Nortel-MsCarrier-MscPassport-VirtualMediaMIB
AI MIB Summary
Standard SNMP MIB module defining data structures for Nortel-MsCarrier-MscPassport-VirtualMediaMIB.
45
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
45 total| Object Name |
|---|
mscVm OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.133 |
mscVmRowStatusTableThis entry controls the addition and deletion of
mscVm components. SEQUENCE OF MscVmRowStatusEntry .1.3.6.1.4.1.562.36.2.1.133.1 |
mscVmRowStatusEntryA single entry in the table represents a single
mscVm component. MscVmRowStatusEntry .1.3.6.1.4.1.562.36.2.1.133.1.1 |
mscVmRowStatusThis variable is used as the basis for SNMP naming of
mscVm components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.133.1.1.1 |
mscVmComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.133.1.1.2 |
mscVmStorageTypeThis variable represents the storage type value for the
mscVm tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.133.1.1.4 |
mscVmIndexThis variable represents the index for the mscVm tables. Integer32 .1.3.6.1.4.1.562.36.2.1.133.1.1.10 |
mscVmIf OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.133.2 |
mscVmIfRowStatusTableThis entry controls the addition and deletion of
mscVmIf components. SEQUENCE OF MscVmIfRowStatusEntry .1.3.6.1.4.1.562.36.2.1.133.2.1 |
mscVmIfRowStatusEntryA single entry in the table represents a single
mscVmIf component. MscVmIfRowStatusEntry .1.3.6.1.4.1.562.36.2.1.133.2.1.1 |
mscVmIfRowStatusThis variable is used as the basis for SNMP naming of
mscVmIf components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.133.2.1.1.1 |
mscVmIfComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.133.2.1.1.2 |
mscVmIfStorageTypeThis variable represents the storage type value for the
mscVmIf tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.133.2.1.1.4 |
mscVmIfIndexThis variable represents the index for the mscVmIf tables. Integer32 .1.3.6.1.4.1.562.36.2.1.133.2.1.1.10 |
mscVmIfMpTableThis group contains the base provisioning data for the media base
component. SEQUENCE OF MscVmIfMpEntry .1.3.6.1.4.1.562.36.2.1.133.2.10 |
mscVmIfMpEntryAn entry in the mscVmIfMpTable. MscVmIfMpEntry .1.3.6.1.4.1.562.36.2.1.133.2.10.1 |
mscVmIfLinkToProtocolPortThis attribute specifies the ProtocolPort to which this interface is
linked to. The protocol port is the logical interface to the network.
The protocol port component describes the logical characteristics of
this interface.rw Link .1.3.6.1.4.1.562.36.2.1.133.2.10.1.1 |
mscVmIfCidDataTableThis group contains the attribute for a component's Customer
Identifier (CID). Refer to the attribute description for a detailed
explanation of CIDs. SEQUENCE OF MscVmIfCidDataEntry .1.3.6.1.4.1.562.36.2.1.133.2.11 |
mscVmIfCidDataEntryAn entry in the mscVmIfCidDataTable. MscVmIfCidDataEntry .1.3.6.1.4.1.562.36.2.1.133.2.11.1 |
mscVmIfCustomerIdentifierThis attribute holds the Customer Identifier (CID).
Every component has a CID. If a component has a cid attribute, the
component's CID is the provisioned value of that attribute;
otherwise the component inherits the CID of its parent. The top-
level component has a CID of 0.
Every operator session also has a CID, which is the CID
provisioned for the operator's user ID. An operator will see only the
stream data for components having a matching CID. Also, the
operator will be allowed to issue commands for only those
components which have a matching CID.
