Nortel-Magellan-Passport-FrameRelayMuxMIB
AI MIB Summary
Standard SNMP MIB module defining data structures for Nortel-Magellan-Passport-FrameRelayMuxMIB.
156
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
156 total| Object Name |
|---|
frameRelayMuxMIB OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.38 |
IMPORTS Unknown .1.3.6.1.4.1.562.2.4.2.38 |
frameRelayMuxGroup OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.38.1 |
frameRelayMuxGroupBE OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.38.1.5 |
frameRelayMuxGroupBE00 OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.38.1.5.1 |
frameRelayMuxGroupBE00A OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.38.1.5.1.2 |
frameRelayMuxCapabilities OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.38.3 |
frameRelayMuxCapabilitiesBE OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.38.3.5 |
frameRelayMuxCapabilitiesBE00 OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.38.3.5.1 |
frameRelayMuxCapabilitiesBE00A OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.38.3.5.1.2 |
frMux OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.112 |
frMuxRowStatusTableThis entry controls the addition and deletion of
frMux components. SEQUENCE OF FrMuxRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.112.1 |
frMuxRowStatusEntryA single entry in the table represents a single
frMux component. FrMuxRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.112.1.1 |
frMuxRowStatusThis variable is used as the basis for SNMP naming of
frMux components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.112.1.1.1 |
frMuxComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.112.1.1.2 |
frMuxStorageTypeThis variable represents the storage type value for the
frMux tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.112.1.1.4 |
frMuxIndexThis variable represents the index for the frMux tables. Integer32 .1.3.6.1.4.1.3764.1.1.30.112.1.1.10 |
frMuxFramer OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.112.2 |
frMuxFramerRowStatusTableThis entry controls the addition and deletion of
frMuxFramer components. SEQUENCE OF FrMuxFramerRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.112.2.1 |
frMuxFramerRowStatusEntryA single entry in the table represents a single
frMuxFramer component. FrMuxFramerRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.112.2.1.1 |
frMuxFramerRowStatusThis variable is used as the basis for SNMP naming of
frMuxFramer components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.112.2.1.1.1 |
frMuxFramerComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.112.2.1.1.2 |
frMuxFramerStorageTypeThis variable represents the storage type value for the
frMuxFramer tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.112.2.1.1.4 |
frMuxFramerIndexThis variable represents the index for the frMuxFramer tables. NonReplicated .1.3.6.1.4.1.3764.1.1.30.112.2.1.1.10 |
frMuxFramerProvTableThis group contains the base provisioning data for the Framer
component. Application or hardware interface specific provisioning
data is contained in other provisionable Framer groups. SEQUENCE OF FrMuxFramerProvEntry .1.3.6.1.4.1.3764.1.1.30.112.2.10 |
frMuxFramerProvEntryAn entry in the frMuxFramerProvTable. FrMuxFramerProvEntry .1.3.6.1.4.1.3764.1.1.30.112.2.10.1 |
frMuxFramerInterfaceNameThis attribute contains a hardware component name.
The attribute associates the application with a specific link. This
defines the module processor on which Framer's parent component
(as well as Framer itself) will run.rw Link .1.3.6.1.4.1.3764.1.1.30.112.2.10.1.1 |
frMuxFramerLinkTableThis group contains attributes defining the framing of data on the
link interface. SEQUENCE OF FrMuxFramerLinkEntry .1.3.6.1.4.1.3764.1.1.30.112.2.11 |
frMuxFramerLinkEntryAn entry in the frMuxFramerLinkTable. FrMuxFramerLinkEntry .1.3.6.1.4.1.3764.1.1.30.112.2.11.1 |
frMuxFramerFlagsBetweenFramesThis attribute defines the number of flags that are inserted between
frames sent to the link interface.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.112.2.11.1.4 |
frMuxFramerStateTableThis group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. SEQUENCE OF FrMuxFramerStateEntry .1.3.6.1.4.1.3764.1.1.30.112.2.12 |
frMuxFramerStateEntryAn entry in the frMuxFramerStateTable. FrMuxFramerStateEntry .1.3.6.1.4.1.3764.1.1.30.112.2.12.1 |
frMuxFramerAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.112.2.12.1.1 |
frMuxFramerOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.112.2.12.1.2 |
frMuxFramerUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.112.2.12.1.3 |
frMuxFramerStatsTableThis group contains the operational statistics data for a Framer
component. SEQUENCE OF FrMuxFramerStatsEntry .1.3.6.1.4.1.3764.1.1.30.112.2.13 |
frMuxFramerStatsEntryAn entry in the frMuxFramerStatsTable. FrMuxFramerStatsEntry .1.3.6.1.4.1.3764.1.1.30.112.2.13.1 |
frMuxFramerFrmToIfThe number of frames transmitted to the link interface by Framer.
