Nortel-MsCarrier-MscPassport-FrameRelayAtmMIB
AI MIB Summary
Standard SNMP MIB module defining data structures for Nortel-MsCarrier-MscPassport-FrameRelayAtmMIB.
515
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
515 total| Object Name |
|---|
mscFrAtm OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.72 |
mscFrAtmRowStatusTableThis entry controls the addition and deletion of
mscFrAtm components. SEQUENCE OF MscFrAtmRowStatusEntry .1.3.6.1.4.1.562.36.2.1.72.1 |
mscFrAtmRowStatusEntryA single entry in the table represents a single
mscFrAtm component. MscFrAtmRowStatusEntry .1.3.6.1.4.1.562.36.2.1.72.1.1 |
mscFrAtmRowStatusThis variable is used as the basis for SNMP naming of
mscFrAtm components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.72.1.1.1 |
mscFrAtmComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.72.1.1.2 |
mscFrAtmStorageTypeThis variable represents the storage type value for the
mscFrAtm tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.72.1.1.4 |
mscFrAtmIndexThis variable represents the index for the mscFrAtm tables. Integer32 .1.3.6.1.4.1.562.36.2.1.72.1.1.10 |
mscFrAtmFramer OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.72.2 |
mscFrAtmFramerRowStatusTableThis entry controls the addition and deletion of
mscFrAtmFramer components. SEQUENCE OF MscFrAtmFramerRowStatusEntry .1.3.6.1.4.1.562.36.2.1.72.2.1 |
mscFrAtmFramerRowStatusEntryA single entry in the table represents a single
mscFrAtmFramer component. MscFrAtmFramerRowStatusEntry .1.3.6.1.4.1.562.36.2.1.72.2.1.1 |
mscFrAtmFramerRowStatusThis variable is used as the basis for SNMP naming of
mscFrAtmFramer components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.72.2.1.1.1 |
mscFrAtmFramerComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.72.2.1.1.2 |
mscFrAtmFramerStorageTypeThis variable represents the storage type value for the
mscFrAtmFramer tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.72.2.1.1.4 |
mscFrAtmFramerIndexThis variable represents the index for the mscFrAtmFramer tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.72.2.1.1.10 |
mscFrAtmFramerProvTableThis group contains the base provisioning data for the Framer
component. Application or hardware interface specific provisioning
data is contained in other provisionable Framer groups. SEQUENCE OF MscFrAtmFramerProvEntry .1.3.6.1.4.1.562.36.2.1.72.2.10 |
mscFrAtmFramerProvEntryAn entry in the mscFrAtmFramerProvTable. MscFrAtmFramerProvEntry .1.3.6.1.4.1.562.36.2.1.72.2.10.1 |
mscFrAtmFramerInterfaceNameThis attribute contains a hardware component name.
The attribute associates the application with a specific link. This
defines the module processor on which Framer's parent component
(as well as Framer itself) will run.rw Link .1.3.6.1.4.1.562.36.2.1.72.2.10.1.1 |
mscFrAtmFramerLinkTableThis group contains attributes defining the framing of data on the
link interface. SEQUENCE OF MscFrAtmFramerLinkEntry .1.3.6.1.4.1.562.36.2.1.72.2.11 |
mscFrAtmFramerLinkEntryAn entry in the mscFrAtmFramerLinkTable. MscFrAtmFramerLinkEntry .1.3.6.1.4.1.562.36.2.1.72.2.11.1 |
mscFrAtmFramerDataInversionThis attribute determines whether data bits are to be inverted (1 to 0
and 0 to 1) before transmission of frames to the interface. If the
value of this attribute is On, the incoming data bits will also be
inverted when frames are received from the link before being
processed.
This option is typically used in hdlc framing mode when inversion
is used to guarantee 1's density.
Note that aborts (in hdlc and interrupting modes) are corrupted
when data is inverted.
This attribute may only take its default value for non-MSA cards.rw Enumeration .1.3.6.1.4.1.562.36.2.1.72.2.11.1.2 |
mscFrAtmFramerFrameCrcTypeThis attribute defines the type of CRC used.
The CRC value calculated is appended to the end of the frames
transmitted to the link. The CRC value is removed from the end of
frames received from the link and checked for correctness.
NoCrc means that CRC is not used.
This attribute may take only its default value for non-MSA cards.rw Enumeration .1.3.6.1.4.1.562.36.2.1.72.2.11.1.3 |
mscFrAtmFramerFlagsBetweenFramesThis attribute defines the number of flags that are inserted between
frames sent to the link interface.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.72.2.11.1.4 |
mscFrAtmFramerStateTableThis group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. SEQUENCE OF MscFrAtmFramerStateEntry .1.3.6.1.4.1.562.36.2.1.72.2.12 |
mscFrAtmFramerStateEntryAn entry in the mscFrAtmFramerStateTable. MscFrAtmFramerStateEntry .1.3.6.1.4.1.562.36.2.1.72.2.12.1 |
mscFrAtmFramerAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.72.2.12.1.1 |
mscFrAtmFramerOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.ro Enumeration .1.3.6.1.4.1.562.36.2.1.72.2.12.1.2 |
mscFrAtmFramerUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.ro Enumeration .1.3.6.1.4.1.562.36.2.1.72.2.12.1.3 |
mscFrAtmFramerStatsTableThis group contains the operational statistics data for a Framer
component. SEQUENCE OF MscFrAtmFramerStatsEntry .1.3.6.1.4.1.562.36.2.1.72.2.13 |
mscFrAtmFramerStatsEntryAn entry in the mscFrAtmFramerStatsTable. MscFrAtmFramerStatsEntry .1.3.6.1.4.1.562.36.2.1.72.2.13.1 |
mscFrAtmFramerFrmToIfThe number of frames transmitted to the link interface by Framer.
Note: This does not include the number of frames transmitted
directly to the hardware queue, thus bypassing the Framer
component.roobsolete Counter32 .1.3.6.1.4.1.562.36.2.1.72.2.13.1.1 |
mscFrAtmFramerFrmFromIfThe number of frames received from the link interface by Framer.roobsolete Counter32 .1.3.6.1.4.1.562.36.2.1.72.2.13.1.2 |
mscFrAtmFramerOctetFromIfThe number of bytes received from the link interface by Framer.roobsolete Counter32 .1.3.6.1.4.1.562.36.2.1.72.2.13.1.3 |
mscFrAtmFramerAbortsThis attribute is the total number of aborts received.ro Counter32 .1.3.6.1.4.1.562.36.2.1.72.2.13.1.4 |
mscFrAtmFramerCrcErrorsThis attribute is the total number of frames with CRC errors,
occurring in the receive direction from the link.ro Counter32 .1.3.6.1.4.1.562.36.2.1.72.2.13.1.5 |
mscFrAtmFramerLrcErrorsThis attribute is the total number of frames with LRC errors,
occurring in the Tx link prior to transmission onto the link.ro Counter32 .1.3.6.1.4.1.562.36.2.1.72.2.13.1.6 |
mscFrAtmFramerNonOctetErrorsThis attribute is the total number of frames that were non octet
aligned.ro Counter32 .1.3.6.1.4.1.562.36.2.1.72.2.13.1.7 |
mscFrAtmFramerOverrunsThis attribute is the total number of frames received from the link
for which overruns occurred.ro Counter32 .1.3.6.1.4.1.562.36.2.1.72.2.13.1.8 |
mscFrAtmFramerUnderrunsThis attribute is the total number of frames transmitted to the link
for which underruns occurred.ro Counter32 .1.3.6.1.4.1.562.36.2.1.72.2.13.1.9 |
mscFrAtmFramerLargeFrmErrorsThis attribute is the total number of frames received which were too
large. The frame execeeded the maximumFrameLengthLimit
provisioned attribute or it contained more than the 255 block
hardware limit.ro Counter32 .1.3.6.1.4.1.562.36.2.1.72.2.13.1.10 |
mscFrAtmFramerFrmModeErrorsThis attribute is the total number of frames detected with framing
mode errors. A framingModeError is flagged when frames are
inconsistent with the specified framingType, that is when
interrupting frames are used while running in hdlc mode.ro Counter32 .1.3.6.1.4.1.562.36.2.1.72.2.13.1.11 |
mscFrAtmFramerFrmToIf64The number of frames transmitted to the link interface by Framer.
Note: This does not include the number of frames transmitted
directly to the hardware queue, thus bypassing the Framer
component.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.72.2.13.1.14 |
mscFrAtmFramerFrmFromIf64The number of frames received from the link interface by Framer.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.72.2.13.1.15 |
mscFrAtmFramerOctetFromIf64The number of bytes received from the link interface by Framer.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.72.2.13.1.16 |
mscFrAtmFramerUtilTableThis group contains the link utilizaiton operational data for a
Framer component. SEQUENCE OF MscFrAtmFramerUtilEntry .1.3.6.1.4.1.562.36.2.1.72.2.14 |
mscFrAtmFramerUtilEntryAn entry in the mscFrAtmFramerUtilTable. MscFrAtmFramerUtilEntry .1.3.6.1.4.1.562.36.2.1.72.2.14.1 |
mscFrAtmFramerNormPrioLinkUtilToIfThis attribute is the utilization of the normal and high priority data
traffic (interruptable traffic) sent to the link as a percentage of the
available bandwidth on the link. Note that this indluces traffic with
Transfer Priorities (TP) of 0, 6 and 9 and/or Emission Priority of 2
and 3. The utilization is the average for the last minute.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.72.2.14.1.1 |
mscFrAtmFramerNormPrioLinkUtilFromIfThis attribute is the utilization of the normal and high priority data
traffic (interruptable traffic) received from the link as a percentage
of the available bandwidth on the link. Note that this includes traffic
with Transfer Priorities (TP) of 0, 6 and 9 and/or Emission Priority
of 2 and 3. The utilization is the average for the last minute.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.72.2.14.1.3 |
mscFrAtmLmi OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.72.3 |
mscFrAtmLmiRowStatusTableThis entry controls the addition and deletion of
mscFrAtmLmi components. SEQUENCE OF MscFrAtmLmiRowStatusEntry .1.3.6.1.4.1.562.36.2.1.72.3.1 |
mscFrAtmLmiRowStatusEntryA single entry in the table represents a single
mscFrAtmLmi component. MscFrAtmLmiRowStatusEntry .1.3.6.1.4.1.562.36.2.1.72.3.1.1 |
mscFrAtmLmiRowStatusThis variable is used as the basis for SNMP naming of
mscFrAtmLmi components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.72.3.1.1.1 |
mscFrAtmLmiComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.72.3.1.1.2 |
mscFrAtmLmiStorageTypeThis variable represents the storage type value for the
mscFrAtmLmi tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.72.3.1.1.4 |
mscFrAtmLmiIndexThis variable represents the index for the mscFrAtmLmi tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.72.3.1.1.10 |
mscFrAtmLmiParmsTableThis group contains the provisionable attributes of the LMI
component. SEQUENCE OF MscFrAtmLmiParmsEntry .1.3.6.1.4.1.562.36.2.1.72.3.10 |
mscFrAtmLmiParmsEntryAn entry in the mscFrAtmLmiParmsTable. MscFrAtmLmiParmsEntry .1.3.6.1.4.1.562.36.2.1.72.3.10.1 |
mscFrAtmLmiProceduresThis attribute selects the procedures to be used for the Local
Management Interface. The following procedures are supported:
none: no Local Management Interface procedures are running on
this interface. This accommodates Frame Relay user equipment that
has not implemented any LMI procedures. The remaining attributes
of this group are ignored.
vendorForum: Local Management Interface procedures from the
Vendor Forum specification are supported on this interface. DLCI
1023 is used for the LMI protocol. This value cannot be used if the
side attribute is both.
ansi: Local Management Interface procedures from the ANSI
specification are supported. DLCI 0 is used for the LMI protocol.
itu: Local Management Interface procedures from the ITU-T
specification are supported. DLCI 0 is used for the LMI protocol.
Was previously ccitt.
autoConfigure: The interface determines automatically which
Local Management Interface procedures to use. This value cannot
be used if the side attribute is user.
The procedures currently in use can be seen in the operational
attribute opProcedures.rw Enumeration .1.3.6.1.4.1.562.36.2.1.72.3.10.1.1 |
mscFrAtmLmiAsyncStatusReportThis attribute selects the use of asynchronous PVC status report
procedures as specified in ANSI, CCITT, and Vendor Forum.
This attribute can be set to on or off. If procedures is set to none,
this attribute is ignored.rw Enumeration .1.3.6.1.4.1.562.36.2.1.72.3.10.1.2 |
mscFrAtmLmiErrorEventThresholdAn event is defined as follows: (1) receipt of a STATUS ENQUIRY
message; or (2) expiration of timer T392. An error event is (1)
nonreceipt of STATUS ENQUIRY in T392 seconds; (2) invalid
contents of a LMI message; (3) invalid receive sequence number.
This attribute specifies the number of error events which, if they
occur within eventCount events, cause a protocol error condition.
The condition is cleared after eventCount sequential correct events
occur. This attribute corresponds to the nN2 parameter described in
the Vendor Forum Specification.
It must be less than or equal to eventCount.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.72.3.10.1.3 |
mscFrAtmLmiEventCountThis attribute specifies the number of contiguous events within
which no more than eventErrorThreshold error events are allowed.
This attribute corresponds to the nN3 parameter described in the
Vendor Forum Specification.
It must be greater than or equal to errorEventThreshold.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.72.3.10.1.4 |
mscFrAtmLmiCheckPointTimerThis attribute selects the time (in seconds) within which a STATUS
ENQUIRY message is expected. This attribute corresponds to the
nT2 parameter described in the Vendor Forum Specification.
It must be less than messageCountTimer.rw Unsigned32 (5 | 10 | 15 | 20 | 25 | 30) .1.3.6.1.4.1.562.36.2.1.72.3.10.1.5 |
mscFrAtmLmiMessageCountTimerThis attribute selects the time (in seconds) within which at most five
(this is a fixed value and corresponds to maximum message count in
VendorForum) STATUS ENQUIRY messages are expected. This
attribute applies only when the lmiProcedures is set to
vendorForum.
messageCountTimer must always be greater than checkPointTimer.rw Unsigned32 (5 | 10 | 15 | 20 | 25 | 30) .1.3.6.1.4.1.562.36.2.1.72.3.10.1.6 |
mscFrAtmLmiIgnoreActiveBitThis attribute specifies whether the Frame Relay LMI Active Bit
(A-bit) has a bearing on the transfer of user data across this Frame
Relay interface for both directions of traffic flow.
When this attribute is set to yes, the A-bit status of a user DLCI
connection does not affect data transfer.
When this attribute is set to no, data received from the local
interface will be discarded if an A-bit =0 condition exists towards
the local user. Data being sent to the local interface is discarded if
an A-bit = 0 condition exists towards the subnet.rw Enumeration .1.3.6.1.4.1.562.36.2.1.72.3.10.1.7 |
mscFrAtmLmiSideThis attribute can be set to user, network, or both.
When this attribute is set to user, USP LMI procedures are running.
When this attribute is set to network, NSP LMI procedures are
running. When this attribute is set to both, USPNSP LMI
procedures are running.
When the value is both, the procedures attribute must not be set to
vendorForum.
Setting the value to user when the procedures attribute is set to
autoConfigure is disallowed semantically.rw Enumeration .1.3.6.1.4.1.562.36.2.1.72.3.10.1.8 |
mscFrAtmLmiPvcConfigParmsInFsrWhen this attribute is set to yes, additional Q.933 information
elements are included in the LMI Full Status message to facilitate
CPE PVC parameter configuring.
When set to yes, the Check Prov command fails if the Lmi side is
not set to network.
When set to yes, Check Prov fails if the number of DLCIs on the
FrUni is greater than 300.
If the service is not a FrUni this attribute is ignored.rw Enumeration .1.3.6.1.4.1.562.36.2.1.72.3.10.1.9 |
mscFrAtmLmiStateTableThis group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. SEQUENCE OF MscFrAtmLmiStateEntry .1.3.6.1.4.1.562.36.2.1.72.3.11 |
mscFrAtmLmiStateEntryAn entry in the mscFrAtmLmiStateTable. MscFrAtmLmiStateEntry .1.3.6.1.4.1.562.36.2.1.72.3.11.1 |
mscFrAtmLmiAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.72.3.11.1.1 |
mscFrAtmLmiOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.ro Enumeration .1.3.6.1.4.1.562.36.2.1.72.3.11.1.2 |
mscFrAtmLmiUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.ro Enumeration .1.3.6.1.4.1.562.36.2.1.72.3.11.1.3 |
mscFrAtmLmiPsiTableThis group provides the protocol status of the Local Management
Interface. SEQUENCE OF MscFrAtmLmiPsiEntry .1.3.6.1.4.1.562.36.2.1.72.3.12 |
mscFrAtmLmiPsiEntryAn entry in the mscFrAtmLmiPsiTable. MscFrAtmLmiPsiEntry .1.3.6.1.4.1.562.36.2.1.72.3.12.1 |
mscFrAtmLmiProtocolStatusThis attribute indicates whether the LMI is in an error condition or
whether the LMI procedures are behaving normally. When
operating with no LMI protocol, this attribute is always set to
normalCondition. When operating with LMI procedures, this
attribute is set to errorCondition after n392 of the last n393 events
are in error. The consequence of an errorCondition is that all
DLCIs on this interface will become inactive in both directions. The
errorCondition is cleared and a normalCondition is indicated when
a sufficient number of events have occurred without error. In ANSI,
this occurs when n393 consecutive good events take place.
