Nortel-MsCarrier-MscPassport-AtmUniMIB
AI MIB Summary
Standard SNMP MIB module defining data structures for Nortel-MsCarrier-MscPassport-AtmUniMIB.
353
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
353 total| Object Name |
|---|
mscAtmIfUni OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.114.6 |
mscAtmIfUniRowStatusTableThis entry controls the addition and deletion of
mscAtmIfUni components. SEQUENCE OF MscAtmIfUniRowStatusEntry .1.3.6.1.4.1.562.36.2.1.114.6.1 |
mscAtmIfUniRowStatusEntryA single entry in the table represents a single
mscAtmIfUni component. MscAtmIfUniRowStatusEntry .1.3.6.1.4.1.562.36.2.1.114.6.1.1 |
mscAtmIfUniRowStatusThis variable is used as the basis for SNMP naming of
mscAtmIfUni components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.6.1.1.1 |
mscAtmIfUniComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.6.1.1.2 |
mscAtmIfUniStorageTypeThis variable represents the storage type value for the
mscAtmIfUni tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.6.1.1.4 |
mscAtmIfUniIndexThis variable represents the index for the mscAtmIfUni tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.114.6.1.1.10 |
mscAtmIfUniIlmi OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.114.6.2 |
mscAtmIfUniIlmiRowStatusTableThis entry controls the addition and deletion of
mscAtmIfUniIlmi components. SEQUENCE OF MscAtmIfUniIlmiRowStatusEntry .1.3.6.1.4.1.562.36.2.1.114.6.2.1 |
mscAtmIfUniIlmiRowStatusEntryA single entry in the table represents a single
mscAtmIfUniIlmi component. MscAtmIfUniIlmiRowStatusEntry .1.3.6.1.4.1.562.36.2.1.114.6.2.1.1 |
mscAtmIfUniIlmiRowStatusThis variable is used as the basis for SNMP naming of
mscAtmIfUniIlmi components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.6.2.1.1.1 |
mscAtmIfUniIlmiComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.6.2.1.1.2 |
mscAtmIfUniIlmiStorageTypeThis variable represents the storage type value for the
mscAtmIfUniIlmi tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.6.2.1.1.4 |
mscAtmIfUniIlmiIndexThis variable represents the index for the mscAtmIfUniIlmi tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.114.6.2.1.1.10 |
mscAtmIfUniIlmiStateTableThis group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. SEQUENCE OF MscAtmIfUniIlmiStateEntry .1.3.6.1.4.1.562.36.2.1.114.6.2.10 |
mscAtmIfUniIlmiStateEntryAn entry in the mscAtmIfUniIlmiStateTable. MscAtmIfUniIlmiStateEntry .1.3.6.1.4.1.562.36.2.1.114.6.2.10.1 |
mscAtmIfUniIlmiAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.114.6.2.10.1.1 |
mscAtmIfUniIlmiOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.ro Enumeration .1.3.6.1.4.1.562.36.2.1.114.6.2.10.1.2 |
mscAtmIfUniIlmiUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.ro Enumeration .1.3.6.1.4.1.562.36.2.1.114.6.2.10.1.3 |
mscAtmIfUniIlmiProvTableThis attribute group contains the provisionable attributes for the Ilmi
component. SEQUENCE OF MscAtmIfUniIlmiProvEntry .1.3.6.1.4.1.562.36.2.1.114.6.2.11 |
mscAtmIfUniIlmiProvEntryAn entry in the mscAtmIfUniIlmiProvTable. MscAtmIfUniIlmiProvEntry .1.3.6.1.4.1.562.36.2.1.114.6.2.11.1 |
mscAtmIfUniIlmiVciThis attribute identifies the ILMI channel number.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.114.6.2.11.1.1 |
mscAtmIfUniIlmiOperatingModeThis attribute is used to enable/disable the ILMI protocol.
addressRegEnabled indicates that the ILMI address registration
protocol is enabled. addressRegDisabled indicates that the ILMI
address registration protocol is disabled. ilmiDisabled indicates that
all of ILMI is disabled.rw Enumeration .1.3.6.1.4.1.562.36.2.1.114.6.2.11.1.2 |
mscAtmIfUniIlmiStatsTableThis attribute group contains the statistics for the AtmIlmi
component. SEQUENCE OF MscAtmIfUniIlmiStatsEntry .1.3.6.1.4.1.562.36.2.1.114.6.2.12 |
mscAtmIfUniIlmiStatsEntryAn entry in the mscAtmIfUniIlmiStatsTable. MscAtmIfUniIlmiStatsEntry .1.3.6.1.4.1.562.36.2.1.114.6.2.12.1 |
mscAtmIfUniIlmiTxPdusThis attribute counts the number of transmitted ILMI PDUs. The
counter wraps to 0 when the maximum value is exceeded.ro Counter32 .1.3.6.1.4.1.562.36.2.1.114.6.2.12.1.1 |
mscAtmIfUniIlmiRxPdusThis attribute counts the total number of received ILMI PDUs.The
counter wraps to 0 when the maximum value is exceeded.ro Counter32 .1.3.6.1.4.1.562.36.2.1.114.6.2.12.1.2 |
mscAtmIfUniIlmiRxBadPdusDiscardedThis attribute counts the number of received ILMI PDUs that were
discarded due to invalid SNMP format. The counter wraps to 0
when the maximum value is exceeded.ro Counter32 .1.3.6.1.4.1.562.36.2.1.114.6.2.12.1.3 |
mscAtmIfUniIlmiPrefixToRegisterTableThis attribute is a list of zero or more addresses. If the side attribute
in the Uni component is set to user, then this attribute must be
empty; if the side attribute is set to network, then this attribute is a
list of prefixes.This attribute represents a list of prefix addresses (26
digits) that are sent to the user side. If no prefixes are entered, then
the nodeAddress attribute in the AtmCallRouter component is used
for address registration. SEQUENCE OF MscAtmIfUniIlmiPrefixToRegisterEntry .1.3.6.1.4.1.562.36.2.1.114.6.2.287 |
mscAtmIfUniIlmiPrefixToRegisterEntryAn entry in the mscAtmIfUniIlmiPrefixToRegisterTable. MscAtmIfUniIlmiPrefixToRegisterEntry .1.3.6.1.4.1.562.36.2.1.114.6.2.287.1 |
mscAtmIfUniIlmiPrefixToRegisterValueThis variable represents both the value and the index for the
mscAtmIfUniIlmiPrefixToRegisterTable.rw AsciiString .1.3.6.1.4.1.562.36.2.1.114.6.2.287.1.1 |
mscAtmIfUniIlmiPrefixToRegisterRowStatusThis variable is used to control the addition and deletion
of individual values of the mscAtmIfUniIlmiPrefixToRegisterTable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.6.2.287.1.2 |
mscAtmIfUniIlmiEsiToRegisterTableThis attribute is a list of zero or more addresses. If the side attribute
in the Uni component is set to network, then this attribute must be
an empty list; if the side attribute is set to user, then this attribute is
a list of end system indicators (ESI) addresses (12 hex digits) that
are used to compose addresses to register with the network side. SEQUENCE OF MscAtmIfUniIlmiEsiToRegisterEntry .1.3.6.1.4.1.562.36.2.1.114.6.2.288 |
mscAtmIfUniIlmiEsiToRegisterEntryAn entry in the mscAtmIfUniIlmiEsiToRegisterTable. MscAtmIfUniIlmiEsiToRegisterEntry .1.3.6.1.4.1.562.36.2.1.114.6.2.288.1 |
mscAtmIfUniIlmiEsiToRegisterValueThis variable represents both the value and the index for the
mscAtmIfUniIlmiEsiToRegisterTable.rw AsciiString .1.3.6.1.4.1.562.36.2.1.114.6.2.288.1.1 |
mscAtmIfUniIlmiEsiToRegisterRowStatusThis variable is used to control the addition and deletion
of individual values of the mscAtmIfUniIlmiEsiToRegisterTable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.6.2.288.1.2 |
mscAtmIfUniSig OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.114.6.3 |
mscAtmIfUniSigRowStatusTableThis entry controls the addition and deletion of
mscAtmIfUniSig components. SEQUENCE OF MscAtmIfUniSigRowStatusEntry .1.3.6.1.4.1.562.36.2.1.114.6.3.1 |
mscAtmIfUniSigRowStatusEntryA single entry in the table represents a single
mscAtmIfUniSig component. MscAtmIfUniSigRowStatusEntry .1.3.6.1.4.1.562.36.2.1.114.6.3.1.1 |
mscAtmIfUniSigRowStatusThis variable is used as the basis for SNMP naming of
mscAtmIfUniSig components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.6.3.1.1.1 |
mscAtmIfUniSigComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.6.3.1.1.2 |
mscAtmIfUniSigStorageTypeThis variable represents the storage type value for the
mscAtmIfUniSig tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.6.3.1.1.4 |
mscAtmIfUniSigIndexThis variable represents the index for the mscAtmIfUniSig tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.114.6.3.1.1.10 |
mscAtmIfUniSigVcd OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.114.6.3.2 |
mscAtmIfUniSigVcdRowStatusTableThis entry controls the addition and deletion of
mscAtmIfUniSigVcd components. SEQUENCE OF MscAtmIfUniSigVcdRowStatusEntry .1.3.6.1.4.1.562.36.2.1.114.6.3.2.1 |
mscAtmIfUniSigVcdRowStatusEntryA single entry in the table represents a single
mscAtmIfUniSigVcd component. MscAtmIfUniSigVcdRowStatusEntry .1.3.6.1.4.1.562.36.2.1.114.6.3.2.1.1 |
mscAtmIfUniSigVcdRowStatusThis variable is used as the basis for SNMP naming of
mscAtmIfUniSigVcd components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.6.3.2.1.1.1 |
mscAtmIfUniSigVcdComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.6.3.2.1.1.2 |
mscAtmIfUniSigVcdStorageTypeThis variable represents the storage type value for the
mscAtmIfUniSigVcd tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.6.3.2.1.1.4 |
mscAtmIfUniSigVcdIndexThis variable represents the index for the mscAtmIfUniSigVcd tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.114.6.3.2.1.1.10 |
mscAtmIfUniSigVcdProvTableThis group contains the provisionable traffic attributes for a control
channel. SEQUENCE OF MscAtmIfUniSigVcdProvEntry .1.3.6.1.4.1.562.36.2.1.114.6.3.2.10 |
mscAtmIfUniSigVcdProvEntryAn entry in the mscAtmIfUniSigVcdProvTable. MscAtmIfUniSigVcdProvEntry .1.3.6.1.4.1.562.36.2.1.114.6.3.2.10.1 |
mscAtmIfUniSigVcdTrafficDescTypeThis attribute specifies the type of traffic management which is
applied to both the transmit and receive direction of this connection
as defined in the ATM Forum. The trafficDescType determines the
number and meaning of the parameters in the trafficDescParm
attribute.rw Enumeration .1.3.6.1.4.1.562.36.2.1.114.6.3.2.10.1.1 |
mscAtmIfUniSigVcdAtmServiceCategoryThis attribute specifies the ATM service category for both directions
of the connection.
The constantBitRate service category is intended for real time
applications, that is those requiring tightly constrained delay and
delay variation, as would be appropriate for voice and video
applications. The consistent availability of a fixed quantity of
bandwidth is considered appropriate for CBR service. Cells which
are delayed beyond the value specified by CellTransfer Delay are
assumed to be of significantly reduce value to the application.
The rtVariableBitRate service category is intended for real time
applications, that is those requiring tightly constrained delay and
delay variation, as would be appropriate for voice and video
applications. Sources are expected to transmit at a rate which varies
with time. Equivalently, the source can be described as 'bursty'.
Cells which are delayed beyond the value specified by CTD are
assumed to be of significantly reduced value to the application. Real
time VBR service may support statistical multiplexing of real time
sources.
The nrtVariableBitRate service category is intended for non-real
time applications which have bursty traffic characteristics and which
can be characterized in terms of a PCR, SCR, and MBS. For those
cells which are transferred within the traffic contract, the application
expects a low cell loss ratio. For all connections, it expects a bound
on the mean cell transfer delay. Non-real time VBR service may
support statistical multiplexing of connections.
