Nortel-Magellan-Passport-VnetEuroIsdnMIB
AI MIB Summary
Standard SNMP MIB module defining data structures for Nortel-Magellan-Passport-VnetEuroIsdnMIB.
89
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
89 total| Object Name |
|---|
vnetEuroIsdnMIB OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.138 |
IMPORTS Unknown .1.3.6.1.4.1.562.2.4.2.138 |
vnetEuroIsdnGroup OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.138.1 |
vnetEuroIsdnGroupBE OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.138.1.5 |
vnetEuroIsdnGroupBE01 OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.138.1.5.2 |
vnetEuroIsdnGroupBE01A OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.138.1.5.2.2 |
vnetEuroIsdnCapabilities OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.138.3 |
vnetEuroIsdnCapabilitiesBE OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.138.3.5 |
vnetEuroIsdnCapabilitiesBE01 OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.138.3.5.2 |
vnetEuroIsdnCapabilitiesBE01A OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.138.3.5.2.2 |
sigChanEIsdn OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.115.14 |
sigChanEIsdnRowStatusTableThis entry controls the addition and deletion of
sigChanEIsdn components. SEQUENCE OF SigChanEIsdnRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.115.14.1 |
sigChanEIsdnRowStatusEntryA single entry in the table represents a single
sigChanEIsdn component. SigChanEIsdnRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.115.14.1.1 |
sigChanEIsdnRowStatusThis variable is used as the basis for SNMP naming of
sigChanEIsdn components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.115.14.1.1.1 |
sigChanEIsdnComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.115.14.1.1.2 |
sigChanEIsdnStorageTypeThis variable represents the storage type value for the
sigChanEIsdn tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.115.14.1.1.4 |
sigChanEIsdnIndexThis variable represents the index for the sigChanEIsdn tables. NonReplicated .1.3.6.1.4.1.3764.1.1.30.115.14.1.1.10 |
sigChanEIsdnFramer OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.115.14.2 |
sigChanEIsdnFramerRowStatusTableThis entry controls the addition and deletion of
sigChanEIsdnFramer components. SEQUENCE OF SigChanEIsdnFramerRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.115.14.2.1 |
sigChanEIsdnFramerRowStatusEntryA single entry in the table represents a single
sigChanEIsdnFramer component. SigChanEIsdnFramerRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.115.14.2.1.1 |
sigChanEIsdnFramerRowStatusThis variable is used as the basis for SNMP naming of
sigChanEIsdnFramer components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.115.14.2.1.1.1 |
sigChanEIsdnFramerComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.115.14.2.1.1.2 |
sigChanEIsdnFramerStorageTypeThis variable represents the storage type value for the
sigChanEIsdnFramer tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.115.14.2.1.1.4 |
sigChanEIsdnFramerIndexThis variable represents the index for the sigChanEIsdnFramer tables. NonReplicated .1.3.6.1.4.1.3764.1.1.30.115.14.2.1.1.10 |
sigChanEIsdnFramerProvTableThis group contains the base provisioning data for the Framer
component. Application or hardware interface specific provisioning
data is contained in other provisionable Framer groups. SEQUENCE OF SigChanEIsdnFramerProvEntry .1.3.6.1.4.1.3764.1.1.30.115.14.2.10 |
sigChanEIsdnFramerProvEntryAn entry in the sigChanEIsdnFramerProvTable. SigChanEIsdnFramerProvEntry .1.3.6.1.4.1.3764.1.1.30.115.14.2.10.1 |
sigChanEIsdnFramerInterfaceNameThis attribute contains a hardware component name.
The attribute associates the application with a specific link. This
defines the module processor on which Framer's parent component
(as well as Framer itself) will run.rw Link .1.3.6.1.4.1.3764.1.1.30.115.14.2.10.1.1 |
sigChanEIsdnFramerStateTableThis group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. SEQUENCE OF SigChanEIsdnFramerStateEntry .1.3.6.1.4.1.3764.1.1.30.115.14.2.12 |
sigChanEIsdnFramerStateEntryAn entry in the sigChanEIsdnFramerStateTable. SigChanEIsdnFramerStateEntry .1.3.6.1.4.1.3764.1.1.30.115.14.2.12.1 |
sigChanEIsdnFramerAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.115.14.2.12.1.1 |
sigChanEIsdnFramerOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.115.14.2.12.1.2 |
sigChanEIsdnFramerUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.115.14.2.12.1.3 |
sigChanEIsdnFramerStatsTableThis group contains the operational statistics data for a Framer
component. SEQUENCE OF SigChanEIsdnFramerStatsEntry .1.3.6.1.4.1.3764.1.1.30.115.14.2.13 |
sigChanEIsdnFramerStatsEntryAn entry in the sigChanEIsdnFramerStatsTable. SigChanEIsdnFramerStatsEntry .1.3.6.1.4.1.3764.1.1.30.115.14.2.13.1 |
sigChanEIsdnFramerFrmToIfThis attribute counts the number of frames transmitted to the link
interface by the Framer.
