Nortel-Magellan-Passport-FileSystemMIB
AI MIB Summary
Standard SNMP MIB module defining data structures for Nortel-Magellan-Passport-FileSystemMIB.
74
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
74 total| Object Name |
|---|
fileSystemMIB OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.16 |
IMPORTS Unknown .1.3.6.1.4.1.562.2.4.2.16 |
fileSystemGroup OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.16.1 |
fileSystemGroupBD OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.16.1.4 |
fileSystemGroupBD00 OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.16.1.4.1 |
fileSystemGroupBD00A OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.16.1.4.1.2 |
fileSystemCapabilities OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.16.3 |
fileSystemCapabilitiesBD OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.16.3.4 |
fileSystemCapabilitiesBD00 OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.16.3.4.1 |
fileSystemCapabilitiesBD00A OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.16.3.4.1.2 |
fs OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.15 |
fsRowStatusTableThis entry controls the addition and deletion of
fs components. SEQUENCE OF FsRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.15.1 |
fsRowStatusEntryA single entry in the table represents a single
fs component. FsRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.15.1.1 |
fsRowStatusThis variable is used as the basis for SNMP naming of
fs components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.15.1.1.1 |
fsComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.15.1.1.2 |
fsStorageTypeThis variable represents the storage type value for the
fs tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.15.1.1.4 |
fsIndexThis variable represents the index for the fs tables. NonReplicated .1.3.6.1.4.1.3764.1.1.30.15.1.1.10 |
fsDisk OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.15.2 |
fsDiskRowStatusTable*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This entry controls the addition and deletion of
fsDisk components. SEQUENCE OF FsDiskRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.15.2.1 |
fsDiskRowStatusEntryA single entry in the table represents a single
fsDisk component. FsDiskRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.15.2.1.1 |
fsDiskRowStatusThis variable is used as the basis for SNMP naming of
fsDisk components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.15.2.1.1.1 |
fsDiskComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.15.2.1.1.2 |
fsDiskStorageTypeThis variable represents the storage type value for the
fsDisk tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.15.2.1.1.4 |
fsDiskIndexThis variable represents the index for the fsDisk tables. Integer32 .1.3.6.1.4.1.3764.1.1.30.15.2.1.1.10 |
fsDiskTest OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.15.2.2 |
fsDiskTestRowStatusTable*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This entry controls the addition and deletion of
fsDiskTest components. SEQUENCE OF FsDiskTestRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.15.2.2.1 |
fsDiskTestRowStatusEntryA single entry in the table represents a single
fsDiskTest component. FsDiskTestRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.15.2.2.1.1 |
fsDiskTestRowStatusThis variable is used as the basis for SNMP naming of
fsDiskTest components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.15.2.2.1.1.1 |
fsDiskTestComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.15.2.2.1.1.2 |
fsDiskTestStorageTypeThis variable represents the storage type value for the
fsDiskTest tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.15.2.2.1.1.4 |
fsDiskTestIndexThis variable represents the index for the fsDiskTest tables. NonReplicated .1.3.6.1.4.1.3764.1.1.30.15.2.2.1.1.10 |
fsDiskTestStateTable*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. SEQUENCE OF FsDiskTestStateEntry .1.3.6.1.4.1.3764.1.1.30.15.2.2.10 |
fsDiskTestStateEntryAn entry in the fsDiskTestStateTable. FsDiskTestStateEntry .1.3.6.1.4.1.3764.1.1.30.15.2.2.10.1 |
fsDiskTestAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.15.2.2.10.1.1 |
fsDiskTestOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.15.2.2.10.1.2 |
fsDiskTestUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.15.2.2.10.1.3 |
fsDiskTestSetupTable*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This group contains the Test component operational data. The
testCount, duration and type can be set to control the duration and
the test type which will be run. SEQUENCE OF FsDiskTestSetupEntry .1.3.6.1.4.1.3764.1.1.30.15.2.2.11 |
fsDiskTestSetupEntryAn entry in the fsDiskTestSetupTable. FsDiskTestSetupEntry .1.3.6.1.4.1.3764.1.1.30.15.2.2.11.1 |
fsDiskTestTestCountThis attribute indicates the number of times that the test will run.
Note that the test will not run that many times if 'duration' is not
long enough to allow the test to complete. The test will execute at
least one and then stop at the count where duration has just
exceeded.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.15.2.2.11.1.1 |
fsDiskTestDurationThis attribute is the maximum duration (in minutes) that the test
will run. The test can finish in less time if the number of tests, as
recorded by testCount, is reached before this time. A test may take
longer than the specified duration since a test cycle (or pass) is not
interruptible.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.15.2.2.11.1.2 |
fsDiskTestTypeThis attribute is the type of the test to be run. The diskRead test
reads every sector on the disk once and reports bad sectors. The
filesystemCheck does a sanity check and attempts to repair
corruption. The flakyBitDetection test reads every sector on the disk
twice and compares the two read results. The surfaceAnalysis test
writes a magnetically hard to record pattern to the disk and reads
back the pattern to determine the condition of the magnetic surface
of the disk. The surface analysis test destroys all the data and disk
should be formatted afterward.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.15.2.2.11.1.3 |
fsDiskTestResultsTable*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This group contains the results of the test. SEQUENCE OF FsDiskTestResultsEntry .1.3.6.1.4.1.3764.1.1.30.15.2.2.12 |
fsDiskTestResultsEntryAn entry in the fsDiskTestResultsTable. FsDiskTestResultsEntry .1.3.6.1.4.1.3764.1.1.30.15.2.2.12.1 |
fsDiskTestCauseOfTerminationThis attribute records the reason why the test was terminated. The
reasons are:
testCountReached: the test ran the number of times specified in the
attribute testCount and ended normally.
error: the test was terminated by an error that is recorded in the
natureOfError attribute.
neverStarted: the test was never started.
stoppedByOperator: the test was terminated by the Stop command.
testTimeExpired: the duration of the test expired.
testRunning: the test is still running.
unknown: the test terminated for unknown reasons.
internalError: An internal error terminated the test.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.15.2.2.12.1.1 |
fsDiskTestNatureOfErrorThis attribute describes the error found by a test. A logical error can
be fixed by a filesystemCheck test followed eventually by a
synchronization. A media error indicates that a fault in the disk
hardware is suspected. A failedToComplete error indicates that the
test was terminated.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.15.2.2.12.1.2 |
fsDiskTestSeverityThis attribute describes the severity of the error found by a test.
