Nortel-MsCarrier-MscPassport-AtmPnniMIB
AI MIB Summary
Standard SNMP MIB module defining data structures for Nortel-MsCarrier-MscPassport-AtmPnniMIB.
345
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
345 total| Object Name |
|---|
mscAtmIfVptPnni OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.114.9.7 |
mscAtmIfVptPnniRowStatusTableThis entry controls the addition and deletion of
mscAtmIfVptPnni components. SEQUENCE OF MscAtmIfVptPnniRowStatusEntry .1.3.6.1.4.1.562.36.2.1.114.9.7.1 |
mscAtmIfVptPnniRowStatusEntryA single entry in the table represents a single
mscAtmIfVptPnni component. MscAtmIfVptPnniRowStatusEntry .1.3.6.1.4.1.562.36.2.1.114.9.7.1.1 |
mscAtmIfVptPnniRowStatusThis variable is used as the basis for SNMP naming of
mscAtmIfVptPnni components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.9.7.1.1.1 |
mscAtmIfVptPnniComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.9.7.1.1.2 |
mscAtmIfVptPnniStorageTypeThis variable represents the storage type value for the
mscAtmIfVptPnni tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.9.7.1.1.4 |
mscAtmIfVptPnniIndexThis variable represents the index for the mscAtmIfVptPnni tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.114.9.7.1.1.10 |
mscAtmIfVptPnniSig OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.114.9.7.2 |
mscAtmIfVptPnniSigRowStatusTableThis entry controls the addition and deletion of
mscAtmIfVptPnniSig components. SEQUENCE OF MscAtmIfVptPnniSigRowStatusEntry .1.3.6.1.4.1.562.36.2.1.114.9.7.2.1 |
mscAtmIfVptPnniSigRowStatusEntryA single entry in the table represents a single
mscAtmIfVptPnniSig component. MscAtmIfVptPnniSigRowStatusEntry .1.3.6.1.4.1.562.36.2.1.114.9.7.2.1.1 |
mscAtmIfVptPnniSigRowStatusThis variable is used as the basis for SNMP naming of
mscAtmIfVptPnniSig components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.9.7.2.1.1.1 |
mscAtmIfVptPnniSigComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.9.7.2.1.1.2 |
mscAtmIfVptPnniSigStorageTypeThis variable represents the storage type value for the
mscAtmIfVptPnniSig tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.9.7.2.1.1.4 |
mscAtmIfVptPnniSigIndexThis variable represents the index for the mscAtmIfVptPnniSig tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.114.9.7.2.1.1.10 |
mscAtmIfVptPnniSigVcd OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.114.9.7.2.2 |
mscAtmIfVptPnniSigVcdRowStatusTableThis entry controls the addition and deletion of
mscAtmIfVptPnniSigVcd components. SEQUENCE OF MscAtmIfVptPnniSigVcdRowStatusEntry .1.3.6.1.4.1.562.36.2.1.114.9.7.2.2.1 |
mscAtmIfVptPnniSigVcdRowStatusEntryA single entry in the table represents a single
mscAtmIfVptPnniSigVcd component. MscAtmIfVptPnniSigVcdRowStatusEntry .1.3.6.1.4.1.562.36.2.1.114.9.7.2.2.1.1 |
mscAtmIfVptPnniSigVcdRowStatusThis variable is used as the basis for SNMP naming of
mscAtmIfVptPnniSigVcd components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.9.7.2.2.1.1.1 |
mscAtmIfVptPnniSigVcdComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.9.7.2.2.1.1.2 |
mscAtmIfVptPnniSigVcdStorageTypeThis variable represents the storage type value for the
mscAtmIfVptPnniSigVcd tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.9.7.2.2.1.1.4 |
mscAtmIfVptPnniSigVcdIndexThis variable represents the index for the mscAtmIfVptPnniSigVcd tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.114.9.7.2.2.1.1.10 |
mscAtmIfVptPnniSigVcdProvTableThis group contains the provisionable traffic attributes for a control
channel. SEQUENCE OF MscAtmIfVptPnniSigVcdProvEntry .1.3.6.1.4.1.562.36.2.1.114.9.7.2.2.10 |
mscAtmIfVptPnniSigVcdProvEntryAn entry in the mscAtmIfVptPnniSigVcdProvTable. MscAtmIfVptPnniSigVcdProvEntry .1.3.6.1.4.1.562.36.2.1.114.9.7.2.2.10.1 |
mscAtmIfVptPnniSigVcdTrafficDescTypeThis attribute specifies the type of traffic management which is
applied to both the transmit and receive direction of this connection
as defined in the ATM Forum. The trafficDescType determines the
number and meaning of the parameters in the trafficDescParm
attribute.rw Enumeration .1.3.6.1.4.1.562.36.2.1.114.9.7.2.2.10.1.1 |
mscAtmIfVptPnniSigVcdAtmServiceCategoryThis attribute specifies the ATM service category for both directions
of the connection.
The constantBitRate service category is intended for real time
applications, that is those requiring tightly constrained delay and
delay variation, as would be appropriate for voice and video
applications. The consistent availability of a fixed quantity of
bandwidth is considered appropriate for CBR service. Cells which
are delayed beyond the value specified by CellTransfer Delay are
assumed to be of significantly reduce value to the application.
The rtVariableBitRate service category is intended for real time
applications, that is those requiring tightly constrained delay and
delay variation, as would be appropriate for voice and video
applications. Sources are expected to transmit at a rate which varies
with time. Equivalently, the source can be described as 'bursty'.
Cells which are delayed beyond the value specified by CTD are
assumed to be of significantly reduced value to the application. Real
time VBR service may support statistical multiplexing of real time
sources.
The nrtVariableBitRate service category is intended for non-real
time applications which have bursty traffic characteristics and which
can be characterized in terms of a PCR, SCR, and MBS. For those
cells which are transferred within the traffic contract, the application
expects a low cell loss ratio. For all connections, it expects a bound
on the mean cell transfer delay. Non-real time VBR service may
support statistical multiplexing of connections.
The unspecifiedBitRate service is intended for non-real time
applications; that is, those not requiring tightly constrained delay
and delay variation. UBR sources are expected to be bursty. UBR
service supports a high degree of statistical multiplexing among
sources. UBR service does not specify traffic related service
guarantees. No numerical commitments are made with respect to
the cell loss ratio experienced by a UBR connection, or as to the
cell transfer delay experienced by cells on the connection.rw Enumeration .1.3.6.1.4.1.562.36.2.1.114.9.7.2.2.10.1.3 |
mscAtmIfVptPnniSigVcdWeightThis attribute specifies an override for the weight of this unshaped
connection. This attribute is ignored for shaped connections, for
ABR connections, for connections on a CQC-based ATM FP and
basic VPTs.
When the value is set to sameAsCa, the weight is determined by the
weight policy attribute under the CA service category component
for all but standard VPT VCCs. For standard VPT VCCs, the
weight is determined by the VCC's service category, when the value
is set to sameAsCa.
When this attribute is set to a value from 1 to 4095, that value is
used for the weight policy of this connection relative to other
connections. For all but standard VPT VCCs, weight policy
determines the proportion of transit cell opportunities which are
allocated to this connection, compared to other connections in the
same service category. For standard VPT VCCs, weight policy
determines the proportion of transmit cell opportunities which are
allocated to this connection, compared to other connections
associated with the VPT.
When the value is set to upToQueueLimit, the weight policy is
limited only by the txQueueLimit.
VALUES (
0 = upToQueueLimit
65535 = sameAsCa
)rw Unsigned32 (0 | 1..4095 | 65535) .1.3.6.1.4.1.562.36.2.1.114.9.7.2.2.10.1.4 |
mscAtmIfVptPnniSigVcdQosClassThis attribute specifies the quality of service for both the forward
and backward direction for this connection.
Class 1 supports a QOS that meets Service Class A performance
requirements (Circuit emulation, constant bit rate video).
Class 2 supports a QOS that meets Service Class B performance
requirements (Variable bit rate audio and video).
Class 3 supports a QOS that meets Service Class C performance
requirements (Connection-Oriented Data Transfer).
Class 4 supports a QOS that meets Service Class D performance
requirements (Connectionless Data Transfer).
Class 0 is the unspecified bit rate QOS class; no objective is
specified for the performance parameters.rw Enumeration .1.3.6.1.4.1.562.36.2.1.114.9.7.2.2.10.1.21 |
mscAtmIfVptPnniSigVcdTrafficShapingThis attribute specifies whether this connection uses traffic shaping
when transmitting traffic to the ATM interface.
When sameAsCa is selected, traffic shaping for this connection is
based on the trafficShaping attribute of the connection's service
category component under the AtmIf CA. If the service category has
traffic shaping enabled, then traffic shaping is enabled for the
connection. Note that enabling traffic shaping may have no effect
under certain cases. These cases are listed in the description of the
trafficShaping operational attribute, which is under the Vcc Tm and
Vpc Tm components.
When disabled is selected, traffic shaping for this connection is
disabled.rw Enumeration .1.3.6.1.4.1.562.36.2.1.114.9.7.2.2.10.1.50 |
mscAtmIfVptPnniSigVcdUnshapedTransmitQueueingThis attribute only applies when this connection is unshaped. This
attribute specifies the transmit queueing method for this connection
if it is unshaped. Refer to the unshapedTransmitQueueing attribute
under the AtmIf CA service category subcomponent for more details
on the meaning of this attribute.
When this attribute is set to sameAsCa, the transmit queueing
method for the connection is based on the
unshapedTransmitQueueing attribute of the connection's service
category component under the ConnectionAdministrator.
When this attribute is set to common, transmit traffic on this
unshaped connection is destined for the common queue.
The value sameAsInterface is for migration from previous software
releases, but should no longer be usedrw Enumeration .1.3.6.1.4.1.562.36.2.1.114.9.7.2.2.10.1.60 |
mscAtmIfVptPnniSigVcdUsageParameterControlThis attribute specifies whether this connection enforces usage
parameter control when receiving traffic from the ATM interface.
When sameAsCa is selected, UPC for the connection is based on
the usageParameterControl attribute of the connection's service
category component under the ConnectionAdministrator. If the
service category has UPC enabled, then UPC is enabled for the
connection. Note that enabling UPC may have no effect under
certain cases. These cases are listed in the description of the
usageParameterControl operational attribute, which is under the
Vcc Tm or Vpc Tm component.
When disabled is selected, UPC for this connection is disabled.
The value sameAsInterface is for migration from previous software
releases, but should no longer be usedrw Enumeration .1.3.6.1.4.1.562.36.2.1.114.9.7.2.2.10.1.70 |
mscAtmIfVptPnniSigVcdTdpTableThis attribute is a vector of five traffic parameters whose meanings
are defined by the trafficDescType attribute. The values of peak cell
rate (PCR), sustained cell rate (SCR) and requested shaping rate are
expressed in cell/s. Maximum burst size (MBS) is expressed in
cells. CDVT is expressed in microseconds. The values of PCR,
SCR, MBS and CDVT are used for connection admission control
(CAC). The value of CDVT is only used for connections where the
atmServiceCategory is constantBitRate. For all other values of
atmServiceCategory, CDVT is ignored. The values of PCR, SCR
and requested shaping rate are used to determine the actual shaping
rate where traffic shaping is enabled.
When trafficDescType is 3, parameter 1 represents the PCR for CLP
equal to 0 and 1 traffic; parameter 4 represents the CDVT; and
parameter 5 represents the requested shaping rate. A non-zero value
in parameter 5 overrides any value in parameter 1. This result is
used as the PCR. Parameter 1 must be non-zero. Parameters 2 and 3
must be zero.
When trafficDescType is 6, parameter 1 represents the PCR for CLP
equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP
equal to 0 and 1 traffic; parameter 3 represents the MBS for CLP
equal to 0 and 1 traffic; parameter 4 represents the CDVT; and
parameter 5 represents the requested shaping rate. A non-zero value
in parameter 5 overrides any value in parameter 1. This result is
used as the PCR. Parameters 1, 2, and 3 must be non-zero.
Parameter 1 must be greater than or equal to parameter 2. Parameter
5 must either be zero (unused) or greater than or equal to parameter
2.
When trafficDescType is 7, parameter 1 represents the PCR for CLP
equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP
equal to 0 with cell discard; parameter 3 represents the MBS for
CLP equal to 0 traffic; parameter 4 represents the CDVT; and
parameter 5 represents the requested shaping rate. A non-zero value
in parameter 5 overrides any value in parameter 1. This result is
used as the PCR. Parameters 1, 2, and 3 must be non-zero.
Parameter 1 must be greater than or equal to parameter 2. Parameter
5 must either be zero (unused) or greater than or equal to parameter
2.
When trafficDescType is 8, parameter 1 represents the PCR for CLP
equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP
equal to 0 traffic with cell tagging; parameter 3 represents the MBS
for CLP equal to 0 traffic; parameter 4 represents the CDVT; and
parameter 5 represents the requested shaping rate. A non-zero value
in parameter 5 overrides any value in parameter 1. This result is
used as the PCR. Parameters 1, 2, and 3 must be non-zero.
Parameter 1 must be greater than or equal to parameter 2. Parameter
5 must either be zero (unused) or greater than or equal to parameter
2.
Whenever it is valid for PCR to be specified, parameter 5 may also
be used to specify a requested shaping rate. A non-zero value in
parameter 5 overrides the value in parameter 1 and is used as the
peak cell rate in calculations of CAC and shaping rate.
For trafficDescType 3 the traffic is shaped at the next rate less than
the PCR.
