Nortel-Magellan-Passport-AtmPnniMIB
AI MIB Summary
Standard SNMP MIB module defining data structures for Nortel-Magellan-Passport-AtmPnniMIB.
339
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
339 total| Object Name |
|---|
atmPnniMIB OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.72 |
IMPORTS Unknown .1.3.6.1.4.1.562.2.4.2.72 |
atmPnniGroup OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.72.1 |
atmPnniGroupBE OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.72.1.5 |
atmPnniGroupBE00 OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.72.1.5.1 |
atmPnniGroupBE00A OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.72.1.5.1.2 |
atmPnniCapabilities OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.72.3 |
atmPnniCapabilitiesBE OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.72.3.5 |
atmPnniCapabilitiesBE00 OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.72.3.5.1 |
atmPnniCapabilitiesBE00A OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.72.3.5.1.2 |
atmIfVptPnni OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.114.9.7 |
atmIfVptPnniRowStatusTableThis entry controls the addition and deletion of
atmIfVptPnni components. SEQUENCE OF AtmIfVptPnniRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.114.9.7.1 |
atmIfVptPnniRowStatusEntryA single entry in the table represents a single
atmIfVptPnni component. AtmIfVptPnniRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.114.9.7.1.1 |
atmIfVptPnniRowStatusThis variable is used as the basis for SNMP naming of
atmIfVptPnni components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.9.7.1.1.1 |
atmIfVptPnniComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.9.7.1.1.2 |
atmIfVptPnniStorageTypeThis variable represents the storage type value for the
atmIfVptPnni tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.9.7.1.1.4 |
atmIfVptPnniIndexThis variable represents the index for the atmIfVptPnni tables. NonReplicated .1.3.6.1.4.1.3764.1.1.30.114.9.7.1.1.10 |
atmIfVptPnniSig OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.114.9.7.2 |
atmIfVptPnniSigRowStatusTableThis entry controls the addition and deletion of
atmIfVptPnniSig components. SEQUENCE OF AtmIfVptPnniSigRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.114.9.7.2.1 |
atmIfVptPnniSigRowStatusEntryA single entry in the table represents a single
atmIfVptPnniSig component. AtmIfVptPnniSigRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.114.9.7.2.1.1 |
atmIfVptPnniSigRowStatusThis variable is used as the basis for SNMP naming of
atmIfVptPnniSig components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.9.7.2.1.1.1 |
atmIfVptPnniSigComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.9.7.2.1.1.2 |
atmIfVptPnniSigStorageTypeThis variable represents the storage type value for the
atmIfVptPnniSig tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.9.7.2.1.1.4 |
atmIfVptPnniSigIndexThis variable represents the index for the atmIfVptPnniSig tables. NonReplicated .1.3.6.1.4.1.3764.1.1.30.114.9.7.2.1.1.10 |
atmIfVptPnniSigVcd OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.114.9.7.2.2 |
atmIfVptPnniSigVcdRowStatusTableThis entry controls the addition and deletion of
atmIfVptPnniSigVcd components. SEQUENCE OF AtmIfVptPnniSigVcdRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.114.9.7.2.2.1 |
atmIfVptPnniSigVcdRowStatusEntryA single entry in the table represents a single
atmIfVptPnniSigVcd component. AtmIfVptPnniSigVcdRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.114.9.7.2.2.1.1 |
atmIfVptPnniSigVcdRowStatusThis variable is used as the basis for SNMP naming of
atmIfVptPnniSigVcd components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.9.7.2.2.1.1.1 |
atmIfVptPnniSigVcdComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.9.7.2.2.1.1.2 |
atmIfVptPnniSigVcdStorageTypeThis variable represents the storage type value for the
atmIfVptPnniSigVcd tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.9.7.2.2.1.1.4 |
atmIfVptPnniSigVcdIndexThis variable represents the index for the atmIfVptPnniSigVcd tables. NonReplicated .1.3.6.1.4.1.3764.1.1.30.114.9.7.2.2.1.1.10 |
atmIfVptPnniSigVcdProvTableThis group contains the provisionable traffic attributes for a control
channel. SEQUENCE OF AtmIfVptPnniSigVcdProvEntry .1.3.6.1.4.1.3764.1.1.30.114.9.7.2.2.10 |
atmIfVptPnniSigVcdProvEntryAn entry in the atmIfVptPnniSigVcdProvTable. AtmIfVptPnniSigVcdProvEntry .1.3.6.1.4.1.3764.1.1.30.114.9.7.2.2.10.1 |
atmIfVptPnniSigVcdTrafficDescTypeThis attribute specifies the type of traffic management which is
applied to both the transmit and receive direction of this connection
as defined in the ATM Forum. The trafficDescType determines the
number and meaning of the parameters in the trafficDescParm
attribute.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.114.9.7.2.2.10.1.1 |
atmIfVptPnniSigVcdAtmServiceCategoryThis attribute specifies the ATM service category for both directions
of the connection.
The constantBitRate service category is intended for real time
applications, that is those requiring tightly constrained delay and
delay variation, as would be appropriate for voice and video
applications. The consistent availability of a fixed quantity of
bandwidth is considered appropriate for CBR service. Cells which
are delayed beyond the value specified by CellTransfer Delay are
assumed to be of significantly reduce value to the application.
The rtVariableBitRate service category is intended for real time
applications, that is those requiring tightly constrained delay and
delay variation, as would be appropriate for voice and video
applications. Sources are expected to transmit at a rate which varies
with time. Equivalently, the source can be described as 'bursty'.
Cells which are delayed beyond the value specified by CTD are
assumed to be of significantly reduced value to the application. Real
time VBR service may support statistical multiplexing of real time
sources.
The nrtVariableBitRate service category is intended for non-real
time applications which have bursty traffic characteristics and which
can be characterized in terms of a PCR, SCR, and MBS. For those
cells which are transferred within the traffic contract, the application
expects a low cell loss ratio. For all connections, it expects a bound
on the mean cell transfer delay. Non-real time VBR service may
support statistical multiplexing of connections.
The unspecifiedBitRate service is intended for non-real time
applications; that is, those not requiring tightly constrained delay
and delay variation. UBR sources are expected to be bursty. UBR
service supports a high degree of statistical multiplexing among
sources. UBR service does not specify traffic related service
guarantees. No numerical commitments are made with respect to
the cell loss ratio experienced by a UBR connection, or as to the
cell transfer delay experienced by cells on the connection.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.114.9.7.2.2.10.1.3 |
atmIfVptPnniSigVcdQosClassThis attribute specifies the quality of service for both the forward
and backward direction for this connection.
Class 1 supports a QOS that meets Service Class A performance
requirements (Circuit emulation, constant bit rate video).
Class 2 supports a QOS that meets Service Class B performance
requirements (Variable bit rate audio and video).
Class 3 supports a QOS that meets Service Class C performance
requirements (Connection-Oriented Data Transfer).
Class 4 supports a QOS that meets Service Class D performance
requirements (Connectionless Data Transfer).
Class 0 is the unspecified bit rate QOS class; no objective is
specified for the performance parameters.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.114.9.7.2.2.10.1.21 |
atmIfVptPnniSigVcdTrafficShapingThis attribute specifies whether this connection uses traffic shaping
when transmitting traffic to the ATM interface.
When sameAsCa is selected, traffic shaping for this connection is
based on the trafficShaping attribute of the connection's service
category component under the AtmIf CA. If the service category has
traffic shaping enabled, then traffic shaping is enabled for the
connection. Note that enabling traffic shaping may have no effect
under certain cases. These cases are listed in the description of the
trafficShaping operational attribute, which is under the Vcc Tm and
Vpc Tm components.
When disabled is selected, traffic shaping for this connection is
disabled.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.114.9.7.2.2.10.1.50 |
atmIfVptPnniSigVcdUnshapedTransmitQueueingThis attribute only applies when this connection is unshaped. This
attribute specifies the transmit queueing method for this connection
if it is unshaped. Refer to the unshapedTransmitQueueing attribute
under the AtmIf CA service category subcomponent for more details
on the meaning of this attribute.
When this attribute is set to sameAsCa, the transmit queueing
method for the connection is based on the
unshapedTransmitQueueing attribute of the connection's service
category component under the ConnectionAdministrator.
When this attribute is set to common, transmit traffic on this
unshaped connection is destined for the common queue.
The value sameAsInterface is for migration from previous software
releases, but should no longer be usedrw Enumeration .1.3.6.1.4.1.3764.1.1.30.114.9.7.2.2.10.1.60 |
atmIfVptPnniSigVcdUsageParameterControlThis attribute specifies whether this connection enforces usage
parameter control when receiving traffic from the ATM interface.
When sameAsCa is selected, UPC for the connection is based on
the usageParameterControl attribute of the connection's service
category component under the ConnectionAdministrator. If the
service category has UPC enabled, then UPC is enabled for the
connection. Note that enabling UPC may have no effect under
certain cases. These cases are listed in the description of the
usageParameterControl operational attribute, which is under the
Vcc Tm or Vpc Tm component.
When disabled is selected, UPC for this connection is disabled.
The value sameAsInterface is for migration from previous software
releases, but should no longer be usedrw Enumeration .1.3.6.1.4.1.3764.1.1.30.114.9.7.2.2.10.1.70 |
atmIfVptPnniSigVcdTdpTableThis attribute is a vector of five traffic parameters whose meanings
are defined by the trafficDescType attribute. The values of peak cell
rate (PCR), sustained cell rate (SCR) and requested shaping rate are
expressed in cell/s. Maximum burst size (MBS) is expressed in
cells. CDVT is expressed in microseconds. The values of PCR,
SCR, MBS and CDVT are used for connection admission control
(CAC). The value of CDVT is only used for connections where the
atmServiceCategory is constantBitRate. For all other values of
atmServiceCategory, CDVT is ignored. The values of PCR, SCR
and requested shaping rate are used to determine the actual shaping
rate where traffic shaping is enabled.
When trafficDescType is 3, parameter 1 represents the PCR for CLP
equal to 0 and 1 traffic; parameter 4 represents the CDVT; and
parameter 5 represents the requested shaping rate. A non-zero value
in parameter 5 overrides any value in parameter 1. This result is
used as the PCR. Parameter 1 must be non-zero. Parameters 2 and 3
must be zero.
When trafficDescType is 6, parameter 1 represents the PCR for CLP
equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP
equal to 0 and 1 traffic; parameter 3 represents the MBS for CLP
equal to 0 and 1 traffic; parameter 4 represents the CDVT; and
parameter 5 represents the requested shaping rate. A non-zero value
in parameter 5 overrides any value in parameter 1. This result is
used as the PCR. Parameters 1, 2, and 3 must be non-zero.
Parameter 1 must be greater than or equal to parameter 2. Parameter
5 must either be zero (unused) or greater than or equal to parameter
2.
When trafficDescType is 7, parameter 1 represents the PCR for CLP
equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP
equal to 0 with cell discard; parameter 3 represents the MBS for
CLP equal to 0 traffic; parameter 4 represents the CDVT; and
parameter 5 represents the requested shaping rate. A non-zero value
in parameter 5 overrides any value in parameter 1. This result is
used as the PCR. Parameters 1, 2, and 3 must be non-zero.
Parameter 1 must be greater than or equal to parameter 2. Parameter
5 must either be zero (unused) or greater than or equal to parameter
2.
When trafficDescType is 8, parameter 1 represents the PCR for CLP
equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP
equal to 0 traffic with cell tagging; parameter 3 represents the MBS
for CLP equal to 0 traffic; parameter 4 represents the CDVT; and
parameter 5 represents the requested shaping rate. A non-zero value
in parameter 5 overrides any value in parameter 1. This result is
used as the PCR. Parameters 1, 2, and 3 must be non-zero.
Parameter 1 must be greater than or equal to parameter 2. Parameter
5 must either be zero (unused) or greater than or equal to parameter
2.
Whenever it is valid for PCR to be specified, parameter 5 may also
be used to specify a requested shaping rate. A non-zero value in
parameter 5 overrides the value in parameter 1 and is used as the
peak cell rate in calculations of CAC and shaping rate.
For trafficDescType 3 the traffic is shaped at the next rate less than
the PCR.
