Nortel-Magellan-Passport-SoftwareMIB
AI MIB Summary
Standard SNMP MIB module defining data structures for Nortel-Magellan-Passport-SoftwareMIB.
103
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
103 total| Object Name |
|---|
softwareMIB OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.17 |
IMPORTS Unknown .1.3.6.1.4.1.562.2.4.2.17 |
softwareGroup OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.17.1 |
softwareGroupBE OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.17.1.5 |
softwareGroupBE01 OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.17.1.5.2 |
softwareGroupBE01A OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.17.1.5.2.2 |
softwareCapabilities OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.17.3 |
softwareCapabilitiesBE OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.17.3.5 |
softwareCapabilitiesBE01 OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.17.3.5.2 |
softwareCapabilitiesBE01A OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.17.3.5.2.2 |
sw OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.14 |
swRowStatusTableThis entry controls the addition and deletion of
sw components. SEQUENCE OF SwRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.14.1 |
swRowStatusEntryA single entry in the table represents a single
sw component. SwRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.14.1.1 |
swRowStatusThis variable is used as the basis for SNMP naming of
sw components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.14.1.1.1 |
swComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.14.1.1.2 |
swStorageTypeThis variable represents the storage type value for the
sw tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.14.1.1.4 |
swIndexThis variable represents the index for the sw tables. NonReplicated .1.3.6.1.4.1.3764.1.1.30.14.1.1.10 |
swDld OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.14.2 |
swDldRowStatusTableThis entry controls the addition and deletion of
swDld components. SEQUENCE OF SwDldRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.14.2.1 |
swDldRowStatusEntryA single entry in the table represents a single
swDld component. SwDldRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.14.2.1.1 |
swDldRowStatusThis variable is used as the basis for SNMP naming of
swDld components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.14.2.1.1.1 |
swDldComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.14.2.1.1.2 |
swDldStorageTypeThis variable represents the storage type value for the
swDld tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.14.2.1.1.4 |
swDldIndexThis variable represents the index for the swDld tables. NonReplicated .1.3.6.1.4.1.3764.1.1.30.14.2.1.1.10 |
swDldOperTableThis group contains the operational attributes for the Download
component. SEQUENCE OF SwDldOperEntry .1.3.6.1.4.1.3764.1.1.30.14.2.10 |
swDldOperEntryAn entry in the swDldOperTable. SwDldOperEntry .1.3.6.1.4.1.3764.1.1.30.14.2.10.1 |
swDldAvBeingDownloadedThis attribute indicates the name of the AV currently being
downloaded. If the download is inProgress, the value of this
attribute is the first AV in the list of AVs to be downloaded. If there
is no AV being downloaded, this attribute contains an empty string.ro AsciiString .1.3.6.1.4.1.3764.1.1.30.14.2.10.1.1 |
swDldStatusThis attribute indicates the download status.
If it is inactive, no download is in progress. This is the value
required in order to issue a Start command.
If it is inProgress, the download procedure has begun. This process
starts from the time a Software Distribution Site (SDS) login is
attempted and continues through the time during which files are
actually being transferred.
If it is stopping, a user has requested a stoppage but the connections
have not yet been completely torn down.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.14.2.10.1.2 |
swDldFilesToTransferThis attribute indicates the number of files which are still left to
transfer for the AV currently being downloaded. It is cleared each
time a new AV is processed from the avListToDownload. Note that
for each AV, the value of this attribute is 0 until the actual number of
files to transfer has been computed.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.14.2.10.1.3 |
swDldProcessorTargetsThis attribute indicated the processor based object file to download
on switch.
Description of bits:
i960(0)
ppc(1)rw OCTET STRING .1.3.6.1.4.1.3764.1.1.30.14.2.10.1.4 |
swDldDldListTableThis attribute holds the list of names of AVs to be downloaded. If a
download is in progress, the first one in the list is the one currently
being downloaded. As AVs are successfully downloaded, they are
removed from this list and added to the downloadedAvList.
