Nortel-Magellan-Passport-AtmUniMIB
AI MIB Summary
Standard SNMP MIB module defining data structures for Nortel-Magellan-Passport-AtmUniMIB.
253
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
253 total| Object Name |
|---|
atmUniMIB OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.69 |
IMPORTS Unknown .1.3.6.1.4.1.562.2.4.2.69 |
atmUniGroup OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.69.1 |
atmUniGroupBE OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.69.1.5 |
atmUniGroupBE00 OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.69.1.5.1 |
atmUniGroupBE00A OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.69.1.5.1.2 |
atmUniCapabilities OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.69.3 |
atmUniCapabilitiesBE OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.69.3.5 |
atmUniCapabilitiesBE00 OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.69.3.5.1 |
atmUniCapabilitiesBE00A OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.69.3.5.1.2 |
atmIfUni OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.114.6 |
atmIfUniRowStatusTableThis entry controls the addition and deletion of
atmIfUni components. SEQUENCE OF AtmIfUniRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.114.6.1 |
atmIfUniRowStatusEntryA single entry in the table represents a single
atmIfUni component. AtmIfUniRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.114.6.1.1 |
atmIfUniRowStatusThis variable is used as the basis for SNMP naming of
atmIfUni components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.6.1.1.1 |
atmIfUniComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.6.1.1.2 |
atmIfUniStorageTypeThis variable represents the storage type value for the
atmIfUni tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.6.1.1.4 |
atmIfUniIndexThis variable represents the index for the atmIfUni tables. NonReplicated .1.3.6.1.4.1.3764.1.1.30.114.6.1.1.10 |
atmIfUniIlmi OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.114.6.2 |
atmIfUniIlmiRowStatusTableThis entry controls the addition and deletion of
atmIfUniIlmi components. SEQUENCE OF AtmIfUniIlmiRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.114.6.2.1 |
atmIfUniIlmiRowStatusEntryA single entry in the table represents a single
atmIfUniIlmi component. AtmIfUniIlmiRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.114.6.2.1.1 |
atmIfUniIlmiRowStatusThis variable is used as the basis for SNMP naming of
atmIfUniIlmi components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.6.2.1.1.1 |
atmIfUniIlmiComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.6.2.1.1.2 |
atmIfUniIlmiStorageTypeThis variable represents the storage type value for the
atmIfUniIlmi tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.6.2.1.1.4 |
atmIfUniIlmiIndexThis variable represents the index for the atmIfUniIlmi tables. NonReplicated .1.3.6.1.4.1.3764.1.1.30.114.6.2.1.1.10 |
atmIfUniIlmiStateTableThis group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. SEQUENCE OF AtmIfUniIlmiStateEntry .1.3.6.1.4.1.3764.1.1.30.114.6.2.10 |
atmIfUniIlmiStateEntryAn entry in the atmIfUniIlmiStateTable. AtmIfUniIlmiStateEntry .1.3.6.1.4.1.3764.1.1.30.114.6.2.10.1 |
atmIfUniIlmiAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.114.6.2.10.1.1 |
atmIfUniIlmiOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.114.6.2.10.1.2 |
atmIfUniIlmiUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.114.6.2.10.1.3 |
atmIfUniIlmiProvTableThis attribute group contains the provisionable attributes for the Ilmi
component. SEQUENCE OF AtmIfUniIlmiProvEntry .1.3.6.1.4.1.3764.1.1.30.114.6.2.11 |
atmIfUniIlmiProvEntryAn entry in the atmIfUniIlmiProvTable. AtmIfUniIlmiProvEntry .1.3.6.1.4.1.3764.1.1.30.114.6.2.11.1 |
atmIfUniIlmiVciThis attribute identifies the ILMI channel number.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.114.6.2.11.1.1 |
atmIfUniIlmiOperatingModeThis attribute is used to enable/disable the ILMI protocol.
addressRegEnabled indicates that the ILMI address registration
protocol is enabled. addressRegDisabled indicates that the ILMI
address registration protocol is disabled. ilmiDisabled indicates that
all of ILMI is disabled.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.114.6.2.11.1.2 |
atmIfUniIlmiStatsTableThis attribute group contains the statistics for the AtmIlmi
component. SEQUENCE OF AtmIfUniIlmiStatsEntry .1.3.6.1.4.1.3764.1.1.30.114.6.2.12 |
atmIfUniIlmiStatsEntryAn entry in the atmIfUniIlmiStatsTable. AtmIfUniIlmiStatsEntry .1.3.6.1.4.1.3764.1.1.30.114.6.2.12.1 |
atmIfUniIlmiTxPdusThis attribute counts the number of transmitted ILMI PDUs. The
counter wraps to 0 when the maximum value is exceeded.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.114.6.2.12.1.1 |
atmIfUniIlmiRxPdusThis attribute counts the total number of received ILMI PDUs.The
counter wraps to 0 when the maximum value is exceeded.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.114.6.2.12.1.2 |
atmIfUniIlmiRxBadPdusDiscardedThis attribute counts the number of received ILMI PDUs that were
discarded due to invalid SNMP format. The counter wraps to 0
when the maximum value is exceeded.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.114.6.2.12.1.3 |
atmIfUniIlmiPrefixToRegisterTableThis attribute is a list of zero or more addresses. If the side attribute
in the Uni component is set to user, then this attribute must be
empty; if the side attribute is set to network, then this attribute is a
list of prefixes.This attribute represents a list of prefix addresses (26
digits) that are sent to the user side. If no prefixes are entered, then
the nodeAddress attribute in the AtmCallRouter component is used
for address registration. SEQUENCE OF AtmIfUniIlmiPrefixToRegisterEntry .1.3.6.1.4.1.3764.1.1.30.114.6.2.287 |
atmIfUniIlmiPrefixToRegisterEntryAn entry in the atmIfUniIlmiPrefixToRegisterTable. AtmIfUniIlmiPrefixToRegisterEntry .1.3.6.1.4.1.3764.1.1.30.114.6.2.287.1 |
atmIfUniIlmiPrefixToRegisterValueThis variable represents both the value and the index for the
atmIfUniIlmiPrefixToRegisterTable.rw AsciiString .1.3.6.1.4.1.3764.1.1.30.114.6.2.287.1.1 |
atmIfUniIlmiPrefixToRegisterRowStatusThis variable is used to control the addition and deletion
of individual values of the atmIfUniIlmiPrefixToRegisterTable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.6.2.287.1.2 |
atmIfUniIlmiEsiToRegisterTableThis attribute is a list of zero or more addresses. If the side attribute
in the Uni component is set to network, then this attribute must be
an empty list; if the side attribute is set to user, then this attribute is
a list of end system indicators (ESI) addresses (12 hex digits) that
are used to compose addresses to register with the network side. SEQUENCE OF AtmIfUniIlmiEsiToRegisterEntry .1.3.6.1.4.1.3764.1.1.30.114.6.2.288 |
atmIfUniIlmiEsiToRegisterEntryAn entry in the atmIfUniIlmiEsiToRegisterTable. AtmIfUniIlmiEsiToRegisterEntry .1.3.6.1.4.1.3764.1.1.30.114.6.2.288.1 |
atmIfUniIlmiEsiToRegisterValueThis variable represents both the value and the index for the
atmIfUniIlmiEsiToRegisterTable.rw AsciiString .1.3.6.1.4.1.3764.1.1.30.114.6.2.288.1.1 |
atmIfUniIlmiEsiToRegisterRowStatusThis variable is used to control the addition and deletion
of individual values of the atmIfUniIlmiEsiToRegisterTable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.6.2.288.1.2 |
atmIfUniSig OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.114.6.3 |
atmIfUniSigRowStatusTableThis entry controls the addition and deletion of
atmIfUniSig components. SEQUENCE OF AtmIfUniSigRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.114.6.3.1 |
atmIfUniSigRowStatusEntryA single entry in the table represents a single
atmIfUniSig component. AtmIfUniSigRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.114.6.3.1.1 |
atmIfUniSigRowStatusThis variable is used as the basis for SNMP naming of
atmIfUniSig components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.6.3.1.1.1 |
atmIfUniSigComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.6.3.1.1.2 |
atmIfUniSigStorageTypeThis variable represents the storage type value for the
atmIfUniSig tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.6.3.1.1.4 |
atmIfUniSigIndexThis variable represents the index for the atmIfUniSig tables. NonReplicated .1.3.6.1.4.1.3764.1.1.30.114.6.3.1.1.10 |
atmIfUniSigVcd OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.114.6.3.2 |
atmIfUniSigVcdRowStatusTableThis entry controls the addition and deletion of
atmIfUniSigVcd components. SEQUENCE OF AtmIfUniSigVcdRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.114.6.3.2.1 |
atmIfUniSigVcdRowStatusEntryA single entry in the table represents a single
atmIfUniSigVcd component. AtmIfUniSigVcdRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.114.6.3.2.1.1 |
atmIfUniSigVcdRowStatusThis variable is used as the basis for SNMP naming of
atmIfUniSigVcd components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.6.3.2.1.1.1 |
atmIfUniSigVcdComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.6.3.2.1.1.2 |
atmIfUniSigVcdStorageTypeThis variable represents the storage type value for the
atmIfUniSigVcd tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.6.3.2.1.1.4 |
atmIfUniSigVcdIndexThis variable represents the index for the atmIfUniSigVcd tables. NonReplicated .1.3.6.1.4.1.3764.1.1.30.114.6.3.2.1.1.10 |
atmIfUniSigVcdProvTableThis group contains the provisionable traffic attributes for a control
channel. SEQUENCE OF AtmIfUniSigVcdProvEntry .1.3.6.1.4.1.3764.1.1.30.114.6.3.2.10 |
atmIfUniSigVcdProvEntryAn entry in the atmIfUniSigVcdProvTable. AtmIfUniSigVcdProvEntry .1.3.6.1.4.1.3764.1.1.30.114.6.3.2.10.1 |
atmIfUniSigVcdTrafficDescTypeThis attribute specifies the type of traffic management which is
applied to both the transmit and receive direction of this connection
as defined in the ATM Forum. The trafficDescType determines the
number and meaning of the parameters in the trafficDescParm
attribute.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.114.6.3.2.10.1.1 |
atmIfUniSigVcdAtmServiceCategoryThis attribute specifies the ATM service category for both directions
of the connection.