Note: This does not include the number of frames transmitted
directly to the hardware queue, thus bypassing the Framer
component.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.112.2.13.1.1 |
frMuxFramerFrmFromIfThe number of frames received from the link interface by Framer.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.112.2.13.1.2 |
frMuxFramerOctetFromIfThe number of bytes received from the link interface by Framer.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.112.2.13.1.3 |
frMuxFramerAbortsThis attribute is the total number of aborts received.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.112.2.13.1.4 |
frMuxFramerCrcErrorsThis attribute is the total number of frames with CRC errors,
occurring in the receive direction from the link.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.112.2.13.1.5 |
frMuxFramerLrcErrorsThis attribute is the total number of frames with LRC errors,
occurring in the Tx link prior to transmission onto the link.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.112.2.13.1.6 |
frMuxFramerNonOctetErrorsThis attribute is the total number of frames that were non octet
aligned.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.112.2.13.1.7 |
frMuxFramerOverrunsThis attribute is the total number of frames received from the link
for which overruns occurred.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.112.2.13.1.8 |
frMuxFramerUnderrunsThis attribute is the total number of frames transmitted to the link
for which underruns occurred.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.112.2.13.1.9 |
frMuxFramerLargeFrmErrorsThis attribute is the total number of frames received which were too
large. The frame execeeded the maximumFrameLengthLimit
provisioned attribute or it contained more than the 255 block
hardware limit.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.112.2.13.1.10 |
frMuxFramerFrmModeErrorsThis attribute is the total number of frames detected with framing
mode errors. A framingModeError is flagged when frames are
inconsistent with the specified framingType, that is when
interrupting frames are used while running in hdlc mode.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.112.2.13.1.11 |
frMuxFramerUtilTableThis group contains the link utilizaiton operational data for a
Framer component. SEQUENCE OF FrMuxFramerUtilEntry .1.3.6.1.4.1.3764.1.1.30.112.2.14 |
frMuxFramerUtilEntryAn entry in the frMuxFramerUtilTable. FrMuxFramerUtilEntry .1.3.6.1.4.1.3764.1.1.30.112.2.14.1 |
frMuxFramerNormPrioLinkUtilToIfThis attribute is the utilization of the normal and high priority data
traffic (interruptable traffic) sent to the link as a percentage of the
available bandwidth on the link. Note that this includes traffic with
Transfer Priorities (TP) of 0, 6 and 9 and/or Emission Priority of 2
and 3. The utilization is the average for the last minute.ro Gauge32 .1.3.6.1.4.1.3764.1.1.30.112.2.14.1.1 |
frMuxFramerNormPrioLinkUtilFromIfThis attribute is the utilization of the normal and high priority data
traffic (interruptable traffic) received from the link as a percentage
of the available bandwidth on the link. Note that this includes traffic
with Transfer Priorities (TP) of 0, 6 and 9 and/or Emission Priority
of 2 and 3. The utilization is the average for the last minute.ro Gauge32 .1.3.6.1.4.1.3764.1.1.30.112.2.14.1.3 |
frMuxLmi OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.112.3 |
frMuxLmiRowStatusTableThis entry controls the addition and deletion of
frMuxLmi components. SEQUENCE OF FrMuxLmiRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.112.3.1 |
frMuxLmiRowStatusEntryA single entry in the table represents a single
frMuxLmi component. FrMuxLmiRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.112.3.1.1 |
frMuxLmiRowStatusThis variable is used as the basis for SNMP naming of
frMuxLmi components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.112.3.1.1.1 |
frMuxLmiComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.112.3.1.1.2 |
frMuxLmiStorageTypeThis variable represents the storage type value for the
frMuxLmi tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.112.3.1.1.4 |
frMuxLmiIndexThis variable represents the index for the frMuxLmi tables. NonReplicated .1.3.6.1.4.1.3764.1.1.30.112.3.1.1.10 |
frMuxLmiProvTableThis group contains the provisionable attributes of the Local
Management Interface component of the FrMux. The Local
Management Interface of the FrMux is always User Side Procedure
of the User Network Interface (USP-UNI). SEQUENCE OF FrMuxLmiProvEntry .1.3.6.1.4.1.3764.1.1.30.112.3.10 |
frMuxLmiProvEntryAn entry in the frMuxLmiProvTable. FrMuxLmiProvEntry .1.3.6.1.4.1.3764.1.1.30.112.3.10.1 |
frMuxLmiProceduresThis attribute selects the procedures to be used for the Local
Management Interface. The following are the supported procedures:
none : No Local Management Interface procedure is active.
