Nortel-MsCarrier-MscPassport-IpiFrMIB
AI MIB Summary
Standard SNMP MIB module defining data structures for Nortel-MsCarrier-MscPassport-IpiFrMIB.
201
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
201 total| Object Name |
|---|
mscIpiFr OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.50 |
mscIpiFrRowStatusTableThis entry controls the addition and deletion of
mscIpiFr components. SEQUENCE OF MscIpiFrRowStatusEntry .1.3.6.1.4.1.562.36.2.1.50.1 |
mscIpiFrRowStatusEntryA single entry in the table represents a single
mscIpiFr component. MscIpiFrRowStatusEntry .1.3.6.1.4.1.562.36.2.1.50.1.1 |
mscIpiFrRowStatusThis variable is used as the basis for SNMP naming of
mscIpiFr components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.50.1.1.1 |
mscIpiFrComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.50.1.1.2 |
mscIpiFrStorageTypeThis variable represents the storage type value for the
mscIpiFr tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.50.1.1.4 |
mscIpiFrIndexThis variable represents the index for the mscIpiFr tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.50.1.1.10 |
mscIpiFrDna OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.50.2 |
mscIpiFrDnaRowStatusTableThis entry controls the addition and deletion of
mscIpiFrDna components. SEQUENCE OF MscIpiFrDnaRowStatusEntry .1.3.6.1.4.1.562.36.2.1.50.2.1 |
mscIpiFrDnaRowStatusEntryA single entry in the table represents a single
mscIpiFrDna component. MscIpiFrDnaRowStatusEntry .1.3.6.1.4.1.562.36.2.1.50.2.1.1 |
mscIpiFrDnaRowStatusThis variable is used as the basis for SNMP naming of
mscIpiFrDna components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.50.2.1.1.1 |
mscIpiFrDnaComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.50.2.1.1.2 |
mscIpiFrDnaStorageTypeThis variable represents the storage type value for the
mscIpiFrDna tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.50.2.1.1.4 |
mscIpiFrDnaIndexThis variable represents the index for the mscIpiFrDna tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.50.2.1.1.10 |
mscIpiFrDnaCug OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.50.2.2 |
mscIpiFrDnaCugRowStatusTableThis entry controls the addition and deletion of
mscIpiFrDnaCug components. SEQUENCE OF MscIpiFrDnaCugRowStatusEntry .1.3.6.1.4.1.562.36.2.1.50.2.2.1 |
mscIpiFrDnaCugRowStatusEntryA single entry in the table represents a single
mscIpiFrDnaCug component. MscIpiFrDnaCugRowStatusEntry .1.3.6.1.4.1.562.36.2.1.50.2.2.1.1 |
mscIpiFrDnaCugRowStatusThis variable is used as the basis for SNMP naming of
mscIpiFrDnaCug components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.50.2.2.1.1.1 |
mscIpiFrDnaCugComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.50.2.2.1.1.2 |
mscIpiFrDnaCugStorageTypeThis variable represents the storage type value for the
mscIpiFrDnaCug tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.50.2.2.1.1.4 |
mscIpiFrDnaCugIndexThis variable represents the index for the mscIpiFrDnaCug tables. Integer32 .1.3.6.1.4.1.562.36.2.1.50.2.2.1.1.10 |
mscIpiFrDnaCugCugOptionsTableThis group defines options for a CUG. Attributes in this group
define ClosedUserGroup options associated with interlockCode.
DNA's with the same CUG (interlockCode) can make calls within
this group. Various combinations which permit or prevent calls in
the same CUG group are defined here. SEQUENCE OF MscIpiFrDnaCugCugOptionsEntry .1.3.6.1.4.1.562.36.2.1.50.2.2.10 |
mscIpiFrDnaCugCugOptionsEntryAn entry in the mscIpiFrDnaCugCugOptionsTable. MscIpiFrDnaCugCugOptionsEntry .1.3.6.1.4.1.562.36.2.1.50.2.2.10.1 |
mscIpiFrDnaCugTypeThis attribute specifies the CUG type - the CUG is either a national
CUG, or an international CUG. International closed user groups are
usually established between DTEs for which there is an X.75
Gateway between; whereas national closed user groups are usually
established between DTEs for which there is no X.75 Gateway
between. (National CUGs cannot normally traverse an X.75
Gateway).
If this attribute is set to national, then the CUG is a national CUG,
in which case, the dnic should be left at its default value since it is
not part of a national CUG. If this attribute is set to international,
then the CUG is an international CUG, in which case, the dnic
should be set appropriately as part of the CUG interlockCode.rw Enumeration .1.3.6.1.4.1.562.36.2.1.50.2.2.10.1.1 |
mscIpiFrDnaCugDnicThis attribute specifies the dnic (Data Network ID Code) of the
CUG by which packet networks are identified. This attribute is not
applicable if the CUG is a national CUG, as specified by the CUG
type attribute. There are usually 1 or 2 dnics assigned per country,
for public networks. The U.S. is an exception where each BOC has
a dnic. Also, a group of private networks can have its own dnic.
dnic value is not an arbitrary number. It is assigned by international
agreement and controlled by CCITT.rw DigitString .1.3.6.1.4.1.562.36.2.1.50.2.2.10.1.2 |
mscIpiFrDnaCugInterlockCodeThis attribute specifies the CUG identifier of a national or
international CUG call. It is an arbitrary number and it also can be
called CUG in some descriptions. Interfaces (DNA's) defined with
this number can make calls to DNA's with the same interlockCode.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.50.2.2.10.1.3 |
mscIpiFrDnaCugIncCallsThis attribute, if set to allowed indicates that incoming calls (from
the network to the DTE) can be made using this particular CUG. If
set to disallowed, then incoming calls cannot be made using this
CUG - such calls will be cleared by the local DCE.
This attribute corresponds to the CCITT 'Incoming Calls Barred'
feature for CUGs in that incoming calls are barred if this attribute is
set to a value of disallowed.rw Enumeration .1.3.6.1.4.1.562.36.2.1.50.2.2.10.1.6 |
mscIpiFrDnaAddressTableAddress group contains attributes common to all Dna's. Every Dna
used in the network is defined with this group of 2 attributes. String
of address digits is complemented by type of address and Npi.
These attributes are used to interpret format of the address digits. SEQUENCE OF MscIpiFrDnaAddressEntry .1.3.6.1.4.1.562.36.2.1.50.2.10 |
mscIpiFrDnaAddressEntryAn entry in the mscIpiFrDnaAddressTable. MscIpiFrDnaAddressEntry .1.3.6.1.4.1.562.36.2.1.50.2.10.1 |
mscIpiFrDnaNumberingPlanIndicatorThis attribute indicates the Numbering Plan Indicator (NPI) of the
Dna that is entered. Address may belong to X.121 or E.164 plans.