If the procedures attribute is set to autoConfigure, this attribute is
set to configuring while adaptive LMI determines which LMI
procedures are running on the link. A single LMI error event during
auto configuration causes the attribute value to change to
errorCondition. If during configuring no LMI message is received,
an LMI errorCondition is raised after n392 x t392 seconds.ro Enumeration .1.3.6.1.4.1.562.36.2.1.72.3.12.1.1 |
mscFrAtmLmiOpProceduresThe opProcedures attribute indicates the procedures being used for
the Local Management Interface. This attribute should be ignored if
protocolStatus is not normalCondition. The following procedures
are supported:
none: Local Management Interface procedures are not running on
this interface. This accommodates Frame Relay user equipment that
has not implemented any LMI procedures.
vendorForum: Local Management Interface procedures from the
Vendor Forum specification are running on this interface. DLCI
1023 is used for the LMI protocol.
ansi: Local Management Interface procedures from the ANSI
specification are running. DLCI 0 is used for the LMI protocol.
itu: Local Management Interface procedures from the ITU-T
specification are running. DLCI 0 is used for the LMI protocol. Was
previously ccitt.
unknown: Local Management Interface procedures have yet to be
determined by Adaptive LMI.ro Enumeration .1.3.6.1.4.1.562.36.2.1.72.3.12.1.2 |
mscFrAtmLmiStatsTableThis group contains the operational statistics for the Frame Relay
Local Management Interface. SEQUENCE OF MscFrAtmLmiStatsEntry .1.3.6.1.4.1.562.36.2.1.72.3.13 |
mscFrAtmLmiStatsEntryAn entry in the mscFrAtmLmiStatsTable. MscFrAtmLmiStatsEntry .1.3.6.1.4.1.562.36.2.1.72.3.13.1 |
mscFrAtmLmiKeepAliveStatusToIfThis attribute counts the number of Local Management Interface
keep alive status messages sent to the external user device in
response to a status enquiry for keep alive status. When the
maximum count is exceeded it wraps to zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.72.3.13.1.1 |
mscFrAtmLmiFullStatusToIfThis attribute counts the number of Local Management Interface
full status messages sent to the external user device in response to a
status enquiry for keep alive or full status. When the maximum
count is reached it wraps to zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.72.3.13.1.2 |
mscFrAtmLmiKeepAliveStatusEnqFromIfThis attribute counts the number of Local Management Interface
valid keep alive status enquiry messages received from the external
user device. When the maximum count is reached it wraps to zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.72.3.13.1.3 |
mscFrAtmLmiFullStatusEnqFromIfThis attribute counts the number of Local Management Interface
valid full status enquiry messages received from the external user
device. When the maximum count is reached it wraps to zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.72.3.13.1.4 |
mscFrAtmLmiNetworkSideEventHistoryThis attribute displays the Local Management Interface network
side procedure event history in order of occurrence. An event is
represented by a single symbol. A '+' symbol indicates a good
event. An 'X' symbol indicates a protocol error event. The leftmost
event is the most recent to occur. The provisioned eventCount (nN3/
N393) dictates the maximum number of events displayed. A good
event is triggered by receipt of a valid status enquiry message. An
error event is one of three possibilities, either a nT2/T392 timer
expiry, receipt of a status enquiry message with bad sequence
numbers, or when lmiProcedures is provisioned to vendorForum
and we receive more than nN4 status enquiry messages within the
provisioned messageCountTimer (nT3).ro AsciiString .1.3.6.1.4.1.562.36.2.1.72.3.13.1.5 |
mscFrAtmLmiProtocolErrorsThis attribute counts the number of Local Management Interface
protocol errors. It is the sum of the sequence (sequenceErrors),
timeout (pollingVerifTimeouts) and too many status enquiry
messages received within the messageCountTimer (nT3) errors. The
too many status enquiries error only applies when lmiProcedures is
set to vendorForum. When the maximum count is exceeded it
wraps to zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.72.3.13.1.6 |
mscFrAtmLmiUnexpectedIesThis attribute counts the number of Local Management Interface
frames received with an Information Element identifier that is
unknown or unexpected. An unexpected Information Element is not
a protocol error. When the maximum count is reached, this counter
wraps to zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.72.3.13.1.7 |
mscFrAtmLmiSequenceErrorsThis attribute counts the number of Local Management Interface
Status Enquiry message sequence errors. A sequence error is receipt
of a Status Enquiry message with a receive sequence number not
equal to the last send sequence number. When the maximum count
is reached the counter wraps to zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.72.3.13.1.8 |
mscFrAtmLmiUnexpectedReportsThis attribute counts the number of Local Management Interface
frames received with an unknown or unexpected report type. An
unexpected report type is not a protocol error. When the maximum
count is reached the counter wraps to zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.72.3.13.1.9 |
mscFrAtmLmiPollingVerifTimeoutsThis attribute counts the number of checkPointTImer (t392) timer
expiries occurring on the Local Management Interface. When the
maximum count is reached the counter wraps to zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.72.3.13.1.10 |
mscFrAtmLmiKeepAliveEnqToIfThis attribute counts the number of Local Management Interface
keep alive enquiry status messages sent to the external user device
for keep alive status. When the maximum count is reached it wraps
to zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.72.3.13.1.11 |
mscFrAtmLmiFullStatusEnqToIfThis attribute counts the number of Local Management Interface
full status messages sent to the external user device in response to a
status enquiry for keep alive or full status. When the maximum
count is reached it wraps to zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.72.3.13.1.12 |
mscFrAtmLmiUserSideEventHistoryThis attribute displays the Local Management Interface user side
procedure event history in order of occurrence. An event is
represented by a single symbol. A '+' symbol indicates a good
event. An 'X' symbol indicates a protocol error event. The left most
event is the most recent to occur. The provisioned eventCount (nN3/
N393) dictates the maximum number of events displayed. A good
event is triggered by receipt of a valid status message. An error
event is either a nT1/T391 timer expiry or receipt of a status
message with bad sequence numbers.ro AsciiString .1.3.6.1.4.1.562.36.2.1.72.3.13.1.13 |
mscFrAtmLmiStatusSequenceErrorsThis attribute counts the number of Local Management Interface
Status message sequence errors. A sequence error is receipt of a
Status message with a receive sequence number not equal to the last
send sequence number. When the maximum count is reached the
counter wraps to zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.72.3.13.1.14 |
mscFrAtmLmiNoStatusReportCountThis attribute counts the number of times when no status report or
an invalid status report comes from the external network. This
attribute is incremented in two cases:
i) after a status enquiry is sent out and T391 timer expires without
having a status report received.
ii) an invalid status report is received.
When the maximum count is reached it wraps to zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.72.3.13.1.15 |
mscFrAtmLmiUspParmsTableThis group contains the provisionable attributes of the Local
Management Interface user side procedure. SEQUENCE OF MscFrAtmLmiUspParmsEntry .1.3.6.1.4.1.562.36.2.1.72.3.14 |
mscFrAtmLmiUspParmsEntryAn entry in the mscFrAtmLmiUspParmsTable. MscFrAtmLmiUspParmsEntry .1.3.6.1.4.1.562.36.2.1.72.3.14.1 |
mscFrAtmLmiFullStatusPollingCyclesThis attribute specifies how frequently the Frame Relay UNI service
should initiate a Status Enquiry for a full PVC status report. A
polling cycle is a Status Enquiry and Status Report exchange.
This attribute is used only if the side attribute is either user or both.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.72.3.14.1.1 |
mscFrAtmLmiLinkVerificationTimerThis attribute specifies how frequently the Frame Relay UNI service
should initiate a Status Enquiry for link integrity verification. It
must be less than checkPointTimer (t392).
When the Lmi side is network, this attribute is ignored.rw Unsigned32 (5 | 10 | 15 | 20 | 25 | 30) .1.3.6.1.4.1.562.36.2.1.72.3.14.1.2 |
mscFrAtmDlci OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.72.4 |
mscFrAtmDlciRowStatusTableThis entry controls the addition and deletion of
mscFrAtmDlci components. SEQUENCE OF MscFrAtmDlciRowStatusEntry .1.3.6.1.4.1.562.36.2.1.72.4.1 |
mscFrAtmDlciRowStatusEntryA single entry in the table represents a single
mscFrAtmDlci component. MscFrAtmDlciRowStatusEntry .1.3.6.1.4.1.562.36.2.1.72.4.1.1 |
mscFrAtmDlciRowStatusThis variable is used as the basis for SNMP naming of
mscFrAtmDlci components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.72.4.1.1.1 |
mscFrAtmDlciComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.72.4.1.1.2 |
mscFrAtmDlciStorageTypeThis variable represents the storage type value for the
mscFrAtmDlci tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.72.4.1.1.4 |
mscFrAtmDlciIndexThis variable represents the index for the mscFrAtmDlci tables. Integer32 .1.3.6.1.4.1.562.36.2.1.72.4.1.1.10 |
mscFrAtmDlciSp OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.72.4.2 |
mscFrAtmDlciSpRowStatusTableThis entry controls the addition and deletion of
mscFrAtmDlciSp components. SEQUENCE OF MscFrAtmDlciSpRowStatusEntry .1.3.6.1.4.1.562.36.2.1.72.4.2.1 |
mscFrAtmDlciSpRowStatusEntryA single entry in the table represents a single
mscFrAtmDlciSp component. MscFrAtmDlciSpRowStatusEntry .1.3.6.1.4.1.562.36.2.1.72.4.2.1.1 |
mscFrAtmDlciSpRowStatusThis variable is used as the basis for SNMP naming of
mscFrAtmDlciSp components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.72.4.2.1.1.1 |
mscFrAtmDlciSpComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.72.4.2.1.1.2 |
mscFrAtmDlciSpStorageTypeThis variable represents the storage type value for the
mscFrAtmDlciSp tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.72.4.2.1.1.4 |
mscFrAtmDlciSpIndexThis variable represents the index for the mscFrAtmDlciSp tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.72.4.2.1.1.10 |
mscFrAtmDlciSpProvTableThis group contains the provisionable attributes for the Data Link
Connection Identifier. These attributes reflect the service parameters
specific to this instance of DLCI. The congestion control attributes
in this group are defined in T1.606 Addendum 1. SEQUENCE OF MscFrAtmDlciSpProvEntry .1.3.6.1.4.1.562.36.2.1.72.4.2.10 |
mscFrAtmDlciSpProvEntryAn entry in the mscFrAtmDlciSpProvTable. MscFrAtmDlciSpProvEntry .1.3.6.1.4.1.562.36.2.1.72.4.2.10.1 |
mscFrAtmDlciSpMaximumFrameSizeThis attribute specifies the maximum number of octets which may
be included in the information field. The Frame Relay header and
CRC octets are not included in this definition. This attribute
corresponds to the dN1 parameter described in the Vendor Forum
Specification.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.72.4.2.10.1.1 |
mscFrAtmDlciSpRateEnforcementThis attribute specifies whether rate enforcement is in effect for this
user data link connection.
When rateEnforcement is on, the CIR and De=1 traffic will be
measured and enforced.
When rateEnforcement is off, all frames from the user are accepted
and no modifications to the frame with respect to the De bit will be
made.rw Enumeration .1.3.6.1.4.1.562.36.2.1.72.4.2.10.1.2 |
mscFrAtmDlciSpCommittedInformationRateThis attribute specifies the committed information rate (CIR). It
represents the rate at which the network agrees to transfer
information under normal conditions when rate enforcement is in
effect.
When rate enforcement is not in effect, this attribute is ignored.
Determination of the actual CIR is based on
committedInformationRate, committedBurstSize and a measurement
interval. The measurement interval is determined internally when
committedInformationRate has a non-zero value. Otherwise, it is
based on measurementInterval which must be explicitly
provisioned.
Note: The committedBurstSize must have a value of 0 when rate
enforcement is in effect and committedInformationRate has a value
of 0.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.72.4.2.10.1.3 |
mscFrAtmDlciSpCommittedBurstSizeThis attribute specifies the committed burst size (Bc). It represents
the amount of data that a network agrees to transfer under normal
conditions over a measurement interval when rate enforcement is in
effect. Data marked DE=1 is not accounted for in the committed
burst size.
When rate enforcement is not in effect, this attribute is ignored.
Note: The committedInformationRate must have a value of 0 when
rate enforcement is in effect and committedBurstSize has a value of
0.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.72.4.2.10.1.4 |
mscFrAtmDlciSpExcessBurstSizeThis attribute specifies the excess burst size (Be). It represents the
amount of uncommitted data that the network will attempt to deliver
over a measurement interval when rate enforcement is in effect.
Data marked DE=1 by the user or by the network is accounted for
here.
committedInformationRate, committedBurstSize, and
excessBurstSize cannot all be zero when rate enforcement is in
effect.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.72.4.2.10.1.5 |
mscFrAtmDlciSpMeasurementIntervalThis attribute specifies the time interval over which rates and burst
sizes are measured when rate enforcement is in effect.
When rate enforcement is in effect and both
committedInformationRate and committedBurstSize have values of
zero, this attribute must have a non-zero value.
When rate enforcement is not in effect or when
committedInformationRate and committedBurstSize have non-zero
values, this attribute is ignored.
When committedInformationRate and committedBurstSize have
non-zero values, the time interval is internally calculated. In this
situation, measurementInterval is ignored, and it does not represent
the time interval.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.72.4.2.10.1.6 |
mscFrAtmDlciSpEmissionPriorityToIfThis attribute specifies the emission priority of frames sent to the
interface.
The high priority frames in the high priority frame queue will be
served before the low priority frames in the low priority queue.
This attribute is obsoleted. During migration, its value will be
transferred to emissionPriToIf.rwobsolete Enumeration .1.3.6.1.4.1.562.36.2.1.72.4.2.10.1.7 |
mscFrAtmDlciSpEmissionPrioToIfThis attribute specifies the emission priority of frames sent to the
interface.
Frames in a higher priority queue will be sent before frames in a
lower priority queue.
The value of this attribute must be greater than or equal to 0, and
less than the value of the provisionable attribute
numberOfEmissionQs.rwobsolete INTEGER (0 | 1 | 2 | 3) .1.3.6.1.4.1.562.36.2.1.72.4.2.10.1.8 |
mscFrAtmDlciSpAccountingThis attribute allows the operator to control accounting for this
DLCI. To enable accounting data collection and record generation,
the value of this attribute must be on and at least one of the
accountCollection reasons in the FrAtm Ca component must be set.rw Enumeration .1.3.6.1.4.1.562.36.2.1.72.4.2.10.1.9 |
mscFrAtmDlciSiwf OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.72.4.3 |
mscFrAtmDlciSiwfRowStatusTableThis entry controls the addition and deletion of
mscFrAtmDlciSiwf components. SEQUENCE OF MscFrAtmDlciSiwfRowStatusEntry .1.3.6.1.4.1.562.36.2.1.72.4.3.1 |
mscFrAtmDlciSiwfRowStatusEntryA single entry in the table represents a single
mscFrAtmDlciSiwf component. MscFrAtmDlciSiwfRowStatusEntry .1.3.6.1.4.1.562.36.2.1.72.4.3.1.1 |
mscFrAtmDlciSiwfRowStatusThis variable is used as the basis for SNMP naming of
mscFrAtmDlciSiwf components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.72.4.3.1.1.1 |
mscFrAtmDlciSiwfComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.72.4.3.1.1.2 |
mscFrAtmDlciSiwfStorageTypeThis variable represents the storage type value for the
mscFrAtmDlciSiwf tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.72.4.3.1.1.4 |
mscFrAtmDlciSiwfIndexThis variable represents the index for the mscFrAtmDlciSiwf tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.72.4.3.1.1.10 |
mscFrAtmDlciSiwfSd OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.72.4.3.2 |
mscFrAtmDlciSiwfSdRowStatusTableThis entry controls the addition and deletion of
mscFrAtmDlciSiwfSd components. SEQUENCE OF MscFrAtmDlciSiwfSdRowStatusEntry .1.3.6.1.4.1.562.36.2.1.72.4.3.2.1 |
mscFrAtmDlciSiwfSdRowStatusEntryA single entry in the table represents a single
mscFrAtmDlciSiwfSd component. MscFrAtmDlciSiwfSdRowStatusEntry .1.3.6.1.4.1.562.36.2.1.72.4.3.2.1.1 |
mscFrAtmDlciSiwfSdRowStatusThis variable is used as the basis for SNMP naming of
mscFrAtmDlciSiwfSd components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.72.4.3.2.1.1.1 |
mscFrAtmDlciSiwfSdComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.72.4.3.2.1.1.2 |
mscFrAtmDlciSiwfSdStorageTypeThis variable represents the storage type value for the
mscFrAtmDlciSiwfSd tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.72.4.3.2.1.1.4 |
mscFrAtmDlciSiwfSdIndexThis variable represents the index for the mscFrAtmDlciSiwfSd tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.72.4.3.2.1.1.10 |
mscFrAtmDlciSiwfSdProvTableThis group contains provisionable attributes for the parent Siwf
component. SEQUENCE OF MscFrAtmDlciSiwfSdProvEntry .1.3.6.1.4.1.562.36.2.1.72.4.3.2.10 |
mscFrAtmDlciSiwfSdProvEntryAn entry in the mscFrAtmDlciSiwfSdProvTable. MscFrAtmDlciSiwfSdProvEntry .1.3.6.1.4.1.562.36.2.1.72.4.3.2.10.1 |
mscFrAtmDlciSiwfSdModeThis attribute specifies the mode of interoperability between the
Frame Relay and ATM connections regarding upper layer protocol
encapsulations.
When translationMode is selected, the interworking function
performs translations between RFC 1490 and RFC 1483
encapsulated headers, including routed protocol translation, bridged
protocol translation, and connection oriented protocol translation
(except for RFC 1490 connection oriented protocol without RFC
1490 header, which is done in speTranslationMode).
A value of transparentMode indicates that the interworking
function forwards data without altering the upper layer user
protocol encapsulation. Transparent mode is selected when the
upper layer user protocol encapsulation methods are compatible
between terminal equipments.
A value of speTranslationMode indicates that the interworking
function performs single protocol translation between RFC 1490
with no header and RFC 1483 encapsulated packets.
The default value is sameAsInterface, which means as defined in
FrAtm/n Ca sdMode.rw Enumeration .1.3.6.1.4.1.562.36.2.1.72.4.3.2.10.1.1 |
mscFrAtmDlciSiwfSdDeToClpMappingThis attribute specifies the DE to CLP mapping that is performed in
the Frame Relay to ATM direction.
When preserve is selected, the DE field in the Q.922 core frame is
mapped to the ATM CLP field of every cell generated by the
segmentation process of the AAL5 PDU containing the information
of that frame.
When always0 is selected, the CLP field of every ATM cell
generated by the segmentation process of the AAL5 PDU
containing the information of that frame is always set to 0.
When always1 is selected, the CLP field of every ATM cell
generated by the segmentation process of the AAL5 PDU
containing the information of that frame is always set to 1.rw Enumeration .1.3.6.1.4.1.562.36.2.1.72.4.3.2.10.1.2 |
mscFrAtmDlciSiwfSdClpToDeMappingThis attribute specifies the type of CLP to DE mapping that is
performed in the ATM to Frame Relay to direction.
When preserve is selected, the DE field of the Q.922 Core frame is
set when one or more ATM cells belonging to an AAL5 frame have
their CLP field set.
When always0 is selected, the DE field of the Q.922 Core frame is
always set to 0.
When always1 is selected, the DE field of the Q.922 Core frame is
always set to 1.rw Enumeration .1.3.6.1.4.1.562.36.2.1.72.4.3.2.10.1.3 |
mscFrAtmDlciSiwfSdFecnToEfciMappingThis attribute specifies the type of FECN to EFCI mapping that is
performed in the Frame Relay to ATM direction.
When preserve is selected, the FECN field in the Q.922 Core frame
is mapped directly to the ATM EFCI field of every cell generated by
the AAL5 segmentation process.
