Nortel-MsCarrier-MscPassport-VnetNisSigMIB
AI MIB Summary
Standard SNMP MIB module defining data structures for Nortel-MsCarrier-MscPassport-VnetNisSigMIB.
85
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
85 total| Object Name |
|---|
mscSigChanNis OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.115.8 |
mscSigChanNisRowStatusTableThis entry controls the addition and deletion of
mscSigChanNis components. SEQUENCE OF MscSigChanNisRowStatusEntry .1.3.6.1.4.1.562.36.2.1.115.8.1 |
mscSigChanNisRowStatusEntryA single entry in the table represents a single
mscSigChanNis component. MscSigChanNisRowStatusEntry .1.3.6.1.4.1.562.36.2.1.115.8.1.1 |
mscSigChanNisRowStatusThis variable is used as the basis for SNMP naming of
mscSigChanNis components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.115.8.1.1.1 |
mscSigChanNisComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.115.8.1.1.2 |
mscSigChanNisStorageTypeThis variable represents the storage type value for the
mscSigChanNis tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.115.8.1.1.4 |
mscSigChanNisIndexThis variable represents the index for the mscSigChanNis tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.115.8.1.1.10 |
mscSigChanNisFramer OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.115.8.2 |
mscSigChanNisFramerRowStatusTableThis entry controls the addition and deletion of
mscSigChanNisFramer components. SEQUENCE OF MscSigChanNisFramerRowStatusEntry .1.3.6.1.4.1.562.36.2.1.115.8.2.1 |
mscSigChanNisFramerRowStatusEntryA single entry in the table represents a single
mscSigChanNisFramer component. MscSigChanNisFramerRowStatusEntry .1.3.6.1.4.1.562.36.2.1.115.8.2.1.1 |
mscSigChanNisFramerRowStatusThis variable is used as the basis for SNMP naming of
mscSigChanNisFramer components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.115.8.2.1.1.1 |
mscSigChanNisFramerComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.115.8.2.1.1.2 |
mscSigChanNisFramerStorageTypeThis variable represents the storage type value for the
mscSigChanNisFramer tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.115.8.2.1.1.4 |
mscSigChanNisFramerIndexThis variable represents the index for the mscSigChanNisFramer tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.115.8.2.1.1.10 |
mscSigChanNisFramerProvTableThis group contains the base provisioning data for the Framer
component. Application or hardware interface specific provisioning
data is contained in other provisionable Framer groups. SEQUENCE OF MscSigChanNisFramerProvEntry .1.3.6.1.4.1.562.36.2.1.115.8.2.10 |
mscSigChanNisFramerProvEntryAn entry in the mscSigChanNisFramerProvTable. MscSigChanNisFramerProvEntry .1.3.6.1.4.1.562.36.2.1.115.8.2.10.1 |
mscSigChanNisFramerInterfaceNameThis attribute contains a hardware component name.
The attribute associates the application with a specific link. This
defines the module processor on which Framer's parent component
(as well as Framer itself) will run.rw Link .1.3.6.1.4.1.562.36.2.1.115.8.2.10.1.1 |
mscSigChanNisFramerStateTableThis group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. SEQUENCE OF MscSigChanNisFramerStateEntry .1.3.6.1.4.1.562.36.2.1.115.8.2.12 |
mscSigChanNisFramerStateEntryAn entry in the mscSigChanNisFramerStateTable. MscSigChanNisFramerStateEntry .1.3.6.1.4.1.562.36.2.1.115.8.2.12.1 |
mscSigChanNisFramerAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.115.8.2.12.1.1 |
mscSigChanNisFramerOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.ro Enumeration .1.3.6.1.4.1.562.36.2.1.115.8.2.12.1.2 |
mscSigChanNisFramerUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.ro Enumeration .1.3.6.1.4.1.562.36.2.1.115.8.2.12.1.3 |
mscSigChanNisFramerStatsTableThis group contains the operational statistics data for a Framer
component. SEQUENCE OF MscSigChanNisFramerStatsEntry .1.3.6.1.4.1.562.36.2.1.115.8.2.13 |
mscSigChanNisFramerStatsEntryAn entry in the mscSigChanNisFramerStatsTable. MscSigChanNisFramerStatsEntry .1.3.6.1.4.1.562.36.2.1.115.8.2.13.1 |
mscSigChanNisFramerFrmToIfThis attribute counts the number of frames transmitted to the link
interface by Framer.