X.121 is used in packet svitched data networks.rw Enumeration .1.3.6.1.4.1.562.36.2.1.50.2.10.1.1 |
mscIpiFrDnaDataNetworkAddressDna attribute contains digits which form unique identifier of the
customer interface. It can be compared (approximation only) to
telephone number where phone number identifies unique telephone
set. Dna digits are selected and assigned by network operators.
MaximumLenOfDna is 15digits.rw DigitString .1.3.6.1.4.1.562.36.2.1.50.2.10.1.2 |
mscIpiFrDnaOutgoingOptionsTableOutgoingOptions group defines call options of a Dna for calls
which are made out of the interface represented by Dna. All these
options are not used for calls arriving to the interface represented by
Dna. SEQUENCE OF MscIpiFrDnaOutgoingOptionsEntry .1.3.6.1.4.1.562.36.2.1.50.2.11 |
mscIpiFrDnaOutgoingOptionsEntryAn entry in the mscIpiFrDnaOutgoingOptionsTable. MscIpiFrDnaOutgoingOptionsEntry .1.3.6.1.4.1.562.36.2.1.50.2.11.1 |
mscIpiFrDnaOutCallsThis attribute, if set to a value of allowed indicates that outgoing
calls (from the DTE to the network) can be made using this
particular Dna. If set to a value of disallowed , then outgoing calls
cannot be made using this Dna - such calls will be cleared by the
local DCE. This attribute corresponds to the CCITT 'Outgoing Calls
Barred' feature for Dnas in that outgoing calls are barred if this
attribute is set to a value of disallowed. Either outCalls, or incCalls
(or both) must be set to a value of allowed for this Dna to be
useable.ro Enumeration .1.3.6.1.4.1.562.36.2.1.50.2.11.1.1 |
mscIpiFrDnaOutDefaultPriorityThis attribute, if set to normal indicates that the default priority for
outgoing calls (from the DTE to the network) using this particular
Dna is normal priority - if the priority is not specified by the DTE.
If this attribute is set to high then the default priority for outgoing
calls using this particular Dna is high priority.
It can be overridden by the discardPriority under DLCI Direct Call
subcomponent.ro Enumeration .1.3.6.1.4.1.562.36.2.1.50.2.11.1.7 |
mscIpiFrDnaOutDefaultPathSensitivityThis attribute specifies the default class of path sensitivity to
network for all outgoing calls using this particular Dna. The chosen
default class of path sensitivity applies to all outgoing calls
established using this Dna.
This attribute, if set to a value of throughput, indicates that the
default class is throughput sensitive. If set to a value of delay, then
the default class is delay sensitive. The default of
outDefaultPathSensitivity is delay.rwobsolete Enumeration .1.3.6.1.4.1.562.36.2.1.50.2.11.1.11 |
mscIpiFrDnaOutPathSensitivityOverRideIf this attribute is set to in the call request, the called end will use
the calling end provisioning data on path sensitivity to override its
own provisioning data.
The default of outPathSensitivityOverRide is yes.rwobsolete Enumeration .1.3.6.1.4.1.562.36.2.1.50.2.11.1.12 |
mscIpiFrDnaDefaultTransferPriorityThis attribute specifies the default transfer priority to network for
all outgoing calls using this particular Dna. It is overRidden by
the transferPriority provisioned in the DLCI Direct Call sub-
component.
The transfer priority is a preference specified by an application
according to its delay-sensitivity requirement. Frames with high
transfer priority are served by the network before the frames with
normal priority.
Each transfer priority contains a predetermined setting for trunk
queue (interrupting, delay or throughput), routing metric (delay or
throughput).
When the transfer priority is set at high, the trunk queue is set to
high, the routing metric is set to delay.
When the transfer priority is set at normal, the trunk queue is set to
normal, the routing metric is set to throughput.
The default of defaultTransferPriority is high.rw Enumeration .1.3.6.1.4.1.562.36.2.1.50.2.11.1.18 |
mscIpiFrDnaTransferPriorityOverRideWhen this attribute is set to yes, the called end will use the calling
end provisioning data on transfer priority to override its own
provisioning data. If it is set no, the called end will use its own
provisioning data on transfer priority.
For more information about transfer priority, please refer to the
previous attribute defaultTransferPriority.
The default of transferPriorityOverRide is yes.rw Enumeration .1.3.6.1.4.1.562.36.2.1.50.2.11.1.19 |
mscIpiFrDnaIncomingOptionsTableIncomingOptions defines set of options for incoming calls. These
options are used for calls arriving to the interface represented by
Dna. For calls originated from the interfasce, IncomingOptions
attributes are not used. SEQUENCE OF MscIpiFrDnaIncomingOptionsEntry .1.3.6.1.4.1.562.36.2.1.50.2.12 |
mscIpiFrDnaIncomingOptionsEntryAn entry in the mscIpiFrDnaIncomingOptionsTable. MscIpiFrDnaIncomingOptionsEntry .1.3.6.1.4.1.562.36.2.1.50.2.12.1 |
mscIpiFrDnaIncCallsThis attribute, if set to a value of allowed indicates that incoming
calls (from the network to the DTE) can be made to this Dna. If set
to a value of disallowed, then incoming calls cannot be made to this
Dna - such calls will be cleared by the local DCE. This attribute
corresponds to the CCITT 'Incoming Calls Barred' feature for Dna's
in that incoming calls are barred if this attribute is set to a value of
disallowed.
Either outCalls, or incCalls (or both) must be set to a value of
allowed for this Dna to be useable.ro Enumeration .1.3.6.1.4.1.562.36.2.1.50.2.12.1.1 |
mscIpiFrDnaIncAccessThis attribute is an extension of the Closed User Group (CUG)
facility, as follows:
This attribute, if set to a value of allowed indicates that incoming
calls (from the network to the DTE) from the open (non-CUG) part
of the network are permitted. It also permits incoming calls from
DTEs that have Outgoing Access capabilities. If set to a value of
disallowed, then such calls cannot be made to this Dna - such calls
will be cleared by the local DCE.