The constantBitRate service category is intended for real time
applications, that is those requiring tightly constrained delay and
delay variation, as would be appropriate for voice and video
applications. The consistent availability of a fixed quantity of
bandwidth is considered appropriate for CBR service. Cells which
are delayed beyond the value specified by CellTransfer Delay are
assumed to be of significantly reduce value to the application.
The rtVariableBitRate service category is intended for real time
applications, that is those requiring tightly constrained delay and
delay variation, as would be appropriate for voice and video
applications. Sources are expected to transmit at a rate which varies
with time. Equivalently, the source can be described as 'bursty'.
Cells which are delayed beyond the value specified by CTD are
assumed to be of significantly reduced value to the application. Real
time VBR service may support statistical multiplexing of real time
sources.
The nrtVariableBitRate service category is intended for non-real
time applications which have bursty traffic characteristics and which
can be characterized in terms of a PCR, SCR, and MBS. For those
cells which are transferred within the traffic contract, the application
expects a low cell loss ratio. For all connections, it expects a bound
on the mean cell transfer delay. Non-real time VBR service may
support statistical multiplexing of connections.
The unspecifiedBitRate service is intended for non-real time
applications; that is, those not requiring tightly constrained delay
and delay variation. UBR sources are expected to be bursty. UBR
service supports a high degree of statistical multiplexing among
sources. UBR service does not specify traffic related service
guarantees. No numerical commitments are made with respect to
the cell loss ratio experienced by a UBR connection, or as to the
cell transfer delay experienced by cells on the connection.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.114.6.3.2.10.1.3 |
atmIfUniSigVcdQosClassThis attribute specifies the quality of service for both the forward
and backward direction for this connection.
Class 1 supports a QOS that meets Service Class A performance
requirements (Circuit emulation, constant bit rate video).
Class 2 supports a QOS that meets Service Class B performance
requirements (Variable bit rate audio and video).
Class 3 supports a QOS that meets Service Class C performance
requirements (Connection-Oriented Data Transfer).
Class 4 supports a QOS that meets Service Class D performance
requirements (Connectionless Data Transfer).
Class 0 is the unspecified bit rate QOS class; no objective is
specified for the performance parameters.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.114.6.3.2.10.1.21 |
atmIfUniSigVcdTrafficShapingThis attribute specifies whether this connection uses traffic shaping
when transmitting traffic to the ATM interface.
When sameAsCa is selected, traffic shaping for this connection is
based on the trafficShaping attribute of the connection's service
category component under the AtmIf CA. If the service category has
traffic shaping enabled, then traffic shaping is enabled for the
connection. Note that enabling traffic shaping may have no effect
under certain cases. These cases are listed in the description of the
trafficShaping operational attribute, which is under the Vcc Tm and
Vpc Tm components.
When disabled is selected, traffic shaping for this connection is
disabled.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.114.6.3.2.10.1.50 |
atmIfUniSigVcdUnshapedTransmitQueueingThis attribute only applies when this connection is unshaped. This
attribute specifies the transmit queueing method for this connection
if it is unshaped. Refer to the unshapedTransmitQueueing attribute
under the AtmIf CA service category subcomponent for more details
on the meaning of this attribute.
When this attribute is set to sameAsCa, the transmit queueing
method for the connection is based on the
unshapedTransmitQueueing attribute of the connection's service
category component under the ConnectionAdministrator.
When this attribute is set to common, transmit traffic on this
unshaped connection is destined for the common queue.
The value sameAsInterface is for migration from previous software
releases, but should no longer be usedrw Enumeration .1.3.6.1.4.1.3764.1.1.30.114.6.3.2.10.1.60 |
atmIfUniSigVcdUsageParameterControlThis attribute specifies whether this connection enforces usage
parameter control when receiving traffic from the ATM interface.
When sameAsCa is selected, UPC for the connection is based on
the usageParameterControl attribute of the connection's service
category component under the ConnectionAdministrator. If the
service category has UPC enabled, then UPC is enabled for the
connection. Note that enabling UPC may have no effect under
certain cases. These cases are listed in the description of the
usageParameterControl operational attribute, which is under the
Vcc Tm or Vpc Tm component.
When disabled is selected, UPC for this connection is disabled.
The value sameAsInterface is for migration from previous software
releases, but should no longer be usedrw Enumeration .1.3.6.1.4.1.3764.1.1.30.114.6.3.2.10.1.70 |
atmIfUniSigVcdTdpTableThis attribute is a vector of five traffic parameters whose meanings
are defined by the trafficDescType attribute. The values of peak cell
rate (PCR), sustained cell rate (SCR) and requested shaping rate are
expressed in cell/s. Maximum burst size (MBS) is expressed in
cells. CDVT is expressed in microseconds. The values of PCR,
SCR, MBS and CDVT are used for connection admission control
(CAC). The value of CDVT is only used for connections where the
atmServiceCategory is constantBitRate. For all other values of
atmServiceCategory, CDVT is ignored. The values of PCR, SCR
and requested shaping rate are used to determine the actual shaping
rate where traffic shaping is enabled.
When trafficDescType is 3, parameter 1 represents the PCR for CLP
equal to 0 and 1 traffic; parameter 4 represents the CDVT; and
parameter 5 represents the requested shaping rate. A non-zero value
in parameter 5 overrides any value in parameter 1. This result is
used as the PCR. Parameter 1 must be non-zero. Parameters 2 and 3
must be zero.
When trafficDescType is 6, parameter 1 represents the PCR for CLP
equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP
equal to 0 and 1 traffic; parameter 3 represents the MBS for CLP
equal to 0 and 1 traffic; parameter 4 represents the CDVT; and
parameter 5 represents the requested shaping rate. A non-zero value
in parameter 5 overrides any value in parameter 1. This result is
used as the PCR. Parameters 1, 2, and 3 must be non-zero.
Parameter 1 must be greater than or equal to parameter 2. Parameter
5 must either be zero (unused) or greater than or equal to parameter
2.
