Nortel-MsCarrier-MscPassport-X25DteMIB
AI MIB Summary
Standard SNMP MIB module defining data structures for Nortel-MsCarrier-MscPassport-X25DteMIB.
212
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
212 total| Object Name |
|---|
mscX25Dte OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.90 |
mscX25DteRowStatusTableThis entry controls the addition and deletion of
mscX25Dte components. SEQUENCE OF MscX25DteRowStatusEntry .1.3.6.1.4.1.562.36.2.1.90.1 |
mscX25DteRowStatusEntryA single entry in the table represents a single
mscX25Dte component. MscX25DteRowStatusEntry .1.3.6.1.4.1.562.36.2.1.90.1.1 |
mscX25DteRowStatusThis variable is used as the basis for SNMP naming of
mscX25Dte components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.90.1.1.1 |
mscX25DteComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.90.1.1.2 |
mscX25DteStorageTypeThis variable represents the storage type value for the
mscX25Dte tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.90.1.1.4 |
mscX25DteIndexThis variable represents the index for the mscX25Dte tables. Integer32 .1.3.6.1.4.1.562.36.2.1.90.1.1.10 |
mscX25DtePeer OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.90.2 |
mscX25DtePeerRowStatusTableThis entry controls the addition and deletion of
mscX25DtePeer components. SEQUENCE OF MscX25DtePeerRowStatusEntry .1.3.6.1.4.1.562.36.2.1.90.2.1 |
mscX25DtePeerRowStatusEntryA single entry in the table represents a single
mscX25DtePeer component. MscX25DtePeerRowStatusEntry .1.3.6.1.4.1.562.36.2.1.90.2.1.1 |
mscX25DtePeerRowStatusThis variable is used as the basis for SNMP naming of
mscX25DtePeer components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.90.2.1.1.1 |
mscX25DtePeerComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.90.2.1.1.2 |
mscX25DtePeerStorageTypeThis variable represents the storage type value for the
mscX25DtePeer tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.90.2.1.1.4 |
mscX25DtePeerIndexThis variable represents the index for the mscX25DtePeer tables. Integer32 .1.3.6.1.4.1.562.36.2.1.90.2.1.1.10 |
mscX25DtePeerIfTableThis group provides the administrative set of parameters for the
Peer interface. SEQUENCE OF MscX25DtePeerIfEntry .1.3.6.1.4.1.562.36.2.1.90.2.10 |
mscX25DtePeerIfEntryAn entry in the mscX25DtePeerIfTable. MscX25DtePeerIfEntry .1.3.6.1.4.1.562.36.2.1.90.2.10.1 |
mscX25DtePeerEncAddressTypeThis attribute specifies the encapsulation type for the address of the
remote host with which this Peer component allows
communication.rw Enumeration .1.3.6.1.4.1.562.36.2.1.90.2.10.1.1 |
mscX25DtePeerEncAddressThis attribute specifies the encapsulation address of the remote host
with which this Peer component allows communication. This
address must correspond with the encapsulation address type. Thus
in the case of IP, it will contain a IP address.rw AsciiString .1.3.6.1.4.1.562.36.2.1.90.2.10.1.2 |
mscX25DtePeerX25AddressThis attribute specifies the X.25 address that identifies the remote
host with which this Peer component allows communication. The
remote X.25 interface could be subdivided through the use of
RemoteGroup components; in which case this x25Address is the
X.25 address of the destination's RemoteGroup (not to be confused
with the RemoteGroup indicated by the linkToRemoteGroup
attribute of THIS Peer component).rw DigitString .1.3.6.1.4.1.562.36.2.1.90.2.10.1.3 |
mscX25DtePeerLinkToRemoteGroupThis is a link to a RemoteGroup component. The RemoteGroup
components logically divide up the X.25 Interface such that a
number of Protocol Ports (and consequently a number of Virtual
Routers) may share the same X.25 Interface into a Wide Area
Network. In particular, the remote host identified by this Peer
component is designated as belonging to the RemoteGroup linked
by this attribute. The set of all Peer components and PermLcn
components which link to a given RemoteGroup determine the
subset of remote hosts which are accessible to a particular Protocol
Port (and ultimately a Virtual Router).rw Link .1.3.6.1.4.1.562.36.2.1.90.2.10.1.4 |
mscX25DtePeerCpTableThis group contains the call parameters used to establish a call to/
from the remote host identified by this Peer component SEQUENCE OF MscX25DtePeerCpEntry .1.3.6.1.4.1.562.36.2.1.90.2.12 |
mscX25DtePeerCpEntryAn entry in the mscX25DtePeerCpTable. MscX25DtePeerCpEntry .1.3.6.1.4.1.562.36.2.1.90.2.12.1 |
mscX25DtePeerInPacketSizeThis attribute specifies the default maximum receive packet size in
octets. A setting of 0 indicates the inPacketSize setting for the X.25
interface (in X25Dte component) is used during call setup to the
remote host identified by this Peer component.rw Unsigned32 (0 | 16 | 32 | 64 | 128 | 256 | 512 | 1024 | 2048 | 4096) .1.3.6.1.4.1.562.36.2.1.90.2.12.1.1 |
mscX25DtePeerOutPacketSizeThis attribute specifies the default maximum transmit packet size in
octets. A setting of 0 indicates the outPacketSize setting for the
X.25 interface (in the X25Dte component) is used during call setup
to the remote host identified by this Peer component.rw Unsigned32 (0 | 16 | 32 | 64 | 128 | 256 | 512 | 1024 | 2048 | 4096) .1.3.6.1.4.1.562.36.2.1.90.2.12.1.2 |
mscX25DtePeerInWindowSizeThis attribute specifies the default receive window size. A window
size of 0 indicates the inWindowSize setting for the X.25 interface
(in the X25Dte component) is used during call setup to the remote
host identified by this Peer component. A window size greater than
7 is only valid when the packetSequencing attribute of the X25Dte
component is set to modulo128.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.90.2.12.1.3 |
mscX25DtePeerOutWindowSizeThis attribute specifies the default transmit window size. A window
size of 0 indicates the outWindowSize setting for the X.25 interface
is used during call setup to the Peer identified by this component. A
window size greater than 7 is only valid when the packetSequencing
attribute of the X25Dte component is set to modulo128.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.90.2.12.1.4 |
mscX25DtePeerAcceptReverseChargingThis attribute specifies whether the local end will accept or refuse
charges for a call from the remote host identified by this Peer
