Nortel-Magellan-Passport-FrameRelayDteMIB
AI MIB Summary
Standard SNMP MIB module defining data structures for Nortel-Magellan-Passport-FrameRelayDteMIB.
319
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
319 total| Object Name |
|---|
frameRelayDteMIB OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.32 |
IMPORTS Unknown .1.3.6.1.4.1.562.2.4.2.32 |
frameRelayDteGroup OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.32.1 |
frameRelayDteGroupBE OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.32.1.5 |
frameRelayDteGroupBE00 OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.32.1.5.1 |
frameRelayDteGroupBE00A OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.32.1.5.1.2 |
frameRelayDteCapabilities OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.32.3 |
frameRelayDteCapabilitiesBE OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.32.3.5 |
frameRelayDteCapabilitiesBE00 OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.32.3.5.1 |
frameRelayDteCapabilitiesBE00A OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.32.3.5.1.2 |
frDte OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.101 |
frDteRowStatusTableThis entry controls the addition and deletion of
frDte components. SEQUENCE OF FrDteRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.101.1 |
frDteRowStatusEntryA single entry in the table represents a single
frDte component. FrDteRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.101.1.1 |
frDteRowStatusThis variable is used as the basis for SNMP naming of
frDte components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.101.1.1.1 |
frDteComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.101.1.1.2 |
frDteStorageTypeThis variable represents the storage type value for the
frDte tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.101.1.1.4 |
frDteIndexThis variable represents the index for the frDte tables. Integer32 .1.3.6.1.4.1.3764.1.1.30.101.1.1.10 |
frDteFramer OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.101.2 |
frDteFramerRowStatusTableThis entry controls the addition and deletion of
frDteFramer components. SEQUENCE OF FrDteFramerRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.101.2.1 |
frDteFramerRowStatusEntryA single entry in the table represents a single
frDteFramer component. FrDteFramerRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.101.2.1.1 |
frDteFramerRowStatusThis variable is used as the basis for SNMP naming of
frDteFramer components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.101.2.1.1.1 |
frDteFramerComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.101.2.1.1.2 |
frDteFramerStorageTypeThis variable represents the storage type value for the
frDteFramer tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.101.2.1.1.4 |
frDteFramerIndexThis variable represents the index for the frDteFramer tables. NonReplicated .1.3.6.1.4.1.3764.1.1.30.101.2.1.1.10 |
frDteFramerProvTableThis group contains the base provisioning data for the Framer
component. Application or hardware interface specific provisioning data
is contained in other provisional Framer groups. SEQUENCE OF FrDteFramerProvEntry .1.3.6.1.4.1.3764.1.1.30.101.2.10 |
frDteFramerProvEntryAn entry in the frDteFramerProvTable. FrDteFramerProvEntry .1.3.6.1.4.1.3764.1.1.30.101.2.10.1 |
frDteFramerInterfaceNameThis attribute contains a hardware component name.
The attribute associates the application with a specific link. This defines
the module processor on which Framer's parent component (as well as
Framer itself) will run.rw Link .1.3.6.1.4.1.3764.1.1.30.101.2.10.1.1 |
frDteFramerStateTableThis group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. SEQUENCE OF FrDteFramerStateEntry .1.3.6.1.4.1.3764.1.1.30.101.2.12 |
frDteFramerStateEntryAn entry in the frDteFramerStateTable. FrDteFramerStateEntry .1.3.6.1.4.1.3764.1.1.30.101.2.12.1 |
frDteFramerAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.101.2.12.1.1 |
frDteFramerOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.101.2.12.1.2 |
frDteFramerUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.101.2.12.1.3 |
frDteFramerStatsTableThis group contains the operational statistics data for a Framer
component. SEQUENCE OF FrDteFramerStatsEntry .1.3.6.1.4.1.3764.1.1.30.101.2.13 |
frDteFramerStatsEntryAn entry in the frDteFramerStatsTable. FrDteFramerStatsEntry .1.3.6.1.4.1.3764.1.1.30.101.2.13.1 |
frDteFramerFrmToIfThis attribute counts the number of frames transmitted to the link
interface by Framer.
Note: This does not include the number of frames transmitted directly to
the hardware queue, thus bypassing the Framer component.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.101.2.13.1.1 |
frDteFramerFrmFromIfThis attribute counts the number of frames received from the link
interface by Framer.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.101.2.13.1.2 |
frDteFramerAbortsThis attribute counts the total number of aborts received.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.101.2.13.1.3 |
frDteFramerCrcErrorsThis attribute counts the total number of frames with CRC errors.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.101.2.13.1.4 |
frDteFramerLrcErrorsThis attribute counts the total number of frames with LRC errors.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.101.2.13.1.5 |
frDteFramerNonOctetErrorsThis attribute counts the total number of frames that were non octet
aligned.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.101.2.13.1.6 |
frDteFramerOverrunsThis attribute counts the total number of frames received from the link
for which overruns occurred.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.101.2.13.1.7 |
frDteFramerUnderrunsThis attribute counts the total number of frames transmitted to the link
for which underruns occurred.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.101.2.13.1.8 |
frDteFramerLargeFrmErrorsThis attribute counts the total number of frames received which were too
large. The frame exceeded the maximumFrameLengthLimit
provisioned attribute or it contained more than the 255 block hardware
limit.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.101.2.13.1.9 |
frDteFramerUtilTableThis group contains the link utilization operational data for a Framer
component. SEQUENCE OF FrDteFramerUtilEntry .1.3.6.1.4.1.3764.1.1.30.101.2.14 |
frDteFramerUtilEntryAn entry in the frDteFramerUtilTable. FrDteFramerUtilEntry .1.3.6.1.4.1.3764.1.1.30.101.2.14.1 |
frDteFramerNormPrioLinkUtilToIfThis attribute is the utilization of the normal priority data sent to the link
as a percentage of the available bandwidth on the link. The utilization is
the average for the last minute.ro Gauge32 .1.3.6.1.4.1.3764.1.1.30.101.2.14.1.1 |
frDteFramerNormPrioLinkUtilFromIfThis attribute is the utilization of the normal priority data received from
the link as a percentage of the available bandwidth on the link. The
utilization is the average for the last minute.ro Gauge32 .1.3.6.1.4.1.3764.1.1.30.101.2.14.1.3 |
frDteLmi OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.101.3 |
frDteLmiRowStatusTableThis entry controls the addition and deletion of
frDteLmi components. SEQUENCE OF FrDteLmiRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.101.3.1 |
frDteLmiRowStatusEntryA single entry in the table represents a single
frDteLmi component. FrDteLmiRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.101.3.1.1 |
frDteLmiRowStatusThis variable is used as the basis for SNMP naming of
frDteLmi components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.101.3.1.1.1 |
frDteLmiComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.101.3.1.1.2 |
frDteLmiStorageTypeThis variable represents the storage type value for the
frDteLmi tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.101.3.1.1.4 |
frDteLmiIndexThis variable represents the index for the frDteLmi tables. NonReplicated .1.3.6.1.4.1.3764.1.1.30.101.3.1.1.10 |
frDteLmiProvTableThis group contains the provisioned attributes for the Lmi component. SEQUENCE OF FrDteLmiProvEntry .1.3.6.1.4.1.3764.1.1.30.101.3.10 |
frDteLmiProvEntryAn entry in the frDteLmiProvTable. FrDteLmiProvEntry .1.3.6.1.4.1.3764.1.1.30.101.3.10.1 |
frDteLmiProceduresThis attribute selects the Local Management Interface (LMI) protocol to
be used on the interface. This attribute is equivalent to the SNMP
variable frDlcmiState. The vendorForum LMI protocol automatically
implies that the DLCI used by the protocol is 1023. The ansi (T1.617
Annex D) and itu (ITU-T Recommendation Q.933 Annex A) LMI
protocols use DLCI 0. If none is selected, no LMI procedures will run
on the interface. Note that the ITU-T Recommendation Q.933 was
previously a CCITT recommendation.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.101.3.10.1.1 |
frDteLmiPollingIntervalThis is the number of seconds between successive status enquiry
messages. This field corresponds to the parameter T391 described in the
ANSI T1.617-1991 Annex D.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.101.3.10.1.4 |
frDteLmiFullEnquiryIntervalThe count of status polls before a full status enquiry message is issued.
