Nortel-MsCarrier-MscPassport-BgpMIB
AI MIB Summary
Standard SNMP MIB module defining data structures for Nortel-MsCarrier-MscPassport-BgpMIB.
275
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
275 total| Object Name |
|---|
mscVrIpBgp OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.100.6.21 |
mscVrIpBgpRowStatusTableThis entry controls the addition and deletion of
mscVrIpBgp components. SEQUENCE OF MscVrIpBgpRowStatusEntry .1.3.6.1.4.1.562.36.2.1.100.6.21.1 |
mscVrIpBgpRowStatusEntryA single entry in the table represents a single
mscVrIpBgp component. MscVrIpBgpRowStatusEntry .1.3.6.1.4.1.562.36.2.1.100.6.21.1.1 |
mscVrIpBgpRowStatusThis variable is used as the basis for SNMP naming of
mscVrIpBgp components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.100.6.21.1.1.1 |
mscVrIpBgpComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.100.6.21.1.1.2 |
mscVrIpBgpStorageTypeThis variable represents the storage type value for the
mscVrIpBgp tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.100.6.21.1.1.4 |
mscVrIpBgpIndexThis variable represents the index for the mscVrIpBgp tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.100.6.21.1.1.10 |
mscVrIpBgpPeer OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.100.6.21.2 |
mscVrIpBgpPeerRowStatusTableThis entry controls the addition and deletion of
mscVrIpBgpPeer components. SEQUENCE OF MscVrIpBgpPeerRowStatusEntry .1.3.6.1.4.1.562.36.2.1.100.6.21.2.1 |
mscVrIpBgpPeerRowStatusEntryA single entry in the table represents a single
mscVrIpBgpPeer component. MscVrIpBgpPeerRowStatusEntry .1.3.6.1.4.1.562.36.2.1.100.6.21.2.1.1 |
mscVrIpBgpPeerRowStatusThis variable is used as the basis for SNMP naming of
mscVrIpBgpPeer components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.100.6.21.2.1.1.1 |
mscVrIpBgpPeerComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.100.6.21.2.1.1.2 |
mscVrIpBgpPeerStorageTypeThis variable represents the storage type value for the
mscVrIpBgpPeer tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.100.6.21.2.1.1.4 |
mscVrIpBgpPeerPeerAddressIndexThis variable represents the index for the mscVrIpBgpPeer tables. IpAddress .1.3.6.1.4.1.562.36.2.1.100.6.21.2.1.1.10 |
mscVrIpBgpPeerProvTableThis group contains the provisionable attributes for this
BGP Peer component SEQUENCE OF MscVrIpBgpPeerProvEntry .1.3.6.1.4.1.562.36.2.1.100.6.21.2.10 |
mscVrIpBgpPeerProvEntryAn entry in the mscVrIpBgpPeerProvTable. MscVrIpBgpPeerProvEntry .1.3.6.1.4.1.562.36.2.1.100.6.21.2.10.1 |
mscVrIpBgpPeerPeerAsThis attribute specifies the autonomous system identifier of this
BGP Peer component. It will be used to verify the autonomous
system identifier learned from the peer through the OPEN message.
The peer connection will be rejected and a NOTIFICATION
message will be sent to the peer if these two numbers don't match.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.100.6.21.2.10.1.1 |
mscVrIpBgpPeerLocalAddressConfiguredThis attribute specifies the local IP address configured for this Bgp
Peer connection. If this attribute is 0.0.0.0, TCP will choose a local
IP interface based on the remote IP address of this peer connection
and the IP forwarding table. The value chosen is stored in the
localAddressUsed attribute under the same Peer component.rw IpAddress .1.3.6.1.4.1.562.36.2.1.100.6.21.2.10.1.2 |
mscVrIpBgpPeerKeepAliveConfiguredThis attribute specifies the configured interval in seconds, between
BGP KEEPALIVE message retransmissions. It is used to establish
the ratio between keepalive interval and hold time. If this attribute is
zero, then the holdTimeConfigured attribute should also be zero,
which means that periodic KEEPALIVE messages will not be sent.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.100.6.21.2.10.1.3 |
mscVrIpBgpPeerHoldTimeConfiguredThis attribute specifies the maximum time in seconds, that may
elapse without receiving a KEEPALIVE or UPDATE message
before the connection is considered down. The hold time must be
either zero or at least three seconds. If this attribute is zero, then the
keepAliveConfigured attribute should also be zero, which means
that periodic KEEPALIVE messages will not be sent.rw Unsigned32 (0 | 3..65535) .1.3.6.1.4.1.562.36.2.1.100.6.21.2.10.1.4 |
mscVrIpBgpPeerConnectRetryTimeThis attribute specifies the time interval in seconds for the
ConnectRetry timer. It is the minimum amount of time that must
elapse between successive TCP connection retries for establishing
BGP peer connection.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.100.6.21.2.10.1.5 |
mscVrIpBgpPeerMinAsOrigTimeThis attribute specifies the time interval in seconds for the
MinAsOriginationInterval timer. It is the minimum amount of time
that must elapse between updates that advertise a change to a route
within the local autonomous system to neighboring autonomous
systems.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.100.6.21.2.10.1.6 |
mscVrIpBgpPeerMinRouteAdvTimeThis attribute specifies the time interval in seconds for the
MinRouteAdvertisementInterval timer. Feasible routes received
from peers in other autonomous systems may only be re-advertised
to peers in other autonomous systems at a rate no greater than
MinRouteAdvertisementInterval.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.100.6.21.2.10.1.7 |
mscVrIpBgpPeerDefaultInAggMedThis attribute specifies this Bgp Peer component instance's metric
for generating a dynamic default route whenever this external bgp
peer got established. It is used to prioritize between the dynamic
default routes generated by Passport Bgp speakers. If this attribute
is not set, Bgp will not generate a dynamic default route. If this
attribute is set, Bgp will automatically generate a dynamic default
route when the connection established.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.100.6.21.2.10.1.8 |
mscVrIpBgpPeerIsRouteReflectorClientThis attribute specifies whether the peer is a client peer or non-
client peer of this Bgp instance. The attribute is only meaningful if
attribute routeReflector of Bgp is true.rw Enumeration .1.3.6.1.4.1.562.36.2.1.100.6.21.2.10.1.9 |
mscVrIpBgpPeerRemovePrivateAsThis attribute specifies the treatment of the AS_PATH path attribute
in routes sent to the peer. If this attribute is enabled, then BGP will
remove private AS numbers from the AS_PATH. This attribute is
meaningful only for external peers.rw Enumeration .1.3.6.1.4.1.562.36.2.1.100.6.21.2.10.1.10 |
mscVrIpBgpPeerStateTableThis group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. SEQUENCE OF MscVrIpBgpPeerStateEntry .1.3.6.1.4.1.562.36.2.1.100.6.21.2.11 |
mscVrIpBgpPeerStateEntryAn entry in the mscVrIpBgpPeerStateTable. MscVrIpBgpPeerStateEntry .1.3.6.1.4.1.562.36.2.1.100.6.21.2.11.1 |
mscVrIpBgpPeerAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.100.6.21.2.11.1.1 |
mscVrIpBgpPeerOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.ro Enumeration .1.3.6.1.4.1.562.36.2.1.100.6.21.2.11.1.2 |
mscVrIpBgpPeerUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.ro Enumeration .1.3.6.1.4.1.562.36.2.1.100.6.21.2.11.1.3 |
mscVrIpBgpPeerOperTableThis group contains the operational attributes for the Peer
component. SEQUENCE OF MscVrIpBgpPeerOperEntry .1.3.6.1.4.1.562.36.2.1.100.6.21.2.12 |
mscVrIpBgpPeerOperEntryAn entry in the mscVrIpBgpPeerOperTable. MscVrIpBgpPeerOperEntry .1.3.6.1.4.1.562.36.2.1.100.6.21.2.12.1 |
mscVrIpBgpPeerConnectionStateThis attribute indicates the current state of this BGP peer
connection. The meaning of each state is as follows:
idle - it is the initial state of the BGP peer connection. Error events
will also cause BGP peer connection to transit to the idle state.
connect - BGP has initiated a TCP connection request to this peer,
and waiting for reply from that peer.
active - BGP is not initiating a TCP connection request to this peer,
because TCP connection failed and is waiting for connection retry
time-out.
openSent - a TCP connection to this peer has been established, but
the OPEN message has not been successfully exchanged.
openConfirm - OPEN message has been successfully exchanged
with this peer, but the first KEEPALIVE message has not been
received from that peer.
established - the first KEEPALIVE message has been received
from this peer, which means this BGP peer connection has been
established.
