signal to noise ration (SNR) for the
station detected during a rogue scan.ro Integer32 .1.3.6.1.4.1.11898.2.1.21.8.8.1.6 |
oriRogueScanResultsBSSIDThis object represents BSSID of the station detected during a
rogue scan.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.21.8.8.1.7 |
oriSecurityProfileTableThis table is used to configure a security profile. A security
profile can consist of single or muliple security modes. SEQUENCE OF OriSecurityProfileTableEntry .1.3.6.1.4.1.11898.2.1.21.9 |
oriSecurityProfileTableEntryThis object represents an entry in the security profile table.
This table is index by two indices - the first/primary index defines
the security profile, the second index defines a single or multiple
security policies per profile. The primary index is used in the
wireless interface SSID table to specify which security profile to
use per SSID.
The admin/user can configure policies for different wireless station
types by specifying a authentication and cipher mode/type. Below are
examples of how to configure different STA types.
STA Type Authentication Mode Cipher Mode
======== =================== ===========
Non Secure None None
WEP None WEP (64, 128, 152)
802.1x 802.1x WEP (64, 128)
WPA 802.1x TKIP
WPA-PSK PSK TKIP
802.11i 802.1x AES
802.11i-PSK PSK AES
In the case of None, WEP, WPA-PSK, and 802.11i-PSK, MAC Access Control
Table/List and RADIUS based MAC access control can be used to
authenticate the wireless STA. OriSecurityProfileTableEntry .1.3.6.1.4.1.11898.2.1.21.9.1 |
oriSecurityProfileTableIndexThis object represents the primary index of the Security Policy
Table. This index is used to specify which security policy will
be used per SSID, in the Wireless Interface SSID Table. A security
policy can consist of a single or multiple security modes.ro Integer32 .1.3.6.1.4.1.11898.2.1.21.9.1.1 |
oriSecurityProfileTableSecModeIndexThis object is the secondary index to the Security Policy Table.
This index will represent the different security modes per security
profile.ro Integer32 .1.3.6.1.4.1.11898.2.1.21.9.1.2 |
oriSecurityProfileTableAuthenticationModeThis object is used to specify the authentication mode for the
security mode.ro Enumeration .1.3.6.1.4.1.11898.2.1.21.9.1.3 |
oriSecurityProfileTableCipherModeThis object is used to specify the cipher mode/type for the security
mode.ro Enumeration .1.3.6.1.4.1.11898.2.1.21.9.1.4 |
oriSecurityProfileTableEncryptionKey0This object represents Encryption Key 0. This object should be
treated as write-only and returned as asterisks.rw WEPKeyType .1.3.6.1.4.1.11898.2.1.21.9.1.5 |
oriSecurityProfileTableEncryptionKey1This object represents Encryption Key 1. This object should be
treated as write-only and returned as asterisks.rw WEPKeyType .1.3.6.1.4.1.11898.2.1.21.9.1.6 |
oriSecurityProfileTableEncryptionKey2This object represents Encryption Key 2. This object should be
treated as write-only and returned as asterisks.rw WEPKeyType .1.3.6.1.4.1.11898.2.1.21.9.1.7 |
oriSecurityProfileTableEncryptionKey3This object represents Encryption Key 3. This object should be
treated as write-only and returned as asterisks.rw WEPKeyType .1.3.6.1.4.1.11898.2.1.21.9.1.8 |
oriSecurityProfileTableEncryptionTxKeyThis object indicates which encryption key is used to encrypt
data that is sent via the wireless interfaces. The default value
for this object should be key 0.rw Integer32 .1.3.6.1.4.1.11898.2.1.21.9.1.9 |
oriSecurityProfileTableEncryptionKeyLengthThis object represents the encryption key length, the supported
key lengths are 64 bits (40 + 24 for IV), 128 bits
(104 + 24 for IV), and 152 bits (128 + 24 for IV).rw Enumeration .1.3.6.1.4.1.11898.2.1.21.9.1.10 |
oriSecurityProfileTablePSKValueThe Pre-Shared Key (PSK) for when RSN in PSK mode is the selected
authentication suite. In that case, the PMK will obtain its value
from this object.
