Nortel-MsCarrier-MscPassport-FrameRelayUniMIB
AI MIB Summary
Standard SNMP MIB module defining data structures for Nortel-MsCarrier-MscPassport-FrameRelayUniMIB.
733
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
733 total| Object Name |
|---|
mscFrUni OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.71 |
mscFrUniRowStatusTableThis entry controls the addition and deletion of
mscFrUni components. SEQUENCE OF MscFrUniRowStatusEntry .1.3.6.1.4.1.562.36.2.1.71.1 |
mscFrUniRowStatusEntryA single entry in the table represents a single
mscFrUni component. MscFrUniRowStatusEntry .1.3.6.1.4.1.562.36.2.1.71.1.1 |
mscFrUniRowStatusThis variable is used as the basis for SNMP naming of
mscFrUni components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.71.1.1.1 |
mscFrUniComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.71.1.1.2 |
mscFrUniStorageTypeThis variable represents the storage type value for the
mscFrUni tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.71.1.1.4 |
mscFrUniIndexThis variable represents the index for the mscFrUni tables. Integer32 .1.3.6.1.4.1.562.36.2.1.71.1.1.10 |
mscFrUniDna OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.71.2 |
mscFrUniDnaRowStatusTableThis entry controls the addition and deletion of
mscFrUniDna components. SEQUENCE OF MscFrUniDnaRowStatusEntry .1.3.6.1.4.1.562.36.2.1.71.2.1 |
mscFrUniDnaRowStatusEntryA single entry in the table represents a single
mscFrUniDna component. MscFrUniDnaRowStatusEntry .1.3.6.1.4.1.562.36.2.1.71.2.1.1 |
mscFrUniDnaRowStatusThis variable is used as the basis for SNMP naming of
mscFrUniDna components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.71.2.1.1.1 |
mscFrUniDnaComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.71.2.1.1.2 |
mscFrUniDnaStorageTypeThis variable represents the storage type value for the
mscFrUniDna tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.71.2.1.1.4 |
mscFrUniDnaIndexThis variable represents the index for the mscFrUniDna tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.71.2.1.1.10 |
mscFrUniDnaCug OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.71.2.2 |
mscFrUniDnaCugRowStatusTableThis entry controls the addition and deletion of
mscFrUniDnaCug components. SEQUENCE OF MscFrUniDnaCugRowStatusEntry .1.3.6.1.4.1.562.36.2.1.71.2.2.1 |
mscFrUniDnaCugRowStatusEntryA single entry in the table represents a single
mscFrUniDnaCug component. MscFrUniDnaCugRowStatusEntry .1.3.6.1.4.1.562.36.2.1.71.2.2.1.1 |
mscFrUniDnaCugRowStatusThis variable is used as the basis for SNMP naming of
mscFrUniDnaCug components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.71.2.2.1.1.1 |
mscFrUniDnaCugComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.71.2.2.1.1.2 |
mscFrUniDnaCugStorageTypeThis variable represents the storage type value for the
mscFrUniDnaCug tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.71.2.2.1.1.4 |
mscFrUniDnaCugIndexThis variable represents the index for the mscFrUniDnaCug tables. Integer32 .1.3.6.1.4.1.562.36.2.1.71.2.2.1.1.10 |
mscFrUniDnaCugCugOptionsTableAttributes in this group define ClosedUserGroup options associated
with interlockCode. DNA's with the same CUG (interlockCode) can
make calls within this group. Various combinations which permit or
prevent calls in the same CUG group are defined here. SEQUENCE OF MscFrUniDnaCugCugOptionsEntry .1.3.6.1.4.1.562.36.2.1.71.2.2.10 |
mscFrUniDnaCugCugOptionsEntryAn entry in the mscFrUniDnaCugCugOptionsTable. MscFrUniDnaCugCugOptionsEntry .1.3.6.1.4.1.562.36.2.1.71.2.2.10.1 |
mscFrUniDnaCugTypeThis attribute specifies the CUG type - the CUG is either a national
CUG, or an international CUG. International closed user groups are
usually established between DTEs for which there is an X.75
Gateway between; whereas national closed user groups are usually
established between DTEs for which there is no X.75 Gateway
between. (National CUGs cannot normally traverse an X.75
Gateway).
If this attribute is set to national, then the CUG is a national CUG,
in which case, the dnic should be left at its default value since it is
not part of a national CUG. If this attribute is set to international,
then the CUG is an international CUG, in which case, the dnic
should be set appropriately as part of the CUG interlockCode.rw Enumeration .1.3.6.1.4.1.562.36.2.1.71.2.2.10.1.1 |
mscFrUniDnaCugDnicThis attribute specifies the dnic (Data Network ID Code) of the
CUG by which packet networks are identified. This attribute is not
applicable if the CUG is a national CUG, as specified by the CUG
type attribute. There are usually 1 or 2 dnics assigned per country,
for public networks. The U.S. is an exception where each BOC has
a dnic. Also, a group of private networks can have its own dnic.
dnic value is not an arbitrary number. It is assigned by international
agreement and controlled by CCITT.rw DigitString .1.3.6.1.4.1.562.36.2.1.71.2.2.10.1.2 |
mscFrUniDnaCugInterlockCodeThis attribute specifies the CUG identifier of a national or
international CUG call. It is an arbitrary number and it also can be
called CUG in some descriptions. Interfaces (DNA's) defined with
this number can make calls to DNA's with the same interlockCode.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.2.2.10.1.3 |
mscFrUniDnaCugPreferentialThe attribute 'preferential', if set to yes indicates that this CUG is
the SIMPLE CUG (as defined in ITU X.36 [10/96]), in which case
it will be used during the call establishment phase if the DTE has
not explicitly specified a CUG index in the call request packet. If set
to no, then this CUG is not the SIMPLE CUG, but an instance of
the SELECTABLE CUG.
The attribute 'preferential' is set to no by CAS when a CUG
instance is created. If only one CUG instance exists under a DNA,
and if this CUG's attributes 'incCalls' and 'outCall' are both set to
allowed, then this CUG instance can be changed to a SIMPLE CUG
by setting the attribute 'preferential' to yes. If more than one CUG
instances exist under a DNA, none of the CUGs can be set by the
user as 'preferential'. Essentially, the attribute 'preferential'
distinguishes a SIMPLE CUG from a SELECTABLE CUG.
In the case of a FRUNI DNA with a single CUG instance, the CUG
can be a SIMPLE CUG (preferential = yes) or the only instance of a
SELECTABLE CUG (preferential = no).rw Enumeration .1.3.6.1.4.1.562.36.2.1.71.2.2.10.1.4 |
mscFrUniDnaCugOutCallsThis attribute, if set to allowed indicates that outgoing calls (from
the DTE into the network) can be made using this particular CUG.
If set to a value of disallowed, then outgoing calls cannot be made
using this CUG - such calls will be cleared by the local DCE.
This attribute corresponds to the CCITT 'Outgoing Calls Barred'
feature for CUGs in that outgoing calls are barred if this attribute is
set to a value of disallowed.rw Enumeration .1.3.6.1.4.1.562.36.2.1.71.2.2.10.1.5 |
mscFrUniDnaCugIncCallsThis attribute, if set to allowed indicates that incoming calls (from
the network to the DTE) can be made using this particular CUG. If
set to disallowed, then incoming calls cannot be made using this
CUG - such calls will be cleared by the local DCE.
This attribute corresponds to the CCITT 'Incoming Calls Barred'
feature for CUGs in that incoming calls are barred if this attribute is
set to a value of disallowed.rw Enumeration .1.3.6.1.4.1.562.36.2.1.71.2.2.10.1.6 |
mscFrUniDnaHgM OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.71.2.3 |
mscFrUniDnaHgMRowStatusTableThis entry controls the addition and deletion of
mscFrUniDnaHgM components. SEQUENCE OF MscFrUniDnaHgMRowStatusEntry .1.3.6.1.4.1.562.36.2.1.71.2.3.1 |
mscFrUniDnaHgMRowStatusEntryA single entry in the table represents a single
mscFrUniDnaHgM component. MscFrUniDnaHgMRowStatusEntry .1.3.6.1.4.1.562.36.2.1.71.2.3.1.1 |
mscFrUniDnaHgMRowStatusThis variable is used as the basis for SNMP naming of
mscFrUniDnaHgM components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.71.2.3.1.1.1 |
mscFrUniDnaHgMComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.71.2.3.1.1.2 |
mscFrUniDnaHgMStorageTypeThis variable represents the storage type value for the
mscFrUniDnaHgM tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.71.2.3.1.1.4 |
mscFrUniDnaHgMIndexThis variable represents the index for the mscFrUniDnaHgM tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.71.2.3.1.1.10 |
mscFrUniDnaHgMHgAddr OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.71.2.3.2 |
mscFrUniDnaHgMHgAddrRowStatusTableThis entry controls the addition and deletion of
mscFrUniDnaHgMHgAddr components. SEQUENCE OF MscFrUniDnaHgMHgAddrRowStatusEntry .1.3.6.1.4.1.562.36.2.1.71.2.3.2.1 |
mscFrUniDnaHgMHgAddrRowStatusEntryA single entry in the table represents a single
mscFrUniDnaHgMHgAddr component. MscFrUniDnaHgMHgAddrRowStatusEntry .1.3.6.1.4.1.562.36.2.1.71.2.3.2.1.1 |
mscFrUniDnaHgMHgAddrRowStatusThis variable is used as the basis for SNMP naming of
mscFrUniDnaHgMHgAddr components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.71.2.3.2.1.1.1 |
mscFrUniDnaHgMHgAddrComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.71.2.3.2.1.1.2 |
mscFrUniDnaHgMHgAddrStorageTypeThis variable represents the storage type value for the
mscFrUniDnaHgMHgAddr tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.71.2.3.2.1.1.4 |
mscFrUniDnaHgMHgAddrIndexThis variable represents the index for the mscFrUniDnaHgMHgAddr tables. Integer32 .1.3.6.1.4.1.562.36.2.1.71.2.3.2.1.1.10 |
mscFrUniDnaHgMHgAddrAddrTableThis group contains attributes common to all DNAs. Every DNA
used in the network is defined with this group of 2 attributes. SEQUENCE OF MscFrUniDnaHgMHgAddrAddrEntry .1.3.6.1.4.1.562.36.2.1.71.2.3.2.10 |
mscFrUniDnaHgMHgAddrAddrEntryAn entry in the mscFrUniDnaHgMHgAddrAddrTable. MscFrUniDnaHgMHgAddrAddrEntry .1.3.6.1.4.1.562.36.2.1.71.2.3.2.10.1 |
mscFrUniDnaHgMHgAddrNumberingPlanIndicatorThis attribute indicates the Numbering Plan Indicator (NPI) of the
DNA. The address may belong to X.121 or E.164 plans.rw Enumeration .1.3.6.1.4.1.562.36.2.1.71.2.3.2.10.1.1 |
mscFrUniDnaHgMHgAddrDataNetworkAddressThis attribute contains digits which form the unique identifier of the
customer interface. It can be compared (approximation only) to a
telephone number where the phone number identifies a unique
telephone set. DNA digits are selected and assigned by network
operators.rw DigitString .1.3.6.1.4.1.562.36.2.1.71.2.3.2.10.1.2 |
mscFrUniDnaHgMIfTableThis group contains the interface parameters between the
HuntGroupMember and the hunt group server. SEQUENCE OF MscFrUniDnaHgMIfEntry .1.3.6.1.4.1.562.36.2.1.71.2.3.10 |
mscFrUniDnaHgMIfEntryAn entry in the mscFrUniDnaHgMIfTable. MscFrUniDnaHgMIfEntry .1.3.6.1.4.1.562.36.2.1.71.2.3.10.1 |
mscFrUniDnaHgMAvailabilityUpdateThresholdThis attribute specifies how much availableAggregateCIR can
change before an Availability Message Packet (AMP) is sent to the
hunt group server informing it of the change.
If the value specified is not a multiple of 2048, the value actually
used as the threshold will be the next higher multiple of 2048.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.2.3.10.1.1 |
mscFrUniDnaHgMOpTableThis group contains the operational attributes of the
HuntGroupMember component. SEQUENCE OF MscFrUniDnaHgMOpEntry .1.3.6.1.4.1.562.36.2.1.71.2.3.11 |
mscFrUniDnaHgMOpEntryAn entry in the mscFrUniDnaHgMOpTable. MscFrUniDnaHgMOpEntry .1.3.6.1.4.1.562.36.2.1.71.2.3.11.1 |
mscFrUniDnaHgMMaximumAvailableAggregateCirThis attribute indicates the maximum available bandwidth for this
hunt group member. This value represents the total sum of the
sixteen egress bandwidth pools. It is the sum of the sixteen indices
of the FrUni Ca egressBandwidthPool attribute multiplied by the
link speed.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.2.3.11.1.1 |
mscFrUniDnaHgMAvailableAggregateCirThis attribute indicates the current total available bandwidth
reported to the hunt group server in the Availability Message Packet
(AMP). This value represents the sum of the sixteen currently
available egress bandwidth pools. It is the sum of the sixteen indices
of the FrUni Ca egressPoolAvailableBandwidth attribute.
It increments when a connection is released.
It decrements when a connection is accepted.
Both this attribute and the availableDlcis attribute must be non zero
for this interface to receive calls on a hunt group.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.2.3.11.1.2 |
mscFrUniDnaHgMAvailabilityDeltaThis attribute indicates the net change in the available aggregate
CIR since the last Availability Message Packet (AMP) was sent to
the Hunt Group. Once the absolute value of this attribute reaches
the availabilityUpdateThreshold an AMP is sent to the hunt group
server(s) and the availabilityDelta is re-computed.ro INTEGER (-16777216..16777215) .1.3.6.1.4.1.562.36.2.1.71.2.3.11.1.3 |
mscFrUniDnaHgMAvailableDlcisThis attribute indicates the number of DLCIs available for SVCs on
the interface associated with this DNA. If this value reaches 0, an
AMP with zero availability is sent to the hunt group server(s).
Both this attribute and the availableAggregateCir attribute must be
non zero for this DNA to receive calls on the hunt group.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.2.3.11.1.5 |
mscFrUniDnaAddressTableThis group contains attributes common to all DNAs. Every DNA
used in the network is defined with this group of 2 attributes. SEQUENCE OF MscFrUniDnaAddressEntry .1.3.6.1.4.1.562.36.2.1.71.2.10 |
mscFrUniDnaAddressEntryAn entry in the mscFrUniDnaAddressTable. MscFrUniDnaAddressEntry .1.3.6.1.4.1.562.36.2.1.71.2.10.1 |
mscFrUniDnaNumberingPlanIndicatorThis attribute indicates the Numbering Plan Indicator (NPI) of the
DNA that is entered. Address may belong to X.121 or E.164 plans.
X.121 is used in packet switched data networks.rw Enumeration .1.3.6.1.4.1.562.36.2.1.71.2.10.1.1 |
mscFrUniDnaDataNetworkAddressThis attribute indicates the customer's unique identifier. It is the
equivalent of the telephone number in the telephone network.rw DigitString .1.3.6.1.4.1.562.36.2.1.71.2.10.1.2 |
mscFrUniDnaOutgoingOptionsTableThis group defines DNA call options for calls made from the
interface. These options are not used for calls arriving to the
interface represented by this DNA. SEQUENCE OF MscFrUniDnaOutgoingOptionsEntry .1.3.6.1.4.1.562.36.2.1.71.2.11 |
mscFrUniDnaOutgoingOptionsEntryAn entry in the mscFrUniDnaOutgoingOptionsTable. MscFrUniDnaOutgoingOptionsEntry .1.3.6.1.4.1.562.36.2.1.71.2.11.1 |
mscFrUniDnaOutDefaultPriorityThis attribute indicates the default priority of outgoing calls from
the DTE to the network.
It can be overridden by the discardPriority under DLCI Direct Call
subcomponent.
This option can be also included in X.25 signalling, in such case it
will be overruled.rw Enumeration .1.3.6.1.4.1.562.36.2.1.71.2.11.1.7 |
mscFrUniDnaOutDefaultPathSensitivityThis attribute specifies the default class of path sensitivity to
network for all outgoing calls that use this DNA. The chosen default
class of path sensitivity applies to all outgoing calls established
using this DNA.
This attribute, if set to throughput, indicates that the default class is
throughput sensitive. If set to delay, then the default class is delay
sensitive. The default of outDefaultPathSensitivity is throughput.rwobsolete Enumeration .1.3.6.1.4.1.562.36.2.1.71.2.11.1.11 |
mscFrUniDnaOutPathSensitivityOverRideIf this attribute is set to yes in the call request, the called end will
use the calling end provisioning data on path sensitivity to override
its own provisioning data.
The default of outPathSensitivityOverRide is yes.rwobsolete Enumeration .1.3.6.1.4.1.562.36.2.1.71.2.11.1.12 |
mscFrUniDnaOutDefaultPathReliabilityThis attribute specifies the default class of routing for reliability
routing for all outgoing calls (from the DTE to the network) using
this particular DNA. The chosen default class of routing applies to
all outgoing calls established using this DNA, and applies to the
packets travelling in both directions on all outgoing calls (local to
remote, and remote to local). For incoming calls, the default class of
routing is chosen by the calling party (as opposed to DPN, where
either end of the call can choose the default routing class).
This attribute, if set to a value of normal, indicates that the default
class of routing is normal reliability routing. If set to a value of
high, then the default class of routing is high reliability routing.
High reliability is the standard choice for most DPN and Passport
services. It usually indicates that packets are overflowed or
retransmitted at various routing levels. Typically high reliability
results in duplication and disordering of packets in the network
when errors are detected or during link congestion. However, the
VC handles the duplication and disordering to ensure that packets
are delivered to the DTE properly.
For the Frame Relay service, duplication of packets is not desired,
in which case, normal reliability may be chosen as the preferred
class of routing.rw Enumeration .1.3.6.1.4.1.562.36.2.1.71.2.11.1.14 |
mscFrUniDnaOutAccessThis attribute is an extension of the Closed User Group (CUG)
facility, as follows:
This attribute, if set to a value of allowed indicates that outgoing
calls (from the DTE to the network) to the open (non-CUG) part of
the network are permitted. It also permits outgoing calls to DTEs
that have Incoming Access capabilities. If set to a value of
disallowed, then such calls cannot be made using this DNA. Such
calls will be cleared by the local DCE.
This attribute corresponds to the CCITT 'Closed User Group with
Outgoing Access' feature for DNAs in that outgoing access is
granted if this attribute is set to a value of allowed.rw Enumeration .1.3.6.1.4.1.562.36.2.1.71.2.11.1.17 |
mscFrUniDnaDefaultTransferPriorityThis attribute specifies the default transfer priority for all outgoing
calls using this particular DNA. It can be overridden by the
transferPriority provisioned in the Dlci DirectCall sub-component.
The transfer priority is a preference configured for an application
according to its delay-sensitivity requirement. Frames with higher
transfer priority are served by the network before the frames with
lower priority. The transfer priority standard is defined to have 16
levels from 0 to 15.
Each transfer priority n, where n indicates the transfer priority
index, contains a default setting for routing class of service
(multimedia, delay or throughput) and frame relay egress queue
(depending on the number of supported egress queues on the remote
end interface) specified by the routingClassOfService and
emissionPriority attributes provisioned in the Mod Frs DprsNet
Tpm/n component. The default mapping can be altered by a user if
required.
The default defaultTransferPriority is 0.rw Enumeration .1.3.6.1.4.1.562.36.2.1.71.2.11.1.18 |
mscFrUniDnaTransferPriorityOverRideWhen this attribute is set to yes in the call request, the called end
will use the calling end provisioning data on transfer priority to
override its own provisioning data. If it is set no, the called end
will use its own provisioning data on transfer priority.
This attribute is not applicable for Frame Relay SVCs.
For more information about transfer priority, please refer to the
previous attribute defaultTransferPriority.
The default of transferPriorityOverRide is yes.rw Enumeration .1.3.6.1.4.1.562.36.2.1.71.2.11.1.19 |
mscFrUniDnaIncomingOptionsTableThis group defines options for incoming calls. These options are
used for calls arriving to the interface represented by this DNA. For
calls originated from the interface, IncomingOptions attributes are
not used. SEQUENCE OF MscFrUniDnaIncomingOptionsEntry .1.3.6.1.4.1.562.36.2.1.71.2.12 |
mscFrUniDnaIncomingOptionsEntryAn entry in the mscFrUniDnaIncomingOptionsTable. MscFrUniDnaIncomingOptionsEntry .1.3.6.1.4.1.562.36.2.1.71.2.12.1 |
mscFrUniDnaIncAccessThis attribute, if set to a value of allowed specifies that incoming
calls (from the network to the DTE) from the open (non-CUG) part
of the network are permitted. It also permits incoming calls from
DTEs that have outgoing access capabilities. If set to a value of
disallowed, such calls cannot be made to this DNA. They will be
cleared by the local DCE.
This attribute corresponds to the CCITT 'Closed User Group with
Incoming Access' feature for DNAs in that incoming access is
granted if this attribute is set to a value of allowed.rw Enumeration .1.3.6.1.4.1.562.36.2.1.71.2.12.1.9 |
mscFrUniDnaCallOptionsTableThis group defines additional all options for not related to direction
of the call. SEQUENCE OF MscFrUniDnaCallOptionsEntry .1.3.6.1.4.1.562.36.2.1.71.2.13 |
mscFrUniDnaCallOptionsEntryAn entry in the mscFrUniDnaCallOptionsTable. MscFrUniDnaCallOptionsEntry .1.3.6.1.4.1.562.36.2.1.71.2.13.1 |
mscFrUniDnaAccountClassThis attribute specifies the accounting class which is reserved for
network operations usage. Its value is returned in the accounting
record in the local and remote service type attributes. Use of this
attribute is decided by network operator.
This attribute is returned by the local VC in the accounting record
for all calls that are set up using this particular DNA.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.2.13.1.10 |
mscFrUniDnaAccountCollectionThis attribute indicates that accounting records are to be collected
by the network for the various reasons: billing, test, study, auditing.
The last of the parameters, force, indicates that accounting records
are to be collected irrespective of other collection reasons. The
force option is available for X.75 Gateways only. If none of these
reasons are set, then accounting will be suppressed.
To set a specific accounting collection reason, the reason is entered
and the corresponding bit in the structure is set to a value of 1. To
turn off a specific accounting collection reason, the reason is
entered preceded with the '~' character, and the corresponding bit in
the structure is set to a value of 0.
The bit placement for the accounting collection reasons is as
follows:
Bit 0 - Bill
Bit 1 - Test
Bit 2 - Study
Bit 3 - Audit
Bit 4 - Force
Description of bits:
bill(0)
test(1)
study(2)
audit(3)
force(4)rw OCTET STRING .1.3.6.1.4.1.562.36.2.1.71.2.13.1.11 |
mscFrUniDnaServiceExchangeThis attribute is an arbitrary number, Data Service Exchange, as
entered by the network operator and reported in accounting record.
It is converted into an internal 8-bit integer value for use in the
accounting record as well as in various X.25 and X.75 Tariff
utilities.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.2.13.1.12 |
mscFrUniDnaEgressAccountingThis attribute specifies if egress accounting is enabled by the frame
relay service. If egress accounting is disabled, only segment counts
are collected by the VC. No frame relay counts appear in the
accounting records for the frame relay service. If egress accounting
is enabled, the accounting records for the frame relay service will
contain frame relay specific counts.rw Enumeration .1.3.6.1.4.1.562.36.2.1.71.2.13.1.13 |
mscFrUniDnaDataPathThis attribute specifies the data path to be used by Virtual Circuits
on this interface. If the connection has a DirectCall component then
the value can be overridden by the dataPath attribute of the
DirectCall component.
This value applies to the connection after data transfer state is
reached. All the data and control trafic will be sent using this data
path. If the provisioned dataPath is not available the connection is
not established.
The value of the dataPath is signalled by both ends of the
connection. If this value is not the same at both ends dprsOnly is
used for the duration of the connection.
A virtual circuit connection is always established using dprsOnly
even if this attribute is provisioned as some other value.
dprsOnly - dynamic packet routing system is used
dprsMcsOnly - dprs Multi-Service Cut-Through Switching path is
used.
dprsMcsFirst - dprs Multi-Service Cut-Through Switching path is
used if it is available. If it is not avaliable dprsOnly is used.rw Enumeration .1.3.6.1.4.1.562.36.2.1.71.2.13.1.21 |
mscFrUniFramer OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.71.3 |
mscFrUniFramerRowStatusTableThis entry controls the addition and deletion of
mscFrUniFramer components. SEQUENCE OF MscFrUniFramerRowStatusEntry .1.3.6.1.4.1.562.36.2.1.71.3.1 |
mscFrUniFramerRowStatusEntryA single entry in the table represents a single
mscFrUniFramer component. MscFrUniFramerRowStatusEntry .1.3.6.1.4.1.562.36.2.1.71.3.1.1 |
mscFrUniFramerRowStatusThis variable is used as the basis for SNMP naming of
mscFrUniFramer components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.71.3.1.1.1 |
mscFrUniFramerComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.71.3.1.1.2 |
mscFrUniFramerStorageTypeThis variable represents the storage type value for the
mscFrUniFramer tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.71.3.1.1.4 |
mscFrUniFramerIndexThis variable represents the index for the mscFrUniFramer tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.71.3.1.1.10 |
mscFrUniFramerProvTableThis group contains the base provisioning data for the Framer
component. Application or hardware interface specific provisioning
data is contained in other provisionable Framer groups. SEQUENCE OF MscFrUniFramerProvEntry .1.3.6.1.4.1.562.36.2.1.71.3.10 |
mscFrUniFramerProvEntryAn entry in the mscFrUniFramerProvTable. MscFrUniFramerProvEntry .1.3.6.1.4.1.562.36.2.1.71.3.10.1 |
mscFrUniFramerInterfaceNameThis attribute contains a hardware component name.
The attribute associates the application with a specific link. This
defines the module processor on which Framer's parent component
(as well as Framer itself) will run.rw Link .1.3.6.1.4.1.562.36.2.1.71.3.10.1.1 |
mscFrUniFramerLinkTableThis group contains attributes defining the framing of data on the
link interface. SEQUENCE OF MscFrUniFramerLinkEntry .1.3.6.1.4.1.562.36.2.1.71.3.11 |
mscFrUniFramerLinkEntryAn entry in the mscFrUniFramerLinkTable. MscFrUniFramerLinkEntry .1.3.6.1.4.1.562.36.2.1.71.3.11.1 |
mscFrUniFramerDataInversionThis attribute determines whether data bits are to be inverted (1 to 0
and 0 to 1) before transmission of frames to the interface. If the
value of this attribute is On, the incoming data bits will also be
inverted when frames are received from the link before being
processed.
This option is typically used in hdlc framing mode when inversion
is used to guarantee 1's density.
Note that aborts (in hdlc and interrupting modes) are corrupted
when data is inverted.