When trafficDescType is 7, parameter 1 represents the PCR for CLP
equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP
equal to 0 with cell discard; parameter 3 represents the MBS for
CLP equal to 0 traffic; parameter 4 represents the CDVT; and
parameter 5 represents the requested shaping rate. A non-zero value
in parameter 5 overrides any value in parameter 1. This result is
used as the PCR. Parameters 1, 2, and 3 must be non-zero.
Parameter 1 must be greater than or equal to parameter 2. Parameter
5 must either be zero (unused) or greater than or equal to parameter
2.
When trafficDescType is 8, parameter 1 represents the PCR for CLP
equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP
equal to 0 traffic with cell tagging; parameter 3 represents the MBS
for CLP equal to 0 traffic; parameter 4 represents the CDVT; and
parameter 5 represents the requested shaping rate. A non-zero value
in parameter 5 overrides any value in parameter 1. This result is
used as the PCR. Parameters 1, 2, and 3 must be non-zero.
Parameter 1 must be greater than or equal to parameter 2. Parameter
5 must either be zero (unused) or greater than or equal to parameter
2.
Whenever it is valid for PCR to be specified, parameter 5 may also
be used to specify a requested shaping rate. A non-zero value in
parameter 5 overrides the value in parameter 1 and is used as the
peak cell rate in calculations of CAC and shaping rate.
For trafficDescType 3 the traffic is shaped at the next rate less than
the PCR.
For trafficDescType 6, 7, and 8, the traffic is shaped at the highest
available rate which is between PCR and SCR. However, if there is
no available shaping rate between PCR and SCR, traffic is shaped at
the next rate above the PCR. SEQUENCE OF AtmIfUniSigVcdTdpEntry .1.3.6.1.4.1.3764.1.1.30.114.6.3.2.387 |
atmIfUniSigVcdTdpEntryAn entry in the atmIfUniSigVcdTdpTable. AtmIfUniSigVcdTdpEntry .1.3.6.1.4.1.3764.1.1.30.114.6.3.2.387.1 |
atmIfUniSigVcdTdpIndexThis variable represents the atmIfUniSigVcdTdpTable
specific index for the atmIfUniSigVcdTdpTable. Integer32 .1.3.6.1.4.1.3764.1.1.30.114.6.3.2.387.1.1 |
atmIfUniSigVcdTdpValueThis variable represents an individual value for the
atmIfUniSigVcdTdpTable.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.114.6.3.2.387.1.2 |
atmIfUniSigProvTableThis attribute group contains the provisionable attributes for the
Signalling component. SEQUENCE OF AtmIfUniSigProvEntry .1.3.6.1.4.1.3764.1.1.30.114.6.3.10 |
atmIfUniSigProvEntryAn entry in the atmIfUniSigProvTable. AtmIfUniSigProvEntry .1.3.6.1.4.1.3764.1.1.30.114.6.3.10.1 |
atmIfUniSigVciThis attribute specifies the signalling channel number.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.114.6.3.10.1.1 |
atmIfUniSigAddressConversionThis attribute specifies the address conversion on the outgoing
signalling PDUs. The options are none, nativeE164, or nsap. The
none option is the default and if this option is chosen then nothing
is done to the address information element (IE) in the outgoing
signalling message. If nativeE164 option is chosen, then only
NSAP encapsulated E.164 addresses with zeros in the ESI are
converted to native E.164 format in the outgoing signalling
message. If the NSAP address is not encapsulated E.164 or the ESI
field is not zeros and the nativeE164 option is chosen, then the call
is cleared. If the nsap option is chosen, then native E.164 addresses
are converted to NSAP E.164 with zeros in the ESI field; otherwise
the address is in NSAP format and is not changed.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.114.6.3.10.1.2 |
atmIfUniSigStateTableThis group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. SEQUENCE OF AtmIfUniSigStateEntry .1.3.6.1.4.1.3764.1.1.30.114.6.3.11 |
atmIfUniSigStateEntryAn entry in the atmIfUniSigStateTable. AtmIfUniSigStateEntry .1.3.6.1.4.1.3764.1.1.30.114.6.3.11.1 |
atmIfUniSigAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.114.6.3.11.1.1 |
atmIfUniSigOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.114.6.3.11.1.2 |
atmIfUniSigUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.114.6.3.11.1.3 |
atmIfUniSigOperTableThis attribute contains the operational attributes for the
AtmSignalling component. SEQUENCE OF AtmIfUniSigOperEntry .1.3.6.1.4.1.3764.1.1.30.114.6.3.12 |
atmIfUniSigOperEntryAn entry in the atmIfUniSigOperTable. AtmIfUniSigOperEntry .1.3.6.1.4.1.3764.1.1.30.114.6.3.12.1 |
atmIfUniSigLastTxCauseCodeThis attribute indicates the cause code in the last transmitted
signalling message that contains the CAUSE information element.
The cause code is used to describe the reason for generating certain
signalling messages.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.114.6.3.12.1.1 |
atmIfUniSigLastTxDiagCodeThis attribute contains the diagnostic code in the last transmitted
signalling message. The diagnostic code is contained in the CAUSE
information element and identifies an information element type or
timer type. The diagnostic code is present only if a procedural error
is detected by the signalling protocol. A diagnostic code is always
accompanied by the cause code. If there is no failure, this attribute
is set to 0.ro Hex .1.3.6.1.4.1.3764.1.1.30.114.6.3.12.1.2 |
atmIfUniSigLastRxCauseCodeThis attribute contains the cause code in the last received signalling
message that contains the CAUSE information element. The cause
code is used to describe the reason for generating certain signalling
messages.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.114.6.3.12.1.3 |
atmIfUniSigLastRxDiagCodeThis attribute contains the diagnostic code in the last received
signalling message. The diagnostic code is contained in the CAUSE
information element and identifies an information element type or
timer type. The diagnostic code is present only if a procedural error
is detected by the signalling protocol. A diagnostic code is always
accompanied by the cause code. If there is no failure, this attribute
is set to 0.ro Hex .1.3.6.1.4.1.3764.1.1.30.114.6.3.12.1.4 |
atmIfUniSigStatsTableThis attribute group contains the statistics associated with the
AtmSignalling component. SEQUENCE OF AtmIfUniSigStatsEntry .1.3.6.1.4.1.3764.1.1.30.114.6.3.13 |
atmIfUniSigStatsEntryAn entry in the atmIfUniSigStatsTable. AtmIfUniSigStatsEntry .1.3.6.1.4.1.3764.1.1.30.114.6.3.13.1 |
atmIfUniSigCurrentConnectionsThis attribute indicates the total number of currently active
connections.roobsolete Counter32 .1.3.6.1.4.1.3764.1.1.30.114.6.3.13.1.1 |
atmIfUniSigPeakConnectionsThis attribute indicates the high water mark of active point-to-
point and point-to-multipoint connections.ro Gauge32 .1.3.6.1.4.1.3764.1.1.30.114.6.3.13.1.2 |
atmIfUniSigSuccessfulConnectionsThis attribute counts the total number of switched point-to-
point and point-to-multipoint connections that were successfully
established. The counter wraps to 0 when the maximum value is
exceeded.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.114.6.3.13.1.3 |
atmIfUniSigFailedConnectionsThis attribute counts the total number of switched connections that
were not successfully established.The counter wraps to 0 when the
maximum value is exceeded.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.114.6.3.13.1.4 |
atmIfUniSigTxPdusThis attribute counts the number of transmitted signalling
PDUs.The counter wraps to 0 when the maximum value is
exceeded.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.114.6.3.13.1.5 |
atmIfUniSigRxPdusThis attribute counts the number of received signalling PDUs.The
counter wraps to 0 when the maximum value is exceeded.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.114.6.3.13.1.6 |
atmIfUniSigCurrentPmpConnectionsThis attribute indicates the number of currently active point-to-
multipoint connections.ro Gauge32 .1.3.6.1.4.1.3764.1.1.30.114.6.3.13.1.7 |
atmIfUniSigPeakPmpConnectionsThis attribute indicates the high water mark of active point-to-
multipoint connections.ro Gauge32 .1.3.6.1.4.1.3764.1.1.30.114.6.3.13.1.8 |
atmIfUniSigSuccessfulPmpConnectionsThis attribute counts the total number of switched point-to-
multipoint connections that were successfully established.
