Nortel-MsCarrier-MscPassport-Frf5EpMIB
AI MIB Summary
Standard SNMP MIB module defining data structures for Nortel-MsCarrier-MscPassport-Frf5EpMIB.
152
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
152 total| Object Name |
|---|
mscMcsMgrFrf5EpG OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.122.14 |
mscMcsMgrFrf5EpGRowStatusTableThis entry controls the addition and deletion of
mscMcsMgrFrf5EpG components. SEQUENCE OF MscMcsMgrFrf5EpGRowStatusEntry .1.3.6.1.4.1.562.36.2.1.122.14.1 |
mscMcsMgrFrf5EpGRowStatusEntryA single entry in the table represents a single
mscMcsMgrFrf5EpG component. MscMcsMgrFrf5EpGRowStatusEntry .1.3.6.1.4.1.562.36.2.1.122.14.1.1 |
mscMcsMgrFrf5EpGRowStatusThis variable is used as the basis for SNMP naming of
mscMcsMgrFrf5EpG components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.122.14.1.1.1 |
mscMcsMgrFrf5EpGComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.122.14.1.1.2 |
mscMcsMgrFrf5EpGStorageTypeThis variable represents the storage type value for the
mscMcsMgrFrf5EpG tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.122.14.1.1.4 |
mscMcsMgrFrf5EpGIndexThis variable represents the index for the mscMcsMgrFrf5EpG tables. Integer32 .1.3.6.1.4.1.562.36.2.1.122.14.1.1.10 |
mscMcsMgrFrf5EpGAddr OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.122.14.2 |
mscMcsMgrFrf5EpGAddrRowStatusTableThis entry controls the addition and deletion of
mscMcsMgrFrf5EpGAddr components. SEQUENCE OF MscMcsMgrFrf5EpGAddrRowStatusEntry .1.3.6.1.4.1.562.36.2.1.122.14.2.1 |
mscMcsMgrFrf5EpGAddrRowStatusEntryA single entry in the table represents a single
mscMcsMgrFrf5EpGAddr component. MscMcsMgrFrf5EpGAddrRowStatusEntry .1.3.6.1.4.1.562.36.2.1.122.14.2.1.1 |
mscMcsMgrFrf5EpGAddrRowStatusThis variable is used as the basis for SNMP naming of
mscMcsMgrFrf5EpGAddr components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.122.14.2.1.1.1 |
mscMcsMgrFrf5EpGAddrComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.122.14.2.1.1.2 |
mscMcsMgrFrf5EpGAddrStorageTypeThis variable represents the storage type value for the
mscMcsMgrFrf5EpGAddr tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.122.14.2.1.1.4 |
mscMcsMgrFrf5EpGAddrIndexThis variable represents the index for the mscMcsMgrFrf5EpGAddr tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.122.14.2.1.1.10 |
mscMcsMgrFrf5EpGAddrProvTableThis group contains the provisionable attributes of the Address
component. SEQUENCE OF MscMcsMgrFrf5EpGAddrProvEntry .1.3.6.1.4.1.562.36.2.1.122.14.2.10 |
mscMcsMgrFrf5EpGAddrProvEntryAn entry in the mscMcsMgrFrf5EpGAddrProvTable. MscMcsMgrFrf5EpGAddrProvEntry .1.3.6.1.4.1.562.36.2.1.122.14.2.10.1 |
mscMcsMgrFrf5EpGAddrRemoteAddressThis attribute specifies the ATM End System Address (AESA) in
the ISO NSAP format that is used by each EndPoint under this
Frf5EpG to establish a VCC. For example, NSAP ATM address
'45000006138292323F000000000020480D002900'.rw AsciiString .1.3.6.1.4.1.562.36.2.1.122.14.2.10.1.1 |
mscMcsMgrFrf5EpGAddrCommentTextThis optional attribute contains additional textual information to be
added by the network operator.rw AsciiString .1.3.6.1.4.1.562.36.2.1.122.14.2.10.1.2 |
mscMcsMgrFrf5EpGAddrAddrPreTableThis attribute specifies the list of prefixes directed to the EndPoints
under this Frf5EndPointGroup. The individual end point is selected
for each subconnection on the basis of its
supportedTransferPriorities.
For example, E.164 prefix 'e.613722', X.121 prefix 'x.302'. SEQUENCE OF MscMcsMgrFrf5EpGAddrAddrPreEntry .1.3.6.1.4.1.562.36.2.1.122.14.2.362 |
mscMcsMgrFrf5EpGAddrAddrPreEntryAn entry in the mscMcsMgrFrf5EpGAddrAddrPreTable. MscMcsMgrFrf5EpGAddrAddrPreEntry .1.3.6.1.4.1.562.36.2.1.122.14.2.362.1 |
mscMcsMgrFrf5EpGAddrAddrPreValueThis variable represents both the value and the index for the
mscMcsMgrFrf5EpGAddrAddrPreTable.rw AsciiString .1.3.6.1.4.1.562.36.2.1.122.14.2.362.1.1 |
mscMcsMgrFrf5EpGAddrAddrPreRowStatusThis variable is used to control the addition and deletion
of individual values of the mscMcsMgrFrf5EpGAddrAddrPreTable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.122.14.2.362.1.2 |
mscMcsMgrFrf5EpGEp OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.122.14.3 |
mscMcsMgrFrf5EpGEpRowStatusTableThis entry controls the addition and deletion of
mscMcsMgrFrf5EpGEp components. SEQUENCE OF MscMcsMgrFrf5EpGEpRowStatusEntry .1.3.6.1.4.1.562.36.2.1.122.14.3.1 |
mscMcsMgrFrf5EpGEpRowStatusEntryA single entry in the table represents a single
mscMcsMgrFrf5EpGEp component. MscMcsMgrFrf5EpGEpRowStatusEntry .1.3.6.1.4.1.562.36.2.1.122.14.3.1.1 |
mscMcsMgrFrf5EpGEpRowStatusThis variable is used as the basis for SNMP naming of