This attribute may only take its default value for non-MSA cards.rw Enumeration .1.3.6.1.4.1.562.36.2.1.71.3.11.1.2 |
mscFrUniFramerFrameCrcTypeThis attribute defines the type of CRC used.
The CRC value calculated is appended to the end of the frames
transmitted to the link. The CRC value is removed from the end of
frames received from the link and checked for correctness.
NoCrc means that CRC is not used.
This attribute may take only its default value for non-MSA cards.rw Enumeration .1.3.6.1.4.1.562.36.2.1.71.3.11.1.3 |
mscFrUniFramerFlagsBetweenFramesThis attribute defines the number of flags that are inserted between
frames sent to the link interface.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.3.11.1.4 |
mscFrUniFramerStateTableThis group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. SEQUENCE OF MscFrUniFramerStateEntry .1.3.6.1.4.1.562.36.2.1.71.3.12 |
mscFrUniFramerStateEntryAn entry in the mscFrUniFramerStateTable. MscFrUniFramerStateEntry .1.3.6.1.4.1.562.36.2.1.71.3.12.1 |
mscFrUniFramerAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.71.3.12.1.1 |
mscFrUniFramerOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.ro Enumeration .1.3.6.1.4.1.562.36.2.1.71.3.12.1.2 |
mscFrUniFramerUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.ro Enumeration .1.3.6.1.4.1.562.36.2.1.71.3.12.1.3 |
mscFrUniFramerStatsTableThis group contains the operational statistics data for a Framer
component. SEQUENCE OF MscFrUniFramerStatsEntry .1.3.6.1.4.1.562.36.2.1.71.3.13 |
mscFrUniFramerStatsEntryAn entry in the mscFrUniFramerStatsTable. MscFrUniFramerStatsEntry .1.3.6.1.4.1.562.36.2.1.71.3.13.1 |
mscFrUniFramerFrmToIfThe number of frames transmitted to the link interface by Framer.
Note: This does not include the number of frames transmitted
directly to the hardware queue, thus bypassing the Framer
component.roobsolete Counter32 .1.3.6.1.4.1.562.36.2.1.71.3.13.1.1 |
mscFrUniFramerFrmFromIfThe number of frames received from the link interface by Framer.roobsolete Counter32 .1.3.6.1.4.1.562.36.2.1.71.3.13.1.2 |
mscFrUniFramerOctetFromIfThe number of bytes received from the link interface by Framer.roobsolete Counter32 .1.3.6.1.4.1.562.36.2.1.71.3.13.1.3 |
mscFrUniFramerAbortsThis attribute is the total number of aborts received.ro Counter32 .1.3.6.1.4.1.562.36.2.1.71.3.13.1.4 |
mscFrUniFramerCrcErrorsThis attribute is the total number of frames with CRC errors,
occurring in the receive direction from the link.ro Counter32 .1.3.6.1.4.1.562.36.2.1.71.3.13.1.5 |
mscFrUniFramerLrcErrorsThis attribute is the total number of frames with LRC errors,
occurring in the Tx link prior to transmission onto the link.ro Counter32 .1.3.6.1.4.1.562.36.2.1.71.3.13.1.6 |
mscFrUniFramerNonOctetErrorsThis attribute is the total number of frames that were non octet
aligned.ro Counter32 .1.3.6.1.4.1.562.36.2.1.71.3.13.1.7 |
mscFrUniFramerOverrunsThis attribute is the total number of frames received from the link
for which overruns occurred.ro Counter32 .1.3.6.1.4.1.562.36.2.1.71.3.13.1.8 |
mscFrUniFramerUnderrunsThis attribute is the total number of frames transmitted to the link
for which underruns occurred.ro Counter32 .1.3.6.1.4.1.562.36.2.1.71.3.13.1.9 |
mscFrUniFramerLargeFrmErrorsThis attribute is the total number of frames received which were too
large. The frame execeeded the maximumFrameLengthLimit
provisioned attribute or it contained more than the 255 block
hardware limit.ro Counter32 .1.3.6.1.4.1.562.36.2.1.71.3.13.1.10 |
mscFrUniFramerFrmModeErrorsThis attribute is the total number of frames detected with framing
mode errors. A framingModeError is flagged when frames are
inconsistent with the specified framingType, that is when
interrupting frames are used while running in hdlc mode.ro Counter32 .1.3.6.1.4.1.562.36.2.1.71.3.13.1.11 |
mscFrUniFramerFrmToIf64The number of frames transmitted to the link interface by Framer.
Note: This does not include the number of frames transmitted
directly to the hardware queue, thus bypassing the Framer
component.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.71.3.13.1.14 |
mscFrUniFramerFrmFromIf64The number of frames received from the link interface by Framer.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.71.3.13.1.15 |
mscFrUniFramerOctetFromIf64The number of bytes received from the link interface by Framer.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.71.3.13.1.16 |
mscFrUniFramerUtilTableThis group contains the link utilizaiton operational data for a
Framer component. SEQUENCE OF MscFrUniFramerUtilEntry .1.3.6.1.4.1.562.36.2.1.71.3.14 |
mscFrUniFramerUtilEntryAn entry in the mscFrUniFramerUtilTable. MscFrUniFramerUtilEntry .1.3.6.1.4.1.562.36.2.1.71.3.14.1 |
mscFrUniFramerNormPrioLinkUtilToIfThis attribute is the utilization of the normal and high priority data
traffic (interruptable traffic) sent to the link as a percentage of the
available bandwidth on the link. Note that this indluces traffic with
Transfer Priorities (TP) of 0, 6 and 9 and/or Emission Priority of 2
and 3. The utilization is the average for the last minute.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.71.3.14.1.1 |
mscFrUniFramerNormPrioLinkUtilFromIfThis attribute is the utilization of the normal and high priority data
traffic (interruptable traffic) received from the link as a percentage
of the available bandwidth on the link. Note that this includes traffic
with Transfer Priorities (TP) of 0, 6 and 9 and/or Emission Priority
of 2 and 3. The utilization is the average for the last minute.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.71.3.14.1.3 |
mscFrUniLmi OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.71.4 |
mscFrUniLmiRowStatusTableThis entry controls the addition and deletion of
mscFrUniLmi components. SEQUENCE OF MscFrUniLmiRowStatusEntry .1.3.6.1.4.1.562.36.2.1.71.4.1 |
mscFrUniLmiRowStatusEntryA single entry in the table represents a single
mscFrUniLmi component. MscFrUniLmiRowStatusEntry .1.3.6.1.4.1.562.36.2.1.71.4.1.1 |
mscFrUniLmiRowStatusThis variable is used as the basis for SNMP naming of
mscFrUniLmi components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.71.4.1.1.1 |
mscFrUniLmiComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.71.4.1.1.2 |
mscFrUniLmiStorageTypeThis variable represents the storage type value for the
mscFrUniLmi tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.71.4.1.1.4 |
mscFrUniLmiIndexThis variable represents the index for the mscFrUniLmi tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.71.4.1.1.10 |
mscFrUniLmiParmsTableThis group contains the provisionable attributes of the LMI
component. SEQUENCE OF MscFrUniLmiParmsEntry .1.3.6.1.4.1.562.36.2.1.71.4.10 |
mscFrUniLmiParmsEntryAn entry in the mscFrUniLmiParmsTable. MscFrUniLmiParmsEntry .1.3.6.1.4.1.562.36.2.1.71.4.10.1 |
mscFrUniLmiProceduresThis attribute selects the procedures to be used for the Local
Management Interface. The following procedures are supported:
none: no Local Management Interface procedures are running on
this interface. This accommodates Frame Relay user equipment that
has not implemented any LMI procedures. The remaining attributes
of this group are ignored.
vendorForum: Local Management Interface procedures from the
Vendor Forum specification are supported on this interface. DLCI
1023 is used for the LMI protocol. This value cannot be used if the
side attribute is both.
ansi: Local Management Interface procedures from the ANSI
specification are supported. DLCI 0 is used for the LMI protocol.
itu: Local Management Interface procedures from the ITU-T
specification are supported. DLCI 0 is used for the LMI protocol.
Was previously ccitt.
autoConfigure: The interface determines automatically which
Local Management Interface procedures to use. This value cannot
be used if the side attribute is user.
The procedures currently in use can be seen in the operational
attribute opProcedures.rw Enumeration .1.3.6.1.4.1.562.36.2.1.71.4.10.1.1 |
mscFrUniLmiAsyncStatusReportThis attribute selects the use of asynchronous PVC status report
procedures as specified in ANSI, CCITT, and Vendor Forum.
This attribute can be set to on or off. If procedures is set to none,
this attribute is ignored.rw Enumeration .1.3.6.1.4.1.562.36.2.1.71.4.10.1.2 |
mscFrUniLmiErrorEventThresholdAn event is defined as follows: (1) receipt of a STATUS ENQUIRY
message; or (2) expiration of timer T392. An error event is (1)
nonreceipt of STATUS ENQUIRY in T392 seconds; (2) invalid
contents of a LMI message; (3) invalid receive sequence number.
This attribute specifies the number of error events which, if they
occur within eventCount events, cause a protocol error condition.
The condition is cleared after eventCount sequential correct events
occur. This attribute corresponds to the nN2 parameter described in
the Vendor Forum Specification.
It must be less than or equal to eventCount.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.4.10.1.3 |
mscFrUniLmiEventCountThis attribute specifies the number of contiguous events within
which no more than eventErrorThreshold error events are allowed.
This attribute corresponds to the nN3 parameter described in the
Vendor Forum Specification.
It must be greater than or equal to errorEventThreshold.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.4.10.1.4 |
mscFrUniLmiCheckPointTimerThis attribute selects the time (in seconds) within which a STATUS
ENQUIRY message is expected. This attribute corresponds to the
nT2 parameter described in the Vendor Forum Specification.
It must be less than messageCountTimer.rw Unsigned32 (5 | 10 | 15 | 20 | 25 | 30) .1.3.6.1.4.1.562.36.2.1.71.4.10.1.5 |
mscFrUniLmiMessageCountTimerThis attribute selects the time (in seconds) within which at most five
(this is a fixed value and corresponds to maximum message count in
VendorForum) STATUS ENQUIRY messages are expected. This
attribute applies only when the lmiProcedures is set to
vendorForum.
messageCountTimer must always be greater than checkPointTimer.rw Unsigned32 (5 | 10 | 15 | 20 | 25 | 30) .1.3.6.1.4.1.562.36.2.1.71.4.10.1.6 |
mscFrUniLmiIgnoreActiveBitThis attribute specifies whether the Frame Relay LMI Active Bit
(A-bit) has a bearing on the transfer of user data across this Frame
Relay interface for both directions of traffic flow.
When this attribute is set to yes, the A-bit status of a user DLCI
connection does not affect data transfer.
When this attribute is set to no, data received from the local
interface will be discarded if an A-bit =0 condition exists towards
the local user. Data being sent to the local interface is discarded if
an A-bit = 0 condition exists towards the subnet.rw Enumeration .1.3.6.1.4.1.562.36.2.1.71.4.10.1.7 |
mscFrUniLmiSideThis attribute can be set to user, network, or both.
When this attribute is set to user, USP LMI procedures are running.
When this attribute is set to network, NSP LMI procedures are
running. When this attribute is set to both, USPNSP LMI
procedures are running.
When the value is both, the procedures attribute must not be set to
vendorForum.
Setting the value to user when the procedures attribute is set to
autoConfigure is disallowed semantically.rw Enumeration .1.3.6.1.4.1.562.36.2.1.71.4.10.1.8 |
mscFrUniLmiPvcConfigParmsInFsrWhen this attribute is set to yes, additional Q.933 information
elements are included in the LMI Full Status message to facilitate
CPE PVC parameter configuring.
When set to yes, the Check Prov command fails if the Lmi side is
not set to network.
When set to yes, Check Prov fails if the number of DLCIs on the
FrUni is greater than 300.
If the service is not a FrUni this attribute is ignored.rw Enumeration .1.3.6.1.4.1.562.36.2.1.71.4.10.1.9 |
mscFrUniLmiStateTableThis group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. SEQUENCE OF MscFrUniLmiStateEntry .1.3.6.1.4.1.562.36.2.1.71.4.11 |
mscFrUniLmiStateEntryAn entry in the mscFrUniLmiStateTable. MscFrUniLmiStateEntry .1.3.6.1.4.1.562.36.2.1.71.4.11.1 |
mscFrUniLmiAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.71.4.11.1.1 |
mscFrUniLmiOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.ro Enumeration .1.3.6.1.4.1.562.36.2.1.71.4.11.1.2 |
mscFrUniLmiUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.ro Enumeration .1.3.6.1.4.1.562.36.2.1.71.4.11.1.3 |
mscFrUniLmiPsiTableThis group provides the protocol status of the Local Management
Interface. SEQUENCE OF MscFrUniLmiPsiEntry .1.3.6.1.4.1.562.36.2.1.71.4.12 |
mscFrUniLmiPsiEntryAn entry in the mscFrUniLmiPsiTable. MscFrUniLmiPsiEntry .1.3.6.1.4.1.562.36.2.1.71.4.12.1 |
mscFrUniLmiProtocolStatusThis attribute indicates whether the LMI is in an error condition or
whether the LMI procedures are behaving normally. When
operating with no LMI protocol, this attribute is always set to
normalCondition. When operating with LMI procedures, this
attribute is set to errorCondition after n392 of the last n393 events
are in error. The consequence of an errorCondition is that all
DLCIs on this interface will become inactive in both directions. The
errorCondition is cleared and a normalCondition is indicated when
a sufficient number of events have occurred without error. In ANSI,
this occurs when n393 consecutive good events take place.
If the procedures attribute is set to autoConfigure, this attribute is
set to configuring while adaptive LMI determines which LMI
procedures are running on the link. A single LMI error event during
auto configuration causes the attribute value to change to
errorCondition. If during configuring no LMI message is received,
an LMI errorCondition is raised after n392 x t392 seconds.ro Enumeration .1.3.6.1.4.1.562.36.2.1.71.4.12.1.1 |
mscFrUniLmiOpProceduresThe opProcedures attribute indicates the procedures being used for
the Local Management Interface. This attribute should be ignored if
protocolStatus is not normalCondition. The following procedures
are supported:
none: Local Management Interface procedures are not running on
this interface. This accommodates Frame Relay user equipment that
has not implemented any LMI procedures.
vendorForum: Local Management Interface procedures from the
Vendor Forum specification are running on this interface. DLCI
1023 is used for the LMI protocol.
ansi: Local Management Interface procedures from the ANSI
specification are running. DLCI 0 is used for the LMI protocol.
itu: Local Management Interface procedures from the ITU-T
specification are running. DLCI 0 is used for the LMI protocol. Was
previously ccitt.
unknown: Local Management Interface procedures have yet to be
determined by Adaptive LMI.ro Enumeration .1.3.6.1.4.1.562.36.2.1.71.4.12.1.2 |
mscFrUniLmiStatsTableThis group contains the operational statistics for the Frame Relay
Local Management Interface. SEQUENCE OF MscFrUniLmiStatsEntry .1.3.6.1.4.1.562.36.2.1.71.4.13 |
mscFrUniLmiStatsEntryAn entry in the mscFrUniLmiStatsTable. MscFrUniLmiStatsEntry .1.3.6.1.4.1.562.36.2.1.71.4.13.1 |
mscFrUniLmiKeepAliveStatusToIfThis attribute counts the number of Local Management Interface
keep alive status messages sent to the external user device in
response to a status enquiry for keep alive status. When the
maximum count is exceeded it wraps to zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.71.4.13.1.1 |
mscFrUniLmiFullStatusToIfThis attribute counts the number of Local Management Interface
full status messages sent to the external user device in response to a
status enquiry for keep alive or full status. When the maximum
count is reached it wraps to zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.71.4.13.1.2 |
mscFrUniLmiKeepAliveStatusEnqFromIfThis attribute counts the number of Local Management Interface
valid keep alive status enquiry messages received from the external
user device. When the maximum count is reached it wraps to zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.71.4.13.1.3 |
mscFrUniLmiFullStatusEnqFromIfThis attribute counts the number of Local Management Interface
valid full status enquiry messages received from the external user
device. When the maximum count is reached it wraps to zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.71.4.13.1.4 |
mscFrUniLmiNetworkSideEventHistoryThis attribute displays the Local Management Interface network
side procedure event history in order of occurrence. An event is
represented by a single symbol. A '+' symbol indicates a good
event. An 'X' symbol indicates a protocol error event. The leftmost
event is the most recent to occur. The provisioned eventCount (nN3/
N393) dictates the maximum number of events displayed. A good
event is triggered by receipt of a valid status enquiry message. An
error event is one of three possibilities, either a nT2/T392 timer
expiry, receipt of a status enquiry message with bad sequence
numbers, or when lmiProcedures is provisioned to vendorForum
and we receive more than nN4 status enquiry messages within the
provisioned messageCountTimer (nT3).ro AsciiString .1.3.6.1.4.1.562.36.2.1.71.4.13.1.5 |
mscFrUniLmiProtocolErrorsThis attribute counts the number of Local Management Interface
protocol errors. It is the sum of the sequence (sequenceErrors),
timeout (pollingVerifTimeouts) and too many status enquiry
messages received within the messageCountTimer (nT3) errors. The
too many status enquiries error only applies when lmiProcedures is
set to vendorForum. When the maximum count is exceeded it
wraps to zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.71.4.13.1.6 |
mscFrUniLmiUnexpectedIesThis attribute counts the number of Local Management Interface
frames received with an Information Element identifier that is
unknown or unexpected. An unexpected Information Element is not
a protocol error. When the maximum count is reached, this counter
wraps to zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.71.4.13.1.7 |
mscFrUniLmiSequenceErrorsThis attribute counts the number of Local Management Interface
Status Enquiry message sequence errors. A sequence error is receipt
of a Status Enquiry message with a receive sequence number not
equal to the last send sequence number. When the maximum count
is reached the counter wraps to zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.71.4.13.1.8 |
mscFrUniLmiUnexpectedReportsThis attribute counts the number of Local Management Interface
frames received with an unknown or unexpected report type. An
unexpected report type is not a protocol error. When the maximum
count is reached the counter wraps to zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.71.4.13.1.9 |
mscFrUniLmiPollingVerifTimeoutsThis attribute counts the number of checkPointTImer (t392) timer
expiries occurring on the Local Management Interface. When the
maximum count is reached the counter wraps to zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.71.4.13.1.10 |
mscFrUniLmiKeepAliveEnqToIfThis attribute counts the number of Local Management Interface
keep alive enquiry status messages sent to the external user device
for keep alive status. When the maximum count is reached it wraps
to zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.71.4.13.1.11 |
mscFrUniLmiFullStatusEnqToIfThis attribute counts the number of Local Management Interface
full status messages sent to the external user device in response to a
status enquiry for keep alive or full status. When the maximum
count is reached it wraps to zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.71.4.13.1.12 |
mscFrUniLmiUserSideEventHistoryThis attribute displays the Local Management Interface user side
procedure event history in order of occurrence. An event is
represented by a single symbol. A '+' symbol indicates a good
event. An 'X' symbol indicates a protocol error event. The left most
event is the most recent to occur. The provisioned eventCount (nN3/
N393) dictates the maximum number of events displayed. A good
event is triggered by receipt of a valid status message. An error
event is either a nT1/T391 timer expiry or receipt of a status
message with bad sequence numbers.ro AsciiString .1.3.6.1.4.1.562.36.2.1.71.4.13.1.13 |
mscFrUniLmiStatusSequenceErrorsThis attribute counts the number of Local Management Interface
Status message sequence errors. A sequence error is receipt of a
Status message with a receive sequence number not equal to the last
send sequence number. When the maximum count is reached the
counter wraps to zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.71.4.13.1.14 |
mscFrUniLmiNoStatusReportCountThis attribute counts the number of times when no status report or
an invalid status report comes from the external network. This
attribute is incremented in two cases:
i) after a status enquiry is sent out and T391 timer expires without
having a status report received.
ii) an invalid status report is received.
When the maximum count is reached it wraps to zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.71.4.13.1.15 |
mscFrUniLmiUspParmsTableThis group contains the provisionable attributes of the Local
Management Interface user side procedure. SEQUENCE OF MscFrUniLmiUspParmsEntry .1.3.6.1.4.1.562.36.2.1.71.4.14 |
mscFrUniLmiUspParmsEntryAn entry in the mscFrUniLmiUspParmsTable. MscFrUniLmiUspParmsEntry .1.3.6.1.4.1.562.36.2.1.71.4.14.1 |
mscFrUniLmiFullStatusPollingCyclesThis attribute specifies how frequently the Frame Relay UNI service
should initiate a Status Enquiry for a full PVC status report. A
polling cycle is a Status Enquiry and Status Report exchange.
This attribute is used only if the side attribute is either user or both.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.4.14.1.1 |
mscFrUniLmiLinkVerificationTimerThis attribute specifies how frequently the Frame Relay UNI service
should initiate a Status Enquiry for link integrity verification. It
must be less than checkPointTimer (t392).
When the Lmi side is network, this attribute is ignored.rw Unsigned32 (5 | 10 | 15 | 20 | 25 | 30) .1.3.6.1.4.1.562.36.2.1.71.4.14.1.2 |
mscFrUniDlci OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.71.5 |
mscFrUniDlciRowStatusTableThis entry controls the addition and deletion of
mscFrUniDlci components. SEQUENCE OF MscFrUniDlciRowStatusEntry .1.3.6.1.4.1.562.36.2.1.71.5.1 |
mscFrUniDlciRowStatusEntryA single entry in the table represents a single
mscFrUniDlci component. MscFrUniDlciRowStatusEntry .1.3.6.1.4.1.562.36.2.1.71.5.1.1 |
mscFrUniDlciRowStatusThis variable is used as the basis for SNMP naming of
mscFrUniDlci components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.71.5.1.1.1 |
mscFrUniDlciComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.71.5.1.1.2 |
mscFrUniDlciStorageTypeThis variable represents the storage type value for the
mscFrUniDlci tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.71.5.1.1.4 |
mscFrUniDlciIndexThis variable represents the index for the mscFrUniDlci tables. Integer32 .1.3.6.1.4.1.562.36.2.1.71.5.1.1.10 |
mscFrUniDlciDc OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.71.5.2 |
mscFrUniDlciDcRowStatusTableThis entry controls the addition and deletion of
mscFrUniDlciDc components. SEQUENCE OF MscFrUniDlciDcRowStatusEntry .1.3.6.1.4.1.562.36.2.1.71.5.2.1 |
mscFrUniDlciDcRowStatusEntryA single entry in the table represents a single
mscFrUniDlciDc component. MscFrUniDlciDcRowStatusEntry .1.3.6.1.4.1.562.36.2.1.71.5.2.1.1 |
mscFrUniDlciDcRowStatusThis variable is used as the basis for SNMP naming of
mscFrUniDlciDc components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.71.5.2.1.1.1 |
mscFrUniDlciDcComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.71.5.2.1.1.2 |
mscFrUniDlciDcStorageTypeThis variable represents the storage type value for the
mscFrUniDlciDc tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.71.5.2.1.1.4 |
mscFrUniDlciDcIndexThis variable represents the index for the mscFrUniDlciDc tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.71.5.2.1.1.10 |
mscFrUniDlciDcOptionsTableThis group defines attributes associated with a direct call. It defines
connection in terms of path and call option parameters. This
connection can be permanent (PVC), switched (SVC), or switched
permanent (SPVC). It can have four facilities:
- CCITT Facilities
- DTE Facilities
- National Facilities
- International Facilities
The total number of bytes of facilities including the facility codes
and all of the facility data from all of the four classes of facilities
must not exceed 512 bytes. SEQUENCE OF MscFrUniDlciDcOptionsEntry .1.3.6.1.4.1.562.36.2.1.71.5.2.10 |
mscFrUniDlciDcOptionsEntryAn entry in the mscFrUniDlciDcOptionsTable. MscFrUniDlciDcOptionsEntry .1.3.6.1.4.1.562.36.2.1.71.5.2.10.1 |
mscFrUniDlciDcRemoteNpiThis attribute specifies the Numbering Plan Indicator (NPI) of the
remoteDna.rw Enumeration .1.3.6.1.4.1.562.36.2.1.71.5.2.10.1.3 |
mscFrUniDlciDcRemoteDnaThis attribute specifies the Data Network Address (DNA) of the
service at the remote end of the DLCI. This is the called
(destination) DCE address (DNA) of this PVC.rw DigitString .1.3.6.1.4.1.562.36.2.1.71.5.2.10.1.4 |
mscFrUniDlciDcRemoteDlciThis attribute specifies the remote DLCI of the PVC connection.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.5.2.10.1.5 |
mscFrUniDlciDcTypeThis attribute specifies the type of VC call.
If the value is set to permanentMaster, then a permanent
connection will be established between two ends. The remote end
must be defined as a permanentSlave, permanentBackupSlave, or
permanentSlaveWithBackup. The connection cannot be established
if the remote end is defined as anything else. The end defined as
permanentMaster always initiates the calls. It attempts to call once
per minute.
If the value is set to permanentSlave then a permanent connection
will be established between two ends. The remote end must be
defined as a permanentMaster. The connection cannot be
established if the remote end is defined as anything else. The
permanentSlave end attempts to call once per minute.
If the value is set to permanentSlaveWithBackup then a permanent
connection will be established between the two ends. The remote
end must be defined as a permanentMaster. The connection cannot
be established if the remote interface is defined as anything else.
The permanentSlaveWithBackup attempts to call once per minute.
When type is set to permanentSlaveWithBackup, the connection is
cleared if the interface becomes unavailable. This enables a retry of
the connection which can be redirected to the
permanentBackupSlave.
If the value is set to permanentBackupSlave then a permanent
connection is established between the two ends only if the
permanentMaster end is disconnected from the
permanentSlaveWithBackup end and a backup call is established
by the call redirection system. If the permanentSlaveWithBackup
interface becomes available again, the permanentBackupSlave end
is disconnected and the permanentSlaveWithBackup end is
reconnected to the permanentMaster end. The
permanentBackupSlave end does not try to establish a call.
If the value is set to spvcMaster, then a permanent connection is
established between two ends, with resiliency at the NNI), if the
connection transits across two or more networks. The remote end,
which may be in the same network, or an external network that is
reachable via Frame Relay NNIs, must be defined as either a
spvcSlave, spvcBackupSlave or spvcSlaveWithBackup. The
connection cannot be established if the remote end is defined as
anything else. The end defined as spvcMaster always initiates the
call. It attempts to call once per minute. The call is attempted by the
spvcMaster and accepted by the remote end only if all of the
following conditions are satisfied, at both ends:
1. The physical layer must be operational.
2. The LMI procedures must be in normalCondition (that is, no
service affecting condition).
3. If the LMI side attribute is provisioned to both, the A-bit
received from the interface must be Active. If the LMI side
attribute is not provisioned to both, this condition does not
apply.
After a call is cleared, the spvcMaster end attempts to retry the call
according to the rule for the clear cause. If the call is cleared or
rejected due to the failure of one of the three conditions indicated
above, or due to unavailability of resources along any point in the
connection path, the call will be retried after 60 seconds. For all
other causes, such as loss of service at an NNI, the call will be
retried immediately.
