Nortel-MsCarrier-MscPassport-TdmaIwfMIB
AI MIB Summary
Standard SNMP MIB module defining data structures for Nortel-MsCarrier-MscPassport-TdmaIwfMIB.
341
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
341 total| Object Name |
|---|
mscTdmaCs OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.135 |
mscTdmaCsRowStatusTableThis entry controls the addition and deletion of
mscTdmaCs components. SEQUENCE OF MscTdmaCsRowStatusEntry .1.3.6.1.4.1.562.36.2.1.135.1 |
mscTdmaCsRowStatusEntryA single entry in the table represents a single
mscTdmaCs component. MscTdmaCsRowStatusEntry .1.3.6.1.4.1.562.36.2.1.135.1.1 |
mscTdmaCsRowStatusThis variable is used as the basis for SNMP naming of
mscTdmaCs components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.135.1.1.1 |
mscTdmaCsComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.135.1.1.2 |
mscTdmaCsStorageTypeThis variable represents the storage type value for the
mscTdmaCs tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.135.1.1.4 |
mscTdmaCsCsIndexThis variable represents the index for the mscTdmaCs tables. Integer32 .1.3.6.1.4.1.562.36.2.1.135.1.1.10 |
mscTdmaCsModem OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.135.2 |
mscTdmaCsModemRowStatusTableThis entry controls the addition and deletion of
mscTdmaCsModem components. SEQUENCE OF MscTdmaCsModemRowStatusEntry .1.3.6.1.4.1.562.36.2.1.135.2.1 |
mscTdmaCsModemRowStatusEntryA single entry in the table represents a single
mscTdmaCsModem component. MscTdmaCsModemRowStatusEntry .1.3.6.1.4.1.562.36.2.1.135.2.1.1 |
mscTdmaCsModemRowStatusThis variable is used as the basis for SNMP naming of
mscTdmaCsModem components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.135.2.1.1.1 |
mscTdmaCsModemComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.135.2.1.1.2 |
mscTdmaCsModemStorageTypeThis variable represents the storage type value for the
mscTdmaCsModem tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.135.2.1.1.4 |
mscTdmaCsModemIndexThis variable represents the index for the mscTdmaCsModem tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.135.2.1.1.10 |
mscTdmaCsFax OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.135.3 |
mscTdmaCsFaxRowStatusTableThis entry controls the addition and deletion of
mscTdmaCsFax components. SEQUENCE OF MscTdmaCsFaxRowStatusEntry .1.3.6.1.4.1.562.36.2.1.135.3.1 |
mscTdmaCsFaxRowStatusEntryA single entry in the table represents a single
mscTdmaCsFax component. MscTdmaCsFaxRowStatusEntry .1.3.6.1.4.1.562.36.2.1.135.3.1.1 |
mscTdmaCsFaxRowStatusThis variable is used as the basis for SNMP naming of
mscTdmaCsFax components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.135.3.1.1.1 |
mscTdmaCsFaxComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.135.3.1.1.2 |
mscTdmaCsFaxStorageTypeThis variable represents the storage type value for the
mscTdmaCsFax tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.135.3.1.1.4 |
mscTdmaCsFaxIndexThis variable represents the index for the mscTdmaCsFax tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.135.3.1.1.10 |
mscTdmaCsDce OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.135.4 |
mscTdmaCsDceRowStatusTableThis entry controls the addition and deletion of
mscTdmaCsDce components. SEQUENCE OF MscTdmaCsDceRowStatusEntry .1.3.6.1.4.1.562.36.2.1.135.4.1 |
mscTdmaCsDceRowStatusEntryA single entry in the table represents a single
mscTdmaCsDce component. MscTdmaCsDceRowStatusEntry .1.3.6.1.4.1.562.36.2.1.135.4.1.1 |
mscTdmaCsDceRowStatusThis variable is used as the basis for SNMP naming of
mscTdmaCsDce components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.135.4.1.1.1 |
mscTdmaCsDceComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.135.4.1.1.2 |
mscTdmaCsDceStorageTypeThis variable represents the storage type value for the
mscTdmaCsDce tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.135.4.1.1.4 |
mscTdmaCsDceIndexThis variable represents the index for the mscTdmaCsDce tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.135.4.1.1.10 |
mscTdmaCsDsc OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.135.5 |
mscTdmaCsDscRowStatusTableThis entry controls the addition and deletion of
mscTdmaCsDsc components. SEQUENCE OF MscTdmaCsDscRowStatusEntry .1.3.6.1.4.1.562.36.2.1.135.5.1 |
mscTdmaCsDscRowStatusEntryA single entry in the table represents a single
mscTdmaCsDsc component. MscTdmaCsDscRowStatusEntry .1.3.6.1.4.1.562.36.2.1.135.5.1.1 |
mscTdmaCsDscRowStatusThis variable is used as the basis for SNMP naming of
mscTdmaCsDsc components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.135.5.1.1.1 |
mscTdmaCsDscComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.135.5.1.1.2 |
mscTdmaCsDscStorageTypeThis variable represents the storage type value for the
mscTdmaCsDsc tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.135.5.1.1.4 |
mscTdmaCsDscIndexThis variable represents the index for the mscTdmaCsDsc tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.135.5.1.1.10 |
mscTdmaCsDscProvTableThis group contains the provisionable attributes for Data Service
Control Asynchronous Data Service portion of the wireless protocol
stack used for the calls set up by this particular TdmaIwfCallServer. SEQUENCE OF MscTdmaCsDscProvEntry .1.3.6.1.4.1.562.36.2.1.135.5.10 |
mscTdmaCsDscProvEntryAn entry in the mscTdmaCsDscProvTable. MscTdmaCsDscProvEntry .1.3.6.1.4.1.562.36.2.1.135.5.10.1 |
mscTdmaCsDscLl0BufferSizeThis attribute specifies the maximum size of the DSC logical link 0
control buffer. Changes impact the amount of memory used (more
memory is used when increasing the attribute). The gain in
performance obtained from the selection of a larger buffer size may
be offset by less memory being available. The customer might wish
to increase the buffer size when a degradation in throughput of the
system is seen.rwobsolete Unsigned32 .1.3.6.1.4.1.562.36.2.1.135.5.10.1.1 |
mscTdmaCsDscLl1BufferSizeThis attribute specifies the maximum size of the DSC logical link 1
data buffer. Changes impact the amount of memory used (more
memory is used when increasing the attribute). The gain in
performance obtained from the selection of a larger buffer size may
be offset by less memory being available. The customer might wish
to increase the buffer size when a degradation in throughput of the
system is seen.rwobsolete Unsigned32 .1.3.6.1.4.1.562.36.2.1.135.5.10.1.2 |
mscTdmaCsDscK0Ll0WindowSizeThis attribute specifies the maximum size of the DSC logical link 0
window.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.135.5.10.1.3 |
mscTdmaCsDscK1Ll1WindowSizeThis attribute specifies the maximum size of the DSC logical link 1
window.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.135.5.10.1.4 |
mscTdmaCsDscP0CompressionDirectionThis attribute specifies the compression configuration for DSC. This
attribute has one of the following values:
noCompression: No compression.
compInitrResp: Compression initiator to responder.
compRespInitr: Compression responder to initiator.
compBoth: Compression both directions.rwobsolete Enumeration .1.3.6.1.4.1.562.36.2.1.135.5.10.1.5 |
mscTdmaCsDscP1CompressionMaximumCodewordsThis attribute specifies the maximum number of codewords to be
used for compression. A codeword is a binary number that
represents a string of characters. Changes to this attribute impact the
amount of memory used (more memory is used when increasing the
attribute). The gain in performance obtained from the selection of a
larger dictionary may be offset by the larger codeword size needed,
and for certain types of data, better performance may be obtained
by using a smaller dictionary.
Changes to this attribute do not affect existing calls.rwobsolete Unsigned32 .1.3.6.1.4.1.562.36.2.1.135.5.10.1.6 |
mscTdmaCsDscP2CompressionMaximumCharactersThis attribute specifies the maximum number of characters that can
be represented by a single codeword to be used for compression
from logical link 0.rwobsolete Unsigned32 .1.3.6.1.4.1.562.36.2.1.135.5.10.1.7 |
mscTdmaCsRlp1 OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.135.6 |
mscTdmaCsRlp1RowStatusTableThis entry controls the addition and deletion of
mscTdmaCsRlp1 components. SEQUENCE OF MscTdmaCsRlp1RowStatusEntry .1.3.6.1.4.1.562.36.2.1.135.6.1 |
mscTdmaCsRlp1RowStatusEntryA single entry in the table represents a single
mscTdmaCsRlp1 component. MscTdmaCsRlp1RowStatusEntry .1.3.6.1.4.1.562.36.2.1.135.6.1.1 |
mscTdmaCsRlp1RowStatusThis variable is used as the basis for SNMP naming of
mscTdmaCsRlp1 components.
These components can be added.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.135.6.1.1.1 |
mscTdmaCsRlp1ComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.135.6.1.1.2 |
mscTdmaCsRlp1StorageTypeThis variable represents the storage type value for the
mscTdmaCsRlp1 tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.135.6.1.1.4 |
mscTdmaCsRlp1IndexThis variable represents the index for the mscTdmaCsRlp1 tables. Enumeration .1.3.6.1.4.1.562.36.2.1.135.6.1.1.10 |
mscTdmaCsRlp1ProvTableThis group contains provisionable attributes for the Radio Link
Protocol 1 (RLP1) parameters used for the calls set up by this
particular TdmaIwfCallServer. Changes to these attributes do not
affect existing calls. SEQUENCE OF MscTdmaCsRlp1ProvEntry .1.3.6.1.4.1.562.36.2.1.135.6.10 |
mscTdmaCsRlp1ProvEntryAn entry in the mscTdmaCsRlp1ProvTable. MscTdmaCsRlp1ProvEntry .1.3.6.1.4.1.562.36.2.1.135.6.10.1 |
mscTdmaCsRlp1T1ResponseTimerThis attribute specifies the time the receiving Radio Link Protocol
(RLP1) entity shall wait for a response from the peer TIA-136-310
(formerly IS-130) application.
During the Exchange Information (XID) negotiation, both RLP1
entities (mobile station and IWF) can agree to use a specific value
for this timer (T1). The IWF attempts to negotiate to the value
specified by this attribute.
Changes to this attribute do not affect existing calls.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.135.6.10.1.1 |
mscTdmaCsRlp1T2LinkActivityTimerThis attribute specifies the maximum time the receiving Radio Link
Protocol (RLP1) entity shall wait for link activity.
During the Exchange Information (XID) negotiation, both RLP1
entities (mobile station and IWF) can agree to use a specific value
for this timer (T2). The IWF attempts to negotiate to the value
specified by this attribute.
Changes to this attribute do not affect existing calls.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.135.6.10.1.2 |
mscTdmaCsRlp1T3PeerAckTimerThis attribute specifies the maximum time the receiving Radio Link
Protocol (RLP1) entity shall wait for the peer to ACK or NAK data.