See RFC 1771 for a detailed description of BGP state transitions.ro Enumeration .1.3.6.1.4.1.562.36.2.1.100.6.21.2.12.1.3 |
mscVrIpBgpPeerBgpIdentifierThis attribute indicates the BGP Identifier of this Bgp Peer
component. It is learned from the peer through the OPEN message.ro IpAddress .1.3.6.1.4.1.562.36.2.1.100.6.21.2.12.1.4 |
mscVrIpBgpPeerVersionNegotiatedThis attribute indicates the BGP version number negotiated with
this peer through the OPEN message. Currently, only BGP version
4 is supported. BGP will reject the peer connection if our peer
proposes a BGP version other than 4.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.100.6.21.2.12.1.5 |
mscVrIpBgpPeerHoldTimeNegotiatedThis attribute indicates the maximum time in seconds, that may
elapse without receiving a KEEPALIVE or UPDATE message
before the connection is considered down. This is the negotiated
value with peer through the OPEN message. The hold time must be
either zero or at least three seconds. If the negotiated hold time is
zero, then periodic KEEPALIVE messages are not expected from
the peer.ro Unsigned32 (0 | 3..65535) .1.3.6.1.4.1.562.36.2.1.100.6.21.2.12.1.6 |
mscVrIpBgpPeerKeepAliveNegotiatedThis attribute indicates the interval in seconds, between BGP
KEEPALIVE message retransmissions. This keepalive interval will
have the same ratio to the hold time negotiated with the peer as that
of the locally configured keepalive and hold time. This attribute will
be zero if the holdTimeNegotiated attribute is zero, which means
periodic KEEPALIVE messages will not be sent.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.100.6.21.2.12.1.7 |
mscVrIpBgpPeerLocalAddressUsedThis attribute indicates the local IP address used for this BGP peer
connection. If the localAddressConfigured attribute is non-zero, its
value will be used. Otherwise, the local address will be assigned by
TCP based on the remote IP address of this peer connection and the
IP forwarding table.ro IpAddress .1.3.6.1.4.1.562.36.2.1.100.6.21.2.12.1.8 |
mscVrIpBgpPeerLocalPortThis attribute indicates the local TCP port for the connection
between the BGP peers.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.100.6.21.2.12.1.9 |
mscVrIpBgpPeerRemotePortThis attribute indicates the remote TCP port for the connection
between the BGP peers.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.100.6.21.2.12.1.10 |
mscVrIpBgpPeerLastErrorThis attribute indicates the last error code and subcode seen by this
Bgp component instance on this peer connection. The first byte of
this two byte OCTET STRING contains the error code, and the
second byte contains the subcode. A value of zero means that no
error has occurred. Check RFC 1771 for mappings of error codes
and error subcodes.ro HexString .1.3.6.1.4.1.562.36.2.1.100.6.21.2.12.1.11 |
mscVrIpBgpPeerConnectionEstablishedTimeThis attribute indicates how long since this Peer component's last
transition to or from the established state. It is set to zero when the
Peer component is activated.
DESCRIPTIONro Gauge32 .1.3.6.1.4.1.562.36.2.1.100.6.21.2.12.1.12 |
mscVrIpBgpPeerConnectionEstablishedTransitionsThis attribute counts the total number of times the BGP connection
state transitioned into the established state.ro Counter32 .1.3.6.1.4.1.562.36.2.1.100.6.21.2.12.1.13 |
mscVrIpBgpPeerInUpdateElapsedTimeThis attribute indicates the elapsed time in seconds since the last
BGP UPDATE message was received from the peer. Each time
inUpdates attribute is incremented, the value of this attribute is set
to zero.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.100.6.21.2.12.1.14 |
mscVrIpBgpPeerInMsgsThis attribute counts the number of BGP messages received without
error from the BGP peer. This counter will wrap to zero once the
value exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.100.6.21.2.12.1.15 |
mscVrIpBgpPeerInUpdatesThis attribute counts the number of BGP UPDATE messages
received on this peer connection. This counter will wrap to zero
once the value exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.100.6.21.2.12.1.16 |
mscVrIpBgpPeerInErrorsThis attribute counts the number of messages received from this
BGP peer that proved to be in error. This counter will wrap to zero
once the value exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.100.6.21.2.12.1.17 |
mscVrIpBgpPeerInErrorMsgsThis attribute counts the number of BGP NOTIFICATION
messages received from this BGP peer. This counter will wrap to
zero once the value exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.100.6.21.2.12.1.18 |
mscVrIpBgpPeerOutMsgsThis attribute counts the number of locally generated BGP
messages sent to this BGP peer. It does not include discarded
messages. This counter will wrap to zero once the value exceeds the
maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.100.6.21.2.12.1.19 |
mscVrIpBgpPeerOutUpdatesThis attribute counts the number of BGP UPDATE messages sent to
this peer. This counter will wrap to zero once the value exceeds the
maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.100.6.21.2.12.1.20 |
mscVrIpBgpPeerOutDiscardsThis attribute counts the number of locally generated BGP
messages not sent to this BGP peer due to resource limitations
within a BGP entity. This counter will wrap to zero once the value
exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.100.6.21.2.12.1.21 |
mscVrIpBgpPeerOutErrorMsgsThis attribute counts the number of BGP NOTIFICATION
messages sent to this BGP peer. This counter will wrap to zero once
the value exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.100.6.21.2.12.1.22 |
mscVrIpBgpPeerInRoutesThis attribute indicates the number of routes received from this
BGP peer.ro Counter32 .1.3.6.1.4.1.562.36.2.1.100.6.21.2.12.1.23 |
mscVrIpBgpImport OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.100.6.21.3 |
mscVrIpBgpImportRowStatusTableThis entry controls the addition and deletion of
mscVrIpBgpImport components. SEQUENCE OF MscVrIpBgpImportRowStatusEntry .1.3.6.1.4.1.562.36.2.1.100.6.21.3.1 |
mscVrIpBgpImportRowStatusEntryA single entry in the table represents a single
mscVrIpBgpImport component. MscVrIpBgpImportRowStatusEntry .1.3.6.1.4.1.562.36.2.1.100.6.21.3.1.1 |
mscVrIpBgpImportRowStatusThis variable is used as the basis for SNMP naming of
mscVrIpBgpImport components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.100.6.21.3.1.1.1 |
mscVrIpBgpImportComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.100.6.21.3.1.1.2 |
mscVrIpBgpImportStorageTypeThis variable represents the storage type value for the
mscVrIpBgpImport tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.100.6.21.3.1.1.4 |
mscVrIpBgpImportIndexThis variable represents the index for the mscVrIpBgpImport tables. Integer32 .1.3.6.1.4.1.562.36.2.1.100.6.21.3.1.1.10 |
mscVrIpBgpImportNet OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.100.6.21.3.2 |
mscVrIpBgpImportNetRowStatusTableThis entry controls the addition and deletion of
mscVrIpBgpImportNet components. SEQUENCE OF MscVrIpBgpImportNetRowStatusEntry .1.3.6.1.4.1.562.36.2.1.100.6.21.3.2.1 |
mscVrIpBgpImportNetRowStatusEntryA single entry in the table represents a single
mscVrIpBgpImportNet component. MscVrIpBgpImportNetRowStatusEntry .1.3.6.1.4.1.562.36.2.1.100.6.21.3.2.1.1 |
mscVrIpBgpImportNetRowStatusThis variable is used as the basis for SNMP naming of
mscVrIpBgpImportNet components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.100.6.21.3.2.1.1.1 |
mscVrIpBgpImportNetComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.100.6.21.3.2.1.1.2 |
mscVrIpBgpImportNetStorageTypeThis variable represents the storage type value for the
mscVrIpBgpImportNet tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.100.6.21.3.2.1.1.4 |
mscVrIpBgpImportNetIndexThis variable represents the index for the mscVrIpBgpImportNet tables. Integer32 .1.3.6.1.4.1.562.36.2.1.100.6.21.3.2.1.1.10 |
mscVrIpBgpImportNetProvTableThis group contains the set of provisionable attributes for the
Network component. SEQUENCE OF MscVrIpBgpImportNetProvEntry .1.3.6.1.4.1.562.36.2.1.100.6.21.3.2.10 |
mscVrIpBgpImportNetProvEntryAn entry in the mscVrIpBgpImportNetProvTable. MscVrIpBgpImportNetProvEntry .1.3.6.1.4.1.562.36.2.1.100.6.21.3.2.10.1 |
mscVrIpBgpImportNetPrefixThis attribute specifies the network prefix whose length is
determined by the length attribute under the same Network
component.rw IpAddress .1.3.6.1.4.1.562.36.2.1.100.6.21.3.2.10.1.1 |
mscVrIpBgpImportNetLengthThis attribute specifies the length of the network prefix.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.100.6.21.3.2.10.1.2 |
mscVrIpBgpImportProvTableThis group contains all the provisionable attributes for the Import
component. SEQUENCE OF MscVrIpBgpImportProvEntry .1.3.6.1.4.1.562.36.2.1.100.6.21.3.10 |
mscVrIpBgpImportProvEntryAn entry in the mscVrIpBgpImportProvTable. MscVrIpBgpImportProvEntry .1.3.6.1.4.1.562.36.2.1.100.6.21.3.10.1 |
mscVrIpBgpImportPeerAsThis key attribute specifies the autonomous system number of the
peer from which the routes are learned. A value of 0 for this
attribute means that peer AS number will match any AS number.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.100.6.21.3.10.1.1 |
mscVrIpBgpImportPeerIpAddressThis key attribute specifies the IP address of the peer from which
the routes are learned. A value of 0.0.0.0 for this attribute means
that peer IP address will match any IP address.rw IpAddress .1.3.6.1.4.1.562.36.2.1.100.6.21.3.10.1.2 |
mscVrIpBgpImportOriginAsThis key attribute specifies the autonomous system number where
the routes were originated. A value of 0 for this attribute means
origin AS number will match any AS number.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.100.6.21.3.10.1.3 |
mscVrIpBgpImportOriginProtocolThis key attribute specifies the protocols that originated the routes.
