Nortel-MsCarrier-MscPassport-FrameRelayDteMIB
AI MIB Summary
Standard SNMP MIB module defining data structures for Nortel-MsCarrier-MscPassport-FrameRelayDteMIB.
319
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
319 total| Object Name |
|---|
mscFrDte OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.101 |
mscFrDteRowStatusTableThis entry controls the addition and deletion of
mscFrDte components. SEQUENCE OF MscFrDteRowStatusEntry .1.3.6.1.4.1.562.36.2.1.101.1 |
mscFrDteRowStatusEntryA single entry in the table represents a single
mscFrDte component. MscFrDteRowStatusEntry .1.3.6.1.4.1.562.36.2.1.101.1.1 |
mscFrDteRowStatusThis variable is used as the basis for SNMP naming of
mscFrDte components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.101.1.1.1 |
mscFrDteComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.101.1.1.2 |
mscFrDteStorageTypeThis variable represents the storage type value for the
mscFrDte tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.101.1.1.4 |
mscFrDteIndexThis variable represents the index for the mscFrDte tables. Integer32 .1.3.6.1.4.1.562.36.2.1.101.1.1.10 |
mscFrDteFramer OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.101.2 |
mscFrDteFramerRowStatusTableThis entry controls the addition and deletion of
mscFrDteFramer components. SEQUENCE OF MscFrDteFramerRowStatusEntry .1.3.6.1.4.1.562.36.2.1.101.2.1 |
mscFrDteFramerRowStatusEntryA single entry in the table represents a single
mscFrDteFramer component. MscFrDteFramerRowStatusEntry .1.3.6.1.4.1.562.36.2.1.101.2.1.1 |
mscFrDteFramerRowStatusThis variable is used as the basis for SNMP naming of
mscFrDteFramer components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.101.2.1.1.1 |
mscFrDteFramerComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.101.2.1.1.2 |
mscFrDteFramerStorageTypeThis variable represents the storage type value for the
mscFrDteFramer tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.101.2.1.1.4 |
mscFrDteFramerIndexThis variable represents the index for the mscFrDteFramer tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.101.2.1.1.10 |
mscFrDteFramerProvTableThis group contains the base provisioning data for the Framer
component. Application or hardware interface specific provisioning data
is contained in other provisional Framer groups. SEQUENCE OF MscFrDteFramerProvEntry .1.3.6.1.4.1.562.36.2.1.101.2.10 |
mscFrDteFramerProvEntryAn entry in the mscFrDteFramerProvTable. MscFrDteFramerProvEntry .1.3.6.1.4.1.562.36.2.1.101.2.10.1 |
mscFrDteFramerInterfaceNameThis attribute contains a hardware component name.
The attribute associates the application with a specific link. This defines
the module processor on which Framer's parent component (as well as
Framer itself) will run.rw Link .1.3.6.1.4.1.562.36.2.1.101.2.10.1.1 |
mscFrDteFramerStateTableThis group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. SEQUENCE OF MscFrDteFramerStateEntry .1.3.6.1.4.1.562.36.2.1.101.2.12 |
mscFrDteFramerStateEntryAn entry in the mscFrDteFramerStateTable. MscFrDteFramerStateEntry .1.3.6.1.4.1.562.36.2.1.101.2.12.1 |
mscFrDteFramerAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.101.2.12.1.1 |
mscFrDteFramerOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.ro Enumeration .1.3.6.1.4.1.562.36.2.1.101.2.12.1.2 |
mscFrDteFramerUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.ro Enumeration .1.3.6.1.4.1.562.36.2.1.101.2.12.1.3 |
mscFrDteFramerStatsTableThis group contains the operational statistics data for a Framer
component. SEQUENCE OF MscFrDteFramerStatsEntry .1.3.6.1.4.1.562.36.2.1.101.2.13 |
mscFrDteFramerStatsEntryAn entry in the mscFrDteFramerStatsTable. MscFrDteFramerStatsEntry .1.3.6.1.4.1.562.36.2.1.101.2.13.1 |
mscFrDteFramerFrmToIfThis attribute counts the number of frames transmitted to the link
interface by Framer.
Note: This does not include the number of frames transmitted directly to
the hardware queue, thus bypassing the Framer component.ro Counter32 .1.3.6.1.4.1.562.36.2.1.101.2.13.1.1 |
mscFrDteFramerFrmFromIfThis attribute counts the number of frames received from the link
interface by Framer.ro Counter32 .1.3.6.1.4.1.562.36.2.1.101.2.13.1.2 |
mscFrDteFramerAbortsThis attribute counts the total number of aborts received.ro Counter32 .1.3.6.1.4.1.562.36.2.1.101.2.13.1.3 |
mscFrDteFramerCrcErrorsThis attribute counts the total number of frames with CRC errors.ro Counter32 .1.3.6.1.4.1.562.36.2.1.101.2.13.1.4 |
mscFrDteFramerLrcErrorsThis attribute counts the total number of frames with LRC errors.ro Counter32 .1.3.6.1.4.1.562.36.2.1.101.2.13.1.5 |
mscFrDteFramerNonOctetErrorsThis attribute counts the total number of frames that were non octet
aligned.ro Counter32 .1.3.6.1.4.1.562.36.2.1.101.2.13.1.6 |
mscFrDteFramerOverrunsThis attribute counts the total number of frames received from the link
for which overruns occurred.ro Counter32 .1.3.6.1.4.1.562.36.2.1.101.2.13.1.7 |
mscFrDteFramerUnderrunsThis attribute counts the total number of frames transmitted to the link
for which underruns occurred.ro Counter32 .1.3.6.1.4.1.562.36.2.1.101.2.13.1.8 |
mscFrDteFramerLargeFrmErrorsThis attribute counts the total number of frames received which were too
large. The frame exceeded the maximumFrameLengthLimit
provisioned attribute or it contained more than the 255 block hardware
limit.ro Counter32 .1.3.6.1.4.1.562.36.2.1.101.2.13.1.9 |
mscFrDteFramerUtilTableThis group contains the link utilization operational data for a Framer
component. SEQUENCE OF MscFrDteFramerUtilEntry .1.3.6.1.4.1.562.36.2.1.101.2.14 |
mscFrDteFramerUtilEntryAn entry in the mscFrDteFramerUtilTable. MscFrDteFramerUtilEntry .1.3.6.1.4.1.562.36.2.1.101.2.14.1 |
mscFrDteFramerNormPrioLinkUtilToIfThis attribute is the utilization of the normal priority data sent to the link
as a percentage of the available bandwidth on the link. The utilization is
the average for the last minute.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.101.2.14.1.1 |
mscFrDteFramerNormPrioLinkUtilFromIfThis attribute is the utilization of the normal priority data received from
the link as a percentage of the available bandwidth on the link. The
utilization is the average for the last minute.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.101.2.14.1.3 |
mscFrDteLmi OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.101.3 |
mscFrDteLmiRowStatusTableThis entry controls the addition and deletion of
mscFrDteLmi components. SEQUENCE OF MscFrDteLmiRowStatusEntry .1.3.6.1.4.1.562.36.2.1.101.3.1 |
mscFrDteLmiRowStatusEntryA single entry in the table represents a single
mscFrDteLmi component. MscFrDteLmiRowStatusEntry .1.3.6.1.4.1.562.36.2.1.101.3.1.1 |
mscFrDteLmiRowStatusThis variable is used as the basis for SNMP naming of
mscFrDteLmi components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.101.3.1.1.1 |
mscFrDteLmiComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.101.3.1.1.2 |
mscFrDteLmiStorageTypeThis variable represents the storage type value for the
mscFrDteLmi tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.101.3.1.1.4 |
mscFrDteLmiIndexThis variable represents the index for the mscFrDteLmi tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.101.3.1.1.10 |
mscFrDteLmiProvTableThis group contains the provisioned attributes for the Lmi component. SEQUENCE OF MscFrDteLmiProvEntry .1.3.6.1.4.1.562.36.2.1.101.3.10 |
mscFrDteLmiProvEntryAn entry in the mscFrDteLmiProvTable. MscFrDteLmiProvEntry .1.3.6.1.4.1.562.36.2.1.101.3.10.1 |
mscFrDteLmiProceduresThis attribute selects the Local Management Interface (LMI) protocol to
be used on the interface. This attribute is equivalent to the SNMP
variable frDlcmiState. The vendorForum LMI protocol automatically
implies that the DLCI used by the protocol is 1023. The ansi (T1.617
Annex D) and ccitt (Q.933 Annex A) LMI protocols use DLCI 0. If
none is selected, no LMI procedures will run on the interface.rw Enumeration .1.3.6.1.4.1.562.36.2.1.101.3.10.1.1 |
mscFrDteLmiPollingIntervalThis is the number of seconds between successive status enquiry
messages. This field corresponds to the parameter T391 described in the
ANSI T1.617-1991 Annex D.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.101.3.10.1.4 |
mscFrDteLmiFullEnquiryIntervalThe count of status polls before a full status enquiry message is issued.