This count wraps to zero after reaching its maximum value.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.115.8.2.13.1.1 |
mscSigChanNisFramerFrmFromIfThis attribute counts the number of frames received from the link
interface by Framer.
This count wraps to zero after reaching its maximum value.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.115.8.2.13.1.2 |
mscSigChanNisFramerOctetFromIfThe number of bytes received from the link interface by Framer.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.115.8.2.13.1.3 |
mscSigChanNisFramerAbortsThis attribute counts the total number of aborts received.
This count wraps to zero after reaching its maximum value.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.115.8.2.13.1.4 |
mscSigChanNisFramerCrcErrorsThis attribute counts the total number of frames with CRC errors.
This count wraps to zero after reaching its maximum value.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.115.8.2.13.1.5 |
mscSigChanNisFramerLrcErrorsThis attribute counts the total number of frames with LRC errors.
This count wraps to zero after reaching its maximum value.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.115.8.2.13.1.6 |
mscSigChanNisFramerNonOctetErrorsThis attribute counts the total number of frames that were non octet
aligned.
This count wraps to zero after reaching its maximum value.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.115.8.2.13.1.7 |
mscSigChanNisFramerOverrunsThis attribute counts the total number of frames received from the
link for which overruns occurred.
This count wraps to zero after reaching its maximum value.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.115.8.2.13.1.8 |
mscSigChanNisFramerUnderrunsThis attribute counts the total number of frames transmitted to the
link for which underruns occurred.
This count wraps to zero after reaching its maximum value.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.115.8.2.13.1.9 |
mscSigChanNisFramerLargeFrmErrorsThis attribute counts the total number of frames received which
were too large (longer than 500 bytes).
This count wraps to zero after reaching its maximum value.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.115.8.2.13.1.10 |
mscSigChanNisL2TableThis group specifies the provisionable layer 2 attributes of the
Q.931 ITU-T protocol. SEQUENCE OF MscSigChanNisL2Entry .1.3.6.1.4.1.562.36.2.1.115.8.11 |
mscSigChanNisL2EntryAn entry in the mscSigChanNisL2Table. MscSigChanNisL2Entry .1.3.6.1.4.1.562.36.2.1.115.8.11.1 |
mscSigChanNisT23This attribute specifies the layer 2 enable request timer.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.115.8.11.1.1 |
mscSigChanNisT200This attribute specifies the maximum time between a layer 2 frame
and its acknowledgment.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.115.8.11.1.2 |
mscSigChanNisN200This attribute specifies the maximum number of re-transmissions of
a layer 2 frame.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.115.8.11.1.3 |
mscSigChanNisT203This attribute specifies the maximum time for which layer 2 frames
may be absent. Expiry triggers a check on whether the far end is
alive.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.115.8.11.1.4 |
mscSigChanNisCircuitSwitchedKThis attribute specifies the maximum number of sequentially
numbered I frames (that is, window size (k)) that may be
unacknowledged at any given time for a SAP supporting primary
rate (64kbit/sec) signalling.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.115.8.11.1.6 |
mscSigChanNisL3TableThis group represents the provisionable Layer 3 timer attributes of a
the Nis signalling protocol. SEQUENCE OF MscSigChanNisL3Entry .1.3.6.1.4.1.562.36.2.1.115.8.12 |
mscSigChanNisL3EntryAn entry in the mscSigChanNisL3Table. MscSigChanNisL3Entry .1.3.6.1.4.1.562.36.2.1.115.8.12.1 |
mscSigChanNisT309This attribute specifies the data link failure timer; used to ride out
temporary failures.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.115.8.12.1.3 |
mscSigChanNisT310This attribute specifies the call proceeding state timer.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.115.8.12.1.4 |
mscSigChanNisProvTableThis group defines the general options of the D-channel signalling
link. SEQUENCE OF MscSigChanNisProvEntry .1.3.6.1.4.1.562.36.2.1.115.8.13 |
mscSigChanNisProvEntryAn entry in the mscSigChanNisProvTable. MscSigChanNisProvEntry .1.3.6.1.4.1.562.36.2.1.115.8.13.1 |
mscSigChanNisSideThis attribute specifies whether the interface is the network or user
side of the connection. The parameter applies to both the layer 2
