Nortel-Magellan-Passport-UtpDpnTrunksMIB
AI MIB Summary
Standard SNMP MIB module defining data structures for Nortel-Magellan-Passport-UtpDpnTrunksMIB.
90
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
90 total| Object Name |
|---|
utpDpnTrunksMIB OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.67 |
IMPORTS Unknown .1.3.6.1.4.1.562.2.4.2.67 |
utpDpnTrunksGroup OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.67.1 |
utpDpnTrunksGroupBE OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.67.1.5 |
utpDpnTrunksGroupBE00 OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.67.1.5.1 |
utpDpnTrunksGroupBE00A OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.67.1.5.1.2 |
utpDpnTrunksCapabilities OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.67.3 |
utpDpnTrunksCapabilitiesBE OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.67.3.5 |
utpDpnTrunksCapabilitiesBE00 OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.67.3.5.1 |
utpDpnTrunksCapabilitiesBE00A OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.67.3.5.1.2 |
dpnGateUtp OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.61.2 |
dpnGateUtpRowStatusTableThis entry controls the addition and deletion of
dpnGateUtp components. SEQUENCE OF DpnGateUtpRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.61.2.1 |
dpnGateUtpRowStatusEntryA single entry in the table represents a single
dpnGateUtp component. DpnGateUtpRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.61.2.1.1 |
dpnGateUtpRowStatusThis variable is used as the basis for SNMP naming of
dpnGateUtp components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.61.2.1.1.1 |
dpnGateUtpComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.61.2.1.1.2 |
dpnGateUtpStorageTypeThis variable represents the storage type value for the
dpnGateUtp tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.61.2.1.1.4 |
dpnGateUtpIndexThis variable represents the index for the dpnGateUtp tables. NonReplicated .1.3.6.1.4.1.3764.1.1.30.61.2.1.1.10 |
dpnGateUtpFramer OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.61.2.2 |
dpnGateUtpFramerRowStatusTableThis entry controls the addition and deletion of
dpnGateUtpFramer components. SEQUENCE OF DpnGateUtpFramerRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.61.2.2.1 |
dpnGateUtpFramerRowStatusEntryA single entry in the table represents a single
dpnGateUtpFramer component. DpnGateUtpFramerRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.61.2.2.1.1 |
dpnGateUtpFramerRowStatusThis variable is used as the basis for SNMP naming of
dpnGateUtpFramer components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.61.2.2.1.1.1 |
dpnGateUtpFramerComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.61.2.2.1.1.2 |
dpnGateUtpFramerStorageTypeThis variable represents the storage type value for the
dpnGateUtpFramer tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.61.2.2.1.1.4 |
dpnGateUtpFramerIndexThis variable represents the index for the dpnGateUtpFramer tables. NonReplicated .1.3.6.1.4.1.3764.1.1.30.61.2.2.1.1.10 |
dpnGateUtpFramerProvTableThis group contains the base provisioning data for the Framer
component. Application or hardware interface specific provisioning
data is contained in other provisionable Framer groups. SEQUENCE OF DpnGateUtpFramerProvEntry .1.3.6.1.4.1.3764.1.1.30.61.2.2.10 |
dpnGateUtpFramerProvEntryAn entry in the dpnGateUtpFramerProvTable. DpnGateUtpFramerProvEntry .1.3.6.1.4.1.3764.1.1.30.61.2.2.10.1 |
dpnGateUtpFramerInterfaceNameThis attribute contains a hardware component name.
The attribute associates the application with a specific link. This
defines the module processor on which Framer's parent component
(as well as Framer itself) will run.rw Link .1.3.6.1.4.1.3764.1.1.30.61.2.2.10.1.1 |
dpnGateUtpFramerLinkTableThis group contains attributes defining the framing of data on the
link interface. SEQUENCE OF DpnGateUtpFramerLinkEntry .1.3.6.1.4.1.3764.1.1.30.61.2.2.11 |
dpnGateUtpFramerLinkEntryAn entry in the dpnGateUtpFramerLinkTable. DpnGateUtpFramerLinkEntry .1.3.6.1.4.1.3764.1.1.30.61.2.2.11.1 |
dpnGateUtpFramerFramingTypeThis attribute defines the type of framing on the link.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.61.2.2.11.1.1 |
dpnGateUtpFramerDataInversionThis attribute determines whether data bits are to be inverted (1 to 0
and 0 to 1) before transmission of frames to the interface. If the
value of this attribute is On, the incoming data bits will also be
inverted when frames are received from the link before being
processed.