For trafficDescType 6, 7, and 8, the traffic is shaped at the highest
available rate which is between PCR and SCR. However, if there is
no available shaping rate between PCR and SCR, traffic is shaped at
the next rate above the PCR. SEQUENCE OF AtmIfVptPnniSigVcdTdpEntry .1.3.6.1.4.1.3764.1.1.30.114.9.7.2.2.387 |
atmIfVptPnniSigVcdTdpEntryAn entry in the atmIfVptPnniSigVcdTdpTable. AtmIfVptPnniSigVcdTdpEntry .1.3.6.1.4.1.3764.1.1.30.114.9.7.2.2.387.1 |
atmIfVptPnniSigVcdTdpIndexThis variable represents the atmIfVptPnniSigVcdTdpTable
specific index for the atmIfVptPnniSigVcdTdpTable. Integer32 .1.3.6.1.4.1.3764.1.1.30.114.9.7.2.2.387.1.1 |
atmIfVptPnniSigVcdTdpValueThis variable represents an individual value for the
atmIfVptPnniSigVcdTdpTable.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.114.9.7.2.2.387.1.2 |
atmIfVptPnniSigProvTableThis attribute group contains the provisionable attributes for the
Signalling component. SEQUENCE OF AtmIfVptPnniSigProvEntry .1.3.6.1.4.1.3764.1.1.30.114.9.7.2.10 |
atmIfVptPnniSigProvEntryAn entry in the atmIfVptPnniSigProvTable. AtmIfVptPnniSigProvEntry .1.3.6.1.4.1.3764.1.1.30.114.9.7.2.10.1 |
atmIfVptPnniSigVciThis attribute specifies the signalling channel number.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.114.9.7.2.10.1.1 |
atmIfVptPnniSigAddressConversionThis attribute specifies the address conversion on the outgoing
signalling PDUs. The options are none, nativeE164, or nsap. The
none option is the default and if this option is chosen then nothing
is done to the address information element (IE) in the outgoing
signalling message. If nativeE164 option is chosen, then only
NSAP encapsulated E.164 addresses with zeros in the ESI are
converted to native E.164 format in the outgoing signalling
message. If the NSAP address is not encapsulated E.164 or the ESI
field is not zeros and the nativeE164 option is chosen, then the call
is cleared. If the nsap option is chosen, then native E.164 addresses
are converted to NSAP E.164 with zeros in the ESI field; otherwise
the address is in NSAP format and is not changed.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.114.9.7.2.10.1.2 |
atmIfVptPnniSigStateTableThis group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. SEQUENCE OF AtmIfVptPnniSigStateEntry .1.3.6.1.4.1.3764.1.1.30.114.9.7.2.11 |
atmIfVptPnniSigStateEntryAn entry in the atmIfVptPnniSigStateTable. AtmIfVptPnniSigStateEntry .1.3.6.1.4.1.3764.1.1.30.114.9.7.2.11.1 |
atmIfVptPnniSigAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.114.9.7.2.11.1.1 |
atmIfVptPnniSigOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.114.9.7.2.11.1.2 |
atmIfVptPnniSigUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.114.9.7.2.11.1.3 |
atmIfVptPnniSigOperTableThis attribute contains the operational attributes for the
AtmSignalling component. SEQUENCE OF AtmIfVptPnniSigOperEntry .1.3.6.1.4.1.3764.1.1.30.114.9.7.2.12 |
atmIfVptPnniSigOperEntryAn entry in the atmIfVptPnniSigOperTable. AtmIfVptPnniSigOperEntry .1.3.6.1.4.1.3764.1.1.30.114.9.7.2.12.1 |
atmIfVptPnniSigLastTxCauseCodeThis attribute indicates the cause code in the last transmitted
signalling message that contains the CAUSE information element.
The cause code is used to describe the reason for generating certain
signalling messages.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.114.9.7.2.12.1.1 |
atmIfVptPnniSigLastTxDiagCodeThis attribute contains the diagnostic code in the last transmitted
signalling message. The diagnostic code is contained in the CAUSE
information element and identifies an information element type or
timer type. The diagnostic code is present only if a procedural error
is detected by the signalling protocol. A diagnostic code is always
accompanied by the cause code. If there is no failure, this attribute
is set to 0.ro Hex .1.3.6.1.4.1.3764.1.1.30.114.9.7.2.12.1.2 |
atmIfVptPnniSigLastRxCauseCodeThis attribute contains the cause code in the last received signalling
message that contains the CAUSE information element. The cause
code is used to describe the reason for generating certain signalling
messages.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.114.9.7.2.12.1.3 |
atmIfVptPnniSigLastRxDiagCodeThis attribute contains the diagnostic code in the last received
signalling message. The diagnostic code is contained in the CAUSE
information element and identifies an information element type or
timer type. The diagnostic code is present only if a procedural error
is detected by the signalling protocol. A diagnostic code is always
accompanied by the cause code. If there is no failure, this attribute
is set to 0.ro Hex .1.3.6.1.4.1.3764.1.1.30.114.9.7.2.12.1.4 |
atmIfVptPnniSigStatsTableThis attribute group contains the statistics associated with the
AtmSignalling component. SEQUENCE OF AtmIfVptPnniSigStatsEntry .1.3.6.1.4.1.3764.1.1.30.114.9.7.2.13 |
atmIfVptPnniSigStatsEntryAn entry in the atmIfVptPnniSigStatsTable. AtmIfVptPnniSigStatsEntry .1.3.6.1.4.1.3764.1.1.30.114.9.7.2.13.1 |
atmIfVptPnniSigCurrentConnectionsThis attribute indicates the total number of currently active
connections.roobsolete Counter32 .1.3.6.1.4.1.3764.1.1.30.114.9.7.2.13.1.1 |
atmIfVptPnniSigPeakConnectionsThis attribute indicates the high water mark of active point-to-
point and point-to-multipoint connections.ro Gauge32 .1.3.6.1.4.1.3764.1.1.30.114.9.7.2.13.1.2 |
atmIfVptPnniSigSuccessfulConnectionsThis attribute counts the total number of switched point-to-
point and point-to-multipoint connections that were successfully
established. The counter wraps to 0 when the maximum value is
exceeded.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.114.9.7.2.13.1.3 |
atmIfVptPnniSigFailedConnectionsThis attribute counts the total number of switched connections that
were not successfully established.The counter wraps to 0 when the
maximum value is exceeded.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.114.9.7.2.13.1.4 |
atmIfVptPnniSigTxPdusThis attribute counts the number of transmitted signalling
PDUs.The counter wraps to 0 when the maximum value is
exceeded.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.114.9.7.2.13.1.5 |
atmIfVptPnniSigRxPdusThis attribute counts the number of received signalling PDUs.The
counter wraps to 0 when the maximum value is exceeded.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.114.9.7.2.13.1.6 |
atmIfVptPnniSigCurrentPmpConnectionsThis attribute indicates the number of currently active point-to-
multipoint connections.ro Gauge32 .1.3.6.1.4.1.3764.1.1.30.114.9.7.2.13.1.7 |
atmIfVptPnniSigPeakPmpConnectionsThis attribute indicates the high water mark of active point-to-
multipoint connections.ro Gauge32 .1.3.6.1.4.1.3764.1.1.30.114.9.7.2.13.1.8 |
atmIfVptPnniSigSuccessfulPmpConnectionsThis attribute counts the total number of switched point-to-
multipoint connections that were successfully established.
The counter wraps to 0 when the maximum value is
exceeded.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.114.9.7.2.13.1.9 |
atmIfVptPnniSigFailedPmpConnectionsThis attribute counts the number of switched point-to-
multipoint connections that were not successfully
established.The counter wraps to 0 when the maximum value
is exceeded.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.114.9.7.2.13.1.10 |
atmIfVptPnniSigNewCurrentConnectionsThis attribute indicates the total number of currently active point-to-
point and point-to-multipoint connections.ro Gauge32 .1.3.6.1.4.1.3764.1.1.30.114.9.7.2.13.1.11 |
atmIfVptPnniRcc OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.114.9.7.3 |
atmIfVptPnniRccRowStatusTableThis entry controls the addition and deletion of
atmIfVptPnniRcc components. SEQUENCE OF AtmIfVptPnniRccRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.114.9.7.3.1 |
atmIfVptPnniRccRowStatusEntryA single entry in the table represents a single
atmIfVptPnniRcc component. AtmIfVptPnniRccRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.114.9.7.3.1.1 |
atmIfVptPnniRccRowStatusThis variable is used as the basis for SNMP naming of
atmIfVptPnniRcc components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.9.7.3.1.1.1 |
atmIfVptPnniRccComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.9.7.3.1.1.2 |
atmIfVptPnniRccStorageTypeThis variable represents the storage type value for the
atmIfVptPnniRcc tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.9.7.3.1.1.4 |
atmIfVptPnniRccIndexThis variable represents the index for the atmIfVptPnniRcc tables. NonReplicated .1.3.6.1.4.1.3764.1.1.30.114.9.7.3.1.1.10 |
atmIfVptPnniRccVcd OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.114.9.7.3.2 |
atmIfVptPnniRccVcdRowStatusTableThis entry controls the addition and deletion of
atmIfVptPnniRccVcd components. SEQUENCE OF AtmIfVptPnniRccVcdRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.114.9.7.3.2.1 |
atmIfVptPnniRccVcdRowStatusEntryA single entry in the table represents a single
atmIfVptPnniRccVcd component. AtmIfVptPnniRccVcdRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.114.9.7.3.2.1.1 |
atmIfVptPnniRccVcdRowStatusThis variable is used as the basis for SNMP naming of
atmIfVptPnniRccVcd components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.9.7.3.2.1.1.1 |
atmIfVptPnniRccVcdComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.9.7.3.2.1.1.2 |
atmIfVptPnniRccVcdStorageTypeThis variable represents the storage type value for the
atmIfVptPnniRccVcd tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.9.7.3.2.1.1.4 |
atmIfVptPnniRccVcdIndexThis variable represents the index for the atmIfVptPnniRccVcd tables. NonReplicated .1.3.6.1.4.1.3764.1.1.30.114.9.7.3.2.1.1.10 |
atmIfVptPnniRccVcdProvTableThis group contains the provisionable traffic attributes for a control
channel. SEQUENCE OF AtmIfVptPnniRccVcdProvEntry .1.3.6.1.4.1.3764.1.1.30.114.9.7.3.2.10 |
atmIfVptPnniRccVcdProvEntryAn entry in the atmIfVptPnniRccVcdProvTable. AtmIfVptPnniRccVcdProvEntry .1.3.6.1.4.1.3764.1.1.30.114.9.7.3.2.10.1 |
atmIfVptPnniRccVcdTrafficDescTypeThis attribute specifies the type of traffic management which is
applied to both the transmit and receive direction of this connection
as defined in the ATM Forum. The trafficDescType determines the
number and meaning of the parameters in the trafficDescParm
attribute.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.114.9.7.3.2.10.1.1 |
atmIfVptPnniRccVcdAtmServiceCategoryThis attribute specifies the ATM service category for both directions
of the connection.
The constantBitRate service category is intended for real time
applications, that is those requiring tightly constrained delay and
delay variation, as would be appropriate for voice and video
applications. The consistent availability of a fixed quantity of
bandwidth is considered appropriate for CBR service. Cells which
are delayed beyond the value specified by CellTransfer Delay are
assumed to be of significantly reduce value to the application.
The rtVariableBitRate service category is intended for real time
applications, that is those requiring tightly constrained delay and
delay variation, as would be appropriate for voice and video
applications. Sources are expected to transmit at a rate which varies
with time. Equivalently, the source can be described as 'bursty'.
Cells which are delayed beyond the value specified by CTD are
assumed to be of significantly reduced value to the application. Real
time VBR service may support statistical multiplexing of real time
sources.
The nrtVariableBitRate service category is intended for non-real
time applications which have bursty traffic characteristics and which
can be characterized in terms of a PCR, SCR, and MBS. For those
cells which are transferred within the traffic contract, the application
expects a low cell loss ratio. For all connections, it expects a bound
on the mean cell transfer delay. Non-real time VBR service may
support statistical multiplexing of connections.
The unspecifiedBitRate service is intended for non-real time
applications; that is, those not requiring tightly constrained delay
and delay variation. UBR sources are expected to be bursty. UBR
service supports a high degree of statistical multiplexing among
sources. UBR service does not specify traffic related service
guarantees. No numerical commitments are made with respect to
the cell loss ratio experienced by a UBR connection, or as to the
cell transfer delay experienced by cells on the connection.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.114.9.7.3.2.10.1.3 |
atmIfVptPnniRccVcdQosClassThis attribute specifies the quality of service for both the forward
and backward direction for this connection.
Class 1 supports a QOS that meets Service Class A performance
requirements (Circuit emulation, constant bit rate video).
Class 2 supports a QOS that meets Service Class B performance
requirements (Variable bit rate audio and video).
Class 3 supports a QOS that meets Service Class C performance
requirements (Connection-Oriented Data Transfer).
Class 4 supports a QOS that meets Service Class D performance
requirements (Connectionless Data Transfer).
Class 0 is the unspecified bit rate QOS class; no objective is
specified for the performance parameters.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.114.9.7.3.2.10.1.21 |
atmIfVptPnniRccVcdTrafficShapingThis attribute specifies whether this connection uses traffic shaping
when transmitting traffic to the ATM interface.