If the value is set to spvcSlave then an SPVC connection is
established between two ends. The remote end must be defined as
an spvcMaster. The connection cannot be established if the remote
end is defined as anything else. The spvcSlave end does not attempt
to call.
If the value is set to spvcSlaveWithBackup then a SPVC connection
is established between the two ends. The remote end must be
defined as an spvcMaster. The connection cannot be established if
the remote interface end is defined as anything else. Unlike a
permanentSlaveWithBackup end, the spvcSlaveWithBackup end
does not attempt to call. If the value is set to spvcSlaveWithBackup,
the connection is cleared if the interface becomes unavailable. This
enables a retry of the connection by the spvcMaster end, which may
be redirected to an end that is set to spvcBackupSlave.
If the value is set to spvcBackupSlave then an SPVC connection is
established between the two ends only if the spvcMaster end is
disconnected from the spvcSlaveWithBackup end, and a backup
call is redirected by the call redirection system. Unlike the PVC
connection, if the spvcSlaveWithBackup interface becomes
available again, the spvcBackupSlave end is not disconnected and
the spvcSlaveWithBackup end is not reconnected to the spvcMaster
end. Neither the spvcBackupSlave nor the spvcSlaveWithBackup
ends try to establish an SPVC call.rw Enumeration .1.3.6.1.4.1.562.36.2.1.71.5.2.10.1.6 |
mscFrUniDlciDcTransferPriorityThis attribute specifies the transfer priority to the local network for
the outgoing calls using this particular DLCI. It overrides the
defaultTransferPriority provisioned in its associated Dna
component.
The transfer priority is a preference configured for an application
according to its delay-sensitivity requirement. Frames with higher
transfer priority are served by the network before the frames with
lower priority. The transfer priority standard is defined to have 16
levels from 0 to 15.
Each transfer priority n, where n is the transfer priority index, has a
default setting for routing class of service (multimedia, delay, or
throughput) and Frame Relay egress queue (depending on the
number of supported egress queues on the remote end interface).
These settings are specified by the routingClassOfService and
emissionPriority attributes provisioned under the Mod Frs DprsNet
Tpm/n component.
Specifying useDnaDefTP means using the value given by
defaultTransferPriority in the associated Dna for this DLCI.rw Enumeration .1.3.6.1.4.1.562.36.2.1.71.5.2.10.1.9 |
mscFrUniDlciDcDiscardPriorityThis attribute specifies the discard priority for outgoing call using
this DLCI.
The discard priority has three provisioning values: normal, high,
and useDnaDefPriority. Under congestion conditions, traffic with
normal priority is discarded before traffic with high priority. The
Dna default value (provisioned by outDefaultPriority) is taken if
this attribute is set to the value useDnaDefPriority.rw Enumeration .1.3.6.1.4.1.562.36.2.1.71.5.2.10.1.10 |
mscFrUniDlciDcDeDiscardPriorityThis attribute specifies whether the discardPriority applies to DE
frames for this DLCI.
When set to determinedByDiscardPriority, traffic with DE bit set
will be discarded according to the setting of the discardPriority.
When set to lowest, all traffic with DE bit set is treated the same and
is sent to the subnet at the lowest discard priority.rw Enumeration .1.3.6.1.4.1.562.36.2.1.71.5.2.10.1.11 |
mscFrUniDlciDcDataPathThis attribute specifies the data path to be used by Virtual Circuits
on this interface. The value of the dataPath attribute in the Dna
component is overridden by this attribute if the value is not
useDnaValue.
This value applies to the connection after data transfer state is
reached. All the data and control traffic will be sent using this data
path. If the provisioned dataPath is not available the connection is
not established.
The value of the dataPath is signalled by both ends of the
connection. If this value is not the same at both ends dprsOnly is
used for the duration of the connection.
A virtual circuit connection is always established using dprsOnly
even if this attribute is provisioned as some other value.
dprsOnly - The dynamic packet routing system is used.
dprsMcsOnly - The DPRS Multi-Service Cut-Through Switching
path is used.
dprsMcsFirst - The DPRS Multi-Service Cut-Through Switching
path is used if it is available. If it is not available, dprsOnly is used.
useDnaValue - The routing system used is based on the value
provisioned in the Dna component.rw Enumeration .1.3.6.1.4.1.562.36.2.1.71.5.2.10.1.12 |
mscFrUniDlciDcCugIndexThis attribute specifies the CUG index which is to be signalled in
PVC and SPVC call requests to the remote end.
The type of CUG signalling is defined in attribute cugType in this
component.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.5.2.10.1.13 |
mscFrUniDlciDcCugTypeThis attribute specifies the type of CUG signalling to be used in
PVC and SPVC call requests. Index of CUG to be used is defined in
attribute cugIndex in this component.
Possible values are:
cug - signal CUG
cugOa - signal CUG with outgoing access
doNotSignal - no CUG in call requestrw Enumeration .1.3.6.1.4.1.562.36.2.1.71.5.2.10.1.14 |
mscFrUniDlciDcMapIpCosToFrQosThis attribute specifies whether an IP TOS value is mapped to an
FR QOS. The mapping used is provisioned in the Mod Frs
IpCosToFrQos component.
When this attribute is set to yes, at Frame Relay egress, the IP TOS
byte in each frame is checked. The TOS value determines the egress
emission queue and the discard priority for that frame.
When this attribute is set to no, FR QOS is determined by the
provisioned discard priority and transfer priority.rw Enumeration .1.3.6.1.4.1.562.36.2.1.71.5.2.10.1.15 |
mscFrUniDlciDcNfaTableThis is the i'th National facility required for this direct call. Within
the provisioning system, the user specifies the facility code along
with the facility parameters. The facility is represented internally as
a hexadecimal string following the X.25 ITU-T representation for
facility data.
Two explicit attributes discardPriority and pathSensitivity are
created to replace H.01 and H.30 in the group
VcsDirectCallOptionsProv of this file. The migrate escape here
(DcComponent::migrateFaxEscape) propagates the old provisioning
data under H.01 and H.30 into discardPriority and transferPriority.
The rule of the above propagation are: 0 in H.01 is equivalent to
discardPriority 0; 1 in H.01 is equivalent to discardPriority 1. And 0
in H.30 is equivalent to transferPriority throughput; 1 in H.30 is
equivalent to pathSensitivity delay.
Please refer to discardPriority and pathSensitivity for more
information on how to use them.obsolete SEQUENCE OF MscFrUniDlciDcNfaEntry .1.3.6.1.4.1.562.36.2.1.71.5.2.202 |
mscFrUniDlciDcNfaEntryAn entry in the mscFrUniDlciDcNfaTable.obsolete MscFrUniDlciDcNfaEntry .1.3.6.1.4.1.562.36.2.1.71.5.2.202.1 |
mscFrUniDlciDcNfaIndexThis variable represents the index for the mscFrUniDlciDcNfaTable.obsolete Integer32 (1 | 48) .1.3.6.1.4.1.562.36.2.1.71.5.2.202.1.1 |
mscFrUniDlciDcNfaValueThis variable represents an individual value for the
mscFrUniDlciDcNfaTable.rwobsolete HexString .1.3.6.1.4.1.562.36.2.1.71.5.2.202.1.2 |
mscFrUniDlciDcNfaRowStatusThis variable is used to control the addition and deletion
of individual values of the mscFrUniDlciDcNfaTable.rwobsolete RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.71.5.2.202.1.3 |
mscFrUniDlciVc OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.71.5.3 |
mscFrUniDlciVcRowStatusTableThis entry controls the addition and deletion of
mscFrUniDlciVc components. SEQUENCE OF MscFrUniDlciVcRowStatusEntry .1.3.6.1.4.1.562.36.2.1.71.5.3.1 |
mscFrUniDlciVcRowStatusEntryA single entry in the table represents a single
mscFrUniDlciVc component. MscFrUniDlciVcRowStatusEntry .1.3.6.1.4.1.562.36.2.1.71.5.3.1.1 |
mscFrUniDlciVcRowStatusThis variable is used as the basis for SNMP naming of
mscFrUniDlciVc components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.71.5.3.1.1.1 |
mscFrUniDlciVcComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.71.5.3.1.1.2 |
mscFrUniDlciVcStorageTypeThis variable represents the storage type value for the
mscFrUniDlciVc tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.71.5.3.1.1.4 |
mscFrUniDlciVcIndexThis variable represents the index for the mscFrUniDlciVc tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.71.5.3.1.1.10 |
mscFrUniDlciVcCadTableThis group represents operational call data related to Frame Relay
Vc. It can be displayed only for Frame Relay Vc which is created by
application. SEQUENCE OF MscFrUniDlciVcCadEntry .1.3.6.1.4.1.562.36.2.1.71.5.3.10 |
mscFrUniDlciVcCadEntryAn entry in the mscFrUniDlciVcCadTable. MscFrUniDlciVcCadEntry .1.3.6.1.4.1.562.36.2.1.71.5.3.10.1 |
mscFrUniDlciVcTypeThis attribute displays the type of call, pvc,svc,spvc or frf10spvc.ro Enumeration .1.3.6.1.4.1.562.36.2.1.71.5.3.10.1.1 |
mscFrUniDlciVcStateThis attribute displays the state of call control. P5 state is not
supported but is listed for completness. Transitions from one state to
another take very short time. state most often displayed is
dataTransferP4.ro Enumeration .1.3.6.1.4.1.562.36.2.1.71.5.3.10.1.2 |
mscFrUniDlciVcPreviousStateThis attribute displays the previous state of call control. This is a
valuable field to determine how the processing is progressing.ro Enumeration .1.3.6.1.4.1.562.36.2.1.71.5.3.10.1.3 |
mscFrUniDlciVcDiagnosticCodeThis attribute displays the internal substate of call control. It is used
to further refine state of call processing.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.5.3.10.1.4 |
mscFrUniDlciVcPreviousDiagnosticCodeThis attribute displays the internal substate of call control. It is used
to further refine state of call processing.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.5.3.10.1.5 |
mscFrUniDlciVcCalledNpiThis attribute displays the Numbering Plan Indicator (NPI) of the
called end.ro Enumeration .1.3.6.1.4.1.562.36.2.1.71.5.3.10.1.6 |
mscFrUniDlciVcCalledDnaThis attribute displays the Data Network Address (Dna) of the
called (destination) DTE to which this call is sent. This address if
defined at recieving end will complete Vc connection.ro DigitString .1.3.6.1.4.1.562.36.2.1.71.5.3.10.1.7 |
mscFrUniDlciVcCalledLcnThis attribute displays the Logical Channel Number of the called
end. It is valid only after both ends of Vc exchanged relevant
information.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.5.3.10.1.8 |
mscFrUniDlciVcCallingNpiThis attribute displays the Numbering Plan Indicator (NPI) of the
calling end.ro Enumeration .1.3.6.1.4.1.562.36.2.1.71.5.3.10.1.9 |
mscFrUniDlciVcCallingDnaThis attribute displays the Data Network Address (Dna) of the
calling end.ro DigitString .1.3.6.1.4.1.562.36.2.1.71.5.3.10.1.10 |
mscFrUniDlciVcCallingLcnThis attribute displays the Logical Channel Number of the calling
end.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.5.3.10.1.11 |
mscFrUniDlciVcAccountingEnabledThis attribute indicates that this optional section of accounting
record is suppressed or permitted. If accountingEnabled is yes,
conditions for generation of accounting record were met. These
conditions include billing options, vc recovery conditions and
Module wide accounting data options.ro Enumeration .1.3.6.1.4.1.562.36.2.1.71.5.3.10.1.12 |
mscFrUniDlciVcFastSelectCallThis attribute displays that this is a fast select call.ro Enumeration .1.3.6.1.4.1.562.36.2.1.71.5.3.10.1.13 |
mscFrUniDlciVcPathReliabilityThis attribute displays the path reliability.ro Enumeration .1.3.6.1.4.1.562.36.2.1.71.5.3.10.1.19 |
mscFrUniDlciVcAccountingEndThis attribute indicates if this end should generate an accounting
record. Normally, callingEnd is the end to generate an accounting
record.ro Enumeration .1.3.6.1.4.1.562.36.2.1.71.5.3.10.1.20 |
mscFrUniDlciVcPriorityThis attribute displays whether the call is a normal or a high
priority call.ro Enumeration .1.3.6.1.4.1.562.36.2.1.71.5.3.10.1.21 |
mscFrUniDlciVcSegmentSizeThis attribute displays the segment size (in bytes) used on the call.
It is used to calculate the number of segments transmitted and
received.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.5.3.10.1.22 |
mscFrUniDlciVcMaxSubnetPktSizeThis attribute indicates the maximum packet size allowed on the Vc.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.5.3.10.1.27 |
mscFrUniDlciVcRcosToNetworkThis attribute indicates the routing metric routing class of service to
the network.ro Enumeration .1.3.6.1.4.1.562.36.2.1.71.5.3.10.1.28 |
mscFrUniDlciVcRcosFromNetworkThis attribute displays the routing metric Routing Class of Service
from the Network.ro Enumeration .1.3.6.1.4.1.562.36.2.1.71.5.3.10.1.29 |
mscFrUniDlciVcEmissionPriorityToNetworkThis attribute displays the network internal emission priotity to the
network.ro Enumeration .1.3.6.1.4.1.562.36.2.1.71.5.3.10.1.30 |
mscFrUniDlciVcEmissionPriorityFromNetworkThis attribute displays the network internal emission priotity from
the network.ro Enumeration .1.3.6.1.4.1.562.36.2.1.71.5.3.10.1.31 |
mscFrUniDlciVcDataPathThis attribute indicates the data path used by the connection. The
data path is provisioned in Dna and DirectCall components. The
displayed value of this attribute can be different from the
provisioned value.
If the connection is using dprsOnly data path, the string
dprsOnly is displayed. (dynamic packet routing system)
If the connection is using dprsMcsOnly data path, the string
dprsMcsOnly is displayed.
If the connection is using dprsMcsFirst data path, the string
dprsMcsFirst is displayed.ro AsciiString .1.3.6.1.4.1.562.36.2.1.71.5.3.10.1.32 |
mscFrUniDlciVcIntdTableThis group defines display of interval data collected by Vc. Data in
this group is variable and may depend on time when this display
command is issued. SEQUENCE OF MscFrUniDlciVcIntdEntry .1.3.6.1.4.1.562.36.2.1.71.5.3.11 |
mscFrUniDlciVcIntdEntryAn entry in the mscFrUniDlciVcIntdTable. MscFrUniDlciVcIntdEntry .1.3.6.1.4.1.562.36.2.1.71.5.3.11.1 |
mscFrUniDlciVcCallReferenceNumberThis attribute is obsolete. It is replaced by the callReferenceNumber
attribute to display the call reference number in decimal. The
SNMP reference for the callReferenceNumber attribute is
callReferenceNumberDecimal.roobsolete Hex .1.3.6.1.4.1.562.36.2.1.71.5.3.11.1.1 |
mscFrUniDlciVcElapsedTimeTillNowThis attribute displays the elapsed time representing the period of
this interval data. It is elapsed time in 0.1 second increments since
Vc started.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.5.3.11.1.2 |
mscFrUniDlciVcSegmentsRxThis attribute displays the number of segments received at the time
command was issued. This is the segment received count
maintained by accounting at each end of the Vc. This counter is
updated only when the packet cannot be successfully delivered out
of the sink Vc and to the sink AP Conditions in which packets may
be discarded by the sink Vc include: missing packets due to subnet
discards, segmentation protocol violations due to subnet discard,
duplicated and out-of-ranged packets and packets that arrive while
Vc is in path recovery state.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.5.3.11.1.3 |
mscFrUniDlciVcSegmentsSentThis attribute displays the number of segments sent at the time
command was issued. This is the segment sent count maintained by
accounting at the source Vc. Vc only counts packets that Vc thinks
can be delivered successfully into the subnet. In reality, these
packets may be dropped by trunking, for instance. This counter is
not updated when splitting fails, when Vc is in a path recovery state,
when packet forwarding fails to forward this packet and when
subsequent packets have to be discarded as we want to minimize the
chance of out-of-sequence and do not intentionally send out-of-
sequenced packets into the subnet.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.5.3.11.1.4 |
mscFrUniDlciVcStartTimeThis attribute displays the start time of this interval period. If Vc
spans 12 hour time or time of day change startTime reflects new
time as recorded at 12 hour periods or time of day changes.ro EnterpriseDateAndTime .1.3.6.1.4.1.562.36.2.1.71.5.3.11.1.5 |
mscFrUniDlciVcCallReferenceNumberDecimalThis attribute displays the call reference number which is a unique
number generated by the switch.The same Call Reference Number
is stored in the interval data (accounting record) at both ends of the
call. It can be used as one of the attributes in matching duplicate
records generated at each end of the call.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.5.3.11.1.7 |
mscFrUniDlciVcFrdTableThis group defines Frame Relay attributes collected by Frame Relay
Vc.
The purpose of Vc attributes is to aid end users and verification
people to understand the Vc internal behavior. This is particularly
useful when the network has experienced abnormality and we want
to isolate problems and pinpoint trouble spots.
Attributes are collected on a per Vc basis. Until a need is identified,
statistics are not collected at a processor level. Each attribute is
stored in a 32 bit field and is initialized to zero when a Vc enters
into the data transfer state. When a PVC is disconnected and then
connected again, the attributes will be reset. Attributes cannot be
reset through other methods.
Frame Relay Vc uses a best effort data packet delivery protocol and
a different packet segmentation and combination methods from the
General Vc. The Frame Relay Vc uses the same call setup and
control mechanism (e.g. the support of non-flow control data
packets) as in a General Vc. Most General Vc statistics and internal
variables are used in a Frame Relay Vc and are displayed by
software developers SEQUENCE OF MscFrUniDlciVcFrdEntry .1.3.6.1.4.1.562.36.2.1.71.5.3.12 |
mscFrUniDlciVcFrdEntryAn entry in the mscFrUniDlciVcFrdTable. MscFrUniDlciVcFrdEntry .1.3.6.1.4.1.562.36.2.1.71.5.3.12.1 |
mscFrUniDlciVcFrmCongestedToSubnetThis attribute displays the number of frames from link discarded
due to lack of resources. It keeps track of the number of frames
from link that have to be discarded. The discard reasons include
insufficient memory for splitting the frame into smaller subnet
packet size.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.5.3.12.1.2 |
mscFrUniDlciVcCannotForwardToSubnetThis attribute displays the number of discarded packets that can not
be forwarded into the subnet because of subnet congestion.
Number of frames from link discarded due to failure in forwarding
a packet from Vc into the subnet.- This attribute is increased when
packet forwarding fails to forward a packet into the subnet. If a
frame is split into multiple subnet packets and a partial packet has
to be discarded, all subsequent partial packets that have not yet been
delivered to the subnet will be discarded as well.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.5.3.12.1.3 |
mscFrUniDlciVcNotDataXferToSubnetThis attribute records the number of frames from link discarded
when the Vc tries to recover from internal path failure.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.5.3.12.1.4 |
mscFrUniDlciVcOutOfRangeFrmFromSubnetThis attribute displays the number of frames from subnet discarded
due to out of sequence range for arriving too late.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.5.3.12.1.5 |
mscFrUniDlciVcCombErrorsFromSubnetThis attribute records the number of subnet packets discarded at the
sink Vc due to the Vc segmentation and combination protocol error.
Usually, this occurs when the subnet discards packets and thus this
statistics can be used to guest the number of subnet packets that are
not delivered to the Vc. It cannot be used as an actual measure
because some subnet packets may have been delivered to Vc but
have to be discarded because these are partial packets to a frame in
which some other partial packets have not been properly delivered
to Vcro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.5.3.12.1.6 |
mscFrUniDlciVcDuplicatesFromSubnetThis attribute displays the number of subnet packets discarded due
to duplication. Although packets are not retransmitted by the Frame
Relay Vc, it is possible for the subnet to retransmit packets. When
packets are out-of-sequenced and copies of the same packets arrive,
then this attribute is increased.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.5.3.12.1.7 |
mscFrUniDlciVcNotDataXferFromSubnetThis attribute displays the number of subnet packets discarded when
data transfer is suspended in Vc recovery.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.5.3.12.1.8 |
mscFrUniDlciVcFrmLossTimeoutsThis attribute displays the number of lost frame timer expiries.
When this count is excessive, the network is very congested and
packets have been discarded in the subnet.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.5.3.12.1.9 |
mscFrUniDlciVcOoSeqByteCntExceededThis attribute displays the number times that the out of sequence
byte threshold is exceeded. When the threshold is exceeded, this
condition is treated as if the loss frame timer has expired and all
frames queued at the sink Vc are delivered to the AP. We need to
keep this count to examine if the threshold is engineered properly.
This should be used in conjunction with the peak value of out-of-
sequenced queue and the number of times the loss frame timer has
expired. This count should be relatively small when compared with
loss frame timer expiry count.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.5.3.12.1.10 |
mscFrUniDlciVcPeakOoSeqPktCountThis attribute displays the frame relay peak packet count of the out
of sequence queue. This attribute records the maximum queue
length of the out-of-sequenced queue. The counter can be used to
deduce the message buffer requirement on a Vc.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.5.3.12.1.11 |
mscFrUniDlciVcPeakOoSeqFrmForwardedThis attribute displays the frame relay peak size of the
sequence packet queue. The subnet may deliver packets out-of-
sequenced. These packets are then queued in an out-of-sequenced
queue, waiting for a packet with the expected sequence number to
come. When that packet arrives, this attribute records the maximum
number of packets that were out-of-sequenced, but now have
become in-sequenced. The statistics is used to measure expected
queue size due to normal subnet packet disorder (not due to subnet
packet discard). Current implementation also uses this statistics to
set a maximum size for the out-of-sequenced queue.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.5.3.12.1.12 |
mscFrUniDlciVcSendSequenceNumberThis attribute displays the Vc internal packet's send sequence
number. Note that a 'packet' in this context, may be either a user
data packet, or an OAM frame.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.5.3.12.1.13 |
mscFrUniDlciVcPktRetryTimeoutsThis attribute displays the number of packets which have
retransmission time-outs. When this count is excessive, the network
is very congested and packets have been discarded in the subnet.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.5.3.12.1.15 |
mscFrUniDlciVcPeakRetryQueueSizeThis attribute displays the peak size of retransmission queue.
This attribute is used as an indicator of the acknowledgment
behavior across the subnet. Records the largest body of
unacknowledged packets.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.5.3.12.1.16 |
mscFrUniDlciVcSubnetRecoveriesThis attribute displays the number of successful Vc recovery
attempts.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.5.3.12.1.17 |
mscFrUniDlciVcOoSeqPktCntExceededThis attribute displays the number times that the out of sequence
packet threshold is exceeded. When the threshold is exceeded, this
condition is treated as if the loss frame timer has expired and all
frames queued at the sink Vc are delivered to the AP. We need to
keep this count to examine if the threshold is engineered properly.
This should be used in conjunction with the peak value of out-of-
sequenced queue and the number of times the loss frame timer has
expired. This count should be relatively small when compared with
loss frame timer expiry count.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.5.3.12.1.19 |
mscFrUniDlciVcPeakOoSeqByteCountThis attribute displays the frame relay peak byte count of the out of
sequence queue. This attribute records the maximum queue length
of the out-of-sequenced queue. The counter can be used to deduce
the message buffer requirement on a Vc.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.5.3.12.1.20 |
mscFrUniDlciVcDmepTableThis attribute displays the data path used by the connection. Data
path is provisioned in Dna and DirectCall components.
If the connection is using dprsOnly data path, this attribute is
empty.
If the connection is using dprsMcsOnly or dprsMcsFirst data path,
this attribute displays component name of the dprsMcsEndPoint. SEQUENCE OF MscFrUniDlciVcDmepEntry .1.3.6.1.4.1.562.36.2.1.71.5.3.417 |
mscFrUniDlciVcDmepEntryAn entry in the mscFrUniDlciVcDmepTable. MscFrUniDlciVcDmepEntry .1.3.6.1.4.1.562.36.2.1.71.5.3.417.1 |
mscFrUniDlciVcDmepValueThis variable represents both the value and the index for the
mscFrUniDlciVcDmepTable.ro RowPointer .1.3.6.1.4.1.562.36.2.1.71.5.3.417.1.1 |
mscFrUniDlciSp OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.71.5.4 |
mscFrUniDlciSpRowStatusTableThis entry controls the addition and deletion of
mscFrUniDlciSp components. SEQUENCE OF MscFrUniDlciSpRowStatusEntry .1.3.6.1.4.1.562.36.2.1.71.5.4.1 |
mscFrUniDlciSpRowStatusEntryA single entry in the table represents a single
mscFrUniDlciSp component. MscFrUniDlciSpRowStatusEntry .1.3.6.1.4.1.562.36.2.1.71.5.4.1.1 |
mscFrUniDlciSpRowStatusThis variable is used as the basis for SNMP naming of
mscFrUniDlciSp components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.71.5.4.1.1.1 |
mscFrUniDlciSpComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.71.5.4.1.1.2 |
mscFrUniDlciSpStorageTypeThis variable represents the storage type value for the
mscFrUniDlciSp tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.71.5.4.1.1.4 |
mscFrUniDlciSpIndexThis variable represents the index for the mscFrUniDlciSp tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.71.5.4.1.1.10 |
mscFrUniDlciSpParmsTableThis group contains the provisionable attributes for the Data Link
Connection Identifier. These attributes reflect the service parameters
specific to this instance of DLCI. The congestion control attributes
in this group are defined in T1.606 Addendum 1. SEQUENCE OF MscFrUniDlciSpParmsEntry .1.3.6.1.4.1.562.36.2.1.71.5.4.11 |
mscFrUniDlciSpParmsEntryAn entry in the mscFrUniDlciSpParmsTable. MscFrUniDlciSpParmsEntry .1.3.6.1.4.1.562.36.2.1.71.5.4.11.1 |
mscFrUniDlciSpMaximumFrameSizeThis attribute specifies the maximum number of octets which may
be included in the information field. The frame relay header and
CRC octets are not included in this definition. This attribute
corresponds to the dN1 parameter described in the Vendor Forum
Specification.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.5.4.11.1.1 |
mscFrUniDlciSpRateEnforcementThis attribute specifies whether rate enforcement is in effect for this
user Data Link Connection on this Frame Relay interface. Turning
on rate enforcement means that CIR and DE=1 traffic will be
measured and enforced. Turning off rate enforcement means that all
frames from the user will be accepted and no modifications to the
frame with respect to the DE bit will be made.rw Enumeration .1.3.6.1.4.1.562.36.2.1.71.5.4.11.1.2 |
mscFrUniDlciSpCommittedInformationRateThis attribute specifies the committed information rate (CIR) in bits
per second (bit/s). When rateEnforcement is set to on, cir is the rate
at which the network agrees to transfer information under normal
conditions. This rate is measured over a measurement interval (t)
that is determined internally based on CIR and the committed burst
size (Bc). An exception to this occurs when CIR is provisioned to
be zero, in which case the measurement interval (t) must be
provisioned explicitly.