During the Exchange Information (XID) negotiation, both RLP1
entities (mobile station and IWF) can agree to use a specific value
for this timer (T3). The IWF attempts to negotiate to the value
specified by this attribute.
Changes to this attribute do not affect existing calls.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.135.6.10.1.3 |
mscTdmaCsV42 OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.135.7 |
mscTdmaCsV42RowStatusTableThis entry controls the addition and deletion of
mscTdmaCsV42 components. SEQUENCE OF MscTdmaCsV42RowStatusEntry .1.3.6.1.4.1.562.36.2.1.135.7.1 |
mscTdmaCsV42RowStatusEntryA single entry in the table represents a single
mscTdmaCsV42 component. MscTdmaCsV42RowStatusEntry .1.3.6.1.4.1.562.36.2.1.135.7.1.1 |
mscTdmaCsV42RowStatusThis variable is used as the basis for SNMP naming of
mscTdmaCsV42 components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.135.7.1.1.1 |
mscTdmaCsV42ComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.135.7.1.1.2 |
mscTdmaCsV42StorageTypeThis variable represents the storage type value for the
mscTdmaCsV42 tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.135.7.1.1.4 |
mscTdmaCsV42IndexThis variable represents the index for the mscTdmaCsV42 tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.135.7.1.1.10 |
mscTdmaCsV42ProvTableThis group contains the provisionable attributes for the V.42
protocol used for the calls set up by this particular IwfCallServer.
Changes to these attributes do not affect existing calls. SEQUENCE OF MscTdmaCsV42ProvEntry .1.3.6.1.4.1.562.36.2.1.135.7.10 |
mscTdmaCsV42ProvEntryAn entry in the mscTdmaCsV42ProvTable. MscTdmaCsV42ProvEntry .1.3.6.1.4.1.562.36.2.1.135.7.10.1 |
mscTdmaCsV42T400DetectTimerThis attribute specifies the maximum amount of time that the IWF
waits for an Originator Detection Pattern (ODP) or Answerer
Detection Pattern (ADP). ODP/ADP is a series of special bit
patterns used during the call setup procedures.
If the IWF is the originator of the call, it starts sending ODP
patterns and waits for an ADP for the duration of T400 from the
answerer at call setup time.
If the IWF is the answerer of the call, it waits for an ODP for T400
seconds from the originator and if it receives during that time it
sends an ADP pattern to the originator at the call setup time. Since
both sides operate with different values of T400 timer, a higher
value increases the chance of a successful call setup.
Changes to this attribute do not affect existing calls.rw FixedPoint2 .1.3.6.1.4.1.562.36.2.1.135.7.10.1.1 |
mscTdmaCsV42T401AckTimerThis attribute specifies the maximum amount of time that the IWF
waits for an acknowledgment before retransmitting a frame. Since
information about the T401 timer is not carried in the Exchange
Identification (XID) negotiations at call setup time, both sides
operate with different timer values. The value for T401 depends on
many factors, such as propagation delay or frame processing time.
A frame is retransmitted up to N400 times if the timer T401 expires
before an acknowledgment for a frame is actually received. The
performance of the data link layer can be impacted by the value of
this timer as retransmissions of frames occur on expiry of timer
T401.
Changes to this attribute do not affect existing calls.rw FixedPoint2 .1.3.6.1.4.1.562.36.2.1.135.7.10.1.2 |
mscTdmaCsV42T402AckDelayTimerThis attribute specifies the maximum amount of time that the IWF
may wait following the receipt of any frame requiring a reply before
it initiates transmission of an appropriate reply in order to ensure
that the reply frame is received by the remote error-correcting entity
prior to expiration of the T401 timer of the remote error-correcting
entity. Since information about the T402 timer is not carried in the
Exchange Identification (XID) negotiations at call setup, both sides
operate with different timer values. If this timer expires, then the
reply that would have been returned prior to its expiration is not
sent. The performance of the data link layer can be impacted by the
value of this timer as retransmissions of frames occur on expiry of
timer T401. For better performance, a value of t402AckDelayTimer
(T402) equal to half the value of t401AckTimer (T401) is
recommended.
Changes to this attribute do not affect existing calls.rw FixedPoint2 .1.3.6.1.4.1.562.36.2.1.135.7.10.1.3 |
mscTdmaCsV42T403IdleProbeTimerThis attribute specifies the maximum amount of time that the IWF
allows to elapse without frames being exchanged. The link is
permitted to remain idle with no frames being exchanged on the
data link. Upon expiry of this timer, the IWF polls its peer for
status. Since information about the T403 timer is not carried in the
Exchange Identification (XID) negotiations at call setup time, both
sides operate with different timer values.
Changes to this attribute do not affect existing calls.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.135.7.10.1.4 |
mscTdmaCsV42TxN401FrameSizeThis attribute specifies the maximum number of octets that can be
carried in the information field of an Information (I) frame,
Exchange Identification (XID) frame, and a Unnumbered
Information (UI) frame from the IWF to the remote entity. The
default value is 128 octets, and no XID negotiations required for
txN401FrameSize. If the value for txN401FrameSize value is set to
other than 128 octets, then XID frames are exchanged to negotiate a
value. The value provided for txN401FrameSize sets up the bounds
during XID negotiations. The IWF performs XID negotiations with
this value as a minimum or maximum value. If a value greater than
128 is specified, then the IWF negotiates or attempts to negotiate a
value between the 128 (as a minimum) and the given value (as a
maximum). If a value less than 128 is specified, then the IWF
attempts to negotiate a value between the given value (as a
minimum) and 128 (as a maximum). Any value can be specified as
long as it is within the provisionable limits. However, a value equal
to or close to 128 is recommended.
Changes to this attribute do not affect existing calls.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.135.7.10.1.5 |
mscTdmaCsV42RxN401FrameSizeThis attribute specifies the maximum number of octets that can be
carried in the information field of an Information (I) frame,
Exchange Identification (XID) frame, and a Unnumbered
Information (UI) frame from the remote entity to the IWF. The
default value is 128 octets, and no XID negotiations are required for
rxN401FrameSize. If the value set for rxN401FrameSize is other
than 128, XID frames are exchanged to negotiate a value. The value
provided for rxN401FrameSize sets up the bounds during XID
negotiations. The IWF performs XID negotiations with this value as
a minimum or maximum value. If a value greater than 128 is
specified, then the IWF attempts to negotiate for a value between
128 (as a minimum) and the given value (as a maximum). If a value
less than 128 value is specified, then the IWF attempts to negotiate
for a value between the given value (as a minimum) and 128 (as a
maximum). Any value can be specified as long as it is within the
provisionable limits. However, a value equal to or close to the
default is recommended.
Changes to this attribute do not affect existing calls.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.135.7.10.1.6 |
mscTdmaCsV42TxKWindowSizeThis attribute specifies the maximum number of outstanding
unacknowledged sequenced Information (I) frames from the IWF to
the remote entity. The default value is 15 frames, and if this value is
used then no Exchange Identification (XID) negotiations are
required for txKWindowSize. If the value set for txKWindowSize is
other than 15, then XID frames are exchanged to negotiate a value.
The value provided for txKWindowSize sets up the bounds during
XID negotiations. The IWF performs XID negotiations with this
value as a minimum or maximum value. If a value greater than 15 is
specified, then the IWF attempts to negotiate a value between 15 (as
a minimum) and the given value (as a maximum). If a value less
than 15 is specified, then the IWF attempts to negotiate for a value
between the given value (as a minimum) and 15 (as a maximum).
Any value can be specified as long at it is within the provisionable
limits. However, a value equal to or close to the default is
recommended.
Changes to this attribute do not affect existing calls.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.135.7.10.1.7 |
mscTdmaCsV42RxKWindowSizeThis attribute specifies the maximum number of outstanding
unacknowledged sequenced Information (I) frames from the remote
entity to the IWF. The default value is 15 frames, and if this value is
used then no Exchange Identification (XID) negotiations are
required for rxKWindowSize. If the value set for rxKWindowSize is
other than 15, then XID frames are exchanged to negotiate a value.
The value provided for rxKWindowSize sets up the bounds during
XID negotiations. The IWF performs XID negotiations with this
value as a minimum or maximum value. If a value greater than 15 is
specified, then the IWF attempts to negotiate a value between 15 (as
a minimum) and the given value (as a maximum). If a value less
than 15 is specified, then the IWF attempts to negotiate for a value
between the given value (as a minimum) and 15 (as a maximum).
Any value can be specified as long as it is within the provisionable
limits. However, a value equal to or close to the default is
recommended.
Changes to this attribute do not affect existing calls.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.135.7.10.1.8 |
mscTdmaCsV42N400RetransLimitThis attribute specifies the maximum number of times the IWF
retransmits a frame upon expiry of t401AckTimer before
appropriate recovery action is taken. Information about N400
(Retransmission Limit) is not carried in the Exchange Identification
(XID) negotiation at call setup time so both sides operate with
different N400 values.
Changes to this attribute do not affect existing calls.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.135.7.10.1.9 |
mscTdmaCsV42FcsLengthThis attribute specifies whether a 16 bit or a 32 bit Frame Check
Sequence (FCS) will be used for the link between the IWF and the
far end DCE. This attribute has one of the following values:
fcs16: Use only a 16 bit FCS.
fcs32Or16: 32 bit FCS is preferred; Use a 16 bit FCS if needed.
fcs32Only: Use only a 32 it FCS; If unavailable, drop the
connection.rw Enumeration .1.3.6.1.4.1.562.36.2.1.135.7.10.1.10 |
mscTdmaCsV42Bis OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.135.8 |
mscTdmaCsV42BisRowStatusTableThis entry controls the addition and deletion of
mscTdmaCsV42Bis components. SEQUENCE OF MscTdmaCsV42BisRowStatusEntry .1.3.6.1.4.1.562.36.2.1.135.8.1 |
mscTdmaCsV42BisRowStatusEntryA single entry in the table represents a single
mscTdmaCsV42Bis component. MscTdmaCsV42BisRowStatusEntry .1.3.6.1.4.1.562.36.2.1.135.8.1.1 |
mscTdmaCsV42BisRowStatusThis variable is used as the basis for SNMP naming of
mscTdmaCsV42Bis components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.135.8.1.1.1 |
mscTdmaCsV42BisComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.135.8.1.1.2 |
mscTdmaCsV42BisStorageTypeThis variable represents the storage type value for the
mscTdmaCsV42Bis tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.135.8.1.1.4 |
mscTdmaCsV42BisIndexThis variable represents the index for the mscTdmaCsV42Bis tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.135.8.1.1.10 |
mscTdmaCsV42BisProvTableThis group contains the provisionable attributes for the V.42bis data
compression protocol parameters used for the calls set up by this
particular CallServer. Changes to these attributes do not affect
existing calls. SEQUENCE OF MscTdmaCsV42BisProvEntry .1.3.6.1.4.1.562.36.2.1.135.8.10 |
mscTdmaCsV42BisProvEntryAn entry in the mscTdmaCsV42BisProvTable. MscTdmaCsV42BisProvEntry .1.3.6.1.4.1.562.36.2.1.135.8.10.1 |
mscTdmaCsV42BisP0CompressionDirectionThis attribute specifies the V.42bis data compression direction to be
supported. The value for compression direction is negotiated at link
setup by the data link protocol by way of the Exchange
Identification (XID) negotiation of parameter P0 (compression
direction).