This object is logically write-only. Reading this variable shall
return unsuccessful status or null or zero.rw OCTET STRING ( SIZE (32) ) .1.3.6.1.4.1.11898.2.1.21.9.1.11 |
oriSecurityProfileTablePSKPassPhraseThe PSK, for when RSN in PSK mode is the selected authentication
suite, is configured by oriWirelessIfSSIDTablePSKValue. An alternative
manner of setting the PSK uses the password-to-key algorithm defined
in the standard. This variable provides a means to enter a pass phrase.
When this object is written, the RSN entity shall use the
password-to-key algorithm specified in the standard to derive a
pre-shared and populate oriWirelessIfSSIDTablePSKValue with this key.
This object is logically write-only. Reading this variable shall
return unsuccessful status or null or zero.rw DisplayString ( SIZE( 8..63) ) .1.3.6.1.4.1.11898.2.1.21.9.1.12 |
oriSecurityProfileTableStatusThis object represents the Table row status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.21.9.1.14 |
oriSecurityProfileFourWEPKeySupportThis object is used to configure the security profile to use
with four WEP keys. Currently only one security profile can be active
which supports four WEP keys. Therefore this object is used to
specify which profile will be using four WEP keys. The purpose of
this object is to support legacy products/users that are still using
four WEP keys.rw Integer32 .1.3.6.1.4.1.11898.2.1.21.10 |
orinocoPPPoE OBJECT IDENTIFIER .1.3.6.1.4.1.11898.2.1.22 |
oriPPPoEStatusThis object allows to enable or disable the PPPoE service in the
device.rw Enumeration .1.3.6.1.4.1.11898.2.1.22.1 |
oriPPPoEMaximumNumberOfSessionsThis object represents the maximum number of PPPoE sessions.rw Integer32 .1.3.6.1.4.1.11898.2.1.22.2 |
oriPPPoENumberOfActiveSessionsThis object represents the number of active PPPoE sessions.ro Counter32 .1.3.6.1.4.1.11898.2.1.22.3 |
oriPPPoESessionTableThis table is used to configure the PPPoE session information. SEQUENCE OF OriPPPoESessionTableEntry .1.3.6.1.4.1.11898.2.1.22.4 |
oriPPPoESessionTableEntryThis object represents an entry in the PPPoE session table. OriPPPoESessionTableEntry .1.3.6.1.4.1.11898.2.1.22.4.1 |
oriPPPoESessionTableIndexThis object is used as the index to the PPPoE Session Table.ro Integer32 .1.3.6.1.4.1.11898.2.1.22.4.1.1 |
oriPPPoESessionWANConnectModeThis object represents the WAN connect mode.rw Enumeration .1.3.6.1.4.1.11898.2.1.22.4.1.2 |
oriPPPoESessionIdleTimeOutThis object is used as a timeout for the PPPoE session to be
disconnected from public side if idle for specified amount of
time.rw Integer32 .1.3.6.1.4.1.11898.2.1.22.4.1.3 |
oriPPPoESessionConnectTimeThis object identifies the PPPoE session connect time.ro Counter32 .1.3.6.1.4.1.11898.2.1.22.4.1.4 |
oriPPPoESessionConnectTimeLimitationThis object represents the maximum connection time per session.rw Integer32 .1.3.6.1.4.1.11898.2.1.22.4.1.5 |
oriPPPoESessionConfigPADITxIntervalThis object represents the time in seconds between PADI retries
from the Host.rw Integer32 .1.3.6.1.4.1.11898.2.1.22.4.1.6 |
oriPPPoESessionConfigPADIMaxNumberOfRetriesThis object represents the number of times the Host sends
a PADI.rw Integer32 .1.3.6.1.4.1.11898.2.1.22.4.1.7 |
oriPPPoESessionBindingsNumberPADITxThis object represents the number of PPPoE PADI transmitted.ro Counter32 .1.3.6.1.4.1.11898.2.1.22.4.1.8 |
oriPPPoESessionBindingsNumberPADTTxThis object represents the number of PPPoE PADT transmitted.ro Counter32 .1.3.6.1.4.1.11898.2.1.22.4.1.9 |
oriPPPoESessionBindingsNumberServiceNameErrorsThis object represents the number of PPPoE Service-Name-Error
tags received/transmitted.ro Counter32 .1.3.6.1.4.1.11898.2.1.22.4.1.10 |
