Nortel-MsCarrier-MscPassport-ExternalTimingDS1MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for Nortel-MsCarrier-MscPassport-ExternalTimingDS1MIB.
39
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
39 total| Object Name |
|---|
mscLpEDS1 OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.12.28 |
mscLpEDS1RowStatusTableThis entry controls the addition and deletion of
mscLpEDS1 components. SEQUENCE OF MscLpEDS1RowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.28.1 |
mscLpEDS1RowStatusEntryA single entry in the table represents a single
mscLpEDS1 component. MscLpEDS1RowStatusEntry .1.3.6.1.4.1.562.36.2.1.12.28.1.1 |
mscLpEDS1RowStatusThis variable is used as the basis for SNMP naming of
mscLpEDS1 components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.28.1.1.1 |
mscLpEDS1ComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.28.1.1.2 |
mscLpEDS1StorageTypeThis variable represents the storage type value for the
mscLpEDS1 tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.12.28.1.1.4 |
mscLpEDS1IndexThis variable represents the index for the mscLpEDS1 tables. Integer32 .1.3.6.1.4.1.562.36.2.1.12.28.1.1.10 |
mscLpEDS1ProvTableThis group contains all of the provisioning data for an EDS1
component. SEQUENCE OF MscLpEDS1ProvEntry .1.3.6.1.4.1.562.36.2.1.12.28.10 |
mscLpEDS1ProvEntryAn entry in the mscLpEDS1ProvTable. MscLpEDS1ProvEntry .1.3.6.1.4.1.562.36.2.1.12.28.10.1 |
mscLpEDS1LineTypeThis attribute defines the framing format of the DS1 line. The
option d4 defines a framing pattern of 12 frames per multiframe.
The option esf defines a framing pattern of 24 frames per
multiframe. The default option esf is permitted.rw Enumeration .1.3.6.1.4.1.562.36.2.1.12.28.10.1.1 |
mscLpEDS1OperStatusTableThis group includes the Operational Status attribute. This attribute
defines the current operational state of this component. SEQUENCE OF MscLpEDS1OperStatusEntry .1.3.6.1.4.1.562.36.2.1.12.28.14 |
mscLpEDS1OperStatusEntryAn entry in the mscLpEDS1OperStatusTable. MscLpEDS1OperStatusEntry .1.3.6.1.4.1.562.36.2.1.12.28.14.1 |
mscLpEDS1SnmpOperStatusThe current state of the interface. The up state indicates the
interface is operational and capable of forwarding packets. The
down state indicates the interface is not operational, thus unable to
forward packets. testing state indicates that no operational packets
can be passed.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.28.14.1.1 |
mscLpEDS1StateTableThis group contains the three OSI State attributes and the six OSI
Status attributes. The descriptions generically indicate what each
attribute implies about the component. Note that not all the values
and state combinations described here are supported by every
component which uses this group. For component-specific
information and the valid state combinations, refer to NTP 241-
7001-150, Passport Operations and Maintenance Guide. SEQUENCE OF MscLpEDS1StateEntry .1.3.6.1.4.1.562.36.2.1.12.28.15 |
mscLpEDS1StateEntryAn entry in the mscLpEDS1StateTable. MscLpEDS1StateEntry .1.3.6.1.4.1.562.36.2.1.12.28.15.1 |
mscLpEDS1AdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.28.15.1.1 |
mscLpEDS1OperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.28.15.1.2 |
mscLpEDS1UsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.28.15.1.3 |
mscLpEDS1AvailabilityStatusIf supported by the component, this attribute indicates the OSI
Availability status of the component. Note that, even though it is
defined as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value inTest indicates that the resource is undergoing a test
procedure. If adminState is locked or shuttingDown, the normal
users are precluded from using the resource and controlStatus is
reservedForTest. Tests that do not exclude additional users can be
present in any operational or administrative state but the
reservedForTest condition should not be present.