and layer 3 of the interface. If this attribute is set to network, then
the interface is master during channel negotiation. If this attribute is
set to user, then the interface is slave during channel negotiation.rw Enumeration .1.3.6.1.4.1.562.36.2.1.115.8.13.1.1 |
mscSigChanNisMaxNonCallConcurrentThis attribute specifies the maximum number of simultaneous active
non-call messages that are allowed.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.115.8.13.1.2 |
mscSigChanNisStateTableThis group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. SEQUENCE OF MscSigChanNisStateEntry .1.3.6.1.4.1.562.36.2.1.115.8.14 |
mscSigChanNisStateEntryAn entry in the mscSigChanNisStateTable. MscSigChanNisStateEntry .1.3.6.1.4.1.562.36.2.1.115.8.14.1 |
mscSigChanNisAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.115.8.14.1.1 |
mscSigChanNisOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.ro Enumeration .1.3.6.1.4.1.562.36.2.1.115.8.14.1.2 |
mscSigChanNisUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.ro Enumeration .1.3.6.1.4.1.562.36.2.1.115.8.14.1.3 |
mscSigChanNisStatsTableThis group provides the operational components for the NisSig
component. SEQUENCE OF MscSigChanNisStatsEntry .1.3.6.1.4.1.562.36.2.1.115.8.15 |
mscSigChanNisStatsEntryAn entry in the mscSigChanNisStatsTable. MscSigChanNisStatsEntry .1.3.6.1.4.1.562.36.2.1.115.8.15.1 |
mscSigChanNisTotalCallsToIfThis attribute counts the total number of calls that have been made
to the interface. The value wraps when it reaches its maximum.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.115.8.15.1.2 |
mscSigChanNisTotalCallsFromIfThis attribute counts the total number of calls from the interface.
The value wraps when it reaches its maximum.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.115.8.15.1.3 |
mscSigChanNisNonCallAssocSessionsToIfThis attribute counts the total number of non-call associated
sessions to the interface. The value wraps when it reaches its
maximum.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.115.8.15.1.4 |
mscSigChanNisNonCallAssocSessionsFromIfThis attribute counts the total number of non-call associated
sessions from the interface. The value wraps when it reaches its
maximum.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.115.8.15.1.5 |
mscSigChanNisOperTableThis group provides the operational attributes for the NisSig
protocol. SEQUENCE OF MscSigChanNisOperEntry .1.3.6.1.4.1.562.36.2.1.115.8.16 |
mscSigChanNisOperEntryAn entry in the mscSigChanNisOperTable. MscSigChanNisOperEntry .1.3.6.1.4.1.562.36.2.1.115.8.16.1 |
mscSigChanNisActiveChannelsThis attribute indicates the number of currently active channels.
This includes data and voice channels.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.115.8.16.1.1 |
mscSigChanNisActiveVoiceChannelsThis attribute indicates the number of channels that are currently
carrying voice.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.115.8.16.1.2 |
mscSigChanNisActiveDataChannelsThis attribute indicates the number of channels that are currently
carrying data. This does not include modem data.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.115.8.16.1.3 |
mscSigChanNisPeakActiveChannelsThis attribute indicates the maximum number of channels that have
been active on this signalling channel during the last polling period.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.115.8.16.1.4 |
mscSigChanNisPeakActiveVoiceChannelsThis attribute indicates the maximum number of voice channels that
have been active on this signalling channel during the last polling
period.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.115.8.16.1.5 |
mscSigChanNisPeakActiveDataChannelsThis attribute indicates the maximum number of data channels that
have been active on this signalling channel during the last polling
period.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.115.8.16.1.6 |
mscSigChanNisDChanStatusThis attribute indicates the state of the D-channel.
outOfService means that there is no layer 2 or layer 3 connectivity
to the PBX.
establishing means that the signalling channel is attempting to stage
the layer 2.
established means that the layer 2 is enabled. If the signalling
channel stays in the established state, then it is waiting for a restart
from the PBX.
enabling means that the resources for processing calls are being
initialized. If the signalling channel stays in the enabling state then
it is waiting for a restart acknowledgement from the PBX.
inService means that the resources for processing calls are
available.