mscMcsMgrFrf5EpGEp components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.122.14.3.1.1.1 |
mscMcsMgrFrf5EpGEpComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.122.14.3.1.1.2 |
mscMcsMgrFrf5EpGEpStorageTypeThis variable represents the storage type value for the
mscMcsMgrFrf5EpGEp tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.122.14.3.1.1.4 |
mscMcsMgrFrf5EpGEpIndexThis variable represents the index for the mscMcsMgrFrf5EpGEp tables. Integer32 .1.3.6.1.4.1.562.36.2.1.122.14.3.1.1.10 |
mscMcsMgrFrf5EpGEpLmi OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.122.14.3.2 |
mscMcsMgrFrf5EpGEpLmiRowStatusTableThis entry controls the addition and deletion of
mscMcsMgrFrf5EpGEpLmi components. SEQUENCE OF MscMcsMgrFrf5EpGEpLmiRowStatusEntry .1.3.6.1.4.1.562.36.2.1.122.14.3.2.1 |
mscMcsMgrFrf5EpGEpLmiRowStatusEntryA single entry in the table represents a single
mscMcsMgrFrf5EpGEpLmi component. MscMcsMgrFrf5EpGEpLmiRowStatusEntry .1.3.6.1.4.1.562.36.2.1.122.14.3.2.1.1 |
mscMcsMgrFrf5EpGEpLmiRowStatusThis variable is used as the basis for SNMP naming of
mscMcsMgrFrf5EpGEpLmi components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.122.14.3.2.1.1.1 |
mscMcsMgrFrf5EpGEpLmiComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.122.14.3.2.1.1.2 |
mscMcsMgrFrf5EpGEpLmiStorageTypeThis variable represents the storage type value for the
mscMcsMgrFrf5EpGEpLmi tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.122.14.3.2.1.1.4 |
mscMcsMgrFrf5EpGEpLmiIndexThis variable represents the index for the mscMcsMgrFrf5EpGEpLmi tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.122.14.3.2.1.1.10 |
mscMcsMgrFrf5EpGEpLmiParmsTableThis group contains the provisionable attributes of the Local
Management Interface component. SEQUENCE OF MscMcsMgrFrf5EpGEpLmiParmsEntry .1.3.6.1.4.1.562.36.2.1.122.14.3.2.10 |
mscMcsMgrFrf5EpGEpLmiParmsEntryAn entry in the mscMcsMgrFrf5EpGEpLmiParmsTable. MscMcsMgrFrf5EpGEpLmiParmsEntry .1.3.6.1.4.1.562.36.2.1.122.14.3.2.10.1 |
mscMcsMgrFrf5EpGEpLmiProceduresThis attribute selects the procedures to be used for the Local
Management Interface. The following are the supported procedures:
none: no Local Management Interface procedures are running on
the ATM VCC. This accomodates remote interworking functions
which do not implement LMI procedures. In this case, the
remaining attributes of this group will be ignored.
ccitt: Local Management Interface procedures from the CCITT
specification are supported. Dlci/0 is used for the LMI protocol, to
comply with FRF.5.
ansi: Local Management Interface procedures from the ANSI
specification are supported. DLCI 0 is used for the LMI protocol.rw Enumeration .1.3.6.1.4.1.562.36.2.1.122.14.3.2.10.1.1 |
mscMcsMgrFrf5EpGEpLmiAsyncStatusReportThis attribute selects the use of asynchronous PVC status report
procedures as specified in the CCITT specification (ITU-T Q.933,
Annex A), and the ANSI specification Annex D.rw Enumeration .1.3.6.1.4.1.562.36.2.1.122.14.3.2.10.1.2 |
mscMcsMgrFrf5EpGEpLmiErrorEventThresholdFor the network side procedure, an event is defined as follows: (1)
receipt of a STATUS ENQUIRY message, or (2) expiration of timer
T392. An error event is (1) nonreceipt of STATUS ENQUIRY in
T392 seconds; (2) invalid format of an LMI message; (3) invalid
receive sequence number.
For the user side procedure, an event is defined as a polling cycle or
a status enquiry and status report exchange. An error event is (1)
non-receipt of a STATUS within the polling cycle, or (2) invalid
format of an LMI message, or (3) invalid sequence number.
This attribute specifies the number of error events which, if they
occur within eventCount events, will cause a protocol error
condition. The condition is cleared after eventCount sequential
correct events occur.
It must be less than or equal to eventCount (n393).rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.122.14.3.2.10.1.3 |
mscMcsMgrFrf5EpGEpLmiEventCountThis attribute specifies the number of contiguous events within
which no more than eventErrorThreshold error events are allowed.
It must be greater than or equal to errorEventThreshold (n392).rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.122.14.3.2.10.1.4 |
mscMcsMgrFrf5EpGEpLmiCheckPointTimerThis attribute selects the time (in seconds) within which a STATUS
ENQUIRY message is expected. It must be greater than
linkVerificationTimer (t391).rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.122.14.3.2.10.1.5 |
mscMcsMgrFrf5EpGEpLmiSideThis attribute selects the user side procedure (DTE), or the network
side procedure (DCE), or both the user side and the network side
procedures of the LMI.