This option is typically used in hdlc framing mode when inversion
is used to guarantee 1's density.
Note that aborts (in hdlc and interrupting modes) are corrupted
when data is inverted.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.61.2.2.11.1.2 |
dpnGateUtpFramerFrameCrcTypeThis attribute defines the type of CRC used.
The CRC value calculated is appended to the end of the frames
transmitted to the link. The CRC value is removed from the end of
frames received from the link and checked for correctness.
NoCrc means that CRC is not used.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.61.2.2.11.1.3 |
dpnGateUtpFramerFlagsBetweenFramesThis attribute defines the number of flags that are inserted between
frames sent to the link interface.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.61.2.2.11.1.4 |
dpnGateUtpFramerStateTableThis group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. SEQUENCE OF DpnGateUtpFramerStateEntry .1.3.6.1.4.1.3764.1.1.30.61.2.2.12 |
dpnGateUtpFramerStateEntryAn entry in the dpnGateUtpFramerStateTable. DpnGateUtpFramerStateEntry .1.3.6.1.4.1.3764.1.1.30.61.2.2.12.1 |
dpnGateUtpFramerAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.61.2.2.12.1.1 |
dpnGateUtpFramerOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.61.2.2.12.1.2 |
dpnGateUtpFramerUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.61.2.2.12.1.3 |
dpnGateUtpFramerStatsTableThis group contains the operational statistics data for a UTP Framer
component. SEQUENCE OF DpnGateUtpFramerStatsEntry .1.3.6.1.4.1.3764.1.1.30.61.2.2.13 |
dpnGateUtpFramerStatsEntryAn entry in the dpnGateUtpFramerStatsTable. DpnGateUtpFramerStatsEntry .1.3.6.1.4.1.3764.1.1.30.61.2.2.13.1 |
dpnGateUtpFramerFrmToIfThe number of frames transmitted to the link interface by Framer.
Note: This does not include the number of frames transmitted
directly to the hardware queue, thus bypassing the Framer
component.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.61.2.2.13.1.1 |
dpnGateUtpFramerFrmFromIfThe number of frames received from the link interface by Framer.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.61.2.2.13.1.2 |
dpnGateUtpFramerOctetFromIfThe number of bytes received from the link interface by Framer.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.61.2.2.13.1.3 |
dpnGateUtpFramerAbortsThis attribute is the total number of aborts received.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.61.2.2.13.1.4 |
dpnGateUtpFramerCrcErrorsThis attribute is the total number of frames with CRC errors,
occurring in the receive direction from the link.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.61.2.2.13.1.5 |
dpnGateUtpFramerLrcErrorsThis attribute is the total number of frames with LRC errors,
occurring in the Tx link prior to transmission onto the link.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.61.2.2.13.1.6 |
dpnGateUtpFramerNonOctetErrorsThis attribute is the total number of frames that were non octet
aligned.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.61.2.2.13.1.7 |
dpnGateUtpFramerOverrunsThis attribute is the total number of frames received from the link
for which overruns occurred.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.61.2.2.13.1.8 |
dpnGateUtpFramerUnderrunsThis attribute is the total number of frames transmitted to the link
for which underruns occurred.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.61.2.2.13.1.9 |
dpnGateUtpFramerLargeFrmErrorsThis attribute is the total number of frames received which were too
large. The frame execeeded the maximumFrameLengthLimit
provisioned attribute or it contained more than the 255 block
hardware limit.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.61.2.2.13.1.10 |
dpnGateUtpFramerFrmModeErrorsThis attribute is the total number of frames detected with framing
mode errors. A framingModeError is flagged when frames are