vendorForum : Local Management Interface procedure according to
the Vendor Forum specification is active. DLCI 1023 is used for the
LMI protocol.
ansi: Local Management Interface procedure according to the
ANSI specification is active. DLCI 0 is used for the LMI protocol.
ccitt: Local Management Interface procedure according to the
CCITT specification is active. DLCI 0 is used for the LMI protocol.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.112.3.10.1.1 |
frMuxLmiLinkVerificationTimerThis attribute specifies the time interval (in seconds) at which the
FrMux sends Status Enquiry messages to the interface. Exchange of
Status Enquiry and Status Report messages constitutes a polling
cycle, so this attribute may also be interpreted as time interval at
which the FrMux initiates polling cycles. It must be less than
checkPointTimer (t392) configured at the other end of the Frame
Relay interface.
This attribute corresponds to t391 of the ANSI and CCITT
specifications, and nT1 of the Vendor Forum specification.rw Unsigned32 (5 | 10 | 15 | 20 | 25 | 30) .1.3.6.1.4.1.3764.1.1.30.112.3.10.1.2 |
frMuxLmiFullStatusPollingCyclesThis attribute specifies every which polling cycle the FrMux sends a
full STATUS ENQUIRY to the interface. Every
fullStatusPollingCycles polling cycles the FrMux sends a full
STATUS ENQUIRY. In all other cycles of a sequence of
fullStatusPollingCycles polling cycles the FrMux sends a keep alive
STATUS ENQUIRY.
This attribute corresponds to n391 of the ANSI and CCITT
specifications and nN1 of the Vendor Forum specification.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.112.3.10.1.3 |
frMuxLmiErrorEventThresholdThis attribute specifies the number of error events which, if they
occur within eventCount events, will cause a protocol error
condition (protocolStatus = errorCondition). The error condition is
cleared after eventCount sequential correct events occur
(protocolStatus = normalCondition).
An event is one of the following: (1) expiry of the
linkVerificationTimer (t391), (2) reception of a STATUS message.
An error event is one of the following: (1)non-receipt of the
STATUS message in t391 seconds, (2)invalid STATUS message, (3)
invalid sequence number.
This attribute corresponds to n392 of the ANSI and CCITT
specifications and nN2 of the Vendor Forum Specification.
This attribute must be less than or equal to eventCount.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.112.3.10.1.4 |
frMuxLmiEventCountThis attribute specifies the number of contiguous events within
which no more than eventErrorThreshold error events are allowed.
This attribute corresponds to n392 of the ANSI and CCITT
specifications and nN3 of the Vendor Forum Specification.
This attribute must be greater than or equal to errorEventThreshold.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.112.3.10.1.5 |
frMuxLmiStateTableThis group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. SEQUENCE OF FrMuxLmiStateEntry .1.3.6.1.4.1.3764.1.1.30.112.3.11 |
frMuxLmiStateEntryAn entry in the frMuxLmiStateTable. FrMuxLmiStateEntry .1.3.6.1.4.1.3764.1.1.30.112.3.11.1 |
frMuxLmiAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.112.3.11.1.1 |
frMuxLmiOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.112.3.11.1.2 |
frMuxLmiUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.112.3.11.1.3 |
frMuxLmiPsiTableThis group provides the protocol status of the Local Management
Interface of this FrMux. SEQUENCE OF FrMuxLmiPsiEntry .1.3.6.1.4.1.3764.1.1.30.112.3.12 |
frMuxLmiPsiEntryAn entry in the frMuxLmiPsiTable. FrMuxLmiPsiEntry .1.3.6.1.4.1.3764.1.1.30.112.3.12.1 |
frMuxLmiProtocolStatusThis attribute indicates whether the Lmi is in an error condition or
whether the protocol is behaving normally. When operating with no
LMI protocol (procedures = none), this attribute will always be set
to normalCondition. When operating with an LMI protocol
(procedures set to one of venforForum, ansi, ccitt), this attribute is
set to errorCondition when errorEventThreshold of the last
eventCount events are in error.