component. A value of default indicates the use of the
acceptReverseCharging value from the X25Dte component. If the
value at the X25Dte level is neverAccept, a value of accept in this
Peer component will be ignored because no reverse charge calls are
to be accepted by this X.25 Dte.rw Enumeration .1.3.6.1.4.1.562.36.2.1.90.2.12.1.5 |
mscX25DtePeerProposeReverseChargingThis attribute specifies whether local/reverse charging is signalled
in a call request packet. A value of default indicates the use of the
value from the proposeReverseCharging attribute of the X25Dte
component.rw Enumeration .1.3.6.1.4.1.562.36.2.1.90.2.12.1.6 |
mscX25DtePeerOutThroughputClassSizeThis attribute specifies the value of the transmit throughput class to
be negotiated. A value of default indicates the use of the value from
the outThroughputClassSize attribute of the X25Dte component. A
value of notSpecified means the facility is not signalled.rw Enumeration .1.3.6.1.4.1.562.36.2.1.90.2.12.1.8 |
mscX25DtePeerInThroughputClassSizeThis attribute specifies the value of the receive throughput class to
be negotiated. A value of default indicates the use of the value from
the inThroughputClassSize attribute of the X25Dte component. A
value of notSpecified means the facility is not signalled.rw Enumeration .1.3.6.1.4.1.562.36.2.1.90.2.12.1.9 |
mscX25DtePeerCugIndexThis attribute specifies the index of the Closed User Group facility
to signal. A value of 'DEF' indicates the use of the value from the
cugIndex attribute of the X25Dte component. A value of null
(empty string) indicates no CUG facility is to be signalled. If a
cugIndex is provisioned to be signalled, the cugoaIndex attribute
must be null.rw AsciiString .1.3.6.1.4.1.562.36.2.1.90.2.12.1.10 |
mscX25DtePeerCugoaIndexThis attribute specifies the index of the Closed User Group with
Outgoing Access facility to signal. A value of 'DEF' indicates the
use of the value from the cugoaIndex attribute of the X25Dte
component. A value of null (empty string) indicates no CUGOA
facility is to be signalled. If a cugoaIndex is provisioned to be
signalled, the cugIndex attribute must be null.rw AsciiString .1.3.6.1.4.1.562.36.2.1.90.2.12.1.11 |
mscX25DtePeerNetworkUserIdentifierThis attribute specifies the Network User Identifier facility to signal.
A value of null (empty string) indicates no NUI facility is to be
signalled.rw HexString .1.3.6.1.4.1.562.36.2.1.90.2.12.1.12 |
mscX25DtePeerChargingInformationThis attribute specifies whether the charging information facility is
signalled in the call request packet. A value of default indicates the
use of the value from the chargingInformation attribute of the
X25Dte component. A value of notSpecified means the facility is
not signalled. A value of notRequested means the facility is
signalled but charging information is not requested (that is, the
charging info field of the facility is set Off). A value of requested
means the facility is signalled to explicitly request charging
information.rw Enumeration .1.3.6.1.4.1.562.36.2.1.90.2.12.1.13 |
mscX25DtePeerRpoaThis attribute specifies the RPOA facility to signal in a call request
packet. A value of 'DEF' indicates the use of the value from the
rpoa attribute of the X25Dte component. A value of null (empty
string) indicates no RPOA facility is to be signalled.rw AsciiString .1.3.6.1.4.1.562.36.2.1.90.2.12.1.14 |
mscX25DtePeerTrnstDlySlctnAIndThis attribute specifies the value of the Transit Delay Selection and
Indication facility to signal in a call request packet. A value of
65536 indicates no facility is signalled. A value of 65537 indicates
the use of the value from the trnstDlySlctnAInd attribute of the
X25Dte component.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.90.2.12.1.15 |
mscX25DtePeerCallingNetworkFaxThis attribute specifies the Calling Network facilities to signal in a
call request packet. The facilities are encoded here exactly as they
are encoded in the call packet. These facilities do not include the
marker facility code. A value of null (empty string) indicates the
callingNetworkFax from the X25Dte are to be signalled. If that
value is also null, no Calling Network Facilities are signalled.rw HexString .1.3.6.1.4.1.562.36.2.1.90.2.12.1.24 |
mscX25DtePeerCalledNetworkFaxThis attribute specifies the Called Network facilities to signal in a
call request packet. The facilities are encoded here exactly as they
are encoded in the call packet. These facilities do not include the
marker facility code. A value of null (empty string) indicates the
calledNetworkFax from the X25Dte are to be signalled. If that value
is also null, no Called Network Facilities are signalled.rw HexString .1.3.6.1.4.1.562.36.2.1.90.2.12.1.25 |
mscX25DtePeerCallUserDataThis attribute specifies the user data to signal in a call request
packet. A value of null (empty string) indicates that the
callUserData from the X25Dte is to be signalled. If callUserData of
the X25Dte component is also null and protocolEncType of this
Peer has the value IP, H.CC will be signalled as the call user data of
a call request packet. Thus for IP encapsulation according to
RFC1356, both the callUserData from the Peer and X25Dte
components must be null and the protocolEncType set to IP.ro HexString .1.3.6.1.4.1.562.36.2.1.90.2.12.1.26 |
mscX25DtePeerPEncTableEach instance of this replicated attribute describes an encapsulation
method permitted for encapsulating the protocol data units (PDUs)
of an upper layer protocol when communicating with the remote
host identified by this Peer component. The index of a given
replicated instance of this attribute represents the relative priority of
the encapsulation method specified by the given attribute instance.
An attribute with index '1' has the highest priority, so the
encapsulation method described by it will be the first one attempted
when signalling a call to the link. If the protocolEncType is set to
IP to encapsulate IP traffic according to RFC1356, the
callUserData for this Peer component and the X25Dte component
must both be null, so that H.CC will be signalled as the call user
data of the call request. This indicates that the protocol
encapsulation type of IP is to be used for the channel.