This attribute corresponds to the CCITT 'Closed User Group with
Incoming Access' feature for Dnas in that incoming access is
granted if this attribute is set to a value of allowed.rw Enumeration .1.3.6.1.4.1.562.36.2.1.50.2.12.1.9 |
mscIpiFrDnaCallOptionsTableCallOptions group defines additional options for calls not related
directly to direction of a call. SEQUENCE OF MscIpiFrDnaCallOptionsEntry .1.3.6.1.4.1.562.36.2.1.50.2.13 |
mscIpiFrDnaCallOptionsEntryAn entry in the mscIpiFrDnaCallOptionsTable. MscIpiFrDnaCallOptionsEntry .1.3.6.1.4.1.562.36.2.1.50.2.13.1 |
mscIpiFrDnaServiceCategoryThis attribute is assigned for each different type of service within
which this Dna is configured. It is placed into the Service Category
attribute in the accounting record by both ends of the Vc.ro Enumeration .1.3.6.1.4.1.562.36.2.1.50.2.13.1.1 |
mscIpiFrDnaAccountClassThis attribute specifies the accounting class which is reserved for
network operations usage. Its value is returned in the accounting
record in the local and remote service type attributes. Use of this
attribute is decided by network operator and it is an arbitrary
number.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.50.2.13.1.10 |
mscIpiFrDnaServiceExchangeThis attribute is an arbitrary number, entered by the network
operator. It is included in the accounting record created by Vc.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.50.2.13.1.12 |
mscIpiFrLcn OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.50.4 |
mscIpiFrLcnRowStatusTableThis entry controls the addition and deletion of
mscIpiFrLcn components. SEQUENCE OF MscIpiFrLcnRowStatusEntry .1.3.6.1.4.1.562.36.2.1.50.4.1 |
mscIpiFrLcnRowStatusEntryA single entry in the table represents a single
mscIpiFrLcn component. MscIpiFrLcnRowStatusEntry .1.3.6.1.4.1.562.36.2.1.50.4.1.1 |
mscIpiFrLcnRowStatusThis variable is used as the basis for SNMP naming of
mscIpiFrLcn components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.50.4.1.1.1 |
mscIpiFrLcnComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.50.4.1.1.2 |
mscIpiFrLcnStorageTypeThis variable represents the storage type value for the
mscIpiFrLcn tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.50.4.1.1.4 |
mscIpiFrLcnIndexThis variable represents the index for the mscIpiFrLcn tables. Integer32 .1.3.6.1.4.1.562.36.2.1.50.4.1.1.10 |
mscIpiFrLcnDc OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.50.4.2 |
mscIpiFrLcnDcRowStatusTableThis entry controls the addition and deletion of
mscIpiFrLcnDc components. SEQUENCE OF MscIpiFrLcnDcRowStatusEntry .1.3.6.1.4.1.562.36.2.1.50.4.2.1 |
mscIpiFrLcnDcRowStatusEntryA single entry in the table represents a single
mscIpiFrLcnDc component. MscIpiFrLcnDcRowStatusEntry .1.3.6.1.4.1.562.36.2.1.50.4.2.1.1 |
mscIpiFrLcnDcRowStatusThis variable is used as the basis for SNMP naming of
mscIpiFrLcnDc components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.50.4.2.1.1.1 |
mscIpiFrLcnDcComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.50.4.2.1.1.2 |
mscIpiFrLcnDcStorageTypeThis variable represents the storage type value for the
mscIpiFrLcnDc tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.50.4.2.1.1.4 |
mscIpiFrLcnDcIndexThis variable represents the index for the mscIpiFrLcnDc tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.50.4.2.1.1.10 |
mscIpiFrLcnDcOptionsTableOptions group defines attributes associated with direct call. It
defines complete connection in terms of path and call options. This
connection can be permanent (pvc) or, in future release, switched
(svc). It can have facilities. The total number of bytes of facilities
including the facility codes, and all of the facility data from all of
the four classes of facilities:
CCITT_Facilities
DTE_Facilities
National_Facilities
International_Facilities
must not exceed 512 bytes. SEQUENCE OF MscIpiFrLcnDcOptionsEntry .1.3.6.1.4.1.562.36.2.1.50.4.2.10 |
mscIpiFrLcnDcOptionsEntryAn entry in the mscIpiFrLcnDcOptionsTable. MscIpiFrLcnDcOptionsEntry .1.3.6.1.4.1.562.36.2.1.50.4.2.10.1 |
mscIpiFrLcnDcRemoteNpiRemoteNumbering Plan Indicator (Npi) indicates the numbering
plan used in the remoteDna.rw Enumeration .1.3.6.1.4.1.562.36.2.1.50.4.2.10.1.3 |
mscIpiFrLcnDcRemoteDnaThis attribute specifies the Data Network Address (Dna) of the
remote. This is the called (destination) DTE address (Dna) to which
this direct call will be sent. Initially, the called DTE address
attribute must be present, that is, there must be a valid destination
address. However, it may be possible in the future to configure the
direct call with a mnemonic address, in which case, this attribute
will contain a zero-length Dna, and the mnemonic address will be
carried as one of the facilities.rw DigitString .1.3.6.1.4.1.562.36.2.1.50.4.2.10.1.4 |
mscIpiFrLcnDcRemoteDlciThis attribute provides the value of the remote DLCI (Data Link
Connection Identifier)rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.50.4.2.10.1.5 |
mscIpiFrLcnDcTypeThis attribute specifies the type of Vc call:
permanentMaster,
permanentSlave,
If the value is set to permanentMaster, then a permanent
connection will be established between 2 ends. The remote end
must be defined as a permanentSlave, permanentBackupSlave or
permanentSlaveWithBackup. The connection cannot be established
if the remote end is defined as anything else. The end defined as
permanentMaster always initiates the calls. It will attempt to call
once per minute.
If the value is set to permanentSlave then a permanent connection
will be established between 2 ends. The remote end must be defined
as a permanentMaster. The connection cannot be established if the
remote end is defined as anything else. The permanentSlave end
will attempt to call once per minute.ro Enumeration .1.3.6.1.4.1.562.36.2.1.50.4.2.10.1.6 |
mscIpiFrLcnDcTransferPriorityThis attribute specifies the transfer priority to network for the
outgoing calls using this particular DLCI. It overRides the
defaultTransferPriority provisioned in its associated Dna
component.
The transfer priority is a preference specified by an application
according to its delay-sensitivity requirement. Frames with high
transfer priority are served by the network before the frames with
normal priority.
Each transfer priority contains a predetermined setting for trunk
queue (interrupting, delay or throughput), routing metric (delay or
throughput).
When the transfer priority is set at high, the trunk queue is set to
high, the routing metric is set to delay.
When the transfer priority is set at normal, the trunk queue is set to
normal, the routing metric is set to throughput.
The default of transferPriority is useDnaDefTP. It means using the
provisioning value under defaultTransferPriority of its associated
Dna for this DLCI.rw Enumeration .1.3.6.1.4.1.562.36.2.1.50.4.2.10.1.9 |
mscIpiFrLcnDcDiscardPriorityThis attribute specifies the discard priority for outgoing call using
this DLCI.
The discard priority has three provisioning values: normal, high,
and useDnaDefPriority. Traffic with normal priority are discarded
first than the traffic with high priority. The Dna default value
(provisioned by outDefaultPriority) is taken if this attribute is set
to the value useDnaDefPriority.
The default of discardPriority is useDnaDefPriority.rw Enumeration .1.3.6.1.4.1.562.36.2.1.50.4.2.10.1.10 |
mscIpiFrLcnDcNfaTableThis is the i'th National facility required for this direct call. Within
the provisioning system, the user specifies the facility code along
with the facility parameters. The facility is represented internally as
a hexadecimal string following the X.25 CCITT representation for
facility data.
Two explicit attributes discardPriority and transferPriority are
created to replace H.01 and H.30 in the group
VcsDirectCallOptionsProv of this file. The migrate escape here
(DcComponent::migrateFaxEscape) propagates the old
provisioning data under H.01.