restarting means that the resources for call processing are being
rei-initialized.ro Enumeration .1.3.6.1.4.1.562.36.2.1.115.8.16.1.7 |
mscSigChanNisToolsTableThis contains a series of operational attributes which turn on and off
several kinds of tracing. SEQUENCE OF MscSigChanNisToolsEntry .1.3.6.1.4.1.562.36.2.1.115.8.17 |
mscSigChanNisToolsEntryAn entry in the mscSigChanNisToolsTable. MscSigChanNisToolsEntry .1.3.6.1.4.1.562.36.2.1.115.8.17.1 |
mscSigChanNisTracingThis attribute defines which types of tracing are active for this
signalling channel. The tracing messages are sent to the debug
stream. To see the messages the agentQueue attribute in Col/debug
must be greater than 0 and a Telnet NMIS session must list the
debug stream in in its data streams (ex. set nmis telnet session/1
dataStreams debug). Different types of tracing can be enabled
simultaneously.
Note that tracing consumes additional CPU resources and will slow
down call processing on a heavily loaded card. If there is message
block exhaustion tracing will be suspended for a period and then
automatically reenabled. An alarm is generated on tracing
suspension and resumption. This mechanism protects the function
processor against excessive numbers of tracing messages.
Types of tracing include:
protocolErrors - get details of any protocol errors which are
occuring. Protocol errors are also reported in summary form as
alarms.
q931Summary - Summary of the Q.931 messages on the signalling
link, including certain call details (calling number, called number,
release codes).
q931Hex - Q.931 messages displayed in hex format. Useful to
determine protocol compliance in case of errors reported on local or
remote ends.
q931Symbolic - Q.931 messages parsed to give maximum detail.
Useful for understanding content of messages flowing on the link.
portHex - Messages in hex format being sent and received on the
link.
Description of bits:
protocolErrors(0)
q931Summary(1)
q931Hex(2)
q931Symbolic(3)
portHex(4)rw OCTET STRING .1.3.6.1.4.1.562.36.2.1.115.8.17.1.1 |
mscSigChanNisNisSpecificProvTableThis group provides NIS protocol specific provisioning. SEQUENCE OF MscSigChanNisNisSpecificProvEntry .1.3.6.1.4.1.562.36.2.1.115.8.18 |
mscSigChanNisNisSpecificProvEntryAn entry in the mscSigChanNisNisSpecificProvTable. MscSigChanNisNisSpecificProvEntry .1.3.6.1.4.1.562.36.2.1.115.8.18.1 |
mscSigChanNisChanMaintenanceHandlingThis attribute specifies how channel maintenance events should be
handled upon startup. Channel maintenance events include locking
and unlocking a channel or channel registration. The decision is
either to send individual channel RESTART messages, SERVICE
messages, or nothing. Note that channel registration only occurs
after the global interface restart at startup.
Setting this attribute to enable SERVICE messages ensures that
SERVICE messages occur at startup and whenever a channel goes
into or out of service. If this attribute is not set to enable SERVICE
messaging, a RESTART is always sent on unlocking a channel.
globalOnStartup provides the minimum required functionality at
startup, without any individual channel confirmation. Note that
when this is set, channel RESTART is still used for channel unlock.
globalOnStartup applies to SigChan startup only.
serviceMessage enables sending and receiving SERVICE messages.
If this attribute is set to serviceMessage, SERVICE messages are
used for channel maintenance on channel lock, channel unlock, and
startup.
restartMessage specifies that individual channel RESTARTs when
the SigChan starts up. If this attribute is set to restartMessage, a
RESTART message is used to send at startup and channel unlock.rw Enumeration .1.3.6.1.4.1.562.36.2.1.115.8.18.1.1 |
vnetNisSigMIB OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.112 |
IMPORTS Unknown .1.3.6.1.4.1.562.36.2.2.112 |
vnetNisSigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.112.1 |
vnetNisSigGroupCA OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.112.1.1 |
vnetNisSigGroupCA02 OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.112.1.1.3 |
vnetNisSigGroupCA02A OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.112.1.1.3.2 |
vnetNisSigCapabilities OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.112.3 |
vnetNisSigCapabilitiesCA OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.112.3.1 |
vnetNisSigCapabilitiesCA02 OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.112.3.1.3 |
vnetNisSigCapabilitiesCA02A OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.112.3.1.3.2 |