This attribute can be set to user, network or both.rw Enumeration .1.3.6.1.4.1.562.36.2.1.122.14.3.2.10.1.8 |
mscMcsMgrFrf5EpGEpLmiNniParmsTableThis group contains the provisionable attributes of the FRF.5 LMI
procedures which are unique to NNI. SEQUENCE OF MscMcsMgrFrf5EpGEpLmiNniParmsEntry .1.3.6.1.4.1.562.36.2.1.122.14.3.2.11 |
mscMcsMgrFrf5EpGEpLmiNniParmsEntryAn entry in the mscMcsMgrFrf5EpGEpLmiNniParmsTable. MscMcsMgrFrf5EpGEpLmiNniParmsEntry .1.3.6.1.4.1.562.36.2.1.122.14.3.2.11.1 |
mscMcsMgrFrf5EpGEpLmiFullStatusPollingCyclesThis attribute specifies how frequently the FRF.5 LMI initiates a
Status Enquiry for a full PVC status report. A polling cycle is a
Status Enquiry and Status Report exchange.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.122.14.3.2.11.1.1 |
mscMcsMgrFrf5EpGEpLmiLinkVerificationTimerThis attribute specifies how frequently the FRF.5 LMI initiates a
Status Enquiry for link integrity verification. It must be less than
checkPointTimer (t392).rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.122.14.3.2.11.1.2 |
mscMcsMgrFrf5EpGEpLmiStateTableThis group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. SEQUENCE OF MscMcsMgrFrf5EpGEpLmiStateEntry .1.3.6.1.4.1.562.36.2.1.122.14.3.2.12 |
mscMcsMgrFrf5EpGEpLmiStateEntryAn entry in the mscMcsMgrFrf5EpGEpLmiStateTable. MscMcsMgrFrf5EpGEpLmiStateEntry .1.3.6.1.4.1.562.36.2.1.122.14.3.2.12.1 |
mscMcsMgrFrf5EpGEpLmiAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.122.14.3.2.12.1.1 |
mscMcsMgrFrf5EpGEpLmiOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.ro Enumeration .1.3.6.1.4.1.562.36.2.1.122.14.3.2.12.1.2 |
mscMcsMgrFrf5EpGEpLmiUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.ro Enumeration .1.3.6.1.4.1.562.36.2.1.122.14.3.2.12.1.3 |
mscMcsMgrFrf5EpGEpLmiPsiTableThis group provides the protocol status of the Local Management
Interface. SEQUENCE OF MscMcsMgrFrf5EpGEpLmiPsiEntry .1.3.6.1.4.1.562.36.2.1.122.14.3.2.13 |
mscMcsMgrFrf5EpGEpLmiPsiEntryAn entry in the mscMcsMgrFrf5EpGEpLmiPsiTable. MscMcsMgrFrf5EpGEpLmiPsiEntry .1.3.6.1.4.1.562.36.2.1.122.14.3.2.13.1 |
mscMcsMgrFrf5EpGEpLmiProtocolStatusThis attribute indicates whether the LMI is in an error condition or
whether the protocol is behaving normally. This attribute will be set
to errorCondition after enough LMI errors have been detected to
warrant a change in condition. This occurs when n392 of the last
n393 events are in error.
The error condition is lifted when a sufficient number of
consecutive events has occurred without error. This occurs when
n393 consecutive good events take place.
The consequence of an error condition is that all DLCIs on this
interface will become inactive in both directions.ro Enumeration .1.3.6.1.4.1.562.36.2.1.122.14.3.2.13.1.1 |
mscMcsMgrFrf5EpGEpLmiStatsTableThis group contains the operational statistics for the FRF.5 NNI
Local Management Interface. SEQUENCE OF MscMcsMgrFrf5EpGEpLmiStatsEntry .1.3.6.1.4.1.562.36.2.1.122.14.3.2.14 |
mscMcsMgrFrf5EpGEpLmiStatsEntryAn entry in the mscMcsMgrFrf5EpGEpLmiStatsTable. MscMcsMgrFrf5EpGEpLmiStatsEntry .1.3.6.1.4.1.562.36.2.1.122.14.3.2.14.1 |
mscMcsMgrFrf5EpGEpLmiKeepAliveStatusToInterfaceThis attribute counts the Local Management Interface keep alive
status messages sent to the ATM VCC in response to a status
enquiry for keep alive status. When the maximum count is reached
it wraps to zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.122.14.3.2.14.1.1 |
mscMcsMgrFrf5EpGEpLmiFullStatusToInterfaceThis attribute counts the Local Management Interface full status
messages sent to the ATM VCC in response to a status enquiry for
keep alive or full status. When the maximum count is reached it
wraps to zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.122.14.3.2.14.1.2 |
mscMcsMgrFrf5EpGEpLmiKeepAliveStatusEnqFromInterfaceThis attribute counts the Local Management Interface valid keep
alive status enquiry messages received from the ATM VCC. When
the maximum count is reached it wraps to zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.122.14.3.2.14.1.3 |
mscMcsMgrFrf5EpGEpLmiFullStatusEnqFromInterfaceThis attribute counts the Local Management Interface valid full
status enquiry messages received from the ATM VCC. When the
maximum count is reached it wraps to zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.122.14.3.2.14.1.4 |
mscMcsMgrFrf5EpGEpLmiNetworkSideEventHistoryThis attribute displays the Local Management Interface network
side procedure event history in order of occurrence. An event is
represented by a single symbol. A '+' symbol indicates a good
event. An 'X' symbol indicates a protocol error event. The left most
event is the most recent to occur. The provisioned eventCount
dictates the maximum number of events displayed. A good event is
triggered by receipt of a valid status enquiry message. An error
event is either a T392 timer expiry or receipt of a status enquiry
with an incorrect sequence number.ro AsciiString .1.3.6.1.4.1.562.36.2.1.122.14.3.2.14.1.5 |
mscMcsMgrFrf5EpGEpLmiUserSideEventHistoryThis attribute displays the Local Management Interface user side
procedure event history in order of occurrence. An event is
represented by a single symbol. A '+' symbol indicates a good
event. An 'X' symbol indicates a protocol error event. The left most
event is the most recent to occur. The provisioned eventCount
dictates the maximum number of events displayed. A good event is
triggered by receipt of a valid status message. An error event is
either a T391 timer expiry or receipt of a status message with an
incorrect sequence number.ro AsciiString .1.3.6.1.4.1.562.36.2.1.122.14.3.2.14.1.6 |
mscMcsMgrFrf5EpGEpLmiProtocolErrorsThis attribute counts the number of Local Management Interface
protocol errors. It is the sum of the sequence (sequenceErrors and
statusSequenceErrors) and timeout (pollingVerifTimeouts and
noStatusReportCount) errors. When the maximum count is reached
it wraps to zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.122.14.3.2.14.1.7 |
mscMcsMgrFrf5EpGEpLmiUnexpectedIesThis attribute counts the number of Local Managament Interface
frames received with an Information Element identifier that is
unknown or unexpected. An unexpected Information Element is not
a protocol error. When the maximum count is reached, this counter
wraps to zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.122.14.3.2.14.1.8 |
mscMcsMgrFrf5EpGEpLmiSequenceErrorsThis attribute counts the number of Local Management Interface
Status Enquiry message sequence errors. A sequence error is receipt
of a Status Enquiry message with a receive sequence number not
equal to the last send sequence number. When the maximum count
is reached the counter wraps to zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.122.14.3.2.14.1.9 |
mscMcsMgrFrf5EpGEpLmiStatusSequenceErrorsThis attribute counts the number of Local Management Interface
Status message sequence errors. A sequence error is receipt of a
Status message with a receive sequence number not equal to the last
send sequence number. When the maximum count is reached the
counter wraps to zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.122.14.3.2.14.1.10 |
mscMcsMgrFrf5EpGEpLmiUnexpectedReportsThis attribute counts the number of Local Management Interface
frames received with an unknown or unexpected report type. An
unexpected report type is not a protocol error. When the maximum
count is reached the counter wraps to zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.122.14.3.2.14.1.11 |
mscMcsMgrFrf5EpGEpLmiPollingVerifTimeoutsThis attribute counts the checkPointTimer (T392) expiries occurring
on the Local Management Interface. When the maximum count is
reached the counter wraps to zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.122.14.3.2.14.1.12 |
mscMcsMgrFrf5EpGEpLmiNoStatusReportCountThis attribute counts the number of times when no status report or
an invalid status report comes from the external network. This
attribute is incremented:
i) after a status enquiry is sent out and the T391 timer expires
without having a status report received.