oriPPPoESessionBindingsNumberACSystemErrorsThis object represents the number of PPPoE AC-System-Error
tags received/transmitted.ro Counter32 .1.3.6.1.4.1.11898.2.1.22.4.1.11 |
oriPPPoESessionBindingsNumberGenericErrorsRxThis object represents the number of PPPoE Generic-Error
tags received.ro Counter32 .1.3.6.1.4.1.11898.2.1.22.4.1.12 |
oriPPPoESessionBindingsNumberGenericErrorsTxThis object represents the number of PPPoE Generic Error
tags transmitted.ro Counter32 .1.3.6.1.4.1.11898.2.1.22.4.1.13 |
oriPPPoESessionBindingsNumberMalformedPacketsThis object represents teh number of malformed PPPoE
packets received.ro Counter32 .1.3.6.1.4.1.11898.2.1.22.4.1.14 |
oriPPPoESessionBindingsNumberMultiplePADORxThis object represents the number of PPPoE multiple PADO's
received after a PADI request.ro Counter32 .1.3.6.1.4.1.11898.2.1.22.4.1.15 |
oriPPPoESessionUserNameThis object represents the PPPoE user name.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.22.4.1.16 |
oriPPPoESessionUserNamePasswordThis object represents the PPPoE user name password. This object
should be treated as write-only and returned as asterisks.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.22.4.1.17 |
oriPPPoESessionServiceNameThis object represents the PPPoE service name.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.22.4.1.18 |
oriPPPoESessionISPNameThis object represents the PPPoE ISP name.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.22.4.1.19 |
oriPPPoESessionTableStatusThis object represents the PPPoE ISP table entry status.rw Enumeration .1.3.6.1.4.1.11898.2.1.22.4.1.20 |
oriPPPoESessionWANManualConnectThis object is used to connect of disconnect the PPPoE session
when the connect mode is set to manual.rw Enumeration .1.3.6.1.4.1.11898.2.1.22.4.1.21 |
oriPPPoESessionWANConnectionStatusThis object represents the state of the PPPoE WAN connection
interface.ro Enumeration .1.3.6.1.4.1.11898.2.1.22.4.1.22 |
oriPPPoEMACtoSessionTableThis table is used to map client MAC address to PPPoE Session
information for an ISP. SEQUENCE OF OriPPPoEMACtoSessionTableEntry .1.3.6.1.4.1.11898.2.1.22.5 |
oriPPPoEMACtoSessionTableEntryThis object represents an entry in the PPPoE MAC to
Session table. OriPPPoEMACtoSessionTableEntry .1.3.6.1.4.1.11898.2.1.22.5.1 |
oriPPPoEMACtoSessionTableIndexThis object is used as the index to the PPPoE Session Table.ro Integer32 .1.3.6.1.4.1.11898.2.1.22.5.1.1 |
oriPPPoEMACtoSessionTableMACAddressThis object represents the client MAC address.rw PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.22.5.1.2 |
oriPPPoEMACtoSessionTableISPNameThis object represents the ISP name.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.22.5.1.3 |
oriPPPoEMACtoSessionTableStatusThis object represents the PPPoE MAC to Session table
entry status.rw Enumeration .1.3.6.1.4.1.11898.2.1.22.5.1.4 |
orinocoConfig OBJECT IDENTIFIER .1.3.6.1.4.1.11898.2.1.23 |
oriConfigResetToDefaultsThis object represents the quickstart modes that the
device can be configured in.rw Enumeration .1.3.6.1.4.1.11898.2.1.23.1 |
oriConfigFileTableThis table contains the current configuration files stored in the
device. This table is used to manage the different configuration
files. SEQUENCE OF OriConfigFileTableEntry .1.3.6.1.4.1.11898.2.1.23.2 |
oriConfigFileTableEntryThis object represents an entry in the configuration file table. OriConfigFileTableEntry .1.3.6.1.4.1.11898.2.1.23.2.1 |
oriConfigFileTableIndexThis object represents the index to the configuration file
table.ro Integer32 .1.3.6.1.4.1.11898.2.1.23.2.1.1 |
oriConfigFileNameThis object represents the configuration file name.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.23.2.1.2 |
oriConfigFileStatusThis object represents the status of the configuration file.