When always0 is selected, the EFCI field in every ATM cell
generated is set to 0.rw Enumeration .1.3.6.1.4.1.562.36.2.1.72.4.3.2.10.1.4 |
mscFrAtmDlciSiwfSdCrToUuMappingThis attribute indicates the type of CR to UU mapping that is
performed in the Frame Relay to ATM direction.
A value of preserve indicates that the CR field in the Q.922 Core
frame is mapped directly to the ATM UU field of every cell
generated by the AAL5 segmentation process.
A value of always0 indicates that the UU field in every ATM cell
generated is set to 0.rwobsolete Enumeration .1.3.6.1.4.1.562.36.2.1.72.4.3.2.10.1.5 |
mscFrAtmDlciSiwfNPvc OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.72.4.3.3 |
mscFrAtmDlciSiwfNPvcRowStatusTableThis entry controls the addition and deletion of
mscFrAtmDlciSiwfNPvc components. SEQUENCE OF MscFrAtmDlciSiwfNPvcRowStatusEntry .1.3.6.1.4.1.562.36.2.1.72.4.3.3.1 |
mscFrAtmDlciSiwfNPvcRowStatusEntryA single entry in the table represents a single
mscFrAtmDlciSiwfNPvc component. MscFrAtmDlciSiwfNPvcRowStatusEntry .1.3.6.1.4.1.562.36.2.1.72.4.3.3.1.1 |
mscFrAtmDlciSiwfNPvcRowStatusThis variable is used as the basis for SNMP naming of
mscFrAtmDlciSiwfNPvc components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.72.4.3.3.1.1.1 |
mscFrAtmDlciSiwfNPvcComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.72.4.3.3.1.1.2 |
mscFrAtmDlciSiwfNPvcStorageTypeThis variable represents the storage type value for the
mscFrAtmDlciSiwfNPvc tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.72.4.3.3.1.1.4 |
mscFrAtmDlciSiwfNPvcIndexThis variable represents the index for the mscFrAtmDlciSiwfNPvc tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.72.4.3.3.1.1.10 |
mscFrAtmDlciSiwfNPvcProvTableThis group contains provisionable attributes for the NPvc
component. SEQUENCE OF MscFrAtmDlciSiwfNPvcProvEntry .1.3.6.1.4.1.562.36.2.1.72.4.3.3.10 |
mscFrAtmDlciSiwfNPvcProvEntryAn entry in the mscFrAtmDlciSiwfNPvcProvTable. MscFrAtmDlciSiwfNPvcProvEntry .1.3.6.1.4.1.562.36.2.1.72.4.3.3.10.1 |
mscFrAtmDlciSiwfNPvcAtmConnectionThis attribute specifies the ATM connection to which the
interworking function is linked.
The ATM connection must be linked to an ATM end-point. For
example AtmIf/m Vcc/m Nep.rw Link .1.3.6.1.4.1.562.36.2.1.72.4.3.3.10.1.1 |
mscFrAtmDlciSiwfNPvcCorrelationTagThis attribute specifies a unique string, set by the operator, which
identifies the call for accounting purposes. Downstream processing
uses this attribute to correlate accounting records issued at different
nodes in the network. Normally, this value is provisioned with the
same value at each end of the connection. If the value of
accountingEnabled is no, this attribute has no effect. This attribute
is also visible in the FrAtm Dlci component when accounting is
enabled.rw HexString .1.3.6.1.4.1.562.36.2.1.72.4.3.3.10.1.3 |
mscFrAtmDlciSiwfNPvcSiwfNpvcOpTableThis group contains the operational attributes for the FrAtm Dlci
Siwf Npvc connection. SEQUENCE OF MscFrAtmDlciSiwfNPvcSiwfNpvcOpEntry .1.3.6.1.4.1.562.36.2.1.72.4.3.3.11 |
mscFrAtmDlciSiwfNPvcSiwfNpvcOpEntryAn entry in the mscFrAtmDlciSiwfNPvcSiwfNpvcOpTable. MscFrAtmDlciSiwfNPvcSiwfNpvcOpEntry .1.3.6.1.4.1.562.36.2.1.72.4.3.3.11.1 |
mscFrAtmDlciSiwfNPvcConnectionToAtmThis attribute indicates the ATM connection to which the
interworking function is linked.ro RowPointer .1.3.6.1.4.1.562.36.2.1.72.4.3.3.11.1.1 |
mscFrAtmDlciSiwfSPvc OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.72.4.3.4 |
mscFrAtmDlciSiwfSPvcRowStatusTableThis entry controls the addition and deletion of
mscFrAtmDlciSiwfSPvc components. SEQUENCE OF MscFrAtmDlciSiwfSPvcRowStatusEntry .1.3.6.1.4.1.562.36.2.1.72.4.3.4.1 |
mscFrAtmDlciSiwfSPvcRowStatusEntryA single entry in the table represents a single
mscFrAtmDlciSiwfSPvc component. MscFrAtmDlciSiwfSPvcRowStatusEntry .1.3.6.1.4.1.562.36.2.1.72.4.3.4.1.1 |
mscFrAtmDlciSiwfSPvcRowStatusThis variable is used as the basis for SNMP naming of
mscFrAtmDlciSiwfSPvc components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.72.4.3.4.1.1.1 |
mscFrAtmDlciSiwfSPvcComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.72.4.3.4.1.1.2 |
mscFrAtmDlciSiwfSPvcStorageTypeThis variable represents the storage type value for the
mscFrAtmDlciSiwfSPvc tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.72.4.3.4.1.1.4 |
mscFrAtmDlciSiwfSPvcIndexThis variable represents the index for the mscFrAtmDlciSiwfSPvc tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.72.4.3.4.1.1.10 |
mscFrAtmDlciSiwfSPvcProvTableThis group contains provisionable attributes for the soft PVC
component. SEQUENCE OF MscFrAtmDlciSiwfSPvcProvEntry .1.3.6.1.4.1.562.36.2.1.72.4.3.4.10 |
mscFrAtmDlciSiwfSPvcProvEntryAn entry in the mscFrAtmDlciSiwfSPvcProvTable. MscFrAtmDlciSiwfSPvcProvEntry .1.3.6.1.4.1.562.36.2.1.72.4.3.4.10.1 |
mscFrAtmDlciSiwfSPvcRemoteAddressThis attribute specifies the remote address of the SPVC.
It is represented as a prefix NPI string and a sequence of up to 15
digits to specify either a native (E.164 or X.121) address format or
Atm End System Address(AESA) in ISO NSAP format.
For example:
native E.164 = 'e.upto15digits'
native X.121 = 'x.upto14digits'
NSAP address = '40 hexadecimal digits'rw AsciiString .1.3.6.1.4.1.562.36.2.1.72.4.3.4.10.1.2 |
mscFrAtmDlciSiwfSPvcRemoteConnectionIdentifierThis attribute specifies the remote connection identifier. The
identifier is either a remote Atm Vpi.Vci logical channel number
assignment or a remote Frame Relay Dlci logical channel number
assignment. The remote Atm Vpi.Vci logical channel number is
input as 'Vpi.Vci' and the remote Frame Relay Dlci logical channel
number is input as '0.remoteDlci'.rw IntegerSequence .1.3.6.1.4.1.562.36.2.1.72.4.3.4.10.1.3 |
mscFrAtmDlciSiwfSPvcCorrelationTagThis attribute specifies the unique string, set by the operator, which
identifies the call for accounting purposes. Downstream processing
uses this attribute to correlate accounting records issued at different
nodes in the network. If the value of accountingEnabled is no, this
attribute has no effect. This attribute is also visible in the FrAtm
Dlci component when accounting is enabled. When this attribute is
an empty string, the operational correlationTag attribute in the
FrAtm Dlci component receives the value of a system-generated
correlationTag.rw HexString .1.3.6.1.4.1.562.36.2.1.72.4.3.4.10.1.4 |
mscFrAtmDlciSiwfQoS OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.72.4.3.5 |
mscFrAtmDlciSiwfQoSRowStatusTableThis entry controls the addition and deletion of
mscFrAtmDlciSiwfQoS components. SEQUENCE OF MscFrAtmDlciSiwfQoSRowStatusEntry .1.3.6.1.4.1.562.36.2.1.72.4.3.5.1 |
mscFrAtmDlciSiwfQoSRowStatusEntryA single entry in the table represents a single
mscFrAtmDlciSiwfQoS component. MscFrAtmDlciSiwfQoSRowStatusEntry .1.3.6.1.4.1.562.36.2.1.72.4.3.5.1.1 |
mscFrAtmDlciSiwfQoSRowStatusThis variable is used as the basis for SNMP naming of
mscFrAtmDlciSiwfQoS components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.72.4.3.5.1.1.1 |
mscFrAtmDlciSiwfQoSComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.72.4.3.5.1.1.2 |
mscFrAtmDlciSiwfQoSStorageTypeThis variable represents the storage type value for the
mscFrAtmDlciSiwfQoS tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.72.4.3.5.1.1.4 |
mscFrAtmDlciSiwfQoSIndexThis variable represents the index for the mscFrAtmDlciSiwfQoS tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.72.4.3.5.1.1.10 |
mscFrAtmDlciSiwfQoSProvTableThis group contains the provisionable quality of service attributes
for the Qos component. SEQUENCE OF MscFrAtmDlciSiwfQoSProvEntry .1.3.6.1.4.1.562.36.2.1.72.4.3.5.10 |
mscFrAtmDlciSiwfQoSProvEntryAn entry in the mscFrAtmDlciSiwfQoSProvTable. MscFrAtmDlciSiwfQoSProvEntry .1.3.6.1.4.1.562.36.2.1.72.4.3.5.10.1 |
mscFrAtmDlciSiwfQoSEmissionPriorityToIfThis attribute specifies the emission priority of frames sent to the
FrAtm interface. Frames in a higher priority queue, represented by a
numerically higher number, will be sent before frames in a lower
priority queue.
The value of this attribute is interpreted according to the value of
the provisionable attribute numberOfEmissionQs under the parent
FrAtm component. If the numberOfEmissionQs attribute is set to 2,
emissionPriorityToIf value of 0 maps to emission priority queue 0
representing a lower priority queue, and emissionPriorityToIf values
of 1, 2, and 3 are mapped to emission priority queue 1 representing
the highest priority queue. If the numberOfEmissionQs is set to 4,
the emissionPriorityToIf values are directly assigned to the
emission priority queues.
A value of deriveFromTp specifies that the emission priority is to
be extracted from the Mod Frs AtmNet Tpm/n component using the
transferPriority attribute.
A value of sameAsInterface specifies that the emission priority is to
be extracted from the FrAtm Ca component using the
niwfEmissionPriorityToIf attribute.rw Enumeration .1.3.6.1.4.1.562.36.2.1.72.4.3.5.10.1.1 |
mscFrAtmDlciSiwfQoSTransferPriorityThis attribute specifies the transfer priority of frames sent to the
ATM connection using this particular Dlci.
In the Frame Relay to ATM direction, the tp selects the ATM
service category of the connection.
In the ATM to Frame Relay direction, the tp selects the FrAtm
emission priority queue.
A value of sameAsInterface specifies that the emission priority
extracts from the FrAtm Ca component using the
siwfTransferPriority attribute.
DESCRIPTIONrw Enumeration .1.3.6.1.4.1.562.36.2.1.72.4.3.5.10.1.2 |
mscFrAtmDlciSiwfAtmCon OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.72.4.3.6 |
mscFrAtmDlciSiwfAtmConRowStatusTableThis entry controls the addition and deletion of
mscFrAtmDlciSiwfAtmCon components. SEQUENCE OF MscFrAtmDlciSiwfAtmConRowStatusEntry .1.3.6.1.4.1.562.36.2.1.72.4.3.6.1 |
mscFrAtmDlciSiwfAtmConRowStatusEntryA single entry in the table represents a single
mscFrAtmDlciSiwfAtmCon component. MscFrAtmDlciSiwfAtmConRowStatusEntry .1.3.6.1.4.1.562.36.2.1.72.4.3.6.1.1 |
mscFrAtmDlciSiwfAtmConRowStatusThis variable is used as the basis for SNMP naming of
mscFrAtmDlciSiwfAtmCon components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.72.4.3.6.1.1.1 |
mscFrAtmDlciSiwfAtmConComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.72.4.3.6.1.1.2 |
mscFrAtmDlciSiwfAtmConStorageTypeThis variable represents the storage type value for the
mscFrAtmDlciSiwfAtmCon tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.72.4.3.6.1.1.4 |
mscFrAtmDlciSiwfAtmConIndexThis variable represents the index for the mscFrAtmDlciSiwfAtmCon tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.72.4.3.6.1.1.10 |
mscFrAtmDlciSiwfAtmConOperTableThis attribute group contains the operational attributes for the
NapAtmConnection component. SEQUENCE OF MscFrAtmDlciSiwfAtmConOperEntry .1.3.6.1.4.1.562.36.2.1.72.4.3.6.10 |
mscFrAtmDlciSiwfAtmConOperEntryAn entry in the mscFrAtmDlciSiwfAtmConOperTable. MscFrAtmDlciSiwfAtmConOperEntry .1.3.6.1.4.1.562.36.2.1.72.4.3.6.10.1 |
mscFrAtmDlciSiwfAtmConNextHopThis attribute shows the component name of the AtmIf Vcc Ep or
AtmCon component to which this switched connection is
established.ro RowPointer .1.3.6.1.4.1.562.36.2.1.72.4.3.6.10.1.1 |
mscFrAtmDlciSiwfConnOpTableThis group contains operational attributes for the ATM connection. SEQUENCE OF MscFrAtmDlciSiwfConnOpEntry .1.3.6.1.4.1.562.36.2.1.72.4.3.11 |
mscFrAtmDlciSiwfConnOpEntryAn entry in the mscFrAtmDlciSiwfConnOpTable. MscFrAtmDlciSiwfConnOpEntry .1.3.6.1.4.1.562.36.2.1.72.4.3.11.1 |
mscFrAtmDlciSiwfDiscardPriorityThis attribute indicates the discard priority of frames sent to and
received from the ATM connection.
When discardPriority is dp3 the frames belonging to this
connection will be discarded first when the FrAtm/n Dlci/n Siwf and
the ATM End-Point experience congestion.
When discardPriority is dp2 the frames belonging to this
connection will be discarded after all the dp3 priority frames are
discarded when the FrAtm/n Dlci/n Siwf and the ATM End-Point
experience congestion.
When discardPriority is dp1 the frames belonging to this
connection will be discarded after all the dp2 and dp3 priority
frames are discarded when the FrAtm/n Dlci/n Siwf and the ATM
End-Point experience congestion.ro Enumeration .1.3.6.1.4.1.562.36.2.1.72.4.3.11.1.2 |
mscFrAtmDlciSiwfAtmServiceCategoryThis attribute indicates the ATM service category that is used for
this connection. This attribute is only displayed for SPVCs.ro Enumeration .1.3.6.1.4.1.562.36.2.1.72.4.3.11.1.4 |
mscFrAtmDlciSiwfTrafficParmConvPolicyThis attribute indicates the traffic parameter conversion policy that
is being used for this connection.
For Npvcs, this attribute is not displayed.
Policy 3 characterizes the traffic in the following way:
- ATM traffic descriptor type 6 is selected
- ATM service category rtVbr and nrtVbr supported only
- PCR0+1 is based on AR
- SCR0+1 is based on CIR and EIR
- MBS0+1 is based on Bc, Be, CIR, EIR and AR
- Takes into account that the instantaneous rate of the frame relay
stream can be above CIR and up to the AR.
Policy 4 characterizes the traffic in the following way:
- ATM traffic descriptor type 7 or 8 is selected. Type 7 is chosen
when non-conforming cells are to be discarded and type 8 when
non-conforming cells are tagged by UPC traffic policer.
- PCR0+1 is based on AR
- SCR0 is based on CIR
- MBS0 is based on Bc, CIR, and AR
- There is no direct characterization of EIR. The allowed EIR can be
derived using the difference between the AR and CIR.
Policy 5 characterizes the traffic in the following way:
- ATM traffic descriptor type 7 or 8 is selected. Type 7 is chosen
when non-conforming cells are to be discarded and type 8 when
non-conforming cells are tagged by UPC traffic policer
- ATM service category rtVbr and nrtVbr supported only
- PCR0+1 is based on CIR and EIR
- SCR0 is based on the CIR
- MBS0 is based on the CIR
- The maximum PCR is no longer based on the AR but rather on the
CIR and EIR or CIR.
Policy 6 characterizes the traffic in the following way:
- ATM traffic descriptor type 3 is selected
- ATM service category ubr, cbr, rtVbr and nrtVbr supported only
- PCR0+1 is based only on CIR.
DESCRIPTIONro Enumeration .1.3.6.1.4.1.562.36.2.1.72.4.3.11.1.5 |
mscFrAtmDlciSiwfAvgFrameSizeThis attribute indicates the average frame size that is used for this
connection as part of the traffic parameter conversion policy.
Average frame size is not applicable for Npvcs, and therefore it is
not displayed.ro INTEGER .1.3.6.1.4.1.562.36.2.1.72.4.3.11.1.6 |
mscFrAtmDlciSiwfRemoteAddressThis attribute indicates the remote address (native E.164, native
X.121 or NSAP) for this connection. This attribute is only displayed
for SPVCs.ro AsciiString .1.3.6.1.4.1.562.36.2.1.72.4.3.11.1.8 |
mscFrAtmDlciSiwfRemoteConnectionIdentifierThis attribute indicates the remote connection identifier. This
identifier is either a remote Atm Vpi.Vci logical channel number or a
remote Frame Relay Dlci logical channel number. The remote Atm
Vpi.Vci logical channel number is displayed as 'Vpi.Vci'. and the
remote Frame Relay Dlci logical channel number is displayed as
'0.remoteDlci'.
For NPVCs, this attribute is not displayed.ro IntegerSequence .1.3.6.1.4.1.562.36.2.1.72.4.3.11.1.9 |
mscFrAtmDlciSiwfSdOpTableThis group contains operational information for a Siwf component. SEQUENCE OF MscFrAtmDlciSiwfSdOpEntry .1.3.6.1.4.1.562.36.2.1.72.4.3.12 |
mscFrAtmDlciSiwfSdOpEntryAn entry in the mscFrAtmDlciSiwfSdOpTable. MscFrAtmDlciSiwfSdOpEntry .1.3.6.1.4.1.562.36.2.1.72.4.3.12.1 |
mscFrAtmDlciSiwfModeThis attribute indicates the mode of interoperability between the
Frame Relay and ATM connections regarding upper layer protocol
encapsulations.