A value of incomplete for this attribute means this information is
not available.rw Enumeration .1.3.6.1.4.1.562.36.2.1.100.6.21.3.10.1.4 |
mscVrIpBgpImportUsageFlagThis attribute specifies whether BGP will use or ignore information
in received update if it meets criteria specified by the key attributes
of this component.rw Enumeration .1.3.6.1.4.1.562.36.2.1.100.6.21.3.10.1.5 |
mscVrIpBgpImportLocalPreferenceThis attribute specifies this Bgp component instance's degree of
preference for those routes that match the criteria of this import
policy. A higher value indicates a more preferred route. A value of 0
for this attribute means that the default local preference value
provisioned under the Bgp component should be used.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.100.6.21.3.10.1.6 |
mscVrIpBgpImportPreferredOverThis attribute indicates the preference of the external BGP route
with the OSPF internal route. overIntOspf means that the external
BGP route is chosen over OSPF internal route, while underIntOspf
means that the OSPF internal route is chosen over the external BGP
route. The default preference is set to underIntOspf.rw Enumeration .1.3.6.1.4.1.562.36.2.1.100.6.21.3.10.1.7 |
mscVrIpBgpImportAsPathExpressionThis key attribute allows the user to enter a regular expression to
match the import AS Path Attribute of the received update message.
Note: the AS Path Attribute lists the ASs in reverse traversal order.
The syntax of the regular expression is a subset of the RFC 2280.
The basic syntax of a regular expression is a list of AS number
separated by a space which making up a AS path.
The following characters has the special meaning:
'.' - Matches any AS number.
'^n' - Matches the first AS item (n) in the AS Path Attribute,
or in order words, matches the last AS (n) traversed in
the AS path.
'n$' - Matches the last AS item (n) in the AS Path Attribute,
or in order words, matches the first AS (n) traversed in
the AS path.
'[n1 ... n2]' - Matches any AS number that appeared in the set n1 ...
n2.
'n1 - n2' - Matches any AS number between the range of n1 and
n2.
'()' - is supported to change the order of evaluation.
'n*' - Matches 0 or more occurrences of n, where n can be a
set, range or AS number.
'n+' - Matches 1 or more occurrences of n, where n can be a
set, range or AS number.
'n?' - Matches 0 or 1 occurrences of n, where n can be a AS
set, range or number.
The following logical operators are evaluated in decending order:
'NOT' - Given a regular expression x, NOT x matches the AS
number pattern that is not matched by x.
'AND' - Given two regular expressions x and y, x AND y
matches the intersection of the AS path that are
matched by x and those are matched by y.
'OR' - Given two regular expressions x and y, x OR y
matches the union of the AS path that are matched by x
and those are matched by y.
For example: The AS path '5 4 3 2 1', where 1 is the origin AS,
would be match by any one of the following regular expressions:
1$,
^5,
4 3,
5 3 - 4*,
5 [4 3 2] not10 2 1,
not (6 7 8 9 10) and 5 4 .* 1
Empty regular expression implies a match on all AS path.rw AsciiString .1.3.6.1.4.1.562.36.2.1.100.6.21.3.10.1.8 |
mscVrIpBgpImportCommunityExpressionThis key attribute allows the user to enter a regular expression to
match the import Community Attribute of the received update
message. The syntax of the regular expression is a subset of the
RFC 2280.
The basic syntax of a regular expression is a list of Community
number seperated by a space which making up a Community
attribute.
The following characters has the special meaning:
'[n1 ... n2]' - Matches any Community number that appeared in the
set n1 ... n2.
'n1 - n2' - Matches any Community number between the range of
n1 and n2.
'()' - is supported to change the order of evaluation.
'n*' - Matches 0 or more occurrences of n, where n can be a
set, range or Community number.
'n+' - Matches 1 or more occurrences of n, where n can be a
set, range or Community number.
'n?' - Matches 0 or 1 occurrences of n, where n can be a
set, range or number.
The following logical operators are evaluated in decending order:
'NOT' - Given a regular expression x, NOT x matches the
Community attribute that is not matched by x.
'AND' - Given two regular expressions x and y, x AND y
matches the intersection of the Community attribute that
are matched by x and those are matched by y.
'OR' - Given two regular expressions x and y, x OR y
matches the union of the Community attribute that are
matched by x and those are matched by y.
For example: The Community path '1 2 3 4 5' would be match by
any one of the following regular expression:
1,
5,
4 3,
2 3 - 4*,
1 [3 4 2]+,
not (6 7 8 9 10) and 1 2
Empty regular expression implies a match on all Community path.rw AsciiString .1.3.6.1.4.1.562.36.2.1.100.6.21.3.10.1.9 |
mscVrIpBgpImportExpressPreferenceThis attribute specifies the relative preference of the policy which
use the keys expressAsPath and expressCommunity. This attribute is
ignored if attributes expressAsPath and expressCommunity are both
empty. This attribute is used to break the tie when two import
policies' expression attributes match a specific AS Path or
Community. A higher value indicates a more preferred policy.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.100.6.21.3.10.1.10 |
mscVrIpBgpImportAppendCommunityThis attribute indicates which community number this Import policy
will send along with the Path Attribute. Refer to RFC 1997 for the
detailed description of how this attribute may be used to pass
additional information to BGP peers. If the value is set to 0, no
community is appended to the Community attribute.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.100.6.21.3.10.1.11 |
mscVrIpBgpExport OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.100.6.21.4 |
mscVrIpBgpExportRowStatusTableThis entry controls the addition and deletion of
mscVrIpBgpExport components. SEQUENCE OF MscVrIpBgpExportRowStatusEntry .1.3.6.1.4.1.562.36.2.1.100.6.21.4.1 |
mscVrIpBgpExportRowStatusEntryA single entry in the table represents a single
mscVrIpBgpExport component. MscVrIpBgpExportRowStatusEntry .1.3.6.1.4.1.562.36.2.1.100.6.21.4.1.1 |
mscVrIpBgpExportRowStatusThis variable is used as the basis for SNMP naming of
mscVrIpBgpExport components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.100.6.21.4.1.1.1 |
mscVrIpBgpExportComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.100.6.21.4.1.1.2 |
mscVrIpBgpExportStorageTypeThis variable represents the storage type value for the
mscVrIpBgpExport tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.100.6.21.4.1.1.4 |
mscVrIpBgpExportIndexThis variable represents the index for the mscVrIpBgpExport tables. Integer32 .1.3.6.1.4.1.562.36.2.1.100.6.21.4.1.1.10 |
mscVrIpBgpExportNet OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.100.6.21.4.2 |
mscVrIpBgpExportNetRowStatusTableThis entry controls the addition and deletion of
mscVrIpBgpExportNet components. SEQUENCE OF MscVrIpBgpExportNetRowStatusEntry .1.3.6.1.4.1.562.36.2.1.100.6.21.4.2.1 |
mscVrIpBgpExportNetRowStatusEntryA single entry in the table represents a single
mscVrIpBgpExportNet component. MscVrIpBgpExportNetRowStatusEntry .1.3.6.1.4.1.562.36.2.1.100.6.21.4.2.1.1 |
mscVrIpBgpExportNetRowStatusThis variable is used as the basis for SNMP naming of
mscVrIpBgpExportNet components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.100.6.21.4.2.1.1.1 |
mscVrIpBgpExportNetComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.100.6.21.4.2.1.1.2 |
mscVrIpBgpExportNetStorageTypeThis variable represents the storage type value for the
mscVrIpBgpExportNet tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.100.6.21.4.2.1.1.4 |
mscVrIpBgpExportNetIndexThis variable represents the index for the mscVrIpBgpExportNet tables. Integer32 .1.3.6.1.4.1.562.36.2.1.100.6.21.4.2.1.1.10 |
mscVrIpBgpExportNetProvTableThis group contains the set of provisionable attributes for the
Network component. SEQUENCE OF MscVrIpBgpExportNetProvEntry .1.3.6.1.4.1.562.36.2.1.100.6.21.4.2.10 |
mscVrIpBgpExportNetProvEntryAn entry in the mscVrIpBgpExportNetProvTable. MscVrIpBgpExportNetProvEntry .1.3.6.1.4.1.562.36.2.1.100.6.21.4.2.10.1 |
mscVrIpBgpExportNetPrefixThis attribute specifies the network prefix whose length is
determined by the length attribute under the same Network
component.rw IpAddress .1.3.6.1.4.1.562.36.2.1.100.6.21.4.2.10.1.1 |
mscVrIpBgpExportNetLengthThis attribute specifies the length of the network prefix.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.100.6.21.4.2.10.1.2 |
mscVrIpBgpExportProvTableThis group contains all the provisioned attributes for the Export
component. SEQUENCE OF MscVrIpBgpExportProvEntry .1.3.6.1.4.1.562.36.2.1.100.6.21.4.10 |
mscVrIpBgpExportProvEntryAn entry in the mscVrIpBgpExportProvTable. MscVrIpBgpExportProvEntry .1.3.6.1.4.1.562.36.2.1.100.6.21.4.10.1 |
mscVrIpBgpExportPeerAsThis key attribute specifies the autonomous system number of the
peer where the routes are advertised to. A value of 0 for this
attribute means this export policy applies to all peer ASes.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.100.6.21.4.10.1.1 |
mscVrIpBgpExportPeerIpAddressThis key attribute specifies the IP address of the peer where the
routes are advertised to. A value of 0.0.0.0 for this attribute means
this export policy applies to all peers.rw IpAddress .1.3.6.1.4.1.562.36.2.1.100.6.21.4.10.1.2 |
mscVrIpBgpExportProtocolThis key attribute specifies which protocol the export policy applies
to. If it is set to all, that means this export policy will apply all
routes in the IP routing table.