During XID negotiation of parameter P0, both sides (IWF and
mobile or IWF and PSTN) agree on the compression direction.
This attribute has one of the following values:
noCompression: No compression is present.
compInitrResp: The data sent by the IWF to the other entity is
compressed.
compRespInitr: The data received by the IWF from the other entity
is compressed.
compBoth: The data sent and received by the IWF is compressed.
Changes to this attribute do not affect existing calls.rw Enumeration .1.3.6.1.4.1.562.36.2.1.135.8.10.1.1 |
mscTdmaCsV42BisP1MaximumCodewordsThis attribute specifies the maximum number of V.42bis codewords
the IWF supports. A codeword is a binary number that represents a
string of characters in compressed form. V.42bis keeps a dictionary
of codewords for each compression direction. Changes to this
attribute impact the compression ratio for the encoder (component
TdmaBc V42Bis attribute compRatioEncoder). Changes also impact
the amount of memory used (more memory is used when increasing
the attribute). The gain in performance obtained from the selection
of a larger dictionary may be offset by the larger codeword size
needed, and for certain types of data, better performance may be
obtained by using a smaller dictionary.
Changes to this attribute do not affect existing calls.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.135.8.10.1.2 |
mscTdmaCsV42BisP2MaximumStringSizeThis attribute specifies the maximum number of characters allowed
in a string represented by a codeword that the IWF supports. Each
codeword in a V.42bis dictionary represents a string of characters.
Changes to this attribute impact the compression ratio for the
encoder.
Changes to this attribute do not affect existing calls.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.135.8.10.1.3 |
mscTdmaCsV42BisActionOnErrorThis attribute specifies whether or not V.42bis takes down the call
or resets the link when any of the following errors occur:
1.Receipt of STEPUP (step up codeword size) codeword when it
would cause C2 (current code word size) to exceed N1 (maximum
code word size).
2. Receipt of a codeword, at any time, equal to C1 (next empty
dictionary entry).
3. Receipt of a codeword representing an empty dictionary entry.
4. Receipt of a reserved command code.
5. Receipt of any other error.
If the value is resetLink, the error corrected connection and V.42bis
dictionaries are reset. Some data is lost but the call continues. If the
value is takeDownCall, the call is taken down.
Changes to this attribute do not affect existing calls.rw Enumeration .1.3.6.1.4.1.562.36.2.1.135.8.10.1.4 |
mscTdmaCsLp OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.135.9 |
mscTdmaCsLpRowStatusTableThis entry controls the addition and deletion of
mscTdmaCsLp components. SEQUENCE OF MscTdmaCsLpRowStatusEntry .1.3.6.1.4.1.562.36.2.1.135.9.1 |
mscTdmaCsLpRowStatusEntryA single entry in the table represents a single
mscTdmaCsLp component. MscTdmaCsLpRowStatusEntry .1.3.6.1.4.1.562.36.2.1.135.9.1.1 |
mscTdmaCsLpRowStatusThis variable is used as the basis for SNMP naming of
mscTdmaCsLp components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.135.9.1.1.1 |
mscTdmaCsLpComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.135.9.1.1.2 |
mscTdmaCsLpStorageTypeThis variable represents the storage type value for the
mscTdmaCsLp tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.135.9.1.1.4 |
mscTdmaCsLpIndexThis variable represents the index for the mscTdmaCsLp tables. Integer32 .1.3.6.1.4.1.562.36.2.1.135.9.1.1.10 |
mscTdmaCsLpOperTableThis group contains operational attributes pertaining to information
about TdmaIwfBearerChannels and TdmaIwfLogicalProcessor
associated with a TdmaIwfCallServer from a high-level view. SEQUENCE OF MscTdmaCsLpOperEntry .1.3.6.1.4.1.562.36.2.1.135.9.10 |
mscTdmaCsLpOperEntryAn entry in the mscTdmaCsLpOperTable. MscTdmaCsLpOperEntry .1.3.6.1.4.1.562.36.2.1.135.9.10.1 |
mscTdmaCsLpConfiguredBearerChannelsThis attribute indicates the number of TdmaIwfBearerChannel
components provisioned for the TdmaIwfLogicalProcessor
represented by this component.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.135.9.10.1.1 |
mscTdmaCsLpActiveCallsThis attribute indicates the number of calls currently active on this
LogicalProcessor.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.135.9.10.1.2 |
mscTdmaCsLpModemsSupportedThis attribute indicates if modems are supported with this
TdmaIwfLogicalProcessor. This attribute has one of the following
values:
yes: Modems are supported with this TdmaIwfLogicalProcessor.
no: Modems are not supported with this TdmaIwfLogicalProcessor.ro Enumeration .1.3.6.1.4.1.562.36.2.1.135.9.10.1.3 |
mscTdmaCsServProvTableThis group contains all the necessary timers for call setup and call
clearing scenarios on the IWF. SEQUENCE OF MscTdmaCsServProvEntry .1.3.6.1.4.1.562.36.2.1.135.100 |
mscTdmaCsServProvEntryAn entry in the mscTdmaCsServProvTable. MscTdmaCsServProvEntry .1.3.6.1.4.1.562.36.2.1.135.100.1 |
mscTdmaCsTIwf1This is an internal timer to the call server of the IWF and is used
during call setup for ensuring the MIT protocol stack and the NIT
modem for a new call have been allocated and initialized.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.135.100.1.1 |
mscTdmaCsTIwf2This is an internal timer to the call server of the IWF and is used
during call clearing for ensuring the MIT protocol stack and NIT
modem for a call have been deallocated correctly.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.135.100.1.2 |
mscTdmaCsT303This timer is a call setup timer and is used for ensuring a
CallProceeding message is received for a Setup message that has
been sent by the IWF to the MTX.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.135.100.1.3 |
mscTdmaCsT305This timer is a call clearing timer and is used for ensuring a Release
message is received for a Disconnect message the IWF has sent to
the MTX.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.135.100.1.4 |
mscTdmaCsT308This timer is a call clearing timer and is used for ensuring a
ReleaseComplete message is received for the Release message the
IWF has sent to the MTX.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.135.100.1.5 |
mscTdmaCsT313This is a call setup timer and is used for ensuring a ConnectAck
message is received in response for the Connect message the IWF
has sent to the MTX.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.135.100.1.6 |
mscTdmaCsT999This timer is used during a mobile termination call setup and is used
for ensuring the Setup message is received from the MTX.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.135.100.1.7 |
mscTdmaCsSupportedTechnologyThis attribute specifies the wireless technology that is supported for
data calls on this IWF.rw Enumeration .1.3.6.1.4.1.562.36.2.1.135.100.1.8 |
mscTdmaCsSupportedServiceThis attribute specifies the type(s) of data calls this IWF supports.rw Enumeration .1.3.6.1.4.1.562.36.2.1.135.100.1.9 |
mscTdmaCsMiscProvTableThis group contains general provisioning data for the
TdmaIwfCallServer that does not fit within other provisioning
groups. SEQUENCE OF MscTdmaCsMiscProvEntry .1.3.6.1.4.1.562.36.2.1.135.101 |
mscTdmaCsMiscProvEntryAn entry in the mscTdmaCsMiscProvTable. MscTdmaCsMiscProvEntry .1.3.6.1.4.1.562.36.2.1.135.101.1 |
mscTdmaCsCommentTextUse of this attribute is at the discretion of the system administrator.
Typically, this attribute is used to specify the name of the DMS-
MTX configured for this TdmaIwfCallServer plus any other
commentary information.rw AsciiString .1.3.6.1.4.1.562.36.2.1.135.101.1.1 |
mscTdmaCsMscIpAddressThis attribute specifies the Internet Protocol (IP) Address of the
Mobile Telephone Exchange (MTX) that is permitted to set up
MTX InterWorking Function (IWF) data calls using this
TdmaIwfCallServer. This address must be specified in order for this
TdmaIwfCallServer to provide service.
If call setups are attempted from an MSC which does not have this
address, those calls are rejected. The callsRequested statistic of this
TdmaIwfCallServer is incremented and appropriate call failure logs
are generated at the MSC.rw IpAddress .1.3.6.1.4.1.562.36.2.1.135.101.1.2 |
mscTdmaCsVirtualRouterNameThis attribute specifies the virtual router that this
TdmaIwfCallServer uses for transmitting and receiving signaling
messages to and from the DMS-MTX.rw RowPointer .1.3.6.1.4.1.562.36.2.1.135.101.1.3 |
mscTdmaCsVoiceLawThis attribute specifies the voice law to be established for the IWF
to PSTN modem link for calls established by this
TdmaIwfCallServer. This attribute has one of the following values:
aLaw: A protocol for encoding voice-band audio, Pulse Code
Modulation (PCM).
muLaw: A protocol for encoding voice-band audio, PCM.
Note that this value must match the voice law used at the DMS-
MTX connected to this TdmaIwfCallServer.rw Enumeration .1.3.6.1.4.1.562.36.2.1.135.101.1.4 |
mscTdmaCsCidDataTableThis group contains the attribute for a component's Customer
Identifier (CID). Refer to the attribute description for a detailed
explanation of CIDs. SEQUENCE OF MscTdmaCsCidDataEntry .1.3.6.1.4.1.562.36.2.1.135.103 |
mscTdmaCsCidDataEntryAn entry in the mscTdmaCsCidDataTable. MscTdmaCsCidDataEntry .1.3.6.1.4.1.562.36.2.1.135.103.1 |
mscTdmaCsCustomerIdentifierThis attribute holds the Customer Identifier (CID).
Every component has a CID. If a component has a cid attribute, the
component's CID is the provisioned value of that attribute;
otherwise the component inherits the CID of its parent. The top-
level component has a CID of 0.
Every operator session also has a CID, which is the CID
provisioned for the operator's user ID. An operator will see only the
stream data for components having a matching CID. Also, the
operator will be allowed to issue commands for only those
components which have a matching CID.