The unspecifiedBitRate service is intended for non-real time
applications; that is, those not requiring tightly constrained delay
and delay variation. UBR sources are expected to be bursty. UBR
service supports a high degree of statistical multiplexing among
sources. UBR service does not specify traffic related service
guarantees. No numerical commitments are made with respect to
the cell loss ratio experienced by a UBR connection, or as to the
cell transfer delay experienced by cells on the connection.rw Enumeration .1.3.6.1.4.1.562.36.2.1.114.6.3.2.10.1.3 |
mscAtmIfUniSigVcdWeightThis attribute specifies an override for the weight of this unshaped
connection. This attribute is ignored for shaped connections, for
ABR connections, for connections on a CQC-based ATM FP and
basic VPTs.
When the value is set to sameAsCa, the weight is determined by the
weight policy attribute under the CA service category component
for all but standard VPT VCCs. For standard VPT VCCs, the
weight is determined by the VCC's service category, when the value
is set to sameAsCa.
When this attribute is set to a value from 1 to 4095, that value is
used for the weight policy of this connection relative to other
connections. For all but standard VPT VCCs, weight policy
determines the proportion of transit cell opportunities which are
allocated to this connection, compared to other connections in the
same service category. For standard VPT VCCs, weight policy
determines the proportion of transmit cell opportunities which are
allocated to this connection, compared to other connections
associated with the VPT.
When the value is set to upToQueueLimit, the weight policy is
limited only by the txQueueLimit.
VALUES (
0 = upToQueueLimit
65535 = sameAsCa
)rw Unsigned32 (0 | 1..4095 | 65535) .1.3.6.1.4.1.562.36.2.1.114.6.3.2.10.1.4 |
mscAtmIfUniSigVcdQosClassThis attribute specifies the quality of service for both the forward
and backward direction for this connection.
Class 1 supports a QOS that meets Service Class A performance
requirements (Circuit emulation, constant bit rate video).
Class 2 supports a QOS that meets Service Class B performance
requirements (Variable bit rate audio and video).
Class 3 supports a QOS that meets Service Class C performance
requirements (Connection-Oriented Data Transfer).
Class 4 supports a QOS that meets Service Class D performance
requirements (Connectionless Data Transfer).
Class 0 is the unspecified bit rate QOS class; no objective is
specified for the performance parameters.rw Enumeration .1.3.6.1.4.1.562.36.2.1.114.6.3.2.10.1.21 |
mscAtmIfUniSigVcdTrafficShapingThis attribute specifies whether this connection uses traffic shaping
when transmitting traffic to the ATM interface.
When sameAsCa is selected, traffic shaping for this connection is
based on the trafficShaping attribute of the connection's service
category component under the AtmIf CA. If the service category has
traffic shaping enabled, then traffic shaping is enabled for the
connection. Note that enabling traffic shaping may have no effect
under certain cases. These cases are listed in the description of the
trafficShaping operational attribute, which is under the Vcc Tm and
Vpc Tm components.
When disabled is selected, traffic shaping for this connection is
disabled.rw Enumeration .1.3.6.1.4.1.562.36.2.1.114.6.3.2.10.1.50 |
mscAtmIfUniSigVcdUnshapedTransmitQueueingThis attribute only applies when this connection is unshaped. This
attribute specifies the transmit queueing method for this connection
if it is unshaped. Refer to the unshapedTransmitQueueing attribute
under the AtmIf CA service category subcomponent for more details
on the meaning of this attribute.
When this attribute is set to sameAsCa, the transmit queueing
method for the connection is based on the
unshapedTransmitQueueing attribute of the connection's service
category component under the ConnectionAdministrator.
When this attribute is set to common, transmit traffic on this
unshaped connection is destined for the common queue.
The value sameAsInterface is for migration from previous software
releases, but should no longer be usedrw Enumeration .1.3.6.1.4.1.562.36.2.1.114.6.3.2.10.1.60 |
mscAtmIfUniSigVcdUsageParameterControlThis attribute specifies whether this connection enforces usage
parameter control when receiving traffic from the ATM interface.
When sameAsCa is selected, UPC for the connection is based on
the usageParameterControl attribute of the connection's service
category component under the ConnectionAdministrator. If the
service category has UPC enabled, then UPC is enabled for the
connection. Note that enabling UPC may have no effect under
certain cases. These cases are listed in the description of the
usageParameterControl operational attribute, which is under the
Vcc Tm or Vpc Tm component.
When disabled is selected, UPC for this connection is disabled.
The value sameAsInterface is for migration from previous software
releases, but should no longer be usedrw Enumeration .1.3.6.1.4.1.562.36.2.1.114.6.3.2.10.1.70 |
mscAtmIfUniSigVcdTdpTableThis attribute is a vector of five traffic parameters whose meanings
are defined by the trafficDescType attribute. The values of peak cell
rate (PCR), sustained cell rate (SCR) and requested shaping rate are
expressed in cell/s. Maximum burst size (MBS) is expressed in
cells. CDVT is expressed in microseconds. The values of PCR,
SCR, MBS and CDVT are used for connection admission control
(CAC). The value of CDVT is only used for connections where the
atmServiceCategory is constantBitRate. For all other values of
atmServiceCategory, CDVT is ignored. The values of PCR, SCR
and requested shaping rate are used to determine the actual shaping
rate where traffic shaping is enabled.
When trafficDescType is 3, parameter 1 represents the PCR for CLP
equal to 0 and 1 traffic; parameter 4 represents the CDVT; and
parameter 5 represents the requested shaping rate. A non-zero value
in parameter 5 overrides any value in parameter 1. This result is
used as the PCR. Parameter 1 must be non-zero. Parameters 2 and 3
must be zero.
When trafficDescType is 6, parameter 1 represents the PCR for CLP
equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP
equal to 0 and 1 traffic; parameter 3 represents the MBS for CLP
equal to 0 and 1 traffic; parameter 4 represents the CDVT; and
parameter 5 represents the requested shaping rate. A non-zero value
in parameter 5 overrides any value in parameter 1. This result is
used as the PCR. Parameters 1, 2, and 3 must be non-zero.
Parameter 1 must be greater than or equal to parameter 2. Parameter
5 must either be zero (unused) or greater than or equal to parameter
2.
When trafficDescType is 7, parameter 1 represents the PCR for CLP
equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP
equal to 0 with cell discard; parameter 3 represents the MBS for
CLP equal to 0 traffic; parameter 4 represents the CDVT; and
parameter 5 represents the requested shaping rate. A non-zero value
in parameter 5 overrides any value in parameter 1. This result is
used as the PCR. Parameters 1, 2, and 3 must be non-zero.
Parameter 1 must be greater than or equal to parameter 2. Parameter
5 must either be zero (unused) or greater than or equal to parameter
2.
When trafficDescType is 8, parameter 1 represents the PCR for CLP
equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP
equal to 0 traffic with cell tagging; parameter 3 represents the MBS
for CLP equal to 0 traffic; parameter 4 represents the CDVT; and
parameter 5 represents the requested shaping rate. A non-zero value
in parameter 5 overrides any value in parameter 1. This result is
used as the PCR. Parameters 1, 2, and 3 must be non-zero.
Parameter 1 must be greater than or equal to parameter 2. Parameter
5 must either be zero (unused) or greater than or equal to parameter
2.
Whenever it is valid for PCR to be specified, parameter 5 may also
be used to specify a requested shaping rate. A non-zero value in
parameter 5 overrides the value in parameter 1 and is used as the
peak cell rate in calculations of CAC and shaping rate.
For trafficDescType 3 the traffic is shaped at the next rate less than
the PCR.
For trafficDescType 6, 7, and 8, the traffic is shaped at the highest
available rate which is between PCR and SCR. However, if there is
no available shaping rate between PCR and SCR, traffic is shaped at
the next rate above the PCR. SEQUENCE OF MscAtmIfUniSigVcdTdpEntry .1.3.6.1.4.1.562.36.2.1.114.6.3.2.387 |
mscAtmIfUniSigVcdTdpEntryAn entry in the mscAtmIfUniSigVcdTdpTable. MscAtmIfUniSigVcdTdpEntry .1.3.6.1.4.1.562.36.2.1.114.6.3.2.387.1 |
mscAtmIfUniSigVcdTdpIndexThis variable represents the mscAtmIfUniSigVcdTdpTable
specific index for the mscAtmIfUniSigVcdTdpTable. Integer32 .1.3.6.1.4.1.562.36.2.1.114.6.3.2.387.1.1 |
mscAtmIfUniSigVcdTdpValueThis variable represents an individual value for the
mscAtmIfUniSigVcdTdpTable.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.114.6.3.2.387.1.2 |
mscAtmIfUniSigProvTableThis attribute group contains the provisionable attributes for the
Signalling component. SEQUENCE OF MscAtmIfUniSigProvEntry .1.3.6.1.4.1.562.36.2.1.114.6.3.10 |
mscAtmIfUniSigProvEntryAn entry in the mscAtmIfUniSigProvTable. MscAtmIfUniSigProvEntry .1.3.6.1.4.1.562.36.2.1.114.6.3.10.1 |
mscAtmIfUniSigVciThis attribute specifies the signalling channel number.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.114.6.3.10.1.1 |
mscAtmIfUniSigAddressConversionThis attribute specifies the address conversion on the outgoing
signalling PDUs. The options are none, nativeE164, or nsap. The
none option is the default and if this option is chosen then nothing
is done to the address information element (IE) in the outgoing
signalling message. If nativeE164 option is chosen, then only
NSAP encapsulated E.164 addresses with zeros in the ESI are
converted to native E.164 format in the outgoing signalling
message. If the NSAP address is not encapsulated E.164 or the ESI
field is not zeros and the nativeE164 option is chosen, then the call
is cleared. If the nsap option is chosen, then native E.164 addresses
are converted to NSAP E.164 with zeros in the ESI field; otherwise
the address is in NSAP format and is not changed.rw Enumeration .1.3.6.1.4.1.562.36.2.1.114.6.3.10.1.2 |
mscAtmIfUniSigOperatingModeThis attribute specifies the operating mode of the signaling channel.
provisionedOnly indicates that only SPVCs and SPVPs are
supported on the interface and SVCs are not supported. This value
is permitted only on UNI interfaces.
normal indicates that SVCs, SPVCs, and SPVPs are supported on
the interface.rw Enumeration .1.3.6.1.4.1.562.36.2.1.114.6.3.10.1.3 |
mscAtmIfUniSigStateTableThis group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. SEQUENCE OF MscAtmIfUniSigStateEntry .1.3.6.1.4.1.562.36.2.1.114.6.3.11 |
mscAtmIfUniSigStateEntryAn entry in the mscAtmIfUniSigStateTable. MscAtmIfUniSigStateEntry .1.3.6.1.4.1.562.36.2.1.114.6.3.11.1 |
mscAtmIfUniSigAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.114.6.3.11.1.1 |
mscAtmIfUniSigOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.ro Enumeration .1.3.6.1.4.1.562.36.2.1.114.6.3.11.1.2 |
mscAtmIfUniSigUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.ro Enumeration .1.3.6.1.4.1.562.36.2.1.114.6.3.11.1.3 |
mscAtmIfUniSigOperTableThis attribute contains the operational attributes for the
AtmSignalling component. SEQUENCE OF MscAtmIfUniSigOperEntry .1.3.6.1.4.1.562.36.2.1.114.6.3.12 |
mscAtmIfUniSigOperEntryAn entry in the mscAtmIfUniSigOperTable. MscAtmIfUniSigOperEntry .1.3.6.1.4.1.562.36.2.1.114.6.3.12.1 |
mscAtmIfUniSigLastTxCauseCodeThis attribute indicates the cause code in the last transmitted
signalling message that contains the CAUSE information element.
