Nortel-Magellan-Passport-VnetNisSigMIB
AI MIB Summary
Standard SNMP MIB module defining data structures for Nortel-Magellan-Passport-VnetNisSigMIB.
85
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
85 total| Object Name |
|---|
vnetNisSigMIB OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.112 |
IMPORTS Unknown .1.3.6.1.4.1.562.2.4.2.112 |
vnetNisSigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.112.1 |
vnetNisSigGroupBE OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.112.1.5 |
vnetNisSigGroupBE01 OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.112.1.5.2 |
vnetNisSigGroupBE01A OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.112.1.5.2.2 |
vnetNisSigCapabilities OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.112.3 |
vnetNisSigCapabilitiesBE OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.112.3.5 |
vnetNisSigCapabilitiesBE01 OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.112.3.5.2 |
vnetNisSigCapabilitiesBE01A OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.112.3.5.2.2 |
sigChanNis OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.115.8 |
sigChanNisRowStatusTableThis entry controls the addition and deletion of
sigChanNis components. SEQUENCE OF SigChanNisRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.115.8.1 |
sigChanNisRowStatusEntryA single entry in the table represents a single
sigChanNis component. SigChanNisRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.115.8.1.1 |
sigChanNisRowStatusThis variable is used as the basis for SNMP naming of
sigChanNis components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.115.8.1.1.1 |
sigChanNisComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.115.8.1.1.2 |
sigChanNisStorageTypeThis variable represents the storage type value for the
sigChanNis tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.115.8.1.1.4 |
sigChanNisIndexThis variable represents the index for the sigChanNis tables. NonReplicated .1.3.6.1.4.1.3764.1.1.30.115.8.1.1.10 |
sigChanNisFramer OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.115.8.2 |
sigChanNisFramerRowStatusTableThis entry controls the addition and deletion of
sigChanNisFramer components. SEQUENCE OF SigChanNisFramerRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.115.8.2.1 |
sigChanNisFramerRowStatusEntryA single entry in the table represents a single
sigChanNisFramer component. SigChanNisFramerRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.115.8.2.1.1 |
sigChanNisFramerRowStatusThis variable is used as the basis for SNMP naming of
sigChanNisFramer components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.115.8.2.1.1.1 |
sigChanNisFramerComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.115.8.2.1.1.2 |
sigChanNisFramerStorageTypeThis variable represents the storage type value for the
sigChanNisFramer tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.115.8.2.1.1.4 |
sigChanNisFramerIndexThis variable represents the index for the sigChanNisFramer tables. NonReplicated .1.3.6.1.4.1.3764.1.1.30.115.8.2.1.1.10 |
sigChanNisFramerProvTableThis group contains the base provisioning data for the Framer
component. Application or hardware interface specific provisioning
data is contained in other provisionable Framer groups. SEQUENCE OF SigChanNisFramerProvEntry .1.3.6.1.4.1.3764.1.1.30.115.8.2.10 |
sigChanNisFramerProvEntryAn entry in the sigChanNisFramerProvTable. SigChanNisFramerProvEntry .1.3.6.1.4.1.3764.1.1.30.115.8.2.10.1 |
sigChanNisFramerInterfaceNameThis attribute contains a hardware component name.
The attribute associates the application with a specific link. This
defines the module processor on which Framer's parent component
(as well as Framer itself) will run.rw Link .1.3.6.1.4.1.3764.1.1.30.115.8.2.10.1.1 |
sigChanNisFramerStateTableThis group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. SEQUENCE OF SigChanNisFramerStateEntry .1.3.6.1.4.1.3764.1.1.30.115.8.2.12 |
sigChanNisFramerStateEntryAn entry in the sigChanNisFramerStateTable. SigChanNisFramerStateEntry .1.3.6.1.4.1.3764.1.1.30.115.8.2.12.1 |
sigChanNisFramerAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.115.8.2.12.1.1 |
sigChanNisFramerOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.115.8.2.12.1.2 |
sigChanNisFramerUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.115.8.2.12.1.3 |
sigChanNisFramerStatsTableThis group contains the operational statistics data for a Framer
component. SEQUENCE OF SigChanNisFramerStatsEntry .1.3.6.1.4.1.3764.1.1.30.115.8.2.13 |
sigChanNisFramerStatsEntryAn entry in the sigChanNisFramerStatsTable. SigChanNisFramerStatsEntry .1.3.6.1.4.1.3764.1.1.30.115.8.2.13.1 |
sigChanNisFramerFrmToIfThis attribute counts the number of frames transmitted to the link
interface by Framer.