The counter wraps to 0 when the maximum value is
exceeded.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.114.6.3.13.1.9 |
atmIfUniSigFailedPmpConnectionsThis attribute counts the number of switched point-to-
multipoint connections that were not successfully
established.The counter wraps to 0 when the maximum value
is exceeded.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.114.6.3.13.1.10 |
atmIfUniSigNewCurrentConnectionsThis attribute indicates the total number of currently active point-to-
point and point-to-multipoint connections.ro Gauge32 .1.3.6.1.4.1.3764.1.1.30.114.6.3.13.1.11 |
atmIfUniAddr OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.114.6.4 |
atmIfUniAddrRowStatusTableThis entry controls the addition and deletion of
atmIfUniAddr components. SEQUENCE OF AtmIfUniAddrRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.114.6.4.1 |
atmIfUniAddrRowStatusEntryA single entry in the table represents a single
atmIfUniAddr component. AtmIfUniAddrRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.114.6.4.1.1 |
atmIfUniAddrRowStatusThis variable is used as the basis for SNMP naming of
atmIfUniAddr components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.6.4.1.1.1 |
atmIfUniAddrComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.6.4.1.1.2 |
atmIfUniAddrStorageTypeThis variable represents the storage type value for the
atmIfUniAddr tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.6.4.1.1.4 |
atmIfUniAddrAddressIndexThis variable represents an index for the atmIfUniAddr tables. AsciiStringIndex .1.3.6.1.4.1.3764.1.1.30.114.6.4.1.1.10 |
atmIfUniAddrAddressTypeIndexThis variable represents an index for the atmIfUniAddr tables. Enumeration .1.3.6.1.4.1.3764.1.1.30.114.6.4.1.1.11 |
atmIfUniAddrTermSP OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.114.6.4.2 |
atmIfUniAddrTermSPRowStatusTableThis entry controls the addition and deletion of
atmIfUniAddrTermSP components. SEQUENCE OF AtmIfUniAddrTermSPRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.114.6.4.2.1 |
atmIfUniAddrTermSPRowStatusEntryA single entry in the table represents a single
atmIfUniAddrTermSP component. AtmIfUniAddrTermSPRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.114.6.4.2.1.1 |
atmIfUniAddrTermSPRowStatusThis variable is used as the basis for SNMP naming of
atmIfUniAddrTermSP components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.6.4.2.1.1.1 |
atmIfUniAddrTermSPComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.6.4.2.1.1.2 |
atmIfUniAddrTermSPStorageTypeThis variable represents the storage type value for the
atmIfUniAddrTermSP tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.6.4.2.1.1.4 |
atmIfUniAddrTermSPIndexThis variable represents the index for the atmIfUniAddrTermSP tables. NonReplicated .1.3.6.1.4.1.3764.1.1.30.114.6.4.2.1.1.10 |
atmIfUniAddrPnniInfo OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.114.6.4.3 |
atmIfUniAddrPnniInfoRowStatusTableThis entry controls the addition and deletion of
atmIfUniAddrPnniInfo components. SEQUENCE OF AtmIfUniAddrPnniInfoRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.114.6.4.3.1 |
atmIfUniAddrPnniInfoRowStatusEntryA single entry in the table represents a single
atmIfUniAddrPnniInfo component. AtmIfUniAddrPnniInfoRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.114.6.4.3.1.1 |
atmIfUniAddrPnniInfoRowStatusThis variable is used as the basis for SNMP naming of
atmIfUniAddrPnniInfo components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.6.4.3.1.1.1 |
atmIfUniAddrPnniInfoComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.6.4.3.1.1.2 |
atmIfUniAddrPnniInfoStorageTypeThis variable represents the storage type value for the
atmIfUniAddrPnniInfo tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.6.4.3.1.1.4 |
atmIfUniAddrPnniInfoIndexThis variable represents the index for the atmIfUniAddrPnniInfo tables. NonReplicated .1.3.6.1.4.1.3764.1.1.30.114.6.4.3.1.1.10 |
atmIfUniAddrPnniInfoProvTableThis attribute group contains the provisioned attributes relating to
PNNI for a PnniInfo component. SEQUENCE OF AtmIfUniAddrPnniInfoProvEntry .1.3.6.1.4.1.3764.1.1.30.114.6.4.3.10 |
atmIfUniAddrPnniInfoProvEntryAn entry in the atmIfUniAddrPnniInfoProvTable. AtmIfUniAddrPnniInfoProvEntry .1.3.6.1.4.1.3764.1.1.30.114.6.4.3.10.1 |
atmIfUniAddrPnniInfoScopeThis attribute specifies the scope of the ATM address, which is the
highest level up to which this address will be advertised in the
PNNI hierarchy. The scope must be set to a value numerically less
than or equal to the level of the lowest level peer group containing
this node. Setting the scope to 0 will cause the address to be
advertised globally within this PNNI routing domain.rw INTEGER (-1..104) .1.3.6.1.4.1.3764.1.1.30.114.6.4.3.10.1.1 |
atmIfUniAddrPnniInfoReachabilityThis attribute indicates whether the address is internal or exterior.
An internal reachable address is an address of a destination that is
directly attached to the logical node advertising the address. An
exterior reachable address is an address that can be reached
through a PNNI routing domain, but which is not located in that
PNNI routing domain.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.114.6.4.3.10.1.2 |
atmIfUniAddrOperTableThis attribute group contains the operational attributes for the
Address component. SEQUENCE OF AtmIfUniAddrOperEntry .1.3.6.1.4.1.3764.1.1.30.114.6.4.10 |
atmIfUniAddrOperEntryAn entry in the atmIfUniAddrOperTable. AtmIfUniAddrOperEntry .1.3.6.1.4.1.3764.1.1.30.114.6.4.10.1 |
atmIfUniAddrScopeThis attribute indicates the scope of the ATM address, which is the
highest level to which this address will be advertised in the PNNI
hierarchy. If no PnniInfo subcomponent has been provisioned, then
the scope will default to the level of this node in the PNNI
hierarchy. If this node does not participate in a PNNI hierarchy, then
this attribute will have the value of -1.ro INTEGER (-1..104) .1.3.6.1.4.1.3764.1.1.30.114.6.4.10.1.1 |
atmIfUniAddrReachabilityThis attribute indicates whether the address is internal or exterior.
An internal reachable address is an address of a destination that is
directly attached to the logical node advertising the address. An
exterior reachable address is an address that can be reached
through a PNNI routing domain, but which is not located in that
PNNI routing domain.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.114.6.4.10.1.2 |
atmIfUniProvTableThis group contains the provisionable attributes for the Uni
component. SEQUENCE OF AtmIfUniProvEntry .1.3.6.1.4.1.3764.1.1.30.114.6.10 |
atmIfUniProvEntryAn entry in the atmIfUniProvTable. AtmIfUniProvEntry .1.3.6.1.4.1.3764.1.1.30.114.6.10.1 |
atmIfUniVersionThis attribute specifies which specification the UNI complies with.
The options are ATM FORUM 3.0 or ATM FORUM 3.1. If this
attribute is changed then all switched Vcc components in this
interface are cleared due to the fact that the two versions are
incompatible.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.114.6.10.1.1 |
atmIfUniSideThis attribute indicates which side the interface is, user or network.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.114.6.10.1.2 |
atmIfUniSoftPvcRetryPeriodThis attribute represents the time in seconds to wait between call set
up retries. The resolution is to the nearest 10 seconds.