For trafficDescType 6, 7, and 8, the traffic is shaped at the highest
available rate which is between PCR and SCR. However, if there is
no available shaping rate between PCR and SCR, traffic is shaped at
the next rate above the PCR. SEQUENCE OF MscAtmIfVptPnniSigVcdTdpEntry .1.3.6.1.4.1.562.36.2.1.114.9.7.2.2.387 |
mscAtmIfVptPnniSigVcdTdpEntryAn entry in the mscAtmIfVptPnniSigVcdTdpTable. MscAtmIfVptPnniSigVcdTdpEntry .1.3.6.1.4.1.562.36.2.1.114.9.7.2.2.387.1 |
mscAtmIfVptPnniSigVcdTdpIndexThis variable represents the mscAtmIfVptPnniSigVcdTdpTable
specific index for the mscAtmIfVptPnniSigVcdTdpTable. Integer32 .1.3.6.1.4.1.562.36.2.1.114.9.7.2.2.387.1.1 |
mscAtmIfVptPnniSigVcdTdpValueThis variable represents an individual value for the
mscAtmIfVptPnniSigVcdTdpTable.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.114.9.7.2.2.387.1.2 |
mscAtmIfVptPnniSigProvTableThis attribute group contains the provisionable attributes for the
Signalling component. SEQUENCE OF MscAtmIfVptPnniSigProvEntry .1.3.6.1.4.1.562.36.2.1.114.9.7.2.10 |
mscAtmIfVptPnniSigProvEntryAn entry in the mscAtmIfVptPnniSigProvTable. MscAtmIfVptPnniSigProvEntry .1.3.6.1.4.1.562.36.2.1.114.9.7.2.10.1 |
mscAtmIfVptPnniSigVciThis attribute specifies the signalling channel number.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.114.9.7.2.10.1.1 |
mscAtmIfVptPnniSigAddressConversionThis attribute specifies the address conversion on the outgoing
signalling PDUs. The options are none, nativeE164, or nsap. The
none option is the default and if this option is chosen then nothing
is done to the address information element (IE) in the outgoing
signalling message. If nativeE164 option is chosen, then only
NSAP encapsulated E.164 addresses with zeros in the ESI are
converted to native E.164 format in the outgoing signalling
message. If the NSAP address is not encapsulated E.164 or the ESI
field is not zeros and the nativeE164 option is chosen, then the call
is cleared. If the nsap option is chosen, then native E.164 addresses
are converted to NSAP E.164 with zeros in the ESI field; otherwise
the address is in NSAP format and is not changed.rw Enumeration .1.3.6.1.4.1.562.36.2.1.114.9.7.2.10.1.2 |
mscAtmIfVptPnniSigOperatingModeThis attribute specifies the operating mode of the signaling channel.
provisionedOnly indicates that only SPVCs and SPVPs are
supported on the interface and SVCs are not supported. This value
is permitted only on UNI interfaces.
normal indicates that SVCs, SPVCs, and SPVPs are supported on
the interface.rw Enumeration .1.3.6.1.4.1.562.36.2.1.114.9.7.2.10.1.3 |
mscAtmIfVptPnniSigStateTableThis group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. SEQUENCE OF MscAtmIfVptPnniSigStateEntry .1.3.6.1.4.1.562.36.2.1.114.9.7.2.11 |
mscAtmIfVptPnniSigStateEntryAn entry in the mscAtmIfVptPnniSigStateTable. MscAtmIfVptPnniSigStateEntry .1.3.6.1.4.1.562.36.2.1.114.9.7.2.11.1 |
mscAtmIfVptPnniSigAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.114.9.7.2.11.1.1 |
mscAtmIfVptPnniSigOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.ro Enumeration .1.3.6.1.4.1.562.36.2.1.114.9.7.2.11.1.2 |
mscAtmIfVptPnniSigUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.ro Enumeration .1.3.6.1.4.1.562.36.2.1.114.9.7.2.11.1.3 |
mscAtmIfVptPnniSigOperTableThis attribute contains the operational attributes for the
AtmSignalling component. SEQUENCE OF MscAtmIfVptPnniSigOperEntry .1.3.6.1.4.1.562.36.2.1.114.9.7.2.12 |
mscAtmIfVptPnniSigOperEntryAn entry in the mscAtmIfVptPnniSigOperTable. MscAtmIfVptPnniSigOperEntry .1.3.6.1.4.1.562.36.2.1.114.9.7.2.12.1 |
mscAtmIfVptPnniSigLastTxCauseCodeThis attribute indicates the cause code in the last transmitted
signalling message that contains the CAUSE information element.
The cause code is used to describe the reason for generating certain
signalling messages.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.114.9.7.2.12.1.1 |
mscAtmIfVptPnniSigLastTxDiagCodeThis attribute contains the diagnostic code in the last transmitted
signalling message. The diagnostic code is contained in the CAUSE
information element and identifies an information element type or
timer type. The diagnostic code is present only if a procedural error
is detected by the signalling protocol. A diagnostic code is always
accompanied by the cause code. If there is no failure, this attribute
is set to 0.ro Hex .1.3.6.1.4.1.562.36.2.1.114.9.7.2.12.1.2 |
mscAtmIfVptPnniSigLastRxCauseCodeThis attribute contains the cause code in the last received signalling
message that contains the CAUSE information element. The cause
code is used to describe the reason for generating certain signalling
messages.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.114.9.7.2.12.1.3 |
mscAtmIfVptPnniSigLastRxDiagCodeThis attribute contains the diagnostic code in the last received
signalling message. The diagnostic code is contained in the CAUSE
information element and identifies an information element type or
timer type. The diagnostic code is present only if a procedural error
is detected by the signalling protocol. A diagnostic code is always
accompanied by the cause code. If there is no failure, this attribute
is set to 0.ro Hex .1.3.6.1.4.1.562.36.2.1.114.9.7.2.12.1.4 |
mscAtmIfVptPnniSigStatsTableThis attribute group contains the statistics associated with the
AtmSignalling component. SEQUENCE OF MscAtmIfVptPnniSigStatsEntry .1.3.6.1.4.1.562.36.2.1.114.9.7.2.13 |
mscAtmIfVptPnniSigStatsEntryAn entry in the mscAtmIfVptPnniSigStatsTable. MscAtmIfVptPnniSigStatsEntry .1.3.6.1.4.1.562.36.2.1.114.9.7.2.13.1 |
mscAtmIfVptPnniSigCurrentConnectionsThis attribute indicates the total number of currently active
connections.roobsolete Counter32 .1.3.6.1.4.1.562.36.2.1.114.9.7.2.13.1.1 |
mscAtmIfVptPnniSigPeakConnectionsThis attribute indicates the high water mark of active point-to-
point and point-to-multipoint connections.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.114.9.7.2.13.1.2 |
mscAtmIfVptPnniSigSuccessfulConnectionsThis attribute counts the total number of switched point-to-
point and point-to-multipoint connections that were successfully
established. The counter wraps to 0 when the maximum value is
exceeded.ro Counter32 .1.3.6.1.4.1.562.36.2.1.114.9.7.2.13.1.3 |
mscAtmIfVptPnniSigFailedConnectionsThis attribute counts the total number of switched connections that
were not successfully established.The counter wraps to 0 when the
maximum value is exceeded.ro Counter32 .1.3.6.1.4.1.562.36.2.1.114.9.7.2.13.1.4 |
mscAtmIfVptPnniSigTxPdusThis attribute counts the number of transmitted signalling
PDUs.The counter wraps to 0 when the maximum value is
exceeded.ro Counter32 .1.3.6.1.4.1.562.36.2.1.114.9.7.2.13.1.5 |
mscAtmIfVptPnniSigRxPdusThis attribute counts the number of received signalling PDUs.The
counter wraps to 0 when the maximum value is exceeded.ro Counter32 .1.3.6.1.4.1.562.36.2.1.114.9.7.2.13.1.6 |
mscAtmIfVptPnniSigCurrentPmpConnectionsThis attribute indicates the number of currently active point-to-
multipoint connections.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.114.9.7.2.13.1.7 |
mscAtmIfVptPnniSigPeakPmpConnectionsThis attribute indicates the high water mark of active point-to-
multipoint connections.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.114.9.7.2.13.1.8 |
mscAtmIfVptPnniSigSuccessfulPmpConnectionsThis attribute counts the total number of switched point-to-
multipoint connections that were successfully established.
The counter wraps to 0 when the maximum value is
exceeded.ro Counter32 .1.3.6.1.4.1.562.36.2.1.114.9.7.2.13.1.9 |
mscAtmIfVptPnniSigFailedPmpConnectionsThis attribute counts the number of switched point-to-
multipoint connections that were not successfully
established.The counter wraps to 0 when the maximum value
is exceeded.ro Counter32 .1.3.6.1.4.1.562.36.2.1.114.9.7.2.13.1.10 |
mscAtmIfVptPnniSigNewCurrentConnectionsThis attribute indicates the total number of currently active point-to-
point and point-to-multipoint connections.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.114.9.7.2.13.1.11 |
mscAtmIfVptPnniRcc OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.114.9.7.3 |
mscAtmIfVptPnniRccRowStatusTableThis entry controls the addition and deletion of
mscAtmIfVptPnniRcc components. SEQUENCE OF MscAtmIfVptPnniRccRowStatusEntry .1.3.6.1.4.1.562.36.2.1.114.9.7.3.1 |
mscAtmIfVptPnniRccRowStatusEntryA single entry in the table represents a single
mscAtmIfVptPnniRcc component. MscAtmIfVptPnniRccRowStatusEntry .1.3.6.1.4.1.562.36.2.1.114.9.7.3.1.1 |
mscAtmIfVptPnniRccRowStatusThis variable is used as the basis for SNMP naming of
mscAtmIfVptPnniRcc components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.9.7.3.1.1.1 |
mscAtmIfVptPnniRccComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.9.7.3.1.1.2 |
mscAtmIfVptPnniRccStorageTypeThis variable represents the storage type value for the
mscAtmIfVptPnniRcc tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.9.7.3.1.1.4 |
mscAtmIfVptPnniRccIndexThis variable represents the index for the mscAtmIfVptPnniRcc tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.114.9.7.3.1.1.10 |
mscAtmIfVptPnniRccVcd OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.114.9.7.3.2 |
mscAtmIfVptPnniRccVcdRowStatusTableThis entry controls the addition and deletion of
mscAtmIfVptPnniRccVcd components. SEQUENCE OF MscAtmIfVptPnniRccVcdRowStatusEntry .1.3.6.1.4.1.562.36.2.1.114.9.7.3.2.1 |
mscAtmIfVptPnniRccVcdRowStatusEntryA single entry in the table represents a single
mscAtmIfVptPnniRccVcd component. MscAtmIfVptPnniRccVcdRowStatusEntry .1.3.6.1.4.1.562.36.2.1.114.9.7.3.2.1.1 |
mscAtmIfVptPnniRccVcdRowStatusThis variable is used as the basis for SNMP naming of
mscAtmIfVptPnniRccVcd components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.9.7.3.2.1.1.1 |
mscAtmIfVptPnniRccVcdComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.9.7.3.2.1.1.2 |
mscAtmIfVptPnniRccVcdStorageTypeThis variable represents the storage type value for the
mscAtmIfVptPnniRccVcd tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.9.7.3.2.1.1.4 |
mscAtmIfVptPnniRccVcdIndexThis variable represents the index for the mscAtmIfVptPnniRccVcd tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.114.9.7.3.2.1.1.10 |
mscAtmIfVptPnniRccVcdProvTableThis group contains the provisionable traffic attributes for a control
channel. SEQUENCE OF MscAtmIfVptPnniRccVcdProvEntry .1.3.6.1.4.1.562.36.2.1.114.9.7.3.2.10 |
mscAtmIfVptPnniRccVcdProvEntryAn entry in the mscAtmIfVptPnniRccVcdProvTable. MscAtmIfVptPnniRccVcdProvEntry .1.3.6.1.4.1.562.36.2.1.114.9.7.3.2.10.1 |
mscAtmIfVptPnniRccVcdTrafficDescTypeThis attribute specifies the type of traffic management which is
applied to both the transmit and receive direction of this connection
as defined in the ATM Forum. The trafficDescType determines the
number and meaning of the parameters in the trafficDescParm
attribute.rw Enumeration .1.3.6.1.4.1.562.36.2.1.114.9.7.3.2.10.1.1 |
mscAtmIfVptPnniRccVcdAtmServiceCategoryThis attribute specifies the ATM service category for both directions
of the connection.
The constantBitRate service category is intended for real time
applications, that is those requiring tightly constrained delay and
delay variation, as would be appropriate for voice and video
applications. The consistent availability of a fixed quantity of
bandwidth is considered appropriate for CBR service. Cells which
are delayed beyond the value specified by CellTransfer Delay are
assumed to be of significantly reduce value to the application.
The rtVariableBitRate service category is intended for real time
applications, that is those requiring tightly constrained delay and
delay variation, as would be appropriate for voice and video
applications. Sources are expected to transmit at a rate which varies
with time. Equivalently, the source can be described as 'bursty'.
Cells which are delayed beyond the value specified by CTD are
assumed to be of significantly reduced value to the application. Real
time VBR service may support statistical multiplexing of real time
sources.
The nrtVariableBitRate service category is intended for non-real
time applications which have bursty traffic characteristics and which
can be characterized in terms of a PCR, SCR, and MBS. For those
cells which are transferred within the traffic contract, the application
expects a low cell loss ratio. For all connections, it expects a bound
on the mean cell transfer delay. Non-real time VBR service may
support statistical multiplexing of connections.
The unspecifiedBitRate service is intended for non-real time
applications; that is, those not requiring tightly constrained delay
and delay variation. UBR sources are expected to be bursty. UBR
service supports a high degree of statistical multiplexing among
sources. UBR service does not specify traffic related service
guarantees. No numerical commitments are made with respect to
the cell loss ratio experienced by a UBR connection, or as to the
cell transfer delay experienced by cells on the connection.rw Enumeration .1.3.6.1.4.1.562.36.2.1.114.9.7.3.2.10.1.3 |
mscAtmIfVptPnniRccVcdWeightThis attribute specifies an override for the weight of this unshaped
connection. This attribute is ignored for shaped connections, for
ABR connections, for connections on a CQC-based ATM FP and
basic VPTs.
When the value is set to sameAsCa, the weight is determined by the
weight policy attribute under the CA service category component
for all but standard VPT VCCs. For standard VPT VCCs, the
weight is determined by the VCC's service category, when the value
is set to sameAsCa.
When this attribute is set to a value from 1 to 4095, that value is
used for the weight policy of this connection relative to other
connections. For all but standard VPT VCCs, weight policy
determines the proportion of transit cell opportunities which are
allocated to this connection, compared to other connections in the
same service category. For standard VPT VCCs, weight policy
determines the proportion of transmit cell opportunities which are
allocated to this connection, compared to other connections
associated with the VPT.
When the value is set to upToQueueLimit, the weight policy is
limited only by the txQueueLimit.
VALUES (
0 = upToQueueLimit
65535 = sameAsCa
)rw Unsigned32 (0 | 1..4095 | 65535) .1.3.6.1.4.1.562.36.2.1.114.9.7.3.2.10.1.4 |
mscAtmIfVptPnniRccVcdQosClassThis attribute specifies the quality of service for both the forward
and backward direction for this connection.