A call received from the link will be accepted as long as the
encapsulation method indicated in the call user data of the incoming
call packet is included in one of these replicated attributes. (This
presupposes that the incoming call has been directed to the
RemoteGroup to which this Peer is linked through the
linkToRemoteGroup attribute.) SEQUENCE OF MscX25DtePeerPEncEntry .1.3.6.1.4.1.562.36.2.1.90.2.208 |
mscX25DtePeerPEncEntryAn entry in the mscX25DtePeerPEncTable. MscX25DtePeerPEncEntry .1.3.6.1.4.1.562.36.2.1.90.2.208.1 |
mscX25DtePeerPEncIndexThis variable represents the index for the mscX25DtePeerPEncTable. Integer32 .1.3.6.1.4.1.562.36.2.1.90.2.208.1.1 |
mscX25DtePeerPEncValueThis variable represents an individual value for the
mscX25DtePeerPEncTable.rw Enumeration .1.3.6.1.4.1.562.36.2.1.90.2.208.1.2 |
mscX25DtePeerPEncRowStatusThis variable is used to control the addition and deletion
of individual values of the mscX25DtePeerPEncTable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.90.2.208.1.3 |
mscX25DtePeerLcnTableThis attribute specifies the local logical channel numbers (Lcn) in
use for the X.25 calls to the remote host identified by this Peer
component. SEQUENCE OF MscX25DtePeerLcnEntry .1.3.6.1.4.1.562.36.2.1.90.2.209 |
mscX25DtePeerLcnEntryAn entry in the mscX25DtePeerLcnTable. MscX25DtePeerLcnEntry .1.3.6.1.4.1.562.36.2.1.90.2.209.1 |
mscX25DtePeerLcnValueThis variable represents both the value and the index for the
mscX25DtePeerLcnTable.ro Integer32 .1.3.6.1.4.1.562.36.2.1.90.2.209.1.1 |
mscX25DtePLcn OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.90.3 |
mscX25DtePLcnRowStatusTableThis entry controls the addition and deletion of
mscX25DtePLcn components. SEQUENCE OF MscX25DtePLcnRowStatusEntry .1.3.6.1.4.1.562.36.2.1.90.3.1 |
mscX25DtePLcnRowStatusEntryA single entry in the table represents a single
mscX25DtePLcn component. MscX25DtePLcnRowStatusEntry .1.3.6.1.4.1.562.36.2.1.90.3.1.1 |
mscX25DtePLcnRowStatusThis variable is used as the basis for SNMP naming of
mscX25DtePLcn components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.90.3.1.1.1 |
mscX25DtePLcnComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.90.3.1.1.2 |
mscX25DtePLcnStorageTypeThis variable represents the storage type value for the
mscX25DtePLcn tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.90.3.1.1.4 |
mscX25DtePLcnIndexThis variable represents the index for the mscX25DtePLcn tables. Integer32 .1.3.6.1.4.1.562.36.2.1.90.3.1.1.10 |
mscX25DtePLcnProvTableThis group contains the provisionable parameters for the permanent
logical channels (PLcns) on the X.25 interface (corresponding to
Permanent Virtual Circuits (PVCs) provisioned on the Wide Area
Network). SEQUENCE OF MscX25DtePLcnProvEntry .1.3.6.1.4.1.562.36.2.1.90.3.10 |
mscX25DtePLcnProvEntryAn entry in the mscX25DtePLcnProvTable. MscX25DtePLcnProvEntry .1.3.6.1.4.1.562.36.2.1.90.3.10.1 |
mscX25DtePLcnEncAddressTypeThis attribute specifies the encapsulation type for the address of the
remote host with which this Peer component allows
communication.rw Enumeration .1.3.6.1.4.1.562.36.2.1.90.3.10.1.1 |
mscX25DtePLcnEncAddressThis attribute specifies the encapsulation address of the remote host
with which this PermLcn component defines a connectionrw AsciiString .1.3.6.1.4.1.562.36.2.1.90.3.10.1.2 |
mscX25DtePLcnProtocolEncTypeThis attribute specifies the encapsulation method to use when
exchanging protocol data units (PDUs) over this channel. IP and
Null protocolEncTypes are as defined in RFC1356.
NscNull is an encapsulation method for carrying IP datagrams
which requires removing 3 padding octets of zeroes and the
protocol identifier H.CC from the front of each data packet received
from the link in order to obtain the PDU. PDUs sent to the link are
propounded by a the protocol identifier H.CC. NscNull should only
be set when the remote host is following this same encapsulation
method.rw Enumeration .1.3.6.1.4.1.562.36.2.1.90.3.10.1.3 |
mscX25DtePLcnLinkToRemoteGroupThis attribute specifies the link to the RemoteGroup, indicating the
RemoteGroup component with which this PermLcn component is
associated. The RemoteGroup components logically divide up the
X.25 Interface such that a number of Protocol Ports (and
consequently a number of Virtual Routers) may share the same
X.25 Interface into a Wide Area Network. In particular, the remote
host identified by this PermLcn component is designated as
belonging to the RemoteGroup linked by this attribute. The set of all
PermLcn and Peer components which link to a given RemoteGroup
determine the subset of remote hosts which are accessible to a
particular Protocol Port (and ultimately a Virtual Router).rw Link .1.3.6.1.4.1.562.36.2.1.90.3.10.1.4 |
mscX25DtePLcnInPacketSizeThis attribute specifies the maximum receive packet size in octets.rw Unsigned32 (16 | 32 | 64 | 128 | 256 | 512 | 1024 | 2048 | 4096) .1.3.6.1.4.1.562.36.2.1.90.3.10.1.5 |
mscX25DtePLcnOutPacketSizeThis attribute specifies the maximum transmit packet size in octets.rw Unsigned32 (16 | 32 | 64 | 128 | 256 | 512 | 1024 | 2048 | 4096) .1.3.6.1.4.1.562.36.2.1.90.3.10.1.6 |
mscX25DtePLcnInWindowSizeThis attribute specifies the maximum receive window size. A
inWindowSize greater than 7 is only valid when the
packetSequencing attribute of the X25Dte component is set to
modulo128.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.90.3.10.1.7 |
