Nortel-MsCarrier-MscPassport-AtmBearerServiceMIB
AI MIB Summary
Standard SNMP MIB module defining data structures for Nortel-MsCarrier-MscPassport-AtmBearerServiceMIB.
106
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
106 total| Object Name |
|---|
mscAtmIfVpcNrp OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.114.4.4 |
mscAtmIfVpcNrpRowStatusTableThis entry controls the addition and deletion of
mscAtmIfVpcNrp components. SEQUENCE OF MscAtmIfVpcNrpRowStatusEntry .1.3.6.1.4.1.562.36.2.1.114.4.4.1 |
mscAtmIfVpcNrpRowStatusEntryA single entry in the table represents a single
mscAtmIfVpcNrp component. MscAtmIfVpcNrpRowStatusEntry .1.3.6.1.4.1.562.36.2.1.114.4.4.1.1 |
mscAtmIfVpcNrpRowStatusThis variable is used as the basis for SNMP naming of
mscAtmIfVpcNrp components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.4.4.1.1.1 |
mscAtmIfVpcNrpComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.4.4.1.1.2 |
mscAtmIfVpcNrpStorageTypeThis variable represents the storage type value for the
mscAtmIfVpcNrp tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.4.4.1.1.4 |
mscAtmIfVpcNrpIndexThis variable represents the index for the mscAtmIfVpcNrp tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.114.4.4.1.1.10 |
mscAtmIfVpcNrpProvTableThis group contains the provisionable attributes for the Nrp
component. SEQUENCE OF MscAtmIfVpcNrpProvEntry .1.3.6.1.4.1.562.36.2.1.114.4.4.100 |
mscAtmIfVpcNrpProvEntryAn entry in the mscAtmIfVpcNrpProvTable. MscAtmIfVpcNrpProvEntry .1.3.6.1.4.1.562.36.2.1.114.4.4.100.1 |
mscAtmIfVpcNrpNextHopThis attribute specifies the Nrp component with which this Nrp is
associated. A sample value is AtmIf/31 Vcc/0.32 Nrp.rw Link .1.3.6.1.4.1.562.36.2.1.114.4.4.100.1.10 |
mscAtmIfVpcNrpConnectionPointTypeThis attribute specifies the connection point type desired for a Nrp
component. The actual connection point type value is visible in the
parent component's connectionPointType attribute.
The desired connection point type can be specified directly as a
segmentEndPoint or connectingPoint. If autoConfigure is
specified, the switch will select the connection point type based on
the type attribute of the associated AtmIf, choosing
segmentEndPoint for a UNI-type ATM interface and
connectingPoint for a PPI-type ATM interface.
It is obsoleted. The value is mapped into oamSegmentBoundary
attribute. segmentEndPoint is mapped into yes. connectingPoint is
mapped into no. autoConfigure is mapped into sameAsInterface.rwobsolete Enumeration .1.3.6.1.4.1.562.36.2.1.114.4.4.100.1.20 |
mscAtmIfVpcNrpOamSegmentBoundaryThis attribute specifies the OAM segment boundary desired for a
Nrp component. It affects the connection point type value visible in
the parent component's connectionPointType attribute.
The desired OAM segment boundary can be specified directly as
yes, no or sameAsInterface. If sameAsInterface is specified, the
OAM segment boundary is same as the oamSegmentBoundary
attribute of the associated AtmIf and the switch will set the
connectionPointType, choosing segmentEndPoint for a segment-
boundary ATM interface and connectingPoint for a non-segment-
boundary ATM interface.rw Enumeration .1.3.6.1.4.1.562.36.2.1.114.4.4.100.1.30 |
mscAtmIfVpcNrpTxAal5PartialPacketDiscardThis attribute is obsolete in P4.2 and has been migrated under Vcd
(Vpd) component.
This attribute specifies whether the AAL5 Partial Packet Discard
(PPD) feature has been enabled or disabled on the Nrp in the
transmit direction. This feature allows the NRP to discard the
remainder of a cell-forwarded AAL5 frame if a cell of this frame
has been discarded due to congestion. This increases the 'goodput'
of the link, since cells which are only going to be discarded by the
AAL5 reassembly are not transmitted.
When this attribute is set to enabled, the PPD feature is applied in
the transmit direction. It should only be enabled for connections
whose end points are performing AAL5 segmentation and
reassembly. When this attribute is set to disabled, the PPD feature is
not applied to traffic for this connection in the transmit direction.
Note that specifying enabled for a non-AAL5 connection will cause
all traffic to be discarded once congestion is encountered.rwobsolete Enumeration .1.3.6.1.4.1.562.36.2.1.114.4.4.100.1.31 |
mscAtmIfVpcNrpRxAal5PartialPacketDiscardThis attribute is obsolete in P4.2 and has been migrated under Vcd
(Vpd) component.