The rule of the above propagation are: 0 in H.01 is equivalent to
discardPriority 0; 1 in H.01 is equivalent to discardPriority 1. And
0 in H.30 is equivalent to transferPriority normal; 1 in H.30 is
equivalent to transferPriority high.
Please refer to discardPriority and transferPriority for more
information on how to use them.obsolete SEQUENCE OF MscIpiFrLcnDcNfaEntry .1.3.6.1.4.1.562.36.2.1.50.4.2.222 |
mscIpiFrLcnDcNfaEntryAn entry in the mscIpiFrLcnDcNfaTable.obsolete MscIpiFrLcnDcNfaEntry .1.3.6.1.4.1.562.36.2.1.50.4.2.222.1 |
mscIpiFrLcnDcNfaIndexThis variable represents the index for the mscIpiFrLcnDcNfaTable.obsolete Integer32 (1) .1.3.6.1.4.1.562.36.2.1.50.4.2.222.1.1 |
mscIpiFrLcnDcNfaValueThis variable represents an individual value for the
mscIpiFrLcnDcNfaTable.rwobsolete HexString .1.3.6.1.4.1.562.36.2.1.50.4.2.222.1.2 |
mscIpiFrLcnDcNfaRowStatusThis variable is used to control the addition and deletion
of individual values of the mscIpiFrLcnDcNfaTable.rwobsolete RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.50.4.2.222.1.3 |
mscIpiFrLcnVc OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.50.4.3 |
mscIpiFrLcnVcRowStatusTableThis entry controls the addition and deletion of
mscIpiFrLcnVc components. SEQUENCE OF MscIpiFrLcnVcRowStatusEntry .1.3.6.1.4.1.562.36.2.1.50.4.3.1 |
mscIpiFrLcnVcRowStatusEntryA single entry in the table represents a single
mscIpiFrLcnVc component. MscIpiFrLcnVcRowStatusEntry .1.3.6.1.4.1.562.36.2.1.50.4.3.1.1 |
mscIpiFrLcnVcRowStatusThis variable is used as the basis for SNMP naming of
mscIpiFrLcnVc components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.50.4.3.1.1.1 |
mscIpiFrLcnVcComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.50.4.3.1.1.2 |
mscIpiFrLcnVcStorageTypeThis variable represents the storage type value for the
mscIpiFrLcnVc tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.50.4.3.1.1.4 |
mscIpiFrLcnVcIndexThis variable represents the index for the mscIpiFrLcnVc tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.50.4.3.1.1.10 |
mscIpiFrLcnVcCadTableThis group represents operational call data related to Frame Relay
Vc. It can be displayed only for Frame Relay Vc which is created by
application. SEQUENCE OF MscIpiFrLcnVcCadEntry .1.3.6.1.4.1.562.36.2.1.50.4.3.10 |
mscIpiFrLcnVcCadEntryAn entry in the mscIpiFrLcnVcCadTable. MscIpiFrLcnVcCadEntry .1.3.6.1.4.1.562.36.2.1.50.4.3.10.1 |
mscIpiFrLcnVcTypeThis attribute displays the type of call, pvc,svc,spvc or frf10spvc.ro Enumeration .1.3.6.1.4.1.562.36.2.1.50.4.3.10.1.1 |
mscIpiFrLcnVcStateThis attribute displays the state of call control. P5 state is not
supported but is listed for completness. Transitions from one state to
another take very short time. state most often displayed is
dataTransferP4.ro Enumeration .1.3.6.1.4.1.562.36.2.1.50.4.3.10.1.2 |
mscIpiFrLcnVcPreviousStateThis attribute displays the previous state of call control. This is a
valuable field to determine how the processing is progressing.ro Enumeration .1.3.6.1.4.1.562.36.2.1.50.4.3.10.1.3 |
mscIpiFrLcnVcDiagnosticCodeThis attribute displays the internal substate of call control. It is used
to further refine state of call processing.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.50.4.3.10.1.4 |
mscIpiFrLcnVcPreviousDiagnosticCodeThis attribute displays the internal substate of call control. It is used
to further refine state of call processing.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.50.4.3.10.1.5 |
mscIpiFrLcnVcCalledNpiThis attribute displays the Numbering Plan Indicator (NPI) of the
called end.ro Enumeration .1.3.6.1.4.1.562.36.2.1.50.4.3.10.1.6 |
mscIpiFrLcnVcCalledDnaThis attribute displays the Data Network Address (Dna) of the
called (destination) DTE to which this call is sent. This address if
defined at recieving end will complete Vc connection.ro DigitString .1.3.6.1.4.1.562.36.2.1.50.4.3.10.1.7 |
mscIpiFrLcnVcCalledLcnThis attribute displays the Logical Channel Number of the called
end. It is valid only after both ends of Vc exchanged relevant
information.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.50.4.3.10.1.8 |
mscIpiFrLcnVcCallingNpiThis attribute displays the Numbering Plan Indicator (NPI) of the
calling end.ro Enumeration .1.3.6.1.4.1.562.36.2.1.50.4.3.10.1.9 |
mscIpiFrLcnVcCallingDnaThis attribute displays the Data Network Address (Dna) of the
calling end.ro DigitString .1.3.6.1.4.1.562.36.2.1.50.4.3.10.1.10 |
mscIpiFrLcnVcCallingLcnThis attribute displays the Logical Channel Number of the calling
end.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.50.4.3.10.1.11 |
mscIpiFrLcnVcAccountingEnabledThis attribute indicates that this optional section of accounting
record is suppressed or permitted. If accountingEnabled is yes,
conditions for generation of accounting record were met. These
conditions include billing options, vc recovery conditions and
Module wide accounting data options.ro Enumeration .1.3.6.1.4.1.562.36.2.1.50.4.3.10.1.12 |
mscIpiFrLcnVcFastSelectCallThis attribute displays that this is a fast select call.ro Enumeration .1.3.6.1.4.1.562.36.2.1.50.4.3.10.1.13 |
mscIpiFrLcnVcPathReliabilityThis attribute displays the path reliability.ro Enumeration .1.3.6.1.4.1.562.36.2.1.50.4.3.10.1.19 |
mscIpiFrLcnVcAccountingEndThis attribute indicates if this end should generate an accounting
record. Normally, callingEnd is the end to generate an accounting
record.ro Enumeration .1.3.6.1.4.1.562.36.2.1.50.4.3.10.1.20 |
mscIpiFrLcnVcPriorityThis attribute displays whether the call is a normal or a high
priority call.ro Enumeration .1.3.6.1.4.1.562.36.2.1.50.4.3.10.1.21 |
mscIpiFrLcnVcSegmentSizeThis attribute displays the segment size (in bytes) used on the call.