When sameAsCa is selected, traffic shaping for this connection is
based on the trafficShaping attribute of the connection's service
category component under the AtmIf CA. If the service category has
traffic shaping enabled, then traffic shaping is enabled for the
connection. Note that enabling traffic shaping may have no effect
under certain cases. These cases are listed in the description of the
trafficShaping operational attribute, which is under the Vcc Tm and
Vpc Tm components.
When disabled is selected, traffic shaping for this connection is
disabled.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.114.9.7.3.2.10.1.50 |
atmIfVptPnniRccVcdUnshapedTransmitQueueingThis attribute only applies when this connection is unshaped. This
attribute specifies the transmit queueing method for this connection
if it is unshaped. Refer to the unshapedTransmitQueueing attribute
under the AtmIf CA service category subcomponent for more details
on the meaning of this attribute.
When this attribute is set to sameAsCa, the transmit queueing
method for the connection is based on the
unshapedTransmitQueueing attribute of the connection's service
category component under the ConnectionAdministrator.
When this attribute is set to common, transmit traffic on this
unshaped connection is destined for the common queue.
The value sameAsInterface is for migration from previous software
releases, but should no longer be usedrw Enumeration .1.3.6.1.4.1.3764.1.1.30.114.9.7.3.2.10.1.60 |
atmIfVptPnniRccVcdUsageParameterControlThis attribute specifies whether this connection enforces usage
parameter control when receiving traffic from the ATM interface.
When sameAsCa is selected, UPC for the connection is based on
the usageParameterControl attribute of the connection's service
category component under the ConnectionAdministrator. If the
service category has UPC enabled, then UPC is enabled for the
connection. Note that enabling UPC may have no effect under
certain cases. These cases are listed in the description of the
usageParameterControl operational attribute, which is under the
Vcc Tm or Vpc Tm component.
When disabled is selected, UPC for this connection is disabled.
The value sameAsInterface is for migration from previous software
releases, but should no longer be usedrw Enumeration .1.3.6.1.4.1.3764.1.1.30.114.9.7.3.2.10.1.70 |
atmIfVptPnniRccVcdTdpTableThis attribute is a vector of five traffic parameters whose meanings
are defined by the trafficDescType attribute. The values of peak cell
rate (PCR), sustained cell rate (SCR) and requested shaping rate are
expressed in cell/s. Maximum burst size (MBS) is expressed in
cells. CDVT is expressed in microseconds. The values of PCR,
SCR, MBS and CDVT are used for connection admission control
(CAC). The value of CDVT is only used for connections where the
atmServiceCategory is constantBitRate. For all other values of
atmServiceCategory, CDVT is ignored. The values of PCR, SCR
and requested shaping rate are used to determine the actual shaping
rate where traffic shaping is enabled.
When trafficDescType is 3, parameter 1 represents the PCR for CLP
equal to 0 and 1 traffic; parameter 4 represents the CDVT; and
parameter 5 represents the requested shaping rate. A non-zero value
in parameter 5 overrides any value in parameter 1. This result is
used as the PCR. Parameter 1 must be non-zero. Parameters 2 and 3
must be zero.
When trafficDescType is 6, parameter 1 represents the PCR for CLP
equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP
equal to 0 and 1 traffic; parameter 3 represents the MBS for CLP
equal to 0 and 1 traffic; parameter 4 represents the CDVT; and
parameter 5 represents the requested shaping rate. A non-zero value
in parameter 5 overrides any value in parameter 1. This result is
used as the PCR. Parameters 1, 2, and 3 must be non-zero.
Parameter 1 must be greater than or equal to parameter 2. Parameter
5 must either be zero (unused) or greater than or equal to parameter
2.
When trafficDescType is 7, parameter 1 represents the PCR for CLP
equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP
equal to 0 with cell discard; parameter 3 represents the MBS for
CLP equal to 0 traffic; parameter 4 represents the CDVT; and
parameter 5 represents the requested shaping rate. A non-zero value
in parameter 5 overrides any value in parameter 1. This result is
used as the PCR. Parameters 1, 2, and 3 must be non-zero.
Parameter 1 must be greater than or equal to parameter 2. Parameter
5 must either be zero (unused) or greater than or equal to parameter
2.
When trafficDescType is 8, parameter 1 represents the PCR for CLP
equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP
equal to 0 traffic with cell tagging; parameter 3 represents the MBS
for CLP equal to 0 traffic; parameter 4 represents the CDVT; and
parameter 5 represents the requested shaping rate. A non-zero value
in parameter 5 overrides any value in parameter 1. This result is
used as the PCR. Parameters 1, 2, and 3 must be non-zero.
Parameter 1 must be greater than or equal to parameter 2. Parameter
5 must either be zero (unused) or greater than or equal to parameter
2.
Whenever it is valid for PCR to be specified, parameter 5 may also
be used to specify a requested shaping rate. A non-zero value in
parameter 5 overrides the value in parameter 1 and is used as the
peak cell rate in calculations of CAC and shaping rate.
For trafficDescType 3 the traffic is shaped at the next rate less than
the PCR.
For trafficDescType 6, 7, and 8, the traffic is shaped at the highest
available rate which is between PCR and SCR. However, if there is
no available shaping rate between PCR and SCR, traffic is shaped at
the next rate above the PCR. SEQUENCE OF AtmIfVptPnniRccVcdTdpEntry .1.3.6.1.4.1.3764.1.1.30.114.9.7.3.2.387 |
atmIfVptPnniRccVcdTdpEntryAn entry in the atmIfVptPnniRccVcdTdpTable. AtmIfVptPnniRccVcdTdpEntry .1.3.6.1.4.1.3764.1.1.30.114.9.7.3.2.387.1 |
atmIfVptPnniRccVcdTdpIndexThis variable represents the atmIfVptPnniRccVcdTdpTable
specific index for the atmIfVptPnniRccVcdTdpTable. Integer32 .1.3.6.1.4.1.3764.1.1.30.114.9.7.3.2.387.1.1 |
atmIfVptPnniRccVcdTdpValueThis variable represents an individual value for the
atmIfVptPnniRccVcdTdpTable.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.114.9.7.3.2.387.1.2 |
atmIfVptPnniRccProvTableThis group contains the generic provisionable attributes of an Rcc
component. SEQUENCE OF AtmIfVptPnniRccProvEntry .1.3.6.1.4.1.3764.1.1.30.114.9.7.3.10 |
atmIfVptPnniRccProvEntryAn entry in the atmIfVptPnniRccProvTable. AtmIfVptPnniRccProvEntry .1.3.6.1.4.1.3764.1.1.30.114.9.7.3.10.1 |
atmIfVptPnniRccVciThis attribute specifies the VCI for the Routing Control Channel
(RCC). It is not recommended that the value be changed from the
default of 18 unless absolutely necessary. If a different VCI is
specified, ensure that the RCC at the far end is provisioned to use
the same VCI, otherwise the RCC will not come up.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.114.9.7.3.10.1.1 |
atmIfVptPnniRccHlParmsTableThis group contains the provisionable Hello protocol parameters for
an Rcc component. SEQUENCE OF AtmIfVptPnniRccHlParmsEntry .1.3.6.1.4.1.3764.1.1.30.114.9.7.3.11 |
atmIfVptPnniRccHlParmsEntryAn entry in the atmIfVptPnniRccHlParmsTable. AtmIfVptPnniRccHlParmsEntry .1.3.6.1.4.1.3764.1.1.30.114.9.7.3.11.1 |
atmIfVptPnniRccHelloHoldDownThis attribute is used to limit the rate at which this node sends out
Hello packets. Specifically, it specifies the minimum time between
successive Hellos.
A value of 0 specifies that the value provisioned for the
helloHoldDown attribute of the ARtg Pnni component should be
used.rw FixedPoint1 .1.3.6.1.4.1.3764.1.1.30.114.9.7.3.11.1.1 |
atmIfVptPnniRccHelloIntervalThis attribute specifies the duration of the Hello Timer. Every
helloInterval seconds, this node will send out a Hello packet to the
neighbor node, subject to the helloHoldDown timer having expired
at least once since the last Hello packet was sent.
A value of 0 specifies that the value provisioned for the
helloInterval attribute of the ARtg Pnni component should be used.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.114.9.7.3.11.1.2 |
atmIfVptPnniRccHelloInactivityFactorThis attribute specifies the number of Hello intervals allowed to
pass without receiving a Hello from the neighbor node, before an
attempt is made to re-stage. The hello inactivity timer is enabled in
the oneWayInside, twoWayInside, oneWayOutside,
twoWayOutside and commonOutside hello states (see the
helloState attribute on the Rcc component for a description of these
states). Note that the value for the Hello interval used in the
calculation is the one specified in the Hello packet from the
neighbor node.
A value of 0 specifies that the value provisioned for the
helloInactivityFactor attribute of the ARtg Pnni component should
be used.
DESCRIPTIONrw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.114.9.7.3.11.1.3 |
atmIfVptPnniRccStateTableThis group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. SEQUENCE OF AtmIfVptPnniRccStateEntry .1.3.6.1.4.1.3764.1.1.30.114.9.7.3.12 |
atmIfVptPnniRccStateEntryAn entry in the atmIfVptPnniRccStateTable. AtmIfVptPnniRccStateEntry .1.3.6.1.4.1.3764.1.1.30.114.9.7.3.12.1 |
atmIfVptPnniRccAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.114.9.7.3.12.1.1 |
atmIfVptPnniRccOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.114.9.7.3.12.1.2 |
atmIfVptPnniRccUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.114.9.7.3.12.1.3 |
atmIfVptPnniRccOperTableThis group contains the operational attributes for an Rcc
component. SEQUENCE OF AtmIfVptPnniRccOperEntry .1.3.6.1.4.1.3764.1.1.30.114.9.7.3.13 |
atmIfVptPnniRccOperEntryAn entry in the atmIfVptPnniRccOperTable. AtmIfVptPnniRccOperEntry .1.3.6.1.4.1.3764.1.1.30.114.9.7.3.13.1 |
atmIfVptPnniRccTypeThis attribute indicates the role of this link in the PNNI hierarchy.
The following values are possible:
unknown: the Hello protocol has not yet determined the role of the
link.
lowestLevelHorizLink: the link is a horizontal link between two
lowest level nodes.
lowestLevelOutsideLink: the link is an outside link between two
border nodes.
horizontalLinkToLgn: the link is a horizontal link to a Logical
Group Node (LGN).
uplink: the link is a uplink to a higher level LGN.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.114.9.7.3.13.1.1 |
atmIfVptPnniRccNegotiatedVersionThis attribute indicates the PNNI version negotiated with the
neighbor node.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.114.9.7.3.13.1.2 |
atmIfVptPnniRccHelloStateThis attribute indicates the state of the Hello protocol exchange over
this link. The following are the possible values for this attribute:
down: the link is down; no PNNI routing packets will be sent over
or received over such a link. This is the initial state of the Hello
Finite State Machine, and can also be reached when lower-level
protocols have indicated that the link is not usable.
attempt: no Hello packets or Hello packets, with mismatch
information, have been received recently from the neighbor.