inconsistent with the specified framingType, that is when
interrupting frames are used while running in hdlc mode.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.61.2.2.13.1.11 |
dpnGateUtpFramerOutOfSequenceFrmThis attribute is the total number of out of sequence frames in
interrupting mode that have been received from the link.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.61.2.2.13.1.12 |
dpnGateUtpFramerRepeatedFrmThis attribute is the total number of repeated frames (frames with
the same sequence number) in interrupting mode that have been
received from the link.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.61.2.2.13.1.13 |
dpnGateUtpFramerUtilTableThis group contains the link utilization operational data for a
Framer component. SEQUENCE OF DpnGateUtpFramerUtilEntry .1.3.6.1.4.1.3764.1.1.30.61.2.2.14 |
dpnGateUtpFramerUtilEntryAn entry in the dpnGateUtpFramerUtilTable. DpnGateUtpFramerUtilEntry .1.3.6.1.4.1.3764.1.1.30.61.2.2.14.1 |
dpnGateUtpFramerNormPrioLinkUtilToIfThis attribute is the utilization of the normal and high priority data
traffic (interruptable traffic) sent to the link as a percentage of the
available bandwidth on the link. Note that this includes traffic with
Transfer Priorities (TP) of 0, 6 and 9 and/or Emission Priority of 2
and 3. The utilization is the average for the last minute.ro Gauge32 .1.3.6.1.4.1.3764.1.1.30.61.2.2.14.1.1 |
dpnGateUtpFramerHighPrioLinkUtilToIfThis attribute is the utilization of the interrupting priority data traffic
sent to the link as a percentage of the available bandwidth on the
link. Note that this includes traffic with a Transfer Priority (TP) of
11 and/or Emission Priority of 1. The utilization is the average for
the last minute.ro Gauge32 .1.3.6.1.4.1.3764.1.1.30.61.2.2.14.1.2 |
dpnGateUtpFramerNormPrioLinkUtilFromIfThis attribute is the utilization of the normal and high priority data
traffic (interruptable traffic) received from the link as a percentage
of the available bandwidth on the link. Note that this includes traffic
with Transfer Priorities (TP) of 0, 6 and 9 and/or Emission Priority
of 2 and 3. The utilization is the average for the last minute.ro Gauge32 .1.3.6.1.4.1.3764.1.1.30.61.2.2.14.1.3 |
dpnGateUtpFramerHighPrioLinkUtilFromIfThis attribute is the utilization of the interrupting priority data
(interrupting traffic) received from the link as a percentage of the
available bandwidth on the link. Note that this includes traffic with
a Transfer Priority (TP) of 11 and/or Emission Priority of 1. The
utilization is the average for the last minute.ro Gauge32 .1.3.6.1.4.1.3764.1.1.30.61.2.2.14.1.4 |
dpnGateUtpFramerUtilThresholdTableThis group contains all of the provisioning data required to set the
link utilization alarm thresholds. All thresholds are percentages
which can take on any value in the range of 0% through 100%. The
value 100% is used to disable an individual threshold. For values
other than 100%, a semantic check ensures that the minor alarm
threshold is less than the other thresholds and that the major alarm
threshold is less than the critical alarm threshold. SEQUENCE OF DpnGateUtpFramerUtilThresholdEntry .1.3.6.1.4.1.3764.1.1.30.61.2.2.15 |
dpnGateUtpFramerUtilThresholdEntryAn entry in the dpnGateUtpFramerUtilThresholdTable. DpnGateUtpFramerUtilThresholdEntry .1.3.6.1.4.1.3764.1.1.30.61.2.2.15.1 |
dpnGateUtpFramerMinorLinkUtilAlarmThresholdThis attribute provides the threshold value which defines when a
minor alarm would be issued, denoting a sustained total average
link utilization. The total average link utilization is calculated based
on the number of received bytes. The Set alarm is issued after 3
minutes of utilization greater than the given threshold. The
corresponding Clear alarm is issued after a subsequent 3 minutes of
utilization less than or equal to the given threshold.