Class 1 supports a QOS that meets Service Class A performance
requirements (Circuit emulation, constant bit rate video).
Class 2 supports a QOS that meets Service Class B performance
requirements (Variable bit rate audio and video).
Class 3 supports a QOS that meets Service Class C performance
requirements (Connection-Oriented Data Transfer).
Class 4 supports a QOS that meets Service Class D performance
requirements (Connectionless Data Transfer).
Class 0 is the unspecified bit rate QOS class; no objective is
specified for the performance parameters.rw Enumeration .1.3.6.1.4.1.562.36.2.1.114.9.7.3.2.10.1.21 |
mscAtmIfVptPnniRccVcdTrafficShapingThis attribute specifies whether this connection uses traffic shaping
when transmitting traffic to the ATM interface.
When sameAsCa is selected, traffic shaping for this connection is
based on the trafficShaping attribute of the connection's service
category component under the AtmIf CA. If the service category has
traffic shaping enabled, then traffic shaping is enabled for the
connection. Note that enabling traffic shaping may have no effect
under certain cases. These cases are listed in the description of the
trafficShaping operational attribute, which is under the Vcc Tm and
Vpc Tm components.
When disabled is selected, traffic shaping for this connection is
disabled.rw Enumeration .1.3.6.1.4.1.562.36.2.1.114.9.7.3.2.10.1.50 |
mscAtmIfVptPnniRccVcdUnshapedTransmitQueueingThis attribute only applies when this connection is unshaped. This
attribute specifies the transmit queueing method for this connection
if it is unshaped. Refer to the unshapedTransmitQueueing attribute
under the AtmIf CA service category subcomponent for more details
on the meaning of this attribute.
When this attribute is set to sameAsCa, the transmit queueing
method for the connection is based on the
unshapedTransmitQueueing attribute of the connection's service
category component under the ConnectionAdministrator.
When this attribute is set to common, transmit traffic on this
unshaped connection is destined for the common queue.
The value sameAsInterface is for migration from previous software
releases, but should no longer be usedrw Enumeration .1.3.6.1.4.1.562.36.2.1.114.9.7.3.2.10.1.60 |
mscAtmIfVptPnniRccVcdUsageParameterControlThis attribute specifies whether this connection enforces usage
parameter control when receiving traffic from the ATM interface.
When sameAsCa is selected, UPC for the connection is based on
the usageParameterControl attribute of the connection's service
category component under the ConnectionAdministrator. If the
service category has UPC enabled, then UPC is enabled for the
connection. Note that enabling UPC may have no effect under
certain cases. These cases are listed in the description of the
usageParameterControl operational attribute, which is under the
Vcc Tm or Vpc Tm component.
When disabled is selected, UPC for this connection is disabled.
The value sameAsInterface is for migration from previous software
releases, but should no longer be usedrw Enumeration .1.3.6.1.4.1.562.36.2.1.114.9.7.3.2.10.1.70 |
mscAtmIfVptPnniRccVcdTdpTableThis attribute is a vector of five traffic parameters whose meanings
are defined by the trafficDescType attribute. The values of peak cell
rate (PCR), sustained cell rate (SCR) and requested shaping rate are
expressed in cell/s. Maximum burst size (MBS) is expressed in
cells. CDVT is expressed in microseconds. The values of PCR,
SCR, MBS and CDVT are used for connection admission control
(CAC). The value of CDVT is only used for connections where the
atmServiceCategory is constantBitRate. For all other values of
atmServiceCategory, CDVT is ignored. The values of PCR, SCR
and requested shaping rate are used to determine the actual shaping
rate where traffic shaping is enabled.
When trafficDescType is 3, parameter 1 represents the PCR for CLP
equal to 0 and 1 traffic; parameter 4 represents the CDVT; and
parameter 5 represents the requested shaping rate. A non-zero value
in parameter 5 overrides any value in parameter 1. This result is
used as the PCR. Parameter 1 must be non-zero. Parameters 2 and 3
must be zero.
When trafficDescType is 6, parameter 1 represents the PCR for CLP
equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP
equal to 0 and 1 traffic; parameter 3 represents the MBS for CLP
equal to 0 and 1 traffic; parameter 4 represents the CDVT; and
parameter 5 represents the requested shaping rate. A non-zero value
in parameter 5 overrides any value in parameter 1. This result is
used as the PCR. Parameters 1, 2, and 3 must be non-zero.
Parameter 1 must be greater than or equal to parameter 2. Parameter
5 must either be zero (unused) or greater than or equal to parameter
2.
When trafficDescType is 7, parameter 1 represents the PCR for CLP
equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP
equal to 0 with cell discard; parameter 3 represents the MBS for
CLP equal to 0 traffic; parameter 4 represents the CDVT; and
parameter 5 represents the requested shaping rate. A non-zero value
in parameter 5 overrides any value in parameter 1. This result is
used as the PCR. Parameters 1, 2, and 3 must be non-zero.
Parameter 1 must be greater than or equal to parameter 2. Parameter
5 must either be zero (unused) or greater than or equal to parameter
2.
When trafficDescType is 8, parameter 1 represents the PCR for CLP
equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP
equal to 0 traffic with cell tagging; parameter 3 represents the MBS
for CLP equal to 0 traffic; parameter 4 represents the CDVT; and
parameter 5 represents the requested shaping rate. A non-zero value
in parameter 5 overrides any value in parameter 1. This result is
used as the PCR. Parameters 1, 2, and 3 must be non-zero.
Parameter 1 must be greater than or equal to parameter 2. Parameter
5 must either be zero (unused) or greater than or equal to parameter
2.
Whenever it is valid for PCR to be specified, parameter 5 may also
be used to specify a requested shaping rate. A non-zero value in
parameter 5 overrides the value in parameter 1 and is used as the
peak cell rate in calculations of CAC and shaping rate.
For trafficDescType 3 the traffic is shaped at the next rate less than
the PCR.
For trafficDescType 6, 7, and 8, the traffic is shaped at the highest
available rate which is between PCR and SCR. However, if there is
no available shaping rate between PCR and SCR, traffic is shaped at
the next rate above the PCR. SEQUENCE OF MscAtmIfVptPnniRccVcdTdpEntry .1.3.6.1.4.1.562.36.2.1.114.9.7.3.2.387 |
mscAtmIfVptPnniRccVcdTdpEntryAn entry in the mscAtmIfVptPnniRccVcdTdpTable. MscAtmIfVptPnniRccVcdTdpEntry .1.3.6.1.4.1.562.36.2.1.114.9.7.3.2.387.1 |
mscAtmIfVptPnniRccVcdTdpIndexThis variable represents the mscAtmIfVptPnniRccVcdTdpTable
specific index for the mscAtmIfVptPnniRccVcdTdpTable. Integer32 .1.3.6.1.4.1.562.36.2.1.114.9.7.3.2.387.1.1 |
mscAtmIfVptPnniRccVcdTdpValueThis variable represents an individual value for the
mscAtmIfVptPnniRccVcdTdpTable.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.114.9.7.3.2.387.1.2 |
mscAtmIfVptPnniRccProvTableThis group contains the generic provisionable attributes of an Rcc
component. SEQUENCE OF MscAtmIfVptPnniRccProvEntry .1.3.6.1.4.1.562.36.2.1.114.9.7.3.10 |
mscAtmIfVptPnniRccProvEntryAn entry in the mscAtmIfVptPnniRccProvTable. MscAtmIfVptPnniRccProvEntry .1.3.6.1.4.1.562.36.2.1.114.9.7.3.10.1 |
mscAtmIfVptPnniRccVciThis attribute specifies the VCI for the Routing Control Channel
(RCC). It is not recommended that the value be changed from the
default of 18 unless absolutely necessary. If a different VCI is
specified, ensure that the RCC at the far end is provisioned to use
the same VCI, otherwise the RCC will not come up.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.114.9.7.3.10.1.1 |
mscAtmIfVptPnniRccHlParmsTableThis group contains the provisionable Hello protocol parameters for
an Rcc component. SEQUENCE OF MscAtmIfVptPnniRccHlParmsEntry .1.3.6.1.4.1.562.36.2.1.114.9.7.3.11 |
mscAtmIfVptPnniRccHlParmsEntryAn entry in the mscAtmIfVptPnniRccHlParmsTable. MscAtmIfVptPnniRccHlParmsEntry .1.3.6.1.4.1.562.36.2.1.114.9.7.3.11.1 |
mscAtmIfVptPnniRccHelloHoldDownThis attribute is used to limit the rate at which this node sends out
Hello packets. Specifically, it specifies the minimum time between
successive Hellos.
A value of 0 specifies that the value provisioned for the
helloHoldDown attribute of the ARtg Pnni component should be
used.rw FixedPoint1 .1.3.6.1.4.1.562.36.2.1.114.9.7.3.11.1.1 |
mscAtmIfVptPnniRccHelloIntervalThis attribute specifies the duration of the Hello Timer. Every
helloInterval seconds, this node will send out a Hello packet to the
neighbor node, subject to the helloHoldDown timer having expired
at least once since the last Hello packet was sent.
A value of 0 specifies that the value provisioned for the
helloInterval attribute of the ARtg Pnni component should be used.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.114.9.7.3.11.1.2 |
mscAtmIfVptPnniRccHelloInactivityFactorThis attribute specifies the number of Hello intervals allowed to
pass without receiving a Hello from the neighbor node, before an
attempt is made to re-stage. The hello inactivity timer is enabled in
the oneWayInside, twoWayInside, oneWayOutside,
twoWayOutside and commonOutside hello states (see the
helloState attribute on the Rcc component for a description of these
states). Note that the value for the Hello interval used in the
calculation is the one specified in the Hello packet from the
neighbor node.
A value of 0 specifies that the value provisioned for the
helloInactivityFactor attribute of the ARtg Pnni component should
be used.
DESCRIPTIONrw Unsigned32 .1.3.6.1.4.1.562.36.2.1.114.9.7.3.11.1.3 |
mscAtmIfVptPnniRccStateTableThis group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. SEQUENCE OF MscAtmIfVptPnniRccStateEntry .1.3.6.1.4.1.562.36.2.1.114.9.7.3.12 |
mscAtmIfVptPnniRccStateEntryAn entry in the mscAtmIfVptPnniRccStateTable. MscAtmIfVptPnniRccStateEntry .1.3.6.1.4.1.562.36.2.1.114.9.7.3.12.1 |
mscAtmIfVptPnniRccAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.114.9.7.3.12.1.1 |
mscAtmIfVptPnniRccOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.ro Enumeration .1.3.6.1.4.1.562.36.2.1.114.9.7.3.12.1.2 |
mscAtmIfVptPnniRccUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.ro Enumeration .1.3.6.1.4.1.562.36.2.1.114.9.7.3.12.1.3 |
mscAtmIfVptPnniRccOperTableThis group contains the operational attributes for an Rcc
component. SEQUENCE OF MscAtmIfVptPnniRccOperEntry .1.3.6.1.4.1.562.36.2.1.114.9.7.3.13 |
mscAtmIfVptPnniRccOperEntryAn entry in the mscAtmIfVptPnniRccOperTable. MscAtmIfVptPnniRccOperEntry .1.3.6.1.4.1.562.36.2.1.114.9.7.3.13.1 |
mscAtmIfVptPnniRccTypeThis attribute indicates the role of this link in the PNNI hierarchy.
The following values are possible:
unknown: the Hello protocol has not yet determined the role of the
link.
lowestLevelHorizLink: the link is a horizontal link between two
lowest level nodes.
lowestLevelOutsideLink: the link is an outside link between two
border nodes.
horizontalLinkToLgn: the link is a horizontal link to a Logical
Group Node (LGN).
uplink: the link is a uplink to a higher level LGN.ro Enumeration .1.3.6.1.4.1.562.36.2.1.114.9.7.3.13.1.1 |
mscAtmIfVptPnniRccNegotiatedVersionThis attribute indicates the PNNI version negotiated with the
neighbor node.ro Enumeration .1.3.6.1.4.1.562.36.2.1.114.9.7.3.13.1.2 |
mscAtmIfVptPnniRccHelloStateThis attribute indicates the state of the Hello protocol exchange over
this link. The following are the possible values for this attribute:
down: the link is down; no PNNI routing packets will be sent over
or received over such a link. This is the initial state of the Hello
Finite State Machine, and can also be reached when lower-level
protocols have indicated that the link is not usable.
attempt: no Hello packets or Hello packets, with mismatch
information, have been received recently from the neighbor.