This attribute has been obsoleted and is replaced by the
softPvpAndPvcRetryPeriod attribute.rwobsolete Unsigned32 .1.3.6.1.4.1.3764.1.1.30.114.6.10.1.3 |
atmIfUniSoftPvpAndPvcRetryPeriodThis attribute represents the time in seconds to wait between soft
PVP or soft PVC call setup retries. The resolution is to the nearest
10 seconds.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.114.6.10.1.4 |
atmIfUniSoftPvpAndPvcHoldOffTimeThis attribute specifies how long to hold off retries following a
release or the connection. The resolution is to the nearest 50 ms.rw Unsigned32 (0 | 50..20000) .1.3.6.1.4.1.3764.1.1.30.114.6.10.1.5 |
atmIfUniOperTableThis attribute group contains the operational attributes for the Uni
component. SEQUENCE OF AtmIfUniOperEntry .1.3.6.1.4.1.3764.1.1.30.114.6.11 |
atmIfUniOperEntryAn entry in the atmIfUniOperTable. AtmIfUniOperEntry .1.3.6.1.4.1.3764.1.1.30.114.6.11.1 |
atmIfUniMacAddressThis attribute indicates the MAC address of the port, which is used
for address registration of the user side as the default ESI.ro AsciiString .1.3.6.1.4.1.3764.1.1.30.114.6.11.1.1 |
atmIfUniAcctOptTableThis group contains the provisionable attributes for accounting. SEQUENCE OF AtmIfUniAcctOptEntry .1.3.6.1.4.1.3764.1.1.30.114.6.12 |
atmIfUniAcctOptEntryAn entry in the atmIfUniAcctOptTable. AtmIfUniAcctOptEntry .1.3.6.1.4.1.3764.1.1.30.114.6.12.1 |
atmIfUniAccountCollectionThis attribute is used to turn accounting on or off for SVC and
SPVC connections. It also specifies the reason(s) for which
accounting data is collected: billing, test, study, audit or force.
If the set of reasons is not empty then accounting records will be
generated by this interface in the following situations:
- on a TODA changeover if TODA is enabled;
- every 12 hours (per connection) if TODA is disabled;
- on every call clear (a call record with final cell counts).
If none of the reasons is present, then accounting will be
suppressed.
The reason for collection is recorded in the accounting record, in
the attribute callingCollectReason or calledCollectReason as
appropriate.
Description of bits:
bill(0)
test(1)
study(2)
audit(3)
force(4)rw OCTET STRING .1.3.6.1.4.1.3764.1.1.30.114.6.12.1.1 |
atmIfUniAccountConnectionTypeThis attribute specifies whether accounting records generated by
this interface should be marked as originating, terminating or
intermediate. This attribute, in combination with the direction of the
call, determines the value of attribute connPointType of the
accounting record and may be used by downstream accounting
processes to correlate the records.
If the value is origTerm then records generated for incoming calls
will be marked as originating and records generated for outgoing
calls will be marked as terminating.
If the value is intermediate then records generated for all calls will
be marked as intermediate.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.114.6.12.1.2 |
atmIfUniAccountClassThis attribute specifies the accounting class associated with the
interface. Its meaning is determined by the network operator.
Its value is simply recorded in the accounting records generated by
this interface, in the attribute callingServiceType or
calledServiceType as appropriate.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.114.6.12.1.3 |
atmIfUniServiceExchangeThis attribute specifies the data service exchange associated with
this interface. Its meaning is determined by the network operator.
Its value is simply recorded in the accounting records generated by
this interface, in the attribute callingDse or calledDse as
appropriate.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.114.6.12.1.4 |
atmIfVptUni OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.114.9.8 |
atmIfVptUniRowStatusTableThis entry controls the addition and deletion of
atmIfVptUni components. SEQUENCE OF AtmIfVptUniRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.114.9.8.1 |
atmIfVptUniRowStatusEntryA single entry in the table represents a single
atmIfVptUni component. AtmIfVptUniRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.114.9.8.1.1 |
atmIfVptUniRowStatusThis variable is used as the basis for SNMP naming of
atmIfVptUni components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.9.8.1.1.1 |
atmIfVptUniComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.9.8.1.1.2 |
atmIfVptUniStorageTypeThis variable represents the storage type value for the
atmIfVptUni tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.9.8.1.1.4 |
atmIfVptUniIndexThis variable represents the index for the atmIfVptUni tables. NonReplicated .1.3.6.1.4.1.3764.1.1.30.114.9.8.1.1.10 |
atmIfVptUniSig OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.114.9.8.2 |
atmIfVptUniSigRowStatusTableThis entry controls the addition and deletion of
atmIfVptUniSig components. SEQUENCE OF AtmIfVptUniSigRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.114.9.8.2.1 |
atmIfVptUniSigRowStatusEntryA single entry in the table represents a single
atmIfVptUniSig component. AtmIfVptUniSigRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.114.9.8.2.1.1 |
atmIfVptUniSigRowStatusThis variable is used as the basis for SNMP naming of
atmIfVptUniSig components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.9.8.2.1.1.1 |
atmIfVptUniSigComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.9.8.2.1.1.2 |
atmIfVptUniSigStorageTypeThis variable represents the storage type value for the
atmIfVptUniSig tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.9.8.2.1.1.4 |
atmIfVptUniSigIndexThis variable represents the index for the atmIfVptUniSig tables. NonReplicated .1.3.6.1.4.1.3764.1.1.30.114.9.8.2.1.1.10 |
atmIfVptUniSigVcd OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.114.9.8.2.2 |
atmIfVptUniSigVcdRowStatusTableThis entry controls the addition and deletion of
atmIfVptUniSigVcd components. SEQUENCE OF AtmIfVptUniSigVcdRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.114.9.8.2.2.1 |
atmIfVptUniSigVcdRowStatusEntryA single entry in the table represents a single
atmIfVptUniSigVcd component. AtmIfVptUniSigVcdRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.114.9.8.2.2.1.1 |
atmIfVptUniSigVcdRowStatusThis variable is used as the basis for SNMP naming of
atmIfVptUniSigVcd components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.9.8.2.2.1.1.1 |
atmIfVptUniSigVcdComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.9.8.2.2.1.1.2 |
atmIfVptUniSigVcdStorageTypeThis variable represents the storage type value for the
atmIfVptUniSigVcd tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.9.8.2.2.1.1.4 |
atmIfVptUniSigVcdIndexThis variable represents the index for the atmIfVptUniSigVcd tables. NonReplicated .1.3.6.1.4.1.3764.1.1.30.114.9.8.2.2.1.1.10 |
atmIfVptUniSigVcdProvTableThis group contains the provisionable traffic attributes for a control
channel. SEQUENCE OF AtmIfVptUniSigVcdProvEntry .1.3.6.1.4.1.3764.1.1.30.114.9.8.2.2.10 |
atmIfVptUniSigVcdProvEntryAn entry in the atmIfVptUniSigVcdProvTable. AtmIfVptUniSigVcdProvEntry .1.3.6.1.4.1.3764.1.1.30.114.9.8.2.2.10.1 |
atmIfVptUniSigVcdTrafficDescTypeThis attribute specifies the type of traffic management which is
applied to both the transmit and receive direction of this connection
as defined in the ATM Forum. The trafficDescType determines the
number and meaning of the parameters in the trafficDescParm
attribute.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.114.9.8.2.2.10.1.1 |
atmIfVptUniSigVcdAtmServiceCategoryThis attribute specifies the ATM service category for both directions
of the connection.
The constantBitRate service category is intended for real time
applications, that is those requiring tightly constrained delay and
delay variation, as would be appropriate for voice and video
applications. The consistent availability of a fixed quantity of
bandwidth is considered appropriate for CBR service. Cells which
are delayed beyond the value specified by CellTransfer Delay are
assumed to be of significantly reduce value to the application.
The rtVariableBitRate service category is intended for real time
applications, that is those requiring tightly constrained delay and
delay variation, as would be appropriate for voice and video
applications. Sources are expected to transmit at a rate which varies
with time. Equivalently, the source can be described as 'bursty'.
Cells which are delayed beyond the value specified by CTD are
assumed to be of significantly reduced value to the application. Real
time VBR service may support statistical multiplexing of real time
sources.
The nrtVariableBitRate service category is intended for non-real
time applications which have bursty traffic characteristics and which
can be characterized in terms of a PCR, SCR, and MBS. For those
cells which are transferred within the traffic contract, the application
expects a low cell loss ratio. For all connections, it expects a bound
on the mean cell transfer delay. Non-real time VBR service may
support statistical multiplexing of connections.
The unspecifiedBitRate service is intended for non-real time
applications; that is, those not requiring tightly constrained delay
and delay variation. UBR sources are expected to be bursty. UBR
service supports a high degree of statistical multiplexing among
sources. UBR service does not specify traffic related service
guarantees. No numerical commitments are made with respect to
the cell loss ratio experienced by a UBR connection, or as to the
cell transfer delay experienced by cells on the connection.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.114.9.8.2.2.10.1.3 |
atmIfVptUniSigVcdQosClassThis attribute specifies the quality of service for both the forward
and backward direction for this connection.