The cause code is used to describe the reason for generating certain
signalling messages.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.114.6.3.12.1.1 |
mscAtmIfUniSigLastTxDiagCodeThis attribute contains the diagnostic code in the last transmitted
signalling message. The diagnostic code is contained in the CAUSE
information element and identifies an information element type or
timer type. The diagnostic code is present only if a procedural error
is detected by the signalling protocol. A diagnostic code is always
accompanied by the cause code. If there is no failure, this attribute
is set to 0.ro Hex .1.3.6.1.4.1.562.36.2.1.114.6.3.12.1.2 |
mscAtmIfUniSigLastRxCauseCodeThis attribute contains the cause code in the last received signalling
message that contains the CAUSE information element. The cause
code is used to describe the reason for generating certain signalling
messages.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.114.6.3.12.1.3 |
mscAtmIfUniSigLastRxDiagCodeThis attribute contains the diagnostic code in the last received
signalling message. The diagnostic code is contained in the CAUSE
information element and identifies an information element type or
timer type. The diagnostic code is present only if a procedural error
is detected by the signalling protocol. A diagnostic code is always
accompanied by the cause code. If there is no failure, this attribute
is set to 0.ro Hex .1.3.6.1.4.1.562.36.2.1.114.6.3.12.1.4 |
mscAtmIfUniSigStatsTableThis attribute group contains the statistics associated with the
AtmSignalling component. SEQUENCE OF MscAtmIfUniSigStatsEntry .1.3.6.1.4.1.562.36.2.1.114.6.3.13 |
mscAtmIfUniSigStatsEntryAn entry in the mscAtmIfUniSigStatsTable. MscAtmIfUniSigStatsEntry .1.3.6.1.4.1.562.36.2.1.114.6.3.13.1 |
mscAtmIfUniSigCurrentConnectionsThis attribute indicates the total number of currently active
connections.roobsolete Counter32 .1.3.6.1.4.1.562.36.2.1.114.6.3.13.1.1 |
mscAtmIfUniSigPeakConnectionsThis attribute indicates the high water mark of active point-to-
point and point-to-multipoint connections.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.114.6.3.13.1.2 |
mscAtmIfUniSigSuccessfulConnectionsThis attribute counts the total number of switched point-to-
point and point-to-multipoint connections that were successfully
established. The counter wraps to 0 when the maximum value is
exceeded.ro Counter32 .1.3.6.1.4.1.562.36.2.1.114.6.3.13.1.3 |
mscAtmIfUniSigFailedConnectionsThis attribute counts the total number of switched connections that
were not successfully established.The counter wraps to 0 when the
maximum value is exceeded.ro Counter32 .1.3.6.1.4.1.562.36.2.1.114.6.3.13.1.4 |
mscAtmIfUniSigTxPdusThis attribute counts the number of transmitted signalling
PDUs.The counter wraps to 0 when the maximum value is
exceeded.ro Counter32 .1.3.6.1.4.1.562.36.2.1.114.6.3.13.1.5 |
mscAtmIfUniSigRxPdusThis attribute counts the number of received signalling PDUs.The
counter wraps to 0 when the maximum value is exceeded.ro Counter32 .1.3.6.1.4.1.562.36.2.1.114.6.3.13.1.6 |
mscAtmIfUniSigCurrentPmpConnectionsThis attribute indicates the number of currently active point-to-
multipoint connections.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.114.6.3.13.1.7 |
mscAtmIfUniSigPeakPmpConnectionsThis attribute indicates the high water mark of active point-to-
multipoint connections.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.114.6.3.13.1.8 |
mscAtmIfUniSigSuccessfulPmpConnectionsThis attribute counts the total number of switched point-to-
multipoint connections that were successfully established.
The counter wraps to 0 when the maximum value is
exceeded.ro Counter32 .1.3.6.1.4.1.562.36.2.1.114.6.3.13.1.9 |
mscAtmIfUniSigFailedPmpConnectionsThis attribute counts the number of switched point-to-
multipoint connections that were not successfully
established.The counter wraps to 0 when the maximum value
is exceeded.ro Counter32 .1.3.6.1.4.1.562.36.2.1.114.6.3.13.1.10 |
mscAtmIfUniSigNewCurrentConnectionsThis attribute indicates the total number of currently active point-to-
point and point-to-multipoint connections.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.114.6.3.13.1.11 |
mscAtmIfUniAddr OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.114.6.4 |
mscAtmIfUniAddrRowStatusTableThis entry controls the addition and deletion of
mscAtmIfUniAddr components. SEQUENCE OF MscAtmIfUniAddrRowStatusEntry .1.3.6.1.4.1.562.36.2.1.114.6.4.1 |
mscAtmIfUniAddrRowStatusEntryA single entry in the table represents a single
mscAtmIfUniAddr component. MscAtmIfUniAddrRowStatusEntry .1.3.6.1.4.1.562.36.2.1.114.6.4.1.1 |
mscAtmIfUniAddrRowStatusThis variable is used as the basis for SNMP naming of
mscAtmIfUniAddr components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.6.4.1.1.1 |
mscAtmIfUniAddrComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.6.4.1.1.2 |
mscAtmIfUniAddrStorageTypeThis variable represents the storage type value for the
mscAtmIfUniAddr tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.6.4.1.1.4 |
mscAtmIfUniAddrAddressIndexThis variable represents an index for the mscAtmIfUniAddr tables. AsciiStringIndex .1.3.6.1.4.1.562.36.2.1.114.6.4.1.1.10 |
mscAtmIfUniAddrAddressTypeIndexThis variable represents an index for the mscAtmIfUniAddr tables. Enumeration .1.3.6.1.4.1.562.36.2.1.114.6.4.1.1.11 |
mscAtmIfUniAddrTermSP OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.114.6.4.2 |
mscAtmIfUniAddrTermSPRowStatusTableThis entry controls the addition and deletion of
mscAtmIfUniAddrTermSP components. SEQUENCE OF MscAtmIfUniAddrTermSPRowStatusEntry .1.3.6.1.4.1.562.36.2.1.114.6.4.2.1 |
mscAtmIfUniAddrTermSPRowStatusEntryA single entry in the table represents a single
mscAtmIfUniAddrTermSP component. MscAtmIfUniAddrTermSPRowStatusEntry .1.3.6.1.4.1.562.36.2.1.114.6.4.2.1.1 |
mscAtmIfUniAddrTermSPRowStatusThis variable is used as the basis for SNMP naming of
mscAtmIfUniAddrTermSP components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.6.4.2.1.1.1 |
mscAtmIfUniAddrTermSPComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.6.4.2.1.1.2 |
mscAtmIfUniAddrTermSPStorageTypeThis variable represents the storage type value for the
mscAtmIfUniAddrTermSP tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.6.4.2.1.1.4 |
mscAtmIfUniAddrTermSPIndexThis variable represents the index for the mscAtmIfUniAddrTermSP tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.114.6.4.2.1.1.10 |
mscAtmIfUniAddrPnniInfo OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.114.6.4.3 |
mscAtmIfUniAddrPnniInfoRowStatusTableThis entry controls the addition and deletion of
mscAtmIfUniAddrPnniInfo components. SEQUENCE OF MscAtmIfUniAddrPnniInfoRowStatusEntry .1.3.6.1.4.1.562.36.2.1.114.6.4.3.1 |
mscAtmIfUniAddrPnniInfoRowStatusEntryA single entry in the table represents a single
mscAtmIfUniAddrPnniInfo component. MscAtmIfUniAddrPnniInfoRowStatusEntry .1.3.6.1.4.1.562.36.2.1.114.6.4.3.1.1 |
mscAtmIfUniAddrPnniInfoRowStatusThis variable is used as the basis for SNMP naming of
mscAtmIfUniAddrPnniInfo components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.6.4.3.1.1.1 |
mscAtmIfUniAddrPnniInfoComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.6.4.3.1.1.2 |
mscAtmIfUniAddrPnniInfoStorageTypeThis variable represents the storage type value for the
mscAtmIfUniAddrPnniInfo tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.6.4.3.1.1.4 |
mscAtmIfUniAddrPnniInfoIndexThis variable represents the index for the mscAtmIfUniAddrPnniInfo tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.114.6.4.3.1.1.10 |
mscAtmIfUniAddrPnniInfoProvTableThis attribute group contains the provisioned attributes relating to
PNNI for a PnniInfo component. SEQUENCE OF MscAtmIfUniAddrPnniInfoProvEntry .1.3.6.1.4.1.562.36.2.1.114.6.4.3.10 |
mscAtmIfUniAddrPnniInfoProvEntryAn entry in the mscAtmIfUniAddrPnniInfoProvTable. MscAtmIfUniAddrPnniInfoProvEntry .1.3.6.1.4.1.562.36.2.1.114.6.4.3.10.1 |
mscAtmIfUniAddrPnniInfoScopeThis attribute specifies the scope of the ATM address, which is the
highest level up to which this address will be advertised in the
PNNI hierarchy. The scope must be set to a value numerically less
than or equal to the level of the lowest level peer group containing
this node. Setting the scope to 0 will cause the address to be
advertised globally within this PNNI routing domain.rw INTEGER (-1..104) .1.3.6.1.4.1.562.36.2.1.114.6.4.3.10.1.1 |
mscAtmIfUniAddrPnniInfoReachabilityThis attribute indicates whether the address is internal or exterior.
An internal reachable address is an address of a destination that is
directly attached to the logical node advertising the address. An
exterior reachable address is an address that can be reached
through a PNNI routing domain, but which is not located in that
PNNI routing domain.rw Enumeration .1.3.6.1.4.1.562.36.2.1.114.6.4.3.10.1.2 |
mscAtmIfUniAddrOperTableThis attribute group contains the operational attributes for the
Address component. SEQUENCE OF MscAtmIfUniAddrOperEntry .1.3.6.1.4.1.562.36.2.1.114.6.4.10 |
mscAtmIfUniAddrOperEntryAn entry in the mscAtmIfUniAddrOperTable. MscAtmIfUniAddrOperEntry .1.3.6.1.4.1.562.36.2.1.114.6.4.10.1 |
mscAtmIfUniAddrScopeThis attribute indicates the scope of the ATM address, which is the
highest level to which this address will be advertised in the PNNI
hierarchy. If no PnniInfo subcomponent has been provisioned, then
the scope will default to the level of this node in the PNNI
hierarchy. If this node does not participate in a PNNI hierarchy, then
this attribute will have the value of -1.ro INTEGER (-1..104) .1.3.6.1.4.1.562.36.2.1.114.6.4.10.1.1 |
mscAtmIfUniAddrReachabilityThis attribute indicates whether the address is internal or exterior.
An internal reachable address is an address of a destination that is
directly attached to the logical node advertising the address. An
exterior reachable address is an address that can be reached
through a PNNI routing domain, but which is not located in that
PNNI routing domain.ro Enumeration .1.3.6.1.4.1.562.36.2.1.114.6.4.10.1.2 |
mscAtmIfUniCallingAScr OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.114.6.5 |
mscAtmIfUniCallingAScrRowStatusTableThis entry controls the addition and deletion of
mscAtmIfUniCallingAScr components. SEQUENCE OF MscAtmIfUniCallingAScrRowStatusEntry .1.3.6.1.4.1.562.36.2.1.114.6.5.1 |
mscAtmIfUniCallingAScrRowStatusEntryA single entry in the table represents a single
mscAtmIfUniCallingAScr component. MscAtmIfUniCallingAScrRowStatusEntry .1.3.6.1.4.1.562.36.2.1.114.6.5.1.1 |
mscAtmIfUniCallingAScrRowStatusThis variable is used as the basis for SNMP naming of
mscAtmIfUniCallingAScr components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.6.5.1.1.1 |
mscAtmIfUniCallingAScrComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.6.5.1.1.2 |
mscAtmIfUniCallingAScrStorageTypeThis variable represents the storage type value for the
mscAtmIfUniCallingAScr tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.6.5.1.1.4 |
mscAtmIfUniCallingAScrIndexThis variable represents the index for the mscAtmIfUniCallingAScr tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.114.6.5.1.1.10 |
mscAtmIfUniCallingAScrAddr OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.114.6.5.2 |
mscAtmIfUniCallingAScrAddrRowStatusTableThis entry controls the addition and deletion of
mscAtmIfUniCallingAScrAddr components. SEQUENCE OF MscAtmIfUniCallingAScrAddrRowStatusEntry .1.3.6.1.4.1.562.36.2.1.114.6.5.2.1 |
mscAtmIfUniCallingAScrAddrRowStatusEntryA single entry in the table represents a single
mscAtmIfUniCallingAScrAddr component. MscAtmIfUniCallingAScrAddrRowStatusEntry .1.3.6.1.4.1.562.36.2.1.114.6.5.2.1.1 |
mscAtmIfUniCallingAScrAddrRowStatusThis variable is used as the basis for SNMP naming of
mscAtmIfUniCallingAScrAddr components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.6.5.2.1.1.1 |
mscAtmIfUniCallingAScrAddrComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.6.5.2.1.1.2 |
mscAtmIfUniCallingAScrAddrStorageTypeThis variable represents the storage type value for the
mscAtmIfUniCallingAScrAddr tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.6.5.2.1.1.4 |
mscAtmIfUniCallingAScrAddrAddressIndexThis variable represents an index for the mscAtmIfUniCallingAScrAddr tables. AsciiStringIndex .1.3.6.1.4.1.562.36.2.1.114.6.5.2.1.1.10 |
mscAtmIfUniCallingAScrAddrAddressActionIndexThis variable represents an index for the mscAtmIfUniCallingAScrAddr tables. Enumeration .1.3.6.1.4.1.562.36.2.1.114.6.5.2.1.1.11 |
mscAtmIfUniCallingAScrProvTableThis attribute group contains the provisionable attributes for the
CallingAScr component. SEQUENCE OF MscAtmIfUniCallingAScrProvEntry .1.3.6.1.4.1.562.36.2.1.114.6.5.10 |
mscAtmIfUniCallingAScrProvEntryAn entry in the mscAtmIfUniCallingAScrProvTable. MscAtmIfUniCallingAScrProvEntry .1.3.6.1.4.1.562.36.2.1.114.6.5.10.1 |
mscAtmIfUniCallingAScrAdminStatusThis attribute specifies whether the calling address screening feature
is enabled or disabled.