The error condition is cleared when eventCount consecutive good
events take place.
The consequence of an error condition is that all Dlci's on this
interface become disabled and there is no data flow in either
direction.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.112.3.12.1.1 |
frMuxLmiStatsTableThis group contains the operational statistics for the FrMux Local
Management Interface. SEQUENCE OF FrMuxLmiStatsEntry .1.3.6.1.4.1.3764.1.1.30.112.3.13 |
frMuxLmiStatsEntryAn entry in the frMuxLmiStatsTable. FrMuxLmiStatsEntry .1.3.6.1.4.1.3764.1.1.30.112.3.13.1 |
frMuxLmiKeepAliveStatusEnqToIfThis attribute counts the number of keep alive STATUS ENQUIRY
messages sent to the interface. When the maximum count is reached
it wraps to zero.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.112.3.13.1.1 |
frMuxLmiFullStatusEnqToIfThis attribute counts the number of full STATUS ENQUIRY
messages sent to the interface. When the maximum count is reached
it wraps to zero.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.112.3.13.1.2 |
frMuxLmiProtocolErrorsThis attribute counts the number of Local Management Interface
protocol errors. Protocol errors include (1) protocol message format
errors, (2) protocol timer expiry errors, and (3) sequence errors.
When the maximum count is reached it wraps to zero.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.112.3.13.1.3 |
frMuxLmiUnexpectedIesThis attribute counts the number of frames received with an
Information Element identifier that is unknown or unexpected.
When the maximum count is reached, this counter wraps to zero.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.112.3.13.1.4 |
frMuxLmiSequenceErrorsThis attribute counts the number of Local Management Interface
sequence errors. A sequence error is receipt of an LMI message
with a receive sequence number not equal to the last send sequence
number. When the maximum count is reached the counter wraps to
zero.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.112.3.13.1.5 |
frMuxLmiUnexpectedReportsThis attribute counts the number of frames received on the Local
Management Interface with an unknown or unexpected report type.
When the maximum count is reached the counter wraps to zero.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.112.3.13.1.6 |
frMuxLmiNoStatusReportCountThis attribute counts the number of times when no status report or
an invalid status report comes from the external network. This
attribute is incremented in two cases:
i) after a status enquiry is sent out and t391 timer expires without
having a status report received.
ii) an invalid status report is received.