This count wraps to zero after reaching its maximum value.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.115.8.2.13.1.1 |
sigChanNisFramerFrmFromIfThis attribute counts the number of frames received from the link
interface by Framer.
This count wraps to zero after reaching its maximum value.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.115.8.2.13.1.2 |
sigChanNisFramerOctetFromIfThe number of bytes received from the link interface by Framer.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.115.8.2.13.1.3 |
sigChanNisFramerAbortsThis attribute counts the total number of aborts received.
This count wraps to zero after reaching its maximum value.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.115.8.2.13.1.4 |
sigChanNisFramerCrcErrorsThis attribute counts the total number of frames with CRC errors.
This count wraps to zero after reaching its maximum value.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.115.8.2.13.1.5 |
sigChanNisFramerLrcErrorsThis attribute counts the total number of frames with LRC errors.
This count wraps to zero after reaching its maximum value.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.115.8.2.13.1.6 |
sigChanNisFramerNonOctetErrorsThis attribute counts the total number of frames that were non octet
aligned.
This count wraps to zero after reaching its maximum value.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.115.8.2.13.1.7 |
sigChanNisFramerOverrunsThis attribute counts the total number of frames received from the
link for which overruns occurred.
This count wraps to zero after reaching its maximum value.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.115.8.2.13.1.8 |
sigChanNisFramerUnderrunsThis attribute counts the total number of frames transmitted to the
link for which underruns occurred.
This count wraps to zero after reaching its maximum value.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.115.8.2.13.1.9 |
sigChanNisFramerLargeFrmErrorsThis attribute counts the total number of frames received which
were too large (longer than 500 bytes).
This count wraps to zero after reaching its maximum value.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.115.8.2.13.1.10 |
sigChanNisL2TableThis group specifies the provisionable layer 2 attributes of the
Q.931 ITU-T protocol. SEQUENCE OF SigChanNisL2Entry .1.3.6.1.4.1.3764.1.1.30.115.8.11 |
sigChanNisL2EntryAn entry in the sigChanNisL2Table. SigChanNisL2Entry .1.3.6.1.4.1.3764.1.1.30.115.8.11.1 |
sigChanNisT23This attribute specifies the layer 2 enable request timer.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.115.8.11.1.1 |
sigChanNisT200This attribute specifies the maximum time between a layer 2 frame
and its acknowledgment.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.115.8.11.1.2 |
sigChanNisN200This attribute specifies the maximum number of re-transmissions of
a layer 2 frame.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.115.8.11.1.3 |
sigChanNisT203This attribute specifies the maximum time for which layer 2 frames
may be absent. Expiry triggers a check on whether the far end is
alive.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.115.8.11.1.4 |
sigChanNisCircuitSwitchedKThis attribute specifies the maximum number of sequentially
numbered I frames (that is, window size (k)) that may be
unacknowledged at any given time for a SAP supporting primary
rate (64kbit/sec) signalling.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.115.8.11.1.6 |
sigChanNisL3TableThis group represents the provisionable Layer 3 timer attributes of a
the Nis signalling protocol. SEQUENCE OF SigChanNisL3Entry .1.3.6.1.4.1.3764.1.1.30.115.8.12 |
sigChanNisL3EntryAn entry in the sigChanNisL3Table. SigChanNisL3Entry .1.3.6.1.4.1.3764.1.1.30.115.8.12.1 |
sigChanNisT309This attribute specifies the data link failure timer; used to ride out
temporary failures.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.115.8.12.1.3 |
sigChanNisT310This attribute specifies the call proceeding state timer.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.115.8.12.1.4 |
sigChanNisProvTableThis group defines the general options of the D-channel signalling