The possible options are:
- Enable: active configuration file
- Disable: inactive configuration file
- Delete: in order to delete the configuration filerw Enumeration .1.3.6.1.4.1.11898.2.1.23.2.1.3 |
oriConfigSaveFileThis object saves the configuration to the specified name.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.23.3 |
oriConfigSaveKnownGoodThis object is used to identify the last know good configuration
file used. Setting a value of 1 to this objecgt saves the current
configuration as the known good configuration.rw Enumeration .1.3.6.1.4.1.11898.2.1.23.4 |
orinocoDNS OBJECT IDENTIFIER .1.3.6.1.4.1.11898.2.1.24 |
oriDNSRedirectStatusThis object is used to enable or disable the DNS Redirect
functionality.rw Enumeration .1.3.6.1.4.1.11898.2.1.24.1 |
oriDNSRedirectMaxResponseWaitTimeThis object represents the maximum response wait time for
DNS redirect. The units for this object is seconds.rw Integer32 .1.3.6.1.4.1.11898.2.1.24.2 |
oriDNSPrimaryDNSIPAddressThis object represents the Primary DNS IP Address.rw IpAddress .1.3.6.1.4.1.11898.2.1.24.3 |
oriDNSSecondaryDNSIPAddressThis object represents the Secondary DNS IP Address.rw IpAddress .1.3.6.1.4.1.11898.2.1.24.4 |
orinocoDNSClient OBJECT IDENTIFIER .1.3.6.1.4.1.11898.2.1.24.5 |
oriDNSClientStatusThis object is used to enable or disable the DNS Client feature.rw Enumeration .1.3.6.1.4.1.11898.2.1.24.5.1 |
oriDNSClientPrimaryServerIPAddressThis object represents the Primary Server DNS IP Address.rw IpAddress .1.3.6.1.4.1.11898.2.1.24.5.2 |
oriDNSClientSecondaryServerIPAddressThis object represents the Secondary Server DNS IP Address.rw IpAddress .1.3.6.1.4.1.11898.2.1.24.5.3 |
oriDNSClientDefaultDomainNameThis object represents the default domain name for the DNS Client.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.24.5.4 |
orinocoAOL OBJECT IDENTIFIER .1.3.6.1.4.1.11898.2.1.25 |
oriAOLNATALGStatusThis object is used to enable/disable the AOL NAT Application
Level Gateway (ALG) support.rw Enumeration .1.3.6.1.4.1.11898.2.1.25.1 |
orinocoNAT OBJECT IDENTIFIER .1.3.6.1.4.1.11898.2.1.26 |
oriNATStatusThis object is used to enable/disable the NAT feature.rw ObjStatus .1.3.6.1.4.1.11898.2.1.26.1 |
oriNATTypeA Bit Mask documenting the NAT device's actual
configuration according to natTypeMask above.
Its value may be one and only one of the options below:
- Basic-NAT (Bit 0)
- NAPT (Bit 1)
- Bi-directional-NAT (Bit 2)
- Twice-NAT (Bit 3)
- RSA-IP-Server (Bit 4)
- RSAP-IP-Server (Bit 5)
- Bit 0, if set, indicates that Basic-NAT is configured.
- Bit 1, if set, indicates that NAPT is configured.
- Bit 2, if set, indicates that Bi-directional-NAT
is configured.
- Bit 3, if set, indicates that Twice-NAT is configured.
- Bit 4, if set, indicates that RSA-IP-Server is
configured.