Example:
vr/1 ip ospf export/1 with
advertise Status = block
protocol = bgpExternal
bgpAsId = 3
peerAs = 5
This policy specifies that all routes learned from EBGP Peers that
are originated from AS 3 should not be advertised to AS 5.rw Enumeration .1.3.6.1.4.1.562.36.2.1.100.6.21.4.10.1.3 |
mscVrIpBgpExportEgpAsIdThis key attribute specifies the EGP autonomous system number
that this export policy will apply to.
When this value is non-zero, the protocol attribute must be set to
egp.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.100.6.21.4.10.1.4 |
mscVrIpBgpExportBgpAsIdThis key attribute specifies the BGP autonomous system number
that this export policy will apply to.
When this value is non-zero, the protocol attribute must be set to
either bgpInternal or bgpExternal.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.100.6.21.4.10.1.5 |
mscVrIpBgpExportOspfTagThis key attribute specifies the OSPF tag when the protocol
attribute is set to either ospfInternal or ospfExternal. The default
tag value 4294967295 (FFFFFFFF in hex) indicates that the tag not
specified.rw Hex .1.3.6.1.4.1.562.36.2.1.100.6.21.4.10.1.6 |
mscVrIpBgpExportRipInterfaceThis key attribute specifies the local RIP interface where the routes
are learned from.
The ripInterface attribute when non-zero should be equal to one of
the IP addresses provisioned as a logicalIf component under IpPort.
Otherwise, this policy will be ignored.
The value of the protocol attribute must be set to rip if a value for
the ripInterface attribute is non-zero.rw IpAddress .1.3.6.1.4.1.562.36.2.1.100.6.21.4.10.1.7 |
mscVrIpBgpExportRipNeighborThis key attribute specifies the RIP neighbor where the routes were
learned from.
The value of the protocol attribute must be set to rip
if a value for the ripNeighbor attribute is non-zero.rw IpAddress .1.3.6.1.4.1.562.36.2.1.100.6.21.4.10.1.8 |
mscVrIpBgpExportAdvertiseStatusThis attribute specifies whether data will be exported if it meets
criteria specified by the other key attributes of this component.rw Enumeration .1.3.6.1.4.1.562.36.2.1.100.6.21.4.10.1.9 |
mscVrIpBgpExportMultiExitDiscThis attribute specifies this Bgp component instance's metric to
discriminate between multiple exit points to an adjacent
autonomous system if the route meets the criteria specified by the
key attributes of this component. A lower value indicates a more
preferred route. A value of 0 for this attribute means the default
MED value provisioned under the Bgp component should be used.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.100.6.21.4.10.1.10 |
mscVrIpBgpExportSendMultiExitDiscToEbgpThis attribute specifies whether the Multi Exit Discriminator(MED)
attribute should be included in an update message sent to an EBGP
peer.rw Enumeration .1.3.6.1.4.1.562.36.2.1.100.6.21.4.10.1.11 |
mscVrIpBgpExportAsPathExpressionThis key attribute allows the user to enter a regular expression to
match the import AS Path Attribute of the export update message.
Note: the AS Path Attribute lists the ASs in reverse traversal order.
The syntax of the regular expression is a subset of the RFC 2280.
The basic syntax of a regular expression is a list of AS number
separated by a space which making up a AS path.
The following characters has the special meaning:
'.' - Matches any AS number.
'^n' - Matches the first AS item (n) in the AS Path Attribute,
or in order words, matches the last AS (n) traversed in
the AS path.
'n$' - Matches the last AS item (n) in the AS Path Attribute,
or in order words, matches the first AS (n) traversed in
the AS path.
'[n1 ... n2]' - Matches any AS number that appeared in the set n1 ...
n2.
'n1 - n2' - Matches any AS number between the range of n1 and
n2.
'()' - is supported to change the order of evaluation.
'n*' - Matches 0 or more occurrences of n, where n can be a
set, range or AS number.
'n+' - Matches 1 or more occurrences of n, where n can be a
set, range or AS number.
'n?' - Matches 0 or 1 occurrences of n, where n can be a
set, range or number.
The following logical operators are evaluated in decending order:
'NOT' - Given a regular expression x, NOT x matches the AS
number pattern that is not matched by x.
'AND' - Given two regular expressions x and y, x AND y
matches the intersection of the AS path that are
matched by x and those are matched by y.
'OR' - Given two regular expressions x and y, x OR y
matches the union of the AS path that are matched by x
and those are matched by y.
For example: The AS path '5 4 3 2 1', where 1 is the origin AS,
would be match by any one of the following regular expressions:
1$,
^5,
4 3,
5 3 - 4*,
5 [4 3 2] not10 2 1,
not (6 7 8 9 10) and 5 4 .* 1
Empty regular expression implies a match on all AS path.rw AsciiString .1.3.6.1.4.1.562.36.2.1.100.6.21.4.10.1.12 |
mscVrIpBgpExportCommunityExpressionThis key attribute allows the user to enter a regular expression to
match the import Community Attribute of the received update
message. The syntax of the regular expression is a subset of the
RFC 2280.
The basic syntax of a regular expression is a list of Community
number seperated by a space which making up a Community
attribute.
The following characters has the special meaning:
'[n1 ... n2]' - Matches any Community number that appeared in the
set n1 ... n2.
'n1 - n2' - Matches any Community number between the range of
n1 and n2.
'()' - is supported to change the order of evaluation.
'n*' - Matches 0 or more occurrences of n, where n can be a
set, range or Community number.
'n+' - Matches 1 or more occurrences of n, where n can be a
set, range or Community number.
'n?' - Matches 0 or 1 occurrences of n, where n can be a
set, range or number.
The following logical operators are evaluated in decending order:
'NOT' - Given a regular expression x, NOT x matches the
Community attribute that is not matched by x.
'AND' - Given two regular expressions x and y, x AND y
matches the intersection of the Community attribute that
are matched by x and those are matched by y.
'OR' - Given two regular expressions x and y, x OR y
matches the union of the Community attribute that are
matched by x and those are matched by y.
