Nortel-Magellan-Passport-AtmMpeMIB
AI MIB Summary
Standard SNMP MIB module defining data structures for Nortel-Magellan-Passport-AtmMpeMIB.
68
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
68 total| Object Name |
|---|
atmMpeMIB OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.65 |
IMPORTS Unknown .1.3.6.1.4.1.562.2.4.2.65 |
atmMpeGroup OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.65.1 |
atmMpeGroupBD OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.65.1.4 |
atmMpeGroupBD00 OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.65.1.4.1 |
atmMpeGroupBD00A OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.65.1.4.1.2 |
atmMpeCapabilities OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.65.3 |
atmMpeCapabilitiesBD OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.65.3.4 |
atmMpeCapabilitiesBD00 OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.65.3.4.1 |
atmMpeCapabilitiesBD00A OBJECT IDENTIFIER .1.3.6.1.4.1.562.2.4.2.65.3.4.1.2 |
atmMpe OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.118 |
atmMpeRowStatusTableThis entry controls the addition and deletion of
atmMpe components. SEQUENCE OF AtmMpeRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.118.1 |
atmMpeRowStatusEntryA single entry in the table represents a single
atmMpe component. AtmMpeRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.118.1.1 |
atmMpeRowStatusThis variable is used as the basis for SNMP naming of
atmMpe components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.118.1.1.1 |
atmMpeComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.118.1.1.2 |
atmMpeStorageTypeThis variable represents the storage type value for the
atmMpe tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.118.1.1.4 |
atmMpeIndexThis variable represents the index for the atmMpe tables. Integer32 .1.3.6.1.4.1.3764.1.1.30.118.1.1.10 |
atmMpeAc OBJECT IDENTIFIER .1.3.6.1.4.1.3764.1.1.30.118.2 |
atmMpeAcRowStatusTableThis entry controls the addition and deletion of
atmMpeAc components. SEQUENCE OF AtmMpeAcRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.118.2.1 |
atmMpeAcRowStatusEntryA single entry in the table represents a single
atmMpeAc component. AtmMpeAcRowStatusEntry .1.3.6.1.4.1.3764.1.1.30.118.2.1.1 |
atmMpeAcRowStatusThis variable is used as the basis for SNMP naming of
atmMpeAc components.
These components can be added and deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.118.2.1.1.1 |
atmMpeAcComponentNameThis variable provides the component's string name for
use with the ASCII Console Interfacero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.118.2.1.1.2 |
atmMpeAcStorageTypeThis variable represents the storage type value for the
atmMpeAc tables.ro StorageType (SNMPv2-TC) .1.3.6.1.4.1.3764.1.1.30.118.2.1.1.4 |
atmMpeAcIndexThis variable represents the index for the atmMpeAc tables. Integer32 .1.3.6.1.4.1.3764.1.1.30.118.2.1.1.10 |
atmMpeAcProvTableThis group contains the provisioned attributes for the
AtmConnection component. SEQUENCE OF AtmMpeAcProvEntry .1.3.6.1.4.1.3764.1.1.30.118.2.10 |
atmMpeAcProvEntryAn entry in the atmMpeAcProvTable. AtmMpeAcProvEntry .1.3.6.1.4.1.3764.1.1.30.118.2.10.1 |
atmMpeAcAtmConnectionThis attribute specifies the Atm nailed up endpoint, AtmIf/n Vcc/
vpi.vci Nep, that this connection is associated with.rw Link .1.3.6.1.4.1.3764.1.1.30.118.2.10.1.1 |
atmMpeAcIpCoSThis attribute specifies the Class of Service (CoS) given to each
packet received on an ATM connection.
The initial CoS given to a packet may be overridden when the
cosPolicyAssignment attribute is defined on either the IpPort
component of the ProtocolPort linked to the ATM MPE or the Ip
component of the protocol port's VirtualRouter.
When a packet is to be transmitted on an ATM MPE protocol port
where multiple connections are available for the packet's next hop,
the packet is forwarded on the connection where the ipCos value
matches the CoS of the packet. When the packets' CoS does not
match the ipCos value of any of the available connections, the
packet is forwarded using next lowest CoS; failing this, the packet
is forwarded using the next highest CoS.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.118.2.10.1.2 |
atmMpeAcStateTableThis group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. SEQUENCE OF AtmMpeAcStateEntry .1.3.6.1.4.1.3764.1.1.30.118.2.11 |
atmMpeAcStateEntryAn entry in the atmMpeAcStateTable. AtmMpeAcStateEntry .1.3.6.1.4.1.3764.1.1.30.118.2.11.1 |
atmMpeAcAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.118.2.11.1.1 |
atmMpeAcOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.118.2.11.1.2 |
atmMpeAcUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.118.2.11.1.3 |
atmMpeAcOperTableThis group contains the operational attributes for the
AtmConnection component. SEQUENCE OF AtmMpeAcOperEntry .1.3.6.1.4.1.3764.1.1.30.118.2.12 |
atmMpeAcOperEntryAn entry in the atmMpeAcOperTable. AtmMpeAcOperEntry .1.3.6.1.4.1.3764.1.1.30.118.2.12.1 |
atmMpeAcSpeedThis attribute indicates the approximate bit rate for the connection.