Class 1 supports a QOS that meets Service Class A performance
requirements (Circuit emulation, constant bit rate video).
Class 2 supports a QOS that meets Service Class B performance
requirements (Variable bit rate audio and video).
Class 3 supports a QOS that meets Service Class C performance
requirements (Connection-Oriented Data Transfer).
Class 4 supports a QOS that meets Service Class D performance
requirements (Connectionless Data Transfer).
Class 0 is the unspecified bit rate QOS class; no objective is
specified for the performance parameters.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.114.9.8.2.2.10.1.21 |
atmIfVptUniSigVcdTrafficShapingThis attribute specifies whether this connection uses traffic shaping
when transmitting traffic to the ATM interface.
When sameAsCa is selected, traffic shaping for this connection is
based on the trafficShaping attribute of the connection's service
category component under the AtmIf CA. If the service category has
traffic shaping enabled, then traffic shaping is enabled for the
connection. Note that enabling traffic shaping may have no effect
under certain cases. These cases are listed in the description of the
trafficShaping operational attribute, which is under the Vcc Tm and
Vpc Tm components.
When disabled is selected, traffic shaping for this connection is
disabled.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.114.9.8.2.2.10.1.50 |
atmIfVptUniSigVcdUnshapedTransmitQueueingThis attribute only applies when this connection is unshaped. This
attribute specifies the transmit queueing method for this connection
if it is unshaped. Refer to the unshapedTransmitQueueing attribute
under the AtmIf CA service category subcomponent for more details
on the meaning of this attribute.
When this attribute is set to sameAsCa, the transmit queueing
method for the connection is based on the
unshapedTransmitQueueing attribute of the connection's service
category component under the ConnectionAdministrator.
When this attribute is set to common, transmit traffic on this
unshaped connection is destined for the common queue.
The value sameAsInterface is for migration from previous software
releases, but should no longer be usedrw Enumeration .1.3.6.1.4.1.3764.1.1.30.114.9.8.2.2.10.1.60 |
atmIfVptUniSigVcdUsageParameterControlThis attribute specifies whether this connection enforces usage
parameter control when receiving traffic from the ATM interface.
When sameAsCa is selected, UPC for the connection is based on
the usageParameterControl attribute of the connection's service
category component under the ConnectionAdministrator. If the
service category has UPC enabled, then UPC is enabled for the
connection. Note that enabling UPC may have no effect under
certain cases. These cases are listed in the description of the
usageParameterControl operational attribute, which is under the
Vcc Tm or Vpc Tm component.
When disabled is selected, UPC for this connection is disabled.
The value sameAsInterface is for migration from previous software
releases, but should no longer be usedrw Enumeration .1.3.6.1.4.1.3764.1.1.30.114.9.8.2.2.10.1.70 |
atmIfVptUniSigVcdTdpTableThis attribute is a vector of five traffic parameters whose meanings
are defined by the trafficDescType attribute. The values of peak cell
rate (PCR), sustained cell rate (SCR) and requested shaping rate are
expressed in cell/s. Maximum burst size (MBS) is expressed in
cells. CDVT is expressed in microseconds. The values of PCR,
SCR, MBS and CDVT are used for connection admission control
(CAC). The value of CDVT is only used for connections where the
atmServiceCategory is constantBitRate. For all other values of
atmServiceCategory, CDVT is ignored. The values of PCR, SCR
and requested shaping rate are used to determine the actual shaping
rate where traffic shaping is enabled.
When trafficDescType is 3, parameter 1 represents the PCR for CLP
equal to 0 and 1 traffic; parameter 4 represents the CDVT; and
parameter 5 represents the requested shaping rate. A non-zero value
in parameter 5 overrides any value in parameter 1. This result is
used as the PCR. Parameter 1 must be non-zero. Parameters 2 and 3
must be zero.
When trafficDescType is 6, parameter 1 represents the PCR for CLP
equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP
equal to 0 and 1 traffic; parameter 3 represents the MBS for CLP
equal to 0 and 1 traffic; parameter 4 represents the CDVT; and
parameter 5 represents the requested shaping rate. A non-zero value
in parameter 5 overrides any value in parameter 1. This result is
used as the PCR. Parameters 1, 2, and 3 must be non-zero.
Parameter 1 must be greater than or equal to parameter 2. Parameter
5 must either be zero (unused) or greater than or equal to parameter
2.
When trafficDescType is 7, parameter 1 represents the PCR for CLP
equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP
equal to 0 with cell discard; parameter 3 represents the MBS for
CLP equal to 0 traffic; parameter 4 represents the CDVT; and
parameter 5 represents the requested shaping rate. A non-zero value
in parameter 5 overrides any value in parameter 1. This result is
used as the PCR. Parameters 1, 2, and 3 must be non-zero.
Parameter 1 must be greater than or equal to parameter 2. Parameter
5 must either be zero (unused) or greater than or equal to parameter
2.
When trafficDescType is 8, parameter 1 represents the PCR for CLP
equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP
equal to 0 traffic with cell tagging; parameter 3 represents the MBS
for CLP equal to 0 traffic; parameter 4 represents the CDVT; and
parameter 5 represents the requested shaping rate. A non-zero value
in parameter 5 overrides any value in parameter 1. This result is
used as the PCR. Parameters 1, 2, and 3 must be non-zero.
Parameter 1 must be greater than or equal to parameter 2. Parameter
5 must either be zero (unused) or greater than or equal to parameter
2.
Whenever it is valid for PCR to be specified, parameter 5 may also
be used to specify a requested shaping rate. A non-zero value in
parameter 5 overrides the value in parameter 1 and is used as the
peak cell rate in calculations of CAC and shaping rate.
For trafficDescType 3 the traffic is shaped at the next rate less than
the PCR.
For trafficDescType 6, 7, and 8, the traffic is shaped at the highest
available rate which is between PCR and SCR. However, if there is
no available shaping rate between PCR and SCR, traffic is shaped at
the next rate above the PCR. SEQUENCE OF AtmIfVptUniSigVcdTdpEntry .1.3.6.1.4.1.3764.1.1.30.114.9.8.2.2.387 |
atmIfVptUniSigVcdTdpEntryAn entry in the atmIfVptUniSigVcdTdpTable. AtmIfVptUniSigVcdTdpEntry .1.3.6.1.4.1.3764.1.1.30.114.9.8.2.2.387.1 |
atmIfVptUniSigVcdTdpIndexThis variable represents the atmIfVptUniSigVcdTdpTable
specific index for the atmIfVptUniSigVcdTdpTable. Integer32 .1.3.6.1.4.1.3764.1.1.30.114.9.8.2.2.387.1.1 |
atmIfVptUniSigVcdTdpValueThis variable represents an individual value for the
atmIfVptUniSigVcdTdpTable.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.114.9.8.2.2.387.1.2 |
atmIfVptUniSigProvTableThis attribute group contains the provisionable attributes for the
Signalling component. SEQUENCE OF AtmIfVptUniSigProvEntry .1.3.6.1.4.1.3764.1.1.30.114.9.8.2.10 |
atmIfVptUniSigProvEntryAn entry in the atmIfVptUniSigProvTable. AtmIfVptUniSigProvEntry .1.3.6.1.4.1.3764.1.1.30.114.9.8.2.10.1 |
atmIfVptUniSigVciThis attribute specifies the signalling channel number.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.114.9.8.2.10.1.1 |
atmIfVptUniSigAddressConversionThis attribute specifies the address conversion on the outgoing
signalling PDUs. The options are none, nativeE164, or nsap. The
none option is the default and if this option is chosen then nothing
is done to the address information element (IE) in the outgoing
signalling message. If nativeE164 option is chosen, then only
NSAP encapsulated E.164 addresses with zeros in the ESI are
converted to native E.164 format in the outgoing signalling
message. If the NSAP address is not encapsulated E.164 or the ESI
field is not zeros and the nativeE164 option is chosen, then the call
is cleared. If the nsap option is chosen, then native E.164 addresses
are converted to NSAP E.164 with zeros in the ESI field; otherwise
the address is in NSAP format and is not changed.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.114.9.8.2.10.1.2 |
atmIfVptUniSigStateTableThis group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. SEQUENCE OF AtmIfVptUniSigStateEntry .1.3.6.1.4.1.3764.1.1.30.114.9.8.2.11 |
atmIfVptUniSigStateEntryAn entry in the atmIfVptUniSigStateTable. AtmIfVptUniSigStateEntry .1.3.6.1.4.1.3764.1.1.30.114.9.8.2.11.1 |
atmIfVptUniSigAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.114.9.8.2.11.1.1 |
atmIfVptUniSigOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.114.9.8.2.11.1.2 |
atmIfVptUniSigUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.114.9.8.2.11.1.3 |
atmIfVptUniSigOperTableThis attribute contains the operational attributes for the
AtmSignalling component. SEQUENCE OF AtmIfVptUniSigOperEntry .1.3.6.1.4.1.3764.1.1.30.114.9.8.2.12 |
atmIfVptUniSigOperEntryAn entry in the atmIfVptUniSigOperTable. AtmIfVptUniSigOperEntry .1.3.6.1.4.1.3764.1.1.30.114.9.8.2.12.1 |
atmIfVptUniSigLastTxCauseCodeThis attribute indicates the cause code in the last transmitted
signalling message that contains the CAUSE information element.
