Nortel-MsCarrier-MscPassport-GsmIwfMIB
AI MIB Summary
Standard SNMP MIB module defining data structures for Nortel-MsCarrier-MscPassport-GsmIwfMIB.
386
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
386 total| Object Name |
|---|
mscGsmCs OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.127 |
mscGsmCsRowStatusTableThis entry controls the addition and deletion of
mscGsmCs components. SEQUENCE OF MscGsmCsRowStatusEntry .1.3.6.1.4.1.562.36.2.1.127.1 |
mscGsmCsRowStatusEntryA single entry in the table represents a single
mscGsmCs component. MscGsmCsRowStatusEntry .1.3.6.1.4.1.562.36.2.1.127.1.1 |
mscGsmCsRowStatusThis variable is used as the basis for SNMP naming of
mscGsmCs components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.127.1.1.1 |
mscGsmCsComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.127.1.1.2 |
mscGsmCsStorageTypeThis variable represents the storage type value for the
mscGsmCs tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.127.1.1.4 |
mscGsmCsTrunkGrpIndexThis variable represents the index for the mscGsmCs tables. Integer32 .1.3.6.1.4.1.562.36.2.1.127.1.1.10 |
mscGsmCsModem OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.127.2 |
mscGsmCsModemRowStatusTableThis entry controls the addition and deletion of
mscGsmCsModem components. SEQUENCE OF MscGsmCsModemRowStatusEntry .1.3.6.1.4.1.562.36.2.1.127.2.1 |
mscGsmCsModemRowStatusEntryA single entry in the table represents a single
mscGsmCsModem component. MscGsmCsModemRowStatusEntry .1.3.6.1.4.1.562.36.2.1.127.2.1.1 |
mscGsmCsModemRowStatusThis variable is used as the basis for SNMP naming of
mscGsmCsModem components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.127.2.1.1.1 |
mscGsmCsModemComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.127.2.1.1.2 |
mscGsmCsModemStorageTypeThis variable represents the storage type value for the
mscGsmCsModem tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.127.2.1.1.4 |
mscGsmCsModemIndexThis variable represents the index for the mscGsmCsModem tables. Enumeration .1.3.6.1.4.1.562.36.2.1.127.2.1.1.10 |
mscGsmCsRlp OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.127.3 |
mscGsmCsRlpRowStatusTableThis entry controls the addition and deletion of
mscGsmCsRlp components. SEQUENCE OF MscGsmCsRlpRowStatusEntry .1.3.6.1.4.1.562.36.2.1.127.3.1 |
mscGsmCsRlpRowStatusEntryA single entry in the table represents a single
mscGsmCsRlp component. MscGsmCsRlpRowStatusEntry .1.3.6.1.4.1.562.36.2.1.127.3.1.1 |
mscGsmCsRlpRowStatusThis variable is used as the basis for SNMP naming of
mscGsmCsRlp components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.127.3.1.1.1 |
mscGsmCsRlpComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.127.3.1.1.2 |
mscGsmCsRlpStorageTypeThis variable represents the storage type value for the
mscGsmCsRlp tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.127.3.1.1.4 |
mscGsmCsRlpIndexThis variable represents the index for the mscGsmCsRlp tables. Enumeration .1.3.6.1.4.1.562.36.2.1.127.3.1.1.10 |
mscGsmCsRlpProvTableThis group contains provisionable attributes for the Radio Link
Protocol (RLP) parameters used for the call set up by this particular
GsmIwfCallServer. Changes to these attributes do not effect existing
calls. SEQUENCE OF MscGsmCsRlpProvEntry .1.3.6.1.4.1.562.36.2.1.127.3.10 |
mscGsmCsRlpProvEntryAn entry in the mscGsmCsRlpProvTable. MscGsmCsRlpProvEntry .1.3.6.1.4.1.562.36.2.1.127.3.10.1 |
mscGsmCsRlpHighestVersionThis attribute specifies the highest version of the Radio Link
Protocol (RLP) protocol supported on this GsmIwfCallServer. Valid
values are:
0, Single-link basic version.
1, Single-link extended version (for example, extended by data
compression).
During the Exchange Information (XID) negotiation at the start of
the call, both RLP entities (mobile station and IWF) can agree to
use a particular RLP version. The IWF attempts to negotiate the
value specified by this attribute.
Note that if V.42bis data compression is be established between the
mobile station and IWF, both entities must agree to use version 1
(or higher).
The default value for highestVersion is 1 to enable support for
V.42bis data compression. The negotiated value can be viewed in
the component GsmIwfRlpOp attribute highestVersion.
Changes to this attribute do not effect existing calls.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.127.3.10.1.1 |
mscGsmCsRlpIwfToMsWindowSizeThis attribute specifies the maximum number of sequentially
numbered Information (I) frames that may be outstanding (that is,
unacknowledged) at any given time from the IWF to the mobile
station. GSM specification 4.22 defines the range as 0 to 61.
During the Exchange Information (XID) negotiation, both Radio
Link Protocol (RLP) entities (mobile station and IWF) can agree to
use a specific window size. The IWF attempts to negotiate to the
value specified by this attribute.
The negotiated value can be viewed in the component
GsmIwfRlpOp attribute iwfToMsWindowSize.
Changes to this attribute do not effect existing calls.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.127.3.10.1.2 |
mscGsmCsRlpMsToIwfWindowSizeThis attribute specifies the maximum number of sequentially
numbered Information (I) frames that may be outstanding (that is,
unacknowledged) at any given time from the mobile station to IWF.
GSM specification 4.22 defines the range as 0-61.
During the Exchange Information (XID) negotiation, both Radio
Link Protocol (RLP) entities (mobile station and IWF) can agree to
use a specific window size. The IWF attempts to negotiate to the
value specified by this attribute.
The negotiated value can be viewed in the component
GsmIwfRlpOp attribute msToIwfWindowSize. Changes to this
attribute do not effect existing calls.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.127.3.10.1.3 |
mscGsmCsRlpT1AckTimerThis attribute specifies the time in milliseconds within which an
acknowledgment of a sent frame must be received. Once this timer
expires, the transmitting Radio Link Protocol (RLP) entity shall
assume that the frame was lost.
During the Exchange Information (XID) negotiation, both RLP
entities (mobile station and IWF) can agree to use specific value for
this timer (T1). The IWF attempts to negotiate to the value specified
by this attribute.
The default value for t1AckTimer is 520 msec for the full14k5Rate
instance of this component, 480 msec for full12kRate, 540 msec for
full6kRate, and 780 msec for half6kRate. The negotiated value can
be viewed in the component GsmIwfRlpOp attribute t1AckTimer.
Changes to this attribute do not effect existing calls.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.127.3.10.1.4 |
mscGsmCsRlpT2AckDelayTimerThis attribute specifies the maximum time in milliseconds the
receiving Radio Link Protocol (RLP) entity shall wait before
sending an acknowledgment for a received information frame.
During the Exchange Information (XID) negotiation, both RLP
entities (mobile station and IWF) can agree to use specific value for
this timer (T2). The IWF attempts to negotiate to the value specified
by this attribute.
The negotiated value can be viewed in the component
GsmIwfRlpOp attribute t2AckDelayTimer.
Changes to this attribute do not effect existing calls.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.127.3.10.1.5 |
mscGsmCsRlpN2RetransmitCountThis attribute specifies the maximum number of times a Radio Link
Protocol (RLP) entity shall retransmit an individual frame following
the expiry of timer T1.
During the Exchange Information (XID) negotiation, both RLP
entities (mobile station and InterWorking Function (IWF)) can
agree to use specific value for N2 (Retransmit Count). The IWF
attempts to negotiate to the value specified by this attribute.
The negotiated value can be viewed in the component
GsmIwfRlpOp attribute n2RetransmitCount.
Changes to this attribute do not effect existing calls.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.127.3.10.1.6 |
mscGsmCsFax OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.127.4 |
mscGsmCsFaxRowStatusTableThis entry controls the addition and deletion of
mscGsmCsFax components. SEQUENCE OF MscGsmCsFaxRowStatusEntry .1.3.6.1.4.1.562.36.2.1.127.4.1 |
mscGsmCsFaxRowStatusEntryA single entry in the table represents a single
mscGsmCsFax component. MscGsmCsFaxRowStatusEntry .1.3.6.1.4.1.562.36.2.1.127.4.1.1 |
mscGsmCsFaxRowStatusThis variable is used as the basis for SNMP naming of
mscGsmCsFax components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.127.4.1.1.1 |
mscGsmCsFaxComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.127.4.1.1.2 |
mscGsmCsFaxStorageTypeThis variable represents the storage type value for the
mscGsmCsFax tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.127.4.1.1.4 |
mscGsmCsFaxIndexThis variable represents the index for the mscGsmCsFax tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.127.4.1.1.10 |
mscGsmCsFaxProvTableThis group contains the provisionable attributes for the fascimile
protocol (T.30 and GSM 03.45) for this particular
GsmIwfCallServer. Changes to these attributes do not effect existing
calls. SEQUENCE OF MscGsmCsFaxProvEntry .1.3.6.1.4.1.562.36.2.1.127.4.10 |
mscGsmCsFaxProvEntryAn entry in the mscGsmCsFaxProvTable. MscGsmCsFaxProvEntry .1.3.6.1.4.1.562.36.2.1.127.4.10.1 |
mscGsmCsFaxT1CalledToneTimerThis attribute specifies the delay to generate a Called (CED) tone at
the IWF after the called station is connected to the line for mobile
terminated calls. Changes to this attribute do not effect existing
calls.rw FixedPoint2 .1.3.6.1.4.1.562.36.2.1.127.4.10.1.1 |
mscGsmCsV42 OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.127.5 |
mscGsmCsV42RowStatusTableThis entry controls the addition and deletion of
mscGsmCsV42 components. SEQUENCE OF MscGsmCsV42RowStatusEntry .1.3.6.1.4.1.562.36.2.1.127.5.1 |
mscGsmCsV42RowStatusEntryA single entry in the table represents a single
mscGsmCsV42 component. MscGsmCsV42RowStatusEntry .1.3.6.1.4.1.562.36.2.1.127.5.1.1 |
mscGsmCsV42RowStatusThis variable is used as the basis for SNMP naming of
mscGsmCsV42 components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.127.5.1.1.1 |
mscGsmCsV42ComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.127.5.1.1.2 |
mscGsmCsV42StorageTypeThis variable represents the storage type value for the
mscGsmCsV42 tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.127.5.1.1.4 |
mscGsmCsV42IndexThis variable represents the index for the mscGsmCsV42 tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.127.5.1.1.10 |
mscGsmCsV42ProvTableThis group contains the provisionable attributes for the V.42
protocol for this particular GsmIwfCallServer. Changes to these
attributes do not effect existing calls. SEQUENCE OF MscGsmCsV42ProvEntry .1.3.6.1.4.1.562.36.2.1.127.5.10 |
mscGsmCsV42ProvEntryAn entry in the mscGsmCsV42ProvTable. MscGsmCsV42ProvEntry .1.3.6.1.4.1.562.36.2.1.127.5.10.1 |
mscGsmCsV42T400DetectTimerThis attribute specifies the maximum amount of time that the IWF
waits for an Originator Detection Pattern (ODP) or Answerer
Detection Pattern (ADP). ODP/ADP is a series of special bit
patterns used during the call setup procedures.
If the IWF is the Originator of the call, it starts sending ODP
patterns and waits for an ADP for the duration of T400 milliseconds
from the answerer at call setup time.
If the IWF is the Answerer of the call, it waits for an ODP for T400
seconds from the originator and if it receives during that time it
sends an ADP pattern to the originator at the call setup time. Since
both sides operate with different values of T400 timer, a higher
value increases the chance of a successful call setup.
Changes to this attribute do not effect existing calls.rw FixedPoint2 .1.3.6.1.4.1.562.36.2.1.127.5.10.1.1 |
mscGsmCsV42T401AckTimerThis attribute specifies the maximum amount of time that the IWF
waits for an acknowledgment before retransmitting a frame. Since
information about the T401 timer is not carried in the Exchange
Identification (XID) negotiations at call setup time, both sides
operate with different timer values. The value for T401 depends on
many factors, such as propagation delay or frame processing time.
A frame is retransmitted up to N400 times if the timer T401 expires
before an acknowledgment for a frame is actually received. The
performance of the data link layer can be impacted by the value of
this timer as retransmissions of frames occur on expiry of timer
T401.
Changes to this attribute do not effect existing calls.rw FixedPoint2 .1.3.6.1.4.1.562.36.2.1.127.5.10.1.2 |
mscGsmCsV42T402AckDelayTimerThis attribute specifies the maximum amount of time that the IWF
may wait following the receipt of any frame requiring a reply before
it initiates transmission of an appropriate reply in order to ensure
that the reply frame is received by the remote error-correcting entity
prior to expiration of the T401 timer of the remote error-correcting
entity. Since information about the T402 timer is not carried in the
Exchange Identification (XID) negotiations at call setup, both sides
operate with different timer values. If this timer expires, then the
reply that would have been returned prior to its expiration is not
sent. The performance of the data link layer can be impacted by the
value of this timer as retransmissions of frames occur on expiry of
timer T401. For better performance, a value of t402AckDelayTimer
(T402) equal to half the value of t401AckTimer (T401) is
recommended.