Every nth poll will request a full status. This field corresponds to the
parameter N391 described in the ANSI T1.617-1991 Annex D.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.101.3.10.1.5 |
frDteLmiErrorThresholdThe number of errors detected within the monitored events window
before declaring the link non-functional. This field corresponds to the
parameter N392 described in the ANSI T1.617-1991 Annex D.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.101.3.10.1.6 |
frDteLmiMonitoredEventsThe number of status polling intervals over which the errorthreshold is
counted This is used to determine if the errorThreshold is exceeded.
This field corresponds to the parameter N393 described in the ANSI
T1.617-1991 Annex D.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.101.3.10.1.7 |
frDteLmiOperTableThis group contains the operational attributes for the Lmi component. SEQUENCE OF FrDteLmiOperEntry .1.3.6.1.4.1.3764.1.1.30.101.3.11 |
frDteLmiOperEntryAn entry in the frDteLmiOperTable. FrDteLmiOperEntry .1.3.6.1.4.1.3764.1.1.30.101.3.11.1 |
frDteLmiLmiStatusThis indicates the status of the Frame Relay interface as determined by
the performance of the link management interface (LMI). If no LMI is
running, lmiStatus will stay in the running state indefinitely.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.101.3.11.1.2 |
frDteRg OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.101.4 |
frDteRgRowStatusTableThis entry controls the addition and deletion of
frDteRg components. SEQUENCE OF FrDteRgRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.101.4.1 |
frDteRgRowStatusEntryA single entry in the table represents a single
frDteRg component. FrDteRgRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.101.4.1.1 |
frDteRgRowStatusThis variable is used as the basis for SNMP naming of
frDteRg components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.101.4.1.1.1 |
frDteRgComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.101.4.1.1.2 |
frDteRgStorageTypeThis variable represents the storage type value for the
frDteRg tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.101.4.1.1.4 |
frDteRgIndexThis variable represents the index for the frDteRg tables. Integer32 .1.3.6.1.4.1.3764.1.1.30.101.4.1.1.10 |
frDteRgIfEntryTableThis group contains the provisionable attributes for the ifEntry. SEQUENCE OF FrDteRgIfEntryEntry .1.3.6.1.4.1.3764.1.1.30.101.4.10 |
frDteRgIfEntryEntryAn entry in the frDteRgIfEntryTable. FrDteRgIfEntryEntry .1.3.6.1.4.1.3764.1.1.30.101.4.10.1 |
frDteRgIfAdminStatusThe desired state of the interface. The up state indicates the
interface is operational. The down state indicates the interface is not
operational. The testing state indicates that no operational packets
can be passed.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.101.4.10.1.1 |
frDteRgIfIndexThis is the index for the IfEntry. Its value is automatically initialized
during the provisioning process.ro InterfaceIndex .1.3.6.1.4.1.3764.1.1.30.101.4.10.1.2 |
frDteRgProvTableThis group contains the provisioned attributes for the Remote Group
component. SEQUENCE OF FrDteRgProvEntry .1.3.6.1.4.1.3764.1.1.30.101.4.11 |
frDteRgProvEntryAn entry in the frDteRgProvTable. FrDteRgProvEntry .1.3.6.1.4.1.3764.1.1.30.101.4.11.1 |
frDteRgMaxTransmissionUnitThe Maximum Transmission Unit size of the largest datagram
(including Frame Relay header) which can be sent on the interface.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.101.4.11.1.1 |
frDteRgMpTableThis group contains the base provisioning data for the Media
Application component. SEQUENCE OF FrDteRgMpEntry .1.3.6.1.4.1.3764.1.1.30.101.4.12 |
frDteRgMpEntryAn entry in the frDteRgMpTable. FrDteRgMpEntry .1.3.6.1.4.1.3764.1.1.30.101.4.12.1 |
frDteRgLinkToProtocolPortThis attribute contains a protocol port component name. The attribute
associates the application with a protocol port.rw Link .1.3.6.1.4.1.3764.1.1.30.101.4.12.1.1 |
frDteRgStateTableThis group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. SEQUENCE OF FrDteRgStateEntry .1.3.6.1.4.1.3764.1.1.30.101.4.13 |
frDteRgStateEntryAn entry in the frDteRgStateTable. FrDteRgStateEntry .1.3.6.1.4.1.3764.1.1.30.101.4.13.1 |
frDteRgAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.101.4.13.1.1 |
frDteRgOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.101.4.13.1.2 |
frDteRgUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.101.4.13.1.3 |
frDteRgOperStatusTableThis group includes the Operational Status attribute. This attribute
defines the current operational state of this component. SEQUENCE OF FrDteRgOperStatusEntry .1.3.6.1.4.1.3764.1.1.30.101.4.14 |
frDteRgOperStatusEntryAn entry in the frDteRgOperStatusTable. FrDteRgOperStatusEntry .1.3.6.1.4.1.3764.1.1.30.101.4.14.1 |
frDteRgSnmpOperStatusThe current state of the interface. The up state indicates the
interface is operational and capable of forwarding packets. The
down state indicates the interface is not operational, thus unable to
forward packets. testing state indicates that no operational packets
can be passed.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.101.4.14.1.1 |
frDteRgBfr OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.101.4.15 |
frDteRgBfrRowStatusTableThis entry controls the addition and deletion of
frDteRgBfr components. SEQUENCE OF FrDteRgBfrRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.101.4.15.1 |
frDteRgBfrRowStatusEntryA single entry in the table represents a single
frDteRgBfr component. FrDteRgBfrRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.101.4.15.1.1 |
frDteRgBfrRowStatusThis variable is used as the basis for SNMP naming of
frDteRgBfr components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.101.4.15.1.1.1 |
frDteRgBfrComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.101.4.15.1.1.2 |
frDteRgBfrStorageTypeThis variable represents the storage type value for the
frDteRgBfr tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.101.4.15.1.1.4 |
frDteRgBfrIndexThis variable represents the index for the frDteRgBfr tables. NonReplicated .1.3.6.1.4.1.3764.1.1.30.101.4.15.1.1.10 |
frDteRgBfrProvTableThis group contains the provisioning attributes for the Bfr component. SEQUENCE OF FrDteRgBfrProvEntry .1.3.6.1.4.1.3764.1.1.30.101.4.15.10 |
frDteRgBfrProvEntryAn entry in the frDteRgBfrProvTable. FrDteRgBfrProvEntry .1.3.6.1.4.1.3764.1.1.30.101.4.15.10.1 |
frDteRgBfrMacTypeThis attribute specifies the MAC address type of the Bfr component.
The value must be chosen based on the media of the traffic source. For
traffic originated from FDDI, use fddi; for ethernet, use enet; for token
ring, use tokenRingrw Enumeration .1.3.6.1.4.1.3764.1.1.30.101.4.15.10.1.1 |
frDteRgBfrBfrIndexThis attribute specifies the value which is used to derive a unique MAC
address for the Bfr. The bfrIndex must be unique across all Bfrs on the
same Lp.rw INTEGER .1.3.6.1.4.1.3764.1.1.30.101.4.15.10.1.2 |
frDteRgBfrOprTableThis group contains the operational attributes for the Bfr component.. SEQUENCE OF FrDteRgBfrOprEntry .1.3.6.1.4.1.3764.1.1.30.101.4.15.11 |
frDteRgBfrOprEntryAn entry in the frDteRgBfrOprTable. FrDteRgBfrOprEntry .1.3.6.1.4.1.3764.1.1.30.101.4.15.11.1 |
frDteRgBfrMacAddrThis attribute indicates the unique MAC address of the Bfr component.