A value of translationMode indicates that the interworking function
performs translation between RFC 1490 and RFC 1483
encapsulated headers, including routed protocol translation, bridged
protocol translation, and connection oriented protocol translation
(except for RFC 1490 connection oriented protocol without RFC
1490 header, which is done in speTranslationMode).
A value of transparentMode indicates that the interworking
function forwards data without altering the upper layer user
protocol encapsulation. Transparent mode is selected when the
upper layer user protocol encapsulation methods are compatible
between terminal equipments.
A value of speTranslationMode indicates that the interworking
function performs single protocol translation between RFC 1490
with no header and RFC 1483 encapsulated packets.ro Enumeration .1.3.6.1.4.1.562.36.2.1.72.4.3.12.1.1 |
mscFrAtmDlciSiwfDeToClpMappingThis attribute indicates the type of DE to CLP mapping that is
performed in the Frame Relay to ATM direction.
A value of preserve indicates that the DE field in a Q.922 core
frame is copied to the ATM CLP field of every cell containing the
information of that frame.
A value of always0 indicates that the CLP field of every generated
ATM cell is always 0.
A value of always1 indicates that the CLP field of every generated
ATM cell is always1.ro Enumeration .1.3.6.1.4.1.562.36.2.1.72.4.3.12.1.2 |
mscFrAtmDlciSiwfClpToDeMappingThis attribute indicates the type of CLP to DE mapping that is
performed in the ATM to Frame Relay direction.
A value of preserve indicates that the DE field of the Q.922 Core
frame is set when one or more ATM cells belonging to an AAL5
frame have their CLP field set.
A value of always0 indicates that the DE field of the Q.922 Core
frame is always set to 0.
A value of always1 indicates that the DE field of the Q.922 Core
frame is always set to 1.ro Enumeration .1.3.6.1.4.1.562.36.2.1.72.4.3.12.1.3 |
mscFrAtmDlciSiwfFecnToEfciMappingThis attribute indicates the type of FECN to EFCI mapping that is
performed in the Frame Relay to ATM direction.
A value of preserve indicates that the FECN field in a Q.922 Core
frame is copied directly to the ATM EFCI field of every cell.
A value of always0 indicates that the EFCI field in every ATM cell
generated is set to 0.ro Enumeration .1.3.6.1.4.1.562.36.2.1.72.4.3.12.1.4 |
mscFrAtmDlciSiwfCrToUuMappingThis attribute indicates the type of CR to UU mapping that is
performed in the Frame Relay to ATM direction.
A value of preserve indicates that the CR field in the Q.922 Core
frame is mapped directly to the ATM UU field of every cell
generated by the AAL5 segmentation process.
A value of always0 indicates that the UU field in every ATM cell
generated is set to 0.roobsolete Enumeration .1.3.6.1.4.1.562.36.2.1.72.4.3.12.1.5 |
mscFrAtmDlciSiwfTransferPriorityThis attribute indicates the transfer priority used to establish the
connection.
For Npvcs, the value is notApplicable.ro Enumeration .1.3.6.1.4.1.562.36.2.1.72.4.3.12.1.6 |
mscFrAtmDlciSiwfAssignedBandwidthPoolThis attribute specifies the bandwidth pool that this Dlci uses.ro Enumeration .1.3.6.1.4.1.562.36.2.1.72.4.3.12.1.7 |
mscFrAtmDlciSiwfSiwfSpvcOpTableThis group contains operational attributes for the FrAtm Dlci Siwf
Spvc connection. SEQUENCE OF MscFrAtmDlciSiwfSiwfSpvcOpEntry .1.3.6.1.4.1.562.36.2.1.72.4.3.13 |
mscFrAtmDlciSiwfSiwfSpvcOpEntryAn entry in the mscFrAtmDlciSiwfSiwfSpvcOpTable. MscFrAtmDlciSiwfSiwfSpvcOpEntry .1.3.6.1.4.1.562.36.2.1.72.4.3.13.1 |
mscFrAtmDlciSiwfPeakCellRate0This attribute indicates the Peak Cell Rate (PCR) of the ATM VCC
to which this interworking function is linked for all cells (with
CLP=0 and CLP=1).
The pcr0 is derived from the remote end traffic parameters using the
conversion policy of the transferPriorityMapping.
For NPVCs, this attribute is not displayed.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.72.4.3.13.1.1 |
mscFrAtmDlciSiwfPeakCellRate01This attribute indicates the Peak Cell Rate (PCR) of the ATM VCC
to which this interworking function is linked for all cells (with
CLP=0 and CLP=1).
The pcr01 is derived from the remote end traffic parameters using
the conversion policy of the transferPriorityMapping.
For NPVCs, this attribute is not displayed.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.72.4.3.13.1.2 |
mscFrAtmDlciSiwfSustainedCellRate0This attribute indicates the Sustained Cell Rate (SCR) of the ATM
VCC to which this interworking function is linked for high priority
cells (with CLP=0).
The scr0 is derived from the remote end traffic parameters using the
conversion policy of the transferPriorityMapping.
For NPVCs, this attribute is not displayed.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.72.4.3.13.1.3 |
mscFrAtmDlciSiwfSustainedCellRate01This attribute indicates the Sustained Cell Rate (SCR) of the ATM
VCC that to which this interworking function is linked for all cells
(with CLP=0 and CLP=1).
The scr01 is derived from the remote end traffic parameters using
the conversion policy of the transferPriorityMapping.
For NPVCs, this attribute is not displayed.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.72.4.3.13.1.4 |
mscFrAtmDlciSiwfMaximumBurstSize0This attribute indicates the Maximum Burst Size (MBS) of the
ATM VCC to which this interworking function is linked for high
priority cells (with CLP=0).
The mbs0 is derived from the remote end traffic parameters using
the conversion policy of the transferPriorityMapping.
For NPVCs, this attribute is not displayed.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.72.4.3.13.1.5 |
mscFrAtmDlciSiwfMaximumBurstSize01This attribute indicates the Maximum Burst Size (MBS) of the
ATM VCC to which this interworking function is linked for all cells
(with CLP=0 and CLP=1).
The mbs01 is derived from the remote end traffic parameters using
the conversion policy of the transferPriorityMapping.
For NPVCs, this attribute is not displayed.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.72.4.3.13.1.6 |
mscFrAtmDlciSiwfEquivalentBitRateThis attribute indicates the access reserved bandwidth for this FR-
ATM connection when CAC is on. If a connection is subcribed to
CIR only or CIR plus EIR service, the EBR reserved is CIR. If a
connection is subcribed to EIR only service, the EBR reserved is 0.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.72.4.3.13.1.7 |
mscFrAtmDlciSiwfTypeThis attribute indicates if the component provisioned is a calling or
called end. If the value is master, the Dlci Siwf Spvc component is
provisioned as a calling end and is responsible for originating the
call to set up the ATM VCC. If the value is slave, this Dlci Siwf
component is provisioned as a called end and is responsible for
terminating call setup requests from the remote end. This attribute is
not displayed for NPVCs.ro Enumeration .1.3.6.1.4.1.562.36.2.1.72.4.3.13.1.9 |
mscFrAtmDlciSiwfVccClearCauseThis attribute indicates the last received clear cause message from
the network. This attribute is not displayed for NPVCs.
Please refer to ATM User-Network Interface Specification for
possible clear causes.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.72.4.3.13.1.10 |
mscFrAtmDlciSiwfVccCauseDiagThis attribute indicates the diagnostic value of the last release
message received from the network. This attribute is not displayed
for NPVCs.
Please refer to ATM User-Network Interface Specification for
possible diagnostic values.ro HexString .1.3.6.1.4.1.562.36.2.1.72.4.3.13.1.15 |
mscFrAtmDlciSiwfStatsTableThis group contains statistics for the Siwf component. SEQUENCE OF MscFrAtmDlciSiwfStatsEntry .1.3.6.1.4.1.562.36.2.1.72.4.3.14 |
mscFrAtmDlciSiwfStatsEntryAn entry in the mscFrAtmDlciSiwfStatsTable. MscFrAtmDlciSiwfStatsEntry .1.3.6.1.4.1.562.36.2.1.72.4.3.14.1 |
mscFrAtmDlciSiwfUnknown1490FramesThis attribute counts the number of frames received from the
interface that have a frame header that is not recognized by the RFC
1490.
When the maximum count is reached, it wraps to zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.72.4.3.14.1.1 |
mscFrAtmDlciSiwfInvalid1490FramesThis attribute counts the number of frames received from the
interface that have an invalid frame header. An invalid frame header
occurs when the frame has less than the expected number of bytes.
When the maximum count is reached, the count wraps to zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.72.4.3.14.1.2 |
mscFrAtmDlciSiwfLastUnknown1490ProtocolHeaderThis attribute contains the most recent unrecognized protocol
header that was received from the interface.
All the RFC 1490 protocols described in sections 5.3.1.1 through
5.3.1.3 of FRF.8 are supported, except ARP is not supported.ro HexString .1.3.6.1.4.1.562.36.2.1.72.4.3.14.1.3 |
mscFrAtmDlciSiwfUnknown1483FramesThis attribute counts the number of frames received from the ATM
connection that have a frame header that is not recognized by the
RFC 1483.
When the maximum count is reached, it wraps to zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.72.4.3.14.1.4 |
mscFrAtmDlciSiwfInvalid1483FramesThis attribute counts the number of frames received from the ATM
connection that have an invalid frame header. An invalid frame
header occurs when the frame has less than the expected number of
bytes.
When the maximum count is reached, it wraps to zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.72.4.3.14.1.5 |
mscFrAtmDlciSiwfLastUnknown1483ProtocolHeaderThis attribute identifies the most recent unrecognized protocol
header that was received from the ATM connection.
All the RFC 1483 protocols described in sections 5.3.1.1 through
5.3.1.3 of FRF.8 are supported except ARP.ro HexString .1.3.6.1.4.1.562.36.2.1.72.4.3.14.1.6 |
mscFrAtmDlciNiwf OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.72.4.4 |
mscFrAtmDlciNiwfRowStatusTableThis entry controls the addition and deletion of
mscFrAtmDlciNiwf components. SEQUENCE OF MscFrAtmDlciNiwfRowStatusEntry .1.3.6.1.4.1.562.36.2.1.72.4.4.1 |
mscFrAtmDlciNiwfRowStatusEntryA single entry in the table represents a single
mscFrAtmDlciNiwf component. MscFrAtmDlciNiwfRowStatusEntry .1.3.6.1.4.1.562.36.2.1.72.4.4.1.1 |
mscFrAtmDlciNiwfRowStatusThis variable is used as the basis for SNMP naming of
mscFrAtmDlciNiwf components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.72.4.4.1.1.1 |
mscFrAtmDlciNiwfComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.72.4.4.1.1.2 |
mscFrAtmDlciNiwfStorageTypeThis variable represents the storage type value for the
mscFrAtmDlciNiwf tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.72.4.4.1.1.4 |
mscFrAtmDlciNiwfIndexThis variable represents the index for the mscFrAtmDlciNiwf tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.72.4.4.1.1.10 |
mscFrAtmDlciNiwfSpvc OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.72.4.4.2 |
mscFrAtmDlciNiwfSpvcRowStatusTableThis entry controls the addition and deletion of
mscFrAtmDlciNiwfSpvc components. SEQUENCE OF MscFrAtmDlciNiwfSpvcRowStatusEntry .1.3.6.1.4.1.562.36.2.1.72.4.4.2.1 |
mscFrAtmDlciNiwfSpvcRowStatusEntryA single entry in the table represents a single
mscFrAtmDlciNiwfSpvc component. MscFrAtmDlciNiwfSpvcRowStatusEntry .1.3.6.1.4.1.562.36.2.1.72.4.4.2.1.1 |
mscFrAtmDlciNiwfSpvcRowStatusThis variable is used as the basis for SNMP naming of
mscFrAtmDlciNiwfSpvc components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.72.4.4.2.1.1.1 |
mscFrAtmDlciNiwfSpvcComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.72.4.4.2.1.1.2 |
mscFrAtmDlciNiwfSpvcStorageTypeThis variable represents the storage type value for the
mscFrAtmDlciNiwfSpvc tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.72.4.4.2.1.1.4 |
mscFrAtmDlciNiwfSpvcIndexThis variable represents the index for the mscFrAtmDlciNiwfSpvc tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.72.4.4.2.1.1.10 |
mscFrAtmDlciNiwfSpvcProvTableThis group contains the provisionable attributes for the soft PVC
component. SEQUENCE OF MscFrAtmDlciNiwfSpvcProvEntry .1.3.6.1.4.1.562.36.2.1.72.4.4.2.10 |
mscFrAtmDlciNiwfSpvcProvEntryAn entry in the mscFrAtmDlciNiwfSpvcProvTable. MscFrAtmDlciNiwfSpvcProvEntry .1.3.6.1.4.1.562.36.2.1.72.4.4.2.10.1 |
mscFrAtmDlciNiwfSpvcRemoteAddressThis attribute specifies the remote address of the SPVC.
It is represented as a prefix NPI string and a sequence of up to 15
digits to specify either a native E.164 or native X.121 address
format. For example, native E.164 = 'e.upto15digits'.rw AsciiString .1.3.6.1.4.1.562.36.2.1.72.4.4.2.10.1.1 |
mscFrAtmDlciNiwfSpvcRemoteDlciThis attribute specifies the remote connection identifier. This
identifier is the DLCI logical channel number assignment used
inside the ATM pipe.rw INTEGER (16..1007 | 1022) .1.3.6.1.4.1.562.36.2.1.72.4.4.2.10.1.2 |
mscFrAtmDlciNiwfSpvcCorrelationTagThis attribute specifies aunique string, set by the operator, which
identifies the call for accounting purposes. Downstream processing
uses this attribute to correlate accounting records issued at different
nodes in the network. Normally, the attribute is provisioned with the
same value at both ends of the connection. If the value of
accountingEnabled is no, this attribute has no effect. This attribute
is also visible in the FrAtm Dlci component when accounting is
enabled. When this attribute is an empty string, the operational
correlationTag attribute in the FrAtm Dlci component receives the
value of a system-generated correlationTag.rw HexString .1.3.6.1.4.1.562.36.2.1.72.4.4.2.10.1.3 |
mscFrAtmDlciNiwfNd OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.72.4.4.3 |
mscFrAtmDlciNiwfNdRowStatusTableThis entry controls the addition and deletion of
mscFrAtmDlciNiwfNd components. SEQUENCE OF MscFrAtmDlciNiwfNdRowStatusEntry .1.3.6.1.4.1.562.36.2.1.72.4.4.3.1 |
mscFrAtmDlciNiwfNdRowStatusEntryA single entry in the table represents a single
mscFrAtmDlciNiwfNd component. MscFrAtmDlciNiwfNdRowStatusEntry .1.3.6.1.4.1.562.36.2.1.72.4.4.3.1.1 |
mscFrAtmDlciNiwfNdRowStatusThis variable is used as the basis for SNMP naming of
mscFrAtmDlciNiwfNd components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.72.4.4.3.1.1.1 |
mscFrAtmDlciNiwfNdComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.72.4.4.3.1.1.2 |
mscFrAtmDlciNiwfNdStorageTypeThis variable represents the storage type value for the
mscFrAtmDlciNiwfNd tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.72.4.4.3.1.1.4 |
mscFrAtmDlciNiwfNdIndexThis variable represents the index for the mscFrAtmDlciNiwfNd tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.72.4.4.3.1.1.10 |
mscFrAtmDlciNiwfNdProvTableThis group contains provisionable attributes for the parent Niwf
component. SEQUENCE OF MscFrAtmDlciNiwfNdProvEntry .1.3.6.1.4.1.562.36.2.1.72.4.4.3.10 |
mscFrAtmDlciNiwfNdProvEntryAn entry in the mscFrAtmDlciNiwfNdProvTable. MscFrAtmDlciNiwfNdProvEntry .1.3.6.1.4.1.562.36.2.1.72.4.4.3.10.1 |
mscFrAtmDlciNiwfNdDeToClpMappingThis attribute specifies the type of DE to CLP mapping performs in
the Frame Relay to ATM direction.
When preserve is selected, the DE field in the Q.922 core frame
copies to the CLP field of every ATM cell containing the frame.
When always0 is selected, the CLP field of every ATM cell is
always set to 0.
When always1 is selected, the CLP field of every ATM cell is
always set to 1.rw Enumeration .1.3.6.1.4.1.562.36.2.1.72.4.4.3.10.1.1 |
mscFrAtmDlciNiwfNdClpToDeMappingThis attribute specifies the type of CLP to DE mapping performs in
the ATM to Frame Relay direction.
When preserve is selected, the DE field of the Q.922 core frame is
set when one or more ATM cells belonging the frame has its CLP
field set, or when the DE field of the FR-SSCS PDU is set.
When transparent is selected, the DE field of the Q.922 core frame
copies directly from the DE field of the FR-SSCS PDU.rw Enumeration .1.3.6.1.4.1.562.36.2.1.72.4.4.3.10.1.2 |
mscFrAtmDlciNiwfNdTransferPriorityThis attribute specifies the transfer priority of frames sent to and
received from the ATM connection.
In the Frame Relay to ATM direction, the tp selects the FRF.5 End
Point which multiplexes the frames.
In the ATM to Frame Relay direction, the tp is applied to frames on
a per-DLCI basis.
This attribute is obsoleted. During migration, its value will be
transfered to the QualityOfService transferPriority.rwobsolete Enumeration .1.3.6.1.4.1.562.36.2.1.72.4.4.3.10.1.3 |
mscFrAtmDlciNiwfQoS OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.72.4.4.4 |
mscFrAtmDlciNiwfQoSRowStatusTableThis entry controls the addition and deletion of
mscFrAtmDlciNiwfQoS components. SEQUENCE OF MscFrAtmDlciNiwfQoSRowStatusEntry .1.3.6.1.4.1.562.36.2.1.72.4.4.4.1 |
mscFrAtmDlciNiwfQoSRowStatusEntryA single entry in the table represents a single
mscFrAtmDlciNiwfQoS component. MscFrAtmDlciNiwfQoSRowStatusEntry .1.3.6.1.4.1.562.36.2.1.72.4.4.4.1.1 |
mscFrAtmDlciNiwfQoSRowStatusThis variable is used as the basis for SNMP naming of
mscFrAtmDlciNiwfQoS components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.72.4.4.4.1.1.1 |
mscFrAtmDlciNiwfQoSComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.72.4.4.4.1.1.2 |
mscFrAtmDlciNiwfQoSStorageTypeThis variable represents the storage type value for the
mscFrAtmDlciNiwfQoS tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.72.4.4.4.1.1.4 |
mscFrAtmDlciNiwfQoSIndexThis variable represents the index for the mscFrAtmDlciNiwfQoS tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.72.4.4.4.1.1.10 |
mscFrAtmDlciNiwfQoSProvTableThis group contains the provisionable quality of service attributes
for the Qos component. SEQUENCE OF MscFrAtmDlciNiwfQoSProvEntry .1.3.6.1.4.1.562.36.2.1.72.4.4.4.10 |
mscFrAtmDlciNiwfQoSProvEntryAn entry in the mscFrAtmDlciNiwfQoSProvTable. MscFrAtmDlciNiwfQoSProvEntry .1.3.6.1.4.1.562.36.2.1.72.4.4.4.10.1 |
mscFrAtmDlciNiwfQoSEmissionPriorityToIfThis attribute specifies the emission priority of frames sent to the
FrAtm interface. Frames in a higher priority queue, depicted by a
numerically higher number, are sent before frames in a lower
priority queue.