The user cannot specify an AV which already exists on disk. It must
first be removed before re-downloading it (see the Tidy and Remove
commands). SEQUENCE OF SwDldDldListEntry .1.3.6.1.4.1.3764.1.1.30.14.2.260 |
swDldDldListEntryAn entry in the swDldDldListTable. SwDldDldListEntry .1.3.6.1.4.1.3764.1.1.30.14.2.260.1 |
swDldDldListValueThis variable represents both the value and the index for the
swDldDldListTable.rw AsciiString .1.3.6.1.4.1.3764.1.1.30.14.2.260.1.1 |
swDldDldListRowStatusThis variable is used to control the addition and deletion
of individual values of the swDldDldListTable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.14.2.260.1.2 |
swDldDownloadedAvListTableThis attribute holds the list of names of AVs which have been
successfully downloaded as a result of the last Start command. It is
cleared each time the Start command is issued. SEQUENCE OF SwDldDownloadedAvListEntry .1.3.6.1.4.1.3764.1.1.30.14.2.261 |
swDldDownloadedAvListEntryAn entry in the swDldDownloadedAvListTable. SwDldDownloadedAvListEntry .1.3.6.1.4.1.3764.1.1.30.14.2.261.1 |
swDldDownloadedAvListValueThis variable represents both the value and the index for the
swDldDownloadedAvListTable.ro AsciiString .1.3.6.1.4.1.3764.1.1.30.14.2.261.1.1 |
swAv OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.14.3 |
swAvRowStatusTable*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This entry controls the addition and deletion of
swAv components. SEQUENCE OF SwAvRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.14.3.1 |
swAvRowStatusEntryA single entry in the table represents a single
swAv component. SwAvRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.14.3.1.1 |
swAvRowStatusThis variable is used as the basis for SNMP naming of
swAv components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.14.3.1.1.1 |
swAvComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.14.3.1.1.2 |
swAvStorageTypeThis variable represents the storage type value for the
swAv tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.14.3.1.1.4 |
swAvIndexThis variable represents the index for the swAv tables. AsciiStringIndex .1.3.6.1.4.1.3764.1.1.30.14.3.1.1.10 |
swAvFeat OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.14.3.2 |
swAvFeatRowStatusTable*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This entry controls the addition and deletion of
swAvFeat components. SEQUENCE OF SwAvFeatRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.14.3.2.1 |
swAvFeatRowStatusEntryA single entry in the table represents a single
swAvFeat component. SwAvFeatRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.14.3.2.1.1 |
swAvFeatRowStatusThis variable is used as the basis for SNMP naming of
swAvFeat components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.14.3.2.1.1.1 |
swAvFeatComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.14.3.2.1.1.2 |
swAvFeatStorageTypeThis variable represents the storage type value for the
swAvFeat tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.14.3.2.1.1.4 |
swAvFeatIndexThis variable represents the index for the swAvFeat tables. AsciiStringIndex .1.3.6.1.4.1.3764.1.1.30.14.3.2.1.1.10 |
swAvPatch OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.14.3.3 |
swAvPatchRowStatusTable*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This entry controls the addition and deletion of
swAvPatch components. SEQUENCE OF SwAvPatchRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.14.3.3.1 |
swAvPatchRowStatusEntryA single entry in the table represents a single
swAvPatch component. SwAvPatchRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.14.3.3.1.1 |
swAvPatchRowStatusThis variable is used as the basis for SNMP naming of
swAvPatch components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.14.3.3.1.1.1 |
swAvPatchComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.14.3.3.1.1.2 |
swAvPatchStorageTypeThis variable represents the storage type value for the
swAvPatch tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.14.3.3.1.1.4 |
swAvPatchIndexThis variable represents the index for the swAvPatch tables. AsciiStringIndex .1.3.6.1.4.1.3764.1.1.30.14.3.3.1.1.10 |
swAvPatchOperTable*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This group contains the operational attributes for the Patch
component. SEQUENCE OF SwAvPatchOperEntry .1.3.6.1.4.1.3764.1.1.30.14.3.3.10 |
swAvPatchOperEntryAn entry in the swAvPatchOperTable. SwAvPatchOperEntry .1.3.6.1.4.1.3764.1.1.30.14.3.3.10.1 |
swAvPatchDescriptionThis attribute indicates the new behavior that the patch provides.