When the maximum count is reached it wraps to zero.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.112.3.13.1.7 |
frMuxDlci OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.112.4 |
frMuxDlciRowStatusTableThis entry controls the addition and deletion of
frMuxDlci components. SEQUENCE OF FrMuxDlciRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.112.4.1 |
frMuxDlciRowStatusEntryA single entry in the table represents a single
frMuxDlci component. FrMuxDlciRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.112.4.1.1 |
frMuxDlciRowStatusThis variable is used as the basis for SNMP naming of
frMuxDlci components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.112.4.1.1.1 |
frMuxDlciComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.112.4.1.1.2 |
frMuxDlciStorageTypeThis variable represents the storage type value for the
frMuxDlci tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.112.4.1.1.4 |
frMuxDlciIndexThis variable represents the index for the frMuxDlci tables. Integer32 .1.3.6.1.4.1.3764.1.1.30.112.4.1.1.10 |
frMuxDlciApplInfo OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.112.4.2 |
frMuxDlciApplInfoRowStatusTableThis entry controls the addition and deletion of
frMuxDlciApplInfo components. SEQUENCE OF FrMuxDlciApplInfoRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.112.4.2.1 |
frMuxDlciApplInfoRowStatusEntryA single entry in the table represents a single
frMuxDlciApplInfo component. FrMuxDlciApplInfoRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.112.4.2.1.1 |
frMuxDlciApplInfoRowStatusThis variable is used as the basis for SNMP naming of
frMuxDlciApplInfo components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.112.4.2.1.1.1 |
frMuxDlciApplInfoComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.112.4.2.1.1.2 |
frMuxDlciApplInfoStorageTypeThis variable represents the storage type value for the
frMuxDlciApplInfo tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.112.4.2.1.1.4 |
frMuxDlciApplInfoIndexThis variable represents the index for the frMuxDlciApplInfo tables. NonReplicated .1.3.6.1.4.1.3764.1.1.30.112.4.2.1.1.10 |
frMuxDlciApplInfoProvTableThis group contains provisionable attributes of this Dlci. SEQUENCE OF FrMuxDlciApplInfoProvEntry .1.3.6.1.4.1.3764.1.1.30.112.4.2.11 |
frMuxDlciApplInfoProvEntryAn entry in the frMuxDlciApplInfoProvTable. FrMuxDlciApplInfoProvEntry .1.3.6.1.4.1.3764.1.1.30.112.4.2.11.1 |
frMuxDlciApplInfoApplicationNameThis attribute is the link to the application associated with this Dlci.rw Link .1.3.6.1.4.1.3764.1.1.30.112.4.2.11.1.1 |
frMuxDlciOperTableThis group contains the name of the application associated with this
Dlci. SEQUENCE OF FrMuxDlciOperEntry .1.3.6.1.4.1.3764.1.1.30.112.4.10 |
frMuxDlciOperEntryAn entry in the frMuxDlciOperTable. FrMuxDlciOperEntry .1.3.6.1.4.1.3764.1.1.30.112.4.10.1 |
frMuxDlciApplicationNameThis attribute contains the name of the application associated with
this Dlci.ro RowPointer .1.3.6.1.4.1.3764.1.1.30.112.4.10.1.1 |
frMuxDlciStateTableThis group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. SEQUENCE OF FrMuxDlciStateEntry .1.3.6.1.4.1.3764.1.1.30.112.4.11 |
frMuxDlciStateEntryAn entry in the frMuxDlciStateTable. FrMuxDlciStateEntry .1.3.6.1.4.1.3764.1.1.30.112.4.11.1 |
frMuxDlciAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.112.4.11.1.1 |
frMuxDlciOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.112.4.11.1.2 |
frMuxDlciUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.112.4.11.1.3 |
frMuxDlciAbitTableThis group contains the A-Bit status information for this Dlci. SEQUENCE OF FrMuxDlciAbitEntry .1.3.6.1.4.1.3764.1.1.30.112.4.12 |
frMuxDlciAbitEntryAn entry in the frMuxDlciAbitTable. FrMuxDlciAbitEntry .1.3.6.1.4.1.3764.1.1.30.112.4.12.1 |
frMuxDlciABitStatusFromIfThis attribute is the most recent A-Bit status received from the
interface.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.112.4.12.1.1 |
frMuxDlciStatsTableThis group contains the operational statistics for the FrMux Dlci. SEQUENCE OF FrMuxDlciStatsEntry .1.3.6.1.4.1.3764.1.1.30.112.4.13 |
frMuxDlciStatsEntryAn entry in the frMuxDlciStatsTable. FrMuxDlciStatsEntry .1.3.6.1.4.1.3764.1.1.30.112.4.13.1 |
frMuxDlciFrmToIfThis attribute counts the frames sent to the interface. When the
maximum count is reached the count wraps to zero.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.112.4.13.1.1 |
frMuxDlciBytesToIfThis attribute counts the bytes sent to the interface. When the
maximum count is reached the count wraps to zero.ro PassportCounter64 .1.3.6.1.4.1.3764.1.1.30.112.4.13.1.2 |
frMuxDlciFrmFromIfThis attribute counts the frames received from the interface. Frames
that are discarded are not included in this count. When the
maximum count is reached the count wraps to zero.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.112.4.13.1.3 |
frMuxDlciDeFrmFromIfThis attribute counts the frames received from the interface with the
Discard Eligibility (DE) bit set. When the count reaches maximum
it wraps to zero.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.112.4.13.1.4 |