The value of this attribute is interpreted according to the value of
the provisionable attribute numberOfEmissionQs under the parent
FrAtm component. If the numberOfEmissionQs attribute is set to 2,
emissionPriorityToIf value of 0 maps to emission priority queue 0
representing a lower priority queue, and emissionPriorityToIf values
of 1, 2, and 3 map to emission priority queue 1 representing the
highest priority queue. If the numberOfEmissionQs is set to 4, the
emissionPriorityToIf values are directly assigned to the emission
priority queues.
A value of deriveFromTp specifies that the emission priority is to
be extracted from the Mod Frs AtmNet Tpm/n component using the
transferPriority attribute.
A value of sameAsInterface specifies that the emission priority is
extracts from the FrAtm Ca component using the
niwfEmissionPriorityToIf attribute.rw Enumeration .1.3.6.1.4.1.562.36.2.1.72.4.4.4.10.1.1 |
mscFrAtmDlciNiwfQoSTransferPriorityThis attribute specifies the transfer priority of frames sent to the
ATM connection.
In the Frame Relay to ATM direction, the tp selects the FRF.5 End
Point which multiplexes the frames.
In the ATM to Frame Relay direction, the tp selects the default
FrAtm emission priority queue to be used by this DLCI.
A value of sameAsInterface specifies that the emission priority is to
be extracted from the FrAtm Ca component using the
niwfTransferPriority attribute.
DESCRIPTIONrw Enumeration .1.3.6.1.4.1.562.36.2.1.72.4.4.4.10.1.2 |
mscFrAtmDlciNiwfOperTableThis group contains operational networking description information
for a Niwf component. SEQUENCE OF MscFrAtmDlciNiwfOperEntry .1.3.6.1.4.1.562.36.2.1.72.4.4.10 |
mscFrAtmDlciNiwfOperEntryAn entry in the mscFrAtmDlciNiwfOperTable. MscFrAtmDlciNiwfOperEntry .1.3.6.1.4.1.562.36.2.1.72.4.4.10.1 |
mscFrAtmDlciNiwfDeToClpMappingThis attribute indicates the type of DE to CLP mapping that is
performed in the Frame Relay to ATM direction.
A value of preserve indicates that the DE field in the Q.922 core
frame copies to the CLP field of every ATM cell containing the
frame.
A value of always0 indicates that the CLP field of every ATM cell is
always set to 0.
A value of always1 indicates that the CLP field of every ATM cell is
always set to 1.ro Enumeration .1.3.6.1.4.1.562.36.2.1.72.4.4.10.1.1 |
mscFrAtmDlciNiwfClpToDeMappingThis attribute indicates the type of CLP to DE mapping that is
performed in the ATM to Frame Relay direction.
A value of preserve indicates that the DE field of the Q.922 core
frame is set when one or more ATM cells belonging to the frame
has its CLP field set, or when the DE field of the FR-SSCS PDU is
set.
A value of transparent indicates that the DE field of the Q.922 core
frame copies directly from the DE field of the FR-SSCS PDU.ro Enumeration .1.3.6.1.4.1.562.36.2.1.72.4.4.10.1.2 |
mscFrAtmDlciNiwfTransferPriorityThis attribute indicates the transfer priority in use for a specific
connection. This is the transfer priority that the local Frame Relay
network uses for this connection to an ATM network.
In the Frame Relay to ATM direction, the tp selects the FRF.5 End
Point which multiplexes the frames.
In the ATM to Frame Relay direction, the tp selects the default
FrAtm emission priority queue to be used by this Dlci.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.72.4.4.10.1.3 |
mscFrAtmDlciNiwfAtmServiceCategoryThis attribute indicates the ATM service category that was mapped
for this connection.
A value of scNotAvailable indicates that atmServiceCategory is not
yet available for this connection.ro Enumeration .1.3.6.1.4.1.562.36.2.1.72.4.4.10.1.4 |
mscFrAtmDlciNiwfTrafficParmConvPolicyThis attribute indicates the traffic parameter conversion policy that
is used for this connection.
Policy 3 characterizes the traffic in the following way:
- ATM traffic descriptor type 6 is selected.
- PCR(0+1) is based on the ATM link rate.
- SCR(0+1) is based on the CIR and EIR.
- MB(0+1) is based on Bc, Be, CIR, EIR and AR.
- Takes into account that the instantaneous rate of the frame relay
stream can be above CIR and up to the AR.
Policy 4 characterizes the traffic in the following way:
- ATM traffic descriptor type 7 or 8 is selected. Type 7 is chosen
when non-conforming cells are to be discarded and type 8 when
non-conforming cells are tagged by UPC traffic policer.
- PCR(0+1) is based on AR.
- SCR(0) is based on the CIR.
- MBS(0) is based on Bc, CIR, and AR.
- There is no direct characterization of EIR. The allowed EIR can be
derived using the difference between the AR and CIR.
Policy 5 characterizes the traffic in the following way:
- ATM traffic descriptor type 7 or 8 is selected. Type 7 is chosen
when non-conforming cells are to be discarded and type 8 when
non-conforming cells are tagged by UPC traffic policer.
- PCR(0+1) is based on the CIR and EIR.
- SCR(0) is based on the CIR.
- MBS(0) is based on the CIR.
- The maximum PCR is no longer based on the AR but rather on the
CIR and EIR.
Policy 6 characterizes the traffic in the following way:
- ATM traffic descriptor type 3 is selected.
- PCR(0+1) is based only on the CIR
policyNotAvailable indicates that the trafficParmConvPolicy is not
yet available for this connection.ro Enumeration .1.3.6.1.4.1.562.36.2.1.72.4.4.10.1.5 |
mscFrAtmDlciNiwfAvgFrameSizeThis attribute indicates the average frame size that was used for this
connection as part of the traffic parameter conversion policy.
A value of zero indicates that the avgFrameSize is not yet available
for this connection.ro INTEGER .1.3.6.1.4.1.562.36.2.1.72.4.4.10.1.6 |
mscFrAtmDlciNiwfEquivalentBitRateThis attribute indicates the access reserved bandwidth for this FR-
ATM connection when CAC is on. If a connection is subcribed to
CIR only or CIR plus EIR service, the EBR reserved is CIR. If a
connection is subcribed to EIR only service, the EBR reserved is 0.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.72.4.4.10.1.7 |
mscFrAtmDlciNiwfAtmDlciThis attribute displays the DLCI logical channel used inside the
ATM VCC.
A null value indicates that the atmDlci is not yet available for this
connection.ro AsciiString .1.3.6.1.4.1.562.36.2.1.72.4.4.10.1.8 |
mscFrAtmDlciNiwfAssignedBandwidthPoolThis attribute specifies the bandwidth pool which is used by this
Dlci.ro Enumeration .1.3.6.1.4.1.562.36.2.1.72.4.4.10.1.9 |
mscFrAtmDlciEgSp OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.72.4.5 |
mscFrAtmDlciEgSpRowStatusTableThis entry controls the addition and deletion of
mscFrAtmDlciEgSp components. SEQUENCE OF MscFrAtmDlciEgSpRowStatusEntry .1.3.6.1.4.1.562.36.2.1.72.4.5.1 |
mscFrAtmDlciEgSpRowStatusEntryA single entry in the table represents a single
mscFrAtmDlciEgSp component. MscFrAtmDlciEgSpRowStatusEntry .1.3.6.1.4.1.562.36.2.1.72.4.5.1.1 |
mscFrAtmDlciEgSpRowStatusThis variable is used as the basis for SNMP naming of
mscFrAtmDlciEgSp components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.72.4.5.1.1.1 |
mscFrAtmDlciEgSpComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.72.4.5.1.1.2 |
mscFrAtmDlciEgSpStorageTypeThis variable represents the storage type value for the
mscFrAtmDlciEgSp tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.72.4.5.1.1.4 |
mscFrAtmDlciEgSpIndexThis variable represents the index for the mscFrAtmDlciEgSp tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.72.4.5.1.1.10 |
mscFrAtmDlciEgSpProvTableThis group contains the provisionable attributes of the egress
direction for the Data Link Connection Identifier. These attributes
reflect the service parameters for the egress direction specific to this
instance of Dlci. SEQUENCE OF MscFrAtmDlciEgSpProvEntry .1.3.6.1.4.1.562.36.2.1.72.4.5.10 |
mscFrAtmDlciEgSpProvEntryAn entry in the mscFrAtmDlciEgSpProvTable. MscFrAtmDlciEgSpProvEntry .1.3.6.1.4.1.562.36.2.1.72.4.5.10.1 |
mscFrAtmDlciEgSpCommittedInformationRateThis attribute specifies the committed information rate (CIR) for the
egress direction. It is used for bandwidth reservation for the purpose
of performing a Call Admission Control (CAC) function towards
the egress link.
This attribute is not used to perform rate enforcement towards the
egress link.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.72.4.5.10.1.1 |
mscFrAtmDlciEgSpCommittedBurstSizeThis attribute specifies the committed burst size (Bc) for the egress
direction. It is used for bandwidth reservation for the purpose of
performing a Call Admission Control (CAC) function towards the
egress link.
This attribute is not used to perform rate enforcement towards the
egress link.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.72.4.5.10.1.2 |
mscFrAtmDlciEgSpExcessBurstSizeThis attribute specifies the excess burst size (Be) for the egress
direction. It is used for bandwidth reservation for the purpose of
performing a Call Admission Control (CAC) function towards the
egress link.
This attribute is not used to perform rate enforcement towards the
egress link.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.72.4.5.10.1.3 |
mscFrAtmDlciEgSpMeasurementIntervalThis attribute specifies the time interval for the egress direction. It is
used for bandwidth reservation for the purpose of performing a Call
Admission Control (CAC) function towards the egress link.
This attribute is not used to perform rate enforcement towards the
egress link.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.72.4.5.10.1.4 |
mscFrAtmDlciStateTableThis group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. SEQUENCE OF MscFrAtmDlciStateEntry .1.3.6.1.4.1.562.36.2.1.72.4.10 |
mscFrAtmDlciStateEntryAn entry in the mscFrAtmDlciStateTable. MscFrAtmDlciStateEntry .1.3.6.1.4.1.562.36.2.1.72.4.10.1 |
mscFrAtmDlciAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.72.4.10.1.1 |
mscFrAtmDlciOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.ro Enumeration .1.3.6.1.4.1.562.36.2.1.72.4.10.1.2 |
mscFrAtmDlciUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.ro Enumeration .1.3.6.1.4.1.562.36.2.1.72.4.10.1.3 |
mscFrAtmDlciABitTableThis group contains the A-Bit status information for this Data Link
Connection Identifier. SEQUENCE OF MscFrAtmDlciABitEntry .1.3.6.1.4.1.562.36.2.1.72.4.11 |
mscFrAtmDlciABitEntryAn entry in the mscFrAtmDlciABitTable. MscFrAtmDlciABitEntry .1.3.6.1.4.1.562.36.2.1.72.4.11.1 |
mscFrAtmDlciABitStatusToIfThis attribute contains the most recent A-bit status sent to the
interface. The A-bit status is part of the LMI protocol, and indicates
the remote end's willingness to accept data from the local interface.
When an inactive setting is sent out, the Frame Relay service will
discard any data offered from the local interface. When an active
setting is sent out, the Frame Relay service tries to process all data
offered from the local interface.ro Enumeration .1.3.6.1.4.1.562.36.2.1.72.4.11.1.1 |
mscFrAtmDlciABitReasonToIfThis attribute provides the reason (if any) for an inactive status to be
sent to the interface. This reason is notApplicable for an active
status.ro Enumeration .1.3.6.1.4.1.562.36.2.1.72.4.11.1.2 |
mscFrAtmDlciABitStatusFromIfThis attribute indicates the most recent A-Bit status received from
the interface.ro Enumeration .1.3.6.1.4.1.562.36.2.1.72.4.11.1.3 |
mscFrAtmDlciABitReasonFromIfThis attribute provides the reason (if any) for an inactive status to be
sent to the subnet.
The value is notApplicable when the aBitStatusFromIf attribute is
active.
The value is remoteUserSignaled if the remote interface originating
the A-Bit status detects that the virtual circuit is down at the remote
network through the LMI protocol. The remote interface must be
running network site LMI protocol for this A-Bit status reason to be
sent.
The value is localLmiError if the LMI protocol is down at this
interface.
The value is localLinkDown if the physical link is disabled at this
interface.
The value is pvcDown if no A-Bit status has been sent to this
interface from the local network.
The value is missingFromLmiReport if the remote interface did not
provide a reason along with the inactive A-Bit status.
DESCRIPTIONro Enumeration .1.3.6.1.4.1.562.36.2.1.72.4.11.1.4 |
mscFrAtmDlciSpOpTableThis group contains service parameters for the Dlci component. SEQUENCE OF MscFrAtmDlciSpOpEntry .1.3.6.1.4.1.562.36.2.1.72.4.12 |
mscFrAtmDlciSpOpEntryAn entry in the mscFrAtmDlciSpOpTable. MscFrAtmDlciSpOpEntry .1.3.6.1.4.1.562.36.2.1.72.4.12.1 |
mscFrAtmDlciMaximumFrameSizeThis attribute indicates the maximum number of octets which can
be included in the information field. This definition does not include
the FrameRelay header and CRC octets. This attribute corresponds
to the dN1 parameter described in the Vendor Forum Specification.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.72.4.12.1.1 |
mscFrAtmDlciRateEnforcementThis attribute indicates whether rate enforcement is in effect for this
user Data Link Connection on this FrAtm interface.
When rate enforcement is on, Committed Information Rate (CIR)
and DE=1 traffic will be measured and enforced.
When rate enforcement is off, all frames from the user will be
accepted and no modifications to the frame with respect to the DE
bit will be made.ro Enumeration .1.3.6.1.4.1.562.36.2.1.72.4.12.1.2 |
mscFrAtmDlciCommittedInformationRateThis attribute indicates the committed information rate (CIR) in bits
per second (bit/s) and represents the rate at which the network
agrees to transfer information under normal conditions when
rateEnforcement is on. This rate is measured over a measurement
interval (t).
This attribute is not applicable when rateEnforcement is off.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.72.4.12.1.3 |
mscFrAtmDlciCommittedBurstSizeThis attribute indicates the committed burst size (Bc) in bits and
represents the amount of data that a network agrees to transfer
under normal conditions over a measurement interval (t) when
rateEnforcement is on. Data marked with DE=1 is not accounted for
in committed burst size.
This attribute is not applicable when rateEnforcement is off.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.72.4.12.1.4 |
mscFrAtmDlciExcessBurstSizeThis attribute indicates the excess burst size (Be) in bits and
represents the amount of uncommitted data that the network
attempts to deliver over measurement interval (t) when
rateEnforcement is on. Data marked DE=1 by the user or by the
network is accounted for here.
This attribute is not applicable ignored when rateEnforcement is
off.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.72.4.12.1.5 |
mscFrAtmDlciMeasurementIntervalThis attribute indicates the time interval over which rates and burst
sizes are measured.
This attribute is not applicable when rateEnforcement is off.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.72.4.12.1.6 |
mscFrAtmDlciEmissionPriorityToIfThis attribute indicates the emission priority of frames sent to the
interface.
If the value of FrAtm/n numberOfEmissionQs is 2, set the value of
this attribute to either 0 or 1; if the value of FrAtm/n
numberOfEmissionQs is 4, set the value of this attribute to one of 0,
1, 2, 3.ro INTEGER (0 | 1 | 2 | 3) .1.3.6.1.4.1.562.36.2.1.72.4.12.1.7 |
mscFrAtmDlciDlciTypeThis attribute indicates the type of DLCI.
A value of serviceInterworking indicates that a FrAtm/n Dlci/n Siwf
component is present.
A value of networkInterworking indicates that a FrAtm/n Dlci/n
Niwf component is present.ro Enumeration .1.3.6.1.4.1.562.36.2.1.72.4.12.1.8 |
mscFrAtmDlciTroubledThis attribute indicates whether or not the connection is in a
troubled state. Connections may become troubled for the following
reasons; if CAC failed to admit the call, or if one of the attributes
aBitStatusToIf, aBitStatusFromIf goes inactive; otherwise it is set to
no.ro Enumeration .1.3.6.1.4.1.562.36.2.1.72.4.12.1.9 |
mscFrAtmDlciTroubledReasonThis attribute provides the reason (if any) for a troubled connection.
A value of notApplicable indicates no current failures; either
Connection Admission Control (CAC) is off, or call was admitted.
A value of notAdmitted indicates the CAC algorithm fails to admit
this connection. Check if there is a sufficient bandwidth allocation.ro Enumeration .1.3.6.1.4.1.562.36.2.1.72.4.12.1.10 |
mscFrAtmDlciStatsTableThis group contains the operational statistics for the Frame Relay
Data Link Connection Identifier. SEQUENCE OF MscFrAtmDlciStatsEntry .1.3.6.1.4.1.562.36.2.1.72.4.13 |
mscFrAtmDlciStatsEntryAn entry in the mscFrAtmDlciStatsTable. MscFrAtmDlciStatsEntry .1.3.6.1.4.1.562.36.2.1.72.4.13.1 |
mscFrAtmDlciFrmToIfThis attribute counts the number of frames sent to the interface.
When the maximum count is reached, the count wraps to zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.72.4.13.1.1 |
mscFrAtmDlciFecnFrmToIfThis attribute counts the number of frames sent to the interface with
the Forward Explicit Congestion Notification (FECN) bit set. When
the maximum count is reached, the count wraps to zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.72.4.13.1.2 |
mscFrAtmDlciBecnFrmToIfThis attribute counts the number of frames sent to the interface with
the Backward Explicit Congestion Notification (BECN) bit set.
