Nortel-Magellan-Passport-LaneClientMIB
AI MIB Summary
Standard SNMP MIB module defining data structures for Nortel-Magellan-Passport-LaneClientMIB.
116
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
116 total| Object Name |
|---|
laneClientMIB OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.71 |
IMPORTS Unknown .1.3.6.1.4.1.562.2.4.2.71 |
laneClientGroup OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.71.1 |
laneClientGroupBE OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.71.1.5 |
laneClientGroupBE00 OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.71.1.5.1 |
laneClientGroupBE00A OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.71.1.5.1.2 |
laneClientCapabilities OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.71.3 |
laneClientCapabilitiesBE OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.71.3.5 |
laneClientCapabilitiesBE00 OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.71.3.5.1 |
laneClientCapabilitiesBE00A OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.71.3.5.1.2 |
lec OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.124 |
lecRowStatusTableThis entry controls the addition and deletion of
lec components. SEQUENCE OF LecRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.124.1 |
lecRowStatusEntryA single entry in the table represents a single
lec component. LecRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.124.1.1 |
lecRowStatusThis variable is used as the basis for SNMP naming of
lec components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.124.1.1.1 |
lecComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.124.1.1.2 |
lecStorageTypeThis variable represents the storage type value for the
lec tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.124.1.1.4 |
lecIndexThis variable represents the index for the lec tables. Integer32 .1.3.6.1.4.1.3764.1.1.30.124.1.1.10 |
lecLeArp OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.124.2 |
lecLeArpRowStatusTable*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This entry controls the addition and deletion of
lecLeArp components. SEQUENCE OF LecLeArpRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.124.2.1 |
lecLeArpRowStatusEntryA single entry in the table represents a single
lecLeArp component. LecLeArpRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.124.2.1.1 |
lecLeArpRowStatusThis variable is used as the basis for SNMP naming of
lecLeArp components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.124.2.1.1.1 |
lecLeArpComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.124.2.1.1.2 |
lecLeArpStorageTypeThis variable represents the storage type value for the
lecLeArp tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.124.2.1.1.4 |
lecLeArpIndexThis variable represents the index for the lecLeArp tables. DashedHexString .1.3.6.1.4.1.3764.1.1.30.124.2.1.1.10 |
lecLeArpOperTable*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This group contains the operational attributes of the LeArpEntry
component. SEQUENCE OF LecLeArpOperEntry .1.3.6.1.4.1.3764.1.1.30.124.2.10 |
lecLeArpOperEntryAn entry in the lecLeArpOperTable. LecLeArpOperEntry .1.3.6.1.4.1.3764.1.1.30.124.2.10.1 |
lecLeArpAtmAddressThis attribute indicates the ATM address of the BUS or LEC
associated with the MAC address of this entry. If the MAC address
is the all-ones broadcast address, the entry is for the BUS.ro HexString .1.3.6.1.4.1.3764.1.1.30.124.2.10.1.1 |
lecLeArpIsRemoteAddressThis attribute indicates whether this entry is for a local or remote
MAC address. In this context, 'local' means a MAC address that is
local to a LEC, and 'remote' means a MAC address for which the
LEC is proxy.
If yes, the address is believed to be remote, or its local/remote status
is unknown.