mscX25DtePLcnOutWindowSizeThis attribute specifies the maximum transmit window size. A
outWindowSize greater than 7 is only valid when the
packetSequencing attribute of the X25Dte component is set to
modulo128.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.90.3.10.1.8 |
mscX25DteLcn OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.90.4 |
mscX25DteLcnRowStatusTable*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This entry controls the addition and deletion of
mscX25DteLcn components. SEQUENCE OF MscX25DteLcnRowStatusEntry .1.3.6.1.4.1.562.36.2.1.90.4.1 |
mscX25DteLcnRowStatusEntryA single entry in the table represents a single
mscX25DteLcn component. MscX25DteLcnRowStatusEntry .1.3.6.1.4.1.562.36.2.1.90.4.1.1 |
mscX25DteLcnRowStatusThis variable is used as the basis for SNMP naming of
mscX25DteLcn components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.90.4.1.1.1 |
mscX25DteLcnComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.90.4.1.1.2 |
mscX25DteLcnStorageTypeThis variable represents the storage type value for the
mscX25DteLcn tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.90.4.1.1.4 |
mscX25DteLcnIndexThis variable represents the index for the mscX25DteLcn tables. Integer32 .1.3.6.1.4.1.562.36.2.1.90.4.1.1.10 |
mscX25DteLcnStateTable*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. SEQUENCE OF MscX25DteLcnStateEntry .1.3.6.1.4.1.562.36.2.1.90.4.10 |
mscX25DteLcnStateEntryAn entry in the mscX25DteLcnStateTable. MscX25DteLcnStateEntry .1.3.6.1.4.1.562.36.2.1.90.4.10.1 |
mscX25DteLcnAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.90.4.10.1.1 |
mscX25DteLcnOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.ro Enumeration .1.3.6.1.4.1.562.36.2.1.90.4.10.1.2 |
mscX25DteLcnUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.ro Enumeration .1.3.6.1.4.1.562.36.2.1.90.4.10.1.3 |
mscX25DteLcnCpTable*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This group contains the call parameters that are in use for this
logical channel. For a PVC only the packet size and the window
size attributes are meaningful. SEQUENCE OF MscX25DteLcnCpEntry .1.3.6.1.4.1.562.36.2.1.90.4.11 |
mscX25DteLcnCpEntryAn entry in the mscX25DteLcnCpTable. MscX25DteLcnCpEntry .1.3.6.1.4.1.562.36.2.1.90.4.11.1 |
mscX25DteLcnInPacketSizeThis attribute indicates the maximum receive packet size in octets.ro Unsigned32 (16 | 32 | 64 | 128 | 256 | 512 | 1024 | 2048 | 4096) .1.3.6.1.4.1.562.36.2.1.90.4.11.1.1 |
mscX25DteLcnOutPacketSizeThis attribute indicates the maximum transmit packet size in octets.ro Unsigned32 (16 | 32 | 64 | 128 | 256 | 512 | 1024 | 2048 | 4096) .1.3.6.1.4.1.562.36.2.1.90.4.11.1.2 |
mscX25DteLcnInWindowSizeThis attribute indicates the receive window size.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.90.4.11.1.3 |
mscX25DteLcnOutWindowSizeThis attribute indicates the transmit window size.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.90.4.11.1.4 |
mscX25DteLcnProposeReverseChargingSpecifies whether local/reverse charging was negotiated for this
logical channel. To determine which end of the channel is paying
for the call, this attribute must be examined in combination with the
callDirection attribute. For example, if this attribute is set to reverse
and the callDirection attribute indicates incoming, it means the
incoming call signalled reverse charging, so the local end of the
channel is being charged. On the other, if the value of this attribute
is reverse and the callDirection is outgoing, it means that the call
request sent to the link signalled reverse charging; so the remote end
is charged. Similarly, a value of local must also be interpreted in
combination with the callDirection to determine which end is being
charged. If the value of the callDirection attribute is plcn, the
proposeReverseCharging attribute is meaningless.ro Enumeration .1.3.6.1.4.1.562.36.2.1.90.4.11.1.5 |
mscX25DteLcnFastSelectThis attribute indicates whether the fast select was used in
establishing this logical channel.ro Enumeration .1.3.6.1.4.1.562.36.2.1.90.4.11.1.6 |
mscX25DteLcnOutThroughputClassSizeThis attribute specifies the transmit throughput class.ro Enumeration .1.3.6.1.4.1.562.36.2.1.90.4.11.1.7 |
mscX25DteLcnInThroughputClassSizeThis attribute specifies the receive throughput class.ro Enumeration .1.3.6.1.4.1.562.36.2.1.90.4.11.1.8 |
mscX25DteLcnCugIndexThis attribute indicates the index of the Closed User Group facility
used in establishing this logical channel.ro AsciiString .1.3.6.1.4.1.562.36.2.1.90.4.11.1.9 |
mscX25DteLcnCugoaIndexThis attribute indicates the index of the Closed User Group with
Outgoing Access facility used in establishing this logical channel.ro AsciiString .1.3.6.1.4.1.562.36.2.1.90.4.11.1.10 |
mscX25DteLcnNetworkUserIdentifierSpecifies the Network User Identifier used for this logical channel.ro HexString .1.3.6.1.4.1.562.36.2.1.90.4.11.1.11 |
mscX25DteLcnChargingInformationThis attribute indicates whether or not the charging information
facility was used in establishing this logical channel. A value of
notSpecified means the facility was not signalled. A value of
notRequested means the facility was signalled but charging
information was not requested (that is, the charging info field of the
facility was set Off). A value of requested means the facility was
signalled to explicitly request charging information.