Attempts are made to contact the neighbor node by sending out
Hello packets every helloInterval seconds.
oneWayInside: Hello packets have been recently received from the
neighbor and it has been established that both nodes are members of
the same peer group, but the remote node ID and remote port ID in
the neighbor's Hello packets were set to zero. A Hello packet is sent
to the neighbor and the Hello timer is restarted.
twoWayInside: Bidirectional communication over this link between
this node and the neighbor node has been achieved.
oneWayOutside: Hello packets have been recently received from
the neighbor and it has been established that both nodes are
members of a different peer group, but the remote node ID and
remote port ID in the neighbor's Hello packets were set to zero.
twoWayOutside: Hellos have recently been received from the
neighbor indicating that the neighbor node belongs to a different
peer group. The correct remote node ID and remote port ID fields
were included in the Hello packet, but the nodal hierarchy list did
not include any common peer group. This state can also be reached
if a hierarchy mismatch occurs while in the commonOutside state.
commonOutside: A common level of the routing hierarchy has been
found, in addition to achieving full bi-directional communication
between the two nodes.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.114.9.7.3.13.1.3 |
atmIfVptPnniRccRemoteNodeIdThis attribute indicates the neighbor node's node id.ro HexString .1.3.6.1.4.1.3764.1.1.30.114.9.7.3.13.1.4 |
atmIfVptPnniRccRemotePortIdThis attribute indicates the neighbor node's port id.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.114.9.7.3.13.1.5 |
atmIfVptPnniRccStatsTableThis group contains the statistical attributes for an Rcc component. SEQUENCE OF AtmIfVptPnniRccStatsEntry .1.3.6.1.4.1.3764.1.1.30.114.9.7.3.14 |
atmIfVptPnniRccStatsEntryAn entry in the atmIfVptPnniRccStatsTable. AtmIfVptPnniRccStatsEntry .1.3.6.1.4.1.3764.1.1.30.114.9.7.3.14.1 |
atmIfVptPnniRccHelloPacketsRxThis attribute counts the total number of Hello packets received
across this RCC, including bad and mismatched Hello packets. The
counter wraps when it exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.114.9.7.3.14.1.1 |
atmIfVptPnniRccHelloPacketsTxThis attribute counts the total number of Hello packets transmitted
across this RCC. The counter wraps when it exceeds the maximum
value.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.114.9.7.3.14.1.2 |
atmIfVptPnniRccMismatchedHelloPacketsRxThis attribute counts the total number of mismatched Hello packets
received over this RCC. The counter wraps when it exceeds the
maximum value.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.114.9.7.3.14.1.3 |
atmIfVptPnniRccBadHelloPacketsRxThis attribute counts the total number of bad Hello packets received
over this RCC. The counter wraps when it exceeds the maximum
value.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.114.9.7.3.14.1.4 |
atmIfVptPnniAddr OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.114.9.7.4 |
atmIfVptPnniAddrRowStatusTableThis entry controls the addition and deletion of
atmIfVptPnniAddr components. SEQUENCE OF AtmIfVptPnniAddrRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.114.9.7.4.1 |
atmIfVptPnniAddrRowStatusEntryA single entry in the table represents a single
atmIfVptPnniAddr component. AtmIfVptPnniAddrRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.114.9.7.4.1.1 |
atmIfVptPnniAddrRowStatusThis variable is used as the basis for SNMP naming of
atmIfVptPnniAddr components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.9.7.4.1.1.1 |
atmIfVptPnniAddrComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.9.7.4.1.1.2 |
atmIfVptPnniAddrStorageTypeThis variable represents the storage type value for the
atmIfVptPnniAddr tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.9.7.4.1.1.4 |
atmIfVptPnniAddrAddressIndexThis variable represents an index for the atmIfVptPnniAddr tables. AsciiStringIndex .1.3.6.1.4.1.3764.1.1.30.114.9.7.4.1.1.10 |
atmIfVptPnniAddrAddressTypeIndexThis variable represents an index for the atmIfVptPnniAddr tables. Enumeration .1.3.6.1.4.1.3764.1.1.30.114.9.7.4.1.1.11 |
atmIfVptPnniAddrTermSP OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.114.9.7.4.2 |
atmIfVptPnniAddrTermSPRowStatusTableThis entry controls the addition and deletion of
atmIfVptPnniAddrTermSP components. SEQUENCE OF AtmIfVptPnniAddrTermSPRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.114.9.7.4.2.1 |
atmIfVptPnniAddrTermSPRowStatusEntryA single entry in the table represents a single
atmIfVptPnniAddrTermSP component. AtmIfVptPnniAddrTermSPRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.114.9.7.4.2.1.1 |
atmIfVptPnniAddrTermSPRowStatusThis variable is used as the basis for SNMP naming of
atmIfVptPnniAddrTermSP components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.9.7.4.2.1.1.1 |
atmIfVptPnniAddrTermSPComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.9.7.4.2.1.1.2 |
atmIfVptPnniAddrTermSPStorageTypeThis variable represents the storage type value for the
atmIfVptPnniAddrTermSP tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.9.7.4.2.1.1.4 |
atmIfVptPnniAddrTermSPIndexThis variable represents the index for the atmIfVptPnniAddrTermSP tables. NonReplicated .1.3.6.1.4.1.3764.1.1.30.114.9.7.4.2.1.1.10 |
atmIfVptPnniAddrPnniInfo OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.114.9.7.4.3 |
atmIfVptPnniAddrPnniInfoRowStatusTableThis entry controls the addition and deletion of
atmIfVptPnniAddrPnniInfo components. SEQUENCE OF AtmIfVptPnniAddrPnniInfoRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.114.9.7.4.3.1 |
atmIfVptPnniAddrPnniInfoRowStatusEntryA single entry in the table represents a single
atmIfVptPnniAddrPnniInfo component. AtmIfVptPnniAddrPnniInfoRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.114.9.7.4.3.1.1 |
atmIfVptPnniAddrPnniInfoRowStatusThis variable is used as the basis for SNMP naming of
atmIfVptPnniAddrPnniInfo components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.9.7.4.3.1.1.1 |
atmIfVptPnniAddrPnniInfoComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.9.7.4.3.1.1.2 |
atmIfVptPnniAddrPnniInfoStorageTypeThis variable represents the storage type value for the
atmIfVptPnniAddrPnniInfo tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.9.7.4.3.1.1.4 |
atmIfVptPnniAddrPnniInfoIndexThis variable represents the index for the atmIfVptPnniAddrPnniInfo tables. NonReplicated .1.3.6.1.4.1.3764.1.1.30.114.9.7.4.3.1.1.10 |
atmIfVptPnniAddrPnniInfoProvTableThis attribute group contains the provisioned attributes relating to
PNNI for a PnniInfo component. SEQUENCE OF AtmIfVptPnniAddrPnniInfoProvEntry .1.3.6.1.4.1.3764.1.1.30.114.9.7.4.3.10 |
atmIfVptPnniAddrPnniInfoProvEntryAn entry in the atmIfVptPnniAddrPnniInfoProvTable. AtmIfVptPnniAddrPnniInfoProvEntry .1.3.6.1.4.1.3764.1.1.30.114.9.7.4.3.10.1 |
atmIfVptPnniAddrPnniInfoScopeThis attribute specifies the scope of the ATM address, which is the
highest level up to which this address will be advertised in the
PNNI hierarchy. The scope must be set to a value numerically less
than or equal to the level of the lowest level peer group containing
this node. Setting the scope to 0 will cause the address to be
advertised globally within this PNNI routing domain.rw INTEGER (-1..104) .1.3.6.1.4.1.3764.1.1.30.114.9.7.4.3.10.1.1 |
atmIfVptPnniAddrPnniInfoReachabilityThis attribute indicates whether the address is internal or exterior.
An internal reachable address is an address of a destination that is
directly attached to the logical node advertising the address. An
exterior reachable address is an address that can be reached
through a PNNI routing domain, but which is not located in that
PNNI routing domain.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.114.9.7.4.3.10.1.2 |
atmIfVptPnniAddrOperTableThis attribute group contains the operational attributes for the
Address component. SEQUENCE OF AtmIfVptPnniAddrOperEntry .1.3.6.1.4.1.3764.1.1.30.114.9.7.4.10 |
atmIfVptPnniAddrOperEntryAn entry in the atmIfVptPnniAddrOperTable. AtmIfVptPnniAddrOperEntry .1.3.6.1.4.1.3764.1.1.30.114.9.7.4.10.1 |
atmIfVptPnniAddrScopeThis attribute indicates the scope of the ATM address, which is the
highest level to which this address will be advertised in the PNNI
hierarchy. If no PnniInfo subcomponent has been provisioned, then
the scope will default to the level of this node in the PNNI
hierarchy. If this node does not participate in a PNNI hierarchy, then
this attribute will have the value of -1.ro INTEGER (-1..104) .1.3.6.1.4.1.3764.1.1.30.114.9.7.4.10.1.1 |
atmIfVptPnniAddrReachabilityThis attribute indicates whether the address is internal or exterior.
An internal reachable address is an address of a destination that is
directly attached to the logical node advertising the address. An
exterior reachable address is an address that can be reached
through a PNNI routing domain, but which is not located in that
PNNI routing domain.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.114.9.7.4.10.1.2 |
atmIfVptPnniProvTableThis group contains the provisionable attributes for the Pnni
component. SEQUENCE OF AtmIfVptPnniProvEntry .1.3.6.1.4.1.3764.1.1.30.114.9.7.10 |
atmIfVptPnniProvEntryAn entry in the atmIfVptPnniProvTable. AtmIfVptPnniProvEntry .1.3.6.1.4.1.3764.1.1.30.114.9.7.10.1 |
atmIfVptPnniSoftPvcRetryPeriodThis attribute represents the time in seconds to wait between call
setup retries. The resolution is to the nearest 10 seconds.
This attribute has been obsoleted and is replaced by the
softPvpAndPvcRetryPeriod attribute.rwobsolete Unsigned32 .1.3.6.1.4.1.3764.1.1.30.114.9.7.10.1.1 |
atmIfVptPnniSoftPvpAndPvcRetryPeriodThis attribute represents the time in seconds to wait between soft
PVP or soft PVC call setup retries. The resolution is to the nearest
10 seconds.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.114.9.7.10.1.2 |
atmIfVptPnniSoftPvpAndPvcHoldOffTimeThis attribute specifies how long to hold off retries following a
release or the connection. The resolution is to the nearest 50 ms.rw Unsigned32 (0 | 50..20000) .1.3.6.1.4.1.3764.1.1.30.114.9.7.10.1.5 |
atmIfVptPnniAdminWeightsTableThis group contains the provisionable administrative weights for the
Pnni component. These weights will be used by Generic
Connection Admission Control (GCAC) if administrative weight is
the selected optimization criterion. SEQUENCE OF AtmIfVptPnniAdminWeightsEntry .1.3.6.1.4.1.3764.1.1.30.114.9.7.11 |
atmIfVptPnniAdminWeightsEntryAn entry in the atmIfVptPnniAdminWeightsTable. AtmIfVptPnniAdminWeightsEntry .1.3.6.1.4.1.3764.1.1.30.114.9.7.11.1 |
atmIfVptPnniCbrWeightThis attribute specifies the administrative weight assigned for
setting up switched calls with a service category of Constant Bit
Rate (CBR) for this PNNI interface. The value specified will be
used by Generic Connection Admission Control (GCAC) if
administrative weight is the selected optimization criterion; the
higher the value, the less desirable the link will be in path selection.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.114.9.7.11.1.1 |
atmIfVptPnniRtVbrWeightThis attribute specifies the administrative weight assigned for
setting up switched calls with a service category of Real-Time
Variable Bit Rate (RT-VBR) for this PNNI interface. The value
specified will be used by Generic Connection Admission Control
(GCAC) if administrative weight is the selected optimization
criterion; the higher the value, the less desirable the link will be in
path selection.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.114.9.7.11.1.2 |
atmIfVptPnniNrtVbrWeightThis attribute specifies the administrative weight assigned for
setting up switched calls with a service category of Non Real-Time
Variable Bit Rate (NRT-VBR) for this PNNI interface. The value
specified will be used by Generic Connection Admission Control
(GCAC) if administrative weight is the selected optimization
criterion; the higher the value, the less desirable the link will be in
path selection.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.114.9.7.11.1.3 |
atmIfVptPnniUbrWeightThis attribute specifies the administrative weight assigned for
setting up switched calls with a service category of Unspecified Bit
Rate (UBR) for this PNNI interface. The value specified will be
used by Generic Connection Admission Control (GCAC) if
administrative weight is the selected optimization criterion; the
higher the value, the less desirable the link will be in path selection.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.114.9.7.11.1.4 |
atmIfVptPnniAcctOptTableThis group contains the provisionable attributes for accounting. SEQUENCE OF AtmIfVptPnniAcctOptEntry .1.3.6.1.4.1.3764.1.1.30.114.9.7.12 |
atmIfVptPnniAcctOptEntryAn entry in the atmIfVptPnniAcctOptTable. AtmIfVptPnniAcctOptEntry .1.3.6.1.4.1.3764.1.1.30.114.9.7.12.1 |
atmIfVptPnniAccountCollectionThis attribute is used to turn accounting on or off for SVC and
SPVC connections. It also specifies the reason(s) for which
accounting data is collected: billing, test, study, audit, or force.
If the set of reasons is not empty then accounting records will be
generated by this interface in the following situations:
- on a TODA changeover if TODA is enabled;
- every 12 hours (per connection) if TODA is disabled;
- on every call clear (a call record with final cell counts).
If none of the reasons is present, then accounting will be
suppressed.
The reason for collection is recorded in the accounting record, in
the attribute callingCollectReason or calledCollectReason as
appropriate.
Description of bits:
bill(0)
test(1)
study(2)
audit(3)
force(4)rw OCTET STRING .1.3.6.1.4.1.3764.1.1.30.114.9.7.12.1.1 |
atmIfVptPnniAccountConnectionTypeThis attribute specifies whether accounting records generated by
this interface should be marked as originating, terminating or
intermediate. This attribute, in combination with the direction of the
call, determines the value of attribute connPointType of the
accounting record and may be used by downstream accounting
processes to correlate the records.
If the value is origTerm then records generated for incoming calls
will be marked as originating and records generated for outgoing
calls will be marked as terminating.
If the value is intermediate then records generated for all calls will
be marked as intermediate.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.114.9.7.12.1.2 |
atmIfVptPnniAccountClassThis attribute specifies the accounting class associated with the
interface. Its meaning is determined by the network operator.