This count wraps to zero after exceeding its maximum value.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.115.14.2.13.1.1 |
sigChanEIsdnFramerFrmFromIfThis attribute counts the number of frames received from the link
interface by the Framer.
This count wraps to zero after exceeding its maximum value.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.115.14.2.13.1.2 |
sigChanEIsdnFramerOctetFromIfThis attribute counts the number of bytes received from the link
interface by the Framer.
This count wraps to zero after exceeding its maximum value.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.115.14.2.13.1.3 |
sigChanEIsdnFramerAbortsThis attribute counts the total number of aborts received.
This count wraps to zero after exceeding its maximum value.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.115.14.2.13.1.4 |
sigChanEIsdnFramerCrcErrorsThis attribute counts the total number of frames with CRC errors.
This count wraps to zero after exceeding its maximum value.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.115.14.2.13.1.5 |
sigChanEIsdnFramerLrcErrorsThis attribute counts the total number of frames with LRC errors.
This count wraps to zero after exceeding its maximum value.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.115.14.2.13.1.6 |
sigChanEIsdnFramerNonOctetErrorsThis attribute counts the total number of frames that were non octet
aligned.
This count wraps to zero after exceeding its maximum value.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.115.14.2.13.1.7 |
sigChanEIsdnFramerOverrunsThis attribute counts the total number of frames received from the
link for which overruns occurred.
This count wraps to zero after exceeding its maximum value.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.115.14.2.13.1.8 |
sigChanEIsdnFramerUnderrunsThis attribute counts the total number of frames transmitted to the
link for which underruns occurred.
This count wraps to zero after exceeding its maximum value.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.115.14.2.13.1.9 |
sigChanEIsdnFramerLargeFrmErrorsThis attribute counts the total number of frames received which
were too large (longer than 500 bytes).
This count wraps to zero after exceeding its maximum value.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.115.14.2.13.1.10 |
sigChanEIsdnL2TableThis group specifies the provisionable layer 2 attributes of the Euro
ISDN (ETSI-T) protocol. SEQUENCE OF SigChanEIsdnL2Entry .1.3.6.1.4.1.3764.1.1.30.115.14.11 |
sigChanEIsdnL2EntryAn entry in the sigChanEIsdnL2Table. SigChanEIsdnL2Entry .1.3.6.1.4.1.3764.1.1.30.115.14.11.1 |
sigChanEIsdnT23This attribute specifies duration of the layer 2 enable request timer.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.115.14.11.1.1 |
sigChanEIsdnT200This attribute specifies the maximum elapsed time between a layer
2 frame and its acknowledgment.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.115.14.11.1.2 |
sigChanEIsdnN200This attribute specifies the maximum number of re-transmissions of
a layer 2 frame.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.115.14.11.1.3 |
sigChanEIsdnT203This attribute specifies the maximum time during which layer 2
frames may be absent. Expiry triggers a check on whether the far
end is alive.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.115.14.11.1.4 |
sigChanEIsdnCircuitSwitchedKThis attribute specifies the maximum number of sequentially
numbered I frames (that is, window size (k)) that may be
unacknowledged at any given time for a SAP supporting primary
rate (64kbit/sec) signalling.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.115.14.11.1.6 |
sigChanEIsdnL3TableThis group represents the provisionable Layer 3 timer attributes of a
the Euro ISDN (ETSI-T) protocol. SEQUENCE OF SigChanEIsdnL3Entry .1.3.6.1.4.1.3764.1.1.30.115.14.12 |
sigChanEIsdnL3EntryAn entry in the sigChanEIsdnL3Table. SigChanEIsdnL3Entry .1.3.6.1.4.1.3764.1.1.30.115.14.12.1 |
sigChanEIsdnT310This attribute specifies duration of the call proceeding state timer.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.115.14.12.1.4 |
sigChanEIsdnProvTableThis group defines the general options of the D-channel signalling
link. SEQUENCE OF SigChanEIsdnProvEntry .1.3.6.1.4.1.3764.1.1.30.115.14.13 |
sigChanEIsdnProvEntryAn entry in the sigChanEIsdnProvTable. SigChanEIsdnProvEntry .1.3.6.1.4.1.3764.1.1.30.115.14.13.1 |
sigChanEIsdnSideThis attribute specifies whether the interface is the network or user
side of the connection. The parameter applies to both the layer 2
and layer 3 of the interface. In addition, if this attribute is set to
network, then the interface is master during channel negotiation. If