For example: The Community path '1 2 3 4 5' would be match by
any one of the following regular expression:
1,
5,
4 3,
2 3 - 4*,
1 [3 4 2]+,
not (6 7 8 9 10) and 1 2
Empty regular expression implies a match on all Community path.rw AsciiString .1.3.6.1.4.1.562.36.2.1.100.6.21.4.10.1.13 |
mscVrIpBgpExportExpressPreferenceThis attribute specifies the relative preference of the policy which
use the keys expressAsPath and expressCommunity. This attribute is
ignored if attributes expressAsPath and expressCommunity are both
empty. This attribute is used to break the tie when two export
policies' expression attributes match a specific AS Path or
Community. A higher value indicates a more preferred policy.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.100.6.21.4.10.1.14 |
mscVrIpBgpExportSendCommunityThis attribute indicates which community number this Export policy
will send along with the Path Attribute. Refer to RFC 1997 for the
detailed description of how this attribute may be used to pass
additional information to BGP peers. If the value is set to 0, no
community is added to the Community attribute.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.100.6.21.4.10.1.15 |
mscVrIpBgpExportInsertDummyAsThis attribute specifies the AS number(s) to be inserted into the AS
Path Attribute. The value is a seuence of AS number seperated by
period(.). For example, if the value is 20.20.30, the AS numbers 20,
20 and 30 would be inserted at the end of the AS Path Attribute just
before the local AS number.rw IntegerSequence .1.3.6.1.4.1.562.36.2.1.100.6.21.4.10.1.200 |
mscVrIpBgpAs OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.100.6.21.5 |
mscVrIpBgpAsRowStatusTableThis entry controls the addition and deletion of
mscVrIpBgpAs components. SEQUENCE OF MscVrIpBgpAsRowStatusEntry .1.3.6.1.4.1.562.36.2.1.100.6.21.5.1 |
mscVrIpBgpAsRowStatusEntryA single entry in the table represents a single
mscVrIpBgpAs component. MscVrIpBgpAsRowStatusEntry .1.3.6.1.4.1.562.36.2.1.100.6.21.5.1.1 |
mscVrIpBgpAsRowStatusThis variable is used as the basis for SNMP naming of
mscVrIpBgpAs components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.100.6.21.5.1.1.1 |
mscVrIpBgpAsComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.100.6.21.5.1.1.2 |
mscVrIpBgpAsStorageTypeThis variable represents the storage type value for the
mscVrIpBgpAs tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.100.6.21.5.1.1.4 |
mscVrIpBgpAsIndexThis variable represents the index for the mscVrIpBgpAs tables. Integer32 .1.3.6.1.4.1.562.36.2.1.100.6.21.5.1.1.10 |
mscVrIpBgpAsProvTableThis group contains the attributes associated to each autonomous
system for this Bgp component instance. SEQUENCE OF MscVrIpBgpAsProvEntry .1.3.6.1.4.1.562.36.2.1.100.6.21.5.10 |
mscVrIpBgpAsProvEntryAn entry in the mscVrIpBgpAsProvTable. MscVrIpBgpAsProvEntry .1.3.6.1.4.1.562.36.2.1.100.6.21.5.10.1 |
mscVrIpBgpAsWeightThis attribute specifies the weight for an autonomous system. It
allows users to prefer some ASes over others. It is used in route
selection. Lowest weight is preferred. Setting the weight of an AS
to 255 will make any route that traverses through that AS
unpreferred.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.100.6.21.5.10.1.1 |
mscVrIpBgpAggregate OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.100.6.21.6 |
mscVrIpBgpAggregateRowStatusTableThis entry controls the addition and deletion of
mscVrIpBgpAggregate components. SEQUENCE OF MscVrIpBgpAggregateRowStatusEntry .1.3.6.1.4.1.562.36.2.1.100.6.21.6.1 |
mscVrIpBgpAggregateRowStatusEntryA single entry in the table represents a single
mscVrIpBgpAggregate component. MscVrIpBgpAggregateRowStatusEntry .1.3.6.1.4.1.562.36.2.1.100.6.21.6.1.1 |
mscVrIpBgpAggregateRowStatusThis variable is used as the basis for SNMP naming of
mscVrIpBgpAggregate components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.100.6.21.6.1.1.1 |
mscVrIpBgpAggregateComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.100.6.21.6.1.1.2 |
mscVrIpBgpAggregateStorageTypeThis variable represents the storage type value for the
mscVrIpBgpAggregate tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.100.6.21.6.1.1.4 |
mscVrIpBgpAggregatePrefixIndexThis variable represents an index for the mscVrIpBgpAggregate tables. IpAddress .1.3.6.1.4.1.562.36.2.1.100.6.21.6.1.1.10 |
mscVrIpBgpAggregateLengthIndexThis variable represents an index for the mscVrIpBgpAggregate tables. Integer32 .1.3.6.1.4.1.562.36.2.1.100.6.21.6.1.1.11 |
mscVrIpBgpAggregateNet OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.100.6.21.6.2 |
mscVrIpBgpAggregateNetRowStatusTableThis entry controls the addition and deletion of
mscVrIpBgpAggregateNet components. SEQUENCE OF MscVrIpBgpAggregateNetRowStatusEntry .1.3.6.1.4.1.562.36.2.1.100.6.21.6.2.1 |
mscVrIpBgpAggregateNetRowStatusEntryA single entry in the table represents a single
mscVrIpBgpAggregateNet component. MscVrIpBgpAggregateNetRowStatusEntry .1.3.6.1.4.1.562.36.2.1.100.6.21.6.2.1.1 |
mscVrIpBgpAggregateNetRowStatusThis variable is used as the basis for SNMP naming of
mscVrIpBgpAggregateNet components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.100.6.21.6.2.1.1.1 |
mscVrIpBgpAggregateNetComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.100.6.21.6.2.1.1.2 |
mscVrIpBgpAggregateNetStorageTypeThis variable represents the storage type value for the
mscVrIpBgpAggregateNet tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.100.6.21.6.2.1.1.4 |
mscVrIpBgpAggregateNetIndexThis variable represents the index for the mscVrIpBgpAggregateNet tables. Integer32 .1.3.6.1.4.1.562.36.2.1.100.6.21.6.2.1.1.10 |
mscVrIpBgpAggregateNetProvTableThis group contains the set of provisionable attributes for the
Network component. SEQUENCE OF MscVrIpBgpAggregateNetProvEntry .1.3.6.1.4.1.562.36.2.1.100.6.21.6.2.10 |
mscVrIpBgpAggregateNetProvEntryAn entry in the mscVrIpBgpAggregateNetProvTable. MscVrIpBgpAggregateNetProvEntry .1.3.6.1.4.1.562.36.2.1.100.6.21.6.2.10.1 |
mscVrIpBgpAggregateNetPrefixThis attribute specifies the network prefix whose length is
determined by the length attribute under the same Network
component.rw IpAddress .1.3.6.1.4.1.562.36.2.1.100.6.21.6.2.10.1.1 |
mscVrIpBgpAggregateNetLengthThis attribute specifies the length of the network prefix.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.100.6.21.6.2.10.1.2 |
mscVrIpBgpAggregateNetProtocolThis attribute specifies the IP protocols to which this route should
belong.rw Enumeration .1.3.6.1.4.1.562.36.2.1.100.6.21.6.2.10.1.3 |
mscVrIpBgpAggregateNetEgpAsIdThis attribute specifies an EGP autonomous system number.
When this value is non-zero, the protocol attribute must be set to
either egp or to all. And this more specific route will be advertised
together with the aggregated route only if it is learned through egp
and this attribute matches the EGP autonomous system number
where the network is learned from.
The default value 0 indicates that the EGP autonomous system
number is not specified.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.100.6.21.6.2.10.1.4 |
mscVrIpBgpAggregateNetBgpAsIdThis attribute specifies the BGP autonomous system number.
When this value is non-zero, the protocol attribute must be set to
either bgp or to all. And this more specific route will be advertised
together with the aggregated route only if it is learned through BGP
and this attribute matches the BGP autonomous system number
where the network is learned from.
The default value 0 indicates that the BGP autonomous system
number is not specified.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.100.6.21.6.2.10.1.5 |
mscVrIpBgpAggregateNetOspfTagThis attribute specifies the OSPF tag.
When this attribute is set to a value other than the default value
FFFFFFFF in hex, the protocol attribute must be set to either ospf
or to all. And this more specific route will be advertised together
with the aggregated route only if its OSPF tag matches this
value.
The default tag value 4294967295 (FFFFFFFF in hex) indicates that
the tag is not specified.rw Hex .1.3.6.1.4.1.562.36.2.1.100.6.21.6.2.10.1.6 |
mscVrIpBgpAggregateNetRipInterfaceThis attribute specifies a local RIP interface which should be equal
to one of the IP addresses provisioned as a logicalIf component
under IpPort.
When this value is non-zero, the value of the protocol attribute must
be either set to rip or to all. And this more specific route will be
advertised together with the aggregated route only if it is learned
through RIP and this RIP interface.