This value is derived by the value of the attribute bfrIndex.
The value is displayed as cannonical format.ro DashedHexString .1.3.6.1.4.1.3764.1.1.30.101.4.15.11.1.1 |
frDteRgLtDlciTableThis attribute associates a Rg component with zero or more StDlci
components. The Rg and StDlci components must be under the same
FrDte component. SEQUENCE OF FrDteRgLtDlciEntry .1.3.6.1.4.1.3764.1.1.30.101.4.219 |
frDteRgLtDlciEntryAn entry in the frDteRgLtDlciTable. FrDteRgLtDlciEntry .1.3.6.1.4.1.3764.1.1.30.101.4.219.1 |
frDteRgLtDlciValueThis variable represents both the value and the index for the
frDteRgLtDlciTable.rw Link .1.3.6.1.4.1.3764.1.1.30.101.4.219.1.1 |
frDteRgLtDlciRowStatusThis variable is used to control the addition and deletion
of individual values of the frDteRgLtDlciTable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.101.4.219.1.2 |
frDteDynDlciDefs OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.101.5 |
frDteDynDlciDefsRowStatusTableThis entry controls the addition and deletion of
frDteDynDlciDefs components. SEQUENCE OF FrDteDynDlciDefsRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.101.5.1 |
frDteDynDlciDefsRowStatusEntryA single entry in the table represents a single
frDteDynDlciDefs component. FrDteDynDlciDefsRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.101.5.1.1 |
frDteDynDlciDefsRowStatusThis variable is used as the basis for SNMP naming of
frDteDynDlciDefs components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.101.5.1.1.1 |
frDteDynDlciDefsComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.101.5.1.1.2 |
frDteDynDlciDefsStorageTypeThis variable represents the storage type value for the
frDteDynDlciDefs tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.101.5.1.1.4 |
frDteDynDlciDefsIndexThis variable represents the index for the frDteDynDlciDefs tables. NonReplicated .1.3.6.1.4.1.3764.1.1.30.101.5.1.1.10 |
frDteDynDlciDefsProvTableThis group contains the provisioned attributes for a virtual circuit. These
attributes represent the default settings for the resulting Dlci components
and can be operationally changed using the corresponding attributes
under the Dlci component. SEQUENCE OF FrDteDynDlciDefsProvEntry .1.3.6.1.4.1.3764.1.1.30.101.5.10 |
frDteDynDlciDefsProvEntryAn entry in the frDteDynDlciDefsProvTable. FrDteDynDlciDefsProvEntry .1.3.6.1.4.1.3764.1.1.30.101.5.10.1 |
frDteDynDlciDefsStdRowStatusThis attribute is used to manage the status of a StDlci component.
Set to active to enable the StDlci component.
Set to notInService to disable the StDlci component.
Set to createAndGo (SNMP only) to create a new StDlci component.
Set to destroy (SNMP only) to delete an existing StDlci component.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.101.5.10.1.1 |
frDteDynDlciDefsRateEnforcementThis attribute specifies whether the CIR attributes
committedInformationRate, committedBurst, and excessBurst are used to
define rate enforcement on this user DLCI.
If rateEnforcement is enabled, and the combined Committed and Excess
burst thresholds are exceeded, the frame in violation will be discarded
immediately if a HibernationQueue subcomponent is not provisioned
under the StDlci component. If a HibernationQueue is provisioned, the
frame will be placed on the HibernationQueue at time of violation and
transmission will be attempted later after the point at which the burst
thresholds will no longer be exceeded.
Setting all the CIR attributes to zero has the same affect as setting this
attribute to disabled.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.101.5.10.1.2 |
frDteDynDlciDefsCommittedInformationRateThe average number of bits to be transferred per second over the DLCI
to the DCE. When this attribute is set to zero, the link speed will be used
instead.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.101.5.10.1.3 |
frDteDynDlciDefsCommittedBurstThe committed burst size (in bits) to which the DLCI wants to
subscribe.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.101.5.10.1.4 |
frDteDynDlciDefsExcessBurstThe excess burst size (in bits) to which the DLCI wants to subscribe.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.101.5.10.1.5 |
frDteDynDlciDefsExcessBurstActionThis attribute specifies the action taken when the committedBurst size
has been exceeded on the DLCI but the excessBurst size has not. If the
attribute is set to setDeBit, the Discard Eligibility bit in the Frame Relay
header will be turned on. If the attribute is set to none, no action will be
taken.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.101.5.10.1.6 |
frDteDynDlciDefsIpCosThis attribute specifies the initial Class of Service (CoS) given to each
packet received on the on the virtual circuit identified by the dlci. The
CoS value n is used to select Vr/<string> QosP/n. which determines the
QualityofService-Profile to be used when the packet is forwarded.
The intial CoS given to a packet by the assignedQoS attribute may be
overriden when the cosPolicyAssignment attribute is defined on the
IpPort or Ip components.
When a packet is to be transmitted on a frDte protocol port where
multiple virtual circuits are available for the packet's next hop, the
packet is forwarded using the dlci where the ipCos value matches the
CoS of the packet. When the packets's CoS does not match the ipCos
value of any of the available virtual circuits, the packet will be
forwarded using next lowest CoS; failing this, the packet will be
forwarded using the next highest CoS.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.101.5.10.1.7 |
frDteStDlci OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.101.6 |
frDteStDlciRowStatusTableThis entry controls the addition and deletion of
frDteStDlci components. SEQUENCE OF FrDteStDlciRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.101.6.1 |
frDteStDlciRowStatusEntryA single entry in the table represents a single
frDteStDlci component. FrDteStDlciRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.101.6.1.1 |
frDteStDlciRowStatusThis variable is used as the basis for SNMP naming of
frDteStDlci components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.101.6.1.1.1 |
frDteStDlciComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.101.6.1.1.2 |
frDteStDlciStorageTypeThis variable represents the storage type value for the
frDteStDlci tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.101.6.1.1.4 |
frDteStDlciIndexThis variable represents the index for the frDteStDlci tables. Integer32 .1.3.6.1.4.1.3764.1.1.30.101.6.1.1.10 |
frDteStDlciHq OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.101.6.2 |
frDteStDlciHqRowStatusTableThis entry controls the addition and deletion of
frDteStDlciHq components. SEQUENCE OF FrDteStDlciHqRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.101.6.2.1 |
frDteStDlciHqRowStatusEntryA single entry in the table represents a single
frDteStDlciHq component. FrDteStDlciHqRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.101.6.2.1.1 |
frDteStDlciHqRowStatusThis variable is used as the basis for SNMP naming of
frDteStDlciHq components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.101.6.2.1.1.1 |
frDteStDlciHqComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.101.6.2.1.1.2 |
frDteStDlciHqStorageTypeThis variable represents the storage type value for the
frDteStDlciHq tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.101.6.2.1.1.4 |
frDteStDlciHqIndexThis variable represents the index for the frDteStDlciHq tables. NonReplicated .1.3.6.1.4.1.3764.1.1.30.101.6.2.1.1.10 |
frDteStDlciHqProvTableThis group contains the Link Emission Queue provisioned attributes. SEQUENCE OF FrDteStDlciHqProvEntry .1.3.6.1.4.1.3764.1.1.30.101.6.2.10 |
frDteStDlciHqProvEntryAn entry in the frDteStDlciHqProvTable. FrDteStDlciHqProvEntry .1.3.6.1.4.1.3764.1.1.30.101.6.2.10.1 |
frDteStDlciHqMaxPacketsThis attribute specifies the maximum number of packets allowed in the
Leq before being discarded. If this attribute is set to zero then the
maximum number of packets is calculated from the transmit data rate.