The cause code is used to describe the reason for generating certain
signalling messages.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.114.9.8.2.12.1.1 |
atmIfVptUniSigLastTxDiagCodeThis attribute contains the diagnostic code in the last transmitted
signalling message. The diagnostic code is contained in the CAUSE
information element and identifies an information element type or
timer type. The diagnostic code is present only if a procedural error
is detected by the signalling protocol. A diagnostic code is always
accompanied by the cause code. If there is no failure, this attribute
is set to 0.ro Hex .1.3.6.1.4.1.3764.1.1.30.114.9.8.2.12.1.2 |
atmIfVptUniSigLastRxCauseCodeThis attribute contains the cause code in the last received signalling
message that contains the CAUSE information element. The cause
code is used to describe the reason for generating certain signalling
messages.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.114.9.8.2.12.1.3 |
atmIfVptUniSigLastRxDiagCodeThis attribute contains the diagnostic code in the last received
signalling message. The diagnostic code is contained in the CAUSE
information element and identifies an information element type or
timer type. The diagnostic code is present only if a procedural error
is detected by the signalling protocol. A diagnostic code is always
accompanied by the cause code. If there is no failure, this attribute
is set to 0.ro Hex .1.3.6.1.4.1.3764.1.1.30.114.9.8.2.12.1.4 |
atmIfVptUniSigStatsTableThis attribute group contains the statistics associated with the
AtmSignalling component. SEQUENCE OF AtmIfVptUniSigStatsEntry .1.3.6.1.4.1.3764.1.1.30.114.9.8.2.13 |
atmIfVptUniSigStatsEntryAn entry in the atmIfVptUniSigStatsTable. AtmIfVptUniSigStatsEntry .1.3.6.1.4.1.3764.1.1.30.114.9.8.2.13.1 |
atmIfVptUniSigCurrentConnectionsThis attribute indicates the total number of currently active
connections.roobsolete Counter32 .1.3.6.1.4.1.3764.1.1.30.114.9.8.2.13.1.1 |
atmIfVptUniSigPeakConnectionsThis attribute indicates the high water mark of active point-to-
point and point-to-multipoint connections.ro Gauge32 .1.3.6.1.4.1.3764.1.1.30.114.9.8.2.13.1.2 |
atmIfVptUniSigSuccessfulConnectionsThis attribute counts the total number of switched point-to-
point and point-to-multipoint connections that were successfully
established. The counter wraps to 0 when the maximum value is
exceeded.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.114.9.8.2.13.1.3 |
atmIfVptUniSigFailedConnectionsThis attribute counts the total number of switched connections that
were not successfully established.The counter wraps to 0 when the
maximum value is exceeded.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.114.9.8.2.13.1.4 |
atmIfVptUniSigTxPdusThis attribute counts the number of transmitted signalling
PDUs.The counter wraps to 0 when the maximum value is
exceeded.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.114.9.8.2.13.1.5 |
atmIfVptUniSigRxPdusThis attribute counts the number of received signalling PDUs.The
counter wraps to 0 when the maximum value is exceeded.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.114.9.8.2.13.1.6 |
atmIfVptUniSigCurrentPmpConnectionsThis attribute indicates the number of currently active point-to-
multipoint connections.ro Gauge32 .1.3.6.1.4.1.3764.1.1.30.114.9.8.2.13.1.7 |
atmIfVptUniSigPeakPmpConnectionsThis attribute indicates the high water mark of active point-to-
multipoint connections.ro Gauge32 .1.3.6.1.4.1.3764.1.1.30.114.9.8.2.13.1.8 |
atmIfVptUniSigSuccessfulPmpConnectionsThis attribute counts the total number of switched point-to-
multipoint connections that were successfully established.
The counter wraps to 0 when the maximum value is
exceeded.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.114.9.8.2.13.1.9 |
atmIfVptUniSigFailedPmpConnectionsThis attribute counts the number of switched point-to-
multipoint connections that were not successfully
established.The counter wraps to 0 when the maximum value
is exceeded.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.114.9.8.2.13.1.10 |
atmIfVptUniSigNewCurrentConnectionsThis attribute indicates the total number of currently active point-to-
point and point-to-multipoint connections.ro Gauge32 .1.3.6.1.4.1.3764.1.1.30.114.9.8.2.13.1.11 |
atmIfVptUniAddr OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.114.9.8.3 |
atmIfVptUniAddrRowStatusTableThis entry controls the addition and deletion of
atmIfVptUniAddr components. SEQUENCE OF AtmIfVptUniAddrRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.114.9.8.3.1 |
atmIfVptUniAddrRowStatusEntryA single entry in the table represents a single
atmIfVptUniAddr component. AtmIfVptUniAddrRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.114.9.8.3.1.1 |
atmIfVptUniAddrRowStatusThis variable is used as the basis for SNMP naming of
atmIfVptUniAddr components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.9.8.3.1.1.1 |
atmIfVptUniAddrComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.9.8.3.1.1.2 |
atmIfVptUniAddrStorageTypeThis variable represents the storage type value for the
atmIfVptUniAddr tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.9.8.3.1.1.4 |
atmIfVptUniAddrAddressIndexThis variable represents an index for the atmIfVptUniAddr tables. AsciiStringIndex .1.3.6.1.4.1.3764.1.1.30.114.9.8.3.1.1.10 |
atmIfVptUniAddrAddressTypeIndexThis variable represents an index for the atmIfVptUniAddr tables. Enumeration .1.3.6.1.4.1.3764.1.1.30.114.9.8.3.1.1.11 |
atmIfVptUniAddrTermSP OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.114.9.8.3.2 |
atmIfVptUniAddrTermSPRowStatusTableThis entry controls the addition and deletion of
atmIfVptUniAddrTermSP components. SEQUENCE OF AtmIfVptUniAddrTermSPRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.114.9.8.3.2.1 |
atmIfVptUniAddrTermSPRowStatusEntryA single entry in the table represents a single
atmIfVptUniAddrTermSP component. AtmIfVptUniAddrTermSPRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.114.9.8.3.2.1.1 |
atmIfVptUniAddrTermSPRowStatusThis variable is used as the basis for SNMP naming of
atmIfVptUniAddrTermSP components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.9.8.3.2.1.1.1 |
atmIfVptUniAddrTermSPComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.9.8.3.2.1.1.2 |
atmIfVptUniAddrTermSPStorageTypeThis variable represents the storage type value for the
atmIfVptUniAddrTermSP tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.9.8.3.2.1.1.4 |
atmIfVptUniAddrTermSPIndexThis variable represents the index for the atmIfVptUniAddrTermSP tables. NonReplicated .1.3.6.1.4.1.3764.1.1.30.114.9.8.3.2.1.1.10 |
atmIfVptUniAddrPnniInfo OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.114.9.8.3.3 |
atmIfVptUniAddrPnniInfoRowStatusTableThis entry controls the addition and deletion of
atmIfVptUniAddrPnniInfo components. SEQUENCE OF AtmIfVptUniAddrPnniInfoRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.114.9.8.3.3.1 |
atmIfVptUniAddrPnniInfoRowStatusEntryA single entry in the table represents a single
atmIfVptUniAddrPnniInfo component. AtmIfVptUniAddrPnniInfoRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.114.9.8.3.3.1.1 |
atmIfVptUniAddrPnniInfoRowStatusThis variable is used as the basis for SNMP naming of
atmIfVptUniAddrPnniInfo components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.9.8.3.3.1.1.1 |
atmIfVptUniAddrPnniInfoComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.9.8.3.3.1.1.2 |
atmIfVptUniAddrPnniInfoStorageTypeThis variable represents the storage type value for the
atmIfVptUniAddrPnniInfo tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.9.8.3.3.1.1.4 |
atmIfVptUniAddrPnniInfoIndexThis variable represents the index for the atmIfVptUniAddrPnniInfo tables. NonReplicated .1.3.6.1.4.1.3764.1.1.30.114.9.8.3.3.1.1.10 |
atmIfVptUniAddrPnniInfoProvTableThis attribute group contains the provisioned attributes relating to
PNNI for a PnniInfo component. SEQUENCE OF AtmIfVptUniAddrPnniInfoProvEntry .1.3.6.1.4.1.3764.1.1.30.114.9.8.3.3.10 |
atmIfVptUniAddrPnniInfoProvEntryAn entry in the atmIfVptUniAddrPnniInfoProvTable. AtmIfVptUniAddrPnniInfoProvEntry .1.3.6.1.4.1.3764.1.1.30.114.9.8.3.3.10.1 |
atmIfVptUniAddrPnniInfoScopeThis attribute specifies the scope of the ATM address, which is the
highest level up to which this address will be advertised in the
PNNI hierarchy. The scope must be set to a value numerically less
than or equal to the level of the lowest level peer group containing
this node. Setting the scope to 0 will cause the address to be
advertised globally within this PNNI routing domain.rw INTEGER (-1..104) .1.3.6.1.4.1.3764.1.1.30.114.9.8.3.3.10.1.1 |
atmIfVptUniAddrPnniInfoReachabilityThis attribute indicates whether the address is internal or exterior.