The value 100% is used to disable an individual threshold. For
values other than 100%, a semantic check ensures that the minor
alarm threshold is less than the other thresholds.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.61.2.2.15.1.1 |
dpnGateUtpFramerMajorLinkUtilAlarmThresholdThis attribute provides the threshold value which defines when a
major alarm would be issued, denoting a sustained total average
link utilization. The total average link utilization is calculated based
on the number of received bytes. The Set alarm is issued after 3
minutes of utilization greater than the given threshold. The
corresponding Clear alarm is issued after a subsequent 3 minutes of
utilization less than or equal to the given threshold.
The value 100% is used to disable an individual threshold. For
values other than 100%, a semantic check ensures that the major
alarm threshold is greater than the minor threshold and less than the
critical threshold.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.61.2.2.15.1.2 |
dpnGateUtpFramerCriticalLinkUtilAlarmThresholdThis attribute provides the threshold value which defines when a
critical alarm would be issued, denoting a sustained total average
link utilization. The total average link utilization is calculated based
on the number of received bytes. The Set alarm is issued after 3
minutes of utilization greater than the given threshold. The
corresponding Clear alarm is issued after a subsequent 3 minutes of
utilization less than or equal to the given threshold.
The value 100% is used to disable an individual threshold. For
values other than 100%, a semantic check ensures that the critical
alarm threshold is greater than the other thresholds.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.61.2.2.15.1.3 |
dpnGateUtpFramerLinkUtilAlarmStatusThis attribute provides control of the generation of link utilization
alarms. If the value is disabled, none of the alarms are generated
(this is equivalent to setting all of the thresholds to 100%). If the
value is enabled, the individual thresholds are handled.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.61.2.2.15.1.4 |
dpnGateUtpProvTableThis group of provisionable attributes contains the parameters used
by Unacknowledged, Utp, and FrAccess for monitoring link quality. SEQUENCE OF DpnGateUtpProvEntry .1.3.6.1.4.1.3764.1.1.30.61.2.10 |
dpnGateUtpProvEntryAn entry in the dpnGateUtpProvTable. DpnGateUtpProvEntry .1.3.6.1.4.1.3764.1.1.30.61.2.10.1 |
dpnGateUtpMaximumErroredIntervalThis attribute specifies the interval time over which the error
threshold (as specified by receiveErrorSensitivity) must be
continuously exceeded before the Unacknowledged, Utp, or
FrAccess component can be degraded. Once the error interval count
exceeds the provisioned value, the Unacknowledged, Utp, or
FrAccess component issues an alarm indicating that link quality has
degraded, and it disables its parent component. The exception to
this is a value of zero, the default, which indicates that the
mechanism is completely disabled.rw Unsigned32 (0 | 1..15) .1.3.6.1.4.1.3764.1.1.30.61.2.10.1.1 |
dpnGateUtpReceiveErrorSensitivityThis attribute is the allowable error rate beyond which the
Unacknowledged, Utp, or FrAccess component can be degraded if it
persists for a duration longer than the maximumErrorInterval. The
threshold is expressed as a percentage of number of errored frames
in the last interval per number of frames received in the last interval.
The exception to this is a value of zero, which indicates that the
mechanism is completely disabled. The configurable values are:
0 = the mechanism is completely disabled
1 = 1/(2**1)
2 = 1/(2**2)
3 = 1/(2**3)
:
10 = 1/(2**10)rw Unsigned32 (0 | 1..10) .1.3.6.1.4.1.3764.1.1.30.61.2.10.1.2 |
dpnGateUtpStateTableThis group contains the three OSI State attributes and the six OSI
Status attributes. The descriptions generically indicate what each
attribute implies about the component. Note that not all the values
and state combinations described here are supported by every
component which uses this group. For component-specific
information and the valid state combinations, refer to NTP 241-
7001-150, Passport Operations and Maintenance Guide. SEQUENCE OF DpnGateUtpStateEntry .1.3.6.1.4.1.3764.1.1.30.61.2.11 |
dpnGateUtpStateEntryAn entry in the dpnGateUtpStateTable. DpnGateUtpStateEntry .1.3.6.1.4.1.3764.1.1.30.61.2.11.1 |
dpnGateUtpAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.61.2.11.1.1 |
dpnGateUtpOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.61.2.11.1.2 |
dpnGateUtpUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.61.2.11.1.3 |
dpnGateUtpAvailabilityStatusIf supported by the component, this attribute indicates the OSI
Availability status of the component. Note that, even though it is
defined as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value inTest indicates that the resource is undergoing a test
procedure. If adminState is locked or shuttingDown, the normal
users are precluded from using the resource and controlStatus is
reservedForTest. Tests that do not exclude additional users can be
present in any operational or administrative state but the
reservedForTest condition should not be present.