this attribute is set to user, then the interface is slave during channel
negotiation.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.115.14.13.1.1 |
sigChanEIsdnMaxNonCallConcurrentThis attribute specifies the maximum number of simultaneous active
non call-associated sessions that are allowed. Reduction of the value
does not impact NCAS sessions already in progress.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.115.14.13.1.2 |
sigChanEIsdnOverlapSendingThis attribute specifies whether overlap sending to the PBX is
enabled.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.115.14.13.1.3 |
sigChanEIsdnOverlapReceivingThis attribute specifies whether overlap receiving from the PBX is
enabled.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.115.14.13.1.4 |
sigChanEIsdnStateTableThis group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. SEQUENCE OF SigChanEIsdnStateEntry .1.3.6.1.4.1.3764.1.1.30.115.14.14 |
sigChanEIsdnStateEntryAn entry in the sigChanEIsdnStateTable. SigChanEIsdnStateEntry .1.3.6.1.4.1.3764.1.1.30.115.14.14.1 |
sigChanEIsdnAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.115.14.14.1.1 |
sigChanEIsdnOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.115.14.14.1.2 |
sigChanEIsdnUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.115.14.14.1.3 |
sigChanEIsdnStatsTableThis group provides the statistical attributes for the SigChan/x
EuroIsdn component. SEQUENCE OF SigChanEIsdnStatsEntry .1.3.6.1.4.1.3764.1.1.30.115.14.15 |
sigChanEIsdnStatsEntryAn entry in the sigChanEIsdnStatsTable. SigChanEIsdnStatsEntry .1.3.6.1.4.1.3764.1.1.30.115.14.15.1 |
sigChanEIsdnTotalCallsToIfThis attribute counts the total number of calls that have been made
to the interface. The value wraps to zero when it exceeds its
maximum.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.115.14.15.1.2 |
sigChanEIsdnTotalCallsFromIfThis attribute counts the total number of calls that have been made
from the interface. The value wraps to zero when it exceeds its
maximum.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.115.14.15.1.3 |
sigChanEIsdnNonCallAssocSessionsToIfThis attribute counts the total number of non call-associated
sessions that have been made to the interface. The value wraps to
zero when it exceeds its maximum.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.115.14.15.1.4 |
sigChanEIsdnNonCallAssocSessionsFromIfThis attribute counts the total number of non call-associated
sessions that have been made from the interface. The value wraps to
zero when it exceeds its maximum.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.115.14.15.1.5 |
sigChanEIsdnOperTableThis group provides the operational attributes for the SigChan/x
EuroIsdn component. SEQUENCE OF SigChanEIsdnOperEntry .1.3.6.1.4.1.3764.1.1.30.115.14.16 |
sigChanEIsdnOperEntryAn entry in the sigChanEIsdnOperTable. SigChanEIsdnOperEntry .1.3.6.1.4.1.3764.1.1.30.115.14.16.1 |
sigChanEIsdnActiveChannelsThis attribute indicates the number of currently active channels.
This includes channels used by both, data and voice calls.ro Gauge32 .1.3.6.1.4.1.3764.1.1.30.115.14.16.1.1 |
sigChanEIsdnActiveVoiceChannelsThis attribute indicates the number of channels that are currently
used by voice calls. This includes modem calls.ro Gauge32 .1.3.6.1.4.1.3764.1.1.30.115.14.16.1.2 |
sigChanEIsdnActiveDataChannelsThis attribute indicates the number of channels that are currently
used by data calls. This does not include modem data.ro Gauge32 .1.3.6.1.4.1.3764.1.1.30.115.14.16.1.3 |
sigChanEIsdnPeakActiveChannelsThis attribute indicates the maximum value of the activeChannels
attribute during the last polling period.ro Gauge32 .1.3.6.1.4.1.3764.1.1.30.115.14.16.1.4 |
sigChanEIsdnPeakActiveVoiceChannelsThis attribute indicates the maximum value of the
activeVoiceChannels attribute during the last polling period.ro Gauge32 .1.3.6.1.4.1.3764.1.1.30.115.14.16.1.5 |
sigChanEIsdnPeakActiveDataChannelsThis attribute indicates the maximum value of the
activeDataChannels attribute during the last polling period.ro Gauge32 .1.3.6.1.4.1.3764.1.1.30.115.14.16.1.6 |
sigChanEIsdnDChanStatusThis attribute indicates the state of the D-channel.
outOfService means that there is no layer 2 or layer 3 connectivity
to the PBX.
establishing means that the signalling channel is attempting to stage
the layer 2.
established means that the layer 2 is enabled. If the signalling
channel stays in the established state, then it is waiting for a restart
from the PBX.
enabling means that the resources for processing calls are being
initialized. If the signalling channel stays in the enabling state then
it is waiting for a restart acknowledgment from the PBX.
inService means that the resources for processing calls are
available.