This calculated value is placed in queuePktThreshold.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.101.6.2.10.1.1 |
frDteStDlciHqMaxMsecDataThis attribute specifies the maximum number of 'Milliseconds worth of
data' allowed in the Leq before packets are discarded. The
queueByteThreshold will be calculated from this attribute, based on the
transmit data rate.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.101.6.2.10.1.2 |
frDteStDlciHqMaxPercentMulticastThis attribute specifies the maximum percentage of multicast packets
allowed in the Leq, based on queuePktThreshold, before being
discarded. The calculated value will be placed in
queueMulticastThreshold.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.101.6.2.10.1.3 |
frDteStDlciHqTimeToLiveThis attribute specifies the 'Milliseconds Time To Live' of packets in
the Leq. If the timeToLive of a packet expires, it will be discarded.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.101.6.2.10.1.4 |
frDteStDlciHqStatsTableThis group contains HibernationQueue general statistics. SEQUENCE OF FrDteStDlciHqStatsEntry .1.3.6.1.4.1.3764.1.1.30.101.6.2.11 |
frDteStDlciHqStatsEntryAn entry in the frDteStDlciHqStatsTable. FrDteStDlciHqStatsEntry .1.3.6.1.4.1.3764.1.1.30.101.6.2.11.1 |
frDteStDlciHqTimedOutPktThis attribute counts the number of packets that have been discarded due
to exceeding the timeToLive. This counter will wrap around to 0 when it
exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.101.6.2.11.1.1 |
frDteStDlciHqQueuePurgeDiscardsThis attribute counts the total number of packets discarded by a queue
purge which occurs when the Dlci goes down. This counter will wrap
around to 0 when it exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.101.6.2.11.1.2 |
frDteStDlciHqTStatsTableThis group contains Link Emission Queue total statistics. SEQUENCE OF FrDteStDlciHqTStatsEntry .1.3.6.1.4.1.3764.1.1.30.101.6.2.12 |
frDteStDlciHqTStatsEntryAn entry in the frDteStDlciHqTStatsTable. FrDteStDlciHqTStatsEntry .1.3.6.1.4.1.3764.1.1.30.101.6.2.12.1 |
frDteStDlciHqTotalPktHandledThis attribute counts the total number of packets handled by the Leq.
This counter will wrap around to 0 when it exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.101.6.2.12.1.1 |
frDteStDlciHqTotalPktForwardedThis attribute counts the total number of packets forwarded by the Leq.
This counter will wrap around to 0 when it exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.101.6.2.12.1.2 |
frDteStDlciHqTotalPktQueuedThis attribute counts the total number of packets that required queuing
by the Leq due to transmit congestion. This counter will wrap around to
0 when it exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.101.6.2.12.1.3 |
frDteStDlciHqTotalMulticastPktThis attribute counts the total number of multicast packets handled by
this instance of FrDte. This counter will wrap around to 0 when it
exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.101.6.2.12.1.4 |
frDteStDlciHqTotalPktDiscardsThis attribute counts the total number of packets that were discarded for
this instance of FrDte. This is the sum of timedOutPkt,
forcedPktDiscards, queuePurgeDiscards, pktThresholdExceeded,
byteThresholdExceeded, mulThresholdExceeded and
memThresholdExceeded. This counter will wrap around to 0 when it
exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.101.6.2.12.1.5 |
frDteStDlciHqCStatsTableThis group contains Link Emission Queue current statistics. SEQUENCE OF FrDteStDlciHqCStatsEntry .1.3.6.1.4.1.3764.1.1.30.101.6.2.13 |
frDteStDlciHqCStatsEntryAn entry in the frDteStDlciHqCStatsTable. FrDteStDlciHqCStatsEntry .1.3.6.1.4.1.3764.1.1.30.101.6.2.13.1 |
frDteStDlciHqCurrentPktQueuedThis attribute contains the current number of packets queued.ro Gauge32 .1.3.6.1.4.1.3764.1.1.30.101.6.2.13.1.1 |
frDteStDlciHqCurrentBytesQueuedThis attribute contains the current number of bytes queued.ro Gauge32 .1.3.6.1.4.1.3764.1.1.30.101.6.2.13.1.2 |
frDteStDlciHqCurrentMulticastQueuedThis attribute counts the current number of multicast packets in the
queue.ro Gauge32 .1.3.6.1.4.1.3764.1.1.30.101.6.2.13.1.3 |
frDteStDlciHqThrStatsTableThis group contains Link Emission Queue threshold statistics. SEQUENCE OF FrDteStDlciHqThrStatsEntry .1.3.6.1.4.1.3764.1.1.30.101.6.2.14 |
frDteStDlciHqThrStatsEntryAn entry in the frDteStDlciHqThrStatsTable. FrDteStDlciHqThrStatsEntry .1.3.6.1.4.1.3764.1.1.30.101.6.2.14.1 |
frDteStDlciHqQueuePktThresholdThis attribute is the maximum number of packets that can be contained
in the queue before being discarded. If maxPackets was set to 0 then this
attribute will contain the value that has been calculated based on the
transmit data rate. If maxPackets was set to one or more than this
attribute will contain that number.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.101.6.2.14.1.1 |
frDteStDlciHqPktThresholdExceededThis attribute counts the number of packets discarded due to the
queuePktThreshold being exceeded. This counter will wrap around to 0
when it exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.101.6.2.14.1.2 |
frDteStDlciHqQueueByteThresholdThis attribute is the maximum number of bytes allowed in the queue
based on maxMsecData and the transmit data rate.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.101.6.2.14.1.3 |
frDteStDlciHqByteThresholdExceededThis attribute counts the number of packets discarded due to the
queueByteThreshold being exceeded. This counter will wrap around to 0
when it exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.101.6.2.14.1.4 |
frDteStDlciHqQueueMulticastThresholdThis attribute is the number of multicast packets allowed in the queue
based on maxPercentMulticast and maxPackets.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.101.6.2.14.1.5 |
frDteStDlciHqMulThresholdExceededThis attribute counts the number of packets discarded due to the
queueMulticastThreshold being exceeded. This counter will wrap
around to 0 when it exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.101.6.2.14.1.6 |
frDteStDlciHqMemThresholdExceededThis attribute counts the number of packets discarded due to exceeding
the memory usage threshold for Leq. The memory usage threshold is
determined by the Leq software, guaranteeing that the Leq does not
consume all of the memory. This counter will wrap around to 0 when it
exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.101.6.2.14.1.7 |
frDteStDlciProvTableThis group contains the provisioned attributes for a virtual circuit. These
attributes represent the default settings for the resulting Dlci components
and can be operationally changed using the corresponding attributes
under the Dlci component. SEQUENCE OF FrDteStDlciProvEntry .1.3.6.1.4.1.3764.1.1.30.101.6.10 |
frDteStDlciProvEntryAn entry in the frDteStDlciProvTable. FrDteStDlciProvEntry .1.3.6.1.4.1.3764.1.1.30.101.6.10.1 |
frDteStDlciStdRowStatusThis attribute is used to manage the status of a StDlci component.
Set to active to enable the StDlci component.
Set to notInService to disable the StDlci component.
Set to createAndGo (SNMP only) to create a new StDlci component.
Set to destroy (SNMP only) to delete an existing StDlci component.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.101.6.10.1.1 |
frDteStDlciRateEnforcementThis attribute specifies whether the CIR attributes
committedInformationRate, committedBurst, and excessBurst are used to
define rate enforcement on this user DLCI.