ii) if an invalid status report is received.
When the maximum count is reached it wraps to zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.122.14.3.2.14.1.13 |
mscMcsMgrFrf5EpGEpLmiKeepAliveEnqToIfThis attribute counts the number of Local Management Interface
keep alive enquiry status messages sent to the external user device
for keep alive status. When the maximum count is reached it wraps
to zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.122.14.3.2.14.1.14 |
mscMcsMgrFrf5EpGEpLmiFullStatusEnqToIfThis attribute counts the number of Local Management Interface
full status messages sent to the external user device in response to a
status enquiry for keep alive or full status. When the maximum
count is reached it wraps to zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.122.14.3.2.14.1.15 |
mscMcsMgrFrf5EpGEpEpd OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.122.14.3.3 |
mscMcsMgrFrf5EpGEpEpdRowStatusTableThis entry controls the addition and deletion of
mscMcsMgrFrf5EpGEpEpd components. SEQUENCE OF MscMcsMgrFrf5EpGEpEpdRowStatusEntry .1.3.6.1.4.1.562.36.2.1.122.14.3.3.1 |
mscMcsMgrFrf5EpGEpEpdRowStatusEntryA single entry in the table represents a single
mscMcsMgrFrf5EpGEpEpd component. MscMcsMgrFrf5EpGEpEpdRowStatusEntry .1.3.6.1.4.1.562.36.2.1.122.14.3.3.1.1 |
mscMcsMgrFrf5EpGEpEpdRowStatusThis variable is used as the basis for SNMP naming of
mscMcsMgrFrf5EpGEpEpd components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.122.14.3.3.1.1.1 |
mscMcsMgrFrf5EpGEpEpdComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.122.14.3.3.1.1.2 |
mscMcsMgrFrf5EpGEpEpdStorageTypeThis variable represents the storage type value for the
mscMcsMgrFrf5EpGEpEpd tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.122.14.3.3.1.1.4 |
mscMcsMgrFrf5EpGEpEpdIndexThis variable represents the index for the mscMcsMgrFrf5EpGEpEpd tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.122.14.3.3.1.1.10 |
mscMcsMgrFrf5EpGEpEpdProvTableThis group contains the provisionable attributes of the FRF.5 End
Point. SEQUENCE OF MscMcsMgrFrf5EpGEpEpdProvEntry .1.3.6.1.4.1.562.36.2.1.122.14.3.3.10 |
mscMcsMgrFrf5EpGEpEpdProvEntryAn entry in the mscMcsMgrFrf5EpGEpEpdProvTable. MscMcsMgrFrf5EpGEpEpdProvEntry .1.3.6.1.4.1.562.36.2.1.122.14.3.3.10.1 |
mscMcsMgrFrf5EpGEpEpdRemoteConnectionIdentifierThis attribute specifies the remote connection identifier. It either
represents the VPI.VCI logical channel number assignment of a
remote ATM interface, or the Endpoint.Frf5EndPointGroup
instances of a remote Passport FRF.5 EndPoint.rw IntegerSequence .1.3.6.1.4.1.562.36.2.1.122.14.3.3.10.1.3 |
mscMcsMgrFrf5EpGEpEpdConnectionTransferPriorityThis attribute specifies the transfer priority used to establish the
ATM connection. The EndPoint references the ModuleData
FrameRelayService AtmNetworking TransferPriority/n component
to determine the ATM service category to be used by the
connection.
This attribute is also used to determine which EndPoint within an
Frf5EndPointGroup is to multiplex a particular FrAtm Dlci.
DESCRIPTIONrw Unsigned32 .1.3.6.1.4.1.562.36.2.1.122.14.3.3.10.1.4 |
mscMcsMgrFrf5EpGEpEpdCommittedInformationRateThis attribute specifies the committed information rate (CIR), and
represents the rate at which the network FRF.5 ATM VCC agrees to
transfer information under normal conditions. A conservative CIR
value would be the sum of the CIRs of all the individual FrAtm
Dlcis multiplexed by the VCC.