The default value 0.0.0.0 indicates that the RIP interface is not
specified.rw IpAddress .1.3.6.1.4.1.562.36.2.1.100.6.21.6.2.10.1.7 |
mscVrIpBgpAggregateNetActionThis attribute specifies whether this network should be aggregated
or advertised out.rw Enumeration .1.3.6.1.4.1.562.36.2.1.100.6.21.6.2.10.1.8 |
mscVrIpBgpIndb OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.100.6.21.7 |
mscVrIpBgpIndbRowStatusTable*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This entry controls the addition and deletion of
mscVrIpBgpIndb components. SEQUENCE OF MscVrIpBgpIndbRowStatusEntry .1.3.6.1.4.1.562.36.2.1.100.6.21.7.1 |
mscVrIpBgpIndbRowStatusEntryA single entry in the table represents a single
mscVrIpBgpIndb component. MscVrIpBgpIndbRowStatusEntry .1.3.6.1.4.1.562.36.2.1.100.6.21.7.1.1 |
mscVrIpBgpIndbRowStatusThis variable is used as the basis for SNMP naming of
mscVrIpBgpIndb components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.100.6.21.7.1.1.1 |
mscVrIpBgpIndbComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.100.6.21.7.1.1.2 |
mscVrIpBgpIndbStorageTypeThis variable represents the storage type value for the
mscVrIpBgpIndb tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.100.6.21.7.1.1.4 |
mscVrIpBgpIndbPrefixIndexThis variable represents an index for the mscVrIpBgpIndb tables. IpAddress .1.3.6.1.4.1.562.36.2.1.100.6.21.7.1.1.10 |
mscVrIpBgpIndbLengthIndexThis variable represents an index for the mscVrIpBgpIndb tables. Integer32 .1.3.6.1.4.1.562.36.2.1.100.6.21.7.1.1.11 |
mscVrIpBgpIndbPeerIndexThis variable represents an index for the mscVrIpBgpIndb tables. IpAddress .1.3.6.1.4.1.562.36.2.1.100.6.21.7.1.1.12 |
mscVrIpBgpIndbOperTable*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This group contains all the operational attributes of the IndbEntry
component. SEQUENCE OF MscVrIpBgpIndbOperEntry .1.3.6.1.4.1.562.36.2.1.100.6.21.7.10 |
mscVrIpBgpIndbOperEntryAn entry in the mscVrIpBgpIndbOperTable. MscVrIpBgpIndbOperEntry .1.3.6.1.4.1.562.36.2.1.100.6.21.7.10.1 |
mscVrIpBgpIndbOriginThis attribute indicates the ultimate origin of the path information.
A value of incomplete means this information is not available.ro Enumeration .1.3.6.1.4.1.562.36.2.1.100.6.21.7.10.1.4 |
mscVrIpBgpIndbInLocaldbThis attribute indicates whether or not this route was chosen as the
best BGP4 route.ro Enumeration .1.3.6.1.4.1.562.36.2.1.100.6.21.7.10.1.5 |
mscVrIpBgpIndbNextHopThis attribute indicates the IP address of the border router that
should be used as the next hop for the destination network.ro IpAddress .1.3.6.1.4.1.562.36.2.1.100.6.21.7.10.1.6 |
mscVrIpBgpIndbLocalPreferenceThis attribute indicates our IBGP peer's degree of preference for an
advertised route. A higher value indicates a more preferred route.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.100.6.21.7.10.1.7 |
mscVrIpBgpIndbCalcLocalPrefThis attribute indicates our degree of preference for this route. A
higher value indicates a more preferred route.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.100.6.21.7.10.1.8 |
mscVrIpBgpIndbMultiExitDiscriminatorThis attribute indicates a metric used to discriminate between
multiple exit points to the same adjacent autonomous system. A
lower value indicates a more preferred route.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.100.6.21.7.10.1.9 |
mscVrIpBgpIndbAtomicAggregateThis attribute indicates whether or not the local system has selected
a less specific route without selecting a more specific route.ro Enumeration .1.3.6.1.4.1.562.36.2.1.100.6.21.7.10.1.10 |
mscVrIpBgpIndbAggregatorAsThis attribute indicates the AS number of the last BGP4 speaker
that performed route aggregation. A value of zero (0) indicates the
absence of this attribute.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.100.6.21.7.10.1.11 |
mscVrIpBgpIndbAggregatorAddrThis attribute indicates the IP address of the last BGP4 speaker that
performed route aggregation. A value of 0.0.0.0 indicates the
absence of this attribute.ro IpAddress .1.3.6.1.4.1.562.36.2.1.100.6.21.7.10.1.12 |
mscVrIpBgpIndbAsPathThis attribute indicates the sequence of AS path segments. The AS
Path Attribute lists the ASs in reverse traversal order.ro AsciiString .1.3.6.1.4.1.562.36.2.1.100.6.21.7.10.1.13 |
mscVrIpBgpIndbUnknownAttributesThis attribute indicates all the path attributes not understood by this
Bgp component instance.ro AsciiString .1.3.6.1.4.1.562.36.2.1.100.6.21.7.10.1.14 |
mscVrIpBgpIndbCommunityPathThis attribute indicates the Community path attribute.ro AsciiString .1.3.6.1.4.1.562.36.2.1.100.6.21.7.10.1.15 |
mscVrIpBgpIndbAsOriginatorIdThis attribute is associated with the Route Reflector. It indicates the
router-id of the originator in the local AS. A value of 0.0.0.0
indicates this attribute is not present in the learned IBGP route or if
this Bgp instance is not a Route Reflector.ro IpAddress .1.3.6.1.4.1.562.36.2.1.100.6.21.7.10.1.16 |
mscVrIpBgpIndbRrClusterListTable*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This attribute indicates a sequence of cluster-ids that the route has
traversed. A blank list indicates this attribute is not present in the
learned IBGP route or if this Bgp instance is not a Route Reflector. SEQUENCE OF MscVrIpBgpIndbRrClusterListEntry .1.3.6.1.4.1.562.36.2.1.100.6.21.7.798 |
mscVrIpBgpIndbRrClusterListEntryAn entry in the mscVrIpBgpIndbRrClusterListTable. MscVrIpBgpIndbRrClusterListEntry .1.3.6.1.4.1.562.36.2.1.100.6.21.7.798.1 |
mscVrIpBgpIndbRrClusterListValueThis variable represents both the value and the index for the
mscVrIpBgpIndbRrClusterListTable.ro IpAddress .1.3.6.1.4.1.562.36.2.1.100.6.21.7.798.1.1 |
mscVrIpBgpLocaldb OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.100.6.21.8 |
mscVrIpBgpLocaldbRowStatusTable*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This entry controls the addition and deletion of
mscVrIpBgpLocaldb components. SEQUENCE OF MscVrIpBgpLocaldbRowStatusEntry .1.3.6.1.4.1.562.36.2.1.100.6.21.8.1 |
mscVrIpBgpLocaldbRowStatusEntryA single entry in the table represents a single
mscVrIpBgpLocaldb component. MscVrIpBgpLocaldbRowStatusEntry .1.3.6.1.4.1.562.36.2.1.100.6.21.8.1.1 |
mscVrIpBgpLocaldbRowStatusThis variable is used as the basis for SNMP naming of
mscVrIpBgpLocaldb components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.100.6.21.8.1.1.1 |
mscVrIpBgpLocaldbComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.100.6.21.8.1.1.2 |
mscVrIpBgpLocaldbStorageTypeThis variable represents the storage type value for the
mscVrIpBgpLocaldb tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.100.6.21.8.1.1.4 |
mscVrIpBgpLocaldbPrefixIndexThis variable represents an index for the mscVrIpBgpLocaldb tables. IpAddress .1.3.6.1.4.1.562.36.2.1.100.6.21.8.1.1.10 |
mscVrIpBgpLocaldbLengthIndexThis variable represents an index for the mscVrIpBgpLocaldb tables. Integer32 .1.3.6.1.4.1.562.36.2.1.100.6.21.8.1.1.11 |
mscVrIpBgpLocaldbPeerIndexThis variable represents an index for the mscVrIpBgpLocaldb tables. IpAddress .1.3.6.1.4.1.562.36.2.1.100.6.21.8.1.1.12 |
mscVrIpBgpLocaldbOperTable*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This group contains all the operational attributes of the
LocaldbEntry component. SEQUENCE OF MscVrIpBgpLocaldbOperEntry .1.3.6.1.4.1.562.36.2.1.100.6.21.8.10 |
mscVrIpBgpLocaldbOperEntryAn entry in the mscVrIpBgpLocaldbOperTable. MscVrIpBgpLocaldbOperEntry .1.3.6.1.4.1.562.36.2.1.100.6.21.8.10.1 |
mscVrIpBgpLocaldbOriginThis attribute indicates the ultimate origin of the path information.