Changes to this attribute do not effect existing calls.rw FixedPoint2 .1.3.6.1.4.1.562.36.2.1.127.5.10.1.3 |
mscGsmCsV42T403IdleProbeTimerThis attribute specifies the maximum amount of time that the IWF
allows to elapse without frames being exchanged. The link is
permitted to remain idle with no frames being exchanged on the
data link. Upon expiry of this timer, the IWF polls its peer for
status. Since information about the T403 timer is not carried in the
Exchange Identification (XID) negotiations at call setup time, both
sides operate with different timer values.
Changes to this attribute do not effect existing calls.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.127.5.10.1.4 |
mscGsmCsV42TxN401FrameSizeThis attribute specifies the maximum number of octets that can be
carried in the information field of an Information (I) frame,
Exchange Identification (XID) frame, and a Unnumbered
Information (UI) frame from the IWF to the remote entity. The
default value is 128 octets, and no XID negotiations required for
txN401FrameSize. If the value for txN401FrameSize value is set to
other than 128 octets, then XID frames are exchanged to negotiate a
value. The value provided for txN401FrameSize sets up the bounds
during XID negotiations. The IWF performs XID negotiations with
this value as a minimum or maximum value. If a value greater than
128 is specified, then the IWF negotiates or attempts to negotiate a
value between the 128 (as a minimum) and the given value (as a
maximum). If a value less than 128 is specified, then the IWF
attempts to negotiate a value between the given value (as a
minimum) and 128 (as a maximum). Any value can be specified as
long as it is within the provisionable limits. However, a value equal
to or close to 128 is recommended.
The negotiated value can be viewed in the component
GsmIwfV42Op attribute txN401FrameSize. Changes to this attribute
do not effect existing calls.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.127.5.10.1.5 |
mscGsmCsV42RxN401FrameSizeThis attribute specifies the maximum number of octets that can be
carried in the information field of an Information (I) frame,
Exchange Identification (XID) frame, and a Unnumbered
Information (UI) frame from the remote entity to the IWF. The
default value is 128 octets, and no XID negotiations are required for
rxN401FrameSize. If the value set for rxN401FrameSize is other
than 128, XID frames are exchanged to negotiate a value. The value
provided for rxN401FrameSize sets up the bounds during XID
negotiations. The IWF performs XID negotiations with this value as
a minimum or maximum value. If a value greater than 128 is
specified, then the IWF attempts to negotiate for a value between
128 (as a minimum) and the given value (as a maximum). If a value
less than 128 value is specified, then the IWF attempts to negotiate
for a value between the given value (as a minimum) and 128 (as a
maximum). Any value can be specified as long as it is within the
provisionable limits. However, a value equal to or close to the
default is recommended.
The negotiated value can be viewed in the component
GsmIwfV42Op attribute rxN401FrameSize. Changes to this attribute
do not effect existing calls.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.127.5.10.1.6 |
mscGsmCsV42TxKwindowSizeThis attribute specifies the maximum number of outstanding
unacknowledged sequenced Information (I) frames from the IWF to
the remote entity. The default value is 15 frames, and if this value is
used then no Exchange Identification (XID) negotiations are
required for txKwindowSize. If the value set for txKwindowSize is
other than 15, then XID frames are exchanged to negotiate a value.
The value provided for txKwindowSize sets up the bounds during
XID negotiations. The IWF performs XID negotiations with this
value as a minimum or maximum value. If a value greater than 15 is
specified, then the IWF attempts to negotiate a value between 15 (as
a minimum) and the given value (as a maximum). If a value less
than 15 is specified, then the IWF attempts to negotiate for a value
between the given value (as a minimum) and 15 (as a maximum).
Any value can be specified as long at it is within the provisionable
limits. However, a value equal to or close to the default is
recommended.
The negotiated value can be viewed in the component
GsmIwfV42Op attribute txKwindowSize. Changes to this attribute do
not effect existing calls.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.127.5.10.1.7 |
mscGsmCsV42RxKwindowSizeThis attribute specifies the maximum number of outstanding
unacknowledged sequenced Information (I) frames from the remote
entity to the IWF. The default value is 15 frames, and if this value is
used then no Exchange Identification (XID) negotiations are
required for rxKwindowSize. If the value set for rxKwindowSize is
other than 15, then XID frames are exchanged to negotiate a value.
The value provided for rxKwindowSize sets up the bounds during
XID negotiations. The IWF performs XID negotiations with this
value as a minimum or maximum value. If a value greater than 15 is
specified, then the IWF attempts to negotiate a value between 15 (as
a minimum) and the given value (as a maximum). If a value less
than 15 is specified, then the IWF attempts to negotiate for a value
between the given value (as a minimum) and 15 (as a maximum).
Any value can be specified as long as it is within the provisionable
limits. However, a value equal to or close to the default is
recommended.
The negotiated value can be viewed in the component
GsmIwfV42Op attribute rxKwindowSize. Changes to this attribute
do not effect existing calls.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.127.5.10.1.8 |
mscGsmCsV42N400RetransLimitThis attribute specifies the maximum number of times the IWF
retransmits a frame upon expiry of t401AckTimer before
appropriate recovery action is taken. Information about N400
(Retransmission Limit) is not carried in the Exchange Identification
(XID) negotiation at call setup time so both sides operate with
different N400 values.
Changes to this attribute do not effect existing calls.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.127.5.10.1.9 |
mscGsmCsV42bis OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.127.6 |
mscGsmCsV42bisRowStatusTableThis entry controls the addition and deletion of
mscGsmCsV42bis components. SEQUENCE OF MscGsmCsV42bisRowStatusEntry .1.3.6.1.4.1.562.36.2.1.127.6.1 |
mscGsmCsV42bisRowStatusEntryA single entry in the table represents a single
mscGsmCsV42bis component. MscGsmCsV42bisRowStatusEntry .1.3.6.1.4.1.562.36.2.1.127.6.1.1 |
mscGsmCsV42bisRowStatusThis variable is used as the basis for SNMP naming of
mscGsmCsV42bis components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.127.6.1.1.1 |
mscGsmCsV42bisComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.127.6.1.1.2 |
mscGsmCsV42bisStorageTypeThis variable represents the storage type value for the
mscGsmCsV42bis tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.127.6.1.1.4 |
mscGsmCsV42bisIndexThis variable represents the index for the mscGsmCsV42bis tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.127.6.1.1.10 |
mscGsmCsV42bisProvTableThis group contains the provisionable attributes for the V.42bis data
compression protocol parameters used for the calls set up by this
particular GsmIwfCallServer. Changes to these attributes do not
effect existing calls. SEQUENCE OF MscGsmCsV42bisProvEntry .1.3.6.1.4.1.562.36.2.1.127.6.10 |
mscGsmCsV42bisProvEntryAn entry in the mscGsmCsV42bisProvTable. MscGsmCsV42bisProvEntry .1.3.6.1.4.1.562.36.2.1.127.6.10.1 |
mscGsmCsV42bisCompressionDirectionThis attribute specifies the V.42bis data compression direction to be
supported. The value for compression direction is negotiated at link
setup by the data link protocol by way of the Exchange
Identification (XID) negotiation of parameter P0 (compression
direction).
During XID negotiation of parameter P0, both sides (IWF and
mobile or IWF and Public Switched Telephone Network (PSTN))
agree on the compression direction.
Valid values are:
none, No compression is present.
encode, The data sent by the IWF to the other entity is compressed.
decode, The data received by the IWF from the other entity is
compressed.
both, The data sent and received by the IWF is compressed.
The negotiated value can be viewed in the component
GsmIwfV42bisOp attribute compressionDirection. Changes to this
attribute do not effect existing calls.rw Enumeration .1.3.6.1.4.1.562.36.2.1.127.6.10.1.1 |
mscGsmCsV42bisMaximumCodewordsThis attribute specifies the maximum number of V.42bis codewords
the IWF supports. A codeword is a binary number that represents a
string of characters in compressed form. V.42bis keeps a dictionary
of codewords for each compression direction. During Exchange
Identification (XID) negotiation of parameter P1 (number of
codewords), both sides (IWF and mobile or IWF and Public
Switched Telephone Network (PSTN)) agree on the total number of
codewords in the dictionaries. Changes to this attribute impact the
compression ratio for the encoder (component GsmV42BisOp
attribute compRatioEncoder). Changes also impact the amount of
memory used (more memory is used when increasing the attribute).
The gain in performance obtained from the selection of a larger
dictionary may be offset by the larger codeword size needed, and
for certain types of data, better performance may be obtained by
using a smaller dictionary.
The negotiated value can be viewed in the component
GsmIwfV42bisOp attribute maximumCodewords . Changes to this
attribute do not effect existing calls.rw Unsigned32 (512 | 1024 | 2048 | 4096) .1.3.6.1.4.1.562.36.2.1.127.6.10.1.2 |
mscGsmCsV42bisMaximumStringSizeThis attribute specifies the maximum number of characters allowed
in a string represented by a codeword that the IWF supports. Each
codeword in a V.42bis dictionary represents a string of characters.
During Exchange Identification (XID) negotiation of parameter P2
(maximum string size), both sides (IWF and mobile or IWF and
Public Switched Telephone Network (PSTN)) agree on the
maximum string length to be used in the dictionaries. Changes to
this attribute impact the compression ratio for the encoder
(component GsmIwfV42bisOp attribute compRatioEncoder).
The negotiated value can be viewed in the component
GsmIwfV42bisOp attribute maximumStringSize. Changes to this
attribute do not effect existing calls.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.127.6.10.1.3 |
mscGsmCsV42bisActionOnErrorThis attribute specifies whether or not V.42bis takes down the call
or resets the link when any of the following errors occur:
1.Receipt of STEPUP (step up codeword size) codeword when it
would cause C2 (current code word size) to exceed N1 (maximum
code word size).
2. Receipt of a codeword, at any time, equal to C1 (next empty
dictionary entry).
3. Receipt of a codeword representing an empty dictionary entry.
4. Receipt of a reserved command code.
5. Receipt of any other error.
If the value is resetLink, the error corrected connection and V.42bis
dictionaries are reset. Some data is lost but the call continues. If the
value is takeDownCall, the call is taken down.
Changes to this attribute do not effect existing calls.rw Enumeration .1.3.6.1.4.1.562.36.2.1.127.6.10.1.4 |
mscGsmCsLp OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.127.7 |
mscGsmCsLpRowStatusTableThis entry controls the addition and deletion of
mscGsmCsLp components. SEQUENCE OF MscGsmCsLpRowStatusEntry .1.3.6.1.4.1.562.36.2.1.127.7.1 |
mscGsmCsLpRowStatusEntryA single entry in the table represents a single
mscGsmCsLp component. MscGsmCsLpRowStatusEntry .1.3.6.1.4.1.562.36.2.1.127.7.1.1 |
mscGsmCsLpRowStatusThis variable is used as the basis for SNMP naming of
mscGsmCsLp components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.127.7.1.1.1 |
mscGsmCsLpComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.127.7.1.1.2 |
mscGsmCsLpStorageTypeThis variable represents the storage type value for the
mscGsmCsLp tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.127.7.1.1.4 |
mscGsmCsLpIndexThis variable represents the index for the mscGsmCsLp tables. Integer32 .1.3.6.1.4.1.562.36.2.1.127.7.1.1.10 |
mscGsmCsLpOperTableThis group contains operational attributes pertaining to information
about GsmIwfBearerChannels and logical processors associated
with a GsmIwfCallServer from a high-level view. SEQUENCE OF MscGsmCsLpOperEntry .1.3.6.1.4.1.562.36.2.1.127.7.10 |
mscGsmCsLpOperEntryAn entry in the mscGsmCsLpOperTable. MscGsmCsLpOperEntry .1.3.6.1.4.1.562.36.2.1.127.7.10.1 |
mscGsmCsLpConfiguredBearerChannelsThis attribute indicates the number of GsmIwfBearerChannel
components provisioned for the Logical Processor represented by
this component.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.127.7.10.1.1 |
mscGsmCsLpActiveCallsThis attribute indicates the number of GsmIwfBearerChannel
components currently active on this LogicalProcessor.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.127.7.10.1.2 |
mscGsmCsLpAssignedCapacityThis attribute indicates what percentage (0 to 100%) of a given
LogicalProcessor has been reserved for the data calls which are
currently active. When the assignedCapacity reaches 100%, no new
calls are established on the given LogicalProcessor. During the life
of a call, the compute requirements will vary. The compute capacity
required for a given call type depends on the type of call established
including such factors as connection type, data compression, user
rate, error correction, flow control; therefore, at call establishment
the compute capacity is added to the assignedCapacity for a
LogicalProcessor. When the call is released, it's compute capacity
is subtracted from the assigned capacity for the Lp.The
GsmIwfCallServer uses this information to balance the distribution
of data calls across the logical processors.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.127.7.10.1.3 |
mscGsmCsLpModemsSupportedThis attribute indicates if modems are supported with this
LogicalProcessor.ro Enumeration .1.3.6.1.4.1.562.36.2.1.127.7.10.1.4 |
mscGsmCsProvTableThis group contains general provisioning data for the
GsmIwfCallServer that does not fit within other provisioning
groups. SEQUENCE OF MscGsmCsProvEntry .1.3.6.1.4.1.562.36.2.1.127.100 |
mscGsmCsProvEntryAn entry in the mscGsmCsProvTable. MscGsmCsProvEntry .1.3.6.1.4.1.562.36.2.1.127.100.1 |
mscGsmCsCommentTextUse of this attribute is at the discretion of the system administrator.
