Nortel-Magellan-Passport-PppMIB
AI MIB Summary
Standard SNMP MIB module defining data structures for Nortel-Magellan-Passport-PppMIB.
202
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
202 total| Object Name |
|---|
pppMIB OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.33 |
IMPORTS Unknown .1.3.6.1.4.1.562.2.4.2.33 |
pppGroup OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.33.1 |
pppGroupBC OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.33.1.3 |
pppGroupBC02 OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.33.1.3.3 |
pppGroupBC02A OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.33.1.3.3.2 |
pppCapabilities OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.33.3 |
pppCapabilitiesBC OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.33.3.3 |
pppCapabilitiesBC02 OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.33.3.3.3 |
pppCapabilitiesBC02A OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.33.3.3.3.2 |
ppp OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.102 |
pppRowStatusTableThis entry controls the addition and deletion of
ppp components. SEQUENCE OF PppRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.102.1 |
pppRowStatusEntryA single entry in the table represents a single
ppp component. PppRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.102.1.1 |
pppRowStatusThis variable is used as the basis for SNMP naming of
ppp components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.102.1.1.1 |
pppComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.102.1.1.2 |
pppStorageTypeThis variable represents the storage type value for the
ppp tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.102.1.1.4 |
pppIndexThis variable represents the index for the ppp tables. Integer32 .1.3.6.1.4.1.3764.1.1.30.102.1.1.10 |
pppLnk OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.102.2 |
pppLnkRowStatusTableThis entry controls the addition and deletion of
pppLnk components. SEQUENCE OF PppLnkRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.102.2.1 |
pppLnkRowStatusEntryA single entry in the table represents a single
pppLnk component. PppLnkRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.102.2.1.1 |
pppLnkRowStatusThis variable is used as the basis for SNMP naming of
pppLnk components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.102.2.1.1.1 |
pppLnkComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.102.2.1.1.2 |
pppLnkStorageTypeThis variable represents the storage type value for the
pppLnk tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.102.2.1.1.4 |
pppLnkIndexThis variable represents the index for the pppLnk tables. NonReplicated .1.3.6.1.4.1.3764.1.1.30.102.2.1.1.10 |
pppLnkProvTableThis group contains the provisioned attributes for the Ppp Link
component. SEQUENCE OF PppLnkProvEntry .1.3.6.1.4.1.3764.1.1.30.102.2.10 |
pppLnkProvEntryAn entry in the pppLnkProvTable. PppLnkProvEntry .1.3.6.1.4.1.3764.1.1.30.102.2.10.1 |
pppLnkConfigInitialMruThis is the initial Maximum Receive Unit (Mru) that the local Ppp entity
will advertise to the remote entity. A change to this attribute will not
take effect until Ppp is restarted (lock/unlock).rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.102.2.10.1.1 |
pppLnkConfigMagicNumberIf enabled then the local node will attempt to perform Magic Number
negotiation with the remote node. If disabled then this negotiation is not
performed. In any event, the local node will comply with any magic
number negotiations attempted by the remote node, per the Ppp
specification. A change to this attribute will not take effect until Ppp is
restarted (lock/unlock).rw Enumeration .1.3.6.1.4.1.3764.1.1.30.102.2.10.1.4 |
pppLnkRestartTimerThis is the time, in milliseconds, that Ppp will wait for a response to a
configure request or a terminate request before retrying.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.102.2.10.1.6 |
pppLnkContinuityMonitorThis attribute turns on/off (enabled/disabled) the Link Continuity
Monitor. If set to enabled, periodic keep alive echo packet will be sent
over the Ppp link. If set to disabled, no keep alive packets will be sent.
A change to this attribute will not take effect until Ppp is restarted (lock/
unlock).rw Enumeration .1.3.6.1.4.1.3764.1.1.30.102.2.10.1.7 |
pppLnkNegativeAckTriesThis attribute specifies the maximum negative acknowledgments sent to
the remote Ppp entity during negotiation before defaulting it's
configuration parameters.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.102.2.10.1.8 |
pppLnkQualityThresholdThis attribute specifies the minimum allowed line quality before the line
is considered too poor to continue operation. The value for this attribute
is a percentage measure of the line quality given in integers (10 to 99).