This attribute is ignored when rateEnforcement is off. If
rateEnforcement is on and this attribute is 0, Bc must also be 0.rw Gauge32 .1.3.6.1.4.1.562.36.2.1.71.5.4.11.1.3 |
mscFrUniDlciSpCommittedBurstSizeThis attribute specifies the committed burst size (Bc) in bits. bc is
the amount of data that a network agrees to transfer under normal
conditions over a measurement interval (t). Data marked DE=1 is
not accounted for in Bc.
This attribute is ignored when rateEnforcement is off. If
rateEnforcement is on and this attribute is 0, cir must also be 0.rw Gauge32 .1.3.6.1.4.1.562.36.2.1.71.5.4.11.1.4 |
mscFrUniDlciSpExcessBurstSizeThis attribute specifies the excess burst size (Be) in bits. Be is the
amount of uncommitted data that the network will attempt to deliver
over measurement interval T. Data marked DE=1 by the user or by
the network is accounted for here.
CIR, Bc, and Be cannot all be zero when rateEnforcement is on.rw Gauge32 .1.3.6.1.4.1.562.36.2.1.71.5.4.11.1.5 |
mscFrUniDlciSpMeasurementIntervalWhen cir and bc are zero and rateEnforcement is on, this attribute
must be provisioned to specify the time interval (in milliseconds)
over which rates and burst sizes are measured.
When cir and bc are non-zero, the time interval is internally
calculated and is not shown. In that situation, this field is ignored,
and is not representative of the time interval.
This attribute is ignored when rateEnforcement is off, or when cir
and bc are non-zero. If rateEnforcement is on and both cir and bc
are zero, this field must be non-zero.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.5.4.11.1.6 |
mscFrUniDlciSpRateAdaptationThis attribute specifies whether rate adaptation is in effect for this
user Data Link Connection on this Frame Relay interface. Rate
adaptation is a feature that, in periods of congestion, adapts the rate
at which the user is allowed to send data into the network to that
which the network is able to handle at that time. This pro-active
measure of handling congestion optimizes network resources by
causing the ingress to discard frames that would otherwise be
discarded in the network.
If this attribute is set to on, then, at the onset of congestion, the
excess information rate (EIR) is reduced to a very low rate. If
congestion persists, then the allowed CIR is reduced geometrically
by 25% of the current value at that time. The minimum to which
CIR can be reduced is 1/16th (6.25%) of the provisioned value. As
congestion alleviates, CIR is increased linearly by 6.25% of the
provisioned value specified in committedInformationRate.
If set to eirOnly, then rate adaptation will only apply to the excess
information rate (EIR). At the onset of congestion, the allowed EIR
is reduced by 25% of its provisioned value. If congestion persists,
EIR is reduced geometrically by 25% of the current value at that
time. As congestion alleviates, EIR is gradually increased linearly
by 6.25% of the provisioned EIR.
If set to cirProportionate, then rate adaptation will also only apply
to the excess information rate (EIR). At the onset of congestion the
initial allowed EIR is set to a multiple of the provisioned CIR. If
congestion persists, the allowed EIR is reduced geometrically by
25% of the current value at that time. As congestion alleviates, EIR
is gradually increased linearly by 6.25% of the provisioned EIR.
Note that the allowed EIR may be set higher than the provisioned
EIR, since it is calculated initially using another parameter, the
provisioned CIR. If the allowed EIR at the moment is higher than
the provisioned EIR, then the provisioned EIR is used instead.
This attribute can only be set to on eirOnly or cirProportionate if
rateEnforcement is turned on.rw Enumeration .1.3.6.1.4.1.562.36.2.1.71.5.4.11.1.7 |
mscFrUniDlciSpAccountingThis attribute specifies whether accounting data collection and
record generation is turned on at this DLCI. For accounting data
collection and record generation to be turned on, the accountingOn
bit and at least one of the accountCollection bits in the
DataNetworkAddress component must be set to on.rw Enumeration .1.3.6.1.4.1.562.36.2.1.71.5.4.11.1.8 |
mscFrUniDlciSpRaSensitivityThis attribute specifies the sensitivity of the rate adaptation system.
A higher number indicates a higher sensitivity and therefore a
quicker reaction time to network conditions. A quicker reaction
time allows the network to discard frames at the access and protect
network resources, but can lead to false alarms and a greater
fluctuation of the allowed rate. A higher setting therefore tends to
favour the protection of the network over the allowed throughput of
the user.
A lower number indicates a lower sensitivity and therefore a slower
reaction to network conditions. A slower reaction time results in a
greater amount of user traffic allowed into the network, but can lead
to a waste of network bandwidth since the traffic may be discarded
at the congested resource. A lower setting therefore tends to favour
the allowed throughput of the user over the protection of the
network.
This attribute is applicable for adapting EIR when rateAdaptation is
eirOnly or cirProportionate, or CIR when rateAdaptation is on.
This attribute is ignored if rateAdaptation is turned off.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.5.4.11.1.9 |
mscFrUniDlciSpUpdateBCIThis attribute specifies whether internal Backward Congestion
Indication (BCI) bits will report congestion external to the Passport
network, as communicated through incoming BECN bits.
If updateBCI is set to on, then BCI bits for incoming frames will be
set if the BECN on the frame is set. If updatBCI is set to off, then
incoming BECN bits will have no effect.
Setting updateBCI on for a DLCI means that the remote end of the
DLCI, which is specified by the remotedna and remotedlci attributes
of the dc component of the dlci, may perform Rate Adaptation
using the flow of incoming BECN bits, in addition to internal
Passport congestion management systems.
If the rateAdaptation attribute of the remote dlci is provisioned as
eirOnly, cirProportionate, or on, then congestion from another
network connected to a Passport network may trigger dynamic
congestion management. If the rateAdaptation attribute of the
remote dlci is provisioned to off, then the setting of updateBCI
attribute here will have no effect..rw Enumeration .1.3.6.1.4.1.562.36.2.1.71.5.4.11.1.10 |
mscFrUniDlciLb OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.71.5.5 |
mscFrUniDlciLbRowStatusTableThis entry controls the addition and deletion of
mscFrUniDlciLb components. SEQUENCE OF MscFrUniDlciLbRowStatusEntry .1.3.6.1.4.1.562.36.2.1.71.5.5.1 |
mscFrUniDlciLbRowStatusEntryA single entry in the table represents a single
mscFrUniDlciLb component. MscFrUniDlciLbRowStatusEntry .1.3.6.1.4.1.562.36.2.1.71.5.5.1.1 |
mscFrUniDlciLbRowStatusThis variable is used as the basis for SNMP naming of
mscFrUniDlciLb components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.71.5.5.1.1.1 |
mscFrUniDlciLbComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.71.5.5.1.1.2 |
mscFrUniDlciLbStorageTypeThis variable represents the storage type value for the
mscFrUniDlciLb tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.71.5.5.1.1.4 |
mscFrUniDlciLbIndexThis variable represents the index for the mscFrUniDlciLb tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.71.5.5.1.1.10 |
mscFrUniDlciLbStatsTableThis group contains all the statistics for the data loopback tool. SEQUENCE OF MscFrUniDlciLbStatsEntry .1.3.6.1.4.1.562.36.2.1.71.5.5.10 |
mscFrUniDlciLbStatsEntryAn entry in the mscFrUniDlciLbStatsTable. MscFrUniDlciLbStatsEntry .1.3.6.1.4.1.562.36.2.1.71.5.5.10.1 |
mscFrUniDlciLbLocalTotalFrmThis attribute records the number of frames looped back to the link
since loopback was last started.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.5.5.10.1.1 |
mscFrUniDlciLbLocalTotalBytesThis attribute records the number of bytes looped back to the link
since loopback mode was started.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.5.5.10.1.2 |
mscFrUniDlciLbLocalFecnFrmThis attribute records the number of frames with the Forward
Explicit Congestion Notification (FECN) bit set, looped back to the
link since the loopback mode was started.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.5.5.10.1.3 |
mscFrUniDlciLbLocalBecnFrmThis attribute records the number of frames with the Backward
Explicit Congestion Notification (BECN) bit set, looped back to the
link since the loopback mode was started.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.5.5.10.1.4 |
mscFrUniDlciLbLocalDeFrmThis attribute records the number of frames with the Discard
Eligibility (DE) bit set, looped back to the link since the loopback
mode was started.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.5.5.10.1.5 |
mscFrUniDlciLbLocalDeBytesThis attribute records the number of bytes in frames with the
Discard Eligibility (DE) bit set, looped back to the link since the
loopback mode was started.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.5.5.10.1.6 |
mscFrUniDlciLbRemoteTotalFrmThis attribute records the number of frames looped back to the
subnet since loopback was last started.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.5.5.10.1.7 |
mscFrUniDlciLbRemoteTotalBytesThis attribute records the number of bytes looped back to the subnet
since loopback was last started.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.5.5.10.1.8 |
mscFrUniDlciLbRemoteFecnFrmThis attribute records the number of frames with the Forward
Explicit Congestion Notification (FECN) bit set, looped back to the
subnet since the loopback mode was started.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.5.5.10.1.9 |
mscFrUniDlciLbRemoteBecnFrmThis attribute records the number of frames with the Backward
Explicit Congestion Notification (BECN) bit set, looped back to the
subnet since the loopback mode was started.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.5.5.10.1.10 |
mscFrUniDlciLbRemoteDeFrmThis attribute records the number of frames with the Discard
Eligibility (DE) bit set, looped back to the subnet since the
loopback mode was started.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.5.5.10.1.13 |
mscFrUniDlciLbRemoteDeBytesThis attribute records the number of bytes in frames with the
Discard Eligibility (DE) bit set, looped back to the subnet since the
loopback mode was started.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.5.5.10.1.14 |
mscFrUniDlciEgressSp OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.71.5.6 |
mscFrUniDlciEgressSpRowStatusTableThis entry controls the addition and deletion of
mscFrUniDlciEgressSp components. SEQUENCE OF MscFrUniDlciEgressSpRowStatusEntry .1.3.6.1.4.1.562.36.2.1.71.5.6.1 |
mscFrUniDlciEgressSpRowStatusEntryA single entry in the table represents a single
mscFrUniDlciEgressSp component. MscFrUniDlciEgressSpRowStatusEntry .1.3.6.1.4.1.562.36.2.1.71.5.6.1.1 |
mscFrUniDlciEgressSpRowStatusThis variable is used as the basis for SNMP naming of
mscFrUniDlciEgressSp components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.71.5.6.1.1.1 |
mscFrUniDlciEgressSpComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.71.5.6.1.1.2 |
mscFrUniDlciEgressSpStorageTypeThis variable represents the storage type value for the
mscFrUniDlciEgressSp tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.71.5.6.1.1.4 |
mscFrUniDlciEgressSpIndexThis variable represents the index for the mscFrUniDlciEgressSp tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.71.5.6.1.1.10 |
mscFrUniDlciEgressSpProvTableThis group contains the provisionable attributes for this component. SEQUENCE OF MscFrUniDlciEgressSpProvEntry .1.3.6.1.4.1.562.36.2.1.71.5.6.10 |
mscFrUniDlciEgressSpProvEntryAn entry in the mscFrUniDlciEgressSpProvTable. MscFrUniDlciEgressSpProvEntry .1.3.6.1.4.1.562.36.2.1.71.5.6.10.1 |
mscFrUniDlciEgressSpCommittedInformationRateThis attribute specifies the committed information rate (CIR) for the
egress direction. It is used for Call Admission Control (CAC) at the
egress link.
If the value is set to sameAsSp, the value of this attribute is the
same as the committedInformationRate attribute under the
ServiceParameters component.
VALUES (
50000001 = sameAsServiceParameters
)rw Unsigned32 (0..50000000 | 50000001) .1.3.6.1.4.1.562.36.2.1.71.5.6.10.1.1 |
mscFrUniDlciEgressSpCommittedBurstSizeThis attribute specifies the committed burst size (Bc) for the egress
direction. It is used for performing Call Admission Control (CAC)
at the egress link.
If the value is set to sameAsSp, the value of this attribute is the
same as the committedBurstSize attribute under the
ServiceParameters component.
VALUES (
50000001 = sameAsServiceParameters
)rw Unsigned32 (0..50000000 | 50000001) .1.3.6.1.4.1.562.36.2.1.71.5.6.10.1.2 |
mscFrUniDlciEgressSpExcessBurstSizeThis attribute specifies the excess burst size (Be) for the egress
direction. It is used for Call Admission Control (CAC) function
towards the egress link.
If the value is set to sameAsSp, the value of this attribute is the
same as the excessBurstSize attribute under the ServiceParameters
component.
VALUES (
50000001 = sameAsServiceParameters
)rw Unsigned32 (0..50000000 | 50000001) .1.3.6.1.4.1.562.36.2.1.71.5.6.10.1.3 |
mscFrUniDlciEgressSpMeasurementIntervalThis attribute specifies the time interval over which rates and burst
sizes are measured in the egress direction. It is used for bandwidth
reservation for Call Admission Control (CAC) towards the egress
link.
If the value is set to sameAsSp, the value of this attribute is the
same as the measurementInterval attribute under the
ServiceParameters component.
VALUES (
25501 = sameAsServiceParameters
)rw Unsigned32 (0..25500 | 25501) .1.3.6.1.4.1.562.36.2.1.71.5.6.10.1.4 |
mscFrUniDlciStateTableThis group contains the three OSI State attributes and the six OSI
Status attributes. The descriptions generically indicate what each
attribute implies about the component. Note that not all the values
and state combinations described here are supported by every
component which uses this group. For component-specific
information and the valid state combinations, refer to NTP 241-
7001-150, Passport Operations and Maintenance Guide. SEQUENCE OF MscFrUniDlciStateEntry .1.3.6.1.4.1.562.36.2.1.71.5.10 |
mscFrUniDlciStateEntryAn entry in the mscFrUniDlciStateTable. MscFrUniDlciStateEntry .1.3.6.1.4.1.562.36.2.1.71.5.10.1 |
mscFrUniDlciAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.71.5.10.1.1 |
mscFrUniDlciOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.71.5.10.1.2 |
mscFrUniDlciUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.71.5.10.1.3 |
mscFrUniDlciAvailabilityStatusIf supported by the component, this attribute indicates the OSI
Availability status of the component. Note that, even though it is
defined as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value inTest indicates that the resource is undergoing a test
procedure. If adminState is locked or shuttingDown, the normal
users are precluded from using the resource and controlStatus is
reservedForTest. Tests that do not exclude additional users can be
present in any operational or administrative state but the
reservedForTest condition should not be present.
The value failed indicates that the component has an internal fault
that prevents it from operating. The operationalState is disabled.
The value dependency indicates that the component cannot operate
because some other resource on which it depends is unavailable.
The operationalState is disabled.
The value powerOff indicates the resource requires power to be
applied and it is not powered on. The operationalState is disabled.
The value offLine indicates the resource requires a routine
operation (either manual, automatic, or both) to be performed to
place it on-line and make it available for use. The operationalState
is disabled.
The value offDuty indicates the resource is inactive in accordance
with a predetermined time schedule. In the absence of other
disabling conditions, the operationalState is enabled or disabled.
The value degraded indicates the service provided by the
component is degraded in some way, such as in speed or operating
capacity. However, the resource remains available for service. The
operationalState is enabled.
The value notInstalled indicates the resource is not present. The
operationalState is disabled.
The value logFull is not used.
Description of bits:
inTest(0)
failed(1)
powerOff(2)
offLine(3)
offDuty(4)
dependency(5)
degraded(6)
notInstalled(7)
logFull(8)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.71.5.10.1.4 |
mscFrUniDlciProceduralStatusIf supported by the component, this attribute indicates the OSI
Procedural status of the component. Note that, even though it is
defined as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value initializationRequired indicates (for a resource which
doesn't initialize autonomously) that initialization is required before
it can perform its normal functions, and this procedure has not been
initiated. The operationalState is disabled.
The value notInitialized indicates (for a resource which does
initialize autonomously) that initialization is required before it can
perform its normal functions, and this procedure has not been
initiated. The operationalState may be enabled or disabled.
The value initializing indicates that initialization has been initiated
but is not yet complete. The operationalState may be enabled or
disabled.
The value reporting indicates the resource has completed some
processing operation and is notifying the results. The
operationalState is enabled.
The value terminating indicates the component is in a termination
phase. If the resource doesn't reinitialize autonomously,
operationalState is disabled; otherwise it is enabled or disabled.
Description of bits:
initializationRequired(0)
notInitialized(1)
initializing(2)
reporting(3)
terminating(4)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.71.5.10.1.5 |
mscFrUniDlciControlStatusIf supported by the component, this attribute indicates the OSI
Control status of the component. Note that, even though it is defined
as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value subjectToTest indicates the resource is available but tests
may be conducted simultaneously at unpredictable times, which
may cause it to exhibit unusual characteristics.
The value partOfServicesLocked indicates that part of the service is
restricted from users of a resource. The adminState is unlocked.
The value reservedForTest indicates that the component is
administratively unavailable because it is undergoing a test
procedure. The adminState is locked.
The value suspended indicates that the service has been
administratively suspended.
Description of bits:
subjectToTest(0)
partOfServicesLocked(1)
reservedForTest(2)
suspended(3)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.71.5.10.1.6 |
mscFrUniDlciAlarmStatusIf supported by the component, this attribute indicates the OSI
Alarm status of the component. Note that, even though it is defined
as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value underRepair indicates the component is currently being
repaired. The operationalState is enabled or disabled.
The value critical indicates one or more critical alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value major indicates one or more major alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value minor indicates one or more minor alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value alarmOutstanding generically indicates that an alarm of
some severity is outstanding against the component.
Description of bits:
underRepair(0)
critical(1)
major(2)
minor(3)
alarmOutstanding(4)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.71.5.10.1.7 |
mscFrUniDlciStandbyStatusIf supported by the component, this attribute indicates the OSI
Standby status of the component.
The value notSet indicates that either the attribute is not supported
or that none of the status conditions described below are present.
Note that this is a non-standard value, used because the original
specification indicated this attribute was set-valued and thus, did not
provide a value to indicate that none of the other three are
applicable.
The value hotStandby indicates that the resource is not providing
service but will be immediately able to take over the role of the
resource to be backed up, without initialization activity, and
containing the same information as the resource to be backed up.
The value coldStandby indicates the resource is a backup for
another resource but will not be immediately able to take over the
role of the backed up resource and will require some initialization
activity.
The value providingService indicates that this component, as a
backup resource, is currently backing up another resource.ro Enumeration .1.3.6.1.4.1.562.36.2.1.71.5.10.1.8 |
mscFrUniDlciUnknownStatusThis attribute indicates the OSI Unknown status of the component.
The value false indicates that all of the other OSI State and Status
attribute values can be considered accurate.
The value true indicates that the actual state of the component is not
known for sure.ro Enumeration .1.3.6.1.4.1.562.36.2.1.71.5.10.1.9 |
mscFrUniDlciAbitTableThis group contains the A-Bit status information for this Data Link
Connection Identifier. SEQUENCE OF MscFrUniDlciAbitEntry .1.3.6.1.4.1.562.36.2.1.71.5.12 |
mscFrUniDlciAbitEntryAn entry in the mscFrUniDlciAbitTable. MscFrUniDlciAbitEntry .1.3.6.1.4.1.562.36.2.1.71.5.12.1 |
mscFrUniDlciABitStatusToIfThis attribute is the most recent A-bit status sent to the interface.
The A-bit status is part of the LMI protocol, and indicates
willingness to accept data from the local interface.
inactive - the Frame Relay service discards all data offered from the
local interface.
active - the Frame Relay service tries to process all data offered
from the local interface.
notApplicable - the DLCI is switched, so this attribute is ignored.ro Enumeration .1.3.6.1.4.1.562.36.2.1.71.5.12.1.1 |
mscFrUniDlciABitReasonToIfThis attribute provides the reason (if any) for an inactive status to
be sent to the interface. This reason is notApplicable for an active
status.ro Enumeration .1.3.6.1.4.1.562.36.2.1.71.5.12.1.2 |
mscFrUniDlciABitStatusFromIfThis attribute is the most recent A-Bit status received from the
interface.
inactive - the Frame Relay service informs the remote DLCI not to
send user data to this interface.
active - the Frame Relay service informs the remote DLCI that it is
okay to send user data to this interface.
notApplicable - the DLCI is switched, so this attribute is ignored.ro Enumeration .1.3.6.1.4.1.562.36.2.1.71.5.12.1.3 |
mscFrUniDlciABitReasonFromIfThis attribute provides the reason (if any) for an inactive status to
be sent to the subnet. This reason is notApplicable for an active
status.ro Enumeration .1.3.6.1.4.1.562.36.2.1.71.5.12.1.4 |
mscFrUniDlciLoopbackStateThis attribute has the value on when the DLCI is in loopback mode
and off otherwise. The loopback command verbs start and stop are
used to initiate and terminate the loopback mode for a DLCI. While
loopbackState is on, the local LMI will report to the interface the A-
bit status as active. Also an active A-bit signal will be reliably
propagated across the subnet to the remote DLCI.ro Enumeration .1.3.6.1.4.1.562.36.2.1.71.5.12.1.5 |
mscFrUniDlciCalldTableThis group of attributes describes the characteristics of the call such
as call type and call state. SEQUENCE OF MscFrUniDlciCalldEntry .1.3.6.1.4.1.562.36.2.1.71.5.13 |
mscFrUniDlciCalldEntryAn entry in the mscFrUniDlciCalldTable. MscFrUniDlciCalldEntry .1.3.6.1.4.1.562.36.2.1.71.5.13.1 |
mscFrUniDlciCallTypeThis attribute indicates whether this DLCI is a permancent virtual
circuit (PVC), a switched virtual circuit (SVC) or a switched
permament virtual circuit (SPVC).ro Enumeration .1.3.6.1.4.1.562.36.2.1.71.5.13.1.1 |
mscFrUniDlciQstateThis attribute indicates the FRF.4 state of an SVC call. The value of
this attribute for a permanent (PVC and P-SPVC) DLCI is always
notApplicable. In the description that follows, 'local' refers to the
user who has initiated the SETUP request, and 'remote' refers to
the user to whom the local user wishes to connect.
State description:
In the null state, the network has neither received nor sent call setup
requests for this DLCI.
In the callInitiated state, the network has received a SETUP
message from the local user.
In the outgoingCallProceeding state, the network has sent a CALL
PROCEEDING message to the local user in response to the SETUP
message.
In the callPresent state, the network has sent a SETUP message to
the remote user.
In the incomingCallProceeding state, the network has received a
CALL PROCEEDING message from the remote user in response to
a SETUP message.
In the active state, either the network has sent a CONNECT
message to the local user, or the network has received a CONNECT
from the remote user.
In the disconnectRequest state, the network has received a
DISCONNECT message from the local user.
In the disconnectIndication state, the network has sent a
DISCONNECT to the local user.
In the releaseRequest state, the network has sent out a RELEASE
message to the local user.
In the restartRequest state, the network has sent a RESTART
request to the local user and is waiting for an acknowledgement.
In the restart state, the network has received a request for a restart
from the local user and the network has not returned an
acknowledgement.ro Enumeration .1.3.6.1.4.1.562.36.2.1.71.5.13.1.2 |
mscFrUniDlciCallrefThis attribute indicates the FRF.4 call reference number associated
with this DLCI. The value of this attribute for a provisioned (PVC
or P-SPVC) DLCI is always 0.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.5.13.1.3 |
mscFrUniDlciSpOpTableThis group defines the service and traffic parameters specific to this
instance of DLCI. For permanent (PVC and P-SPVC) DLCIs, the
values of attributes with the exception of the measurementInterval
should be identical to those in the group
FrsDataLinkConnectionProv under the
FrsUniServiceParametersProv component. For switched (SVC)
DLCIs, the values of attributes may be different from the values
provisioned under the FrUni Sig component, if signaling
negotiations have ocurred to alter the service parameters. SEQUENCE OF MscFrUniDlciSpOpEntry .1.3.6.1.4.1.562.36.2.1.71.5.14 |
mscFrUniDlciSpOpEntryAn entry in the mscFrUniDlciSpOpTable. MscFrUniDlciSpOpEntry .1.3.6.1.4.1.562.36.2.1.71.5.14.1 |
mscFrUniDlciMaximumFrameSizeThis attribute indicates the maximum number of octets which may
be included in the information field. The frame relay header and
CRC octets are not included in this definition. This attribute
corresponds to the dN1 parameter described in the Vendor Forum
Specification.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.5.14.1.1 |
mscFrUniDlciRateEnforcementThis attribute is obsolete. It provided the information which is now
represented by the provisionable attribute rateEnforcement under
the ServiceParameters component.roobsolete Enumeration .1.3.6.1.4.1.562.36.2.1.71.5.14.1.2 |
mscFrUniDlciCommittedInformationRateThis attribute indicates the committed information rate (CIR) in bits
per second (bit/s). When rateEnforcement is set to on, cir is the rate
at which the network agrees to transfer information under normal
conditions. This rate is measured over a measurement interval (t)
that is determined internally based on CIR and the committed burst
size (Bc). An exception to this occurs when CIR is provisioned to
be zero, in which case the measurement interval (t) must be
provisioned explicitly.
This attribute should be ignored when rateEnforcement is off.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.5.14.1.3 |
mscFrUniDlciCommittedBurstSizeThis attribute indicates the committed burst size (Bc) in bits. bc is
the amount of data that a network agrees to transfer under normal
conditions over a measurement interval (t). Data marked DE=1 is
not accounted for in Bc.
This attribute should be ignored when rateEnforcement is off.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.5.14.1.4 |
mscFrUniDlciExcessBurstSizeThis attribute indicates the excess burst size (Be) in bits. Be is the
amount of uncommitted data that the network will attempt to deliver
over measurement interval T. Data marked DE=1 by the user or by
the network is accounted for here.
This attribute should be ignored when rateEnforcement is off.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.5.14.1.5 |
mscFrUniDlciMeasurementIntervalThis attribute indicates the time interval (in milliseconds) over
which rates and burst sizes are measured.
This attribute should be ignored when rateEnforcement is off.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.5.14.1.6 |
mscFrUniDlciRateAdaptationThis attribute is obsolete. It provided the information which is now
represented by the provisionable attribute rateAdaptation under the
ServiceParameters component.roobsolete Enumeration .1.3.6.1.4.1.562.36.2.1.71.5.14.1.7 |
mscFrUniDlciAccountingThis attribute indicates whether accounting data collection and
record generation is turned on at this DLCI. For accounting data
collection and record generation to be turned on, the accountingOn
bit and at least one of the accountCollection bits in the
DataNetworkAddress component must be set to on.ro Enumeration .1.3.6.1.4.1.562.36.2.1.71.5.14.1.8 |
mscFrUniDlciEmissionPriorityToIfThis attribute indicates the emission priority of frames sent to the
interface. A larger value denotes a higher priority.ro INTEGER (0 | 1 | 2 | 3) .1.3.6.1.4.1.562.36.2.1.71.5.14.1.9 |
mscFrUniDlciTransferPriToNwkThis attribute indicates the priority at which data is transferred to
the network.