If enabled, incoming SVC calls are screened against provisioned
addresses. If enabled and the calling address in the ATM SVC call
request is provisioned to be accepted, the call is accepted or rejected
according to the action specified for that address. If the value is
enabled, and the calling address in the address request is not
provisioned, the call is rejected
If the value is disabled, no calling address screening is performed.rw Enumeration .1.3.6.1.4.1.562.36.2.1.114.6.5.10.1.1 |
mscAtmIfUniCallingAScrDefaultInsertionAddressThis attribute specifies the address to be inserted into the SVC
connection request if adminStatus is enabled and the connection
request does not contain a calling address. If the adminStatus
attribute is enabled and this attribute is empty, all incoming SVC
calls which do not contain a calling address are rejected.rw HexString .1.3.6.1.4.1.562.36.2.1.114.6.5.10.1.2 |
mscAtmIfUniCallingAScrStatTableThis attribute group contains statistics related to the incoming SVC
call requests received while the adminStatus attribute is set to
enabled. SEQUENCE OF MscAtmIfUniCallingAScrStatEntry .1.3.6.1.4.1.562.36.2.1.114.6.5.11 |
mscAtmIfUniCallingAScrStatEntryAn entry in the mscAtmIfUniCallingAScrStatTable. MscAtmIfUniCallingAScrStatEntry .1.3.6.1.4.1.562.36.2.1.114.6.5.11.1 |
mscAtmIfUniCallingAScrAcceptedCallsThis attribute counts the incoming SVC calls which were accepted
because the address specified in the call request matched a
provisioned ATM address and the associated action was accept.
When the counter exceeds the maximum, it wraps to 0.ro Counter32 .1.3.6.1.4.1.562.36.2.1.114.6.5.11.1.1 |
mscAtmIfUniCallingAScrRejectedCallsThis attribute counts the incoming SVC calls which were rejected
because the address specified in the call request matched a
provisioned ATM address, but the associated action was reject.
When the counter exceeds the maximum, it wraps to 0.ro Counter32 .1.3.6.1.4.1.562.36.2.1.114.6.5.11.1.2 |
mscAtmIfUniCallingAScrUnmatchedCallsThis attribute counts the incoming SVC calls which were rejected
because none of the provisioned ATM addresses matched the
applicable address in the incoming SVC call request.
When the counter exceeds the maximum, it wraps to 0.ro Counter32 .1.3.6.1.4.1.562.36.2.1.114.6.5.11.1.3 |
mscAtmIfUniCalledAScr OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.114.6.6 |
mscAtmIfUniCalledAScrRowStatusTableThis entry controls the addition and deletion of
mscAtmIfUniCalledAScr components. SEQUENCE OF MscAtmIfUniCalledAScrRowStatusEntry .1.3.6.1.4.1.562.36.2.1.114.6.6.1 |
mscAtmIfUniCalledAScrRowStatusEntryA single entry in the table represents a single
mscAtmIfUniCalledAScr component. MscAtmIfUniCalledAScrRowStatusEntry .1.3.6.1.4.1.562.36.2.1.114.6.6.1.1 |
mscAtmIfUniCalledAScrRowStatusThis variable is used as the basis for SNMP naming of
mscAtmIfUniCalledAScr components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.6.6.1.1.1 |
mscAtmIfUniCalledAScrComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.6.6.1.1.2 |
mscAtmIfUniCalledAScrStorageTypeThis variable represents the storage type value for the
mscAtmIfUniCalledAScr tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.6.6.1.1.4 |
mscAtmIfUniCalledAScrIndexThis variable represents the index for the mscAtmIfUniCalledAScr tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.114.6.6.1.1.10 |
mscAtmIfUniCalledAScrAddr OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.114.6.6.2 |
mscAtmIfUniCalledAScrAddrRowStatusTableThis entry controls the addition and deletion of
mscAtmIfUniCalledAScrAddr components. SEQUENCE OF MscAtmIfUniCalledAScrAddrRowStatusEntry .1.3.6.1.4.1.562.36.2.1.114.6.6.2.1 |
mscAtmIfUniCalledAScrAddrRowStatusEntryA single entry in the table represents a single
mscAtmIfUniCalledAScrAddr component. MscAtmIfUniCalledAScrAddrRowStatusEntry .1.3.6.1.4.1.562.36.2.1.114.6.6.2.1.1 |
mscAtmIfUniCalledAScrAddrRowStatusThis variable is used as the basis for SNMP naming of
mscAtmIfUniCalledAScrAddr components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.6.6.2.1.1.1 |
mscAtmIfUniCalledAScrAddrComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.6.6.2.1.1.2 |
mscAtmIfUniCalledAScrAddrStorageTypeThis variable represents the storage type value for the
mscAtmIfUniCalledAScrAddr tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.6.6.2.1.1.4 |
mscAtmIfUniCalledAScrAddrAddressIndexThis variable represents an index for the mscAtmIfUniCalledAScrAddr tables. AsciiStringIndex .1.3.6.1.4.1.562.36.2.1.114.6.6.2.1.1.10 |
mscAtmIfUniCalledAScrAddrAddressActionIndexThis variable represents an index for the mscAtmIfUniCalledAScrAddr tables. Enumeration .1.3.6.1.4.1.562.36.2.1.114.6.6.2.1.1.11 |
mscAtmIfUniCalledAScrProvTableThis attribute group contains the provisionable attributes for the
CalledAScr component. SEQUENCE OF MscAtmIfUniCalledAScrProvEntry .1.3.6.1.4.1.562.36.2.1.114.6.6.10 |
mscAtmIfUniCalledAScrProvEntryAn entry in the mscAtmIfUniCalledAScrProvTable. MscAtmIfUniCalledAScrProvEntry .1.3.6.1.4.1.562.36.2.1.114.6.6.10.1 |
mscAtmIfUniCalledAScrAdminStatusThis attribute specifies whether the called address screening feature
is enabled or disabled.
If the value is enabled, incoming SVC calls will be screened against
provisioned called addresses. If the value is enabled and the called
address in the ATM SVC call request has been provisioned, the call
is accepted or rejected according to the action specified for that
address. If the value is enabled and the called address in the call
request is not provisioned, the call is rejected.
If the value is disabled, no called address screening is performed.rw Enumeration .1.3.6.1.4.1.562.36.2.1.114.6.6.10.1.1 |
mscAtmIfUniCalledAScrStatTableThis attribute group contains statistics related to the incoming SVC
call requests received while the adminStatus attribute is set to
enabled. SEQUENCE OF MscAtmIfUniCalledAScrStatEntry .1.3.6.1.4.1.562.36.2.1.114.6.6.11 |
mscAtmIfUniCalledAScrStatEntryAn entry in the mscAtmIfUniCalledAScrStatTable. MscAtmIfUniCalledAScrStatEntry .1.3.6.1.4.1.562.36.2.1.114.6.6.11.1 |
mscAtmIfUniCalledAScrAcceptedCallsThis attribute counts the incoming SVC calls which were accepted
because the address specified in the call request matched a
provisioned ATM address and the associated action was accept.
When the counter exceeds the maximum, it wraps to 0.ro Counter32 .1.3.6.1.4.1.562.36.2.1.114.6.6.11.1.1 |
mscAtmIfUniCalledAScrRejectedCallsThis attribute counts the incoming SVC calls which were rejected
because the address specified in the call request matched a
provisioned ATM address, but the associated action was reject.
When the counter exceeds the maximum, it wraps to 0.ro Counter32 .1.3.6.1.4.1.562.36.2.1.114.6.6.11.1.2 |
mscAtmIfUniCalledAScrUnmatchedCallsThis attribute counts the incoming SVC calls which were rejected
because none of the provisioned ATM addresses matched the
applicable address in the incoming SVC call request.
When the counter exceeds the maximum, it wraps to 0.ro Counter32 .1.3.6.1.4.1.562.36.2.1.114.6.6.11.1.3 |
mscAtmIfUniProvTableThis group contains the provisionable attributes for the Uni
component. SEQUENCE OF MscAtmIfUniProvEntry .1.3.6.1.4.1.562.36.2.1.114.6.10 |
mscAtmIfUniProvEntryAn entry in the mscAtmIfUniProvTable. MscAtmIfUniProvEntry .1.3.6.1.4.1.562.36.2.1.114.6.10.1 |
mscAtmIfUniVersionThis attribute specifies which specification the UNI complies with.
The options are ATM FORUM 3.0, ATM FORUM 3.1 or ATM
FORUM 4.0. If this attribute is changed then all switched Vcc
components in this interface are cleared due to the fact that the two
versions are incompatible.rw Enumeration .1.3.6.1.4.1.562.36.2.1.114.6.10.1.1 |
mscAtmIfUniSideThis attribute indicates which side the interface is, user or network.rw Enumeration .1.3.6.1.4.1.562.36.2.1.114.6.10.1.2 |
mscAtmIfUniSoftPvcRetryPeriodThis attribute represents the time in seconds to wait between call set
up retries. The resolution is to the nearest 10 seconds.
This attribute has been obsoleted and is replaced by the
softPvpAndPvcRetryPeriod attribute.rwobsolete Unsigned32 .1.3.6.1.4.1.562.36.2.1.114.6.10.1.3 |
mscAtmIfUniSoftPvpAndPvcRetryPeriodThis attribute represents the time in seconds to wait between soft
PVP or soft PVC call setup retries. The resolution is to the nearest
10 seconds.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.114.6.10.1.4 |
mscAtmIfUniSoftPvpAndPvcHoldOffTimeThis attribute specifies how long to hold off retries following a
release or the connection. The resolution is to the nearest 50 ms.rw Unsigned32 (0 | 50..20000) .1.3.6.1.4.1.562.36.2.1.114.6.10.1.5 |
mscAtmIfUniLoopPreventionThis attribute specifies whether loop prevention is in effect on this
interface.
When the value is enabled, incoming calls on this interface cannot
be routed back out the same interface. When the value is disabled,
routing of incoming calls back out the same interface is permitted.
The recommended value is enabled. The value disabled should
only be used if routing of incoming calls back out over this interface
is actually required. As an example, the value disabled might be
needed if the interface is connected to an end-user multiplexing
device which has no routing capability.
Note that setting the value to enabled prevents only routing loops
which involve two network nodes.rw Enumeration .1.3.6.1.4.1.562.36.2.1.114.6.10.1.6 |
mscAtmIfUniOperTableThis attribute group contains the operational attributes for the Uni
component. SEQUENCE OF MscAtmIfUniOperEntry .1.3.6.1.4.1.562.36.2.1.114.6.11 |
mscAtmIfUniOperEntryAn entry in the mscAtmIfUniOperTable. MscAtmIfUniOperEntry .1.3.6.1.4.1.562.36.2.1.114.6.11.1 |
mscAtmIfUniMacAddressThis attribute indicates the MAC address of the port, which is used
for address registration of the user side as the default ESI.ro AsciiString .1.3.6.1.4.1.562.36.2.1.114.6.11.1.1 |
mscAtmIfUniAcctOptTableThis group contains the provisionable attributes for accounting. SEQUENCE OF MscAtmIfUniAcctOptEntry .1.3.6.1.4.1.562.36.2.1.114.6.12 |
mscAtmIfUniAcctOptEntryAn entry in the mscAtmIfUniAcctOptTable. MscAtmIfUniAcctOptEntry .1.3.6.1.4.1.562.36.2.1.114.6.12.1 |
mscAtmIfUniAccountCollectionThis attribute is used to turn accounting on or off for SVC and
SPVC connections. It also specifies the reason(s) for which
accounting data is collected: billing, test, study, audit or force.