Attempts are made to contact the neighbor node by sending out
Hello packets every helloInterval seconds.
oneWayInside: Hello packets have been recently received from the
neighbor and it has been established that both nodes are members of
the same peer group, but the remote node ID and remote port ID in
the neighbor's Hello packets were set to zero. A Hello packet is sent
to the neighbor and the Hello timer is restarted.
twoWayInside: Bidirectional communication over this link between
this node and the neighbor node has been achieved.
oneWayOutside: Hello packets have been recently received from
the neighbor and it has been established that both nodes are
members of a different peer group, but the remote node ID and
remote port ID in the neighbor's Hello packets were set to zero.
twoWayOutside: Hellos have recently been received from the
neighbor indicating that the neighbor node belongs to a different
peer group. The correct remote node ID and remote port ID fields
were included in the Hello packet, but the nodal hierarchy list did
not include any common peer group. This state can also be reached
if a hierarchy mismatch occurs while in the commonOutside state.
commonOutside: A common level of the routing hierarchy has been
found, in addition to achieving full bi-directional communication
between the two nodes.ro Enumeration .1.3.6.1.4.1.562.36.2.1.114.9.7.3.13.1.3 |
mscAtmIfVptPnniRccRemoteNodeIdThis attribute indicates the neighbor node's node id.ro HexString .1.3.6.1.4.1.562.36.2.1.114.9.7.3.13.1.4 |
mscAtmIfVptPnniRccRemotePortIdThis attribute indicates the neighbor node's port id.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.114.9.7.3.13.1.5 |
mscAtmIfVptPnniRccStatsTableThis group contains the statistical attributes for an Rcc component. SEQUENCE OF MscAtmIfVptPnniRccStatsEntry .1.3.6.1.4.1.562.36.2.1.114.9.7.3.14 |
mscAtmIfVptPnniRccStatsEntryAn entry in the mscAtmIfVptPnniRccStatsTable. MscAtmIfVptPnniRccStatsEntry .1.3.6.1.4.1.562.36.2.1.114.9.7.3.14.1 |
mscAtmIfVptPnniRccHelloPacketsRxThis attribute counts the total number of Hello packets received
across this RCC, including bad and mismatched Hello packets. The
counter wraps when it exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.114.9.7.3.14.1.1 |
mscAtmIfVptPnniRccHelloPacketsTxThis attribute counts the total number of Hello packets transmitted
across this RCC. The counter wraps when it exceeds the maximum
value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.114.9.7.3.14.1.2 |
mscAtmIfVptPnniRccMismatchedHelloPacketsRxThis attribute counts the total number of mismatched Hello packets
received over this RCC. The counter wraps when it exceeds the
maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.114.9.7.3.14.1.3 |
mscAtmIfVptPnniRccBadHelloPacketsRxThis attribute counts the total number of bad Hello packets received
over this RCC. The counter wraps when it exceeds the maximum
value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.114.9.7.3.14.1.4 |
mscAtmIfVptPnniAddr OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.114.9.7.4 |
mscAtmIfVptPnniAddrRowStatusTableThis entry controls the addition and deletion of
mscAtmIfVptPnniAddr components. SEQUENCE OF MscAtmIfVptPnniAddrRowStatusEntry .1.3.6.1.4.1.562.36.2.1.114.9.7.4.1 |
mscAtmIfVptPnniAddrRowStatusEntryA single entry in the table represents a single
mscAtmIfVptPnniAddr component. MscAtmIfVptPnniAddrRowStatusEntry .1.3.6.1.4.1.562.36.2.1.114.9.7.4.1.1 |
mscAtmIfVptPnniAddrRowStatusThis variable is used as the basis for SNMP naming of
mscAtmIfVptPnniAddr components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.9.7.4.1.1.1 |
mscAtmIfVptPnniAddrComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.9.7.4.1.1.2 |
mscAtmIfVptPnniAddrStorageTypeThis variable represents the storage type value for the
mscAtmIfVptPnniAddr tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.9.7.4.1.1.4 |
mscAtmIfVptPnniAddrAddressIndexThis variable represents an index for the mscAtmIfVptPnniAddr tables. AsciiStringIndex .1.3.6.1.4.1.562.36.2.1.114.9.7.4.1.1.10 |
mscAtmIfVptPnniAddrAddressTypeIndexThis variable represents an index for the mscAtmIfVptPnniAddr tables. Enumeration .1.3.6.1.4.1.562.36.2.1.114.9.7.4.1.1.11 |
mscAtmIfVptPnniAddrTermSP OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.114.9.7.4.2 |
mscAtmIfVptPnniAddrTermSPRowStatusTableThis entry controls the addition and deletion of
mscAtmIfVptPnniAddrTermSP components. SEQUENCE OF MscAtmIfVptPnniAddrTermSPRowStatusEntry .1.3.6.1.4.1.562.36.2.1.114.9.7.4.2.1 |
mscAtmIfVptPnniAddrTermSPRowStatusEntryA single entry in the table represents a single
mscAtmIfVptPnniAddrTermSP component. MscAtmIfVptPnniAddrTermSPRowStatusEntry .1.3.6.1.4.1.562.36.2.1.114.9.7.4.2.1.1 |
mscAtmIfVptPnniAddrTermSPRowStatusThis variable is used as the basis for SNMP naming of
mscAtmIfVptPnniAddrTermSP components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.9.7.4.2.1.1.1 |
mscAtmIfVptPnniAddrTermSPComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.9.7.4.2.1.1.2 |
mscAtmIfVptPnniAddrTermSPStorageTypeThis variable represents the storage type value for the
mscAtmIfVptPnniAddrTermSP tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.9.7.4.2.1.1.4 |
mscAtmIfVptPnniAddrTermSPIndexThis variable represents the index for the mscAtmIfVptPnniAddrTermSP tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.114.9.7.4.2.1.1.10 |
mscAtmIfVptPnniAddrPnniInfo OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.114.9.7.4.3 |
mscAtmIfVptPnniAddrPnniInfoRowStatusTableThis entry controls the addition and deletion of
mscAtmIfVptPnniAddrPnniInfo components. SEQUENCE OF MscAtmIfVptPnniAddrPnniInfoRowStatusEntry .1.3.6.1.4.1.562.36.2.1.114.9.7.4.3.1 |
mscAtmIfVptPnniAddrPnniInfoRowStatusEntryA single entry in the table represents a single
mscAtmIfVptPnniAddrPnniInfo component. MscAtmIfVptPnniAddrPnniInfoRowStatusEntry .1.3.6.1.4.1.562.36.2.1.114.9.7.4.3.1.1 |
mscAtmIfVptPnniAddrPnniInfoRowStatusThis variable is used as the basis for SNMP naming of
mscAtmIfVptPnniAddrPnniInfo components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.9.7.4.3.1.1.1 |
mscAtmIfVptPnniAddrPnniInfoComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.9.7.4.3.1.1.2 |
mscAtmIfVptPnniAddrPnniInfoStorageTypeThis variable represents the storage type value for the
mscAtmIfVptPnniAddrPnniInfo tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.9.7.4.3.1.1.4 |
mscAtmIfVptPnniAddrPnniInfoIndexThis variable represents the index for the mscAtmIfVptPnniAddrPnniInfo tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.114.9.7.4.3.1.1.10 |
mscAtmIfVptPnniAddrPnniInfoProvTableThis attribute group contains the provisioned attributes relating to
PNNI for a PnniInfo component. SEQUENCE OF MscAtmIfVptPnniAddrPnniInfoProvEntry .1.3.6.1.4.1.562.36.2.1.114.9.7.4.3.10 |
mscAtmIfVptPnniAddrPnniInfoProvEntryAn entry in the mscAtmIfVptPnniAddrPnniInfoProvTable. MscAtmIfVptPnniAddrPnniInfoProvEntry .1.3.6.1.4.1.562.36.2.1.114.9.7.4.3.10.1 |
mscAtmIfVptPnniAddrPnniInfoScopeThis attribute specifies the scope of the ATM address, which is the
highest level up to which this address will be advertised in the
PNNI hierarchy. The scope must be set to a value numerically less
than or equal to the level of the lowest level peer group containing
this node. Setting the scope to 0 will cause the address to be
advertised globally within this PNNI routing domain.rw INTEGER (-1..104) .1.3.6.1.4.1.562.36.2.1.114.9.7.4.3.10.1.1 |
mscAtmIfVptPnniAddrPnniInfoReachabilityThis attribute indicates whether the address is internal or exterior.
An internal reachable address is an address of a destination that is
directly attached to the logical node advertising the address. An
exterior reachable address is an address that can be reached
through a PNNI routing domain, but which is not located in that
PNNI routing domain.rw Enumeration .1.3.6.1.4.1.562.36.2.1.114.9.7.4.3.10.1.2 |
mscAtmIfVptPnniAddrOperTableThis attribute group contains the operational attributes for the
Address component. SEQUENCE OF MscAtmIfVptPnniAddrOperEntry .1.3.6.1.4.1.562.36.2.1.114.9.7.4.10 |
mscAtmIfVptPnniAddrOperEntryAn entry in the mscAtmIfVptPnniAddrOperTable. MscAtmIfVptPnniAddrOperEntry .1.3.6.1.4.1.562.36.2.1.114.9.7.4.10.1 |
mscAtmIfVptPnniAddrScopeThis attribute indicates the scope of the ATM address, which is the
highest level to which this address will be advertised in the PNNI
hierarchy. If no PnniInfo subcomponent has been provisioned, then
the scope will default to the level of this node in the PNNI
hierarchy. If this node does not participate in a PNNI hierarchy, then
this attribute will have the value of -1.ro INTEGER (-1..104) .1.3.6.1.4.1.562.36.2.1.114.9.7.4.10.1.1 |
mscAtmIfVptPnniAddrReachabilityThis attribute indicates whether the address is internal or exterior.
An internal reachable address is an address of a destination that is
directly attached to the logical node advertising the address. An
exterior reachable address is an address that can be reached
through a PNNI routing domain, but which is not located in that
PNNI routing domain.ro Enumeration .1.3.6.1.4.1.562.36.2.1.114.9.7.4.10.1.2 |
mscAtmIfVptPnniProvTableThis group contains the provisionable attributes for the Pnni
component. SEQUENCE OF MscAtmIfVptPnniProvEntry .1.3.6.1.4.1.562.36.2.1.114.9.7.10 |
mscAtmIfVptPnniProvEntryAn entry in the mscAtmIfVptPnniProvTable. MscAtmIfVptPnniProvEntry .1.3.6.1.4.1.562.36.2.1.114.9.7.10.1 |
mscAtmIfVptPnniSoftPvcRetryPeriodThis attribute represents the time in seconds to wait between call
setup retries. The resolution is to the nearest 10 seconds.
This attribute has been obsoleted and is replaced by the
softPvpAndPvcRetryPeriod attribute.rwobsolete Unsigned32 .1.3.6.1.4.1.562.36.2.1.114.9.7.10.1.1 |
mscAtmIfVptPnniSoftPvpAndPvcRetryPeriodThis attribute represents the time in seconds to wait between soft
PVP or soft PVC call setup retries. The resolution is to the nearest
10 seconds.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.114.9.7.10.1.2 |
mscAtmIfVptPnniSoftPvpAndPvcHoldOffTimeThis attribute specifies how long to hold off retries following a
release or the connection. The resolution is to the nearest 50 ms.rw Unsigned32 (0 | 50..20000) .1.3.6.1.4.1.562.36.2.1.114.9.7.10.1.5 |
mscAtmIfVptPnniAdminWeightsTableThis group contains the provisionable administrative weights for the
Pnni component. These weights will be used by Generic
Connection Admission Control (GCAC) if administrative weight is
the selected optimization criterion. SEQUENCE OF MscAtmIfVptPnniAdminWeightsEntry .1.3.6.1.4.1.562.36.2.1.114.9.7.11 |
mscAtmIfVptPnniAdminWeightsEntryAn entry in the mscAtmIfVptPnniAdminWeightsTable. MscAtmIfVptPnniAdminWeightsEntry .1.3.6.1.4.1.562.36.2.1.114.9.7.11.1 |
mscAtmIfVptPnniCbrWeightThis attribute specifies the administrative weight assigned for
setting up switched calls with a service category of Constant Bit
Rate (CBR) for this PNNI interface. The value specified will be
used by Generic Connection Admission Control (GCAC) if
administrative weight is the selected optimization criterion; the
higher the value, the less desirable the link will be in path selection.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.114.9.7.11.1.1 |
mscAtmIfVptPnniRtVbrWeightThis attribute specifies the administrative weight assigned for
setting up switched calls with a service category of Real-Time
Variable Bit Rate (RT-VBR) for this PNNI interface. The value
specified will be used by Generic Connection Admission Control
(GCAC) if administrative weight is the selected optimization
criterion; the higher the value, the less desirable the link will be in
path selection.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.114.9.7.11.1.2 |
mscAtmIfVptPnniNrtVbrWeightThis attribute specifies the administrative weight assigned for
setting up switched calls with a service category of Non Real-Time
Variable Bit Rate (NRT-VBR) for this PNNI interface. The value
specified will be used by Generic Connection Admission Control
(GCAC) if administrative weight is the selected optimization
criterion; the higher the value, the less desirable the link will be in
path selection.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.114.9.7.11.1.3 |
mscAtmIfVptPnniUbrWeightThis attribute specifies the administrative weight assigned for
setting up switched calls with a service category of Unspecified Bit
Rate (UBR) for this PNNI interface. The value specified will be
used by Generic Connection Admission Control (GCAC) if
administrative weight is the selected optimization criterion; the
higher the value, the less desirable the link will be in path selection.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.114.9.7.11.1.4 |
mscAtmIfVptPnniAcctOptTableThis group contains the provisionable attributes for accounting. SEQUENCE OF MscAtmIfVptPnniAcctOptEntry .1.3.6.1.4.1.562.36.2.1.114.9.7.12 |
mscAtmIfVptPnniAcctOptEntryAn entry in the mscAtmIfVptPnniAcctOptTable. MscAtmIfVptPnniAcctOptEntry .1.3.6.1.4.1.562.36.2.1.114.9.7.12.1 |
mscAtmIfVptPnniAccountCollectionThis attribute is used to turn accounting on or off for SVC and
SPVC connections. It also specifies the reason(s) for which
accounting data is collected: billing, test, study, audit, or force.
If the set of reasons is not empty then accounting records will be
generated by this interface in the following situations:
- on a TODA changeover if TODA is enabled;
- every 12 hours (per connection) if TODA is disabled;
- on every call clear (a call record with final cell counts).
If none of the reasons is present, then accounting will be
suppressed.
The reason for collection is recorded in the accounting record, in
the attribute callingCollectReason or calledCollectReason as
appropriate.
Description of bits:
bill(0)
test(1)
study(2)
audit(3)
force(4)rw OCTET STRING .1.3.6.1.4.1.562.36.2.1.114.9.7.12.1.1 |
mscAtmIfVptPnniAccountConnectionTypeThis attribute specifies whether accounting records generated by
this interface should be marked as originating, terminating or
intermediate. This attribute, in combination with the direction of the
call, determines the value of attribute connPointType of the
accounting record and may be used by downstream accounting
processes to correlate the records.
If the value is origTerm then records generated for incoming calls
will be marked as originating and records generated for outgoing
calls will be marked as terminating.
If the value is intermediate then records generated for all calls will
be marked as intermediate.rw Enumeration .1.3.6.1.4.1.562.36.2.1.114.9.7.12.1.2 |
mscAtmIfVptPnniAccountClassThis attribute specifies the accounting class associated with the
interface. Its meaning is determined by the network operator.
Its value is simply recorded in the accounting records generated by
this interface, in the attribute callingServiceType or
calledServiceType as appropriate.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.114.9.7.12.1.3 |
mscAtmIfVptPnniServiceExchangeThis attribute specifies the data service exchange associated with
this interface. Its meaning is determined by the network operator.