The availability of this description is dependent on the disk being
available.ro AsciiString .1.3.6.1.4.1.3764.1.1.30.14.3.3.10.1.1 |
swAvOperTable*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This group contains the operational attributes for an AV component. SEQUENCE OF SwAvOperEntry .1.3.6.1.4.1.3764.1.1.30.14.3.10 |
swAvOperEntryAn entry in the swAvOperTable. SwAvOperEntry .1.3.6.1.4.1.3764.1.1.30.14.3.10.1 |
swAvProcessorTargetsThis is a list of the processor based object file types which exist on
disk for a given AV. Semantic check will validate that the object
files needed for a provisioned card type are present as part of an
application.
Description of bits:
i960(0)
ppc(1)ro OCTET STRING .1.3.6.1.4.1.3764.1.1.30.14.3.10.1.1 |
swAvCompatibleAvListTable*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This is a list of the AV names which specify the minimum version
of all other applications that can be used in conjunction with this AV
in an AVL. Semantic checks will validate that AVs within the AVL
are indeed compatible. SEQUENCE OF SwAvCompatibleAvListEntry .1.3.6.1.4.1.3764.1.1.30.14.3.259 |
swAvCompatibleAvListEntryAn entry in the swAvCompatibleAvListTable. SwAvCompatibleAvListEntry .1.3.6.1.4.1.3764.1.1.30.14.3.259.1 |
swAvCompatibleAvListValueThis variable represents both the value and the index for the
swAvCompatibleAvListTable.ro AsciiString .1.3.6.1.4.1.3764.1.1.30.14.3.259.1.1 |
swLpt OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.14.4 |
swLptRowStatusTableThis entry controls the addition and deletion of
swLpt components. SEQUENCE OF SwLptRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.14.4.1 |
swLptRowStatusEntryA single entry in the table represents a single
swLpt component. SwLptRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.14.4.1.1 |
swLptRowStatusThis variable is used as the basis for SNMP naming of
swLpt components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.14.4.1.1.1 |
swLptComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.14.4.1.1.2 |
swLptStorageTypeThis variable represents the storage type value for the
swLpt tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.14.4.1.1.4 |
swLptIndexThis variable represents the index for the swLpt tables. AsciiStringIndex .1.3.6.1.4.1.3764.1.1.30.14.4.1.1.10 |
swLptProvTableThis group contains the provisionable attributes for the LPT
component. SEQUENCE OF SwLptProvEntry .1.3.6.1.4.1.3764.1.1.30.14.4.10 |
swLptProvEntryAn entry in the swLptProvTable. SwLptProvEntry .1.3.6.1.4.1.3764.1.1.30.14.4.10.1 |
swLptCommentTextAn arbitrary string used to enter a comment about an LPT.rw AsciiString .1.3.6.1.4.1.3764.1.1.30.14.4.10.1.1 |
swLptSystemConfigThis attribute specifies which set of preconfigured system
parameters to use for the set of Features selected in featureList.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.14.4.10.1.2 |
swLptFlTableThis attribute specifies a list of names of Features that define a
particular configuration of application functionality that the user
wants to load on a single processor.
The combination of Features selected must be compatible (for
example, none can be mutually exclusive with another in the list).
All Features must belong to an AV specified in the AVL.
All Features must be able to be loaded on any of the Cards which
are linked to LPs which are linked to this LPT.