Every nth poll will request a full status. This field corresponds to the
parameter N391 described in the ANSI T1.617-1991 Annex D.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.101.3.10.1.5 |
mscFrDteLmiErrorThresholdThe number of errors detected within the monitored events window
before declaring the link non-functional. This field corresponds to the
parameter N392 described in the ANSI T1.617-1991 Annex D.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.101.3.10.1.6 |
mscFrDteLmiMonitoredEventsThe number of status polling intervals over which the errorthreshold is
counted This is used to determine if the errorThreshold is exceeded.
This field corresponds to the parameter N393 described in the ANSI
T1.617-1991 Annex D.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.101.3.10.1.7 |
mscFrDteLmiOperTableThis group contains the operational attributes for the Lmi component. SEQUENCE OF MscFrDteLmiOperEntry .1.3.6.1.4.1.562.36.2.1.101.3.11 |
mscFrDteLmiOperEntryAn entry in the mscFrDteLmiOperTable. MscFrDteLmiOperEntry .1.3.6.1.4.1.562.36.2.1.101.3.11.1 |
mscFrDteLmiLmiStatusThis indicates the status of the Frame Relay interface as determined by
the performance of the link management interface (LMI). If no LMI is
running, lmiStatus will stay in the running state indefinitely.ro Enumeration .1.3.6.1.4.1.562.36.2.1.101.3.11.1.2 |
mscFrDteRg OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.101.4 |
mscFrDteRgRowStatusTableThis entry controls the addition and deletion of
mscFrDteRg components. SEQUENCE OF MscFrDteRgRowStatusEntry .1.3.6.1.4.1.562.36.2.1.101.4.1 |
mscFrDteRgRowStatusEntryA single entry in the table represents a single
mscFrDteRg component. MscFrDteRgRowStatusEntry .1.3.6.1.4.1.562.36.2.1.101.4.1.1 |
mscFrDteRgRowStatusThis variable is used as the basis for SNMP naming of
mscFrDteRg components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.101.4.1.1.1 |
mscFrDteRgComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.101.4.1.1.2 |
mscFrDteRgStorageTypeThis variable represents the storage type value for the
mscFrDteRg tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.101.4.1.1.4 |
mscFrDteRgIndexThis variable represents the index for the mscFrDteRg tables. Integer32 .1.3.6.1.4.1.562.36.2.1.101.4.1.1.10 |
mscFrDteRgIfEntryTableThis group contains the provisionable attributes for the ifEntry. SEQUENCE OF MscFrDteRgIfEntryEntry .1.3.6.1.4.1.562.36.2.1.101.4.10 |
mscFrDteRgIfEntryEntryAn entry in the mscFrDteRgIfEntryTable. MscFrDteRgIfEntryEntry .1.3.6.1.4.1.562.36.2.1.101.4.10.1 |
mscFrDteRgIfAdminStatusThe desired state of the interface. The up state indicates the
interface is operational. The down state indicates the interface is not
operational. The testing state indicates that no operational packets
can be passed.rw Enumeration .1.3.6.1.4.1.562.36.2.1.101.4.10.1.1 |
mscFrDteRgIfIndexThis is the index for the IfEntry. Its value is automatically initialized
during the provisioning process.ro InterfaceIndex .1.3.6.1.4.1.562.36.2.1.101.4.10.1.2 |
mscFrDteRgProvTableThis group contains the provisioned attributes for the Remote Group
component. SEQUENCE OF MscFrDteRgProvEntry .1.3.6.1.4.1.562.36.2.1.101.4.11 |
mscFrDteRgProvEntryAn entry in the mscFrDteRgProvTable. MscFrDteRgProvEntry .1.3.6.1.4.1.562.36.2.1.101.4.11.1 |
mscFrDteRgMaxTransmissionUnitThe Maximum Transmission Unit size of the largest datagram
(including Frame Relay header) which can be sent on the interface.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.101.4.11.1.1 |
mscFrDteRgMpTableThis group contains the base provisioning data for the Media
Application component. SEQUENCE OF MscFrDteRgMpEntry .1.3.6.1.4.1.562.36.2.1.101.4.12 |
mscFrDteRgMpEntryAn entry in the mscFrDteRgMpTable. MscFrDteRgMpEntry .1.3.6.1.4.1.562.36.2.1.101.4.12.1 |
mscFrDteRgLinkToProtocolPortThis attribute contains a protocol port component name. The attribute
associates the application with a protocol port.rw Link .1.3.6.1.4.1.562.36.2.1.101.4.12.1.1 |
mscFrDteRgStateTableThis group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. SEQUENCE OF MscFrDteRgStateEntry .1.3.6.1.4.1.562.36.2.1.101.4.13 |
mscFrDteRgStateEntryAn entry in the mscFrDteRgStateTable. MscFrDteRgStateEntry .1.3.6.1.4.1.562.36.2.1.101.4.13.1 |
mscFrDteRgAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.101.4.13.1.1 |
mscFrDteRgOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.ro Enumeration .1.3.6.1.4.1.562.36.2.1.101.4.13.1.2 |
mscFrDteRgUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.ro Enumeration .1.3.6.1.4.1.562.36.2.1.101.4.13.1.3 |
mscFrDteRgOperStatusTableThis group includes the Operational Status attribute. This attribute
defines the current operational state of this component. SEQUENCE OF MscFrDteRgOperStatusEntry .1.3.6.1.4.1.562.36.2.1.101.4.14 |
mscFrDteRgOperStatusEntryAn entry in the mscFrDteRgOperStatusTable. MscFrDteRgOperStatusEntry .1.3.6.1.4.1.562.36.2.1.101.4.14.1 |
mscFrDteRgSnmpOperStatusThe current state of the interface. The up state indicates the
interface is operational and capable of forwarding packets. The
down state indicates the interface is not operational, thus unable to
forward packets. testing state indicates that no operational packets
can be passed.ro Enumeration .1.3.6.1.4.1.562.36.2.1.101.4.14.1.1 |
mscFrDteRgBfr OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.101.4.15 |
mscFrDteRgBfrRowStatusTableThis entry controls the addition and deletion of
mscFrDteRgBfr components. SEQUENCE OF MscFrDteRgBfrRowStatusEntry .1.3.6.1.4.1.562.36.2.1.101.4.15.1 |
mscFrDteRgBfrRowStatusEntryA single entry in the table represents a single
mscFrDteRgBfr component. MscFrDteRgBfrRowStatusEntry .1.3.6.1.4.1.562.36.2.1.101.4.15.1.1 |
mscFrDteRgBfrRowStatusThis variable is used as the basis for SNMP naming of
mscFrDteRgBfr components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.101.4.15.1.1.1 |
mscFrDteRgBfrComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.101.4.15.1.1.2 |
mscFrDteRgBfrStorageTypeThis variable represents the storage type value for the
mscFrDteRgBfr tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.101.4.15.1.1.4 |
mscFrDteRgBfrIndexThis variable represents the index for the mscFrDteRgBfr tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.101.4.15.1.1.10 |
mscFrDteRgBfrProvTableThis group contains the provisioning attributes for the Bfr component. SEQUENCE OF MscFrDteRgBfrProvEntry .1.3.6.1.4.1.562.36.2.1.101.4.15.10 |
mscFrDteRgBfrProvEntryAn entry in the mscFrDteRgBfrProvTable. MscFrDteRgBfrProvEntry .1.3.6.1.4.1.562.36.2.1.101.4.15.10.1 |
mscFrDteRgBfrMacTypeThis attribute specifies the MAC address type of the Bfr component.
The value must be chosen based on the media of the traffic source. For
traffic originated from FDDI, use fddi; for ethernet, use enet; for token
ring, use tokenRingrw Enumeration .1.3.6.1.4.1.562.36.2.1.101.4.15.10.1.1 |
mscFrDteRgBfrBfrIndexThis attribute specifies the value which is used to derive a unique MAC
address for the Bfr. The bfrIndex must be unique across all Bfrs on the
same Lp.rw INTEGER .1.3.6.1.4.1.562.36.2.1.101.4.15.10.1.2 |
mscFrDteRgBfrOprTableThis group contains the operational attributes for the Bfr component.. SEQUENCE OF MscFrDteRgBfrOprEntry .1.3.6.1.4.1.562.36.2.1.101.4.15.11 |
mscFrDteRgBfrOprEntryAn entry in the mscFrDteRgBfrOprTable. MscFrDteRgBfrOprEntry .1.3.6.1.4.1.562.36.2.1.101.4.15.11.1 |
mscFrDteRgBfrMacAddrThis attribute indicates the unique MAC address of the Bfr component.