Its value is simply recorded in the accounting records generated by
this interface, in the attribute callingDse or calledDse as
appropriate.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.114.9.7.12.1.4 |
mscAtmIfVptPnniOperationalTableThis group contains the operational attributes for a Pnni component. SEQUENCE OF MscAtmIfVptPnniOperationalEntry .1.3.6.1.4.1.562.36.2.1.114.9.7.13 |
mscAtmIfVptPnniOperationalEntryAn entry in the mscAtmIfVptPnniOperationalTable. MscAtmIfVptPnniOperationalEntry .1.3.6.1.4.1.562.36.2.1.114.9.7.13.1 |
mscAtmIfVptPnniPortIdThis attribute indicates the port id of the PNNI interface, which is
the parent AtmIf's instance number.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.114.9.7.13.1.1 |
mscAtmIfVptPnniVProvTableThis group contains the provisionable attributes for the Pnni
component which are specific to virtual PNNI interfaces. SEQUENCE OF MscAtmIfVptPnniVProvEntry .1.3.6.1.4.1.562.36.2.1.114.9.7.14 |
mscAtmIfVptPnniVProvEntryAn entry in the mscAtmIfVptPnniVProvTable. MscAtmIfVptPnniVProvEntry .1.3.6.1.4.1.562.36.2.1.114.9.7.14.1 |
mscAtmIfVptPnniVpciThis attribute specifies the Virtual Path Connection Identifier
(VPCI) to be used between this signalling entity and its peer. The
VPCI of the peer virtual PNNI must have the same value for
switched connections to be set up across the interface.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.114.9.7.14.1.1 |
mscAtmIfPnni OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.114.96 |
mscAtmIfPnniRowStatusTableThis entry controls the addition and deletion of
mscAtmIfPnni components. SEQUENCE OF MscAtmIfPnniRowStatusEntry .1.3.6.1.4.1.562.36.2.1.114.96.1 |
mscAtmIfPnniRowStatusEntryA single entry in the table represents a single
mscAtmIfPnni component. MscAtmIfPnniRowStatusEntry .1.3.6.1.4.1.562.36.2.1.114.96.1.1 |
mscAtmIfPnniRowStatusThis variable is used as the basis for SNMP naming of
mscAtmIfPnni components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.96.1.1.1 |
mscAtmIfPnniComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.96.1.1.2 |
mscAtmIfPnniStorageTypeThis variable represents the storage type value for the
mscAtmIfPnni tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.96.1.1.4 |
mscAtmIfPnniIndexThis variable represents the index for the mscAtmIfPnni tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.114.96.1.1.10 |
mscAtmIfPnniSig OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.114.96.2 |
mscAtmIfPnniSigRowStatusTableThis entry controls the addition and deletion of
mscAtmIfPnniSig components. SEQUENCE OF MscAtmIfPnniSigRowStatusEntry .1.3.6.1.4.1.562.36.2.1.114.96.2.1 |
mscAtmIfPnniSigRowStatusEntryA single entry in the table represents a single
mscAtmIfPnniSig component. MscAtmIfPnniSigRowStatusEntry .1.3.6.1.4.1.562.36.2.1.114.96.2.1.1 |
mscAtmIfPnniSigRowStatusThis variable is used as the basis for SNMP naming of
mscAtmIfPnniSig components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.96.2.1.1.1 |
mscAtmIfPnniSigComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.96.2.1.1.2 |
mscAtmIfPnniSigStorageTypeThis variable represents the storage type value for the
mscAtmIfPnniSig tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.96.2.1.1.4 |
mscAtmIfPnniSigIndexThis variable represents the index for the mscAtmIfPnniSig tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.114.96.2.1.1.10 |
mscAtmIfPnniSigVcd OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.114.96.2.2 |
mscAtmIfPnniSigVcdRowStatusTableThis entry controls the addition and deletion of
mscAtmIfPnniSigVcd components. SEQUENCE OF MscAtmIfPnniSigVcdRowStatusEntry .1.3.6.1.4.1.562.36.2.1.114.96.2.2.1 |
mscAtmIfPnniSigVcdRowStatusEntryA single entry in the table represents a single
mscAtmIfPnniSigVcd component. MscAtmIfPnniSigVcdRowStatusEntry .1.3.6.1.4.1.562.36.2.1.114.96.2.2.1.1 |
mscAtmIfPnniSigVcdRowStatusThis variable is used as the basis for SNMP naming of
mscAtmIfPnniSigVcd components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.96.2.2.1.1.1 |
mscAtmIfPnniSigVcdComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.96.2.2.1.1.2 |
mscAtmIfPnniSigVcdStorageTypeThis variable represents the storage type value for the
mscAtmIfPnniSigVcd tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.96.2.2.1.1.4 |
mscAtmIfPnniSigVcdIndexThis variable represents the index for the mscAtmIfPnniSigVcd tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.114.96.2.2.1.1.10 |
mscAtmIfPnniSigVcdProvTableThis group contains the provisionable traffic attributes for a control
channel. SEQUENCE OF MscAtmIfPnniSigVcdProvEntry .1.3.6.1.4.1.562.36.2.1.114.96.2.2.10 |
mscAtmIfPnniSigVcdProvEntryAn entry in the mscAtmIfPnniSigVcdProvTable. MscAtmIfPnniSigVcdProvEntry .1.3.6.1.4.1.562.36.2.1.114.96.2.2.10.1 |
mscAtmIfPnniSigVcdTrafficDescTypeThis attribute specifies the type of traffic management which is
applied to both the transmit and receive direction of this connection
as defined in the ATM Forum. The trafficDescType determines the
number and meaning of the parameters in the trafficDescParm
attribute.rw Enumeration .1.3.6.1.4.1.562.36.2.1.114.96.2.2.10.1.1 |
mscAtmIfPnniSigVcdAtmServiceCategoryThis attribute specifies the ATM service category for both directions
of the connection.
The constantBitRate service category is intended for real time
applications, that is those requiring tightly constrained delay and
delay variation, as would be appropriate for voice and video
applications. The consistent availability of a fixed quantity of
bandwidth is considered appropriate for CBR service. Cells which
are delayed beyond the value specified by CellTransfer Delay are
assumed to be of significantly reduce value to the application.
The rtVariableBitRate service category is intended for real time
applications, that is those requiring tightly constrained delay and
delay variation, as would be appropriate for voice and video
applications. Sources are expected to transmit at a rate which varies
with time. Equivalently, the source can be described as 'bursty'.
Cells which are delayed beyond the value specified by CTD are
assumed to be of significantly reduced value to the application. Real
time VBR service may support statistical multiplexing of real time
sources.
The nrtVariableBitRate service category is intended for non-real
time applications which have bursty traffic characteristics and which
can be characterized in terms of a PCR, SCR, and MBS. For those
cells which are transferred within the traffic contract, the application
expects a low cell loss ratio. For all connections, it expects a bound
on the mean cell transfer delay. Non-real time VBR service may
support statistical multiplexing of connections.
The unspecifiedBitRate service is intended for non-real time
applications; that is, those not requiring tightly constrained delay
and delay variation. UBR sources are expected to be bursty. UBR
service supports a high degree of statistical multiplexing among
sources. UBR service does not specify traffic related service
guarantees. No numerical commitments are made with respect to
the cell loss ratio experienced by a UBR connection, or as to the
cell transfer delay experienced by cells on the connection.rw Enumeration .1.3.6.1.4.1.562.36.2.1.114.96.2.2.10.1.3 |
mscAtmIfPnniSigVcdWeightThis attribute specifies an override for the weight of this unshaped
connection. This attribute is ignored for shaped connections, for
ABR connections, for connections on a CQC-based ATM FP and
basic VPTs.
When the value is set to sameAsCa, the weight is determined by the
weight policy attribute under the CA service category component
for all but standard VPT VCCs. For standard VPT VCCs, the
weight is determined by the VCC's service category, when the value
is set to sameAsCa.
When this attribute is set to a value from 1 to 4095, that value is
used for the weight policy of this connection relative to other
connections. For all but standard VPT VCCs, weight policy
determines the proportion of transit cell opportunities which are
allocated to this connection, compared to other connections in the
same service category. For standard VPT VCCs, weight policy
determines the proportion of transmit cell opportunities which are
allocated to this connection, compared to other connections
associated with the VPT.
When the value is set to upToQueueLimit, the weight policy is
limited only by the txQueueLimit.
VALUES (
0 = upToQueueLimit
65535 = sameAsCa
)rw Unsigned32 (0 | 1..4095 | 65535) .1.3.6.1.4.1.562.36.2.1.114.96.2.2.10.1.4 |
mscAtmIfPnniSigVcdQosClassThis attribute specifies the quality of service for both the forward
and backward direction for this connection.
Class 1 supports a QOS that meets Service Class A performance
requirements (Circuit emulation, constant bit rate video).
Class 2 supports a QOS that meets Service Class B performance
requirements (Variable bit rate audio and video).
Class 3 supports a QOS that meets Service Class C performance
requirements (Connection-Oriented Data Transfer).
Class 4 supports a QOS that meets Service Class D performance
requirements (Connectionless Data Transfer).
Class 0 is the unspecified bit rate QOS class; no objective is
specified for the performance parameters.rw Enumeration .1.3.6.1.4.1.562.36.2.1.114.96.2.2.10.1.21 |
mscAtmIfPnniSigVcdTrafficShapingThis attribute specifies whether this connection uses traffic shaping
when transmitting traffic to the ATM interface.
When sameAsCa is selected, traffic shaping for this connection is
based on the trafficShaping attribute of the connection's service
category component under the AtmIf CA. If the service category has
traffic shaping enabled, then traffic shaping is enabled for the
connection. Note that enabling traffic shaping may have no effect
under certain cases. These cases are listed in the description of the
trafficShaping operational attribute, which is under the Vcc Tm and
Vpc Tm components.
When disabled is selected, traffic shaping for this connection is
disabled.rw Enumeration .1.3.6.1.4.1.562.36.2.1.114.96.2.2.10.1.50 |
mscAtmIfPnniSigVcdUnshapedTransmitQueueingThis attribute only applies when this connection is unshaped. This
attribute specifies the transmit queueing method for this connection
if it is unshaped. Refer to the unshapedTransmitQueueing attribute
under the AtmIf CA service category subcomponent for more details
on the meaning of this attribute.
When this attribute is set to sameAsCa, the transmit queueing
method for the connection is based on the
unshapedTransmitQueueing attribute of the connection's service
category component under the ConnectionAdministrator.
When this attribute is set to common, transmit traffic on this
unshaped connection is destined for the common queue.
The value sameAsInterface is for migration from previous software
releases, but should no longer be usedrw Enumeration .1.3.6.1.4.1.562.36.2.1.114.96.2.2.10.1.60 |
mscAtmIfPnniSigVcdUsageParameterControlThis attribute specifies whether this connection enforces usage
parameter control when receiving traffic from the ATM interface.
When sameAsCa is selected, UPC for the connection is based on
the usageParameterControl attribute of the connection's service
category component under the ConnectionAdministrator. If the
service category has UPC enabled, then UPC is enabled for the
connection. Note that enabling UPC may have no effect under
certain cases. These cases are listed in the description of the
usageParameterControl operational attribute, which is under the
Vcc Tm or Vpc Tm component.
When disabled is selected, UPC for this connection is disabled.
The value sameAsInterface is for migration from previous software
releases, but should no longer be usedrw Enumeration .1.3.6.1.4.1.562.36.2.1.114.96.2.2.10.1.70 |
mscAtmIfPnniSigVcdTdpTableThis attribute is a vector of five traffic parameters whose meanings
are defined by the trafficDescType attribute. The values of peak cell
rate (PCR), sustained cell rate (SCR) and requested shaping rate are
expressed in cell/s. Maximum burst size (MBS) is expressed in
cells. CDVT is expressed in microseconds. The values of PCR,
SCR, MBS and CDVT are used for connection admission control
(CAC). The value of CDVT is only used for connections where the
atmServiceCategory is constantBitRate. For all other values of
atmServiceCategory, CDVT is ignored. The values of PCR, SCR
and requested shaping rate are used to determine the actual shaping
rate where traffic shaping is enabled.
When trafficDescType is 3, parameter 1 represents the PCR for CLP
equal to 0 and 1 traffic; parameter 4 represents the CDVT; and
parameter 5 represents the requested shaping rate. A non-zero value
in parameter 5 overrides any value in parameter 1. This result is
used as the PCR. Parameter 1 must be non-zero. Parameters 2 and 3
must be zero.
When trafficDescType is 6, parameter 1 represents the PCR for CLP
equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP
equal to 0 and 1 traffic; parameter 3 represents the MBS for CLP
equal to 0 and 1 traffic; parameter 4 represents the CDVT; and
parameter 5 represents the requested shaping rate. A non-zero value
in parameter 5 overrides any value in parameter 1. This result is
used as the PCR. Parameters 1, 2, and 3 must be non-zero.
Parameter 1 must be greater than or equal to parameter 2. Parameter
5 must either be zero (unused) or greater than or equal to parameter
2.
When trafficDescType is 7, parameter 1 represents the PCR for CLP
equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP
equal to 0 with cell discard; parameter 3 represents the MBS for
CLP equal to 0 traffic; parameter 4 represents the CDVT; and
parameter 5 represents the requested shaping rate. A non-zero value
in parameter 5 overrides any value in parameter 1. This result is
used as the PCR. Parameters 1, 2, and 3 must be non-zero.
Parameter 1 must be greater than or equal to parameter 2. Parameter
5 must either be zero (unused) or greater than or equal to parameter
2.
When trafficDescType is 8, parameter 1 represents the PCR for CLP
equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP
equal to 0 traffic with cell tagging; parameter 3 represents the MBS
for CLP equal to 0 traffic; parameter 4 represents the CDVT; and
parameter 5 represents the requested shaping rate. A non-zero value
in parameter 5 overrides any value in parameter 1. This result is
used as the PCR. Parameters 1, 2, and 3 must be non-zero.
Parameter 1 must be greater than or equal to parameter 2. Parameter
5 must either be zero (unused) or greater than or equal to parameter
2.
Whenever it is valid for PCR to be specified, parameter 5 may also
be used to specify a requested shaping rate. A non-zero value in
parameter 5 overrides the value in parameter 1 and is used as the
peak cell rate in calculations of CAC and shaping rate.
For trafficDescType 3 the traffic is shaped at the next rate less than
the PCR.