An internal reachable address is an address of a destination that is
directly attached to the logical node advertising the address. An
exterior reachable address is an address that can be reached
through a PNNI routing domain, but which is not located in that
PNNI routing domain.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.114.9.8.3.3.10.1.2 |
atmIfVptUniAddrOperTableThis attribute group contains the operational attributes for the
Address component. SEQUENCE OF AtmIfVptUniAddrOperEntry .1.3.6.1.4.1.3764.1.1.30.114.9.8.3.10 |
atmIfVptUniAddrOperEntryAn entry in the atmIfVptUniAddrOperTable. AtmIfVptUniAddrOperEntry .1.3.6.1.4.1.3764.1.1.30.114.9.8.3.10.1 |
atmIfVptUniAddrScopeThis attribute indicates the scope of the ATM address, which is the
highest level to which this address will be advertised in the PNNI
hierarchy. If no PnniInfo subcomponent has been provisioned, then
the scope will default to the level of this node in the PNNI
hierarchy. If this node does not participate in a PNNI hierarchy, then
this attribute will have the value of -1.ro INTEGER (-1..104) .1.3.6.1.4.1.3764.1.1.30.114.9.8.3.10.1.1 |
atmIfVptUniAddrReachabilityThis attribute indicates whether the address is internal or exterior.
An internal reachable address is an address of a destination that is
directly attached to the logical node advertising the address. An
exterior reachable address is an address that can be reached
through a PNNI routing domain, but which is not located in that
PNNI routing domain.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.114.9.8.3.10.1.2 |
atmIfVptUniProvTableThis group contains the provisionable attributes for the Uni
component. SEQUENCE OF AtmIfVptUniProvEntry .1.3.6.1.4.1.3764.1.1.30.114.9.8.10 |
atmIfVptUniProvEntryAn entry in the atmIfVptUniProvTable. AtmIfVptUniProvEntry .1.3.6.1.4.1.3764.1.1.30.114.9.8.10.1 |
atmIfVptUniVersionThis attribute specifies which specification the UNI complies with.
The options are ATM FORUM 3.0 or ATM FORUM 3.1. If this
attribute is changed then all switched Vcc components in this
interface are cleared due to the fact that the two versions are
incompatible.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.114.9.8.10.1.1 |
atmIfVptUniSideThis attribute indicates which side the interface is, user or network.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.114.9.8.10.1.2 |
atmIfVptUniSoftPvcRetryPeriodThis attribute represents the time in seconds to wait between call set
up retries. The resolution is to the nearest 10 seconds.
This attribute has been obsoleted and is replaced by the
softPvpAndPvcRetryPeriod attribute.rwobsolete Unsigned32 .1.3.6.1.4.1.3764.1.1.30.114.9.8.10.1.3 |
atmIfVptUniSoftPvpAndPvcRetryPeriodThis attribute represents the time in seconds to wait between soft
PVP or soft PVC call setup retries. The resolution is to the nearest
10 seconds.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.114.9.8.10.1.4 |
atmIfVptUniSoftPvpAndPvcHoldOffTimeThis attribute specifies how long to hold off retries following a
release or the connection. The resolution is to the nearest 50 ms.rw Unsigned32 (0 | 50..20000) .1.3.6.1.4.1.3764.1.1.30.114.9.8.10.1.5 |
atmIfVptUniAcctOptTableThis group contains the provisionable attributes for accounting. SEQUENCE OF AtmIfVptUniAcctOptEntry .1.3.6.1.4.1.3764.1.1.30.114.9.8.11 |
atmIfVptUniAcctOptEntryAn entry in the atmIfVptUniAcctOptTable. AtmIfVptUniAcctOptEntry .1.3.6.1.4.1.3764.1.1.30.114.9.8.11.1 |
atmIfVptUniAccountCollectionThis attribute is used to turn accounting on or off for SVC and
SPVC connections. It also specifies the reason(s) for which
accounting data is collected: billing, test, study, audit or force.
If the set of reasons is not empty then accounting records will be
generated by this interface in the following situations:
- on a TODA changeover if TODA is enabled;
- every 12 hours (per connection) if TODA is disabled;
- on every call clear (a call record with final cell counts).
If none of the reasons is present, then accounting will be
suppressed.
The reason for collection is recorded in the accounting record, in
the attribute callingCollectReason or calledCollectReason as
appropriate.
Description of bits:
bill(0)
test(1)
study(2)
audit(3)
force(4)rw OCTET STRING .1.3.6.1.4.1.3764.1.1.30.114.9.8.11.1.1 |
atmIfVptUniAccountConnectionTypeThis attribute specifies whether accounting records generated by
this interface should be marked as originating, terminating or
intermediate. This attribute, in combination with the direction of the
call, determines the value of attribute connPointType of the
accounting record and may be used by downstream accounting
processes to correlate the records.
If the value is origTerm then records generated for incoming calls
will be marked as originating and records generated for outgoing
calls will be marked as terminating.
If the value is intermediate then records generated for all calls will
be marked as intermediate.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.114.9.8.11.1.2 |
atmIfVptUniAccountClassThis attribute specifies the accounting class associated with the
interface. Its meaning is determined by the network operator.
Its value is simply recorded in the accounting records generated by
this interface, in the attribute callingServiceType or
calledServiceType as appropriate.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.114.9.8.11.1.3 |
atmIfVptUniServiceExchangeThis attribute specifies the data service exchange associated with
this interface. Its meaning is determined by the network operator.
Its value is simply recorded in the accounting records generated by
this interface, in the attribute callingDse or calledDse as
appropriate.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.114.9.8.11.1.4 |
atmIfVptUniVProvTableThis group contains the provisionable attributes for the Uni
component which are specific to virtual UNI interfaces. SEQUENCE OF AtmIfVptUniVProvEntry .1.3.6.1.4.1.3764.1.1.30.114.9.8.12 |
atmIfVptUniVProvEntryAn entry in the atmIfVptUniVProvTable. AtmIfVptUniVProvEntry .1.3.6.1.4.1.3764.1.1.30.114.9.8.12.1 |
atmIfVptUniVpciThis attribute specifies the Virtual Path Connection Identifier
(VPCI) to be used between this signalling entity and its peer. The
VPCI of the peer virtual UNI must have the same value for
switched connections to be set up across the interface.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.114.9.8.12.1.1 |