Typically, this attribute specifies the name of the trunk group at the
Mobile Services-switching Center (MSC) configured for this
GsmIwfCallServer plus any other commentary information.rw AsciiString .1.3.6.1.4.1.562.36.2.1.127.100.1.1 |
mscGsmCsMscIpAddressThis attribute specifies the Internetwork Protocol (IP) Address of
the Mobile Services-switching Center (MSC) Control Module (CM)
that is permitted to set up GSM InterWorking Function (IWF) calls
using this GsmIwfCallServer. This address must be specified in
order for this GsmIwfCallServer to provide service. If call setups
are attempted from an MSC which does not have this address, those
calls are rejected.
The callsRequested statistic of this GsmIwfCallServer is
incremented, but the callsSetup statistic of this GsmIwfCallServer is
not, when call setup attempts are rejected. Also, at the MSC,
appropriate call failure logs are generated.rw IpAddress .1.3.6.1.4.1.562.36.2.1.127.100.1.2 |
mscGsmCsVirtualRouterNameThis attribute specifies the VirtualRouter that this
GsmIwfCallServer uses to transmit signaling messages to and
receive signaling messages from the Mobile Services-switching
Center (MSC) that utilizes this GsmIwfCallServer.rw RowPointer .1.3.6.1.4.1.562.36.2.1.127.100.1.4 |
mscGsmCsVoiceLawThis attribute specifies the voice law to be established for the IWF
to Public Switched Telephone Network (PSTN) modem link for
calls established by this GsmIwfCallServer. Valid values are:
aLaw, a protocol for encoding voice-band audio, Pulse Code
Modulation (PCM).
muLaw, a protocol for encoding voice-band audio, PCM.
Note that this value must match the voice law used at the Mobile
Services-switching Center (MSC) connected to this
GsmIwfCallServer.rw Enumeration .1.3.6.1.4.1.562.36.2.1.127.100.1.5 |
mscGsmCsCidDataTableThis group contains the attribute for a component's Customer
Identifier (CID). Refer to the attribute description for a detailed
explanation of CIDs. SEQUENCE OF MscGsmCsCidDataEntry .1.3.6.1.4.1.562.36.2.1.127.103 |
mscGsmCsCidDataEntryAn entry in the mscGsmCsCidDataTable. MscGsmCsCidDataEntry .1.3.6.1.4.1.562.36.2.1.127.103.1 |
mscGsmCsCustomerIdentifierThis attribute holds the Customer Identifier (CID).
Every component has a CID. If a component has a cid attribute, the
component's CID is the provisioned value of that attribute;
otherwise the component inherits the CID of its parent. The top-
level component has a CID of 0.
Every operator session also has a CID, which is the CID
provisioned for the operator's user ID. An operator will see only the
stream data for components having a matching CID. Also, the
operator will be allowed to issue commands for only those
components which have a matching CID.
An operator CID of 0 is used to identify the Network Manager
(referred to as 'NetMan' in DPN). This CID matches the CID of
any component. Values 1 to 8191 inclusive (equivalent to 'basic
CIDs' in DPN) may be assigned to specific customers.rw Unsigned32 (0 | 1..8191) .1.3.6.1.4.1.562.36.2.1.127.103.1.1 |
mscGsmCsStateTableThis group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. SEQUENCE OF MscGsmCsStateEntry .1.3.6.1.4.1.562.36.2.1.127.104 |
mscGsmCsStateEntryAn entry in the mscGsmCsStateTable. MscGsmCsStateEntry .1.3.6.1.4.1.562.36.2.1.127.104.1 |
mscGsmCsAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.127.104.1.1 |
mscGsmCsOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.ro Enumeration .1.3.6.1.4.1.562.36.2.1.127.104.1.2 |
mscGsmCsUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.ro Enumeration .1.3.6.1.4.1.562.36.2.1.127.104.1.3 |
mscGsmCsStatsTableThis group contains operational attributes that measure the
performance of this particular GsmIwfCallServer. SEQUENCE OF MscGsmCsStatsEntry .1.3.6.1.4.1.562.36.2.1.127.121 |
mscGsmCsStatsEntryAn entry in the mscGsmCsStatsTable. MscGsmCsStatsEntry .1.3.6.1.4.1.562.36.2.1.127.121.1 |
mscGsmCsCurrentCallsThis attribute indicates the number of active calls currently serviced
by this particular GsmIwfCallServer.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.127.121.1.1 |
mscGsmCsCallsRequestedThis attribute counts the number of IWF call setup requests received
at this particular GsmIwfCallServer from the Mobile Services-
switching Center (MSC). The counter wraps when it exceeds the
maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.127.121.1.2 |
mscGsmCsCallsSetupThis attribute counts the number of IWF calls successfully setup by
this particular GsmIwfCallServer. A call is considered setup when
the IWF-Setup-Request message is received, indicating a request
for a data communications service, and the IWF has successfully
allocated the necessary resources to fulfill the request. The counter
wraps when it exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.127.121.1.3 |
mscGsmCsCallsActivatedThis attribute counts the number of IWF calls successfully activated
by this particular GsmIwfCallServer. A call is considered activated
when the IWF receives an IWF-Activate-Request, indicating that
the call parties are connected and that data communications must
begin. The counter wraps when it exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.127.121.1.4 |
mscGsmCsCallsReleasedNormalThis attribute counts the number of IWF calls that have completed
successfully on this particular GsmIwfCallServer. The counter
wraps when it exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.127.121.1.5 |
mscGsmCsCallsReleasedAbnormalThis attribute counts the number of IWF calls that have been
released due to error conditions at this particular GsmIwfCallServer
or one if its GsmIwfBearerChannels. The counter wraps when it
exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.127.121.1.6 |
mscGsmCsChannelConfigChangesThis attribute counts the number of channel configuration requests
from the Mobile-services Switching Center (MSC) that have been
received at this GsmIwfCallServer and have resulted in successful
responses. The counter wraps when it exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.127.121.1.7 |
mscGsmCsChannelModeModifyRequestsThis attribute counts the number of channel mode modify requests
that have been generated by fax calls serviced by this particular
GsmIwfCallServer. The counter wraps when it exceeds the
maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.127.121.1.8 |
mscGsmCsStatusMessagesRxThis attribute counts the number of status messages received from
the Mobile Services-switching Center (MSC). The counter wraps
when it exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.127.121.1.9 |
mscGsmCsErroredMipFramesThis attribute counts the number of MSC/IWF Interface Protocol
(MIP) messages received from the Mobile Services-switching
Center (MSC) that were in error. The counter wraps when it
exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.127.121.1.10 |
mscGsmBc OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.128 |
mscGsmBcRowStatusTableThis entry controls the addition and deletion of
mscGsmBc components. SEQUENCE OF MscGsmBcRowStatusEntry .1.3.6.1.4.1.562.36.2.1.128.1 |
mscGsmBcRowStatusEntryA single entry in the table represents a single
mscGsmBc component. MscGsmBcRowStatusEntry .1.3.6.1.4.1.562.36.2.1.128.1.1 |
mscGsmBcRowStatusThis variable is used as the basis for SNMP naming of
mscGsmBc components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.128.1.1.1 |
mscGsmBcComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.128.1.1.2 |
mscGsmBcStorageTypeThis variable represents the storage type value for the
mscGsmBc tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.128.1.1.4 |
mscGsmBcTrunkGrpIndexThis variable represents an index for the mscGsmBc tables. Integer32 .1.3.6.1.4.1.562.36.2.1.128.1.1.10 |
mscGsmBcCicIndexThis variable represents an index for the mscGsmBc tables. Integer32 .1.3.6.1.4.1.562.36.2.1.128.1.1.11 |
mscGsmBcFramer OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.128.2 |
mscGsmBcFramerRowStatusTableThis entry controls the addition and deletion of
mscGsmBcFramer components. SEQUENCE OF MscGsmBcFramerRowStatusEntry .1.3.6.1.4.1.562.36.2.1.128.2.1 |
mscGsmBcFramerRowStatusEntryA single entry in the table represents a single
mscGsmBcFramer component. MscGsmBcFramerRowStatusEntry .1.3.6.1.4.1.562.36.2.1.128.2.1.1 |
mscGsmBcFramerRowStatusThis variable is used as the basis for SNMP naming of
mscGsmBcFramer components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.128.2.1.1.1 |
mscGsmBcFramerComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.128.2.1.1.2 |
mscGsmBcFramerStorageTypeThis variable represents the storage type value for the
mscGsmBcFramer tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.128.2.1.1.4 |
mscGsmBcFramerIndexThis variable represents the index for the mscGsmBcFramer tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.128.2.1.1.10 |
mscGsmBcFramerProvTableThis group contains the base provisioning data for the Framer
component. Application or hardware interface specific provisioning
data is contained in other provisionable Framer groups. SEQUENCE OF MscGsmBcFramerProvEntry .1.3.6.1.4.1.562.36.2.1.128.2.10 |
mscGsmBcFramerProvEntryAn entry in the mscGsmBcFramerProvTable. MscGsmBcFramerProvEntry .1.3.6.1.4.1.562.36.2.1.128.2.10.1 |
mscGsmBcFramerInterfaceNameThis attribute contains a hardware component name.
The attribute associates the application with a specific link. This
defines the module processor on which Framer's parent component
(as well as Framer itself) will run.rw Link .1.3.6.1.4.1.562.36.2.1.128.2.10.1.1 |
mscGsmBcFramerStatsTableThis group contains the operational statistics data for a Framer
component. SEQUENCE OF MscGsmBcFramerStatsEntry .1.3.6.1.4.1.562.36.2.1.128.2.11 |
mscGsmBcFramerStatsEntryAn entry in the mscGsmBcFramerStatsTable. MscGsmBcFramerStatsEntry .1.3.6.1.4.1.562.36.2.1.128.2.11.1 |
mscGsmBcFramerFrmToIfThis attribute counts the number of frames transmitted to the link
interface by Framer. The counter wraps when it exceeds the
maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.128.2.11.1.1 |
mscGsmBcFramerFrmFromIfThis attribute counts the number of frames received from the link
interface by Framer. The counter wraps when it exceeds the
maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.128.2.11.1.2 |
mscGsmBcFramerOctetFromIfThis attribute counts the number of bytes received from the link
interface by Framer. The counter wraps when it exceeds the
maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.128.2.11.1.3 |
mscGsmBcFramerCrcErrorsThis attribute coutns the the total number of frames with CRC
errors, occurring in the receive direction from the link. The counter
wraps when it exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.128.2.11.1.5 |
mscGsmBcFramerLrcErrorsThis attribute counts the total number of frames with LRC errors,
occurring in the Tx link prior to transmission onto the link. The
counter wraps when it exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.128.2.11.1.6 |
mscGsmBcFramerNonOctetErrorsThis attribute counts the total number of frames that were non octet
aligned. The counter wraps when it exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.128.2.11.1.7 |
mscGsmBcFramerOverrunsThis attribute counts the total number of frames received from the
link for which overruns occurred. The counter wraps when it
exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.128.2.11.1.8 |
mscGsmBcFramerUnderrunsThis attributecounts the total number of frames transmitted to the
link for which underruns occurred. The counter wraps when it
exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.128.2.11.1.9 |
mscGsmBcFramerLinkTableThis group contains provisionable attributes for the GsmIwfFramer
which controls link layer framing for application components
sending and receiving data on a link interface for this particular
GsmIwfBearerChannel. SEQUENCE OF MscGsmBcFramerLinkEntry .1.3.6.1.4.1.562.36.2.1.128.2.12 |
mscGsmBcFramerLinkEntryAn entry in the mscGsmBcFramerLinkTable. MscGsmBcFramerLinkEntry .1.3.6.1.4.1.562.36.2.1.128.2.12.1 |
mscGsmBcFramerFramingTypeThis attribute indicates the type of framing for the link layer data
received and transmitted on this channel. Valid values are:
BtdsFraming, bit transparent framing required for the
GsmIwfBearerChannel components on MVP cards.