For trafficDescType 6, 7, and 8, the traffic is shaped at the highest
available rate which is between PCR and SCR. However, if there is
no available shaping rate between PCR and SCR, traffic is shaped at
the next rate above the PCR. SEQUENCE OF MscAtmIfPnniSigVcdTdpEntry .1.3.6.1.4.1.562.36.2.1.114.96.2.2.387 |
mscAtmIfPnniSigVcdTdpEntryAn entry in the mscAtmIfPnniSigVcdTdpTable. MscAtmIfPnniSigVcdTdpEntry .1.3.6.1.4.1.562.36.2.1.114.96.2.2.387.1 |
mscAtmIfPnniSigVcdTdpIndexThis variable represents the mscAtmIfPnniSigVcdTdpTable
specific index for the mscAtmIfPnniSigVcdTdpTable. Integer32 .1.3.6.1.4.1.562.36.2.1.114.96.2.2.387.1.1 |
mscAtmIfPnniSigVcdTdpValueThis variable represents an individual value for the
mscAtmIfPnniSigVcdTdpTable.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.114.96.2.2.387.1.2 |
mscAtmIfPnniSigProvTableThis attribute group contains the provisionable attributes for the
Signalling component. SEQUENCE OF MscAtmIfPnniSigProvEntry .1.3.6.1.4.1.562.36.2.1.114.96.2.10 |
mscAtmIfPnniSigProvEntryAn entry in the mscAtmIfPnniSigProvTable. MscAtmIfPnniSigProvEntry .1.3.6.1.4.1.562.36.2.1.114.96.2.10.1 |
mscAtmIfPnniSigVciThis attribute specifies the signalling channel number.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.114.96.2.10.1.1 |
mscAtmIfPnniSigAddressConversionThis attribute specifies the address conversion on the outgoing
signalling PDUs. The options are none, nativeE164, or nsap. The
none option is the default and if this option is chosen then nothing
is done to the address information element (IE) in the outgoing
signalling message. If nativeE164 option is chosen, then only
NSAP encapsulated E.164 addresses with zeros in the ESI are
converted to native E.164 format in the outgoing signalling
message. If the NSAP address is not encapsulated E.164 or the ESI
field is not zeros and the nativeE164 option is chosen, then the call
is cleared. If the nsap option is chosen, then native E.164 addresses
are converted to NSAP E.164 with zeros in the ESI field; otherwise
the address is in NSAP format and is not changed.rw Enumeration .1.3.6.1.4.1.562.36.2.1.114.96.2.10.1.2 |
mscAtmIfPnniSigOperatingModeThis attribute specifies the operating mode of the signaling channel.
provisionedOnly indicates that only SPVCs and SPVPs are
supported on the interface and SVCs are not supported. This value
is permitted only on UNI interfaces.
normal indicates that SVCs, SPVCs, and SPVPs are supported on
the interface.rw Enumeration .1.3.6.1.4.1.562.36.2.1.114.96.2.10.1.3 |
mscAtmIfPnniSigStateTableThis group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. SEQUENCE OF MscAtmIfPnniSigStateEntry .1.3.6.1.4.1.562.36.2.1.114.96.2.11 |
mscAtmIfPnniSigStateEntryAn entry in the mscAtmIfPnniSigStateTable. MscAtmIfPnniSigStateEntry .1.3.6.1.4.1.562.36.2.1.114.96.2.11.1 |
mscAtmIfPnniSigAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.114.96.2.11.1.1 |
mscAtmIfPnniSigOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.ro Enumeration .1.3.6.1.4.1.562.36.2.1.114.96.2.11.1.2 |
mscAtmIfPnniSigUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.ro Enumeration .1.3.6.1.4.1.562.36.2.1.114.96.2.11.1.3 |
mscAtmIfPnniSigOperTableThis attribute contains the operational attributes for the
AtmSignalling component. SEQUENCE OF MscAtmIfPnniSigOperEntry .1.3.6.1.4.1.562.36.2.1.114.96.2.12 |
mscAtmIfPnniSigOperEntryAn entry in the mscAtmIfPnniSigOperTable. MscAtmIfPnniSigOperEntry .1.3.6.1.4.1.562.36.2.1.114.96.2.12.1 |
mscAtmIfPnniSigLastTxCauseCodeThis attribute indicates the cause code in the last transmitted
signalling message that contains the CAUSE information element.
The cause code is used to describe the reason for generating certain
signalling messages.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.114.96.2.12.1.1 |
mscAtmIfPnniSigLastTxDiagCodeThis attribute contains the diagnostic code in the last transmitted
signalling message. The diagnostic code is contained in the CAUSE
information element and identifies an information element type or
timer type. The diagnostic code is present only if a procedural error
is detected by the signalling protocol. A diagnostic code is always
accompanied by the cause code. If there is no failure, this attribute
is set to 0.ro Hex .1.3.6.1.4.1.562.36.2.1.114.96.2.12.1.2 |
mscAtmIfPnniSigLastRxCauseCodeThis attribute contains the cause code in the last received signalling
message that contains the CAUSE information element. The cause
code is used to describe the reason for generating certain signalling
messages.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.114.96.2.12.1.3 |
mscAtmIfPnniSigLastRxDiagCodeThis attribute contains the diagnostic code in the last received
signalling message. The diagnostic code is contained in the CAUSE
information element and identifies an information element type or
timer type. The diagnostic code is present only if a procedural error
is detected by the signalling protocol. A diagnostic code is always
accompanied by the cause code. If there is no failure, this attribute
is set to 0.ro Hex .1.3.6.1.4.1.562.36.2.1.114.96.2.12.1.4 |
mscAtmIfPnniSigStatsTableThis attribute group contains the statistics associated with the
AtmSignalling component. SEQUENCE OF MscAtmIfPnniSigStatsEntry .1.3.6.1.4.1.562.36.2.1.114.96.2.13 |
mscAtmIfPnniSigStatsEntryAn entry in the mscAtmIfPnniSigStatsTable. MscAtmIfPnniSigStatsEntry .1.3.6.1.4.1.562.36.2.1.114.96.2.13.1 |
mscAtmIfPnniSigCurrentConnectionsThis attribute indicates the total number of currently active
connections.roobsolete Counter32 .1.3.6.1.4.1.562.36.2.1.114.96.2.13.1.1 |
mscAtmIfPnniSigPeakConnectionsThis attribute indicates the high water mark of active point-to-
point and point-to-multipoint connections.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.114.96.2.13.1.2 |
mscAtmIfPnniSigSuccessfulConnectionsThis attribute counts the total number of switched point-to-
point and point-to-multipoint connections that were successfully
established. The counter wraps to 0 when the maximum value is
exceeded.ro Counter32 .1.3.6.1.4.1.562.36.2.1.114.96.2.13.1.3 |
mscAtmIfPnniSigFailedConnectionsThis attribute counts the total number of switched connections that
were not successfully established.The counter wraps to 0 when the
maximum value is exceeded.ro Counter32 .1.3.6.1.4.1.562.36.2.1.114.96.2.13.1.4 |
mscAtmIfPnniSigTxPdusThis attribute counts the number of transmitted signalling
PDUs.The counter wraps to 0 when the maximum value is
exceeded.ro Counter32 .1.3.6.1.4.1.562.36.2.1.114.96.2.13.1.5 |
mscAtmIfPnniSigRxPdusThis attribute counts the number of received signalling PDUs.The
counter wraps to 0 when the maximum value is exceeded.ro Counter32 .1.3.6.1.4.1.562.36.2.1.114.96.2.13.1.6 |
mscAtmIfPnniSigCurrentPmpConnectionsThis attribute indicates the number of currently active point-to-
multipoint connections.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.114.96.2.13.1.7 |
mscAtmIfPnniSigPeakPmpConnectionsThis attribute indicates the high water mark of active point-to-
multipoint connections.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.114.96.2.13.1.8 |
mscAtmIfPnniSigSuccessfulPmpConnectionsThis attribute counts the total number of switched point-to-
multipoint connections that were successfully established.
The counter wraps to 0 when the maximum value is
exceeded.ro Counter32 .1.3.6.1.4.1.562.36.2.1.114.96.2.13.1.9 |
mscAtmIfPnniSigFailedPmpConnectionsThis attribute counts the number of switched point-to-
multipoint connections that were not successfully
established.The counter wraps to 0 when the maximum value
is exceeded.ro Counter32 .1.3.6.1.4.1.562.36.2.1.114.96.2.13.1.10 |
mscAtmIfPnniSigNewCurrentConnectionsThis attribute indicates the total number of currently active point-to-
point and point-to-multipoint connections.ro Gauge32 .1.3.6.1.4.1.562.36.2.1.114.96.2.13.1.11 |
mscAtmIfPnniRcc OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.114.96.3 |
mscAtmIfPnniRccRowStatusTableThis entry controls the addition and deletion of
mscAtmIfPnniRcc components. SEQUENCE OF MscAtmIfPnniRccRowStatusEntry .1.3.6.1.4.1.562.36.2.1.114.96.3.1 |
mscAtmIfPnniRccRowStatusEntryA single entry in the table represents a single
mscAtmIfPnniRcc component. MscAtmIfPnniRccRowStatusEntry .1.3.6.1.4.1.562.36.2.1.114.96.3.1.1 |
mscAtmIfPnniRccRowStatusThis variable is used as the basis for SNMP naming of
mscAtmIfPnniRcc components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.96.3.1.1.1 |
mscAtmIfPnniRccComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.96.3.1.1.2 |
mscAtmIfPnniRccStorageTypeThis variable represents the storage type value for the
mscAtmIfPnniRcc tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.96.3.1.1.4 |
mscAtmIfPnniRccIndexThis variable represents the index for the mscAtmIfPnniRcc tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.114.96.3.1.1.10 |
mscAtmIfPnniRccVcd OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.114.96.3.2 |
mscAtmIfPnniRccVcdRowStatusTableThis entry controls the addition and deletion of
mscAtmIfPnniRccVcd components. SEQUENCE OF MscAtmIfPnniRccVcdRowStatusEntry .1.3.6.1.4.1.562.36.2.1.114.96.3.2.1 |
mscAtmIfPnniRccVcdRowStatusEntryA single entry in the table represents a single
mscAtmIfPnniRccVcd component. MscAtmIfPnniRccVcdRowStatusEntry .1.3.6.1.4.1.562.36.2.1.114.96.3.2.1.1 |
mscAtmIfPnniRccVcdRowStatusThis variable is used as the basis for SNMP naming of
mscAtmIfPnniRccVcd components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.96.3.2.1.1.1 |
mscAtmIfPnniRccVcdComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.96.3.2.1.1.2 |
mscAtmIfPnniRccVcdStorageTypeThis variable represents the storage type value for the
mscAtmIfPnniRccVcd tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.96.3.2.1.1.4 |
mscAtmIfPnniRccVcdIndexThis variable represents the index for the mscAtmIfPnniRccVcd tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.114.96.3.2.1.1.10 |
mscAtmIfPnniRccVcdProvTableThis group contains the provisionable traffic attributes for a control
channel. SEQUENCE OF MscAtmIfPnniRccVcdProvEntry .1.3.6.1.4.1.562.36.2.1.114.96.3.2.10 |
mscAtmIfPnniRccVcdProvEntryAn entry in the mscAtmIfPnniRccVcdProvTable. MscAtmIfPnniRccVcdProvEntry .1.3.6.1.4.1.562.36.2.1.114.96.3.2.10.1 |
mscAtmIfPnniRccVcdTrafficDescTypeThis attribute specifies the type of traffic management which is
applied to both the transmit and receive direction of this connection
as defined in the ATM Forum. The trafficDescType determines the
number and meaning of the parameters in the trafficDescParm
attribute.rw Enumeration .1.3.6.1.4.1.562.36.2.1.114.96.3.2.10.1.1 |
mscAtmIfPnniRccVcdAtmServiceCategoryThis attribute specifies the ATM service category for both directions
of the connection.
The constantBitRate service category is intended for real time
applications, that is those requiring tightly constrained delay and
delay variation, as would be appropriate for voice and video
applications. The consistent availability of a fixed quantity of
bandwidth is considered appropriate for CBR service. Cells which
are delayed beyond the value specified by CellTransfer Delay are
assumed to be of significantly reduce value to the application.
The rtVariableBitRate service category is intended for real time
applications, that is those requiring tightly constrained delay and
delay variation, as would be appropriate for voice and video
applications. Sources are expected to transmit at a rate which varies
with time. Equivalently, the source can be described as 'bursty'.
Cells which are delayed beyond the value specified by CTD are
assumed to be of significantly reduced value to the application. Real
time VBR service may support statistical multiplexing of real time
sources.
The nrtVariableBitRate service category is intended for non-real
time applications which have bursty traffic characteristics and which
can be characterized in terms of a PCR, SCR, and MBS. For those
cells which are transferred within the traffic contract, the application
expects a low cell loss ratio. For all connections, it expects a bound
on the mean cell transfer delay. Non-real time VBR service may
support statistical multiplexing of connections.
The unspecifiedBitRate service is intended for non-real time
applications; that is, those not requiring tightly constrained delay
and delay variation. UBR sources are expected to be bursty. UBR
service supports a high degree of statistical multiplexing among
sources. UBR service does not specify traffic related service
guarantees. No numerical commitments are made with respect to
the cell loss ratio experienced by a UBR connection, or as to the
cell transfer delay experienced by cells on the connection.rw Enumeration .1.3.6.1.4.1.562.36.2.1.114.96.3.2.10.1.3 |
mscAtmIfPnniRccVcdWeightThis attribute specifies an override for the weight of this unshaped
connection. This attribute is ignored for shaped connections, for
ABR connections, for connections on a CQC-based ATM FP and
basic VPTs.
When the value is set to sameAsCa, the weight is determined by the
weight policy attribute under the CA service category component
for all but standard VPT VCCs. For standard VPT VCCs, the
weight is determined by the VCC's service category, when the value
is set to sameAsCa.
When this attribute is set to a value from 1 to 4095, that value is
used for the weight policy of this connection relative to other
connections. For all but standard VPT VCCs, weight policy
determines the proportion of transit cell opportunities which are
allocated to this connection, compared to other connections in the
same service category. For standard VPT VCCs, weight policy
determines the proportion of transmit cell opportunities which are
allocated to this connection, compared to other connections
associated with the VPT.
When the value is set to upToQueueLimit, the weight policy is
limited only by the txQueueLimit.
VALUES (
0 = upToQueueLimit
65535 = sameAsCa
)rw Unsigned32 (0 | 1..4095 | 65535) .1.3.6.1.4.1.562.36.2.1.114.96.3.2.10.1.4 |
mscAtmIfPnniRccVcdQosClassThis attribute specifies the quality of service for both the forward
and backward direction for this connection.
Class 1 supports a QOS that meets Service Class A performance
requirements (Circuit emulation, constant bit rate video).