This value is derived by the value of the attribute bfrIndex.
The value is displayed as cannonical format.ro DashedHexString .1.3.6.1.4.1.562.36.2.1.101.4.15.11.1.1 |
mscFrDteRgLtDlciTableThis attribute associates a Rg component with zero or more StDlci
components. The Rg and StDlci components must be under the same
FrDte component. SEQUENCE OF MscFrDteRgLtDlciEntry .1.3.6.1.4.1.562.36.2.1.101.4.219 |
mscFrDteRgLtDlciEntryAn entry in the mscFrDteRgLtDlciTable. MscFrDteRgLtDlciEntry .1.3.6.1.4.1.562.36.2.1.101.4.219.1 |
mscFrDteRgLtDlciValueThis variable represents both the value and the index for the
mscFrDteRgLtDlciTable.rw Link .1.3.6.1.4.1.562.36.2.1.101.4.219.1.1 |
mscFrDteRgLtDlciRowStatusThis variable is used to control the addition and deletion
of individual values of the mscFrDteRgLtDlciTable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.101.4.219.1.2 |
mscFrDteDynDlciDefs OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.101.5 |
mscFrDteDynDlciDefsRowStatusTableThis entry controls the addition and deletion of
mscFrDteDynDlciDefs components. SEQUENCE OF MscFrDteDynDlciDefsRowStatusEntry .1.3.6.1.4.1.562.36.2.1.101.5.1 |
mscFrDteDynDlciDefsRowStatusEntryA single entry in the table represents a single
mscFrDteDynDlciDefs component. MscFrDteDynDlciDefsRowStatusEntry .1.3.6.1.4.1.562.36.2.1.101.5.1.1 |
mscFrDteDynDlciDefsRowStatusThis variable is used as the basis for SNMP naming of
mscFrDteDynDlciDefs components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.101.5.1.1.1 |
mscFrDteDynDlciDefsComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.101.5.1.1.2 |
mscFrDteDynDlciDefsStorageTypeThis variable represents the storage type value for the
mscFrDteDynDlciDefs tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.101.5.1.1.4 |
mscFrDteDynDlciDefsIndexThis variable represents the index for the mscFrDteDynDlciDefs tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.101.5.1.1.10 |
mscFrDteDynDlciDefsProvTableThis group contains the provisioned attributes for a virtual circuit. These
attributes represent the default settings for the resulting Dlci components
and can be operationally changed using the corresponding attributes
under the Dlci component. SEQUENCE OF MscFrDteDynDlciDefsProvEntry .1.3.6.1.4.1.562.36.2.1.101.5.10 |
mscFrDteDynDlciDefsProvEntryAn entry in the mscFrDteDynDlciDefsProvTable. MscFrDteDynDlciDefsProvEntry .1.3.6.1.4.1.562.36.2.1.101.5.10.1 |
mscFrDteDynDlciDefsStdRowStatusThis attribute is used to manage the status of a StDlci component.
Set to active to enable the StDlci component.
Set to notInService to disable the StDlci component.
Set to createAndGo (SNMP only) to create a new StDlci component.
Set to destroy (SNMP only) to delete an existing StDlci component.rw Enumeration .1.3.6.1.4.1.562.36.2.1.101.5.10.1.1 |
mscFrDteDynDlciDefsRateEnforcementThis attribute specifies whether the CIR attributes
committedInformationRate, committedBurst, and excessBurst are used to
define rate enforcement on this user DLCI.
If rateEnforcement is enabled, and the combined Committed and Excess
burst thresholds are exceeded, the frame in violation will be discarded
immediately if a HibernationQueue subcomponent is not provisioned
under the StDlci component. If a HibernationQueue is provisioned, the
frame will be placed on the HibernationQueue at time of violation and
transmission will be attempted later after the point at which the burst
thresholds will no longer be exceeded.
Setting all the CIR attributes to zero has the same affect as setting this
attribute to disabled.rw Enumeration .1.3.6.1.4.1.562.36.2.1.101.5.10.1.2 |
mscFrDteDynDlciDefsCommittedInformationRateThe average number of bits to be transferred per second over the DLCI
to the DCE. When this attribute is set to zero, the link speed will be used
instead.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.101.5.10.1.3 |
mscFrDteDynDlciDefsCommittedBurstThe committed burst size (in bits) to which the DLCI wants to
subscribe.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.101.5.10.1.4 |
mscFrDteDynDlciDefsExcessBurstThe excess burst size (in bits) to which the DLCI wants to subscribe.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.101.5.10.1.5 |
mscFrDteDynDlciDefsExcessBurstActionThis attribute specifies the action taken when the committedBurst size
has been exceeded on the DLCI but the excessBurst size has not. If the
attribute is set to setDeBit, the Discard Eligibility bit in the Frame Relay
header will be turned on. If the attribute is set to none, no action will be
taken.rw Enumeration .1.3.6.1.4.1.562.36.2.1.101.5.10.1.6 |
mscFrDteDynDlciDefsIpCosThis attribute specifies the initial Class of Service (CoS) given to each
packet received on the virtual circuit identified by the DLCI. The CoS
value n is used to select Vr/<string> QosP/n. which determines the
QualityofService-Profile to be used when the packet is forwarded.
The initial CoS given to a packet by the assignedQoS attribute may be
overridden when the cosPolicyAssignment attribute is defined on the
IpPort or Ip components.
When a packet is to be transmitted on a frDte protocol port where
multiple virtual circuits are available for the packet's next hop, the
packet is forwarded using the dlci where the ipCos value matches the
CoS of the packet. When the packets's CoS does not match the ipCos
value of any of the available virtual circuits, the packet will be
forwarded using next lowest CoS; failing this, the packet will be
forwarded using the next highest CoS.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.101.5.10.1.7 |
mscFrDteStDlci OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.101.6 |
mscFrDteStDlciRowStatusTableThis entry controls the addition and deletion of
mscFrDteStDlci components. SEQUENCE OF MscFrDteStDlciRowStatusEntry .1.3.6.1.4.1.562.36.2.1.101.6.1 |
mscFrDteStDlciRowStatusEntryA single entry in the table represents a single
mscFrDteStDlci component. MscFrDteStDlciRowStatusEntry .1.3.6.1.4.1.562.36.2.1.101.6.1.1 |
mscFrDteStDlciRowStatusThis variable is used as the basis for SNMP naming of
mscFrDteStDlci components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.101.6.1.1.1 |
mscFrDteStDlciComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.101.6.1.1.2 |
mscFrDteStDlciStorageTypeThis variable represents the storage type value for the
mscFrDteStDlci tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.101.6.1.1.4 |
mscFrDteStDlciIndexThis variable represents the index for the mscFrDteStDlci tables. Integer32 .1.3.6.1.4.1.562.36.2.1.101.6.1.1.10 |
mscFrDteStDlciHq OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.101.6.2 |
mscFrDteStDlciHqRowStatusTableThis entry controls the addition and deletion of
mscFrDteStDlciHq components. SEQUENCE OF MscFrDteStDlciHqRowStatusEntry .1.3.6.1.4.1.562.36.2.1.101.6.2.1 |
mscFrDteStDlciHqRowStatusEntryA single entry in the table represents a single
mscFrDteStDlciHq component. MscFrDteStDlciHqRowStatusEntry .1.3.6.1.4.1.562.36.2.1.101.6.2.1.1 |
mscFrDteStDlciHqRowStatusThis variable is used as the basis for SNMP naming of
mscFrDteStDlciHq components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.101.6.2.1.1.1 |
mscFrDteStDlciHqComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.101.6.2.1.1.2 |
mscFrDteStDlciHqStorageTypeThis variable represents the storage type value for the
mscFrDteStDlciHq tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.101.6.2.1.1.4 |
mscFrDteStDlciHqIndexThis variable represents the index for the mscFrDteStDlciHq tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.101.6.2.1.1.10 |
mscFrDteStDlciHqProvTableThis group contains the Link Emission Queue provisioned attributes. SEQUENCE OF MscFrDteStDlciHqProvEntry .1.3.6.1.4.1.562.36.2.1.101.6.2.10 |
mscFrDteStDlciHqProvEntryAn entry in the mscFrDteStDlciHqProvTable. MscFrDteStDlciHqProvEntry .1.3.6.1.4.1.562.36.2.1.101.6.2.10.1 |
mscFrDteStDlciHqMaxPacketsThis attribute specifies the maximum number of packets allowed in the
Leq before being discarded. If this attribute is set to zero then the
maximum number of packets is calculated from the transmit data rate.