GsmFraming, GSM framing for the GsmIwfBearerChannel
components on DS1C/E1C cards.rw Enumeration .1.3.6.1.4.1.562.36.2.1.128.2.12.1.1 |
mscGsmBcFramerStateTableThis group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. SEQUENCE OF MscGsmBcFramerStateEntry .1.3.6.1.4.1.562.36.2.1.128.2.13 |
mscGsmBcFramerStateEntryAn entry in the mscGsmBcFramerStateTable. MscGsmBcFramerStateEntry .1.3.6.1.4.1.562.36.2.1.128.2.13.1 |
mscGsmBcFramerAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.128.2.13.1.1 |
mscGsmBcFramerOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.ro Enumeration .1.3.6.1.4.1.562.36.2.1.128.2.13.1.2 |
mscGsmBcFramerUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.ro Enumeration .1.3.6.1.4.1.562.36.2.1.128.2.13.1.3 |
mscGsmBcLayer1 OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.128.3 |
mscGsmBcLayer1RowStatusTableThis entry controls the addition and deletion of
mscGsmBcLayer1 components. SEQUENCE OF MscGsmBcLayer1RowStatusEntry .1.3.6.1.4.1.562.36.2.1.128.3.1 |
mscGsmBcLayer1RowStatusEntryA single entry in the table represents a single
mscGsmBcLayer1 component. MscGsmBcLayer1RowStatusEntry .1.3.6.1.4.1.562.36.2.1.128.3.1.1 |
mscGsmBcLayer1RowStatusThis variable is used as the basis for SNMP naming of
mscGsmBcLayer1 components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.128.3.1.1.1 |
mscGsmBcLayer1ComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.128.3.1.1.2 |
mscGsmBcLayer1StorageTypeThis variable represents the storage type value for the
mscGsmBcLayer1 tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.128.3.1.1.4 |
mscGsmBcLayer1IndexThis variable represents the index for the mscGsmBcLayer1 tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.128.3.1.1.10 |
mscGsmBcLayer1OperTableThis group contains physical layer operational attributes concerning
the operation of this particular GsmIwfBearerChannel. SEQUENCE OF MscGsmBcLayer1OperEntry .1.3.6.1.4.1.562.36.2.1.128.3.10 |
mscGsmBcLayer1OperEntryAn entry in the mscGsmBcLayer1OperTable. MscGsmBcLayer1OperEntry .1.3.6.1.4.1.562.36.2.1.128.3.10.1 |
mscGsmBcLayer1ActiveModeThis attribute indicates the active physical layer protocol between
the mobile and the IWF. Valid values are:
v110, GSM V.110 rate adaptation scheme for interworking V-series
connections to an Integrated Services Digital Network (ISDN).
aTrau, GSM A-Transcoder/Rate Adaptor (A-TRAU).ro Enumeration .1.3.6.1.4.1.562.36.2.1.128.3.10.1.1 |
mscGsmBcLayer1ConnectionThis attribute indicates the connection between the mobile and the
IWF. Valid values are:
transparent, Constant throughput, constant transit delay, and
variable error rate (does not use Radio Link Protocol).
nonTransparent, Improved error rate with variable transit delay and
variable throughput (uses Radio Link Protocol).ro Enumeration .1.3.6.1.4.1.562.36.2.1.128.3.10.1.2 |
mscGsmBcLayer1DataRateThis attribute indicates the layer 1 user data rate for the currently
active call for this GsmIwfBearerChannel. This is the data rate
between the mobile and IWF.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.128.3.10.1.3 |
mscGsmBcLayer1IntermediateRateThis attribute indicates the intermediate rate used in the physical
layer rate adaptation process. This field is valid between the mobile
and the IWF. For user data rates of 300 bit/s - 4800 bit/s the
intermediate rate is 8 kbit/s. For user data rates 9600 bit/s and above
the intermediate rate is 16 kbit/s.ro Unsigned32 (8 | 16) .1.3.6.1.4.1.562.36.2.1.128.3.10.1.10 |
mscGsmBcLayer1StatsTableThis group contains physical layer statistics concerning the
operation of this particular GsmIwfBearerChannel. SEQUENCE OF MscGsmBcLayer1StatsEntry .1.3.6.1.4.1.562.36.2.1.128.3.11 |
mscGsmBcLayer1StatsEntryAn entry in the mscGsmBcLayer1StatsTable. MscGsmBcLayer1StatsEntry .1.3.6.1.4.1.562.36.2.1.128.3.11.1 |
mscGsmBcLayer1FramesTxThis attribute counts the number of frames transmitted on the link.
The counter wraps when it exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.128.3.11.1.1 |
mscGsmBcLayer1FramesRxThis attribute counts the number of frames received on the link.
Discarded frames are not included in this count. The counter wraps
when it exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.128.3.11.1.2 |
mscGsmBcLayer1BytesTxThis attribute counts number of bytes transmitted on the link. The
counter wraps when it exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.128.3.11.1.3 |
mscGsmBcLayer1BytesRxThis attribute counts the number of bytes received on the link. Bytes
from discarded frames are not included in this count. The counter
wraps when it exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.128.3.11.1.4 |
mscGsmBcLayer1UnderRunsTxThis attribute counts number of underruns, on a per-call basis, in the
transmit direction reported by the hardware on the mobile-side..
These frames are not counted towards the number of frames
transmitted (framesTx). The counter wraps when it exceeds the
maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.128.3.11.1.5 |
mscGsmBcLayer1OverRunsRxThis attribute counts number of overruns, on a per-call basis, in the
receive direction reported by the hardware on the mobile-side.
These frames are discarded. These frames are not counted towards
the number of frames received (framesRx). The counter wraps when
it exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.128.3.11.1.6 |
mscGsmBcLayer1NonOctetErrorsRxThis attribute counts the number of non-octet synchronous frame
errors, on a per-call basis, received on the link reported by the
hardware. This is when a frame whose bit content was not divisible
by eight was detected. These frames are discarded. These frames
are not counted towards the number of frames received (framesRx).
The counter wraps when it exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.128.3.11.1.7 |
mscGsmBcLayer1LargeFrameErrorsRxThis attribute counts the number of frames, on a per-call basis,
received on the link that exceeded internal buffer limits reported by
the hardware. A large number of these errors could indicate a bad
physical medium. These frames are discarded. These frames are not
counted towards the number of frames received (framesRx). The
counter wraps when it exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.128.3.11.1.8 |
mscGsmBcLayer1FramesDiscardedThis attribute counts the number of frames discarded, on a per-call
basis, in the receive direction by software due to frame errors. The
counter wraps when it exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.128.3.11.1.9 |
mscGsmBcLayer1LrcErrorsTxThis attribute counts the number of corrupted frames, on a per-call
basis, due to memory inconsistencies found by Longitude
Redundancy Check (LRC) checks at the IWF. These frames are not
counted towards the number of frames transmitted (framesTx). The
counter wraps when it exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.128.3.11.1.10 |
mscGsmBcModem OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.128.4 |
mscGsmBcModemRowStatusTableThis entry controls the addition and deletion of
mscGsmBcModem components. SEQUENCE OF MscGsmBcModemRowStatusEntry .1.3.6.1.4.1.562.36.2.1.128.4.1 |
mscGsmBcModemRowStatusEntryA single entry in the table represents a single
mscGsmBcModem component. MscGsmBcModemRowStatusEntry .1.3.6.1.4.1.562.36.2.1.128.4.1.1 |
mscGsmBcModemRowStatusThis variable is used as the basis for SNMP naming of
mscGsmBcModem components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.128.4.1.1.1 |
mscGsmBcModemComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.128.4.1.1.2 |
mscGsmBcModemStorageTypeThis variable represents the storage type value for the
mscGsmBcModem tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.128.4.1.1.4 |
mscGsmBcModemIndexThis variable represents the index for the mscGsmBcModem tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.128.4.1.1.10 |
mscGsmBcModemOperTableThis group contains operational attributes that measure performance
of the modem component for this particular GsmIwfBearerChannel. SEQUENCE OF MscGsmBcModemOperEntry .1.3.6.1.4.1.562.36.2.1.128.4.10 |
mscGsmBcModemOperEntryAn entry in the mscGsmBcModemOperTable. MscGsmBcModemOperEntry .1.3.6.1.4.1.562.36.2.1.128.4.10.1 |
mscGsmBcModemRateThis attribute indicates the transmission rate of the current modem
in use. A rate of 1200_75 is 75 bit/s in the transmit direction and
1200 bit/s in the receive direction. All other rates are the same in
both the transmit and receive directions.ro Enumeration .1.3.6.1.4.1.562.36.2.1.128.4.10.1.2 |
mscGsmBcModemAlgorithmInUseThis attribute indicates the current modem algorithm(s) active for
the channel. Valid values are:
v17, V.17 is active.V.17 is an ITU-T 14400bit/s modem standard.
v27ter, V.27ter is active. V.27ter is an ITU-T 7200bit/s modem
standard.
v29, V.29 is active. V.29 an ITU-T 9600bit/s modem standard.
v21, V.21 active. V.21 is an ITU-4 300bit/s modem standard.
v22bis, V.22 or V.22bis active. V.22 ia an ITU-T modem standard
that operates at 1200bit/s and 600 baud. V.22bis is an ITU-T
modem standard that operates at 2400bit/s and 600 baud.
v23, V.23 active. V.23 is an ITU-T modem standard that operates at
a speed of 1200bit/s.
v26ter, V.26ter active. V.26ter is an ITU-T modem standard that
operates at a speed of 2400bit/s.
v32bis, V.32 or V.32bis active. V.32 is an ITU-T modem standard
that operates at 9600bit/s and 2400 baud. V.32bis is an ITU-T
modem standard that operates at a speed of 14.4kbit/s.
v34, V.34 active. V.34 is an ITU-T modem standard that operates at
a speed of up to 28.8kbit/s.
Description of bits:
notused0(0)
v17(1)
v29(2)
v27ter(3)
v21(4)
v22bis(5)
v23(6)
v26ter(7)
v32bis(8)
v34(9)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.128.4.10.1.3 |
mscGsmBcModemProtocolStateThis attribute indicates the active protocol state of the modem in
use.Valid values are:
idle, Modem is in an inactive state and has no current connection
established.
training, Modem is attempting to establish a connection with the far
end modem via handshaking.
connected, Modem has establish a connection with the far end
modem.ro Enumeration .1.3.6.1.4.1.562.36.2.1.128.4.10.1.4 |
mscGsmBcModemReceiverTransmitterThis attribute indicates whether the fax data modem is in receive or
transmit mode. If this is not a fax data modem call, then the value is
set to notApplicable. Valid values are:
notApplicable, Not an applicable field.
rxOnTxOff, Receiver is on, transmitter is off.
rxOffTxOn, Receiver is off, transmitter is on.
rxTxOn, Reciever is on, transmitter is on.ro Enumeration .1.3.6.1.4.1.562.36.2.1.128.4.10.1.5 |
mscGsmBcModemTrainingThis attribute indicates the training procedure used by the V.17
modems. ITU-T defines two training procedures. A longer training
procedure used at call setup, and a short training procedure is used
during the fax call when switching from the V.21 modem to the
V.17 modem. A value of notApplicable indicates that the attribute is
not applicable for the modem.ro Enumeration .1.3.6.1.4.1.562.36.2.1.128.4.10.1.6 |
mscGsmBcModemToUpperFlowControlActiveThis attribute indicates whether flow control was requested and an
indication was sent to an upper layer protocol.ro Enumeration .1.3.6.1.4.1.562.36.2.1.128.4.10.1.8 |
mscGsmBcModemToDspFlowControlActiveThis attribute indicates whether an upper layer protocol requested
flow control and an indication was sent to the Digital Signal
Processor.ro Enumeration .1.3.6.1.4.1.562.36.2.1.128.4.10.1.9 |
mscGsmBcModemAsyncModeThis attribute indicates whether conversion between synchronous
and asynchronous data format (specifacally, the stripping or
insertion of start and stop bits) is being performed. The value will
be on unless the V.42 layer is active or it is a fax call.ro Enumeration .1.3.6.1.4.1.562.36.2.1.128.4.10.1.10 |
mscGsmBcModemAutoHdlcModeThis attribute indicates whether High-Level Data Link Control
(HDLC) functions are being performed by the modem to support
HDLC applications (V.42 for example).ro Enumeration .1.3.6.1.4.1.562.36.2.1.128.4.10.1.11 |
mscGsmBcModemOutbandFlowControlThis attribute indicates whether inband or outband flow control
conversions are being performed. The modem performs either
inband or outband flow control unless V.42 layer is active, it is a fax
call, or no flow control was specified by the MSC.ro Enumeration .1.3.6.1.4.1.562.36.2.1.128.4.10.1.12 |
mscGsmBcModemOutbandBreakThis attribute indicates whether inband or outband break control
conversions are being performed. This is when the modem detects a
break condition as defined by ITU-T X.28 and reports it. When a
break condition is discovered all subsequent incoming data is
discarded until a start bit is received.ro Enumeration .1.3.6.1.4.1.562.36.2.1.128.4.10.1.13 |
mscGsmBcModemAutobaudThis attribute indicates whether autobaud is active.