DESCRIPTIONro Enumeration .1.3.6.1.4.1.562.36.2.1.90.4.11.1.12 |
mscX25DteLcnRpoaThis attribute indicates the RPOA facility which was signalled in
establishing this logical channel.ro AsciiString .1.3.6.1.4.1.562.36.2.1.90.4.11.1.13 |
mscX25DteLcnTrnstDlySlctnAIndThis attribute indicates the Transit Delay Selection and Indication
value used for this logical channel. A value of 65536 means no
facility was signalled.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.90.4.11.1.14 |
mscX25DteLcnCallingNetworkFaxThis attribute indicates the Calling Network facilities which were
signalled in the call packet. A value of null (empty string) means no
calling network facilities were signalled.ro HexString .1.3.6.1.4.1.562.36.2.1.90.4.11.1.23 |
mscX25DteLcnCalledNetworkFaxThis attribute indicates the called network facilities which were
signalled in the call packet. A value of null (empty string) means no
called network facilities were signalled.ro HexString .1.3.6.1.4.1.562.36.2.1.90.4.11.1.24 |
mscX25DteLcnCallUserDataThis attribute indicates the user data which was signalled in the call
packet. A value of null (empty string) means no user data was
signalled.ro HexString .1.3.6.1.4.1.562.36.2.1.90.4.11.1.25 |
mscX25DteLcnLcnStatusTable*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This group contains the status for an X.25 Logical Channel. SEQUENCE OF MscX25DteLcnLcnStatusEntry .1.3.6.1.4.1.562.36.2.1.90.4.12 |
mscX25DteLcnLcnStatusEntryAn entry in the mscX25DteLcnLcnStatusTable. MscX25DteLcnLcnStatusEntry .1.3.6.1.4.1.562.36.2.1.90.4.12.1 |
mscX25DteLcnStatusThis attribute indicates the current state of the logical channel.ro Enumeration .1.3.6.1.4.1.562.36.2.1.90.4.12.1.1 |
mscX25DteLcnCallDirectionThis attribute indicates the direction of the call that caused the
establishment of this channel.ro Enumeration .1.3.6.1.4.1.562.36.2.1.90.4.12.1.3 |
mscX25DteLcnCalledAddressThis attribute indicates the called X.25 address to which the call is
established.ro DigitString .1.3.6.1.4.1.562.36.2.1.90.4.12.1.4 |
mscX25DteLcnCallingAddressThis attribute indicates the calling X.25 address from which the call
originatedro DigitString .1.3.6.1.4.1.562.36.2.1.90.4.12.1.5 |
mscX25DteLcnOriginalCalledAddressThis attribute indicates the X.25 address of the originally called
DTE to which the call was attempted. This could be different from
the value of the calledAddress attribute in the case where the
original call was redirected.ro DigitString .1.3.6.1.4.1.562.36.2.1.90.4.12.1.6 |
mscX25DteLcnStatsTable*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This group contains the operational statistics for an X.25 Logical
Channel. SEQUENCE OF MscX25DteLcnStatsEntry .1.3.6.1.4.1.562.36.2.1.90.4.13 |
mscX25DteLcnStatsEntryAn entry in the mscX25DteLcnStatsTable. MscX25DteLcnStatsEntry .1.3.6.1.4.1.562.36.2.1.90.4.13.1 |
mscX25DteLcnInUknownProtocolsThis attribute counts the number packets received from link which
were discareded because of an unkown or unsupported protocols.ro Counter32 .1.3.6.1.4.1.562.36.2.1.90.4.13.1.1 |
mscX25DteLcnInDataOctetsThis attribute counts the number of octets of user data received from
the link.ro Counter32 .1.3.6.1.4.1.562.36.2.1.90.4.13.1.2 |
mscX25DteLcnInDataPacketsThis attribute counts the number of data packets received from the
link.ro Counter32 .1.3.6.1.4.1.562.36.2.1.90.4.13.1.3 |
mscX25DteLcnInRmtInitiatedRstsThis attribute counts the number of reset packets, with a cause code
of 'DTE initiated', which were received from the linkro Counter32 .1.3.6.1.4.1.562.36.2.1.90.4.13.1.4 |
mscX25DteLcnInPrvdrInitiatedRstsThis attribute counts the number of reset packets, with a cause code
other than 'DTE initiated', which were received from the link.ro Counter32 .1.3.6.1.4.1.562.36.2.1.90.4.13.1.5 |
mscX25DteLcnInInterruptPacketsThis attribute counts the number of interrupt packets received from
the link.ro Counter32 .1.3.6.1.4.1.562.36.2.1.90.4.13.1.6 |
mscX25DteLcnOutDataOctetsThis attribute counts the number of octets of user data sent to the
link.ro Counter32 .1.3.6.1.4.1.562.36.2.1.90.4.13.1.7 |
mscX25DteLcnOutDataPacketsThis attribute counts the number of data packets sent to link.ro Counter32 .1.3.6.1.4.1.562.36.2.1.90.4.13.1.8 |
mscX25DteLcnOutInterruptPacketsThis attribute counts the number of interrupt packets sent to link.ro Counter32 .1.3.6.1.4.1.562.36.2.1.90.4.13.1.9 |
mscX25DteLcnT22ResetTimeoutsThis attribute counts the number of times the t22 reset timer has
expired.ro Counter32 .1.3.6.1.4.1.562.36.2.1.90.4.13.1.10 |
mscX25DteLapb OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.90.5 |
mscX25DteLapbRowStatusTableThis entry controls the addition and deletion of
mscX25DteLapb components. SEQUENCE OF MscX25DteLapbRowStatusEntry .1.3.6.1.4.1.562.36.2.1.90.5.1 |
mscX25DteLapbRowStatusEntryA single entry in the table represents a single
mscX25DteLapb component. MscX25DteLapbRowStatusEntry .1.3.6.1.4.1.562.36.2.1.90.5.1.1 |
mscX25DteLapbRowStatusThis variable is used as the basis for SNMP naming of
mscX25DteLapb components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.90.5.1.1.1 |
mscX25DteLapbComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.90.5.1.1.2 |
mscX25DteLapbStorageTypeThis variable represents the storage type value for the
mscX25DteLapb tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.90.5.1.1.4 |
mscX25DteLapbIndexThis variable represents the index for the mscX25DteLapb tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.90.5.1.1.10 |
mscX25DteLapbCpTableX25Dte/n Lapb
This group contains the set of configuration parameters for the
LAPB interface. SEQUENCE OF MscX25DteLapbCpEntry .1.3.6.1.4.1.562.36.2.1.90.5.10 |
mscX25DteLapbCpEntryAn entry in the mscX25DteLapbCpTable. MscX25DteLapbCpEntry .1.3.6.1.4.1.562.36.2.1.90.5.10.1 |
mscX25DteLapbStationTypeThis attribute specifies the DCE or the DTE role of operation for the
LAPB interface. Changing this attribute will cause the lapb link to
Reset.rw Enumeration .1.3.6.1.4.1.562.36.2.1.90.5.10.1.1 |
mscX25DteLapbFrameSequencingThis attribute specifies the modulo of the frame sequence
numbering of the LAPB interface. Changing this attribute will cause
the lapb link to Reset.rw Enumeration .1.3.6.1.4.1.562.36.2.1.90.5.10.1.2 |
mscX25DteCidDataTableThis group contains the attribute for a component's Customer
Identifier (CID). Refer to the attribute description for a detailed
explanation of CIDs. SEQUENCE OF MscX25DteCidDataEntry .1.3.6.1.4.1.562.36.2.1.90.20 |
mscX25DteCidDataEntryAn entry in the mscX25DteCidDataTable. MscX25DteCidDataEntry .1.3.6.1.4.1.562.36.2.1.90.20.1 |
mscX25DteCustomerIdentifierThis attribute holds the Customer Identifier (CID).