This calculated value is placed in queuePktThreshold.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.101.6.2.10.1.1 |
mscFrDteStDlciHqMaxMsecDataThis attribute specifies the maximum number of 'Milliseconds worth of
data' allowed in the Leq before packets are discarded. The
queueByteThreshold will be calculated from this attribute, based on the
transmit data rate.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.101.6.2.10.1.2 |
mscFrDteStDlciHqMaxPercentMulticastThis attribute specifies the maximum percentage of multicast packets
allowed in the Leq, based on queuePktThreshold, before being
discarded. The calculated value will be placed in
queueMulticastThreshold.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.101.6.2.10.1.3 |
mscFrDteStDlciHqTimeToLiveThis attribute specifies the 'Milliseconds Time To Live' of packets in
the Leq. If the timeToLive of a packet expires, it will be discarded.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.101.6.2.10.1.4 |
mscFrDteStDlciHqStatsTableThis group contains HibernationQueue general statistics. SEQUENCE OF MscFrDteStDlciHqStatsEntry .1.3.6.1.4.1.562.36.2.1.101.6.2.11 |
mscFrDteStDlciHqStatsEntryAn entry in the mscFrDteStDlciHqStatsTable. MscFrDteStDlciHqStatsEntry .1.3.6.1.4.1.562.36.2.1.101.6.2.11.1 |
mscFrDteStDlciHqTimedOutPktThis attribute counts the number of packets that have been discarded due
to exceeding the timeToLive. This counter will wrap around to 0 when it
exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.562.36.2.1.101.6.2.11.1.1 |
mscFrDteStDlciHqQueuePurgeDiscardsThis attribute counts the total number of packets discarded by a queue
purge which occurs when the Dlci goes down. This counter will wrap
around to 0 when it exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.562.36.2.1.101.6.2.11.1.2 |
mscFrDteStDlciHqTStatsTableThis group contains Link Emission Queue total statistics. SEQUENCE OF MscFrDteStDlciHqTStatsEntry .1.3.6.1.4.1.562.36.2.1.101.6.2.12 |
mscFrDteStDlciHqTStatsEntryAn entry in the mscFrDteStDlciHqTStatsTable. MscFrDteStDlciHqTStatsEntry .1.3.6.1.4.1.562.36.2.1.101.6.2.12.1 |
mscFrDteStDlciHqTotalPktHandledThis attribute counts the total number of packets handled by the Leq.
This counter will wrap around to 0 when it exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.562.36.2.1.101.6.2.12.1.1 |
mscFrDteStDlciHqTotalPktForwardedThis attribute counts the total number of packets forwarded by the Leq.
This counter will wrap around to 0 when it exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.562.36.2.1.101.6.2.12.1.2 |
mscFrDteStDlciHqTotalPktQueuedThis attribute counts the total number of packets that required queuing
by the Leq due to transmit congestion. This counter will wrap around to
0 when it exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.562.36.2.1.101.6.2.12.1.3 |
mscFrDteStDlciHqTotalMulticastPktThis attribute counts the total number of multicast packets handled by
this instance of FrDte. This counter will wrap around to 0 when it
exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.562.36.2.1.101.6.2.12.1.4 |
mscFrDteStDlciHqTotalPktDiscardsThis attribute counts the total number of packets that were discarded for
this instance of FrDte. This is the sum of timedOutPkt,
forcedPktDiscards, queuePurgeDiscards, pktThresholdExceeded,
byteThresholdExceeded, mulThresholdExceeded and
memThresholdExceeded. This counter will wrap around to 0 when it
exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.562.36.2.1.101.6.2.12.1.5 |
mscFrDteStDlciHqCStatsTableThis group contains Link Emission Queue current statistics. SEQUENCE OF MscFrDteStDlciHqCStatsEntry .1.3.6.1.4.1.562.36.2.1.101.6.2.13 |
mscFrDteStDlciHqCStatsEntryAn entry in the mscFrDteStDlciHqCStatsTable. MscFrDteStDlciHqCStatsEntry .1.3.6.1.4.1.562.36.2.1.101.6.2.13.1 |
mscFrDteStDlciHqCurrentPktQueuedThis attribute contains the current number of packets queued.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.101.6.2.13.1.1 |
mscFrDteStDlciHqCurrentBytesQueuedThis attribute contains the current number of bytes queued.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.101.6.2.13.1.2 |
mscFrDteStDlciHqCurrentMulticastQueuedThis attribute counts the current number of multicast packets in the
queue.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.101.6.2.13.1.3 |
mscFrDteStDlciHqThrStatsTableThis group contains Link Emission Queue threshold statistics. SEQUENCE OF MscFrDteStDlciHqThrStatsEntry .1.3.6.1.4.1.562.36.2.1.101.6.2.14 |
mscFrDteStDlciHqThrStatsEntryAn entry in the mscFrDteStDlciHqThrStatsTable. MscFrDteStDlciHqThrStatsEntry .1.3.6.1.4.1.562.36.2.1.101.6.2.14.1 |
mscFrDteStDlciHqQueuePktThresholdThis attribute is the maximum number of packets that can be contained
in the queue before being discarded. If maxPackets was set to 0 then this
attribute will contain the value that has been calculated based on the
transmit data rate. If maxPackets was set to one or more than this
attribute will contain that number.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.101.6.2.14.1.1 |
mscFrDteStDlciHqPktThresholdExceededThis attribute counts the number of packets discarded due to the
queuePktThreshold being exceeded. This counter will wrap around to 0
when it exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.562.36.2.1.101.6.2.14.1.2 |
mscFrDteStDlciHqQueueByteThresholdThis attribute is the maximum number of bytes allowed in the queue
based on maxMsecData and the transmit data rate.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.101.6.2.14.1.3 |
mscFrDteStDlciHqByteThresholdExceededThis attribute counts the number of packets discarded due to the
queueByteThreshold being exceeded. This counter will wrap around to 0
when it exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.562.36.2.1.101.6.2.14.1.4 |
mscFrDteStDlciHqQueueMulticastThresholdThis attribute is the number of multicast packets allowed in the queue
based on maxPercentMulticast and maxPackets.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.101.6.2.14.1.5 |
mscFrDteStDlciHqMulThresholdExceededThis attribute counts the number of packets discarded due to the
queueMulticastThreshold being exceeded. This counter will wrap
around to 0 when it exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.562.36.2.1.101.6.2.14.1.6 |
mscFrDteStDlciHqMemThresholdExceededThis attribute counts the number of packets discarded due to exceeding
the memory usage threshold for Leq. The memory usage threshold is
determined by the Leq software, guaranteeing that the Leq does not
consume all of the memory. This counter will wrap around to 0 when it
exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.562.36.2.1.101.6.2.14.1.7 |
mscFrDteStDlciProvTableThis group contains the provisioned attributes for a virtual circuit. These
attributes represent the default settings for the resulting Dlci components
and can be operationally changed using the corresponding attributes
under the Dlci component. SEQUENCE OF MscFrDteStDlciProvEntry .1.3.6.1.4.1.562.36.2.1.101.6.10 |
mscFrDteStDlciProvEntryAn entry in the mscFrDteStDlciProvTable. MscFrDteStDlciProvEntry .1.3.6.1.4.1.562.36.2.1.101.6.10.1 |
mscFrDteStDlciStdRowStatusThis attribute is used to manage the status of a StDlci component.
Set to active to enable the StDlci component.
Set to notInService to disable the StDlci component.
Set to createAndGo (SNMP only) to create a new StDlci component.
Set to destroy (SNMP only) to delete an existing StDlci component.rw Enumeration .1.3.6.1.4.1.562.36.2.1.101.6.10.1.1 |
mscFrDteStDlciRateEnforcementThis attribute specifies whether the CIR attributes
committedInformationRate, committedBurst, and excessBurst are used to
define rate enforcement on this user DLCI.
If rateEnforcement is enabled, and the combined Committed and Excess
burst thresholds are exceeded, the frame in violation will be discarded
immediately if a HibernationQueue subcomponent is not provisioned
under the StDlci component. If a HibernationQueue is provisioned, the
frame will be placed on the HibernationQueue at time of violation and
transmission will be attempted later after the point at which the burst
thresholds will no longer be exceeded.