Its value is simply recorded in the accounting records generated by
this interface, in the attribute callingServiceType or
calledServiceType as appropriate.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.114.9.7.12.1.3 |
atmIfVptPnniServiceExchangeThis attribute specifies the data service exchange associated with
this interface. Its meaning is determined by the network operator.
Its value is simply recorded in the accounting records generated by
this interface, in the attribute callingDse or calledDse as
appropriate.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.114.9.7.12.1.4 |
atmIfVptPnniOperationalTableThis group contains the operational attributes for a Pnni component. SEQUENCE OF AtmIfVptPnniOperationalEntry .1.3.6.1.4.1.3764.1.1.30.114.9.7.13 |
atmIfVptPnniOperationalEntryAn entry in the atmIfVptPnniOperationalTable. AtmIfVptPnniOperationalEntry .1.3.6.1.4.1.3764.1.1.30.114.9.7.13.1 |
atmIfVptPnniPortIdThis attribute indicates the port id of the PNNI interface, which is
the parent AtmIf's instance number.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.114.9.7.13.1.1 |
atmIfVptPnniVProvTableThis group contains the provisionable attributes for the Pnni
component which are specific to virtual PNNI interfaces. SEQUENCE OF AtmIfVptPnniVProvEntry .1.3.6.1.4.1.3764.1.1.30.114.9.7.14 |
atmIfVptPnniVProvEntryAn entry in the atmIfVptPnniVProvTable. AtmIfVptPnniVProvEntry .1.3.6.1.4.1.3764.1.1.30.114.9.7.14.1 |
atmIfVptPnniVpciThis attribute specifies the Virtual Path Connection Identifier
(VPCI) to be used between this signalling entity and its peer. The
VPCI of the peer virtual PNNI must have the same value for
switched connections to be set up across the interface.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.114.9.7.14.1.1 |
atmIfPnni OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.114.96 |
atmIfPnniRowStatusTableThis entry controls the addition and deletion of
atmIfPnni components. SEQUENCE OF AtmIfPnniRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.114.96.1 |
atmIfPnniRowStatusEntryA single entry in the table represents a single
atmIfPnni component. AtmIfPnniRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.114.96.1.1 |
atmIfPnniRowStatusThis variable is used as the basis for SNMP naming of
atmIfPnni components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.96.1.1.1 |
atmIfPnniComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.96.1.1.2 |
atmIfPnniStorageTypeThis variable represents the storage type value for the
atmIfPnni tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.96.1.1.4 |
atmIfPnniIndexThis variable represents the index for the atmIfPnni tables. NonReplicated .1.3.6.1.4.1.3764.1.1.30.114.96.1.1.10 |
atmIfPnniSig OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.114.96.2 |
atmIfPnniSigRowStatusTableThis entry controls the addition and deletion of
atmIfPnniSig components. SEQUENCE OF AtmIfPnniSigRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.114.96.2.1 |
atmIfPnniSigRowStatusEntryA single entry in the table represents a single
atmIfPnniSig component. AtmIfPnniSigRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.114.96.2.1.1 |
atmIfPnniSigRowStatusThis variable is used as the basis for SNMP naming of
atmIfPnniSig components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.96.2.1.1.1 |
atmIfPnniSigComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.96.2.1.1.2 |
atmIfPnniSigStorageTypeThis variable represents the storage type value for the
atmIfPnniSig tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.96.2.1.1.4 |
atmIfPnniSigIndexThis variable represents the index for the atmIfPnniSig tables. NonReplicated .1.3.6.1.4.1.3764.1.1.30.114.96.2.1.1.10 |
atmIfPnniSigVcd OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.114.96.2.2 |
atmIfPnniSigVcdRowStatusTableThis entry controls the addition and deletion of
atmIfPnniSigVcd components. SEQUENCE OF AtmIfPnniSigVcdRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.114.96.2.2.1 |
atmIfPnniSigVcdRowStatusEntryA single entry in the table represents a single
atmIfPnniSigVcd component. AtmIfPnniSigVcdRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.114.96.2.2.1.1 |
atmIfPnniSigVcdRowStatusThis variable is used as the basis for SNMP naming of
atmIfPnniSigVcd components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.96.2.2.1.1.1 |
atmIfPnniSigVcdComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.96.2.2.1.1.2 |
atmIfPnniSigVcdStorageTypeThis variable represents the storage type value for the
atmIfPnniSigVcd tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.96.2.2.1.1.4 |
atmIfPnniSigVcdIndexThis variable represents the index for the atmIfPnniSigVcd tables. NonReplicated .1.3.6.1.4.1.3764.1.1.30.114.96.2.2.1.1.10 |
atmIfPnniSigVcdProvTableThis group contains the provisionable traffic attributes for a control
channel. SEQUENCE OF AtmIfPnniSigVcdProvEntry .1.3.6.1.4.1.3764.1.1.30.114.96.2.2.10 |
atmIfPnniSigVcdProvEntryAn entry in the atmIfPnniSigVcdProvTable. AtmIfPnniSigVcdProvEntry .1.3.6.1.4.1.3764.1.1.30.114.96.2.2.10.1 |
atmIfPnniSigVcdTrafficDescTypeThis attribute specifies the type of traffic management which is
applied to both the transmit and receive direction of this connection
as defined in the ATM Forum. The trafficDescType determines the
number and meaning of the parameters in the trafficDescParm
attribute.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.114.96.2.2.10.1.1 |
atmIfPnniSigVcdAtmServiceCategoryThis attribute specifies the ATM service category for both directions
of the connection.
The constantBitRate service category is intended for real time
applications, that is those requiring tightly constrained delay and
delay variation, as would be appropriate for voice and video
applications. The consistent availability of a fixed quantity of
bandwidth is considered appropriate for CBR service. Cells which
are delayed beyond the value specified by CellTransfer Delay are
assumed to be of significantly reduce value to the application.
The rtVariableBitRate service category is intended for real time
applications, that is those requiring tightly constrained delay and
delay variation, as would be appropriate for voice and video
applications. Sources are expected to transmit at a rate which varies
with time. Equivalently, the source can be described as 'bursty'.
Cells which are delayed beyond the value specified by CTD are
assumed to be of significantly reduced value to the application. Real
time VBR service may support statistical multiplexing of real time
sources.
The nrtVariableBitRate service category is intended for non-real
time applications which have bursty traffic characteristics and which
can be characterized in terms of a PCR, SCR, and MBS. For those
cells which are transferred within the traffic contract, the application
expects a low cell loss ratio. For all connections, it expects a bound
on the mean cell transfer delay. Non-real time VBR service may
support statistical multiplexing of connections.
The unspecifiedBitRate service is intended for non-real time
applications; that is, those not requiring tightly constrained delay
and delay variation. UBR sources are expected to be bursty. UBR
service supports a high degree of statistical multiplexing among
sources. UBR service does not specify traffic related service
guarantees. No numerical commitments are made with respect to
the cell loss ratio experienced by a UBR connection, or as to the
cell transfer delay experienced by cells on the connection.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.114.96.2.2.10.1.3 |
atmIfPnniSigVcdQosClassThis attribute specifies the quality of service for both the forward
and backward direction for this connection.
Class 1 supports a QOS that meets Service Class A performance
requirements (Circuit emulation, constant bit rate video).
Class 2 supports a QOS that meets Service Class B performance
requirements (Variable bit rate audio and video).
Class 3 supports a QOS that meets Service Class C performance
requirements (Connection-Oriented Data Transfer).
Class 4 supports a QOS that meets Service Class D performance
requirements (Connectionless Data Transfer).
Class 0 is the unspecified bit rate QOS class; no objective is
specified for the performance parameters.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.114.96.2.2.10.1.21 |
atmIfPnniSigVcdTrafficShapingThis attribute specifies whether this connection uses traffic shaping
when transmitting traffic to the ATM interface.
When sameAsCa is selected, traffic shaping for this connection is
based on the trafficShaping attribute of the connection's service
category component under the AtmIf CA. If the service category has
traffic shaping enabled, then traffic shaping is enabled for the
connection. Note that enabling traffic shaping may have no effect
under certain cases. These cases are listed in the description of the
trafficShaping operational attribute, which is under the Vcc Tm and
Vpc Tm components.
When disabled is selected, traffic shaping for this connection is
disabled.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.114.96.2.2.10.1.50 |
atmIfPnniSigVcdUnshapedTransmitQueueingThis attribute only applies when this connection is unshaped. This
attribute specifies the transmit queueing method for this connection
if it is unshaped. Refer to the unshapedTransmitQueueing attribute
under the AtmIf CA service category subcomponent for more details
on the meaning of this attribute.
When this attribute is set to sameAsCa, the transmit queueing
method for the connection is based on the
unshapedTransmitQueueing attribute of the connection's service
category component under the ConnectionAdministrator.
When this attribute is set to common, transmit traffic on this
unshaped connection is destined for the common queue.
The value sameAsInterface is for migration from previous software
releases, but should no longer be usedrw Enumeration .1.3.6.1.4.1.3764.1.1.30.114.96.2.2.10.1.60 |
atmIfPnniSigVcdUsageParameterControlThis attribute specifies whether this connection enforces usage
parameter control when receiving traffic from the ATM interface.
When sameAsCa is selected, UPC for the connection is based on
the usageParameterControl attribute of the connection's service
category component under the ConnectionAdministrator. If the
service category has UPC enabled, then UPC is enabled for the
connection. Note that enabling UPC may have no effect under
certain cases. These cases are listed in the description of the
usageParameterControl operational attribute, which is under the
Vcc Tm or Vpc Tm component.
When disabled is selected, UPC for this connection is disabled.
The value sameAsInterface is for migration from previous software
releases, but should no longer be usedrw Enumeration .1.3.6.1.4.1.3764.1.1.30.114.96.2.2.10.1.70 |
atmIfPnniSigVcdTdpTableThis attribute is a vector of five traffic parameters whose meanings
are defined by the trafficDescType attribute. The values of peak cell
rate (PCR), sustained cell rate (SCR) and requested shaping rate are
expressed in cell/s. Maximum burst size (MBS) is expressed in
cells. CDVT is expressed in microseconds. The values of PCR,
SCR, MBS and CDVT are used for connection admission control
(CAC). The value of CDVT is only used for connections where the
atmServiceCategory is constantBitRate. For all other values of
atmServiceCategory, CDVT is ignored. The values of PCR, SCR
and requested shaping rate are used to determine the actual shaping
rate where traffic shaping is enabled.
When trafficDescType is 3, parameter 1 represents the PCR for CLP
equal to 0 and 1 traffic; parameter 4 represents the CDVT; and
parameter 5 represents the requested shaping rate. A non-zero value
in parameter 5 overrides any value in parameter 1. This result is
used as the PCR. Parameter 1 must be non-zero. Parameters 2 and 3
must be zero.
When trafficDescType is 6, parameter 1 represents the PCR for CLP
equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP
equal to 0 and 1 traffic; parameter 3 represents the MBS for CLP
equal to 0 and 1 traffic; parameter 4 represents the CDVT; and
parameter 5 represents the requested shaping rate. A non-zero value
in parameter 5 overrides any value in parameter 1. This result is
used as the PCR. Parameters 1, 2, and 3 must be non-zero.
Parameter 1 must be greater than or equal to parameter 2. Parameter
5 must either be zero (unused) or greater than or equal to parameter
2.
When trafficDescType is 7, parameter 1 represents the PCR for CLP
equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP
equal to 0 with cell discard; parameter 3 represents the MBS for
CLP equal to 0 traffic; parameter 4 represents the CDVT; and
parameter 5 represents the requested shaping rate. A non-zero value
in parameter 5 overrides any value in parameter 1. This result is
used as the PCR. Parameters 1, 2, and 3 must be non-zero.
Parameter 1 must be greater than or equal to parameter 2. Parameter
5 must either be zero (unused) or greater than or equal to parameter
2.
When trafficDescType is 8, parameter 1 represents the PCR for CLP
equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP
equal to 0 traffic with cell tagging; parameter 3 represents the MBS
for CLP equal to 0 traffic; parameter 4 represents the CDVT; and
parameter 5 represents the requested shaping rate. A non-zero value
in parameter 5 overrides any value in parameter 1. This result is
used as the PCR. Parameters 1, 2, and 3 must be non-zero.
Parameter 1 must be greater than or equal to parameter 2. Parameter
5 must either be zero (unused) or greater than or equal to parameter
2.
Whenever it is valid for PCR to be specified, parameter 5 may also
be used to specify a requested shaping rate. A non-zero value in
parameter 5 overrides the value in parameter 1 and is used as the
peak cell rate in calculations of CAC and shaping rate.
For trafficDescType 3 the traffic is shaped at the next rate less than
the PCR.