If rateEnforcement is enabled, and the combined Committed and Excess
burst thresholds are exceeded, the frame in violation will be discarded
immediately if a HibernationQueue subcomponent is not provisioned
under the StDlci component. If a HibernationQueue is provisioned, the
frame will be placed on the HibernationQueue at time of violation and
transmission will be attempted later after the point at which the burst
thresholds will no longer be exceeded.
Setting all the CIR attributes to zero has the same affect as setting this
attribute to disabled.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.101.6.10.1.2 |
frDteStDlciCommittedInformationRateThe average number of bits to be transferred per second over the DLCI
to the DCE. When this attribute is set to zero, the link speed will be used
instead.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.101.6.10.1.3 |
frDteStDlciCommittedBurstThe committed burst size (in bits) to which the DLCI wants to
subscribe.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.101.6.10.1.4 |
frDteStDlciExcessBurstThe excess burst size (in bits) to which the DLCI wants to subscribe.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.101.6.10.1.5 |
frDteStDlciExcessBurstActionThis attribute specifies the action taken when the committedBurst size
has been exceeded on the DLCI but the excessBurst size has not. If the
attribute is set to setDeBit, the Discard Eligibility bit in the Frame Relay
header will be turned on. If the attribute is set to none, no action will be
taken.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.101.6.10.1.6 |
frDteStDlciIpCosThis attribute specifies the initial Class of Service (CoS) given to each
packet received on the on the virtual circuit identified by the dlci. The
CoS value n is used to select Vr/<string> QosP/n. which determines the
QualityofService-Profile to be used when the packet is forwarded.
The intial CoS given to a packet by the assignedQoS attribute may be
overriden when the cosPolicyAssignment attribute is defined on the
IpPort or Ip components.
When a packet is to be transmitted on a frDte protocol port where
multiple virtual circuits are available for the packet's next hop, the
packet is forwarded using the dlci where the ipCos value matches the
CoS of the packet. When the packets's CoS does not match the ipCos
value of any of the available virtual circuits, the packet will be
forwarded using next lowest CoS; failing this, the packet will be
forwarded using the next highest CoS.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.101.6.10.1.7 |
frDteStDlciRgLinkTableThis group provides the link between a Dlci and a remoteGroup. SEQUENCE OF FrDteStDlciRgLinkEntry .1.3.6.1.4.1.3764.1.1.30.101.6.11 |
frDteStDlciRgLinkEntryAn entry in the frDteStDlciRgLinkTable. FrDteStDlciRgLinkEntry .1.3.6.1.4.1.3764.1.1.30.101.6.11.1 |
frDteStDlciLinkToRemoteGroupThis attribute associates a StDlci component with a Rg component.
Provisioned StDlci components must be linked to a Rg component
which is under the same FrDte component.rw Link .1.3.6.1.4.1.3764.1.1.30.101.6.11.1.1 |
frDteLeq OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.101.7 |
frDteLeqRowStatusTableThis entry controls the addition and deletion of
frDteLeq components. SEQUENCE OF FrDteLeqRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.101.7.1 |
frDteLeqRowStatusEntryA single entry in the table represents a single
frDteLeq component. FrDteLeqRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.101.7.1.1 |
frDteLeqRowStatusThis variable is used as the basis for SNMP naming of
frDteLeq components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.101.7.1.1.1 |
frDteLeqComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.101.7.1.1.2 |
frDteLeqStorageTypeThis variable represents the storage type value for the
frDteLeq tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.101.7.1.1.4 |
frDteLeqIndexThis variable represents the index for the frDteLeq tables. NonReplicated .1.3.6.1.4.1.3764.1.1.30.101.7.1.1.10 |
frDteLeqProvTableThis group contains the Link Emission Queue provisioned attributes. SEQUENCE OF FrDteLeqProvEntry .1.3.6.1.4.1.3764.1.1.30.101.7.10 |
frDteLeqProvEntryAn entry in the frDteLeqProvTable. FrDteLeqProvEntry .1.3.6.1.4.1.3764.1.1.30.101.7.10.1 |
frDteLeqMaxPacketsThis attribute specifies the maximum number of packets allowed in the
Leq before being discarded. If this attribute is set to zero then the
maximum number of packets is calculated from the transmit data rate.
This calculated value is placed in queuePktThreshold.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.101.7.10.1.1 |
frDteLeqMaxMsecDataThis attribute specifies the maximum number of 'Milliseconds worth of
data' allowed in the Leq before packets are discarded. The
queueByteThreshold will be calculated from this attribute, based on the
transmit data rate.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.101.7.10.1.2 |
frDteLeqMaxPercentMulticastThis attribute specifies the maximum percentage of multicast packets
allowed in the Leq, based on queuePktThreshold, before being
discarded. The calculated value will be placed in
queueMulticastThreshold.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.101.7.10.1.3 |
frDteLeqTimeToLiveThis attribute specifies the 'Milliseconds Time To Live' of packets in
the Leq. If the timeToLive of a packet expires, it will be discarded.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.101.7.10.1.4 |
frDteLeqStatsTableThis group contains Link Emission Queue general statistics. SEQUENCE OF FrDteLeqStatsEntry .1.3.6.1.4.1.3764.1.1.30.101.7.11 |
frDteLeqStatsEntryAn entry in the frDteLeqStatsTable. FrDteLeqStatsEntry .1.3.6.1.4.1.3764.1.1.30.101.7.11.1 |
frDteLeqTimedOutPktThis attribute counts the number of packets that have been discarded due
to exceeding the timeToLive. This counter will wrap around to 0 when it
exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.101.7.11.1.1 |
frDteLeqHardwareForcedPktThis attribute counts the number of hardware forced packets on this
instance of FrDte. This counter will wrap around to 0 when it exceeds
its maximum count.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.101.7.11.1.2 |
frDteLeqForcedPktDiscardsThis attribute counts the total number of hardware forced packets that
had to be discarded due to link failure. This counter will wrap around to
0 when it exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.101.7.11.1.3 |
frDteLeqQueuePurgeDiscardsThis attribute counts the total number of packets discarded by a queue
purge (i.e. a discarding of all packets on the queue). This counter will
wrap around to 0 when it exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.101.7.11.1.4 |
frDteLeqTStatsTableThis group contains Link Emission Queue total statistics. SEQUENCE OF FrDteLeqTStatsEntry .1.3.6.1.4.1.3764.1.1.30.101.7.12 |
frDteLeqTStatsEntryAn entry in the frDteLeqTStatsTable. FrDteLeqTStatsEntry .1.3.6.1.4.1.3764.1.1.30.101.7.12.1 |
frDteLeqTotalPktHandledThis attribute counts the total number of packets handled by the Leq.
This counter will wrap around to 0 when it exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.101.7.12.1.1 |
frDteLeqTotalPktForwardedThis attribute counts the total number of packets forwarded by the Leq.