An operator CID of 0 is used to identify the Network Manager
(referred to as 'NetMan' in DPN). This CID matches the CID of
any component. Values 1 to 8191 inclusive (equivalent to 'basic
CIDs' in DPN) may be assigned to specific customers.rw Unsigned32 (0 | 1..8191) .1.3.6.1.4.1.562.36.2.1.135.103.1.1 |
mscTdmaCsStateTableThis group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. SEQUENCE OF MscTdmaCsStateEntry .1.3.6.1.4.1.562.36.2.1.135.104 |
mscTdmaCsStateEntryAn entry in the mscTdmaCsStateTable. MscTdmaCsStateEntry .1.3.6.1.4.1.562.36.2.1.135.104.1 |
mscTdmaCsAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.135.104.1.1 |
mscTdmaCsOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.ro Enumeration .1.3.6.1.4.1.562.36.2.1.135.104.1.2 |
mscTdmaCsUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.ro Enumeration .1.3.6.1.4.1.562.36.2.1.135.104.1.3 |
mscTdmaCsStatsTableThis group contains operational attributes that measure the
performance used for the calls set up by this particular
TdmaIwfCallServer. SEQUENCE OF MscTdmaCsStatsEntry .1.3.6.1.4.1.562.36.2.1.135.121 |
mscTdmaCsStatsEntryAn entry in the mscTdmaCsStatsTable. MscTdmaCsStatsEntry .1.3.6.1.4.1.562.36.2.1.135.121.1 |
mscTdmaCsCurrentCallsThis attribute indicates the number of active calls currently serviced
by this particular TdmaIwfCallServer.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.135.121.1.1 |
mscTdmaCsCallsRequestedThis attribute counts the number of IWF call setup requests received
at this particular TdmaIwfCallServer from the DMS-MTX. The
counter wraps when it exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.135.121.1.2 |
mscTdmaCsCallsSetUpThis attribute counts the number of IWF calls successfully setup by
this particular TdmaIwfCallServer. A call is considered setup when
the IWF-Setup-Request message is received, indicating a request
for a data communications service, and the IWF has successfully
allocated the necessary resources to fulfill the request. The counter
wraps when it exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.135.121.1.3 |
mscTdmaCsCallsReleasedNormalThis attribute counts the number of IWF calls that have completed
successfully on this particular TdmaIwfCallServer. The counter
wraps when it exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.135.121.1.4 |
mscTdmaCsCallsReleasedAbnormalThis attribute counts the number of IWF calls that have been
released due to error conditions at this particular
TdmaIwfCallServer or one if its TdmaIwfBearerChannel(s). The
counter wraps when it exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.135.121.1.5 |
mscTdmaCsErroredLFramesThis attribute counts the number of CM/IWF Control Interface
(CCI) messages received from the DMS-MTX that have an
incorrect format. The counter wraps when it exceeds the maximum
value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.135.121.1.6 |
mscTdmaBc OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.136 |
mscTdmaBcRowStatusTableThis entry controls the addition and deletion of
mscTdmaBc components. SEQUENCE OF MscTdmaBcRowStatusEntry .1.3.6.1.4.1.562.36.2.1.136.1 |
mscTdmaBcRowStatusEntryA single entry in the table represents a single
mscTdmaBc component. MscTdmaBcRowStatusEntry .1.3.6.1.4.1.562.36.2.1.136.1.1 |
mscTdmaBcRowStatusThis variable is used as the basis for SNMP naming of
mscTdmaBc components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.136.1.1.1 |
mscTdmaBcComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.136.1.1.2 |
mscTdmaBcStorageTypeThis variable represents the storage type value for the
mscTdmaBc tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.136.1.1.4 |
mscTdmaBcCsIndexThis variable represents an index for the mscTdmaBc tables. Integer32 .1.3.6.1.4.1.562.36.2.1.136.1.1.10 |
mscTdmaBcBcIndexThis variable represents an index for the mscTdmaBc tables. Integer32 .1.3.6.1.4.1.562.36.2.1.136.1.1.11 |
mscTdmaBcFramer OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.136.2 |
mscTdmaBcFramerRowStatusTableThis entry controls the addition and deletion of
mscTdmaBcFramer components. SEQUENCE OF MscTdmaBcFramerRowStatusEntry .1.3.6.1.4.1.562.36.2.1.136.2.1 |
mscTdmaBcFramerRowStatusEntryA single entry in the table represents a single
mscTdmaBcFramer component. MscTdmaBcFramerRowStatusEntry .1.3.6.1.4.1.562.36.2.1.136.2.1.1 |
mscTdmaBcFramerRowStatusThis variable is used as the basis for SNMP naming of
mscTdmaBcFramer components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.136.2.1.1.1 |
mscTdmaBcFramerComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.136.2.1.1.2 |
mscTdmaBcFramerStorageTypeThis variable represents the storage type value for the
mscTdmaBcFramer tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.136.2.1.1.4 |
mscTdmaBcFramerIndexThis variable represents the index for the mscTdmaBcFramer tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.136.2.1.1.10 |
mscTdmaBcFramerProvTableThis group contains the base provisioning data for the Framer
component. Application or hardware interface specific provisioning
data is contained in other provisionable Framer groups. SEQUENCE OF MscTdmaBcFramerProvEntry .1.3.6.1.4.1.562.36.2.1.136.2.10 |
mscTdmaBcFramerProvEntryAn entry in the mscTdmaBcFramerProvTable. MscTdmaBcFramerProvEntry .1.3.6.1.4.1.562.36.2.1.136.2.10.1 |
mscTdmaBcFramerInterfaceNameThis attribute contains a hardware component name.
The attribute associates the application with a specific link. This
defines the module processor on which Framer's parent component
(as well as Framer itself) will run.rw Link .1.3.6.1.4.1.562.36.2.1.136.2.10.1.1 |
mscTdmaBcFramerStatsTableThis group contains the operational statistics data for a
TdmaIwfFramer component. SEQUENCE OF MscTdmaBcFramerStatsEntry .1.3.6.1.4.1.562.36.2.1.136.2.11 |
mscTdmaBcFramerStatsEntryAn entry in the mscTdmaBcFramerStatsTable. MscTdmaBcFramerStatsEntry .1.3.6.1.4.1.562.36.2.1.136.2.11.1 |
mscTdmaBcFramerTxFramesThis attribute counts the number of frames transmitted to the link
interface by TdmaIwfFramer.
The counter wraps when it exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.136.2.11.1.1 |
mscTdmaBcFramerRxFramesThis attribute counts the number of frames received from the link
interface by TdmaIwfFramer.
The counter wraps when it exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.136.2.11.1.2 |
mscTdmaBcFramerRxBytesThis attribute counts the number of bytes received from the link
interface by TdmaIwfFramer.
The counter wraps when it exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.136.2.11.1.3 |
mscTdmaBcFramerLinkTableThis group contains provisionable attributes for the TdmaIwfFramer
which controls link layer framing for application components
sending and receiving data on a link interface for this particular
TdmaIwfBearerChannel. SEQUENCE OF MscTdmaBcFramerLinkEntry .1.3.6.1.4.1.562.36.2.1.136.2.12 |
mscTdmaBcFramerLinkEntryAn entry in the mscTdmaBcFramerLinkTable. MscTdmaBcFramerLinkEntry .1.3.6.1.4.1.562.36.2.1.136.2.12.1 |
mscTdmaBcFramerFramingTypeThis attribute indicates the type of framing for the link layer data
received and transmitted on this channel. This attribute has one of
the following values:
btdsFraming: Bit transparent framing for the
TdmaIwfBearerChannel components on MVP cards.
mtxFraming: DMS-MTX InterSystem Link Protocol (ISLP)
framing required for the TdmaIwfBearerChannel components on
DS1C/E1C cards.rw Enumeration .1.3.6.1.4.1.562.36.2.1.136.2.12.1.1 |
mscTdmaBcFramerStateTableThis group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. SEQUENCE OF MscTdmaBcFramerStateEntry .1.3.6.1.4.1.562.36.2.1.136.2.13 |
mscTdmaBcFramerStateEntryAn entry in the mscTdmaBcFramerStateTable. MscTdmaBcFramerStateEntry .1.3.6.1.4.1.562.36.2.1.136.2.13.1 |
mscTdmaBcFramerAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.136.2.13.1.1 |
mscTdmaBcFramerOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.ro Enumeration .1.3.6.1.4.1.562.36.2.1.136.2.13.1.2 |
mscTdmaBcFramerUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.ro Enumeration .1.3.6.1.4.1.562.36.2.1.136.2.13.1.3 |
mscTdmaBcModem OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.136.3 |
mscTdmaBcModemRowStatusTableThis entry controls the addition and deletion of
mscTdmaBcModem components. SEQUENCE OF MscTdmaBcModemRowStatusEntry .1.3.6.1.4.1.562.36.2.1.136.3.1 |
mscTdmaBcModemRowStatusEntryA single entry in the table represents a single
mscTdmaBcModem component. MscTdmaBcModemRowStatusEntry .1.3.6.1.4.1.562.36.2.1.136.3.1.1 |
mscTdmaBcModemRowStatusThis variable is used as the basis for SNMP naming of
mscTdmaBcModem components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.136.3.1.1.1 |
mscTdmaBcModemComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.136.3.1.1.2 |
mscTdmaBcModemStorageTypeThis variable represents the storage type value for the
mscTdmaBcModem tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.136.3.1.1.4 |
mscTdmaBcModemIndexThis variable represents the index for the mscTdmaBcModem tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.136.3.1.1.10 |
mscTdmaBcModemOperTableThis group contains operational attributes that measure performance
of the modem component for this particular
TdmaIwfBearerChannel. SEQUENCE OF MscTdmaBcModemOperEntry .1.3.6.1.4.1.562.36.2.1.136.3.10 |
mscTdmaBcModemOperEntryAn entry in the mscTdmaBcModemOperTable. MscTdmaBcModemOperEntry .1.3.6.1.4.1.562.36.2.1.136.3.10.1 |
mscTdmaBcModemVoiceLawThis attribute indicates the active voice law associated with the
modem component. This attribute has one of the following values:
aLaw and muLaw. Both protocols are utilized for encoding voice-
band audio. For additional information on each, refer to ITU-T
G.711 'Pulse Code Modulation (PCM) of Voice Frequencies'.ro Enumeration .1.3.6.1.4.1.562.36.2.1.136.3.10.1.1 |
mscTdmaBcModemRateThis attribute indicates the transmission rate of the current modem
in use. All rates are the same in both the transmit and receive
directions.ro Enumeration .1.3.6.1.4.1.562.36.2.1.136.3.10.1.2 |
mscTdmaBcModemModemAlgorithmInUseThis attribute indicates the current modem algorithm(s) active for
the channel. This attribute has one of the following values:
t30: T.30 is active. T.30 is the Group 3 fax protocol.
v17: V.17 is active.V.17 is an ITU-T 14400bit/s modem standard.
v21: V.21 is active. V.21 is an ITU-4 300bit/s modem standard.
v22: V.22 ia active. V.22 is an ITU-T modem standard that operates
at 1200bit/s and 600 baud.
v22bis: V.22bis is active. V.22bis is an ITU-T modem standard that
operates at 2400bit/s and 600 baud.
v27ter: V.27ter is active. V.27ter is an ITU-T 7200bit/s modem
standard.
v29: V.29 is active. V.29 is an ITU-T 9600bit/s modem standard.
v32: V.32 is active. V.32 is an ITU-T modem standard that operates
at 9600bit/s and 2400 baud.
v32bis: V.32bis is an ITU-T modem standard that operates at a
speed of 14.4kbit/s.