For trafficDescType 6, 7, and 8, the traffic is shaped at the highest
available rate which is between PCR and SCR. However, if there is
no available shaping rate between PCR and SCR, traffic is shaped at
the next rate above the PCR. SEQUENCE OF AtmIfPnniSigVcdTdpEntry .1.3.6.1.4.1.3764.1.1.30.114.96.2.2.387 |
atmIfPnniSigVcdTdpEntryAn entry in the atmIfPnniSigVcdTdpTable. AtmIfPnniSigVcdTdpEntry .1.3.6.1.4.1.3764.1.1.30.114.96.2.2.387.1 |
atmIfPnniSigVcdTdpIndexThis variable represents the atmIfPnniSigVcdTdpTable
specific index for the atmIfPnniSigVcdTdpTable. Integer32 .1.3.6.1.4.1.3764.1.1.30.114.96.2.2.387.1.1 |
atmIfPnniSigVcdTdpValueThis variable represents an individual value for the
atmIfPnniSigVcdTdpTable.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.114.96.2.2.387.1.2 |
atmIfPnniSigProvTableThis attribute group contains the provisionable attributes for the
Signalling component. SEQUENCE OF AtmIfPnniSigProvEntry .1.3.6.1.4.1.3764.1.1.30.114.96.2.10 |
atmIfPnniSigProvEntryAn entry in the atmIfPnniSigProvTable. AtmIfPnniSigProvEntry .1.3.6.1.4.1.3764.1.1.30.114.96.2.10.1 |
atmIfPnniSigVciThis attribute specifies the signalling channel number.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.114.96.2.10.1.1 |
atmIfPnniSigAddressConversionThis attribute specifies the address conversion on the outgoing
signalling PDUs. The options are none, nativeE164, or nsap. The
none option is the default and if this option is chosen then nothing
is done to the address information element (IE) in the outgoing
signalling message. If nativeE164 option is chosen, then only
NSAP encapsulated E.164 addresses with zeros in the ESI are
converted to native E.164 format in the outgoing signalling
message. If the NSAP address is not encapsulated E.164 or the ESI
field is not zeros and the nativeE164 option is chosen, then the call
is cleared. If the nsap option is chosen, then native E.164 addresses
are converted to NSAP E.164 with zeros in the ESI field; otherwise
the address is in NSAP format and is not changed.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.114.96.2.10.1.2 |
atmIfPnniSigStateTableThis group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. SEQUENCE OF AtmIfPnniSigStateEntry .1.3.6.1.4.1.3764.1.1.30.114.96.2.11 |
atmIfPnniSigStateEntryAn entry in the atmIfPnniSigStateTable. AtmIfPnniSigStateEntry .1.3.6.1.4.1.3764.1.1.30.114.96.2.11.1 |
atmIfPnniSigAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.114.96.2.11.1.1 |
atmIfPnniSigOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.114.96.2.11.1.2 |
atmIfPnniSigUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.114.96.2.11.1.3 |
atmIfPnniSigOperTableThis attribute contains the operational attributes for the
AtmSignalling component. SEQUENCE OF AtmIfPnniSigOperEntry .1.3.6.1.4.1.3764.1.1.30.114.96.2.12 |
atmIfPnniSigOperEntryAn entry in the atmIfPnniSigOperTable. AtmIfPnniSigOperEntry .1.3.6.1.4.1.3764.1.1.30.114.96.2.12.1 |
atmIfPnniSigLastTxCauseCodeThis attribute indicates the cause code in the last transmitted
signalling message that contains the CAUSE information element.
The cause code is used to describe the reason for generating certain
signalling messages.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.114.96.2.12.1.1 |
atmIfPnniSigLastTxDiagCodeThis attribute contains the diagnostic code in the last transmitted
signalling message. The diagnostic code is contained in the CAUSE
information element and identifies an information element type or
timer type. The diagnostic code is present only if a procedural error
is detected by the signalling protocol. A diagnostic code is always
accompanied by the cause code. If there is no failure, this attribute
is set to 0.ro Hex .1.3.6.1.4.1.3764.1.1.30.114.96.2.12.1.2 |
atmIfPnniSigLastRxCauseCodeThis attribute contains the cause code in the last received signalling
message that contains the CAUSE information element. The cause
code is used to describe the reason for generating certain signalling
messages.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.114.96.2.12.1.3 |
atmIfPnniSigLastRxDiagCodeThis attribute contains the diagnostic code in the last received
signalling message. The diagnostic code is contained in the CAUSE
information element and identifies an information element type or
timer type. The diagnostic code is present only if a procedural error
is detected by the signalling protocol. A diagnostic code is always
accompanied by the cause code. If there is no failure, this attribute
is set to 0.ro Hex .1.3.6.1.4.1.3764.1.1.30.114.96.2.12.1.4 |
atmIfPnniSigStatsTableThis attribute group contains the statistics associated with the
AtmSignalling component. SEQUENCE OF AtmIfPnniSigStatsEntry .1.3.6.1.4.1.3764.1.1.30.114.96.2.13 |
atmIfPnniSigStatsEntryAn entry in the atmIfPnniSigStatsTable. AtmIfPnniSigStatsEntry .1.3.6.1.4.1.3764.1.1.30.114.96.2.13.1 |
atmIfPnniSigCurrentConnectionsThis attribute indicates the total number of currently active
connections.roobsolete Counter32 .1.3.6.1.4.1.3764.1.1.30.114.96.2.13.1.1 |
atmIfPnniSigPeakConnectionsThis attribute indicates the high water mark of active point-to-
point and point-to-multipoint connections.ro Gauge32 .1.3.6.1.4.1.3764.1.1.30.114.96.2.13.1.2 |
atmIfPnniSigSuccessfulConnectionsThis attribute counts the total number of switched point-to-
point and point-to-multipoint connections that were successfully
established. The counter wraps to 0 when the maximum value is
exceeded.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.114.96.2.13.1.3 |
atmIfPnniSigFailedConnectionsThis attribute counts the total number of switched connections that
were not successfully established.The counter wraps to 0 when the
maximum value is exceeded.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.114.96.2.13.1.4 |
atmIfPnniSigTxPdusThis attribute counts the number of transmitted signalling
PDUs.The counter wraps to 0 when the maximum value is
exceeded.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.114.96.2.13.1.5 |
atmIfPnniSigRxPdusThis attribute counts the number of received signalling PDUs.The
counter wraps to 0 when the maximum value is exceeded.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.114.96.2.13.1.6 |
atmIfPnniSigCurrentPmpConnectionsThis attribute indicates the number of currently active point-to-
multipoint connections.ro Gauge32 .1.3.6.1.4.1.3764.1.1.30.114.96.2.13.1.7 |
atmIfPnniSigPeakPmpConnectionsThis attribute indicates the high water mark of active point-to-
multipoint connections.ro Gauge32 .1.3.6.1.4.1.3764.1.1.30.114.96.2.13.1.8 |
atmIfPnniSigSuccessfulPmpConnectionsThis attribute counts the total number of switched point-to-
multipoint connections that were successfully established.
The counter wraps to 0 when the maximum value is
exceeded.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.114.96.2.13.1.9 |
atmIfPnniSigFailedPmpConnectionsThis attribute counts the number of switched point-to-
multipoint connections that were not successfully
established.The counter wraps to 0 when the maximum value
is exceeded.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.114.96.2.13.1.10 |
atmIfPnniSigNewCurrentConnectionsThis attribute indicates the total number of currently active point-to-
point and point-to-multipoint connections.ro Gauge32 .1.3.6.1.4.1.3764.1.1.30.114.96.2.13.1.11 |
atmIfPnniRcc OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.114.96.3 |
atmIfPnniRccRowStatusTableThis entry controls the addition and deletion of
atmIfPnniRcc components. SEQUENCE OF AtmIfPnniRccRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.114.96.3.1 |
atmIfPnniRccRowStatusEntryA single entry in the table represents a single
atmIfPnniRcc component. AtmIfPnniRccRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.114.96.3.1.1 |
atmIfPnniRccRowStatusThis variable is used as the basis for SNMP naming of
atmIfPnniRcc components.
These components cannot be added nor deleted.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.96.3.1.1.1 |
atmIfPnniRccComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.96.3.1.1.2 |
atmIfPnniRccStorageTypeThis variable represents the storage type value for the
atmIfPnniRcc tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.96.3.1.1.4 |
atmIfPnniRccIndexThis variable represents the index for the atmIfPnniRcc tables. NonReplicated .1.3.6.1.4.1.3764.1.1.30.114.96.3.1.1.10 |
atmIfPnniRccVcd OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.114.96.3.2 |
atmIfPnniRccVcdRowStatusTableThis entry controls the addition and deletion of
atmIfPnniRccVcd components. SEQUENCE OF AtmIfPnniRccVcdRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.114.96.3.2.1 |
atmIfPnniRccVcdRowStatusEntryA single entry in the table represents a single
atmIfPnniRccVcd component. AtmIfPnniRccVcdRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.114.96.3.2.1.1 |
atmIfPnniRccVcdRowStatusThis variable is used as the basis for SNMP naming of
atmIfPnniRccVcd components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.96.3.2.1.1.1 |
atmIfPnniRccVcdComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.96.3.2.1.1.2 |
atmIfPnniRccVcdStorageTypeThis variable represents the storage type value for the
atmIfPnniRccVcd tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.96.3.2.1.1.4 |
atmIfPnniRccVcdIndexThis variable represents the index for the atmIfPnniRccVcd tables. NonReplicated .1.3.6.1.4.1.3764.1.1.30.114.96.3.2.1.1.10 |
atmIfPnniRccVcdProvTableThis group contains the provisionable traffic attributes for a control
channel. SEQUENCE OF AtmIfPnniRccVcdProvEntry .1.3.6.1.4.1.3764.1.1.30.114.96.3.2.10 |
atmIfPnniRccVcdProvEntryAn entry in the atmIfPnniRccVcdProvTable. AtmIfPnniRccVcdProvEntry .1.3.6.1.4.1.3764.1.1.30.114.96.3.2.10.1 |
atmIfPnniRccVcdTrafficDescTypeThis attribute specifies the type of traffic management which is
applied to both the transmit and receive direction of this connection
as defined in the ATM Forum. The trafficDescType determines the
number and meaning of the parameters in the trafficDescParm
attribute.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.114.96.3.2.10.1.1 |
atmIfPnniRccVcdAtmServiceCategoryThis attribute specifies the ATM service category for both directions
of the connection.
The constantBitRate service category is intended for real time
applications, that is those requiring tightly constrained delay and
delay variation, as would be appropriate for voice and video
applications. The consistent availability of a fixed quantity of
bandwidth is considered appropriate for CBR service. Cells which
are delayed beyond the value specified by CellTransfer Delay are
assumed to be of significantly reduce value to the application.
The rtVariableBitRate service category is intended for real time
applications, that is those requiring tightly constrained delay and
delay variation, as would be appropriate for voice and video
applications. Sources are expected to transmit at a rate which varies
with time. Equivalently, the source can be described as 'bursty'.
Cells which are delayed beyond the value specified by CTD are
assumed to be of significantly reduced value to the application. Real
time VBR service may support statistical multiplexing of real time
sources.
The nrtVariableBitRate service category is intended for non-real
time applications which have bursty traffic characteristics and which
can be characterized in terms of a PCR, SCR, and MBS. For those
cells which are transferred within the traffic contract, the application
expects a low cell loss ratio. For all connections, it expects a bound
on the mean cell transfer delay. Non-real time VBR service may
support statistical multiplexing of connections.
The unspecifiedBitRate service is intended for non-real time
applications; that is, those not requiring tightly constrained delay
and delay variation. UBR sources are expected to be bursty. UBR
service supports a high degree of statistical multiplexing among
sources. UBR service does not specify traffic related service
guarantees. No numerical commitments are made with respect to
the cell loss ratio experienced by a UBR connection, or as to the
cell transfer delay experienced by cells on the connection.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.114.96.3.2.10.1.3 |
atmIfPnniRccVcdQosClassThis attribute specifies the quality of service for both the forward
and backward direction for this connection.
Class 1 supports a QOS that meets Service Class A performance
requirements (Circuit emulation, constant bit rate video).
Class 2 supports a QOS that meets Service Class B performance
requirements (Variable bit rate audio and video).
Class 3 supports a QOS that meets Service Class C performance
requirements (Connection-Oriented Data Transfer).
Class 4 supports a QOS that meets Service Class D performance
requirements (Connectionless Data Transfer).
Class 0 is the unspecified bit rate QOS class; no objective is
specified for the performance parameters.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.114.96.3.2.10.1.21 |
atmIfPnniRccVcdTrafficShapingThis attribute specifies whether this connection uses traffic shaping
when transmitting traffic to the ATM interface.