Setting all the CIR attributes to zero has the same affect as setting this
attribute to disabled.rw Enumeration .1.3.6.1.4.1.562.36.2.1.101.6.10.1.2 |
mscFrDteStDlciCommittedInformationRateThe average number of bits to be transferred per second over the DLCI
to the DCE. When this attribute is set to zero, the link speed will be used
instead.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.101.6.10.1.3 |
mscFrDteStDlciCommittedBurstThe committed burst size (in bits) to which the DLCI wants to
subscribe.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.101.6.10.1.4 |
mscFrDteStDlciExcessBurstThe excess burst size (in bits) to which the DLCI wants to subscribe.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.101.6.10.1.5 |
mscFrDteStDlciExcessBurstActionThis attribute specifies the action taken when the committedBurst size
has been exceeded on the DLCI but the excessBurst size has not. If the
attribute is set to setDeBit, the Discard Eligibility bit in the Frame Relay
header will be turned on. If the attribute is set to none, no action will be
taken.rw Enumeration .1.3.6.1.4.1.562.36.2.1.101.6.10.1.6 |
mscFrDteStDlciIpCosThis attribute specifies the initial Class of Service (CoS) given to each
packet received on the virtual circuit identified by the DLCI. The CoS
value n is used to select Vr/<string> QosP/n. which determines the
QualityofService-Profile to be used when the packet is forwarded.
The initial CoS given to a packet by the assignedQoS attribute may be
overridden when the cosPolicyAssignment attribute is defined on the
IpPort or Ip components.
When a packet is to be transmitted on a frDte protocol port where
multiple virtual circuits are available for the packet's next hop, the
packet is forwarded using the dlci where the ipCos value matches the
CoS of the packet. When the packets's CoS does not match the ipCos
value of any of the available virtual circuits, the packet will be
forwarded using next lowest CoS; failing this, the packet will be
forwarded using the next highest CoS.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.101.6.10.1.7 |
mscFrDteStDlciRgLinkTableThis group provides the link between a Dlci and a remoteGroup. SEQUENCE OF MscFrDteStDlciRgLinkEntry .1.3.6.1.4.1.562.36.2.1.101.6.11 |
mscFrDteStDlciRgLinkEntryAn entry in the mscFrDteStDlciRgLinkTable. MscFrDteStDlciRgLinkEntry .1.3.6.1.4.1.562.36.2.1.101.6.11.1 |
mscFrDteStDlciLinkToRemoteGroupThis attribute associates a StDlci component with a Rg component.
Provisioned StDlci components must be linked to a Rg component
which is under the same FrDte component.rw Link .1.3.6.1.4.1.562.36.2.1.101.6.11.1.1 |
mscFrDteLeq OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.101.7 |
mscFrDteLeqRowStatusTableThis entry controls the addition and deletion of
mscFrDteLeq components. SEQUENCE OF MscFrDteLeqRowStatusEntry .1.3.6.1.4.1.562.36.2.1.101.7.1 |
mscFrDteLeqRowStatusEntryA single entry in the table represents a single
mscFrDteLeq component. MscFrDteLeqRowStatusEntry .1.3.6.1.4.1.562.36.2.1.101.7.1.1 |
mscFrDteLeqRowStatusThis variable is used as the basis for SNMP naming of
mscFrDteLeq components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.101.7.1.1.1 |
mscFrDteLeqComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.101.7.1.1.2 |
mscFrDteLeqStorageTypeThis variable represents the storage type value for the
mscFrDteLeq tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.101.7.1.1.4 |
mscFrDteLeqIndexThis variable represents the index for the mscFrDteLeq tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.101.7.1.1.10 |
mscFrDteLeqProvTableThis group contains the Link Emission Queue provisioned attributes. SEQUENCE OF MscFrDteLeqProvEntry .1.3.6.1.4.1.562.36.2.1.101.7.10 |
mscFrDteLeqProvEntryAn entry in the mscFrDteLeqProvTable. MscFrDteLeqProvEntry .1.3.6.1.4.1.562.36.2.1.101.7.10.1 |
mscFrDteLeqMaxPacketsThis attribute specifies the maximum number of packets allowed in the
Leq before being discarded. If this attribute is set to zero then the
maximum number of packets is calculated from the transmit data rate.
This calculated value is placed in queuePktThreshold.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.101.7.10.1.1 |
mscFrDteLeqMaxMsecDataThis attribute specifies the maximum number of 'Milliseconds worth of
data' allowed in the Leq before packets are discarded. The
queueByteThreshold will be calculated from this attribute, based on the
transmit data rate.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.101.7.10.1.2 |
mscFrDteLeqMaxPercentMulticastThis attribute specifies the maximum percentage of multicast packets
allowed in the Leq, based on queuePktThreshold, before being
discarded. The calculated value will be placed in
queueMulticastThreshold.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.101.7.10.1.3 |
mscFrDteLeqTimeToLiveThis attribute specifies the 'Milliseconds Time To Live' of packets in
the Leq. If the timeToLive of a packet expires, it will be discarded.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.101.7.10.1.4 |
mscFrDteLeqStatsTableThis group contains Link Emission Queue general statistics. SEQUENCE OF MscFrDteLeqStatsEntry .1.3.6.1.4.1.562.36.2.1.101.7.11 |
mscFrDteLeqStatsEntryAn entry in the mscFrDteLeqStatsTable. MscFrDteLeqStatsEntry .1.3.6.1.4.1.562.36.2.1.101.7.11.1 |
mscFrDteLeqTimedOutPktThis attribute counts the number of packets that have been discarded due
to exceeding the timeToLive. This counter will wrap around to 0 when it
exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.562.36.2.1.101.7.11.1.1 |
mscFrDteLeqHardwareForcedPktThis attribute counts the number of hardware forced packets on this
instance of FrDte. This counter will wrap around to 0 when it exceeds
its maximum count.ro Counter32 .1.3.6.1.4.1.562.36.2.1.101.7.11.1.2 |
mscFrDteLeqForcedPktDiscardsThis attribute counts the total number of hardware forced packets that
had to be discarded due to link failure. This counter will wrap around to
0 when it exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.562.36.2.1.101.7.11.1.3 |
mscFrDteLeqQueuePurgeDiscardsThis attribute counts the total number of packets discarded by a queue
purge (i.e. a discarding of all packets on the queue). This counter will
wrap around to 0 when it exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.562.36.2.1.101.7.11.1.4 |
mscFrDteLeqTStatsTableThis group contains Link Emission Queue total statistics. SEQUENCE OF MscFrDteLeqTStatsEntry .1.3.6.1.4.1.562.36.2.1.101.7.12 |
mscFrDteLeqTStatsEntryAn entry in the mscFrDteLeqTStatsTable. MscFrDteLeqTStatsEntry .1.3.6.1.4.1.562.36.2.1.101.7.12.1 |
mscFrDteLeqTotalPktHandledThis attribute counts the total number of packets handled by the Leq.
This counter will wrap around to 0 when it exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.562.36.2.1.101.7.12.1.1 |
mscFrDteLeqTotalPktForwardedThis attribute counts the total number of packets forwarded by the Leq.