The cir is converted into ATM service parameters according to the
conversion policy specified by the connectionTransferPriority
attribute. The conversion policy is defined under the ModuleData
FrameRelayService AtmNetworking TransferPriority/n component.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.122.14.3.3.10.1.5 |
mscMcsMgrFrf5EpGEpEpdExcessInformationRateThis attribute specifies the excess information rate (EIR), and
represents the rate at which the network FRF.5 ATM VCC attempts
to transfer information. A conservative EIR value would be the sum
of the EIRs of all the individual FrAtm Dlcis multiplexed by the
VCC.
The eir is converted into ATM service parameters according to the
conversion policy specified by the connectionTransferPriority
attribute. The conversion policy is defined under the ModuleData
FrameRelayService AtmNetworking TransferPriority/n component.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.122.14.3.3.10.1.6 |
mscMcsMgrFrf5EpGEpEpdCommittedBurstSizeThis attribute specifies the committed burst size (Bc), and represents
the amount of data that the network FRF.5 ATM VCC agrees to
transfer under normal conditions. A conservative Bc value would be
the sum of the Bcs of all the individual FrAtm Dlcis multiplexed by
the VCC.
The bc is converted into ATM service parameters according to the
conversion policy specified by the connectionTransferPriority
attribute. The conversion policy is defined under the ModuleData
FrameRelayService AtmNetworking TransferPriority/n component.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.122.14.3.3.10.1.7 |
mscMcsMgrFrf5EpGEpEpdTypeThis attribute specifies the FRF.5 End Point type. If the value is
provisioned as master, this End Point is responsible for initiating
the SPVC call to set up the FRF.5 ATM VCC. If the value is
provisioned as slave, this End Point receives call setup requests
from a master remote end.rw Enumeration .1.3.6.1.4.1.562.36.2.1.122.14.3.3.10.1.8 |
mscMcsMgrFrf5EpGEpEpdAccessRateThis attribute represents the access rate of the FRF.5 EndPoint. A
conservative value would be the sum of the access rates of all the
FrAtms' that have DLCIs multiplexed by the VCC. The access rate
is converted into ATM service parameters when conversion policies
3, 4 and 5 are used. For policy 6, this attribute is ignored.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.122.14.3.3.10.1.9 |
mscMcsMgrFrf5EpGEpEpdExcessBurstSizeThis attribute specifies the excess burst size (Be), and represents the
amount of uncommitted data that the network FRF.5 ATM VCC
agrees to transfer under normal conditions. A conservative Be value
would be the sum of the Bes of all the individual FrAtm Dlcis
multiplexed by the VCC.
The be is converted into ATM service parameters according to the
conversion policy specified by the connectionTransferPriority
attribute. The conversion policy is defined under the ModuleData
FrameRelayService AtmNetworking TransferPriority/n component.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.122.14.3.3.10.1.10 |
mscMcsMgrFrf5EpGEpEpdCidDataTableThis group contains the attribute for a component's Customer
Identifier (CID). Refer to the attribute description for a detailed
explanation of CIDs. SEQUENCE OF MscMcsMgrFrf5EpGEpEpdCidDataEntry .1.3.6.1.4.1.562.36.2.1.122.14.3.3.11 |
mscMcsMgrFrf5EpGEpEpdCidDataEntryAn entry in the mscMcsMgrFrf5EpGEpEpdCidDataTable. MscMcsMgrFrf5EpGEpEpdCidDataEntry .1.3.6.1.4.1.562.36.2.1.122.14.3.3.11.1 |
mscMcsMgrFrf5EpGEpEpdCustomerIdentifierThis attribute holds the Customer Identifier (CID).
Every component has a CID. If a component has a cid attribute, the
component's CID is the provisioned value of that attribute;
otherwise the component inherits the CID of its parent. The top-
level component has a CID of 0.
Every operator session also has a CID, which is the CID
provisioned for the operator's user ID. An operator will see only the
stream data for components having a matching CID. Also, the
operator will be allowed to issue commands for only those
components which have a matching CID.
An operator CID of 0 is used to identify the Network Manager
(referred to as 'NetMan' in DPN). This CID matches the CID of
any component. Values 1 to 8191 inclusive (equivalent to 'basic
CIDs' in DPN) may be assigned to specific customers.rw Unsigned32 (0 | 1..8191) .1.3.6.1.4.1.562.36.2.1.122.14.3.3.11.1.1 |
mscMcsMgrFrf5EpGEpDlci OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.122.14.3.4 |
mscMcsMgrFrf5EpGEpDlciRowStatusTable*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This entry controls the addition and deletion of
mscMcsMgrFrf5EpGEpDlci components. SEQUENCE OF MscMcsMgrFrf5EpGEpDlciRowStatusEntry .1.3.6.1.4.1.562.36.2.1.122.14.3.4.1 |
mscMcsMgrFrf5EpGEpDlciRowStatusEntryA single entry in the table represents a single
mscMcsMgrFrf5EpGEpDlci component. MscMcsMgrFrf5EpGEpDlciRowStatusEntry .1.3.6.1.4.1.562.36.2.1.122.14.3.4.1.1 |
mscMcsMgrFrf5EpGEpDlciRowStatusThis variable is used as the basis for SNMP naming of
mscMcsMgrFrf5EpGEpDlci components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.122.14.3.4.1.1.1 |
mscMcsMgrFrf5EpGEpDlciComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.122.14.3.4.1.1.2 |
mscMcsMgrFrf5EpGEpDlciStorageTypeThis variable represents the storage type value for the
mscMcsMgrFrf5EpGEpDlci tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.122.14.3.4.1.1.4 |
mscMcsMgrFrf5EpGEpDlciIndexThis variable represents the index for the mscMcsMgrFrf5EpGEpDlci tables. Integer32 (16..1007 | 1022) .1.3.6.1.4.1.562.36.2.1.122.14.3.4.1.1.10 |
mscMcsMgrFrf5EpGEpDlciOperTable*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This group contains the operational attributes for the FRF.5 DLCI. SEQUENCE OF MscMcsMgrFrf5EpGEpDlciOperEntry .1.3.6.1.4.1.562.36.2.1.122.14.3.4.10 |
mscMcsMgrFrf5EpGEpDlciOperEntryAn entry in the mscMcsMgrFrf5EpGEpDlciOperTable. MscMcsMgrFrf5EpGEpDlciOperEntry .1.3.6.1.4.1.562.36.2.1.122.14.3.4.10.1 |
mscMcsMgrFrf5EpGEpDlciABitStatusToIfThis attribute indicates the most recent A-bit status sent to the ATM
VCC. If the value is inactive, the reason for the LMI failure is given
by the aBitReasonToNetwork.ro Enumeration .1.3.6.1.4.1.562.36.2.1.122.14.3.4.10.1.1 |
mscMcsMgrFrf5EpGEpDlciABitReasonToIfThis attribute indicates the reason for the latest inactive A-bit status
sent to the ATM VCC.