If no, the address is believed to be local; that is, registered with the
LES by the LEC whose ATM address is atmAddress.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.124.2.10.1.2 |
lecLeArpConnectionIdThis attribute indicates the connection identifier associated with this
entry. The connection identifier is the instance of the Connection
component.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.124.2.10.1.3 |
lecConn OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.124.3 |
lecConnRowStatusTable*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This entry controls the addition and deletion of
lecConn components. SEQUENCE OF LecConnRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.124.3.1 |
lecConnRowStatusEntryA single entry in the table represents a single
lecConn component. LecConnRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.124.3.1.1 |
lecConnRowStatusThis variable is used as the basis for SNMP naming of
lecConn components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.124.3.1.1.1 |
lecConnComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.124.3.1.1.2 |
lecConnStorageTypeThis variable represents the storage type value for the
lecConn tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.124.3.1.1.4 |
lecConnIndexThis variable represents the index for the lecConn tables. Integer32 .1.3.6.1.4.1.3764.1.1.30.124.3.1.1.10 |
lecConnAtmCon OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.124.3.2 |
lecConnAtmConRowStatusTable*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This entry controls the addition and deletion of
lecConnAtmCon components. SEQUENCE OF LecConnAtmConRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.124.3.2.1 |
lecConnAtmConRowStatusEntryA single entry in the table represents a single
lecConnAtmCon component. LecConnAtmConRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.124.3.2.1.1 |
lecConnAtmConRowStatusThis variable is used as the basis for SNMP naming of
lecConnAtmCon components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.124.3.2.1.1.1 |
lecConnAtmConComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.124.3.2.1.1.2 |
lecConnAtmConStorageTypeThis variable represents the storage type value for the
lecConnAtmCon tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.124.3.2.1.1.4 |
lecConnAtmConIndexThis variable represents the index for the lecConnAtmCon tables. NonReplicated .1.3.6.1.4.1.3764.1.1.30.124.3.2.1.1.10 |
lecConnAtmConOperTable*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This attribute group contains the operational attributes for the
NapAtmConnection component. SEQUENCE OF LecConnAtmConOperEntry .1.3.6.1.4.1.3764.1.1.30.124.3.2.10 |
lecConnAtmConOperEntryAn entry in the lecConnAtmConOperTable. LecConnAtmConOperEntry .1.3.6.1.4.1.3764.1.1.30.124.3.2.10.1 |
lecConnAtmConNextHopThis attribute shows the component name of the AtmIf Vcc Ep or
AtmCon component to which this switched connection is
established.ro RowPointer .1.3.6.1.4.1.3764.1.1.30.124.3.2.10.1.1 |
lecConnOperTable*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This group contains the operational status attributes of the
Connection component. SEQUENCE OF LecConnOperEntry .1.3.6.1.4.1.3764.1.1.30.124.3.10 |
lecConnOperEntryAn entry in the lecConnOperTable. LecConnOperEntry .1.3.6.1.4.1.3764.1.1.30.124.3.10.1 |
lecConnRemoteAtmAddressThis attribute indicates the ATM address of the far end.ro HexString .1.3.6.1.4.1.3764.1.1.30.124.3.10.1.1 |
lecConnAgeThis attribute indicates the age of this connection.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.124.3.10.1.2 |
lecConnTypeThis attribute indicates the type of this connection.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.124.3.10.1.3 |
lecConnStatsTable*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This group contains the statistical attributes of the Connection
component. SEQUENCE OF LecConnStatsEntry .1.3.6.1.4.1.3764.1.1.30.124.3.11 |
lecConnStatsEntryAn entry in the lecConnStatsTable. LecConnStatsEntry .1.3.6.1.4.1.3764.1.1.30.124.3.11.1 |
lecConnOutFramesThis attribute counts the frames sent over this connection. This
counter wraps to zero when the maximum value is reached.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.124.3.11.1.1 |
lecConnInFramesThis attribute counts the frames received over this connection. This
counter wraps to zero when the maximum value is reached.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.124.3.11.1.2 |
lecCidDataTableThis group contains the attribute for a component's Customer
Identifier (CID). Refer to the attribute description for a detailed
explanation of CIDs. SEQUENCE OF LecCidDataEntry .1.3.6.1.4.1.3764.1.1.30.124.10 |
lecCidDataEntryAn entry in the lecCidDataTable. LecCidDataEntry .1.3.6.1.4.1.3764.1.1.30.124.10.1 |
lecCustomerIdentifierThis attribute holds the Customer Identifier (CID).
Every component has a CID. If a component has a cid attribute, the
component's CID is the provisioned value of that attribute;
otherwise the component inherits the CID of its parent. The top-
level component has a CID of 0.
Every operator session also has a CID, which is the CID
provisioned for the operator's user ID. An operator will see only the
stream data for components having a matching CID. Also, the
operator will be allowed to issue commands for only those
components which have a matching CID.