The modem is instructed at call setup time by the MSC on:
What is the initial modem data rate value and
Whether a modem is allowed to perform autobauding (on) or not
(off). With Autobauding on, the modem is allowed to connect using
a valid modem data rate less than or equal to the initial rate
specified to the modem by the MSC. If a modem can not perform
autobauding and the carrier can not be established at the initial data
rate, the modem is disabled.ro Enumeration .1.3.6.1.4.1.562.36.2.1.128.4.10.1.14 |
mscGsmBcModemStatsTableThis group contains operational attributes that measure performance
of the modem component for this particular GsmIwfBearerChannel. SEQUENCE OF MscGsmBcModemStatsEntry .1.3.6.1.4.1.562.36.2.1.128.4.11 |
mscGsmBcModemStatsEntryAn entry in the mscGsmBcModemStatsTable. MscGsmBcModemStatsEntry .1.3.6.1.4.1.562.36.2.1.128.4.11.1 |
mscGsmBcModemBytesTxThis attribute counts the number of payload bytes transmitted. The
counter wraps when it exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.128.4.11.1.1 |
mscGsmBcModemBytesRxThis attribute counts the number of payload bytes received. The
counter wraps when it exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.128.4.11.1.2 |
mscGsmBcModemFramingErrorsThis attribute counts the number of framing errors detected by the
hardware. This is the absence of a stop bit after a start bit and eight
bits of data. All incoming data is discarded until the next start bit is
received. The counter wraps when it exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.128.4.11.1.6 |
mscGsmBcV110 OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.128.5 |
mscGsmBcV110RowStatusTableThis entry controls the addition and deletion of
mscGsmBcV110 components. SEQUENCE OF MscGsmBcV110RowStatusEntry .1.3.6.1.4.1.562.36.2.1.128.5.1 |
mscGsmBcV110RowStatusEntryA single entry in the table represents a single
mscGsmBcV110 component. MscGsmBcV110RowStatusEntry .1.3.6.1.4.1.562.36.2.1.128.5.1.1 |
mscGsmBcV110RowStatusThis variable is used as the basis for SNMP naming of
mscGsmBcV110 components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.128.5.1.1.1 |
mscGsmBcV110ComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.128.5.1.1.2 |
mscGsmBcV110StorageTypeThis variable represents the storage type value for the
mscGsmBcV110 tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.128.5.1.1.4 |
mscGsmBcV110IndexThis variable represents the index for the mscGsmBcV110 tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.128.5.1.1.10 |
mscGsmBcV110OperTableThis group contains operational attributes that measure the
performance of V110. SEQUENCE OF MscGsmBcV110OperEntry .1.3.6.1.4.1.562.36.2.1.128.5.10 |
mscGsmBcV110OperEntryAn entry in the mscGsmBcV110OperTable. MscGsmBcV110OperEntry .1.3.6.1.4.1.562.36.2.1.128.5.10.1 |
mscGsmBcV110DataRateThis attribute contains the layer 1 user data rate for the currently
active call for this GsmIwfBearerChannel. This is the data rate
between the IWF and the fixed network.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.128.5.10.1.2 |
mscGsmBcV110IntermediateRateThis attribute indicates the intermediate rate used in the physical
layer rate adaptation process. This field is valid between the
network and the IWF. For user data rates of 300 bit/s to 4800 bit/s
the intermediate rate is 8 kbit/s. For a user data rate of 9600 bit/s the
intermediate rate is 16 kbit/s. For user data rates of 1200 bit/s to
19200 bit/s the intermediate rate is 32 kbit/s. Data rates above this
have no intermediate rate.ro Enumeration .1.3.6.1.4.1.562.36.2.1.128.5.10.1.9 |
mscGsmBcV110StatsTableThis group contains statistical attributes which measure the
performance of V110. SEQUENCE OF MscGsmBcV110StatsEntry .1.3.6.1.4.1.562.36.2.1.128.5.11 |
mscGsmBcV110StatsEntryAn entry in the mscGsmBcV110StatsTable. MscGsmBcV110StatsEntry .1.3.6.1.4.1.562.36.2.1.128.5.11.1 |
mscGsmBcV110FramesTxThis attribute counts the number of frames transmitted on the link.
The counter wraps when it exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.128.5.11.1.1 |
mscGsmBcV110FramesRxThis attribute counts the number of frames received on the link.
Discarded frames are not included in this count. The counter wraps
when it exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.128.5.11.1.2 |
mscGsmBcV110BytesTxThis attribute counts the number of bytes transmitted on the link.
The counter wraps when it exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.128.5.11.1.3 |
mscGsmBcV110BytesRxThis attribute counts the number of bytes received on the link. Bytes
from discarded frames are not included in this count. The counter
wraps when it exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.128.5.11.1.4 |
mscGsmBcV110UnderRunsTxThis attribute counts the number of underruns, on a per-call basis, in
the transmit direction reported by the hardware on the network side.
These frames are not counted towards the number of frames
transmitted (framesTx). The counter wraps when it exceeds the
maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.128.5.11.1.5 |
mscGsmBcV110OverRunsRxThis attribute counts the number of overruns, on a per-call basis, in
the receive direction reported by the hardware on the network side.
These frames are discarded. These frames are not counted towards
the number of frames received (framesRx). The counter wraps when
it exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.128.5.11.1.6 |
mscGsmBcV110NonOctetErrorsRxThis attribute counts the number of non-octet synchronous frame
errors, on a per-call basis, received on the link reported by the
hardware. These frames are discarded. These frames are not
counted towards the number of frames received (framesRx). The
counter wraps when it exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.128.5.11.1.7 |
mscGsmBcV110LargeFrameErrorsRxThis attribute counts the number of frames received on the link that
exceeded internal buffer limits reported by the hardware, on a per-
call basis. These frames are discarded. These frames are not
counted towards the number of frames received (framesRx). The
counter wraps when it exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.128.5.11.1.8 |
mscGsmBcV110FramesDiscardedThis attribute counts the number of frames discarded, on a per-call
basis, in the receive direction by software due to frame errors. The
counter wraps when it exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.128.5.11.1.9 |
mscGsmBcV110LrcErrorsTxThis attribute counts the number of corrupted frames, on a per-call
basis, due to memory inconsistencies found by Longitude
Redundancy Check (LRC) checks at the IWF. The counter wraps
when it exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.128.5.11.1.10 |
mscGsmBcFax OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.128.6 |
mscGsmBcFaxRowStatusTableThis entry controls the addition and deletion of
mscGsmBcFax components. SEQUENCE OF MscGsmBcFaxRowStatusEntry .1.3.6.1.4.1.562.36.2.1.128.6.1 |
mscGsmBcFaxRowStatusEntryA single entry in the table represents a single
mscGsmBcFax component. MscGsmBcFaxRowStatusEntry .1.3.6.1.4.1.562.36.2.1.128.6.1.1 |
mscGsmBcFaxRowStatusThis variable is used as the basis for SNMP naming of
mscGsmBcFax components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.128.6.1.1.1 |
mscGsmBcFaxComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.128.6.1.1.2 |
mscGsmBcFaxStorageTypeThis variable represents the storage type value for the
mscGsmBcFax tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.128.6.1.1.4 |
mscGsmBcFaxIndexThis variable represents the index for the mscGsmBcFax tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.128.6.1.1.10 |
mscGsmBcFaxOperTableThis group contains operational attributes which measure the
performance of the fax protocol. SEQUENCE OF MscGsmBcFaxOperEntry .1.3.6.1.4.1.562.36.2.1.128.6.10 |
mscGsmBcFaxOperEntryAn entry in the mscGsmBcFaxOperTable. MscGsmBcFaxOperEntry .1.3.6.1.4.1.562.36.2.1.128.6.10.1 |
mscGsmBcFaxActiveModeThis attribute indicates the mode of the fax T.30 protocol,
determined during Exchange Identification (XID) negotiations. The
following modes are supported:
normal, normal T.30 protocol, Error Correction Mode (ECM) not
used
ecm, Error Correction Mode used. Fax error correction is done
using a half-duplex page selective repeat technique.ro Enumeration .1.3.6.1.4.1.562.36.2.1.128.6.10.1.1 |
mscGsmBcFaxProtocolStateThis attribute indicates the protocol state of the fax adaptor. The
values are:
setup, call setup state
idle, idle state only transmitting Synchronize (SYNC) frames
bcsRx, receiving Binary Coded Signal (BCS) packet from modem
bcsTx, transmitting BCS packet to modem
msgRx, receiving fax message from modem
msgTx, transmitting fax message to modemro Enumeration .1.3.6.1.4.1.562.36.2.1.128.6.10.1.2 |
mscGsmBcFaxMessageRateThis attribute indicates the fax message rate used for sending fax
documents.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.128.6.10.1.3 |
mscGsmBcFaxStatsTableThis group contains statistical attributes which measure the
performance of the fax protocol. SEQUENCE OF MscGsmBcFaxStatsEntry .1.3.6.1.4.1.562.36.2.1.128.6.11 |
mscGsmBcFaxStatsEntryAn entry in the mscGsmBcFaxStatsTable. MscGsmBcFaxStatsEntry .1.3.6.1.4.1.562.36.2.1.128.6.11.1 |
mscGsmBcFaxMessageFramesRxThis attribute counts the number of fax message frames received
from the mobile. One fax message frame is an eight byte DATA
frame defined in GSM 3.45. The counter wraps when it exceeds the
maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.128.6.11.1.1 |
mscGsmBcFaxMessageFramesTxThis attribute counts the number of fax message frames transmitted
to the mobile. One fax message frame is an eight byte DATA frame
defined in GSM 3.45. The counter wraps when it exceeds the
maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.128.6.11.1.2 |
mscGsmBcFaxBcsFramesRxThis attribute counts the number of fax Binary Coded Signal (BCS)
frames received from the mobile. A fax BCS frame is an 8-byte
STATUS frame, which carries T.30 BCS data as defined in GSM
3.45. The counter wraps when it exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.128.6.11.1.3 |
mscGsmBcFaxBcsFramesTxThis attribute counts the number of fax Binary Coded Signal (BCS)
frames transmitted to the mobile. A fax BCS frame is an 8-byte
STATUS frame, which carries T.30 BCS data as defined in GSM
3.45. The counter wraps when it exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.128.6.11.1.4 |
mscGsmBcFaxPagesRxFromMobileThis attribute counts the number of fax pages received from the
mobile. The counter wraps when it exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.128.6.11.1.5 |
mscGsmBcFaxPagesTxToMobileThe attribute counts the number of fax pages transmitted to the
mobile. The counter wraps when it exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.128.6.11.1.6 |
mscGsmBcFaxChannelModeModifyThis attribute counts the number of Channel Mode Modify (CMM)
requests initiated by the IWF.
For transparent fax calls, the transmission speed is determined by
the two fax machines at call setup. The speed may change during
the transmission to satisfy the T.30 protocol. The CMM request is
used by the GSM IWF to request that the T.30 requested speed
change can be propagated throughout the network. The counter
wraps when it exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.128.6.11.1.7 |
mscGsmBcFaxBcsFrameErrorsThis attribute counts the number of fax Binary Coded Signal (BCS)
frames in error. This attribute indicates the count of corrupted fax
BCS frames over the GSM radio channel. The counter wraps when
it exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.128.6.11.1.8 |
mscGsmBcRlp OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.128.7 |
mscGsmBcRlpRowStatusTableThis entry controls the addition and deletion of
mscGsmBcRlp components. SEQUENCE OF MscGsmBcRlpRowStatusEntry .1.3.6.1.4.1.562.36.2.1.128.7.1 |
mscGsmBcRlpRowStatusEntryA single entry in the table represents a single
mscGsmBcRlp component. MscGsmBcRlpRowStatusEntry .1.3.6.1.4.1.562.36.2.1.128.7.1.1 |
mscGsmBcRlpRowStatusThis variable is used as the basis for SNMP naming of
mscGsmBcRlp components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.128.7.1.1.1 |
mscGsmBcRlpComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.128.7.1.1.2 |
mscGsmBcRlpStorageTypeThis variable represents the storage type value for the
mscGsmBcRlp tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.128.7.1.1.4 |
mscGsmBcRlpIndexThis variable represents the index for the mscGsmBcRlp tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.128.7.1.1.10 |
mscGsmBcRlpOperTableThis group contains operational attributes that measure performance
of the GsmIwfBearerChannel. SEQUENCE OF MscGsmBcRlpOperEntry .1.3.6.1.4.1.562.36.2.1.128.7.10 |
mscGsmBcRlpOperEntryAn entry in the mscGsmBcRlpOperTable. MscGsmBcRlpOperEntry .1.3.6.1.4.1.562.36.2.1.128.7.10.1 |
mscGsmBcRlpProtocolStateThis attribute indicates the last Radio Link Protocol (RLP) state
before call take down. The following are the states:
detached, Initial State. The call has not even started.
disconnected, Asynchronous Disconnected Mode (ADM).
connPending, In ADM, but sent Set Asynchronous Balanced Mode
(SABM) and waiting for a response.
discPending, Sent Disconnect (DISC), waiting for a response.
connectEstablished, In Asynchronous Balanced Mode (ABM),
Information frames can be exchanged.
synchronized, Synchronization state entered after a change of
channel coding. Handles REMAP procedure.ro Enumeration .1.3.6.1.4.1.562.36.2.1.128.7.10.1.1 |
mscGsmBcRlpFrameSizeThis attribute indicates the current Radio Link Protocol (RLP)
frame size transmitted. The size of the frame depends on the radio
channel type. The frames can be 240 bits long for 12 kbit/s and 6
kbit/s or 576 bits long for 14.5 kbit/s.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.128.7.10.1.2 |
mscGsmBcRlpHighestVersionThis attribute indicates the current highest version of the Radio Link
Protocol (RLP) protocol negotiated by the Radio Link Protocol
(RLP), during Exchange Information (XID). Valid values are:
0, Single-link basic version.