frMuxDlciBytesFromIfThis attribute counts the bytes received from the interface. Frames
that are discarded are not included in this count. When the
maximum count is reached the count wraps to zero.ro PassportCounter64 .1.3.6.1.4.1.3764.1.1.30.112.4.13.1.5 |
frMuxDlciDeBytesFromIfThis attribute counts the bytes received from the interface with the
Discard Eligibility (DE) bit set. When the count reaches maximum
it wraps to zero.ro PassportCounter64 .1.3.6.1.4.1.3764.1.1.30.112.4.13.1.6 |
frMuxDlciFecnFrmToIfThis attribute counts the frames sent to the interface with the
Forward Explicit Congestion Notification (FECN) bit set. When the
count reaches maximum it wraps to zero.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.112.4.13.1.7 |
frMuxDlciFecnFrmFromIfThis attribute counts the frames received from the interface with the
Forward Explicit Congestion Notification (FECN) bit set. When the
count reaches maximum it wraps to zero.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.112.4.13.1.8 |
frMuxDlciBecnFrmToIfThis attribute counts the frames sent to the interface with the
Backward Explicit Congestion Notification (BECN) bit set. When
the count reaches maximum it wraps to zero.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.112.4.13.1.9 |
frMuxDlciBecnFrmFromIfThis attribute counts the frames received from the interface with the
Backward Explicit Congestion Notification (BECN) bit set. When
the count reaches maximum it wraps to zero.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.112.4.13.1.10 |
frMuxDlciDiscCongestedFromIfThis attribute counts the number of frames discarded in the receive
direction due to local congestion. When this count reaches
maximum, it wraps to zero.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.112.4.13.1.11 |
frMuxDlciDiscCongestedFromIfBytesThis attribute counts the number of bytes discarded in the receive
direction due to local congestion. When this count reaches
maximum, it wraps to zero.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.112.4.13.1.12 |
frMuxDlciDiscDeCongestedFromIfThis attribute counts the number of discard eligible (DE=1) frames
discarded in the receive direction due to local congestion. When this
count reaches maximum, it wraps to zero.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.112.4.13.1.13 |
frMuxDlciDiscDeCongestedFromIfBytesThis attribute counts the number of bytes of discard eligible (DE=1)
traffic discarded in the receive direction due to local congestion.
When the maximum count is reached the count wraps to zero.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.112.4.13.1.14 |
frMuxDlciErrorShortFrmFromIfThis attribute counts the frames received with 0 octets in the
information field. When the count reaches maximum it wraps to
zero.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.112.4.13.1.15 |
frMuxDlciErrorLongFrmFromIfThis attribute counts the frames received with number of octets in
the information field greater than the maximum frame size
provisioned in the component pointed to by the applicationName.
When the count reaches maximum it wraps to zero. Frames whose
lengths are greater than the hardware receive buffer are discarded by
the Framer and are therefore not included in this count.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.112.4.13.1.16 |
frMuxOperStatusTableThis group includes the Operational Status attribute. This attribute
defines the current operational state of this component. SEQUENCE OF FrMuxOperStatusEntry .1.3.6.1.4.1.3764.1.1.30.112.8 |
frMuxOperStatusEntryAn entry in the frMuxOperStatusTable. FrMuxOperStatusEntry .1.3.6.1.4.1.3764.1.1.30.112.8.1 |
frMuxSnmpOperStatusThe current state of the interface. The up state indicates the
interface is operational and capable of forwarding packets. The
down state indicates the interface is not operational, thus unable to
forward packets. testing state indicates that no operational packets
can be passed.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.112.8.1.1 |
frMuxIfEntryTableThis group contains the provisionable attributes for the ifEntry. SEQUENCE OF FrMuxIfEntryEntry .1.3.6.1.4.1.3764.1.1.30.112.9 |
frMuxIfEntryEntryAn entry in the frMuxIfEntryTable. FrMuxIfEntryEntry .1.3.6.1.4.1.3764.1.1.30.112.9.1 |
frMuxIfAdminStatusThe desired state of the interface. The up state indicates the
interface is operational. The down state indicates the interface is not
operational. The testing state indicates that no operational packets
can be passed.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.112.9.1.1 |
frMuxIfIndexThis is the index for the IfEntry. Its value is automatically initialized
during the provisioning process.ro InterfaceIndex .1.3.6.1.4.1.3764.1.1.30.112.9.1.2 |
frMuxCidDataTableThis group contains the attribute for a component's Customer
Identifier (CID). Refer to the attribute description for a detailed
explanation of CIDs. SEQUENCE OF FrMuxCidDataEntry .1.3.6.1.4.1.3764.1.1.30.112.10 |
frMuxCidDataEntryAn entry in the frMuxCidDataTable. FrMuxCidDataEntry .1.3.6.1.4.1.3764.1.1.30.112.10.1 |
frMuxCustomerIdentifierThis attribute holds the Customer Identifier (CID).