The value is notApplicable when the aBitStatusToNetwork is active.
The value is remoteUserSignaled if the FrAtm originating the A-Bit
status has detected that the virtual circuit is down at the remote
network through the LMI protocol. The FrAtm must be running
network site LMI protocol for this A-Bit status reason to be sent.
The value is localLmiError if the LMI protocol is down at this Ep.
The value is remoteLmiError if the LMI protocol is down at the
FrAtm originating this A-Bit status reason.
The value is localLinkDown if the physical interface is disabled at
this Ep.
The value is pvcDown if no A-Bit status has been sent to this Ep
(i.e., no A-Bit status has been relayed from the FrAtm).
The value is remoteLinkDown if the physical interface is disabled
at the FrAtm originating this A-Bit status reason.ro Enumeration .1.3.6.1.4.1.562.36.2.1.122.14.3.4.10.1.2 |
mscMcsMgrFrf5EpGEpDlciABitStatusFromIfThis attribute indicates the most recent A-bit status received from
the ATM VCC. If the value is inactive, the reason for the LMI
failure is given by the aBitReasonFromNetwork.ro Enumeration .1.3.6.1.4.1.562.36.2.1.122.14.3.4.10.1.3 |
mscMcsMgrFrf5EpGEpDlciABitReasonFromIfThis attributes indicates the reason for the latest inactive A-bit
status received from the ATM VCC.
The value is notApplicable when the aBitStatusFromNetwork is
active.
The value is remoteUserSignaled if the remote FRF.5 End Point
originating the A-Bit status has detected that the virtual circuit is
down at the remote network through the LMI protocol. The remote
FRF.5 End Point must be running network site LMI protocol for this
A-Bit status reason to be sent.
The value is localLmiError if the LMI protocol is down at this Ep.
The value is localLinkDown if the physical interface is disabled at
this Ep.
The value is missingFromLmiReport if the remote FRF.5 End Point
did not provide a reason along with the inactive A-Bit status.ro Enumeration .1.3.6.1.4.1.562.36.2.1.122.14.3.4.10.1.4 |
mscMcsMgrFrf5EpGEpDlciAccessConnectionComponentThis attribute identifies the FrAtm Dlci to which this Dlci
component is bound.ro AsciiString .1.3.6.1.4.1.562.36.2.1.122.14.3.4.10.1.5 |
mscMcsMgrFrf5EpGEpAtmCon OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.122.14.3.5 |
mscMcsMgrFrf5EpGEpAtmConRowStatusTableThis entry controls the addition and deletion of
mscMcsMgrFrf5EpGEpAtmCon components. SEQUENCE OF MscMcsMgrFrf5EpGEpAtmConRowStatusEntry .1.3.6.1.4.1.562.36.2.1.122.14.3.5.1 |
mscMcsMgrFrf5EpGEpAtmConRowStatusEntryA single entry in the table represents a single
mscMcsMgrFrf5EpGEpAtmCon component. MscMcsMgrFrf5EpGEpAtmConRowStatusEntry .1.3.6.1.4.1.562.36.2.1.122.14.3.5.1.1 |
mscMcsMgrFrf5EpGEpAtmConRowStatusThis variable is used as the basis for SNMP naming of
mscMcsMgrFrf5EpGEpAtmCon components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.122.14.3.5.1.1.1 |
mscMcsMgrFrf5EpGEpAtmConComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.122.14.3.5.1.1.2 |
mscMcsMgrFrf5EpGEpAtmConStorageTypeThis variable represents the storage type value for the
mscMcsMgrFrf5EpGEpAtmCon tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.122.14.3.5.1.1.4 |
mscMcsMgrFrf5EpGEpAtmConIndexThis variable represents the index for the mscMcsMgrFrf5EpGEpAtmCon tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.122.14.3.5.1.1.10 |
mscMcsMgrFrf5EpGEpAtmConOperTableThis attribute group contains the operational attributes for the
NapAtmConnection component. SEQUENCE OF MscMcsMgrFrf5EpGEpAtmConOperEntry .1.3.6.1.4.1.562.36.2.1.122.14.3.5.10 |
mscMcsMgrFrf5EpGEpAtmConOperEntryAn entry in the mscMcsMgrFrf5EpGEpAtmConOperTable. MscMcsMgrFrf5EpGEpAtmConOperEntry .1.3.6.1.4.1.562.36.2.1.122.14.3.5.10.1 |
mscMcsMgrFrf5EpGEpAtmConNextHopThis attribute shows the component name of the AtmIf Vcc Ep or
AtmCon component to which this switched connection is
established.ro RowPointer .1.3.6.1.4.1.562.36.2.1.122.14.3.5.10.1.1 |
mscMcsMgrFrf5EpGEpStateTableThis group contains the three OSI State attributes and the six OSI
Status attributes. The descriptions generically indicate what each
attribute implies about the component. Note that not all the values
and state combinations described here are supported by every
component which uses this group. For component-specific
information and the valid state combinations, refer to NTP 241-
7001-150, Passport Operations and Maintenance Guide. SEQUENCE OF MscMcsMgrFrf5EpGEpStateEntry .1.3.6.1.4.1.562.36.2.1.122.14.3.10 |
mscMcsMgrFrf5EpGEpStateEntryAn entry in the mscMcsMgrFrf5EpGEpStateTable. MscMcsMgrFrf5EpGEpStateEntry .1.3.6.1.4.1.562.36.2.1.122.14.3.10.1 |
mscMcsMgrFrf5EpGEpAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.122.14.3.10.1.1 |
mscMcsMgrFrf5EpGEpOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.122.14.3.10.1.2 |
mscMcsMgrFrf5EpGEpUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.122.14.3.10.1.3 |
mscMcsMgrFrf5EpGEpAvailabilityStatusIf supported by the component, this attribute indicates the OSI
Availability status of the component. Note that, even though it is
defined as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value inTest indicates that the resource is undergoing a test
procedure. If adminState is locked or shuttingDown, the normal
users are precluded from using the resource and controlStatus is
reservedForTest. Tests that do not exclude additional users can be
present in any operational or administrative state but the
reservedForTest condition should not be present.