The higher the value, the more stringent the line requirements.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.102.2.10.1.9 |
pppLnkQualityWindowThis attribute specifies the number of seconds used for sampling line
quality. If line quality drops below the level set with the
qualityThreshold attribute during this window, this instance of Ppp will
be marked down until line quality recovers.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.102.2.10.1.10 |
pppLnkTerminateRequestTriesThis attribute specifies the maximum terminate requests to be sent, when
closing the connection, and not answered before this instance of Ppp
enters a closing state.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.102.2.10.1.11 |
pppLnkConfigureRequestTriesThis attribute specifies the number of configuration requests that will be
sent out and not answered before this instance of Ppp enters a listening
state. If both sides enter the listening state then the link will not come
up. To eliminate this possibility, this attribute should be set to
1000000000. This will ensure that this end of the Ppp link will
continue to try until the link is good.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.102.2.10.1.12 |
pppLnkOperTableThis group contains the Ppp Link Operational attributes. SEQUENCE OF PppLnkOperEntry .1.3.6.1.4.1.3764.1.1.30.102.2.11 |
pppLnkOperEntryAn entry in the pppLnkOperTable. PppLnkOperEntry .1.3.6.1.4.1.3764.1.1.30.102.2.11.1 |
pppLnkOperStateThis is the operational state of the Link Control Protocol. For more
information as to the definition of each state see RFC1331 section 5.3.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.102.2.11.1.1 |
pppLnkLineConditionThis attribute describes the condition of the physical line that Ppp is
running over.
ok: The condition of the line is good.
looped: The line is looped back on itself, probably at the remote end.
noClock: There is a hardware problem with the line. The cable may not
be plugged in correctly.
badLineCondition: The quality of the line is below the
qualityThreshold.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.102.2.11.1.2 |
pppLnkBadAddressesThis attribute counts the number of packets received with an incorrect
Address Field. If this count is going up quickly, it could indicate that
there is a line quality problem or that the remote end is transmitting a
protocol other than Ppp. This counter will wrap around to 0 when it
exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.102.2.11.1.4 |
pppLnkBadControlsThis attribute counts the number of packets received on this link with an
incorrect Control Field. If this count is going up quickly, it could
indicate that there is a line quality problem or that the remote end is
transmitting a protocol other than Ppp. This counter will wrap around to
0 when it exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.102.2.11.1.5 |
pppLnkPacketTooLongsThis attribute counts the number of packets received that have been
discarded because their length exceeded the Maximum Receive Unit
(Mru). This counter will wrap around to 0 when it exceeds its maximum
count.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.102.2.11.1.6 |
pppLnkBadFcssThis attribute counts the number of packets received that have been
discarded due to having an incorrect Frame Check Sequence (Fcs). This
counter will wrap around to 0 when it exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.102.2.11.1.7 |
pppLnkLocalMruThis is the current value of the Maximum Receive Unit (Mru) for the
local Ppp Entity. This value is the Mru that the remote entity is using
when sending packets to the local Ppp entity.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.102.2.11.1.8 |
pppLnkRemoteMruThis is the current value of the Maximum Receive Unit (Mru) for the
remote Ppp entity. This value is the Mru that the local entity is using
when sending packets to the remote Ppp entity.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.102.2.11.1.9 |
pppLnkTransmitFcsSizeThis is the size of the Frame Check Sequence (Fcs) in bits that the local
node will generate when sending packets to the remote node.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.102.2.11.1.16 |
pppLnkReceiveFcsSizeThis is the size of the Frame Check Sequence (Fcs) in bits that the
remote node will generate when sending packets to the local node.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.102.2.11.1.17 |
pppLqm OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.102.3 |
pppLqmRowStatusTableThis entry controls the addition and deletion of
pppLqm components. SEQUENCE OF PppLqmRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.102.3.1 |
pppLqmRowStatusEntryA single entry in the table represents a single
pppLqm component. PppLqmRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.102.3.1.1 |
pppLqmRowStatusThis variable is used as the basis for SNMP naming of