This counter will wrap around to 0 when it exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.101.7.12.1.2 |
frDteLeqTotalPktQueuedThis attribute counts the total number of packets that required queuing
by the Leq due to transmit congestion. This counter will wrap around to
0 when it exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.101.7.12.1.3 |
frDteLeqTotalMulticastPktThis attribute counts the total number of multicast packets handled by
this instance of FrDte. This counter will wrap around to 0 when it
exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.101.7.12.1.4 |
frDteLeqTotalPktDiscardsThis attribute counts the total number of packets that were discarded for
this instance of FrDte. This is the sum of timedOutPkt,
forcedPktDiscards, queuePurgeDiscards, pktThresholdExceeded,
byteThresholdExceeded, mulThresholdExceeded and
memThresholdExceeded. This counter will wrap around to 0 when it
exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.101.7.12.1.5 |
frDteLeqCStatsTableThis group contains Link Emission Queue current statistics. SEQUENCE OF FrDteLeqCStatsEntry .1.3.6.1.4.1.3764.1.1.30.101.7.13 |
frDteLeqCStatsEntryAn entry in the frDteLeqCStatsTable. FrDteLeqCStatsEntry .1.3.6.1.4.1.3764.1.1.30.101.7.13.1 |
frDteLeqCurrentPktQueuedThis attribute contains the current number of packets queued.ro Gauge32 .1.3.6.1.4.1.3764.1.1.30.101.7.13.1.1 |
frDteLeqCurrentBytesQueuedThis attribute contains the current number of bytes queued.ro Gauge32 .1.3.6.1.4.1.3764.1.1.30.101.7.13.1.2 |
frDteLeqCurrentMulticastQueuedThis attribute counts the current number of multicast packets in the
queue.ro Gauge32 .1.3.6.1.4.1.3764.1.1.30.101.7.13.1.3 |
frDteLeqThrStatsTableThis group contains Link Emission Queue threshold statistics. SEQUENCE OF FrDteLeqThrStatsEntry .1.3.6.1.4.1.3764.1.1.30.101.7.14 |
frDteLeqThrStatsEntryAn entry in the frDteLeqThrStatsTable. FrDteLeqThrStatsEntry .1.3.6.1.4.1.3764.1.1.30.101.7.14.1 |
frDteLeqQueuePktThresholdThis attribute is the maximum number of packets that can be contained
in the queue before being discarded. If maxPackets was set to 0 then this
attribute will contain the value that has been calculated based on the
transmit data rate. If maxPackets was set to one or more than this
attribute will contain that number.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.101.7.14.1.1 |
frDteLeqPktThresholdExceededThis attribute counts the number of packets discarded due to the
queuePktThreshold being exceeded. This counter will wrap around to 0
when it exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.101.7.14.1.2 |
frDteLeqQueueByteThresholdThis attribute is the maximum number of bytes allowed in the queue
based on maxMsecData and the transmit data rate.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.101.7.14.1.3 |
frDteLeqByteThresholdExceededThis attribute counts the number of packets discarded due to the
queueByteThreshold being exceeded. This counter will wrap around to 0
when it exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.101.7.14.1.4 |
frDteLeqQueueMulticastThresholdThis attribute is the number of multicast packets allowed in the queue
based on maxPercentMulticast and maxPackets.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.101.7.14.1.5 |
frDteLeqMulThresholdExceededThis attribute counts the number of packets discarded due to the
queueMulticastThreshold being exceeded. This counter will wrap
around to 0 when it exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.101.7.14.1.6 |
frDteLeqMemThresholdExceededThis attribute counts the number of packets discarded due to exceeding
the memory usage threshold for Leq. The memory usage threshold is
determined by the Leq software, guaranteeing that the Leq does not
consume all of the memory. This counter will wrap around to 0 when it
exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.101.7.14.1.7 |
frDteDlci OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.101.8 |
frDteDlciRowStatusTable*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This entry controls the addition and deletion of
frDteDlci components. SEQUENCE OF FrDteDlciRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.101.8.1 |
frDteDlciRowStatusEntryA single entry in the table represents a single
frDteDlci component. FrDteDlciRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.101.8.1.1 |
frDteDlciRowStatusThis variable is used as the basis for SNMP naming of
frDteDlci components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.101.8.1.1.1 |
frDteDlciComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.101.8.1.1.2 |
frDteDlciStorageTypeThis variable represents the storage type value for the
frDteDlci tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.101.8.1.1.4 |
frDteDlciIndexThis variable represents the index for the frDteDlci tables. Integer32 .1.3.6.1.4.1.3764.1.1.30.101.8.1.1.10 |
frDteDlciStateTable*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. SEQUENCE OF FrDteDlciStateEntry .1.3.6.1.4.1.3764.1.1.30.101.8.10 |
frDteDlciStateEntryAn entry in the frDteDlciStateTable. FrDteDlciStateEntry .1.3.6.1.4.1.3764.1.1.30.101.8.10.1 |
frDteDlciAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.101.8.10.1.1 |
frDteDlciOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.101.8.10.1.2 |
frDteDlciUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.101.8.10.1.3 |
frDteDlciOperTable*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This group contains the operational attributes for the Dlci component. SEQUENCE OF FrDteDlciOperEntry .1.3.6.1.4.1.3764.1.1.30.101.8.11 |
frDteDlciOperEntryAn entry in the frDteDlciOperTable. FrDteDlciOperEntry .1.3.6.1.4.1.3764.1.1.30.101.8.11.1 |
frDteDlciDlciStateThis attribute reflects the current operational circuit state of the Dlci.
The state active indicates that the circuit is up and inactive that the
circuit is down. The state invalid means the circuit has been deleted by
the DCE (via Lmi).ro Enumeration .1.3.6.1.4.1.3764.1.1.30.101.8.11.1.4 |
frDteDlciLastTimeChangeThe last time dlciState changed state.ro EnterpriseDateAndTime .1.3.6.1.4.1.3764.1.1.30.101.8.11.1.5 |
frDteDlciSentFramesNumber of frames transmitted across the interface. This counter will
wrap around to 0 when it exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.101.8.11.1.7 |
frDteDlciSentOctetsThe number of octets sent from this virtual circuit since it was created.
This counter will wrap around to 0 when it exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.101.8.11.1.8 |
frDteDlciReceivedFramesNumber of frames received across the interface. This counter will wrap
around to 0 when it exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.101.8.11.1.9 |
frDteDlciReceivedOctetsThe number of octets sent from this virtual circuit since it was created.
This counter will wrap around to 0 when it exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.101.8.11.1.10 |
frDteDlciReceivedFECNsNumber of frames with the FECN bit set received from the network.
This counter will wrap around to 0 when it exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.101.8.11.1.11 |
frDteDlciReceivedBECNsNumber of frames with the BECN bit set received from the network.
This counter will wrap around to 0 when it exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.101.8.11.1.12 |
frDteDlciDiscardedFramesThe number of inbound frames dropped because of format errors, or
because the VC was inactive. This counter will wrap around to 0 when it
exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.101.8.11.1.13 |
frDteDlciCreationTypeThis indicates whether the virtual circuit was manually created (static),
or dynamically created (dynamic) via the data link control management
interface.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.101.8.11.1.14 |
frDteDlciCreationTimeThe time when the circuit was created, whether by the Data Link
Connection Management Interface or by an SNMP set request.ro EnterpriseDateAndTime .1.3.6.1.4.1.3764.1.1.30.101.8.11.1.15 |
frDteDlciRateEnforcementThis attribute specifies whether the CIR attributes
committedInformationRate, committedBurst, and excessBurst are used to
define rate enforcement on this user DLCI.
If rateEnforcement is enabled, and the combined Committed and Excess
burst thresholds are exceeded, the frame in violation will be discarded
immediately if a HibernationQueue subcomponent is not provisioned
under the StDlci component (static entries only). If a HibernationQueue
is provisioned, the frame will be placed on the HibernationQueue at
time of violation and transmission will be attempted later after the point
at which the burst thresholds will no longer be exceeded.
Setting all the CIR attributes to zero has the same affect as setting this
attribute to disabled.
Setting this attribute will operationally override the corresponding
provisional value on static entries.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.101.8.11.1.17 |
frDteDlciCommittedInformationRateThe average number of bits to be transferred per second over the DLCI
to the DCE. When this attribute is set to zero, the link speed will be used
instead.
Setting this attribute will operationally override the corresponding
provisional value on static entries.rw Gauge32 .1.3.6.1.4.1.3764.1.1.30.101.8.11.1.18 |
frDteDlciCommittedBurstThe committed burst size (in bits) to which the DLCI wants to
subscribe.