This attribute specifies whether the AAL5 Partial Packet Discard
(PPD) feature has been enabled or disabled on the Nrp in the
receive direction. This feature allows the NRP to discard the
remainder of a cell-forwarded AAL5 frame if a cell of this frame
has been discarded due to congestion or usage parameter control
(UPC). This increases the 'goodput' of the link, since cells which
are only going to be discarded by the AAL5 reassembly are not
transmitted.
When this attribute is set to enabled, the PPD feature is applied in
the receive direction. It should only be enabled for connections
whose end points are performing AAL5 segmentation and
reassembly. When this attribute is set to disabled, the PPD feature is
not applied to traffic for this connection in the receive direction.
When this attribute is set to sameAsTx, the PPD feature for traffic
in the receive direction will be configured the same way as it is in
the transmit direction.
Note that specifying enabled for a non-AAL5 connection will cause
all traffic to be discarded once congestion is encountered.rwobsolete Enumeration .1.3.6.1.4.1.562.36.2.1.114.4.4.100.1.32 |
mscAtmIfVpcNrpBandwidthElasticThis attribute is only of importance for connections which are
carried on a link with a variable bandwidth. For example, the
bandwidth may be reduced in the event that one or more physical
links in the IMA group fail, such that the originally requested
bandwidth cannot be maintained. This attribute shows whether the
application running on this connection can continue to operate if the
bandwidth is reduced. If the bandwidth is reduced, the amount by
which it is reduced will be displayed in the bandwidthReduction
attribute.
A value of yes, indicates that this connection is elastic, and the
bandwidth may be reduced but the connection will not be released.
Currently, this attribute should only be set to yes for situations
where this Nrp is functioning as a loopback on one side of an IMA
link. There are no other situations where this setting is valid.
A value of no indicates that the bandwidth for this connection will
not be reduced in the event of link bandwidth reduction. However,
this connection may be released based on its holdingPriority.rw Enumeration .1.3.6.1.4.1.562.36.2.1.114.4.4.100.1.33 |
mscAtmIfVpcNrpOverrideHoldingPriorityThis attribute specifies the holding priority of this connection.
Holding priority is used when there is an IMA group where some
physical links have failed. Holding priority determines the order in
which connections are released. 4 is the lowest holding priority and
is released first. 0 is a higher priority and is released last. The value
specified in this attribute will override whatever holdingPriority that
has been provisioned at the Vcd (or Vpd). If the value is left at the
default of noOverride, the holdingPriority provisioned at the Vcd
(or Vpd) will be used.rw Enumeration .1.3.6.1.4.1.562.36.2.1.114.4.4.100.1.34 |
mscAtmIfVpcMnrp OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.114.4.12 |
mscAtmIfVpcMnrpRowStatusTableThis entry controls the addition and deletion of
mscAtmIfVpcMnrp components. SEQUENCE OF MscAtmIfVpcMnrpRowStatusEntry .1.3.6.1.4.1.562.36.2.1.114.4.12.1 |
mscAtmIfVpcMnrpRowStatusEntryA single entry in the table represents a single
mscAtmIfVpcMnrp component. MscAtmIfVpcMnrpRowStatusEntry .1.3.6.1.4.1.562.36.2.1.114.4.12.1.1 |
mscAtmIfVpcMnrpRowStatusThis variable is used as the basis for SNMP naming of
mscAtmIfVpcMnrp components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.4.12.1.1.1 |
mscAtmIfVpcMnrpComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.4.12.1.1.2 |
mscAtmIfVpcMnrpStorageTypeThis variable represents the storage type value for the
mscAtmIfVpcMnrp tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.4.12.1.1.4 |
mscAtmIfVpcMnrpIndexThis variable represents the index for the mscAtmIfVpcMnrp tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.114.4.12.1.1.10 |
mscAtmIfVpcMnrpProvTableThis group contains the provisionable attributes for the Mnrp
component. SEQUENCE OF MscAtmIfVpcMnrpProvEntry .1.3.6.1.4.1.562.36.2.1.114.4.12.101 |
mscAtmIfVpcMnrpProvEntryAn entry in the mscAtmIfVpcMnrpProvTable. MscAtmIfVpcMnrpProvEntry .1.3.6.1.4.1.562.36.2.1.114.4.12.101.1 |
mscAtmIfVpcMnrpOamSegmentBoundaryThis attribute specifies the OAM segment boundary desired for a
Mnrp component. It affects the connection point type value visible
in the parent component's connectionPointType attribute.