pppLqm components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.102.3.1.1.1 |
pppLqmComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.102.3.1.1.2 |
pppLqmStorageTypeThis variable represents the storage type value for the
pppLqm tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.102.3.1.1.4 |
pppLqmIndexThis variable represents the index for the pppLqm tables. NonReplicated .1.3.6.1.4.1.3764.1.1.30.102.3.1.1.10 |
pppLqmProvTableThis group contains the provisioned attributes for the Ppp Link Quality
Monitor component. SEQUENCE OF PppLqmProvEntry .1.3.6.1.4.1.3764.1.1.30.102.3.10 |
pppLqmProvEntryAn entry in the pppLqmProvTable. PppLqmProvEntry .1.3.6.1.4.1.3764.1.1.30.102.3.10.1 |
pppLqmConfigPeriodThis is the Lqm reporting period that the local Ppp entity will attempt to
negotiate with the remote entity, in units of hundredths of a second. A
value of '0' will allow the remote Ppp entity to determine the reporting
period. A value greater than 180,000 (1/2 hour) will allow the period to
be determined dynamically as a function of the transmit data rate. A
value from 1-9 will be rounded up to 10 during negotiation. A change to
this attribute will not take effect until Ppp is restarted (lock/unlock).rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.102.3.10.1.1 |
pppLqmConfigStatusIf this attribute is enabled, the local node will attempt to perform Lqm
negotiation with the remote node. If it is disabled then this negotiation is
not performed. A change to this attribute will not take effect until Ppp is
restarted (lock/unlock).rw Enumeration .1.3.6.1.4.1.3764.1.1.30.102.3.10.1.2 |
pppLqmOperTableThis group contains the operational attributes for the Ppp Link Quality
Monitor component. SEQUENCE OF PppLqmOperEntry .1.3.6.1.4.1.3764.1.1.30.102.3.11 |
pppLqmOperEntryAn entry in the pppLqmOperTable. PppLqmOperEntry .1.3.6.1.4.1.3764.1.1.30.102.3.11.1 |
pppLqmQualityThis is the current quality of the link as declared by the local Ppp
entity's Link-Quality Management modules. A value of good indicates
that LinkQualityMonitor configStatus is enabled and Link quality is
above Link qualityThreshold. A value of bad indicates that
LinkQualityMonitor configStatus is enabled and Link quality is not
above Link qualityThreshold. A value of notDetermined indicates that
LinkQualityMonitor configStatus is enabled and the quality of the link
has not been calculated yet or LinkQualityMonitor configStatus is
disabled.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.102.3.11.1.1 |
pppLqmInGoodOctetsThis attribute counts the number of good octets received. This counter
will wrap around to 0 when it exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.102.3.11.1.2 |
pppLqmLocalPeriodThis is the Lqm reporting period, in hundredths of a second that is in
effect for the local Ppp entity.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.102.3.11.1.3 |
pppLqmRemotePeriodThis is the Lqm reporting period, in hundredths of a second, that is in
effect for the remote Ppp entity.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.102.3.11.1.4 |
pppLqmOutLqrsThis attribute counts the number of link quality reports sent out. This
counter will wrap around to 0 when it exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.102.3.11.1.5 |
pppLqmInLqrsThis attribute counts the number of link quality reports received. This
counter will wrap around to 0 when it exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.102.3.11.1.6 |
pppNcp OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.102.4 |
pppNcpRowStatusTableThis entry controls the addition and deletion of
pppNcp components. SEQUENCE OF PppNcpRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.102.4.1 |
pppNcpRowStatusEntryA single entry in the table represents a single
pppNcp component. PppNcpRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.102.4.1.1 |
pppNcpRowStatusThis variable is used as the basis for SNMP naming of
pppNcp components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.102.4.1.1.1 |
pppNcpComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.102.4.1.1.2 |
pppNcpStorageTypeThis variable represents the storage type value for the
pppNcp tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.102.4.1.1.4 |
pppNcpIndexThis variable represents the index for the pppNcp tables. NonReplicated .1.3.6.1.4.1.3764.1.1.30.102.4.1.1.10 |
pppNcpBmcEntry OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.102.4.2 |
pppNcpBmcEntryRowStatusTableThis entry controls the addition and deletion of
pppNcpBmcEntry components. SEQUENCE OF PppNcpBmcEntryRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.102.4.2.1 |
pppNcpBmcEntryRowStatusEntryA single entry in the table represents a single
pppNcpBmcEntry component. PppNcpBmcEntryRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.102.4.2.1.1 |
pppNcpBmcEntryRowStatusThis variable is used as the basis for SNMP naming of
pppNcpBmcEntry components.