The value failed indicates that the component has an internal fault
that prevents it from operating. The operationalState is disabled.
The value dependency indicates that the component cannot operate
because some other resource on which it depends is unavailable.
The operationalState is disabled.
The value powerOff indicates the resource requires power to be
applied and it is not powered on. The operationalState is disabled.
The value offLine indicates the resource requires a routine
operation (either manual, automatic, or both) to be performed to
place it on-line and make it available for use. The operationalState
is disabled.
The value offDuty indicates the resource is inactive in accordance
with a predetermined time schedule. In the absence of other
disabling conditions, the operationalState is enabled or disabled.
The value degraded indicates the service provided by the
component is degraded in some way, such as in speed or operating
capacity. However, the resource remains available for service. The
operationalState is enabled.
The value notInstalled indicates the resource is not present. The
operationalState is disabled.
The value logFull is not used.
Description of bits:
inTest(0)
failed(1)
powerOff(2)
offLine(3)
offDuty(4)
dependency(5)
degraded(6)
notInstalled(7)
logFull(8)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.122.14.3.10.1.4 |
mscMcsMgrFrf5EpGEpProceduralStatusIf supported by the component, this attribute indicates the OSI
Procedural status of the component. Note that, even though it is
defined as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value initializationRequired indicates (for a resource which
doesn't initialize autonomously) that initialization is required before
it can perform its normal functions, and this procedure has not been
initiated. The operationalState is disabled.
The value notInitialized indicates (for a resource which does
initialize autonomously) that initialization is required before it can
perform its normal functions, and this procedure has not been
initiated. The operationalState may be enabled or disabled.
The value initializing indicates that initialization has been initiated
but is not yet complete. The operationalState may be enabled or
disabled.
The value reporting indicates the resource has completed some
processing operation and is notifying the results. The
operationalState is enabled.
The value terminating indicates the component is in a termination
phase. If the resource doesn't reinitialize autonomously,
operationalState is disabled; otherwise it is enabled or disabled.
Description of bits:
initializationRequired(0)
notInitialized(1)
initializing(2)
reporting(3)
terminating(4)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.122.14.3.10.1.5 |
mscMcsMgrFrf5EpGEpControlStatusIf supported by the component, this attribute indicates the OSI
Control status of the component. Note that, even though it is defined
as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value subjectToTest indicates the resource is available but tests
may be conducted simultaneously at unpredictable times, which
may cause it to exhibit unusual characteristics.
The value partOfServicesLocked indicates that part of the service is
restricted from users of a resource. The adminState is unlocked.
The value reservedForTest indicates that the component is
administratively unavailable because it is undergoing a test
procedure. The adminState is locked.
The value suspended indicates that the service has been
administratively suspended.
Description of bits:
subjectToTest(0)
partOfServicesLocked(1)
reservedForTest(2)
suspended(3)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.122.14.3.10.1.6 |
mscMcsMgrFrf5EpGEpAlarmStatusIf supported by the component, this attribute indicates the OSI
Alarm status of the component. Note that, even though it is defined
as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value underRepair indicates the component is currently being
repaired. The operationalState is enabled or disabled.
The value critical indicates one or more critical alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value major indicates one or more major alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value minor indicates one or more minor alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value alarmOutstanding generically indicates that an alarm of
some severity is outstanding against the component.
Description of bits:
underRepair(0)
critical(1)
major(2)
minor(3)
alarmOutstanding(4)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.122.14.3.10.1.7 |
mscMcsMgrFrf5EpGEpStandbyStatusIf supported by the component, this attribute indicates the OSI
Standby status of the component.
The value notSet indicates that either the attribute is not supported
or that none of the status conditions described below are present.
Note that this is a non-standard value, used because the original
specification indicated this attribute was set-valued and thus, did not
provide a value to indicate that none of the other three are
applicable.
The value hotStandby indicates that the resource is not providing
service but will be immediately able to take over the role of the
resource to be backed up, without initialization activity, and
containing the same information as the resource to be backed up.
The value coldStandby indicates the resource is a backup for
another resource but will not be immediately able to take over the
role of the backed up resource and will require some initialization
activity.
The value providingService indicates that this component, as a
backup resource, is currently backing up another resource.ro Enumeration .1.3.6.1.4.1.562.36.2.1.122.14.3.10.1.8 |
mscMcsMgrFrf5EpGEpUnknownStatusThis attribute indicates the OSI Unknown status of the component.
The value false indicates that all of the other OSI State and Status
attribute values can be considered accurate.