If the set of reasons is not empty then accounting records will be
generated by this interface in the following situations:
- on a TODA changeover if TODA is enabled;
- every 12 hours (per connection) if TODA is disabled;
- on every call clear (a call record with final cell counts).
If none of the reasons is present, then accounting will be
suppressed.
The reason for collection is recorded in the accounting record, in
the attribute callingCollectReason or calledCollectReason as
appropriate.
Description of bits:
bill(0)
test(1)
study(2)
audit(3)
force(4)rw OCTET STRING .1.3.6.1.4.1.562.36.2.1.114.6.12.1.1 |
mscAtmIfUniAccountConnectionTypeThis attribute specifies whether accounting records generated by
this interface should be marked as originating, terminating or
intermediate. This attribute, in combination with the direction of the
call, determines the value of attribute connPointType of the
accounting record and may be used by downstream accounting
processes to correlate the records.
If the value is origTerm then records generated for incoming calls
will be marked as originating and records generated for outgoing
calls will be marked as terminating.
If the value is intermediate then records generated for all calls will
be marked as intermediate.rw Enumeration .1.3.6.1.4.1.562.36.2.1.114.6.12.1.2 |
mscAtmIfUniAccountClassThis attribute specifies the accounting class associated with the
interface. Its meaning is determined by the network operator.
Its value is simply recorded in the accounting records generated by
this interface, in the attribute callingServiceType or
calledServiceType as appropriate.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.114.6.12.1.3 |
mscAtmIfUniServiceExchangeThis attribute specifies the data service exchange associated with
this interface. Its meaning is determined by the network operator.
Its value is simply recorded in the accounting records generated by
this interface, in the attribute callingDse or calledDse as
appropriate.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.114.6.12.1.4 |
mscAtmIfVptUni OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.114.9.8 |
mscAtmIfVptUniRowStatusTableThis entry controls the addition and deletion of
mscAtmIfVptUni components. SEQUENCE OF MscAtmIfVptUniRowStatusEntry .1.3.6.1.4.1.562.36.2.1.114.9.8.1 |
mscAtmIfVptUniRowStatusEntryA single entry in the table represents a single
mscAtmIfVptUni component. MscAtmIfVptUniRowStatusEntry .1.3.6.1.4.1.562.36.2.1.114.9.8.1.1 |
mscAtmIfVptUniRowStatusThis variable is used as the basis for SNMP naming of
mscAtmIfVptUni components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.9.8.1.1.1 |
mscAtmIfVptUniComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.9.8.1.1.2 |
mscAtmIfVptUniStorageTypeThis variable represents the storage type value for the
mscAtmIfVptUni tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.9.8.1.1.4 |
mscAtmIfVptUniIndexThis variable represents the index for the mscAtmIfVptUni tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.114.9.8.1.1.10 |
mscAtmIfVptUniSig OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.114.9.8.2 |
mscAtmIfVptUniSigRowStatusTableThis entry controls the addition and deletion of
mscAtmIfVptUniSig components. SEQUENCE OF MscAtmIfVptUniSigRowStatusEntry .1.3.6.1.4.1.562.36.2.1.114.9.8.2.1 |
mscAtmIfVptUniSigRowStatusEntryA single entry in the table represents a single
mscAtmIfVptUniSig component. MscAtmIfVptUniSigRowStatusEntry .1.3.6.1.4.1.562.36.2.1.114.9.8.2.1.1 |
mscAtmIfVptUniSigRowStatusThis variable is used as the basis for SNMP naming of
mscAtmIfVptUniSig components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.9.8.2.1.1.1 |
mscAtmIfVptUniSigComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.9.8.2.1.1.2 |
mscAtmIfVptUniSigStorageTypeThis variable represents the storage type value for the
mscAtmIfVptUniSig tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.9.8.2.1.1.4 |
mscAtmIfVptUniSigIndexThis variable represents the index for the mscAtmIfVptUniSig tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.114.9.8.2.1.1.10 |
mscAtmIfVptUniSigVcd OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.114.9.8.2.2 |
mscAtmIfVptUniSigVcdRowStatusTableThis entry controls the addition and deletion of
mscAtmIfVptUniSigVcd components. SEQUENCE OF MscAtmIfVptUniSigVcdRowStatusEntry .1.3.6.1.4.1.562.36.2.1.114.9.8.2.2.1 |
mscAtmIfVptUniSigVcdRowStatusEntryA single entry in the table represents a single
mscAtmIfVptUniSigVcd component. MscAtmIfVptUniSigVcdRowStatusEntry .1.3.6.1.4.1.562.36.2.1.114.9.8.2.2.1.1 |
mscAtmIfVptUniSigVcdRowStatusThis variable is used as the basis for SNMP naming of
mscAtmIfVptUniSigVcd components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.9.8.2.2.1.1.1 |
mscAtmIfVptUniSigVcdComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.9.8.2.2.1.1.2 |
mscAtmIfVptUniSigVcdStorageTypeThis variable represents the storage type value for the
mscAtmIfVptUniSigVcd tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.9.8.2.2.1.1.4 |
mscAtmIfVptUniSigVcdIndexThis variable represents the index for the mscAtmIfVptUniSigVcd tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.114.9.8.2.2.1.1.10 |
mscAtmIfVptUniSigVcdProvTableThis group contains the provisionable traffic attributes for a control
channel. SEQUENCE OF MscAtmIfVptUniSigVcdProvEntry .1.3.6.1.4.1.562.36.2.1.114.9.8.2.2.10 |
mscAtmIfVptUniSigVcdProvEntryAn entry in the mscAtmIfVptUniSigVcdProvTable. MscAtmIfVptUniSigVcdProvEntry .1.3.6.1.4.1.562.36.2.1.114.9.8.2.2.10.1 |
mscAtmIfVptUniSigVcdTrafficDescTypeThis attribute specifies the type of traffic management which is
applied to both the transmit and receive direction of this connection
as defined in the ATM Forum. The trafficDescType determines the
number and meaning of the parameters in the trafficDescParm
attribute.rw Enumeration .1.3.6.1.4.1.562.36.2.1.114.9.8.2.2.10.1.1 |
mscAtmIfVptUniSigVcdAtmServiceCategoryThis attribute specifies the ATM service category for both directions
of the connection.
The constantBitRate service category is intended for real time
applications, that is those requiring tightly constrained delay and
delay variation, as would be appropriate for voice and video
applications. The consistent availability of a fixed quantity of
bandwidth is considered appropriate for CBR service. Cells which
are delayed beyond the value specified by CellTransfer Delay are
assumed to be of significantly reduce value to the application.
The rtVariableBitRate service category is intended for real time
applications, that is those requiring tightly constrained delay and
delay variation, as would be appropriate for voice and video
applications. Sources are expected to transmit at a rate which varies
with time. Equivalently, the source can be described as 'bursty'.
Cells which are delayed beyond the value specified by CTD are
assumed to be of significantly reduced value to the application. Real
time VBR service may support statistical multiplexing of real time
sources.
The nrtVariableBitRate service category is intended for non-real
time applications which have bursty traffic characteristics and which
can be characterized in terms of a PCR, SCR, and MBS. For those
cells which are transferred within the traffic contract, the application
expects a low cell loss ratio. For all connections, it expects a bound
on the mean cell transfer delay. Non-real time VBR service may
support statistical multiplexing of connections.
The unspecifiedBitRate service is intended for non-real time
applications; that is, those not requiring tightly constrained delay
and delay variation. UBR sources are expected to be bursty. UBR
service supports a high degree of statistical multiplexing among
sources. UBR service does not specify traffic related service
guarantees. No numerical commitments are made with respect to
the cell loss ratio experienced by a UBR connection, or as to the
cell transfer delay experienced by cells on the connection.rw Enumeration .1.3.6.1.4.1.562.36.2.1.114.9.8.2.2.10.1.3 |
mscAtmIfVptUniSigVcdWeightThis attribute specifies an override for the weight of this unshaped
connection. This attribute is ignored for shaped connections, for
ABR connections, for connections on a CQC-based ATM FP and
basic VPTs.
When the value is set to sameAsCa, the weight is determined by the
weight policy attribute under the CA service category component
for all but standard VPT VCCs. For standard VPT VCCs, the
weight is determined by the VCC's service category, when the value
is set to sameAsCa.
When this attribute is set to a value from 1 to 4095, that value is
used for the weight policy of this connection relative to other
connections. For all but standard VPT VCCs, weight policy
determines the proportion of transit cell opportunities which are
allocated to this connection, compared to other connections in the
same service category. For standard VPT VCCs, weight policy
determines the proportion of transmit cell opportunities which are
allocated to this connection, compared to other connections
associated with the VPT.
When the value is set to upToQueueLimit, the weight policy is
limited only by the txQueueLimit.
VALUES (
0 = upToQueueLimit
65535 = sameAsCa
)rw Unsigned32 (0 | 1..4095 | 65535) .1.3.6.1.4.1.562.36.2.1.114.9.8.2.2.10.1.4 |
mscAtmIfVptUniSigVcdQosClassThis attribute specifies the quality of service for both the forward
and backward direction for this connection.
Class 1 supports a QOS that meets Service Class A performance
requirements (Circuit emulation, constant bit rate video).
Class 2 supports a QOS that meets Service Class B performance
requirements (Variable bit rate audio and video).
Class 3 supports a QOS that meets Service Class C performance
requirements (Connection-Oriented Data Transfer).
Class 4 supports a QOS that meets Service Class D performance
requirements (Connectionless Data Transfer).
Class 0 is the unspecified bit rate QOS class; no objective is
specified for the performance parameters.rw Enumeration .1.3.6.1.4.1.562.36.2.1.114.9.8.2.2.10.1.21 |
mscAtmIfVptUniSigVcdTrafficShapingThis attribute specifies whether this connection uses traffic shaping
when transmitting traffic to the ATM interface.
When sameAsCa is selected, traffic shaping for this connection is
based on the trafficShaping attribute of the connection's service
category component under the AtmIf CA. If the service category has
traffic shaping enabled, then traffic shaping is enabled for the
connection. Note that enabling traffic shaping may have no effect
under certain cases. These cases are listed in the description of the
trafficShaping operational attribute, which is under the Vcc Tm and
Vpc Tm components.
When disabled is selected, traffic shaping for this connection is
disabled.rw Enumeration .1.3.6.1.4.1.562.36.2.1.114.9.8.2.2.10.1.50 |
mscAtmIfVptUniSigVcdUnshapedTransmitQueueingThis attribute only applies when this connection is unshaped. This
attribute specifies the transmit queueing method for this connection
if it is unshaped. Refer to the unshapedTransmitQueueing attribute
under the AtmIf CA service category subcomponent for more details
on the meaning of this attribute.
When this attribute is set to sameAsCa, the transmit queueing
method for the connection is based on the
unshapedTransmitQueueing attribute of the connection's service
category component under the ConnectionAdministrator.
When this attribute is set to common, transmit traffic on this
unshaped connection is destined for the common queue.
The value sameAsInterface is for migration from previous software
releases, but should no longer be usedrw Enumeration .1.3.6.1.4.1.562.36.2.1.114.9.8.2.2.10.1.60 |
mscAtmIfVptUniSigVcdUsageParameterControlThis attribute specifies whether this connection enforces usage
parameter control when receiving traffic from the ATM interface.
When sameAsCa is selected, UPC for the connection is based on
the usageParameterControl attribute of the connection's service
category component under the ConnectionAdministrator. If the
service category has UPC enabled, then UPC is enabled for the
connection. Note that enabling UPC may have no effect under
certain cases. These cases are listed in the description of the
usageParameterControl operational attribute, which is under the
Vcc Tm or Vpc Tm component.
When disabled is selected, UPC for this connection is disabled.