It is used to calculate the number of segments transmitted and
received.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.50.4.3.10.1.22 |
mscIpiFrLcnVcMaxSubnetPktSizeThis attribute indicates the maximum packet size allowed on the Vc.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.50.4.3.10.1.27 |
mscIpiFrLcnVcRcosToNetworkThis attribute indicates the routing metric routing class of service to
the network.ro Enumeration .1.3.6.1.4.1.562.36.2.1.50.4.3.10.1.28 |
mscIpiFrLcnVcRcosFromNetworkThis attribute displays the routing metric Routing Class of Service
from the Network.ro Enumeration .1.3.6.1.4.1.562.36.2.1.50.4.3.10.1.29 |
mscIpiFrLcnVcEmissionPriorityToNetworkThis attribute displays the network internal emission priotity to the
network.ro Enumeration .1.3.6.1.4.1.562.36.2.1.50.4.3.10.1.30 |
mscIpiFrLcnVcEmissionPriorityFromNetworkThis attribute displays the network internal emission priotity from
the network.ro Enumeration .1.3.6.1.4.1.562.36.2.1.50.4.3.10.1.31 |
mscIpiFrLcnVcDataPathThis attribute indicates the data path used by the connection. The
data path is provisioned in Dna and DirectCall components. The
displayed value of this attribute can be different from the
provisioned value.
If the connection is using dprsOnly data path, the string
dprsOnly is displayed. (dynamic packet routing system)
If the connection is using dprsMcsOnly data path, the string
dprsMcsOnly is displayed.
If the connection is using dprsMcsFirst data path, the string
dprsMcsFirst is displayed.ro AsciiString .1.3.6.1.4.1.562.36.2.1.50.4.3.10.1.32 |
mscIpiFrLcnVcIntdTableThis group defines display of interval data collected by Vc. Data in
this group is variable and may depend on time when this display
command is issued. SEQUENCE OF MscIpiFrLcnVcIntdEntry .1.3.6.1.4.1.562.36.2.1.50.4.3.11 |
mscIpiFrLcnVcIntdEntryAn entry in the mscIpiFrLcnVcIntdTable. MscIpiFrLcnVcIntdEntry .1.3.6.1.4.1.562.36.2.1.50.4.3.11.1 |
mscIpiFrLcnVcCallReferenceNumberThis attribute is obsolete. It is replaced by the callReferenceNumber
attribute to display the call reference number in decimal. The
SNMP reference for the callReferenceNumber attribute is
callReferenceNumberDecimal.roobsolete Hex .1.3.6.1.4.1.562.36.2.1.50.4.3.11.1.1 |
mscIpiFrLcnVcElapsedTimeTillNowThis attribute displays the elapsed time representing the period of
this interval data. It is elapsed time in 0.1 second increments since
Vc started.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.50.4.3.11.1.2 |
mscIpiFrLcnVcSegmentsRxThis attribute displays the number of segments received at the time
command was issued. This is the segment received count
maintained by accounting at each end of the Vc. This counter is
updated only when the packet cannot be successfully delivered out
of the sink Vc and to the sink AP Conditions in which packets may
be discarded by the sink Vc include: missing packets due to subnet
discards, segmentation protocol violations due to subnet discard,
duplicated and out-of-ranged packets and packets that arrive while
Vc is in path recovery state.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.50.4.3.11.1.3 |
mscIpiFrLcnVcSegmentsSentThis attribute displays the number of segments sent at the time
command was issued. This is the segment sent count maintained by
accounting at the source Vc. Vc only counts packets that Vc thinks
can be delivered successfully into the subnet. In reality, these
packets may be dropped by trunking, for instance. This counter is
not updated when splitting fails, when Vc is in a path recovery state,
when packet forwarding fails to forward this packet and when
subsequent packets have to be discarded as we want to minimize the
chance of out-of-sequence and do not intentionally send out-of-
sequenced packets into the subnet.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.50.4.3.11.1.4 |
mscIpiFrLcnVcStartTimeThis attribute displays the start time of this interval period. If Vc
spans 12 hour time or time of day change startTime reflects new
time as recorded at 12 hour periods or time of day changes.ro EnterpriseDateAndTime .1.3.6.1.4.1.562.36.2.1.50.4.3.11.1.5 |
mscIpiFrLcnVcCallReferenceNumberDecimalThis attribute displays the call reference number which is a unique
number generated by the switch.The same Call Reference Number
is stored in the interval data (accounting record) at both ends of the
call. It can be used as one of the attributes in matching duplicate
records generated at each end of the call.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.50.4.3.11.1.7 |
mscIpiFrLcnVcFrdTableThis group defines Frame Relay attributes collected by Frame Relay
Vc.
The purpose of Vc attributes is to aid end users and verification
people to understand the Vc internal behavior. This is particularly
useful when the network has experienced abnormality and we want
to isolate problems and pinpoint trouble spots.
Attributes are collected on a per Vc basis. Until a need is identified,
statistics are not collected at a processor level. Each attribute is
stored in a 32 bit field and is initialized to zero when a Vc enters
into the data transfer state. When a PVC is disconnected and then
connected again, the attributes will be reset. Attributes cannot be
reset through other methods.
Frame Relay Vc uses a best effort data packet delivery protocol and
a different packet segmentation and combination methods from the
General Vc. The Frame Relay Vc uses the same call setup and
control mechanism (e.g. the support of non-flow control data
packets) as in a General Vc. Most General Vc statistics and internal
variables are used in a Frame Relay Vc and are displayed by
software developers SEQUENCE OF MscIpiFrLcnVcFrdEntry .1.3.6.1.4.1.562.36.2.1.50.4.3.12 |
mscIpiFrLcnVcFrdEntryAn entry in the mscIpiFrLcnVcFrdTable. MscIpiFrLcnVcFrdEntry .1.3.6.1.4.1.562.36.2.1.50.4.3.12.1 |
mscIpiFrLcnVcFrmCongestedToSubnetThis attribute displays the number of frames from link discarded
due to lack of resources. It keeps track of the number of frames
from link that have to be discarded. The discard reasons include
insufficient memory for splitting the frame into smaller subnet
packet size.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.50.4.3.12.1.2 |
mscIpiFrLcnVcCannotForwardToSubnetThis attribute displays the number of discarded packets that can not
be forwarded into the subnet because of subnet congestion.
Number of frames from link discarded due to failure in forwarding
a packet from Vc into the subnet.- This attribute is increased when
packet forwarding fails to forward a packet into the subnet. If a
frame is split into multiple subnet packets and a partial packet has
to be discarded, all subsequent partial packets that have not yet been
delivered to the subnet will be discarded as well.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.50.4.3.12.1.3 |
mscIpiFrLcnVcNotDataXferToSubnetThis attribute records the number of frames from link discarded
when the Vc tries to recover from internal path failure.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.50.4.3.12.1.4 |
mscIpiFrLcnVcOutOfRangeFrmFromSubnetThis attribute displays the number of frames from subnet discarded
due to out of sequence range for arriving too late.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.50.4.3.12.1.5 |
mscIpiFrLcnVcCombErrorsFromSubnetThis attribute records the number of subnet packets discarded at the
sink Vc due to the Vc segmentation and combination protocol error.