Class 2 supports a QOS that meets Service Class B performance
requirements (Variable bit rate audio and video).
Class 3 supports a QOS that meets Service Class C performance
requirements (Connection-Oriented Data Transfer).
Class 4 supports a QOS that meets Service Class D performance
requirements (Connectionless Data Transfer).
Class 0 is the unspecified bit rate QOS class; no objective is
specified for the performance parameters.rw Enumeration .1.3.6.1.4.1.562.36.2.1.114.96.3.2.10.1.21 |
mscAtmIfPnniRccVcdTrafficShapingThis attribute specifies whether this connection uses traffic shaping
when transmitting traffic to the ATM interface.
When sameAsCa is selected, traffic shaping for this connection is
based on the trafficShaping attribute of the connection's service
category component under the AtmIf CA. If the service category has
traffic shaping enabled, then traffic shaping is enabled for the
connection. Note that enabling traffic shaping may have no effect
under certain cases. These cases are listed in the description of the
trafficShaping operational attribute, which is under the Vcc Tm and
Vpc Tm components.
When disabled is selected, traffic shaping for this connection is
disabled.rw Enumeration .1.3.6.1.4.1.562.36.2.1.114.96.3.2.10.1.50 |
mscAtmIfPnniRccVcdUnshapedTransmitQueueingThis attribute only applies when this connection is unshaped. This
attribute specifies the transmit queueing method for this connection
if it is unshaped. Refer to the unshapedTransmitQueueing attribute
under the AtmIf CA service category subcomponent for more details
on the meaning of this attribute.
When this attribute is set to sameAsCa, the transmit queueing
method for the connection is based on the
unshapedTransmitQueueing attribute of the connection's service
category component under the ConnectionAdministrator.
When this attribute is set to common, transmit traffic on this
unshaped connection is destined for the common queue.
The value sameAsInterface is for migration from previous software
releases, but should no longer be usedrw Enumeration .1.3.6.1.4.1.562.36.2.1.114.96.3.2.10.1.60 |
mscAtmIfPnniRccVcdUsageParameterControlThis attribute specifies whether this connection enforces usage
parameter control when receiving traffic from the ATM interface.
When sameAsCa is selected, UPC for the connection is based on
the usageParameterControl attribute of the connection's service
category component under the ConnectionAdministrator. If the
service category has UPC enabled, then UPC is enabled for the
connection. Note that enabling UPC may have no effect under
certain cases. These cases are listed in the description of the
usageParameterControl operational attribute, which is under the
Vcc Tm or Vpc Tm component.
When disabled is selected, UPC for this connection is disabled.
The value sameAsInterface is for migration from previous software
releases, but should no longer be usedrw Enumeration .1.3.6.1.4.1.562.36.2.1.114.96.3.2.10.1.70 |
mscAtmIfPnniRccVcdTdpTableThis attribute is a vector of five traffic parameters whose meanings
are defined by the trafficDescType attribute. The values of peak cell
rate (PCR), sustained cell rate (SCR) and requested shaping rate are
expressed in cell/s. Maximum burst size (MBS) is expressed in
cells. CDVT is expressed in microseconds. The values of PCR,
SCR, MBS and CDVT are used for connection admission control
(CAC). The value of CDVT is only used for connections where the
atmServiceCategory is constantBitRate. For all other values of
atmServiceCategory, CDVT is ignored. The values of PCR, SCR
and requested shaping rate are used to determine the actual shaping
rate where traffic shaping is enabled.
When trafficDescType is 3, parameter 1 represents the PCR for CLP
equal to 0 and 1 traffic; parameter 4 represents the CDVT; and
parameter 5 represents the requested shaping rate. A non-zero value
in parameter 5 overrides any value in parameter 1. This result is
used as the PCR. Parameter 1 must be non-zero. Parameters 2 and 3
must be zero.
When trafficDescType is 6, parameter 1 represents the PCR for CLP
equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP
equal to 0 and 1 traffic; parameter 3 represents the MBS for CLP
equal to 0 and 1 traffic; parameter 4 represents the CDVT; and
parameter 5 represents the requested shaping rate. A non-zero value
in parameter 5 overrides any value in parameter 1. This result is
used as the PCR. Parameters 1, 2, and 3 must be non-zero.
Parameter 1 must be greater than or equal to parameter 2. Parameter
5 must either be zero (unused) or greater than or equal to parameter
2.
When trafficDescType is 7, parameter 1 represents the PCR for CLP
equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP
equal to 0 with cell discard; parameter 3 represents the MBS for
CLP equal to 0 traffic; parameter 4 represents the CDVT; and
parameter 5 represents the requested shaping rate. A non-zero value
in parameter 5 overrides any value in parameter 1. This result is
used as the PCR. Parameters 1, 2, and 3 must be non-zero.
Parameter 1 must be greater than or equal to parameter 2. Parameter
5 must either be zero (unused) or greater than or equal to parameter
2.
When trafficDescType is 8, parameter 1 represents the PCR for CLP
equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP
equal to 0 traffic with cell tagging; parameter 3 represents the MBS
for CLP equal to 0 traffic; parameter 4 represents the CDVT; and
parameter 5 represents the requested shaping rate. A non-zero value
in parameter 5 overrides any value in parameter 1. This result is
used as the PCR. Parameters 1, 2, and 3 must be non-zero.
Parameter 1 must be greater than or equal to parameter 2. Parameter
5 must either be zero (unused) or greater than or equal to parameter
2.
Whenever it is valid for PCR to be specified, parameter 5 may also
be used to specify a requested shaping rate. A non-zero value in
parameter 5 overrides the value in parameter 1 and is used as the
peak cell rate in calculations of CAC and shaping rate.
For trafficDescType 3 the traffic is shaped at the next rate less than
the PCR.
For trafficDescType 6, 7, and 8, the traffic is shaped at the highest
available rate which is between PCR and SCR. However, if there is
no available shaping rate between PCR and SCR, traffic is shaped at
the next rate above the PCR. SEQUENCE OF MscAtmIfPnniRccVcdTdpEntry .1.3.6.1.4.1.562.36.2.1.114.96.3.2.387 |
mscAtmIfPnniRccVcdTdpEntryAn entry in the mscAtmIfPnniRccVcdTdpTable. MscAtmIfPnniRccVcdTdpEntry .1.3.6.1.4.1.562.36.2.1.114.96.3.2.387.1 |
mscAtmIfPnniRccVcdTdpIndexThis variable represents the mscAtmIfPnniRccVcdTdpTable
specific index for the mscAtmIfPnniRccVcdTdpTable. Integer32 .1.3.6.1.4.1.562.36.2.1.114.96.3.2.387.1.1 |
mscAtmIfPnniRccVcdTdpValueThis variable represents an individual value for the
mscAtmIfPnniRccVcdTdpTable.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.114.96.3.2.387.1.2 |
mscAtmIfPnniRccProvTableThis group contains the generic provisionable attributes of an Rcc
component. SEQUENCE OF MscAtmIfPnniRccProvEntry .1.3.6.1.4.1.562.36.2.1.114.96.3.10 |
mscAtmIfPnniRccProvEntryAn entry in the mscAtmIfPnniRccProvTable. MscAtmIfPnniRccProvEntry .1.3.6.1.4.1.562.36.2.1.114.96.3.10.1 |
mscAtmIfPnniRccVciThis attribute specifies the VCI for the Routing Control Channel
(RCC). It is not recommended that the value be changed from the
default of 18 unless absolutely necessary. If a different VCI is
specified, ensure that the RCC at the far end is provisioned to use
the same VCI, otherwise the RCC will not come up.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.114.96.3.10.1.1 |
mscAtmIfPnniRccHlParmsTableThis group contains the provisionable Hello protocol parameters for
an Rcc component. SEQUENCE OF MscAtmIfPnniRccHlParmsEntry .1.3.6.1.4.1.562.36.2.1.114.96.3.11 |
mscAtmIfPnniRccHlParmsEntryAn entry in the mscAtmIfPnniRccHlParmsTable. MscAtmIfPnniRccHlParmsEntry .1.3.6.1.4.1.562.36.2.1.114.96.3.11.1 |
mscAtmIfPnniRccHelloHoldDownThis attribute is used to limit the rate at which this node sends out
Hello packets. Specifically, it specifies the minimum time between
successive Hellos.
A value of 0 specifies that the value provisioned for the
helloHoldDown attribute of the ARtg Pnni component should be
used.rw FixedPoint1 .1.3.6.1.4.1.562.36.2.1.114.96.3.11.1.1 |
mscAtmIfPnniRccHelloIntervalThis attribute specifies the duration of the Hello Timer. Every
helloInterval seconds, this node will send out a Hello packet to the
neighbor node, subject to the helloHoldDown timer having expired
at least once since the last Hello packet was sent.
A value of 0 specifies that the value provisioned for the
helloInterval attribute of the ARtg Pnni component should be used.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.114.96.3.11.1.2 |
mscAtmIfPnniRccHelloInactivityFactorThis attribute specifies the number of Hello intervals allowed to
pass without receiving a Hello from the neighbor node, before an
attempt is made to re-stage. The hello inactivity timer is enabled in
the oneWayInside, twoWayInside, oneWayOutside,
twoWayOutside and commonOutside hello states (see the
helloState attribute on the Rcc component for a description of these
states). Note that the value for the Hello interval used in the
calculation is the one specified in the Hello packet from the
neighbor node.
A value of 0 specifies that the value provisioned for the
helloInactivityFactor attribute of the ARtg Pnni component should
be used.
DESCRIPTIONrw Unsigned32 .1.3.6.1.4.1.562.36.2.1.114.96.3.11.1.3 |
mscAtmIfPnniRccStateTableThis group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. SEQUENCE OF MscAtmIfPnniRccStateEntry .1.3.6.1.4.1.562.36.2.1.114.96.3.12 |
mscAtmIfPnniRccStateEntryAn entry in the mscAtmIfPnniRccStateTable. MscAtmIfPnniRccStateEntry .1.3.6.1.4.1.562.36.2.1.114.96.3.12.1 |
mscAtmIfPnniRccAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.ro Enumeration .1.3.6.1.4.1.562.36.2.1.114.96.3.12.1.1 |
mscAtmIfPnniRccOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.ro Enumeration .1.3.6.1.4.1.562.36.2.1.114.96.3.12.1.2 |
mscAtmIfPnniRccUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.ro Enumeration .1.3.6.1.4.1.562.36.2.1.114.96.3.12.1.3 |
mscAtmIfPnniRccOperTableThis group contains the operational attributes for an Rcc
component. SEQUENCE OF MscAtmIfPnniRccOperEntry .1.3.6.1.4.1.562.36.2.1.114.96.3.13 |
mscAtmIfPnniRccOperEntryAn entry in the mscAtmIfPnniRccOperTable. MscAtmIfPnniRccOperEntry .1.3.6.1.4.1.562.36.2.1.114.96.3.13.1 |
mscAtmIfPnniRccTypeThis attribute indicates the role of this link in the PNNI hierarchy.
The following values are possible:
unknown: the Hello protocol has not yet determined the role of the
link.
lowestLevelHorizLink: the link is a horizontal link between two
lowest level nodes.
lowestLevelOutsideLink: the link is an outside link between two
border nodes.
horizontalLinkToLgn: the link is a horizontal link to a Logical
Group Node (LGN).
uplink: the link is a uplink to a higher level LGN.ro Enumeration .1.3.6.1.4.1.562.36.2.1.114.96.3.13.1.1 |
mscAtmIfPnniRccNegotiatedVersionThis attribute indicates the PNNI version negotiated with the
neighbor node.ro Enumeration .1.3.6.1.4.1.562.36.2.1.114.96.3.13.1.2 |
mscAtmIfPnniRccHelloStateThis attribute indicates the state of the Hello protocol exchange over
this link. The following are the possible values for this attribute:
down: the link is down; no PNNI routing packets will be sent over
or received over such a link. This is the initial state of the Hello
Finite State Machine, and can also be reached when lower-level
protocols have indicated that the link is not usable.
attempt: no Hello packets or Hello packets, with mismatch
information, have been received recently from the neighbor.
Attempts are made to contact the neighbor node by sending out
Hello packets every helloInterval seconds.
oneWayInside: Hello packets have been recently received from the
neighbor and it has been established that both nodes are members of
the same peer group, but the remote node ID and remote port ID in
the neighbor's Hello packets were set to zero. A Hello packet is sent
to the neighbor and the Hello timer is restarted.
twoWayInside: Bidirectional communication over this link between
this node and the neighbor node has been achieved.
oneWayOutside: Hello packets have been recently received from
the neighbor and it has been established that both nodes are
members of a different peer group, but the remote node ID and
remote port ID in the neighbor's Hello packets were set to zero.
twoWayOutside: Hellos have recently been received from the
neighbor indicating that the neighbor node belongs to a different
peer group. The correct remote node ID and remote port ID fields
were included in the Hello packet, but the nodal hierarchy list did
not include any common peer group. This state can also be reached
if a hierarchy mismatch occurs while in the commonOutside state.