The bit rate is determined from the cell rate provisioned for the Vcc
linked to this connection. The cell rate is multiplied by 53 bytes per
cell and 8 bits per byte to obtain the bit rate. The ifSpeed of the
entry in the ifTable corresponding to the AtmMpe component is the
lowest speed of all the connections associated with the AtmMpe
component.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.118.2.12.1.1 |
atmMpeAcStatsTableThis group contains the frame based statistics maintained for the
AtmConnection component. For cell based statistics, see the Vcc
component. SEQUENCE OF AtmMpeAcStatsEntry .1.3.6.1.4.1.3764.1.1.30.118.2.13 |
atmMpeAcStatsEntryAn entry in the atmMpeAcStatsTable. AtmMpeAcStatsEntry .1.3.6.1.4.1.3764.1.1.30.118.2.13.1 |
atmMpeAcOutPacketsThis attribute counts the total number of packets sent on this
connection. This counter will wrap around to 0 when it exceeds its
maximum count.ro Counter32 .1.3.6.1.4.1.3764.1.1.30.118.2.13.1.1 |
atmMpeAcOutOctetsThis attribute counts the total number of octets sent on this
connection. This counter will wrap around to 0 when it exceeds its
maximum count.
DESCRIPTIONro Counter32 .1.3.6.1.4.1.3764.1.1.30.118.2.13.1.2 |
atmMpeAcOutDiscardsThis attribute counts the total number of packets which were
supposed to be sent on this connection but were discarded due to
congestion or the connection being down. This counter will wrap
around to 0 when it exceeds its maximum count.
DESCRIPTIONro Counter32 .1.3.6.1.4.1.3764.1.1.30.118.2.13.1.3 |
atmMpeAcInPacketsThis attribute counts the total number of packets received on this
connection. This counter will wrap around to 0 when it exceeds its
maximum count.
DESCRIPTIONro Counter32 .1.3.6.1.4.1.3764.1.1.30.118.2.13.1.4 |
atmMpeAcInOctetsThe attribute counts the total number of octets received on this
connection. This counter will wrap around to 0 when it exceeds its
maximum count.
DESCRIPTIONro Counter32 .1.3.6.1.4.1.3764.1.1.30.118.2.13.1.5 |
atmMpeAcInUnknownProtosThis attribute counts the total number of packets received on this
connection which were discarded because they contained an
unknown or unsupported protocol (includes packets received for
protocols not currently bound to the associated ProtocolPort
component). This counter will wrap around to 0 when it exceeds its
maximum count.
DESCRIPTIONro Counter32 .1.3.6.1.4.1.3764.1.1.30.118.2.13.1.6 |
atmMpeAcInErrorsThis attribute counts the total number of packets received on the
connection which contained errors preventing them from being
delivered to a higher-layer protocol (includes short frames). This
counter will wrap around to 0 when it exceeds its maximum count.
DESCRIPTIONro Counter32 .1.3.6.1.4.1.3764.1.1.30.118.2.13.1.7 |
atmMpeCidDataTableThis group contains the attribute for a component's Customer
Identifier (CID). Refer to the attribute description for a detailed
explanation of CIDs. SEQUENCE OF AtmMpeCidDataEntry .1.3.6.1.4.1.3764.1.1.30.118.10 |
atmMpeCidDataEntryAn entry in the atmMpeCidDataTable. AtmMpeCidDataEntry .1.3.6.1.4.1.3764.1.1.30.118.10.1 |
atmMpeCustomerIdentifierThis attribute holds the Customer Identifier (CID).
Every component has a CID. If a component has a cid attribute, the
component's CID is the provisioned value of that attribute;
otherwise the component inherits the CID of its parent. The top-
level component has a CID of 0.
Every operator session also has a CID, which is the CID
provisioned for the operator's user ID. An operator will see only the
stream data for components having a matching CID. Also, the
operator will be allowed to issue commands for only those
components which have a matching CID.