The transfer priority is a preference configured for an application
according to its delay-sensitivity requirement. Frames with higher
transfer priority are served by the network before the frames with
lower priority. The transfer priority standard is defined to have 16
indices from 0 to 15.
Each transfer priority n, where n specifies the transfer priority
index, contains a default setting for routing class of service
(multimedia, delay, or throughput) and frame relay egress queue
(depending on the number of supported egress queues on the remote
end interface) specified by the routingClassOfService and
emissionPriority attributes provisioned in the Mod Frs DprsNet
Tpm/n component. The default mapping can be altered by a user if
required.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.5.14.1.10 |
mscFrUniDlciTransferPriFromNwkThis attribute indicates the priority at which data is transferred from
the network.
The transfer priority is a preference configured for an application
according to its delay-sensitivity requirement. Frames with higher
transfer priority are served by the network before the frames with
lower priority. The transfer priority standard is defined to have 16
indices from 0 to 15.
Each transfer priority n, where n specifies the transfer priority
index, contains a default setting for routing class of service
(multimedia, delay, or throughput) and frame relay egress queue
(depending on the number of supported egress queues on the remote
end interface) specified by the routingClassOfService and
emissionPriority attributes provisioned in the Mod Frs DprsNet
Tpm/n component. The default mapping can be altered by a user if
required.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.5.14.1.11 |
mscFrUniDlciStatsTableThis group contains the operational statistics for the Frame Relay
Data Link Connection Identifier. SEQUENCE OF MscFrUniDlciStatsEntry .1.3.6.1.4.1.562.36.2.1.71.5.15 |
mscFrUniDlciStatsEntryAn entry in the mscFrUniDlciStatsTable. MscFrUniDlciStatsEntry .1.3.6.1.4.1.562.36.2.1.71.5.15.1 |
mscFrUniDlciFrmToIfThis attribute counts the frames sent out the interface. When the
maximum count is reached the count wraps to zero.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.5.15.1.1 |
mscFrUniDlciFecnFrmToIfThis attribute counts the frames sent to the interface with the
Forward Explicit Congestion Notification (FECN) bit set. When the
count reaches maximum it wraps to zero.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.5.15.1.2 |
mscFrUniDlciBecnFrmToIfThis attribute counts the frames sent to the interface with the
Backward Explicit Congestion Notification (BECN) bit set. When
the count reaches maximum it wraps to zero.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.5.15.1.3 |
mscFrUniDlciBciToSubnetThis attribute counts the frames sent into the local network with the
Backward Congestion Indication (BCI) bit set. When the count
reaches maximum it wraps to zero.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.5.15.1.4 |
mscFrUniDlciDeFrmToIfThis attribute counts the frames sent to the interface with the
Discard Eligibility (DE) bit set. When the count reaches maximum
it wraps to zero.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.5.15.1.5 |
mscFrUniDlciDiscCongestedToIfThis attribute counts the number of frame discards at the Frame
Relay service due to local congestion in the direction toward the
interface. When this count reaches maximum, it wraps to zero.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.5.15.1.6 |
mscFrUniDlciDiscDeCongestedToIfThis attribute counts the number of discarded frames, with the
Discard Eligibility (DE) bit set, at the Frame Relay service, due to
local congestion in the direction toward the interface. When this
count reaches maximum, it wraps to zero.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.5.15.1.7 |
mscFrUniDlciFrmFromIfThis attribute counts the frames received from the interface. It
includes the frames that are discarded due to error or excess. When
the maximum count is reached the count wraps to zero.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.5.15.1.8 |
mscFrUniDlciFecnFrmFromIfThis attribute counts the frames received from the interface with the
Forward Explicit Congestion Notification (FECN) bit set. When the
count reaches maximum it wraps to zero.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.5.15.1.9 |
mscFrUniDlciBecnFrmFromIfThis attribute counts the frames received from the interface with the
Backward Explicit Congestion Notification (BECN) bit set. When
the count reaches maximum it wraps to zero.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.5.15.1.10 |
mscFrUniDlciFciFromSubnetThis attribute counts the frames received from the network with the
Forward Congestion Indication (FCI) bit set. When the count
reaches maximum it wraps to zero.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.5.15.1.11 |
mscFrUniDlciBciFromSubnetThis attribute counts the frames received from the network with the
Backward Congestion Indication (BCI) bit set. When the count
reaches maximum it wraps to zero.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.5.15.1.12 |
mscFrUniDlciDeFrmFromIfThis attribute counts the frames received from the interface with the
Discard Eligibility (DE) bit set. When the count reaches maximum
it wraps to zero.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.5.15.1.13 |
mscFrUniDlciExcessFrmFromIfThis attribute counts the frames received from the interface with the
Discard Eligibility (DE) bit clear, but subsequently set by the
network due to rate enforcement. When the count reaches
maximum it wraps to zero.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.5.15.1.14 |
mscFrUniDlciDiscExcessFromIfThis attribute counts the frames which were discarded due to rate
enforcement. When the count reaches maximum it wraps to zero.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.5.15.1.15 |
mscFrUniDlciDiscFrameAbitThis attribute counts the number of frame discards at the Frame
Relay Service, due to an inactive PVC status, in the direction
toward the local network. When this count reaches maximum, it
wraps to zero.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.5.15.1.16 |
mscFrUniDlciDiscCongestedFromIfThis attribute counts the number of frame discards at the Frame
Relay service due to local congestion in the direction toward the
network. When this count reaches maximum, it wraps to zero.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.5.15.1.17 |
mscFrUniDlciDiscDeCongestedFromIfThis attribute counts the number of discarded frames, with the
Discard Eligibility (DE) bit set, at the Frame Relay service, due to
local congestion, in the direction toward the local network. When
this count reaches maximum, it wraps to zero.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.5.15.1.18 |
mscFrUniDlciErrorShortFrmFromIfThis attribute counts the frames received with 0 octets in the
information field. When the count reaches maximum it wraps to
zero.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.5.15.1.19 |
mscFrUniDlciErrorLongFrmFromIfThis attribute counts the frames received with number of octets in
the information field greater than the subscribed maximum. When
the count reaches maximum it wraps to zero. Frames whose lengths
are greater than the hardware receive buffer are ignored by the
hardware and are therefore not included in this count.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.5.15.1.20 |
mscFrUniDlciBecnFrmSetByServiceThis attribute counts the number of frames with BECN set by the
Frame Relay service. It is incremented whenever the Frame Relay
service sets BECN on a frame upon detecting local congestion. This
count is incremented regardless of whether the frame already bears
a set BECN bit since its use is to determine the place of congestion.
When the count reaches maximum, it wraps to zero.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.5.15.1.21 |
mscFrUniDlciBytesToIfThis attribute counts the bytes sent out the interface. When the
maximum count is reached the count wraps to zero.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.5.15.1.22 |
mscFrUniDlciDeBytesToIfThis attribute counts the bytes sent to the interface with the Discard
Eligibility (DE) bit set. When the count reaches maximum it wraps
to zero.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.5.15.1.23 |
mscFrUniDlciDiscCongestedToIfBytesThis attribute counts the number of byte discards at the Frame
Relay service due to local congestion in the direction toward the
link. When this count reaches maximum, it wraps to zero.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.5.15.1.24 |
mscFrUniDlciDiscDeCongestedToIfBytesThis attribute counts the number of discard eligible (DE=1) byte
discards at the Frame Relay service due to local congestion in the
direction toward the link. When the maximum count is reached the
count wraps to zero.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.5.15.1.25 |
mscFrUniDlciBytesFromIfThis attribute counts the bytes received from the interface. Bytes
that are discarded due to error or excess are not counted. When the
maximum count is reached the count wraps to zero.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.5.15.1.26 |
mscFrUniDlciDeBytesFromIfThis attribute counts the bytes received from the interface with the
Discard Eligibility (DE) bit set. When the count reaches maximum
it wraps to zero.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.5.15.1.27 |
mscFrUniDlciExcessBytesFromIfThis attribute counts the bytes received from the interface with the
Discard Eligibility (DE) bit clear, but subsequently set by the
network due to rate enforcement. When the count reaches
maximum it wraps to zero.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.5.15.1.28 |
mscFrUniDlciDiscExcessFromIfBytesThis attribute counts the bytes which were discarded due to rate
enforcement. When the count reaches maximum it wraps to zero.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.5.15.1.29 |
mscFrUniDlciDiscByteAbitThis attribute counts the bytes which were discarded due to aBit
turned off.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.5.15.1.30 |
mscFrUniDlciDiscCongestedFromIfBytesThis attribute counts the number of byte discards at the Frame
Relay service due to local congestion in the direction toward the
network. When this count reaches maximum, it wraps to zero.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.5.15.1.31 |
mscFrUniDlciDiscDeCongestedFromIfBytesThis attribute counts the number of discard eligible (DE=1) byte
discards at the Frame Relay service due to local congestion in the
direction toward the network. When the maximum count is reached
the count wraps to zero.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.5.15.1.32 |
mscFrUniDlciErrorShortBytesFromIfThis attribute counts the bytes received with 0 octets in the
information field. When the count reaches maximum it wraps to
zero.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.5.15.1.33 |
mscFrUniDlciErrorLongBytesFromIfThis attribute counts the bytes received with number of octets in the
information field greater than the subscribed maximum. When the
count reaches maximum it wraps to zero. Bytes whose lengths are
greater than the hardware receive buffer are ignored by the
hardware and are therefore not included in this count.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.5.15.1.34 |
mscFrUniDlciRateAdaptReductThis attribute counts the number of rate reductions due to rate
adaptation. Rate adaptation causes the allowed rate to be reduced in
steps. After each reduction, a period of time is awaited before
further action is taken. At the end of this period, the allowed rate is
further reduced if congestion is still prevalent. When this count
reaches maximum, it wraps to zero.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.5.15.1.35 |
mscFrUniDlciRateAdaptReductPeriodThis attribute provides a cumulative count of the amount of time
that rate adaptation procedures have been in effect. When this count
reaches maximum, it wraps to zero.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.5.15.1.36 |
mscFrUniDlciTransferPriorityToNetworkThis attribute is obsolete. It is replaced by attribute
transferPriorityToNetwork under group
FrsNniDataLinkConnectionIdentifierServiceParametersOp.roobsolete INTEGER .1.3.6.1.4.1.562.36.2.1.71.5.15.1.37 |
mscFrUniDlciTransferPriorityFromNetworkThis attribute is obsolete. It is replaced by attribute
transferPriorityFromNetwork under group
FrsNniDataLinkConnectionIdentifierServiceParametersOp.roobsolete INTEGER .1.3.6.1.4.1.562.36.2.1.71.5.15.1.38 |
mscFrUniDlciCirPresentThis attribute provides the actual Committed Information Rate
(CIR) enforced for this DLCI. This number is in units of 800 bits/
sec, since that is the internal resolution of Passport rate
enforcement. If rateEnforcement is off, then this number does not
have meaning. Normally, this attribute matches the provisioned CIR
for the DLCI. But when Rate Adaptation is active, then this number
will vary to represent the actual Allowed CIR at the moment that
this attribute is collected.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.5.15.1.39 |
mscFrUniDlciEirPresentThis attribute provides the actual Excess Information Rate (EIR)
enforced for this DLCI. This number is in units of 800 bits/sec,
since that is the internal resolution of Passport rate enforcement. If
rateEnforcement is off, then this number does not have meaning.
Normally, this attribute matches the provisioned EIR for the DLCI.
But when Rate Adaptation is active, then this number will vary to
represent the actual Allowed EIR at the moment that this attribute is
collected.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.5.15.1.40 |
mscFrUniDlciIntTableThis group contains the operational statistics for the Frame Relay
Data Link Connection Identifier interval data (accounting data). SEQUENCE OF MscFrUniDlciIntEntry .1.3.6.1.4.1.562.36.2.1.71.5.16 |
mscFrUniDlciIntEntryAn entry in the mscFrUniDlciIntTable. MscFrUniDlciIntEntry .1.3.6.1.4.1.562.36.2.1.71.5.16.1 |
mscFrUniDlciStartTimeThis attribute indicates the start time of this interval period. If Vc
spans 12 hour time or time of day change startTime reflects new
time as recorded at 12 hour periods or time of day changes. A new
interval period is started each time an accounting record is
generated.ro EnterpriseDateAndTime .1.3.6.1.4.1.562.36.2.1.71.5.16.1.1 |
mscFrUniDlciTotalIngressBytesThis attribute counts the total bytes received from the interface
since the start of the interval period. The start of the interval period
is captured in the startTime attribute. The count is reset to zero
when an accounting record is generated.ro Unsigned64 .1.3.6.1.4.1.562.36.2.1.71.5.16.1.2 |
mscFrUniDlciTotalEgressBytesThis attribute counts the total bytes sent to the interface since the
start of the interval period. The start of the interval period is
captured in the startTime attribute. The count is reset to zero when
an accounting record is generated.ro Unsigned64 .1.3.6.1.4.1.562.36.2.1.71.5.16.1.3 |
mscFrUniDlciEirIngressBytesThis attribute counts the total bytes with the Discard Eligibility
(DE) bit set sent to the subnet since the start of the interval period.
The start of the interval period is captured in the startTime attribute.
The count is reset to zero when an accounting record is generated.ro Unsigned64 .1.3.6.1.4.1.562.36.2.1.71.5.16.1.4 |
mscFrUniDlciEirEgressBytesThis attribute counts the total bytes with the Discard Eligibility
(DE) bit set sent to the interface since the start of the interval
period. The start of the interval period is captured in the startTime
attribute. The count is reset to zero when an accounting record is
generated.ro Unsigned64 .1.3.6.1.4.1.562.36.2.1.71.5.16.1.5 |
mscFrUniDlciDiscardedBytesThis attribute counts the total bytes in invalid frames received from
the interface and discarded at the DLCI since the start of the interval
period. This count is a sum of octets in frames discarded due to the
number of octets in the information field greater than the subscribed
maximum or equal to 0, due to aBit turned off, or due to rate
enforcement. The start of the interval period is captured in the
startTime attribute. The count is reset to zero when an accounting
record is generated.ro Unsigned64 .1.3.6.1.4.1.562.36.2.1.71.5.16.1.6 |
mscFrUniDlciTotalIngressSegFrmIf the value of the unitsCounted attribute in moduleData component
is segments, this attribute counts the total number of segments in
frames received from the interface since the start of the interval
period. If the value of the unitsCounted attribute in moduleData
component is frames, this attribute counts the total number of
frames received from the interface since the start of the interval
period. The start of the interval period is captured in the startTime
attribute. The count is reset to zero when an accounting record is
generated.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.5.16.1.7 |
mscFrUniDlciTotalEgressSegFrmIf the value of the unitsCounted attribute in moduleData component
is segments, this attribute counts the total number of segments in
frames sent to the interface since the start of the interval period. If
the value of the unitsCounted attribute in moduleData component is
frames, this attribute counts the total number of frames sent to the
interface since the start of the interval period. The start of the
interval period is captured in the startTime attribute. The count is
reset to zero when an accounting record is generated.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.5.16.1.8 |
mscFrUniDlciEirIngressSegFrmIf the value of the unitsCounted attribute in moduleData component
is segments, this attribute counts the number of segments in frames
with the Discard Eligibility (DE) bit set sent to the subnet since the
start of the interval period. If the value of the unitsCounted attribute
in moduleData component is frames, this attribute counts the
number of frames with the Discard Eligibility (DE) bit set sent to
the subnet since the start of the interval period. The start of the
interval period is captured in the startTime attribute. The count is
reset to zero when an accounting record is generated.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.5.16.1.9 |
mscFrUniDlciEirEgressSegFrmIf the value of the unitsCounted attribute in moduleData component
is segments, this attribute counts the number of segments in frames
with the Discard Eligibility (DE) bit set sent to the interface since
the start of the interval period. If the value of the unitsCounted
attribute in moduleData component is frames, this attribute counts
the number of frames with the Discard Eligibility (DE) bit set sent
to the interface since the start of the interval period. The start of the
interval period is captured in the startTime attribute. The count is
reset to zero when an accounting record is generated.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.5.16.1.10 |
mscFrUniDlciDiscardedSegFrmIf the value of the unitsCounted attribute in moduleData component
is segments, this attribute counts the number of segments in invalid
frames received from the interface and discarded at the DLCI. If the
value of the unitsCounted attribute in moduleData component is
frames, this attribute counts the number of invalid frames received
from the interface and discarded at the DLCI. Segments of frames
are counted since the start of the interval period. The count is reset
to zero when an accounting record is generated. The count is a sum
of segments in frames or frames discarded due to the number of
octets in the information field greater than the subscribed maximum
or equal to 0, due to aBit turned off, or due to rate enforcement.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.5.16.1.11 |
mscFrUniDlciCirPresentObsThis attribute has moved to the statistics subgroup. See cirPresent..roobsolete Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.5.16.1.12 |
mscFrUniDlciEirPresentObsThis attribute has moved to the statistics subgroup. See eirPresent.roobsolete Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.5.16.1.13 |
mscFrUniDlciRateEnforcementPresentThis attribute is obsolete. See the provisionable rateEnforcement
attribute.roobsolete Enumeration .1.3.6.1.4.1.562.36.2.1.71.5.16.1.14 |
mscFrUniDlciRateAdaptationPresentThis attribute is obsolete. See the provisionable rateAdaptation
attribute.roobsolete Enumeration .1.3.6.1.4.1.562.36.2.1.71.5.16.1.15 |
mscFrUniDlciLocalRateAdaptOccurredThis attribute indicates whether rate adaptation has occurred on this
user Data Link Connection on this Frame Relay interface. The value
is reset to no when an accounting record is generated.ro Enumeration .1.3.6.1.4.1.562.36.2.1.71.5.16.1.16 |
mscFrUniDlciCallReferenceNumberThis attribute is obsoleted and replaced by callRefNumber.roobsolete Hex .1.3.6.1.4.1.562.36.2.1.71.5.16.1.17 |
mscFrUniDlciElapsedDifferenceThis attribute indicates the elapsed time representing the period of
this interval data. It is elapsed time in 0.1 second increments since
the call started.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.5.16.1.18 |
mscFrUniDlciCallRefNumberThis attribute indicates the call reference number which is a unique
number generated by the switch.The same Call Reference Number
is stored in the interval data (accounting record) at both ends of the
call. It can be used as one of the attributes in matching duplicate
records generated at each end of the call.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.5.16.1.20 |
mscFrUniSig OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.71.6 |
mscFrUniSigRowStatusTableThis entry controls the addition and deletion of
mscFrUniSig components. SEQUENCE OF MscFrUniSigRowStatusEntry .1.3.6.1.4.1.562.36.2.1.71.6.1 |
mscFrUniSigRowStatusEntryA single entry in the table represents a single
mscFrUniSig component. MscFrUniSigRowStatusEntry .1.3.6.1.4.1.562.36.2.1.71.6.1.1 |
mscFrUniSigRowStatusThis variable is used as the basis for SNMP naming of
mscFrUniSig components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.71.6.1.1.1 |
mscFrUniSigComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.71.6.1.1.2 |
mscFrUniSigStorageTypeThis variable represents the storage type value for the
mscFrUniSig tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.71.6.1.1.4 |
mscFrUniSigIndexThis variable represents the index for the mscFrUniSig tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.71.6.1.1.10 |
mscFrUniSigRangeTableThis group contains the provisionable attribute to define the range
of DLCIs for PVCs and SVCs. The purpose of this range is to
prevent DLCI collisions between the provisioned PVCs and the
dynamic SVCs. SEQUENCE OF MscFrUniSigRangeEntry .1.3.6.1.4.1.562.36.2.1.71.6.11 |
mscFrUniSigRangeEntryAn entry in the mscFrUniSigRangeTable. MscFrUniSigRangeEntry .1.3.6.1.4.1.562.36.2.1.71.6.11.1 |
mscFrUniSigHighestPvcDlciThis attribute specifies the highest DLCI value that can be
provisioned for a PVC. It partitions the DLCI space into PVC and
SVC. PVC DLCI numbers higher than this value are rejected. The
value 0 is used to indicate that no PVCs are allowed on the
interface. The value 1007 indicates that no SVCs are allowed on the
interface.rwobsolete Unsigned32 (0 | 16..1007) .1.3.6.1.4.1.562.36.2.1.71.6.11.1.1 |
mscFrUniSigHighestPermanentDlciThis attribute specifies the highest DLCI value that can be
provisioned for a permanent connection. It partitions the DLCI
space into permanent and switched connections. Permanent DLCI
numbers higher than this value cannot be provisioned. The value 0
is used to indicate that no permanent connections are allowed on
this interface. The value 1007 indicates that no switched
connections are allowed on this interface.rwobsolete Unsigned32 (0 | 16..1007) .1.3.6.1.4.1.562.36.2.1.71.6.11.1.4 |
mscFrUniSigHighestFriPvcDlciThis attribute specifies the highest DLCI value that can be
provisioned for a permanent connection. It partitions the DLCI
space into permanent and switched connections. Permanent DLCI
numbers higher than this value cannot be provisioned. The value 0
is used to indicate that no permanent connections are allowed on
this interface. The value 1007 indicates that no switched
connections are allowed on this interface.rw Unsigned32 (0 | 16..1007) .1.3.6.1.4.1.562.36.2.1.71.6.11.1.5 |
mscFrUniSigServParmsTableThis group contains the provisionable FRF.4 service parameters. SEQUENCE OF MscFrUniSigServParmsEntry .1.3.6.1.4.1.562.36.2.1.71.6.12 |
mscFrUniSigServParmsEntryAn entry in the mscFrUniSigServParmsTable. MscFrUniSigServParmsEntry .1.3.6.1.4.1.562.36.2.1.71.6.12.1 |
mscFrUniSigMaximumAggregateSvcCirThis attribute specifies the maximum aggregate user to network
direction CIR allowed for SVCs on the interface. It is provisioned
as a percentage of the access link speed. This attribute is used to
limit the amount of guaranteed SVC throughput allowed into the
network at this interface.
This attribute is obsoleted, during the migration, the value of this
attribute will be transfered to maximumAggregateSvcCirNormalQ
or maximumAggregateSvcCirHighQ depending on the value of the
attribute outDefaultPathSensitivity under DNA component.rwobsolete Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.6.12.1.1 |
mscFrUniSigMaximumAggregateSvcEirThis attribute specifies the maximum aggregate user to network
direction EIR allowed for SVCs on the interface. It is provisioned as
a percentage of the access link speed. This attribute is ignored if
unlimitedAggregateEir, another attribute under the same group, is
set to yes. This attribute is used to limit the amount of excess SVC
throughput allowed into the network at this interface.
This attribute is obsoleted, during the migration, the value of this
attribute will be transfered to maximumAggregateSvcEirNormalQ
or maximumAggregateSvcEirHighQ depending on the value of the
attribute outDefaultPathSensitivity under DNA component.rwobsolete Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.6.12.1.2 |
mscFrUniSigMaximumFrameSizeThis attribute specifies the maximum number of octets that may be
included in the information field of the user DLCI of any switched
connections using this interface. Its value must not be smaller than
the value of defaultMaximumFrameSize.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.6.12.1.3 |
mscFrUniSigDefaultMaximumFrameSizeThis attribute specifies the default maximum number of octets that
may be included in the information field of the user DLCI assigned
for any switched connections using this interface. This value is used
during call parameter negotiation for switched calls on this interface
when the maximum frame size is not specified in the user's SETUP
message. The value of this attribute must not exceed the value of the
maximumFrameSize attribute.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.6.12.1.4 |
mscFrUniSigDefaultCommittedInformationRateThis attribute specifies the default user to network direction CIR.
This value is used during call parameter negotiation for switched
calls on this interface when the CIR is not specified in the user's
SETUP message.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.6.12.1.5 |
mscFrUniSigDefaultCommittedBurstSizeThis attribute specifies the default user to network direction Bc.
This value is used during call parameter negotiation for switched
calls on this interface when the Bc is not specified in the user's
SETUP message.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.6.12.1.6 |
mscFrUniSigDefaultExcessBurstSizeThis attribute specifies the default user to network direction Be.
This value is used during call parameter negotiation for switched
calls on this interface when the Be is not specified in the user's
SETUP message.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.6.12.1.7 |
mscFrUniSigUnlimitedAggregateEirThis attribute specifies whether the network will enforce aggregate
EIR during SVC call establishment. The network keeps track of the
sum of user to network EIRs for all the SVC DLCIs at this
interface.
If this attribute is set to no, then the requested EIR for each new
SVC call will be adjusted if the resulting aggregate EIR exceeds the
value contained in one of the following attributes (depending on the
requested Transfer Priority): maximumAggregateSvcEirNormalQ,
maximumAggregateSvcEirHighQ or
maximumAggregateSvcEirInterruptQ. This may lead to a rejection
of the call setup.
If this value is set to yes, then no checks will take place.rwobsolete Enumeration .1.3.6.1.4.1.562.36.2.1.71.6.12.1.8 |
mscFrUniSigRateEnforcementThis attribute specifies whether rate enforcement is in effect for
SVCs on this interface.rw Enumeration .1.3.6.1.4.1.562.36.2.1.71.6.12.1.9 |
mscFrUniSigRateAdaptationThis attribute specifies whether closed-loop rate adaptation is in
effect for SVCs on this interface. Rate adaptation is a feature that, in
periods of congestion, adapts the rate at which the user is allowed to
send data into the network to that which the network is able to
handle at that time. This proactive measure of handling congestion
optimizes network resources by causing the ingress to discard
frames that would otherwise be discarded in the network.
If this attribute is set to on, then, at the onset of congestion, the
excess information rate (EIR) is reduced to a very low rate. If
congestion persists, then the allowed CIR is reduced geometrically
by 25% of the current value at that time. The minimum to which
CIR can be reduced is 1/16th (6.25%) of the provisioned value. As
congestion alleviates, CIR is increased linearly by 6.25% of the
provisioned value specified in committedInformationRate.
If set to eirOnly, then rate adaptation will only apply to the excess
information rate (EIR). At the onset of congestion, the allowed EIR
is reduced by 25% of its provisioned value. If congestion persists,
EIR is reduced geometrically by 25% of the current value at that
time. As congestion alleviates, EIR is gradually increased linearly
by 6.25% of the provisioned EIR.
If set to cirProportionate, then rate adaptation will also only apply
to the excess information rate (EIR). At the onset of congestion the
initial allowed EIR is set to a multiple of the provisioned CIR. If
congestion persists, the allowed EIR is reduced geometrically by
25% of the current value at that time. As congestion alleviates, EIR
is gradually increased linearly by 6.25% of the provisioned EIR.
Note that the allowed EIR may be set higher than the provisioned
EIR, since it is calculated initially using another parameter, the
provisioned CIR. If the allowed EIR at the moment is higher than
the provisioned EIR, then the provisioned EIR is used instead.