The desired OAM segment boundary can be specified directly as
yes, no or sameAsInterface. If sameAsInterface is specified, the
OAM segment boundary is same as the oamSegmentBoundary
attribute of the associated AtmIf and the switch will set the
connectionPointType, choosing segmentEndPoint for a segment-
boundary ATM interface and connectingPoint for a non-segment-
boundary ATM interface.rw Enumeration .1.3.6.1.4.1.562.36.2.1.114.4.12.101.1.30 |
mscAtmIfVpcMnrpBandwidthElasticThis attribute is only of importance for connections which are
carried on a link with a variable bandwidth. For example, the
bandwidth may be reduced in the event that one or more physical
links in the IMA group fail, such that the originally requested
bandwidth cannot be maintained. This attribute shows whether the
application running on this connection can continue to operate if the
bandwidth is reduced. If the bandwidth is reduced, the amount by
which it is reduced will be displayed in the bandwidthReduction
attribute.
A value of yes, indicates that this connection is elastic, and the
bandwidth may be reduced but the connection will not be released.
Currently, this attribute should only be set to yes for situations
where this Mnrp is functioning as a loopback on one side of an IMA
link. There are no other situations where this setting is valid.
A value of no indicates that the bandwidth for this connection will
not be reduced in the event of link bandwidth reduction. However,
this connection may be released based on its holdingPriority.rw Enumeration .1.3.6.1.4.1.562.36.2.1.114.4.12.101.1.33 |
mscAtmIfVpcMnrpOverrideHoldingPriorityThis attribute specifies the holding priority of this connection.
Holding priority is used when there is an IMA group where some
physical links have failed. Holding priority determines the order in
which connections are released. 4 is the lowest holding priority and
is released first. 0 is a higher priority and is released last. The value
specified in this attribute will override whatever holdingPriority that
has been provisioned at the Vcd (or Vpd). If the value is left at the
default of noOverride, the holdingPriority provisioned at the Vcd
(or Vpd) will be used.rw Enumeration .1.3.6.1.4.1.562.36.2.1.114.4.12.101.1.34 |
mscAtmIfVpcMnrpNextHopsTableThis attribute specifies the list of Nrp components with which this
Mnrp is associated. A sample value is AtmIf/31 Vcc/0.32 Nrp. This
attribute must be provisioned with at least one Nrp component
under a compatible connection type. SEQUENCE OF MscAtmIfVpcMnrpNextHopsEntry .1.3.6.1.4.1.562.36.2.1.114.4.12.658 |
mscAtmIfVpcMnrpNextHopsEntryAn entry in the mscAtmIfVpcMnrpNextHopsTable. MscAtmIfVpcMnrpNextHopsEntry .1.3.6.1.4.1.562.36.2.1.114.4.12.658.1 |
mscAtmIfVpcMnrpNextHopsValueThis variable represents both the value and the index for the
mscAtmIfVpcMnrpNextHopsTable.rw Link .1.3.6.1.4.1.562.36.2.1.114.4.12.658.1.1 |
mscAtmIfVpcMnrpNextHopsRowStatusThis variable is used to control the addition and deletion
of individual values of the mscAtmIfVpcMnrpNextHopsTable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.4.12.658.1.2 |
mscAtmIfVccNrp OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.114.5.4 |
mscAtmIfVccNrpRowStatusTableThis entry controls the addition and deletion of
mscAtmIfVccNrp components. SEQUENCE OF MscAtmIfVccNrpRowStatusEntry .1.3.6.1.4.1.562.36.2.1.114.5.4.1 |
mscAtmIfVccNrpRowStatusEntryA single entry in the table represents a single
mscAtmIfVccNrp component. MscAtmIfVccNrpRowStatusEntry .1.3.6.1.4.1.562.36.2.1.114.5.4.1.1 |
mscAtmIfVccNrpRowStatusThis variable is used as the basis for SNMP naming of
mscAtmIfVccNrp components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.5.4.1.1.1 |
mscAtmIfVccNrpComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.5.4.1.1.2 |
mscAtmIfVccNrpStorageTypeThis variable represents the storage type value for the
mscAtmIfVccNrp tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.5.4.1.1.4 |
mscAtmIfVccNrpIndexThis variable represents the index for the mscAtmIfVccNrp tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.114.5.4.1.1.10 |
mscAtmIfVccNrpProvTableThis group contains the provisionable attributes for the Nrp
component. SEQUENCE OF MscAtmIfVccNrpProvEntry .1.3.6.1.4.1.562.36.2.1.114.5.4.100 |
mscAtmIfVccNrpProvEntryAn entry in the mscAtmIfVccNrpProvTable. MscAtmIfVccNrpProvEntry .1.3.6.1.4.1.562.36.2.1.114.5.4.100.1 |
mscAtmIfVccNrpNextHopThis attribute specifies the Nrp component with which this Nrp is
associated. A sample value is AtmIf/31 Vcc/0.32 Nrp.rw Link .1.3.6.1.4.1.562.36.2.1.114.5.4.100.1.10 |
mscAtmIfVccNrpConnectionPointTypeThis attribute specifies the connection point type desired for a Nrp
component. The actual connection point type value is visible in the
parent component's connectionPointType attribute.