Description of bits:
t30(0)
v17(1)
v21(2)
v22(3)
v22bis(4)
v27ter(5)
v29(6)
v32(7)
v32bis(8)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.136.3.10.1.3 |
mscTdmaBcModemProtocolStateThis attribute indicates the active protocol state of the modem in
use.This attribute has one of the following values:
idle: Modem is in an inactive state and has no current connection
established.
training: Modem is attempting to establish a connection with the
far end modem via handshaking.
connected: Modem has establish a connection with the far end
modem.
releasing: Modem has begun tearing down the connection.ro Enumeration .1.3.6.1.4.1.562.36.2.1.136.3.10.1.4 |
mscTdmaBcModemMobileSideFlowControlStateThis attribute indicates the state of flow control based on whether
flow control was requested by the mobile side of the connection and
an indication was sent to an upper layer protocol. This attribute has
one of the following values:
on: Flow control is active towards the mobile side of the call.
off: Flow control is not active towards the mobile side of the call.
DESCRIPTIONro Enumeration .1.3.6.1.4.1.562.36.2.1.136.3.10.1.5 |
mscTdmaBcModemPstnSideFlowControlStateThis attribute indicates the state of flow control based on whether
flow control was requested by the PSTN side of the connection and
an indication was sent to the Digital Signal Processor. This attribute
has one of the following values:
on: Flow control is active towards the DSP (PSTN side of the call).
off: Flow control is not active towards the DSP (PSTN side of the
call).ro Enumeration .1.3.6.1.4.1.562.36.2.1.136.3.10.1.6 |
mscTdmaBcModemAsyncModeThis attribute indicates whether conversion between synchronous
and asynchronous data format (specifically, the stripping or
insertion of start and stop bits) is being performed. The value is on
unless the V.42 layer is active or it is a fax call. This attribute has
one of the following values:
on: Conversion between synchronous and asynchronous data is
being performed.
off: Conversion between synchronous and asynchronous data is not
being performed.ro Enumeration .1.3.6.1.4.1.562.36.2.1.136.3.10.1.7 |
mscTdmaBcModemOutbandFlowControlThis attribute indicates whether outband flow control conversions
are being performed. If outband flow control is on, then when the
Modem Application Layer (MAL) receives an xon or xoff from the
PSTN, the MAL converts the instruction into a primitive and sends
it to the Data Service Control (DSC). In the opposite direction with
outband flow control on, when the MAL receives a primitive from
the DSC, the MAL converts the primitive into an xon or xoff and
forwards it to the PSTN. If outband flow control is off, then all flow
control is handled inband. The modem performs either inband or
outband flow control unless V.42 layer is active, it is a fax call, or
no flow control was specified by the DMS-MTX. This attribute has
one of the following values:
on: Conversion to and from out-of-band signaling is enabled.
off: Conversion to and from out-of-band signaling is disabled.ro Enumeration .1.3.6.1.4.1.562.36.2.1.136.3.10.1.8 |
mscTdmaBcModemOutbandBreakThis attribute indicates whether inband or outband break control
conversions are being performed. If outband break control is on,
when the modem detects a break condition coming from the PSTN,
the Modem Application Layer (MAL) converts the instruction into a
primitive and forwards it to the Data Service Control (DSC). In the
opposite direction with outband break control on, when the MAL
receives a primitive from the DSC, the MAL converts the primitive
into a break and forwards it to the PSTN. When a break condition is
discovered all subsequent incoming data is discarded until a start bit
is received.ro Enumeration .1.3.6.1.4.1.562.36.2.1.136.3.10.1.9 |
mscTdmaBcModemAutobaudThis attribute indicates whether autobaud is active.
The modem is instructed at call setup time by the DMS-MTX on
the following:
(1) the initial modem data rate value, and
(2) whether a modem is allowed to perform autobauding (on) or not
(off).
With autobauding on, the modem is allowed to connect using a
valid modem data rate less than or equal to the initial rate specified
to the modem by the DMS-MTX. If a modem cannot perform
autobauding and the carrier cannot be established at the initial data
rate, the modem is disabled.ro Enumeration .1.3.6.1.4.1.562.36.2.1.136.3.10.1.10 |
mscTdmaBcModemStatsTableThis group contains operational attributes that measure performance
of the modem component for this particular
TdmaIwfBearerChannel. SEQUENCE OF MscTdmaBcModemStatsEntry .1.3.6.1.4.1.562.36.2.1.136.3.11 |
mscTdmaBcModemStatsEntryAn entry in the mscTdmaBcModemStatsTable. MscTdmaBcModemStatsEntry .1.3.6.1.4.1.562.36.2.1.136.3.11.1 |
mscTdmaBcModemTxBytesThis attribute counts the number of payload bytes transmitted.
The counter wraps when it exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.136.3.11.1.1 |
mscTdmaBcModemRxBytesThis attribute counts the number of payload bytes received.
The counter wraps when it exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.136.3.11.1.2 |
mscTdmaBcModemFramingErrorsThis attribute counts the number of framing errors detected by the
hardware. This is the absence of a stop bit after a start bit and eight
bits of data. All incoming data is discarded until the next start bit is
received.
The counter wraps when it exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.136.3.11.1.3 |
mscTdmaBcFax OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.136.4 |
mscTdmaBcFaxRowStatusTableThis entry controls the addition and deletion of
mscTdmaBcFax components. SEQUENCE OF MscTdmaBcFaxRowStatusEntry .1.3.6.1.4.1.562.36.2.1.136.4.1 |
mscTdmaBcFaxRowStatusEntryA single entry in the table represents a single
mscTdmaBcFax component. MscTdmaBcFaxRowStatusEntry .1.3.6.1.4.1.562.36.2.1.136.4.1.1 |
mscTdmaBcFaxRowStatusThis variable is used as the basis for SNMP naming of
mscTdmaBcFax components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.136.4.1.1.1 |
mscTdmaBcFaxComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.136.4.1.1.2 |
mscTdmaBcFaxStorageTypeThis variable represents the storage type value for the
mscTdmaBcFax tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.136.4.1.1.4 |
mscTdmaBcFaxIndexThis variable represents the index for the mscTdmaBcFax tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.136.4.1.1.10 |
mscTdmaBcFaxOperTableThis group contains operational attributes which measure the
performance of the fax protocol. SEQUENCE OF MscTdmaBcFaxOperEntry .1.3.6.1.4.1.562.36.2.1.136.4.10 |
mscTdmaBcFaxOperEntryAn entry in the mscTdmaBcFaxOperTable. MscTdmaBcFaxOperEntry .1.3.6.1.4.1.562.36.2.1.136.4.10.1 |
mscTdmaBcFaxActiveModeThis attribute indicates the mode of the fax T.30 protocol,
determined during Exchange Identification (XID) negotiations. The
following modes are supported:
normal: Normal T.30 protocol, Error Correction Mode (ECM) not
used.
ecm: Error Correction Mode used. Fax error correction is done
using a half-duplex page selective repeat technique.ro Enumeration .1.3.6.1.4.1.562.36.2.1.136.4.10.1.1 |
mscTdmaBcFaxProtocolStateThis attribute indicates the protocol state of the fax adaptor. This
attribute has one of the following values:
setup: Call setup state.
idle: Idle state only transmitting Synchronize (SYNC) frames.
bcsRx: Receiving Binary Coded Signal (BCS) packet from modem.
bcsTx: Transmitting BCS packet to modem.
msgRx: Receiving fax message from modem.
msgTx: Transmitting fax message to modem.ro Enumeration .1.3.6.1.4.1.562.36.2.1.136.4.10.1.2 |
mscTdmaBcFaxMessageRateThis attribute indicates the fax message rate used for sending fax
documents.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.136.4.10.1.3 |
mscTdmaBcFaxStatsTableThis group contains statistical attributes which measure the
performance of the fax protocol. SEQUENCE OF MscTdmaBcFaxStatsEntry .1.3.6.1.4.1.562.36.2.1.136.4.11 |
mscTdmaBcFaxStatsEntryAn entry in the mscTdmaBcFaxStatsTable. MscTdmaBcFaxStatsEntry .1.3.6.1.4.1.562.36.2.1.136.4.11.1 |
mscTdmaBcFaxTxPagesToMobileThe attribute counts the number of fax pages transmitted to the
mobile.
The counter wraps when it exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.136.4.11.1.1 |
mscTdmaBcFaxRxPagesFromMobileThis attribute counts the number of fax pages received from the
mobile.
The counter wraps when it exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.136.4.11.1.2 |
mscTdmaBcDce OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.136.5 |
mscTdmaBcDceRowStatusTableThis entry controls the addition and deletion of
mscTdmaBcDce components. SEQUENCE OF MscTdmaBcDceRowStatusEntry .1.3.6.1.4.1.562.36.2.1.136.5.1 |
mscTdmaBcDceRowStatusEntryA single entry in the table represents a single
mscTdmaBcDce component. MscTdmaBcDceRowStatusEntry .1.3.6.1.4.1.562.36.2.1.136.5.1.1 |
mscTdmaBcDceRowStatusThis variable is used as the basis for SNMP naming of
mscTdmaBcDce components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.136.5.1.1.1 |
mscTdmaBcDceComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.136.5.1.1.2 |
mscTdmaBcDceStorageTypeThis variable represents the storage type value for the
mscTdmaBcDce tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.136.5.1.1.4 |
mscTdmaBcDceIndexThis variable represents the index for the mscTdmaBcDce tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.136.5.1.1.10 |
mscTdmaBcDsc OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.136.6 |
mscTdmaBcDscRowStatusTableThis entry controls the addition and deletion of
mscTdmaBcDsc components. SEQUENCE OF MscTdmaBcDscRowStatusEntry .1.3.6.1.4.1.562.36.2.1.136.6.1 |
mscTdmaBcDscRowStatusEntryA single entry in the table represents a single
mscTdmaBcDsc component. MscTdmaBcDscRowStatusEntry .1.3.6.1.4.1.562.36.2.1.136.6.1.1 |
mscTdmaBcDscRowStatusThis variable is used as the basis for SNMP naming of
mscTdmaBcDsc components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.136.6.1.1.1 |
mscTdmaBcDscComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.136.6.1.1.2 |
mscTdmaBcDscStorageTypeThis variable represents the storage type value for the
mscTdmaBcDsc tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.136.6.1.1.4 |
mscTdmaBcDscIndexThis variable represents the index for the mscTdmaBcDsc tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.136.6.1.1.10 |
mscTdmaBcDscOperTableThis group contains operational attributes that measure the
performance of the DSC asynchronous data service. SEQUENCE OF MscTdmaBcDscOperEntry .1.3.6.1.4.1.562.36.2.1.136.6.10 |
mscTdmaBcDscOperEntryAn entry in the mscTdmaBcDscOperTable. MscTdmaBcDscOperEntry .1.3.6.1.4.1.562.36.2.1.136.6.10.1 |
mscTdmaBcDscP0CompressionDirectionThis attribute indicates the direction of compression requested from
logical link 0 (LL0). This attribute has one of the following values:
noCpmpression: No data compression.