This attribute can only be set to on or eirOnly if rateEnforcement is
set to on.rw Enumeration .1.3.6.1.4.1.562.36.2.1.71.6.12.1.10 |
mscFrUniSigMaximumAggregateSvcCirNormalQThis attribute specifies the maximum aggregate user to network
direction CIR allowed for SVCs on the interface. It is provisioned
as a percentage of the access link speed. This attribute is used to
limit, at this interface, the amount of guaranteed SVC throughput
allowed into the network through the normal priority queue.rwobsolete Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.6.12.1.11 |
mscFrUniSigMaximumAggregateSvcCirHighQThis attribute specifies the maximum aggregate user to network
direction CIR allowed for SVCs on the interface. It is provisioned
as a percentage of the link access speed. This attribute is used to
limit, at this interface, the amount of guaranteed SVC throughput
allowed into the network through the high priority queue.rwobsolete Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.6.12.1.12 |
mscFrUniSigMaximumAggregateSvcCirInterruptQThis attribute specifies the maximum aggregate user to network
direction CIR allowed for SVCs on the interface. It is provisioned
as a percentage of the link access speed. This attribute is used to
limit, at this interface, the amount of guaranteed SVC throughput
allowed into the network through the interrupting queue.rwobsolete Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.6.12.1.13 |
mscFrUniSigMaximumAggregateSvcEirNormalQThis attribute specifies the maximum aggregate user to network
direction EIR allowed for SVCs on the interface. It is provisioned as
a percentage of the access link speed. This attribute is ignored if
unlimitedAggregateEir, another attribute under the same group, is
set to yes. This attribute is used to limit, at this interface, the amount
of excess SVC throughput allowed into the network through the
normal priority queue.rwobsolete Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.6.12.1.14 |
mscFrUniSigMaximumAggregateSvcEirHighQThis attribute specifies the maximum aggregate user to network
direction EIR allowed for SVCs on the interface. It is provisioned as
a percentage of the access link speed. This attribute is ignored if
unlimitedAggregateEir, another attribute under the same group, is
set to yes. This attribute is used to limit, at this interface, the amount
of excess SVC throughput allowed into the network through the
high priority queue.rwobsolete Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.6.12.1.15 |
mscFrUniSigMaximumAggregateSvcEirInterruptQThis attribute specifies the maximum aggregate user to network
direction EIR allowed for SVCs on the interface. It is provisioned as
a percentage of the access link speed. This attribute is ignored if
unlimitedAggregateEir, another attribute under the same group, is
set to yes. This attribute is used to limit, at this interface, the amount
of excess SVC throughput allowed into the network through the
interrupting queue.rwobsolete Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.6.12.1.16 |
mscFrUniSigX213IeHandlingThe x213IeHandling attribute specifies how Frame Relay handles
the X.213 Priority IE when it is in the FRF.4 setup message.
When the attribute is set to notSupported, the X.213 Priority IE will
not be recognized in the setup message. A FRF.4 status message
will be sent to the calling DTE, with the indication that an
unrecognized IE was encountered. The call setup then proceeds as
normal, and the X.213 Priority IE does not appear in the setup
message at the called end.
When the attribute is set to proprietary, and the X.213 Priority IE is
present in the FRF.4 setup message, it will be recognized. If there is
no Frame Transfer Priority IE in the setup message, the first data
byte of the X.213 Priority IE is used to select the transfer and
discard priority values for the connection and the X.213 Priority IE
is signaled to the called end in the setup message. If the Frame
Transfer Priority IE is present in the FRF.4 setup message, its value
is used to select the transfer priority, the discard priority is taken
from the FRUNI Dna component, and the X.213 Priority IE is
ignored.
Refer to the related Application Note for further details before
setting the attribute value to proprietary.rw Enumeration .1.3.6.1.4.1.562.36.2.1.71.6.12.1.17 |
mscFrUniSigRaSensitivityThis attribute specifies the sensitivity of the rate adaptation system
for all switched connections on this interface.
A higher number indicates a higher sensitivity and therefore a
quicker reaction time to network conditions. A quicker reaction
time allows the network to discard frames at the access and protect
network resources, but can lead to false alarms and a greater
fluctuation of the allowed rate. A higher setting therefore tends to
favor the protection of the network over the allowed throughput of
the user.
A lower number indicates a lower sensitivity and therefore a slower
reaction to network conditions. A slower reaction time results in a
greater amount of user traffic allowed into the network, but can lead
to a waste of network bandwidth since the traffic may be discarded
at the congested resource. A lower setting therefore tends to favour
the allowed throughput of the user over the protection of the
network.
This attribute is applicable for adapting EIR when rateAdaptation is
eirOnly or cirProportionate, or CIR when rateAdaptation is on.
This attribute is ignored if rateAdaptation is off.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.6.12.1.18 |
mscFrUniSigUpdateBCIThis attribute specifies whether internal Backward Congestion
Indication (BCI) bits will report congestion external to the Passport
network, as communicated through incoming BECN bits.
If updateBCI is set to on, then BCI bits for incoming frames will be
set if the BECN on the frame is set. If updateBCI is set to off, then
incoming BECN bits has no effect.
Setting updateBCI on for a DLCI means that the remote end of the
DLCI, which is specified by the remoteDna and remoteDlci
attributes of the Dc component of the Dlci, may perform Rate
Adaptation using the flow of incoming BECN bits, in addition to
internal Passport congestion management systems.
If the rateAdaptation attribute of the remote DLCI is provisioned as
eirOnly, cirProportionate, or on, then congestion from another
network connected to a Passport network may trigger dynamic
congestion management. If there is no rate adaptation at the other
end, then the setting of updateBCI attribute here will have no effect.rw Enumeration .1.3.6.1.4.1.562.36.2.1.71.6.12.1.19 |
mscFrUniSigDefaultLocCheckThis attribute specifies whether Passport needs to check the location
of Cause IE in a Release or a Disc message issued by local DTE. If
this bit is set to on, then Passport will check the location of Cause
IE issued by the local DTE and overwrite it by 'user'. If it is set to
off, then Passport will not check the location in Cause IE.rw Enumeration .1.3.6.1.4.1.562.36.2.1.71.6.12.1.20 |
mscFrUniSigSysParmsTableThis group contains the provisionable FRF.4 system parameters. SEQUENCE OF MscFrUniSigSysParmsEntry .1.3.6.1.4.1.562.36.2.1.71.6.13 |
mscFrUniSigSysParmsEntryAn entry in the mscFrUniSigSysParmsTable. MscFrUniSigSysParmsEntry .1.3.6.1.4.1.562.36.2.1.71.6.13.1 |
mscFrUniSigCallSetupTimerThis attribute specifies the time the network waits for a response to
the SETUP message sent to the called user. Upon timer expiry, the
SETUP message is retransmitted. The second expiry of this timer
causes the call to be cleared.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.6.13.1.1 |
mscFrUniSigDisconnectTimerThis attribute specifies the time the network waits for a response to
the DISCONNECT message sent to the user. Upon timer expiry, the
RELEASE message is sent.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.6.13.1.2 |
mscFrUniSigReleaseTimerThis attribute specifies the time the network waits for a response to
the RELEASE message sent to the user. Upon timer expiry, the
RELEASE message is retransmitted. The second expiry of the timer
causes the call to be released.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.6.13.1.3 |
mscFrUniSigCallProceedingTimerThis attribute specifies the time the network waits for the
CONNECT message from the called user after the network has
received the optional CALL PROCEEDING message from the
called user. Upon timer expiry, the call is cleared.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.6.13.1.4 |
mscFrUniSigNetworkTypeThis attribute specifies whether this Frame Relay service is running
on a public or a private network. This value is used solely in
populating applicable information elements within those FRF.4
messages that require a public or private network indication.rw Enumeration .1.3.6.1.4.1.562.36.2.1.71.6.13.1.5 |
mscFrUniSigRestartReqTimerThis attribute specifies the time the network waits for the RESTART
ACKNOWLEDGE message from the adjacent network after
sending a first RESTART message. Upon timer expiry, another
RESTART message is sent. After the second expiry, the interface is
treated as idle.
If the restartReqTimer attribute is set to the default value, then the
interface is treated as idle when it receives an indication that the
link is up and does not send a RESTART message.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.6.13.1.6 |
mscFrUniSigRestartRcvTimerThis attribute specifies the time the local network waits for the
processing of a RESTART message received by the interface. Upon
expiry of this timer, an alarm will be displayed to report the
problem. The timer value must be less than the restartReqTimer
provisioned value at the adjacent node.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.6.13.1.7 |
mscFrUniSigStatusEnqTimerThis attribute specifies the time the network waits for the requested
STATUS message from the adjacent network. Upon expiry of this
timer, another STATUS ENQUIRY message will be sent.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.6.13.1.8 |
mscFrUniSigLapfSysTableThis group contains the provisionable attributes for the SVC data
link layer. The data link layer is governed primarily through ITU
specification Q.922, and operates over DLCI 0.. SEQUENCE OF MscFrUniSigLapfSysEntry .1.3.6.1.4.1.562.36.2.1.71.6.14 |
mscFrUniSigLapfSysEntryAn entry in the mscFrUniSigLapfSysTable. MscFrUniSigLapfSysEntry .1.3.6.1.4.1.562.36.2.1.71.6.14.1 |
mscFrUniSigWindowSizeThis attribute specifies the window size. This is the maximum
number of unacknowledged sequenced frames that may be
outstanding from or to this interface at any one time.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.6.14.1.2 |
mscFrUniSigRetransmitLimitThis attribute specifies the number of times a frame can be
retransmitted by the SVC data link layer before appropriate
recovery action is taken.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.6.14.1.3 |
mscFrUniSigAckTimerThis attribute specifies how long the layer 2 protocol waits for an
acknowledgment to a sent frame. The value set for ackTimer must
be less than the value set for idleProbeTimer.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.6.14.1.4 |
mscFrUniSigAckDelayTimerThis attribute specifies how long the network waits before sending
an acknowledgment for a received in-sequence I-frame. A value of
0 means that every frame is acknowledged and there will be no
delay in acknowledgment. A non-zero value means that one
acknowledgement is sent for a number of frames.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.6.14.1.5 |
mscFrUniSigIdleProbeTimerThis attribute specifies how long the link is permitted to remain idle
(that is, no frames are exchanged on the data link). Upon expiry of
this timer, the network side's link layer polls its peer for status. The
value set for idleProbeTimer must be greater than the value set for
ackTimer.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.6.14.1.6 |
mscFrUniSigStateTableThis group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. SEQUENCE OF MscFrUniSigStateEntry .1.3.6.1.4.1.562.36.2.1.71.6.15 |
mscFrUniSigStateEntryAn entry in the mscFrUniSigStateTable. MscFrUniSigStateEntry .1.3.6.1.4.1.562.36.2.1.71.6.15.1 |
mscFrUniSigAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.71.6.15.1.1 |
mscFrUniSigOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.ro Enumeration .1.3.6.1.4.1.562.36.2.1.71.6.15.1.2 |
mscFrUniSigUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.ro Enumeration .1.3.6.1.4.1.562.36.2.1.71.6.15.1.3 |
mscFrUniSigStatsTableThis group contains the statistics related to the SVC signaling layer
at the interface level. SEQUENCE OF MscFrUniSigStatsEntry .1.3.6.1.4.1.562.36.2.1.71.6.16 |
mscFrUniSigStatsEntryAn entry in the mscFrUniSigStatsTable. MscFrUniSigStatsEntry .1.3.6.1.4.1.562.36.2.1.71.6.16.1 |
mscFrUniSigCurrentNumberOfSvcCallsThis attribute indicates the number of Frame Relay SVCs currently
existing on this interface.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.71.6.16.1.1 |
mscFrUniSigInCallsThis attribute indicates the current number of incoming SVCs on
this interface (that is, the number of SVCs for which this interface
represents the destination end of the call).ro Gauge32 .1.3.6.1.4.1.562.36.2.1.71.6.16.1.4 |
mscFrUniSigInCallsRefusedThis attribute counts the incoming SVC call requests that are
rejected by either this interface or by the called user. When this
count exceeds the maximum, it wraps to zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.71.6.16.1.5 |
mscFrUniSigOutCallsThis attribute indicates the current number of outgoing SVCs on
this interface (that is, the number of SVCs for which this interface
represents the source end of the call).ro Gauge32 .1.3.6.1.4.1.562.36.2.1.71.6.16.1.6 |
mscFrUniSigOutCallsFailedThis attribute counts the outgoing SVC call requests that are
rejected by either this interface, or by the network side of the
destination end, or by the called user. When this count exceeds the
maximum, it wraps to zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.71.6.16.1.7 |
mscFrUniSigProtocolErrorsThis attribute counts the number of times a FRF.4 protocol error has
occurred. Any one of the following events constitutes a protocol
error:
1. In the user-signaled Link Layer Core Parameters IE within the
SETUP or CONNECT messages, Cir, Bc and Be are all zero;
2. In the user-signaled Link Layer Core Parameters IE within the
SETUP or CONNECT messages, Cir is zero but Bc is
non-zero, or Bc is zero but Cir is non-zero;
3. In the user-signaled Link Layer Core Parameters IE within the
SETUP or CONNECT messages, the Minimum Acceptable CIR
is greater than Cir;
4. At the destination end, any of the destination to source direction
link layer core parameters has been increased in the
CONNECT message from the called user;
5. At the destination end, the destination to source direction Cir
in the CONNECT message is smaller than the corresponding
minimum acceptable Cir signaled to the called user;
6. At the source end, any of the source to destination direction
link layer core parameters in the CONNECT message from the
destination end has been increased;
7. At the source end, the source to destination direction Cir, after
negotiation, is smaller than the corresponding minimum
acceptable Cir;
8. The network has received a STATUS message from the user
with an incompatible FRF.4 state.
When this count reaches maximum, it wraps to zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.71.6.16.1.8 |
mscFrUniSigQualityOfServiceNotAvailableThis attribute counts the number of incoming and outgoing SVCs
that are rejected because the quality of service requested cannot be
met by the network. When this count reaches maximum, it wraps to
zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.71.6.16.1.9 |
mscFrUniSigSetupTimeoutThis attribute counts the number of times the T303 setup timer has
expired. When this count reaches maximum, it wraps to zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.71.6.16.1.10 |
mscFrUniSigLastCauseInStatusMsgReceivedThis attribute indicates the cause value in the last received user's
STATUS message to an existing call. The DLCI to which this
STATUS message applies is specified in the lastDlciReceivedStatus
attribute.
The initial value of this attribute is 0 which means that no STATUS
message has been received for an existing call yet.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.6.16.1.11 |
mscFrUniSigLastStateInStatusMsgReceivedThis attribute indicates the state value in the last received user's
STATUS message to an existing call. The DLCI to which this
STATUS message applies is specified in the lastDlciReceivedStatus
attribute.
The initial value of this attribute is notApplicable.ro Enumeration .1.3.6.1.4.1.562.36.2.1.71.6.16.1.12 |
mscFrUniSigLastDlciReceivedStatusThis attribute shows the value of the DLCI that has most recently
received a STATUS message from the user.
The initial value of this attribute is 0.ro Unsigned32 (0 | 16..1007) .1.3.6.1.4.1.562.36.2.1.71.6.16.1.13 |
mscFrUniSigLastStateReceivedStatusThis attribute shows the network FRF.4 state of the DLCI that has
most recently received a STATUS message from the user. The DLCI
to which this STATUS message applies is specified in the
lastDlciReceivedStatus attribute.
The initial value of this attribute is notApplicable.roobsolete Enumeration .1.3.6.1.4.1.562.36.2.1.71.6.16.1.14 |
mscFrUniSigLastTimeMsgBlockCongestedThis attribute displays the most recent time that an SVC DLCI has
failed to get a message block due to message block congestion.
Exceptional behavior can occur due to this. The DLCI that has most
recently encountered this is indicated by the
lastDlciWithMsgBlockCongestion attribute. However, all SVC
DLCIs may be affected.
The initial value of this attribute is 0000-00-00 00:00.roobsolete EnterpriseDateAndTime .1.3.6.1.4.1.562.36.2.1.71.6.16.1.15 |
mscFrUniSigLastDlciWithMsgBlockCongestionThis attribute shows the value of the DLCI that has most recently
failed to get a message block due to message block congestion.
The initial value of this attribute is 0.roobsolete Unsigned32 (0 | 16..1007) .1.3.6.1.4.1.562.36.2.1.71.6.16.1.16 |
mscFrUniSigCurrentAggregateSvcCirNormalQThis attribute shows the aggregate SVC CIR (for traffic transiting in
the network through normal priority queue) assigned to existing
SVCs on the interface.
The value of currentAggregateSvcCirNormalQ could be greater
than the provisionable value of maximumAggregateSvcCiNormalQ
if the value of maximumAggregateSvcCirNormalQ has been
changed during the service of this FrUni.roobsolete Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.6.16.1.17 |
mscFrUniSigCurrentAggregateSvcCirHighQThis attribute shows the aggregate SVC CIR (for traffic transiting in
the network through high priority queue) assigned to existing SVCs
on the interface.
The value of currentAggregateSvcCirHighQ could be greater than
the provisionable value of maximumAggregateSvcCirHighQ if the
value of maximumAggregateSvcCirHighQ has been changed during
the service of this FrUni.roobsolete Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.6.16.1.18 |
mscFrUniSigCurrentAggregateSvcCirInterruptQThis attribute shows the aggregate SVC CIR (for traffic transiting in
the network through interrupting queue) assigned to existing SVCs
on the interface.
The value of currentAggregateSvcCirInterruptQ could be greater
than the provisionable value of
maximumAggregateSvcCirInterruptQ if the value of
maximumAggregateSvcCirInterruptQ has been changed during the
service of this FrUni.roobsolete Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.6.16.1.19 |
mscFrUniSigCurrentAggregateSvcEirNormalQThis attribute shows the aggregate SVC EIR (for excess traffic
transiting in the network through normal priority queue) assigned to
existing SVCs on the interface.
The value of currentAggregateSvcEirNormalQ could be greater
than the provisionable value of maximumAggregateSvcEirNormalQ
if the value of maximumAggregateSvcEiNormalQ has been changed
during the service of this FrUni or unlimitedAggregateEir is set to
yes.roobsolete Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.6.16.1.20 |
mscFrUniSigCurrentAggregateSvcEirHighQThis attribute shows the aggregate SVC EIR (for excess traffic
transiting in the network through high priority queue) assigned to
existing SVCs on the interface.
The value of currentAggregateSvcEirHighQ could be greater than
the provisionable value of maximumAggregateSvcEirHighQ if the
value of maximumAggregateSvcEirHighQ has been changed during
the service of this FrUni or unlimitedAggregateEir is set to yes.roobsolete Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.6.16.1.21 |
mscFrUniSigCurrentAggregateSvcEirInterruptQThis attribute shows the aggregate SVC EIR (for excess traffic
transiting in the network through interrupting queue) assigned to
existing SVCs on the interface.
The value of currentAggregateSvcEirInterruptQ could be greater
than the provisionable value of
maximumAggregateSvcEirInterruptQ if the value of
maximumAggregateSvcEirInterruptQ has been changed during the
service of this FrUni or unlimitedAggregateEir is set to yes.roobsolete Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.6.16.1.22 |
mscFrUniSigLapfStatusTableThis group contains the Q.922 SVC data link layer status. SEQUENCE OF MscFrUniSigLapfStatusEntry .1.3.6.1.4.1.562.36.2.1.71.6.17 |
mscFrUniSigLapfStatusEntryAn entry in the mscFrUniSigLapfStatusTable. MscFrUniSigLapfStatusEntry .1.3.6.1.4.1.562.36.2.1.71.6.17.1 |
mscFrUniSigCurrentStateThis attribute shows the current state of the SVC data link layer
interface.ro Enumeration .1.3.6.1.4.1.562.36.2.1.71.6.17.1.1 |
mscFrUniSigLastStateChangeReasonThis attribute shows the reason for the most recent state change.
notStarted - this is the default state after SVC data link has just
been created.
abmeEntered - SVC data link has entered Asynchronous Balanced
Mode after SABME or UA has been received.
abmeReset - the data link has been reset.
dmReceived - DM response received.
dmSent - DM sent.
discReceived - DISC response received.
discSent - DISC sent.
frmrReceived - FRMR received.
n200RetranTimeOut - retransmitLimit has been exceeded.
other - unspecified state change reasons. The most likely reason for
this is the transition from state waitingAck to state
informationTransfer.ro Enumeration .1.3.6.1.4.1.562.36.2.1.71.6.17.1.2 |
mscFrUniSigFrmrReceiveThis attribute shows the information field of the Frame Reject
(FRMR) most recently received.ro HexString .1.3.6.1.4.1.562.36.2.1.71.6.17.1.3 |
mscFrUniSigCurrentQueueSizeThis attribute shows the current number of frames in the SVC data
link layer transmit queue.ro Counter32 .1.3.6.1.4.1.562.36.2.1.71.6.17.1.4 |
mscFrUniSigLapfStatsTableThis group contains the statistics for the SVC data link layer. SEQUENCE OF MscFrUniSigLapfStatsEntry .1.3.6.1.4.1.562.36.2.1.71.6.18 |
mscFrUniSigLapfStatsEntryAn entry in the mscFrUniSigLapfStatsTable. MscFrUniSigLapfStatsEntry .1.3.6.1.4.1.562.36.2.1.71.6.18.1 |
mscFrUniSigStateChangeThis attribute counts the number of times the SVC data link layer
interface has changed state. While the data link layer is in
informationTransfer state, this counter will increment on each
expiry of idleProbeTimer as its state goes from
informationTransfer to waitingAck and back. When this count
exceeds the maximum, it wraps to zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.71.6.18.1.1 |
mscFrUniSigRemoteBusyThis attribute counts the number of times transmission of an I-frame
was unsuccessful due to a perceived remote busy condition
(window closed or remote busy). When this count reaches
maximum, it wraps to zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.71.6.18.1.2 |
mscFrUniSigReceiveRejectFrameThis attribute counts the number of REJ frames received by the
interface. When this count reaches maximum, it wraps to zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.71.6.18.1.3 |
mscFrUniSigAckTimeoutThis attribute counts the number of times the ackTimer has expired.
Frequent increments of this counter indicate a problem at the link or
improper values have been chosen for ackTimer and ackDelayTimer
between the local and remote sides. When this count reaches
maximum, it wraps to zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.71.6.18.1.4 |
mscFrUniSigIFramesTransmittedThis attribute counts the number of SVC I-frames transmitted to the
interface on DLCI 0. An I-frame may be counted more than once if
there are retransmissions at the SVC data link layer. When this
count reaches maximum, it wraps to zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.71.6.18.1.5 |
mscFrUniSigIFramesTxDiscardedThis attribute counts the number of SVC I-frames that are bound for
the link but have been discarded. Discard reasons may be one of the
following:
1. the frame length is beyond the allowed limit.
2. the SVC data link layer is in disconnected state.
3. the transmit queue has been purged because the queue length
has reached the reset threshold.
4. the transmit queue or the queue waiting for acknowledgment
has been purged because the link cannot be re-established.
When this count reaches maximum, it wraps to zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.71.6.18.1.6 |
mscFrUniSigIFramesReceivedThis attribute counts the number of SVC I-frames received from the
interface. When this count reaches maximum, it wraps to zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.71.6.18.1.7 |
mscFrUniSigIFramesRcvdDiscardedThis attribute counts the number of SVC I-frames received but have
been discarded. The discard reasons are:
1. incorrect frame size
2. frame is out of sequence
3. frame received while the network side of the SVC data link
layer is not in the informationTransfer or waitingAck state.