All prerequisite Features of the ones in this list will also be loaded. SEQUENCE OF SwLptFlEntry .1.3.6.1.4.1.3764.1.1.30.14.4.257 |
swLptFlEntryAn entry in the swLptFlTable. SwLptFlEntry .1.3.6.1.4.1.3764.1.1.30.14.4.257.1 |
swLptFlValueThis variable represents both the value and the index for the
swLptFlTable.rw AsciiString .1.3.6.1.4.1.3764.1.1.30.14.4.257.1.1 |
swLptFlRowStatusThis variable is used to control the addition and deletion
of individual values of the swLptFlTable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.14.4.257.1.2 |
swLptLogicalProcessorsTableThis attribute shows which LPs are configured to load the Feature
files associated with this LPT. It is the opposite side of the LP
component's logicalProcessorType link attribute. SEQUENCE OF SwLptLogicalProcessorsEntry .1.3.6.1.4.1.3764.1.1.30.14.4.258 |
swLptLogicalProcessorsEntryAn entry in the swLptLogicalProcessorsTable. SwLptLogicalProcessorsEntry .1.3.6.1.4.1.3764.1.1.30.14.4.258.1 |
swLptLogicalProcessorsValueThis variable represents both the value and the index for the
swLptLogicalProcessorsTable.ro Link .1.3.6.1.4.1.3764.1.1.30.14.4.258.1.1 |
swOperTableThis group contain the operational attributes for the SW component. SEQUENCE OF SwOperEntry .1.3.6.1.4.1.3764.1.1.30.14.11 |
swOperEntryAn entry in the swOperTable. SwOperEntry .1.3.6.1.4.1.3764.1.1.30.14.11.1 |
swTidyStatusThis attribute indicates the tidy or remove status. If the value is
inactive, no tidy or remove is in progress. If the value is inProgress
or querying, the tidy or remove process has begun and therefore no
further Tidy Sw or Remove sw/<avName> command is allowed
until status returns to inactive.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.14.11.1.1 |
swAvBeingTidiedThis attribute indicates the name of the AV currently being tidied or
removed. An empty string indicates there is no AV being tidied.ro AsciiString .1.3.6.1.4.1.3764.1.1.30.14.11.1.421 |
swAvlTableThis attribute specifies, for each application, which version of its
Features and the associated software will be loaded when any of its
Features are selected in an LPT.
A version of the 'base' application must be specified.
All names specified by the user must actually be AV names.
All AVs specified must be compatible with each other.
No more than one version of a single application can be specified. SEQUENCE OF SwAvlEntry .1.3.6.1.4.1.3764.1.1.30.14.256 |
swAvlEntryAn entry in the swAvlTable. SwAvlEntry .1.3.6.1.4.1.3764.1.1.30.14.256.1 |
swAvlValueThis variable represents both the value and the index for the
swAvlTable.rw AsciiString .1.3.6.1.4.1.3764.1.1.30.14.256.1.1 |
swAvlRowStatusThis variable is used to control the addition and deletion
of individual values of the swAvlTable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.14.256.1.2 |
swAvListToTidyTableThis attribute holds the list of names of AVs to be tidied or
removed. As AVs are successfully cleaned, they are removed from
this list and added to avListTidied. SEQUENCE OF SwAvListToTidyEntry .1.3.6.1.4.1.3764.1.1.30.14.422 |
swAvListToTidyEntryAn entry in the swAvListToTidyTable. SwAvListToTidyEntry .1.3.6.1.4.1.3764.1.1.30.14.422.1 |
swAvListToTidyValueThis variable represents both the value and the index for the
swAvListToTidyTable.ro AsciiString .1.3.6.1.4.1.3764.1.1.30.14.422.1.1 |
swAvListTidiedTableThis attribute holds the list of names of AVs which have been
successfully tidied or removed as a result of the last Tidy Sw or
Remove Sw av/<avName> command. It is cleared each time a new
Tidy Sw or Remove Sw av/<avName> command is issued. SEQUENCE OF SwAvListTidiedEntry .1.3.6.1.4.1.3764.1.1.30.14.423 |
swAvListTidiedEntryAn entry in the swAvListTidiedTable. SwAvListTidiedEntry .1.3.6.1.4.1.3764.1.1.30.14.423.1 |
swAvListTidiedValueThis variable represents both the value and the index for the
swAvListTidiedTable.ro AsciiString .1.3.6.1.4.1.3764.1.1.30.14.423.1.1 |
swPatlTableThis attribute specifies which patches are to be loaded and enabled.
Only patches for Av's that appear in the AvList may be specified.
Only patches appearing as instances of Sw Av Patch may be
specified.
Patch names are case insensitive. Except for case, patch names must
be typed as they appear as instances of Sw Av Patch.
All patches specified must be compatible with one another.
Any prerequisite patches for specified patches, must themselves be
specified.
A patch must be specified only once in the list. SEQUENCE OF SwPatlEntry .1.3.6.1.4.1.3764.1.1.30.14.436 |
swPatlEntryAn entry in the swPatlTable. SwPatlEntry .1.3.6.1.4.1.3764.1.1.30.14.436.1 |
swPatlValueThis variable represents both the value and the index for the
swPatlTable.rw AsciiString .1.3.6.1.4.1.3764.1.1.30.14.436.1.1 |
swPatlRowStatusThis variable is used to control the addition and deletion
of individual values of the swPatlTable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.14.436.1.2 |