The desired connection point type can be specified directly as a
segmentEndPoint or connectingPoint. If autoConfigure is
specified, the switch will select the connection point type based on
the type attribute of the associated AtmIf, choosing
segmentEndPoint for a UNI-type ATM interface and
connectingPoint for a PPI-type ATM interface.
It is obsoleted. The value is mapped into oamSegmentBoundary
attribute. segmentEndPoint is mapped into yes. connectingPoint is
mapped into no. autoConfigure is mapped into sameAsInterface.rwobsolete Enumeration .1.3.6.1.4.1.562.36.2.1.114.5.4.100.1.20 |
mscAtmIfVccNrpOamSegmentBoundaryThis attribute specifies the OAM segment boundary desired for a
Nrp component. It affects the connection point type value visible in
the parent component's connectionPointType attribute.
The desired OAM segment boundary can be specified directly as
yes, no or sameAsInterface. If sameAsInterface is specified, the
OAM segment boundary is same as the oamSegmentBoundary
attribute of the associated AtmIf and the switch will set the
connectionPointType, choosing segmentEndPoint for a segment-
boundary ATM interface and connectingPoint for a non-segment-
boundary ATM interface.rw Enumeration .1.3.6.1.4.1.562.36.2.1.114.5.4.100.1.30 |
mscAtmIfVccNrpTxAal5PartialPacketDiscardThis attribute is obsolete in P4.2 and has been migrated under Vcd
(Vpd) component.
This attribute specifies whether the AAL5 Partial Packet Discard
(PPD) feature has been enabled or disabled on the Nrp in the
transmit direction. This feature allows the NRP to discard the
remainder of a cell-forwarded AAL5 frame if a cell of this frame
has been discarded due to congestion. This increases the 'goodput'
of the link, since cells which are only going to be discarded by the
AAL5 reassembly are not transmitted.
When this attribute is set to enabled, the PPD feature is applied in
the transmit direction. It should only be enabled for connections
whose end points are performing AAL5 segmentation and
reassembly. When this attribute is set to disabled, the PPD feature is
not applied to traffic for this connection in the transmit direction.
Note that specifying enabled for a non-AAL5 connection will cause
all traffic to be discarded once congestion is encountered.rwobsolete Enumeration .1.3.6.1.4.1.562.36.2.1.114.5.4.100.1.31 |
mscAtmIfVccNrpRxAal5PartialPacketDiscardThis attribute is obsolete in P4.2 and has been migrated under Vcd
(Vpd) component.
This attribute specifies whether the AAL5 Partial Packet Discard
(PPD) feature has been enabled or disabled on the Nrp in the
receive direction. This feature allows the NRP to discard the
remainder of a cell-forwarded AAL5 frame if a cell of this frame
has been discarded due to congestion or usage parameter control
(UPC). This increases the 'goodput' of the link, since cells which
are only going to be discarded by the AAL5 reassembly are not
transmitted.
When this attribute is set to enabled, the PPD feature is applied in
the receive direction. It should only be enabled for connections
whose end points are performing AAL5 segmentation and
reassembly. When this attribute is set to disabled, the PPD feature is
not applied to traffic for this connection in the receive direction.
When this attribute is set to sameAsTx, the PPD feature for traffic
in the receive direction will be configured the same way as it is in
the transmit direction.
Note that specifying enabled for a non-AAL5 connection will cause
all traffic to be discarded once congestion is encountered.rwobsolete Enumeration .1.3.6.1.4.1.562.36.2.1.114.5.4.100.1.32 |
mscAtmIfVccNrpBandwidthElasticThis attribute is only of importance for connections which are
carried on a link with a variable bandwidth. For example, the
bandwidth may be reduced in the event that one or more physical
links in the IMA group fail, such that the originally requested
bandwidth cannot be maintained. This attribute shows whether the
application running on this connection can continue to operate if the
bandwidth is reduced. If the bandwidth is reduced, the amount by
which it is reduced will be displayed in the bandwidthReduction
attribute.
A value of yes, indicates that this connection is elastic, and the
bandwidth may be reduced but the connection will not be released.
Currently, this attribute should only be set to yes for situations
where this Nrp is functioning as a loopback on one side of an IMA
link. There are no other situations where this setting is valid.
A value of no indicates that the bandwidth for this connection will
not be reduced in the event of link bandwidth reduction. However,
this connection may be released based on its holdingPriority.rw Enumeration .1.3.6.1.4.1.562.36.2.1.114.5.4.100.1.33 |
mscAtmIfVccNrpOverrideHoldingPriorityThis attribute specifies the holding priority of this connection.