Usually, this occurs when the subnet discards packets and thus this
statistics can be used to guest the number of subnet packets that are
not delivered to the Vc. It cannot be used as an actual measure
because some subnet packets may have been delivered to Vc but
have to be discarded because these are partial packets to a frame in
which some other partial packets have not been properly delivered
to Vcro Unsigned32 .1.3.6.1.4.1.562.36.2.1.50.4.3.12.1.6 |
mscIpiFrLcnVcDuplicatesFromSubnetThis attribute displays the number of subnet packets discarded due
to duplication. Although packets are not retransmitted by the Frame
Relay Vc, it is possible for the subnet to retransmit packets. When
packets are out-of-sequenced and copies of the same packets arrive,
then this attribute is increased.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.50.4.3.12.1.7 |
mscIpiFrLcnVcNotDataXferFromSubnetThis attribute displays the number of subnet packets discarded when
data transfer is suspended in Vc recovery.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.50.4.3.12.1.8 |
mscIpiFrLcnVcFrmLossTimeoutsThis attribute displays the number of lost frame timer expiries.
When this count is excessive, the network is very congested and
packets have been discarded in the subnet.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.50.4.3.12.1.9 |
mscIpiFrLcnVcOoSeqByteCntExceededThis attribute displays the number times that the out of sequence
byte threshold is exceeded. When the threshold is exceeded, this
condition is treated as if the loss frame timer has expired and all
frames queued at the sink Vc are delivered to the AP. We need to
keep this count to examine if the threshold is engineered properly.
This should be used in conjunction with the peak value of out-of-
sequenced queue and the number of times the loss frame timer has
expired. This count should be relatively small when compared with
loss frame timer expiry count.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.50.4.3.12.1.10 |
mscIpiFrLcnVcPeakOoSeqPktCountThis attribute displays the frame relay peak packet count of the out
of sequence queue. This attribute records the maximum queue
length of the out-of-sequenced queue. The counter can be used to
deduce the message buffer requirement on a Vc.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.50.4.3.12.1.11 |
mscIpiFrLcnVcPeakOoSeqFrmForwardedThis attribute displays the frame relay peak size of the
sequence packet queue. The subnet may deliver packets out-of-
sequenced. These packets are then queued in an out-of-sequenced
queue, waiting for a packet with the expected sequence number to
come. When that packet arrives, this attribute records the maximum
number of packets that were out-of-sequenced, but now have
become in-sequenced. The statistics is used to measure expected
queue size due to normal subnet packet disorder (not due to subnet
packet discard). Current implementation also uses this statistics to
set a maximum size for the out-of-sequenced queue.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.50.4.3.12.1.12 |
mscIpiFrLcnVcSendSequenceNumberThis attribute displays the Vc internal packet's send sequence
number. Note that a 'packet' in this context, may be either a user
data packet, or an OAM frame.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.50.4.3.12.1.13 |
mscIpiFrLcnVcPktRetryTimeoutsThis attribute displays the number of packets which have
retransmission time-outs. When this count is excessive, the network
is very congested and packets have been discarded in the subnet.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.50.4.3.12.1.15 |
mscIpiFrLcnVcPeakRetryQueueSizeThis attribute displays the peak size of retransmission queue.
This attribute is used as an indicator of the acknowledgment
behavior across the subnet. Records the largest body of
unacknowledged packets.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.50.4.3.12.1.16 |
mscIpiFrLcnVcSubnetRecoveriesThis attribute displays the number of successful Vc recovery
attempts.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.50.4.3.12.1.17 |
mscIpiFrLcnVcOoSeqPktCntExceededThis attribute displays the number times that the out of sequence
packet threshold is exceeded. When the threshold is exceeded, this
condition is treated as if the loss frame timer has expired and all
frames queued at the sink Vc are delivered to the AP. We need to
keep this count to examine if the threshold is engineered properly.
This should be used in conjunction with the peak value of out-of-
sequenced queue and the number of times the loss frame timer has
expired. This count should be relatively small when compared with
loss frame timer expiry count.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.50.4.3.12.1.19 |
mscIpiFrLcnVcPeakOoSeqByteCountThis attribute displays the frame relay peak byte count of the out of
sequence queue. This attribute records the maximum queue length
of the out-of-sequenced queue. The counter can be used to deduce
the message buffer requirement on a Vc.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.50.4.3.12.1.20 |
mscIpiFrLcnVcDmepTableThis attribute displays the data path used by the connection. Data
path is provisioned in Dna and DirectCall components.
If the connection is using dprsOnly data path, this attribute is
empty.
If the connection is using dprsMcsOnly or dprsMcsFirst data path,
this attribute displays component name of the dprsMcsEndPoint. SEQUENCE OF MscIpiFrLcnVcDmepEntry .1.3.6.1.4.1.562.36.2.1.50.4.3.417 |
mscIpiFrLcnVcDmepEntryAn entry in the mscIpiFrLcnVcDmepTable. MscIpiFrLcnVcDmepEntry .1.3.6.1.4.1.562.36.2.1.50.4.3.417.1 |
mscIpiFrLcnVcDmepValueThis variable represents both the value and the index for the
mscIpiFrLcnVcDmepTable.ro RowPointer .1.3.6.1.4.1.562.36.2.1.50.4.3.417.1.1 |
mscIpiFrLcnStateTableThis group contains the three OSI State attributes and the six OSI
Status attributes. The descriptions generically indicate what each
attribute implies about the component. Note that not all the values
and state combinations described here are supported by every
component which uses this group. For component-specific
information and the valid state combinations, refer to NTP 241-
7001-150, Passport Operations and Maintenance Guide. SEQUENCE OF MscIpiFrLcnStateEntry .1.3.6.1.4.1.562.36.2.1.50.4.10 |
mscIpiFrLcnStateEntryAn entry in the mscIpiFrLcnStateTable. MscIpiFrLcnStateEntry .1.3.6.1.4.1.562.36.2.1.50.4.10.1 |
mscIpiFrLcnAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.50.4.10.1.1 |
mscIpiFrLcnOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.50.4.10.1.2 |
mscIpiFrLcnUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.50.4.10.1.3 |
mscIpiFrLcnAvailabilityStatusIf supported by the component, this attribute indicates the OSI
Availability status of the component. Note that, even though it is
defined as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value inTest indicates that the resource is undergoing a test
procedure. If adminState is locked or shuttingDown, the normal
users are precluded from using the resource and controlStatus is
reservedForTest. Tests that do not exclude additional users can be
present in any operational or administrative state but the
reservedForTest condition should not be present.
The value failed indicates that the component has an internal fault
that prevents it from operating. The operationalState is disabled.
The value dependency indicates that the component cannot operate
because some other resource on which it depends is unavailable.
The operationalState is disabled.
The value powerOff indicates the resource requires power to be
applied and it is not powered on. The operationalState is disabled.
The value offLine indicates the resource requires a routine
operation (either manual, automatic, or both) to be performed to
place it on-line and make it available for use. The operationalState
is disabled.
The value offDuty indicates the resource is inactive in accordance
with a predetermined time schedule. In the absence of other
disabling conditions, the operationalState is enabled or disabled.