When sameAsCa is selected, traffic shaping for this connection is
based on the trafficShaping attribute of the connection's service
category component under the AtmIf CA. If the service category has
traffic shaping enabled, then traffic shaping is enabled for the
connection. Note that enabling traffic shaping may have no effect
under certain cases. These cases are listed in the description of the
trafficShaping operational attribute, which is under the Vcc Tm and
Vpc Tm components.
When disabled is selected, traffic shaping for this connection is
disabled.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.114.96.3.2.10.1.50 |
atmIfPnniRccVcdUnshapedTransmitQueueingThis attribute only applies when this connection is unshaped. This
attribute specifies the transmit queueing method for this connection
if it is unshaped. Refer to the unshapedTransmitQueueing attribute
under the AtmIf CA service category subcomponent for more details
on the meaning of this attribute.
When this attribute is set to sameAsCa, the transmit queueing
method for the connection is based on the
unshapedTransmitQueueing attribute of the connection's service
category component under the ConnectionAdministrator.
When this attribute is set to common, transmit traffic on this
unshaped connection is destined for the common queue.
The value sameAsInterface is for migration from previous software
releases, but should no longer be usedrw Enumeration .1.3.6.1.4.1.3764.1.1.30.114.96.3.2.10.1.60 |
atmIfPnniRccVcdUsageParameterControlThis attribute specifies whether this connection enforces usage
parameter control when receiving traffic from the ATM interface.
When sameAsCa is selected, UPC for the connection is based on
the usageParameterControl attribute of the connection's service
category component under the ConnectionAdministrator. If the
service category has UPC enabled, then UPC is enabled for the
connection. Note that enabling UPC may have no effect under
certain cases. These cases are listed in the description of the
usageParameterControl operational attribute, which is under the
Vcc Tm or Vpc Tm component.
When disabled is selected, UPC for this connection is disabled.
The value sameAsInterface is for migration from previous software
releases, but should no longer be usedrw Enumeration .1.3.6.1.4.1.3764.1.1.30.114.96.3.2.10.1.70 |
atmIfPnniRccVcdTdpTableThis attribute is a vector of five traffic parameters whose meanings
are defined by the trafficDescType attribute. The values of peak cell
rate (PCR), sustained cell rate (SCR) and requested shaping rate are
expressed in cell/s. Maximum burst size (MBS) is expressed in
cells. CDVT is expressed in microseconds. The values of PCR,
SCR, MBS and CDVT are used for connection admission control
(CAC). The value of CDVT is only used for connections where the
atmServiceCategory is constantBitRate. For all other values of
atmServiceCategory, CDVT is ignored. The values of PCR, SCR
and requested shaping rate are used to determine the actual shaping
rate where traffic shaping is enabled.
When trafficDescType is 3, parameter 1 represents the PCR for CLP
equal to 0 and 1 traffic; parameter 4 represents the CDVT; and
parameter 5 represents the requested shaping rate. A non-zero value
in parameter 5 overrides any value in parameter 1. This result is
used as the PCR. Parameter 1 must be non-zero. Parameters 2 and 3
must be zero.
When trafficDescType is 6, parameter 1 represents the PCR for CLP
equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP
equal to 0 and 1 traffic; parameter 3 represents the MBS for CLP
equal to 0 and 1 traffic; parameter 4 represents the CDVT; and
parameter 5 represents the requested shaping rate. A non-zero value
in parameter 5 overrides any value in parameter 1. This result is
used as the PCR. Parameters 1, 2, and 3 must be non-zero.
Parameter 1 must be greater than or equal to parameter 2. Parameter
5 must either be zero (unused) or greater than or equal to parameter
2.
When trafficDescType is 7, parameter 1 represents the PCR for CLP
equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP
equal to 0 with cell discard; parameter 3 represents the MBS for
CLP equal to 0 traffic; parameter 4 represents the CDVT; and
parameter 5 represents the requested shaping rate. A non-zero value
in parameter 5 overrides any value in parameter 1. This result is
used as the PCR. Parameters 1, 2, and 3 must be non-zero.
Parameter 1 must be greater than or equal to parameter 2. Parameter
5 must either be zero (unused) or greater than or equal to parameter
2.
When trafficDescType is 8, parameter 1 represents the PCR for CLP
equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP
equal to 0 traffic with cell tagging; parameter 3 represents the MBS
for CLP equal to 0 traffic; parameter 4 represents the CDVT; and
parameter 5 represents the requested shaping rate. A non-zero value
in parameter 5 overrides any value in parameter 1. This result is
used as the PCR. Parameters 1, 2, and 3 must be non-zero.
Parameter 1 must be greater than or equal to parameter 2. Parameter
5 must either be zero (unused) or greater than or equal to parameter
2.
Whenever it is valid for PCR to be specified, parameter 5 may also
be used to specify a requested shaping rate. A non-zero value in
parameter 5 overrides the value in parameter 1 and is used as the
peak cell rate in calculations of CAC and shaping rate.
For trafficDescType 3 the traffic is shaped at the next rate less than
the PCR.
For trafficDescType 6, 7, and 8, the traffic is shaped at the highest
available rate which is between PCR and SCR. However, if there is
no available shaping rate between PCR and SCR, traffic is shaped at
the next rate above the PCR. SEQUENCE OF AtmIfPnniRccVcdTdpEntry .1.3.6.1.4.1.3764.1.1.30.114.96.3.2.387 |
atmIfPnniRccVcdTdpEntryAn entry in the atmIfPnniRccVcdTdpTable. AtmIfPnniRccVcdTdpEntry .1.3.6.1.4.1.3764.1.1.30.114.96.3.2.387.1 |
atmIfPnniRccVcdTdpIndexThis variable represents the atmIfPnniRccVcdTdpTable
specific index for the atmIfPnniRccVcdTdpTable. Integer32 .1.3.6.1.4.1.3764.1.1.30.114.96.3.2.387.1.1 |
atmIfPnniRccVcdTdpValueThis variable represents an individual value for the
atmIfPnniRccVcdTdpTable.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.114.96.3.2.387.1.2 |
atmIfPnniRccProvTableThis group contains the generic provisionable attributes of an Rcc
component. SEQUENCE OF AtmIfPnniRccProvEntry .1.3.6.1.4.1.3764.1.1.30.114.96.3.10 |
atmIfPnniRccProvEntryAn entry in the atmIfPnniRccProvTable. AtmIfPnniRccProvEntry .1.3.6.1.4.1.3764.1.1.30.114.96.3.10.1 |
atmIfPnniRccVciThis attribute specifies the VCI for the Routing Control Channel
(RCC). It is not recommended that the value be changed from the
default of 18 unless absolutely necessary. If a different VCI is
specified, ensure that the RCC at the far end is provisioned to use
the same VCI, otherwise the RCC will not come up.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.114.96.3.10.1.1 |
atmIfPnniRccHlParmsTableThis group contains the provisionable Hello protocol parameters for
an Rcc component. SEQUENCE OF AtmIfPnniRccHlParmsEntry .1.3.6.1.4.1.3764.1.1.30.114.96.3.11 |
atmIfPnniRccHlParmsEntryAn entry in the atmIfPnniRccHlParmsTable. AtmIfPnniRccHlParmsEntry .1.3.6.1.4.1.3764.1.1.30.114.96.3.11.1 |
atmIfPnniRccHelloHoldDownThis attribute is used to limit the rate at which this node sends out
Hello packets. Specifically, it specifies the minimum time between
successive Hellos.
A value of 0 specifies that the value provisioned for the
helloHoldDown attribute of the ARtg Pnni component should be
used.rw FixedPoint1 .1.3.6.1.4.1.3764.1.1.30.114.96.3.11.1.1 |
atmIfPnniRccHelloIntervalThis attribute specifies the duration of the Hello Timer. Every
helloInterval seconds, this node will send out a Hello packet to the
neighbor node, subject to the helloHoldDown timer having expired
at least once since the last Hello packet was sent.
A value of 0 specifies that the value provisioned for the
helloInterval attribute of the ARtg Pnni component should be used.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.114.96.3.11.1.2 |
atmIfPnniRccHelloInactivityFactorThis attribute specifies the number of Hello intervals allowed to
pass without receiving a Hello from the neighbor node, before an
attempt is made to re-stage. The hello inactivity timer is enabled in
the oneWayInside, twoWayInside, oneWayOutside,
twoWayOutside and commonOutside hello states (see the
helloState attribute on the Rcc component for a description of these
states). Note that the value for the Hello interval used in the
calculation is the one specified in the Hello packet from the
neighbor node.
A value of 0 specifies that the value provisioned for the
helloInactivityFactor attribute of the ARtg Pnni component should
be used.
DESCRIPTIONrw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.114.96.3.11.1.3 |
atmIfPnniRccStateTableThis group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. SEQUENCE OF AtmIfPnniRccStateEntry .1.3.6.1.4.1.3764.1.1.30.114.96.3.12 |
atmIfPnniRccStateEntryAn entry in the atmIfPnniRccStateTable. AtmIfPnniRccStateEntry .1.3.6.1.4.1.3764.1.1.30.114.96.3.12.1 |
atmIfPnniRccAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.114.96.3.12.1.1 |
atmIfPnniRccOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.114.96.3.12.1.2 |
atmIfPnniRccUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.114.96.3.12.1.3 |
atmIfPnniRccOperTableThis group contains the operational attributes for an Rcc
component. SEQUENCE OF AtmIfPnniRccOperEntry .1.3.6.1.4.1.3764.1.1.30.114.96.3.13 |
atmIfPnniRccOperEntryAn entry in the atmIfPnniRccOperTable. AtmIfPnniRccOperEntry .1.3.6.1.4.1.3764.1.1.30.114.96.3.13.1 |
atmIfPnniRccTypeThis attribute indicates the role of this link in the PNNI hierarchy.
The following values are possible:
unknown: the Hello protocol has not yet determined the role of the
link.
lowestLevelHorizLink: the link is a horizontal link between two
lowest level nodes.
lowestLevelOutsideLink: the link is an outside link between two
border nodes.
horizontalLinkToLgn: the link is a horizontal link to a Logical
Group Node (LGN).
uplink: the link is a uplink to a higher level LGN.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.114.96.3.13.1.1 |
atmIfPnniRccNegotiatedVersionThis attribute indicates the PNNI version negotiated with the
neighbor node.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.114.96.3.13.1.2 |
atmIfPnniRccHelloStateThis attribute indicates the state of the Hello protocol exchange over
this link. The following are the possible values for this attribute:
down: the link is down; no PNNI routing packets will be sent over
or received over such a link. This is the initial state of the Hello
Finite State Machine, and can also be reached when lower-level
protocols have indicated that the link is not usable.
attempt: no Hello packets or Hello packets, with mismatch
information, have been received recently from the neighbor.
Attempts are made to contact the neighbor node by sending out
Hello packets every helloInterval seconds.
oneWayInside: Hello packets have been recently received from the
neighbor and it has been established that both nodes are members of
the same peer group, but the remote node ID and remote port ID in
the neighbor's Hello packets were set to zero. A Hello packet is sent
to the neighbor and the Hello timer is restarted.
twoWayInside: Bidirectional communication over this link between
this node and the neighbor node has been achieved.
oneWayOutside: Hello packets have been recently received from
the neighbor and it has been established that both nodes are
members of a different peer group, but the remote node ID and
remote port ID in the neighbor's Hello packets were set to zero.
twoWayOutside: Hellos have recently been received from the
neighbor indicating that the neighbor node belongs to a different
peer group. The correct remote node ID and remote port ID fields
were included in the Hello packet, but the nodal hierarchy list did
not include any common peer group. This state can also be reached
if a hierarchy mismatch occurs while in the commonOutside state.