When the maximum count is reached, the count wraps to zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.72.4.13.1.3 |
mscFrAtmDlciDeFrmToIfThis attribute counts the number of frames sent to the interface with
the Discard Eligibility (DE) bit set. When the maximum count is
reached, the count wraps to zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.72.4.13.1.4 |
mscFrAtmDlciDiscCongestedToIfThis attribute counts the number of frame discards at the Frame
Relay service due to local congestion in the direction toward the
interface. When the maximum count is reached, the count wraps to
zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.72.4.13.1.5 |
mscFrAtmDlciDiscDeCongestedToIfThis attribute counts the number of discarded frames, with the
Discard Eligibility (DE) bit set, at the Frame Relay service, due to
local congestion in the direction toward the interface. When the
maximum count is reached, the count wraps to zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.72.4.13.1.6 |
mscFrAtmDlciFrmFromIfThis attribute counts the number of frames received from the
interface. Frames that are discarded due to error or excess are not
counted. When the maximum count is reached, the count wraps to
zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.72.4.13.1.7 |
mscFrAtmDlciFecnFrmFromIfThis attribute counts the number of frames received from the
interface with the Forward Explicit Congestion Notification (FECN)
bit set. When the maximum count is reached, the count wraps to
zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.72.4.13.1.8 |
mscFrAtmDlciBecnFrmFromIfThis attribute counts the number of frames received from the
interface with the Backward Explicit Congestion Notification
(BECN) bit set. When the maximum count is reached, the count
wraps to zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.72.4.13.1.9 |
mscFrAtmDlciEfciFrmFromNetworkThis attribute counts the number of frames received from the
interworking function with the Explicit Forward Congestion
Indication (EFCI) bit set. When the maximum count is reached, the
count wraps to zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.72.4.13.1.10 |
mscFrAtmDlciDeFrmFromIfThis attribute counts the number of frames received from the
interface with the Discard Eligibility (DE) bit set. When the
maximum count is reached, the count wraps to zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.72.4.13.1.11 |
mscFrAtmDlciExcessFrmFromIfThis attribute counts the number of frames received from the
interface with the Discard Eligibility (DE) bit clear, but
subsequently set by the network due to rate enforcement. When the
maximum count is reached, the count wraps to zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.72.4.13.1.12 |
mscFrAtmDlciDiscExcessFromIfThis attribute counts the number of frames which were discarded
due to rate enforcement. When the maximum count is reached, the
count wraps to zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.72.4.13.1.13 |
mscFrAtmDlciDiscFrameAbitThis attribute counts the number of frame discards at the Frame
Relay Service, due to an inactive PVC status, in the direction
toward the interworking function. When the maximum count is
reached, the count wraps to zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.72.4.13.1.14 |
mscFrAtmDlciDiscCongestedFromIfThis attribute counts the number of frame discards at the Frame
Relay service due to local congestion in the direction toward the
interworking function. When the maximum count is reached, the
count wraps to zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.72.4.13.1.15 |
mscFrAtmDlciDiscDeCongestedFromIfThis attribute counts the number of discarded frames, with the
Discard Eligibility (DE) bit set due to local congestion in the
direction toward the interworking function. When the maximum
count is reached, the count wraps to zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.72.4.13.1.16 |
mscFrAtmDlciErrorShortFrmFromIfThis attribute counts the number of frames received with 0 octets in
the information field. When the maximum count is reached, the
count wraps to zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.72.4.13.1.17 |
mscFrAtmDlciErrorLongFrmFromIfThis attribute counts the number of frames received with number of
octets in the information field greater than the subscribed
maximum. When the maximum count is reached, the count wraps to
zero. The hardware ignores frame lengths greater than the hardware
receive buffer, and therfore does not includes them in this count.ro Counter32 .1.3.6.1.4.1.562.36.2.1.72.4.13.1.18 |
mscFrAtmDlciBecnFrmSetByServiceThis attribute counts the number of frames with BECN set by the
Frame Relay service. It is incremented when the Frame Relay
service sets BECN on a frame upon detecting local congestion. This
count is incremented regardless of whether the frame already bears
a set BECN bit since its use is to determine the place of congestion.
When the maximum count is reached, the count wraps to zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.72.4.13.1.19 |
mscFrAtmDlciBytesToIfThis attribute counts the number of bytes sent out the interface.
When the maximum count is reached, the count wraps to zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.72.4.13.1.20 |
mscFrAtmDlciDeBytesToIfThis attribute counts the number of bytes sent to the interface with
the Discard Eligibility (DE) bit set. When the maximum count is
reached, the count wraps to zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.72.4.13.1.21 |
mscFrAtmDlciDiscCongestedToIfBytesThis attribute counts the number of byte discards at the Frame
Relay service due to local congestion in the direction toward the
link. When the maximum count is reached, the count wraps to zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.72.4.13.1.22 |
mscFrAtmDlciDiscDeCongestedToIfBytesThis attribute counts the number of discard eligible (DE=1) byte
discards at the Frame Relay service due to local congestion in the
direction toward the link. When the maximum count is reached, the
count wraps to zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.72.4.13.1.23 |
mscFrAtmDlciBytesFromIfThis attribute counts the number of bytes received from the
interface. Bytes that are discarded due to error or excess are not
counted. When the maximum count is reached, the count wraps to
zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.72.4.13.1.24 |
mscFrAtmDlciDeBytesFromIfThis attribute counts the number of bytes received from the
interface with the Discard Eligibility (DE) bit set. When the
maximum count is reached, the count wraps to zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.72.4.13.1.25 |
mscFrAtmDlciExcessBytesFromIfThis attribute counts the number of bytes received from the
interface with the Discard Eligibility (DE) bit clear, but
subsequently set by the network due to rate enforcement. When the
maximum count is reached, the count wraps to zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.72.4.13.1.26 |
mscFrAtmDlciDiscExcessFromIfBytesThis attribute counts the number of bytes which were discarded due
to rate enforcement. When the maximum count is reached, the
count wraps to zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.72.4.13.1.27 |
mscFrAtmDlciDiscByteAbitThis attribute counts the bytes number of which were discarded due
to the A-bit being turned off. When the maximum count is reached,
the count wraps to zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.72.4.13.1.28 |
mscFrAtmDlciDiscCongestedFromIfBytesThis attribute counts the number of byte discards at the Frame
Relay service due to local congestion in the direction toward the
interworking function. When the maximum count is reached, the
count wraps to zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.72.4.13.1.29 |
mscFrAtmDlciDiscDeCongestedFromIfBytesThis attribute counts the number of discard eligible (DE=1) byte
discards at the Frame Relay service due to local congestion in the
direction toward the interworking function. When the maximum
count is reached, the count wraps to zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.72.4.13.1.30 |
mscFrAtmDlciErrorShortBytesFromIfThis attribute counts the number of bytes received with 0 octets in
the information field. When the maximum count is reached, the
count wraps to zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.72.4.13.1.31 |
mscFrAtmDlciErrorLongBytesFromIfThis attribute counts the number of bytes received when the number
of octets in the information field is greater than the subscribed
maximum. The hardware ignores bytes lengths greater than the
hardware receive buffer and therefore does not include them in this
count.
When the maximum count is reached, the count wraps to zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.72.4.13.1.32 |
mscFrAtmDlciCalldTableThis group contains the operational values for the FrAtm Dlci call
data. If the accountingEnabled attribute is no, then this group
except for accountingEnabled is not displayed. SEQUENCE OF MscFrAtmDlciCalldEntry .1.3.6.1.4.1.562.36.2.1.72.4.14 |
mscFrAtmDlciCalldEntryAn entry in the mscFrAtmDlciCalldTable. MscFrAtmDlciCalldEntry .1.3.6.1.4.1.562.36.2.1.72.4.14.1 |
mscFrAtmDlciAccountingEnabledThis attribute indicates whether accounting is enabled. To enable
accounting, the FrAtm Ca accountCollection attribute must be non-
empty and FrAtm Dlci Sp accounting attribute must be on.ro Enumeration .1.3.6.1.4.1.562.36.2.1.72.4.14.1.1 |
mscFrAtmDlciAccountingEndThis attribute indicates whether this DLCI represents the called or
calling end of the connection. If the accountingEnabled attribute is
no, then this attribute is not displayed.ro Enumeration .1.3.6.1.4.1.562.36.2.1.72.4.14.1.2 |
mscFrAtmDlciCorrelationTagThis attribute indicates the unique string which identifies this
connection. The value of this operational attribute can be
provisioned in the correlationTag attribute of either the Siwf Npvc,
Siwf Spvc, or Niwf Spvc subcomponents. For the Siwf Spvc and Niwf
Spvc cases, when the provisionable correlationTag is an empty
string, then this attribute receives the value of a system- generated
correlationTag. Downstream processing uses this attribute to
correlate accounting records issued at different nodes in the
network. If the accountingEnabled attribute is no, then this attribute
is not displayed.ro HexString .1.3.6.1.4.1.562.36.2.1.72.4.14.1.3 |
mscFrAtmDlciIntTableThis group contains the operational statistics for the FrAtm Dlci
interval data. SEQUENCE OF MscFrAtmDlciIntEntry .1.3.6.1.4.1.562.36.2.1.72.4.15 |
mscFrAtmDlciIntEntryAn entry in the mscFrAtmDlciIntTable. MscFrAtmDlciIntEntry .1.3.6.1.4.1.562.36.2.1.72.4.15.1 |
mscFrAtmDlciStartTimeThis attribute indicates the start time of this interval. A new interval
is started each time an accounting record is generated and call at a
setup. If the accountingEnabled attribute is no, then this attribute is
not displayed.ro EnterpriseDateAndTime .1.3.6.1.4.1.562.36.2.1.72.4.15.1.1 |
mscFrAtmDlciTotalIngressBytesThis attribute counts the total payload bytes in received from the
link since the start of the interval. To calculate total valid payload
bytes received from link, subtract discardedBytes from this
attribute. The start of the interval is captured in the startTime
attribute. The count is reset to zero when an accounting record is
generated or at call setup. If the accountingEnabled attribute is no,
then this attribute is not displayed.ro Unsigned64 .1.3.6.1.4.1.562.36.2.1.72.4.15.1.2 |
mscFrAtmDlciTotalEgressBytesThis attribute counts the total payload bytes sent to the link since
the start of the interval. The start of the interval is captured in the
startTime attribute. The count is reset to zero when an accounting
record is generated or at call setup. If the accountingEnabled
attribute is no, then this attribute is not displayed.ro Unsigned64 .1.3.6.1.4.1.562.36.2.1.72.4.15.1.3 |
mscFrAtmDlciEirIngressBytesThis attribute counts the total valid payload bytes in frames with the
Discard Eligibility (DE) bit set to 1 received from the link since the
start of the interval. Subtract this attribute and discardedBytes from
totalIngressBytes to calculate total valid payload bytes in frames
received from the link, with the DE bit set to 0. The start of the
interval is captured in the startTime attribute. The count is reset to
zero when an accounting record is generated or at call setup. If the
accountingEnabled attribute is no, then this attribute is not
displayed.ro Unsigned64 .1.3.6.1.4.1.562.36.2.1.72.4.15.1.4 |
mscFrAtmDlciEirEgressBytesThis attribute counts the total valid payload bytes in frames with the
Discard Eligibility (DE) bit set sent to the link since the start of the
interval. Subtract the value of this attribute from totalEgressBytes to
calculate total valid payload bytes in frames, with DE set to 0, sent
to the link. The start of the interval is captured in the startTime
attribute. The count is reset to zero when an accounting record is
generated or at call setup. If the accountingEnabled attribute is no,
then this attribute is not displayed.ro Unsigned64 .1.3.6.1.4.1.562.36.2.1.72.4.15.1.5 |
mscFrAtmDlciDiscardedBytesThis attribute counts the total payload bytes in invalid frames
received from the link and discarded at the DLCI since the start of
the interval. This count is a sum of octets in frames discarded due
to: frames too long or too short; A-Bit off; or to rate enforcement.
The start of the interval is captured in the startTime attribute. The
count is reset to zero when an accounting record is generated or at
call setup. If the accountingEnabled attribute is no, then this
attribute is not displayed.ro Unsigned64 .1.3.6.1.4.1.562.36.2.1.72.4.15.1.6 |
mscFrAtmDlciTotalIngressFramesThis attribute counts the total number of frames received from the
link since the start of the interval. To calculate the total valid
number of frames received from the link, subtract discardedFrames
from this attribute. The start of the interval is captured in the
startTime attribute. The count is reset to zero when an accounting
record is generated or at call setup. If the accountingEnabled
attribute is no, then this attribute is not displayed.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.72.4.15.1.7 |
mscFrAtmDlciTotalEgressFramesThis attribute counts the total number of frames sent to the link
since the start of the interval. The start of the interval is captured in
the startTime attribute. The count is reset to zero when an
accounting record is generated or at call setup. If the
accountingEnabled attribute is no, then this attribute is not
displayed.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.72.4.15.1.8 |
mscFrAtmDlciEirIngressFramesThis attribute counts the number of valid frames with the Discard
Eligibility (DE) bit set to 1 received from the link since the start of
the interval. Subtract this attribute and discardedFrames from
totalIngressFrames to calculate total valid frames received from the
link, with the DE bit set to 0. The start of the interval is captured in
the startTime attribute. The count is reset to zero when an
accounting record is generated or at call setup. If the
accountingEnabled attribute is no, then this attribute is not
displayed.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.72.4.15.1.9 |
mscFrAtmDlciEirEgressFramesThis attribute counts the number of frames with the Discard
Eligibility (DE) bit set sent to the link since the start of the interval.
Subtract the value of this attribute from totalEgressFrames to
calculate total frames, with DE set to 0, sent to the link.The start of
the interval is captured in the startTime attribute. The count is reset
to zero when an accounting record is generated call setup. If the
accountingEnabled attribute is no, then this attribute is not
displayed.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.72.4.15.1.10 |
mscFrAtmDlciDiscardedFramesThis attribute counts the number of invalid frames received from the
link and discarded at the DLCI. The count is reset to zero when an
accounting record is generated or at call setup. The count is a sum
of frames discarded due to: frames too long or too short; A-Bit is
off; or rate enforcement. If the accountingEnabled attribute is no,
then this attribute is not displayed.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.72.4.15.1.11 |
mscFrAtmDlciElapsedDifferenceThis attribute indicates the elapsed time representing the of this
interval data. It is the elapsed time in 0.1 second increments since
the start of the interval. If the accountingEnabled attribute is no,
then this attribute is not displayed.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.72.4.15.1.12 |
mscFrAtmVFramer OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.72.5 |
mscFrAtmVFramerRowStatusTableThis entry controls the addition and deletion of
mscFrAtmVFramer components. SEQUENCE OF MscFrAtmVFramerRowStatusEntry .1.3.6.1.4.1.562.36.2.1.72.5.1 |
mscFrAtmVFramerRowStatusEntryA single entry in the table represents a single
mscFrAtmVFramer component. MscFrAtmVFramerRowStatusEntry .1.3.6.1.4.1.562.36.2.1.72.5.1.1 |
mscFrAtmVFramerRowStatusThis variable is used as the basis for SNMP naming of
mscFrAtmVFramer components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.72.5.1.1.1 |
mscFrAtmVFramerComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.72.5.1.1.2 |
mscFrAtmVFramerStorageTypeThis variable represents the storage type value for the
mscFrAtmVFramer tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.72.5.1.1.4 |
mscFrAtmVFramerIndexThis variable represents the index for the mscFrAtmVFramer tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.72.5.1.1.10 |
mscFrAtmVFramerProvTableThis group contains provisionable attributes for the VirtualFramer
component. SEQUENCE OF MscFrAtmVFramerProvEntry .1.3.6.1.4.1.562.36.2.1.72.5.10 |
mscFrAtmVFramerProvEntryAn entry in the mscFrAtmVFramerProvTable. MscFrAtmVFramerProvEntry .1.3.6.1.4.1.562.36.2.1.72.5.10.1 |
mscFrAtmVFramerOtherVirtualFramerThis attribute specifies the other VirtualFramer to which the service
is linked, for example, FrUni/n VirtualFramer, FrDte/n
VirtualFramer.rw Link .1.3.6.1.4.1.562.36.2.1.72.5.10.1.1 |
mscFrAtmVFramerLogicalProcessorThis attribute specifies the logical processor on which the service
component will reside.rw Link .1.3.6.1.4.1.562.36.2.1.72.5.10.1.2 |
mscFrAtmVFramerStateTableThis group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. SEQUENCE OF MscFrAtmVFramerStateEntry .1.3.6.1.4.1.562.36.2.1.72.5.11 |
mscFrAtmVFramerStateEntryAn entry in the mscFrAtmVFramerStateTable. MscFrAtmVFramerStateEntry .1.3.6.1.4.1.562.36.2.1.72.5.11.1 |
mscFrAtmVFramerAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.72.5.11.1.1 |
mscFrAtmVFramerOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.ro Enumeration .1.3.6.1.4.1.562.36.2.1.72.5.11.1.2 |
mscFrAtmVFramerUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.ro Enumeration .1.3.6.1.4.1.562.36.2.1.72.5.11.1.3 |
mscFrAtmVFramerStatsTableThis group contains the operational statistics data for a
VirtualFramer component. SEQUENCE OF MscFrAtmVFramerStatsEntry .1.3.6.1.4.1.562.36.2.1.72.5.12 |
mscFrAtmVFramerStatsEntryAn entry in the mscFrAtmVFramerStatsTable. MscFrAtmVFramerStatsEntry .1.3.6.1.4.1.562.36.2.1.72.5.12.1 |
mscFrAtmVFramerFrmToOtherVFramerThis attribute counts the frames transmitted to the
otherVirtualFramer.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.72.5.12.1.2 |
mscFrAtmVFramerFrmFromOtherVFramerThis attribute counts the frames received from the
otherVirtualFramer.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.72.5.12.1.3 |
mscFrAtmVFramerOctetFromOtherVFramerThis attribute counts the octets received from the
otherVirtualFramer.ro PassportCounter64 .1.3.6.1.4.1.562.36.2.1.72.5.12.1.5 |
mscFrAtmAddr OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.72.6 |
mscFrAtmAddrRowStatusTableThis entry controls the addition and deletion of
mscFrAtmAddr components. SEQUENCE OF MscFrAtmAddrRowStatusEntry .1.3.6.1.4.1.562.36.2.1.72.6.1 |
mscFrAtmAddrRowStatusEntryA single entry in the table represents a single
mscFrAtmAddr component. MscFrAtmAddrRowStatusEntry .1.3.6.1.4.1.562.36.2.1.72.6.1.1 |
mscFrAtmAddrRowStatusThis variable is used as the basis for SNMP naming of
mscFrAtmAddr components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.72.6.1.1.1 |
mscFrAtmAddrComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.72.6.1.1.2 |
mscFrAtmAddrStorageTypeThis variable represents the storage type value for the
mscFrAtmAddr tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.72.6.1.1.4 |
mscFrAtmAddrIndexThis variable represents the index for the mscFrAtmAddr tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.72.6.1.1.10 |
mscFrAtmAddrProvTableThis group specifies the address of the FrAtm Interface. SEQUENCE OF MscFrAtmAddrProvEntry .1.3.6.1.4.1.562.36.2.1.72.6.10 |
mscFrAtmAddrProvEntryAn entry in the mscFrAtmAddrProvTable. MscFrAtmAddrProvEntry .1.3.6.1.4.1.562.36.2.1.72.6.10.1 |
mscFrAtmAddrAddressThis attribute contains digits which form the unique identifier of the
customer. It is the equivalent of the telephone number in the
telephone network (either native E.164 or X.121 address formats, or
Atm End System Address(AESA) in ISO NSAP format.).