An operator CID of 0 is used to identify the Network Manager
(referred to as 'NetMan' in DPN). This CID matches the CID of
any component. Values 1 to 8191 inclusive (equivalent to 'basic
CIDs' in DPN) may be assigned to specific customers.rw Unsigned32 (0 | 1..8191) .1.3.6.1.4.1.3764.1.1.30.124.10.1.1 |
lecIfEntryTableThis group contains the provisionable attributes for the ifEntry. SEQUENCE OF LecIfEntryEntry .1.3.6.1.4.1.3764.1.1.30.124.11 |
lecIfEntryEntryAn entry in the lecIfEntryTable. LecIfEntryEntry .1.3.6.1.4.1.3764.1.1.30.124.11.1 |
lecIfAdminStatusThe desired state of the interface. The up state indicates the
interface is operational. The down state indicates the interface is not
operational. The testing state indicates that no operational packets
can be passed.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.124.11.1.1 |
lecIfIndexThis is the index for the IfEntry. Its value is automatically initialized
during the provisioning process.ro InterfaceIndex .1.3.6.1.4.1.3764.1.1.30.124.11.1.2 |
lecMpTableThis group contains the base provisioning data for the Media
Application component. SEQUENCE OF LecMpEntry .1.3.6.1.4.1.3764.1.1.30.124.12 |
lecMpEntryAn entry in the lecMpTable. LecMpEntry .1.3.6.1.4.1.3764.1.1.30.124.12.1 |
lecLinkToProtocolPortThis attribute contains a protocol port component name. The attribute
associates the application with a protocol port.rw Link .1.3.6.1.4.1.3764.1.1.30.124.12.1.1 |
lecProvTableThis group contains the provisionable attributes for the
LanEmulationClient component. SEQUENCE OF LecProvEntry .1.3.6.1.4.1.3764.1.1.30.124.13 |
lecProvEntryAn entry in the lecProvTable. LecProvEntry .1.3.6.1.4.1.3764.1.1.30.124.13.1 |
lecLanTypeThis attribute specifies the data frame format for this LEC. Auto-
configuring LECs use this attribute in their Configure requests.
Manually-configured LECs use it in their Join requests. A value of
unspecified implies that the data frame format is obtained from the
LECS or LES.
The value of this attribute may be overridden by the LECS or LES;
actualLanType contains the actual value.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.124.13.1.1 |
lecMaxFrameSizeThis attribute specifies the maximum data frame size for this LEC.
Auto-configuring LECs use this attribute in their Configure
requests. Manually-configured LECs use it in their Join requests. A
value of unspecified may only be used for auto-configuring LECs.
A value of 1580 may only be specified for a LEC that has the
v2Capable attribute set to yes.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.124.13.1.2 |
lecLanNameThis attribute specifies the ELAN name for this LEC. Auto-
configuring LECs use this attribute in their Configure requests.
Manually-configured LECs use it in their Join requests. An empty
string means unspecified.
The value of this attribute may be overridden by the LECS or LES;
actualLanName contains the actual value.rw AsciiString .1.3.6.1.4.1.3764.1.1.30.124.13.1.3 |
lecV2CapableThis attribute specifies whether this LEC exhibits LANE v2
behavior where it differs in its requirements from LANE v1
behavior.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.124.13.1.4 |
lecLecsAddressThis attribute specifies the ATM address of the LECS. If this
attribute is non-null, the LEC attempts to set up a Configuration
Direct SVC to this address as the first step in the LECS Connect
phase. Otherwise, the well known LECS ATM address is used.
Only one of the attributes lecsAddress and lesAddress can be
specified at one time.rw HexString .1.3.6.1.4.1.3764.1.1.30.124.13.1.5 |
lecLesAddressThis attribute specifies the ATM address of the LES. The LEC uses
this address to connect directly to the LES, thus bypassing the
LECS. A LEC which did not use the LECS is deemed to be
manually-configured.
Only one of the attributes lecsAddress and lesAddress can be
specified at one time.rw HexString .1.3.6.1.4.1.3764.1.1.30.124.13.1.6 |
lecMaxDataSvcsThis attribute specifies the maximum number of Data Direct SVCs
which this LEC can have active at any one time. When operating at
the maximum, an SVC setup request releases the oldest 10% of the
Data Direct SVCs of this LEC.
A SET alarm is issued when currDataSvcs rises above 95% of this
value and is CLEAR-ed when it falls below 85%.
Set maxDataSvcs as low as acceptable since a fixed amount of
memory is consumed proportional to this value on every LP with
this feature present.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.124.13.1.7 |
lecMaxArpEntriesThis attribute specifies the maximum number of entries which this
LEC can have in its LE_ARP table at any one time. When operating
at the maximum, if an additional entry must be installed, up to 10%
of the oldest entries are removed.
