OCCAM-ETHERLIKE-MIB
The OCCAM-ETHERLIKE-MIB provides standardized SNMP objects for monitoring Ethernet-like interface statistics and physical layer parameters defined in IEEE 802.3 Clause 30, specifically targeting 10Mb/s, 100Mb/s, and 1000Mb/s link speeds. It enables the collection of critical performance metrics such as octet counts, frame error rates, and collision statistics for OCCAM-managed network devices.
Imported Objects
Objects
17 total| Object Name |
|---|
org OBJECT IDENTIFIER .1.3 |
dod OBJECT IDENTIFIER .1.3.6 |
internet OBJECT IDENTIFIER .1.3.6.1 |
mgmt OBJECT IDENTIFIER .1.3.6.1.2 |
etherMIBThe MIB module to describe generic objects for Ethernet-like network interfaces. The following reference is used throughout this MIB module: [IEEE 802.3 Std] refers to: IEEE Std 802.3, 1998 Edition:'Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Specific requirements - Part 3: Carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer specifications', September 1998. Of particular interest is Clause 30, '10Mb/s,100Mb/s and 1000Mb/s Management'. MODULE-IDENTITY .1.3.6.1.4.1.6066.2.1.2.1.1 |
etherMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.6066.2.1.2.1.1.1 |
dot3 OBJECT IDENTIFIER .1.3.6.1.4.1.6066.2.1.2.1.1.1.7 |
dot3StatsTableStatistics for a collection of ethernet-like interfaces attached to a particular system. There will be one row in this table for each ethernet-like interface in the system. SEQUENCE OF Dot3StatsEntry .1.3.6.1.4.1.6066.2.1.2.1.1.1.7.2 |
dot3StatsEntryStatistics for a particular interface to an ethernet-like medium. Dot3StatsEntry .1.3.6.1.4.1.6066.2.1.2.1.1.1.7.2.1 |
dot3StatsIndexAn index value that uniquely identifies an interface to an ethernet-like medium. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.6066.2.1.2.1.1.1.7.2.1.1 |
dot3StatsSingleCollisionFramesA count of successfully transmitted frames on a particular interface for which transmission is inhibited by exactly one collision. A frame that is counted by an instance of this object is also counted by the corresponding instance of either the ifOutUcastPkts, ifOutMulticastPkts, or ifOutBroadcastPkts, and is not counted by the corresponding instance of the dot3StatsMultipleCollisionFrames object. This counter does not increment when the interface is operating in full-duplex mode. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.ro Counter32 .1.3.6.1.4.1.6066.2.1.2.1.1.1.7.2.1.4 |
dot3StatsFrameTooLongsA count of frames received on a particular interface that exceed the maximum permitted frame size. The count represented by an instance of this object is incremented when the frameTooLong status is returned by the MAC service to the LLC (or other MAC user). Received frames for which multiple error conditions obtain are, according to the conventions of IEEE 802.3 Layer Management, counted exclusively according to the error status presented to the LLC. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.ro Counter32 .1.3.6.1.4.1.6066.2.1.2.1.1.1.7.2.1.13 |
dot3Tests OBJECT IDENTIFIER .1.3.6.1.4.1.6066.2.1.2.1.1.1.7.6 |
dot3Errors OBJECT IDENTIFIER .1.3.6.1.4.1.6066.2.1.2.1.1.1.7.7 |
etherConformance OBJECT IDENTIFIER .1.3.6.1.4.1.6066.2.1.2.1.1.2 |
etherGroups OBJECT IDENTIFIER .1.3.6.1.4.1.6066.2.1.2.1.1.2.1 |
etherCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.6066.2.1.2.1.1.2.2 |
More MIBs from Occam
Browse all OccamMIBs →The OCCAM-MLT-MIB module enables the monitoring and management of metallic line testing operations on customer access lines, specifically exposing diagnostic parameters such as line attenuation, noise margin, and signal-to-noise ratio (SNR) for DSL infrastructure. This MIB facilitates the retrieval of physical layer test results and status indicators required for troubleshooting copper-based subscriber loops.
The OCCAM-REG-MODULE facilitates the monitoring and management of central registration states and session data for OccamNetworks hardware appliances via SNMP. It exposes specific metrics related to device registration status, active user sessions, and authentication state transitions within the vendor's network infrastructure.
The OCCAM-SHELF-MIB defines the managed object classes for monitoring the physical state, port status, and environmental telemetry of OCCAM chassis shelves. It enables network management systems to track shelf-level availability, slot occupancy, and hardware health metrics within OCCAM-based optical transport or switching infrastructure.
The OCCAM-SENSOR-MIB facilitates SNMP-based monitoring of physical sensor telemetry data within the BLC1100 hardware platform. This module provides standardized access to real-time environmental and operational readings, such as temperature, voltage, and fan status, for the BLC1100 system's entity management subsystem.
The OCCAM-ENTITY-MIB enables a single SNMP agent to expose and manage multiple distinct logical entities, such as virtual interfaces, sub-modules, or partitioned hardware components, by mapping them to standard entity MIB structures. This module facilitates granular monitoring of individual logical device states, configuration parameters, and operational metrics within complex, multi-tenant, or virtualized network appliances.