1, Single-link extended version (for example, extended by data
compression).
The value used for XID negotiations can be provisioned by
component GsmIwfRadioLinkProtocol attribute highestVersion.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.128.7.10.1.3 |
mscGsmBcRlpIwfToMsWindowSizeThis attribute indicates the current IWF to mobile window size
negotiated by the Radio Link Protocol (RLP) during Exchange
Information (XID). The window size is the maximum number of
sequentially numbered Information (I) frames that may be
unacknowledged at any given time. GSM specification 4.22 defines
the range as 0 to 61. The value used for XID negotiations can be
provisioned by component GsmIwfRadioLinkProtocol attribute
iwftoMsWindowSize.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.128.7.10.1.4 |
mscGsmBcRlpMsToIwfWindowSizeThis attribute indicates the current mobile to IWF window size
negotiated by the Radio Link Protocol (RLP), during Exchange
Information (XID). The window size is the maximum number of
sequentially numbered Information (I) frames that may be
unacknowledged at any given time. GSM specification 4.22 defines
the range as 0 to 61. The value used for XID negotiations can be
provisioned by component GsmIwfRadioLinkProtocol attribute
msToIwfWindowSize.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.128.7.10.1.5 |
mscGsmBcRlpT1AckTimerThis attribute indicates the current T1 timer negotiated by the Radio
Link Protocol (RLP), during Exchange Information (XID). This is
the period in milliseconds within which an acknowledgment of a
sent frame must be received. Once this timer expires, the
transmitting RLP entity shall assume that the frame was lost. The
value used for XID negotiations can be provisioned by component
GsmIwfRadioLinkProtocol attribute t1AckTimer.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.128.7.10.1.6 |
mscGsmBcRlpT2AckDelayTimerThis attribute indicates the current T2 timer negotiated by the Radio
Link Protocol (RLP), during Exchange Information (XID). This is
the maximum period in milliseconds the receiving RLP entity shall
wait before sending an acknowledgment for a received in sequenced
frame. The value used for XID negotiations can be provisioned by
component GsmIwfRadioLinkProtocol attribute t2AckDelayTimer.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.128.7.10.1.7 |
mscGsmBcRlpN2RetransmitCountThis attribute indicates the current value of N2 negotiated by the
Radio Link Protocol (RLP), during Exchange Information (XID).
This is the maximum number of times a RLP entity shall retransmit
an individual frame following the expiry of timer T1. The value
used for XID negotiations can be provisioned by component
GsmIwfRadioLinkProtocol attribute n2RetransmitCount.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.128.7.10.1.8 |
mscGsmBcRlpStatsTableThis group contains operational attributes that measure performance
of the GsmIwfBearerChannel. SEQUENCE OF MscGsmBcRlpStatsEntry .1.3.6.1.4.1.562.36.2.1.128.7.11 |
mscGsmBcRlpStatsEntryAn entry in the mscGsmBcRlpStatsTable. MscGsmBcRlpStatsEntry .1.3.6.1.4.1.562.36.2.1.128.7.11.1 |
mscGsmBcRlpIFramesTxThis attribute counts the number of valid Information frames
transmitted. This count does not include the Information frames
discarded. The counter wraps when it exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.128.7.11.1.1 |
mscGsmBcRlpIFramesRxThis attributes counts the number of valid Information (I) frames
received. The counter wraps when it exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.128.7.11.1.2 |
mscGsmBcRlpFramesRetransmittedThis attribute counts the total number of frames retransmitted.
Frames that are not acknowledged within the T1 timer are
retransmitted. The counter wraps when it exceeds the maximum
value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.128.7.11.1.3 |
mscGsmBcRlpT1AckTimeoutsThis attribute counts the total number of T1 timer time-outs.
Retransmission of all unacknowledged frames is started after T1
timer expiry. The counter wraps when it exceeds the maximum
value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.128.7.11.1.4 |
mscGsmBcRlpInvalidFramesThis attribute counts the number of invalid frames received. These
invalid frames are frames received from the mobile which contain
errors in the header information. This count does not include the
number of frames with Cyclic Redundancy Check (CRC) errors or
out-of-sequence Frame Errors. The counter wraps when it exceeds
the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.128.7.11.1.5 |
mscGsmBcRlpCrcErrorsRxThis attribute counts the number of frames with Cyclic Redundancy
Check (CRC) errors received by the IWF Radio Link Protocol
(RLP) entity. CRC is a type of block check character that is very
effective in detecting communications errors. CRCs are commonly
16 or 32 bits long (though, in GSM non-transparent services, a 24-
bit CRC is used). The counter wraps when it exceeds the maximum
value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.128.7.11.1.6 |
mscGsmBcRlpOutOfSequenceFramesThis attribute counts the number of out-of-sequence Information
frames received by the IWF Radio Link Protocol (RLP) entity. The
counter wraps when it exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.128.7.11.1.7 |
mscGsmBcRlpRemoteBusyIndicationsThis attribute counts the number of times the mobile Radio Link
Protocol (RLP) entity is busy (that is, it is in Asynchronous
Balanced Mode (ABM) and is not ready to receive Information
frames). The RLP entity is considered to be not ready to receive
information frames if the mobile sends a flow control indication
RNR (Receive Not Ready). A Receive Ready is sent to the RLP
entity when the mobile is ready to receive data. The counter wraps
when it exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.128.7.11.1.8 |
mscGsmBcRlpLocalBusyIndicationsThis attribute counts the number of times the IWF RLP entity is
busy (that is it is in Asynchronous Balanced Mode (ABM) and is
not ready to receive Information frames). When the network side
introduces flow control towards the mobile and a Receive Not
Ready (RNR) is sent to the mobile to stop the mobile from sending
any more data frames. A Receive Ready (RR) is sent to the mobile
when the RLP entity is ready to receive data. The counter wraps
when it exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.128.7.11.1.9 |
mscGsmBcRlpIFramesTxDiscardedThis attribute counts the number of frames discarded by the IWF.
Untransmitted and unacknowledged frames are discarded when a
Set Asynchronous Balanced Mode (SABM) or Disconnect (DISC)
is received or sent in Asynchronous Balanced Mode (ABM) mode.
The counter wraps when it exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.128.7.11.1.10 |
mscGsmBcRlpResetsRxThis attribute counts the number of resets sent by the mobile. Loss
of information may occur when a reset is issued. A reset is issued
by the mobile on failure of checkpoint recovery. That is if the
mobile does not receive acknowledgment for its information frame,
it does checkpoint recovery (it sends a supervisory frame requesting
the status of the other entity. If the responding entity fails to respond
to N2 of this checkpoint frame a reset is initiated by the originating
entity. A reset can also be issued by the mobile during handover
where a loss of connection or synchronization occurs. The counter
wraps when it exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.128.7.11.1.11 |
mscGsmBcV42 OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.128.8 |
mscGsmBcV42RowStatusTableThis entry controls the addition and deletion of
mscGsmBcV42 components. SEQUENCE OF MscGsmBcV42RowStatusEntry .1.3.6.1.4.1.562.36.2.1.128.8.1 |
mscGsmBcV42RowStatusEntryA single entry in the table represents a single
mscGsmBcV42 component. MscGsmBcV42RowStatusEntry .1.3.6.1.4.1.562.36.2.1.128.8.1.1 |
mscGsmBcV42RowStatusThis variable is used as the basis for SNMP naming of
mscGsmBcV42 components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.128.8.1.1.1 |
mscGsmBcV42ComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.128.8.1.1.2 |
mscGsmBcV42StorageTypeThis variable represents the storage type value for the
mscGsmBcV42 tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.128.8.1.1.4 |
mscGsmBcV42IndexThis variable represents the index for the mscGsmBcV42 tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.128.8.1.1.10 |
mscGsmBcV42OperTableThis group contains operational attributes which measure V.42 error
detection and correction performance. SEQUENCE OF MscGsmBcV42OperEntry .1.3.6.1.4.1.562.36.2.1.128.8.10 |
mscGsmBcV42OperEntryAn entry in the mscGsmBcV42OperTable. MscGsmBcV42OperEntry .1.3.6.1.4.1.562.36.2.1.128.8.10.1 |
mscGsmBcV42ProtocolStateThis attribute indicates the state of V.42. Valid states are:
notActive, The V.42 link connection with the Public Switched
Telephoned Network) PSTN modem is not established. None of the
V.42 functions including the error detection, error correction, and
flow control is provided to the data call. This is the initial state of
V.42.
disconnected, This means that the V42 link is disconnected.
linksetup, The V.42 operation enters this state from the
disconnected state after the V.42 sends to the PSTN modem a Set
Asynchronous Balanced Mode Extended (SABME) frame in an
attempt to establish the error control connection with the PSTN
modem.
frameReject, The V.42 operation enters into this state after it
identifies an invalid frame sent by the peer and it sends back a frame
reject (FRMR) frame to the peer.
disconnectRequest, The V.42 operation enters into this state after it
sends to the peer a disconnect (DISC) frame with the attempt to
disconnect the V.42 error control link.
informationTransfer, The V.42 enters into this state after it receives
a UA (unnumbered acknowledgment) frame which the peer sent
upon receipt of the SAMBE frame from IWF V.42. Once in this
state, the V.42 can exchange data and supervisory information with
its peer.
waitingAck, The V.42 enters this state after it sends polling enquiry
to its peer. The V.42 sends the polling enquiry when it receives a
reject frame (REJ) from its peer or either its acknowledgment timer
or inactivity timer timed out on the information frames sent out.ro Enumeration .1.3.6.1.4.1.562.36.2.1.128.8.10.1.1 |
mscGsmBcV42TxN401FrameSizeThis attribute indicates the current value of parameter N401 for
V.42 which is negotiated during Exchange Information (XID). This
is the maximum number of octets that can be carried in the
information field of an information frame that the IWF V.42
transmits to the Public Switched Telephone Network (PSTN)
modem. The IWF V.42 puts this or even smaller size of data into the
outgoing information frame. The value used for XID negotiations
can be provisioned by component GsmIwfV42 attribute
txN401FrameSize.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.128.8.10.1.2 |
mscGsmBcV42RxN401FrameSizeThis attribute indicates the current value of N401, that is negotiated
during Exchange Identification (XID). This is the maximum number
of octets that can be carried in the information field of an
information frame received from the Public Switched Telephone
Network (PSTN) modem. An incoming information frame carrying
data octets more than this size shall be rejected by the IWF V.42.