The value failed indicates that the component has an internal fault
that prevents it from operating. The operationalState is disabled.
The value dependency indicates that the component cannot operate
because some other resource on which it depends is unavailable.
The operationalState is disabled.
The value powerOff indicates the resource requires power to be
applied and it is not powered on. The operationalState is disabled.
The value offLine indicates the resource requires a routine
operation (either manual, automatic, or both) to be performed to
place it on-line and make it available for use. The operationalState
is disabled.
The value offDuty indicates the resource is inactive in accordance
with a predetermined time schedule. In the absence of other
disabling conditions, the operationalState is enabled or disabled.
The value degraded indicates the service provided by the
component is degraded in some way, such as in speed or operating
capacity. However, the resource remains available for service. The
operationalState is enabled.
The value notInstalled indicates the resource is not present. The
operationalState is disabled.
The value logFull is not used.
Description of bits:
inTest(0)
failed(1)
powerOff(2)
offLine(3)
offDuty(4)
dependency(5)
degraded(6)
notInstalled(7)
logFull(8)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.12.28.15.1.4 |
mscLpEDS1ProceduralStatusIf supported by the component, this attribute indicates the OSI
Procedural status of the component. Note that, even though it is
defined as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value initializationRequired indicates (for a resource which
doesn't initialize autonomously) that initialization is required before
it can perform its normal functions, and this procedure has not been
initiated. The operationalState is disabled.
The value notInitialized indicates (for a resource which does
initialize autonomously) that initialization is required before it can
perform its normal functions, and this procedure has not been
initiated. The operationalState may be enabled or disabled.
The value initializing indicates that initialization has been initiated
but is not yet complete. The operationalState may be enabled or
disabled.
The value reporting indicates the resource has completed some
processing operation and is notifying the results. The
operationalState is enabled.
The value terminating indicates the component is in a termination
phase. If the resource doesn't reinitialize autonomously,
operationalState is disabled; otherwise it is enabled or disabled.
Description of bits:
initializationRequired(0)
notInitialized(1)
initializing(2)
reporting(3)
terminating(4)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.12.28.15.1.5 |
mscLpEDS1ControlStatusIf supported by the component, this attribute indicates the OSI
Control status of the component. Note that, even though it is defined
as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value subjectToTest indicates the resource is available but tests
may be conducted simultaneously at unpredictable times, which
may cause it to exhibit unusual characteristics.
The value partOfServicesLocked indicates that part of the service is
restricted from users of a resource. The adminState is unlocked.
The value reservedForTest indicates that the component is
administratively unavailable because it is undergoing a test
procedure. The adminState is locked.
The value suspended indicates that the service has been
administratively suspended.
Description of bits:
subjectToTest(0)
partOfServicesLocked(1)
reservedForTest(2)
suspended(3)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.12.28.15.1.6 |
mscLpEDS1AlarmStatusIf supported by the component, this attribute indicates the OSI
Alarm status of the component. Note that, even though it is defined
as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value underRepair indicates the component is currently being
repaired. The operationalState is enabled or disabled.
The value critical indicates one or more critical alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value major indicates one or more major alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value minor indicates one or more minor alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value alarmOutstanding generically indicates that an alarm of
some severity is outstanding against the component.
Description of bits:
underRepair(0)
critical(1)
major(2)
minor(3)
alarmOutstanding(4)ro OCTET STRING .1.3.6.1.4.1.562.36.2.1.12.28.15.1.7 |
mscLpEDS1StandbyStatusIf supported by the component, this attribute indicates the OSI
Standby status of the component.
The value notSet indicates that either the attribute is not supported
or that none of the status conditions described below are present.
Note that this is a non-standard value, used because the original
specification indicated this attribute was set-valued and thus, did not
provide a value to indicate that none of the other three are
applicable.
The value hotStandby indicates that the resource is not providing
service but will be immediately able to take over the role of the
resource to be backed up, without initialization activity, and
containing the same information as the resource to be backed up.