These components can be added.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.102.4.2.1.1.1 |
pppNcpBmcEntryComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.102.4.2.1.1.2 |
pppNcpBmcEntryStorageTypeThis variable represents the storage type value for the
pppNcpBmcEntry tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.102.4.2.1.1.4 |
pppNcpBmcEntryMacTypeIndexThis variable represents the index for the pppNcpBmcEntry tables. Enumeration .1.3.6.1.4.1.3764.1.1.30.102.4.2.1.1.10 |
pppNcpBmcEntryProvTableThis group contains the attributes for one entry in the
BridgeMediaConfigEntry table. SEQUENCE OF PppNcpBmcEntryProvEntry .1.3.6.1.4.1.3764.1.1.30.102.4.2.10 |
pppNcpBmcEntryProvEntryAn entry in the pppNcpBmcEntryProvTable. PppNcpBmcEntryProvEntry .1.3.6.1.4.1.3764.1.1.30.102.4.2.10.1 |
pppNcpBmcEntryLocalStatusThis attribute indicates whether the local Ppp bridging entity should
accept packets of the protocol type identified by the instance value of
this component. Setting this attribute to accept allows packets of this
protocol type to be accepted. A change to this attribute will not take
effect until Ppp is restarted (lock/unlock).rw Enumeration .1.3.6.1.4.1.3764.1.1.30.102.4.2.10.1.1 |
pppNcpBmEntry OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.102.4.3 |
pppNcpBmEntryRowStatusTable*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This entry controls the addition and deletion of
pppNcpBmEntry components. SEQUENCE OF PppNcpBmEntryRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.102.4.3.1 |
pppNcpBmEntryRowStatusEntryA single entry in the table represents a single
pppNcpBmEntry component. PppNcpBmEntryRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.102.4.3.1.1 |
pppNcpBmEntryRowStatusThis variable is used as the basis for SNMP naming of
pppNcpBmEntry components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.102.4.3.1.1.1 |
pppNcpBmEntryComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.102.4.3.1.1.2 |
pppNcpBmEntryStorageTypeThis variable represents the storage type value for the
pppNcpBmEntry tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.102.4.3.1.1.4 |
pppNcpBmEntryMacTypeIndexThis variable represents the index for the pppNcpBmEntry tables. Enumeration .1.3.6.1.4.1.3764.1.1.30.102.4.3.1.1.10 |
pppNcpBmEntryOperTable*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This group contains the attributes for one entry in the BridgeMediaEntry
table. SEQUENCE OF PppNcpBmEntryOperEntry .1.3.6.1.4.1.3764.1.1.30.102.4.3.10 |
pppNcpBmEntryOperEntryAn entry in the pppNcpBmEntryOperTable. PppNcpBmEntryOperEntry .1.3.6.1.4.1.3764.1.1.30.102.4.3.10.1 |
pppNcpBmEntryLocalStatusThis attribute indicates whether the local Ppp bridging entity will accept
packets of the protocol type identified by the instance value of this
component. A value of accept indicates that packets of this protocol type
will be accepted. A value of dontAccept indicates that packets of this
type will not be accepted.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.102.4.3.10.1.2 |
pppNcpBmEntryRemoteStatusThis attribute indicates whether the remote Ppp bridging entity will
accept packets of the protocol type identified by the instance value of
this component. A value of accept indicates that packets of this protocol
type will be accepted. A value of dontAccept indicates that packets of
this type will not be accepted.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.102.4.3.10.1.3 |
pppNcpBprovTableThis group contains the provisioned attributes for the Bridge Network
Control Protocol. SEQUENCE OF PppNcpBprovEntry .1.3.6.1.4.1.3764.1.1.30.102.4.11 |
pppNcpBprovEntryAn entry in the pppNcpBprovTable. PppNcpBprovEntry .1.3.6.1.4.1.3764.1.1.30.102.4.11.1 |
pppNcpBConfigTinygramIf this attribute is set to disabled then the local Bridge Network Control
Protocol (Bncp) entity will not initiate the tinygram compression option
negotiation. If it is enabled then the local Bncp entity will initiate
negotiation of this option. A change to this attribute will not take effect
until Ppp is restarted (lock/unlock).rw Enumeration .1.3.6.1.4.1.3764.1.1.30.102.4.11.1.1 |
pppNcpBConfigLanIdIf this attribute is set to disabled then the local Bncp entity will not
initiate the lan identification option negotiation. If it is enabled then the
local Bncp entity will initiate negotiation of the option. A change to this
attribute will not take effect until Ppp is restarted (lock/unlock).rw Enumeration .1.3.6.1.4.1.3764.1.1.30.102.4.11.1.4 |
pppNcpIpOperTableThis group contains the Ip Network Control Protocol operational
attributes. SEQUENCE OF PppNcpIpOperEntry .1.3.6.1.4.1.3764.1.1.30.102.4.12 |
pppNcpIpOperEntryAn entry in the pppNcpIpOperTable. PppNcpIpOperEntry .1.3.6.1.4.1.3764.1.1.30.102.4.12.1 |
pppNcpIpOperStateThis is the operational state of the Ip network protocol. For more
information as to the definition of each state see RFC1331 section 5.3.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.102.4.12.1.1 |
pppNcpBoperTableThis group contains the Bridge Network Control Protocol operational
attributes. SEQUENCE OF PppNcpBoperEntry .1.3.6.1.4.1.3764.1.1.30.102.4.14 |
pppNcpBoperEntryAn entry in the pppNcpBoperTable. PppNcpBoperEntry .1.3.6.1.4.1.3764.1.1.30.102.4.14.1 |