Every component has a CID. If a component has a cid attribute, the
component's CID is the provisioned value of that attribute;
otherwise the component inherits the CID of its parent. The top-
level component has a CID of 0.
Every operator session also has a CID, which is the CID
provisioned for the operator's user ID. An operator will see only the
stream data for components having a matching CID. Also, the
operator will be allowed to issue commands for only those
components which have a matching CID.
An operator CID of 0 is used to identify the Network Manager
(referred to as 'NetMan' in DPN). This CID matches the CID of
any component. Values 1 to 8191 inclusive (equivalent to 'basic
CIDs' in DPN) may be assigned to specific customers.rw Unsigned32 (0 | 1..8191) .1.3.6.1.4.1.562.36.2.1.90.20.1.1 |
mscX25DteIfTableThis group provides the administrative set of parameters for the
X.25 interface. SEQUENCE OF MscX25DteIfEntry .1.3.6.1.4.1.562.36.2.1.90.21 |
mscX25DteIfEntryAn entry in the mscX25DteIfTable. MscX25DteIfEntry .1.3.6.1.4.1.562.36.2.1.90.21.1 |
mscX25DteInterfaceModeThis attribute specifies the packet mode in which the X.25 interface
operates. When this attribute is set to dte, interface on the other side
of the physical link must be configured as a dce.ro Enumeration .1.3.6.1.4.1.562.36.2.1.90.21.1.1 |
mscX25DteMaxActiveChannelsThis attribute specifies the maximum number of channels that can
be active on this interface including the Permanent Lcns and the
Switched Lcns. In total maxActiveChannel will determine the
maximum number of Lcn components which may exist at a given
time. This should be set to a value greater or equal to the
numberOfPLcn provisioned.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.90.21.1.2 |
mscX25DteNumberOfPLcnThis attribute specifies the number of Permanent Logical Channels
that are supported on this X.25 interface (that is, the number of
PermLcn components that may be provisioned at this interface).
The PermLcn components use channel numbers starting from 1 and
up to lowestILChannelNumber.
A value of 0 for this attribute indicates that no Permanent Logical
channels are supported on this X.25 interface.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.90.21.1.3 |
mscX25DtePacketSequencingThis attribute specifies the sequence numbering of packets for the
X.25 interface. The value of this attribute must be the same as the
packet sequencing configured at the X.25 interface on the other side
of the physical link.rw Enumeration .1.3.6.1.4.1.562.36.2.1.90.21.1.4 |
mscX25DteT20RestartTimerThis attribute provides the period in milliseconds within which a
restart request packet should be confirmed.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.90.21.1.5 |
mscX25DteT21CallTimerThis attribute provides the period in milliseconds within which a
call request packet should be confirmed.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.90.21.1.6 |
mscX25DteT22ResetTimerThis attribute provides the period in milliseconds within which a
reset request packet should be confirmed.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.90.21.1.7 |
mscX25DteT23ClearTimerThis attribute provides the period in milliseconds within which a
clear request packet should be confirmed.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.90.21.1.8 |
mscX25DteLcnCTableThis group contains the provisionable attributes for the Logical
Channel configuration of the X.25 Interface. The logical channel
range table is ordered as follows:
Permanent Logical Channels(PLC),
One-way Incoming Channels (IC),
Two-way Channels(TC) and
One-way Outgoing Channels (OC),
in a consecutive manner. SEQUENCE OF MscX25DteLcnCEntry .1.3.6.1.4.1.562.36.2.1.90.22 |
mscX25DteLcnCEntryAn entry in the mscX25DteLcnCTable. MscX25DteLcnCEntry .1.3.6.1.4.1.562.36.2.1.90.22.1 |
mscX25DteLowestILChannelNumberThis attribute specifies the lowest Lcn number of the One-way
Incoming Channel range for this X.25 interface. The value for this
attribute must be greater than the numberOfPLcn attribute.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.90.22.1.1 |
mscX25DteHighestILChannelNumberThis attribute specifies the highest Lcn number of the One-way
Incoming Channel range for this X.25 interface. A value of 0
indicates that there are no channels in this range.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.90.22.1.2 |
mscX25DteLowestTLChannelNumberThis attribute specifies the lowest Lcn number of the Two-way
Channel range for this X.25 interface. The value for this attribute
must be greater than the highestILChannelNumber attribute.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.90.22.1.3 |
mscX25DteHighestTLChannelNumberThis attribute specifies the highest Lcn number of the Two-way
Channel range for this X.25 interface. A value of 0 indicates that
there are no channels in this range.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.90.22.1.4 |
mscX25DteLowestOLChannelNumberThis attribute specifies the lowest Lcn number of the One-way
Outgoing Channel range for this X.25 interface. The value for this
attribute must be greater than the highestTLChannelNumber
attribute.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.90.22.1.5 |
mscX25DteHighestOLChannelNumberThis attribute specifies the highest Lcn number of the One-way
Outgoing Channel range for this X.25 interface. A value of 0
indicates that there are no channels in this range.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.90.22.1.6 |
mscX25DteDcpTableThis group contains the provisionable attributes giving the default
call parameters used by all the logical channels during call setup. It
is possible that different default call parameters will be used for a
particular call, based on the Peer component for the given call. The
actual call parameters operational for a given call are found in the
Lcn component. SEQUENCE OF MscX25DteDcpEntry .1.3.6.1.4.1.562.36.2.1.90.23 |
mscX25DteDcpEntryAn entry in the mscX25DteDcpTable. MscX25DteDcpEntry .1.3.6.1.4.1.562.36.2.1.90.23.1 |
mscX25DteInPacketSizeThis attribute specifies the maximum receive packet size in octets
for the X.25 interface.rw Unsigned32 (16 | 32 | 64 | 128 | 256 | 512 | 1024 | 2048 | 4096) .1.3.6.1.4.1.562.36.2.1.90.23.1.1 |
mscX25DteOutPacketSizeThis attribute specifies the maximum transmit packet size in octets
for the X.25 interface.rw Unsigned32 (16 | 32 | 64 | 128 | 256 | 512 | 1024 | 2048 | 4096) .1.3.6.1.4.1.562.36.2.1.90.23.1.2 |
mscX25DteInWindowSizeThis attribute specifies the maximum receive window size for the