Holding priority is used when there is an IMA group where some
physical links have failed. Holding priority determines the order in
which connections are released. 4 is the lowest holding priority and
is released first. 0 is a higher priority and is released last. The value
specified in this attribute will override whatever holdingPriority that
has been provisioned at the Vcd (or Vpd). If the value is left at the
default of noOverride, the holdingPriority provisioned at the Vcd
(or Vpd) will be used.rw Enumeration .1.3.6.1.4.1.562.36.2.1.114.5.4.100.1.34 |
mscAtmIfVccMnrp OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.114.5.13 |
mscAtmIfVccMnrpRowStatusTableThis entry controls the addition and deletion of
mscAtmIfVccMnrp components. SEQUENCE OF MscAtmIfVccMnrpRowStatusEntry .1.3.6.1.4.1.562.36.2.1.114.5.13.1 |
mscAtmIfVccMnrpRowStatusEntryA single entry in the table represents a single
mscAtmIfVccMnrp component. MscAtmIfVccMnrpRowStatusEntry .1.3.6.1.4.1.562.36.2.1.114.5.13.1.1 |
mscAtmIfVccMnrpRowStatusThis variable is used as the basis for SNMP naming of
mscAtmIfVccMnrp components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.5.13.1.1.1 |
mscAtmIfVccMnrpComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.5.13.1.1.2 |
mscAtmIfVccMnrpStorageTypeThis variable represents the storage type value for the
mscAtmIfVccMnrp tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.5.13.1.1.4 |
mscAtmIfVccMnrpIndexThis variable represents the index for the mscAtmIfVccMnrp tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.114.5.13.1.1.10 |
mscAtmIfVccMnrpProvTableThis group contains the provisionable attributes for the Mnrp
component. SEQUENCE OF MscAtmIfVccMnrpProvEntry .1.3.6.1.4.1.562.36.2.1.114.5.13.101 |
mscAtmIfVccMnrpProvEntryAn entry in the mscAtmIfVccMnrpProvTable. MscAtmIfVccMnrpProvEntry .1.3.6.1.4.1.562.36.2.1.114.5.13.101.1 |
mscAtmIfVccMnrpOamSegmentBoundaryThis attribute specifies the OAM segment boundary desired for a
Mnrp component. It affects the connection point type value visible
in the parent component's connectionPointType attribute.
The desired OAM segment boundary can be specified directly as
yes, no or sameAsInterface. If sameAsInterface is specified, the
OAM segment boundary is same as the oamSegmentBoundary
attribute of the associated AtmIf and the switch will set the
connectionPointType, choosing segmentEndPoint for a segment-
boundary ATM interface and connectingPoint for a non-segment-
boundary ATM interface.rw Enumeration .1.3.6.1.4.1.562.36.2.1.114.5.13.101.1.30 |
mscAtmIfVccMnrpBandwidthElasticThis attribute is only of importance for connections which are
carried on a link with a variable bandwidth. For example, the
bandwidth may be reduced in the event that one or more physical
links in the IMA group fail, such that the originally requested
bandwidth cannot be maintained. This attribute shows whether the
application running on this connection can continue to operate if the
bandwidth is reduced. If the bandwidth is reduced, the amount by
which it is reduced will be displayed in the bandwidthReduction
attribute.
A value of yes, indicates that this connection is elastic, and the
bandwidth may be reduced but the connection will not be released.
Currently, this attribute should only be set to yes for situations
where this Mnrp is functioning as a loopback on one side of an IMA
link. There are no other situations where this setting is valid.
A value of no indicates that the bandwidth for this connection will
not be reduced in the event of link bandwidth reduction. However,
this connection may be released based on its holdingPriority.rw Enumeration .1.3.6.1.4.1.562.36.2.1.114.5.13.101.1.33 |
mscAtmIfVccMnrpOverrideHoldingPriorityThis attribute specifies the holding priority of this connection.