link. SEQUENCE OF SigChanNisProvEntry .1.3.6.1.4.1.3764.1.1.30.115.8.13 |
sigChanNisProvEntryAn entry in the sigChanNisProvTable. SigChanNisProvEntry .1.3.6.1.4.1.3764.1.1.30.115.8.13.1 |
sigChanNisSideThis attribute specifies whether the interface is the network or user
side of the connection. The parameter applies to both the layer 2
and layer 3 of the interface. If this attribute is set to network, then
the interface is master during channel negotiation. If this attribute is
set to user, then the interface is slave during channel negotiation.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.115.8.13.1.1 |
sigChanNisMaxNonCallConcurrentThis attribute specifies the maximum number of simultaneous active
non-call messages that are allowed.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.115.8.13.1.2 |
sigChanNisStateTableThis group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. SEQUENCE OF SigChanNisStateEntry .1.3.6.1.4.1.3764.1.1.30.115.8.14 |
sigChanNisStateEntryAn entry in the sigChanNisStateTable. SigChanNisStateEntry .1.3.6.1.4.1.3764.1.1.30.115.8.14.1 |
sigChanNisAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.115.8.14.1.1 |
sigChanNisOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.115.8.14.1.2 |
sigChanNisUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.115.8.14.1.3 |
sigChanNisStatsTableThis group provides the operational components for the NisSig
component. SEQUENCE OF SigChanNisStatsEntry .1.3.6.1.4.1.3764.1.1.30.115.8.15 |
sigChanNisStatsEntryAn entry in the sigChanNisStatsTable. SigChanNisStatsEntry .1.3.6.1.4.1.3764.1.1.30.115.8.15.1 |
sigChanNisTotalCallsToIfThis attribute counts the total number of calls that have been made
to the interface. The value wraps when it reaches its maximum.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.115.8.15.1.2 |
sigChanNisTotalCallsFromIfThis attribute counts the total number of calls from the interface.
The value wraps when it reaches its maximum.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.115.8.15.1.3 |
sigChanNisNonCallAssocSessionsToIfThis attribute counts the total number of non-call associated
sessions to the interface. The value wraps when it reaches its
maximum.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.115.8.15.1.4 |
sigChanNisNonCallAssocSessionsFromIfThis attribute counts the total number of non-call associated
sessions from the interface. The value wraps when it reaches its
maximum.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.115.8.15.1.5 |
sigChanNisOperTableThis group provides the operational attributes for the NisSig
protocol. SEQUENCE OF SigChanNisOperEntry .1.3.6.1.4.1.3764.1.1.30.115.8.16 |
sigChanNisOperEntryAn entry in the sigChanNisOperTable. SigChanNisOperEntry .1.3.6.1.4.1.3764.1.1.30.115.8.16.1 |
sigChanNisActiveChannelsThis attribute indicates the number of currently active channels.
This includes data and voice channels.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.115.8.16.1.1 |
sigChanNisActiveVoiceChannelsThis attribute indicates the number of channels that are currently
carrying voice.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.115.8.16.1.2 |
sigChanNisActiveDataChannelsThis attribute indicates the number of channels that are currently
carrying data. This does not include modem data.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.115.8.16.1.3 |
sigChanNisPeakActiveChannelsThis attribute indicates the maximum number of channels that have
been active on this signalling channel during the last polling period.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.115.8.16.1.4 |
sigChanNisPeakActiveVoiceChannelsThis attribute indicates the maximum number of voice channels that
have been active on this signalling channel during the last polling
period.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.115.8.16.1.5 |
sigChanNisPeakActiveDataChannelsThis attribute indicates the maximum number of data channels that
have been active on this signalling channel during the last polling
period.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.115.8.16.1.6 |
sigChanNisDChanStatusThis attribute indicates the state of the D-channel.