A SET alarm is issued when currArpEntries rises above 95% of this
value and is CLEAR-ed when it falls below 85%.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.124.13.1.8 |
lecIlsForwarderThis attribute specifies the IlsForwarder that this LEC is using.rw Link .1.3.6.1.4.1.3764.1.1.30.124.13.1.9 |
lecStateTableThis group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. SEQUENCE OF LecStateEntry .1.3.6.1.4.1.3764.1.1.30.124.15 |
lecStateEntryAn entry in the lecStateTable. LecStateEntry .1.3.6.1.4.1.3764.1.1.30.124.15.1 |
lecAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.124.15.1.1 |
lecOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.124.15.1.2 |
lecUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.124.15.1.3 |
lecOperStatusTableThis group includes the Operational Status attribute. This attribute
defines the current operational state of this component. SEQUENCE OF LecOperStatusEntry .1.3.6.1.4.1.3764.1.1.30.124.16 |
lecOperStatusEntryAn entry in the lecOperStatusTable. LecOperStatusEntry .1.3.6.1.4.1.3764.1.1.30.124.16.1 |
lecSnmpOperStatusThe current state of the interface. The up state indicates the
interface is operational and capable of forwarding packets. The
down state indicates the interface is not operational, thus unable to
forward packets. testing state indicates that no operational packets
can be passed.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.124.16.1.1 |
lecOperTableThis group contains the operational status attributes of the
LanEmulationClient component. SEQUENCE OF LecOperEntry .1.3.6.1.4.1.3764.1.1.30.124.17 |
lecOperEntryAn entry in the lecOperTable. LecOperEntry .1.3.6.1.4.1.3764.1.1.30.124.17.1 |
lecActualLanTypeThis attribute indicates the data frame format of this LEC. This may
come from the lanType attribute, LECS or LES. The data frame
format is not unspecified for an operational LEC.
This attribute represents the 'C2' LEC state parameter in the ATM
Forum LANE specification.
Token Ring data frame format is not supported. The LEC does not
become operational if the LECS or LES specify a LAN type of
Token Ring.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.124.17.1.1 |
lecActualMaxFrameSizeThis attribute indicates the maximum data frame size of this LEC.
This may come from the maxFrameSize attribute, LECS or LES.
The value is not unspecified for an operational LEC.
If the LEC's actualV2Capable attribute is no, the value will be
limited to one of 1516, 4544, 9234, 18190.
This attribute represents the 'C3' LEC state parameter in the ATM
Forum LANE specification.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.124.17.1.2 |
lecActualLanNameThis attribute indicates the name of the ELAN to which this LEC is
connected. This may come from the lanName attribute, LECS or
LES. It may be null for an operational LEC.
This attribute represents the 'C5' LEC state parameter in the ATM
Forum LANE specification.ro AsciiString .1.3.6.1.4.1.3764.1.1.30.124.17.1.3 |
lecElanIdThis attribute identifies the ELAN to which this LEC is connected.
For v2, the value will be set in the configuration phase,
otherwise it will be 0.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.124.17.1.4 |
lecActualV2CapableThis attribute indicates whether this LEC exhibits LANE v2
behavior. The value is set in the Join phase.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.124.17.1.5 |
lecConfigurationSourceThis attribute indicates whether this LEC used the LECS, and if so,
the method used to establish the Configuration Direct VCC.
The attribute retains this value when the LEC is reset.
- usedProvisionedLecsAddress: The ATM address specified in
lecsAddress was used to locate the LECS.
- gotLecsAddressViaIlmi: The ATM address of the LECS was
located via the ILMI protocol.
- usedWellKnownLecsAddress: The well-known ATM address
0x47007900000000000000000000-00A03E000001-00 was used to
locate the LECS.
- usedLecsPvc: The well known PVC of VPI=0, VCI=17 was used
to locate the LECS.
- didNotUseLecs: The LECS was bypassed and the ATM address
specified in lesAddress was used to locate the LES.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.124.17.1.6 |
lecActualLecsAddressThis attribute indicates the ATM address of the LECS used to
configure this LEC. The address is null if the LECS was not used.ro HexString .1.3.6.1.4.1.3764.1.1.30.124.17.1.7 |
lecActualLesAddressThis attribute indicates the ATM address of the LES which is
currently serving this LEC. The address is not null for an
operational LEC.
This attribute represents the 'C9' LEC state parameter in the ATM
Forum LANE specification.ro HexString .1.3.6.1.4.1.3764.1.1.30.124.17.1.8 |
lecAtmAddressThis attribute indicates the ATM address of this LEC.
This attribute represents the 'C1' LEC state parameter in the ATM
Forum LANE specification.ro HexString .1.3.6.1.4.1.3764.1.1.30.124.17.1.9 |
lecMacAddressThis attribute indicates the MAC address of this LEC.
This attribute represents the 'C6' LEC state parameter in the ATM
Forum LANE specification.ro MacAddress .1.3.6.1.4.1.3764.1.1.30.124.17.1.10 |
lecLecIdThis attribute indicates the LANE Client Identifier (LECID)
assigned to this LEC by the LES during the Join phase. The LECID
uniquely identifies a LEC on a particular ELAN.