Holding priority is used when there is an IMA group where some
physical links have failed. Holding priority determines the order in
which connections are released. 4 is the lowest holding priority and
is released first. 0 is a higher priority and is released last. The value
specified in this attribute will override whatever holdingPriority that
has been provisioned at the Vcd (or Vpd). If the value is left at the
default of noOverride, the holdingPriority provisioned at the Vcd
(or Vpd) will be used.rw Enumeration .1.3.6.1.4.1.562.36.2.1.114.5.13.101.1.34 |
mscAtmIfVccMnrpNextHopsTableThis attribute specifies the list of Nrp components with which this
Mnrp is associated. A sample value is AtmIf/31 Vcc/0.32 Nrp. This
attribute must be provisioned with at least one Nrp component
under a compatible connection type. SEQUENCE OF MscAtmIfVccMnrpNextHopsEntry .1.3.6.1.4.1.562.36.2.1.114.5.13.658 |
mscAtmIfVccMnrpNextHopsEntryAn entry in the mscAtmIfVccMnrpNextHopsTable. MscAtmIfVccMnrpNextHopsEntry .1.3.6.1.4.1.562.36.2.1.114.5.13.658.1 |
mscAtmIfVccMnrpNextHopsValueThis variable represents both the value and the index for the
mscAtmIfVccMnrpNextHopsTable.rw Link .1.3.6.1.4.1.562.36.2.1.114.5.13.658.1.1 |
mscAtmIfVccMnrpNextHopsRowStatusThis variable is used to control the addition and deletion
of individual values of the mscAtmIfVccMnrpNextHopsTable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.5.13.658.1.2 |
mscAtmIfVptVccNrp OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.114.9.20.4 |
mscAtmIfVptVccNrpRowStatusTableThis entry controls the addition and deletion of
mscAtmIfVptVccNrp components. SEQUENCE OF MscAtmIfVptVccNrpRowStatusEntry .1.3.6.1.4.1.562.36.2.1.114.9.20.4.1 |
mscAtmIfVptVccNrpRowStatusEntryA single entry in the table represents a single
mscAtmIfVptVccNrp component. MscAtmIfVptVccNrpRowStatusEntry .1.3.6.1.4.1.562.36.2.1.114.9.20.4.1.1 |
mscAtmIfVptVccNrpRowStatusThis variable is used as the basis for SNMP naming of
mscAtmIfVptVccNrp components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.9.20.4.1.1.1 |
mscAtmIfVptVccNrpComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.9.20.4.1.1.2 |
mscAtmIfVptVccNrpStorageTypeThis variable represents the storage type value for the
mscAtmIfVptVccNrp tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.9.20.4.1.1.4 |
mscAtmIfVptVccNrpIndexThis variable represents the index for the mscAtmIfVptVccNrp tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.114.9.20.4.1.1.10 |
mscAtmIfVptVccNrpProvTableThis group contains the provisionable attributes for the Nrp
component. SEQUENCE OF MscAtmIfVptVccNrpProvEntry .1.3.6.1.4.1.562.36.2.1.114.9.20.4.100 |
mscAtmIfVptVccNrpProvEntryAn entry in the mscAtmIfVptVccNrpProvTable. MscAtmIfVptVccNrpProvEntry .1.3.6.1.4.1.562.36.2.1.114.9.20.4.100.1 |
mscAtmIfVptVccNrpNextHopThis attribute specifies the Nrp component with which this Nrp is
associated. A sample value is AtmIf/31 Vcc/0.32 Nrp.rw Link .1.3.6.1.4.1.562.36.2.1.114.9.20.4.100.1.10 |
mscAtmIfVptVccNrpConnectionPointTypeThis attribute specifies the connection point type desired for a Nrp
component. The actual connection point type value is visible in the
parent component's connectionPointType attribute.
The desired connection point type can be specified directly as a
segmentEndPoint or connectingPoint. If autoConfigure is
specified, the switch will select the connection point type based on
the type attribute of the associated AtmIf, choosing
segmentEndPoint for a UNI-type ATM interface and
connectingPoint for a PPI-type ATM interface.
It is obsoleted. The value is mapped into oamSegmentBoundary
attribute. segmentEndPoint is mapped into yes. connectingPoint is
mapped into no. autoConfigure is mapped into sameAsInterface.rwobsolete Enumeration .1.3.6.1.4.1.562.36.2.1.114.9.20.4.100.1.20 |
mscAtmIfVptVccNrpOamSegmentBoundaryThis attribute specifies the OAM segment boundary desired for a
Nrp component. It affects the connection point type value visible in
the parent component's connectionPointType attribute.
The desired OAM segment boundary can be specified directly as
yes, no or sameAsInterface. If sameAsInterface is specified, the
OAM segment boundary is same as the oamSegmentBoundary
attribute of the associated AtmIf and the switch will set the
connectionPointType, choosing segmentEndPoint for a segment-
boundary ATM interface and connectingPoint for a non-segment-
boundary ATM interface.rw Enumeration .1.3.6.1.4.1.562.36.2.1.114.9.20.4.100.1.30 |
mscAtmIfVptVccNrpTxAal5PartialPacketDiscardThis attribute is obsolete in P4.2 and has been migrated under Vcd
(Vpd) component.
This attribute specifies whether the AAL5 Partial Packet Discard
(PPD) feature has been enabled or disabled on the Nrp in the
transmit direction. This feature allows the NRP to discard the
remainder of a cell-forwarded AAL5 frame if a cell of this frame
has been discarded due to congestion. This increases the 'goodput'
of the link, since cells which are only going to be discarded by the
AAL5 reassembly are not transmitted.