commonOutside: A common level of the routing hierarchy has been
found, in addition to achieving full bi-directional communication
between the two nodes.ro Enumeration .1.3.6.1.4.1.562.36.2.1.114.96.3.13.1.3 |
mscAtmIfPnniRccRemoteNodeIdThis attribute indicates the neighbor node's node id.ro HexString .1.3.6.1.4.1.562.36.2.1.114.96.3.13.1.4 |
mscAtmIfPnniRccRemotePortIdThis attribute indicates the neighbor node's port id.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.114.96.3.13.1.5 |
mscAtmIfPnniRccStatsTableThis group contains the statistical attributes for an Rcc component. SEQUENCE OF MscAtmIfPnniRccStatsEntry .1.3.6.1.4.1.562.36.2.1.114.96.3.14 |
mscAtmIfPnniRccStatsEntryAn entry in the mscAtmIfPnniRccStatsTable. MscAtmIfPnniRccStatsEntry .1.3.6.1.4.1.562.36.2.1.114.96.3.14.1 |
mscAtmIfPnniRccHelloPacketsRxThis attribute counts the total number of Hello packets received
across this RCC, including bad and mismatched Hello packets. The
counter wraps when it exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.114.96.3.14.1.1 |
mscAtmIfPnniRccHelloPacketsTxThis attribute counts the total number of Hello packets transmitted
across this RCC. The counter wraps when it exceeds the maximum
value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.114.96.3.14.1.2 |
mscAtmIfPnniRccMismatchedHelloPacketsRxThis attribute counts the total number of mismatched Hello packets
received over this RCC. The counter wraps when it exceeds the
maximum value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.114.96.3.14.1.3 |
mscAtmIfPnniRccBadHelloPacketsRxThis attribute counts the total number of bad Hello packets received
over this RCC. The counter wraps when it exceeds the maximum
value.ro Counter32 .1.3.6.1.4.1.562.36.2.1.114.96.3.14.1.4 |
mscAtmIfPnniAddr OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.114.96.4 |
mscAtmIfPnniAddrRowStatusTableThis entry controls the addition and deletion of
mscAtmIfPnniAddr components. SEQUENCE OF MscAtmIfPnniAddrRowStatusEntry .1.3.6.1.4.1.562.36.2.1.114.96.4.1 |
mscAtmIfPnniAddrRowStatusEntryA single entry in the table represents a single
mscAtmIfPnniAddr component. MscAtmIfPnniAddrRowStatusEntry .1.3.6.1.4.1.562.36.2.1.114.96.4.1.1 |
mscAtmIfPnniAddrRowStatusThis variable is used as the basis for SNMP naming of
mscAtmIfPnniAddr components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.96.4.1.1.1 |
mscAtmIfPnniAddrComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.96.4.1.1.2 |
mscAtmIfPnniAddrStorageTypeThis variable represents the storage type value for the
mscAtmIfPnniAddr tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.96.4.1.1.4 |
mscAtmIfPnniAddrAddressIndexThis variable represents an index for the mscAtmIfPnniAddr tables. AsciiStringIndex .1.3.6.1.4.1.562.36.2.1.114.96.4.1.1.10 |
mscAtmIfPnniAddrAddressTypeIndexThis variable represents an index for the mscAtmIfPnniAddr tables. Enumeration .1.3.6.1.4.1.562.36.2.1.114.96.4.1.1.11 |
mscAtmIfPnniAddrTermSP OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.114.96.4.2 |
mscAtmIfPnniAddrTermSPRowStatusTableThis entry controls the addition and deletion of
mscAtmIfPnniAddrTermSP components. SEQUENCE OF MscAtmIfPnniAddrTermSPRowStatusEntry .1.3.6.1.4.1.562.36.2.1.114.96.4.2.1 |
mscAtmIfPnniAddrTermSPRowStatusEntryA single entry in the table represents a single
mscAtmIfPnniAddrTermSP component. MscAtmIfPnniAddrTermSPRowStatusEntry .1.3.6.1.4.1.562.36.2.1.114.96.4.2.1.1 |
mscAtmIfPnniAddrTermSPRowStatusThis variable is used as the basis for SNMP naming of
mscAtmIfPnniAddrTermSP components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.96.4.2.1.1.1 |
mscAtmIfPnniAddrTermSPComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.96.4.2.1.1.2 |
mscAtmIfPnniAddrTermSPStorageTypeThis variable represents the storage type value for the
mscAtmIfPnniAddrTermSP tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.96.4.2.1.1.4 |
mscAtmIfPnniAddrTermSPIndexThis variable represents the index for the mscAtmIfPnniAddrTermSP tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.114.96.4.2.1.1.10 |
mscAtmIfPnniAddrPnniInfo OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.114.96.4.3 |
mscAtmIfPnniAddrPnniInfoRowStatusTableThis entry controls the addition and deletion of
mscAtmIfPnniAddrPnniInfo components. SEQUENCE OF MscAtmIfPnniAddrPnniInfoRowStatusEntry .1.3.6.1.4.1.562.36.2.1.114.96.4.3.1 |
mscAtmIfPnniAddrPnniInfoRowStatusEntryA single entry in the table represents a single
mscAtmIfPnniAddrPnniInfo component. MscAtmIfPnniAddrPnniInfoRowStatusEntry .1.3.6.1.4.1.562.36.2.1.114.96.4.3.1.1 |
mscAtmIfPnniAddrPnniInfoRowStatusThis variable is used as the basis for SNMP naming of
mscAtmIfPnniAddrPnniInfo components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.96.4.3.1.1.1 |
mscAtmIfPnniAddrPnniInfoComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.96.4.3.1.1.2 |
mscAtmIfPnniAddrPnniInfoStorageTypeThis variable represents the storage type value for the
mscAtmIfPnniAddrPnniInfo tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.96.4.3.1.1.4 |
mscAtmIfPnniAddrPnniInfoIndexThis variable represents the index for the mscAtmIfPnniAddrPnniInfo tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.114.96.4.3.1.1.10 |
mscAtmIfPnniAddrPnniInfoProvTableThis attribute group contains the provisioned attributes relating to
PNNI for a PnniInfo component. SEQUENCE OF MscAtmIfPnniAddrPnniInfoProvEntry .1.3.6.1.4.1.562.36.2.1.114.96.4.3.10 |
mscAtmIfPnniAddrPnniInfoProvEntryAn entry in the mscAtmIfPnniAddrPnniInfoProvTable. MscAtmIfPnniAddrPnniInfoProvEntry .1.3.6.1.4.1.562.36.2.1.114.96.4.3.10.1 |
mscAtmIfPnniAddrPnniInfoScopeThis attribute specifies the scope of the ATM address, which is the
highest level up to which this address will be advertised in the
PNNI hierarchy. The scope must be set to a value numerically less
than or equal to the level of the lowest level peer group containing
this node. Setting the scope to 0 will cause the address to be
advertised globally within this PNNI routing domain.rw INTEGER (-1..104) .1.3.6.1.4.1.562.36.2.1.114.96.4.3.10.1.1 |
mscAtmIfPnniAddrPnniInfoReachabilityThis attribute indicates whether the address is internal or exterior.
An internal reachable address is an address of a destination that is
directly attached to the logical node advertising the address. An
exterior reachable address is an address that can be reached
through a PNNI routing domain, but which is not located in that
PNNI routing domain.rw Enumeration .1.3.6.1.4.1.562.36.2.1.114.96.4.3.10.1.2 |
mscAtmIfPnniAddrOperTableThis attribute group contains the operational attributes for the
Address component. SEQUENCE OF MscAtmIfPnniAddrOperEntry .1.3.6.1.4.1.562.36.2.1.114.96.4.10 |
mscAtmIfPnniAddrOperEntryAn entry in the mscAtmIfPnniAddrOperTable. MscAtmIfPnniAddrOperEntry .1.3.6.1.4.1.562.36.2.1.114.96.4.10.1 |
mscAtmIfPnniAddrScopeThis attribute indicates the scope of the ATM address, which is the
highest level to which this address will be advertised in the PNNI
hierarchy. If no PnniInfo subcomponent has been provisioned, then
the scope will default to the level of this node in the PNNI
hierarchy. If this node does not participate in a PNNI hierarchy, then
this attribute will have the value of -1.ro INTEGER (-1..104) .1.3.6.1.4.1.562.36.2.1.114.96.4.10.1.1 |
mscAtmIfPnniAddrReachabilityThis attribute indicates whether the address is internal or exterior.
An internal reachable address is an address of a destination that is
directly attached to the logical node advertising the address. An
exterior reachable address is an address that can be reached
through a PNNI routing domain, but which is not located in that
PNNI routing domain.ro Enumeration .1.3.6.1.4.1.562.36.2.1.114.96.4.10.1.2 |
mscAtmIfPnniProvTableThis group contains the provisionable attributes for the Pnni
component. SEQUENCE OF MscAtmIfPnniProvEntry .1.3.6.1.4.1.562.36.2.1.114.96.10 |
mscAtmIfPnniProvEntryAn entry in the mscAtmIfPnniProvTable. MscAtmIfPnniProvEntry .1.3.6.1.4.1.562.36.2.1.114.96.10.1 |
mscAtmIfPnniSoftPvcRetryPeriodThis attribute represents the time in seconds to wait between call
setup retries. The resolution is to the nearest 10 seconds.
This attribute has been obsoleted and is replaced by the
softPvpAndPvcRetryPeriod attribute.rwobsolete Unsigned32 .1.3.6.1.4.1.562.36.2.1.114.96.10.1.1 |
mscAtmIfPnniSoftPvpAndPvcRetryPeriodThis attribute represents the time in seconds to wait between soft
PVP or soft PVC call setup retries. The resolution is to the nearest
10 seconds.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.114.96.10.1.2 |
mscAtmIfPnniSoftPvpAndPvcHoldOffTimeThis attribute specifies how long to hold off retries following a
release or the connection. The resolution is to the nearest 50 ms.rw Unsigned32 (0 | 50..20000) .1.3.6.1.4.1.562.36.2.1.114.96.10.1.5 |
mscAtmIfPnniAdminWeightsTableThis group contains the provisionable administrative weights for the
Pnni component. These weights will be used by Generic
Connection Admission Control (GCAC) if administrative weight is
the selected optimization criterion. SEQUENCE OF MscAtmIfPnniAdminWeightsEntry .1.3.6.1.4.1.562.36.2.1.114.96.11 |
mscAtmIfPnniAdminWeightsEntryAn entry in the mscAtmIfPnniAdminWeightsTable. MscAtmIfPnniAdminWeightsEntry .1.3.6.1.4.1.562.36.2.1.114.96.11.1 |
mscAtmIfPnniCbrWeightThis attribute specifies the administrative weight assigned for
setting up switched calls with a service category of Constant Bit
Rate (CBR) for this PNNI interface. The value specified will be
used by Generic Connection Admission Control (GCAC) if
administrative weight is the selected optimization criterion; the
higher the value, the less desirable the link will be in path selection.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.114.96.11.1.1 |
mscAtmIfPnniRtVbrWeightThis attribute specifies the administrative weight assigned for
setting up switched calls with a service category of Real-Time
Variable Bit Rate (RT-VBR) for this PNNI interface. The value
specified will be used by Generic Connection Admission Control
(GCAC) if administrative weight is the selected optimization
criterion; the higher the value, the less desirable the link will be in
path selection.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.114.96.11.1.2 |
mscAtmIfPnniNrtVbrWeightThis attribute specifies the administrative weight assigned for
setting up switched calls with a service category of Non Real-Time
Variable Bit Rate (NRT-VBR) for this PNNI interface. The value
specified will be used by Generic Connection Admission Control
(GCAC) if administrative weight is the selected optimization
criterion; the higher the value, the less desirable the link will be in
path selection.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.114.96.11.1.3 |
mscAtmIfPnniUbrWeightThis attribute specifies the administrative weight assigned for
setting up switched calls with a service category of Unspecified Bit
Rate (UBR) for this PNNI interface. The value specified will be
used by Generic Connection Admission Control (GCAC) if
administrative weight is the selected optimization criterion; the
higher the value, the less desirable the link will be in path selection.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.114.96.11.1.4 |
mscAtmIfPnniAcctOptTableThis group contains the provisionable attributes for accounting. SEQUENCE OF MscAtmIfPnniAcctOptEntry .1.3.6.1.4.1.562.36.2.1.114.96.12 |
mscAtmIfPnniAcctOptEntryAn entry in the mscAtmIfPnniAcctOptTable. MscAtmIfPnniAcctOptEntry .1.3.6.1.4.1.562.36.2.1.114.96.12.1 |
mscAtmIfPnniAccountCollectionThis attribute is used to turn accounting on or off for SVC and
SPVC connections. It also specifies the reason(s) for which
accounting data is collected: billing, test, study, audit, or force.
If the set of reasons is not empty then accounting records will be
generated by this interface in the following situations:
- on a TODA changeover if TODA is enabled;
- every 12 hours (per connection) if TODA is disabled;
- on every call clear (a call record with final cell counts).
If none of the reasons is present, then accounting will be
suppressed.
The reason for collection is recorded in the accounting record, in
the attribute callingCollectReason or calledCollectReason as
appropriate.
Description of bits:
bill(0)
test(1)
study(2)
audit(3)
force(4)rw OCTET STRING .1.3.6.1.4.1.562.36.2.1.114.96.12.1.1 |
mscAtmIfPnniAccountConnectionTypeThis attribute specifies whether accounting records generated by
this interface should be marked as originating, terminating or
intermediate. This attribute, in combination with the direction of the
call, determines the value of attribute connPointType of the
accounting record and may be used by downstream accounting
processes to correlate the records.
If the value is origTerm then records generated for incoming calls
will be marked as originating and records generated for outgoing
calls will be marked as terminating.
If the value is intermediate then records generated for all calls will
be marked as intermediate.rw Enumeration .1.3.6.1.4.1.562.36.2.1.114.96.12.1.2 |
mscAtmIfPnniAccountClassThis attribute specifies the accounting class associated with the
interface. Its meaning is determined by the network operator.
Its value is simply recorded in the accounting records generated by
this interface, in the attribute callingServiceType or
calledServiceType as appropriate.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.114.96.12.1.3 |
mscAtmIfPnniServiceExchangeThis attribute specifies the data service exchange associated with
this interface. Its meaning is determined by the network operator.
Its value is simply recorded in the accounting records generated by
this interface, in the attribute callingDse or calledDse as
appropriate.rw Unsigned32 .1.3.6.1.4.1.562.36.2.1.114.96.12.1.4 |
mscAtmIfPnniOperationalTableThis group contains the operational attributes for a Pnni component. SEQUENCE OF MscAtmIfPnniOperationalEntry .1.3.6.1.4.1.562.36.2.1.114.96.13 |
mscAtmIfPnniOperationalEntryAn entry in the mscAtmIfPnniOperationalTable. MscAtmIfPnniOperationalEntry .1.3.6.1.4.1.562.36.2.1.114.96.13.1 |
mscAtmIfPnniPortIdThis attribute indicates the port id of the PNNI interface, which is
the parent AtmIf's instance number.ro Unsigned32 .1.3.6.1.4.1.562.36.2.1.114.96.13.1.1 |
atmPnniMIB OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.72 |
IMPORTS Unknown .1.3.6.1.4.1.562.36.2.2.72 |
atmPnniGroup OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.72.1 |
atmPnniGroupCA OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.72.1.1 |
atmPnniGroupCA02 OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.72.1.1.3 |
atmPnniGroupCA02A OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.72.1.1.3.2 |
atmPnniCapabilities OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.72.3 |
atmPnniCapabilitiesCA OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.72.3.1 |
atmPnniCapabilitiesCA02 OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.72.3.1.3 |
atmPnniCapabilitiesCA02A OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.72.3.1.3.2 |