restarting means that the resources for call processing are being
initialized.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.115.14.16.1.7 |
sigChanEIsdnToolsTableThis contains a series of operational attributes which turn on and off
several kinds of tracing. SEQUENCE OF SigChanEIsdnToolsEntry .1.3.6.1.4.1.3764.1.1.30.115.14.17 |
sigChanEIsdnToolsEntryAn entry in the sigChanEIsdnToolsTable. SigChanEIsdnToolsEntry .1.3.6.1.4.1.3764.1.1.30.115.14.17.1 |
sigChanEIsdnTracingThis attribute defines which types of tracing are active on the
signalling channel. The tracing messages are sent to the debug
stream. To see the messages the agentQueueSize attribute of the
Lp/x Eng Ds/debug component must be greater than 0 and the
operator's NMIS session must have the debug stream included in its
data stream list (for example: set Nmis Telnet Session/1
dataStreams deb). Several types of tracing can be enabled
simultaneously.
Note that tracing consumes additional CPU resources and slows
down call processing on a heavily loaded card. If there is message
block exhaustion tracing is suspended for a period of time and then
automatically re-enabled. An alarm is generated on tracing
suspension and resumption. This mechanism protects the function
processor against excessive numbers of tracing messages.
Types of tracing include:
protocolErrors - get details of any protocol errors which are
occurring. Protocol errors are also reported in summary form as
alarms.
q931Summary - summary of the Q.931 messages on the signalling
link.
q931Hex - Q.931 messages displayed in hex format. Useful to
determine protocol compliance in case of errors reported on local or
remote ends.
q931Symbolic - Q.931 messages parsed to give maximum detail.
Useful for understanding content of messages flowing on the link.
portHex - Q.921 messages in hex format being sent and received on
the link.
Description of bits:
protocolErrors(0)
q931Summary(1)
q931Hex(2)
q931Symbolic(3)
portHex(4)rw OCTET STRING .1.3.6.1.4.1.3764.1.1.30.115.14.17.1.1 |
sigChanEIsdnOptTableThis group specifies the provisionable attributes specific to the Euro
ISDN (ETSI-T) protocol. SEQUENCE OF SigChanEIsdnOptEntry .1.3.6.1.4.1.3764.1.1.30.115.14.18 |
sigChanEIsdnOptEntryAn entry in the sigChanEIsdnOptTable. SigChanEIsdnOptEntry .1.3.6.1.4.1.3764.1.1.30.115.14.18.1 |
sigChanEIsdnVariantThis attribute specifies the specific variant of the Euro ISDN (ETSI-
T) protocol. Supported variants are:
etsiGeneric - provides generic ETSI-T protocol. Only proxy of the
NETWORK side of the protocol is implemented,
austria - provides ETSI-T protocol variant as per the Austrian
national specification. Only the USER side of the protocol is
implemented,
germany - provides ETSI-T protocol variant as per the German
national specification. Only the USER side of the protocol is
implemented.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.115.14.18.1.1 |
sigChanEIsdnConnectServiceTimerThis attribute specifies duration of the 'await connection'
supervisory timer which applies to non call-associated sessions
providing bearer-independent connection-oriented transport for
supplementary services. The timer is started at the ingress Passport
when a REGISTER message is received from the source PBX and
stopped when a virtual circuit with the egress Passport is
established. If the timer expires, the non call-associated session is
cleared.
The 'await connection' timer (attribute connectServiceTimer)
together with 'await response' timer (attribute
responseServiceTimer) provide equivalent of the T-ACTIVATE
timer described in the relevant supplementary service specifications.
A change of the timer value does not apply to timers already
running.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.115.14.18.1.2 |
sigChanEIsdnResponseServiceTimerThis attribute specifies duration of the 'await response' supervisory
timer which applies to non call-associated sessions providing
bearer-independent connection-oriented transport for supplementary
services. The timer is started at the ingress Passport when creation
of a virtual circuit with the egress Passport is confirmed and stopped
when the first message from the destination PBX is received. If the
timer expires, the non call-associated session is cleared.
The 'await connection' timer (attribute connectServiceTimer)
together with 'await response' timer (attribute
responseServiceTimer) provide equivalent of the T-ACTIVATE
timer described in the relevant supplementary service specifications.
A change of the timer value does not apply to timers already
running.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.115.14.18.1.3 |
sigChanEIsdnLifetimeServiceTimerThis attribute specifies duration of the service lifetime supervisory
timer which applies to non call-associated sessions providing
bearer-independent connection-oriented transport for supplementary
services. The timer limits the duration of a virtual call. It is started
at the ingress Passport at the moment the first response message
from the destination PBX has been received and stopped when the
non call-associated session is released. If the timer expires, the non
call-associated session is cleared.
This timer is equivalent to the T-CCBS6 timer described in the
relevant supplementary service specifications.
A change of the timer value does not apply to timers already
running.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.115.14.18.1.4 |