- Bit 5, if set, indicates that RSAP-IP-Server
is configured.rw Integer32 .1.3.6.1.4.1.11898.2.1.26.2 |
oriNATStaticBindStatusThis object is used to enable or disable static bind entries
on the NAT device.rw Enumeration .1.3.6.1.4.1.11898.2.1.26.3 |
oriNATPublicIPAddressThis object is used to provide information on the NAT public IP
Address.ro IpAddress .1.3.6.1.4.1.11898.2.1.26.4 |
oriNATStaticIPBindTableThis table contains NAT IP bind specific information. SEQUENCE OF OriNATStaticIPBindTableEntry .1.3.6.1.4.1.11898.2.1.26.5 |
oriNATStaticIPBindTableEntryThis object is an entry in the NAT Static IP Bind Table. OriNATStaticIPBindTableEntry .1.3.6.1.4.1.11898.2.1.26.5.1 |
oriNATStaticIPBindTableIndexThis object is used as the index for the NAT static IP
bind table.ro Integer32 .1.3.6.1.4.1.11898.2.1.26.5.1.1 |
oriNATStaticIPBindLocalAddressThis object represents the local IP address for this NAT
Static IP bind Table entry.rw IpAddress .1.3.6.1.4.1.11898.2.1.26.5.1.2 |
oriNATStaticIPBindRemoteAddressThis object represents the remote IP address for this NAT
Static IP bind Table entry.rw IpAddress .1.3.6.1.4.1.11898.2.1.26.5.1.3 |
oriNATStaticIPBindTableEntryStatusThe object indicates the status of the NAT Static IP Bind
Table entry.rw Enumeration .1.3.6.1.4.1.11898.2.1.26.5.1.4 |
oriNATStaticPortBindTableThis table is used to configure NAT Port bind specific
information. SEQUENCE OF OriNATStaticPortBindTableEntry .1.3.6.1.4.1.11898.2.1.26.6 |
oriNATStaticPortBindTableEntryThis object represents an entry in the NAT Static Port Bind
Table. OriNATStaticPortBindTableEntry .1.3.6.1.4.1.11898.2.1.26.6.1 |
oriNATStaticPortBindTableIndexThis object is used as the index for the NAT static Port
bind table.ro Integer32 .1.3.6.1.4.1.11898.2.1.26.6.1.1 |
oriNATStaticPortBindLocalAddressThis object represents the local IP address for this NAT Static
Port bind Table entry.rw IpAddress .1.3.6.1.4.1.11898.2.1.26.6.1.2 |
oriNATStaticPortBindStartPortNumberThis object represents the start port number for this NAT Static
Port bind Table entry.rw Integer32 .1.3.6.1.4.1.11898.2.1.26.6.1.3 |
oriNATStaticPortBindEndPortNumberThis object represents the end port number for this NAT Static
Port bind Table entry.rw Integer32 .1.3.6.1.4.1.11898.2.1.26.6.1.4 |
oriNATStaticPortBindPortTypeThis object represents the port type for this NAT Static
Port bind Table entry.rw Enumeration .1.3.6.1.4.1.11898.2.1.26.6.1.5 |
oriNATStaticPortBindTableEntryStatusThe object indicates the status of the NAT Static Port Bind
Table entry.rw Enumeration .1.3.6.1.4.1.11898.2.1.26.6.1.6 |
orinocoSpectraLink OBJECT IDENTIFIER .1.3.6.1.4.1.11898.2.1.29 |
oriSpectraLinkStatusThis object is used to enable or disable the SpectraLink VoIP
feature.rw ObjStatus .1.3.6.1.4.1.11898.2.1.29.1 |
oriSpectraLinkLegacyDeviceSupportThis object is used to enable/disable SpectraLink VoIP support for
legacy SpectraLink devices/phones.rw ObjStatus .1.3.6.1.4.1.11898.2.1.29.2 |
orinocoVLAN OBJECT IDENTIFIER .1.3.6.1.4.1.11898.2.1.30 |
oriVLANStatusThis object is used to enable or disable the VLAN feature.rw ObjStatus .1.3.6.1.4.1.11898.2.1.30.1 |
oriVLANMgmtIdentifierThis object represents the VLAN management Identifier (ID).rw VlanId .1.3.6.1.4.1.11898.2.1.30.2 |
oriVLANIDTableThis table is used to configure the VLAN IDs for the device. This
table has been deprecated.deprecated SEQUENCE OF OriVLANIDTableEntry .1.3.6.1.4.1.11898.2.1.30.3 |
oriVLANIDTableEntryThis object represents an entry in the respective table. In this
case each table entry represents a VLAN ID. This object has been
deprecated.deprecated OriVLANIDTableEntry .1.3.6.1.4.1.11898.2.1.30.3.1 |
oriVLANIDTableIndexThis object represents the index to the VLAN ID Table. This object
has been deprecated.rodeprecated Integer32 .1.3.6.1.4.1.11898.2.1.30.3.1.1 |
oriVLANIDTableIdentifierThis object represents the VLAN Identifier (ID). This object has been
deprecated.rwdeprecated VlanId .1.3.6.1.4.1.11898.2.1.30.3.1.2 |
orinocoDMZ OBJECT IDENTIFIER .1.3.6.1.4.1.11898.2.1.31 |
oriDMZHostTableA table containing DMZ host IP information.