The value sameAsInterface is for migration from previous software
releases, but should no longer be usedrw Enumeration .1.3.6.1.4.1.562.36.2.1.114.9.8.2.2.10.1.70 |
mscAtmIfVptUniSigVcdTdpTableThis attribute is a vector of five traffic parameters whose meanings
are defined by the trafficDescType attribute. The values of peak cell
rate (PCR), sustained cell rate (SCR) and requested shaping rate are
expressed in cell/s. Maximum burst size (MBS) is expressed in
cells. CDVT is expressed in microseconds. The values of PCR,
SCR, MBS and CDVT are used for connection admission control
(CAC). The value of CDVT is only used for connections where the
atmServiceCategory is constantBitRate. For all other values of
atmServiceCategory, CDVT is ignored. The values of PCR, SCR
and requested shaping rate are used to determine the actual shaping
rate where traffic shaping is enabled.
When trafficDescType is 3, parameter 1 represents the PCR for CLP
equal to 0 and 1 traffic; parameter 4 represents the CDVT; and
parameter 5 represents the requested shaping rate. A non-zero value
in parameter 5 overrides any value in parameter 1. This result is
used as the PCR. Parameter 1 must be non-zero. Parameters 2 and 3
must be zero.
When trafficDescType is 6, parameter 1 represents the PCR for CLP
equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP
equal to 0 and 1 traffic; parameter 3 represents the MBS for CLP
equal to 0 and 1 traffic; parameter 4 represents the CDVT; and
parameter 5 represents the requested shaping rate. A non-zero value
in parameter 5 overrides any value in parameter 1. This result is
used as the PCR. Parameters 1, 2, and 3 must be non-zero.
Parameter 1 must be greater than or equal to parameter 2. Parameter
5 must either be zero (unused) or greater than or equal to parameter
2.
When trafficDescType is 7, parameter 1 represents the PCR for CLP
equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP
equal to 0 with cell discard; parameter 3 represents the MBS for
CLP equal to 0 traffic; parameter 4 represents the CDVT; and
parameter 5 represents the requested shaping rate. A non-zero value
in parameter 5 overrides any value in parameter 1. This result is
used as the PCR. Parameters 1, 2, and 3 must be non-zero.
Parameter 1 must be greater than or equal to parameter 2. Parameter
5 must either be zero (unused) or greater than or equal to parameter
2.
When trafficDescType is 8, parameter 1 represents the PCR for CLP
equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP
equal to 0 traffic with cell tagging; parameter 3 represents the MBS
for CLP equal to 0 traffic; parameter 4 represents the CDVT; and
parameter 5 represents the requested shaping rate. A non-zero value
in parameter 5 overrides any value in parameter 1. This result is
used as the PCR. Parameters 1, 2, and 3 must be non-zero.
Parameter 1 must be greater than or equal to parameter 2. Parameter
5 must either be zero (unused) or greater than or equal to parameter
2.
Whenever it is valid for PCR to be specified, parameter 5 may also
be used to specify a requested shaping rate. A non-zero value in
parameter 5 overrides the value in parameter 1 and is used as the
peak cell rate in calculations of CAC and shaping rate.
For trafficDescType 3 the traffic is shaped at the next rate less than
the PCR.
For trafficDescType 6, 7, and 8, the traffic is shaped at the highest
available rate which is between PCR and SCR. However, if there is
no available shaping rate between PCR and SCR, traffic is shaped at
the next rate above the PCR. SEQUENCE OF MscAtmIfVptUniSigVcdTdpEntry .1.3.6.1.4.1.562.36.2.1.114.9.8.2.2.387 |
mscAtmIfVptUniSigVcdTdpEntryAn entry in the mscAtmIfVptUniSigVcdTdpTable. MscAtmIfVptUniSigVcdTdpEntry .1.3.6.1.4.1.562.36.2.1.114.9.8.2.2.387.1 |
mscAtmIfVptUniSigVcdTdpIndexThis variable represents the mscAtmIfVptUniSigVcdTdpTable
specific index for the mscAtmIfVptUniSigVcdTdpTable. Integer32 .1.3.6.1.4.1.562.36.2.1.114.9.8.2.2.387.1.1 |
mscAtmIfVptUniSigVcdTdpValueThis variable represents an individual value for the
mscAtmIfVptUniSigVcdTdpTable.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.114.9.8.2.2.387.1.2 |
mscAtmIfVptUniSigProvTableThis attribute group contains the provisionable attributes for the
Signalling component. SEQUENCE OF MscAtmIfVptUniSigProvEntry .1.3.6.1.4.1.562.36.2.1.114.9.8.2.10 |
mscAtmIfVptUniSigProvEntryAn entry in the mscAtmIfVptUniSigProvTable. MscAtmIfVptUniSigProvEntry .1.3.6.1.4.1.562.36.2.1.114.9.8.2.10.1 |
mscAtmIfVptUniSigVciThis attribute specifies the signalling channel number.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.114.9.8.2.10.1.1 |
mscAtmIfVptUniSigAddressConversionThis attribute specifies the address conversion on the outgoing
signalling PDUs. The options are none, nativeE164, or nsap. The
none option is the default and if this option is chosen then nothing
is done to the address information element (IE) in the outgoing
signalling message. If nativeE164 option is chosen, then only
NSAP encapsulated E.164 addresses with zeros in the ESI are
converted to native E.164 format in the outgoing signalling
message. If the NSAP address is not encapsulated E.164 or the ESI
field is not zeros and the nativeE164 option is chosen, then the call
is cleared. If the nsap option is chosen, then native E.164 addresses
are converted to NSAP E.164 with zeros in the ESI field; otherwise
the address is in NSAP format and is not changed.rw Enumeration .1.3.6.1.4.1.562.36.2.1.114.9.8.2.10.1.2 |
mscAtmIfVptUniSigOperatingModeThis attribute specifies the operating mode of the signaling channel.
provisionedOnly indicates that only SPVCs and SPVPs are
supported on the interface and SVCs are not supported. This value
is permitted only on UNI interfaces.
normal indicates that SVCs, SPVCs, and SPVPs are supported on
the interface.rw Enumeration .1.3.6.1.4.1.562.36.2.1.114.9.8.2.10.1.3 |
mscAtmIfVptUniSigStateTableThis group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. SEQUENCE OF MscAtmIfVptUniSigStateEntry .1.3.6.1.4.1.562.36.2.1.114.9.8.2.11 |
mscAtmIfVptUniSigStateEntryAn entry in the mscAtmIfVptUniSigStateTable. MscAtmIfVptUniSigStateEntry .1.3.6.1.4.1.562.36.2.1.114.9.8.2.11.1 |
mscAtmIfVptUniSigAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.114.9.8.2.11.1.1 |
mscAtmIfVptUniSigOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.ro Enumeration .1.3.6.1.4.1.562.36.2.1.114.9.8.2.11.1.2 |
mscAtmIfVptUniSigUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.ro Enumeration .1.3.6.1.4.1.562.36.2.1.114.9.8.2.11.1.3 |
mscAtmIfVptUniSigOperTableThis attribute contains the operational attributes for the
AtmSignalling component. SEQUENCE OF MscAtmIfVptUniSigOperEntry .1.3.6.1.4.1.562.36.2.1.114.9.8.2.12 |
mscAtmIfVptUniSigOperEntryAn entry in the mscAtmIfVptUniSigOperTable. MscAtmIfVptUniSigOperEntry .1.3.6.1.4.1.562.36.2.1.114.9.8.2.12.1 |
mscAtmIfVptUniSigLastTxCauseCodeThis attribute indicates the cause code in the last transmitted
signalling message that contains the CAUSE information element.
The cause code is used to describe the reason for generating certain
signalling messages.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.114.9.8.2.12.1.1 |
mscAtmIfVptUniSigLastTxDiagCodeThis attribute contains the diagnostic code in the last transmitted
signalling message. The diagnostic code is contained in the CAUSE
information element and identifies an information element type or
timer type. The diagnostic code is present only if a procedural error
is detected by the signalling protocol. A diagnostic code is always
accompanied by the cause code. If there is no failure, this attribute
is set to 0.ro Hex .1.3.6.1.4.1.562.36.2.1.114.9.8.2.12.1.2 |
mscAtmIfVptUniSigLastRxCauseCodeThis attribute contains the cause code in the last received signalling
message that contains the CAUSE information element. The cause
code is used to describe the reason for generating certain signalling
messages.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.114.9.8.2.12.1.3 |
mscAtmIfVptUniSigLastRxDiagCodeThis attribute contains the diagnostic code in the last received
signalling message. The diagnostic code is contained in the CAUSE
information element and identifies an information element type or
timer type. The diagnostic code is present only if a procedural error
is detected by the signalling protocol. A diagnostic code is always
accompanied by the cause code. If there is no failure, this attribute
is set to 0.ro Hex .1.3.6.1.4.1.562.36.2.1.114.9.8.2.12.1.4 |
mscAtmIfVptUniSigStatsTableThis attribute group contains the statistics associated with the
AtmSignalling component. SEQUENCE OF MscAtmIfVptUniSigStatsEntry .1.3.6.1.4.1.562.36.2.1.114.9.8.2.13 |
mscAtmIfVptUniSigStatsEntryAn entry in the mscAtmIfVptUniSigStatsTable. MscAtmIfVptUniSigStatsEntry .1.3.6.1.4.1.562.36.2.1.114.9.8.2.13.1 |
mscAtmIfVptUniSigCurrentConnectionsThis attribute indicates the total number of currently active
connections.roobsolete Counter32 .1.3.6.1.4.1.562.36.2.1.114.9.8.2.13.1.1 |
mscAtmIfVptUniSigPeakConnectionsThis attribute indicates the high water mark of active point-to-
point and point-to-multipoint connections.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.114.9.8.2.13.1.2 |
mscAtmIfVptUniSigSuccessfulConnectionsThis attribute counts the total number of switched point-to-
point and point-to-multipoint connections that were successfully
established. The counter wraps to 0 when the maximum value is
exceeded.ro Counter32 .1.3.6.1.4.1.562.36.2.1.114.9.8.2.13.1.3 |
mscAtmIfVptUniSigFailedConnectionsThis attribute counts the total number of switched connections that
were not successfully established.The counter wraps to 0 when the
maximum value is exceeded.ro Counter32 .1.3.6.1.4.1.562.36.2.1.114.9.8.2.13.1.4 |
mscAtmIfVptUniSigTxPdusThis attribute counts the number of transmitted signalling
PDUs.The counter wraps to 0 when the maximum value is
exceeded.ro Counter32 .1.3.6.1.4.1.562.36.2.1.114.9.8.2.13.1.5 |
mscAtmIfVptUniSigRxPdusThis attribute counts the number of received signalling PDUs.The
counter wraps to 0 when the maximum value is exceeded.ro Counter32 .1.3.6.1.4.1.562.36.2.1.114.9.8.2.13.1.6 |
mscAtmIfVptUniSigCurrentPmpConnectionsThis attribute indicates the number of currently active point-to-
multipoint connections.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.114.9.8.2.13.1.7 |
mscAtmIfVptUniSigPeakPmpConnectionsThis attribute indicates the high water mark of active point-to-
multipoint connections.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.114.9.8.2.13.1.8 |
mscAtmIfVptUniSigSuccessfulPmpConnectionsThis attribute counts the total number of switched point-to-
multipoint connections that were successfully established.