pppNcpBOperStateThis is the operational status of the bridge network protocol. For more
information as to the definition of each state see RFC1331 section 5.3.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.102.4.14.1.1 |
pppNcpBLocalToRemoteTinygramCompThis attribute indicates whether the local node will perform tinygram
compression when sending packets to the remote entity. If it is disabled
then the local entity will not perform tinygram compression. If it is
enabled then the local entity will perform tinygram compression.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.102.4.14.1.3 |
pppNcpBRemoteToLocalTinygramCompIf this attribute is disabled then the remote entity is not expected to
perform tinygram compression. If it is enabled then the remote entity is
expected to perform tinygram compression.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.102.4.14.1.4 |
pppNcpBLocalToRemoteLanIdThis attribute indicates whether the local node will include the lan
identification field in transmitted packets or not. If it is disabled then the
local node will not transmit this field, enabled means that the field will
be transmitted.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.102.4.14.1.5 |
pppNcpBRemoteToLocalLanIdThis attribute indicates whether the remote node has indicated that it
will include the lan identification field in transmitted packets or not. If it
is disabled then the field will not be transmitted, if enabled then the field
will be transmitted.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.102.4.14.1.6 |
pppNcpOperTableThis group contains the operational attributes for any Network Control
Protocols other than Ip and Bridge. SEQUENCE OF PppNcpOperEntry .1.3.6.1.4.1.3764.1.1.30.102.4.16 |
pppNcpOperEntryAn entry in the pppNcpOperTable. PppNcpOperEntry .1.3.6.1.4.1.3764.1.1.30.102.4.16.1 |
pppNcpAppletalkOperStateThis is the operational state of the AppleTalk network protocol. For
more information as to the definition of each state see RFC1331 section
5.3.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.102.4.16.1.1 |
pppNcpIpxOperStateThis is the operational state of the Ipx network protocol. For more
information as to the definition of each state see RFC1331 section 5.3.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.102.4.16.1.2 |
pppNcpXnsOperStateThis is the operational state of the Xns network protocol. For more
information as to the definition of each state see RFC1331 section 5.3.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.102.4.16.1.3 |
pppNcpDecnetOperStateThis is the operational state of the DecNet network protocol. For more
information as to the definition of each state see RFC1331 section 5.3.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.102.4.16.1.4 |
pppFramer OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.102.5 |
pppFramerRowStatusTableThis entry controls the addition and deletion of
pppFramer components. SEQUENCE OF PppFramerRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.102.5.1 |
pppFramerRowStatusEntryA single entry in the table represents a single
pppFramer component. PppFramerRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.102.5.1.1 |
pppFramerRowStatusThis variable is used as the basis for SNMP naming of
pppFramer components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.102.5.1.1.1 |
pppFramerComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.102.5.1.1.2 |
pppFramerStorageTypeThis variable represents the storage type value for the
pppFramer tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.102.5.1.1.4 |
pppFramerIndexThis variable represents the index for the pppFramer tables. NonReplicated .1.3.6.1.4.1.3764.1.1.30.102.5.1.1.10 |
pppFramerProvTableThis group contains the base provisioning data for the Framer
component. Application or hardware interface specific provisioning data
is contained in other provisionable Framer groups. SEQUENCE OF PppFramerProvEntry .1.3.6.1.4.1.3764.1.1.30.102.5.10 |
pppFramerProvEntryAn entry in the pppFramerProvTable. PppFramerProvEntry .1.3.6.1.4.1.3764.1.1.30.102.5.10.1 |
pppFramerInterfaceNameThis attribute contains a hardware component name.
The attribute associates the application with a specific link. This defines
the logical processor on which Framer's parent component (as well as
Framer itself) will run.rw Link .1.3.6.1.4.1.3764.1.1.30.102.5.10.1.1 |
pppFramerStateTableThis group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. SEQUENCE OF PppFramerStateEntry .1.3.6.1.4.1.3764.1.1.30.102.5.12 |
pppFramerStateEntryAn entry in the pppFramerStateTable. PppFramerStateEntry .1.3.6.1.4.1.3764.1.1.30.102.5.12.1 |
pppFramerAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.102.5.12.1.1 |
pppFramerOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.102.5.12.1.2 |
pppFramerUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.102.5.12.1.3 |
pppFramerStatsTableThis group contains the operational statistics data for a Framer
component. SEQUENCE OF PppFramerStatsEntry .1.3.6.1.4.1.3764.1.1.30.102.5.13 |
pppFramerStatsEntryAn entry in the pppFramerStatsTable. PppFramerStatsEntry .1.3.6.1.4.1.3764.1.1.30.102.5.13.1 |
pppFramerFrmToIfThis attribute counts the number of frames transmitted to the link
interface by Framer.