For example, E.164 prefix 'e.613722', X.121 prefix 'x.302', NSAP
'45000441812460730F000000000020480D200100'.rw AsciiString .1.3.6.1.4.1.562.36.2.1.72.6.10.1.2 |
mscFrAtmAddrAddrOpTableThis group display the address of the FrAtm Interface. SEQUENCE OF MscFrAtmAddrAddrOpEntry .1.3.6.1.4.1.562.36.2.1.72.6.11 |
mscFrAtmAddrAddrOpEntryAn entry in the mscFrAtmAddrAddrOpTable. MscFrAtmAddrAddrOpEntry .1.3.6.1.4.1.562.36.2.1.72.6.11.1 |
mscFrAtmAddrMyAddressThis attribute displays the parent FRATM component's address in
the ISO NSAP format.ro AsciiString .1.3.6.1.4.1.562.36.2.1.72.6.11.1.1 |
mscFrAtmCa OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.72.7 |
mscFrAtmCaRowStatusTableThis entry controls the addition and deletion of
mscFrAtmCa components. SEQUENCE OF MscFrAtmCaRowStatusEntry .1.3.6.1.4.1.562.36.2.1.72.7.1 |
mscFrAtmCaRowStatusEntryA single entry in the table represents a single
mscFrAtmCa component. MscFrAtmCaRowStatusEntry .1.3.6.1.4.1.562.36.2.1.72.7.1.1 |
mscFrAtmCaRowStatusThis variable is used as the basis for SNMP naming of
mscFrAtmCa components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.72.7.1.1.1 |
mscFrAtmCaComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.72.7.1.1.2 |
mscFrAtmCaStorageTypeThis variable represents the storage type value for the
mscFrAtmCa tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.72.7.1.1.4 |
mscFrAtmCaIndexThis variable represents the index for the mscFrAtmCa tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.72.7.1.1.10 |
mscFrAtmCaTpm OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.72.7.2 |
mscFrAtmCaTpmRowStatusTableThis entry controls the addition and deletion of
mscFrAtmCaTpm components. SEQUENCE OF MscFrAtmCaTpmRowStatusEntry .1.3.6.1.4.1.562.36.2.1.72.7.2.1 |
mscFrAtmCaTpmRowStatusEntryA single entry in the table represents a single
mscFrAtmCaTpm component. MscFrAtmCaTpmRowStatusEntry .1.3.6.1.4.1.562.36.2.1.72.7.2.1.1 |
mscFrAtmCaTpmRowStatusThis variable is used as the basis for SNMP naming of
mscFrAtmCaTpm components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.72.7.2.1.1.1 |
mscFrAtmCaTpmComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.72.7.2.1.1.2 |
mscFrAtmCaTpmStorageTypeThis variable represents the storage type value for the
mscFrAtmCaTpm tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.72.7.2.1.1.4 |
mscFrAtmCaTpmIndexThis variable represents the index for the mscFrAtmCaTpm tables. Integer32 .1.3.6.1.4.1.562.36.2.1.72.7.2.1.1.10 |
mscFrAtmCaTpmProvTableThis attribute group contains the provisionable attributes of the Tpm
component at this interface. SEQUENCE OF MscFrAtmCaTpmProvEntry .1.3.6.1.4.1.562.36.2.1.72.7.2.10 |
mscFrAtmCaTpmProvEntryAn entry in the mscFrAtmCaTpmProvTable. MscFrAtmCaTpmProvEntry .1.3.6.1.4.1.562.36.2.1.72.7.2.10.1 |
mscFrAtmCaTpmAssignedBandwidthPoolThis attribute specifies the bandwidth pool that supports this
transfer priority at this interface.rw Enumeration .1.3.6.1.4.1.562.36.2.1.72.7.2.10.1.1 |
mscFrAtmCaTpmTrafficParmConvPolicyThis attribute specifies the traffic parameter conversion policy to use
for a specific transfer priority for specifying equivalent bandwidth
rate at the FrAtm interface.
Policy 3 characterizes the traffic in the following way:
- ATM traffic descriptor type 6 is selected
- ATM service category rtVbr and nrtVbr supported only
- PCR0+1 is based on AR
- SCR0+1 is based on CIR and EIR
- MBS0+1 is based on Bc, Be, CIR, EIR and AR
- Takes into account that the instantaneous rate of the Frame Relay
stream can be above CIR and up to the AR.
Policy 4 characterizes the traffic in the following way:
- ATM traffic descriptor type 7 or 8 is selected. Type 7 is chosen
when non-conforming cells are to be discarded and type 8 when
non-conforming cells are tagged by the UPC traffic policer.
- PCR0+1 is based on AR
- ATM service category rtVbr and nrtVbr supported only
- SCR0 is based on CIR
- MBS0 is based on Bc, CIR, and AR
- There is no direct characterization of EIR. The allowed EIR can be
derived using the difference between the AR and CIR.
Policy 5 characterizes the traffic in the following way:
- ATM traffic descriptor type 7 or 8 is selected. Type 7 is chosen
when non-conforming cells are to be discarded and type 8 when
non-conforming cells are tagged by the UPC traffic policer.
- ATM service category rtVbr and nrtVbr supported only
- PCR0+1 is based on CIR for descriptor type 7
- PCR0+1 is based on CIR and EIR for descriptor type 8
- SCR0 is based on CIR
- MBS0 is based on Bc, CIR, and AR
- The maximum PCR is no longer based on the AR but rather on the
CIR and EIR or CIR
Policy 6 characterizes the traffic in the following way:
- ATM traffic descriptor type 3 is selected
- ATM service category ubr, cbr, rtVbr and nrtVbr supported only
- PCR0+1 is based only on CIR.
The default value sameAsModule implies the
trafficParmConversionPolicy of Mod Frs AtmNet Tpm/n is as
defined as Mod Frs AtmNet Tpm/n.rw Enumeration .1.3.6.1.4.1.562.36.2.1.72.7.2.10.1.2 |
mscFrAtmCaTpmAverageFrameSizeThis attribute specifies the average frame size at the FrAtm interface
for connections using this transfer priority. If a value of 0 is
specified, the average frame size defined in Mod Frs AtmNet Tpm/n
avgFrameSize attribute is used.rw INTEGER .1.3.6.1.4.1.562.36.2.1.72.7.2.10.1.3 |
mscFrAtmCaProvTableThis attribute group contains the common provisionable attributes
of the Ca component. SEQUENCE OF MscFrAtmCaProvEntry .1.3.6.1.4.1.562.36.2.1.72.7.10 |
mscFrAtmCaProvEntryAn entry in the mscFrAtmCaProvTable. MscFrAtmCaProvEntry .1.3.6.1.4.1.562.36.2.1.72.7.10.1 |
mscFrAtmCaCallAdmissionControlThis attribute specifies the control to turn on Call Admission
Control (CAC). The default value for CAC is off.rw Enumeration .1.3.6.1.4.1.562.36.2.1.72.7.10.1.1 |
mscFrAtmCaOverrideLinkRateThis attribute allows the link rate to be overridden for this interface.
This allows the user to specify a value other than the actual physical
link rate computed when a Framer component is provisioned. In
the absence of a Framer component, or when a VirtualFramer
component is provisioned, this value needs to be explictly set to
provide an equivalent link rate.
This attribute provides control on the amount of bandwidth
available for performing CAC. This attribute also provides the
requested amount of bandwidth that is negotiated across an ATM
network for traffic conversion polices 3 and 4, since these policies
are a function of the access rate.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.72.7.10.1.2 |
mscFrAtmCaSdTableThis group contains provisionable service interworking attributes
for the FrAtm component. The attributes defined in this group
provide the defaults for all the connections on the FrAtm interface. SEQUENCE OF MscFrAtmCaSdEntry .1.3.6.1.4.1.562.36.2.1.72.7.11 |
mscFrAtmCaSdEntryAn entry in the mscFrAtmCaSdTable. MscFrAtmCaSdEntry .1.3.6.1.4.1.562.36.2.1.72.7.11.1 |
mscFrAtmCaSdModeThis attribute specifies the mode of interoperability between the
Frame Relay and ATM connections regarding upper layer protocol
encapsulations. This is used as the default for all the connections on
the interface.
When translationMode is selected, the interworking function
performs translations between RFC1490 and RFC1483
encapsulated headers. This includes routed protocol translation,
bridged protocol translation, and connection oriented protocol
translation (except for RFC 1490 connection oriented protocol
without RFC 1490 header, which is done in speTranslationMode).
A value of transparentMode indicates that the interworking
function is forwarding data without altering the upper layer user
protocol encapsulation. Use transparent mode when the upper layer
user protocol encapsulation methods are compatible between
terminal equipments.
A value of speTranslationMode indicates that the interworking
function performs single protocol translation between RFC1490
with no header and RFC1483 encapsulated packets.rw Enumeration .1.3.6.1.4.1.562.36.2.1.72.7.11.1.1 |
mscFrAtmCaSdDeToClpMappingThis attribute specifies the DE to CLP mapping that is performed in
the Frame Relay to ATM direction. This is used as the default for all
the connections on the interface.
When preserve is selected, the DE field in a Q.922 core frame
copies to the ATM CLP field of every cell containing the
information of that frame.
When always0 is selected, the CLP field of every generated ATM
cell is always 0.
When always1 is selected, the CLP field of every generated ATM
cell is always 1.rw Enumeration .1.3.6.1.4.1.562.36.2.1.72.7.11.1.2 |
mscFrAtmCaSdClpToDeMappingThis attribute specifies the type of CLP to DE mapping that is
performed in the ATM to Frame Relay direction.
When preserve is selected, the DE field of the Q.922 core frame is
set when one or more ATM cells belonging to an AAL5 frame has
its CLP field set.
When always0 is selected, the DE field of the Q.922 core frame is
always set to 0.
When always1 is selected, the DE field of the Q.922 core frame is
always set to 1.rw Enumeration .1.3.6.1.4.1.562.36.2.1.72.7.11.1.3 |
mscFrAtmCaSdFecnToEfciMappingThis attribute specifies the type of FECN to EFCI mapping that is
performed in the Frame Relay to ATM direction.
When preserve is selected, the FECN field in the Q.922 Core frame
maps directly to the ATM EFCI field of every cell generated by the
AAL5 segmentation process.
When always0 is selected, the EFCI field in every ATM cell
generated is set to 0.rw Enumeration .1.3.6.1.4.1.562.36.2.1.72.7.11.1.4 |
mscFrAtmCaSdCrToUuMappingThis attribute indicates the type of CR to UU mapping that is
performed in the Frame Relay to ATM direction.
A value of preserve indicates that the CR field in the Q.922 Core
frame maps directly to the ATM UU field of every cell generated by
the AAL5 segmentation process.
A value of always0 indicates that the UU field in every ATM cell
generated is set to 0.rwobsolete Enumeration .1.3.6.1.4.1.562.36.2.1.72.7.11.1.5 |
mscFrAtmCaNdTableThis group contains the default provisionable networking attributes
for the FrAtm component. SEQUENCE OF MscFrAtmCaNdEntry .1.3.6.1.4.1.562.36.2.1.72.7.12 |
mscFrAtmCaNdEntryAn entry in the mscFrAtmCaNdTable. MscFrAtmCaNdEntry .1.3.6.1.4.1.562.36.2.1.72.7.12.1 |
mscFrAtmCaNdDeToClpMappingThis attribute specifies the type of DE to CLP mapping to be
performed in the Frame Relay to ATM direction.
When preserve is selected, the DE field in the Q.922 core frame
copies to the CLP field of every ATM cell containing the frame.
When always0 is selected, the CLP field of every ATM cell is
always set to 0.
When always1 is selected, the CLP field of every ATM cell is
always set to 1.rw Enumeration .1.3.6.1.4.1.562.36.2.1.72.7.12.1.1 |
mscFrAtmCaNdClpToDeMappingThis attribute specifies the type of CLP to DE mapping to be
performed in the ATM to Frame Relay direction.
When preserve is selected, the DE field of the Q.922 core frame is
set when one or more ATM cells belonging to the frame has its CLP
field set, or when the DE field of the FR-SSCS PDU is set.
When transparent is selected, the DE field of the Q.922 core frame
copies directly from the DE field of the FR-SSCS PDU.rw Enumeration .1.3.6.1.4.1.562.36.2.1.72.7.12.1.2 |
mscFrAtmCaIfQoSTableThis attribute group contains the provisionable quality of service
attributes for the parent FrAtm interface. SEQUENCE OF MscFrAtmCaIfQoSEntry .1.3.6.1.4.1.562.36.2.1.72.7.13 |
mscFrAtmCaIfQoSEntryAn entry in the mscFrAtmCaIfQoSTable. MscFrAtmCaIfQoSEntry .1.3.6.1.4.1.562.36.2.1.72.7.13.1 |
mscFrAtmCaSiwfEmissionPriorityToIfThis attribute specifies the emission priority of frames sent to this
FrAtm interface from its service interworking functions. Frames in
a higher priority queue, designated by a numerically higher number,
are sent before frames in a lower priority queue.
The value of this attribute is interpreted according to the value of
the provisionable attribute numberOfEmissionQs under the parent
FrAtm component. If the numberOfEmissionQs attribute is set to 2,
siwfEmissionPriorityToIf value of 0 maps to emission priority
queue 0 representing a lower priority queue, and
siwfEmissionPriorityToIf values of 1, 2 or 3 map to emission
priority queue 1 representing the highest priority queue. If the
numberOfEmissionQs is set to 4, the siwfEmissionPriorityToIf
values directly map to the emission priority queues.
A value of deriveFromTp specifies that the emission priority is
extracted from the Mod Frs AtmNet Tpm/n component using the
siwfTransferPriority attribute.
The siwfEmissionPriorityToIf can also be overridden on a per
connection basis by setting the emissionPriorityToIf attribute in the
FrAtm Dlci Siwf Qos component.rw Enumeration .1.3.6.1.4.1.562.36.2.1.72.7.13.1.1 |
mscFrAtmCaSiwfTransferPriorityThis attribute specifies the transfer priority of frames sent to and
received from the ATM connection, through the service
interworking functions of this interface.
In the Frame Relay to ATM direction, the stp selects the ATM
service category of the connection.
In the ATM to Frame Relay direction, the stp selects the FrAtm
emission priority queue.
The siwfTransferPriority can also be overridden on a per
connection basis by setting the transferPriority atribute in the
FrAtm Dlci Siwf Qos component.rw INTEGER .1.3.6.1.4.1.562.36.2.1.72.7.13.1.2 |
mscFrAtmCaNiwfEmissionPriorityToIfThis attribute specifies the emission priority of frames sent to this
FrAtm interface from its network interworking functions. Frames in
a higher priority queue are sent before frames in a lower priority
queue.
The value of this attribute is interpreted according to the value of
the provisionable attribute numberOfEmissionQs under the parent
FrAtm component. If the numberOfEmissionQs attribute is set to 2,
niwfEmissionPriorityToIf value of 0 maps to emission priority
queue 0 representing a lower priority queue, and
niwfEmissionPriorityToIf values of 1, 2 or 3 map to emission
priority queue 1 representing the highest priority queue. If the
numberOfEmissionQs is set to 4, the emissionPrioToIf values
directly assign to the emission priority queues.
A value of deriveFromTp specifies that the emission priority is
extracted from the Mod Frs AtmNet Tpm/n component using the
niwfTransferPriority attribute.
The niwfEmissionPriorityToIf can also be overridden on a per
connection basis by setting the emissionPriorityToIf atribute in the
FrAtm Dlci Niwf Qos component.rw Enumeration .1.3.6.1.4.1.562.36.2.1.72.7.13.1.3 |
mscFrAtmCaNiwfTransferPriorityThis attribute specifies the transfer priority of frames sent to and
received from the ATM connection, through the network
interworking functions of this interface.
In the Frame Relay to ATM direction, the ntp selects the
Frf5EndPoint which multiplexes the frames.
In the ATM to Frame Relay direction, the ntp selects the default
FrAtm emission priority queue.
The niwfTransferPriority can also be overridden on a per
connection basis by setting the transferPriority atribute in the
FrAtm Dlci Niwf Qos component.rw INTEGER .1.3.6.1.4.1.562.36.2.1.72.7.13.1.4 |
mscFrAtmCaOpTableThis attribute group contains the operational status of the Ca
component. SEQUENCE OF MscFrAtmCaOpEntry .1.3.6.1.4.1.562.36.2.1.72.7.14 |
mscFrAtmCaOpEntryAn entry in the mscFrAtmCaOpTable. MscFrAtmCaOpEntry .1.3.6.1.4.1.562.36.2.1.72.7.14.1 |
mscFrAtmCaLinkRateThis attribute indicates the link rate.
If the provisionable attribute, overrideLinkRate, under the Ca
component is 0, then the link rate reported is the actual link rate of
the port or channel. Otherwise, the link rate reported is the
overrideLinkRate provisioned under the Ca component.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.72.7.14.1.1 |
mscFrAtmCaNailedUpPvcsThis attribute indicates the number of nailed-Up PVCs currently
provisioned on this interface.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.72.7.14.1.3 |
mscFrAtmCaTroubledDlcisThis attribute indicates the total number of DLCIs that are disabled
and are experiencing problems. This counter increments as a
result of the following problem scenarios:
Abit down, PVC down, local CAC failure, or call setup failure due
to network problem.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.72.7.14.1.5 |
mscFrAtmCaSoftPvcsThis attribute indicates the number of soft PVCs currently
provisioned on this interface.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.72.7.14.1.6 |
mscFrAtmCaAccountingOptionsTableThis group contains the common provisioned attributes for
accounting on a FrAtm. SEQUENCE OF MscFrAtmCaAccountingOptionsEntry .1.3.6.1.4.1.562.36.2.1.72.7.15 |
mscFrAtmCaAccountingOptionsEntryAn entry in the mscFrAtmCaAccountingOptionsTable. MscFrAtmCaAccountingOptionsEntry .1.3.6.1.4.1.562.36.2.1.72.7.15.1 |
mscFrAtmCaAccountClassThis attribute specifies the accounting class, which is reserved for
network operations usage. Its value is an arbitrary number. The
accounting records the value of this attribute.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.72.7.15.1.1 |
mscFrAtmCaAccountCollectionThis attribute controls accounting data collection at the interface
level. It contains the following values: bill, test, study, audit, force
which are used to specify the reason(s) for which accounting
records are collected. If the bill, test, study and audit options are
selected in the accountCollection field, accounting records are
collected for bill, test, study, or audit purposes. If the force option
is selected in the accountCollection field, accounting records are
collected regardless of whether other reasons are provisioned. If no
reason is provisioned for this attribute, then accounting data
collection does not occur.