X.25 interface. A window size greater than 7 is only valid when the
packetSequencing attribute is set to modulo128.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.90.23.1.3 |
mscX25DteOutWindowSizeThis attribute specifies the maximum transmit window size for the
X.25 interface. A window size greater than 7 is only valid when the
packetSequencing is set to modulo128.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.90.23.1.4 |
mscX25DteAcceptReverseChargingThis attribute specifies whether local end will accept or refuse
charges for a call. A value of neverAccept is only used at the X.25
interface level and indicates that this interface will never accept
reverse charging (that is no Peer component can override this
parameter, allowing reverse charged calls to be accepted).rw Enumeration .1.3.6.1.4.1.562.36.2.1.90.23.1.5 |
mscX25DteProposeReverseChargingThis attribute specifies whether local/reverse charging is signalled
in the call request packet.rw Enumeration .1.3.6.1.4.1.562.36.2.1.90.23.1.6 |
mscX25DteOutThroughputClassSizeThis attribute specifies the value of the transmit throughput class to
be negotiated. A value of notSpecified means the facility is not
signalled.rw Enumeration .1.3.6.1.4.1.562.36.2.1.90.23.1.8 |
mscX25DteInThroughputClassSizeThis attribute specifies the value of the receive throughput class to
be negotiated. A value of notSpecified means the facility is not
signalled.rw Enumeration .1.3.6.1.4.1.562.36.2.1.90.23.1.9 |
mscX25DteCugIndexThis attribute specifies the index of the Closed User Group facility
to signal. The index consists of two or four octets each representing
a digit in the range of 0 to 9. A value of null (empty string) at the
X.25 interface means no CUG facility is signalled. If a cugIndex is
provisioned to be signalled, the cugoaIndex attribute must be null.rw AsciiString .1.3.6.1.4.1.562.36.2.1.90.23.1.10 |
mscX25DteCugoaIndexThis attribute specifies the index of the Close User Group with
Outgoing Access facility to signal. The index consists of two or four
octets each representing a digit in the range of 0 to 9. A value of
null (empty string) at the X.25 interface means no CUGOA facility
is signalled. If a cugoaIndex is provisioned to be signalled, the
cugIndex attribute must be null.rw AsciiString .1.3.6.1.4.1.562.36.2.1.90.23.1.11 |
mscX25DteChargingInformationThis attribute specifies whether the charging information facility is
to be signalled in a call request packet. A value of notSpecified
means the facility is not signalled. A value of notRequested means
the facility is signalled but charging information is not requested
(that is, the charging info field of the facility is set Off). A value of
requested means the facility is signalled to explicitly request
charging information.rw Enumeration .1.3.6.1.4.1.562.36.2.1.90.23.1.13 |
mscX25DteRpoaThis attribute specifies the value of the RPOA facility to signal in a
call request packet. The value of null (empty string) at the X.25
interface means no RPOA facility is signalled.rw AsciiString .1.3.6.1.4.1.562.36.2.1.90.23.1.14 |
mscX25DteTrnstDlySlctnAIndThis attribute specifies the value of the Transit Delay Selection and
Indication facility to signal in a call request packet. A value of
65536 at the X.25 interface level means no TDSAI facility is
signalled.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.90.23.1.15 |
mscX25DteCallingNetworkFaxThis attribute specifies the Calling Network facilities to be signalled
in a call request packet. A value of null (empty string) at the X.25
interface means no facilities are signalled.rw HexString .1.3.6.1.4.1.562.36.2.1.90.23.1.24 |
mscX25DteCalledNetworkFaxThis attribute specifies the called network facilities to be signalled
in a call request packet. A value of null (empty string) at the X.25
interface means no facilities are signalled.rw HexString .1.3.6.1.4.1.562.36.2.1.90.23.1.25 |
mscX25DteCallUserDataThis attribute specifies the user data to be signalled in the call
request packet. A value of null (empty string) means no user data is
signalled.ro HexString .1.3.6.1.4.1.562.36.2.1.90.23.1.26 |
mscX25DteIfEntryTableThis group contains the provisionable attributes for the ifEntry. SEQUENCE OF MscX25DteIfEntryEntry .1.3.6.1.4.1.562.36.2.1.90.24 |
mscX25DteIfEntryEntryAn entry in the mscX25DteIfEntryTable. MscX25DteIfEntryEntry .1.3.6.1.4.1.562.36.2.1.90.24.1 |
mscX25DteIfAdminStatusThe desired state of the interface. The up state indicates the
interface is operational. The down state indicates the interface is not
operational. The testing state indicates that no operational packets
can be passed.rw Enumeration .1.3.6.1.4.1.562.36.2.1.90.24.1.1 |
mscX25DteIfIndexThis is the index for the IfEntry. Its value is automatically initialized
during the provisioning process.ro InterfaceIndex .1.3.6.1.4.1.562.36.2.1.90.24.1.2 |
mscX25DteStateTableThis group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. SEQUENCE OF MscX25DteStateEntry .1.3.6.1.4.1.562.36.2.1.90.25 |
mscX25DteStateEntryAn entry in the mscX25DteStateTable. MscX25DteStateEntry .1.3.6.1.4.1.562.36.2.1.90.25.1 |
mscX25DteAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.90.25.1.1 |
mscX25DteOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.ro Enumeration .1.3.6.1.4.1.562.36.2.1.90.25.1.2 |
mscX25DteUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.ro Enumeration .1.3.6.1.4.1.562.36.2.1.90.25.1.3 |
mscX25DteOperStatusTableThis group includes the Operational Status attribute. This attribute
defines the current operational state of this component. SEQUENCE OF MscX25DteOperStatusEntry .1.3.6.1.4.1.562.36.2.1.90.26 |
mscX25DteOperStatusEntryAn entry in the mscX25DteOperStatusTable. MscX25DteOperStatusEntry .1.3.6.1.4.1.562.36.2.1.90.26.1 |
mscX25DteSnmpOperStatusThe current state of the interface. The up state indicates the
interface is operational and capable of forwarding packets. The
down state indicates the interface is not operational, thus unable to
forward packets. testing state indicates that no operational packets
can be passed.ro Enumeration .1.3.6.1.4.1.562.36.2.1.90.26.1.1 |
mscX25DteOpTableThis group contains the operational status of the X.25 interface. SEQUENCE OF MscX25DteOpEntry .1.3.6.1.4.1.562.36.2.1.90.27 |
mscX25DteOpEntryAn entry in the mscX25DteOpTable. MscX25DteOpEntry .1.3.6.1.4.1.562.36.2.1.90.27.1 |
mscX25DteInterfaceStateThis attribute specifies the state of the interface. The notReady
state, is the initial state of the service, when it is being initialized.