outOfService means that there is no layer 2 or layer 3 connectivity
to the PBX.
establishing means that the signalling channel is attempting to stage
the layer 2.
established means that the layer 2 is enabled. If the signalling
channel stays in the established state, then it is waiting for a restart
from the PBX.
enabling means that the resources for processing calls are being
initialized. If the signalling channel stays in the enabling state then
it is waiting for a restart acknowledgement from the PBX.
inService means that the resources for processing calls are
available.
restarting means that the resources for call processing are being
rei-initialized.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.115.8.16.1.7 |
sigChanNisToolsTableThis contains a series of operational attributes which turn on and off
several kinds of tracing. SEQUENCE OF SigChanNisToolsEntry .1.3.6.1.4.1.3764.1.1.30.115.8.17 |
sigChanNisToolsEntryAn entry in the sigChanNisToolsTable. SigChanNisToolsEntry .1.3.6.1.4.1.3764.1.1.30.115.8.17.1 |
sigChanNisTracingThis attribute defines which types of tracing are active for this
signalling channel. The tracing messages are sent to the debug
stream. To see the messages the agentQueue attribute in Col/debug
must be greater than 0 and a Telnet NMIS session must list the
debug stream in in its data streams (ex. set nmis telnet session/1
dataStreams debug). Different types of tracing can be enabled
simultaneously.
Note that tracing consumes additional CPU resources and will slow
down call processing on a heavily loaded card. If there is message
block exhaustion tracing will be suspended for a period and then
automatically reenabled. An alarm is generated on tracing
suspension and resumption. This mechanism protects the function
processor against excessive numbers of tracing messages.
Types of tracing include:
protocolErrors - get details of any protocol errors which are
occuring. Protocol errors are also reported in summary form as
alarms.
q931Summary - Summary of the Q.931 messages on the signalling
link, including certain call details (calling number, called number,
release codes).
q931Hex - Q.931 messages displayed in hex format. Useful to
determine protocol compliance in case of errors reported on local or
remote ends.
q931Symbolic - Q.931 messages parsed to give maximum detail.
Useful for understanding content of messages flowing on the link.
portHex - Messages in hex format being sent and received on the
link.
Description of bits:
protocolErrors(0)
q931Summary(1)
q931Hex(2)
q931Symbolic(3)
portHex(4)rw OCTET STRING .1.3.6.1.4.1.3764.1.1.30.115.8.17.1.1 |
sigChanNisNisSpecificProvTableThis group provides NIS protocol specific provisioning. SEQUENCE OF SigChanNisNisSpecificProvEntry .1.3.6.1.4.1.3764.1.1.30.115.8.18 |
sigChanNisNisSpecificProvEntryAn entry in the sigChanNisNisSpecificProvTable. SigChanNisNisSpecificProvEntry .1.3.6.1.4.1.3764.1.1.30.115.8.18.1 |
sigChanNisChanMaintenanceHandlingThis attribute specifies how channel maintenance events should be
handled upon startup. Channel maintenance events include locking
and unlocking a channel or channel registration. The decision is
either to send individual channel RESTART messages, SERVICE
messages, or nothing. Note that channel registration only occurs
after the global interface restart at startup.
Setting this attribute to enable SERVICE messages ensures that
SERVICE messages occur at startup and whenever a channel goes
into or out of service. If this attribute is not set to enable SERVICE
messaging, a RESTART is always sent on unlocking a channel.
globalOnStartup provides the minimum required functionality at
startup, without any individual channel confirmation. Note that
when this is set, channel RESTART is still used for channel unlock.
globalOnStartup applies to SigChan startup only.
serviceMessage enables sending and receiving SERVICE messages.
If this attribute is set to serviceMessage, SERVICE messages are
used for channel maintenance on channel lock, channel unlock, and
startup.
restartMessage specifies that individual channel RESTARTs when
the SigChan starts up. If this attribute is set to restartMessage, a
RESTART message is used to send at startup and channel unlock.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.115.8.18.1.1 |