Only if the system is in Gateway mode, and the NAT is enabled,
and this table has valid 'enabled' entry, the DMZ takes effect. SEQUENCE OF OriDMZHostTableEntry .1.3.6.1.4.1.11898.2.1.31.1 |
oriDMZHostTableEntryThis object represents an entry in the DMZ host IP Table. OriDMZHostTableEntry .1.3.6.1.4.1.11898.2.1.31.1.1 |
oriDMZHostTableIndexThis object is used as the index for the DMZ host IP Table.ro Integer32 .1.3.6.1.4.1.11898.2.1.31.1.1.1 |
oriDMZHostTableHostIPThis object represents the DMZ host IP address.rw IpAddress .1.3.6.1.4.1.11898.2.1.31.1.1.2 |
oriDMZHostTableCommentThis objecgt is used for an optional comment associated to the
DMZ host IP Table entry.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.31.1.1.3 |
oriDMZHostTableEntryStatusThe object indicates the status of the DMZ host IP Table entry.rw Enumeration .1.3.6.1.4.1.11898.2.1.31.1.1.4 |
orinocoOEM OBJECT IDENTIFIER .1.3.6.1.4.1.11898.2.1.32 |
oriOEMNameThis object is used to specify the OEM name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.32.1 |
oriOEMHomeUrlThis object is used to specify the OEM home URL.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.32.2 |
oriOEMProductNameThis object represents the product name. It is the same name as
shown in all management Web pages.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.32.3 |
oriOEMProductModelThis object represents the product model.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.32.4 |
oriOEMLogoImageFileThis object represents the name of logo image file.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.32.5 |
oriOEMNoNavLogoImageFileThis object represents the name of no nav. logo image file.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.32.6 |
orinocoStationStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.11898.2.1.33 |
oriStationStatTableThis table contains wireless stations statistics. SEQUENCE OF OriStationStatTableEntry .1.3.6.1.4.1.11898.2.1.33.1 |
oriStationStatTableEntryThis object represents an entry in the respective table. In this
case each table entry represents a wireless station. OriStationStatTableEntry .1.3.6.1.4.1.11898.2.1.33.1.1 |
oriStationStatTableIndexThis object represents the index of the stations statistics
table. This table is limited to 500 entries.ro Integer32 .1.3.6.1.4.1.11898.2.1.33.1.1.1 |
oriStationStatTableMACAddressThis object represents the MAC address of the station for which
the statistics are gathered.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.33.1.1.2 |
oriStationStatTableIPAddressThis object represents the IP address of the stations for which
the statistics are gathered. If the IP address is not known,
0.0.0.0 will be returned.ro IpAddress .1.3.6.1.4.1.11898.2.1.33.1.1.3 |
oriStationStatTableInterfaceThis object represents the number of the interface on which the
station is last seen.ro Integer32 .1.3.6.1.4.1.11898.2.1.33.1.1.4 |
oriStationStatTableNameThis object represents the name of the station. If the name is
not known, an empty string will be returned.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.33.1.1.5 |
oriStationStatTableTypeThis object represents the type of station.ro Enumeration .1.3.6.1.4.1.11898.2.1.33.1.1.6 |
oriStationStatTableMACProtocolThis object represents the MAC protocol for this station.ro Enumeration .1.3.6.1.4.1.11898.2.1.33.1.1.7 |
oriStationStatTableAdminStatusThis object represents the administrative state for the station.