The localRestarting state is entered when a Restart packet is sent to
the link and the interface is waiting for a response. The
remoteRestarting state is entered when a Restart packet is received
from the link, and is being processed. In ready state, the service is
operational and ready to provide service.ro Enumeration .1.3.6.1.4.1.562.36.2.1.90.27.1.1 |
mscX25DteStatsTableThis component contains the statistics for the X.25 interface. SEQUENCE OF MscX25DteStatsEntry .1.3.6.1.4.1.562.36.2.1.90.28 |
mscX25DteStatsEntryAn entry in the mscX25DteStatsTable. MscX25DteStatsEntry .1.3.6.1.4.1.562.36.2.1.90.28.1 |
mscX25DteInCallsThis attribute counts the number of call packets received from link.ro Counter32 .1.3.6.1.4.1.562.36.2.1.90.28.1.1 |
mscX25DteInCallRefusalsThis attribute counts the number of calls received from the link
which have been cleared. This includes calls cleared by the X.25
interface and calls cleared by the higher level.ro Counter32 .1.3.6.1.4.1.562.36.2.1.90.28.1.2 |
mscX25DteInPrvdrInitiatedClrsThis attribute counts the number of clear packets received from the
link with a cause code other than DTE initiated.ro Counter32 .1.3.6.1.4.1.562.36.2.1.90.28.1.3 |
mscX25DteInRmtInitiatedRstsThis attribute counts the number of reset packets received from the
link with the cause code DTE initiated.ro Counter32 .1.3.6.1.4.1.562.36.2.1.90.28.1.4 |
mscX25DteInPrvdrInitiatedRstsThis attribute counts the number of reset packets received from the
link with the cause code other than DTE initiated.ro Counter32 .1.3.6.1.4.1.562.36.2.1.90.28.1.5 |
mscX25DteInRestartsThis attribute counts the number of restart packets received from the
link while the service is in ready state.ro Counter32 .1.3.6.1.4.1.562.36.2.1.90.28.1.6 |
mscX25DteInDataPacketsThis attribute counts the number of data packets received from link.ro Counter32 .1.3.6.1.4.1.562.36.2.1.90.28.1.7 |
mscX25DteInPktsAcusdOfPrtclErrThis attribute counts the number of clear, reset, restart and
diagnostic packets received from link containing a procedure error
cause code.ro Counter32 .1.3.6.1.4.1.562.36.2.1.90.28.1.8 |
mscX25DteInInterruptPacketsThis attributes counts the number of interrupt packets received from
link.ro Counter32 .1.3.6.1.4.1.562.36.2.1.90.28.1.9 |
mscX25DteOutCallAttemptsThis attribute counts the number of call packets sent from this
interface.ro Counter32 .1.3.6.1.4.1.562.36.2.1.90.28.1.10 |
mscX25DteOutCallFailuresThis attribute counts the number of call attempts from this interface
that failed. This includes calls that were cleared because of
restrictive fast select.ro Counter32 .1.3.6.1.4.1.562.36.2.1.90.28.1.11 |
mscX25DteOutInterruptPacketsThis attribute counts the number of interrupt packets sent to the
link.ro Counter32 .1.3.6.1.4.1.562.36.2.1.90.28.1.12 |
mscX25DteOutDataPacketsThis attribute counts the number of data packets sent to the link.ro Counter32 .1.3.6.1.4.1.562.36.2.1.90.28.1.13 |
mscX25DteOutActiveChannelsThis attribute indicates the number of One-way Outgoing Channels
that are currently in use. This counter includes the call requests that
have not been accepted.ro Counter32 .1.3.6.1.4.1.562.36.2.1.90.28.1.14 |
mscX25DteInActiveChannelsThis attribute indicates number of One-way Incoming Channels that
are currently active.ro Counter32 .1.3.6.1.4.1.562.36.2.1.90.28.1.15 |
mscX25DteTwowayActiveChannelsThis attribute indicates the number of Two-way Channels that are in
use. This includes call requests sent but not yet accepted.ro Counter32 .1.3.6.1.4.1.562.36.2.1.90.28.1.16 |
mscX25DteT20RestartTimeoutsThis attribute counts the number of times the T20 restart timer has
expired.ro Counter32 .1.3.6.1.4.1.562.36.2.1.90.28.1.17 |
mscX25DteT21CallTimeoutsThis attribute counts the number of times the T21 call timer has
expired.ro Counter32 .1.3.6.1.4.1.562.36.2.1.90.28.1.18 |
mscX25DteT22ResetTimeoutsThis attribute counts the number of times the T22 reset timer has
expired.ro Counter32 .1.3.6.1.4.1.562.36.2.1.90.28.1.19 |
mscX25DteT23ClearTimeoutsThis attribute counts the number of times the T23 clear timer has
expired.ro Counter32 .1.3.6.1.4.1.562.36.2.1.90.28.1.20 |
x25DteMIB OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.48 |
IMPORTS Unknown .1.3.6.1.4.1.562.36.2.2.48 |
x25DteGroup OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.48.1 |
x25DteGroupCA OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.48.1.1 |
x25DteGroupCA02 OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.48.1.1.3 |
x25DteGroupCA02A OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.48.1.1.3.2 |
x25DteCapabilities OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.48.3 |
x25DteCapabilitiesCA OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.48.3.1 |
x25DteCapabilitiesCA02 OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.48.3.1.3 |
x25DteCapabilitiesCA02A OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.48.3.1.3.2 |
mscX25DteLapbN1FrameSizeThis attribute specifies the maximum frame size in bits that can be
transmitted or received. This value must be greater than or equal to
the maximum packet size across the interface(in bits)+ max level 3
header size(in bits)+ max level 2 header size(in bits)+ crc in bits.
(max Pkt size + -> 4096*8
max level 3 header size +
level 2 header size + > 5*8
crc
DEFVAL { 32856 }
::= { mscX25DteLapbCpEntry 3 }
mscX25DteLapbKWindowSize OBJECT-TYPE
SYNTAX Unsigned32 (1..127)
ACCESS read-write
STATUS mandatory
DESCRIPTIONrw Unsigned32 .mscX25DteRgLcnEntry.1 |