The value used for XID negotiations can be provisioned by
component GsmIwfV42 attribute rxN401FrameSize.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.128.8.10.1.3 |
mscGsmBcV42TxKwindowSizeThis attribute indicates the current value of k, that is negotiated
during Exchange Identification (XID). This is the size of flow
control sliding window used for the information frames that the
V.42 transmits to the Public Switched Telephone Network (PSTN)
modem. This size governs the maximum number of information
frames that the IWF V.42 error-correcting entity can have
outstanding (that is, unacknowledged). The value used for XID
negotiations can be provisioned by component GsmIwfV42 attribute
txKwindowSize.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.128.8.10.1.4 |
mscGsmBcV42RxKwindowSizeThis attribute indicates the current value of k that is negotiated
during Exchange Identification (XID). This is the size of flow
control sliding window used for information frames transmitted
from the Public Switched Telephone Network (PSTN) modem. This
size governs the maximum number of information frames that the
peer of the IWF V.42 error-correcting entity can have outstanding
(that is, unacknowledged). The value used for XID negotiations can
be provisioned by component GsmIwfV42 attribute rxKwindowSize.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.128.8.10.1.5 |
mscGsmBcV42StatsTableThis group contains statistical attributes that measure the V.42 error
detection and correction performance. SEQUENCE OF MscGsmBcV42StatsEntry .1.3.6.1.4.1.562.36.2.1.128.8.11 |
mscGsmBcV42StatsEntryAn entry in the mscGsmBcV42StatsTable. MscGsmBcV42StatsEntry .1.3.6.1.4.1.562.36.2.1.128.8.11.1 |
mscGsmBcV42IBytesRxThis attribute counts the total number of bytes that the V.42 actually
received from the Public Switched Telephone Network (PSTN)
modem in a data call. The counter wraps when it exceeds the
maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.128.8.11.1.1 |
mscGsmBcV42IBytesTxThis attribute counts the total number of bytes that the V.42
transmitted to the Public Switched Telephone Network (PSTN)
modem in a data call. The counter wraps when it exceeds the
maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.128.8.11.1.2 |
mscGsmBcV42IFramesRxThis attribute counts the total number of Information (I) frames that
the V.42 received from the Public Switched Telephone Network
(PSTN) modem in a data call. The counter wraps when it exceeds
the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.128.8.11.1.3 |
mscGsmBcV42IFramesTxThis attribute counts the total number of information frames that the
V.42 transmitted to the Public Switched Telephone Network
(PSTN) modem in a data call. The counter wraps when it exceeds
the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.128.8.11.1.4 |
mscGsmBcV42FramesRetransmittedThis attribute counts the total number of frames retransmitted by the
IWF V.42 entity in a data call. The V.42 retransmits the same frame
when the associated T401 acknowledgment timer time-outs or when
a Reject (REJ) supervisory frame has been received from the Public
Switched Telephone Network (PSTN) modem. The counter wraps
when it exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.128.8.11.1.5 |
mscGsmBcV42T1AckTimeoutsThis attribute counts the total number of times that the T401 timer
has timed out within a data call. If this timer times-out frequently,
the operator may need to adjust the provisional parameter T401
acknowledgment timer to a larger time amount, since every time
that V.42 sends out a frame it sets the T401 timer to wait for the
peer's acknowledgment of the frame. When the timer times-out and
no acknowledgment has been received, the V.42 sends the same
frame to its peer. The counter wraps when it exceeds the maximum
value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.128.8.11.1.6 |
mscGsmBcV42RemoteBusyIndicationsThis attribute counts the total number of times the Public Switched
Telephone Network (PSTN) modem enters a busy state (the IWF
has received a Receive Not Ready message) and asks the IWF V.42
not to send Information (I) frames to it until it is ready to receive
information frames again (indicated by receipt of a Receive Ready
message or a data message). The counter wraps when it exceeds the
maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.128.8.11.1.7 |
mscGsmBcV42LocalBusyIndicationsThis attribute counts the total number of times the IWF V.42 enters
in a busy condition and asks the peer to stop sending information
frames until it has cleared up from the busy condition. The V.42
enters busy condition when its data buffer is about to be overflowed
by the incoming Information (I) frames. The counter wraps when it
exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.128.8.11.1.8 |
mscGsmBcV42BadFramesRxThis attribute counts the total number of bad frames the IWF V.42
has received from the Public Switched Telephone Network (PSTN)
remote modem within the data call. In this instance, 'bad frames'
refer to the V.42 protocol error frames other than the check
sequence error frames. The counter wraps when it exceeds the
maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.128.8.11.1.9 |
mscGsmBcV42CrcErrorsRxThis attribute counts the total number of frames received from the
remote Public Switched Telephone Network (PSTN) modem that
contain incorrect frame check sequence. A high value signifies the
condition of the physical medium is poor. The counter wraps when
it exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.128.8.11.1.10 |
mscGsmBcV42bis OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.128.9 |
mscGsmBcV42bisRowStatusTableThis entry controls the addition and deletion of
mscGsmBcV42bis components. SEQUENCE OF MscGsmBcV42bisRowStatusEntry .1.3.6.1.4.1.562.36.2.1.128.9.1 |
mscGsmBcV42bisRowStatusEntryA single entry in the table represents a single
mscGsmBcV42bis component. MscGsmBcV42bisRowStatusEntry .1.3.6.1.4.1.562.36.2.1.128.9.1.1 |
mscGsmBcV42bisRowStatusThis variable is used as the basis for SNMP naming of
mscGsmBcV42bis components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.128.9.1.1.1 |
mscGsmBcV42bisComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.128.9.1.1.2 |
mscGsmBcV42bisStorageTypeThis variable represents the storage type value for the
mscGsmBcV42bis tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.128.9.1.1.4 |
mscGsmBcV42bisIndexThis variable represents the index for the mscGsmBcV42bis tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.128.9.1.1.10 |
mscGsmBcV42bisOperTableThis group contains operational attributes that measure the
performance of V.42bis. SEQUENCE OF MscGsmBcV42bisOperEntry .1.3.6.1.4.1.562.36.2.1.128.9.10 |
mscGsmBcV42bisOperEntryAn entry in the mscGsmBcV42bisOperTable. MscGsmBcV42bisOperEntry .1.3.6.1.4.1.562.36.2.1.128.9.10.1 |
mscGsmBcV42bisProtocolModeEncoderThis attribute indicates the current mode of the V.42bis encoder.
This mode can be either:
transparent - A mode of operation in which compression has been
selected but data is being transmitted in uncompressed form.
Transparent mode command sequences may be inserted into the
data stream.
compressed - A mode of operation in which data is transmitted in
codewords.
The encoder switches between the two modes depending on
whether the data coming from the Date Terminal Equipment (DTE)
is suitable for compression. The data comression function
periodically determines the compressibility of the data based on a
comparison of the number of bits required to represent a segment of
the data stream before and after compression.ro Enumeration .1.3.6.1.4.1.562.36.2.1.128.9.10.1.1 |
mscGsmBcV42bisProtocolModeDecoderThis attribute indicates the current mode of the V.42bis decoder.
This mode can be either:
transparent - A mode of operation in which compression has been
selected but data is being transmitted in uncompressed form.
Transparent mode command sequences may be inserted into the
data stream.
compressed - A mode of operation in which data is transmitted in
codewords.
The encoder (at the mobile or Public Switched Telephone Network)
switches between the two modes depending on whether the data
coming from the Date Terminal Equipment (DTE) is suitable for
compression. The data comression function periodically determines
the compressibility of the data based on a comparison of the number
of bits required to represent a segment of the data stream before and
after compression.ro Enumeration .1.3.6.1.4.1.562.36.2.1.128.9.10.1.2 |
mscGsmBcV42bisCompressionDirectionThis attribute indicates the direction in which V.42bis is active,
negotiated at link setup by the data link protocol through Exchange
Identification (XID) negotiation of parameter P0 (compression
direction). The value used for XID negotiations can be provisioned
by component GsmIwfV42bisProv attribute compressionDirection.
Valid values are:
none, No compression is present.
encode, The data sent by the IWF to the other entity is compressed.
decode, The data received by the IWF from the other entity is
compressed.
both, The data sent and received by the IWF is compressed.ro Enumeration .1.3.6.1.4.1.562.36.2.1.128.9.10.1.3 |
mscGsmBcV42bisMaximumCodewordsThis attribute indicates the maximum number of codewords in the
dictionary negotiated at link setup by the data link protocol by way
of the Exchange Identification (XID) negotiation of parameter P1
(number of codewords). The value used for XID negotiations can be
provisioned by component GsmIwfV42bisProv attribute
maximumCodewords.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.128.9.10.1.4 |
mscGsmBcV42bisMaximumStringSizeThis attribute indicates the maximum number of characters allowed
in a string represented by a codeword negotiated at link setup by the
data link protocol by way of the Exchange Identification (XID)
negotiation of parameter P2 (maximum string size). The value used
for XID negotiations can be provisioned by component
GsmIwfV42bisProv attribute maximumStringSize.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.128.9.10.1.5 |
mscGsmBcV42bisLastDecodeErrorThis attribute indicates last error found by the decoder. Error values
are:
none, No errors found.
badStepup, Receipt of STEPUP (step up codeword size) codeword
when it would cause C2 (current code word size) to exceed N1
(maximum code word size).
codewordEqC1, Receipt of a codeword, at any time, equal to C1
(next empty dictionary entry).
emptyCodeword, Receipt of a codeword representing an empty
dictionary entry.
reservedCommand, Receipt of a reserved command code.
generalError, Receipt of any other error.
The action taken by V.42bis on detecting an error is provisioned by
component GsmIwfV42bis attribute actionOnError.ro Enumeration .1.3.6.1.4.1.562.36.2.1.128.9.10.1.6 |
mscGsmBcV42bisCompRatioEncoderThis attribute indicates the number of uncompressed bytes divided
by the number of compressed bytes. A value greater than one means
that the data is being compressed. This is the compression ratio
achieved by the V.42bis encoder running on the Passport. This
attribute is relevant for both protocol modes transparent and
compressed as the encoder switches between the two modes.ro FixedPoint2 .1.3.6.1.4.1.562.36.2.1.128.9.10.1.7 |
mscGsmBcV42bisCompRatioDecoderThis attribute indicates the number of uncompressed bytes divided
by the number of compressed bytes. A value greater than one means
that the data is being compressed. This is the compression ratio
achieved by the V.42bis encoder at the mobile or Public Switched
Telephone Network (PSTN). This attribute is relevant for both
protocol modes transparent and compressed as the encoder switches
between the two modes.ro FixedPoint2 .1.3.6.1.4.1.562.36.2.1.128.9.10.1.8 |
mscGsmBcV42bisStatsTableThis group contains operational attributes that measure the
performance of V.42bis. SEQUENCE OF MscGsmBcV42bisStatsEntry .1.3.6.1.4.1.562.36.2.1.128.9.11 |
mscGsmBcV42bisStatsEntryAn entry in the mscGsmBcV42bisStatsTable. MscGsmBcV42bisStatsEntry .1.3.6.1.4.1.562.36.2.1.128.9.11.1 |
mscGsmBcV42bisModeChangesEncodeThis attribute counts the number of mode changes (from transparent
to compressed or from compressed to transparent) by the encoder.
The counter wraps when it exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.128.9.11.1.1 |
mscGsmBcV42bisModeChangesDecodeThis attribute counts the number of mode changes (from transparent
to compressed or from compressed to transparent) by the decoder.
The mode changes are determined by the encoder at the mobile or
the Public Switched Telephone Network (PSTN). The counter
wraps when it exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.128.9.11.1.2 |
mscGsmBcV42bisResetsEncodeThis attribute counts the number of resets sent by the encoder. A
reset is a command code sent by the encoder to force dictionary
reinitialization. The counter wraps when it exceeds the maximum
value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.128.9.11.1.3 |
mscGsmBcV42bisResetsDecodeThis attribute counts the number of resets received by the decoder.
A reset is a command code sent by the encoder to force dictionary
reinitialization. The resets of the decoder are determined by the
encoder at the mobile or Public Switched Telephone Network
(PSTN). The counter wraps when it exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.128.9.11.1.4 |
mscGsmBcV42bisReInitializationsThis attribute counts the number of times V.42bis is reinitialized
because of a destructive break (a destructive break is a break that
causes data to be discarded) occurring on the error-corrected
connection initiatated by either the mobile or Public Switched
Telephone Network (PSTN). The counter wraps when it exceeds the
maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.128.9.11.1.5 |
mscGsmBcV42bisErrorsInDecodeThis attribute counts the number of errors found by the decoder.
The errors could be any of the following:
1.Receipt of STEPUP (step up codeword size) codeword when it
would cause C2 (current code word size) to exceed N1 (maximum
code word size).
2. Receipt of a codeword, at any time, equal to C1 (next empty
dictionary entry).
3. Receipt of a codeword representing an empty dictionary entry.
4. Receipt of a reserved command code.
5. Receipt of any other error.
The counter wraps when it exceeds the maximum value.