Setting this attribute will operationally override the corresponding
provisional value on static entries.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.101.8.11.1.19 |
frDteDlciExcessBurstThe excess burst size (in bits) to which the DLCI wants to subscribe.
Setting this attribute will operationally override the corresponding
provisional value on static entries.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.101.8.11.1.20 |
frDteDlciExcessBurstActionThis attribute specifies the action taken when the committedBurst size
has been exceeded on the Dlci but the excessBurst size has not. If the
attribute is set to setDeBit, the Discard Eligibility bit in the Frame Relay
header will be turned on. If the attribute is set to none, no action will be
taken.
Setting this attribute will operationally override the corresponding
provisional value on static entries.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.101.8.11.1.21 |
frDteVFramer OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.101.9 |
frDteVFramerRowStatusTableThis entry controls the addition and deletion of
frDteVFramer components. SEQUENCE OF FrDteVFramerRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.101.9.1 |
frDteVFramerRowStatusEntryA single entry in the table represents a single
frDteVFramer component. FrDteVFramerRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.101.9.1.1 |
frDteVFramerRowStatusThis variable is used as the basis for SNMP naming of
frDteVFramer components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.101.9.1.1.1 |
frDteVFramerComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.101.9.1.1.2 |
frDteVFramerStorageTypeThis variable represents the storage type value for the
frDteVFramer tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.101.9.1.1.4 |
frDteVFramerIndexThis variable represents the index for the frDteVFramer tables. NonReplicated .1.3.6.1.4.1.3764.1.1.30.101.9.1.1.10 |
frDteVFramerProvTableThis group contains provisionable attributes for the VirtualFramer
component. SEQUENCE OF FrDteVFramerProvEntry .1.3.6.1.4.1.3764.1.1.30.101.9.10 |
frDteVFramerProvEntryAn entry in the frDteVFramerProvTable. FrDteVFramerProvEntry .1.3.6.1.4.1.3764.1.1.30.101.9.10.1 |
frDteVFramerOtherVirtualFramerThis attribute specifies the other VirtualFramer to which the service
is linked, for example, FrUni/n VirtualFramer, FrDte/n
VirtualFramer.rw Link .1.3.6.1.4.1.3764.1.1.30.101.9.10.1.1 |
frDteVFramerLogicalProcessorThis attribute specifies the logical processor on which the service
component will reside.rw Link .1.3.6.1.4.1.3764.1.1.30.101.9.10.1.2 |
frDteVFramerStateTableThis group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. SEQUENCE OF FrDteVFramerStateEntry .1.3.6.1.4.1.3764.1.1.30.101.9.11 |
frDteVFramerStateEntryAn entry in the frDteVFramerStateTable. FrDteVFramerStateEntry .1.3.6.1.4.1.3764.1.1.30.101.9.11.1 |
frDteVFramerAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.101.9.11.1.1 |
frDteVFramerOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.101.9.11.1.2 |
frDteVFramerUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.101.9.11.1.3 |
frDteVFramerStatsTableThis group contains the operational statistics data for a
VirtualFramer component. SEQUENCE OF FrDteVFramerStatsEntry .1.3.6.1.4.1.3764.1.1.30.101.9.12 |
frDteVFramerStatsEntryAn entry in the frDteVFramerStatsTable. FrDteVFramerStatsEntry .1.3.6.1.4.1.3764.1.1.30.101.9.12.1 |
frDteVFramerFrmToOtherVFramerThis attribute counts the frames transmitted to the
otherVirtualFramer.ro PassportCounter64 .1.3.6.1.4.1.3764.1.1.30.101.9.12.1.2 |
frDteVFramerFrmFromOtherVFramerThis attribute counts the frames received from the
otherVirtualFramer.ro PassportCounter64 .1.3.6.1.4.1.3764.1.1.30.101.9.12.1.3 |
frDteVFramerOctetFromOtherVFramerThis attribute counts the octets received from the
otherVirtualFramer.ro PassportCounter64 .1.3.6.1.4.1.3764.1.1.30.101.9.12.1.5 |
frDteCidDataTableThis group contains the attribute for a component's Customer
Identifier (CID). Refer to the attribute description for a detailed
explanation of CIDs. SEQUENCE OF FrDteCidDataEntry .1.3.6.1.4.1.3764.1.1.30.101.20 |
frDteCidDataEntryAn entry in the frDteCidDataTable. FrDteCidDataEntry .1.3.6.1.4.1.3764.1.1.30.101.20.1 |
frDteCustomerIdentifierThis attribute holds the Customer Identifier (CID).
Every component has a CID. If a component has a cid attribute, the
component's CID is the provisioned value of that attribute;
otherwise the component inherits the CID of its parent. The top-
level component has a CID of 0.
Every operator session also has a CID, which is the CID
provisioned for the operator's user ID. An operator will see only the
stream data for components having a matching CID. Also, the
operator will be allowed to issue commands for only those
components which have a matching CID.
An operator CID of 0 is used to identify the Network Manager
(referred to as 'NetMan' in DPN). This CID matches the CID of
any component. Values 1 to 8191 inclusive (equivalent to 'basic
CIDs' in DPN) may be assigned to specific customers.rw Unsigned32 (0 | 1..8191) .1.3.6.1.4.1.3764.1.1.30.101.20.1.1 |
frDteIfEntryTableThis group contains the provisionable attributes for the ifEntry. SEQUENCE OF FrDteIfEntryEntry .1.3.6.1.4.1.3764.1.1.30.101.21 |
frDteIfEntryEntryAn entry in the frDteIfEntryTable. FrDteIfEntryEntry .1.3.6.1.4.1.3764.1.1.30.101.21.1 |
frDteIfAdminStatusThe desired state of the interface. The up state indicates the
interface is operational. The down state indicates the interface is not
operational. The testing state indicates that no operational packets
can be passed.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.101.21.1.1 |
frDteIfIndexThis is the index for the IfEntry. Its value is automatically initialized
during the provisioning process.ro InterfaceIndex .1.3.6.1.4.1.3764.1.1.30.101.21.1.2 |
frDteProvTableThis group contains the provisioned attributes for the FrDte component. SEQUENCE OF FrDteProvEntry .1.3.6.1.4.1.3764.1.1.30.101.22 |
frDteProvEntryAn entry in the frDteProvTable. FrDteProvEntry .1.3.6.1.4.1.3764.1.1.30.101.22.1 |
frDteAcceptUndefinedDlciThis parameter allows previously undefined Data Link Connection
Identifiers (DLCIs) to be dynamically accepted in the default remote
group. If set to enabled, undefined DLCIs will be accepted, if disabled,
they will not.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.101.22.1.1 |
frDteStateTableThis group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. SEQUENCE OF FrDteStateEntry .1.3.6.1.4.1.3764.1.1.30.101.23 |
frDteStateEntryAn entry in the frDteStateTable. FrDteStateEntry .1.3.6.1.4.1.3764.1.1.30.101.23.1 |
frDteAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.101.23.1.1 |
frDteOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.101.23.1.2 |
frDteUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.101.23.1.3 |
frDteOperStatusTableThis group includes the Operational Status attribute. This attribute
defines the current operational state of this component. SEQUENCE OF FrDteOperStatusEntry .1.3.6.1.4.1.3764.1.1.30.101.24 |
frDteOperStatusEntryAn entry in the frDteOperStatusTable. FrDteOperStatusEntry .1.3.6.1.4.1.3764.1.1.30.101.24.1 |
frDteSnmpOperStatusThe current state of the interface. The up state indicates the
interface is operational and capable of forwarding packets. The
down state indicates the interface is not operational, thus unable to
forward packets. testing state indicates that no operational packets
can be passed.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.101.24.1.1 |
frDteOperTableThis group contains the operational attributes for the FrDte component. SEQUENCE OF FrDteOperEntry .1.3.6.1.4.1.3764.1.1.30.101.25 |
frDteOperEntryAn entry in the frDteOperTable. FrDteOperEntry .1.3.6.1.4.1.3764.1.1.30.101.25.1 |
frDteLinkOperStateThis attribute describes the operational state of the Link Control
protocol. If the interface to the physical link hardware is inactive, the
linkOperState is in the down state.