The value true indicates that the actual state of the component is not
known for sure.ro Enumeration .1.3.6.1.4.1.562.36.2.1.122.14.3.10.1.9 |
mscMcsMgrFrf5EpGEpOperTableThis group contains the operational attributes for the FRF.5 ATM
connection. SEQUENCE OF MscMcsMgrFrf5EpGEpOperEntry .1.3.6.1.4.1.562.36.2.1.122.14.3.11 |
mscMcsMgrFrf5EpGEpOperEntryAn entry in the mscMcsMgrFrf5EpGEpOperTable. MscMcsMgrFrf5EpGEpOperEntry .1.3.6.1.4.1.562.36.2.1.122.14.3.11.1 |
mscMcsMgrFrf5EpGEpLastVccClearCauseThis attribute indicates the clear cause value of the last SPVC
release message received on the FRF.5 end point Vcc pipe.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.122.14.3.11.1.4 |
mscMcsMgrFrf5EpGEpConnectionTransferPriorityThis attribute indicates the transfer priority used to establish the
ATM connection and to multiplex the Frame Relay DLCIs.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.122.14.3.11.1.5 |
mscMcsMgrFrf5EpGEpServiceCategoryThis attribute indicates the ATM service category that is used for
this connection.ro Enumeration .1.3.6.1.4.1.562.36.2.1.122.14.3.11.1.6 |
mscMcsMgrFrf5EpGEpPeakCellRate01This attribute indicates the Peak Cell Rate (PCR) of the FRF.5 ATM
VCC for all cells (with CLP=0 and CLP=1).
The pcr01 is derived from the End Point traffic parameters using the
conversion policy of the connectionTransferPriority. The
conversion policy is defined under the ModuleData
FrameRelayService AtmNetworking TransferPriority/n component.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.122.14.3.11.1.8 |
mscMcsMgrFrf5EpGEpSustainedCellRate0This attribute indicates the Sustained Cell Rate (SCR) of the FRF.5
ATM VCC for high priority cells (with CLP=0).
The scr0 is derived from the End Point traffic parameters using the
conversion policy of the connectionTransferPriority. The
conversion policy is defined under the ModuleData
FrameRelayService AtmNetworking TransferPriority/n component.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.122.14.3.11.1.9 |
mscMcsMgrFrf5EpGEpSustainedCellRate01This attribute indicates the Sustained Cell Rate (SCR) of the FRF.5
ATM VCC for all cells (with CLP=0 and CLP=1).
The scr01 is derived from the End Point traffic parameters using the
conversion policy of the connectionTransferPriority. The
conversion policy is defined under the ModuleData
FrameRelayService AtmNetworking TransferPriority/n component.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.122.14.3.11.1.10 |
mscMcsMgrFrf5EpGEpMaximumBurstSize0This attribute indicates the Maximum Burst Size (MBS) of the
FRF.5 ATM VCC for high priority cells (with CLP=0).
The mbs0 is derived from the End Point traffic parameters using the
conversion policy of the connectionTransferPriority. The
conversion policy is defined under the ModuleData
FrameRelayService AtmNetworking TransferPriority/n component.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.122.14.3.11.1.11 |
mscMcsMgrFrf5EpGEpMaximumBurstSize01This attribute indicates the Maximum Burst Size (MBS) of the
FRF.5 ATM VCC for all cells (with CLP=0 and CLP=1).
The mbs01 is derived from the End Point traffic parameters using
the conversion policy of the connectionTransferPriority. The
conversion policy is defined under the ModuleData
FrameRelayService AtmNetworking TransferPriority/n component.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.122.14.3.11.1.12 |
mscMcsMgrFrf5EpGEpAvgFrameSizeThis attribute indicates the average frame size that is used in the
traffic parameter conversion policy calculations for this end point.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.122.14.3.11.1.13 |
mscMcsMgrFrf5EpGEpTrafficParmConversionPolicyThis attribute indicates the traffic parameter conversion policy used
to specify the equivalent ATM bandwidth rate at this end point.
Policy 3 characterizes the traffic in the following way:
- ATM traffic descriptor type 6 is selected
- PCR0+1 is based on the AR
- SCR0+1 is based on the CIR and EIR
- MBS0+1 is based on Bc,Be,CIR,EIR and AR
- Takes into account that the instananeous rate of the frame relay
stream can burst above CIR and up tp the AR.
Policy 4 characterizes the traffic in the following way:
- ATM traffic descriptor type 7 or 8 is selected. Type 7 is chosen
when non-conforming cells are to be discarded and type 8 when
non-conforming cells are tagged by UPC traffic policer.
- PCR0+1 is based on the AR
- SCR0 is based on the CIR
- MBS0 is based on Bc,CIR and AR
- There is no direct characterization of EIR. The allowed EIR can be
derived using the difference between the AR and CIR.
Policy 5 characterizes the traffic in the following way:
- ATM traffic descriptor type 7 or 8 is selected . Type 7 is chosen
when non-conforming cells are to be discarded and type 8 when
non-conforming cells are tagged by UPC traffic policer
- PCR0+1 is based on CIR and EIR
- SCR0 is based on the CIR
- MBS0 is based on the Bc,CIR and AR
- The maximum PCR is no longer based on AR but based on the
CIR and EIR.
Policy 6 characterizes the traffic in the following way:
- ATM traffic descriptor type 3 is selected
- PCR0+1 is based only on CIR.ro Enumeration .1.3.6.1.4.1.562.36.2.1.122.14.3.11.1.14 |
mscMcsMgrFrf5EpGEpTypeThis attribute indicates the FRF.5 End Point type. If the value is
master, this End Point is responsible for initiating the call to set up
the FRF.5 ATM VCC. If the value is slave, this End Point receives
call setup requests from the remote end.ro Enumeration .1.3.6.1.4.1.562.36.2.1.122.14.3.11.1.15 |
mscMcsMgrFrf5EpGEpLastVccCauseDiagThis attribute indicates the diagnostic value of the last SPVC release
message received on the FRF.5 end point Vcc pipe.ro HexString .1.3.6.1.4.1.562.36.2.1.122.14.3.11.1.20 |
frf5EpMIB OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.121 |
IMPORTS Unknown .1.3.6.1.4.1.562.36.2.2.121 |
frf5EpGroup OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.121.1 |
frf5EpGroupCA OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.121.1.1 |
frf5EpGroupCA02 OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.121.1.1.3 |
frf5EpGroupCA02A OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.121.1.1.3.2 |
frf5EpCapabilities OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.121.3 |
frf5EpCapabilitiesCA OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.121.3.1 |
frf5EpCapabilitiesCA02 OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.121.3.1.3 |
frf5EpCapabilitiesCA02A OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.121.3.1.3.2 |