The action taken by V.42bis on detecting any of these errors is
provisioned by component GsmIwfV42bis attribute actionOnError.ro Counter32 .1.3.6.1.4.1.562.36.2.1.128.9.11.1.6 |
mscGsmBcL2RCop OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.128.10 |
mscGsmBcL2RCopRowStatusTableThis entry controls the addition and deletion of
mscGsmBcL2RCop components. SEQUENCE OF MscGsmBcL2RCopRowStatusEntry .1.3.6.1.4.1.562.36.2.1.128.10.1 |
mscGsmBcL2RCopRowStatusEntryA single entry in the table represents a single
mscGsmBcL2RCop component. MscGsmBcL2RCopRowStatusEntry .1.3.6.1.4.1.562.36.2.1.128.10.1.1 |
mscGsmBcL2RCopRowStatusThis variable is used as the basis for SNMP naming of
mscGsmBcL2RCop components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.128.10.1.1.1 |
mscGsmBcL2RCopComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.128.10.1.1.2 |
mscGsmBcL2RCopStorageTypeThis variable represents the storage type value for the
mscGsmBcL2RCop tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.128.10.1.1.4 |
mscGsmBcL2RCopIndexThis variable represents the index for the mscGsmBcL2RCop tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.128.10.1.1.10 |
mscGsmBcL2RCopOperTableThis group contains operational attributes that measure the
performance of L2RCop. SEQUENCE OF MscGsmBcL2RCopOperEntry .1.3.6.1.4.1.562.36.2.1.128.10.10 |
mscGsmBcL2RCopOperEntryAn entry in the mscGsmBcL2RCopOperTable. MscGsmBcL2RCopOperEntry .1.3.6.1.4.1.562.36.2.1.128.10.10.1 |
mscGsmBcL2RCopFlowControlStateTxThis attribute indicates whether flow control is active in the transmit
direction (towards the network side) for Layer2 Relay.ro Enumeration .1.3.6.1.4.1.562.36.2.1.128.10.10.1.1 |
mscGsmBcL2RCopFlowControlStateRxThis attribute indicates whether flow control is active in the receive
direction (towards the mobile) for Layer2 Relay.ro Enumeration .1.3.6.1.4.1.562.36.2.1.128.10.10.1.2 |
mscGsmBcL2RCopStatsTableThis group contains operational attributes that measure the
performance of L2RCop. SEQUENCE OF MscGsmBcL2RCopStatsEntry .1.3.6.1.4.1.562.36.2.1.128.10.11 |
mscGsmBcL2RCopStatsEntryAn entry in the mscGsmBcL2RCopStatsTable. MscGsmBcL2RCopStatsEntry .1.3.6.1.4.1.562.36.2.1.128.10.11.1 |
mscGsmBcL2RCopBytesTxThis attribute counts the number of data bytes relayed by Layer2
Relay in the transmit direction (towards the network). The counter
wraps when it exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.128.10.11.1.1 |
mscGsmBcL2RCopBytesRxThis attribute counts the number of data bytes relayed by Layer2
Relay in the receive direction (towards the mobile). The counter
wraps when it exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.128.10.11.1.2 |
mscGsmBcL2RCopBreakCountRxThis attribute counts the number of breaks received from the
mobile. A break received from the mobile results in the V.42bis
function being reset and the break condition forwarded to the
network. The counter wraps when it exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.128.10.11.1.3 |
mscGsmBcL2RCopBreakCountTxThis attribute counts the number of breaks transmitted to the mobile
(a break was received from the network). A break received from the
network results in the V.42bis function being reset and the break
condition forwarded to the mobile. The counter wraps when it
exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.128.10.11.1.4 |
mscGsmBcUpperRelay OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.128.11 |
mscGsmBcUpperRelayRowStatusTableThis entry controls the addition and deletion of
mscGsmBcUpperRelay components. SEQUENCE OF MscGsmBcUpperRelayRowStatusEntry .1.3.6.1.4.1.562.36.2.1.128.11.1 |
mscGsmBcUpperRelayRowStatusEntryA single entry in the table represents a single
mscGsmBcUpperRelay component. MscGsmBcUpperRelayRowStatusEntry .1.3.6.1.4.1.562.36.2.1.128.11.1.1 |
mscGsmBcUpperRelayRowStatusThis variable is used as the basis for SNMP naming of
mscGsmBcUpperRelay components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.128.11.1.1.1 |
mscGsmBcUpperRelayComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.128.11.1.1.2 |
mscGsmBcUpperRelayStorageTypeThis variable represents the storage type value for the
mscGsmBcUpperRelay tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.128.11.1.1.4 |
mscGsmBcUpperRelayIndexThis variable represents the index for the mscGsmBcUpperRelay tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.128.11.1.1.10 |
mscGsmBcUpperRelayOperTableThis group contains operational attributes that measure the
performance of the UpperRelay. SEQUENCE OF MscGsmBcUpperRelayOperEntry .1.3.6.1.4.1.562.36.2.1.128.11.10 |
mscGsmBcUpperRelayOperEntryAn entry in the mscGsmBcUpperRelayOperTable. MscGsmBcUpperRelayOperEntry .1.3.6.1.4.1.562.36.2.1.128.11.10.1 |
mscGsmBcUpperRelayBufferSizeThis attribute indicates the size of the transmit and receive flow
control buffers.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.128.11.10.1.1 |
mscGsmBcUpperRelayFlowControlStateTxThis attribute indicates whether the transmit flow control is active or
not.ro Enumeration .1.3.6.1.4.1.562.36.2.1.128.11.10.1.2 |
mscGsmBcUpperRelayFlowControlStateRxThis attribute indicates whether the receive flow control is active or
not.ro Enumeration .1.3.6.1.4.1.562.36.2.1.128.11.10.1.3 |
mscGsmBcUpperRelayStatsTableThis group contains operational attributes that measure the
performance of the UpperRelay. SEQUENCE OF MscGsmBcUpperRelayStatsEntry .1.3.6.1.4.1.562.36.2.1.128.11.11 |
mscGsmBcUpperRelayStatsEntryAn entry in the mscGsmBcUpperRelayStatsTable. MscGsmBcUpperRelayStatsEntry .1.3.6.1.4.1.562.36.2.1.128.11.11.1 |
mscGsmBcUpperRelayFramesTxThis attribute counts the number of frames that are sent in the
transmit direction. The counter wraps when it exceeds the
maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.128.11.11.1.1 |
mscGsmBcUpperRelayFramesRxThis attribute counts the number of frames that are sent in the
receive direction. The counter wraps when it exceeds the maximum
value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.128.11.11.1.2 |
mscGsmBcUpperRelayUnacknowledgedFramesThis attribute indicates the number of current frames sent that have
not been acknowledged.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.128.11.11.1.3 |
mscGsmBcOperTableThis group contains operational attributes concerning the operation
of this particular GsmIwfBearerChannel for the current or most
recent call. SEQUENCE OF MscGsmBcOperEntry .1.3.6.1.4.1.562.36.2.1.128.101 |
mscGsmBcOperEntryAn entry in the mscGsmBcOperTable. MscGsmBcOperEntry .1.3.6.1.4.1.562.36.2.1.128.101.1 |
mscGsmBcMipStateThis attribute indicates the current state of the MSC/IWF Interface
Protocol (MIP) for an IWF element. Valid values are:
idle, Startup state of IWF element.
pendingSetup, Pending initial state of IWF element.
setup, Initial state of IWF element.
pendingActivation, Synchronization has been requested, but the
IWF element is not yet in the Synchronization state.
activated, Synchronization state.
holdDisconnect, Flush buffer state, during call clearing the MSC is
responsible for holding the network connection towards the
disconnected party while the IWF completes the data transmission
(flushing any buffered data towards the disconnected party; any
buffered data towards the disconnecting party is discarded.)
currentlySuspended, The call is temporarily switched to speech
phase during a dual services call.ro Enumeration .1.3.6.1.4.1.562.36.2.1.128.101.1.1 |
mscGsmBcMaxUserDataRateThis attribute indicates the user rate which is in affect between the
IWF and the fixed network. A user rate of 1200_75 is 75 bit/s in the
receive direction 1200 bit/s in the transmit direction.ro Enumeration .1.3.6.1.4.1.562.36.2.1.128.101.1.2 |
mscGsmBcConnectionTypeThis attribute indicates the connection types between the terminal
equipment or terminal adaptor and mobile and between the IWF
and the network. Valid connection types are:
asynchronous, Transmission of data which does not require
clocking of the data signal.
synchronous, Transmission of data which requires clocking of the
data signal.ro Enumeration .1.3.6.1.4.1.562.36.2.1.128.101.1.3 |
mscGsmBcDataBitsThis attribute indicates the number of data bits encoded between
start and stop bits in an asynchronous data call connection data
stream. This attribute is set to notApplicable for a synchronous data
call.ro Enumeration .1.3.6.1.4.1.562.36.2.1.128.101.1.4 |
mscGsmBcStopBitsThis attribute indicates the number of stop bits (a mark (binary 1)
placed at the end of each data byte) inserted between the data bits in
an asynchronous data call connection data stream, this marks the
end of the character. This attribute is set to notApplicable for a
synchronous data call.ro Enumeration .1.3.6.1.4.1.562.36.2.1.128.101.1.5 |
mscGsmBcParityThis attribute indicates the type of parity for the data bits in an
asynchronous data call connection data stream. Parity is a redundant
bit that is added to each data byte to aid in error detection. If odd
parity is used, all data bytes have an odd number of 1s, and if even
parity is used, all data bytes have an even number of 1s. Also parity
may be forced to 0, forced to 1, or may not be used at all (required
for sending 8-bit data). This attribute will be set to notApplicable
for a synchronouse data call. Valid values are:
none, No parity.
odd, Odd parity.
even, Even parity.
forced0, Parity forced to 0.
forced1, Parity forced to 1.
notApplicable, Parity not applicable.ro Enumeration .1.3.6.1.4.1.562.36.2.1.128.101.1.6 |
mscGsmBcFlowControlThis attribute indicates the current flow control status of this
GsmIwfBearerChannel for an asynchronous call. For a synchronous
data call this attribute will be set to noFlowControlActive. Valid
values are:
noFlowControlActive, There is no flow control active over the air
interface and network interfaces. The applications at the end points
handle flow control.
inband, Embedded characters in the data stream indicate flow
control.
v110FlowCtnrl, Utilization of V.110 flow control.
errorCntrl, Flow control is handle by datalink protocols.ro Enumeration .1.3.6.1.4.1.562.36.2.1.128.101.1.7 |
mscGsmBcCallTypeThis attribute indicates the current call type. Valid values are:
faxG3, group 3 fax calls
cda31khz, asynchronous 3.1kHz modem
cdaUdi, asynchronous unrestricted digital data call
cdsUdi, synchronous unrestricted digital data call
cds31khz, synchronous 3.1kHz modemro Enumeration .1.3.6.1.4.1.562.36.2.1.128.101.1.8 |
mscGsmBcLastResponseCodeThis attribute indicates the MSC/IWF Interface Protocol (MIP)
response code returned for the last call which was active on this
particular GsmIwfBearerChannel. Valid values are:
requestDone, the call was terminated normally.
systemError, the call was terminated due to a base system problem.
applicationError, the call was terminated due to an application
level problem.
noResources, the call was terminated due to a lack of available
resources.
msgSizeMismatch, Message length does not match length defined
by the MSC/IWF Interface Protocol for the particular message type.
protocolViolation, Failed to perform the request because the coding
of the request message was invalid; message was not understood.
requestNotSupported, Message was understood but not supported
by the IWF or MSC.
requestDenied, Message was understood and supported by the IWF
or MSC but the request is denied.
invalidMessage, Message received is invalid for the current state of
the IWF's state machine or the MSC data call state machine. The
message is ignored.
bufferNotFlushed, Message from the Iwf to the MSC indicating
that the buffers are not flushed as requested by the MSC.
notApplicable, this attribute is not applicable for this call. This is
the default value for this attribute.ro Enumeration .1.3.6.1.4.1.562.36.2.1.128.101.1.9 |
mscGsmBcMateBearerChannelThis attribute contains the name of the mate GsmIwfBearerChannel
that this GsmIwfBearerChannel is involved with in the currently
active call.ro RowPointer .1.3.6.1.4.1.562.36.2.1.128.101.1.10 |
mscGsmBcCidDataTableThis group contains the attribute for a component's Customer
Identifier (CID). Refer to the attribute description for a detailed
explanation of CIDs. SEQUENCE OF MscGsmBcCidDataEntry .1.3.6.1.4.1.562.36.2.1.128.104 |
mscGsmBcCidDataEntryAn entry in the mscGsmBcCidDataTable. MscGsmBcCidDataEntry .1.3.6.1.4.1.562.36.2.1.128.104.1 |
mscGsmBcCustomerIdentifierThis attribute holds the Customer Identifier (CID).
Every component has a CID. If a component has a cid attribute, the
component's CID is the provisioned value of that attribute;
otherwise the component inherits the CID of its parent. The top-
level component has a CID of 0.
Every operator session also has a CID, which is the CID
provisioned for the operator's user ID. An operator will see only the
stream data for components having a matching CID. Also, the
operator will be allowed to issue commands for only those
components which have a matching CID.
An operator CID of 0 is used to identify the Network Manager
(referred to as 'NetMan' in DPN). This CID matches the CID of
any component. Values 1 to 8191 inclusive (equivalent to 'basic
CIDs' in DPN) may be assigned to specific customers.rw Unsigned32 (0 | 1..8191) .1.3.6.1.4.1.562.36.2.1.128.104.1.1 |
mscGsmBcStateTableThis group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. SEQUENCE OF MscGsmBcStateEntry .1.3.6.1.4.1.562.36.2.1.128.105 |
mscGsmBcStateEntryAn entry in the mscGsmBcStateTable. MscGsmBcStateEntry .1.3.6.1.4.1.562.36.2.1.128.105.1 |
mscGsmBcAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.128.105.1.1 |
mscGsmBcOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.ro Enumeration .1.3.6.1.4.1.562.36.2.1.128.105.1.2 |
mscGsmBcUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.ro Enumeration .1.3.6.1.4.1.562.36.2.1.128.105.1.3 |
gsmIwfMIB OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.129 |
IMPORTS Unknown .1.3.6.1.4.1.562.36.2.2.129 |
gsmIwfGroup OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.129.1 |
gsmIwfGroupCA OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.129.1.1 |
gsmIwfGroupCA02 OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.129.1.1.3 |
gsmIwfGroupCA02A OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.129.1.1.3.2 |
gsmIwfCapabilities OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.129.3 |
gsmIwfCapabilitiesCA OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.129.3.1 |
gsmIwfCapabilitiesCA02 OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.129.3.1.3 |
gsmIwfCapabilitiesCA02A OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.129.3.1.3.2 |