The value coldStandby indicates the resource is a backup for
another resource but will not be immediately able to take over the
role of the backed up resource and will require some initialization
activity.
The value providingService indicates that this component, as a
backup resource, is currently backing up another resource.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.28.15.1.8 |
mscLpEDS1UnknownStatusThis attribute indicates the OSI Unknown status of the component.
The value false indicates that all of the other OSI State and Status
attribute values can be considered accurate.
The value true indicates that the actual state of the component is not
known for sure.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.28.15.1.9 |
mscLpEDS1OperTableThis group contains the common operational data for EE1 and
EDS1 components. SEQUENCE OF MscLpEDS1OperEntry .1.3.6.1.4.1.562.36.2.1.12.28.16 |
mscLpEDS1OperEntryAn entry in the mscLpEDS1OperTable. MscLpEDS1OperEntry .1.3.6.1.4.1.562.36.2.1.12.28.16.1 |
mscLpEDS1LosAlarmThis attribute indicates whether a LOS (Loss of Signal) alarm state
has been entered. A LOS alarm is declared after LOS defects have
been observed and accumulated for a period of 2 seconds +/- 0.5
second . A LOS defect is detected upon observing all zeros for 150
ms . If the LOS defects are intermittently occurring, the LOS defect
accumulator is decremented at a rate of 1/10 of the incrementing
rate (alarm integration ratio of 1/10), with all measurements based
on a 200 ms polling cycle.
The port goes into an operational state of disabled until the LOS
alarm state is cleared. The LOS alarm state is cleared when LOS
defects are absent for 10 seconds +/- 0.5 second.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.28.16.1.1 |
mscLpEDS1LofAlarmThis attribute indicates whether a LOF (Loss of Frame) alarm state
has been entered. The LOF alarm state is entered when LOF defects
(for DS1: 2 out of 5 framing bits in error; for E1: 3 consecutive
frame alignment patterns in error) have been detected for 3 seconds
+/- 0.5 second . If the LOF defects are intermittently occurring, the
LOF defect accumulator is decremented at a rate of 1/10 of the
incrementing rate (alarm integration ratio of 1/10), with all
measurements based on a 200 ms polling cycle.
The port goes into an operational state of disabled until the LOF
alarm state is cleared. The condition is cleared when framing has
been achieved for 10 seconds +/- 0.5 second.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.28.16.1.2 |
mscLpEDS1RxAisAlarmThis attribute indicates whether an AIS (Alarm Indication Signal)
alarm has been entered. The AIS Alarm state is entered when AIS
defects have been observed and accumulated for 2.5 seconds +/- 0.5
second. An AIS defect is detected after having received less than 3
zeros in a 2048 bit period. If the AIS defects are intermittently
occurring, the AIS defect accumulator is decremented at a rate of 1/
10 of the incrementing rate (alarm integration ratio of 1/10), with all
measurement based on a 200 ms polling cycle. The port goes into
an operational state of disabled for the duration of an AIS alarm
state. The AIS alarm state is cleared when AIS defects are absent
for 10 seconds +/- 0.5 second.ro Enumeration .1.3.6.1.4.1.562.36.2.1.12.28.16.1.3 |
externalTimingDS1MIB OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.151 |
IMPORTS Unknown .1.3.6.1.4.1.562.36.2.2.151 |
externalTimingDS1Group OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.151.1 |
externalTimingDS1GroupCA OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.151.1.1 |
externalTimingDS1GroupCA02 OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.151.1.1.3 |
externalTimingDS1GroupCA02A OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.151.1.1.3.2 |
externalTimingDS1Capabilities OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.151.3 |
externalTimingDS1CapabilitiesCA OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.151.3.1 |
externalTimingDS1CapabilitiesCA02 OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.151.3.1.3 |
externalTimingDS1CapabilitiesCA02A OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.151.3.1.3.2 |