The value degraded indicates the service provided by the
component is degraded in some way, such as in speed or operating
capacity. However, the resource remains available for service. The
operationalState is enabled.
The value notInstalled indicates the resource is not present. The
operationalState is disabled.
The value logFull is not used.
Description of bits:
inTest(0)
failed(1)
powerOff(2)
offLine(3)
offDuty(4)
dependency(5)
degraded(6)
notInstalled(7)
logFull(8)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.50.4.10.1.4 |
mscIpiFrLcnProceduralStatusIf supported by the component, this attribute indicates the OSI
Procedural status of the component. Note that, even though it is
defined as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value initializationRequired indicates (for a resource which
doesn't initialize autonomously) that initialization is required before
it can perform its normal functions, and this procedure has not been
initiated. The operationalState is disabled.
The value notInitialized indicates (for a resource which does
initialize autonomously) that initialization is required before it can
perform its normal functions, and this procedure has not been
initiated. The operationalState may be enabled or disabled.
The value initializing indicates that initialization has been initiated
but is not yet complete. The operationalState may be enabled or
disabled.
The value reporting indicates the resource has completed some
processing operation and is notifying the results. The
operationalState is enabled.
The value terminating indicates the component is in a termination
phase. If the resource doesn't reinitialize autonomously,
operationalState is disabled; otherwise it is enabled or disabled.
Description of bits:
initializationRequired(0)
notInitialized(1)
initializing(2)
reporting(3)
terminating(4)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.50.4.10.1.5 |
mscIpiFrLcnControlStatusIf supported by the component, this attribute indicates the OSI
Control status of the component. Note that, even though it is defined
as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value subjectToTest indicates the resource is available but tests
may be conducted simultaneously at unpredictable times, which
may cause it to exhibit unusual characteristics.
The value partOfServicesLocked indicates that part of the service is
restricted from users of a resource. The adminState is unlocked.
The value reservedForTest indicates that the component is
administratively unavailable because it is undergoing a test
procedure. The adminState is locked.
The value suspended indicates that the service has been
administratively suspended.
Description of bits:
subjectToTest(0)
partOfServicesLocked(1)
reservedForTest(2)
suspended(3)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.50.4.10.1.6 |
mscIpiFrLcnAlarmStatusIf supported by the component, this attribute indicates the OSI
Alarm status of the component. Note that, even though it is defined
as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value underRepair indicates the component is currently being
repaired. The operationalState is enabled or disabled.
The value critical indicates one or more critical alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value major indicates one or more major alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value minor indicates one or more minor alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value alarmOutstanding generically indicates that an alarm of
some severity is outstanding against the component.
Description of bits:
underRepair(0)
critical(1)
major(2)
minor(3)
alarmOutstanding(4)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.50.4.10.1.7 |
mscIpiFrLcnStandbyStatusIf supported by the component, this attribute indicates the OSI
Standby status of the component.
The value notSet indicates that either the attribute is not supported
or that none of the status conditions described below are present.
Note that this is a non-standard value, used because the original
specification indicated this attribute was set-valued and thus, did not
provide a value to indicate that none of the other three are
applicable.
The value hotStandby indicates that the resource is not providing
service but will be immediately able to take over the role of the
resource to be backed up, without initialization activity, and
containing the same information as the resource to be backed up.
The value coldStandby indicates the resource is a backup for
another resource but will not be immediately able to take over the
role of the backed up resource and will require some initialization
activity.
The value providingService indicates that this component, as a
backup resource, is currently backing up another resource.ro Enumeration .1.3.6.1.4.1.562.36.2.1.50.4.10.1.8 |
mscIpiFrLcnUnknownStatusThis attribute indicates the OSI Unknown status of the component.
The value false indicates that all of the other OSI State and Status
attribute values can be considered accurate.
The value true indicates that the actual state of the component is not
known for sure.ro Enumeration .1.3.6.1.4.1.562.36.2.1.50.4.10.1.9 |
mscIpiFrLcnOperTableThis group contains status of the internal IP network interface. SEQUENCE OF MscIpiFrLcnOperEntry .1.3.6.1.4.1.562.36.2.1.50.4.11 |
mscIpiFrLcnOperEntryAn entry in the mscIpiFrLcnOperTable. MscIpiFrLcnOperEntry .1.3.6.1.4.1.562.36.2.1.50.4.11.1 |
mscIpiFrLcnIpInterfaceDeviceThe status of the internal IP network interface is inactive until either
the remoteIpAddress attribute is provisioned, or an IP packet is
exchanged between a Network Management Station and the internal
IP network interface (via the LCN). At this point, the status changes
to active.ro Enumeration .1.3.6.1.4.1.562.36.2.1.50.4.11.1.1 |
mscIpiFrLcnOpRemoteIpAddressThis attribute indicates the IP address of the remote network device
connected to this interface. The value is either 0.0.0.0 until the frist
data packe tis received from the remote end, or is the value
provisioned in remoteIpAddress.ro IpAddress .1.3.6.1.4.1.562.36.2.1.50.4.11.1.2 |
mscIpiFrLcnPacketsSentThis attribute counts the number of IP packets sent from this
interface.ro Counter32 .1.3.6.1.4.1.562.36.2.1.50.4.11.1.3 |
mscIpiFrLcnPacketsReceivedThis attribute counts the number of IP packets received from the
remote network device.ro Counter32 .1.3.6.1.4.1.562.36.2.1.50.4.11.1.4 |
mscIpiFrLcnDiscardTxPacketsThis attribute counts the number of IP packets destined to the
remote end which were discarded by this interface.ro Counter32 .1.3.6.1.4.1.562.36.2.1.50.4.11.1.5 |
mscIpiFrLcnDiscardRcvPacketsThis attribute counts the number of IP packets received from the
remote end which were discarded by this interface.ro Counter32 .1.3.6.1.4.1.562.36.2.1.50.4.11.1.6 |
mscIpiFrLcnProvTableThis group provides the provisionable attributes for the IpiFR Lcn
component. SEQUENCE OF MscIpiFrLcnProvEntry .1.3.6.1.4.1.562.36.2.1.50.4.12 |
mscIpiFrLcnProvEntryAn entry in the mscIpiFrLcnProvTable. MscIpiFrLcnProvEntry .1.3.6.1.4.1.562.36.2.1.50.4.12.1 |
mscIpiFrLcnRemoteIpAddressThis attribute specifies the IP address of the remote device
connected to this Lcn interface. This device can be a host, and / or a
gateway. If the device is a gateway, and StaticRoutes are defined
using this gateway, it is recommended that this attribute be set. It is
also recommended to set this attribute, if management applications
such as Software Download and SNMP, which can initiate IP traffic
with Network Management Stations, are potentially using this Lcn
interface. IP routing information within IpiFr is not known or
activated for this Lcn interface until the remoteIpAddress is known.
