Nortel-Magellan-Passport-PorsAtmTrunksMIB
AI MIB Summary
Standard SNMP MIB module defining data structures for Nortel-Magellan-Passport-PorsAtmTrunksMIB.
21
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
21 total| Object Name |
|---|
porsAtmTrunksMIB OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.137 |
IMPORTS Unknown .1.3.6.1.4.1.562.2.4.2.137 |
porsAtmTrunksGroup OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.137.1 |
porsAtmTrunksGroupBE OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.137.1.5 |
porsAtmTrunksGroupBE01 OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.137.1.5.2 |
porsAtmTrunksGroupBE01A OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.137.1.5.2.2 |
porsAtmTrunksCapabilities OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.137.3 |
porsAtmTrunksCapabilitiesBE OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.137.3.5 |
porsAtmTrunksCapabilitiesBE01 OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.137.3.5.2 |
porsAtmTrunksCapabilitiesBE01A OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.137.3.5.2.2 |
trkPaAtm OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.60.4.3 |
trkPaAtmRowStatusTableThis entry controls the addition and deletion of
trkPaAtm components. SEQUENCE OF TrkPaAtmRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.60.4.3.1 |
trkPaAtmRowStatusEntryA single entry in the table represents a single
trkPaAtm component. TrkPaAtmRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.60.4.3.1.1 |
trkPaAtmRowStatusThis variable is used as the basis for SNMP naming of
trkPaAtm components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.60.4.3.1.1.1 |
trkPaAtmComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.60.4.3.1.1.2 |
trkPaAtmStorageTypeThis variable represents the storage type value for the
trkPaAtm tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.60.4.3.1.1.4 |
trkPaAtmIndexThis variable represents the index for the trkPaAtm tables. NonReplicated .1.3.6.1.4.1.3764.1.1.30.60.4.3.1.1.10 |
trkPaAtmProvTableThis group of attributes provides the parameters used by the
AtmAccess component for specifying access to an ATM interface. SEQUENCE OF TrkPaAtmProvEntry .1.3.6.1.4.1.3764.1.1.30.60.4.3.10 |
trkPaAtmProvEntryAn entry in the trkPaAtmProvTable. TrkPaAtmProvEntry .1.3.6.1.4.1.3764.1.1.30.60.4.3.10.1 |
trkPaAtmAtmConnectionThis attribute specifies the component name of the ATM Virtual
Circuit that the AtmAccess component will use. The format of the
component name is AtmIf/n Vcc/x.y Neprw Link .1.3.6.1.4.1.3764.1.1.30.60.4.3.10.1.1 |
trkPaAtmModeThis attribute specifies the operating mode of the PathAdmin. When
set to multiplexing the PathAdmin to multiplex voice calls to the
given atmConnection using single cell per voice packet transport.
All other calls will be multiplexed using AAL5 over the Trunk's
VCC. When set to mapping the PathAdmin will allocate a VCC per
LCh/n. In mapping mode the atmConnection should not be set. The
VCC chosen for a given connection can be seen in the LCh
localConnection attribute.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.60.4.3.10.1.2 |