compInitrResp: Compression initiator to responder.
compRespInitr: compression responder to initiator.
compBoth: compression in both directions.ro Enumeration .1.3.6.1.4.1.562.36.2.1.136.6.10.1.1 |
mscTdmaBcDscP1CompressionMaximumCodewordsThis attribute indicates the maximum number of codewords to be
requested from logical link 0 (LL0) for compression. A codeword is
a binary number that represents a string of characters.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.136.6.10.1.2 |
mscTdmaBcDscP2CompressionMaximumCharactersThis attribute indicates the maximum number of characters that can
be represented by a single codeword to be requested from logical
link 0 (LL0) for compression.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.136.6.10.1.3 |
mscTdmaBcDscStatsTableThis group contains statistical attributes that measure the
performance of the DSC asynchronous data service. SEQUENCE OF MscTdmaBcDscStatsEntry .1.3.6.1.4.1.562.36.2.1.136.6.11 |
mscTdmaBcDscStatsEntryAn entry in the mscTdmaBcDscStatsTable. MscTdmaBcDscStatsEntry .1.3.6.1.4.1.562.36.2.1.136.6.11.1 |
mscTdmaBcDscTxBytesThis attribute counts the number of data bytes relayed by DSC in
the transmit direction (towards the mobile).
The counter wraps when it exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.136.6.11.1.1 |
mscTdmaBcDscRxBytesThis attribute counts the number of data bytes relayed by DSC in
the receive direction (from the mobile).
The counter wraps when it exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.136.6.11.1.2 |
mscTdmaBcRlp1 OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.136.7 |
mscTdmaBcRlp1RowStatusTableThis entry controls the addition and deletion of
mscTdmaBcRlp1 components. SEQUENCE OF MscTdmaBcRlp1RowStatusEntry .1.3.6.1.4.1.562.36.2.1.136.7.1 |
mscTdmaBcRlp1RowStatusEntryA single entry in the table represents a single
mscTdmaBcRlp1 component. MscTdmaBcRlp1RowStatusEntry .1.3.6.1.4.1.562.36.2.1.136.7.1.1 |
mscTdmaBcRlp1RowStatusThis variable is used as the basis for SNMP naming of
mscTdmaBcRlp1 components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.136.7.1.1.1 |
mscTdmaBcRlp1ComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.136.7.1.1.2 |
mscTdmaBcRlp1StorageTypeThis variable represents the storage type value for the
mscTdmaBcRlp1 tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.136.7.1.1.4 |
mscTdmaBcRlp1IndexThis variable represents the index for the mscTdmaBcRlp1 tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.136.7.1.1.10 |
mscTdmaBcRlp1OperTableThis group contains operational attributes that measure performance
of the TdmaIwfBearerChannel. SEQUENCE OF MscTdmaBcRlp1OperEntry .1.3.6.1.4.1.562.36.2.1.136.7.10 |
mscTdmaBcRlp1OperEntryAn entry in the mscTdmaBcRlp1OperTable. MscTdmaBcRlp1OperEntry .1.3.6.1.4.1.562.36.2.1.136.7.10.1 |
mscTdmaBcRlp1Layer3L0ReqWinSizeThis attribute indicates the window size for Service Access Point
(SAP) 0 requested by layer 3. The window size is the maximum
number of sequentially numbered Information (I) frames that may
be unacknowledged at any given time.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.136.7.10.1.1 |
mscTdmaBcRlp1Layer3L1ReqWinSize1This attribute indicates the window size for Service Access Point
(SAP) 1 requested by layer 3. The window size is the maximum
number of sequentially numbered Information (I) frames that may
be unacknowledged at any given time.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.136.7.10.1.2 |
mscTdmaBcRlp1T1ResponseTimerThis attribute indicates the current T1 timer for Service Access
Points (SAP) 0 and 1 negotiated by the Radio Link Protocol 1
(RLP1), during Exchange Information (XID). This attribute
specifies the time the receiving RLP1 entity shall wait for a
response from the peer TIA-136-310 (formerly IS-130) application.
The value used for XID negotiations can be provisioned in the
TdmaCs/* Rlp1 t1ResponseTimer attribute.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.136.7.10.1.3 |
mscTdmaBcRlp1T2LinkActivityTimerThis attribute indicates the current T2 timer for Service Access
Points (SAP) 0 and 1 negotiated by the Radio Link Protocol 1
(RLP1), during Exchange Information (XID). This attribute
specifies the maximum time the receiving RLP1 entity shall wait for
link activity. The value used for XID negotiations can be
provisioned in the TdmaCs/* Rlp1 t2LinkActivityTimer attribute.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.136.7.10.1.4 |
mscTdmaBcRlp1T3PeerAckTimerThis attribute indicates the current T2 timer for Service Access
Points (SAP) 0 and 1 negotiated by the Radio Link Protocol 1
(RLP1), during Exchange Information (XID). The attribute specifies
the maximum time the receiving RLP1 entity shall wait for the peer
to ACK or NAK data. The value used for XID negotiations can be
provisioned in the TdmaCs/* Rlp1 t3PeerAckTimer attribute.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.136.7.10.1.5 |
mscTdmaBcRlp1StatsTableThis group contains operational attributes that measure performance
of the TdmaIwfBearerChannel. SEQUENCE OF MscTdmaBcRlp1StatsEntry .1.3.6.1.4.1.562.36.2.1.136.7.11 |
mscTdmaBcRlp1StatsEntryAn entry in the mscTdmaBcRlp1StatsTable. MscTdmaBcRlp1StatsEntry .1.3.6.1.4.1.562.36.2.1.136.7.11.1 |
mscTdmaBcRlp1TxFramesThis attribute counts the number of valid frames transmitted to the
mobile.
The counter wraps when it exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.136.7.11.1.1 |
mscTdmaBcRlp1RxFramesThis attributes counts the number of valid frames received from the
mobile.
The counter wraps when it exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.136.7.11.1.2 |
mscTdmaBcRlp1BadRxFramesThis attribute count the total number of bad RLP1 frames received
from the mobile.
The counter wraps when it exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.136.7.11.1.3 |
mscTdmaBcV42 OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.136.8 |
mscTdmaBcV42RowStatusTableThis entry controls the addition and deletion of
mscTdmaBcV42 components. SEQUENCE OF MscTdmaBcV42RowStatusEntry .1.3.6.1.4.1.562.36.2.1.136.8.1 |
mscTdmaBcV42RowStatusEntryA single entry in the table represents a single
mscTdmaBcV42 component. MscTdmaBcV42RowStatusEntry .1.3.6.1.4.1.562.36.2.1.136.8.1.1 |
mscTdmaBcV42RowStatusThis variable is used as the basis for SNMP naming of
mscTdmaBcV42 components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.136.8.1.1.1 |
mscTdmaBcV42ComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.136.8.1.1.2 |
mscTdmaBcV42StorageTypeThis variable represents the storage type value for the
mscTdmaBcV42 tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.136.8.1.1.4 |
mscTdmaBcV42IndexThis variable represents the index for the mscTdmaBcV42 tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.136.8.1.1.10 |
mscTdmaBcV42OperTableThis group contains operational attributes which measure V.42 error
detection and correction performance. SEQUENCE OF MscTdmaBcV42OperEntry .1.3.6.1.4.1.562.36.2.1.136.8.10 |
mscTdmaBcV42OperEntryAn entry in the mscTdmaBcV42OperTable. MscTdmaBcV42OperEntry .1.3.6.1.4.1.562.36.2.1.136.8.10.1 |
mscTdmaBcV42ProtocolStateThis attribute indicates the state of V.42. Valid states are:
notActive: The V.42 link connection with the PSTN modem is not
established. None of the V.42 functions including the error
detection, error correction, and flow control is provided to the data
call. This is the initial state of V.42.
disconnected: This means that the V42 link is disconnected.
linkSetup: The V.42 operation enters this state from the
disconnected state after the V.42 sends to the PSTN modem a Set
Asynchronous Balanced Mode Extended (SABME) frame in an
attempt to establish the error control connection with the PSTN
modem.
frameReject: The V.42 operation enters into this state after it
identifies an invalid frame sent by the peer and it sends back a frame
reject (FRMR) frame to the peer.
disconnectRequest: The V.42 operation enters into this state after it
sends to the peer a disconnect (DISC) frame with the attempt to
disconnect the V.42 error control link.
informationTransfer: The V.42 enters into this state after it receives
a UA (unnumbered acknowledgment) frame which the peer sent
upon receipt of the SAMBE frame from IWF V.42. Once in this
state, the V.42 can exchange data and supervisory information with
its peer.
waitingAck: The V.42 enters this state after it sends polling enquiry
to its peer. The V.42 sends the polling enquiry when it receives a
reject frame (REJ) from its peer or either its acknowledgment timer
or inactivity timer timed out on the information frames sent out.ro Enumeration .1.3.6.1.4.1.562.36.2.1.136.8.10.1.1 |
mscTdmaBcV42TxN401FrameSizeThis attribute indicates the current value of parameter N401 for
V.42 which is negotiated during Exchange Information (XID). This
is the maximum number of octets that can be carried in the
information field of an information frame that the IWF V.42
transmits to the PSTN modem. The IWF V.42 puts this or even
smaller size of data into the outgoing information frame. The value
used for XID negotiations can be provisioned via TdmaCs/* V42.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.136.8.10.1.2 |
mscTdmaBcV42RxN401FrameSizeThis attribute indicates the current value of N401, that is negotiated
during Exchange Identification (XID). This is the maximum number
of octets that can be carried in the information field of an
information frame received from the PSTN modem. An incoming
information frame carrying data octets more than this size shall be
rejected by the IWF V.42. The value used for XID negotiations can
be provisioned via TdmaCs/* V42.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.136.8.10.1.3 |
mscTdmaBcV42TxKWindowSizeThis attribute indicates the current value of k, that is negotiated
during Exchange Identification (XID). This is the size of flow
control sliding window used for the information frames that the
V.42 transmits to the PSTN modem. This size governs the
maximum number of information frames that the IWF V.42 error-
correcting entity can have outstanding (that is, unacknowledged).