An operator CID of 0 is used to identify the Network Manager
(referred to as 'NetMan' in DPN). This CID matches the CID of
any component. Values 1 to 8191 inclusive (equivalent to 'basic
CIDs' in DPN) may be assigned to specific customers.rw Unsigned32 (0 | 1..8191) .1.3.6.1.4.1.562.36.2.1.133.2.11.1.1 |
mscVmIfIfEntryTableThis group contains the provisionable attributes for the ifEntry. SEQUENCE OF MscVmIfIfEntryEntry .1.3.6.1.4.1.562.36.2.1.133.2.12 |
mscVmIfIfEntryEntryAn entry in the mscVmIfIfEntryTable. MscVmIfIfEntryEntry .1.3.6.1.4.1.562.36.2.1.133.2.12.1 |
mscVmIfIfAdminStatusThe desired state of the interface. The up state indicates the
interface is operational. The down state indicates the interface is not
operational. The testing state indicates that no operational packets
can be passed.rw Enumeration .1.3.6.1.4.1.562.36.2.1.133.2.12.1.1 |
mscVmIfIfIndexThis is the index for the IfEntry. Its value is automatically initialized
during the provisioning process.ro InterfaceIndex .1.3.6.1.4.1.562.36.2.1.133.2.12.1.2 |
mscVmIfOperStatusTableThis group includes the Operational Status attribute. This attribute
defines the current operational state of this component. SEQUENCE OF MscVmIfOperStatusEntry .1.3.6.1.4.1.562.36.2.1.133.2.13 |
mscVmIfOperStatusEntryAn entry in the mscVmIfOperStatusTable. MscVmIfOperStatusEntry .1.3.6.1.4.1.562.36.2.1.133.2.13.1 |
mscVmIfSnmpOperStatusThe current state of the interface. The up state indicates the
interface is operational and capable of forwarding packets. The
down state indicates the interface is not operational, thus unable to
forward packets. testing state indicates that no operational packets
can be passed.ro Enumeration .1.3.6.1.4.1.562.36.2.1.133.2.13.1.1 |
mscVmIfStateTableThis group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. SEQUENCE OF MscVmIfStateEntry .1.3.6.1.4.1.562.36.2.1.133.2.14 |
mscVmIfStateEntryAn entry in the mscVmIfStateTable. MscVmIfStateEntry .1.3.6.1.4.1.562.36.2.1.133.2.14.1 |
mscVmIfAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.133.2.14.1.1 |
mscVmIfOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.ro Enumeration .1.3.6.1.4.1.562.36.2.1.133.2.14.1.2 |
mscVmIfUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.ro Enumeration .1.3.6.1.4.1.562.36.2.1.133.2.14.1.3 |
mscVmIfProvTableThis group contains the provisionable attributes for the If
component. SEQUENCE OF MscVmIfProvEntry .1.3.6.1.4.1.562.36.2.1.133.2.15 |
mscVmIfProvEntryAn entry in the mscVmIfProvTable. MscVmIfProvEntry .1.3.6.1.4.1.562.36.2.1.133.2.15.1 |
mscVmIfModeThis attribute specifies the mode of operation of the Vm If. Two
modes are supported: alwaysUpInterface and interVrConnection.
alwaysUpInterface: This mode limits the Vm If to provide the
functionality of an 'always up interface' only. Inter-VR
communcation is not possible when this mode is selected. Memory
consumption by the Vm If is significantly less on FP when this
mode is selected. Hence this mode should be used when the sole
purpose of the Vm If is to provide an always up interface for
application like BGP4.
interVrConnection: This mode provides the full capability of
VirtualMedia, i.e. 'always up interface' and inter-VR
communication.rw Enumeration .1.3.6.1.4.1.562.36.2.1.133.2.15.1.1 |
virtualMediaMIB OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.135 |
IMPORTS Unknown .1.3.6.1.4.1.562.36.2.2.135 |
virtualMediaGroup OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.135.1 |
virtualMediaGroupCA OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.135.1.1 |
virtualMediaGroupCA02 OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.135.1.1.3 |
virtualMediaGroupCA02A OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.135.1.1.3.2 |
virtualMediaCapabilities OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.135.3 |
virtualMediaCapabilitiesCA OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.135.3.1 |
virtualMediaCapabilitiesCA02 OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.135.3.1.3 |
virtualMediaCapabilitiesCA02A OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.135.3.1.3.2 |