The testing(3) state indicates that no operational packets can
be passed.ro Enumeration .1.3.6.1.4.1.11898.2.1.33.1.1.8 |
oriStationStatTableOperStatusThis object represents the current operational state of the
interface. The testing(3) state indicates that no operational
packets can be passed.ro Enumeration .1.3.6.1.4.1.11898.2.1.33.1.1.9 |
oriStationStatTableLastChangeThis object represents the value of sysUpTime at the time the
station entered its current operational state. If the current
state was entered prior to the last re-initialization of the
local network management subsystem, then this object contains a
zero value.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.11898.2.1.33.1.1.10 |
oriStationStatTableLastStateThis object represents the last state of this station.ro Enumeration .1.3.6.1.4.1.11898.2.1.33.1.1.11 |
oriStationStatTableInOctetsThe total number of octets received from the station,
including framing characters.ro Counter32 .1.3.6.1.4.1.11898.2.1.33.1.1.12 |
oriStationStatTableInUcastPktsThis object represents the number of unicast packets from the
station that are further processed by either by the bridge/router
or by the internal host.ro Counter32 .1.3.6.1.4.1.11898.2.1.33.1.1.13 |
oriStationStatTableInNUcastPktsThis object represents the number of non-unicast packets
(i.e. broadcast or multicast) from the station that are further
processed by either by the bridge/router or by the internal host.ro Counter32 .1.3.6.1.4.1.11898.2.1.33.1.1.14 |
oriStationStatTableInDiscardsThis object represents the number of inbound packets which were
chosen to be discarded even though no errors had been detected to
prevent their being deliverable to the internal bridge/router or
the internal host. One possible reason for discarding such a
packet could be to lack of buffer space.ro Counter32 .1.3.6.1.4.1.11898.2.1.33.1.1.15 |
oriStationStatTableOutOctetsThis object represents the total number of octets send to the
station, including framing characters.ro Counter32 .1.3.6.1.4.1.11898.2.1.33.1.1.16 |
oriStationStatTableOutUcastPktsThis object represents the number of packets that the internal
bridge/router or the internal host requested be transmitted to the
station, including those that were discarded or not sent.ro Counter32 .1.3.6.1.4.1.11898.2.1.33.1.1.17 |
oriStationStatTableOutNUcastPktsThis object represents the number of packets that the internal
bridge/router or the internal host requested be transmitted to a
non-unicast (i.e. broadcast or multicast) address that includes
the station. This counter includes those packets that were
discarded or not sent.ro Counter32 .1.3.6.1.4.1.11898.2.1.33.1.1.18 |
oriStationStatTableOutDiscardsThis object represents the number of outbound packets which were
chosen to be discarded even though no errors had been detected to
prevent their being deliverable to the internal bridge/router or
the internal host. One possible reason for discarding such a
packet could be to lack of buffer space.ro Counter32 .1.3.6.1.4.1.11898.2.1.33.1.1.19 |
oriStationStatTableInSignalThis object represents the current signal level calculated over
the inbound packets from this station. This variable indicates
the running average of the local signal level using the algorithm
(3/4*oldvalue + 1/4*newvalue).ro Integer32 (-102..-10) .1.3.6.1.4.1.11898.2.1.33.1.1.20 |
oriStationStatTableInNoiseThis object represents the current noise level calculated over
the inbound packets from this station. This variable indicates
the running average of the local noise level using the algorithm
(3/4*oldvalue + 1/4*newvalue).ro Integer32 (-102..-10) .1.3.6.1.4.1.11898.2.1.33.1.1.21 |
oriStationStatTableRemoteSignalThis object represents the current remote signal level calculated
over the inbound packets from this station on the remote station.
This variable indicates the running average of the remote signal
level using the algorithm (3/4*oldvalue + 1/4*newvalue).ro Integer32 (-102..-10) .1.3.6.1.4.1.11898.2.1.33.1.1.22 |
oriStationStatTableRemoteNoiseThis object represents the current remote noise level calculated
over the inbound packets from this station on the remote station.