This attribute represents the 'C14' LEC state parameter in the ATM
Forum LANE specification.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.124.17.1.11 |
lecInterfaceStateThis attribute indicates the current state of the LEC. Note that
ifOperStatus is up only when interfaceState is operational.
- initialState: Some parameters (such as addresses and ELAN
name) are known to the LEC.
- lecsConnect: LEC establishes Configuration Direct VCC to
LECS. Manually-configured LECs skip this state.
- configure: LEC discovers LES.
- join: LEC establishes control connections to LES. LEC is
assigned unique LECID and knows all ELAN parameters.
- initialRegistration: LEC may register additional MAC addresses
with LES. This is in addition to the single MAC address registered
during Join phase.
- busConnect: LEC issues LE_ARP to locate the BUS and sets up
the connection. The BUS then establishes the Multicast Forward
VCC to the LEC.
- operational: LEC is operational and can forward data traffic.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.124.17.1.12 |
lecLastFailureResponseCodeThe attribute indicates the status code from the last failed Configure
or Join response. Failed responses are those for which the
LE_CONFIGURE_RESPONSE / LE_JOIN_RESPONSE frame
contains a non-zero code, or fails to arrive within a time-out period.
If none of the LEC's requests have failed, this attribute has the value
none.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.124.17.1.13 |
lecLastFailureStateThis attribute indicates the state that the LEC was in when it
updated the lastFailureResponseCode. If lastFailureResponseCode
is none, this attribute has the value initialState.
See the interfaceState attribute for a description of each state.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.124.17.1.14 |
lecStatsTableThis group contains the statistical attributes of the
LanEmulationClient component. SEQUENCE OF LecStatsEntry .1.3.6.1.4.1.3764.1.1.30.124.18 |
lecStatsEntryAn entry in the lecStatsTable. LecStatsEntry .1.3.6.1.4.1.3764.1.1.30.124.18.1 |
lecArpRequestsOutThis attribute counts the LE_ARP_REQUESTS sent by this LEC.
This counter wraps to zero when the maximum value is reached.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.124.18.1.1 |
lecArpRepliesInThis attribute counts the LE_ARP_RESPONSES received by this
LEC. This counter wraps to zero when the maximum value is
reached.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.124.18.1.2 |
lecArpRequestsInThis attribute counts the LE_ARP_REQUESTS received by this
LEC. This counter wraps to zero when the maximum value is
reached.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.124.18.1.3 |
lecArpRepliesOutThis attribute counts the LE_ARP_RESPONSES sent by this LEC.
This counter wraps to zero when the maximum value is reached.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.124.18.1.4 |
lecControlFramesOutThis attribute counts the control packets sent by this LEC. This
counter wraps to zero when the maximum value is reached.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.124.18.1.5 |
lecControlFramesInThis attribute counts the control packets received by this LEC. This
counter wraps to zero when the maximum value is reached.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.124.18.1.6 |
lecSvcFailuresThis attribute counts the number of SVCs that could not be set up.
The reasons for failure are:
- outgoing SVCs that this LEC failed to establish;
- incoming SVCs that this LEC failed to establish; and
- incoming SVCs that this LEC rejected for protocol or security
reasons.
This counter wraps to zero when the maximum value is reached.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.124.18.1.7 |
lecCurrDataSvcsThis attribute counts the number of Data Direct SVCs that this LEC
has in service.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.124.18.1.8 |
lecPeakDataSvcsThe attribute is the peak value of currDataSvcs. In other words, this
value is the maximum number of Data Direct SVCs that this LEC
had in service at any one time.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.124.18.1.9 |
lecCurrArpEntriesThis attribute counts the current number of entries that this LEC has
in its LE ARP table.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.124.18.1.10 |
lecPeakArpEntriesThe attribute is the peak value currArpEntries. In other words, this
value is the maximum number of entries that this LEC had in its LE
ARP table at any one time.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.124.18.1.11 |
lecBadControlFramesThis attribute counts the control frames discarded by the LEC due
to invalid or illegal frame format, and those frames with a STATUS
code other than 'Success'. This counter wraps to zero when the
maximum value is reached.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.124.18.1.12 |
lecProtocolViolationsThis attribute counts the number of responses received by
the LEC that contained invalid data or non-protocol compliant data.
This counter wraps to zero when the maximum value is reached.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.124.18.1.13 |
lecUnsupportedTlvsThis attribute counts the number of times an unsupported TLV was
received by the LEC in either the Configuration or Join response.
This counter wraps to zero when the maximum value is reached.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.124.18.1.14 |