The value failed indicates that the component has an internal fault
that prevents it from operating. The operationalState is disabled.
The value dependency indicates that the component cannot operate
because some other resource on which it depends is unavailable.
The operationalState is disabled.
The value powerOff indicates the resource requires power to be
applied and it is not powered on. The operationalState is disabled.
The value offLine indicates the resource requires a routine
operation (either manual, automatic, or both) to be performed to
place it on-line and make it available for use. The operationalState
is disabled.
The value offDuty indicates the resource is inactive in accordance
with a predetermined time schedule. In the absence of other
disabling conditions, the operationalState is enabled or disabled.
The value degraded indicates the service provided by the
component is degraded in some way, such as in speed or operating
capacity. However, the resource remains available for service. The
operationalState is enabled.
The value notInstalled indicates the resource is not present. The
operationalState is disabled.
The value logFull is not used.
Description of bits:
inTest(0)
failed(1)
powerOff(2)
offLine(3)
offDuty(4)
dependency(5)
degraded(6)
notInstalled(7)
logFull(8)ro OCTET STRING .1.3.6.1.4.1.3764.1.1.30.61.2.11.1.4 |
dpnGateUtpProceduralStatusIf supported by the component, this attribute indicates the OSI
Procedural status of the component. Note that, even though it is
defined as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value initializationRequired indicates (for a resource which
doesn't initialize autonomously) that initialization is required before
it can perform its normal functions, and this procedure has not been
initiated. The operationalState is disabled.
The value notInitialized indicates (for a resource which does
initialize autonomously) that initialization is required before it can
perform its normal functions, and this procedure has not been
initiated. The operationalState may be enabled or disabled.
The value initializing indicates that initialization has been initiated
but is not yet complete. The operationalState may be enabled or
disabled.
The value reporting indicates the resource has completed some
processing operation and is notifying the results. The
operationalState is enabled.
The value terminating indicates the component is in a termination
phase. If the resource doesn't reinitialize autonomously,
operationalState is disabled; otherwise it is enabled or disabled.
Description of bits:
initializationRequired(0)
notInitialized(1)
initializing(2)
reporting(3)
terminating(4)ro OCTET STRING .1.3.6.1.4.1.3764.1.1.30.61.2.11.1.5 |
dpnGateUtpControlStatusIf supported by the component, this attribute indicates the OSI
Control status of the component. Note that, even though it is defined
as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value subjectToTest indicates the resource is available but tests
may be conducted simultaneously at unpredictable times, which
may cause it to exhibit unusual characteristics.
The value partOfServicesLocked indicates that part of the service is
restricted from users of a resource. The adminState is unlocked.
The value reservedForTest indicates that the component is
administratively unavailable because it is undergoing a test
procedure. The adminState is locked.
The value suspended indicates that the service has been
administratively suspended.
Description of bits:
subjectToTest(0)
partOfServicesLocked(1)
reservedForTest(2)
suspended(3)ro OCTET STRING .1.3.6.1.4.1.3764.1.1.30.61.2.11.1.6 |
dpnGateUtpAlarmStatusIf supported by the component, this attribute indicates the OSI
Alarm status of the component. Note that, even though it is defined
as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value underRepair indicates the component is currently being
repaired. The operationalState is enabled or disabled.
The value critical indicates one or more critical alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value major indicates one or more major alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value minor indicates one or more minor alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value alarmOutstanding generically indicates that an alarm of
some severity is outstanding against the component.