Note: This does not include the number of frames transmitted directly to
the hardware queue, thus bypassing the Framer component.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.102.5.13.1.1 |
pppFramerFrmFromIfThis attribute counts the number of frames received from the link
interface by Framer.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.102.5.13.1.2 |
pppFramerAbortsThis attribute counts the total number of aborts received.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.102.5.13.1.3 |
pppFramerCrcErrorsThis attribute counts the total number of frames with CRC errors.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.102.5.13.1.4 |
pppFramerLrcErrorsThis attribute counts the total number of frames with LRC errors.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.102.5.13.1.5 |
pppFramerNonOctetErrorsThis attribute counts the total number of frames that were non octet
aligned.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.102.5.13.1.6 |
pppFramerOverrunsThis attribute counts the total number of frames received from the link
for which overruns occurred.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.102.5.13.1.7 |
pppFramerUnderrunsThis attribute counts the total number of frames transmitted to the link
for which underruns occurred.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.102.5.13.1.8 |
pppFramerLargeFrmErrorsThis attribute counts the total number of frames received which were too
large. The frame execeeded the maximumFrameLengthLimit provisioned
attribute or it contained more than the 255 block hardware limit.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.102.5.13.1.9 |
pppFramerUtilTableThis group contains the link utilizaiton operational data for a Framer
component. SEQUENCE OF PppFramerUtilEntry .1.3.6.1.4.1.3764.1.1.30.102.5.14 |
pppFramerUtilEntryAn entry in the pppFramerUtilTable. PppFramerUtilEntry .1.3.6.1.4.1.3764.1.1.30.102.5.14.1 |
pppFramerNormPrioLinkUtilToIfThis attribute is the utilization of the normal priority data sent to the link
as a percentage of the available bandwidth on the link. The utilization is
the average for the last minute.ro Gauge32 .1.3.6.1.4.1.3764.1.1.30.102.5.14.1.1 |
pppFramerNormPrioLinkUtilFromIfThis attribute is the utilization of the normal priority data received from
the link as a percentage of the available bandwidth on the link. The
utilization is the average for the last minute.ro Gauge32 .1.3.6.1.4.1.3764.1.1.30.102.5.14.1.3 |
pppLeq OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.102.6 |
pppLeqRowStatusTableThis entry controls the addition and deletion of
pppLeq components. SEQUENCE OF PppLeqRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.102.6.1 |
pppLeqRowStatusEntryA single entry in the table represents a single
pppLeq component. PppLeqRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.102.6.1.1 |
pppLeqRowStatusThis variable is used as the basis for SNMP naming of
pppLeq components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.102.6.1.1.1 |
pppLeqComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.102.6.1.1.2 |
pppLeqStorageTypeThis variable represents the storage type value for the
pppLeq tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.102.6.1.1.4 |
pppLeqIndexThis variable represents the index for the pppLeq tables. NonReplicated .1.3.6.1.4.1.3764.1.1.30.102.6.1.1.10 |
pppLeqProvTableThis group contains the provisioned attributes for the
LinkEmissionQueue component. SEQUENCE OF PppLeqProvEntry .1.3.6.1.4.1.3764.1.1.30.102.6.10 |
pppLeqProvEntryAn entry in the pppLeqProvTable. PppLeqProvEntry .1.3.6.1.4.1.3764.1.1.30.102.6.10.1 |
pppLeqMaxPacketsThis attribute specifies the maximum number of packets allowed in the
Leq before being discarded. If this attribute is set to zero then the
maximum number of packets is calculated from the transmit data rate.