The value used for XID negotiations can be provisioned via
TdmaCs/* V42.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.136.8.10.1.4 |
mscTdmaBcV42RxKWindowSizeThis attribute indicates the current value of k that is negotiated
during Exchange Identification (XID). This is the size of flow
control sliding window used for information frames transmitted
from the PSTN modem. This size governs the maximum number of
information frames that the peer of the IWF V.42 error-correcting
entity can have outstanding (that is, unacknowledged). The value
used for XID negotiations can be provisioned via TdmaCs/* V42.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.136.8.10.1.5 |
mscTdmaBcV42V42ActiveInCallThis attribute indicates whether V42 is really being used in this data
call.ro Enumeration .1.3.6.1.4.1.562.36.2.1.136.8.10.1.6 |
mscTdmaBcV42V42BisActiveInCallThis attribute indicates whether V42bis is really being used in this
data call.ro Enumeration .1.3.6.1.4.1.562.36.2.1.136.8.10.1.7 |
mscTdmaBcV42StatsTableThis group contains statistical attributes that measure the V.42 error
detection and correction performance. SEQUENCE OF MscTdmaBcV42StatsEntry .1.3.6.1.4.1.562.36.2.1.136.8.11 |
mscTdmaBcV42StatsEntryAn entry in the mscTdmaBcV42StatsTable. MscTdmaBcV42StatsEntry .1.3.6.1.4.1.562.36.2.1.136.8.11.1 |
mscTdmaBcV42RxIBytesThis attribute counts the total number of bytes that the V.42 actually
received from the PSTN modem in a data call.
The counter wraps when it exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.136.8.11.1.1 |
mscTdmaBcV42TxIBytesThis attribute counts the total number of bytes that the V.42
transmitted to the PSTN modem in a data call.
The counter wraps when it exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.136.8.11.1.2 |
mscTdmaBcV42RxIFramesThis attribute counts the total number of Information (I) frames that
the V.42 received from the PSTN modem in a data call.
The counter wraps when it exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.136.8.11.1.3 |
mscTdmaBcV42TxIFramesThis attribute counts the total number of information frames that the
V.42 transmitted to the PSTN modem in a data call.
The counter wraps when it exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.136.8.11.1.4 |
mscTdmaBcV42RetransmittedFramesThis attribute counts the total number of frames retransmitted by the
IWF V.42 entity in a data call. The V.42 retransmits the same frame
when the associated T401 acknowledgment timer timeouts or when
a Reject (REJ) supervisory frame has been received from the PSTN
modem.
The counter wraps when it exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.136.8.11.1.5 |
mscTdmaBcV42T1AckTimeoutsThis attribute counts the total number of times that the T401 timer
has timed out within a data call. If this timer times-out frequently,
the operator may need to adjust the provisioned parameter T401
acknowledgment timer to a larger time amount, since every time
that V.42 sends out a frame it sets the T401 timer to wait for the
peer's acknowledgment of the frame. When the timer times-out and
no acknowledgment has been received, the V.42 sends the same
frame to its peer.
The counter wraps when it exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.136.8.11.1.6 |
mscTdmaBcV42RemoteBusyIndicationsThis attribute counts the total number of times the PSTN modem
enters a busy state (the IWF has received a Receive Not Ready
message) and asks the IWF V.42 not to send Information (I) frames
to it until it is ready to receive information frames again (indicated
by receipt of a Receive Ready message or a data message).
The counter wraps when it exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.136.8.11.1.7 |
mscTdmaBcV42LocalBusyIndicationsThis attribute counts the total number of times the IWF V.42 enters
in a busy condition and asks the peer to stop sending information
frames until it has cleared up from the busy condition. The V.42
enters busy condition when its data buffer is about to be overflowed
by the incoming Information (I) frames.
The counter wraps when it exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.136.8.11.1.8 |
mscTdmaBcV42BadFramesRxThis attribute counts the total number of bad frames the IWF V.42
has received from the PSTN remote modem within the data call. In
this instance, 'bad frames' refer to the V.42 protocol error frames
other than the check sequence error frames.
The counter wraps when it exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.136.8.11.1.9 |
mscTdmaBcV42CrcErrorsRxThis attribute counts the total number of frames received from the
remote PSTN modem that contain incorrect frame check sequence.
A high value signifies the condition of the physical medium is poor.
The counter wraps when it exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.136.8.11.1.10 |
mscTdmaBcV42Bis OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.136.9 |
mscTdmaBcV42BisRowStatusTableThis entry controls the addition and deletion of
mscTdmaBcV42Bis components. SEQUENCE OF MscTdmaBcV42BisRowStatusEntry .1.3.6.1.4.1.562.36.2.1.136.9.1 |
mscTdmaBcV42BisRowStatusEntryA single entry in the table represents a single
mscTdmaBcV42Bis component. MscTdmaBcV42BisRowStatusEntry .1.3.6.1.4.1.562.36.2.1.136.9.1.1 |
mscTdmaBcV42BisRowStatusThis variable is used as the basis for SNMP naming of
mscTdmaBcV42Bis components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.136.9.1.1.1 |
mscTdmaBcV42BisComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.136.9.1.1.2 |
mscTdmaBcV42BisStorageTypeThis variable represents the storage type value for the
mscTdmaBcV42Bis tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.136.9.1.1.4 |
mscTdmaBcV42BisIndexThis variable represents the index for the mscTdmaBcV42Bis tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.136.9.1.1.10 |
mscTdmaBcV42BisOperTableThis group contains operational attributes that measure the
performance of IwfV42bis. SEQUENCE OF MscTdmaBcV42BisOperEntry .1.3.6.1.4.1.562.36.2.1.136.9.10 |
mscTdmaBcV42BisOperEntryAn entry in the mscTdmaBcV42BisOperTable. MscTdmaBcV42BisOperEntry .1.3.6.1.4.1.562.36.2.1.136.9.10.1 |
mscTdmaBcV42BisProtocolModeEncoderThis attribute indicates the current mode of the IwfV42bis encoder.
This mode can be either:
transparent: A mode of operation in which compression has been
selected but data is being transmitted in uncompressed form.
Transparent mode command sequences may be inserted into the
data stream.
compressed: A mode of operation in which data is transmitted in
codewords.
The encoder switches between the two modes depending on
whether the data coming from the Date Terminal Equipment (DTE)
is suitable for compression. The data compression function
periodically determines the compressibility of the data based on a
comparison of the number of bits required to represent a segment of
the data stream before and after compression.ro Enumeration .1.3.6.1.4.1.562.36.2.1.136.9.10.1.1 |
mscTdmaBcV42BisProtocolModeDecoderThis attribute indicates the current mode of the V.42bis decoder.
This mode can be either:
transparent: A mode of operation in which compression has been
selected but data is being transmitted in uncompressed form.
Transparent mode command sequences may be inserted into the
data stream.
compressed: A mode of operation in which data is transmitted in
codewords.
The encoder (at the mobile or PSTN) switches between the two
modes depending on whether the data coming from the Date
Terminal Equipment (DTE) is suitable for compression. The data
compression function periodically determines the compressibility of
the data based on a comparison of the number of bits required to
represent a segment of the data stream before and after
compression.ro Enumeration .1.3.6.1.4.1.562.36.2.1.136.9.10.1.2 |
mscTdmaBcV42BisP0CompressionDirectionThis attribute indicates the direction in which V.42bis is active,
negotiated at link setup by the data link protocol through Exchange
Identification (XID) negotiation of parameter P0 (compression
direction). The value used for XID negotiations can be provisioned
via TdmaCs/* V42bis. This attribute has one of the following
values:
noCompression: No data compression.
compInitrResp: The data sent by the IWF to the other entity is
compressed.
compRespInitr: The data received by the IWF from the other entity
is compressed.
compBoth: compression in both directions.ro Enumeration .1.3.6.1.4.1.562.36.2.1.136.9.10.1.3 |
mscTdmaBcV42BisP1MaximumCodewordsThis attribute indicates the maximum number of codewords in the
dictionary negotiated at link setup by the data link protocol by way
of the Exchange Identification (XID) negotiation of parameter P1
(number of codewords). The value used for XID negotiations can be
provisioned via TdmaCs/* V42bis.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.136.9.10.1.4 |
mscTdmaBcV42BisP2MaximumStringSizeThis attribute indicates the maximum number of characters allowed
in a string represented by a codeword negotiated at link setup by the
data link protocol by way of the Exchange Identification (XID)
negotiation of parameter P2 (maximum string size). The value used
for XID negotiations can be provisioned via TdmaCs/* V42bis.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.136.9.10.1.5 |
mscTdmaBcV42BisLastDecodeErrorThis attribute indicates last error found by the decoder. This
attribute has one of the following values:
none: No errors found.
badStepup: Receipt of STEPUP (step up codeword size) codeword
when it would cause C2 (current code word size) to exceed N1
(maximum code word size).
codewordEqC1: Receipt of a codeword, at any time, equal to C1
(next empty dictionary entry).
emptyCodeword: Receipt of a codeword representing an empty
dictionary entry.
reservedCommand: Receipt of a reserved command code.
generalError: Receipt of any other error.
The action taken by V.42bis on detecting an error is provisioned via
TdmaCs/* V42bis.ro Enumeration .1.3.6.1.4.1.562.36.2.1.136.9.10.1.6 |
mscTdmaBcV42BisCompRatioEncoderThis attribute indicates the number of uncompressed bytes divided
by the number of compressed bytes. A value greater than one means
that the data is being compressed. This is the compression ratio
achieved by the V.42bis encoder running on the Passport. This
attribute is relevant for both protocol modes transparent and
compressed as the encoder switches between the two modes.ro FixedPoint2 .1.3.6.1.4.1.562.36.2.1.136.9.10.1.7 |
mscTdmaBcV42BisCompRatioDecoderThis attribute indicates the number of uncompressed bytes divided
by the number of compressed bytes. A value greater than one means
that the data is being compressed. This is the compression ratio
achieved by the V.42bis encoder at the mobile or PSTN. This
attribute is relevant for both protocol modes transparent and
compressed as the encoder switches between the two modes.ro FixedPoint2 .1.3.6.1.4.1.562.36.2.1.136.9.10.1.8 |
mscTdmaBcV42BisStatsTableThis group contains statistical attributes that measure the
performance of IwfV42bis. SEQUENCE OF MscTdmaBcV42BisStatsEntry .1.3.6.1.4.1.562.36.2.1.136.9.11 |
mscTdmaBcV42BisStatsEntryAn entry in the mscTdmaBcV42BisStatsTable. MscTdmaBcV42BisStatsEntry .1.3.6.1.4.1.562.36.2.1.136.9.11.1 |
mscTdmaBcV42BisModeChangesEncodeThis attribute counts the number of mode changes (from transparent
to compressed or from compressed to transparent) by the encoder.
The counter wraps when it exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.136.9.11.1.1 |
mscTdmaBcV42BisModeChangesDecodeThis attribute counts the number of mode changes (from transparent
to compressed or from compressed to transparent) by the decoder.
The mode changes are determined by the encoder at the mobile or
the PSTN.