Every component has a CID. If a component has a cid attribute, the
component's CID is the provisioned value of that attribute;
otherwise the component inherits the CID of its parent. The top-
level component has a CID of 0.
Every operator session also has a CID, which is the CID
provisioned for the operator's user ID. An operator will see only the
stream data for components having a matching CID. Also, the
operator will be allowed to issue commands for only those
components which have a matching CID.
An operator CID of 0 is used to identify the Network Manager
(referred to as 'NetMan' in DPN). This CID matches the CID of
any component. Values 1 to 8191 inclusive (equivalent to 'basic
CIDs' in DPN) may be assigned to specific customers.rw Unsigned32 (0 | 1..8191) .1.3.6.1.4.1.3764.1.1.30.112.10.1.1 |
frMuxStateTableThis group contains the three OSI State attributes and the six OSI
Status attributes. The descriptions generically indicate what each
attribute implies about the component. Note that not all the values
and state combinations described here are supported by every
component which uses this group. For component-specific
information and the valid state combinations, refer to NTP 241-
7001-150, Passport Operations and Maintenance Guide. SEQUENCE OF FrMuxStateEntry .1.3.6.1.4.1.3764.1.1.30.112.11 |
frMuxStateEntryAn entry in the frMuxStateTable. FrMuxStateEntry .1.3.6.1.4.1.3764.1.1.30.112.11.1 |
frMuxAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.112.11.1.1 |
frMuxOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.112.11.1.2 |
frMuxUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.112.11.1.3 |
frMuxAvailabilityStatusIf supported by the component, this attribute indicates the OSI
Availability status of the component. Note that, even though it is
defined as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value inTest indicates that the resource is undergoing a test
procedure. If adminState is locked or shuttingDown, the normal
users are precluded from using the resource and controlStatus is
reservedForTest. Tests that do not exclude additional users can be
present in any operational or administrative state but the
reservedForTest condition should not be present.
The value failed indicates that the component has an internal fault
that prevents it from operating. The operationalState is disabled.
The value dependency indicates that the component cannot operate
because some other resource on which it depends is unavailable.
The operationalState is disabled.
The value powerOff indicates the resource requires power to be
applied and it is not powered on. The operationalState is disabled.
The value offLine indicates the resource requires a routine
operation (either manual, automatic, or both) to be performed to
place it on-line and make it available for use. The operationalState
is disabled.
The value offDuty indicates the resource is inactive in accordance
with a predetermined time schedule. In the absence of other
disabling conditions, the operationalState is enabled or disabled.
The value degraded indicates the service provided by the
component is degraded in some way, such as in speed or operating
capacity. However, the resource remains available for service. The
operationalState is enabled.
The value notInstalled indicates the resource is not present. The
operationalState is disabled.
The value logFull is not used.
Description of bits:
inTest(0)
failed(1)
powerOff(2)
offLine(3)
offDuty(4)
dependency(5)
degraded(6)
notInstalled(7)
logFull(8)ro OCTET STRING .1.3.6.1.4.1.3764.1.1.30.112.11.1.4 |
frMuxProceduralStatusIf supported by the component, this attribute indicates the OSI
Procedural status of the component. Note that, even though it is
defined as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value initializationRequired indicates (for a resource which
doesn't initialize autonomously) that initialization is required before
it can perform its normal functions, and this procedure has not been
initiated. The operationalState is disabled.
The value notInitialized indicates (for a resource which does
initialize autonomously) that initialization is required before it can
perform its normal functions, and this procedure has not been
initiated. The operationalState may be enabled or disabled.