A value of incomplete means this information is not available.ro Enumeration .1.3.6.1.4.1.562.36.2.1.100.6.21.8.10.1.4 |
mscVrIpBgpLocaldbNextHopThis attribute indicates the IP address of the border router that
should be used as the next hop for the destination network.ro IpAddress .1.3.6.1.4.1.562.36.2.1.100.6.21.8.10.1.5 |
mscVrIpBgpLocaldbLocalPreferenceThis attribute indicates our IBGP peer's degree of preference for an
advertised route. A higher value indicates a more preferred route.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.100.6.21.8.10.1.6 |
mscVrIpBgpLocaldbMultiExitDiscriminatorThis attribute indicates a metric used to discriminate between
multiple exit points to the same adjacent autonomous system. A
lower value indicates a more preferred route.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.100.6.21.8.10.1.7 |
mscVrIpBgpLocaldbAtomicAggregateThis attribute indicates whether or not the local system has selected
a less specific route without selecting a more specific route.ro Enumeration .1.3.6.1.4.1.562.36.2.1.100.6.21.8.10.1.8 |
mscVrIpBgpLocaldbAggregatorAsThis attribute indicates the AS number of the last BGP4 speaker
that performed route aggregation. A value of zero (0) indicates the
absence of this attribute.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.100.6.21.8.10.1.9 |
mscVrIpBgpLocaldbAggregatorAddrThis attribute indicates the IP address of the last BGP4 speaker that
performed route aggregation. A value of 0.0.0.0 indicates the
absence of this attribute.ro IpAddress .1.3.6.1.4.1.562.36.2.1.100.6.21.8.10.1.10 |
mscVrIpBgpLocaldbAsPathThis attribute indicates the sequence of AS path segments. The AS
Path Attribute lists the ASs in reverse traversal order.ro AsciiString .1.3.6.1.4.1.562.36.2.1.100.6.21.8.10.1.11 |
mscVrIpBgpLocaldbUnknownAttributesThis attribute indicates all the path attributes not understood by this
Bgp component instance.ro AsciiString .1.3.6.1.4.1.562.36.2.1.100.6.21.8.10.1.12 |
mscVrIpBgpLocaldbCommunityPathThis attribute indicates the Community path attribute.ro AsciiString .1.3.6.1.4.1.562.36.2.1.100.6.21.8.10.1.13 |
mscVrIpBgpLocaldbAsOriginatorIdThis attribute is associated with the Route Reflector. It indicates the
router-id of the originator in the local AS. A value of 0.0.0.0
indicates this attribute is not present in the learned IBGP route or if
this Bgp instance is not a Route Reflector.ro IpAddress .1.3.6.1.4.1.562.36.2.1.100.6.21.8.10.1.14 |
mscVrIpBgpLocaldbRrClusterListTable*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This attribute indicates a sequence of cluster-ids that the route has
traversed. A blank list indicates this attribute is not present in the
learned IBGP route or if this Bgp instance is not a Route Reflector. SEQUENCE OF MscVrIpBgpLocaldbRrClusterListEntry .1.3.6.1.4.1.562.36.2.1.100.6.21.8.797 |
mscVrIpBgpLocaldbRrClusterListEntryAn entry in the mscVrIpBgpLocaldbRrClusterListTable. MscVrIpBgpLocaldbRrClusterListEntry .1.3.6.1.4.1.562.36.2.1.100.6.21.8.797.1 |
mscVrIpBgpLocaldbRrClusterListValueThis variable represents both the value and the index for the
mscVrIpBgpLocaldbRrClusterListTable.ro IpAddress .1.3.6.1.4.1.562.36.2.1.100.6.21.8.797.1.1 |
mscVrIpBgpOutdb OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.100.6.21.9 |
mscVrIpBgpOutdbRowStatusTable*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This entry controls the addition and deletion of
mscVrIpBgpOutdb components. SEQUENCE OF MscVrIpBgpOutdbRowStatusEntry .1.3.6.1.4.1.562.36.2.1.100.6.21.9.1 |
mscVrIpBgpOutdbRowStatusEntryA single entry in the table represents a single
mscVrIpBgpOutdb component. MscVrIpBgpOutdbRowStatusEntry .1.3.6.1.4.1.562.36.2.1.100.6.21.9.1.1 |
mscVrIpBgpOutdbRowStatusThis variable is used as the basis for SNMP naming of
mscVrIpBgpOutdb components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.100.6.21.9.1.1.1 |
mscVrIpBgpOutdbComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.100.6.21.9.1.1.2 |
mscVrIpBgpOutdbStorageTypeThis variable represents the storage type value for the
mscVrIpBgpOutdb tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.100.6.21.9.1.1.4 |
mscVrIpBgpOutdbPrefixIndexThis variable represents an index for the mscVrIpBgpOutdb tables. IpAddress .1.3.6.1.4.1.562.36.2.1.100.6.21.9.1.1.10 |
mscVrIpBgpOutdbLengthIndexThis variable represents an index for the mscVrIpBgpOutdb tables. Integer32 .1.3.6.1.4.1.562.36.2.1.100.6.21.9.1.1.11 |
mscVrIpBgpOutdbPeerIndexThis variable represents an index for the mscVrIpBgpOutdb tables. IpAddress .1.3.6.1.4.1.562.36.2.1.100.6.21.9.1.1.12 |
mscVrIpBgpOutdbOperTable*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This group contains all the operational attributes of the OutdbEntry
component. SEQUENCE OF MscVrIpBgpOutdbOperEntry .1.3.6.1.4.1.562.36.2.1.100.6.21.9.10 |
mscVrIpBgpOutdbOperEntryAn entry in the mscVrIpBgpOutdbOperTable. MscVrIpBgpOutdbOperEntry .1.3.6.1.4.1.562.36.2.1.100.6.21.9.10.1 |
mscVrIpBgpOutdbOriginThis attribute indicates the ultimate origin of the path information.
A value of incomplete means this information is not available.ro Enumeration .1.3.6.1.4.1.562.36.2.1.100.6.21.9.10.1.4 |
mscVrIpBgpOutdbNextHopThis attribute indicates the IP address of the border router that
should be used as the next hop for the destination network.ro IpAddress .1.3.6.1.4.1.562.36.2.1.100.6.21.9.10.1.5 |
mscVrIpBgpOutdbLocalPreferenceThis attribute indicates this Bgp instance's degree of preference for
an advertised route. A higher value indicates a more preferred route.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.100.6.21.9.10.1.6 |
mscVrIpBgpOutdbMultiExitDiscriminatorThis attribute indicates a metric used to discriminate between
multiple exit points to the same adjacent autonomous system. A
lower value indicates a more preferred route.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.100.6.21.9.10.1.7 |
mscVrIpBgpOutdbAtomicAggregateThis attribute indicates whether or not the local system has selected
a less specific route without selecting a more specific route.ro Enumeration .1.3.6.1.4.1.562.36.2.1.100.6.21.9.10.1.8 |
mscVrIpBgpOutdbAggregatorAsThis attribute indicates the AS number of the last BGP4 speaker
that performed route aggregation. A value of zero (0) indicates the
absence of this attribute.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.100.6.21.9.10.1.9 |
mscVrIpBgpOutdbAggregatorAddrThis attribute indicates the IP address of the last BGP4 speaker that
performed route aggregation. A value of 0.0.0.0 indicates the
absence of this attribute.ro IpAddress .1.3.6.1.4.1.562.36.2.1.100.6.21.9.10.1.10 |
mscVrIpBgpOutdbAsPathThis attribute indicates the sequence of AS path segments. The AS
Path Attribute lists the ASs in reverse traversal order.ro AsciiString .1.3.6.1.4.1.562.36.2.1.100.6.21.9.10.1.11 |
mscVrIpBgpOutdbUnknownAttributesThis attribute indicates all the path attributes not understood by this
Bgp component instance.ro AsciiString .1.3.6.1.4.1.562.36.2.1.100.6.21.9.10.1.12 |
mscVrIpBgpOutdbCommunityPathThis attribute indicates the Community path attribute.ro AsciiString .1.3.6.1.4.1.562.36.2.1.100.6.21.9.10.1.13 |
mscVrIpBgpOutdbAsOriginatorIdThis attribute is associated with the Route Reflector. It indicates the
router-id of the originator of a route in the local AS. When the
Route Reflector distributes a learned IBGP route to other IBGP
speakers, the value of this attribute in the learned route is used if
one is present; othewise, the Route Reflector's router-id is used. A
value of 0.0.0.0 indicates this Bgp instance is not a Route Reflector.ro IpAddress .1.3.6.1.4.1.562.36.2.1.100.6.21.9.10.1.14 |
mscVrIpBgpOutdbRrClusterListTable*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This attribute indicates a sequence of cluster-ids that the route has
traversed. When the Route Reflector redistributes a learned IBGP to
other IBGP speakers, the cluster id of this Route Reflector is
appended to the cluster list of the learned IBGP route. If this Bgp
instance is not a Route Reflector, this attribute is blank. SEQUENCE OF MscVrIpBgpOutdbRrClusterListEntry .1.3.6.1.4.1.562.36.2.1.100.6.21.9.799 |
mscVrIpBgpOutdbRrClusterListEntryAn entry in the mscVrIpBgpOutdbRrClusterListTable. MscVrIpBgpOutdbRrClusterListEntry .1.3.6.1.4.1.562.36.2.1.100.6.21.9.799.1 |
mscVrIpBgpOutdbRrClusterListValueThis variable represents both the value and the index for the
mscVrIpBgpOutdbRrClusterListTable.ro IpAddress .1.3.6.1.4.1.562.36.2.1.100.6.21.9.799.1.1 |
mscVrIpBgpProvTableThis group contains the provisionable attributes for the Bgp
component. SEQUENCE OF MscVrIpBgpProvEntry .1.3.6.1.4.1.562.36.2.1.100.6.21.100 |
mscVrIpBgpProvEntryAn entry in the mscVrIpBgpProvTable. MscVrIpBgpProvEntry .1.3.6.1.4.1.562.36.2.1.100.6.21.100.1 |
mscVrIpBgpBgpIdentifierThis attribute specifies the Bgp Identifier of this Bgp component
instance. It is picked from the IP address space, and should follow