This counter will wrap around to 0 when it exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.562.36.2.1.101.7.12.1.2 |
mscFrDteLeqTotalPktQueuedThis attribute counts the total number of packets that required queuing
by the Leq due to transmit congestion. This counter will wrap around to
0 when it exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.562.36.2.1.101.7.12.1.3 |
mscFrDteLeqTotalMulticastPktThis attribute counts the total number of multicast packets handled by
this instance of FrDte. This counter will wrap around to 0 when it
exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.562.36.2.1.101.7.12.1.4 |
mscFrDteLeqTotalPktDiscardsThis attribute counts the total number of packets that were discarded for
this instance of FrDte. This is the sum of timedOutPkt,
forcedPktDiscards, queuePurgeDiscards, pktThresholdExceeded,
byteThresholdExceeded, mulThresholdExceeded and
memThresholdExceeded. This counter will wrap around to 0 when it
exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.562.36.2.1.101.7.12.1.5 |
mscFrDteLeqCStatsTableThis group contains Link Emission Queue current statistics. SEQUENCE OF MscFrDteLeqCStatsEntry .1.3.6.1.4.1.562.36.2.1.101.7.13 |
mscFrDteLeqCStatsEntryAn entry in the mscFrDteLeqCStatsTable. MscFrDteLeqCStatsEntry .1.3.6.1.4.1.562.36.2.1.101.7.13.1 |
mscFrDteLeqCurrentPktQueuedThis attribute contains the current number of packets queued.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.101.7.13.1.1 |
mscFrDteLeqCurrentBytesQueuedThis attribute contains the current number of bytes queued.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.101.7.13.1.2 |
mscFrDteLeqCurrentMulticastQueuedThis attribute counts the current number of multicast packets in the
queue.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.101.7.13.1.3 |
mscFrDteLeqThrStatsTableThis group contains Link Emission Queue threshold statistics. SEQUENCE OF MscFrDteLeqThrStatsEntry .1.3.6.1.4.1.562.36.2.1.101.7.14 |
mscFrDteLeqThrStatsEntryAn entry in the mscFrDteLeqThrStatsTable. MscFrDteLeqThrStatsEntry .1.3.6.1.4.1.562.36.2.1.101.7.14.1 |
mscFrDteLeqQueuePktThresholdThis attribute is the maximum number of packets that can be contained
in the queue before being discarded. If maxPackets was set to 0 then this
attribute will contain the value that has been calculated based on the
transmit data rate. If maxPackets was set to one or more than this
attribute will contain that number.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.101.7.14.1.1 |
mscFrDteLeqPktThresholdExceededThis attribute counts the number of packets discarded due to the
queuePktThreshold being exceeded. This counter will wrap around to 0
when it exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.562.36.2.1.101.7.14.1.2 |
mscFrDteLeqQueueByteThresholdThis attribute is the maximum number of bytes allowed in the queue
based on maxMsecData and the transmit data rate.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.101.7.14.1.3 |
mscFrDteLeqByteThresholdExceededThis attribute counts the number of packets discarded due to the
queueByteThreshold being exceeded. This counter will wrap around to 0
when it exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.562.36.2.1.101.7.14.1.4 |
mscFrDteLeqQueueMulticastThresholdThis attribute is the number of multicast packets allowed in the queue
based on maxPercentMulticast and maxPackets.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.101.7.14.1.5 |
mscFrDteLeqMulThresholdExceededThis attribute counts the number of packets discarded due to the
queueMulticastThreshold being exceeded. This counter will wrap
around to 0 when it exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.562.36.2.1.101.7.14.1.6 |
mscFrDteLeqMemThresholdExceededThis attribute counts the number of packets discarded due to exceeding
the memory usage threshold for Leq. The memory usage threshold is
determined by the Leq software, guaranteeing that the Leq does not
consume all of the memory. This counter will wrap around to 0 when it
exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.562.36.2.1.101.7.14.1.7 |
mscFrDteDlci OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.101.8 |
mscFrDteDlciRowStatusTable*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This entry controls the addition and deletion of
mscFrDteDlci components. SEQUENCE OF MscFrDteDlciRowStatusEntry .1.3.6.1.4.1.562.36.2.1.101.8.1 |
mscFrDteDlciRowStatusEntryA single entry in the table represents a single
mscFrDteDlci component. MscFrDteDlciRowStatusEntry .1.3.6.1.4.1.562.36.2.1.101.8.1.1 |
mscFrDteDlciRowStatusThis variable is used as the basis for SNMP naming of
mscFrDteDlci components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.101.8.1.1.1 |
mscFrDteDlciComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.101.8.1.1.2 |
mscFrDteDlciStorageTypeThis variable represents the storage type value for the
mscFrDteDlci tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.101.8.1.1.4 |
mscFrDteDlciIndexThis variable represents the index for the mscFrDteDlci tables. Integer32 .1.3.6.1.4.1.562.36.2.1.101.8.1.1.10 |
mscFrDteDlciStateTable*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. SEQUENCE OF MscFrDteDlciStateEntry .1.3.6.1.4.1.562.36.2.1.101.8.10 |
mscFrDteDlciStateEntryAn entry in the mscFrDteDlciStateTable. MscFrDteDlciStateEntry .1.3.6.1.4.1.562.36.2.1.101.8.10.1 |
mscFrDteDlciAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.101.8.10.1.1 |
mscFrDteDlciOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.ro Enumeration .1.3.6.1.4.1.562.36.2.1.101.8.10.1.2 |
mscFrDteDlciUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.ro Enumeration .1.3.6.1.4.1.562.36.2.1.101.8.10.1.3 |
mscFrDteDlciOperTable*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This group contains the operational attributes for the Dlci component. SEQUENCE OF MscFrDteDlciOperEntry .1.3.6.1.4.1.562.36.2.1.101.8.11 |
mscFrDteDlciOperEntryAn entry in the mscFrDteDlciOperTable. MscFrDteDlciOperEntry .1.3.6.1.4.1.562.36.2.1.101.8.11.1 |
mscFrDteDlciDlciStateThis attribute reflects the current operational circuit state of the Dlci.
The state active indicates that the circuit is up and inactive that the
circuit is down. The state invalid means the circuit has been deleted by
the DCE (via Lmi).ro Enumeration .1.3.6.1.4.1.562.36.2.1.101.8.11.1.4 |
mscFrDteDlciLastTimeChangeThe last time dlciState changed state.ro EnterpriseDateAndTime .1.3.6.1.4.1.562.36.2.1.101.8.11.1.5 |
mscFrDteDlciSentFramesNumber of frames transmitted across the interface. This counter will
wrap around to 0 when it exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.562.36.2.1.101.8.11.1.7 |
mscFrDteDlciSentOctetsThe number of octets sent from this virtual circuit since it was created.
This counter will wrap around to 0 when it exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.562.36.2.1.101.8.11.1.8 |
mscFrDteDlciReceivedFramesNumber of frames received across the interface. This counter will wrap
around to 0 when it exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.562.36.2.1.101.8.11.1.9 |
mscFrDteDlciReceivedOctetsThe number of octets sent from this virtual circuit since it was created.
This counter will wrap around to 0 when it exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.562.36.2.1.101.8.11.1.10 |
mscFrDteDlciReceivedFECNsNumber of frames with the FECN bit set received from the network.
This counter will wrap around to 0 when it exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.562.36.2.1.101.8.11.1.11 |
mscFrDteDlciReceivedBECNsNumber of frames with the BECN bit set received from the network.
This counter will wrap around to 0 when it exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.562.36.2.1.101.8.11.1.12 |
mscFrDteDlciDiscardedFramesThe number of inbound frames dropped because of format errors, or
because the VC was inactive. This counter will wrap around to 0 when it
exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.562.36.2.1.101.8.11.1.13 |
mscFrDteDlciCreationTypeThis indicates whether the virtual circuit was manually created (static),
or dynamically created (dynamic) via the data link control management
interface.ro Enumeration .1.3.6.1.4.1.562.36.2.1.101.8.11.1.14 |
mscFrDteDlciCreationTimeThe time when the circuit was created, whether by the Data Link
Connection Management Interface or by an SNMP set request.ro EnterpriseDateAndTime .1.3.6.1.4.1.562.36.2.1.101.8.11.1.15 |
mscFrDteDlciRateEnforcementThis attribute specifies whether the CIR attributes
committedInformationRate, committedBurst, and excessBurst are used to
define rate enforcement on this user DLCI.
If rateEnforcement is enabled, and the combined Committed and Excess
burst thresholds are exceeded, the frame in violation will be discarded
immediately if a HibernationQueue subcomponent is not provisioned
under the StDlci component (static entries only). If a HibernationQueue
is provisioned, the frame will be placed on the HibernationQueue at
time of violation and transmission will be attempted later after the point
at which the burst thresholds will no longer be exceeded.
Setting all the CIR attributes to zero has the same affect as setting this
attribute to disabled.
Setting this attribute will operationally override the corresponding
provisional value on static entries.rw Enumeration .1.3.6.1.4.1.562.36.2.1.101.8.11.1.17 |
mscFrDteDlciCommittedInformationRateThe average number of bits to be transferred per second over the DLCI
to the DCE. When this attribute is set to zero, the link speed will be used
instead.
Setting this attribute will operationally override the corresponding
provisional value on static entries.rw Gauge32 .1.3.6.1.4.1.562.36.2.1.101.8.11.1.18 |
mscFrDteDlciCommittedBurstThe committed burst size (in bits) to which the DLCI wants to
subscribe.
Setting this attribute will operationally override the corresponding
provisional value on static entries.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.101.8.11.1.19 |
mscFrDteDlciExcessBurstThe excess burst size (in bits) to which the DLCI wants to subscribe.
Setting this attribute will operationally override the corresponding
provisional value on static entries.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.101.8.11.1.20 |
mscFrDteDlciExcessBurstActionThis attribute specifies the action taken when the committedBurst size
has been exceeded on the Dlci but the excessBurst size has not. If the
attribute is set to setDeBit, the Discard Eligibility bit in the Frame Relay
header will be turned on. If the attribute is set to none, no action will be
taken.