Description of bits:
bill(0)
test(1)
study(2)
audit(3)
force(4)rw OCTET STRING .1.3.6.1.4.1.562.36.2.1.72.7.15.1.2 |
mscFrAtmCaServiceExchangeThis attribute is an arbitrary number, which is reserved for network
operations usage. It is recorded in the accounting record.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.72.7.15.1.3 |
mscFrAtmCaBwPoolTablePort capacity is partitioned into 16 pools (pool 0 through pool 15).
This attribute specifies the percentage of port capacity that is
allowed for each pool. The percentage for each pool ranges from
0% to 1000%. It allows for under or over subscription of the port.
Under subscription occurs when the sum of the percentage assigned
to the 16 pools is less than 100%. Over subscription occurs when
the sum of the percentage for the 16 pools exceeds 100%. The sum
of the percentage assigned to the 16 pools cannot exceed 1000%.
The default is full sharing of port capacity without pre-set partitions
between transfer priorities. SEQUENCE OF MscFrAtmCaBwPoolEntry .1.3.6.1.4.1.562.36.2.1.72.7.365 |
mscFrAtmCaBwPoolEntryAn entry in the mscFrAtmCaBwPoolTable. MscFrAtmCaBwPoolEntry .1.3.6.1.4.1.562.36.2.1.72.7.365.1 |
mscFrAtmCaBwPoolIndexThis variable represents the mscFrAtmCaBwPoolTable
specific index for the mscFrAtmCaBwPoolTable. Integer32 .1.3.6.1.4.1.562.36.2.1.72.7.365.1.1 |
mscFrAtmCaBwPoolValueThis variable represents an individual value for the
mscFrAtmCaBwPoolTable.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.72.7.365.1.2 |
mscFrAtmCaPoolProvBwTableThis attribute indicates the total bandwidth requested for
provisioned connections from each bandwidth pool. Total
bandwidth for a given pool can be oversubcribed or undersubcribed. SEQUENCE OF MscFrAtmCaPoolProvBwEntry .1.3.6.1.4.1.562.36.2.1.72.7.366 |
mscFrAtmCaPoolProvBwEntryAn entry in the mscFrAtmCaPoolProvBwTable. MscFrAtmCaPoolProvBwEntry .1.3.6.1.4.1.562.36.2.1.72.7.366.1 |
mscFrAtmCaPoolProvBwIndexThis variable represents the mscFrAtmCaPoolProvBwTable
specific index for the mscFrAtmCaPoolProvBwTable. Integer32 .1.3.6.1.4.1.562.36.2.1.72.7.366.1.1 |
mscFrAtmCaPoolProvBwValueThis variable represents an individual value for the
mscFrAtmCaPoolProvBwTable.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.72.7.366.1.2 |
mscFrAtmCaPoolAvailBwTableThis attribute indicates the total available bandwidth from the
bandwidth pool. SEQUENCE OF MscFrAtmCaPoolAvailBwEntry .1.3.6.1.4.1.562.36.2.1.72.7.367 |
mscFrAtmCaPoolAvailBwEntryAn entry in the mscFrAtmCaPoolAvailBwTable. MscFrAtmCaPoolAvailBwEntry .1.3.6.1.4.1.562.36.2.1.72.7.367.1 |
mscFrAtmCaPoolAvailBwIndexThis variable represents the mscFrAtmCaPoolAvailBwTable
specific index for the mscFrAtmCaPoolAvailBwTable. Integer32 .1.3.6.1.4.1.562.36.2.1.72.7.367.1.1 |
mscFrAtmCaPoolAvailBwValueThis variable represents an individual value for the
mscFrAtmCaPoolAvailBwTable.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.72.7.367.1.2 |
mscFrAtmCaPoolAdmitBwTableThis attribute indicates the total admitted bandwidth from each
bandwidth pool. Each value is the sum of the equivalent bit rates of
the admitted connections. SEQUENCE OF MscFrAtmCaPoolAdmitBwEntry .1.3.6.1.4.1.562.36.2.1.72.7.380 |
mscFrAtmCaPoolAdmitBwEntryAn entry in the mscFrAtmCaPoolAdmitBwTable. MscFrAtmCaPoolAdmitBwEntry .1.3.6.1.4.1.562.36.2.1.72.7.380.1 |
mscFrAtmCaPoolAdmitBwIndexThis variable represents the mscFrAtmCaPoolAdmitBwTable
specific index for the mscFrAtmCaPoolAdmitBwTable. Integer32 .1.3.6.1.4.1.562.36.2.1.72.7.380.1.1 |
mscFrAtmCaPoolAdmitBwValueThis variable represents an individual value for the
mscFrAtmCaPoolAdmitBwTable.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.72.7.380.1.2 |
mscFrAtmCidDataTableThis group contains the attribute for a component's Customer
Identifier (CID). Refer to the attribute description for a detailed
explanation of CIDs. SEQUENCE OF MscFrAtmCidDataEntry .1.3.6.1.4.1.562.36.2.1.72.10 |
mscFrAtmCidDataEntryAn entry in the mscFrAtmCidDataTable. MscFrAtmCidDataEntry .1.3.6.1.4.1.562.36.2.1.72.10.1 |
mscFrAtmCustomerIdentifierThis attribute holds the Customer Identifier (CID).
Every component has a CID. If a component has a cid attribute, the
component's CID is the provisioned value of that attribute;
otherwise the component inherits the CID of its parent. The top-
level component has a CID of 0.
Every operator session also has a CID, which is the CID
provisioned for the operator's user ID. An operator will see only the
stream data for components having a matching CID. Also, the
operator will be allowed to issue commands for only those
components which have a matching CID.
An operator CID of 0 is used to identify the Network Manager
(referred to as 'NetMan' in DPN). This CID matches the CID of
any component. Values 1 to 8191 inclusive (equivalent to 'basic
CIDs' in DPN) may be assigned to specific customers.rw Unsigned32 (0 | 1..8191) .1.3.6.1.4.1.562.36.2.1.72.10.1.1 |
mscFrAtmStateTableThis group contains the three OSI State attributes and the six OSI
Status attributes. The descriptions generically indicate what each
attribute implies about the component. Note that not all the values
and state combinations described here are supported by every
component which uses this group. For component-specific
information and the valid state combinations, refer to NTP 241-
7001-150, Passport Operations and Maintenance Guide. SEQUENCE OF MscFrAtmStateEntry .1.3.6.1.4.1.562.36.2.1.72.11 |
mscFrAtmStateEntryAn entry in the mscFrAtmStateTable. MscFrAtmStateEntry .1.3.6.1.4.1.562.36.2.1.72.11.1 |
mscFrAtmAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.72.11.1.1 |
mscFrAtmOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.72.11.1.2 |
mscFrAtmUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.72.11.1.3 |
mscFrAtmAvailabilityStatusIf supported by the component, this attribute indicates the OSI
Availability status of the component. Note that, even though it is
defined as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value inTest indicates that the resource is undergoing a test
procedure. If adminState is locked or shuttingDown, the normal
users are precluded from using the resource and controlStatus is
reservedForTest. Tests that do not exclude additional users can be
present in any operational or administrative state but the
reservedForTest condition should not be present.
The value failed indicates that the component has an internal fault
that prevents it from operating. The operationalState is disabled.
The value dependency indicates that the component cannot operate
because some other resource on which it depends is unavailable.
The operationalState is disabled.
The value powerOff indicates the resource requires power to be
applied and it is not powered on. The operationalState is disabled.
The value offLine indicates the resource requires a routine
operation (either manual, automatic, or both) to be performed to
place it on-line and make it available for use. The operationalState
is disabled.
The value offDuty indicates the resource is inactive in accordance
with a predetermined time schedule. In the absence of other
disabling conditions, the operationalState is enabled or disabled.
The value degraded indicates the service provided by the
component is degraded in some way, such as in speed or operating
capacity. However, the resource remains available for service. The
operationalState is enabled.
The value notInstalled indicates the resource is not present. The
operationalState is disabled.
The value logFull is not used.
Description of bits:
inTest(0)
failed(1)
powerOff(2)
offLine(3)
offDuty(4)
dependency(5)
degraded(6)
notInstalled(7)
logFull(8)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.72.11.1.4 |
mscFrAtmProceduralStatusIf supported by the component, this attribute indicates the OSI
Procedural status of the component. Note that, even though it is
defined as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value initializationRequired indicates (for a resource which
doesn't initialize autonomously) that initialization is required before
it can perform its normal functions, and this procedure has not been
initiated. The operationalState is disabled.
The value notInitialized indicates (for a resource which does
initialize autonomously) that initialization is required before it can
perform its normal functions, and this procedure has not been
initiated. The operationalState may be enabled or disabled.
The value initializing indicates that initialization has been initiated
but is not yet complete. The operationalState may be enabled or
disabled.
The value reporting indicates the resource has completed some
processing operation and is notifying the results. The
operationalState is enabled.
The value terminating indicates the component is in a termination
phase. If the resource doesn't reinitialize autonomously,
operationalState is disabled; otherwise it is enabled or disabled.
Description of bits:
initializationRequired(0)
notInitialized(1)
initializing(2)
reporting(3)
terminating(4)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.72.11.1.5 |
mscFrAtmControlStatusIf supported by the component, this attribute indicates the OSI
Control status of the component. Note that, even though it is defined
as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value subjectToTest indicates the resource is available but tests
may be conducted simultaneously at unpredictable times, which
may cause it to exhibit unusual characteristics.
The value partOfServicesLocked indicates that part of the service is
restricted from users of a resource. The adminState is unlocked.
The value reservedForTest indicates that the component is
administratively unavailable because it is undergoing a test
procedure. The adminState is locked.
The value suspended indicates that the service has been
administratively suspended.
Description of bits:
subjectToTest(0)
partOfServicesLocked(1)
reservedForTest(2)
suspended(3)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.72.11.1.6 |
mscFrAtmAlarmStatusIf supported by the component, this attribute indicates the OSI
Alarm status of the component. Note that, even though it is defined
as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value underRepair indicates the component is currently being
repaired. The operationalState is enabled or disabled.
The value critical indicates one or more critical alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value major indicates one or more major alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value minor indicates one or more minor alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value alarmOutstanding generically indicates that an alarm of
some severity is outstanding against the component.
Description of bits:
underRepair(0)
critical(1)
major(2)
minor(3)
alarmOutstanding(4)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.72.11.1.7 |
mscFrAtmStandbyStatusIf supported by the component, this attribute indicates the OSI
Standby status of the component.
The value notSet indicates that either the attribute is not supported
or that none of the status conditions described below are present.
Note that this is a non-standard value, used because the original
specification indicated this attribute was set-valued and thus, did not
provide a value to indicate that none of the other three are
applicable.
The value hotStandby indicates that the resource is not providing
service but will be immediately able to take over the role of the
resource to be backed up, without initialization activity, and
containing the same information as the resource to be backed up.
The value coldStandby indicates the resource is a backup for
another resource but will not be immediately able to take over the
role of the backed up resource and will require some initialization
activity.
The value providingService indicates that this component, as a
backup resource, is currently backing up another resource.ro Enumeration .1.3.6.1.4.1.562.36.2.1.72.11.1.8 |
mscFrAtmUnknownStatusThis attribute indicates the OSI Unknown status of the component.
The value false indicates that all of the other OSI State and Status
attribute values can be considered accurate.
The value true indicates that the actual state of the component is not
known for sure.ro Enumeration .1.3.6.1.4.1.562.36.2.1.72.11.1.9 |
mscFrAtmStatsTableFrUni/n Statistics
This group contains the statistics about the operational behavior of
the service at the interface level. SEQUENCE OF MscFrAtmStatsEntry .1.3.6.1.4.1.562.36.2.1.72.12 |
mscFrAtmStatsEntryAn entry in the mscFrAtmStatsTable. MscFrAtmStatsEntry .1.3.6.1.4.1.562.36.2.1.72.12.1 |
mscFrAtmLastUnknownDlciThis attribute identifies the most recent DLCI which user frames
were received on for which a DLCI has not been provisioned on the
port.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.72.12.1.1 |
mscFrAtmUnknownDlciFramesFromIfThis attribute contains a count of the number of frames received
from the interface with an unknown DLCI (DLCI which is not
provisioned). When the maximum is reached the count wraps to
zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.72.12.1.2 |
mscFrAtmInvalidHeaderFramesFromIfThis attribute counts the number of frames received from the
interface with an invalid header format. When the maximum is
reached the count wraps to zero.ro Counter32 .1.3.6.1.4.1.562.36.2.1.72.12.1.3 |
mscFrAtmIfEntryTableThis group contains the provisionable attributes for the ifEntry. SEQUENCE OF MscFrAtmIfEntryEntry .1.3.6.1.4.1.562.36.2.1.72.13 |
mscFrAtmIfEntryEntryAn entry in the mscFrAtmIfEntryTable. MscFrAtmIfEntryEntry .1.3.6.1.4.1.562.36.2.1.72.13.1 |
mscFrAtmIfAdminStatusThe desired state of the interface. The up state indicates the
interface is operational. The down state indicates the interface is not
operational. The testing state indicates that no operational packets
can be passed.rw Enumeration .1.3.6.1.4.1.562.36.2.1.72.13.1.1 |
mscFrAtmIfIndexThis is the index for the IfEntry. Its value is automatically initialized
during the provisioning process.ro InterfaceIndex .1.3.6.1.4.1.562.36.2.1.72.13.1.2 |
mscFrAtmOperStatusTableThis group includes the Operational Status attribute. This attribute
defines the current operational state of this component. SEQUENCE OF MscFrAtmOperStatusEntry .1.3.6.1.4.1.562.36.2.1.72.14 |
mscFrAtmOperStatusEntryAn entry in the mscFrAtmOperStatusTable. MscFrAtmOperStatusEntry .1.3.6.1.4.1.562.36.2.1.72.14.1 |
mscFrAtmSnmpOperStatusThe current state of the interface. The up state indicates the
interface is operational and capable of forwarding packets. The
down state indicates the interface is not operational, thus unable to
forward packets. testing state indicates that no operational packets
can be passed.ro Enumeration .1.3.6.1.4.1.562.36.2.1.72.14.1.1 |
mscFrAtmEmissionPriorityQsTableThis group contains the provisionable attribute to specifie the
number of Frame Relay egress emission priority queues to be used
on that Frame Relay Interface SEQUENCE OF MscFrAtmEmissionPriorityQsEntry .1.3.6.1.4.1.562.36.2.1.72.15 |
mscFrAtmEmissionPriorityQsEntryAn entry in the mscFrAtmEmissionPriorityQsTable. MscFrAtmEmissionPriorityQsEntry .1.3.6.1.4.1.562.36.2.1.72.15.1 |
mscFrAtmNumberOfEmissionQsThis attribute specifies the number of egress emission priority
queues that will be used for that Frame Relay interface. The
possible values of this attribute are 2 or 4:
For V.35, V.11, HSSI, E1, DS1, E3, DS3 or 8pDS1 the possible
values are: 2 (in which case they are hardware queues), or 4 (in
which case they are software queues).
For DS1C, E1C or DS3C the possible values are 2, 4 (in all cases
they are software queues).rw Unsigned32 (2 | 4) .1.3.6.1.4.1.562.36.2.1.72.15.1.1 |
mscFrAtmFrmToIfByQueueTableThis attribute counts the total number of frames transmitted to the
interface per egress emission priority queue since the component
has been activated. There is potientially a maximum of 4 emission
priority queues. The number of available egress queues varies
according to the value of the provisionable attribute
numberOfEmissionQs. Egress queue 0 has the lowest priority, while
egress queue 3 has the highest priority. The queue values
are only indicated when the numberOfEmissionQs is set to 4
queues. SEQUENCE OF MscFrAtmFrmToIfByQueueEntry .1.3.6.1.4.1.562.36.2.1.72.341 |
mscFrAtmFrmToIfByQueueEntryAn entry in the mscFrAtmFrmToIfByQueueTable. MscFrAtmFrmToIfByQueueEntry .1.3.6.1.4.1.562.36.2.1.72.341.1 |
mscFrAtmFrmToIfByQueueIndexThis variable represents the index for the mscFrAtmFrmToIfByQueueTable. Integer32 .1.3.6.1.4.1.562.36.2.1.72.341.1.1 |
mscFrAtmFrmToIfByQueueValueThis variable represents an individual value for the
mscFrAtmFrmToIfByQueueTable.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.72.341.1.2 |
mscFrAtmOctetToIfByQueueTableThis attribute counts the total number of octets transmitted from the
service to the interface per emission priority queue since the
component has been activated. There is potientially a maximum of
4 emission priority queues. The number of available egress queues
varies according to the value of the provisionable attribute
numberOfEmissionQs. Egress queue 0 has the lowest priority, while
egress queue 3 has the highest priority. SEQUENCE OF MscFrAtmOctetToIfByQueueEntry .1.3.6.1.4.1.562.36.2.1.72.342 |
mscFrAtmOctetToIfByQueueEntryAn entry in the mscFrAtmOctetToIfByQueueTable. MscFrAtmOctetToIfByQueueEntry .1.3.6.1.4.1.562.36.2.1.72.342.1 |
mscFrAtmOctetToIfByQueueIndexThis variable represents the index for the mscFrAtmOctetToIfByQueueTable. Integer32 .1.3.6.1.4.1.562.36.2.1.72.342.1.1 |
mscFrAtmOctetToIfByQueueValueThis variable represents an individual value for the
mscFrAtmOctetToIfByQueueTable.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.72.342.1.2 |
frameRelayAtmMIB OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.51 |
IMPORTS Unknown .1.3.6.1.4.1.562.36.2.2.51 |
frameRelayAtmGroup OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.51.1 |
frameRelayAtmGroupCA OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.51.1.1 |
frameRelayAtmGroupCA02 OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.51.1.1.3 |
frameRelayAtmGroupCA02A OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.51.1.1.3.2 |
frameRelayAtmCapabilities OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.51.3 |
frameRelayAtmCapabilitiesCA OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.51.3.1 |
frameRelayAtmCapabilitiesCA02 OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.51.3.1.3 |
frameRelayAtmCapabilitiesCA02A OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.51.3.1.3.2 |