the same rule as choosing an unique IP address for IpPort.rw IpAddress .1.3.6.1.4.1.562.36.2.1.100.6.21.100.1.1 |
mscVrIpBgpLocalAsThis attribute specifies the autonomous system identifier
for this Bgp component instance.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.100.6.21.100.1.2 |
mscVrIpBgpDefaultLocalPreferenceThis attribute specifies this Bgp component instance's default
degree of preference for routes. It can be overridden by the
localPreference provisioned in ImportPolicy. A higher value
indicates a more preferred route.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.100.6.21.100.1.3 |
mscVrIpBgpDefaultMultiExitDiscThis attribute specifies this Bgp component instance's default metric
to discriminate between multiple exit points to the same adjacent
autonomous system. It can be overridden by the
sendMultiExitDiscToEbgp provisioned in ExportPolicy. A lower
value indicates a more preferred route.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.100.6.21.100.1.4 |
mscVrIpBgpRouteThrottleLimitThis attribute specifies the maximum number of routes in the IP
forwarding table this Bgp component instance will process at one
time to decide if a route in the IP forwarding table should be
exported to a peer. This limit is used for the throttling and is made
configurable because the throttling requirements will be different
under different network configurations. The default value is 250.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.100.6.21.100.1.5 |
mscVrIpBgpRouteThrottleInterThis attribute specifies the interval in seconds, between the
processing of the routes in the IP forwarding table to decide if a
route in the IP forwarding table should be exported to a peer. This
interval is used for the throttling and is made configurable because
the throttling requirements will be different under different network
configurations. The default value is 5 seconds.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.100.6.21.100.1.6 |
mscVrIpBgpRouteReflectorThis attribute specifies whether this Bgp instance is a Route
Reflector. If the value of this attribute is true, Bgp redistributes
routes it learns from an IBGP speaker to other IBGP speakers in the
AS. The rule of redistribution depends on the peer type: 1) When a
route is learned from a non-client peer, it is redistributed to all the
client peers within the cluster. 2) When a route is learned from a
client peer, it is redistributed to all the non-client peers and also to
the client peers. If the value of this attribute is false, Bgp does not
redistribute routes it learns from one IBGP speaker to other IBGP
speakers in the AS.rw Enumeration .1.3.6.1.4.1.562.36.2.1.100.6.21.100.1.7 |
mscVrIpBgpRouteReflectorClusterThis attribute identifies the cluster consisting of the Route Reflector
and its peer clients. When routeReflector of Bgp is true, value of
0.0.0.0 or 255.255.255.255 is invalid; the default value of this
attribute is same as bgpIdentifier. For redundancy, a cluster may
have more than one Route Reflector; in this case, the value of this
attribute of all the Route Reflectors in the same cluster should be
same. The value of this attribute is ignored when routeReflector of
Bgp is falserw IpAddress .1.3.6.1.4.1.562.36.2.1.100.6.21.100.1.8 |
mscVrIpBgpRedistributeIgpToIbgpThis attribute specifies whether this Bgp instance allows exporting
of IGP routes to internal Bgp peers. IGP routes include the routes
learned from OSPF, RIP, local routes and static routes. If the value
of this attribute is true, and if ExportPolicy is specified to distribute,
then Bgp allows IGP route to be distributed to internal Bgp peers. If
the value of this attribute is false, Bgp does not allow IGP routes to
be distributed to internal Bgp peer, even if ExportPolicy is specified
to distribute. This attribute is set to true if and only this Bgp is part
of the Carrier Manage Service, otherwise, a routing loop may result.rw Enumeration .1.3.6.1.4.1.562.36.2.1.100.6.21.100.1.9 |
mscVrIpBgpOperTableThis group contains the operational attributes for the Bgp
component. SEQUENCE OF MscVrIpBgpOperEntry .1.3.6.1.4.1.562.36.2.1.100.6.21.101 |
mscVrIpBgpOperEntryAn entry in the mscVrIpBgpOperTable. MscVrIpBgpOperEntry .1.3.6.1.4.1.562.36.2.1.100.6.21.101.1 |
mscVrIpBgpTableVersionThis attribute indicates the version of the BGP routing table. It is
incremented every time the BGP routing table changes. This
counter will wrap to zero once the value exceeds the maximum
value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.100.6.21.101.1.2 |
mscVrIpBgpInMsgsThis attribute counts the total number of BGP messages received
without error. This counter will wrap to zero once the value exceeds
the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.100.6.21.101.1.3 |
mscVrIpBgpInErrorsThis attribute counts the total number of BGP messages received
from all peers that proved to be in error. This counter will wrap to
zero once the value exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.100.6.21.101.1.4 |
mscVrIpBgpInErrorMsgsThis attribute counts the total number of BGP NOTIFICATION
messages from all the peers. This counter will wrap to zero once the
value exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.100.6.21.101.1.5 |
mscVrIpBgpOutMsgsThis attribute counts the total number of BGP messages sent to
peers. This counter will wrap to zero once the value exceeds the
maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.100.6.21.101.1.6 |
mscVrIpBgpOutDiscardsThis attribute counts the number of BGP messages that were locally
generated but were not sent out due to resource limitations within a
Bgp instance. This counter will wrap to zero once the value exceeds
the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.100.6.21.101.1.7 |
mscVrIpBgpOutErrorMsgsThis attribute counts the BGP NOTIFICATION messages sent to
the peers. This counter will wrap to zero once the value exceeds the
maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.100.6.21.101.1.8 |
mscVrIpBgpIndbSizeThis attribute indicates the number of Bgp indb entries under this
Bgp component instance.ro Counter32 .1.3.6.1.4.1.562.36.2.1.100.6.21.101.1.9 |
mscVrIpBgpStateTableThis group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. SEQUENCE OF MscVrIpBgpStateEntry .1.3.6.1.4.1.562.36.2.1.100.6.21.102 |
mscVrIpBgpStateEntryAn entry in the mscVrIpBgpStateTable. MscVrIpBgpStateEntry .1.3.6.1.4.1.562.36.2.1.100.6.21.102.1 |
mscVrIpBgpAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.100.6.21.102.1.1 |
mscVrIpBgpOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.ro Enumeration .1.3.6.1.4.1.562.36.2.1.100.6.21.102.1.2 |
mscVrIpBgpUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.ro Enumeration .1.3.6.1.4.1.562.36.2.1.100.6.21.102.1.3 |
mscVrIpBgpAdminControlTableThis group includes the Administrative Control attribute. This
attribute defines the current administrative state of this component. SEQUENCE OF MscVrIpBgpAdminControlEntry .1.3.6.1.4.1.562.36.2.1.100.6.21.103 |
mscVrIpBgpAdminControlEntryAn entry in the mscVrIpBgpAdminControlTable. MscVrIpBgpAdminControlEntry .1.3.6.1.4.1.562.36.2.1.100.6.21.103.1 |
mscVrIpBgpSnmpAdminStatusThe desired state of the interface. The up state indicates the
interface is operational and packet forwarding is allowed. The down
state indicates the interface is not operational and packet forwarding
is unavailable. The testing state indicates that no operational
packets can be passed.rw Enumeration .1.3.6.1.4.1.562.36.2.1.100.6.21.103.1.1 |
mscVrIpBgpOperStatusTableThis group includes the Operational Status attribute. This attribute
defines the current operational state of this component. SEQUENCE OF MscVrIpBgpOperStatusEntry .1.3.6.1.4.1.562.36.2.1.100.6.21.106 |
mscVrIpBgpOperStatusEntryAn entry in the mscVrIpBgpOperStatusTable. MscVrIpBgpOperStatusEntry .1.3.6.1.4.1.562.36.2.1.100.6.21.106.1 |
mscVrIpBgpSnmpOperStatusThe current state of the interface. The up state indicates the
interface is operational and capable of forwarding packets. The
down state indicates the interface is not operational, thus unable to
forward packets. testing state indicates that no operational packets
can be passed.ro Enumeration .1.3.6.1.4.1.562.36.2.1.100.6.21.106.1.1 |
bgpMIB OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.141 |
IMPORTS Unknown .1.3.6.1.4.1.562.36.2.2.141 |
bgpGroup OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.141.1 |
bgpGroupCA OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.141.1.1 |
bgpGroupCA02 OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.141.1.1.3 |
bgpGroupCA02A OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.141.1.1.3.2 |
bgpCapabilities OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.141.3 |
bgpCapabilitiesCA OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.141.3.1 |
bgpCapabilitiesCA02 OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.141.3.1.3 |
bgpCapabilitiesCA02A OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.141.3.1.3.2 |