Description of bits:
underRepair(0)
critical(1)
major(2)
minor(3)
alarmOutstanding(4)ro OCTET STRING .1.3.6.1.4.1.3764.1.1.30.61.2.11.1.7 |
dpnGateUtpStandbyStatusIf supported by the component, this attribute indicates the OSI
Standby status of the component.
The value notSet indicates that either the attribute is not supported
or that none of the status conditions described below are present.
Note that this is a non-standard value, used because the original
specification indicated this attribute was set-valued and thus, did not
provide a value to indicate that none of the other three are
applicable.
The value hotStandby indicates that the resource is not providing
service but will be immediately able to take over the role of the
resource to be backed up, without initialization activity, and
containing the same information as the resource to be backed up.
The value coldStandby indicates the resource is a backup for
another resource but will not be immediately able to take over the
role of the backed up resource and will require some initialization
activity.
The value providingService indicates that this component, as a
backup resource, is currently backing up another resource.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.61.2.11.1.8 |
dpnGateUtpUnknownStatusThis attribute indicates the OSI Unknown status of the component.
The value false indicates that all of the other OSI State and Status
attribute values can be considered accurate.
The value true indicates that the actual state of the component is not
known for sure.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.61.2.11.1.9 |
dpnGateUtpOpTableThis group of attributes contains the set of UTP operational
parameters measured and maintained by this component. SEQUENCE OF DpnGateUtpOpEntry .1.3.6.1.4.1.3764.1.1.30.61.2.12 |
dpnGateUtpOpEntryAn entry in the dpnGateUtpOpTable. DpnGateUtpOpEntry .1.3.6.1.4.1.3764.1.1.30.61.2.12.1 |
dpnGateUtpRoundTripDelayThis is the measured Round Trip Delay (ms) discovered with the
remote through the UTP staging protocol. The value includes
emission, propagation, and queuing delays. A 2 byte control frame
is used to perform the measurement. A value of zero is displayed
when the link is disabled or the measured Round Trip Delay is
unknown.ro Gauge32 .1.3.6.1.4.1.3764.1.1.30.61.2.12.1.1 |
dpnGateUtpStatsTableThis group of attributes contains the set of Utp frame counters
collected by this component. SEQUENCE OF DpnGateUtpStatsEntry .1.3.6.1.4.1.3764.1.1.30.61.2.13 |
dpnGateUtpStatsEntryAn entry in the dpnGateUtpStatsTable. DpnGateUtpStatsEntry .1.3.6.1.4.1.3764.1.1.30.61.2.13.1 |
dpnGateUtpDiscardBadFromIfThis attribute is the number of received frames discarded by the Utp
component. UTP discards any received frame that is unknown to its
protocol. This counter wraps around to zero when the maximum
value is reached.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.61.2.13.1.1 |
dpnGateUtpDiscardExcessToIfThis attribute is the number of transmitted frames discarded by the
Utp component. Transmitted frames are discarded if the wait for
transmission queue is congested. This counter wraps around to zero
when the maximum value is reached.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.61.2.13.1.2 |
dpnGateUtpFrmRexmtToIfThis attribute is the number of frames retransmitted by the Utp
component. This counter wraps around to zero when the maximum
value is reached.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.61.2.13.1.3 |
dpnGateUtpAreYouThereModeEntriesThis attribute is the number of times the Utp component entered the
AreYouThere mode. UTP enters this mode whenever the
acknowledgment for the last transmitted frame has not been
received within a certain time interval. In this mode UTP verifies
that the remote end is still active. If so, it will retransmit all frames
that were waiting to be acknowledged. This counter wraps around
to zero when the maximum value is reached.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.61.2.13.1.4 |
dpnGateUtpWindowClosuresThis attribute is the number of times the Utp component closed its
frame window. The frame window determines the maximum
number of unacknowledged frames allowed. Typically, the frame
window closes when the remote end cannot keep up with the frame
arrival rate. This counter wraps around to zero when the maximum
value is reached.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.61.2.13.1.5 |