There are three types of severity: no data was lost, data was lost and
hardware problem. If the test found no error(s), this will be reported
as noError. If the test found error(s) but no data was lost, then
noDataLost is reported.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.15.2.2.12.1.3 |
fsDiskTestElapsedTimeThis attribute records the elapsed time (in minutes) since the test
was started.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.15.2.2.12.1.4 |
fsDiskTestTestExecutionCountThe number of times the test had actually run.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.15.2.2.12.1.5 |
fsDiskStateTable*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. SEQUENCE OF FsDiskStateEntry .1.3.6.1.4.1.3764.1.1.30.15.2.10 |
fsDiskStateEntryAn entry in the fsDiskStateTable. FsDiskStateEntry .1.3.6.1.4.1.3764.1.1.30.15.2.10.1 |
fsDiskAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.15.2.10.1.1 |
fsDiskOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.15.2.10.1.2 |
fsDiskUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.15.2.10.1.3 |
fsDiskOperTable*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This group contains the disk component operational data. SEQUENCE OF FsDiskOperEntry .1.3.6.1.4.1.3764.1.1.30.15.2.11 |
fsDiskOperEntryAn entry in the fsDiskOperTable. FsDiskOperEntry .1.3.6.1.4.1.3764.1.1.30.15.2.11.1 |
fsDiskVolumeNameThis attribute describes the volume name of the disk. The volume
names of the two disks must be identical to be synchronized.rw AsciiString .1.3.6.1.4.1.3764.1.1.30.15.2.11.1.1 |
fsDiskCapacityThis attribute describes the total formatted disk size (in bytes) of the
disk.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.15.2.11.1.2 |
fsDiskFreeSpacefreeSpace
This attribute indicates the available free disk space(in bytes) on the
disk. Free space is reduced by bad blocks (if any). If there are
different numbers of bad blocks on the disks in a dual-disk system,
the reported free space will differ on the two disks.
Moreover, due to the DOS file system internal representation of
directories and files, adding and deleting files may fragment the
disks differently resulting in some disk space wasted. A small
discrepancy (less than 1% of the disk size) in the disks free space is
considered as normal.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.15.2.11.1.3 |
fsDiskBadBlocksPercentageThis attribute records the percentage of the disk space lost because
of defects. If this percentage is high, it is recommended to change
the disk.ro Gauge32 .1.3.6.1.4.1.3764.1.1.30.15.2.11.1.4 |
fsDiskUnformattedCapacityunformattedCapacity
This attribute indicates the physical disk size (in bytes). The
physical disk size may be different from the formatted disk size if
there are bad blocks or the disk has been formatted to a smaller disk
size for backward compatibility with older releases.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.15.2.11.1.5 |
fsStateTableThis group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. SEQUENCE OF FsStateEntry .1.3.6.1.4.1.3764.1.1.30.15.10 |
fsStateEntryAn entry in the fsStateTable. FsStateEntry .1.3.6.1.4.1.3764.1.1.30.15.10.1 |
fsAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.15.10.1.1 |
fsOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.15.10.1.2 |
fsUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.15.10.1.3 |
fsOperTableThis group contains the filesystem operational data. SEQUENCE OF FsOperEntry .1.3.6.1.4.1.3764.1.1.30.15.11 |
fsOperEntryAn entry in the fsOperTable. FsOperEntry .1.3.6.1.4.1.3764.1.1.30.15.11.1 |
fsVolumeNameThis attribute describes the volume name of the filesystem. This is
the active disk volume name.ro AsciiString .1.3.6.1.4.1.3764.1.1.30.15.11.1.1 |
fsActiveDiskThe activeDisk attribute value is the Disk component instance value
of the active disk. This is also the card number of the active control
processor.ro RowPointer .1.3.6.1.4.1.3764.1.1.30.15.11.1.2 |
fsSyncStatusThe synchronization status value indicates whether the file system is
synchronized or not.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.15.11.1.3 |
fsSyncProgressThe synchronization progress value indicates the percentage of the
standby disk already synchronized with the active disk. This value
is equal to 100 if the two disks are synchronized or 0 if they are out
of synchronization.ro Gauge32 .1.3.6.1.4.1.3764.1.1.30.15.11.1.4 |
fsCapacityThe Capacity attribute value is the total size of the filesystem (in
bytes). This value is equal to the smallest disk size in a
synchronized filesystem, otherwise it is the capacity of the active
disk.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.15.11.1.5 |
fsFreeSpaceThis attribute describes the free disk space (in bytes) currently
available in the filesystem. It is equal to the smallest free disk space
size of the active and standby disks in a synchronized filesystem.
When the filesystem is unsynchronized it is the free disk space of
the active disk.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.15.11.1.6 |
fsUsageThis attribute describes the percentage of the free space available on
the filesystem.ro Gauge32 .1.3.6.1.4.1.3764.1.1.30.15.11.1.7 |