An operator CID of 0 is used to identify the Network Manager
(referred to as 'NetMan' in DPN). This CID matches the CID of
any component. Values 1 to 8191 inclusive (equivalent to 'basic
CIDs' in DPN) may be assigned to specific customers.rw Unsigned32 (0 | 1..8191) .1.3.6.1.4.1.3764.1.1.30.118.10.1.1 |
atmMpeIfEntryTableThis group contains the provisionable attributes for the ifEntry. SEQUENCE OF AtmMpeIfEntryEntry .1.3.6.1.4.1.3764.1.1.30.118.11 |
atmMpeIfEntryEntryAn entry in the atmMpeIfEntryTable. AtmMpeIfEntryEntry .1.3.6.1.4.1.3764.1.1.30.118.11.1 |
atmMpeIfAdminStatusThe desired state of the interface. The up state indicates the
interface is operational. The down state indicates the interface is not
operational. The testing state indicates that no operational packets
can be passed.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.118.11.1.1 |
atmMpeIfIndexThis is the index for the IfEntry. Its value is automatically initialized
during the provisioning process.ro InterfaceIndex .1.3.6.1.4.1.3764.1.1.30.118.11.1.2 |
atmMpeProvTableThis group contains the provisioned attributes for the AtmMpe
component. SEQUENCE OF AtmMpeProvEntry .1.3.6.1.4.1.3764.1.1.30.118.12 |
atmMpeProvEntryAn entry in the atmMpeProvTable. AtmMpeProvEntry .1.3.6.1.4.1.3764.1.1.30.118.12.1 |
atmMpeMaxTransmissionUnitThis attribute sets the size of the largest datagram which can be sent
on the interface. This includes the size of the Logical Link Control
header (if applicable) as well as the protocol data unit.rw Unsigned32 .1.3.6.1.4.1.3764.1.1.30.118.12.1.1 |
atmMpeEncapTypeThis attribute specifies the rfc1483 encapsulation type to be used for
the AtmConnections under this AtmMpe. Specifying llcEncap
allows multiplexing of multiple protocols over the VCCs. The
protocol of the carried PDU will be identified by an IEEE 802.2
Logical Link Control header. If Bridging or Inverse ARP is to be
carried over a VCC, llcEncap must be used. Specifying ipVcEncap
or ipxVcEncap indicates that all the VCCs (i.e. AtmConnections)
under an AtmMpe component will use VC based multiplexing and
will carry IP or IPX PDUs only. Thus an IpxPort cannot be
provisioned under a protocol port linked to an AtmMpe component
with encapsulation type of ipVcEncap. Similarly, an IpPort cannot
be provisioned under a protocol port linked to an AtmMpe
component with encapsulation type of ipxVcEncap.rw Enumeration .1.3.6.1.4.1.3764.1.1.30.118.12.1.2 |
atmMpeIlsForwarderThis attribute specifies the IlsForwarder component this AtmMpe
component is using.rw Link .1.3.6.1.4.1.3764.1.1.30.118.12.1.3 |
atmMpeMediaProvTableThis group contains the base provisioning data for the Atm Mpe
component. SEQUENCE OF AtmMpeMediaProvEntry .1.3.6.1.4.1.3764.1.1.30.118.13 |
atmMpeMediaProvEntryAn entry in the atmMpeMediaProvTable. AtmMpeMediaProvEntry .1.3.6.1.4.1.3764.1.1.30.118.13.1 |
atmMpeLinkToProtocolPortThis attribute contains a protocol port component name. The
attribute associates an AtmMpe application with a protocol port.rw Link .1.3.6.1.4.1.3764.1.1.30.118.13.1.1 |
atmMpeStateTableThis group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide. SEQUENCE OF AtmMpeStateEntry .1.3.6.1.4.1.3764.1.1.30.118.14 |
atmMpeStateEntryAn entry in the atmMpeStateTable. AtmMpeStateEntry .1.3.6.1.4.1.3764.1.1.30.118.14.1 |
atmMpeAdminStateThis attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.118.14.1.1 |
atmMpeOperationalStateThis attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.118.14.1.2 |
atmMpeUsageStateThis attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.118.14.1.3 |
atmMpeOperStatusTableThis group includes the Operational Status attribute. This attribute
defines the current operational state of this component. SEQUENCE OF AtmMpeOperStatusEntry .1.3.6.1.4.1.3764.1.1.30.118.15 |
atmMpeOperStatusEntryAn entry in the atmMpeOperStatusTable. AtmMpeOperStatusEntry .1.3.6.1.4.1.3764.1.1.30.118.15.1 |
atmMpeSnmpOperStatusThe current state of the interface. The up state indicates the
interface is operational and capable of forwarding packets. The
down state indicates the interface is not operational, thus unable to
forward packets. testing state indicates that no operational packets
can be passed.ro Enumeration .1.3.6.1.4.1.3764.1.1.30.118.15.1.1 |