This variable indicates the running average of the remote noise
level using the algorithm (3/4*oldvalue + 1/4*newvalue).ro Integer32 (-102..-10) .1.3.6.1.4.1.11898.2.1.33.1.1.23 |
oriStationStatTableLastInPktTimeThis object represents the value of sysUpTime at the time the
last packet from the remote station was received.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.11898.2.1.33.1.1.24 |
oriStationStatStatusThis object is used to enable or disable the monitoring of the
wireless station statistics.rw Enumeration .1.3.6.1.4.1.11898.2.1.33.2 |
oriStationStatNumberOfClientsThis object represents the number of active wireless clients
associated to the access point.ro Counter32 .1.3.6.1.4.1.11898.2.1.33.3 |
orinocoSNTP OBJECT IDENTIFIER .1.3.6.1.4.1.11898.2.1.34 |
oriSNTPStatusThis object is used to enable or disable the SNTP functionality.rw Enumeration .1.3.6.1.4.1.11898.2.1.34.1 |
oriSNTPPrimaryServerNameOrIPAddressThis object represents the primary SNTP server IP address or host
name.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.34.2 |
oriSNTPSecondaryServerNameOrIPAddressThis object represents the secondary SNTP server IP address or host
name.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.34.3 |
oriSNTPTimeZoneThis parameter is used for the device to know how to adjust GMT for
local time.rw Enumeration .1.3.6.1.4.1.11898.2.1.34.4 |
oriSNTPDateAndTimeThis object represents the Date and Time. The format of this object
is the same as the DateAndTime textual convention.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.11898.2.1.34.5 |
oriSNTPDayLightSavingTimeThis parameter indicates the number of hours to adjust for
Daylight Saving Time.rw Enumeration .1.3.6.1.4.1.11898.2.1.34.6 |
oriSNTPYearThis object represents the year. This object can be used to manually
configure the year in case the Date and Time is not retrieved from an
SNTP server.rw Integer32 .1.3.6.1.4.1.11898.2.1.34.7 |
oriSNTPMonthThis object represents the month. This object can be used to manually
configure the month in case the Date and Time is not retrieved from an
SNTP server.rw Integer32 .1.3.6.1.4.1.11898.2.1.34.8 |
oriSNTPDayThis object represents the day of the month. This object can be used
to manually configure the year in case the Date and Time is not
retrieved from an SNTP server.rw Integer32 .1.3.6.1.4.1.11898.2.1.34.9 |
oriSNTPHourThis object represents the hour of day. This object can be used
to manually configure the hour in case the Date and Time is not
retrieved from an SNTP server.rw Integer32 .1.3.6.1.4.1.11898.2.1.34.10 |
oriSNTPMinutesThis object represents the minutes. This object can be used to
manually configure the minutes in case the Date and Time is not
retrieved from an SNTP server.rw Integer32 .1.3.6.1.4.1.11898.2.1.34.11 |
oriSNTPSecondsThis object represents the number of seconds. This object can be used
to manually configure the seconds in case the Date and Time is not
retrieved from an SNTP server.rw Integer32 .1.3.6.1.4.1.11898.2.1.34.12 |
orinocoNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.11898.2.2 |
orinocoConformance OBJECT IDENTIFIER .1.3.6.1.4.1.11898.2.3 |
orinocoGroups OBJECT IDENTIFIER .1.3.6.1.4.1.11898.2.3.1 |
orinocoCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.11898.2.3.2 |
orinocoProducts OBJECT IDENTIFIER .1.3.6.1.4.1.11898.2.4 |
ap1000 OBJECT IDENTIFIER .1.3.6.1.4.1.11898.2.4.1 |
rg1000 OBJECT IDENTIFIER .1.3.6.1.4.1.11898.2.4.2 |
as1000 OBJECT IDENTIFIER .1.3.6.1.4.1.11898.2.4.3 |
as2000 OBJECT IDENTIFIER .1.3.6.1.4.1.11898.2.4.4 |
ap500 OBJECT IDENTIFIER .1.3.6.1.4.1.11898.2.4.5 |
ap2000 OBJECT IDENTIFIER .1.3.6.1.4.1.11898.2.4.6 |
bg2000 OBJECT IDENTIFIER .1.3.6.1.4.1.11898.2.4.7 |
rg1100 OBJECT IDENTIFIER .1.3.6.1.4.1.11898.2.4.8 |
tmp11 OBJECT IDENTIFIER .1.3.6.1.4.1.11898.2.4.9 |
ap600 OBJECT IDENTIFIER .1.3.6.1.4.1.11898.2.4.10 |
ap2500 OBJECT IDENTIFIER .1.3.6.1.4.1.11898.2.4.11 |
ap4000 OBJECT IDENTIFIER .1.3.6.1.4.1.11898.2.4.12 |
ap700 OBJECT IDENTIFIER .1.3.6.1.4.1.11898.2.4.13 |