The polling state only occurs when the Local Management Interface
(LMI) is enabled and the physical link is active. The polling state
indicates LMI is polling for its peer. Once communication is established
the linkOperState will transition to the active state.
If the procedure attribute of the Lmi component is set to none,
linkOperState will transition to the active state once the physical link
becomes active.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.101.25.1.1 |
frDteErrTableThis group contains the SNMP frErrEntry attributes for the FrDte
component. SEQUENCE OF FrDteErrEntry .1.3.6.1.4.1.3764.1.1.30.101.26 |
frDteErrEntryAn entry in the frDteErrTable. FrDteErrEntry .1.3.6.1.4.1.3764.1.1.30.101.26.1 |
frDteErrTypeThe type of error that was last seen on this interface. The error types are
as follows:
receiveShort: This error indicates a received frame was discarded
because it was less than four octets long or it was missing the
Organizationally Unique Identifier (OUI) for a SNAP header.
receiveLong: This error indicates a received frame was discarded
because it was longer than expected. This error is currently not used on
this interface.
illegalDlci: This error indicates that a received frame was discarded
because it's Q.922 address was not two octets in length. This error could
also indicate that a frame was discarded because it was received on a
DLCI reserved for LMI which had not been provisioned active.
dlcmiProtoErr: This error indicates an LMI frame was received with
contents formatted incorrectly.
dlcmiUnknownIe: This error indicates that an LMI frame was received
which contained an unsupported Information Element (IE) type
dlcmiSequenceErr: This error indicates that an LMI frame was received
whose Keep Alive Sequence was incorrect.
dlcmiUnknownRpt: This error indicates that an LMI frame was received
which contained a Report-type Information Element with an invalid type
of report.
noErrorSinceReset: This error type indicates that there has not been an
error since the interface has been reset.
unknownError: This error type contains the cumulation of receive
frame errors that did not fit one of the MIB error descriptions above.
These errors include those counted by the following attributes:
ulpUnknownProtocol - A received frame was discarded because the
Upper Level Protocol (ULP) encapsulation used was unsupported.
badFc - A received frame was discarded because the frame control
character was incorrect.
defragSequenceErrors - A fragment was received which was discarded
due to an out of sequence error detection.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.101.26.1.2 |
frDteErrDataAn octet string containing the first part of the frame in which an error
was last detected.ro HexString .1.3.6.1.4.1.3764.1.1.30.101.26.1.3 |
frDteErrTimeThe time at which the last error was detected and recorded in errType.ro EnterpriseDateAndTime .1.3.6.1.4.1.3764.1.1.30.101.26.1.4 |
frDteErrDiscardsNumber of inbound frames dropped because of format errors or because
the virtual circuit was not known. Format errors, in this case, are any
errors which would prevent the system from recognizing the DLCI and
placing the error in the discard category.
This counter will wrap around to 0 when it exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.101.26.1.6 |
frDteErrFaultsThis attribute counts the number of times LMI has taken down the
interface. When the procedure attribute of the Lmi component is set to
none, this counter will not be incremented.
This counter will wrap around to 0 when it exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.101.26.1.7 |
frDteErrFaultTimeThe last time the errFaults counter was incremented.ro EnterpriseDateAndTime .1.3.6.1.4.1.3764.1.1.30.101.26.1.8 |
frDteErrStatsTableThis group contains error counters for the FrDte. SEQUENCE OF FrDteErrStatsEntry .1.3.6.1.4.1.3764.1.1.30.101.27 |
frDteErrStatsEntryAn entry in the frDteErrStatsTable. FrDteErrStatsEntry .1.3.6.1.4.1.3764.1.1.30.101.27.1 |
frDteXmitDiscardPvcDownCount of transmitted frames discarded because the Dlci or a component
positioned in a hierarchically fashion above it (e.g. it's remote group or
the FrDte component) was administratively disabled.
This counter will wrap around to 0 when it exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.101.27.1.1 |
frDteXmitDiscardLmiInactiveCount of transmitted frames discarded because the Local Management
Interface (LMI) was not yet active (i.e. LMI was still in the polling
state).
This counter will wrap around to 0 when it exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.101.27.1.2 |
frDteXmitDiscardFramerDownCount of transmitted frames discarded because the framer component
was down.
This counter will wrap around to 0 when it exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.101.27.1.3 |
frDteXmitDiscardPvcInactiveCount of transmitted frames discarded because the Local Management
Interface (LMI) had inactivated or invalidated the Dlci.
This counter will wrap around to 0 when it exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.101.27.1.4 |
frDteXmitDiscardCirExceededCount of transmitted frames discarded because CIR was enabled on a
Dlci without a HibernationQueue subcomponent and the traffic
exceeded the combined Committed and Excess Burst thresholds.
This counter will wrap around to 0 when it exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.101.27.1.5 |
frDteRecvDiscardPvcDownCount of received frames discarded because the Dlci or a component
positioned in a hierarchically fashion above it (e.g. it's remote group or
the FrDte component) was administratively disabled.
This counter will wrap around to 0 when it exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.101.27.1.6 |
frDteRecvDiscardLmiInactiveCount of received frames discarded because the Local Management
Interface (LMI) was not yet active (i.e. LMI was still in the polling
state).
This counter will wrap around to 0 when it exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.101.27.1.7 |
frDteRecvDiscardPvcInactiveCount of received frames discarded because the Local Management
Interface (LMI) had inactivated or invalidated the Dlci.
This counter will wrap around to 0 when it exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.101.27.1.8 |
frDteBadFcCount of received frames discarded because the frame control character
was incorrect. This may indicate that the other side of the link is
configured for a different link level protocol.
This counter will wrap around to 0 when it exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.101.27.1.9 |
frDteUlpUnknownProtocolCount of received frames discarded because the Upper Level Protocol
(ULP) encapsulation used was unsupported.
This counter will wrap around to 0 when it exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.101.27.1.10 |
frDteDefragSequenceErrorsCount of fragments received which were discarded due to out of
sequence error detection.
This counter will wrap around to 0 when it exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.101.27.1.11 |
frDteReceiveShortCount of received frames (including LMI frames) discarded because
they were less than four octets long or they were missing the
Organizationally Unique Identifier (OUI) for a SNAP header.
This counter will wrap around to 0 when it exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.101.27.1.12 |
frDteIllegalDlciCount of received frames discarded because their Q.922 address was not
two octets in length. This count also includes frames discarded because
they were received on a Dlci reserved for LMI which had not been
provisioned active.
This counter will wrap around to 0 when it exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.101.27.1.13 |
frDteDlcmiProtoErrCount of received LMI frames whose contents were formatted
incorrectly.
This counter will wrap around to 0 when it exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.101.27.1.14 |
frDteDlcmiUnknownIeCount of received LMI frames which contained an unsupported
Information Element (IE) type.
This counter will wrap around to 0 when it exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.101.27.1.15 |
frDteDlcmiSequenceErrCount of received LMI frames whose Keep Alive Sequence was
incorrect.
This counter will wrap around to 0 when it exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.101.27.1.16 |
frDteDlcmiUnknownRptCount of received LMI frames which contained a Report-type
Information Element with an invalid type of report.
This counter will wrap around to 0 when it exceeds its maximum count.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.101.27.1.17 |