When the destination IpAddress is left at its default value of 0.0.0.0,
the calling IP address is learnt from the first data packet received.rw IpAddress .1.3.6.1.4.1.562.36.2.1.50.4.12.1.1 |
mscIpiFrSr OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.50.5 |
mscIpiFrSrRowStatusTableThis entry controls the addition and deletion of
mscIpiFrSr components. SEQUENCE OF MscIpiFrSrRowStatusEntry .1.3.6.1.4.1.562.36.2.1.50.5.1 |
mscIpiFrSrRowStatusEntryA single entry in the table represents a single
mscIpiFrSr component. MscIpiFrSrRowStatusEntry .1.3.6.1.4.1.562.36.2.1.50.5.1.1 |
mscIpiFrSrRowStatusThis variable is used as the basis for SNMP naming of
mscIpiFrSr components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.50.5.1.1.1 |
mscIpiFrSrComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.50.5.1.1.2 |
mscIpiFrSrStorageTypeThis variable represents the storage type value for the
mscIpiFrSr tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.50.5.1.1.4 |
mscIpiFrSrIndexThis variable represents the index for the mscIpiFrSr tables. IpAddress .1.3.6.1.4.1.562.36.2.1.50.5.1.1.10 |
mscIpiFrSrProvTableThis group provides the provisionable parameters for setting up a
static route. SEQUENCE OF MscIpiFrSrProvEntry .1.3.6.1.4.1.562.36.2.1.50.5.10 |
mscIpiFrSrProvEntryAn entry in the mscIpiFrSrProvTable. MscIpiFrSrProvEntry .1.3.6.1.4.1.562.36.2.1.50.5.10.1 |
mscIpiFrSrGatewayIpAddressThe attribute specifies the IP Address of the next hop in this route to
the destination IP Address. For this static route to be active, the
value of this attribute must match the opRemoteIpAddress attribute
of one of the Lcn components.rw IpAddress .1.3.6.1.4.1.562.36.2.1.50.5.10.1.1 |
mscIpiFrSrBGtyIpaTableThe attribute specifies an ordered list of alternative gateways to use
for the route to the destination IP Address. This attribute is only
supported for the default route.
If the Lcn interface of the current gateway IP Address fails, then the
backupGatewayIpAddresses, listed in this attribute, are searched, in
order, for a gatewayIpAddress with an enabled Lcn. If found, the
static route to this destination IP Address is updated to use the
found gateway IP Address.
Note that an Lcn interface can fail due to either the Vc through the
Passport Network failing, or an Lmi indication that the far-end link
is failed. SEQUENCE OF MscIpiFrSrBGtyIpaEntry .1.3.6.1.4.1.562.36.2.1.50.5.327 |
mscIpiFrSrBGtyIpaEntryAn entry in the mscIpiFrSrBGtyIpaTable. MscIpiFrSrBGtyIpaEntry .1.3.6.1.4.1.562.36.2.1.50.5.327.1 |
mscIpiFrSrBGtyIpaIndexThis variable represents the index for the mscIpiFrSrBGtyIpaTable. Integer32 .1.3.6.1.4.1.562.36.2.1.50.5.327.1.1 |
mscIpiFrSrBGtyIpaValueThis variable represents an individual value for the
mscIpiFrSrBGtyIpaTable.rw IpAddress .1.3.6.1.4.1.562.36.2.1.50.5.327.1.2 |
mscIpiFrSrBGtyIpaRowStatusThis variable is used to control the addition and deletion
of individual values of the mscIpiFrSrBGtyIpaTable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.50.5.327.1.3 |
mscIpiFrR OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.50.6 |
mscIpiFrRRowStatusTable*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This entry controls the addition and deletion of
mscIpiFrR components. SEQUENCE OF MscIpiFrRRowStatusEntry .1.3.6.1.4.1.562.36.2.1.50.6.1 |
mscIpiFrRRowStatusEntryA single entry in the table represents a single
mscIpiFrR component. MscIpiFrRRowStatusEntry .1.3.6.1.4.1.562.36.2.1.50.6.1.1 |
mscIpiFrRRowStatusThis variable is used as the basis for SNMP naming of
mscIpiFrR components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.50.6.1.1.1 |
mscIpiFrRComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.50.6.1.1.2 |
mscIpiFrRStorageTypeThis variable represents the storage type value for the
mscIpiFrR tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.50.6.1.1.4 |
mscIpiFrRIndexThis variable represents the index for the mscIpiFrR tables. IpAddress .1.3.6.1.4.1.562.36.2.1.50.6.1.1.10 |
mscIpiFrROperTable*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This group contains operational status of the static route SEQUENCE OF MscIpiFrROperEntry .1.3.6.1.4.1.562.36.2.1.50.6.10 |
mscIpiFrROperEntryAn entry in the mscIpiFrROperTable. MscIpiFrROperEntry .1.3.6.1.4.1.562.36.2.1.50.6.10.1 |
mscIpiFrRGtyIpAddrThe attribute specifies the IP Address of the next hop in this route to
the destination IP Address.ro IpAddress .1.3.6.1.4.1.562.36.2.1.50.6.10.1.1 |
mscIpiFrRLcnIfThis attribute specifies the Lcn interface used by this IP route.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.50.6.10.1.3 |
mscIpiFrRTypeThis attribute indicates whether a route is going to a host or a
subnet or a network.ro Enumeration .1.3.6.1.4.1.562.36.2.1.50.6.10.1.4 |
mscIpiFrProvTableThis group provides the provisionable attributes for the IpiFr
component. SEQUENCE OF MscIpiFrProvEntry .1.3.6.1.4.1.562.36.2.1.50.10 |
mscIpiFrProvEntryAn entry in the mscIpiFrProvTable. MscIpiFrProvEntry .1.3.6.1.4.1.562.36.2.1.50.10.1 |
mscIpiFrIpAddressThis attribute specifies the unique Internet Protocol (IP) Address
that represents the IP address of the IPI service.rw IpAddress .1.3.6.1.4.1.562.36.2.1.50.10.1.1 |
mscIpiFrMaximumNumberOfLcnThis attribute specifies the maximum number of LCNs that are
supported on this service. It specifies the maximum number of
connections from external network management sites to this IpiFr
service.ro Unsigned32 (24) .1.3.6.1.4.1.562.36.2.1.50.10.1.2 |
mscIpiFrSubnetMaskThis attribute specifies the subnetwork mask for the IPI service.rw IpAddress .1.3.6.1.4.1.562.36.2.1.50.10.1.3 |
ipiFrMIB OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.35 |
IMPORTS Unknown .1.3.6.1.4.1.562.36.2.2.35 |
ipiFrGroup OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.35.1 |
ipiFrGroupCA OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.35.1.1 |
ipiFrGroupCA02 OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.35.1.1.3 |
ipiFrGroupCA02A OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.35.1.1.3.2 |
ipiFrCapabilities OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.35.3 |
ipiFrCapabilitiesCA OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.35.3.1 |
ipiFrCapabilitiesCA02 OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.35.3.1.3 |
ipiFrCapabilitiesCA02A OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.35.3.1.3.2 |