The counter wraps to 0 when the maximum value is
exceeded.ro Counter32 .1.3.6.1.4.1.562.36.2.1.114.9.8.2.13.1.9 |
mscAtmIfVptUniSigFailedPmpConnectionsThis attribute counts the number of switched point-to-
multipoint connections that were not successfully
established.The counter wraps to 0 when the maximum value
is exceeded.ro Counter32 .1.3.6.1.4.1.562.36.2.1.114.9.8.2.13.1.10 |
mscAtmIfVptUniSigNewCurrentConnectionsThis attribute indicates the total number of currently active point-to-
point and point-to-multipoint connections.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.114.9.8.2.13.1.11 |
mscAtmIfVptUniAddr OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.114.9.8.3 |
mscAtmIfVptUniAddrRowStatusTableThis entry controls the addition and deletion of
mscAtmIfVptUniAddr components. SEQUENCE OF MscAtmIfVptUniAddrRowStatusEntry .1.3.6.1.4.1.562.36.2.1.114.9.8.3.1 |
mscAtmIfVptUniAddrRowStatusEntryA single entry in the table represents a single
mscAtmIfVptUniAddr component. MscAtmIfVptUniAddrRowStatusEntry .1.3.6.1.4.1.562.36.2.1.114.9.8.3.1.1 |
mscAtmIfVptUniAddrRowStatusThis variable is used as the basis for SNMP naming of
mscAtmIfVptUniAddr components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.9.8.3.1.1.1 |
mscAtmIfVptUniAddrComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.9.8.3.1.1.2 |
mscAtmIfVptUniAddrStorageTypeThis variable represents the storage type value for the
mscAtmIfVptUniAddr tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.9.8.3.1.1.4 |
mscAtmIfVptUniAddrAddressIndexThis variable represents an index for the mscAtmIfVptUniAddr tables. AsciiStringIndex .1.3.6.1.4.1.562.36.2.1.114.9.8.3.1.1.10 |
mscAtmIfVptUniAddrAddressTypeIndexThis variable represents an index for the mscAtmIfVptUniAddr tables. Enumeration .1.3.6.1.4.1.562.36.2.1.114.9.8.3.1.1.11 |
mscAtmIfVptUniAddrTermSP OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.114.9.8.3.2 |
mscAtmIfVptUniAddrTermSPRowStatusTableThis entry controls the addition and deletion of
mscAtmIfVptUniAddrTermSP components. SEQUENCE OF MscAtmIfVptUniAddrTermSPRowStatusEntry .1.3.6.1.4.1.562.36.2.1.114.9.8.3.2.1 |
mscAtmIfVptUniAddrTermSPRowStatusEntryA single entry in the table represents a single
mscAtmIfVptUniAddrTermSP component. MscAtmIfVptUniAddrTermSPRowStatusEntry .1.3.6.1.4.1.562.36.2.1.114.9.8.3.2.1.1 |
mscAtmIfVptUniAddrTermSPRowStatusThis variable is used as the basis for SNMP naming of
mscAtmIfVptUniAddrTermSP components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.9.8.3.2.1.1.1 |
mscAtmIfVptUniAddrTermSPComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.9.8.3.2.1.1.2 |
mscAtmIfVptUniAddrTermSPStorageTypeThis variable represents the storage type value for the
mscAtmIfVptUniAddrTermSP tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.9.8.3.2.1.1.4 |
mscAtmIfVptUniAddrTermSPIndexThis variable represents the index for the mscAtmIfVptUniAddrTermSP tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.114.9.8.3.2.1.1.10 |
mscAtmIfVptUniAddrPnniInfo OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.114.9.8.3.3 |
mscAtmIfVptUniAddrPnniInfoRowStatusTableThis entry controls the addition and deletion of
mscAtmIfVptUniAddrPnniInfo components. SEQUENCE OF MscAtmIfVptUniAddrPnniInfoRowStatusEntry .1.3.6.1.4.1.562.36.2.1.114.9.8.3.3.1 |
mscAtmIfVptUniAddrPnniInfoRowStatusEntryA single entry in the table represents a single
mscAtmIfVptUniAddrPnniInfo component. MscAtmIfVptUniAddrPnniInfoRowStatusEntry .1.3.6.1.4.1.562.36.2.1.114.9.8.3.3.1.1 |
mscAtmIfVptUniAddrPnniInfoRowStatusThis variable is used as the basis for SNMP naming of
mscAtmIfVptUniAddrPnniInfo components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.9.8.3.3.1.1.1 |
mscAtmIfVptUniAddrPnniInfoComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.9.8.3.3.1.1.2 |
mscAtmIfVptUniAddrPnniInfoStorageTypeThis variable represents the storage type value for the
mscAtmIfVptUniAddrPnniInfo tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.9.8.3.3.1.1.4 |
mscAtmIfVptUniAddrPnniInfoIndexThis variable represents the index for the mscAtmIfVptUniAddrPnniInfo tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.114.9.8.3.3.1.1.10 |
mscAtmIfVptUniAddrPnniInfoProvTableThis attribute group contains the provisioned attributes relating to
PNNI for a PnniInfo component. SEQUENCE OF MscAtmIfVptUniAddrPnniInfoProvEntry .1.3.6.1.4.1.562.36.2.1.114.9.8.3.3.10 |
mscAtmIfVptUniAddrPnniInfoProvEntryAn entry in the mscAtmIfVptUniAddrPnniInfoProvTable. MscAtmIfVptUniAddrPnniInfoProvEntry .1.3.6.1.4.1.562.36.2.1.114.9.8.3.3.10.1 |
mscAtmIfVptUniAddrPnniInfoScopeThis attribute specifies the scope of the ATM address, which is the
highest level up to which this address will be advertised in the
PNNI hierarchy. The scope must be set to a value numerically less
than or equal to the level of the lowest level peer group containing
this node. Setting the scope to 0 will cause the address to be
advertised globally within this PNNI routing domain.rw INTEGER (-1..104) .1.3.6.1.4.1.562.36.2.1.114.9.8.3.3.10.1.1 |
mscAtmIfVptUniAddrPnniInfoReachabilityThis attribute indicates whether the address is internal or exterior.
An internal reachable address is an address of a destination that is
directly attached to the logical node advertising the address. An
exterior reachable address is an address that can be reached
through a PNNI routing domain, but which is not located in that
PNNI routing domain.rw Enumeration .1.3.6.1.4.1.562.36.2.1.114.9.8.3.3.10.1.2 |
mscAtmIfVptUniAddrOperTableThis attribute group contains the operational attributes for the
Address component. SEQUENCE OF MscAtmIfVptUniAddrOperEntry .1.3.6.1.4.1.562.36.2.1.114.9.8.3.10 |
mscAtmIfVptUniAddrOperEntryAn entry in the mscAtmIfVptUniAddrOperTable. MscAtmIfVptUniAddrOperEntry .1.3.6.1.4.1.562.36.2.1.114.9.8.3.10.1 |
mscAtmIfVptUniAddrScopeThis attribute indicates the scope of the ATM address, which is the
highest level to which this address will be advertised in the PNNI
hierarchy. If no PnniInfo subcomponent has been provisioned, then
the scope will default to the level of this node in the PNNI
hierarchy. If this node does not participate in a PNNI hierarchy, then
this attribute will have the value of -1.ro INTEGER (-1..104) .1.3.6.1.4.1.562.36.2.1.114.9.8.3.10.1.1 |
mscAtmIfVptUniAddrReachabilityThis attribute indicates whether the address is internal or exterior.
An internal reachable address is an address of a destination that is
directly attached to the logical node advertising the address. An
exterior reachable address is an address that can be reached
through a PNNI routing domain, but which is not located in that
PNNI routing domain.ro Enumeration .1.3.6.1.4.1.562.36.2.1.114.9.8.3.10.1.2 |
mscAtmIfVptUniCallingAScr OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.114.9.8.4 |
mscAtmIfVptUniCallingAScrRowStatusTableThis entry controls the addition and deletion of
mscAtmIfVptUniCallingAScr components. SEQUENCE OF MscAtmIfVptUniCallingAScrRowStatusEntry .1.3.6.1.4.1.562.36.2.1.114.9.8.4.1 |
mscAtmIfVptUniCallingAScrRowStatusEntryA single entry in the table represents a single
mscAtmIfVptUniCallingAScr component. MscAtmIfVptUniCallingAScrRowStatusEntry .1.3.6.1.4.1.562.36.2.1.114.9.8.4.1.1 |
mscAtmIfVptUniCallingAScrRowStatusThis variable is used as the basis for SNMP naming of
mscAtmIfVptUniCallingAScr components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.9.8.4.1.1.1 |
mscAtmIfVptUniCallingAScrComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.9.8.4.1.1.2 |
mscAtmIfVptUniCallingAScrStorageTypeThis variable represents the storage type value for the
mscAtmIfVptUniCallingAScr tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.9.8.4.1.1.4 |
mscAtmIfVptUniCallingAScrIndexThis variable represents the index for the mscAtmIfVptUniCallingAScr tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.114.9.8.4.1.1.10 |
mscAtmIfVptUniCallingAScrAddr OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.114.9.8.4.2 |
mscAtmIfVptUniCallingAScrAddrRowStatusTableThis entry controls the addition and deletion of
mscAtmIfVptUniCallingAScrAddr components. SEQUENCE OF MscAtmIfVptUniCallingAScrAddrRowStatusEntry .1.3.6.1.4.1.562.36.2.1.114.9.8.4.2.1 |
mscAtmIfVptUniCallingAScrAddrRowStatusEntryA single entry in the table represents a single
mscAtmIfVptUniCallingAScrAddr component. MscAtmIfVptUniCallingAScrAddrRowStatusEntry .1.3.6.1.4.1.562.36.2.1.114.9.8.4.2.1.1 |
mscAtmIfVptUniCallingAScrAddrRowStatusThis variable is used as the basis for SNMP naming of
mscAtmIfVptUniCallingAScrAddr components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.9.8.4.2.1.1.1 |
mscAtmIfVptUniCallingAScrAddrComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.9.8.4.2.1.1.2 |
mscAtmIfVptUniCallingAScrAddrStorageTypeThis variable represents the storage type value for the
mscAtmIfVptUniCallingAScrAddr tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.9.8.4.2.1.1.4 |
mscAtmIfVptUniCallingAScrAddrAddressIndexThis variable represents an index for the mscAtmIfVptUniCallingAScrAddr tables. AsciiStringIndex .1.3.6.1.4.1.562.36.2.1.114.9.8.4.2.1.1.10 |
mscAtmIfVptUniCallingAScrAddrAddressActionIndexThis variable represents an index for the mscAtmIfVptUniCallingAScrAddr tables. Enumeration .1.3.6.1.4.1.562.36.2.1.114.9.8.4.2.1.1.11 |
mscAtmIfVptUniCallingAScrProvTableThis attribute group contains the provisionable attributes for the
CallingAScr component. SEQUENCE OF MscAtmIfVptUniCallingAScrProvEntry .1.3.6.1.4.1.562.36.2.1.114.9.8.4.10 |
mscAtmIfVptUniCallingAScrProvEntryAn entry in the mscAtmIfVptUniCallingAScrProvTable. MscAtmIfVptUniCallingAScrProvEntry .1.3.6.1.4.1.562.36.2.1.114.9.8.4.10.1 |
mscAtmIfVptUniCallingAScrAdminStatusThis attribute specifies whether the calling address screening feature
is enabled or disabled.
If enabled, incoming SVC calls are screened against provisioned
addresses. If enabled and the calling address in the ATM SVC call
request is provisioned to be accepted, the call is accepted or rejected
according to the action specified for that address. If the value is
enabled, and the calling address in the address request is not
provisioned, the call is rejected
If the value is disabled, no calling address screening is performed.rw Enumeration .1.3.6.1.4.1.562.36.2.1.114.9.8.4.10.1.1 |
mscAtmIfVptUniCallingAScrDefaultInsertionAddressThis attribute specifies the address to be inserted into the SVC
connection request if adminStatus is enabled and the connection
request does not contain a calling address. If the adminStatus
attribute is enabled and this attribute is empty, all incoming SVC
calls which do not contain a calling address are rejected.rw HexString .1.3.6.1.4.1.562.36.2.1.114.9.8.4.10.1.2 |
mscAtmIfVptUniCallingAScrStatTableThis attribute group contains statistics related to the incoming SVC
call requests received while the adminStatus attribute is set to
enabled. SEQUENCE OF MscAtmIfVptUniCallingAScrStatEntry .1.3.6.1.4.1.562.36.2.1.114.9.8.4.11 |
mscAtmIfVptUniCallingAScrStatEntryAn entry in the mscAtmIfVptUniCallingAScrStatTable. MscAtmIfVptUniCallingAScrStatEntry .1.3.6.1.4.1.562.36.2.1.114.9.8.4.11.1 |
mscAtmIfVptUniCallingAScrAcceptedCallsThis attribute counts the incoming SVC calls which were accepted
because the address specified in the call request matched a
provisioned ATM address and the associated action was accept.
When the counter exceeds the maximum, it wraps to 0.ro Counter32 .1.3.6.1.4.1.562.36.2.1.114.9.8.4.11.1.1 |
mscAtmIfVptUniCallingAScrRejectedCallsThis attribute counts the incoming SVC calls which were rejected
because the address specified in the call request matched a
provisioned ATM address, but the associated action was reject.
When the counter exceeds the maximum, it wraps to 0.ro Counter32 .1.3.6.1.4.1.562.36.2.1.114.9.8.4.11.1.2 |
mscAtmIfVptUniCallingAScrUnmatchedCallsThis attribute counts the incoming SVC calls which were rejected
because none of the provisioned ATM addresses matched the
applicable address in the incoming SVC call request.