Setting this attribute will operationally override the corresponding
provisional value on static entries.rw Enumeration .1.3.6.1.4.1.562.36.2.1.101.8.11.1.21 |
mscFrDteVFramer OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.101.9 |
mscFrDteVFramerRowStatusTableThis entry controls the addition and deletion of
mscFrDteVFramer components. SEQUENCE OF MscFrDteVFramerRowStatusEntry .1.3.6.1.4.1.562.36.2.1.101.9.1 |
mscFrDteVFramerRowStatusEntryA single entry in the table represents a single
mscFrDteVFramer component. MscFrDteVFramerRowStatusEntry .1.3.6.1.4.1.562.36.2.1.101.9.1.1 |
mscFrDteVFramerRowStatusThis variable is used as the basis for SNMP naming of
mscFrDteVFramer components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.101.9.1.1.1 |
mscFrDteVFramerComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.101.9.1.1.2 |
mscFrDteVFramerStorageTypeThis variable represents the storage type value for the
mscFrDteVFramer tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.101.9.1.1.4 |
mscFrDteVFramerIndexThis variable represents the index for the mscFrDteVFramer tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.101.9.1.1.10 |
mscFrDteVFramerProvTableThis group contains provisionable attributes for the VirtualFramer
component. SEQUENCE OF MscFrDteVFramerProvEntry .1.3.6.1.4.1.562.36.2.1.101.9.10 |
mscFrDteVFramerProvEntryAn entry in the mscFrDteVFramerProvTable. MscFrDteVFramerProvEntry .1.3.6.1.4.1.562.36.2.1.101.9.10.1 |
mscFrDteVFramerOtherVirtualFramerThis attribute specifies the other VirtualFramer to which the service
is linked, for example, FrUni/n VirtualFramer, FrDte/n
VirtualFramer.rw Link .1.3.6.1.4.1.562.36.2.1.101.9.10.1.1 |
mscFrDteVFramerLogicalProcessorThis attribute specifies the logical processor on which the service
component will reside.rw Link .1.3.6.1.4.1.562.36.2.1.101.9.10.1.2 |
mscFrDteVFramerStateTableThis group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. SEQUENCE OF MscFrDteVFramerStateEntry .1.3.6.1.4.1.562.36.2.1.101.9.11 |
mscFrDteVFramerStateEntryAn entry in the mscFrDteVFramerStateTable. MscFrDteVFramerStateEntry .1.3.6.1.4.1.562.36.2.1.101.9.11.1 |
mscFrDteVFramerAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.101.9.11.1.1 |
mscFrDteVFramerOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.ro Enumeration .1.3.6.1.4.1.562.36.2.1.101.9.11.1.2 |
mscFrDteVFramerUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.ro Enumeration .1.3.6.1.4.1.562.36.2.1.101.9.11.1.3 |
mscFrDteVFramerStatsTableThis group contains the operational statistics data for a
VirtualFramer component. SEQUENCE OF MscFrDteVFramerStatsEntry .1.3.6.1.4.1.562.36.2.1.101.9.12 |
mscFrDteVFramerStatsEntryAn entry in the mscFrDteVFramerStatsTable. MscFrDteVFramerStatsEntry .1.3.6.1.4.1.562.36.2.1.101.9.12.1 |
mscFrDteVFramerFrmToOtherVFramerThis attribute counts the frames transmitted to the
otherVirtualFramer.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.101.9.12.1.2 |
mscFrDteVFramerFrmFromOtherVFramerThis attribute counts the frames received from the
otherVirtualFramer.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.101.9.12.1.3 |
mscFrDteVFramerOctetFromOtherVFramerThis attribute counts the octets received from the
otherVirtualFramer.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.101.9.12.1.5 |
mscFrDteCidDataTableThis group contains the attribute for a component's Customer
Identifier (CID). Refer to the attribute description for a detailed
explanation of CIDs. SEQUENCE OF MscFrDteCidDataEntry .1.3.6.1.4.1.562.36.2.1.101.20 |
mscFrDteCidDataEntryAn entry in the mscFrDteCidDataTable. MscFrDteCidDataEntry .1.3.6.1.4.1.562.36.2.1.101.20.1 |
mscFrDteCustomerIdentifierThis attribute holds the Customer Identifier (CID).
Every component has a CID. If a component has a cid attribute, the
component's CID is the provisioned value of that attribute;
otherwise the component inherits the CID of its parent. The top-
level component has a CID of 0.
Every operator session also has a CID, which is the CID
provisioned for the operator's user ID. An operator will see only the
stream data for components having a matching CID. Also, the
operator will be allowed to issue commands for only those
components which have a matching CID.
An operator CID of 0 is used to identify the Network Manager
(referred to as 'NetMan' in DPN). This CID matches the CID of
any component. Values 1 to 8191 inclusive (equivalent to 'basic
CIDs' in DPN) may be assigned to specific customers.rw Unsigned32 (0 | 1..8191) .1.3.6.1.4.1.562.36.2.1.101.20.1.1 |
mscFrDteIfEntryTableThis group contains the provisionable attributes for the ifEntry. SEQUENCE OF MscFrDteIfEntryEntry .1.3.6.1.4.1.562.36.2.1.101.21 |
mscFrDteIfEntryEntryAn entry in the mscFrDteIfEntryTable. MscFrDteIfEntryEntry .1.3.6.1.4.1.562.36.2.1.101.21.1 |
mscFrDteIfAdminStatusThe desired state of the interface. The up state indicates the
interface is operational. The down state indicates the interface is not
operational. The testing state indicates that no operational packets
can be passed.rw Enumeration .1.3.6.1.4.1.562.36.2.1.101.21.1.1 |
mscFrDteIfIndexThis is the index for the IfEntry. Its value is automatically initialized
during the provisioning process.ro InterfaceIndex .1.3.6.1.4.1.562.36.2.1.101.21.1.2 |
mscFrDteProvTableThis group contains the provisioned attributes for the FrDte component. SEQUENCE OF MscFrDteProvEntry .1.3.6.1.4.1.562.36.2.1.101.22 |
mscFrDteProvEntryAn entry in the mscFrDteProvTable. MscFrDteProvEntry .1.3.6.1.4.1.562.36.2.1.101.22.1 |
mscFrDteAcceptUndefinedDlciThis parameter allows previously undefined Data Link Connection
Identifiers (DLCIs) to be dynamically accepted in the default remote
group. If set to enabled, undefined DLCIs will be accepted, if disabled,
they will not.rw Enumeration .1.3.6.1.4.1.562.36.2.1.101.22.1.1 |
mscFrDteStateTableThis group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. SEQUENCE OF MscFrDteStateEntry .1.3.6.1.4.1.562.36.2.1.101.23 |
mscFrDteStateEntryAn entry in the mscFrDteStateTable. MscFrDteStateEntry .1.3.6.1.4.1.562.36.2.1.101.23.1 |
mscFrDteAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.101.23.1.1 |
mscFrDteOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.ro Enumeration .1.3.6.1.4.1.562.36.2.1.101.23.1.2 |
mscFrDteUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.ro Enumeration .1.3.6.1.4.1.562.36.2.1.101.23.1.3 |
mscFrDteOperStatusTableThis group includes the Operational Status attribute. This attribute
defines the current operational state of this component. SEQUENCE OF MscFrDteOperStatusEntry .1.3.6.1.4.1.562.36.2.1.101.24 |
mscFrDteOperStatusEntryAn entry in the mscFrDteOperStatusTable. MscFrDteOperStatusEntry .1.3.6.1.4.1.562.36.2.1.101.24.1 |
mscFrDteSnmpOperStatusThe current state of the interface. The up state indicates the
interface is operational and capable of forwarding packets. The
down state indicates the interface is not operational, thus unable to
forward packets. testing state indicates that no operational packets
can be passed.ro Enumeration .1.3.6.1.4.1.562.36.2.1.101.24.1.1 |
mscFrDteOperTableThis group contains the operational attributes for the FrDte component. SEQUENCE OF MscFrDteOperEntry .1.3.6.1.4.1.562.36.2.1.101.25 |
mscFrDteOperEntryAn entry in the mscFrDteOperTable. MscFrDteOperEntry .1.3.6.1.4.1.562.36.2.1.101.25.1 |
mscFrDteLinkOperStateThis attribute describes the operational state of the Link Control
protocol. If the interface to the physical link hardware is inactive, the
linkOperState is in the down state.