The value initializing indicates that initialization has been initiated
but is not yet complete. The operationalState may be enabled or
disabled.
The value reporting indicates the resource has completed some
processing operation and is notifying the results. The
operationalState is enabled.
The value terminating indicates the component is in a termination
phase. If the resource doesn't reinitialize autonomously,
operationalState is disabled; otherwise it is enabled or disabled.
Description of bits:
initializationRequired(0)
notInitialized(1)
initializing(2)
reporting(3)
terminating(4)ro OCTET STRING .1.3.6.1.4.1.3764.1.1.30.112.11.1.5 |
frMuxControlStatusIf supported by the component, this attribute indicates the OSI
Control status of the component. Note that, even though it is defined
as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value subjectToTest indicates the resource is available but tests
may be conducted simultaneously at unpredictable times, which
may cause it to exhibit unusual characteristics.
The value partOfServicesLocked indicates that part of the service is
restricted from users of a resource. The adminState is unlocked.
The value reservedForTest indicates that the component is
administratively unavailable because it is undergoing a test
procedure. The adminState is locked.
The value suspended indicates that the service has been
administratively suspended.
Description of bits:
subjectToTest(0)
partOfServicesLocked(1)
reservedForTest(2)
suspended(3)ro OCTET STRING .1.3.6.1.4.1.3764.1.1.30.112.11.1.6 |
frMuxAlarmStatusIf supported by the component, this attribute indicates the OSI
Alarm status of the component. Note that, even though it is defined
as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value underRepair indicates the component is currently being
repaired. The operationalState is enabled or disabled.
The value critical indicates one or more critical alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value major indicates one or more major alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value minor indicates one or more minor alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value alarmOutstanding generically indicates that an alarm of
some severity is outstanding against the component.
Description of bits:
underRepair(0)
critical(1)
major(2)
minor(3)
alarmOutstanding(4)ro OCTET STRING .1.3.6.1.4.1.3764.1.1.30.112.11.1.7 |
frMuxStandbyStatusIf supported by the component, this attribute indicates the OSI
Standby status of the component.
The value notSet indicates that either the attribute is not supported
or that none of the status conditions described below are present.
Note that this is a non-standard value, used because the original
specification indicated this attribute was set-valued and thus, did not
provide a value to indicate that none of the other three are
applicable.
The value hotStandby indicates that the resource is not providing
service but will be immediately able to take over the role of the
resource to be backed up, without initialization activity, and
containing the same information as the resource to be backed up.
The value coldStandby indicates the resource is a backup for
another resource but will not be immediately able to take over the
role of the backed up resource and will require some initialization
activity.
The value providingService indicates that this component, as a
backup resource, is currently backing up another resource.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.112.11.1.8 |
frMuxUnknownStatusThis attribute indicates the OSI Unknown status of the component.
The value false indicates that all of the other OSI State and Status
attribute values can be considered accurate.
The value true indicates that the actual state of the component is not
known for sure.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.112.11.1.9 |
frMuxStatsTableThis group contains the statistics about the operational behavior of
the FrMux at the interface level. SEQUENCE OF FrMuxStatsEntry .1.3.6.1.4.1.3764.1.1.30.112.12 |
frMuxStatsEntryAn entry in the frMuxStatsTable. FrMuxStatsEntry .1.3.6.1.4.1.3764.1.1.30.112.12.1 |
frMuxLastUnknownDlciThis attribute identifies the most recent DLCI which user frames
were received on, for which a Dlci has not been provisioned on the
interface.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.112.12.1.1 |
frMuxUnknownDlciFramesFromIfThis attribute counts frames received from the interface with an
unknown DLCI (Dlci which is not provisioned). When the
maximum is reached the count wraps to zero.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.112.12.1.2 |
frMuxInvalidHeaderFramesFromIfThis attribute counts the number of frames received from the
interface with an invalid header format. When the maximum is
reached the count wraps to zero.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.112.12.1.3 |
frMuxTimeFramerCongestedThis attribute accumulates the time (in msec) during which Framer
congestion has been observed in the direction towards the interface.
The overload causing this statistic to increase may be caused by
oversubscription. When this count reaches maximum, it wraps to
zero.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.112.12.1.4 |