This calculated value is placed in queuePktThreshold.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.102.6.10.1.1 |
pppLeqMaxMsecDataThis attribute specifies the maximum number of 'Milliseconds worth of
data' allowed in the Leq before packets are discarded. The
queueByteThreshold will be calculated from this attribute, based on the
transmit data rate.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.102.6.10.1.2 |
pppLeqMaxPercentMulticastThis attribute specifies the maximum percentage of multicast packets
allowed in the Leq, based on queuePktThreshold, before being
discarded. The calculated value will be placed in
queueMulticastThreshold.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.102.6.10.1.3 |
pppLeqTimeToLiveThis attribute specifies the 'Milliseconds Time To Live' of packets in
the Leq. If the timeToLive of a packet expires, it will be discarded.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.102.6.10.1.4 |
pppLeqStatsTableThis group contains Link Emission Queue general statistics. SEQUENCE OF PppLeqStatsEntry .1.3.6.1.4.1.3764.1.1.30.102.6.11 |
pppLeqStatsEntryAn entry in the pppLeqStatsTable. PppLeqStatsEntry .1.3.6.1.4.1.3764.1.1.30.102.6.11.1 |
pppLeqTimedOutPktThis attribute counts the number of packets that have been discarded due
to exceeding the timeToLive. This counter will wrap around to 0 when it
exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.102.6.11.1.1 |
pppLeqHardwareForcedPktThis attribute counts the number of hardware forced packets on this
instance of Ppp. This counter will wrap around to 0 when it exceeds its
maximum count.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.102.6.11.1.2 |
pppLeqForcedPktDiscardsThis attribute counts the total number of hardware forced packets that
had to be discarded due to link failure. This counter will wrap around to
0 when it exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.102.6.11.1.4 |
pppLeqQueuePurgeDiscardsThis attribute counts the total number of packets discarded by a queue
purge (i.e. a discarding of all packets on the queue). This counter will
wrap around to 0 when it exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.102.6.11.1.5 |
pppLeqTStatsTableThis group contains Link Emission Queue total statistics. SEQUENCE OF PppLeqTStatsEntry .1.3.6.1.4.1.3764.1.1.30.102.6.12 |
pppLeqTStatsEntryAn entry in the pppLeqTStatsTable. PppLeqTStatsEntry .1.3.6.1.4.1.3764.1.1.30.102.6.12.1 |
pppLeqTotalPktHandledThis attribute counts the total number of packets handled by the Leq.
This counter will wrap around to 0 when it exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.102.6.12.1.1 |
pppLeqTotalPktForwardedThis attribute counts the total number of packets forwarded by the Leq.
This counter will wrap around to 0 when it exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.102.6.12.1.2 |
pppLeqTotalPktQueuedThis attribute counts the total number of packets that required queuing
by the Leq due to transmit congestion. This counter will wrap around to
0 when it exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.102.6.12.1.3 |
pppLeqTotalMulticastPktThis attribute counts the total number of multicast packets handled by
this instance of Ppp. This counter will wrap around to 0 when it exceeds
its maximum count.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.102.6.12.1.4 |
pppLeqTotalPktDiscardsThis attribute counts the total number of packets that were discarded for
this instance of Ppp. This is the sum of timedOutPkt, forcedPktDiscards,
queuePurgeDiscards, pktThresholdExceeded, byteThresholdExceeded,
mulThresholdExceeded, and memThresholdExceeded. This counter will
wrap around to 0 when it exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.102.6.12.1.8 |
pppLeqCStatsTableThis group contains Link Emission Queue current statistics. SEQUENCE OF PppLeqCStatsEntry .1.3.6.1.4.1.3764.1.1.30.102.6.13 |
pppLeqCStatsEntryAn entry in the pppLeqCStatsTable. PppLeqCStatsEntry .1.3.6.1.4.1.3764.1.1.30.102.6.13.1 |
pppLeqCurrentPktQueuedThis attribute counts the current number of packets queued.ro Gauge32 .1.3.6.1.4.1.3764.1.1.30.102.6.13.1.1 |
pppLeqCurrentBytesQueuedThis attribute counts the current number of bytes queued.ro Gauge32 .1.3.6.1.4.1.3764.1.1.30.102.6.13.1.2 |
pppLeqCurrentMulticastQueuedThis attribute counts the current number of multicast packets in the
queue.ro Gauge32 .1.3.6.1.4.1.3764.1.1.30.102.6.13.1.3 |
pppLeqThrStatsTableThis group contains Link Emission Queue threshold statistics. SEQUENCE OF PppLeqThrStatsEntry .1.3.6.1.4.1.3764.1.1.30.102.6.14 |
pppLeqThrStatsEntryAn entry in the pppLeqThrStatsTable. PppLeqThrStatsEntry .1.3.6.1.4.1.3764.1.1.30.102.6.14.1 |
pppLeqQueuePktThresholdThis attribute is the maximum number of packets that can be contained
in the queue before being discarded. If maxPackets was set to 0 then this
attribute will contain the value that has been calculated based on the
transmit data rate. If maxPackets was set to one or more than this
attribute will contain that number.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.102.6.14.1.1 |