The counter wraps when it exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.136.9.11.1.2 |
mscTdmaBcV42BisResetsEncodeThis attribute counts the number of resets sent by the encoder. A
reset is a command code sent by the encoder to force dictionary
reinitialization.
The counter wraps when it exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.136.9.11.1.3 |
mscTdmaBcV42BisResetsDecodeThis attribute counts the number of resets received by the decoder.
A reset is a command code sent by the encoder to force dictionary
reinitialization. The resets of the decoder are determined by the
encoder at the mobile or PSTN.
The counter wraps when it exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.136.9.11.1.4 |
mscTdmaBcV42BisReinitializationsThis attribute counts the number of times V.42bis is reinitialized
because of a destructive break (a destructive break is a break that
causes data to be discarded) occurring on the error-corrected
connection initiated by either the mobile or PSTN.
The counter wraps when it exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.136.9.11.1.5 |
mscTdmaBcV42BisErrorsInDecodeThis attribute counts the number of errors found by the decoder.
The errors could be any of the following:
1.Receipt of STEPUP (step up codeword size) codeword when it
would cause C2 (current code word size) to exceed N1 (maximum
code word size).
2. Receipt of a codeword, at any time, equal to C1 (next empty
dictionary entry).
3. Receipt of a codeword representing an empty dictionary entry.
4. Receipt of a reserved command code.
5. Receipt of any other error.
The counter wraps when it exceeds the maximum value.
The action taken by V.42bis on detecting any of these errors is
provisioned via TdmaCs/* V42bis.ro Counter32 .1.3.6.1.4.1.562.36.2.1.136.9.11.1.6 |
mscTdmaBcUr OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.136.10 |
mscTdmaBcUrRowStatusTableThis entry controls the addition and deletion of
mscTdmaBcUr components. SEQUENCE OF MscTdmaBcUrRowStatusEntry .1.3.6.1.4.1.562.36.2.1.136.10.1 |
mscTdmaBcUrRowStatusEntryA single entry in the table represents a single
mscTdmaBcUr component. MscTdmaBcUrRowStatusEntry .1.3.6.1.4.1.562.36.2.1.136.10.1.1 |
mscTdmaBcUrRowStatusThis variable is used as the basis for SNMP naming of
mscTdmaBcUr components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.136.10.1.1.1 |
mscTdmaBcUrComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.136.10.1.1.2 |
mscTdmaBcUrStorageTypeThis variable represents the storage type value for the
mscTdmaBcUr tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.136.10.1.1.4 |
mscTdmaBcUrIndexThis variable represents the index for the mscTdmaBcUr tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.136.10.1.1.10 |
mscTdmaBcUrOperTableThis group contains operational attributes that measure the
performance of the UpperRelay. SEQUENCE OF MscTdmaBcUrOperEntry .1.3.6.1.4.1.562.36.2.1.136.10.10 |
mscTdmaBcUrOperEntryAn entry in the mscTdmaBcUrOperTable. MscTdmaBcUrOperEntry .1.3.6.1.4.1.562.36.2.1.136.10.10.1 |
mscTdmaBcUrRxBufferSizeThis attribute indicates the size of the receive flow control buffer.
This attribute may be viewed via TdmaBc/*,*,*,* UpperRelay.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.136.10.10.1.1 |
mscTdmaBcUrTxFlowControlStateThis attribute indicates whether the transmit flow control is active or
not. This attribute has one of the following values:
active: The transmit flow control is active.
inactive: The transmit flow control is inactive.
This attribute may be viewed via TdmaBc/*,*,*,* UpperRelay.ro Enumeration .1.3.6.1.4.1.562.36.2.1.136.10.10.1.2 |
mscTdmaBcUrRxFlowControlStateThis attribute indicates whether the receive flow control is active or
not. This attribute has one of the following values:
active: The receive flow control is active.
inactive: The receive flow control is inactive.
This attribute may be viewed via TdmaBc/*,*,*,* UpperRelay.ro Enumeration .1.3.6.1.4.1.562.36.2.1.136.10.10.1.3 |
mscTdmaBcUrStatsTableThis group contains operational attributes that measure the
performance of the UpperRelay. SEQUENCE OF MscTdmaBcUrStatsEntry .1.3.6.1.4.1.562.36.2.1.136.10.11 |
mscTdmaBcUrStatsEntryAn entry in the mscTdmaBcUrStatsTable. MscTdmaBcUrStatsEntry .1.3.6.1.4.1.562.36.2.1.136.10.11.1 |
mscTdmaBcUrTxFramesThis attribute counts the number of frames that are sent in the
transmit direction. The counter wraps when it exceeds the
maximum value.
The counter wraps when it exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.136.10.11.1.1 |
mscTdmaBcUrRxFramesThis attribute counts the number of frames that are sent in the
receive direction.
The counter wraps when it exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.136.10.11.1.2 |
mscTdmaBcUrUnacknowledgedFramesThis attribute indicates the current number of frames sent that have
not been acknowledged for this instance of the UpperRelay.
The counter wraps when it exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.136.10.11.1.3 |
mscTdmaBcUrCumUnacknowledgedFramesThis attribute is the total number of unacknowledged frames for this
instance of the UpperRelay. It is not reset when a new call starts.ro Counter32 .1.3.6.1.4.1.562.36.2.1.136.10.11.1.4 |
mscTdmaBcOperTableThis group contains operational attributes concerning the operation
of this particular TdmaIwfBearerChannel for the current or most
recent call. SEQUENCE OF MscTdmaBcOperEntry .1.3.6.1.4.1.562.36.2.1.136.101 |
mscTdmaBcOperEntryAn entry in the mscTdmaBcOperTable. MscTdmaBcOperEntry .1.3.6.1.4.1.562.36.2.1.136.101.1 |
mscTdmaBcStateThis attribute indicates the current state of the MSC/IWF Interface
Protocol (MIP) Message Router (MMR) for an IWF element. This
attribute has one of the following values:
idle: Startup state of IWF element.
setup: This call half is being set up.
active: This call half has been connected by both the MTX and IWF
and is active.
release: This call half is being released.ro Enumeration .1.3.6.1.4.1.562.36.2.1.136.101.1.1 |
mscTdmaBcCallTypeThis attribute indicates the current call type. This attribute has one
of the following values:
analogSpeech: Analog speech calls.
digitalSpeech: Digital speech calls.
analogPrefSpeech: Analog preferred speech calls.
digitalPrefSpeech: Digital preferred speech calls.
asyncData: Asynchronous data service calls.
g3Fax: Group 3 fax calls.
rejected: Rejected calls.
stuIII: STU III calls.
notUsedYet: Bearer Channel has not been used in a call yet.ro Enumeration .1.3.6.1.4.1.562.36.2.1.136.101.1.2 |
mscTdmaBcLastResponseCodeThis attribute indicates the MSC/IWF Interface Protocol (MIP)
Message Router (MMR) response code returned for the last call
which was active on this particular TdmaIwfBearerChannel. This
attribute has one of the following values:
noCause: No cause available.
unassignedNumber: Unallocated or unassigned number.
noRouteToDest: No route to destination.
normalClearing: The call was terminated normally.
userBusy: User busy.
noResponse: No carrier.
userNoAnswer: No answer from user.
invalidNumberFormat: Translation or routing problem.
unspecNormal: Normal, unspecified.
temporaryFailure: Temporary failure.
channelUnavailable: Channel unavailable.
resourceUnavailable: Resources unavailable to handle call.
qosUnavailabled: Specified rate of call unavailable.
serviceUnavailable: Service not implemented.
unimplementedOption: Option not implemented.
invalidCallRefValue: Invalid call reference value.
invalidChannel: Identified channel does not exist.
unspecInvalidMessage: Invalid message, unspecified.
missingMandatoryIe: Missing mandatory information element.
invalidMessageType: Message type not implemented.
incompatibleMessage: Message not compatible with call state.
timerRecovery: Recovery on timer expiration.
protocolError: Protocol error, unspecified.ro Enumeration .1.3.6.1.4.1.562.36.2.1.136.101.1.3 |
mscTdmaBcMateBearerChannelThis attribute contains the name of the mate
TdmaIwfBearerChannel that this TdmaIwfBearerChannel is
involved with in the currently active call.ro RowPointer .1.3.6.1.4.1.562.36.2.1.136.101.1.4 |
mscTdmaBcCidDataTableThis group contains the attribute for a component's Customer
Identifier (CID). Refer to the attribute description for a detailed
explanation of CIDs. SEQUENCE OF MscTdmaBcCidDataEntry .1.3.6.1.4.1.562.36.2.1.136.103 |
mscTdmaBcCidDataEntryAn entry in the mscTdmaBcCidDataTable. MscTdmaBcCidDataEntry .1.3.6.1.4.1.562.36.2.1.136.103.1 |
mscTdmaBcCustomerIdentifierThis attribute holds the Customer Identifier (CID).
Every component has a CID. If a component has a cid attribute, the
component's CID is the provisioned value of that attribute;
otherwise the component inherits the CID of its parent. The top-
level component has a CID of 0.
Every operator session also has a CID, which is the CID
provisioned for the operator's user ID. An operator will see only the
stream data for components having a matching CID. Also, the
operator will be allowed to issue commands for only those
components which have a matching CID.
An operator CID of 0 is used to identify the Network Manager
(referred to as 'NetMan' in DPN). This CID matches the CID of
any component. Values 1 to 8191 inclusive (equivalent to 'basic
CIDs' in DPN) may be assigned to specific customers.rw Unsigned32 (0 | 1..8191) .1.3.6.1.4.1.562.36.2.1.136.103.1.1 |
mscTdmaBcStateTableThis group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. SEQUENCE OF MscTdmaBcStateEntry .1.3.6.1.4.1.562.36.2.1.136.104 |
mscTdmaBcStateEntryAn entry in the mscTdmaBcStateTable. MscTdmaBcStateEntry .1.3.6.1.4.1.562.36.2.1.136.104.1 |
mscTdmaBcAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.136.104.1.1 |
mscTdmaBcOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.ro Enumeration .1.3.6.1.4.1.562.36.2.1.136.104.1.2 |
mscTdmaBcUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.ro Enumeration .1.3.6.1.4.1.562.36.2.1.136.104.1.3 |
tdmaIwfMIB OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.140 |
IMPORTS Unknown .1.3.6.1.4.1.562.36.2.2.140 |
tdmaIwfGroup OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.140.1 |
tdmaIwfGroupCA OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.140.1.1 |
tdmaIwfGroupCA02 OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.140.1.1.3 |
tdmaIwfGroupCA02A OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.140.1.1.3.2 |
tdmaIwfCapabilities OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.140.3 |
tdmaIwfCapabilitiesCA OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.140.3.1 |
tdmaIwfCapabilitiesCA02 OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.140.3.1.3 |
tdmaIwfCapabilitiesCA02A OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.140.3.1.3.2 |