commonOutside: A common level of the routing hierarchy has been
found, in addition to achieving full bi-directional communication
between the two nodes.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.114.96.3.13.1.3 |
atmIfPnniRccRemoteNodeIdThis attribute indicates the neighbor node's node id.ro HexString .1.3.6.1.4.1.3764.1.1.30.114.96.3.13.1.4 |
atmIfPnniRccRemotePortIdThis attribute indicates the neighbor node's port id.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.114.96.3.13.1.5 |
atmIfPnniRccStatsTableThis group contains the statistical attributes for an Rcc component. SEQUENCE OF AtmIfPnniRccStatsEntry .1.3.6.1.4.1.3764.1.1.30.114.96.3.14 |
atmIfPnniRccStatsEntryAn entry in the atmIfPnniRccStatsTable. AtmIfPnniRccStatsEntry .1.3.6.1.4.1.3764.1.1.30.114.96.3.14.1 |
atmIfPnniRccHelloPacketsRxThis attribute counts the total number of Hello packets received
across this RCC, including bad and mismatched Hello packets. The
counter wraps when it exceeds the maximum value.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.114.96.3.14.1.1 |
atmIfPnniRccHelloPacketsTxThis attribute counts the total number of Hello packets transmitted
across this RCC. The counter wraps when it exceeds the maximum
value.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.114.96.3.14.1.2 |
atmIfPnniRccMismatchedHelloPacketsRxThis attribute counts the total number of mismatched Hello packets
received over this RCC. The counter wraps when it exceeds the
maximum value.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.114.96.3.14.1.3 |
atmIfPnniRccBadHelloPacketsRxThis attribute counts the total number of bad Hello packets received
over this RCC. The counter wraps when it exceeds the maximum
value.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.114.96.3.14.1.4 |
atmIfPnniAddr OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.114.96.4 |
atmIfPnniAddrRowStatusTableThis entry controls the addition and deletion of
atmIfPnniAddr components. SEQUENCE OF AtmIfPnniAddrRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.114.96.4.1 |
atmIfPnniAddrRowStatusEntryA single entry in the table represents a single
atmIfPnniAddr component. AtmIfPnniAddrRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.114.96.4.1.1 |
atmIfPnniAddrRowStatusThis variable is used as the basis for SNMP naming of
atmIfPnniAddr components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.96.4.1.1.1 |
atmIfPnniAddrComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.96.4.1.1.2 |
atmIfPnniAddrStorageTypeThis variable represents the storage type value for the
atmIfPnniAddr tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.96.4.1.1.4 |
atmIfPnniAddrAddressIndexThis variable represents an index for the atmIfPnniAddr tables. AsciiStringIndex .1.3.6.1.4.1.3764.1.1.30.114.96.4.1.1.10 |
atmIfPnniAddrAddressTypeIndexThis variable represents an index for the atmIfPnniAddr tables. Enumeration .1.3.6.1.4.1.3764.1.1.30.114.96.4.1.1.11 |
atmIfPnniAddrTermSP OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.114.96.4.2 |
atmIfPnniAddrTermSPRowStatusTableThis entry controls the addition and deletion of
atmIfPnniAddrTermSP components. SEQUENCE OF AtmIfPnniAddrTermSPRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.114.96.4.2.1 |
atmIfPnniAddrTermSPRowStatusEntryA single entry in the table represents a single
atmIfPnniAddrTermSP component. AtmIfPnniAddrTermSPRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.114.96.4.2.1.1 |
atmIfPnniAddrTermSPRowStatusThis variable is used as the basis for SNMP naming of
atmIfPnniAddrTermSP components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.96.4.2.1.1.1 |
atmIfPnniAddrTermSPComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.96.4.2.1.1.2 |
atmIfPnniAddrTermSPStorageTypeThis variable represents the storage type value for the
atmIfPnniAddrTermSP tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.96.4.2.1.1.4 |
atmIfPnniAddrTermSPIndexThis variable represents the index for the atmIfPnniAddrTermSP tables. NonReplicated .1.3.6.1.4.1.3764.1.1.30.114.96.4.2.1.1.10 |
atmIfPnniAddrPnniInfo OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.114.96.4.3 |
atmIfPnniAddrPnniInfoRowStatusTableThis entry controls the addition and deletion of
atmIfPnniAddrPnniInfo components. SEQUENCE OF AtmIfPnniAddrPnniInfoRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.114.96.4.3.1 |
atmIfPnniAddrPnniInfoRowStatusEntryA single entry in the table represents a single
atmIfPnniAddrPnniInfo component. AtmIfPnniAddrPnniInfoRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.114.96.4.3.1.1 |
atmIfPnniAddrPnniInfoRowStatusThis variable is used as the basis for SNMP naming of
atmIfPnniAddrPnniInfo components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.96.4.3.1.1.1 |
atmIfPnniAddrPnniInfoComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.96.4.3.1.1.2 |
atmIfPnniAddrPnniInfoStorageTypeThis variable represents the storage type value for the
atmIfPnniAddrPnniInfo tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.114.96.4.3.1.1.4 |
atmIfPnniAddrPnniInfoIndexThis variable represents the index for the atmIfPnniAddrPnniInfo tables. NonReplicated .1.3.6.1.4.1.3764.1.1.30.114.96.4.3.1.1.10 |
atmIfPnniAddrPnniInfoProvTableThis attribute group contains the provisioned attributes relating to
PNNI for a PnniInfo component. SEQUENCE OF AtmIfPnniAddrPnniInfoProvEntry .1.3.6.1.4.1.3764.1.1.30.114.96.4.3.10 |
atmIfPnniAddrPnniInfoProvEntryAn entry in the atmIfPnniAddrPnniInfoProvTable. AtmIfPnniAddrPnniInfoProvEntry .1.3.6.1.4.1.3764.1.1.30.114.96.4.3.10.1 |
atmIfPnniAddrPnniInfoScopeThis attribute specifies the scope of the ATM address, which is the
highest level up to which this address will be advertised in the
PNNI hierarchy. The scope must be set to a value numerically less
than or equal to the level of the lowest level peer group containing
this node. Setting the scope to 0 will cause the address to be
advertised globally within this PNNI routing domain.rw INTEGER (-1..104) .1.3.6.1.4.1.3764.1.1.30.114.96.4.3.10.1.1 |
atmIfPnniAddrPnniInfoReachabilityThis attribute indicates whether the address is internal or exterior.
An internal reachable address is an address of a destination that is
directly attached to the logical node advertising the address. An
exterior reachable address is an address that can be reached
through a PNNI routing domain, but which is not located in that
PNNI routing domain.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.114.96.4.3.10.1.2 |
atmIfPnniAddrOperTableThis attribute group contains the operational attributes for the
Address component. SEQUENCE OF AtmIfPnniAddrOperEntry .1.3.6.1.4.1.3764.1.1.30.114.96.4.10 |
atmIfPnniAddrOperEntryAn entry in the atmIfPnniAddrOperTable. AtmIfPnniAddrOperEntry .1.3.6.1.4.1.3764.1.1.30.114.96.4.10.1 |
atmIfPnniAddrScopeThis attribute indicates the scope of the ATM address, which is the
highest level to which this address will be advertised in the PNNI
hierarchy. If no PnniInfo subcomponent has been provisioned, then
the scope will default to the level of this node in the PNNI
hierarchy. If this node does not participate in a PNNI hierarchy, then
this attribute will have the value of -1.ro INTEGER (-1..104) .1.3.6.1.4.1.3764.1.1.30.114.96.4.10.1.1 |
atmIfPnniAddrReachabilityThis attribute indicates whether the address is internal or exterior.
An internal reachable address is an address of a destination that is
directly attached to the logical node advertising the address. An
exterior reachable address is an address that can be reached
through a PNNI routing domain, but which is not located in that
PNNI routing domain.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.114.96.4.10.1.2 |
atmIfPnniProvTableThis group contains the provisionable attributes for the Pnni
component. SEQUENCE OF AtmIfPnniProvEntry .1.3.6.1.4.1.3764.1.1.30.114.96.10 |
atmIfPnniProvEntryAn entry in the atmIfPnniProvTable. AtmIfPnniProvEntry .1.3.6.1.4.1.3764.1.1.30.114.96.10.1 |
atmIfPnniSoftPvcRetryPeriodThis attribute represents the time in seconds to wait between call
setup retries. The resolution is to the nearest 10 seconds.
This attribute has been obsoleted and is replaced by the
softPvpAndPvcRetryPeriod attribute.rwobsolete Unsigned32 .1.3.6.1.4.1.3764.1.1.30.114.96.10.1.1 |
atmIfPnniSoftPvpAndPvcRetryPeriodThis attribute represents the time in seconds to wait between soft
PVP or soft PVC call setup retries. The resolution is to the nearest
10 seconds.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.114.96.10.1.2 |
atmIfPnniSoftPvpAndPvcHoldOffTimeThis attribute specifies how long to hold off retries following a
release or the connection. The resolution is to the nearest 50 ms.rw Unsigned32 (0 | 50..20000) .1.3.6.1.4.1.3764.1.1.30.114.96.10.1.5 |
atmIfPnniAdminWeightsTableThis group contains the provisionable administrative weights for the
Pnni component. These weights will be used by Generic
Connection Admission Control (GCAC) if administrative weight is
the selected optimization criterion. SEQUENCE OF AtmIfPnniAdminWeightsEntry .1.3.6.1.4.1.3764.1.1.30.114.96.11 |
atmIfPnniAdminWeightsEntryAn entry in the atmIfPnniAdminWeightsTable. AtmIfPnniAdminWeightsEntry .1.3.6.1.4.1.3764.1.1.30.114.96.11.1 |
atmIfPnniCbrWeightThis attribute specifies the administrative weight assigned for
setting up switched calls with a service category of Constant Bit
Rate (CBR) for this PNNI interface. The value specified will be
used by Generic Connection Admission Control (GCAC) if
administrative weight is the selected optimization criterion; the
higher the value, the less desirable the link will be in path selection.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.114.96.11.1.1 |
atmIfPnniRtVbrWeightThis attribute specifies the administrative weight assigned for
setting up switched calls with a service category of Real-Time
Variable Bit Rate (RT-VBR) for this PNNI interface. The value
specified will be used by Generic Connection Admission Control
(GCAC) if administrative weight is the selected optimization
criterion; the higher the value, the less desirable the link will be in
path selection.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.114.96.11.1.2 |
atmIfPnniNrtVbrWeightThis attribute specifies the administrative weight assigned for
setting up switched calls with a service category of Non Real-Time
Variable Bit Rate (NRT-VBR) for this PNNI interface. The value
specified will be used by Generic Connection Admission Control
(GCAC) if administrative weight is the selected optimization
criterion; the higher the value, the less desirable the link will be in
path selection.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.114.96.11.1.3 |
atmIfPnniUbrWeightThis attribute specifies the administrative weight assigned for
setting up switched calls with a service category of Unspecified Bit
Rate (UBR) for this PNNI interface. The value specified will be
used by Generic Connection Admission Control (GCAC) if
administrative weight is the selected optimization criterion; the
higher the value, the less desirable the link will be in path selection.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.114.96.11.1.4 |
atmIfPnniAcctOptTableThis group contains the provisionable attributes for accounting. SEQUENCE OF AtmIfPnniAcctOptEntry .1.3.6.1.4.1.3764.1.1.30.114.96.12 |
atmIfPnniAcctOptEntryAn entry in the atmIfPnniAcctOptTable. AtmIfPnniAcctOptEntry .1.3.6.1.4.1.3764.1.1.30.114.96.12.1 |
atmIfPnniAccountCollectionThis attribute is used to turn accounting on or off for SVC and
SPVC connections. It also specifies the reason(s) for which
accounting data is collected: billing, test, study, audit, or force.
If the set of reasons is not empty then accounting records will be
generated by this interface in the following situations:
- on a TODA changeover if TODA is enabled;
- every 12 hours (per connection) if TODA is disabled;
- on every call clear (a call record with final cell counts).
If none of the reasons is present, then accounting will be
suppressed.
The reason for collection is recorded in the accounting record, in
the attribute callingCollectReason or calledCollectReason as
appropriate.
Description of bits:
bill(0)
test(1)
study(2)
audit(3)
force(4)rw OCTET STRING .1.3.6.1.4.1.3764.1.1.30.114.96.12.1.1 |
atmIfPnniAccountConnectionTypeThis attribute specifies whether accounting records generated by
this interface should be marked as originating, terminating or
intermediate. This attribute, in combination with the direction of the
call, determines the value of attribute connPointType of the
accounting record and may be used by downstream accounting
processes to correlate the records.
If the value is origTerm then records generated for incoming calls
will be marked as originating and records generated for outgoing
calls will be marked as terminating.
If the value is intermediate then records generated for all calls will
be marked as intermediate.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.114.96.12.1.2 |
atmIfPnniAccountClassThis attribute specifies the accounting class associated with the
interface. Its meaning is determined by the network operator.
Its value is simply recorded in the accounting records generated by
this interface, in the attribute callingServiceType or
calledServiceType as appropriate.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.114.96.12.1.3 |
atmIfPnniServiceExchangeThis attribute specifies the data service exchange associated with
this interface. Its meaning is determined by the network operator.
Its value is simply recorded in the accounting records generated by
this interface, in the attribute callingDse or calledDse as
appropriate.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.114.96.12.1.4 |
atmIfPnniOperationalTableThis group contains the operational attributes for a Pnni component. SEQUENCE OF AtmIfPnniOperationalEntry .1.3.6.1.4.1.3764.1.1.30.114.96.13 |
atmIfPnniOperationalEntryAn entry in the atmIfPnniOperationalTable. AtmIfPnniOperationalEntry .1.3.6.1.4.1.3764.1.1.30.114.96.13.1 |
atmIfPnniPortIdThis attribute indicates the port id of the PNNI interface, which is
the parent AtmIf's instance number.ro Unsigned32 .1.3.6.1.4.1.3764.1.1.30.114.96.13.1.1 |