When this count reaches maximum, it wraps to zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.71.6.18.1.8 |
mscFrUniSigSvcaccTableThis group contains the provisionable attribute which controls
accounting for this interface. SEQUENCE OF MscFrUniSigSvcaccEntry .1.3.6.1.4.1.562.36.2.1.71.6.19 |
mscFrUniSigSvcaccEntryAn entry in the mscFrUniSigSvcaccTable. MscFrUniSigSvcaccEntry .1.3.6.1.4.1.562.36.2.1.71.6.19.1 |
mscFrUniSigDefaultAccountingThis attribute specifies whether accounting data collection and
record generation is turned on for switched connections at this
interface. For accounting data collection and record generation to
occur, this attribute must be on and at least one of the
accountCollection reasons in the Dna component must be present.rw Enumeration .1.3.6.1.4.1.562.36.2.1.71.6.19.1.1 |
mscFrUniSigCodesTableThis group contains the remote data network address, the last SVC
clear cause and the last SVC diagnostic code coming from the
subnet or the local VC. SEQUENCE OF MscFrUniSigCodesEntry .1.3.6.1.4.1.562.36.2.1.71.6.20 |
mscFrUniSigCodesEntryAn entry in the mscFrUniSigCodesTable. MscFrUniSigCodesEntry .1.3.6.1.4.1.562.36.2.1.71.6.20.1 |
mscFrUniSigLastClearRemoteDataNetworkAddressThis attribute indicates the Data Network Address (DNA) of the
remote (the other end of the SVC connection) of the call which
cleared last and whose clear and diagnostic codes were recorded.ro DigitString .1.3.6.1.4.1.562.36.2.1.71.6.20.1.1 |
mscFrUniSigLastClearCauseThis attribute indicates the last SVC clear cause signalled at the end
of the connection or failure to connect. It is updated only if the clear
request comes from the subnet or the call is rejected locally by the
VC. The same set of possible values provides the clear cause field
in the accounting record.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.6.20.1.2 |
mscFrUniSigLastDiagnosticCodeThis attribute indicates the last SVC diagnostic code signalled at the
end of the connection or failure to connect. It is updated if the clear
request comes from the subnet or the call is rejected locally by the
VC. The same set of possible values provides the diagnostic code
field in the accounting record.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.6.20.1.3 |
mscFrUniSigBandwidthNotAvailableTableThis attribute counts the number of call failures for each bandwidth
pool due to the requested bandwidth not being available. SEQUENCE OF MscFrUniSigBandwidthNotAvailableEntry .1.3.6.1.4.1.562.36.2.1.71.6.711 |
mscFrUniSigBandwidthNotAvailableEntryAn entry in the mscFrUniSigBandwidthNotAvailableTable. MscFrUniSigBandwidthNotAvailableEntry .1.3.6.1.4.1.562.36.2.1.71.6.711.1 |
mscFrUniSigBandwidthNotAvailableIndexThis variable represents the mscFrUniSigBandwidthNotAvailableTable
specific index for the mscFrUniSigBandwidthNotAvailableTable. Integer32 .1.3.6.1.4.1.562.36.2.1.71.6.711.1.1 |
mscFrUniSigBandwidthNotAvailableValueThis variable represents an individual value for the
mscFrUniSigBandwidthNotAvailableTable.ro Counter32 .1.3.6.1.4.1.562.36.2.1.71.6.711.1.2 |
mscFrUniVFramer OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.71.8 |
mscFrUniVFramerRowStatusTableThis entry controls the addition and deletion of
mscFrUniVFramer components. SEQUENCE OF MscFrUniVFramerRowStatusEntry .1.3.6.1.4.1.562.36.2.1.71.8.1 |
mscFrUniVFramerRowStatusEntryA single entry in the table represents a single
mscFrUniVFramer component. MscFrUniVFramerRowStatusEntry .1.3.6.1.4.1.562.36.2.1.71.8.1.1 |
mscFrUniVFramerRowStatusThis variable is used as the basis for SNMP naming of
mscFrUniVFramer components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.71.8.1.1.1 |
mscFrUniVFramerComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.71.8.1.1.2 |
mscFrUniVFramerStorageTypeThis variable represents the storage type value for the
mscFrUniVFramer tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.71.8.1.1.4 |
mscFrUniVFramerIndexThis variable represents the index for the mscFrUniVFramer tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.71.8.1.1.10 |
mscFrUniVFramerProvTableThis group contains provisionable attributes for the VirtualFramer
component. SEQUENCE OF MscFrUniVFramerProvEntry .1.3.6.1.4.1.562.36.2.1.71.8.10 |
mscFrUniVFramerProvEntryAn entry in the mscFrUniVFramerProvTable. MscFrUniVFramerProvEntry .1.3.6.1.4.1.562.36.2.1.71.8.10.1 |
mscFrUniVFramerOtherVirtualFramerThis attribute specifies the other VirtualFramer to which the service
is linked, for example, FrUni/n VirtualFramer, FrDte/n
VirtualFramer.rw Link .1.3.6.1.4.1.562.36.2.1.71.8.10.1.1 |
mscFrUniVFramerLogicalProcessorThis attribute specifies the logical processor on which the service
component will reside.rw Link .1.3.6.1.4.1.562.36.2.1.71.8.10.1.2 |
mscFrUniVFramerStateTableThis group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. SEQUENCE OF MscFrUniVFramerStateEntry .1.3.6.1.4.1.562.36.2.1.71.8.11 |
mscFrUniVFramerStateEntryAn entry in the mscFrUniVFramerStateTable. MscFrUniVFramerStateEntry .1.3.6.1.4.1.562.36.2.1.71.8.11.1 |
mscFrUniVFramerAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.71.8.11.1.1 |
mscFrUniVFramerOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.ro Enumeration .1.3.6.1.4.1.562.36.2.1.71.8.11.1.2 |
mscFrUniVFramerUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.ro Enumeration .1.3.6.1.4.1.562.36.2.1.71.8.11.1.3 |
mscFrUniVFramerStatsTableThis group contains the operational statistics data for a
VirtualFramer component. SEQUENCE OF MscFrUniVFramerStatsEntry .1.3.6.1.4.1.562.36.2.1.71.8.12 |
mscFrUniVFramerStatsEntryAn entry in the mscFrUniVFramerStatsTable. MscFrUniVFramerStatsEntry .1.3.6.1.4.1.562.36.2.1.71.8.12.1 |
mscFrUniVFramerFrmToOtherVFramerThis attribute counts the frames transmitted to the
otherVirtualFramer.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.71.8.12.1.2 |
mscFrUniVFramerFrmFromOtherVFramerThis attribute counts the frames received from the
otherVirtualFramer.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.71.8.12.1.3 |
mscFrUniVFramerOctetFromOtherVFramerThis attribute counts the octets received from the
otherVirtualFramer.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.71.8.12.1.5 |
mscFrUniLts OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.71.9 |
mscFrUniLtsRowStatusTableThis entry controls the addition and deletion of
mscFrUniLts components. SEQUENCE OF MscFrUniLtsRowStatusEntry .1.3.6.1.4.1.562.36.2.1.71.9.1 |
mscFrUniLtsRowStatusEntryA single entry in the table represents a single
mscFrUniLts component. MscFrUniLtsRowStatusEntry .1.3.6.1.4.1.562.36.2.1.71.9.1.1 |
mscFrUniLtsRowStatusThis variable is used as the basis for SNMP naming of
mscFrUniLts components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.71.9.1.1.1 |
mscFrUniLtsComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.71.9.1.1.2 |
mscFrUniLtsStorageTypeThis variable represents the storage type value for the
mscFrUniLts tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.71.9.1.1.4 |
mscFrUniLtsIndexThis variable represents the index for the mscFrUniLts tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.71.9.1.1.10 |
mscFrUniLtsPat OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.71.9.2 |
mscFrUniLtsPatRowStatusTableThis entry controls the addition and deletion of
mscFrUniLtsPat components. SEQUENCE OF MscFrUniLtsPatRowStatusEntry .1.3.6.1.4.1.562.36.2.1.71.9.2.1 |
mscFrUniLtsPatRowStatusEntryA single entry in the table represents a single
mscFrUniLtsPat component. MscFrUniLtsPatRowStatusEntry .1.3.6.1.4.1.562.36.2.1.71.9.2.1.1 |
mscFrUniLtsPatRowStatusThis variable is used as the basis for SNMP naming of
mscFrUniLtsPat components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.71.9.2.1.1.1 |
mscFrUniLtsPatComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.71.9.2.1.1.2 |
mscFrUniLtsPatStorageTypeThis variable represents the storage type value for the
mscFrUniLtsPat tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.71.9.2.1.1.4 |
mscFrUniLtsPatIndexThis variable represents the index for the mscFrUniLtsPat tables. Integer32 .1.3.6.1.4.1.562.36.2.1.71.9.2.1.1.10 |
mscFrUniLtsPatDefaultsTableThis attribute group contains the specifications of the pattern. SEQUENCE OF MscFrUniLtsPatDefaultsEntry .1.3.6.1.4.1.562.36.2.1.71.9.2.10 |
mscFrUniLtsPatDefaultsEntryAn entry in the mscFrUniLtsPatDefaultsTable. MscFrUniLtsPatDefaultsEntry .1.3.6.1.4.1.562.36.2.1.71.9.2.10.1 |
mscFrUniLtsPatDefaultDlciThis attribute specifies for which dlci (on the local end) the frames
are destined.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.9.2.10.1.200 |
mscFrUniLtsPatDefaultNumFramesThis attribute specifies the number of frames in this pattern. This is
the number of frames of this type which will be generated in one
timeInterval.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.9.2.10.1.201 |
mscFrUniLtsPatDefaultDataSizeThis attribute specifies the payload size of each frame in bytes.
This is in excess to the header.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.9.2.10.1.202 |
mscFrUniLtsPatDefaultHeaderBitsThis attribute specifies whether the following bits are on/off in the
header of each frame. The following bits can be set:
BeCn, C/R, De, FeCn
Description of bits:
becn(0)
fecn(1)
cr(2)
de(3)rw OCTET STRING .1.3.6.1.4.1.562.36.2.1.71.9.2.10.1.203 |
mscFrUniLtsPatDefaultHeaderLengthThis attribute specifies the size of the frame relay header in bytes.
Passport currently only supports a 2-byte header.rw Unsigned32 (0 | 2..4) .1.3.6.1.4.1.562.36.2.1.71.9.2.10.1.204 |
mscFrUniLtsPatDefaultEABitsThis attribute specifies how the address field extension bits are set in
the frame header. Consider the value to be a four bit binary number.
For example, 4 = 0100. Only the first headerLength bits are used.
For instance, suppose headerLength is 3, then the appropriate
EABits is 2, or 0010. This attribute can be used to create a header
of length greater than two bytes or to specify incorrect EABits in
the header.rw Hex .1.3.6.1.4.1.562.36.2.1.71.9.2.10.1.205 |
mscFrUniLtsPatDefaultPayloadPatternThis attribute specifies the payload of each frame. The value
specified is in hexadecimal, where every two digits represent a byte.
A maximum of 24 digits (12 bytes) may be set, after which the
pattern will repeat in the payload (depending on repeatPattern
attribute).
NOTE: If a RFC 1490 header is specified, via the 1490Header
attribute, the specified pattern will begin following the header (i.e.
at the 9th byte in the payload).rw HexString .1.3.6.1.4.1.562.36.2.1.71.9.2.10.1.206 |
mscFrUniLtsPatDefaultRfc1490HeaderThis attribute specifies the appropriate RFC 1490 encapsulated
header of the frame. A value of 0 indicates no 1490 header.
NOTE: This header resides in the first 8 bytes of the payload. If the
specified value is non-zero, then the payload pattern provisioned
will begin at the 9th byte.rw Enumeration .1.3.6.1.4.1.562.36.2.1.71.9.2.10.1.207 |
mscFrUniLtsPatDefaultUseBadLrcThis attribute specifies whether the frames from this pattern are to
have a bad LRC prior to being sent to the framer. The LRC is
checked while the frame is being put onto the link and the failure
should cause an abort frame to be sent.rw Enumeration .1.3.6.1.4.1.562.36.2.1.71.9.2.10.1.208 |
mscFrUniLtsPatSetupTableThis attribute group contains the specifications of the pattern. SEQUENCE OF MscFrUniLtsPatSetupEntry .1.3.6.1.4.1.562.36.2.1.71.9.2.11 |
mscFrUniLtsPatSetupEntryAn entry in the mscFrUniLtsPatSetupTable. MscFrUniLtsPatSetupEntry .1.3.6.1.4.1.562.36.2.1.71.9.2.11.1 |
mscFrUniLtsPatDlciThis attribute specifies for which dlci (on the local end) the frames
are destined.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.9.2.11.1.200 |
mscFrUniLtsPatNumFramesThis attribute specifies the number of frames in this pattern. This is
the number of frames of this type which will be generated in one
timeInterval.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.9.2.11.1.201 |
mscFrUniLtsPatDataSizeThis attribute specifies the payload size of each frame in bytes.
This is in excess to the header.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.9.2.11.1.202 |
mscFrUniLtsPatHeaderBitsThis attribute specifies whether the following bits are on/off in the
header of each frame. The following bits can be set:
BeCn, C/R, De, FeCn
Description of bits:
becn(0)
fecn(1)
cr(2)
de(3)rw OCTET STRING .1.3.6.1.4.1.562.36.2.1.71.9.2.11.1.203 |
mscFrUniLtsPatHeaderLengthThis attribute specifies the size of the frame relay header in bytes.
Passport currently only supports a 2-byte header. Valid values are
0, 2, 3, 4. 0 indicates to use no header. That is, the frame will start
with either the payload or rfc1490 header.rw Unsigned32 (0 | 2..4) .1.3.6.1.4.1.562.36.2.1.71.9.2.11.1.204 |
mscFrUniLtsPatEaBitsThis attribute specifies how the address field extension bits are set in
the frame header. Consider the value to be a four bit binary number.
For example, 4 = 0100. Only the first headerLength bits are used.
For instance, suppose headerLength is 3, then the appropriate eaBits
is 2, or 0010. This attribute can be used to create a header of length
greater than two bytes or to specify incorrect eaBits in the header.rw Hex .1.3.6.1.4.1.562.36.2.1.71.9.2.11.1.205 |
mscFrUniLtsPatPayloadPatternThis attribute specifies the payload of each frame. The value
specified is in hexadecimal, where every two digits represent a byte.
A maximum of 24 digits (12 bytes) may be set, after which the
pattern will repeat in the payload (depending on repeatPattern
attribute).
NOTE: If a RFC 1490 header is specified, via the 1490Header
attribute, the specified pattern will begin following the header (i.e.
at the 9th byte in the payload).rw HexString .1.3.6.1.4.1.562.36.2.1.71.9.2.11.1.206 |
mscFrUniLtsPatRfc1490HeaderThis attribute specifies the appropriate RFC 1490 encapsulated
header of the frame. A value of 0 indicates no 1490 header.
NOTE: This header resides in the first 8 bytes of the payload. If the
specified value is non-zero, then the payload pattern provisioned
will begin at the 9th byte.rw Enumeration .1.3.6.1.4.1.562.36.2.1.71.9.2.11.1.207 |
mscFrUniLtsPatUseBadLrcThis attribute specifies whether the frames from this pattern are to
have a bad LRC prior to being sent to the framer. The LRC is
checked while the frame is being put onto the link and the failure
should cause an abort frame to be sent.rw Enumeration .1.3.6.1.4.1.562.36.2.1.71.9.2.11.1.208 |
mscFrUniLtsPatOpDataTableThis group contains the operational attributes which allow changing
the pattern outside of provisioning mode. SEQUENCE OF MscFrUniLtsPatOpDataEntry .1.3.6.1.4.1.562.36.2.1.71.9.2.12 |
mscFrUniLtsPatOpDataEntryAn entry in the mscFrUniLtsPatOpDataTable. MscFrUniLtsPatOpDataEntry .1.3.6.1.4.1.562.36.2.1.71.9.2.12.1 |
mscFrUniLtsPatFramePatternThis attribute displays the first 20 to 24 bytes of the frame payload,
depending on the frame relay header size selected. This attribute
represents the frame if it were at least 20 to 24 bytes in size. That
is, the actual frame may be smaller.ro HexString .1.3.6.1.4.1.562.36.2.1.71.9.2.12.1.200 |
mscFrUniLtsPatHdlcBitsInsertedThis attribute displays how many times a zero bit will be inserted
after 5 consecutive 1 bits when a frame from this pattern is sent out.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.9.2.12.1.201 |
mscFrUniLtsPatOpStateTableThis group contains the attributes containing the operational
statistics of the pattern. SEQUENCE OF MscFrUniLtsPatOpStateEntry .1.3.6.1.4.1.562.36.2.1.71.9.2.13 |
mscFrUniLtsPatOpStateEntryAn entry in the mscFrUniLtsPatOpStateTable. MscFrUniLtsPatOpStateEntry .1.3.6.1.4.1.562.36.2.1.71.9.2.13.1 |
mscFrUniLtsPatLoadThis attribute indicates the load due to this particular pattern. The
loads associated with all of the provisioned patterns are summed to
arrive at the FrLts load.ro FixedPoint3 .1.3.6.1.4.1.562.36.2.1.71.9.2.13.1.200 |
mscFrUniLtsPatStatusThis attributes specifies the administrative state of the pattern. A
disabled pattern will not be generated, although it can still be
triggered.rw Enumeration .1.3.6.1.4.1.562.36.2.1.71.9.2.13.1.201 |
mscFrUniLtsSetupTableThis attribute group contains the parameters used to configure the
behavior of the Frame Relay Load Test System. SEQUENCE OF MscFrUniLtsSetupEntry .1.3.6.1.4.1.562.36.2.1.71.9.10 |
mscFrUniLtsSetupEntryAn entry in the mscFrUniLtsSetupTable. MscFrUniLtsSetupEntry .1.3.6.1.4.1.562.36.2.1.71.9.10.1 |
mscFrUniLtsDurationThis attribute specifies the duration of the test in milliseconds. The
test will run until the duration expires or the STOP command is
issued. A value of 0 is used to indicate infinity.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.9.10.1.200 |
mscFrUniLtsAlgorithmThis attribute specifies which algorithm is used to generate the
frames.
ContinuousBurst
This mode of traffic generation creates traffic at the maximum rate
possible until all of the frames have been sent. The generator then
waits until the end of the timeInterval to begin again.
IntervalBurst
This algorithm attempts to generate 10 ms bursts of burstSize
frames. It will generate as many of the burstSize frames as it can per
sub-interval.
DelayedBurst
This algorithm generates bursts of burstSize frames separated by 10
ms delays.
FixedBurst
This aglorithm is similar to IntervalBurst, except a fixed burst size
of 12 frames is used.
delayMeasurement
This algorithm is used to measure delay. The specified number of
frames in the indicated pattern are generated, one at a time, with a
maximum wait of maxDelay before sending the next frame.
This algorithm is not implemented yet.rw Enumeration .1.3.6.1.4.1.562.36.2.1.71.9.10.1.201 |
mscFrUniLtsBurstSizeThis attribute specifies the number of frames per burst under the
delayedBurst and intervalBurst algorithms.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.9.10.1.204 |
mscFrUniLtsTimeIntervalThis attribute specifies the time interval to the specified number of
seconds. Granuality is in centiseconds. Maximum is 1 minute.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.9.10.1.205 |
mscFrUniLtsStateTableThis group contains the operation statistics of the load generator. SEQUENCE OF MscFrUniLtsStateEntry .1.3.6.1.4.1.562.36.2.1.71.9.11 |
mscFrUniLtsStateEntryAn entry in the mscFrUniLtsStateTable. MscFrUniLtsStateEntry .1.3.6.1.4.1.562.36.2.1.71.9.11.1 |
mscFrUniLtsGeneratorStateThis attribute indicates whether the Lts is generating traffic.ro Enumeration .1.3.6.1.4.1.562.36.2.1.71.9.11.1.200 |
mscFrUniLtsCycleIncompleteThis attribute indicates whether the time required to generate all of
the enabled patterns is more than timeInterval by a true value.
Otherwise, this flag is set to false. Default is True.ro Enumeration .1.3.6.1.4.1.562.36.2.1.71.9.11.1.201 |
mscFrUniLtsLastActiveIntervalThis attribute indicates the actual time it took to generate all of the
enabled patterns in the last cycle. If cycleIncomplete is true, this
value should be zero.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.9.11.1.202 |
mscFrUniLtsLoadThis attribute indicates the load being generated. This value
represents that calculated using the set number of ticks. The actual
burstTimeInterval may differ. One entire cycle of the patterns is
completed in activeInterval and thus most of the load may be
concentrated early in the set interval.ro FixedPoint3 .1.3.6.1.4.1.562.36.2.1.71.9.11.1.204 |
mscFrUniLtsElapsedGenerationTimeThis attribute indicates how many milliseconds have elapsed since
the start of this test.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.9.11.1.205 |
mscFrUniLtsResultsTableThis group contains the frame counting attributes for the LTS
component. SEQUENCE OF MscFrUniLtsResultsEntry .1.3.6.1.4.1.562.36.2.1.71.9.12 |
mscFrUniLtsResultsEntryAn entry in the mscFrUniLtsResultsTable. MscFrUniLtsResultsEntry .1.3.6.1.4.1.562.36.2.1.71.9.12.1 |
mscFrUniLtsFramesTxThis attribute specifies the number of frames send to the network
since the last time these statistics were cleared. This is similar to the
framesToIf attribute of the FRAMER component.ro Counter32 .1.3.6.1.4.1.562.36.2.1.71.9.12.1.200 |
mscFrUniLtsBytesTxThis attribute indicates the number of bytes sent.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.9.12.1.204 |
mscFrUniLtsBitRateTxThis attribute indicates the bit rate being sent to the link. It should
only differ from the load if the burstTimeInterval would be >= the
timeInterval or burstSize frames cannot be generated in 10ms
(intervalBurst algorithm).ro FixedPoint3 .1.3.6.1.4.1.562.36.2.1.71.9.12.1.208 |
mscFrUniLtsFrameRateTxThis attribute indicates the frame rate being sent to the link. It is
calculated using the number of frames sent to the link in one cycle
of the patterns.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.9.12.1.209 |
mscFrUniCidDataTableThis group contains the attribute for a component's Customer
Identifier (CID). Refer to the attribute description for a detailed
explanation of CIDs. SEQUENCE OF MscFrUniCidDataEntry .1.3.6.1.4.1.562.36.2.1.71.10 |
mscFrUniCidDataEntryAn entry in the mscFrUniCidDataTable. MscFrUniCidDataEntry .1.3.6.1.4.1.562.36.2.1.71.10.1 |
mscFrUniCustomerIdentifierThis attribute holds the Customer Identifier (CID).
Every component has a CID. If a component has a cid attribute, the
component's CID is the provisioned value of that attribute;
otherwise the component inherits the CID of its parent. The top-
level component has a CID of 0.
Every operator session also has a CID, which is the CID
provisioned for the operator's user ID. An operator will see only the
stream data for components having a matching CID. Also, the
operator will be allowed to issue commands for only those
components which have a matching CID.
An operator CID of 0 is used to identify the Network Manager
(referred to as 'NetMan' in DPN). This CID matches the CID of
any component. Values 1 to 8191 inclusive (equivalent to 'basic
CIDs' in DPN) may be assigned to specific customers.rw Unsigned32 (0 | 1..8191) .1.3.6.1.4.1.562.36.2.1.71.10.1.1 |
mscFrUniStateTableThis group contains the three OSI State attributes and the six OSI
Status attributes. The descriptions generically indicate what each
attribute implies about the component. Note that not all the values
and state combinations described here are supported by every
component which uses this group. For component-specific
information and the valid state combinations, refer to NTP 241-
7001-150, Passport Operations and Maintenance Guide. SEQUENCE OF MscFrUniStateEntry .1.3.6.1.4.1.562.36.2.1.71.11 |
mscFrUniStateEntryAn entry in the mscFrUniStateTable. MscFrUniStateEntry .1.3.6.1.4.1.562.36.2.1.71.11.1 |
mscFrUniAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.71.11.1.1 |
mscFrUniOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.71.11.1.2 |
mscFrUniUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.71.11.1.3 |
mscFrUniAvailabilityStatusIf supported by the component, this attribute indicates the OSI
Availability status of the component. Note that, even though it is
defined as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value inTest indicates that the resource is undergoing a test
procedure. If adminState is locked or shuttingDown, the normal
users are precluded from using the resource and controlStatus is
reservedForTest. Tests that do not exclude additional users can be
present in any operational or administrative state but the
reservedForTest condition should not be present.
The value failed indicates that the component has an internal fault
that prevents it from operating. The operationalState is disabled.
The value dependency indicates that the component cannot operate
because some other resource on which it depends is unavailable.
The operationalState is disabled.
The value powerOff indicates the resource requires power to be
applied and it is not powered on. The operationalState is disabled.
The value offLine indicates the resource requires a routine
operation (either manual, automatic, or both) to be performed to
place it on-line and make it available for use. The operationalState
is disabled.
The value offDuty indicates the resource is inactive in accordance
with a predetermined time schedule. In the absence of other
disabling conditions, the operationalState is enabled or disabled.
The value degraded indicates the service provided by the
component is degraded in some way, such as in speed or operating
capacity. However, the resource remains available for service. The
operationalState is enabled.
The value notInstalled indicates the resource is not present. The
operationalState is disabled.
The value logFull is not used.
Description of bits:
inTest(0)
failed(1)
powerOff(2)
offLine(3)
offDuty(4)
dependency(5)
degraded(6)
notInstalled(7)
logFull(8)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.71.11.1.4 |
mscFrUniProceduralStatusIf supported by the component, this attribute indicates the OSI
Procedural status of the component. Note that, even though it is
defined as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value initializationRequired indicates (for a resource which
doesn't initialize autonomously) that initialization is required before
it can perform its normal functions, and this procedure has not been
initiated. The operationalState is disabled.
The value notInitialized indicates (for a resource which does
initialize autonomously) that initialization is required before it can
perform its normal functions, and this procedure has not been
initiated. The operationalState may be enabled or disabled.
The value initializing indicates that initialization has been initiated
but is not yet complete. The operationalState may be enabled or
disabled.
The value reporting indicates the resource has completed some
processing operation and is notifying the results. The
operationalState is enabled.
The value terminating indicates the component is in a termination
phase. If the resource doesn't reinitialize autonomously,
operationalState is disabled; otherwise it is enabled or disabled.
Description of bits:
initializationRequired(0)
notInitialized(1)
initializing(2)
reporting(3)
terminating(4)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.71.11.1.5 |
mscFrUniControlStatusIf supported by the component, this attribute indicates the OSI
Control status of the component. Note that, even though it is defined
as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value subjectToTest indicates the resource is available but tests
may be conducted simultaneously at unpredictable times, which
may cause it to exhibit unusual characteristics.
The value partOfServicesLocked indicates that part of the service is
restricted from users of a resource. The adminState is unlocked.
The value reservedForTest indicates that the component is
administratively unavailable because it is undergoing a test
procedure. The adminState is locked.
The value suspended indicates that the service has been
administratively suspended.
Description of bits:
subjectToTest(0)
partOfServicesLocked(1)
reservedForTest(2)
suspended(3)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.71.11.1.6 |
mscFrUniAlarmStatusIf supported by the component, this attribute indicates the OSI
Alarm status of the component. Note that, even though it is defined
as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value underRepair indicates the component is currently being
repaired. The operationalState is enabled or disabled.
The value critical indicates one or more critical alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value major indicates one or more major alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value minor indicates one or more minor alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value alarmOutstanding generically indicates that an alarm of
some severity is outstanding against the component.
Description of bits:
underRepair(0)
critical(1)
major(2)
minor(3)
alarmOutstanding(4)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.71.11.1.7 |
mscFrUniStandbyStatusIf supported by the component, this attribute indicates the OSI
Standby status of the component.
The value notSet indicates that either the attribute is not supported
or that none of the status conditions described below are present.
Note that this is a non-standard value, used because the original
specification indicated this attribute was set-valued and thus, did not
provide a value to indicate that none of the other three are
applicable.
The value hotStandby indicates that the resource is not providing
service but will be immediately able to take over the role of the
resource to be backed up, without initialization activity, and
containing the same information as the resource to be backed up.
The value coldStandby indicates the resource is a backup for
another resource but will not be immediately able to take over the
role of the backed up resource and will require some initialization
activity.
The value providingService indicates that this component, as a
backup resource, is currently backing up another resource.ro Enumeration .1.3.6.1.4.1.562.36.2.1.71.11.1.8 |
mscFrUniUnknownStatusThis attribute indicates the OSI Unknown status of the component.
The value false indicates that all of the other OSI State and Status
attribute values can be considered accurate.
The value true indicates that the actual state of the component is not
known for sure.ro Enumeration .1.3.6.1.4.1.562.36.2.1.71.11.1.9 |
mscFrUniStatsTableFrUni/n Statistics
This group contains the statistics about the operational behavior of
the service at the interface level. SEQUENCE OF MscFrUniStatsEntry .1.3.6.1.4.1.562.36.2.1.71.12 |
mscFrUniStatsEntryAn entry in the mscFrUniStatsTable. MscFrUniStatsEntry .1.3.6.1.4.1.562.36.2.1.71.12.1 |
mscFrUniLastUnknownDlciThis attribute identifies the most recent DLCI which user frames
were received on for which a DLCI has not been provisioned on the
port.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.12.1.1 |
mscFrUniUnknownDlciFramesFromIfThis attribute contains a count of the number of frames received
from the interface with an unknown DLCI (DLCI which is not
provisioned). When the maximum is reached the count wraps to
zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.71.12.1.2 |
mscFrUniInvalidHeaderFramesFromIfThis attribute counts the number of frames received from the
interface with an invalid header format. When the maximum is
reached the count wraps to zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.71.12.1.3 |
mscFrUniIfEntryTableThis group contains the provisionable attributes for the ifEntry. SEQUENCE OF MscFrUniIfEntryEntry .1.3.6.1.4.1.562.36.2.1.71.13 |
mscFrUniIfEntryEntryAn entry in the mscFrUniIfEntryTable. MscFrUniIfEntryEntry .1.3.6.1.4.1.562.36.2.1.71.13.1 |
mscFrUniIfAdminStatusThe desired state of the interface. The up state indicates the
interface is operational. The down state indicates the interface is not
operational. The testing state indicates that no operational packets
can be passed.rw Enumeration .1.3.6.1.4.1.562.36.2.1.71.13.1.1 |
mscFrUniIfIndexThis is the index for the IfEntry. Its value is automatically initialized
during the provisioning process.ro InterfaceIndex .1.3.6.1.4.1.562.36.2.1.71.13.1.2 |
mscFrUniOperStatusTableThis group includes the Operational Status attribute. This attribute
defines the current operational state of this component. SEQUENCE OF MscFrUniOperStatusEntry .1.3.6.1.4.1.562.36.2.1.71.14 |
mscFrUniOperStatusEntryAn entry in the mscFrUniOperStatusTable. MscFrUniOperStatusEntry .1.3.6.1.4.1.562.36.2.1.71.14.1 |
mscFrUniSnmpOperStatusThe current state of the interface. The up state indicates the
interface is operational and capable of forwarding packets. The
down state indicates the interface is not operational, thus unable to
forward packets. testing state indicates that no operational packets
can be passed.ro Enumeration .1.3.6.1.4.1.562.36.2.1.71.14.1.1 |
mscFrUniEmissionPriorityQsTableThis group contains the provisionable attribute to specifie the
number of Frame Relay egress emission priority queues to be used
on that Frame Relay Interface SEQUENCE OF MscFrUniEmissionPriorityQsEntry .1.3.6.1.4.1.562.36.2.1.71.15 |
mscFrUniEmissionPriorityQsEntryAn entry in the mscFrUniEmissionPriorityQsTable. MscFrUniEmissionPriorityQsEntry .1.3.6.1.4.1.562.36.2.1.71.15.1 |
mscFrUniNumberOfEmissionQsThis attribute specifies the number of egress emission priority
queues that will be used for that Frame Relay interface. The
possible values of this attribute are 2 or 4:
For V.35, V.11, HSSI, E1, DS1, E3, DS3 or 8pDS1 the possible
values are: 2 (in which case they are hardware queues), or 4 (in
which case they are software queues).