The polling state only occurs when the Local Management Interface
(LMI) is enabled and the physical link is active. The polling state
indicates LMI is polling for its peer. Once communication is established
the linkOperState will transition to the active state.
If the procedure attribute of the Lmi component is set to none,
linkOperState will transition to the active state once the physical link
becomes active.ro Enumeration .1.3.6.1.4.1.562.36.2.1.101.25.1.1 |
mscFrDteErrTableThis group contains the SNMP frErrEntry attributes for the FrDte
component. SEQUENCE OF MscFrDteErrEntry .1.3.6.1.4.1.562.36.2.1.101.26 |
mscFrDteErrEntryAn entry in the mscFrDteErrTable. MscFrDteErrEntry .1.3.6.1.4.1.562.36.2.1.101.26.1 |
mscFrDteErrTypeThe type of error that was last seen on this interface. The error types are
as follows:
receiveShort: This error indicates a received frame was discarded
because it was less than four octets long or it was missing the
Organizationally Unique Identifier (OUI) for a SNAP header.
receiveLong: This error indicates a received frame was discarded
because it was longer than expected. This error is currently not used on
this interface.
illegalDlci: This error indicates that a received frame was discarded
because it's Q.922 address was not two octets in length. This error could
also indicate that a frame was discarded because it was received on a
DLCI reserved for LMI which had not been provisioned active.
dlcmiProtoErr: This error indicates an LMI frame was received with
contents formatted incorrectly.
dlcmiUnknownIe: This error indicates that an LMI frame was received
which contained an unsupported Information Element (IE) type
dlcmiSequenceErr: This error indicates that an LMI frame was received
whose Keep Alive Sequence was incorrect.
dlcmiUnknownRpt: This error indicates that an LMI frame was received
which contained a Report-type Information Element with an invalid type
of report.
noErrorSinceReset: This error type indicates that there has not been an
error since the interface has been reset.
unknownError: This error type contains the cumulation of receive
frame errors that did not fit one of the MIB error descriptions above.
These errors include those counted by the following attributes:
ulpUnknownProtocol - A received frame was discarded because the
Upper Level Protocol (ULP) encapsulation used was unsupported.
badFc - A received frame was discarded because the frame control
character was incorrect.
defragSequenceErrors - A fragment was received which was discarded
due to an out of sequence error detection.ro Enumeration .1.3.6.1.4.1.562.36.2.1.101.26.1.2 |
mscFrDteErrDataAn octet string containing the first part of the frame in which an error
was last detected.ro HexString .1.3.6.1.4.1.562.36.2.1.101.26.1.3 |
mscFrDteErrTimeThe time at which the last error was detected and recorded in errType.ro EnterpriseDateAndTime .1.3.6.1.4.1.562.36.2.1.101.26.1.4 |
mscFrDteErrDiscardsNumber of inbound frames dropped because of format errors or because
the virtual circuit was not known. Format errors, in this case, are any
errors which would prevent the system from recognizing the DLCI and
placing the error in the discard category.
This counter will wrap around to 0 when it exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.562.36.2.1.101.26.1.6 |
mscFrDteErrFaultsThis attribute counts the number of times LMI has taken down the
interface. When the procedure attribute of the Lmi component is set to
none, this counter will not be incremented.
This counter will wrap around to 0 when it exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.562.36.2.1.101.26.1.7 |
mscFrDteErrFaultTimeThe last time the errFaults counter was incremented.ro EnterpriseDateAndTime .1.3.6.1.4.1.562.36.2.1.101.26.1.8 |
mscFrDteErrStatsTableThis group contains error counters for the FrDte. SEQUENCE OF MscFrDteErrStatsEntry .1.3.6.1.4.1.562.36.2.1.101.27 |
mscFrDteErrStatsEntryAn entry in the mscFrDteErrStatsTable. MscFrDteErrStatsEntry .1.3.6.1.4.1.562.36.2.1.101.27.1 |
mscFrDteXmitDiscardPvcDownCount of transmitted frames discarded because the Dlci or a component
positioned in a hierarchically fashion above it (e.g. it's remote group or
the FrDte component) was administratively disabled.
This counter will wrap around to 0 when it exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.562.36.2.1.101.27.1.1 |
mscFrDteXmitDiscardLmiInactiveCount of transmitted frames discarded because the Local Management
Interface (LMI) was not yet active (i.e. LMI was still in the polling
state).
This counter will wrap around to 0 when it exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.562.36.2.1.101.27.1.2 |
mscFrDteXmitDiscardFramerDownCount of transmitted frames discarded because the framer component
was down.
This counter will wrap around to 0 when it exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.562.36.2.1.101.27.1.3 |
mscFrDteXmitDiscardPvcInactiveCount of transmitted frames discarded because the Local Management
Interface (LMI) had inactivated or invalidated the Dlci.
This counter will wrap around to 0 when it exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.562.36.2.1.101.27.1.4 |
mscFrDteXmitDiscardCirExceededCount of transmitted frames discarded because CIR was enabled on a
Dlci without a HibernationQueue subcomponent and the traffic
exceeded the combined Committed and Excess Burst thresholds.
This counter will wrap around to 0 when it exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.562.36.2.1.101.27.1.5 |
mscFrDteRecvDiscardPvcDownCount of received frames discarded because the Dlci or a component
positioned in a hierarchically fashion above it (e.g. it's remote group or
the FrDte component) was administratively disabled.
This counter will wrap around to 0 when it exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.562.36.2.1.101.27.1.6 |
mscFrDteRecvDiscardLmiInactiveCount of received frames discarded because the Local Management
Interface (LMI) was not yet active (i.e. LMI was still in the polling
state).
This counter will wrap around to 0 when it exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.562.36.2.1.101.27.1.7 |
mscFrDteRecvDiscardPvcInactiveCount of received frames discarded because the Local Management
Interface (LMI) had inactivated or invalidated the Dlci.
This counter will wrap around to 0 when it exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.562.36.2.1.101.27.1.8 |
mscFrDteBadFcCount of received frames discarded because the frame control character
was incorrect. This may indicate that the other side of the link is
configured for a different link level protocol.
This counter will wrap around to 0 when it exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.562.36.2.1.101.27.1.9 |
mscFrDteUlpUnknownProtocolCount of received frames discarded because the Upper Level Protocol
(ULP) encapsulation used was unsupported.
This counter will wrap around to 0 when it exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.562.36.2.1.101.27.1.10 |
mscFrDteDefragSequenceErrorsCount of fragments received which were discarded due to out of
sequence error detection.
This counter will wrap around to 0 when it exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.562.36.2.1.101.27.1.11 |
mscFrDteReceiveShortCount of received frames (including LMI frames) discarded because
they were less than four octets long or they were missing the
Organizationally Unique Identifier (OUI) for a SNAP header.
This counter will wrap around to 0 when it exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.562.36.2.1.101.27.1.12 |
mscFrDteIllegalDlciCount of received frames discarded because their Q.922 address was not
two octets in length. This count also includes frames discarded because
they were received on a Dlci reserved for LMI which had not been
provisioned active.
This counter will wrap around to 0 when it exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.562.36.2.1.101.27.1.13 |
mscFrDteDlcmiProtoErrCount of received LMI frames whose contents were formatted
incorrectly.
This counter will wrap around to 0 when it exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.562.36.2.1.101.27.1.14 |
mscFrDteDlcmiUnknownIeCount of received LMI frames which contained an unsupported
Information Element (IE) type.
This counter will wrap around to 0 when it exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.562.36.2.1.101.27.1.15 |
mscFrDteDlcmiSequenceErrCount of received LMI frames whose Keep Alive Sequence was
incorrect.
This counter will wrap around to 0 when it exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.562.36.2.1.101.27.1.16 |
mscFrDteDlcmiUnknownRptCount of received LMI frames which contained a Report-type
Information Element with an invalid type of report.
This counter will wrap around to 0 when it exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.562.36.2.1.101.27.1.17 |
frameRelayDteMIB OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.32 |
IMPORTS Unknown .1.3.6.1.4.1.562.36.2.2.32 |
frameRelayDteGroup OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.32.1 |
frameRelayDteGroupCA OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.32.1.1 |
frameRelayDteGroupCA02 OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.32.1.1.3 |
frameRelayDteGroupCA02A OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.32.1.1.3.2 |
frameRelayDteCapabilities OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.32.3 |
frameRelayDteCapabilitiesCA OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.32.3.1 |
frameRelayDteCapabilitiesCA02 OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.32.3.1.3 |
frameRelayDteCapabilitiesCA02A OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.32.3.1.3.2 |