When this attribute is set to enabled, the PPD feature is applied in
the transmit direction. It should only be enabled for connections
whose end points are performing AAL5 segmentation and
reassembly. When this attribute is set to disabled, the PPD feature is
not applied to traffic for this connection in the transmit direction.
Note that specifying enabled for a non-AAL5 connection will cause
all traffic to be discarded once congestion is encountered.rwobsolete Enumeration .1.3.6.1.4.1.562.36.2.1.114.9.20.4.100.1.31 |
mscAtmIfVptVccNrpRxAal5PartialPacketDiscardThis attribute is obsolete in P4.2 and has been migrated under Vcd
(Vpd) component.
This attribute specifies whether the AAL5 Partial Packet Discard
(PPD) feature has been enabled or disabled on the Nrp in the
receive direction. This feature allows the NRP to discard the
remainder of a cell-forwarded AAL5 frame if a cell of this frame
has been discarded due to congestion or usage parameter control
(UPC). This increases the 'goodput' of the link, since cells which
are only going to be discarded by the AAL5 reassembly are not
transmitted.
When this attribute is set to enabled, the PPD feature is applied in
the receive direction. It should only be enabled for connections
whose end points are performing AAL5 segmentation and
reassembly. When this attribute is set to disabled, the PPD feature is
not applied to traffic for this connection in the receive direction.
When this attribute is set to sameAsTx, the PPD feature for traffic
in the receive direction will be configured the same way as it is in
the transmit direction.
Note that specifying enabled for a non-AAL5 connection will cause
all traffic to be discarded once congestion is encountered.rwobsolete Enumeration .1.3.6.1.4.1.562.36.2.1.114.9.20.4.100.1.32 |
mscAtmIfVptVccNrpBandwidthElasticThis attribute is only of importance for connections which are
carried on a link with a variable bandwidth. For example, the
bandwidth may be reduced in the event that one or more physical
links in the IMA group fail, such that the originally requested
bandwidth cannot be maintained. This attribute shows whether the
application running on this connection can continue to operate if the
bandwidth is reduced. If the bandwidth is reduced, the amount by
which it is reduced will be displayed in the bandwidthReduction
attribute.
A value of yes, indicates that this connection is elastic, and the
bandwidth may be reduced but the connection will not be released.
Currently, this attribute should only be set to yes for situations
where this Nrp is functioning as a loopback on one side of an IMA
link. There are no other situations where this setting is valid.
A value of no indicates that the bandwidth for this connection will
not be reduced in the event of link bandwidth reduction. However,
this connection may be released based on its holdingPriority.rw Enumeration .1.3.6.1.4.1.562.36.2.1.114.9.20.4.100.1.33 |
mscAtmIfVptVccNrpOverrideHoldingPriorityThis attribute specifies the holding priority of this connection.
Holding priority is used when there is an IMA group where some
physical links have failed. Holding priority determines the order in
which connections are released. 4 is the lowest holding priority and
is released first. 0 is a higher priority and is released last. The value
specified in this attribute will override whatever holdingPriority that
has been provisioned at the Vcd (or Vpd). If the value is left at the
default of noOverride, the holdingPriority provisioned at the Vcd
(or Vpd) will be used.rw Enumeration .1.3.6.1.4.1.562.36.2.1.114.9.20.4.100.1.34 |
mscAtmIfVptVccMnrp OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.1.114.9.20.13 |
mscAtmIfVptVccMnrpRowStatusTableThis entry controls the addition and deletion of
mscAtmIfVptVccMnrp components. SEQUENCE OF MscAtmIfVptVccMnrpRowStatusEntry .1.3.6.1.4.1.562.36.2.1.114.9.20.13.1 |
mscAtmIfVptVccMnrpRowStatusEntryA single entry in the table represents a single
mscAtmIfVptVccMnrp component. MscAtmIfVptVccMnrpRowStatusEntry .1.3.6.1.4.1.562.36.2.1.114.9.20.13.1.1 |
mscAtmIfVptVccMnrpRowStatusThis variable is used as the basis for SNMP naming of
mscAtmIfVptVccMnrp components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.9.20.13.1.1.1 |
mscAtmIfVptVccMnrpComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.9.20.13.1.1.2 |
mscAtmIfVptVccMnrpStorageTypeThis variable represents the storage type value for the
mscAtmIfVptVccMnrp tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.9.20.13.1.1.4 |
mscAtmIfVptVccMnrpIndexThis variable represents the index for the mscAtmIfVptVccMnrp tables. NonReplicated .1.3.6.1.4.1.562.36.2.1.114.9.20.13.1.1.10 |
mscAtmIfVptVccMnrpProvTableThis group contains the provisionable attributes for the Mnrp
component. SEQUENCE OF MscAtmIfVptVccMnrpProvEntry .1.3.6.1.4.1.562.36.2.1.114.9.20.13.101 |
mscAtmIfVptVccMnrpProvEntryAn entry in the mscAtmIfVptVccMnrpProvTable. MscAtmIfVptVccMnrpProvEntry .1.3.6.1.4.1.562.36.2.1.114.9.20.13.101.1 |
mscAtmIfVptVccMnrpOamSegmentBoundaryThis attribute specifies the OAM segment boundary desired for a
Mnrp component. It affects the connection point type value visible
in the parent component's connectionPointType attribute.