For DS1C, E1C or DS3C the possible values are 2, 4 (in all cases
they are software queues).rw Unsigned32 (2 | 4) .1.3.6.1.4.1.562.36.2.1.71.15.1.1 |
mscFrUniCa OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.71.101 |
mscFrUniCaRowStatusTableThis entry controls the addition and deletion of
mscFrUniCa components. SEQUENCE OF MscFrUniCaRowStatusEntry .1.3.6.1.4.1.562.36.2.1.71.101.1 |
mscFrUniCaRowStatusEntryA single entry in the table represents a single
mscFrUniCa component. MscFrUniCaRowStatusEntry .1.3.6.1.4.1.562.36.2.1.71.101.1.1 |
mscFrUniCaRowStatusThis variable is used as the basis for SNMP naming of
mscFrUniCa components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.71.101.1.1.1 |
mscFrUniCaComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.71.101.1.1.2 |
mscFrUniCaStorageTypeThis variable represents the storage type value for the
mscFrUniCa tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.71.101.1.1.4 |
mscFrUniCaIndexThis variable represents the index for the mscFrUniCa tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.71.101.1.1.10 |
mscFrUniCaTpm OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.71.101.2 |
mscFrUniCaTpmRowStatusTableThis entry controls the addition and deletion of
mscFrUniCaTpm components. SEQUENCE OF MscFrUniCaTpmRowStatusEntry .1.3.6.1.4.1.562.36.2.1.71.101.2.1 |
mscFrUniCaTpmRowStatusEntryA single entry in the table represents a single
mscFrUniCaTpm component. MscFrUniCaTpmRowStatusEntry .1.3.6.1.4.1.562.36.2.1.71.101.2.1.1 |
mscFrUniCaTpmRowStatusThis variable is used as the basis for SNMP naming of
mscFrUniCaTpm components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.71.101.2.1.1.1 |
mscFrUniCaTpmComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.71.101.2.1.1.2 |
mscFrUniCaTpmStorageTypeThis variable represents the storage type value for the
mscFrUniCaTpm tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.71.101.2.1.1.4 |
mscFrUniCaTpmIndexThis variable represents the index for the mscFrUniCaTpm tables. Integer32 .1.3.6.1.4.1.562.36.2.1.71.101.2.1.1.10 |
mscFrUniCaTpmProvTableThis attribute group contains the provisionable attributes of the Tpm
component at this interface. SEQUENCE OF MscFrUniCaTpmProvEntry .1.3.6.1.4.1.562.36.2.1.71.101.2.10 |
mscFrUniCaTpmProvEntryAn entry in the mscFrUniCaTpmProvTable. MscFrUniCaTpmProvEntry .1.3.6.1.4.1.562.36.2.1.71.101.2.10.1 |
mscFrUniCaTpmAssignedIngressBandwidthPoolThis attribute specifies the ingress bandwidth pool which is used to
support this transfer priority at this interface. When this attribute is
set to sameAsModule, the bandwidth pool that is used is obtained
from the assignedIngressBandwidthPool attribute under the Mod
Frs DprsNet Tpm/n component.
VALUES (
16 = sameAsModule
)rw Unsigned32 (0..15 | 16) .1.3.6.1.4.1.562.36.2.1.71.101.2.10.1.2 |
mscFrUniCaTpmAssignedEgressBandwidthPoolThis attribute specifies the egress bandwidth pool which is used to
support this transfer priority at this interface. When this attribute is
set to sameAsModule, the bandwidth pool that is used is obtained
from the assignedEgressBandwidthPool attribute under the Mod
Frs DprsNet Tpm/n component.
VALUES (
16 = sameAsModule
)rw Unsigned32 (0..15 | 16) .1.3.6.1.4.1.562.36.2.1.71.101.2.10.1.3 |
mscFrUniCaProvTableThis attribute group contains the common provisionable attributes
of the Ca component. SEQUENCE OF MscFrUniCaProvEntry .1.3.6.1.4.1.562.36.2.1.71.101.10 |
mscFrUniCaProvEntryAn entry in the mscFrUniCaProvTable. MscFrUniCaProvEntry .1.3.6.1.4.1.562.36.2.1.71.101.10.1 |
mscFrUniCaOverrideLinkRateThis attribute allows the link rate to be overridden for this interface.
This allows the user to specify a value other than the actual physical
link rate computed when a Framer component is provisioned.
When a VFramer component is provisioned, this attribute overrides
a link rate set to the maximum value supported by CAC .
This attribute serves to provide the user control on the amount of
bandwidth available for performing CAC.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.101.10.1.2 |
mscFrUniCaMaximumBandwidthPerCallThis attribute specifies the maximum bandwidth that can be
allocated per connection.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.101.10.1.3 |
mscFrUniCaIngressCacTableThis attribute group contains the common provisionable attributes
for ingress call admission control. SEQUENCE OF MscFrUniCaIngressCacEntry .1.3.6.1.4.1.562.36.2.1.71.101.11 |
mscFrUniCaIngressCacEntryAn entry in the mscFrUniCaIngressCacTable. MscFrUniCaIngressCacEntry .1.3.6.1.4.1.562.36.2.1.71.101.11.1 |
mscFrUniCaIngressApplyToCosThis attribute specifies which Classes of Service (CoS) have ingress
Call Admission Control (CAC) applied to them. Ingress CAC
applies only to swithced connections (SVCs and S-SPVCs).
none - Ingress CAC is turned off for all classes of service.
cirOnly - Ingress CAC is applied only to the CIR portion of a
connection's bandwidth requirements for CIR>0 classes of service.
cirAndEir - Ingress CAC is applied to both CIR and EIR portions
of a connections bandwidth requirements for all classes of service.rw Enumeration .1.3.6.1.4.1.562.36.2.1.71.101.11.1.2 |
mscFrUniCaIngressMaximumEirOnlyCallsThis attribute specifies the maximum number of connections in the
ingress direction with EIR only traffic that can be up at a given
time.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.101.11.1.4 |
mscFrUniCaEgressCacTableThis attribute group contains the common provisionable attributes
for egress call admission control. SEQUENCE OF MscFrUniCaEgressCacEntry .1.3.6.1.4.1.562.36.2.1.71.101.12 |
mscFrUniCaEgressCacEntryAn entry in the mscFrUniCaEgressCacTable. MscFrUniCaEgressCacEntry .1.3.6.1.4.1.562.36.2.1.71.101.12.1 |
mscFrUniCaEgressApplyToCosThis attribute specifies which Classes of Service (CoS) have egress
Call Admission Control (CAC) applied to them. Egress CAC
applies only to swithced connections (SVCs and S-SPVCs).
none - Egress CAC is turned off for all classes of service.
cirOnly - Egress CAC is applied only to the CIR portion of a
connection's bandwidth requirements for CIR>0 classes of service.
cirAndEir - Egress CAC is applied to both CIR and EIR portions of
a connections bandwidth requirements for all classes of service.rw Enumeration .1.3.6.1.4.1.562.36.2.1.71.101.12.1.2 |
mscFrUniCaEgressMaximumEirOnlyCallsThis attribute specifies the maximum number of connections in the
egress direction with EIR only traffic that can be up at a given time.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.101.12.1.4 |
mscFrUniCaOpTableThis attribute group contains the operational status of the Ca
component. SEQUENCE OF MscFrUniCaOpEntry .1.3.6.1.4.1.562.36.2.1.71.101.13 |
mscFrUniCaOpEntryAn entry in the mscFrUniCaOpTable. MscFrUniCaOpEntry .1.3.6.1.4.1.562.36.2.1.71.101.13.1 |
mscFrUniCaLinkRateThis attribute indicates the link rate used by both ingress and egress
CAC to calculate the effective bandwidth pool sizes.
If the provisionable attribute overrideLinkRate under this
component is 0, then the link rate reported is the actual link rate of
the port or channel. Otherwise, the link rate reported is the
overrideLinkRate under this component.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.101.13.1.2 |
mscFrUniCaNumberRejectedEgressCirPermConnThis attribute indicates the number of permanent connections (that
is, PVC and P-SPVC) that are rejected by egress CAC. A
connection is rejected by egress CAC if it requests more egress CIR
bandwidth than is available, and the egressApplyToCos attribute is
set to either cirOnly or cirAndEir.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.71.101.13.1.681 |
mscFrUniCaNumberRejectedEgressEirPermConnThis attribute indicates the number of permanent connections (that
is, PVC and P-SPVC) that are rejected by egress CAC. A
connection is rejected by egress CAC if it requests more egress EIR
bandwidth than is available, and the egressApplyToCos attribute is
set to cirAndEir.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.71.101.13.1.682 |
mscFrUniCaIngCirBPTablePort capacity is partitioned into 16 pools (pool 0 through pool 15)
for the ingress CIR traffic. This attribute specifies the percentage of
port capacity that is allowed for each pool. The percentage for each
pool ranges from 0% to 1000% of the link rate. It allows for under
or over subscription of the port. Under subscription occurs when the
sum of the percentages assigned to the 16 pools is less than 100%.
Over subscription occurs when the sum of the percentages for the
16 pools exceeds 100%.
The default is full sharing of port capacity with three pre-set
partitions. SEQUENCE OF MscFrUniCaIngCirBPEntry .1.3.6.1.4.1.562.36.2.1.71.101.666 |
mscFrUniCaIngCirBPEntryAn entry in the mscFrUniCaIngCirBPTable. MscFrUniCaIngCirBPEntry .1.3.6.1.4.1.562.36.2.1.71.101.666.1 |
mscFrUniCaIngCirBPIndexThis variable represents the mscFrUniCaIngCirBPTable
specific index for the mscFrUniCaIngCirBPTable. Integer32 .1.3.6.1.4.1.562.36.2.1.71.101.666.1.1 |
mscFrUniCaIngCirBPValueThis variable represents an individual value for the
mscFrUniCaIngCirBPTable.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.101.666.1.2 |
mscFrUniCaEgCirBpTablePort capacity is partitioned into 16 pools (pool 0 through pool 15)
for the egress CIR traffic. This attribute specifies the percentage of
port capacity that is allowed for each pool. The percentage for each
pool ranges from 0% to 1000% of the link rate. It allows for under
or over subscription of the port. Under subscription occurs when the
sum of the percentages assigned to the 16 pools is less than 100%.
Over subscription occurs when the sum of the percentages for the
16 pools exceeds 100%.
The default is full sharing of port capacity with three pre-set
partitions. SEQUENCE OF MscFrUniCaEgCirBpEntry .1.3.6.1.4.1.562.36.2.1.71.101.667 |
mscFrUniCaEgCirBpEntryAn entry in the mscFrUniCaEgCirBpTable. MscFrUniCaEgCirBpEntry .1.3.6.1.4.1.562.36.2.1.71.101.667.1 |
mscFrUniCaEgCirBpIndexThis variable represents the mscFrUniCaEgCirBpTable
specific index for the mscFrUniCaEgCirBpTable. Integer32 .1.3.6.1.4.1.562.36.2.1.71.101.667.1.1 |
mscFrUniCaEgCirBpValueThis variable represents an individual value for the
mscFrUniCaEgCirBpTable.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.101.667.1.2 |
mscFrUniCaIngCirPoolAdmitBwTableThis attribute indicates the total admitted CIR bandwidth from each
CIR bandwidth pool in the ingress direction. Each value is the sum
of the equivalent bit rates of the admitted connections. SEQUENCE OF MscFrUniCaIngCirPoolAdmitBwEntry .1.3.6.1.4.1.562.36.2.1.71.101.668 |
mscFrUniCaIngCirPoolAdmitBwEntryAn entry in the mscFrUniCaIngCirPoolAdmitBwTable. MscFrUniCaIngCirPoolAdmitBwEntry .1.3.6.1.4.1.562.36.2.1.71.101.668.1 |
mscFrUniCaIngCirPoolAdmitBwIndexThis variable represents the mscFrUniCaIngCirPoolAdmitBwTable
specific index for the mscFrUniCaIngCirPoolAdmitBwTable. Integer32 .1.3.6.1.4.1.562.36.2.1.71.101.668.1.1 |
mscFrUniCaIngCirPoolAdmitBwValueThis variable represents an individual value for the
mscFrUniCaIngCirPoolAdmitBwTable.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.71.101.668.1.2 |
mscFrUniCaIngCirPoolAvailBwTableThis attribute indicates the remaining available CIR bandwidth in
each ingress CIR bandwidth pool. SEQUENCE OF MscFrUniCaIngCirPoolAvailBwEntry .1.3.6.1.4.1.562.36.2.1.71.101.669 |
mscFrUniCaIngCirPoolAvailBwEntryAn entry in the mscFrUniCaIngCirPoolAvailBwTable. MscFrUniCaIngCirPoolAvailBwEntry .1.3.6.1.4.1.562.36.2.1.71.101.669.1 |
mscFrUniCaIngCirPoolAvailBwIndexThis variable represents the mscFrUniCaIngCirPoolAvailBwTable
specific index for the mscFrUniCaIngCirPoolAvailBwTable. Integer32 .1.3.6.1.4.1.562.36.2.1.71.101.669.1.1 |
mscFrUniCaIngCirPoolAvailBwValueThis variable represents an individual value for the
mscFrUniCaIngCirPoolAvailBwTable.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.71.101.669.1.2 |
mscFrUniCaEgCirPoolAdmitBwTableThis attribute indicates the total admitted CIR bandwidth from each
CIR bandwidth pool in the egress direction. Each value is the sum
of the equivalent bit rates of the admitted connections. SEQUENCE OF MscFrUniCaEgCirPoolAdmitBwEntry .1.3.6.1.4.1.562.36.2.1.71.101.670 |
mscFrUniCaEgCirPoolAdmitBwEntryAn entry in the mscFrUniCaEgCirPoolAdmitBwTable. MscFrUniCaEgCirPoolAdmitBwEntry .1.3.6.1.4.1.562.36.2.1.71.101.670.1 |
mscFrUniCaEgCirPoolAdmitBwIndexThis variable represents the mscFrUniCaEgCirPoolAdmitBwTable
specific index for the mscFrUniCaEgCirPoolAdmitBwTable. Integer32 .1.3.6.1.4.1.562.36.2.1.71.101.670.1.1 |
mscFrUniCaEgCirPoolAdmitBwValueThis variable represents an individual value for the
mscFrUniCaEgCirPoolAdmitBwTable.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.71.101.670.1.2 |
mscFrUniCaEgCirPoolAvailBwTableThis attribute indicates the remaining available CIR bandwidth in
each egress CIR bandwidth pool. SEQUENCE OF MscFrUniCaEgCirPoolAvailBwEntry .1.3.6.1.4.1.562.36.2.1.71.101.671 |
mscFrUniCaEgCirPoolAvailBwEntryAn entry in the mscFrUniCaEgCirPoolAvailBwTable. MscFrUniCaEgCirPoolAvailBwEntry .1.3.6.1.4.1.562.36.2.1.71.101.671.1 |
mscFrUniCaEgCirPoolAvailBwIndexThis variable represents the mscFrUniCaEgCirPoolAvailBwTable
specific index for the mscFrUniCaEgCirPoolAvailBwTable. Integer32 .1.3.6.1.4.1.562.36.2.1.71.101.671.1.1 |
mscFrUniCaEgCirPoolAvailBwValueThis variable represents an individual value for the
mscFrUniCaEgCirPoolAvailBwTable.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.71.101.671.1.2 |
mscFrUniCaIngEirBpTablePort capacity is partitioned into 16 pools (pool 0 through pool 15)
for the ingress EIR traffic. This attribute specifies the percentage of
port capacity that is allowed for each pool. The percentage for each
pool ranges from 0% to 1000% of the link rate. It allows for under
or over subscription of the port. Under subscription occurs when the
sum of the percentages assigned to the 16 pools is less than 100%.
Over subscription occurs when the sum of the percentages for the
16 pools exceeds 100%.
The default is full sharing of port capacity with three pre-set
partitions. SEQUENCE OF MscFrUniCaIngEirBpEntry .1.3.6.1.4.1.562.36.2.1.71.101.673 |
mscFrUniCaIngEirBpEntryAn entry in the mscFrUniCaIngEirBpTable. MscFrUniCaIngEirBpEntry .1.3.6.1.4.1.562.36.2.1.71.101.673.1 |
mscFrUniCaIngEirBpIndexThis variable represents the mscFrUniCaIngEirBpTable
specific index for the mscFrUniCaIngEirBpTable. Integer32 .1.3.6.1.4.1.562.36.2.1.71.101.673.1.1 |
mscFrUniCaIngEirBpValueThis variable represents an individual value for the
mscFrUniCaIngEirBpTable.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.101.673.1.2 |
mscFrUniCaEgEirBpTablePort capacity is partitioned into 16 pools (pool 0 through pool 15)
for the egress EIR traffic. This attribute specifies the percentage of
port capacity that is allowed for each pool. The percentage for each
pool ranges from 0% to 1000% of the link rate. It allows for under
or over subscription of the port. Under subscription occurs when the
sum of the percentages assigned to the 16 pools is less than 100%.
Over subscription occurs when the sum of the percentages for the
16 pools exceeds 100%.
The default is full sharing of port capacity with three pre-set
partitions. SEQUENCE OF MscFrUniCaEgEirBpEntry .1.3.6.1.4.1.562.36.2.1.71.101.674 |
mscFrUniCaEgEirBpEntryAn entry in the mscFrUniCaEgEirBpTable. MscFrUniCaEgEirBpEntry .1.3.6.1.4.1.562.36.2.1.71.101.674.1 |
mscFrUniCaEgEirBpIndexThis variable represents the mscFrUniCaEgEirBpTable
specific index for the mscFrUniCaEgEirBpTable. Integer32 .1.3.6.1.4.1.562.36.2.1.71.101.674.1.1 |
mscFrUniCaEgEirBpValueThis variable represents an individual value for the
mscFrUniCaEgEirBpTable.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.101.674.1.2 |
mscFrUniCaIngEirPoolAdmitBwTableThis attribute indicates the total admitted EIR bandwidth from each
EIR bandwidth pool in the ingress direction. Each value is the sum
of the equivalent bit rates of the admitted connections.
If the ingressApplyToCos attribute is set to none, all ingress CIR
bandwidth pools are set to 0. SEQUENCE OF MscFrUniCaIngEirPoolAdmitBwEntry .1.3.6.1.4.1.562.36.2.1.71.101.675 |
mscFrUniCaIngEirPoolAdmitBwEntryAn entry in the mscFrUniCaIngEirPoolAdmitBwTable. MscFrUniCaIngEirPoolAdmitBwEntry .1.3.6.1.4.1.562.36.2.1.71.101.675.1 |
mscFrUniCaIngEirPoolAdmitBwIndexThis variable represents the mscFrUniCaIngEirPoolAdmitBwTable
specific index for the mscFrUniCaIngEirPoolAdmitBwTable. Integer32 .1.3.6.1.4.1.562.36.2.1.71.101.675.1.1 |
mscFrUniCaIngEirPoolAdmitBwValueThis variable represents an individual value for the
mscFrUniCaIngEirPoolAdmitBwTable.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.71.101.675.1.2 |
mscFrUniCaIngEirPoolAvailBwTableThis attribute indicates the remaining available EIR bandwidth in
each ingress EIR bandwidth pool.
If the ingressApplyToCos attribute is set to either none or cirOnly,
all ingress EIR bandwidth pools are set to 0. SEQUENCE OF MscFrUniCaIngEirPoolAvailBwEntry .1.3.6.1.4.1.562.36.2.1.71.101.676 |
mscFrUniCaIngEirPoolAvailBwEntryAn entry in the mscFrUniCaIngEirPoolAvailBwTable. MscFrUniCaIngEirPoolAvailBwEntry .1.3.6.1.4.1.562.36.2.1.71.101.676.1 |
mscFrUniCaIngEirPoolAvailBwIndexThis variable represents the mscFrUniCaIngEirPoolAvailBwTable
specific index for the mscFrUniCaIngEirPoolAvailBwTable. Integer32 .1.3.6.1.4.1.562.36.2.1.71.101.676.1.1 |
mscFrUniCaIngEirPoolAvailBwValueThis variable represents an individual value for the
mscFrUniCaIngEirPoolAvailBwTable.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.71.101.676.1.2 |
mscFrUniCaEgEirPoolAdmitBwTableThis attribute indicates the total admitted EIR bandwidth from each
EIR bandwidth pool in the egress direction. Each value is the sum
of the equivalent bit rates of the admitted connections.
If the egressApplyToCos attribute is set to none, all egress CIR
bandwidth pools are set to 0. SEQUENCE OF MscFrUniCaEgEirPoolAdmitBwEntry .1.3.6.1.4.1.562.36.2.1.71.101.677 |
mscFrUniCaEgEirPoolAdmitBwEntryAn entry in the mscFrUniCaEgEirPoolAdmitBwTable. MscFrUniCaEgEirPoolAdmitBwEntry .1.3.6.1.4.1.562.36.2.1.71.101.677.1 |
mscFrUniCaEgEirPoolAdmitBwIndexThis variable represents the mscFrUniCaEgEirPoolAdmitBwTable
specific index for the mscFrUniCaEgEirPoolAdmitBwTable. Integer32 .1.3.6.1.4.1.562.36.2.1.71.101.677.1.1 |
mscFrUniCaEgEirPoolAdmitBwValueThis variable represents an individual value for the
mscFrUniCaEgEirPoolAdmitBwTable.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.71.101.677.1.2 |
mscFrUniCaEgEirPoolAvailBwTableThis attribute indicates the remaining available EIR bandwidth in
each egress EIR bandwidth pool.
If the egressApplyToCos attribute is set to either none or cirOnly,
all egress EIR bandwidth pools are set to 0. SEQUENCE OF MscFrUniCaEgEirPoolAvailBwEntry .1.3.6.1.4.1.562.36.2.1.71.101.678 |
mscFrUniCaEgEirPoolAvailBwEntryAn entry in the mscFrUniCaEgEirPoolAvailBwTable. MscFrUniCaEgEirPoolAvailBwEntry .1.3.6.1.4.1.562.36.2.1.71.101.678.1 |
mscFrUniCaEgEirPoolAvailBwIndexThis variable represents the mscFrUniCaEgEirPoolAvailBwTable
specific index for the mscFrUniCaEgEirPoolAvailBwTable. Integer32 .1.3.6.1.4.1.562.36.2.1.71.101.678.1.1 |
mscFrUniCaEgEirPoolAvailBwValueThis variable represents an individual value for the
mscFrUniCaEgEirPoolAvailBwTable.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.71.101.678.1.2 |
mscFrUniFrmToIfByQueueTableThis attribute counts the total number of frames transmitted to the
interface per egress emission priority queue since the component
has been activated. There is potientially a maximum of 4 emission
priority queues. The number of available egress queues varies
according to the value of the provisionable attribute
numberOfEmissionQs. Egress queue 0 has the lowest priority, while
egress queue 3 has the highest priority. The queue values
are only indicated when the numberOfEmissionQs is set to 4
queues. SEQUENCE OF MscFrUniFrmToIfByQueueEntry .1.3.6.1.4.1.562.36.2.1.71.341 |
mscFrUniFrmToIfByQueueEntryAn entry in the mscFrUniFrmToIfByQueueTable. MscFrUniFrmToIfByQueueEntry .1.3.6.1.4.1.562.36.2.1.71.341.1 |
mscFrUniFrmToIfByQueueIndexThis variable represents the index for the mscFrUniFrmToIfByQueueTable. Integer32 .1.3.6.1.4.1.562.36.2.1.71.341.1.1 |
mscFrUniFrmToIfByQueueValueThis variable represents an individual value for the
mscFrUniFrmToIfByQueueTable.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.341.1.2 |
mscFrUniOctetToIfByQueueTableThis attribute counts the total number of octets transmitted from the
service to the interface per emission priority queue since the
component has been activated. There is potientially a maximum of
4 emission priority queues. The number of available egress queues
varies according to the value of the provisionable attribute
numberOfEmissionQs. Egress queue 0 has the lowest priority, while
egress queue 3 has the highest priority. SEQUENCE OF MscFrUniOctetToIfByQueueEntry .1.3.6.1.4.1.562.36.2.1.71.342 |
mscFrUniOctetToIfByQueueEntryAn entry in the mscFrUniOctetToIfByQueueTable. MscFrUniOctetToIfByQueueEntry .1.3.6.1.4.1.562.36.2.1.71.342.1 |
mscFrUniOctetToIfByQueueIndexThis variable represents the index for the mscFrUniOctetToIfByQueueTable. Integer32 .1.3.6.1.4.1.562.36.2.1.71.342.1.1 |
mscFrUniOctetToIfByQueueValueThis variable represents an individual value for the
mscFrUniOctetToIfByQueueTable.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.71.342.1.2 |
frameRelayUniMIB OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.24 |
IMPORTS Unknown .1.3.6.1.4.1.562.36.2.2.24 |
frameRelayUniGroup OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.24.1 |
frameRelayUniGroupCA OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.24.1.1 |
frameRelayUniGroupCA02 OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.24.1.1.3 |
frameRelayUniGroupCA02A OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.24.1.1.3.2 |
frameRelayUniCapabilities OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.24.3 |
frameRelayUniCapabilitiesCA OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.24.3.1 |
frameRelayUniCapabilitiesCA02 OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.24.3.1.3 |
frameRelayUniCapabilitiesCA02A OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.24.3.1.3.2 |