pppLeqPktThresholdExceededThis attribute counts the number of packets discarded due to the
queuePktThreshold being exceeded. This counter will wrap around to 0
when it exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.102.6.14.1.2 |
pppLeqQueueByteThresholdThis attribute is the maximum number of bytes allowed in the queue
based on maxMsecData and the transmit data rate.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.102.6.14.1.3 |
pppLeqByteThresholdExceededThis attribute counts the number of packets discarded due to the
queueByteThreshold being exceeded. This counter will wrap around to 0
when it exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.102.6.14.1.4 |
pppLeqQueueMulticastThresholdThis attribute is the number of multicast packets allowed in the queue
based on maxPercentMulticast and maxPackets.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.102.6.14.1.5 |
pppLeqMulThresholdExceededThis attribute counts the number of packets discarded due to the
queueMulticastThreshold being exceeded. This counter will wrap
around to 0 when it exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.102.6.14.1.6 |
pppLeqMemThresholdExceededThis attribute counts the number of packets discarded due to exceeding
the memory usage threshold for Leq. The memory usage threshold is
determined by the Leq software, guaranteeing that the Leq does not
consume all of the memory. This counter will wrap around to 0 when it
exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.102.6.14.1.7 |
pppCidDataTableThis group contains the attribute for a component's Customer
Identifier (CID). Refer to the attribute description for a detailed
explanation of CIDs. SEQUENCE OF PppCidDataEntry .1.3.6.1.4.1.3764.1.1.30.102.20 |
pppCidDataEntryAn entry in the pppCidDataTable. PppCidDataEntry .1.3.6.1.4.1.3764.1.1.30.102.20.1 |
pppCustomerIdentifierThis attribute holds the Customer Identifier (CID).
Every component has a CID. If a component has a cid attribute, the
component's CID is the provisioned value of that attribute;
otherwise the component inherits the CID of its parent. The top-
level component has a CID of 0.
Every operator session also has a CID, which is the CID
provisioned for the operator's user ID. An operator will see only the
stream data for components having a matching CID. Also, the
operator will be allowed to issue commands for only those
components which have a matching CID.
An operator CID of 0 is used to identify the Network Manager
(referred to as 'NetMan' in DPN). This CID matches the CID of
any component. Values 1 to 8191 inclusive (equivalent to 'basic
CIDs' in DPN) may be assigned to specific customers.rw Unsigned32 (0 | 1..8191) .1.3.6.1.4.1.3764.1.1.30.102.20.1.1 |
pppIfEntryTableThis group contains the provisionable attributes for the ifEntry. SEQUENCE OF PppIfEntryEntry .1.3.6.1.4.1.3764.1.1.30.102.21 |
pppIfEntryEntryAn entry in the pppIfEntryTable. PppIfEntryEntry .1.3.6.1.4.1.3764.1.1.30.102.21.1 |
pppIfAdminStatusThe desired state of the interface. The up state indicates the
interface is operational. The down state indicates the interface is not
operational. The testing state indicates that no operational packets
can be passed.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.102.21.1.1 |
pppIfIndexThis is the index for the IfEntry. Its value is automatically initialized
during the provisioning process.ro InterfaceIndex .1.3.6.1.4.1.3764.1.1.30.102.21.1.2 |
pppMpTableThis group contains the base provisioning data for the Media
Application component. SEQUENCE OF PppMpEntry .1.3.6.1.4.1.3764.1.1.30.102.22 |
pppMpEntryAn entry in the pppMpTable. PppMpEntry .1.3.6.1.4.1.3764.1.1.30.102.22.1 |
pppLinkToProtocolPortThis attribute contains a protocol port component name. The attribute
associates the application with a protocol port.rw Link .1.3.6.1.4.1.3764.1.1.30.102.22.1.1 |
pppStateTableThis group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. SEQUENCE OF PppStateEntry .1.3.6.1.4.1.3764.1.1.30.102.23 |
pppStateEntryAn entry in the pppStateTable. PppStateEntry .1.3.6.1.4.1.3764.1.1.30.102.23.1 |
pppAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.102.23.1.1 |
pppOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.102.23.1.2 |
pppUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.102.23.1.3 |
pppOperStatusTableThis group includes the Operational Status attribute. This attribute
defines the current operational state of this component. SEQUENCE OF PppOperStatusEntry .1.3.6.1.4.1.3764.1.1.30.102.24 |
pppOperStatusEntryAn entry in the pppOperStatusTable. PppOperStatusEntry .1.3.6.1.4.1.3764.1.1.30.102.24.1 |
pppSnmpOperStatusThe current state of the interface. The up state indicates the
interface is operational and capable of forwarding packets. The
down state indicates the interface is not operational, thus unable to
forward packets. testing state indicates that no operational packets
can be passed.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.102.24.1.1 |