The desired OAM segment boundary can be specified directly as
yes, no or sameAsInterface. If sameAsInterface is specified, the
OAM segment boundary is same as the oamSegmentBoundary
attribute of the associated AtmIf and the switch will set the
connectionPointType, choosing segmentEndPoint for a segment-
boundary ATM interface and connectingPoint for a non-segment-
boundary ATM interface.rw Enumeration .1.3.6.1.4.1.562.36.2.1.114.9.20.13.101.1.30 |
mscAtmIfVptVccMnrpBandwidthElasticThis attribute is only of importance for connections which are
carried on a link with a variable bandwidth. For example, the
bandwidth may be reduced in the event that one or more physical
links in the IMA group fail, such that the originally requested
bandwidth cannot be maintained. This attribute shows whether the
application running on this connection can continue to operate if the
bandwidth is reduced. If the bandwidth is reduced, the amount by
which it is reduced will be displayed in the bandwidthReduction
attribute.
A value of yes, indicates that this connection is elastic, and the
bandwidth may be reduced but the connection will not be released.
Currently, this attribute should only be set to yes for situations
where this Mnrp is functioning as a loopback on one side of an IMA
link. There are no other situations where this setting is valid.
A value of no indicates that the bandwidth for this connection will
not be reduced in the event of link bandwidth reduction. However,
this connection may be released based on its holdingPriority.rw Enumeration .1.3.6.1.4.1.562.36.2.1.114.9.20.13.101.1.33 |
mscAtmIfVptVccMnrpOverrideHoldingPriorityThis attribute specifies the holding priority of this connection.
Holding priority is used when there is an IMA group where some
physical links have failed. Holding priority determines the order in
which connections are released. 4 is the lowest holding priority and
is released first. 0 is a higher priority and is released last. The value
specified in this attribute will override whatever holdingPriority that
has been provisioned at the Vcd (or Vpd). If the value is left at the
default of noOverride, the holdingPriority provisioned at the Vcd
(or Vpd) will be used.rw Enumeration .1.3.6.1.4.1.562.36.2.1.114.9.20.13.101.1.34 |
mscAtmIfVptVccMnrpNextHopsTableThis attribute specifies the list of Nrp components with which this
Mnrp is associated. A sample value is AtmIf/31 Vcc/0.32 Nrp. This
attribute must be provisioned with at least one Nrp component
under a compatible connection type. SEQUENCE OF MscAtmIfVptVccMnrpNextHopsEntry .1.3.6.1.4.1.562.36.2.1.114.9.20.13.658 |
mscAtmIfVptVccMnrpNextHopsEntryAn entry in the mscAtmIfVptVccMnrpNextHopsTable. MscAtmIfVptVccMnrpNextHopsEntry .1.3.6.1.4.1.562.36.2.1.114.9.20.13.658.1 |
mscAtmIfVptVccMnrpNextHopsValueThis variable represents both the value and the index for the
mscAtmIfVptVccMnrpNextHopsTable.rw Link .1.3.6.1.4.1.562.36.2.1.114.9.20.13.658.1.1 |
mscAtmIfVptVccMnrpNextHopsRowStatusThis variable is used to control the addition and deletion
of individual values of the mscAtmIfVptVccMnrpNextHopsTable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.36.2.1.114.9.20.13.658.1.2 |
atmBearerServiceMIB OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.64 |
IMPORTS Unknown .1.3.6.1.4.1.562.36.2.2.64 |
atmBearerServiceGroup OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.64.1 |
atmBearerServiceGroupCA OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.64.1.1 |
atmBearerServiceGroupCA02 OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.64.1.1.3 |
atmBearerServiceGroupCA02A OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.64.1.1.3.2 |
atmBearerServiceCapabilities OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.64.3 |
atmBearerServiceCapabilitiesCA OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.64.3.1 |
atmBearerServiceCapabilitiesCA02 OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.64.3.1.3 |
atmBearerServiceCapabilitiesCA02A OBJECT IDENTIFIER .1.3.6.1.4.1.562.36.2.2.64.3.1.3.2 |