When the counter exceeds the maximum, it wraps to 0.ro Counter32 .1.3.6.1.4.1.562.36.2.1.114.9.8.4.11.1.3 |
mscAtmIfVptUniCalledAScr OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.114.9.8.5 |
mscAtmIfVptUniCalledAScrRowStatusTableThis entry controls the addition and deletion of
mscAtmIfVptUniCalledAScr components. SEQUENCE OF MscAtmIfVptUniCalledAScrRowStatusEntry .1.3.6.1.4.1.562.36.2.1.114.9.8.5.1 |
mscAtmIfVptUniCalledAScrRowStatusEntryA single entry in the table represents a single
mscAtmIfVptUniCalledAScr component. MscAtmIfVptUniCalledAScrRowStatusEntry .1.3.6.1.4.1.562.36.2.1.114.9.8.5.1.1 |
mscAtmIfVptUniCalledAScrRowStatusThis variable is used as the basis for SNMP naming of
mscAtmIfVptUniCalledAScr components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.9.8.5.1.1.1 |
mscAtmIfVptUniCalledAScrComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.9.8.5.1.1.2 |
mscAtmIfVptUniCalledAScrStorageTypeThis variable represents the storage type value for the
mscAtmIfVptUniCalledAScr tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.9.8.5.1.1.4 |
mscAtmIfVptUniCalledAScrIndexThis variable represents the index for the mscAtmIfVptUniCalledAScr tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.114.9.8.5.1.1.10 |
mscAtmIfVptUniCalledAScrAddr OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.114.9.8.5.2 |
mscAtmIfVptUniCalledAScrAddrRowStatusTableThis entry controls the addition and deletion of
mscAtmIfVptUniCalledAScrAddr components. SEQUENCE OF MscAtmIfVptUniCalledAScrAddrRowStatusEntry .1.3.6.1.4.1.562.36.2.1.114.9.8.5.2.1 |
mscAtmIfVptUniCalledAScrAddrRowStatusEntryA single entry in the table represents a single
mscAtmIfVptUniCalledAScrAddr component. MscAtmIfVptUniCalledAScrAddrRowStatusEntry .1.3.6.1.4.1.562.36.2.1.114.9.8.5.2.1.1 |
mscAtmIfVptUniCalledAScrAddrRowStatusThis variable is used as the basis for SNMP naming of
mscAtmIfVptUniCalledAScrAddr components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.9.8.5.2.1.1.1 |
mscAtmIfVptUniCalledAScrAddrComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.9.8.5.2.1.1.2 |
mscAtmIfVptUniCalledAScrAddrStorageTypeThis variable represents the storage type value for the
mscAtmIfVptUniCalledAScrAddr tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.9.8.5.2.1.1.4 |
mscAtmIfVptUniCalledAScrAddrAddressIndexThis variable represents an index for the mscAtmIfVptUniCalledAScrAddr tables. AsciiStringIndex .1.3.6.1.4.1.562.36.2.1.114.9.8.5.2.1.1.10 |
mscAtmIfVptUniCalledAScrAddrAddressActionIndexThis variable represents an index for the mscAtmIfVptUniCalledAScrAddr tables. Enumeration .1.3.6.1.4.1.562.36.2.1.114.9.8.5.2.1.1.11 |
mscAtmIfVptUniCalledAScrProvTableThis attribute group contains the provisionable attributes for the
CalledAScr component. SEQUENCE OF MscAtmIfVptUniCalledAScrProvEntry .1.3.6.1.4.1.562.36.2.1.114.9.8.5.10 |
mscAtmIfVptUniCalledAScrProvEntryAn entry in the mscAtmIfVptUniCalledAScrProvTable. MscAtmIfVptUniCalledAScrProvEntry .1.3.6.1.4.1.562.36.2.1.114.9.8.5.10.1 |
mscAtmIfVptUniCalledAScrAdminStatusThis attribute specifies whether the called address screening feature
is enabled or disabled.
If the value is enabled, incoming SVC calls will be screened against
provisioned called addresses. If the value is enabled and the called
address in the ATM SVC call request has been provisioned, the call
is accepted or rejected according to the action specified for that
address. If the value is enabled and the called address in the call
request is not provisioned, the call is rejected.
If the value is disabled, no called address screening is performed.rw Enumeration .1.3.6.1.4.1.562.36.2.1.114.9.8.5.10.1.1 |
mscAtmIfVptUniCalledAScrStatTableThis attribute group contains statistics related to the incoming SVC
call requests received while the adminStatus attribute is set to
enabled. SEQUENCE OF MscAtmIfVptUniCalledAScrStatEntry .1.3.6.1.4.1.562.36.2.1.114.9.8.5.11 |
mscAtmIfVptUniCalledAScrStatEntryAn entry in the mscAtmIfVptUniCalledAScrStatTable. MscAtmIfVptUniCalledAScrStatEntry .1.3.6.1.4.1.562.36.2.1.114.9.8.5.11.1 |
mscAtmIfVptUniCalledAScrAcceptedCallsThis attribute counts the incoming SVC calls which were accepted
because the address specified in the call request matched a
provisioned ATM address and the associated action was accept.
When the counter exceeds the maximum, it wraps to 0.ro Counter32 .1.3.6.1.4.1.562.36.2.1.114.9.8.5.11.1.1 |
mscAtmIfVptUniCalledAScrRejectedCallsThis attribute counts the incoming SVC calls which were rejected
because the address specified in the call request matched a
provisioned ATM address, but the associated action was reject.
When the counter exceeds the maximum, it wraps to 0.ro Counter32 .1.3.6.1.4.1.562.36.2.1.114.9.8.5.11.1.2 |
mscAtmIfVptUniCalledAScrUnmatchedCallsThis attribute counts the incoming SVC calls which were rejected
because none of the provisioned ATM addresses matched the
applicable address in the incoming SVC call request.
When the counter exceeds the maximum, it wraps to 0.ro Counter32 .1.3.6.1.4.1.562.36.2.1.114.9.8.5.11.1.3 |
mscAtmIfVptUniProvTableThis group contains the provisionable attributes for the Uni
component. SEQUENCE OF MscAtmIfVptUniProvEntry .1.3.6.1.4.1.562.36.2.1.114.9.8.10 |
mscAtmIfVptUniProvEntryAn entry in the mscAtmIfVptUniProvTable. MscAtmIfVptUniProvEntry .1.3.6.1.4.1.562.36.2.1.114.9.8.10.1 |
mscAtmIfVptUniVersionThis attribute specifies which specification the UNI complies with.
The options are ATM FORUM 3.0, ATM FORUM 3.1 or ATM
FORUM 4.0. If this attribute is changed then all switched Vcc
components in this interface are cleared due to the fact that the two
versions are incompatible.rw Enumeration .1.3.6.1.4.1.562.36.2.1.114.9.8.10.1.1 |
mscAtmIfVptUniSideThis attribute indicates which side the interface is, user or network.rw Enumeration .1.3.6.1.4.1.562.36.2.1.114.9.8.10.1.2 |
mscAtmIfVptUniSoftPvcRetryPeriodThis attribute represents the time in seconds to wait between call set
up retries. The resolution is to the nearest 10 seconds.
This attribute has been obsoleted and is replaced by the
softPvpAndPvcRetryPeriod attribute.rwobsolete Unsigned32 .1.3.6.1.4.1.562.36.2.1.114.9.8.10.1.3 |
mscAtmIfVptUniSoftPvpAndPvcRetryPeriodThis attribute represents the time in seconds to wait between soft
PVP or soft PVC call setup retries. The resolution is to the nearest
10 seconds.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.114.9.8.10.1.4 |
mscAtmIfVptUniSoftPvpAndPvcHoldOffTimeThis attribute specifies how long to hold off retries following a
release or the connection. The resolution is to the nearest 50 ms.rw Unsigned32 (0 | 50..20000) .1.3.6.1.4.1.562.36.2.1.114.9.8.10.1.5 |
mscAtmIfVptUniLoopPreventionThis attribute specifies whether loop prevention is in effect on this
interface.
When the value is enabled, incoming calls on this interface cannot
be routed back out the same interface. When the value is disabled,
routing of incoming calls back out the same interface is permitted.
The recommended value is enabled. The value disabled should
only be used if routing of incoming calls back out over this interface
is actually required. As an example, the value disabled might be
needed if the interface is connected to an end-user multiplexing
device which has no routing capability.
Note that setting the value to enabled prevents only routing loops
which involve two network nodes.rw Enumeration .1.3.6.1.4.1.562.36.2.1.114.9.8.10.1.6 |
mscAtmIfVptUniAcctOptTableThis group contains the provisionable attributes for accounting. SEQUENCE OF MscAtmIfVptUniAcctOptEntry .1.3.6.1.4.1.562.36.2.1.114.9.8.11 |
mscAtmIfVptUniAcctOptEntryAn entry in the mscAtmIfVptUniAcctOptTable. MscAtmIfVptUniAcctOptEntry .1.3.6.1.4.1.562.36.2.1.114.9.8.11.1 |
mscAtmIfVptUniAccountCollectionThis attribute is used to turn accounting on or off for SVC and
SPVC connections. It also specifies the reason(s) for which
accounting data is collected: billing, test, study, audit or force.
If the set of reasons is not empty then accounting records will be
generated by this interface in the following situations:
- on a TODA changeover if TODA is enabled;
- every 12 hours (per connection) if TODA is disabled;
- on every call clear (a call record with final cell counts).
If none of the reasons is present, then accounting will be
suppressed.
The reason for collection is recorded in the accounting record, in
the attribute callingCollectReason or calledCollectReason as
appropriate.
Description of bits:
bill(0)
test(1)
study(2)
audit(3)
force(4)rw OCTET STRING .1.3.6.1.4.1.562.36.2.1.114.9.8.11.1.1 |
mscAtmIfVptUniAccountConnectionTypeThis attribute specifies whether accounting records generated by
this interface should be marked as originating, terminating or
intermediate. This attribute, in combination with the direction of the
call, determines the value of attribute connPointType of the
accounting record and may be used by downstream accounting
processes to correlate the records.
If the value is origTerm then records generated for incoming calls
will be marked as originating and records generated for outgoing
calls will be marked as terminating.
If the value is intermediate then records generated for all calls will
be marked as intermediate.rw Enumeration .1.3.6.1.4.1.562.36.2.1.114.9.8.11.1.2 |
mscAtmIfVptUniAccountClassThis attribute specifies the accounting class associated with the
interface. Its meaning is determined by the network operator.
Its value is simply recorded in the accounting records generated by
this interface, in the attribute callingServiceType or
calledServiceType as appropriate.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.114.9.8.11.1.3 |
mscAtmIfVptUniServiceExchangeThis attribute specifies the data service exchange associated with
this interface. Its meaning is determined by the network operator.
Its value is simply recorded in the accounting records generated by
this interface, in the attribute callingDse or calledDse as
appropriate.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.114.9.8.11.1.4 |
mscAtmIfVptUniVProvTableThis group contains the provisionable attributes for the Uni
component which are specific to virtual UNI interfaces. SEQUENCE OF MscAtmIfVptUniVProvEntry .1.3.6.1.4.1.562.36.2.1.114.9.8.12 |
mscAtmIfVptUniVProvEntryAn entry in the mscAtmIfVptUniVProvTable. MscAtmIfVptUniVProvEntry .1.3.6.1.4.1.562.36.2.1.114.9.8.12.1 |
mscAtmIfVptUniVpciThis attribute specifies the Virtual Path Connection Identifier
(VPCI) to be used between this signalling entity and its peer. The
VPCI of the peer virtual UNI must have the same value for
switched connections to be set up across the interface.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.114.9.8.12.1.1 |
atmUniMIB OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.69 |
IMPORTS Unknown .1.3.6.1.4.1.562.36.2.2.69 |
atmUniGroup OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.69.1 |
atmUniGroupCA OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.69.1.1 |
atmUniGroupCA02 OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.69.1.1.3 |
atmUniGroupCA02A OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.69.1.1.3.2 |
atmUniCapabilities OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.69.3 |
atmUniCapabilitiesCA OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.69.3.1 |
atmUniCapabilitiesCA02 OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.69.3.1.3 |
atmUniCapabilitiesCA02A OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.69.3.1.3.2 |